OpenVixDiskLib/docs/nfc_write.md

VDDK NFC disk write

This document records how OpenVixDiskLib (NfcDisk.write in openvixdisklib/nfc_open.py) implements VixDiskLib_Write over NFC AIO. The request layout matches the captured VixDiskLib_Read IO message in docs/nfc_read.md (write requests use the same fragment fields as read replies). Open flags and the IO direction field were taken from a strace of VDDK 8 writing one sector to a temporary 10 GiB disk (docs/reverse_engineering_procedure.md).

The public VixDiskLib_Write prototype is in .vddk/vixDiskLib.h:

VixError VixDiskLib_Write(VixDiskLibHandle diskHandle,
                          VixDiskLibSectorType startSector,
                          VixDiskLibSectorType numSectors,
                          const uint8 *writeBuffer);

ConnectEx(..., Bool readOnly, ...) with readOnly=FALSE and Open without VIXDISKLIB_FLAG_OPEN_READ_ONLY (that flag is 1 << 2 in the same header) is what produces the writable NFC open below. The ticket must be NfcRandomAccessOpenDisk (docs/nfc_auth.md); flags 0x1a on a NfcGetVmFiles ticket are rejected as VIX_E_FILE_READ_ONLY.

Mapping from VDDK

Units on the wire are bytes, as for reads:

offset = startSector * sectorSize
length = numSectors * sectorSize

VDDK call	Wire effect
Open without VIXDISKLIB_FLAG_OPEN_READ_ONLY	OPEN_FILE flags 0x1a
Open with VIXDISKLIB_FLAG_OPEN_READ_ONLY	OPEN_FILE flags 0x1e (read-only)
VixDiskLib_Write(h, start, n, buf)	IO opcode 0, then n * 512 data bytes
VixDiskLib_Read(h, start, n, buf)	IO opcode 1

0x1e vs 0x1a is bit 0x04, the same value as VIXDISKLIB_FLAG_OPEN_READ_ONLY. Writable opens clear that bit.

VDDK also issues several DDB_GET queries and a type-10 GET_FILE_INFO (longContentID) before the first write. They are not required to write or read sectors.

Request (44 bytes + data)

Little-endian, after the usual 16-byte AIO header (magic 0xA100DA7A, type 7, size 44, one opId per VixDiskLib_Write):

Offset	Type	Write(start, n)
0	uint64	File handle from OPEN_FILE
8	uint64	0 (NFC_AIO_IO_WRITE; read uses 1)
16	uint64	Byte offset of the whole write
24	uint32	Total byte length
28	uint32	Byte offset of this fragment (0, 65536, …)
32	uint32	This fragment’s uncompressed length
36	uint32	Extra size (same as 32, or FastLZ packed size)
40	uint32	0

This is the same 44-byte layout as a read reply fragment (docs/nfc_read.md): writes stream request fragments, reads stream reply fragments. A single-fragment write (≤ 64 KiB) still looks like a uint64 length at offset 24 because the fragment offset is 0.

FASTLZ writes use the same header. The opcode uint64 high half is 2, offset 36 is the compressed size, and FastLZ bytes follow instead of raw sectors. If compression does not shrink the fragment, VDDK sends type 0 and raw extra. Each fragment is compressed on its own; a 32 MiB FastLZ write is 512 independent FastLZ extras, not one.

Sector bytes follow the 44-byte payload and are not counted in AIO size. OpenVixDiskLib sends header + payload + extra in one sendall and sets TCP_NODELAY on the NFC socket so a small FastLZ extra is not delayed behind Nagle / delayed ACK. Captured VDDK often uses two write()s (60 then 65536) for a 64 KiB fragment and coalesces only a 512-byte tail (572 = 16 + 44 + 512).

A 1-sector VDDK write was 572 bytes on the wire: 16 + 44 + 512.

Fragments and the single reply

NfcAioInitSession advertises a 64 KiB buffer. Extra per type-7 message is at most that size. VDDK does not issue a new opId per chunk, and it does not coalesce separate VixDiskLib_Write calls (eight 8 KiB writes stayed eight IOs). One public write becomes N client type-7 messages with the same opId, then one 44-byte reply (no extra) after the last fragment:

C: type=7 opId=14 size=44  total=66048 dest=0     chunk=65536  + 65536 data
C: type=7 opId=14 size=44  total=66048 dest=65536 chunk=512    + 512 data
S: type=7 opId=14 size=44  total=66048 dest=0     chunk=66048

A 32 MiB write is 512 client fragments and one ACK. OpenVixDiskLib does the same. An earlier attempt that used a distinct opId per 64 KiB chunk and a sliding window of 4–512 outstanding IOs was waiting for one reply per chunk; raising the window did not match VDDK throughput because VDDK pays one RTT per Write, not per fragment.

NfcAioFlushCoalescedWrites is server-side (nfcAioServer.c), not a client merge of API writes. OPEN_SESSION is 16 zero bytes both ways, so the logged AIO buffer count of 4 is a VDDK client default (vixDiskLib.nfcAio.Session.BufCount), not a server cap.

OpenVixDiskLib

NfcDisk.write(start_sector, num_sectors, data) in openvixdisklib/nfc_open.py. open_disk(..., read_only=False) selects flags 0x1a. The drop-in handle exposes the same shape as VDDK: connect(read_only=False), open without VIXDISKLIB_FLAG_OPEN_READ_ONLY, then write.

Integration tests create an empty 10 GiB disk, write known patterns, and read them back (tests/integration/test_nfc_read_write.py, tests/integration/test_openvixdisklib.py). Cross-check tests write with VDDK and with OpenVixDiskLib and read with both (tests/integration/test_crosscheck.py).