justin/crop-chem-docs
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

docker: production image + Gitea Actions for monthly refresh
Image rebuild (skip scrape) / build (push) Failing after 1h37m12s
Details

Browse Source 
Dockerfile: self-contained image with corpus + Chroma + BM25 baked
in. Drawbar's compose pulls + runs without volume mounts. Built from
sources.json (labels schema), PRODUCT_NAME=crop_chem by default,
HYBRID_SEARCH=true (always-on for production quality). RERANK_URL +
OLLAMA_URL get set at compose time.

.gitea/workflows/refresh.yml: monthly cron (1st @ 06:00 UTC) does
full scrape → reindex → image push. Scrapes Bayer (~30 min) +
EPA PPLS row-crop filtered (~7h). Skips reindex+push if no corpus
diff. Tags pushed: :latest, :<sha12>, :corpus-<YYYY.MM.DD>.

.gitea/workflows/image-only.yml: on-demand or auto on code-only
pushes to main (paths: docs_mcp/, rag/, scrape/, requirements.txt,
Dockerfile, sources.json). Reindexes from committed corpus, builds
image, pushes. ~10 min vs ~9h full refresh.

.gitignore: corpus/ now COMMITTED (4,159 labels, 265 MB of .md +
sidecars). Lets image-only.yml rebuild indexes without re-scraping.
chroma/ + bm25/ still gitignored (regenerable binary indexes).

.dockerignore: drops venv, eval results, PLAN/README/CLAUDE.md,
deploy/, .git/ — keeps the image lean. corpus + chroma + bm25
explicitly NOT in dockerignore (those go INTO the image).

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
This commit is contained in:
Justin Paul
2026-05-24 12:32:41 -04:00
parent 1a45280e45
commit a97107de46
8323 changed files with 5273594 additions and 133 deletions
Download Patch File Download Diff File Expand all files Collapse all files
corpus/epa_ppls/1381-101.md
+731
View File
@@ -0,0 +1,731 @@
# 2,4-D LV6
- EPA Reg No: **1381-101**
- Registrant: WINFIELD SOLUTIONS, LLC
- Signal word: Caution
- Active ingredients: 2,4-D, 2-ethylhexyl ester (88.8%)
- Label accepted: 2011-01-21
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/001381-00101-20110121.pdf
---
( (
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY
WASHINGTON, D.C. 20460
Alice Walker
Winfield Solutions LLC, c/o Alice Walker
3094 Country Club Rd.
Senatobia, MS 38668
Dear Dr. Walker:
Subject: Label Amendment
2,4-D LV 6
OFFlCEOF
PREVENTION, PESTICIDES
AND TOXIC SUBSTANCES
J/tfJ 2 f '<6[(
EPA Registration Number 1381-101
Application Submission dated October 25,2011
The amended label referred to above, submitted in connection with registration under the
Federal Insecticide, Fungicide and Rodenticide Act as amended is acceptable provided that the
following revisions are made:
1. On page 2, under the heading "Environmental Hazards" change the first sentence
from "This product may be toxic to fish and aquatic invertebrates" to read "This
product is toxic to fish and aquatic invertebrates."
2. On page 6, under the heading "Precautions for Planting Soybeans" change from "Risk
is greater if higher rates of product were applied and soil temperatures have been cold
and/or soils have been excessively wet or dry in the days following application" to
read "If product is applied at the higher limit of listed rates, and if soil temperatures
have been cold and/or soils have been excessively wet or dry in the days following
application, risk of crop injury is increased."
One copy of the label stamped "Accepted with Comments" is enclosed for your records.
Please submit one copy of the final printed supplemental label before the product is released for
shipment. If you have any questions, please contact Tracy White by phone at (703) 308-0042 or
via email at white.tracy@epa.gov.
Enclosure
Sincerely,
athryn V. Montague
Product Manager (23)
Herbicide Branch
Registration Division (7505P)
IJI3
(
AgrisoLUTION§(
~trWl~~~,,"""IIIIII"~
~113
2,4-D LV6
ACTIVE INGREDIENT:
2-ethylhexyl ester of 2,4-dichlorophenoxyacetic acid* .................................................................................................. 88.8%
OTHER INGREDIENTS: ............................................................................................................................................ 11.2%
Total. .......................................................................................................................................... 100.0%
*Isomer specific by AOAC Method No. 6.275 13th Edition, 1980.
* 2,4-Dichlorophenoxyacetic acid equivalent 59.1 %.
Contains 5.6 Ibs. of 2,4-Dichlorophenoxyacetic acid per gallon.
*Contains petroleum distillates. *
KEEP OUT OF REACH OF CHILDREN
CAUTION
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION
ACCEPTED
wit~COMMEN1C§
III. EPA Lettell" !l)aaoo~
, 'o~pJ 1 ( J:oll
( , , (
Underilie Federal 111.. (·'~i.:;ik,
FUIl'gicidey and Rod€:r"."ide f.ct
as ~mellrlr.9, for the ~i("ifIc
regis~~~,!IDder EPA Rhll· No.
r c ~
r3(~I-1 of : : (
Harmful if swallowed, inhaled or absorbed through skin. Causes moderate eye irritation. Avoid contact with skin, eyes or
clothing. Avoid breathing spray mist. Do not get in eyes, on skin or clothing. Prolonged or frequently re~eaterl skin contact
may cause allergic reaction in some individuals. " ,<
FIRST AID
IF SWALLOWED: Call a poison control center or doctor immediately for treatment advice. Do not give ANY liquid to the
person. Do not induce vomiting unless told to by a poison control center or doctor. Do not give anything by mouth to an
unconscious person.
IF IN EYES: Hold eyelids open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if
present, after the first 5 minutes, then continue rinsing. Call a poison control center or doctor for treatment advice.
IF ON SKIN: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a
poison control center or doctor for treatment advice.
IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial
respiration, preferably mouth-to-mouth if possible. Call a poison control center or doctor for further treatment advice.
NOTE TO PHYSICIAN: Contains petroleum distillate - vomiting may cause aspiration hazard.
Have the product container or label with you when calling a poison control center or doctor or going for treatment.
For additional information in case of emergency call toll free 1-877-424-7452.
Personal Protective Equipment:
Some materials that are chemical-resistant to this product are neoprene, nitrile rubber, barrier laminate, or viton. If you want
more options, follow the instructions for category E on an EPA chemical resistance category selection chart.
All mixers, loaders, applicators, flaggers, and other handlers must wear:
- Long-sleeved shirt and long pants.
- Chemical-resistant gloves when applying with any handheld nozzle or equipment, mixing or loading, cleaning up spills or
equipment, or otherwise exposed to the concentrate.
- Chemical-resistant apron when mixing or loading, cleaning up spills or equipment, or otherwise exposes to the concentrate.
- Shoes plus socks.
See engineering controls for additional requirements.
Follow manufacturer's instructions for cleaning or maintaining PPE. If no such instructions forwashables exist, use detergent
and hot water. Keep and wash PPE separately from other laundry.
EPA Reg. No. 1381-101
Distributed By
Winfield Solutions, LLC
P.O. Box 64589, St. Paul, MN 55164-0089
EPA Est. No. 70989-IA-001
NET CONTENTS
2.5 GALLONS
1/1025/0
Engineering controls statement: ( ( 2
(STATEMENT TO BE ADDED WHEN CONTAINER SIZE IS 5 GALLON OR MORE)
Do not pour product from this container. A mechanical system (pump and probe or spigot) must be used in transferring the
contents of this container. If the contents of a non-refillable pesticide container are emptied, the probe must be rinsed before
removal. If the mechanical system is used in a manner that meets the requirements listed in the Worker F)rotection Standard
(WPS) for agricultural pesticides [40 CFR 170.240 (d) (4-6)], the handler PPE requirements may be reduced or modified as
specified in the WPS.
Pilots must use an enclosed cockpit that meets the requirements listed in the Worker Protection Standard (WPS) for
agricultural pesticides [40 CFR 170.240 (d) (6)]. When handlers use closed systems, enclosed cabs, or aircraft, in a manner
that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d)
(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS.
USER SAFETY RECOMMENDATIONS
Users should:
- Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet.
- Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
- Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible,
wash thoroughly and change into clean clothing.
ENVIRONMENTAL HAZARDS
t •
This product may be toxic to fish and aquatic invertebrates. Do not apply directly to water, to areas where surface water is
present, or to intertidal areas below mean high water mark. Drift and runoff may be hazardous to aquatic invertebrates in
water adjacent to treated areas. Drift or runoff may adversely affect non-target plants. Do not contaminate water when
disposing of equipment washwaters or rinsate.
This chemical has properties and characteristics associated with chemicals detected in groundwater. The use of this
chemical in areas where soils are permeable, particularly where the water table is shallow, may result in groundwater
contamination. Application around a cistern or well may result in contamination of drinking water or groundwater.
Most cases of groundwater contamination involving phenoxy herbicides such as 2,4-0 have been associated with
mixing/loading and disposal sites. Caution should be exercised when handling 2,4-0 pesticides at such sites to prevent
contamination of groundwater supplies. Use of closed systems for mixing or transferring this pesticide will reduce the
probability of spills. Placement of mixing/loading equipment on an impervious pad to contain spills will help prevent
groundwater contamination.
Use care to avoid spray contact or drift to susceptible plants such as beans and other legumes, cotton, flowers, grapes,
ornamentals, vegetables, and other plants. Do not permit spray mist containing this product to drift onto them, since even very
small quantities of the spray, which may not be visible can cause severe injury during both growing and dormant periods.
DIRECTIONS FOR USE
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. Do not apply this product in a way
that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during
application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation.
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. This
Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses and
handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency
assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal
protective equipment (PPE) and restricted-entry interval. The requirements in this box apply only to uses of this product that
are covered by the Worker Protection Standard.
Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 12 hours.
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves
contact with anything that has been treated, such as plants, soil, or water is:
- Coveralls.
- Chemical resistant gloves made of any waterproof material.
- Shoes plus socks.
r-------,( ( ,,-----__ --"-3 __ 411 S
, , ... ON-AGRICUl TURAl USE REQUIREMEh. • S I
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection I
Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce I
agricultural plants on farms, forests, nurseries, or greenhouses.
ets to enter the treated area until s ra s have dried.
STORAGE AND DISPOSAL
Do not contaminate water, food or feed by storage and disposal.
PESTICIDE STORAGE: Store in a secure area, in original container only. Do not store near feed or foodstuffs. When stored
at temperatures below freezing, it may be necessary to warm contents to 70
0
F and mix thoroughly before using.
PESTICIDE DISPOSAL: Pesticide wastes are toxic. Improper disposal of excess pesticide, spray mixture, or rinsate is a
violation of Federal Law and may contaminate groundwater. If these wastes cannot be disposed of by use according to label
instructions, contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste representative at the
nearest EPA Regional Office for guidance.
CONTAINER DISPOSAL: Use label language appropriate for container size and type.
Nonrefillable containers. Do not reuse or refill this container. Clean container promptly after emptying.
Nonrefillable container equal to or less than 5 gallons. Triple rinse as follows: Empty the remaining contents into
application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container X full with water
and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or ,
disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Offer for recycling or :
reconditioning, or puncture and dispose of in a sanitary landfill, or by other procedures approved by state and local authorities, '
such as burning of plastic containers. If burned, stay out of smoke.
Nonrefillable container greater than 5 gallons. Triple rinse as follows: Empty the remaining contents into application
equipment or a mix tank. Fill the container % full with water. Replace and tighten closures. Tip container on its side and roll it
back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and
forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into
application equipment or a mix tank or store rinsate for later use of disposal. Repeat this procedure two more times. Offer for!
recycling or reconditioning, or puncture and dispose of in a sanitary landfill, or by other procedures approved by state and local !
authorities, such as burning of plastic containers. If burned, stay out of smoke.
Refillable container. Refill this container with pesticide only. Do not reuse this container for any other purpose. Cleaning the
container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the
responsibility of the refiller. To clean the container before final disposal, empty the remaining contents from this container into
application equipment or mix tank. Fill the container about 10 percent full with water. Agitate vigorously or recirculate water
with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing ,
procedure two more times. Offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill, or by other I
procedures approved by state and local authorities, such as burning of plastic containers. If burned, stay out of smoke. i
FOR CHEMICAL EMERGENCY: Spill, leak, fire, exposure or accident, call
CHEMTREC 1-800-424-9300.
WEED LIST
2,4-0 LV6 will control these plants and other 2,4-0 susceptible species:
ANNUAL AND BIENNIAL WEEDS
Annual fanweed (field pennycress), annual yellow sweet clover, * beggerticks, bull thistle, burdock, carpetweed, chickweed,
cocklebur, coffeeweed, common mullein, common evening primrose, cornflower, croton, galinsoga, goatsbeard, hemp,
hen bit, horseweed (marestail), jewelweed, jimsonweed • knotweed, • kochia, lambsquarters, mallow (Venice, dwarf, little),
marsh elder, morning-glory (common, ivy, wooly), musk thistle, mustards (except blue), pennycress, pepperweed (field), ••
pigweeds, poorjoe (wooly plantain), * prickly lettuce, puncturevine, purslane, ragweed (common and giant), rough fleabane,
Russian thistle, salsify, shepardspurse, stinkweed, * smartweeds (annual), sowthistle (annual or spiny), sunflower,
tansymustard, tumbleweed, velvetleaf, vetches, water primrose, • wild carrot, wild lettuce, wild parsnips, wild radish, wild
sweet potato.
PERENNIAL WEEDS
* Alfalfa, * bindweeds (hedge, field and European), blue lettuce, * broom snakeweed, buckhorn plantain, buttercup,· Canada
thistle, catnip, chamise, chicory, climbing milkweed, curly indigo, dandelion, * docks, • dogbanes, • goldenrod, * ground ivy, •
hawkweed (orange), * hoary cress, * Jerusalem artichoke, locoweed, * many-flowered aster, milkvetch, * nettles, nutgrass,
plantains, poison ivy, pokeweed, sheep sorrel, sicklepod, sneezeweed (bitter), sowthistle (perennial), * tansy ragwort, •
vervains, * wild garlic, * wild onion, witchweed, wormwood, yellow rocket, yellow starthistle.
c * BRUSH c
4
Boxelder, buckbrush, coyotebrush, elderberry, manzanita, rabbitbrush, sagebrush (coastal, big, sand), sand shinnery oak,
sumac, willow.
* These species may require repeat treatments and/or the higher specified rate. ** Control of pigweeds in the Texas and
Oklahoma High Plains may be difficult.
USE DIRECTIONS
Unless noted otherwise under individual DIRECTIONS section, for aerial application, apply the specified amount in a
minimum of 2 gallons of water per acre. For ground application, apply the specified amount in a minimum of 3 gallons of
water per acre. Use more water for both methods when adverse growing conditions are present. DO NOT apply with high
spray pressures, hollow cone or other nozzle types that produce small spray droplets which may drift. Avoid spray drift by
making applications when conditions such as wind, air stability and temperature inversions are not a factor. The use of a
suitable drift control agent at the proper rate will aid in the reduction of spray drift. Apply when weather is warm and plants are
rapidly growing. Cold weather or dry conditions may cause poor results. DO NOT apply if rain is expected within an hour.
Consult your local agronomist or Extension specialist for specific use and crop tolerance situations.
SPRAY DRIFT MANAGEMENT
A variety of factors including weather conditions (e.g., wind direction, wind speed, temperature, and relative humidity) and
method of application (e.g., ground, aerial, airblast) can influence pesticide drift. The applicator must evaluate all factors and
make appropriate adjustments when applying this product.
2,4-0 esters may volatilize during conditions of low humidity and high temperatures. Do not apply during conditions of low
humidity and high temperatures.
Droplet Size
When applying sprays that contain 2,4-0 as the sole active ingredient, or when applying sprays that contain 2,4-0 mixed with
active ingredients that require a Coarse or coarser spray, apply only as a Coarse or coarser spray (ASAE standard 572) or a
volume mean diameter of 385 microns or greater for spinning atomizer nozzles.
When applying sprays that contain 2,4-0 mixed with other active ingredients that require a Medium or more fine spray, apply
only as a Medium or coarser spray (ASAE standard 572) or a volume mean diameter of 300 microns or greater for spinning
atomizer nozzles.
Wind Speed
Do not apply at wind speeds greater than 15 mph. Only apply this product if the wind direction favors on-target deposition and
there are not sensitive areas (including, but not limited to, residential areas, bodies of water, known habitat for non-target
species, non-target crops) within 250 feet downwind. If applying a Medium spray, leave one swath unsprayed at the downwind
edge of the treated field.
Temperature Inversions
If applying at wind speeds less than 3 mph, the applicator must determine if:
a) conditions of temperature inversion exist, or
b) stable atmospheric conditions exist at or below nozzle height. Do not make applications into areas of temperature
inversions or stable atmospheric conditions.
Susceptible Plants
Do not apply under circumstances where spray drift may occur to food, forage, or other plantings that might be damaged or
crops thereof rendered unfit for sale, use or consumption. Susceptible crops include, but are not limited to, cotton, okra,
flowers, grapes (in growing stage), fruit trees (foliage), soybeans (vegetative stage), ornamentals, sunflowers, tomatoes,
beans, and other vegetables, or tobacco. Small amounts of spray drift that might not be visible may injure susceptible
broad leaf plants.
Other State and Local Requirements
Applicators must follow all state and local pesticide drift requirements regarding application of 2,4-0 herbicides. Where states
have more stringent regulations, they must be observed.
Equipment
All aerial and ground application equipment must be properly maintained and calibrated using appropriate carriers or
surrogates.
Additional requirements for aerial applications:
- 5 £ /13
The boom length must not exceed l of the wingspan or 90% of the rotor blad( 3meter. Release spray at the lowest
height consistent with efficacy and flight safety. Do not release spray at a height greater than 10 feet above the crop canopy
unless a greater height is required for aircraft safety. This requirement does not apply to forestry or rights-of-way applications.
When applications are made with a crosswind, the swath will be displaced downwind. The applicator must compensate for
this by adjusting the path of the aircraft upwind.
Additional requirements for ground boom application:
Do not apply with a nozzle height greater than 4 feet above the crop canopy.
MIXING INSTRUCTIONS
Do not apply this product through any type of irrigation system.
WATER BASED SPRAY -- Fill the equipment half full of water, agitate while adding this product; then add the rest of water.
WATER AND SOYBEAN OIL OR PETROLEUM OIL-BASED SPRAY-First mix this product with the oil; then add to water. If
vigorous agitation is possible, the oil can be added last. DO NOT ADD OIL FIRST!
SOYBEAN OIL OR PETROLEUM OIL-BASED SPRAY: Add this product to straight oil to form a solution. Do not allow water
to get into this mixture, if it does, an invert emulsion will occur.
NITROGEN FERTILIZER: Weed and feed applications for corn, small grains, grasses grown for seed or grass pastures
according to label use rates. - Add half the fertilizer to the tank, then add recommended label amount of 2,4-0 LV6 per acre.
Agitate constantly and vigorously and finish filling spray tank with fertilizer. Apply as soon as possible, agitating constantly. Do
not hold spray mixture overnight. If incompatibility is a problem, the use of COMPLETE COMPATIBllITY® agent at the
recommended label rate may correct the problem. Fertilize according to the recommendations of your supplier or your
Extension specialist. Herbicide foliage contact burning may occur as a result of fertilizer use. Lower use rates and
concentrations will reduce this problem.
Adjuvants for Preemergence and Preplant Applications: A non-ionic surfactant such as PREFERENCE® or a crop
oil concentrate may be added to the spray solution when this product is applied preemergence or preplant to increase
control of large or difficult to control weeds. Crop oil concentrates must contain at least 17% emulsifier, and should be
used at 1 % volume/volume (1 gallon per 100 gallons of spray solution). Non-ionic surfactants should be used at 0.25%
volume/volume (1 quart per 100 gallons of spray solution). When an adjuvant is to be used with this product, Winfield
Solutions, LLC recommends the use of a Chemical Producers and Distributors Association certified adjuvant.
Wash spray equipment thoroughly with PROTAN~ cleaner after using this product. When cleaning equipment, do not pour
washwater on the ground: spray or drain over a large area away from wells or other water sources. Apply the recommended
amount of 2,4-0 per acre regardless of the amount of diluent used.
CORN II -a I d" FIELD SWEET AND POP corn me u mg ,
WEEDS AMOUNT OF 2,4-0 DIRECTIONS
LV6
PER ACRE
Preplant-- Planting of corn must be delayed a minimum of 7 days after
Annual and biennial broad leaf 3/4 pint application at rates up to 1 pint per acre, and a minimum of 14 days at
seedlings rates from 1 to 1-1/2 pints per acre. Planting sooner after application
Perennial weed seedlings and 3/4 to 1-1/3 pints than specified on this label may result in unacceptable crop injury.
existing cover crops
* Do not perform tillage for at least 7 days after application. Do not use on sandy soils or unacceptable crop injury may result.
Preemergence and reduced 1-1/3 pints Apply after corn is planted but before emergence for control of
tillage.--Broadleaf weeds and emerged broad leaf weeds. The seed furrow must be completely I
annual grasses. closed at application or severe crop injury may result.
* Use higher rate on soils high in organiC matter. Do not use on sandy soils or unacceptable crop injury may result.
Postemergence - Annual 1/3 pint Apply when corn is less than 8 inches tall, but to avoid crop injury do
broad leaf weeds not apply just after leaves have unfolded. If corn is over 8 inches tall,
use drop nozzles to keep spray off of corn foliage as much as
possible. See additional restrictions below.
Perennial broad leaf weeds 2/3 pint ** Apply when weeds are in bud to bloom stage. If corn is over 8 inches'
tall, use drop nozzles to keep spray off corn foliage as much as
possible.
Sweet Corn: To minimize potential for crop injury, use only lowest
rate in rate range.
** DO NOT apply from 2 weeks before tasseling to dough stage. DO NOT apply to open whorls. To avoid injury, do not use
, ,- 6?-/ {3
rW--:-it-:-:-h-a-t-ra-z-'-in-e-,-o""":Cil-o-r-o-tC-h-e-r -a--:-dJ:-·u-v-a-nt-;s .. ~plication during high moisture and tempe .ure conditions may cause injury or
brittleness. DO NOT cultivate for a week to 10 days after treatment or stalk breakage may occur.
Late season weed control 2/3 to 1-1/3 Apply after silks are completely brown to reduce weeds that interfere
Preharvest (Field corn and pints * with harvest and reduce weed seed production. Do not apply to sweet
popcorn only) corn.
* Use lower rate for small annual and biennial weeds. Use the higher rate for perennial and larger hard-to-kill annual and
biennial weeds.
RESTRICTIONS AND LIMITATIONS FOR FIELD CORN AND POPCORN:
• Do not use treated crop as fodder for 7 days following application.
• The preharvest interval (PHI) is 7 days.
• Maximum of 4.28 pts. (3 Ibs. ae) per acre per crop cycle.
• Preplant or preemergence:
Limited to one preplant or preemergence application per crop cycle.
Maximum of 1.42 pts. (1 lb. ae) per acre per application.
• Postemergence:
Limited to one postemergence application per crop cycle.
Maximum of 0.7 pt. (1/2 lb. ae) per acre per application.
• Preharvest:
Limited to one preharvest application per crop cycle.
Maximum of 2.14 pts. (1 1/2 Ibs. ae) per acre per application.
RESTRICTIONS AND LIMITATIONS FOR SWEET CORN:
• Do not use treated crop as fodder for 7 days following application.
• The preharvest interval (PHI) is 45 days.
• Minimum of 21 days between applications.
• Maximum of 2.14 pts. (1 1/2 Ibs. ae) per acre per crop cycle.
• Preplant or preemergence:
Limited to one preplant or preemergence application per crop cycle.
Maximum of 1.42 pts. (1 lb. ae) per acre per application.
• Postemergence:
Limited to one postemergence application per crop cycle.
Maximum of 0.7 pt. (1/2 lb. ae) per acre per application.
SOYBEANS
WEEDS AMOUNT OF 2,4-0 LV 6
PER ACRE
DIRECTIONS
Pre plant - Emerged 2/3 to 1-1/3 pints After applying, plant soybean seed as deep as practical or at least 1-1/2 to 2
broadleaf weeds. inches deep. Seed furrow must be completely closed or severe crop injury
will result.
USE RESTRICTIONS AND LIMITATIONS FOR SOYBEANS: Do not perform tillage for at least 7 days after application. Do
not use on sandy soils or unacceptable crop injury may result. Do not replant treated fields in the same growing season with
crops that are not labeled for 2,4-0 preplant use.
• The maximum rate per crop cycle is 1.43 pints (1 Ibs. ae) per acre.
• Preplant:
Limited to 2 preplant applications per crop cycle.
Maximum of 0.7 pint (1/2 lb. ae) per acre per preplant application.
Apply not less than 7 days prior to planting soybeans.
OR
• Preplant:
Limited to 1 application per crop cycle.
Maximum of 1.43 pints (1 lb. ae) per preplant application.
Apply not less than 15 days prior to planting soybeans.
PRECAUTIONS FOR PLANTING SOYBEANS: Risk is greater if higher rates of product were applied and soil
J temperatures have been cold and/or soils have been excessively wet or dry in the days following application.
( ( 7 ~({3
GRAIN SORGHUM
WEEDS AMOUNT OF 2,4-D LV6 DIRECTIONS
PER ACRE
Annual broad leaf 1/2 pint Apply to plants that are 5 to 15 inches tall. DO NOT treat plants less than 5
weeds inches tall or from boot to early dough stage. Use drop nozzles when crop is 8
Perennial 2/3 pint inches or taller.
broad leaf weeds The higher rate may be needed for some weeds, but chances of crop injury may
increase.
DO NOT use oil. Some varieties and hybrids are 2,4-0 sensitive. Crop injury may also be increased by high moisture and
temperature conditions. Check with your seed company and Extension Service for advice.
RESTRICTIONS AND LIMITATIONS FOR GRAIN SORGHUM:
• The preharvest interval (PHI) is 30 days.
• Do not permit meat or dairy animals to consume treated crop as fodder or forage for 30 days following application.
• Postemergence:
Limited to 1 application per crop cycle.
Maximum of 0.7 pt. (1/2 lb. ae) per acre per application.
SMALL GRAINS -Not un d . hi erseeded Wit egumes
WEEDS AMOUNT OF 2,4-D LV 6 DIRECTIONS
PER ACRE
Postemergence - Spring 1/3 to 1-1/3 pints * Apply when grain is in full tiller stage (4 to 8 inches high) but before
wheat, barley, and rye boot stage (Zadoks 25 to 40) when weeds are small and actively
Annual and biennial weeds growing. Up to 1-1/3 pints per acre may be used to control difficult
weed problems, but do not use unless some crop damage is
acceptable.
Perennial broad leaf weeds 2/3 to 1-1/3 pints ** Apply only in the spring when crop is fully tillered, but before grain is
in boot stage (before Zadoks 40 ). For improved control of difficult
weeds, apply up to 2 pints per acre.
** DO NOT USE THE HIGHER RATE IF POSSIBLE CROP INJURY IS NOT ACCEPTABLE
Spring and winter wheat and 2,4-0 LV6 may be used in combination with "Ally" I lVI, "Harmony Extra" IIVI, "Express" 1M,
barley "Finesse" TM, at their earlier application intervals to control resistant weeds such as kochia
Resistant weeds and Russian thistle. Follow application directions on each product label.
Winter wheat and rye 1/3 to 2/3 pint** Apply only in the spring when crop is fully tillered, but before grain is
Annual weeds in boot stage (before Zadoks 40 ). For improved control of difficult
weeds, apply up to 2 pints per acre.
** DO NOT USE THE HIGHER RATE IF POSSIBLE CROP DAMAGE IS NOT ACCEPTABLE
Wild garlic or onions 1 to 1-1/3 pints * Apply 1 pint rate when grain is at full tiller and wild garlic and onion
plants are small. Apply 1-1/3 pints after the harvest to the crop
stubble. For control of new fall growth of these plants, refer to the
fallow land use directions.
Spring-seeded oats 1/3 to 1/2 pint* Apply at full tiller, but before early boot stage (Zadoks 25 to 40 ).
Fall seeded oats grown for 1/2 to 1 pint* Apply at full tiller, but before early boot stage (Zadoks 25 to 40 ).
grain (Southern) i
* Difficult to control weeds may require higher rate, but some injury may occur since oats are less tolerant to 2,4-D than I
wheat or barley. DO NOT spray during or just after cold weather.
Preharvest - Cereal grains 2/3 to 1-1/3 pints * Apply when grain is in hard dough stage (Zadoks 87 ) to control
weeds that will interfere with harvest. Apply when soil moisture is
adequate for weed growth for best results.
* Use the lower rate for small annual and biennial weeds. Use the higher rate for perennial weeds or hard-to-kill annual or
biennial weeds. The higher rate should be used only where heavy weed infestation is a problem and increased risk of crop
damage is acceptable.
RESTRICTIONS AND LIMITATIONS FOR SMALL GRAINS:
• The preharvest interval (PHI) is 14 days.
I • Postemergence:
I Limited to one postemergence application per crop cycle.
----~_:_:_---____i(.--Maximum of 1.78 pts. (1 1/4 Ibs. ___ ) per acre per application.
8 cr/IJ
----------~------~I
• Preharvest:
Limited to one preharvest application per crop cycle.
Maximum of 0.7 pt. (1/2 Ibs. ae) per acre per application.
• Limited to 2.5 pts. (1 3/4 Ibs. ae) per acre per crop cycle.
FALLOW GROUND (crop stubble on idle land, or postharvest to crops, or between crops)
WEEDS AMOUNT OF 2,4-D lV6 DIRECTIONS
PER ACRE
Annual broad leaf weeds 2/3 to 1-2/3 pints Use the lower rate on small actively growing weeds. Use the higher rate
on larger or weather stressed weeds.
Biennial weeds 1-2/3 to 2-2/3 pints Use the lower rate in the Spring on biennial weeds such as the musk
thistle during the rosette stage before stalks have formed. Use the higher
rate after stalk formation or in the Fall.
Perennial weeds 1-2/3 to 2-2/3 pints Apply during the bud to bloom stage while weeds are actively growing. Do
not till for 2 weeks after treatment or until the weeds start to die.
Wild onions and garlic 2-2/3 pints Apply to regrowth in fall after harvest.
RESTRICTIONS AND LIMITATIONS FOR FALLOW GROUND (crop stubble on idle land, or postharvest to crops, or
between crops:
• Plant only labeled crops within 29 days following application.
• Limited to 2 applications per year.
• Maximuim of 2.8 pts. (2 Ibs. ae) per acre per application.
• Minimum of 30 days between applications.
PLANTING IN TREATED AREAS:
Labeled Crops: Within 29 days after an application of this product, plant only those crops listed on this or other registered
2,4-0 labels. Follow more specific limitations, if any, provided in directions for specific crops. Labeled crops may be at risk
of crop injury or loss if planted soon after application, especially during the first 14 days. Degradation factors described
below should be considered in weighing this risk.
Other Crops: All other crops may be planted 30 or more days after application without concern for illegal residues in the
planted crop. However, under certain conditions, there may be a risk of injury to susceptible crops. Degradation factors
described below should be considered in weighing this risk. Under normal conditions, any crop may be planted without risk
of injury if at least 90 days of soil temperatures above freezing have elapsed since application.
Degradation Factors: When planting into treated areas, the risk of crop injury is less if lower rates of product were applied
and conditions following application have included warm, moist soil conditions that favor rapid breakdown of 2,4-0. Risk is
greater if higher rates of product were applied and soil temperatures have been cold andlor soils have been excessively wet
or dry in the days following application. Consult your local agricultural extension service or information about susceptible
crops and typical conditions in your area.
Precautions for Planting Cotton: Following application of 2,4-0 LV 6 and following a minimum of 1" rainfall or irrigation in
a 24 hr. period, wait an interval of 30 days prior to planting cotton. Failure to observe these precautions may result in crop
injury.
CONSERVATION RESERVE PROGRAM AREA PASTURES AND RANGELAND NOT IN AGRICULTURAL PRODUCTION
WEEDS AMOUNT OF 2,4-0 LV 6 DIRECTIONS
PER ACRE
Annual broad leaf 1-1/2 to 2-3/4 pints Do not apply after heads form or when grass is in boot to milk stage when a
weeds and * perennial seed crop is desired. DO NOT use on alfalfa, clover, other legumes, or
weeds newly seeded pastures. For aerial application, apply the recommended
amount in a minimum of 2 gallons of water per acre. For ground
application, use a minimum of 10 gallons of water per acre.
** Buckbrush, 2-3/4 pints Apply in 5 to 10 gallons of water plus 1 gallon of oil or 1-2 quarts of a crop
coyotebrush, oil concentrate with at least 17 % emulsifiers, per acre or a non-ionic
rabbitbrush, surfactant at .25% vlv surfactant to water -- (1 quart per 100 gallons of
sagebrush, and other water) per acre.
chaparral species
** Sand shinnery oak 2-3/4 pints Apply in 5 gallons of oil or 4 gallons of water plus 1 gallon of oil or 1-2
quarts of a crop oil concentrate with at least 17 % emulsifiers, per acre or a
non-ionic surfactant at .25% vlv surfactant to water -- (1 quart per 100
gallons of water) per acre.
1* Deep-rooted perennial weeds may require the higher rate or repeated treatments. ** Woody plants and any regrowth may/
9 (6//3
require repeat treatments. ( ("
RESTRICTIONS AND LIMITATIONS FOR PASTURES, RANGELAND, AND PROGRAM AREAS:
• The preharvest interval (PHI) is 7 days (cut forage for hay).
• Postemergence:
Limited to 2 applications per year.
Maximum of 2.8 pts (2 Ibs. ae) per acre per application.
Minimum of 30 days between applications.
If grass is to be cut for hay, Agricultural Use Requirements for the Worker Protection Standard are applicable.
For program lands, such as Conservation Reserve Program, consult program rules to determine whether grass or hay
may be used. The more restrictive requirements of the program rules or this label must be followed.
PASTURES AND RANGELAND (established grass pastures, rangeland, and perennial grasslands not in agricultural
production, excluding Conservation Reserve areas)
For susceptible annual and biennial broadleaf weeds: Do not apply more than 1.4 pts (1 lb. ae) per acre per application.
For moderately susceptible biennial and perennial broad leaf weeds and difficult to control weeds and woody plants: Do not
apply more than 2.8 pts (2 Ibs. ae) per acre per application.
For spot treatment: Do not apply more than 2.8 pts (2 Ibs. ae) per acre.
RESTRICTIONS AND LIMITATIONS FOR PASTURES AND RANGELAND:
• Do not cut forage for hay within 7 days of application.
• Maximum of two applications per year.
• Do not apply more than 4 Ibs. ae/acre per year.
• The minimum retreatment interval is 30 days.
USES IN FOREST MANAGEMENT
WEEDS
Alder
Ceanothus spp.,
chinquapin, madrone,
manzanita, oak,
tan oak and other
susceptible brush
species
Alder, aspen, birch,
hazel, willow and other
competing hardwood
species
Oaks, hickory, maple,
pecan, elm, sumac,
sweetgum, hawthorn,
and other hardwoods
Alder, cascara, cherry,
poplar, serviceberry
and other susceptible
deciduous brush
species
AMOUNT OF 2,4-D LV 6
PER ACRE
1-1/3 to 4 pints
DIRECTIONS
Conifer Release: Apply as a foliage spray in 8 to 25 gallons of water. Treat
when % of the brush foliage has attained full size leaves and before new
conifer growth reaches 2" in length. This is usually between early May and
mid-June. Adjust treatment date depending on stage of growth and brush
species. This may cause leader deformation on exposed firs, but they
should overcome this during the second year after spraying.
4 to 5-1/3 pints Conifer Release: To control susceptible brush species and to release
Douglas fir, hemlock, sitka spruce or grand fir, apply up to 2 qts. per acre
before new growth on Douglas fir is 2" long. To control manzanita and
ceanothus in ponderosa pine, apply 2 to 2-2/3 qts. per acre before pine
growth begins in spring. To increase performance, add 2 to 4 qts. of diesel,
fuel oil, kerosene, or a suitable approved agricultural surfactant at
recommended label rate.
2 to 4 pints Apply as a foliage spray in 8 to 25 gallons water after northern conifers,
jack pine, red pine, black spruce, and white spruce cease growth and
"harden off' (usually in mid-July). Since this treatment may cause
occasional conifer injury, do not use if such injury cannot be tolerated.
Consult your regional or extension forester or state herbicide specialist for
recommendations to fit local conditions.
0.7 ml per injection Tree Injections (pine release): Apply undiluted product in a concentrate tree
injector calibrated to apply 0.7 ml per injection. Space injections 2" apart,
edge to edge, completely around the tree and close to the base. The
injector bit must penetrate the inner bark. On hard-to-kill species such as
hickory, dogwood, red maple, blue beech and ash, make injections 1-1/2"
apart, edge to edge. Treatment may be made at any time of the year For
best results, injections should be made during growing season, May 15-
October 15. For dilute injections, mix 2/3 ga/. of product in 19 gals. of
water.
4 pints Dormant Application (other than pine): Apply up to 2 qts. per acre in
sufficient diesel, fuel oil or kerosene for good coverage. Application may
be made by ground or air and should be made before conifer bud break.
False dandelion,
klamath weed, plan­
tain, tansy ragwort,
and other over-winter­
ing susceptible weeds
Alder
Broadleaf weeds (See
"Weed List")
2-2/3 f:-" Its
10 /1(/2
Dormant Application (pine only): 1\,,,,,l(e application while pine buds are still 1
dormant. Apply in sufficient water for good coverage by air or ground I
equipment. Do not use this application unless some pine injury is
acceptable. Use of diesel, kerosene, or other oil, or addition of surfactants
to spray mix may cause unacceptable pine injury.
1-1/3 to 4 pints Herbaceous Weed Control: Apply in sufficient water for good coverage.
Make application at rates and timing indicated above if pines are present.
For control of hazel brush and similar species in the Lake States area,
apply 1-1/3 quarts per acre in 8 to 25 gals. of water, when new shoot
growth of hazel is complete (usually mid-July).
2-1/3 to 5-1/3 pints Site Preparation (as dormant spray): Prior to planting seedlings, apply in
diesel, fuel oil, or similar oil before foliage is % full size. Application may be
made by air or ground.
2-1/3 to 5-1/3 pints Site Preparation (as foliage spray): Prior to planting seedlings, apply in 8 to
25 gals. of water after most alder leaves are full size. To increase
penetration, 2 to 4 qts. per acre of diesel, fuel oil, kerosene or a suitable I
approved agricultural surfactant at recommended label rates may be added
to the spray mixture.
2/3 to 1-1/3 pints Christmas Tree Plantations: In Douglas fir Christmas trees, apply over the
top by ground or aerial application equipment only when the trees are
dormant, prior to bud break. Do not spray over the top of pine or true firs
(Abies spp.). Directed sprays may be made to weeds in Christmas tree
plantations of all conifer species, but the spray must not contact tree foliage
as injury may occur. Do not apply to weakened, diseased, or stressed
seedlings since unacceptable injury may occur. This product may be
mixed with atrazine for Christmas tree application. Read and follow the
atrazine label used for precautionary statements, directions for use,
geographic and other restrictions.
RESTRICTIONS AND LIMITATIONS FOR USES IN FOREST MANAGEMENT:
• Broadcast application:
Limited to one broadcast application per year.
Maximum of 5.7 pints ( 4 Ibs. ae) per acre per broadcast application.
• Injection:
Limited to one injection application per year.
Maximum of 1-1/3 ml of6lbs. ae formulation per injection site.
NON-CROP AREAS - Fence Rows, Hedgerows, Roadsides, Ditches, Rights-of-Way, Airfields, Railroad, Highway and Utility
Rights-of-Way, Industrial Sites, and Other Non-Crop Areas.
Spot Treatment: To control broadleaf weeds or brush in non-cropland areas, apply 4 fl. oz. in 3 gallons of water, mixing
thoroughly, and spray to run-off. This high dosage rate may only be used where injury can be tolerated.
WEEDS AMOUNT OF 2,4-0 LV6 DIRECTIONS
PER ACRE
Annual broad leaf weeds 1-1/3 to 2-2/3 pints Apply when weeds are young and growing vigorously.
Perennial and biennial 2 to 2-2/3 pints Spray perennial weeds when near the bud stage, but not flowering. Do
broad leaf weeds not use on St. Augustine grass. Bentgrass, clover, legumes and
dichondra may be injured. Do not apply to newly seeded areas until grass
is well established. Deep-rooted perennials may require repeated
treatments.
Tansy ragwort and musk Apply in rosette stage before bolting.
thistle
Wild onion and wild garlic Treat in the early spring and fall when young and actively growing.
Woody plants - Ground 5-1/3 pints Apply in 20 to 100 gallons of water. For increased effectiveness, add a
application crop oil concentrate with at least 17 % emulsifiers at 1-2 quarts per acre
or a non-ionic surfactant at .25% v/v surfactant to water -- 1 quart per 100
gallons of water. Spray volumes of up to 500 gallons per acre may be
needed for control if brush is dense.
Woody plants - Aerial 2-2/3 to 5-1/3 pints For solid stands of susceptible brush, apply in 3 to 12 gallons volume per
application acre. 2 to 4 quarts of fuel oil may be included in this mixture.
RESTRICTIONS AND LlMITATIONv·r=-O-R-N-O-N---C-R-O-P-A-R-E-AS-:----------\(
11 (2/ 1,3
------------~~----~!
•
•
•
•
Postemergence (annual and perennial weeds):
Limited to 2 applications per year.
Maximum of 2.85 pts. (2 Ibs. ae) per acre per application.
Minimum of 30 days between applications.
Postemergence (woody plants):
Limited to 1 application per year.
Maximum of 5.7 pts. (4 Ibs. ae) per acre per year.
Application to non-cropland areas are not applicable to treatment of commercial timber or other plants being grown for
sale or other commercial use, or for commercial seed production, or for research purposes.
TURF GROWN FOR SEED OR SOD (DO NOT USE IN CALIFORNIA)
WEEDS AMOUNT OF 2,4-0 LV6 DIRECTIONS
PER ACRE
Annual broad leaf weeds 2/3 to 1 pint * Apply to established stands before the seed head comes into the
boot stage. Do not spray in boot stage of growth. For seedling
Perennial and biennial 1-1/3 to 2 pints * grasses, apply in the spring after grass has tillered or has at least 5
weeds leaves, but before the boot stage.
* Use only the low rate on seedling grasses.
RESTRICTIONS AND LIMITATIONS FOR TURF GROWN FOR SEED OR SOD:
• Limited to 2 applications per year.
• Maximum of 2.85 pts. (2 Ibs. ae) per acre per application.
• Minimum of 21 days between applications~
TURF, ORNAMENTAL (golf courses, parks, cemeteries, sports fields, turf grass, and other lawn and grass areas)
AMOUNT OF 2,4-0 LV 6
WEEDS
PER ACRE
DIRECTIONS
Annual broad leaf weeds 1-1/3 pints The maximum number of broadcast applications per treatment site is 2
per year. Do not apply to newly seeded areas until grass is well
Biennial and perennial 1-1/3 to 2-1/8 established. Where bentgrass predominates, make 2 applications of a
weeds pints * 2/3 pint per acre at 3 week intervals. Do not use on susceptible southern
grasses such as St. Augustine, bentgrass and dichondra.
* Deep-rooted perennials may require repeat applications. Clovers and legumes may be injured by this treatment.
RESTRICTIONS AND LIMITATIONS FOR TURF, ORNAMENTAL (golf courses, parks cemeteries, sports fields, turf grass,
and other lawn and grass areas):
• Paste mergence:
• Limited to 2 applications per year.
• Maximum of 2.14 pts. (1.5 Ibs. ae) per acre per application.
• The maximum seasonal rate is 4.28 pints (3 Ibs. ae) per acre, excluding spot treatments.
WARRANTY DISCLAIMER
The directions for use of this product must be followed carefully. TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, (1) THE GOODS DELIVERED TO YOU ARE FURNISHED "AS IS" BY MANUFACTURER OR SELLER AND (2)
MANUFACTURER AND SELLER MAKE NO WARRANTIES, GUARANTEES, OR REPRESENTATIONS OF ANY KIND
TO BUYER OR USER, EITHER EXPRESS OR IMPLIED, OR BY USAGE OF TRADE, STATUTORY OR OTHERWISE,
WITH REGARD TO THE PRODUCT SOLD, INCLUDING, BUT NOT LIMITED TO MERCHANTABILITY, FITNESS FOR
A PARTICULAR PURPOSE, USE, OR ELIGIBILITY OF THE PRODUCT FOR ANY PARTICULAR TRADE USAGE.
UNINTENDED CONSEQUENCES, INCLUDING BUT NOT LIMITED TO INEFFECTIVENESS, MAY RESULT BECAUSE
OF SUCH FACTORS AS THE PRESENCE OR ABSENCE OF OTHER MATERIALS USED IN COMBINATION WITH
THE GOODS, OR THE MANNER OF USE OR APPLICATION, INCLUDING WEATHER, ALL OF WHICH ARE
BEYOND THE CONTROL OF MANUFACTURER OR SELLER AND ASSUMED BY BUYER OR USER. THIS WRITING
CONTAINS ALL OF THE REPRESENTATIONS AND AGREEMENTS BETWEEN BUYER, MANUFACTURER AND
SELLER. AND NO PERSON OR AGENT OF MANUFACTURER OR SELLER HAS ANY AUTHORITY TO MAKE ANY
REPRESENTATION OR WARRANTY OR AGREEMENT RELATING IN ANY WAY TO THESE GOODS.
LIMITATION OF LIABILITY
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, IN NO EVENT SHALL MANUFACTURER OR SELLER BE
i
r (12 13/G
LIABLE FOR SPECIAL, I NCIDENT1L::-, 0R CONSEQUENTIAL DAMAGES, OR FL;,,~ DAMAGES IN THEIR NATURE OF
PENALTIES RELATING TO THE GOODS SOLD, INCLUDING USE, APPLICATION, HANDLING, AND DISPOSAL.
MANUFACTURER OR SELLER SHALL NOT BE LIABLE TO BUYER OR USER BY WAY OF INDEMNIFICATION TO
BUYER OR TO CUSTOMERS OF BUYER, IF ANY, OR FOR ANY DAMAGES OR SUMS OF MONEY, CLAIMS OR
DEMANDS WHATSOEVER, RESULTING FROM OR BY REASON OF, OR RISING OUT OF THE MISUSE, OR
FAILURE TO FOLLOW LABEL WARNINGS OR INSTRUCTIONS FOR USE, OF THE GOODS SOLD BY
MANUFACTURER OR SELLER TO BUYER. ALL SUCH RISKS SHALL BE ASSUMED BY THE BUYER, USER, OR
ITS' CUSTOMERS, BUYER'S OR USER'S EXCLUSIVE REMEDY, AND MANUFACTURER'S OR SELLER'S TOTAL
LIABILITY SHALL BE FOR DAMAGES NOT EXCEEDING THE COST OF THE PRODUCT.
If you do not agree with or do not accept any of directions for use, the warranty disclaimers, or limitations on liability, do
not use the product, and return it unopened to the Seller, and the purchase price will be refunded.
AgriSolutions™ is a trademark and Complete Compatibility®, Preference®, and Protank® are registered trademarks of
Winfield Solutions, LLC.
Ally®, Harmony Extra®, Express®, and Finesse® are registered trademarks of E.\. duPont de Nemours and Company.