docker: production image + Gitea Actions for monthly refresh
Image rebuild (skip scrape) / build (push) Failing after 1h37m12s
Image rebuild (skip scrape) / build (push) Failing after 1h37m12s
Dockerfile: self-contained image with corpus + Chroma + BM25 baked in. Drawbar's compose pulls + runs without volume mounts. Built from sources.json (labels schema), PRODUCT_NAME=crop_chem by default, HYBRID_SEARCH=true (always-on for production quality). RERANK_URL + OLLAMA_URL get set at compose time. .gitea/workflows/refresh.yml: monthly cron (1st @ 06:00 UTC) does full scrape → reindex → image push. Scrapes Bayer (~30 min) + EPA PPLS row-crop filtered (~7h). Skips reindex+push if no corpus diff. Tags pushed: :latest, :<sha12>, :corpus-<YYYY.MM.DD>. .gitea/workflows/image-only.yml: on-demand or auto on code-only pushes to main (paths: docs_mcp/, rag/, scrape/, requirements.txt, Dockerfile, sources.json). Reindexes from committed corpus, builds image, pushes. ~10 min vs ~9h full refresh. .gitignore: corpus/ now COMMITTED (4,159 labels, 265 MB of .md + sidecars). Lets image-only.yml rebuild indexes without re-scraping. chroma/ + bm25/ still gitignored (regenerable binary indexes). .dockerignore: drops venv, eval results, PLAN/README/CLAUDE.md, deploy/, .git/ — keeps the image lean. corpus + chroma + bm25 explicitly NOT in dockerignore (those go INTO the image). Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
This commit is contained in:
@@ -0,0 +1,792 @@
|
||||
# CENTRIC 40WG
|
||||
|
||||
- EPA Reg No: **100-1147**
|
||||
- Registrant: SYNGENTA CROP PROTECTION, LLC
|
||||
- Signal word: Caution
|
||||
- Active ingredients: Thiamethoxam (40%)
|
||||
- Label accepted: 2013-12-17
|
||||
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000100-01147-20131217.pdf
|
||||
|
||||
---
|
||||
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY
|
||||
WASHINGTON, D.C. 20460
|
||||
OFFICE OF
|
||||
CHEMICAL SAFETY AND
|
||||
POLLUTION PREVENTION
|
||||
DEC 1 7 2013
|
||||
Mr. Charles T. Levy
|
||||
Syngenta Crop Protection, LLC
|
||||
P.O. Box 18300
|
||||
Greensboro, NC 27419
|
||||
Subject: Amended label to add pollinator protection language
|
||||
Product Name: Centric® 40WG
|
||||
EPA Reg. No. 100-1147
|
||||
EPA Decision No. 484071
|
||||
Submission dated September 25, 2013; resubmission dated December 9, 2013
|
||||
Dear Mr. Levy:
|
||||
The labeling referred to above, submitted in connection with registration under the Federal
|
||||
Insecticide, Fungicide, and Rodenticide Act is acceptable. A stamped copy of your labeling is
|
||||
enclosed for your records. This labeling supersedes all previously accepted labeling. You must
|
||||
submit one (1) copy of the final printed labeling before you release the product for shipment with
|
||||
the new labeling. See 40 CFR 156.10(a)(6).
|
||||
Under 40 CFR 152.130(d), EPA may establish dates by which all product distributed or sold
|
||||
by the registrant must bear revised labeling. The following paragraphs set forth the schedule for
|
||||
ensuring that that your product bears revised labeling within a reasonable time period:
|
||||
• Any product released for shipment after 2/28/14 must bear the new label.
|
||||
If these conditions are not complied with, EPA will take appropriate action against this
|
||||
registration. If you have any questions please contact Julie Chao at 703-308-8735 or
|
||||
chao.iulieffiepa.gov.
|
||||
1 Regarc
|
||||
Venus Eagle, Product Manager (01)
|
||||
Insecticide-Rodenticide Branch
|
||||
Registration Division (7505P)
|
||||
|
||||
(Master label)
|
||||
Centric® 40WG
|
||||
Insecticide
|
||||
For control of listed insect pests infesting cotton, soybeans and tree nuts.
|
||||
GROUP gEl INSECTICIDE
|
||||
Active Ingredient:
|
||||
Thiamethoxam1 40.0%
|
||||
Other Ingredients: 60.0%
|
||||
Total: 100.0%
|
||||
1CAS No. 153719-23-4
|
||||
Centric 40WG is a water-dispersible granule.
|
||||
KEEP OUT OF REACH OF CHILDREN.
|
||||
CAUTION
|
||||
See additional precautionary statements and directions for use in booklet.
|
||||
EPA Reg. 100-1147
|
||||
EPA Est XXXX
|
||||
Product of XXXX
|
||||
Formulated in the USA
|
||||
SCP 1147-MAS 0609 AMEND SEPT2013
|
||||
Net Weight
|
||||
ACCEPTED
|
||||
DEC 1 7 2013
|
||||
Under the Federal Insecticide, Fungicide,
|
||||
and Rodenticide Act, as amended, for the
|
||||
pesticide registered under:
|
||||
EPA. Reg. Mn: 100-
|
||||
|
||||
-2-
|
||||
FIRST AID
|
||||
If on skin or
|
||||
clothing
|
||||
If swallowed
|
||||
If in eyes
|
||||
If inhaled
|
||||
• Take off contaminated clothing.
|
||||
• Rinse skin immediately with plenty of water for 15-20 minutes.
|
||||
• Call a poison control center or doctor for treatment advice.
|
||||
• Call a poison control center or doctor immediately for treatment
|
||||
advice.
|
||||
• Have a person sip a glass of water if able to swallow.
|
||||
• Do not induce vomiting unless told to do so by a poison control
|
||||
center or doctor.
|
||||
• Do not give anything by mouth to an unconscious person.
|
||||
• Hold eye open and rinse slowly and gently with water for 15-20
|
||||
minutes. Remove contact lenses, if present, after the first 5
|
||||
minutes, then continue rinsing eye.
|
||||
• Call a poison control center or doctor for treatment advice
|
||||
• Move person to fresh air.
|
||||
• If person is not breathing, call 91 1 or an ambulance, then give
|
||||
artificial respiration, preferably mouth-to-mouth, if possible.
|
||||
• Call a poison control center or doctor for treatment advice
|
||||
Have the product container or label with you when calling a poison control center or
|
||||
doctor, or going for treatment.
|
||||
NOTE TO PHYSICIAN
|
||||
There is no specific antidote if Centric 40WG is ingested. Induce emesis or lavage
|
||||
stomach. Treat symptomatically.
|
||||
HOT LINE NUMBER
|
||||
For 24 Hour Medical Emergency Assistance (Human or Animal) or
|
||||
Chemical Emergency Assistance (Spill, Leak, Fire, or Accident)
|
||||
Call
|
||||
1-800-888-8372
|
||||
PRECAUTIONARY STATEMENTS
|
||||
Hazards to Humans and Domestic Animals
|
||||
CAUTION
|
||||
Harmful if absorbed through skin, swallowed or inhaled. Causes moderate eye irritation.
|
||||
Avoid contact with skin, eyes, or clothing. Avoid breathing vapor or spray mist. Wash
|
||||
thoroughly with soap and water after handling and before eating, drinking, chewing gum,
|
||||
or using tobacco. Remove contaminated clothing and wash before reuse.
|
||||
|
||||
-3-
|
||||
Personal Protective Equipment
|
||||
Applicators and other handlers must wear:
|
||||
• Long-sleeved shirt and long pants
|
||||
• Chemical-resistant gloves - Category A (e.g., natural rubber >14 mils)
|
||||
• Shoes plus socks
|
||||
• Protective eyewear
|
||||
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions
|
||||
exist for washables, use detergent and hot water. Keep and wash PPE separately from
|
||||
other laundry.
|
||||
Engineering Control Statements
|
||||
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets
|
||||
the requirements listed in the Worker Protection Standard (WPS) for agricultural
|
||||
pesticides [40 CFR 170.240(d)(4-6)], the handler PPE requirements may be reduced or
|
||||
modified as specified in the WPS.
|
||||
User Safety Recommendations
|
||||
Users should:
|
||||
• Wash hands before eating, drinking, chewing gum, using tobacco, or using the
|
||||
toilet.
|
||||
• Remove clothing immediately if pesticide gets inside. Then wash thoroughly and
|
||||
put on clean clothing.
|
||||
Environmental Hazards
|
||||
This pesticide is toxic to wildlife and highly toxic to aquatic invertebrates.
|
||||
This pesticide is highly toxic to bees exposed to direct treatment on blooming
|
||||
crops/plants or weeds. Do not apply this product or allow it to drift to blooming
|
||||
crops/plants or weeds while bees are foraging in or adjacent to the treatment area.
|
||||
Do not apply directly to water, or to areas where surface water is present, or to intertidal
|
||||
areas below the mean high water mark. Drift or runoff from treated areas may be
|
||||
hazardous to aquatic organisms in neighboring areas. Do not contaminate water when
|
||||
cleaning equipment or disposing of equipment washwater.
|
||||
|
||||
-4-
|
||||
• Surface Water Advisory
|
||||
This product may impact surface water quality due to spray drift and runoff of rain
|
||||
water. This is especially true for poorly draining soils and soils with shallow ground
|
||||
water. This product is classified as having high potential for reaching surface water
|
||||
via runoff for several months after application. A level, well-maintained vegetative
|
||||
buffer strip between areas to which this product is applied and surface water features
|
||||
such as ponds, streams, and springs will reduce the potential loading of
|
||||
thiamethoxam water from runoff water and sediment. Runoff of this product will be
|
||||
reduced by avoiding applications when rainfall is forecast to occur within 48 hours.
|
||||
(See manual at the following Internet address:
|
||||
http://www.wsi.nrcs.usda.gov/productsAA/2Q/pest/core4.html)
|
||||
Ground Water Advisory
|
||||
Thiamethoxam has properties and characteristics associated with chemicals
|
||||
detected in ground water. The use of this chemical in areas where soils are
|
||||
permeable, particularly where the water table is shallow, may result in ground
|
||||
water contamination.
|
||||
Spray Drift Advisory
|
||||
Do not allow this product to drift.
|
||||
|
||||
-5-
|
||||
PROTECTION OF POLLINATORS
|
||||
ITRBCTDOMS EXIST FOR
|
||||
THIS PRODUCT BECAUSE OF RISK TO BEES AND OTHER INSECT
|
||||
POLLINATORS. FOLLOW APPLICATION RESTRICTIONS FOUND IN THE
|
||||
DIRECTIONS FOR USE TO PROTECT POLLINATORS.
|
||||
Look for the bee hazard icon XX in the Directions for Use for each
|
||||
application site for specific use restrictions and instructions to protect bees and
|
||||
other insect pollinators.
|
||||
This product can kill bees and otfaeir insect poiSomiators.
|
||||
Bees and other insect pollinators will forage on plants when they flower, shed pollen, or
|
||||
produce nectar.
|
||||
Bees and other insect pollinators can be exposed to this pesticide from:
|
||||
o Direct contact during foliar applications, or contact with residues on plant surfaces after
|
||||
foliar applications
|
||||
o Ingestion of residues in nectar and pollen when the pesticide is applied as a seed treatment,
|
||||
soil, tree injection, as well as foliar applications.
|
||||
When Using This Product Take Steps To:
|
||||
o Minimize exposure of this product to bees and other insect pollinators when they are
|
||||
foraging on pollinator attractive plants around the application site.
|
||||
o Minimize drift of this product on to beehives or to off-site pollinator attractive habitat. Drift
|
||||
of this product onto beehives or off-site to pollinator attractive habitat can result in bee kills.
|
||||
Information on protecting bees and other insect pollinators may be found at the Pesticide
|
||||
Environmental Stewardship website at:
|
||||
http://pesticidestewardship.org/PollinatorProtection/Pages/default.aspx.
|
||||
Pesticide incidents (for example, bee kills) should immediately be reported to the state/tribal lead agency. For
|
||||
contact information for your state, go to: www.aapco.org/officials.html. Pesticide incidents should also be
|
||||
reported to the National Pesticide Information Center at: www.npic.orst.edu or directly to EPA at:
|
||||
beekill@epa.gov
|
||||
|
||||
-6-
|
||||
Physical or Chemical Hazards
|
||||
Do not use, pour, spill or store near heat or open flame.
|
||||
|
||||
//-7-
|
||||
CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY
|
||||
NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation of
|
||||
Warranty and Liability before buying or using this product. If the terms are not
|
||||
acceptable, return the product at once, unopened, and the purchase price will be
|
||||
refunded.
|
||||
The Directions for Use of this product must be followed carefully. It is impossible to eliminate all
|
||||
risks inherently associated with the use of this product. Crop injury, ineffectiveness or other
|
||||
unintended consequences may result because of such factors as manner of use or application,
|
||||
weather or crop conditions, presence of other materials or other influencing factors in the use of
|
||||
the product, which are beyond the control of SYNGENTA CROP PROTECTION, LLC or Seller.
|
||||
To the extent permitted by applicable law, Buyer and User agree to hold SYNGENTA and Seller
|
||||
harmless for any:claims relating to such factors.
|
||||
SYNGENTA warrants that this product conforms to the chemical description on the label
|
||||
and is reasonably fit for the purposes stated in the Directions for Use, subject to the
|
||||
inherent risks referred to above, when used in accordance with directions under normal
|
||||
use conditions. To the extent permitted by applicable law: (1) this warranty does not
|
||||
extend to the use of the product contrary to label instructions, or under conditions not
|
||||
reasonably foreseeable to or beyond the control of Seller or SYNGENTA, and (2) Buyer
|
||||
and User assume the risk of any such use. TO THE EXTENT PERMITTED BY
|
||||
APPLICABLE LAW, SYNGENTA MAKES NO WARRANTIES OF MERCHANTABILITY
|
||||
OR OF FITNESS FOR A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR
|
||||
IMPLIED WARRANTY EXCEPT AS WARRANTED BY THIS LABEL.
|
||||
To the extent permitted by applicable law, in no event shall SYNGENTA be liable for any
|
||||
incidental, consequential or special damages resulting from the use or handling of this
|
||||
product. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THE EXCLUSIVE
|
||||
REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY OF
|
||||
SYNGENTA AND SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR
|
||||
DAMAGES (INCLUDING CLAIMS BASED ON BREACH OF WARRANTY,
|
||||
CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE)
|
||||
RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SHALL BE THE
|
||||
RETURN OF THE PURCHASE PRICE OF THE PRODUCT OR, AT THE ELECTION
|
||||
OF SYNGENTA OR SELLER, THE REPLACEMENT OF THE PRODUCT.
|
||||
SYNGENTA and Seller offer this product, and Buyer and User accept it, subject to the
|
||||
foregoing Conditions of Sale and Limitation of Warranty and Liability, which may not be
|
||||
modified except by written agreement signed by a duly authorized representative of
|
||||
SYNGENTA.
|
||||
|
||||
-8-
|
||||
DIRECTIONS FOR USE
|
||||
It is a violation of Federal law to use this product in a manner inconsistent with its
|
||||
labeling.
|
||||
See individual crops for specific pollinator protection application restrictions. If
|
||||
none exist under the specific crop, for foliar applications, follow these application
|
||||
directions for crops that are contracted to have pollinator services or for food/feed
|
||||
crops & commercially grown ornamentals that are attractive to pollinators:
|
||||
°lf*\
|
||||
FOR CROPS UNDER CONTRACTED POLLINATION
|
||||
SERVICES
|
||||
Do not apply this product while bees are foraging. Do not
|
||||
apply this product until flowering is complete and all
|
||||
petals have fallen unless the following condition has been
|
||||
met:
|
||||
If an application must be made when managed bees
|
||||
are at the treatment site, the beekeeper providing the
|
||||
pollination services must be notified no less than 48-
|
||||
hours prior to the time of the planned application so
|
||||
that the bees can be removed, covered or otherwise
|
||||
protected prior to spraying.
|
||||
FOR FOOD/FEED CROPS AND COMMERCIALLY GROWN
|
||||
ORNAMENTALS NOT UNDER CONTRACT FOR
|
||||
POLLINATION SERVICES BUT ARE ATTRACTIVE TO
|
||||
POLLINATORS
|
||||
Do not apply this product while bees are foraging. Do
|
||||
not apply this product until flowering is complete and all
|
||||
petals have fallen unless one of the following conditions
|
||||
is met:
|
||||
The application is made to the target site after
|
||||
sunset
|
||||
The application is made to the target site when
|
||||
temperatures are below 55°F
|
||||
The application is made in accordance with a
|
||||
government-initiated public health response
|
||||
The application is made in accordance with an
|
||||
|
||||
lot
|
||||
-9-
|
||||
active state-administered apiary registry program
|
||||
where beekeepers are notified no less than 48-
|
||||
hours prior to the time of the planned application so
|
||||
that the bees can be removed, covered or otherwise
|
||||
protected prior to spraying '
|
||||
The application is made due to an imminent threat
|
||||
of significant crop loss, and a documented
|
||||
determination consistent with an IPM plan or
|
||||
predetermined economic threshold is met. Every
|
||||
effort should be made to notify beekeepers no less
|
||||
than 48-hours prior to the time of the planned
|
||||
application so that the bees can be removed,
|
||||
covered or otherwise protected prior to spraying.
|
||||
Do not apply this product in a way that will contact workers or other persons, either
|
||||
directly or through drift. Only protected handlers may be in the area during application.
|
||||
For any requirements specific to your State or Tribe, consult the agency responsible for
|
||||
pesticide regulation.
|
||||
Centric 40WG is a selective insecticide and its use is compatible with integrated pest
|
||||
management programs. However, Centric 40WG is toxic to bees exposed to direct
|
||||
treatment or to residue on blooming crops/plants and weeds. Do not apply Centric
|
||||
40WG or allow it to drift onto blooming plants if bees are foraging in the treated area.
|
||||
Do not use Centric 40WG in nurseries, greenhouses, plant propagation houses, or on
|
||||
any plants grown for use as transplants.
|
||||
AGRICULTURAL USE REQUIREMENTS
|
||||
Use this product only in accordance with its labeling and with the Worker Protection
|
||||
Standard, 40 CFR Part 170. This Standard contains requirements for the protection of
|
||||
agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of
|
||||
agricultural pesticides. It contains requirements for training, decontamination,
|
||||
notification, and emergency assistance. It also contains specific instructions and
|
||||
exceptions pertaining to the statements on this label about personal protective
|
||||
equipment (PPE) and restricted-entry interval. The requirements in this box only apply
|
||||
to uses of this product that are covered by the Worker Protection Standard.
|
||||
Do not enter or allow worker entry into treated areas during the restricted-entry
|
||||
interval (REI) of 12 hours.
|
||||
PPE required for early entry to treated areas that is permitted under the Worker
|
||||
Protection Standard and that involves contact with anything that has been treated, such
|
||||
as plants, soil, or water is:
|
||||
• Coveralls
|
||||
|
||||
P1-10-
|
||||
Chemical-resistant gloves - Category A (e.g., natural rubber >14 mils)
|
||||
Shoes plus socks
|
||||
Protective eyewear
|
||||
FAILURE TO FOLLOW DIRECTIONS AND PRECAUTIONS ON THIS LABEL MAY
|
||||
RESULT IN CROP INJURY, POOR INSECT CONTROL, AND/OR ILLEGAL
|
||||
RESIDUES.
|
||||
Centric 40WG controls many sucking and chewing insects through contact and ingestion
|
||||
on cotton, tree nuts and soybeans.
|
||||
For best performance, always follow these directions:
|
||||
• Centric 40WG should be applied when insect pest populations begin to build, but
|
||||
before populations reach economically damaging levels. Economic thresholds for
|
||||
pests controlled by Centric 40WG may be available from your local agricultural
|
||||
authorities.
|
||||
• Centric 40WG is rapidly taken up into foliage after application. However, thorough
|
||||
spray coverage is essential for optimal performance. Apply Centric 40WG in
|
||||
sufficient water to ensure good coverage. See specific application information in the
|
||||
Crop Use Directions section of this label. The use of higher water volumes will
|
||||
generally result in better coverage, especially under adverse conditions (e.g. hot,
|
||||
dry) or where a dense plant canopy exists. The use of a spray adjuvant may
|
||||
improve spray coverage but is not required.
|
||||
• Centric 40WG is rainfast once the spray solution has dried on treated plants.
|
||||
• Centric 40WG has a wide margin of plant safety when used in accordance with this
|
||||
label.
|
||||
Resistance Management
|
||||
Centric 40WG belongs to the neonicotinoid class of chemistry (Group 4A Insecticide).
|
||||
Pests which are resistant to insecticides in other chemical classes are not known to be
|
||||
cross-resistant to Centric 40WG. However, insect pests are known to develop
|
||||
resistance to products used repeatedly. Because resistance development cannot be
|
||||
predicted, the use of this product should conform to sound resistance management
|
||||
strategies established for the crop and use area.
|
||||
APPLICATION PROCEDURES AND SPRAY EQUIPMENT
|
||||
Ground Application
|
||||
|
||||
-11-
|
||||
Spray nozzles should be selected which will provide accurate and uniform spray
|
||||
deposition. Use spray nozzles that provide medium-sized droplets and reduce drift. To
|
||||
help insure accuracy, calibrate sprayer before each use. For information on spray
|
||||
equipment and calibration, consult nozzle manufacturers and / or State Extension
|
||||
Service specialists.
|
||||
Apply Centric 40WG using sufficient water volume to provide thorough and uniform
|
||||
coverage. In situations where a dense canopy exists and/or pest pressure is high, use
|
||||
greater water volumes. The use of a spray adjuvant may increase spray coverage but is
|
||||
not required. Avoid making applications under conditions where uniform coverage
|
||||
cannot be obtained or where excessive spray drift may occur.
|
||||
Precautions: (1) Use spray volumes of 3-10 gal./A. For optimum coverage and
|
||||
efficacy, a spray volume of 5 gals or greater per acre is recommended. (2) Select
|
||||
nozzles which produce the desired droplet sizes at the normal rated pressure range. (3)
|
||||
When spraying fine-sized droplets, carefully check a//_nozzles for flow and calibrate the
|
||||
sprayer. (4) The sprayer should travel at a uniform speed across the field. (5) Monitor
|
||||
environmental conditions and follow Recommendations to Avoid Spray Drift carefully.
|
||||
Aerial Application
|
||||
Apply Centric 40WG in water, using a minimum spray volume of 3 gals. /A. Increase
|
||||
spray volume where practical to improve coverage. Avoid making application under
|
||||
conditions where uniform coverage cannot be obtained or where excessive spray drift
|
||||
may occur.
|
||||
Recommendations to Avoid Spray Drift
|
||||
As with all crop protection products, it is important to avoid off-target movement. Do not
|
||||
allow spray to drift onto adjacent land, crops or aquatic areas. Follow these
|
||||
recommendations to avoid spray drift:
|
||||
• Make applications when wind velocity favors on-target product deposition
|
||||
(Approximately 3-10 mph). Do not apply when wind velocity exceeds 10mph.
|
||||
Avoid applications when wind gusts approach 10mph.
|
||||
• Risk of exposure to sensitive aquatic areas can be reduced by avoiding applications
|
||||
when wind direction is toward the aquatic area.
|
||||
• Do not cultivate or plant crops within 25 ft. of the aquatic area as to allow growth of a
|
||||
vegetative filter strip.
|
||||
• Do not make aerial applications during temperature inversions. Inversions are
|
||||
characterized by stable air and increasing temperatures with increased height above
|
||||
the ground. Mist or fog may indicate the presence of an inversion in humid areas.
|
||||
The applicator may detect the presence of an inversion by producing smoke and
|
||||
observing a smoke layer near the ground surface.
|
||||
• Use the largest droplet size consistent with good pest control. Small droplets are
|
||||
more prone to spray drift, and can be minimized by appropriate nozzle selection, by
|
||||
orienting nozzles away from the air stream as much as possible, and by avoiding
|
||||
excessive spray boom pressure.
|
||||
|
||||
13
|
||||
-12-
|
||||
Apply as close to target plants as practical to obtain a good spray pattern for
|
||||
adequate coverage. Applications more than 10 ft. above the crop canopy should be
|
||||
avoided.
|
||||
For aerial applications, the spray boom should be mounted on the aircraft so as to
|
||||
minimize drift caused by wing tip vortices. The minimum practical boom length
|
||||
should be used and must not exceed 75% of wing span or rotor diameter.
|
||||
|
||||
-13-
|
||||
MIXING PROCEDURES
|
||||
Prepare no more spray mixture than is needed for the immediate operation. Thoroughly
|
||||
clean spray equipment before using this product. Vigorous agitation is necessary for
|
||||
proper dispersal of the product. Maintain maximum agitation throughout the spraying
|
||||
operation. Do not let the spray mixture stand overnight in the spray tank. Flush the
|
||||
spray equipment thoroughly following each use and apply the rinsate to a previously
|
||||
treated area. Keep product container tightly closed when not in use.
|
||||
Centric 40WG Alone
|
||||
Add 1/2 of the required amount of water to the mix tank. With the agitator running, add
|
||||
the desired amount of Centric 40WG to the tank. Continue agitation while adding the
|
||||
remainder of the water. Begin application of the solution after Centric 40WG has
|
||||
completely dispersed into the mix water. Maintain agitation until all of the mixture has
|
||||
been applied.
|
||||
Centric 40WG + Tank Mixtures
|
||||
Add 1/2 of the required amount of water to the mix tank. Start the agitator running
|
||||
before adding any tank mix partners. In general, tank mix partners should be added in
|
||||
this order: products packaged in water-soluble packaging, wettable powders, wettable
|
||||
granules (dry flowables) such as Centric 40WG, liquid flowables, liquids, emulsifiable
|
||||
concentrates and surfactants / adjuvants. Always allow each tank mix partner to
|
||||
become fully dispersed before adding the next product. Provide sufficient agitation while
|
||||
adding the remainder of the water. Maintain agitation until all the mixture has been
|
||||
applied.
|
||||
Note: When using Centric 40WG in tank mixtures, all products in water-soluble
|
||||
packaging should be added to the tank before any other tank mix partner, including
|
||||
Centric 40WG. Allow the water-soluble packaging to completely dissolve and the
|
||||
product(s) to completely disperse before adding any other tank mix partner to the tank.
|
||||
If using Centric 40WG in a tank mixture, observe all directions for use, crop/sites, use
|
||||
rates, dilution ratios, precautions, and limitations that appear on the tank mix product
|
||||
label. Do not exceed any label dosage rate, and follow the most restrictive label
|
||||
precautions and limitations. Do not mix Centric 40WG with any product that prohibits
|
||||
such mixing. Tank mixtures or other applications of products referenced on this label
|
||||
are permitted only in those states in which the referenced products are labeled.
|
||||
Compatibility
|
||||
Centric 40WG is compatible with most commonly used pesticides, crop oils, adjuvants,
|
||||
and nutritional sprays. However, since it is not possible to test all possible mixtures, the
|
||||
user should pre-test to assure the physical compatibility and lack of phytotoxic effect of
|
||||
any proposed mixtures with Centric 40WG. To determine the physical compatibility of
|
||||
Centric 40WG with other products, use a jar test, as described below.
|
||||
Using a quart jar, add the proportionate amounts of the products to 1 qt. of water. Add
|
||||
wettable powders and water-dispersible granular products first, then liquid flowables,
|
||||
and emulsifiable concentrates last. After thoroughly mixing, let stand for at least 5
|
||||
|
||||
-14-
|
||||
minutes. If the combination remains mixed or can be remixed readily, it is physically
|
||||
compatible. Once compatibility has been proven, use the same procedure for adding
|
||||
required ingredients to the spray tank.
|
||||
The crop safety of all potential tank mixes on all crops has not been tested. Before
|
||||
applying any tank mixture not specified on this label, the safety to the target crop should
|
||||
be confirmed.
|
||||
|
||||
-15-
|
||||
CROP USE DIRECTIONS
|
||||
Crop Pest Rate Per Acre
|
||||
Per Application
|
||||
Use Restrictions
|
||||
Cotton Aphids 1.25-2.5 oz./A Aphids: For best results, the low
|
||||
rate should not be used after first
|
||||
bloom or on rapidly increasing
|
||||
populations.
|
||||
Clouded plant bug
|
||||
Cotton fleahopper
|
||||
Tarnished plant bug
|
||||
(Lygus lineolaris)
|
||||
1.25-2.5 oz./A Clouded plant bug, Cotton
|
||||
fleahopper, and Tarnished plant
|
||||
bug: Control may require the use of
|
||||
two applications made at a 5 - 10
|
||||
day interval.
|
||||
Brown stink bug
|
||||
(suppression only)
|
||||
Green stink bug
|
||||
Lygus bug
|
||||
(Lygus Hesperus)
|
||||
(suppression only)
|
||||
Southern green stink
|
||||
bug
|
||||
Thrips
|
||||
Whiteflies
|
||||
2.0 - 2.5 oz./A
|
||||
Stink bugs, Thrips, and
|
||||
Whiteflies: Control may require the
|
||||
use of two applications made at a 5
|
||||
-10 day interval.
|
||||
Use Restrictions:
|
||||
• Maximum Centric 40WG Allowed per Growing Season: Do not exceed a total
|
||||
of 5.0 oz. of Centric 40WG (0.125 Ibs. a.i.) /A during the growing season.
|
||||
• Application Timing: Apply before pests reach damaging levels. Scout fields
|
||||
and treat again if populations rebuild to potentially damaging levels. Apply higher
|
||||
rates within the specified rate range for heavy infestations. Do not apply this
|
||||
product within 45 days of planting if cottonseeds were treated with a
|
||||
neonicotinoid product.
|
||||
• Pre-Harvest Interval (PHI): 21 Days.
|
||||
• Minimum Interval Between Applications: Allow at least 5 days between
|
||||
applications.
|
||||
• Water Volume: Use sufficient water volume to ensure thorough coverage of
|
||||
foliage. Do not use less than 10 GPA for ground applications and 3 GPA for
|
||||
aerial applications.
|
||||
|
||||
-16-
|
||||
Crop
|
||||
Soybean
|
||||
Pest
|
||||
Aphids
|
||||
Brown stink bug
|
||||
(suppression only)
|
||||
Green stink bug
|
||||
Red banded stink bug
|
||||
Southern green stink bug
|
||||
Rate Per Acre
|
||||
Per Application
|
||||
1.5-2.00Z./A
|
||||
2.0 - 2.5 oz./A
|
||||
Use Restrictions
|
||||
Stink Bugs: Control
|
||||
may require the use
|
||||
of two applications
|
||||
made at a 7 to 1 0
|
||||
day interval.
|
||||
Use Restrictions:
|
||||
• Maximum Centric 40WG Allowed per Growing Season: Do not exceed a total
|
||||
of 5.0 oz. of Centric 40WG (0.125 Ib. a.i.) per acre during the growing season.
|
||||
• Application Timing: Apply before pests reach damaging levels. Scout fields
|
||||
and treat again if populations rebuild to potentially damaging levels. Apply higher
|
||||
rates within the specified rate range for heavy infestations.
|
||||
• Pre-Harvest Interval (PHI): 21 Days
|
||||
• Maximum Centric 40WG Allowed per Growing Season: Do not exceed a total
|
||||
of 5.0 oz. of Centric 40WG (0.125 Ib. a.i.) per acre during the growing season.
|
||||
• Minimum Interval Between Applications: Allow at least 7 days between
|
||||
applications.
|
||||
• Water Volume: Use sufficient water volume to ensure thorough coverage of
|
||||
foliage. Do not use less than 10 GPA for ground applications or 3 GPA for aerial
|
||||
applications.
|
||||
• Do Not allow livestock to graze in treated areas or harvest treated soybean
|
||||
forage, straw or hay as feed for meat or dairy animals. Do not feed treated
|
||||
soybean fodder or silage to meat or dairy animals.
|
||||
|
||||
-17-
|
||||
Crop
|
||||
TREE NUTS
|
||||
(including pistachio)
|
||||
Almond
|
||||
Beech Nut
|
||||
Brazil Nut
|
||||
Butternut
|
||||
Cashew
|
||||
Chestnut
|
||||
Chinquapin
|
||||
Filbert (Hazlenut)
|
||||
Hickory Nut
|
||||
Macadamia Nut (Bush
|
||||
Nut)
|
||||
Pecan
|
||||
Pistachio
|
||||
Walnut, Black
|
||||
Walnut, English
|
||||
(Persian)
|
||||
Pest
|
||||
Blackmargined aphid
|
||||
Lygus Bug
|
||||
(Lygus Hesperus)
|
||||
(suppression only)
|
||||
Pecan phylloxera
|
||||
Red Shoulder Stink
|
||||
Bug
|
||||
Walnut aphid
|
||||
Yellow pecan aphid
|
||||
Black pecan aphid
|
||||
Rate per Acre
|
||||
per
|
||||
Application
|
||||
2.0 - 2.5 oz./A
|
||||
2.5 oz./A
|
||||
Remarks
|
||||
Pecan phylloxera:
|
||||
Apply treatment
|
||||
after egg hatch,
|
||||
before nymphs are
|
||||
in galls. This
|
||||
usually occurs after
|
||||
bud break when 1-
|
||||
2 inches of new
|
||||
growth is present.
|
||||
Use Restrictions:
|
||||
• Maximum Centric 40WG Allowed per Growing Season: Do not exceed a total
|
||||
of 5.0 oz. of Centric 40WG (0.125 Ib. a.i.) /A of Centric 40WG or 0.125 Ib. a.i. of
|
||||
thiamethoxam-containing products per acre per growing season.
|
||||
• Application Timing: Apply before pests reach damaging levels. Scout fields
|
||||
and treat again if populations rebuild to potentially damaging levels.
|
||||
• Pre-Harvest Interval (PHI): 14 days
|
||||
• Minimum Interval between Applications: Allow at least 7 days between
|
||||
applications.
|
||||
• Water Volume: Use sufficient water volume to ensure thorough coverage of
|
||||
foliage. Do not use less than 50 GPA for ground application or 20 GPA for aerial
|
||||
application.
|
||||
Pollinator Precautions:
|
||||
Centric 40WG is highly toxic to bees exposed to direct treatment or residues on
|
||||
blooming crops. Do not apply during pre-bloom or during bloom when bees are
|
||||
foraging. Do not apply Centric 40WG or allow it to drift to blooming crops if bees are
|
||||
foraging in or adjacent to the treatment area. This is especially critical if there are
|
||||
adjacent orchards that are blooming. After a Centric 40WG application, wait at least
|
||||
5 days before placing beehives in the treated field. If bees are foraging in the ground
|
||||
cover and it contains any blooming plants or weeds, always remove flowers before
|
||||
making an application. This may be accomplished by mowing, disking, mulching,
|
||||
flailing, or applying a labeled herbicide. Consult with your local cooperative extension
|
||||
|
||||
-18-
|
||||
service or state agency responsible for regulating pesticide use for additional pollinator
|
||||
safety practices.
|
||||
Rotational Restrictions
|
||||
Treated areas may be replanted immediately following harvest, or as soon as practical
|
||||
following the last application, with any crop listed on this label or to barley, Brassica
|
||||
(cole) vegetables, canola, corn, cucurbit, fruiting vegetables, leafy vegetables, legume
|
||||
vegetables, mint (peppermint and spearmint), oilseed crops (black mustard seed, borage
|
||||
seed, crambe seed, field mustard seed, flax seed, Indian mustard seed, Indian
|
||||
rapeseed, rapeseed, safflower seed), root vegetables (except sugarbeet), sorghum,
|
||||
strawberry, sunflower, tobacco, tuberous and corm vegetables, and wheat. Any cover
|
||||
crop planted for erosion control or soil improvement may be planted as soon as practical
|
||||
following the last application. However, the cover crop may not be grazed or harvested
|
||||
for food or feed. For all other crops, a 120-day plant-back interval must be observed.
|
||||
STORAGE AND DISPOSAL
|
||||
Do not contaminate water, food, or feed by storage or disposal.
|
||||
Pesticide Storage
|
||||
Store in a cool dry place.
|
||||
For minor spills, leaks, etc., follow all precautions indicated on this label and clean up
|
||||
immediately. Take special care to avoid contamination of equipment and facilities during
|
||||
cleanup, procedures and disposal of wastes.
|
||||
Pesticide Disposal
|
||||
Pesticide wastes are toxic. Improper disposal of unused pesticide, spray mixture, or
|
||||
rinse water is a violation of Federal law. If these wastes cannot be used according to
|
||||
label instructions, contact your State Pesticide or Environmental Control Agency, or the
|
||||
Hazardous Waste representative at the nearest EPA Regional Office for guidance in
|
||||
proper disposal methods.
|
||||
Container Handling
|
||||
Non-refillable container. Do not reuse or refill this container. Offer for recycling if
|
||||
available. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as
|
||||
follows: Empty the remaining contents into application equipment or a mix tank. Fill the
|
||||
container % full with water and recap. Shake for 10 seconds. Pour rinsate into
|
||||
application equipment or mix tank or store rinsate for later use and disposal. Drain for
|
||||
10 seconds after the flow begins to drip. Repeat this procedure two more times. Then
|
||||
offer for recycling if available or puncture and dispose of in a sanitary landfill, or by
|
||||
incineration, or, if allowed by state and local authorities, by burning. If burned, stay out
|
||||
of smoke.
|
||||
|
||||
-19-
|
||||
Centric® 40WG, the Syngenta logo and the CP FRAME L^are trademarks of a
|
||||
Syngenta Group Company
|
||||
©200X Syngenta
|
||||
For non-emergency (e.g., current product information) call
|
||||
Syngenta Crop Protection at 1-800-334-9481.
|
||||
Manufactured for:
|
||||
Syngenta Crop Protection, LLC
|
||||
P.O. Box 18300
|
||||
Greensboro, North Carolina 27419-8300
|
||||
SCP 1147-MAS 0609 AMEND SEPT2013
|
||||
|
||||
«fyk-20-
|
||||
(Non-detachable Container Label)
|
||||
Centric® 40WG
|
||||
insecticide
|
||||
GROUP M9M INSECTICIDE
|
||||
For control of listed insect pests infesting cotton, soybeans and tree nuts.
|
||||
Active Ingredient:
|
||||
Thiamethoxam1 40.0%
|
||||
Other Ingredients: 60.0%
|
||||
Total: . 100.0%
|
||||
1CAS No. 153719-23-4
|
||||
Centric 40WG is a water-dispersible granule.
|
||||
KEEP OUT OF REACH OF CHILDREN.
|
||||
CAUTION
|
||||
See directions for use and additional precautionary statements in booklet.
|
||||
AGRICULTURAL USE REQUIREMENTS
|
||||
Use this product only in accordance with its labeling and with the Worker
|
||||
Protection Standard, 40 CFR Part 170. Refer to supplemental labeling under
|
||||
"Agricultural Use Requirements" in the Directions for Use section for information
|
||||
about this standard.
|
||||
EPA Reg. No. 100-1147
|
||||
EPA Est. XXXX
|
||||
SCP 1147-MAS 0609 AMEND SEPT2013
|
||||
Net Weight
|
||||
|
||||
x
|
||||
-21-
|
||||
FIRST AID
|
||||
If on skin or
|
||||
clothing
|
||||
If swallowed
|
||||
If in eyes
|
||||
If inhaled
|
||||
• Take off contaminated clothing.
|
||||
• Rinse skin immediately with plenty of water for 15-20 minutes.
|
||||
• Call a poison control center or doctor for treatment advice.
|
||||
• Call a poison control center or doctor immediately for treatment
|
||||
advice.
|
||||
• Have a person sip a glass of water if able to swallow.
|
||||
• Do not induce vomiting unless told to do so by a poison control
|
||||
center or doctor.
|
||||
• Do not give anything by mouth to an unconscious person.
|
||||
• Hold eye open and rinse slowly and gently with water for 15-20
|
||||
minutes. Remove contact lenses, if present, after the first 5
|
||||
minutes, then continue rinsing eye.
|
||||
• Call a poison control center or doctor for treatment advice
|
||||
• Move person to fresh air.
|
||||
• If person is not breathing, call 91 1 or an ambulance, then give
|
||||
artificial respiration, preferably mouth-to-mouth, if possible.
|
||||
• Call a poison control center or doctor for treatment advice
|
||||
Have the product container or label with you when calling a poison control center or
|
||||
doctor, or going for treatment.
|
||||
NOTE TO PHYSICIAN
|
||||
There is no specific antidote if Centric 40WG is ingested. Induce emesis or lavage
|
||||
stomach. Treat symptomatically.
|
||||
HOT LINE NUMBER
|
||||
For 24 Hour Medical Emergency Assistance (Human or Animal) or
|
||||
Chemical Emergency Assistance (Spill, Leak, Fire, or Accident),
|
||||
Call
|
||||
1-800-888-8372
|
||||
|
||||
33,
|
||||
-22-
|
||||
PRECAUTIONARY STATEMENTS
|
||||
Hazards to Humans and Domestic Animals
|
||||
CAUTION
|
||||
Harmful if absorbed through skin, swallowed or inhaled. Causes moderate eye irritation.
|
||||
Avoid contact with skin, eyes, or clothing. Avoid breathing vapor or spray mist. Wash
|
||||
thoroughly with soap and water after handling and before eating, drinking, chewing gum,
|
||||
or using tobacco. Remove contaminated clothing and wash before reuse.
|
||||
Environmental Hazards
|
||||
This pesticide is toxic to wildlife and highly toxic to aquatic invertebrates.
|
||||
This pesticide is highly toxic to bees exposed to direct treatment on blooming
|
||||
crops/plants or weeds. Do not apply this product or allow it to drift to blooming
|
||||
crops/plants or weeds while bees are foraging in or adjacent to the treatment area.
|
||||
Do not apply directly to water, or to areas where surface water is present, or to intertidal
|
||||
areas below the mean high water mark. Drift or runoff from treated areas may be
|
||||
hazardous to aquatic organisms in neighboring areas. Do not contaminate water when
|
||||
cleaning equipment or disposing of equipment washwater.
|
||||
• Surface Water Advisory
|
||||
This product may impact surface water quality due to spray drift and runoff of rain
|
||||
water. This is especially true for poorly draining soils and soils with shallow ground
|
||||
water. This product is classified as having high potential for reaching surface water
|
||||
via runoff for several months after application. A level, well-maintained vegetative
|
||||
buffer strip between areas to which this product is applied and surface water features
|
||||
such as ponds, streams, and springs will reduce the potential loading of
|
||||
thiamethoxam water from runoff water and sediment. Runoff of this product will be
|
||||
reduced by avoiding applications when rainfall is forecast to occur within 48 hours.
|
||||
(See manual at the following Internet address:
|
||||
http://www.wsi.nrcs.usda.gov/productsA/V2Q/pest/core4.html)
|
||||
• Ground Water Advisory
|
||||
Thiamethoxam has properties and characteristics associated with chemicals
|
||||
detected in ground water. The use of this chemical in areas where soils are
|
||||
permeable, particularly where the water table is shallow may result in ground
|
||||
water contamination.
|
||||
• Spray Drift Advisory
|
||||
Do not allow this product to drift.
|
||||
|
||||
-23-
|
||||
Physical or Chemical Hazards
|
||||
Do not use, pour, spill or store near heat or open flame.
|
||||
STORAGE AND DISPOSAL
|
||||
Do not contaminate water, food, or feed by storage or disposal.
|
||||
Pesticide Storage
|
||||
Store in a cool dry place.
|
||||
For minor spills, leaks, etc., follow all precautions indicated on this label and clean up
|
||||
immediately. Take special care to avoid contamination of equipment and facilities during
|
||||
cleanup, procedures and disposal of wastes.
|
||||
Pesticide Disposal
|
||||
Pesticide wastes are toxic. Improper disposal of unused pesticide, spray mixture, or
|
||||
rinse water is a violation of Federal law. If these wastes cannot be used according to
|
||||
label instructions, contact your State Pesticide or Environmental Control Agency, or the
|
||||
Hazardous Waste representative at the nearest EPA Regional Office for guidance in
|
||||
proper disposal methods.
|
||||
Container Handling
|
||||
Non-refillable container. Do not reuse or refill this container. Offer for recycling if
|
||||
available. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as
|
||||
follows: Empty the remaining contents into application equipment or a mix tank. Fill the
|
||||
container % full with water and recap. Shake for 10 seconds. Pour rinsate into
|
||||
application equipment or mix tank or store rinsate for later use and disposal. Drain for
|
||||
10 seconds after the flow begins to drip. Repeat this procedure two more times. Then
|
||||
offer for recycling if available or puncture and dispose of in a sanitary landfill, or by
|
||||
incineration, or, if allowed by state and local authorities, by burning. If burned, stay out
|
||||
of smoke.
|
||||
Centric® 40WG and the Syngenta logo are trademarks of a Syngenta Group Company
|
||||
©200X Syngenta
|
||||
Manufactured for:
|
||||
Syngenta Crop Protection, LLC
|
||||
P.O. Box 18300
|
||||
Greensboro, North Carolina 27419-8300
|
||||
SCP 1147-MAS 0609 AMEND SEPT2013
|
||||
CENTRIC 40WG 1147 MAS 0609 AMEND SEP2013 CLEAN POLL-dk-09/26/13
|
||||
000100-01147.20130912.CENTRIC-40WG_AMEND_SEP2013-CLEAN.pdf
|
||||
CENTRIC 40WG 1147 MAS 0609 AMEND SEP2013 POLL VERSION B-CLEAN-dk-11/27/13
|
||||
000100-01147.20130912.B.CENTRIC-40WG_AMEND_SEP2013-CL.pdf
|
||||
CENTRIC 40WG 1147 MAS 0609 AMEND SEP2013 POLL VERSION CLEAN-dk-12/05/13
|
||||
000100-01147.20130912.C.CENTRIC-40WG_AMEND_SEP2013-CL.pdf
|
||||
Reference in New Issue
Block a user