perf(epa_ppls): make the monthly refresh fit the runner's 3 h budget (#3)
Image rebuild (skip scrape) / build (push) Successful in 1h46m17s
Image rebuild (skip scrape) / build (push) Successful in 1h46m17s
Co-authored-by: claude <[email protected]>
This commit was merged in pull request #3.
This commit is contained in:
+200
-241
@@ -4,84 +4,80 @@
|
||||
- Registrant: LOVELAND PRODUCTS, INC.
|
||||
- Signal word: Caution
|
||||
- Active ingredients: Fludioxonil (2.36%); Metalaxyl (15%)
|
||||
- Label accepted: 2023-10-03
|
||||
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/034704-01085-20231003.pdf
|
||||
- Label accepted: 2026-06-30
|
||||
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/034704-01085-20260630.pdf
|
||||
|
||||
---
|
||||
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY
|
||||
WASHINGTON, DC 20460
|
||||
OFFICE OF CHEMICAL SAFETY
|
||||
AND POLLUTION PREVENTION
|
||||
June 30, 2026
|
||||
|
||||
Notification ABN or Label Acceptable v.20220527
|
||||
October 3, 2023
|
||||
Lindsay DeMers, PhD
|
||||
Agent for Loveland Products, Inc
|
||||
c/o Pyxis Regulatory Consulting Inc.
|
||||
535 Dock St. Ste 211
|
||||
Tacoma, WA 98402
|
||||
|
||||
Arianna Shorey
|
||||
Regulatory Consultant
|
||||
Loveland Products, Inc.
|
||||
c/o Pyxis Regulatory Consulting
|
||||
4110 136
|
||||
th St. Ct. NW
|
||||
Gig Harbor, WA 98332
|
||||
|
||||
Subject: Notification per PRN 98-10 – Minor label changes including grammatical
|
||||
revisions throughout label, adding emergency contact information, optional
|
||||
referral statements, optional logos, and other minor updates.
|
||||
Subject: Label Amendment - Registration Review Mitigation for Metalaxyl/Mefenoxam
|
||||
and Fludioxonil
|
||||
Product Name: Dyna-Shield FM
|
||||
EPA Registration Number: 34704-1085
|
||||
Application Date: June 12, 2023
|
||||
Decision Number: 592822
|
||||
EP A Registration Number: 34704-1085
|
||||
Case Number: 671546 and 692702
|
||||
Application Date: September 28, 2020 and March 31, 2026
|
||||
|
||||
Dear Arianna Shorey:
|
||||
Dear Lyndsay DeMers:
|
||||
|
||||
The Agency is in receipt of your Application for Pesticide Notification under Pesticide
|
||||
Registration Notice (PRN) 98-10 for the above referenced product. The Registration Division
|
||||
(RD) has conducted a review of this request for its applicability under PRN 98-10 and finds that
|
||||
the action requested falls within the scope of PRN 98-10.
|
||||
The Agency, in accordance with the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA),
|
||||
as amended, has completed reviewing all the information submitted with your application to
|
||||
support the Registration Review of the above referenced product in connection with the
|
||||
Metalaxyl/Mefenoxam and Fludioxonil Interim Decisions, and has concluded that your
|
||||
submission is acceptable. The label referred to above, submitted in connection with registration
|
||||
under FIFRA, as amended, is acceptable.
|
||||
|
||||
The label submitted with the application has been stamped “NOTIFICATION” and placed in our
|
||||
records.
|
||||
Should you wish to add/retain a reference to the company’s website on your label, then please
|
||||
be aware that the website becomes labeling under the Federal Insecticide, Fungicide, and
|
||||
Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the
|
||||
product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E).
|
||||
40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In
|
||||
addition, regardless of whether a website is referenced on your product’s label, claims made on
|
||||
the website may not substantially differ from those claims approved through the registration
|
||||
process. Therefore, should the Agency find or if it is brought to our attention that a website
|
||||
contains false or misleading statements or claims substantially differing from the EPA approved
|
||||
registration, the website will be referred to the EPA’s Office of Enforcement and Compliance
|
||||
Assurance.
|
||||
|
||||
Should you wish to add/retain a reference to the company’s website on your label, then please be
|
||||
aware that the website becomes labeling under the Federal Insecticide, Fungicide, and
|
||||
Rodenticide Act (FIFRA) and is subject to review by the Agency. If the website is false or
|
||||
misleading, the product would be misbranded and unlawful to sell or distribute under FIFRA
|
||||
section 12(a)(1)(E). 40 CFR 156.10(a)(5) lists examples of statements EPA may consider false or
|
||||
misleading. In addition, regardless of whether a website is referenced on your product’s label,
|
||||
claims made on the website may not substantially differ from those claims approved through the
|
||||
registration process. Therefore, should the Agency find or if it is brought to our attention that a
|
||||
website contains false or misleading statements or claims substantially differing from the EPA
|
||||
approved registration, the website will be referred to the EPA’s Office of Enforcement and
|
||||
Compliance.
|
||||
|
||||
If you have any questions, please contact Stephanie Suarez at 202-566-2918 or at
|
||||
Suarez.Stephanie@epa.gov.
|
||||
A stamped copy of your labeling is enclosed for your records. This labeling supersedes
|
||||
all previously accepted labeling and must be used at your next label printing. You must
|
||||
|
||||
Page 2 of 2
|
||||
EPA Reg. No. 34704-1085
|
||||
Decision No. 592822
|
||||
Case No. 671546 and 692702
|
||||
|
||||
submit one copy of the final printed labeling before you release the product for
|
||||
shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may
|
||||
distribute or sell this product under the previously approved labeling for 12 months
|
||||
from the date of this letter. After 12 months, you may only distribute or sell this
|
||||
product if it bears this new revised labeling or subsequently approved labeling. “To
|
||||
distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation
|
||||
at 40 CFR 152.3.
|
||||
|
||||
If you have any questions about this letter, please contact Concepción Rodríguez by phone at
|
||||
202-566-0820, or via email at rodriguez.concepcion@epa.gov.
|
||||
|
||||
S i n c e r e l y ,
|
||||
|
||||
|
||||
Julie Javier, Team Leader
|
||||
Risk Mitigation and Implementation Branch 4
|
||||
Pesticide Re-Evaluation Division
|
||||
Office of Pesticide Programs
|
||||
|
||||
Sincerely,
|
||||
|
||||
|
||||
|
||||
Stephanie Suarez, Ph.D., Plant Pathologist
|
||||
Fungicide Branch
|
||||
Registration Division (7505T)
|
||||
Office of Pesticide Programs
|
||||
ENCLOSURE: Stamped label
|
||||
|
||||
Page 1
|
||||
|
||||
{Note to reviewer: [Text] in brackets denotes optional text. {Text} in braces denotes where in the final
|
||||
label text will appear and notes to reviewer.}
|
||||
|
||||
|
||||
[Page 1]
|
||||
Dyna-Shield® FM
|
||||
For use as a seed treatment for protection of seed and seedlings
|
||||
against listed diseases[.]
|
||||
|
||||
ACTIVE INGREDIENT:
|
||||
Metalaxyl .............................................................................................................................................. 15.00%
|
||||
Fludioxonil ............................................................................................................................................. 2.36%
|
||||
@@ -89,60 +85,54 @@ OTHER INGREDIENTS: .............................................................
|
||||
TOTAL: 100.00%
|
||||
Contains 1.34 lbs metalaxyl and 0.21 lbs fludioxonil per gallon.
|
||||
KEEP OUT OF REACH OF CHILDREN
|
||||
CAUTION/PRECAICION
|
||||
CAUTION/PRECAUCIÓN
|
||||
FIRST AID
|
||||
If swallowed: • Call a poison control center or doctor immediately for treatment advice.
|
||||
• Have person sip a glass of water if able to swallow.
|
||||
• DO NOT induce vomiting unless told to by a poison control center or doctor.
|
||||
• DO NOT give anything by mouth to an unconscious person.
|
||||
If swallowed: xCall a poison control center or doctor immediately for treatment advice.
|
||||
xHave person sip a glass of water if able to swallow.
|
||||
xDO NOT induce vomiting unless told to by a poison control center or doctor.
|
||||
xDO NOT give anything by mouth to an unconscious person.
|
||||
Have the product container or label with you when calling a poison control center or doctor, or going for
|
||||
treatment. FOR A MEDICAL EMERGENCY INVOLVING THIS PRODUCT CALL: 1-866-944-8565.
|
||||
treatment. You may also contact Rocky Mountain Poison and Drug Safety at 1-866-944-8565 for emergency
|
||||
medical treatment information.
|
||||
[See] [inside] [label] [booklet] [side] [panel] [for] [First Aid][,] [additional] [Precautionary Statements][,] [and]
|
||||
[Directions for Use] [including Storage and Disposal] [instructions][.]
|
||||
For Chemical Emergency:
|
||||
Spill, Leak, Fire, Exposure, or Accident,
|
||||
Call CHEMTREC Day or Night
|
||||
Within USA and Canada: 1-800-424-9300 or +1 703-527-3887 (collect calls accepted)
|
||||
|
||||
EPA REGeg. NOo. 34704-1085
|
||||
EPA Est. No. XXXX-XX-XXX
|
||||
NET CONTENTS ____GALS. (___L)
|
||||
For Medical Emergencies or for Chemical Spill, Leak, Fire, or
|
||||
Exposure, Call CHEMTREC at 1-800-424-9300.
|
||||
EPA REG. NO. 34704-1085
|
||||
[PRINT CODE TO BE PLACED HERE]
|
||||
|
||||
EPA EST. NO. [XXXX-XX-XXX] [BAR CODE] NET CONTENTS: ____GALS. (___L)
|
||||
EPA EST. NO. [XXXX-XX-XXX] [BAR CODE] NET CONTENTS: ____GAL (___L)
|
||||
[LOT NO. _____________]
|
||||
FORMULATED FOR
|
||||
Loveland Products, Inc.® P.O. Box 1286 Greeley, [CO][Colorado] 80632-1286
|
||||
|
||||
|
||||
MANUFACTURED FOR:
|
||||
Loveland Products, Inc.
|
||||
® P.O. Box 1286 Greeley, [CO][Colorado] 80632-1286 [USA]
|
||||
[IRRD V2 0924]
|
||||
METALAXYL GROUP 4 FUNGICIDE
|
||||
FLUDIOXONIL GROUP 12 FUNGICIDE
|
||||
[PEEL FILM HERE→]
|
||||
Jun 30, 2026
|
||||
34704-1085
|
||||
10/3/2023
|
||||
|
||||
Page 2
|
||||
[Page 2]
|
||||
|
||||
PRECAUTIONARY STATEMENTS
|
||||
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
|
||||
CAUTION/PRECAUCION
|
||||
CAUTION/PRECAUCIÓN
|
||||
Harmful if swallowed. Wash thoroughly with soap and water after handling and before eating, drinking, chewing
|
||||
gum, using tobacco or using the toilet.
|
||||
PERSONAL PROTECTIVE EQUIPMENT (PPE)
|
||||
Applicators and other handlers must wear:
|
||||
• Long-sleeved shirt and long pants
|
||||
• Shoes plus socks
|
||||
x Long-sleeved shirt and long pants
|
||||
x Shoes plus socks
|
||||
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use
|
||||
detergent and hot water. Keep and wash PPE separately from other laundry.
|
||||
Engineering Controls Statement
|
||||
When handlers use closed systems in a manner that meets the requirements listed in the Worker Protection
|
||||
Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4 -6)], the handler PPE requirements may be
|
||||
Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-6)], the handler PPE requirements may be
|
||||
reduced or modified as specified in the WPS.
|
||||
USER SAFETY RECOMMENDATIONS
|
||||
Users Should:
|
||||
• Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet.
|
||||
• Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
|
||||
• Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As
|
||||
x Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet.
|
||||
x Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
|
||||
x Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As
|
||||
soon as possible, wash thoroughly and change clothing.
|
||||
ENVIRONMENTAL HAZARDS
|
||||
This product is toxic to fish and aquatic invertebrates. For terrestrial use, DO NOT apply directly to water, to areas
|
||||
@@ -157,143 +147,111 @@ DO NOT apply this product in a way that will contact workers or other persons, e
|
||||
protected handlers may be in the area during application. For any requirements specific to your State or Tribe,
|
||||
consult the agency responsible for pesticide regulation.
|
||||
|
||||
{NOTE TO REVIEWER: [One of the following statements will be used on the final printed labeling. Loveland
|
||||
Products, Inc. reserves the option to choose the statement that will be used].}
|
||||
[{STATEMENT 1:} [Use the entire contents of Dyna -Shield FM in this container in the use season immediately
|
||||
{NOTE TO REVIEWER: One of the following statements will be used on the final printed labeling. Loveland
|
||||
Products, Inc. reserves the option to choose the statement that will be used.}
|
||||
{STATEMENT 1:} [Use the entire contents of Dyna-Shield FM in this container in the use season immediately
|
||||
following purchase from Loveland Products, Inc. Store at temperatures above 40° F but below 80° F.]
|
||||
{[STATEMENT 2:} [The Dyna-Shield FM in this container has been ma nufactured for use in this use season. Use
|
||||
the entire contents of Dyna -Shield FM in this container in the use season immediately following purchase from
|
||||
{STATEMENT 2:} [The Dyna-Shield FM in this container has been manufactured for use in this use season. Use
|
||||
the entire contents of Dyna-Shield FM in this container in the use season immediately following purchase from
|
||||
Loveland Products, Inc. Store at temperatures above 40° F but below 80° F. Remaining product is non-returnable.]
|
||||
|
||||
Page 3
|
||||
[Page 3]
|
||||
|
||||
AGRICULTURAL USE REQUIREMENTS
|
||||
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170.
|
||||
This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and
|
||||
greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination,
|
||||
notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the
|
||||
statements on this label about personal protective equipment (PPE) and restricted -entry interval. The
|
||||
statements on this label about personal protective equipment (PPE) and restricted-entry interval. The
|
||||
requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard.
|
||||
DO NOT enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 48 hours.
|
||||
Exception: If the seed is treated with the product and the treated seed is soil -injected or soil -incorporated, the
|
||||
Worker Protection Standard, under certain circumstances, allows workers to enter t he treated area if there will
|
||||
DO NOT enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 48 hours.
|
||||
Exception: If the seed is treated with the product and the treated seed is soil-injected or soil -incorporated, the
|
||||
Worker Protection Standard, under certain circumstances, allows workers to enter the treated area if there will
|
||||
be no contact with anything that has been treated. PPE required for early entry to treated areas that is permitted
|
||||
under the Worker Protection Standard and that involves contact with anything that has been treated, such as
|
||||
plants, soil, or water, is:
|
||||
• Coveralls
|
||||
• Shoes plus socks
|
||||
|
||||
x Coveralls
|
||||
x Shoes plus socks
|
||||
x Chemical resistant gloves made of any waterproof material
|
||||
PRODUCT INFORMATION
|
||||
Dyna-Shield® FM DYNA-SHIELD® FM is a seed treatment fungicide for use on soybeans, legumes, rice, and cotton
|
||||
to protect against damping -off and seed rots due to Pythium, Phytophthora, Fusarium, Rhizoctonia spp., and
|
||||
Phytophthora root rot. Dyna-Shield FM DYNA-SHIELD FM also suppresses seed-borne Sclerotinia and Phomopsis
|
||||
spp. particularly in soybeans.
|
||||
Dyna-Shield® FM is a seed treatment fungicide for use on soybeans, legumes, rice, and cotton to protect against
|
||||
damping-off and seed rots due to Pythium, Phytophthora, Fusarium, Rhizoctonia spp., and Phytophthora root rot.
|
||||
Dyna-Shield FM also suppresses seed-borne Sclerotinia and Phomopsis spp. particularly in soybeans.
|
||||
Mix thoroughly before use or use entire container at one time.
|
||||
Dyna-Shield FM DYNA-SHIELD FM contains an EPA approved dye/colorant that imparts an unnatural color to the
|
||||
seed.
|
||||
Dyna-Shield FM DYNA-SHIELD FM is formulated for on-farm or commercial seed treatment.
|
||||
Resistance Management Recommendations: Dyna-Shield FM contains metalaxyl, a Group 4 f ungicide, and
|
||||
fludioxonil, a Group 12 fungicide. Metalaxyl belongs to the phenylamide class of chemistry which interferes with
|
||||
fungal RNA synthesis. Fludioxonil belongs to the phenylpyrrole class of chemistry which interferes with osmotic
|
||||
signal transduction.
|
||||
Fungal populations may contain individuals naturally resistant to Group 4 and 12 fungicides and if used repeatedly
|
||||
in the same fields, then resistant members may eventually dominate the population. Because resistance
|
||||
development cannot be predicted, the us e of this product should conform to sound resistance management
|
||||
strategies such as an alternation with fungicides of a different mode of action and/or tank mixes established for the
|
||||
crop and use area.
|
||||
Use should be based on an IPM program that includes fi eld sanitation, scouting, historical information related to
|
||||
pesticide use, and crop rotation. The IPM program should also consider cultural, biological, and other chemical
|
||||
control practices.
|
||||
Loveland Products, Inc. encourages responsible product stewardsh ip to ensure effective long term control of the
|
||||
fungal diseases on this label.
|
||||
For additional information on Fungicide Resistance Management:
|
||||
• Contact Loveland Products, Inc. representatives at 1-888-[LPI-CUST] [[(]574-2878[)]]1-888-574-2878
|
||||
• Contact your local extension specialist or certified crop advisor.
|
||||
• Visit the Fungicide Resistance Action Committee (FRAC) at http://www.frac.info
|
||||
Dyna-Shield FM contains an EPA approved dye/colorant that imparts an unnatural color to the seed.
|
||||
Dyna-Shield FM is formulated for on-farm or commercial seed treatment.
|
||||
Planter Box Treatment: Apply at the specified rate and premix with the seed directly in the planter box at planting.
|
||||
Place half the amount of seed into the planter box and apply half the required amount of pesticide to the seed. Stir
|
||||
the seed thoroughly with a paddle until the s eed is uniformly coated. Place the remaining half of the seed into the
|
||||
the seed thoroughly with a paddle until the seed is uniformly coated. Place the remaining half of the seed into the
|
||||
planter box and add the remaining half of the pesticide. Again, stir the seed with the paddle until all seed is
|
||||
thoroughly coated.
|
||||
|
||||
Page 4
|
||||
|
||||
thoroughly coated.
|
||||
Tank Mixing: All tank mixes should be pre-tested to determine physical compatibility between formulations. When
|
||||
tank mixing, follow the most restrictive label instructions for any tank mix partner. DO NOT tank mix with any product
|
||||
that bears a label prohibition against tank mixing. It is the pesticide user’s responsibility to ensure that all products
|
||||
are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for
|
||||
use on all product labels involved in tank mixing. Users must follow the most restrictive direc tions for use and
|
||||
use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and
|
||||
precautionary statements of each product in the tank mixture.
|
||||
|
||||
MIXING INSTRUCTIONS FOR SOYBEANS
|
||||
Dyna-Shield FM DYNA-SHIELD FM may be used with liquid rhizobia products that are resistant to fungicides; using
|
||||
standard mechanical slurry or mist-type seed treatment equipment which accurately measures and mixes a flowable
|
||||
seed treatment. The equipment must provide uniform coverage of Dyna-Shield FMDYNA-SHIELD FM on the seed.
|
||||
Uneven seed coverage may not give the desired level of disease control. Dyna-Shield FM DYNA-SHIELD FM must
|
||||
be diluted with either water or liquid inoculants prior to application to soybeans. Consult the manufacturer of the
|
||||
application equipment you plan to use for suitability for this ap plication and for instructions on operation and
|
||||
calibration of the equipment.
|
||||
In a clean container large enough to contain the entire mixture add the desired amount of Dyna-Shield FMDYNA-
|
||||
SHIELD FM. Add half of the required water or liquid inoculant and mi x thoroughly. Add the remaining amount of
|
||||
water or liquid inoculant and mix again. The slurry is ready for application to the soybeans. Mix as needed and do
|
||||
not store diluted mixture.
|
||||
Additional or continuous agitation or mixing of the slurry mixture may b e necessary to prevent the DDyna-Shield
|
||||
FMYNA-SHIELD FM from settling out of solution when using water or liquid inoculants. Dyna-Shield FM DYNA-
|
||||
SHIELD FM has been found to be compatible with some liquid inoculant products. Dyna-Shield FM DYNA-SHIELD
|
||||
FM may be mixed or applied sequentially with approved liquid inoculants. Consult the maker of the liquid inoculants
|
||||
and a Loveland Products, Inc.LOVELAND PRODUCTS, INC. representative for directions before applying Dyna-
|
||||
Shield FM DYNA-SHIELD FM with liquid inoculants.
|
||||
Precaution: Dyna-Shield FM DYNA-SHIELD FM is specially formulated to be compatible with some liquid
|
||||
inoculants. If water is used to further dilute Dyna-Shield FM DYNA-SHIELD FM when rhizobia are present, use only
|
||||
nonchlorinated water. Chlorinated water will kill the live rhizobia contained in the inoculant.
|
||||
Dyna-Shield FM may be used with liquid rhizobia products that are resistant to fungicides; using standard
|
||||
mechanical slurry or mist-type seed treatment equipment which accurately measures and mixes a flowable seed
|
||||
treatment. The equipment must provide uniform coverage of Dyna-Shield FM on the seed. Uneven seed coverage
|
||||
may not give the desired level of disease control. Dyna-Shield FM must be diluted with either water or liquid
|
||||
inoculants prior to application to soybeans. Consult the manufacturer of the application equipment you plan to use
|
||||
for suitability for this application and for instructions on operation and calibration of the equipment.
|
||||
In a clean container large enough to contain the entire mixture add the desired amount of Dyna-Shield FM. Add half
|
||||
of the required water or liquid inoculant and mix thoroughly. Add the remaining amount of water or liquid inoculant
|
||||
and mix again. The slurry is ready for application to the soybeans. Mix as needed and do not store diluted mixture.
|
||||
Additional or continuous agitation or mixing of the slurry mixture may be necessary to prevent the Dyna-Shield FM
|
||||
from settling out of solution when using water or liquid inoculants. Dyna-Shield FM has been found to be compatible
|
||||
with some liquid inoculant products. Dyna-Shield FM may be mixed or applied sequentially with approved liquid
|
||||
|
||||
[Page 4]
|
||||
|
||||
inoculants. Consult the maker of the liquid inoculants and a Loveland Products, Inc. representative for directions
|
||||
before applying Dyna-Shield FM with liquid inoculants.
|
||||
Precaution: Dyna-Shield FM is specially formulated to be compatible with some liquid inoculants. If water is used
|
||||
to further dilute Dyna-Shield FM when rhizobia are present, use only nonchlorinated water. Chlorinated water will
|
||||
kill the live rhizobia contained in the inoculant.
|
||||
MIXING INSTRUCTIONS FOR SEED AND POD VEGETABLES, RICE, AND COTTON
|
||||
Apply Dyna-Shield FM DYNA-SHIELD FM as a water based slurry utilizing standard slurry seed treatment
|
||||
equipment which provides uniform seed coverage. Uneven or incomplete seed coverage may not give the desired
|
||||
level of disease protection. Thoroughly mix the labeled amount of Dyna-Shield FM DYNA-SHIELD FM into the
|
||||
required amount of water for the slurry treater and dilution rate to be used.
|
||||
Apply Dyna-Shield FM as a water based slurry utilizing standard slurry seed treatment equipment which provides
|
||||
uniform seed coverage. Uneven or incomplete seed coverage may not give the desired level of disease protection.
|
||||
Thoroughly mix the labeled amount of Dyna-Shield FM into the required amount of water for the slurry treater and
|
||||
dilution rate to be used.
|
||||
Follow the manufacturer application instructions for the seed treatment equipment being used. Maintain constant
|
||||
agitation of the slurry during the treatment. Allow seed to dry before bagging.
|
||||
|
||||
RESTRICTIONS:
|
||||
DO NOT use treated seed for feed, food, or oil.
|
||||
x DO NOT use treated seed for feed, food, or oil.
|
||||
USE SPECIFICATIONS
|
||||
SOYBEANS
|
||||
DISEASE USE RATE (based on 3,000 seeds / lb)
|
||||
DISEASE USE RATE (based on 3,000 seeds/lb)
|
||||
Protection against damping-off and
|
||||
seed rots caused by Pythium,
|
||||
Phytophthora, Fusarium, Rhizoctonia
|
||||
spp., and Phytophthora root rot.
|
||||
fl .oz. /
|
||||
100 lb. of
|
||||
seed**
|
||||
fl .oz. /
|
||||
1,000 seed
|
||||
fl .oz. /
|
||||
140,000 seed
|
||||
mg AI /
|
||||
seed
|
||||
1.5 0.005 0.7 0.0037 (fludioxonil)
|
||||
0.0237 (metalaxyl)
|
||||
|
||||
Page 5
|
||||
|
||||
Suppresses seed-borne Sclerotinia
|
||||
and Phomopsis spp.
|
||||
**Contains 15.6 g of metalaxyl and 2.5 g of fludioxonil / 100 kg of
|
||||
seed.
|
||||
Apply Dyna-Shield FM DYNA-SHIELD FM at the rate specified in the rate table, plus water at 3.5 fl. oz. per 100
|
||||
lbs seed to obtain adequate coverage . Alternatively, approved liquid rhizobia inoculants at rates specified by
|
||||
manufacturer to achieve proper total slurry volumes can be used.
|
||||
fl oz/100 lb of
|
||||
seed**
|
||||
fl oz/1,000
|
||||
seed
|
||||
fl oz /140,000
|
||||
seed
|
||||
mg AI/seed
|
||||
1.5 0.005 0.7 0.0037 (fludioxonil)
|
||||
0.0237 (metalaxyl)
|
||||
**Contains 15.6 g of metalaxyl and 2.5 g of fludioxonil /100 kg of seed.
|
||||
Apply Dyna-Shield FM at the rate specified in the rate table, plus water at 3.5 fl oz per 100 lbs seed to obtain
|
||||
adequate coverage. Alternatively, approved liquid rhizobia inoculants at rates specified by manufacturer to
|
||||
achieve proper total slurry volumes can be used.
|
||||
The addition of an application of another approved metalaxyl or mefenoxam containing seed treatment product
|
||||
may be used if targeting fields with high Phytophthora pressure. Users must follow the most restrictive directions
|
||||
for use and precautionary statements of each product in the tank mixture.
|
||||
|
||||
|
||||
SEED AND POD VEG ETABLES: Black-Eyed Peas, Chickpeas, Garbanzos, Cowpeas, Field
|
||||
Beans, Field Peas, Garbanzos, Garden Peas, Green Beans, Kidney Beans, Lentils, Lima Beans,
|
||||
Lupines, Navy Beans, Okra, Peas, Pole Beans, Snap Beans, String Beans, and Wax Beans, and
|
||||
Lentils
|
||||
DISEASE USE RATE (fl .oz. / cwt. seed)
|
||||
SEED AND POD VEGETABLES: Black-Eyed Peas, Chickpeas, Cowpeas, Field Beans, Field
|
||||
Peas, Garbanzos, Garden Peas, Green Beans, Kidney Beans, Lentils, Lima Beans, Lupines, Navy
|
||||
Beans, Okra, Peas, Pole Beans, Snap Beans, String Beans, and Wax Beans
|
||||
DISEASE USE RATE (fl oz/cwt seed)
|
||||
Protection against damping-off and seed rots
|
||||
caused by Pythium, Phytophthora, Fusarium,
|
||||
Rhizoctonia spp., and Phytophthora root rot.
|
||||
@@ -303,74 +261,77 @@ Phomopsis spp.
|
||||
|
||||
|
||||
RICE
|
||||
DISEASE USE RATE (based on 21,000 seeds / lb)
|
||||
DISEASE USE RATE (based on 21,000 seeds/lb)
|
||||
Protection against early season soil and seed-
|
||||
borne fungi which cause decay, damping off, and
|
||||
fl oz/100 lb of seed** m
|
||||
g AI/seed
|
||||
1.5 0.00053 (fludioxonil)
|
||||
0.00338 (metalaxyl)
|
||||
|
||||
[Page 5]
|
||||
|
||||
seedling blights including Pythium, Rhizoctonia,
|
||||
Fusarium.
|
||||
fl .oz. / 100 lb. of seed** mg AI / seed
|
||||
1.5 0.00053 (fludioxonil)
|
||||
0.00338 (metalaxyl)
|
||||
3.0 0.00106 (fludioxonil)
|
||||
0.00677 (metalaxyl)
|
||||
**Dyna-Shield FM DYNA-SHIELD FM contains 0.74 grams fludioxonil and 4.72 grams metalaxyl per fl .oz.
|
||||
**Dyna-Shield FM contains 0.74 grams fludioxonil and 4.72 grams metalaxyl per fl oz.
|
||||
RESTRICTIONS
|
||||
Not registered for use on rRice in California
|
||||
Not registered for use on rice in California
|
||||
DO NOT use treated seed for feed, food, or oil.
|
||||
Forage must not be grazed until 30 days after planting.
|
||||
Bags or containers of Dyna-Shield FMDYNA-SHIELD FM treated rice must be labeled with the restriction: “DO
|
||||
NOT use metalaxyl or mefenoxam to control Pythium in water-seeded rice.”.
|
||||
Bags or containers of Dyna-Shield FM treated rice must be labeled with the restriction: “DO NOT use metalaxyl
|
||||
or mefenoxam to control Pythium in water-seeded rice.”
|
||||
|
||||
|
||||
COTTON
|
||||
DISEASE USE RATE (fl .oz. / 100 lb. of seed)
|
||||
DISEASE USE RATE (fl oz/100 lb of seed)
|
||||
Protection against seed and soil borne fungi such
|
||||
as Pythium, Rhizoctonia, and Fusarium that cause
|
||||
decay, damping-off, and seedling blights.
|
||||
1.5 to 3.0
|
||||
For protection against black rot, use Dyna-Shield FMDYNA-SHIELD FM in combination with SPERASpera™
|
||||
240 FS (myclobutanil) or other seed treatment fungicide containing myclobutanil that is labeled for use on
|
||||
cotton seed.
|
||||
For protection against black rot, use Dyna-Shield FM in combination with Spera™ 240 FS (myclobutanil) or
|
||||
other seed treatment fungicide containing myclobutanil that is labeled for use on cotton seed.
|
||||
RESTRICTIONS
|
||||
DO NOT use treated seed for feed, food, or oil.
|
||||
SEED BAG LABELING REQUIREMENTS
|
||||
|
||||
Page 6
|
||||
|
||||
SEED BAG LABELING REQUIREMENTS
|
||||
Seed commercially treated with this product must be labeled in accordance with all applicable
|
||||
requirements of the Federal Seed Act. The user of this product is responsible for ensuring that the seed
|
||||
bag meets all requirements under the Federal Seed Act.
|
||||
THE FEDERAL SEED ACT FEDERAL LAW REQUIRES THAT BAGS OF TREATED SEEDS SHALL BE LABELED
|
||||
WITH THE FOLLOWING INFORMATION:
|
||||
• This seed has been treated with (metalaxyl and fludioxonil) seed treatment.
|
||||
• DO NOT use for food feed, or oil purposes. Store away from feeds and other foodstu ffs.
|
||||
x This seed has been treated with (metalaxyl and fludioxonil) seed treatment.
|
||||
x DO NOT use for food feed, or oil purposes. Store away from feeds and other foodstuffs.
|
||||
|
||||
U.S. ENVIRONMENTAL PROTECTION AGENCY REQUIRES THAT BAGS OF TREATED RICE SHALL BE
|
||||
LABELED WITH THE FOLLOWING INFORMATION:
|
||||
• “Forage must not be grazed until 30 days after planting”
|
||||
x “ Forage must not be grazed until 30 days after planting”
|
||||
|
||||
THE U.S. ENVIRONMENTAL PROTECTION AGENCY REQUIRES THE FOLLOWING STATEM ENTS ON
|
||||
THE U.S. ENVIRONMENTAL PROTECTION AGENCY REQUIRES THE FOLLOWING STATEMENTS ON
|
||||
CONTAINERS CONTAINING TREATED SEED:
|
||||
• Store treated seed away from food and feedstuffs.
|
||||
• Wear long pants, long-sleeved shirt, and protective gloves when handling treated seed.
|
||||
• Cover or collect treated seeds spilled during loading and planting.
|
||||
• Treated seed exposed on soil surface may be hazardous to wildlife.
|
||||
• Dispose of all excess treated seed by burying seed away from bodies of water. DO NOT contaminate bodies
|
||||
x Store treated seed away from food and feedstuffs.
|
||||
x Wear long pants, long-sleeved shirt, and protective gloves when handling treated seed.
|
||||
x Cover or collect treated seeds spilled during loading and planting.
|
||||
x Treated seed exposed on soil surface may be hazardous to wildlife.
|
||||
x Dispose of all excess treated seed by burying seed away from bodies of water. DO NOT contaminate bodies
|
||||
of water when disposing of planting equipment wash water.
|
||||
• DO NOT contaminate water bodies when disposing of planting equipment wash water.
|
||||
• DO NOT allow children, pets, or livestock to have access to treated seed.
|
||||
• DO NOT graze or feed livestock on treated areas for 30 days after planting.
|
||||
• Excess treated seed may be used for ethanol production only if (1) by -products are not used for livestock
|
||||
x DO NOT contaminate water bodies when disposing of planting equipment wash water.
|
||||
x DO NOT allow children, pets, or livestock to have access to treated seed.
|
||||
x DO NOT graze or feed livestock on treated areas for 30 days after planting.
|
||||
x Excess treated seed may be used for ethanol production only if (1) by-products are not used for livestock
|
||||
feed and (2) no measurable residues remain in the ethanol by-products that are used in agronomic practice.
|
||||
• Groundwater Advisory: Metalaxyl is known to leach through soil into groundwater under certain conditions
|
||||
x Groundwater Advisory: Metalaxyl is known to leach through soil into groundwater under certain conditions
|
||||
as a result of agricultural use. Use of the chemical where soils are permeable, particularly where the water
|
||||
table is shallow, may result in groundwater contamination.
|
||||
• After the seeds have been planted, do not enter or allow work er entry into treated areas during the
|
||||
restricted-entry interval (REI) of 48 hours . Exception: If the treated seed is soil -injected or soil -
|
||||
x After the seeds have been planted, do not enter or allow worker entry into treated areas during the
|
||||
restricted-entry interval (REI) of 48 hours . Exception: If the treated seed is soil-injected or soil-
|
||||
|
||||
[Page 6]
|
||||
|
||||
incorporated, the Worker Protection Standard, under certain circumstances, allows workers to enter the
|
||||
treated area if there will be no contact with anything that has been treated. PPE required for early entry to
|
||||
treated areas that is permitted under the Worker Protection Standard and that involves contact with anything
|
||||
that has been treated, such as plants, soil or wa ter is: coveralls, chemical -resistant gloves made of any
|
||||
that has been treated, such as plants, soil or water is: coveralls, chemical-resistant gloves made of any
|
||||
waterproof material, and chemical-resistant footwear.
|
||||
|
||||
STORAGE AND DISPOSAL
|
||||
@@ -385,20 +346,17 @@ approved waste disposal facility.
|
||||
CONTAINER HANDLING: Nonrefillable container. Do not reuse this container to hold materials other than
|
||||
pesticides or dilute pesticides (rinsate). After emptying and cleaning, it may be allowable to temporarily hold
|
||||
rinsate or other pesticide-related materials in the container. Contact your state regulatory agency to determine
|
||||
allowable practices in your state. Once cleaned, some agricultural plastic pesticide containers ca n be taken to a
|
||||
allowable practices in your state. Once cleaned, some agricultural plastic pesticide containers can be taken to a
|
||||
container collection site or picked up for recycling. To find the nearest site, contact your chemical dealer or
|
||||
manufacturer, or contact The Agricultural Container Recycling Council (ACRC) at www.acrecycle.org . If not
|
||||
manufacturer, or contact The Agricultural Container Recycling Council (ACRC) at www.agrecycling.org. If not
|
||||
recycled, then puncture and dispose of in a sanitary landfill, or incineration, or if allowed by state and local
|
||||
authorities, by burning. If burned, stay out of smoke. Triple rinse or pressure rinse container (or equivalent)
|
||||
promptly after emptying.
|
||||
|
||||
Page 7
|
||||
|
||||
promptly after emptying.
|
||||
For packages up to 5 gallons: Triple rinse as follows: Empty the remaining contents into application
|
||||
equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container ¼ full with
|
||||
water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate
|
||||
for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more
|
||||
times. Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank an d
|
||||
times. Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and
|
||||
continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application
|
||||
equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of
|
||||
the container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to
|
||||
@@ -414,7 +372,7 @@ seconds after the flow begins to drip. Hold container upside down over applicati
|
||||
collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse
|
||||
at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to drip.
|
||||
For packages greater than 56 gallons: To clean the container before final disposal, empty the remaining
|
||||
contents from this container into application equipment or mix tank. Fill the container about 10 p ercent full with
|
||||
contents from this container into application equipment or mix tank. Fill the container about 10 percent full with
|
||||
water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application
|
||||
equipment or rinsate collection system. Repeat this rinsing procedure two more times.
|
||||
For refillable containers: Refill this container with pesticide only. Do not reuse this container for any other
|
||||
@@ -422,8 +380,12 @@ purpose. Cleaning the container before final disposal is the responsibility of t
|
||||
container.
|
||||
Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal, empty
|
||||
the remaining contents from this container into application equipment or mix tank. Fill the container about 10
|
||||
percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes . Pour or pump
|
||||
rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times.
|
||||
percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump
|
||||
rinsate into application equipment or rinsate collection s
|
||||
ystem. Repeat this rinsing procedure two more times.
|
||||
|
||||
[Page 7]
|
||||
|
||||
Offer for recycling or reconditioning, if available, or puncture and dispose of in a sanitary landfill, or by other
|
||||
procedures approved by state and local authorities.
|
||||
For help with any spill, leak, fire or exposure involving this material, call day or night CHEMTREC – 1-
|
||||
@@ -436,21 +398,19 @@ Conditions of Sale and Limitation of Warranty and Liability, which no employee o
|
||||
PRODUCTS, INC. or the seller is authorized to vary in any way.
|
||||
|
||||
Follow the Directions for Use of this product carefully. It is impossible to eliminate all risks inherently associated
|
||||
with the use of this product. Cro p or other plant injury, ineffectiveness, or other unintended consequences may
|
||||
with the use of this product. Crop or other plant injury, ineffectiveness, or other unintended consequences may
|
||||
result from such risks as weather or crop conditions, mixture with other chemicals not specifically identified in this
|
||||
product’s label, or use of this product contrary to the la bel instructions, all of which are beyond the control of
|
||||
product’s label, or use of this product contrary to the label instructions, all of which are beyond the control of
|
||||
LOVELAND PRODUCTS, INC. and the seller. To the extent consistent with applicable law the buyer or user of this
|
||||
product assumes all such inherent risks.
|
||||
|
||||
Subject to the foregoing inherent risks, LOVEL AND PRODUCTS, INC. warrants that this product conforms to the
|
||||
Subject to the foregoing inherent risks, LOVELAND PRODUCTS, INC. warrants that this product conforms to the
|
||||
chemical description on the label and is reasonably fit for the purposes stated in the Directions for Use when the
|
||||
product is used in strict accordance with such Directions for Use under normal conditions of use. EXCEPT AS
|
||||
WARRANTED IN THIS LABEL AND TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THIS PRODUCT
|
||||
IS SOLD “AS IS,” AND LOVELAND PRODUCTS, INC. MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED,
|
||||
INCLUDING BUT NOT LIMITED TO MERCHANTABILITY, FITN ESS FOR A PARTICULAR PURPOSE, OR
|
||||
ELIGIBILITY OF THIS PRODUCT FOR ANY PARTICULAR TRADE USAGE.
|
||||
|
||||
Page 8
|
||||
INCLUDING BUT NOT LIMITED TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
|
||||
ELIGIBILITY OF THIS PRODUCT FOR ANY PARTICULAR TRADE USAGE.
|
||||
|
||||
IN THE UNLIKELY EVENT THAT BUYER OR USER BELIEVES THAT LOVELAND PRODUCTS, INC. HAS
|
||||
BREACHED A WARRANTY CONTAINED IN THIS LABEL AND TO THE EXTENT REQUIRED BY APPLICABLE
|
||||
@@ -461,25 +421,24 @@ TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE BUYER’S OR USER’S EXCLUSIV
|
||||
FOR ANY INJURY, LOSS, OR DAMAGE RESULTING FROM THE HANDLING OR USE OF THIS PRODUCT,
|
||||
INCLUDING BUT NOT LIMITED TO CLAIMS OF BREACH OF WARRANTY OR CONTRACT, NEGLIGENCE,
|
||||
STRICT LIABILITY, OR OTHER TORTS, SHALL BE LIMITED TO ONE OF THE FOLLOWING, AT THE ELECTION
|
||||
OF LOVELAND PRODUCTS, INC. OR THE SELLER: DIRECT DAMAGES NOT EXCEEDING THE PURCH ASE
|
||||
OF LOVELAND PRODUCTS, INC. OR THE SELLER: DIRECT DAMAGES NOT EXCEEDING THE PURCHASE
|
||||
PRICE OF THE PRODUCT OR REPLACEMENT OF THE PRODUCT. TO THE EXTENT CONSISTENT WITH
|
||||
APPLICABLE LAW, LOVELAND PRODUCTS, INC. AND THE SELLER SHALL NOT BE LIABLE TO THE BUYER
|
||||
OR USER OF THIS PRODUCT FOR ANY CONSEQUENTIAL, SPECIAL, OR INDIRECT DAMAGES, OR
|
||||
DAMAGES IN THE NATURE OF A PENALTY.
|
||||
|
||||
|
||||
Dyna-Shield is and LOVELAND PRODUCTS, INC. are registered trademarks of Loveland Products, Inc.
|
||||
Dyna-Shield and LOVELAND PRODUCTS, INC. are registered trademarks of Loveland Products, Inc.
|
||||
Spera is a trademark of Nufarm Americas Inc.
|
||||
|
||||
FORMULATED FOR:
|
||||
LOVELAND PRODUCTS, INC.
|
||||
P.O.BOX 1286
|
||||
GREELEY, CO 80632
|
||||
|
||||
|
||||
{OPTIONAL GRAPHICS}
|
||||
{Note to Reviewer: Any of the below graphics may appear anywhere on the label. Further, any of the below
|
||||
graphics may appear in various colors or black/white; not to impact legibility.}
|
||||
|
||||
[ ]
|
||||
[]
|
||||
|
||||
[Page 8]
|
||||
|
||||
[ ]
|
||||
[]
|
||||
|
||||
Reference in New Issue
Block a user