docker: production image + Gitea Actions for monthly refresh

Dockerfile: self-contained image with corpus + Chroma + BM25 baked
in. Drawbar's compose pulls + runs without volume mounts. Built from
sources.json (labels schema), PRODUCT_NAME=crop_chem by default,
HYBRID_SEARCH=true (always-on for production quality). RERANK_URL +
OLLAMA_URL get set at compose time.

.gitea/workflows/refresh.yml: monthly cron (1st @ 06:00 UTC) does
full scrape → reindex → image push. Scrapes Bayer (~30 min) +
EPA PPLS row-crop filtered (~7h). Skips reindex+push if no corpus
diff. Tags pushed: :latest, :<sha12>, :corpus-<YYYY.MM.DD>.

.gitea/workflows/image-only.yml: on-demand or auto on code-only
pushes to main (paths: docs_mcp/, rag/, scrape/, requirements.txt,
Dockerfile, sources.json). Reindexes from committed corpus, builds
image, pushes. ~10 min vs ~9h full refresh.

.gitignore: corpus/ now COMMITTED (4,159 labels, 265 MB of .md +
sidecars). Lets image-only.yml rebuild indexes without re-scraping.
chroma/ + bm25/ still gitignored (regenerable binary indexes).

.dockerignore: drops venv, eval results, PLAN/README/CLAUDE.md,
deploy/, .git/ — keeps the image lean. corpus + chroma + bm25
explicitly NOT in dockerignore (those go INTO the image).

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

corpus/epa_ppls/1381-250.md

@@ -0,0 +1,874 @@
+# SHREDDER 2,4-D LV6
+
+- EPA Reg No: **1381-250**
+- Registrant: WINFIELD SOLUTIONS, LLC
+- Signal word: Caution
+- Active ingredients: 2,4-D, 2-ethylhexyl ester (88.8%)
+- Label accepted: 2017-12-13
+- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/001381-00250-20171213.pdf
+
+---
+December 13, 2017
+Subject:
+Dear Ms. Mathias:
+Sincerely,
+Notification Label Acceptable v.20150904
+The label submitted with the application has been stamped “Notification” and will be placed in our 
+records. The alternate brand name 2,4-D LV6 has been added to the product record.
+OFFICE OF CHEMICAL SAFETY 
+AND POLLUTION PREVENTION
+Kathryn Montague, Product Manager 23 
+Herbicide Branch
+Registration Division (7505P) 
+Office of Pesticide Programs
+Should you wish to add/retain a reference to the company’s website on your label, then please be aware 
+that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide Act and is 
+subject to review by the Agency. If the website is false or misleading, the product would be misbranded 
+and unlawfill to sell or distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) list examples of 
+statements EPA may consider false or misleading. In addition, regardless of whether a website is 
+referenced on your product’s label, claims made on the website may not substantially differ fiom those 
+claims approved through the registration process. Therefore, should the Agency find or if it is brought to 
+our attention that a website contains false or misleading statements or claims substantially differing from 
+the EPA approved registration, the website will be referred to the EPA’s Office of Enforcement and 
+Compliance.
+The Agency is in receipt of your Application for Pesticide Notification under Pesticide Registration 
+Notice (PRN) 98-10 for the above referenced product. The Registration Division (RD) has conducted a 
+review of this request for its applicability under PRN 98-10 and finds that the action requested fails within 
+the scope of PRN 98-10.
+Lisa Mathias 
+Registration Specialist
+Winfield Solutions, LLC 
+PO Box 64589 
+St. Paul, MN 55164-0589
+Notification per PRN 98-10 - Minor Label Revisions 
+Product Name: SHREDDER 2,4-D LV6
+EPA Registration Number: 1381-250
+Application Date: 8/8/2017
+Decision Niunber: 535504
+If you have any questions, you may contact Sarah Meadows at 703-347-0505 or via email at 
+meadows.sarah@epa.gov.
+___
+UNITED STATES ENVIRONMENTAL PROTECTION AGENCY 
+WASHINGTON, DC 20460
+
+1
+GROUP HERBICIDE
+EPA Reg. No. 1381-250 EPA Est. No. 
+NET CONTENTS GALLONS
+changes, cither than refw; 
+the Agencs' h-avc been made i 1/0808/ 71/0313/7
+Winfield
+4
+Personal Protective Equipment
+All mixers, loaders, applicators, flaggers, and other handlers must wear:
+- Long-sleeved shirt and long pants.
+- Chemical-resistant gloves made of any waterproof material when applying with any handheld nozzle or equipment, mixing 
+or loading, cleaning up spills or equipment, or otherwise exposed to the concentrate.
+- Chemical-resistant apron when mixing or loading, cleaning up spills or equipment, or otheoA'ise exposed© to the 
+concentrate.
+- Shoes plus socks.
+See engineering controls for additional requirements.
+Follow manufacturer’s instructions for cleaning or maintaining PPE. If no such instructions for washables exist, use detergent 
+and hot water. Keep and wash PPE separately from other laundry.
+PRECAUTIONARY STATEMENTS 
+HAZARDS TO HUMANS AND DOMESTIC ANIMALS
+CAUTION
+CAUTION: Harmful if swallowed. Wash thoroughly with soap and water after handling and before eating, drinking, chewing 
+gum, using tobacco or using the toilet.
+ACTIVE INGREDIENT:
+2-ethylhexyl ester of 2,4-dichiorophenoxyacetic acid*
+OTHER INGREDIENTS:
+Total
+* 2,4-DichIorophenoxyacetic acid equivalent 59.1% or 5.6 lbs. per gal.
+Distributed By
+Winfield Solutions, LLC
+P.O. Box 64589, St. Paul, MN 55164-0089
+SEE BOOKLET FOR ADDITIONAL PRECAUTIONARY STATEMENTS, COMPLETE DIRECTIONS FOR USE, 
+WARRANTY DISLCAIMER AND LIMITATION OF LIABILITY
+..88.8%
+.11.2%
+100.0%
+FIRST AID
+IF SWALLOWED: Call a poison control center or doctor immediately for treatment advice. Have person sip a glass of 
+water if able to swallow. Do not induce vomiting unless told to by a poison control center or doctor. Do not give anything 
+by mouth to an unconscious person.___________________________________________________________________
+Have the product container or label with you when calling a poison control center or doctor or going for treatment.
+For additional information in case of emergency call toll free 1-877-424-7452.
+KEEP OUT OF REACH OF CHILDREN 
+CAUTION
+Solventless Ester Formulation for Agricultural Weed Control, 
+Conifer Release, Site Preparation, Turf, and Non-Cropland Weed Control
+Shredder® 2,4-D LV6 
+[Alternate Brand Name: 2,4-D LV61
+NOTIFICATION
+1381-250
+The applicant h-as certified rbai net 
+nited tc* 
+few the
+labelenp; Th-c .Ageaev ackncwlec^s 
+this nciliricaticin br Letter dated: 
+12/13/2017
+
+2
+USER SAFETY RECOMMENDATIONS
+Do not apply this product through any type of irrigation system.
+Users should;
+- Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet.
+- Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
+- Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible 
+wash thoroughly and change into clean clothing.
+Pilots must use an enclosed cockpit that meets the requirements listed in the Worker Protection Standard (WPS) for 
+agricultural pesticides [40 CFR 170.240 (d) (6)]. When handlers use closed systems, enclosed cabs, or aircraft, in a manner 
+that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d) 
+(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS.
+This chemical has properties and characteristics associated with chemicals detected in groundwater. The use of this 
+chemical in areas where soils are permeable, particularly where the water table is shallow, may result in groundwater 
+contamination. Application around a cistern or well may result in contamination of drinking water or groundwater.
+Engineering Controls
+{(STATEMENT TO BE ADDED WHEN CONTAINER SIZE IS 5 GALLON OR MORE)
+Do not pour product from this container. A mechanical system (pump and probe or spigot) must be used in transferring the 
+contents of this container. If the contents of a non-refillable pesticide container are emptied, the probe must be rinsed before 
+removal. If the mechanical system is used in a manner that meets the requirements listed in the Worker Protection Standard 
+(WPS) for agricultural pesticides [40 CFR 170.240 (d) (4-6)], the handler PPE requirements may be reduced or modified as 
+specified in the WPS.]
+ENVIRONMENTAL HAZARDS
+This product is toxic to fish and aquatic invertebrates. Do not apply directly to water, to areas where surface water is present, 
+or to intertidal areas below mean high water mark. Drift and runoff may be hazardous to aquatic invertebrates in water 
+adjacent to treated areas. Drift or runoff may adversely affect non-target plants. Do not contaminate water when disposing of 
+equipment washwaters or rinsate.
+DIRECTIONS FOR USE
+It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. Do not apply this product in away 
+that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during 
+application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation.
+AGRICULTURAL USE REQUIREMENTS
+Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. This 
+Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhousesand 
+handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency 
+assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal 
+protective equipment (PPE) and restricted-entry interval. The requirements in this box apply only to uses of this product that 
+are covered by the Worker Protection Standard.
+Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 12 hours. 
+PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves 
+contact with anything that has been treated, such as plants, soil, or water is;
+- Coveralls.
+- Chemical resistant gloves made of any waterproof material.
+- Shoes plus socks.
+Use of this product in certain portions of California, Oregon and Washington is subject to the January 22, 2004 Order for 
+injunctive relief in Washington Toxics Coalition, et al. v. EPA, C01-0132C, (W.D. WA). For further information, please 
+refer to EPA Web Site; http;//www.epa.gov/espp.
+Most cases of groundwater contamination involving phenoxy herbicides such as 2,4-D have been associated with 
+mixing/loading and disposal sites. Caution should be exercised when handling 2,4-D pesticides at such sites to prevent 
+contamination of groundwater supplies. Use of closed systems for mixing or transferring this pesticide will reduce the 
+probability of spills. Placement of mixing/loading equipment on an impervious pad to contain spills will help prevent 
+groundwater contamination.
+
+3
+Do not enter or allow people or pets to enter the treated area until sprays have dried.
+WEED LIST
+This product will control these plants and other 2,4-D susceptible species:
+NON-AGRICULTURAL USE REQUIREMENTS
+The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection 
+Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce 
+agricultural plants on farms, forests, nurseries, or greenhouses.
+ANNUAL AND BIENNIAL WEEDS
+Annual fanweed (field pennycress), annual yellow sweet clover, * beggarticks, bull thistle, burdock, carpetweed, chickweed, 
+cocklebur, coffeeweed, common mullein, common evening primrose, cornflower, croton, galinsoga, goatsbeard, hemp, henbit, 
+horseweed (marestail), jewelweed, jimsonweed * knotweed, * kochia, lambsquarters, mallow (Venice, dwarf, little), 
+marshelder, morningglory (common, ivy, woolly), musk thistle, mustards (except blue), pennycress, pepperweed (field), 
+** pigweeds, poorjoe (wooly plantain), * prickly lettuce, puncturevine, purslane, ragweed (common and giant), rough fleabane, 
+Russian thistle, salsify, shepherdspurse, stinkweed, * smartweeds (annual), sowthistle (annual or spiny), sunflower, 
+tansymustard, tumbleweed, velvetleaf, vetches, water primrose, * wild carrot, wild lettuce, wild parsnips, wild radish, wild 
+sweet potato.
+PERENNIAL WEEDS
+* Alfalfa, * bindweeds (hedge, field and European), blue lettuce, * broom snakeweed, buckhorn plantain, buttercup,* Canada 
+thistle, catnip, chamise, chicory, climbing milkweed, curly indigo, dandelion, * docks, * dogbanes, * goldenrod, * ground ivy,
+* hawkweed (orange), * hoary cress, * Jerusalem artichoke, locoweed, * many-flowered aster, milkvetch, * nettles, nutgrass, 
+plantains, poison ivy, pokeweed, sheep sorrel, sicklepod, sneezeweed (bitter), sowthistle (perennial), * tansy ragwort, 
+*vervains, * wild garlic, * wild onion, witchweed, wormwood, yellow rocket, yellow starthistle.
+STORAGE AND DISPOSAL
+Do not contaminate water, food or feed by storage and disposal.
+PESTICIDE STORAGE: Store in a secure area, in original container only. Do not store near feed or foodstuffs. When stored 
+at temperatures below freezing, it may be necessary to warm contents to 70° F and mix thoroughly before using.
+PESTICIDE DISPOSAL: Pesticide wastes are toxic. Improper disposal of excess pesticide, spray mixture, or rinsate is a 
+violation of Federal Law and may contaminate groundwater. If these wastes cannot be disposed of by use according to label 
+instructions, contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste representative at the 
+nearest EPA Regional Office for guidance.
+CONTAINER DISPOSAL: Use label language appropriate for container size and type.
+Nonrefillable containers. Do not reuse or refill this container. Clean container promptly after emptying.
+Nonrefillable container equal to or less than 5 gallons. Triple rinse as follows: Empty the remaining contents into 
+application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container V a full with water 
+and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or 
+disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Offer for recycling or 
+reconditioning, or puncture and dispose of in a sanitary landfill, or by other procedures approved by state and local authorities, 
+such as burning of plastic containers. If burned, stay out of smoke.
+Nonrefillable container greater than 5 gallons. Triple rinse as follows: Empty the remaining contents into application 
+equipment or a mix tank. Fill the container V a full with water. Replace and tighten closures. Tip container on its side and roll it 
+back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and 
+forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into 
+application equipment or a mix tank or store rinsate for later use of disposal. Repeat this procedure two more times. Offer for 
+recycling or reconditioning, or puncture and dispose of in a sanitary landfill, or by other procedures approved by state and local 
+authorities, such as burning of plastic containers. If burned, stay out of smoke.
+Refillable container. Refill this container with pesticide only. Do not reuse this container for any other purpose. Cleaning the 
+container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the 
+responsibility of the refiller. To clean the container before final disposal, empty the remaining contents from this container into 
+application equipment or mix tank. Fill the container about 10 percent full with water. Agitate vigorously or recirculate water 
+with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing 
+procedure two more times. Offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill, or by other 
+procedures approved by state and local authorities, such as burning of plastic containers. If burned, stay out of smoke.
+FOR CHEMICAL EMERGENCY: Spill, leak, fire, exposure or accident, call 
+CHEMTREC 1-800-424-9300.
+
+4
+Droplet Size
+When applying sprays that contain 2,4-D as the sole active ingredient, or when applying sprays that contain 2,4-D mixed with 
+active ingredients that require a Coarse or coarser spray, apply only as a Coarse or coarser spray {ASAE standard 572) or a 
+volume mean diameter of 385 microns or greater for spinning atomizer nozzles.
+When applying sprays that contain 2,4-D mixed with other active ingredients that require a Medium or more fine spray, apply 
+only as a Medium or coarser spray (ASAE standard 572) or a volume mean diameter of 300 microns or greater for spinning 
+atomizer nozzles.
+2,4-D esters may volatilize during conditions of low humidity and high temperatures. Do not apply during conditions of low 
+humidity and high temperatures.
+Wind Speed
+Do not apply at wind speeds greater than 15 mph. Only apply this product if the wind direction favors on-target deposition and 
+there are not sensitive areas (including, but not limited to, residential areas, bodies of water, known habitat for non-target 
+species, non-target crops) within 250 feet downwind. If applying a Medium spray, leave one swath unsprayed at the 
+downwind edge of the treated field.
+To delay herbicide resistance consider:
+• Avoiding the consecutive use of Shredder 2,4-D LV6 or other target site of action Group 4 herbicides that have a 
+similar target site of action, on the same weed species.
+• Using tank-mixtures or premixes with herbicides from different target site of action Groups as long as the involved 
+products are all registered for the same use, have different sites of action, and are both effective at the tank mix or 
+prepack rate on the weed(s) of concern.
+• Basing herbicide use on a comprehensive IPM program.
+• Monitoring treated weed populations for loss of field efficacy.
+• Contacting your local extension specialist, certified crop advisors, and/or Winfield Solutions, LLC representative for 
+herbicide resistance management and/or integrated weed management recommendations for specific crops and 
+resistant weed biotypes.
+Temperature Inversions
+If applying at wind speeds less than 3 mph, the applicator must determine if:
+a) conditions of temperature inversion exist, or
+b) stable atmospheric conditions exist at or below nozzle height. Do not make applications into areas of temperature
+SPRAY DRIFT MANAGEMENT
+A variety of factors including weather conditions (e.g., wind direction, wind speed, temperature, and relative humidity) and 
+method of application (e.g., ground, aerial, airblast) can influence pesticide drift. The applicator must evaluate all factors and 
+make appropriate adjustments when applying this product.
+RESISTANCE MANAGEMENT RECOMMENDATIONS
+Shredder 2,4-D LV6 is a Group 4 herbicide. Any weed population may contain or develop plants naturally resistant to 
+Shredder 2,4-D LV6 or other Group 4 herbicides. Weed species with acquired resistance to Group 4 may eventually 
+dominate the weed population if Group 4 herbicides are used repeatedly in the same field or in successive years as the 
+primary method of control for targeted species. This may result in partial or total loss of control of those species by Shredder 
+2,4-D LV6 or other Group 4 herbicides.
+USE DIRECTIONS
+Unless noted otherwise under individual DIRECTIONS section, for aerial application, apply the specified amount in a 
+minimum of 2 gallons of water per acre. For ground application, apply the specified amount in a minimum of 3 gallons of water 
+per acre. Use more water for both methods when adverse growing conditions are present. Do not apply with high spray 
+pressures, hollow cone or other nozzle types that produce small spray droplets which may drift. The use of a suitable drift 
+control agent at the proper rate will aid in the reduction of spray drift. Apply when weather is warm and plants are rapidly 
+growing. Cold weather or dry conditions may cause poor results. Do not apply if rain is expected within an hour. Consult your 
+local agronomist or Extension specialist for specific use and crop tolerance situations.
+*BRUSH
+Boxelder, buckbrush, coyotebrush, elderberry, manzanita, rabbitbrush, sagebrush (coastal, big, sand), sand shinnery oak, 
+sumac, willow.
+* These species may require repeat treatments and/or the higher specified rate. ** Control of pigweeds in the Texas and 
+Oklahoma High Plains may be difficult.
+
+5
+inversions or stable atmospheric conditions.
+Additional requirements for aerial applications:
+Additional requirements for ground boom application:
+Do not apply with a nozzle height greater than 4 feet above the crop canopy.
+Other State and Local Requirements
+Applicators must follow all state and local pesticide drift requirements regarding application of2,4-D herbicides. Where states 
+have more stringent regulations, they must be observed.
+The boom length must not exceed 75% of the wingspan or 90% of the rotor blade diameter. Release spray at the lowest 
+height consistent with efficacy and flight safety. Do not release spray at a height greater than 10 feet above the crop canopy 
+unless a greater height is required for aircraft safety. This requirement does not apply to forestry or rights-of-way applications. 
+When applications are made with a crosswind, the swath will be displaced downwind. The applicator must compensate for 
+this by adjusting the path of the aircraft upwind.
+WATER AND SOYBEAN OIL OR PETROLEUM OIL-BASED SPRAY- First mix this product with the oil; then add to water. 
+If vigorous agitation is possible, the oil can be added last. DO NOT ADD OIL FIRST!
+SOYBEAN OIL OR PETROLEUM OIL-BASED SPRAY: Add this product to straight oil to form a solution. Do not allow water 
+to get into this mixture, if it does, an invert emulsion will occur.
+Wash spray equipment thoroughly with a tank cleaner after using this product. When cleaning equipment, do not pour 
+washwater on the ground; spray or drain over a large area away from wells or other water sources. Apply the recommended 
+amount of 2,4-D per acre regardless of the amount of diluent used.
+NITROGEN FERTILIZER: Weed and feed applications for corn, small grains, grasses grown for seed or grass pastures 
+according to label use rates. - Add halfthe fertilizer to the tank; then add recommended label amount of this product per acre. 
+Agitate constantly and vigorously and finish filling spray tank with fertilizer. Apply as soon as possible, agitating constantly. 
+Do not hold spray mixture overnight. If incompatibility is a problem, the use of a compatibility agent at the recommended label 
+rate may correct the problem. Fertilize according to the recommendations of your supplier or your Extension specialist. 
+Herbicide foliage contact burning may occur as a result of fertilizer use. Lower use ratesand concentrationswill reduce this 
+problem.
+Susceptible Plants
+Do not apply under circumstances where spray drift may occur to food, forage, or other plantings that might be damaged or 
+crops thereof rendered unfit for sale, use or consumption. Susceptible crops include, but are not limited to, cotton, okra, 
+flowers, grapes (in growing stage), fruit trees (foliage), soybeans (vegetative stage), ornamentals, sunflowers, tomatoes, 
+beans, and other vegetables, or tobacco. Small amounts of spray drift that might not be visible may injure susceptible 
+broadleaf plants.
+Equipment
+All aerial and ground application equipment must be properly maintained and calibrated using appropriate carriers or 
+surrogates.
+Adjuvants for Preemergence and Preplant Applications: A non-ionic surfactant or a crop oil concentrate may be 
+added to the spray solution when this product is applied preemergence or preplant to increase control of large or difficult 
+to control weeds. Crop oil concentrates must contain at least 17% emulsifier, and should be used at 1% volume/volume 
+(1 gallon per 100 gallons of spray solution). Non-ionic surfactants should be used at 0.25% volume/volume (1 quart per
+100 gallons of spray solution). When an adjuvant is to be used with this product, Winfield Solutions, LLC recommends 
+the use of a Council of Producers & Distributors of Agrotechnology Chemical Producers and Distributors Association 
+certified adjuvant.
+MIXING INSTRUCTIONS
+WATER BASED SPRAY - Fill the equipment half full of water, agitate while adding this product; then add the rest of water.
+TANK MIXES
+It is the pesticide user’s responsibility to ensure that all products used in tank mixtures are registered for the intended use. 
+Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.
+
+6
+RATE PER ACRE
+3/4 pint
+3/4 to 1-1/3 pints
+1-1/3 pints
+1/3 pint
+Perennial broadleaf weeds 2/3 pint **
+Postemergence - Annual 
+broadleaf weeds
+Apply after silks are completely brown to reduce weeds that interfere 
+with harvest and reduce weed seed production. Do not apply to sweet 
+corn.
+Apply after corn is planted but before emergence for control of 
+emerged broadleaf weeds. The seed furrow must be completely 
+closed at application or severe crop injury may result.
+2/3 to 1-1/3 
+pints *
+DIRECTIONS
+Planting of corn must be delayed a minimum of 7 days after 
+application at rates upto 1 pint per acre, and a minimum of 14 days at 
+rates from 1 to 1-1/2 pints per acre. Planting sooner after application 
+than specified on this label may result in unacceptable crop injury.
+CORN - all corn including FIELD, SWEET AND POP
+WEEDS
+Preplant-
+Annual and biennial broadleaf
+seedlings
+Perennial weed seedlings and
+existing cover crops
+• Do not perform tillage for at least 7 days after application. Do not use on sandy soils or unacceptable crop injury may result. 
+Preemergence and reduced
+tillage.-Broadleaf weeds and
+annual grasses.
+• Use higher rate on soils high in organic matter. Do not use on sandy soils or unacceptable crop injury may result.
+Apply when corn is less than 8 inches tall, but to avoid crop injury do
+not apply just after leaves have unfolded. If corn is over 8 inches tall, 
+use drop nozzles to keep spray off of corn foliage as much as 
+possible. See additional restrictions below.
+Apply when weeds are in bud to bloom stage. If com is over 8 inches 
+tall, use drop nozzles to keep spray off corn foliage as much as 
+possible.
+Sweet Corn: To minimize potential for crop injury, use only lowest 
+rate in rate range.
+** DO NOT apply from 2 weeks before tasseling to dough stage. DO NOT apply to open whorls. To avoid injury, do not use 
+with atrazine, oil or other adjuvants. Application during high moisture and temperature conditions may cause injury or 
+brittleness. DO NOT cultivate for a week to 10 days after treatment or stalk breakage may occur.
+Late season weed control
+Preharvest (Field corn and
+popcorn only)
+• Use lower rate for small annual and biennial weeds. Use the higher rate for perennial and larger hard-to-kill annual and 
+biennial weeds.
+RESTRICTIONS AND LIMITATIONS FOR FIELD CORN AND POPCORN;
+• Do not use treated crop as fodder for 7 days following application.
+• The preharvest interval (PHI) is 7 days.
+• Maximum of 4.28 pts. (3 lbs. ae) per acre per crop cycle.
+• Preplant or preemergence;
+Limited to one preplant or preemergence application per crop cycle.
+Maximum of 1.42 pts. (1 lb. ae) per acre per application.
+• Postemergence;
+Limited to one postemergence application per crop cyde.
+Maximum of 0.7 pt. (1/2 lb. ae) per acre per application.
+• Preharvest;
+Limited to one preharvest application per crop cycle.
+Maximum of 2.14 pts. (1 1/2 lbs. ae) per acre per application.
+RESTRICTIONS AND LIMITATIONS FOR SWEET CORN;
+• Do not use treated crop as fodder for 7 days following application.
+• The preharvest interval (PHI) is 45 days.
+• Minimum of 21 days between applications.
+• Maximum of 2.14 pts. (1 1/2 lbs. ae) per acre per crop cycle.
+• Preplant or preemergence;
+Limited to one preplant or preemergence application per crop cycle.
+Maximum of 1.42 pts. (1 lb. ae) per acre per application.
+• Postemergence;
+Limited to one postemergence application per crop cyde.
+Maximum of 0.7 pt. (1/2 lb. ae) per acre per application.
+
+7
+2/3 pint
+Amount 
+Per Acre
+SORGHUM-SUDAN GRASS HYBRIDS 
+(Forage Crop Only):
+5 to 11.4 fluid 
+ounces
+DIRECTIONS
+To control small broadleaf weeds, apply when sorghum-sudan has at least 6 
+leaves, is well established, and is 5 to 10 inches tall.
+WEEDS
+Annual broadleaf weeds
+(Postmergence) and
+Perennial broadleaf weeds
+(Postmergence)
+Plant Response: Even when sprayed at the proper stage, some crop injury is likely, including reduced seed production. If 
+risk of crop injury is unacceptable, do not use this product. The lower rate may reduce the risk of crop injury, but will result in 
+reduced weed control.
+SOYBEANS 
+WEEDS
+Preplant - Emerged 
+broadleaf weeds.
+GRAIN SORGHUM 
+WEEDS I
+Annual broadleaf 
+weeds
+Perennial 
+broadleaf weeds
+RATE PER ACRE
+1/2 pint
+RATE PER ACRE
+2/3 to 1-1/3 pints
+DIRECTIONS
+Apply to plants that are 5 to 15 inches tall. DO NOT treat plants less than 5 
+inches tall or from boot to early dough stage. Use drop nozzles when crop is 8 
+inches or taller.
+The higher rate may be needed for some weeds, but chances of crop injury may 
+increase.
+DO NOT use oil. Some varieties and hybrids are 2,4-D sensitive. Crop injury may also be increased by high moisture and 
+temperature conditions. Check with your seed company and Extension Service for advice.
+RESTRICTIONS AND LIMITATIONS FOR GRAIN SORGHUM:
+• The preharvest interval (PHI) is 30 days.
+• Do not permit meat or dairy animals to consume treated crop as fodder or forage for 30 days following application.
+• Postemergence;
+Limited to 1 application per crop cycle.
+Maximum of 0.7 pt. (1/2 lb. ae) per acre per application.
+DIRECTIONS
+After applying, plant soybean seed as deep as practical or at least 1-1/2 to 2 
+inches deep. Seed furrow must be completely closed or severe crop injury 
+will result.
+USE RESTRICTIONS AND LIMITATIONS FOR SOYBEANS: Do not perform tillage for at least 7 days after application. Do 
+not use on sandy soils or unacceptable crop injury may result. Do not replant treated fields in the same growing season with 
+crops that are not labeled for 2,4-D preplant use.
+• The maximum rate per crop cycle is 1.43 pints (1 lbs. ae) per acre.
+• Preplant:
+Limited to 2 preplant applications per crop cycle.
+Maximum of 0.7 pint (1/2 lb. ae) per acre per preplant application.
+Apply not less than 7 days prior to planting soybeans.
+OR
+• Preplant:
+Limited to 1 application per crop cycle.
+Maximum of 1.43 pints (1 lb. ae) per preplant application.
+Apply not less than 15 days prior to planting soybeans.
+PRECAUTIONS FOR PLANTING SOYBEANS: If product is applied at the higher limit of listed rates and if soil 
+temperatures have been cold and/or soils have been excessively wet or dry in the days following application, risk of crop 
+injury is increased.
+
+8
+Perennial broadleaf weeds2/3 to 1-1/3 pints **
+1/3 to 2/3 pint**
+1 to 1-1/3 pints *
+Spring-seeded oats 1/3 to 1/2 pint*
+Apply at full tiller, but before early boot stage {Zadoks 25 to 4o).1/2 to 1 pint*
+2/3 to 1-1/3 pints*
+5.7 to 11.4 
+fluid ounces
+Apply when grain is in hard dough stage (Zadoks 8? ) to control 
+weeds that will interfere with harvest. Apply when soil moisture is 
+adequate for weed growth for best results.
+RESTRICTIONS AND LIMITATIONS FOR SORGHUM-SUDAN GRASS HYBRIDS:
+• Do not treat crop over 10 inches tall through maturity.
+• The preharvest interval (PHI) is 30 days.
+• Do not permit meat or dairy animals to consume treated crop as fodder or forage for 30 days following application.
+• Postemergence;
+Limited to 1 application per crop cycle.
+Maximum of 11.4 fluid ounces (0.5 lb. ae) per acre per application.
+Apply 1 pint rate when grain is at full tiller and wild garlic and onion 
+plants are small. Apply 1-1/3 pints after the harvest to the crop 
+stubble. For control of new fall growth of these plants, refer to the 
+fallow land use directions.
+Apply at full tiller, but before early boot stage (Zadoks 25 to 4o).
+DIRECTIONS
+To control small broadleaf weeds, apply when sorghum-sudan has at least 6 
+leaves, is well established, and is 5 to 10 inches tall.
+Apply only in the spring when crop is fully tillered, but before grain is 
+in boot stage (before Zadoks 4o). For improved control of difficult 
+weeds, apply up to 2 pints per acre.
+** DO NOT USE THE HIGHER RATE IF POSSIBLE CROP DAMAGE IS NOT ACCEPTABLE
+Wild garlic or onions
+DIRECTIONS
+Apply when grain is in full tiller stage (4 to 8 inches high) but before 
+boot stage (Zadoks 25 to 4o) when weeds are small and actively 
+growing. Up to 1-1/3 pints per acre may be used to control difficult 
+weed problems, but do not use unless some crop damage is 
+acceptable.
+Apply only in the spring when crop is fully tillered, but before grain is 
+in boot stage (before Zadoks 4o). For improved control of difficult 
+weeds, apply up to 2 pints per acre.
+** DO NOT USE THE HIGHER RATE IF POSSIBLE CROP INJURY IS NOT ACCEPTABLE
+Use in combination with a product of a different mode of action to control resistant weeds 
+such as kochia and Russian thistle. Follow application directions on each product label.
+SORGHUM-SUDAN GRASS
+{POSTEMERGENCE APPLICATION RATE)
+Amount
+Per Acre
+Spring and winter wheat and 
+barley
+Resistant weeds
+Winter wheat and rye 
+Annual weeds
+Fall seeded oats grown for
+grain (Southern)
+* Difficult to control weeds may require higher rate, but some injury may occur since oats are less tolerant to 2,4-D than 
+wheat or barley. DO NOT spray during or just after cold weather.
+Preharvest - Cereal grains
+RATE PER ACRE
+1/3 to 1-1/3 pints*
+WEEDS
+Annual broadleaf weeds
+(Postmergence) and
+Perennial broadleaf weeds
+(Postmergence)
+Plant Response: Even when sprayed at the proper stage, some crop injury is likely, including reduced seed production. If risk 
+of crop injury is unacceptable, do not use this product. The lower rate may reduce the risk of crop injury, but will result in 
+reduced weed control.
+RESTRICTIONS AND LIMITATIONS FOR SORGHUM-SUDAN GRASS:
+• Do not treat crop over 10 inches tall through maturity.
+• The preharvest interval (PHI) is 30 days.
+• Do not permit meat or dairy animals to consume treated crop as fodder or forage for 30 days following application.
+SMALL GRAINS -Not underseeded with legumes
+WEEDS
+Postemergence - Spring
+wheat, barley, and rye
+Annual and biennial weeds
+
+Biennial weeds 1-2/3 to 2-2/3 pints
+Perennial weeds 1-2/3 to 2-2/3 pints
+2-2/3 pints
+2-3/4 pints** Buckbrush, 
+coyotebrush, 
+rabbitbrush,
+sagebrush, and other 
+chaparral species
+____________________________________________________________________________________________________________________9______________
+• Use the lower rate for small annual and biennial weeds. Use the higher rate for perennial weeds or hard-to-kill annual or biennial weeds. 
+The higher rate should be used only where heavy weed infestation is a problem and increased risk of crop damage is acceptable. 
+RESTRICTIONS AND LIMITATIONS FOR SMALL GRAINS;
+• The preharvest interval (PHI) is 14 days.
+• Postemergence;
+Limited to one postemergence application per crop cycle.
+Maximum of 1,78 pts. (1 1/4 lbs. ae) per acre per application.
+• Preharvest;
+Limited to one preharvest application per crop cycle.
+Maximum of 0,7 pt. (1/2 lbs. ae) per acre per application.
+• Limited to 2.5 pts. (1 3/4 lbs, ae) per acre per crop cycle.
+or postharvest to crops, or between crops)____________________
+DIRECTIONS
+Use the lower rate on small actively growing weeds. Use the higher rate 
+on larger or weather stressed weeds.
+Use the lower rate in the Spring on biennial weeds such as the musk 
+thistle during the rosette stage before stalks have formed. Use the higher 
+rate after stalk formation or in the Fall.
+Apply during the bud to bloom stage while weeds are actively growing. Do 
+not till for 2 weeks after treatment or until the weeds start to die. 
+Apply to regrowth in fall after harvest.
+CONSERVATION RESERVE PROGRAM AREA PASTURES AND RANGELAND NOT IN AGRICULTURAL PRODUCTION 
+DIRECTIONS
+Do not apply after heads form or when grass is in boot to milk stage when a 
+seed crop is desired. DO NOT use on alfalfa, clover, other legumes, or 
+newly seeded pastures. For aerial application, apply the recommended 
+amount in a minimum of 2 gallons of water per acre. For ground 
+application, use a minimum of 10 gallons of water per acre.
+Apply in 5 to 10 gallons of water plus 1 gallon of oil or 1-2 quarts of a crop 
+oil concentrate with at least 17 % emulsifiers, per acre or a non-ionic 
+surfactant at .25% v/v surfactant to water — (1 quart per 100 gallons of 
+water) per acre.
+Wild onions and garlic
+RESTRICTIONS AND LIMITATIONS FOR FALLOW GROUND (crop stubble on idle land, or postharvest to crops, or 
+between crops;
+• Plant only labeled crops within 29 days following application.
+• Limited to 2 applications per year.
+• Maximuim of 2.8 pts. (2 lbs. ae) per acre per application.
+• Minimum of 30 days between applications.
+PLANTING IN TREATED AREAS;
+Labeled Crops: Within 29 days after an application of this product, plant only those crops listed on this or other registered
+2,4-D labels. Follow more specific limitations, if any, provided in directions for specific crops. Labeled crops may be at risk 
+of crop injury or loss if planted soon after application, especially during the first 14 days. Degradation factors described 
+below should be considered in weighing this risk.
+Other Crops: All other crops may be planted 30 or more days after application without concern for illegal residues in the 
+planted crop. However, under certain conditions, there may be a risk of injury to susceptible crops. Degradation factors 
+described below should be considered in weighing this risk. Under normal conditions, any crop may be planted without risk 
+of injury if at least 90 days of soil temperatures above freezing have elapsed since application.
+Degradation Factors: When planting into treated areas, the risk of crop injury is less if lower rates of product were applied 
+and conditions following application have included warm, moist soil conditions that favor rapid breakdown of 2,4-D. Risk is 
+greater if higher rates of product were applied and soil temperatures have been cold and/or soils have been excessively wet 
+or dry in the days following application. Consult your local agricultural extension service for information about susceptible 
+crops and typical conditions in your area.
+Precautions for Planting Cotton: Following application of this product and following a minimum of 1” rainfall or irrigation in 
+a 24 hr. period, wait an interval of 30 days prior to planting cotton. Failure to observe these precautions may result in crop 
+injury.
+RATE PER ACRE
+2/3 to 1-2/3 pints
+RATE PER ACRE
+1-1/2 to 2-3/4 pints
+FALLOW GROUND (crop stubble on idle land 
+WEEDS
+Annual broadleaf weeds
+WEEDS
+Annual broadleaf 
+weeds and * perennial 
+weeds
+
+2-3/4 pints** Sand shinnery oak
+Alder
+4 to 5-1/3 pints
+2 to 4 pints
+0.7 ml per injection
+Alder, cascara, cherry,4 pints
+Oaks, hickory, maple, 
+pecan, elm, sumac, 
+sweetgum, hawthorn, 
+and other hardwoods
+PASTURES AND RANGELAND (established grass pastures, rangeland, and perennial grasslands not in agricultural 
+production, excluding Conservation Reserve areas)___________________________________________________
+For susceptible annual and biennial broadleaf weeds; Do not apply more than 1.4 pts (1 lb. ae) per acre per application. 
+For moderately susceptible biennial and perennial broadleaf weeds and difficult to control weeds and woody plants; Do not 
+apply more than 2.8 pts (2 lbs. ae) per acre per application.
+For spot treatment; Do not apply more than 2.8 pts (2 lbs. ae) per acre.
+RESTRICTIONS AND LIMITATIONS FOR PASTURES AND RANGELAND;
+• Do not cut forage for hay within 7 days of application.
+• Maximum of two applications per year.
+• Do not apply more than 4 lbs. ae/acre per year.
+• The minimum retreatment interval is 30 days.
+Ceanothus spp., 
+chinquapin, madrone 
+manzanita, oak, 
+tanoak and other 
+susceptible brush 
+species
+Alder, aspen, birch, 
+hazel, willow and other 
+competing hardwood 
+species
+DIRECTIONS
+Conifer Release; Apply as a foliage spray in 8 to 25 gallons of water. Treat 
+when % of the brush foliage has attained full size leaves and before new 
+conifer growth reaches 2” in length. This is usually between early May and 
+mid-June. Adjust treatment date depending on stage of growth and brush 
+species. This may cause leader deformation on exposed firs, but they 
+should overcome this during the second year after spraying.
+Conifer Release; To control susceptible brush species and to release 
+Douglas fir, hemlock, sitka spruce or grand fir, apply up to 2 qts. per acre 
+before new growth on Douglas fir is 2” long. To control manzanita and 
+ceanothus in ponderosa pine, apply 2 to 2-2/3 qts. per acre before pine 
+growth begins in spring. To increase performance, add 2 to 4 qts. of diesel, 
+fuel oil, kerosene, or a suitable approved agricultural surfactant at 
+recommended label rate.
+Apply as a foliage spray in 8 to 25 gallons water after northern conifers, 
+jack pine, red pine, black spruce, and white spruce cease growth and 
+“harden off” (usually in mid-July). Since this treatment may cause 
+occasional conifer injury, do not use if such injury cannot be tolerated. 
+Consult your regional or extension forester or state herbicide specialist for 
+recommendations to fit local conditions.
+Tree Injections (pine release); Apply undiluted product in a concentrate tree 
+injector calibrated to apply 0.7 ml per injection. Space injections 2” apart, 
+edge to edge, completely around the tree and close to the base. The 
+injector bit must penetrate the inner bark. On hard-to-kill species such as 
+hickory, dogwood, red maple, blue beech and ash, make injections 1-1/2” 
+apart, edge to edge. Treatment may be made at any time of the year. For 
+best results, injections should be made during growing season. May 15- 
+October15. For dilute injections, mix 2/3 gal. of product in 19 gals, of water. 
+Dormant Application (other than pine); Apply up to 2 qts. per acre in
+10
+Apply in 5 gallons of oil or 4 gallons of water plus 1 gallon of oil or 1-2 
+quarts of a crop oil concentrate with at least 17 % emulsifiers, per acre or a 
+non-ionic surfactant at .25% v/v surfactant to water - (1 quart per 100 
+gallons of water) per acre.
+• Deep-rooted perennial weeds may require the higher rate or repeated treatments. ** Woody plants and any regrowth may 
+require repeat treatments.
+RESTRICTIONS AND LIMITATIONS FOR PASTURES, RANGELAND, AND PROGRAM AREAS;
+• The preharvest interval (PHI) is 7 days (cut forage for hay).
+• Postemergence;
+Limited to 2 applications per year.
+Maximum of 2.8 pts (2 lbs. ae) per acre per application.
+Minimum of 30 days between applications.
+If grass is to be cut for hay. Agricultural Use Requirements for the Worker Protection Standard are applicable. 
+For program lands, such as Conservation Reserve Program, consult program rules to determine whether grass or hay 
+may be used. The more restrictive requirements of the program rules or this label must be followed.
+USES IN FOREST MANAGEMENT 
+WEEDS RATE PER ACRE
+1-1/3 to 4 pints
+
+2-2/3 pints
+1-1/3 to 4 pints
+2-1/3 to 5-1/3 pints
+2-1/3 to 5-1/3 pints
+2/3 to 1-1/3 pints
+WEEDS DIRECTIONS
+Annual broadleaf weeds Apply when weeds are young and growing vigorously.
+5-1/3 pints
+Perennial and biennial 
+broadleaf weeds
+___________________________________________________________11____________ 
+sufficient diesel, fuel oil or kerosene for good coverage. Application may be 
+made by ground or air and should be made before conifer bud break.
+NON-CROP AREAS - Fence Rows, Hedgerows, Roadsides, Ditches, Rights-of-Way, Airfields, Railroad, Highway and Utility 
+Rights-of-Way, Industrial Sites, and Other Non-Crop Areas.
+Spot Treatment: To control broadleaf weeds or brush in non-cropland areas, apply 4 fl. oz. in 3 gallons of water, mixing 
+thoroughly, and spray to run-off. This high dosage rate may only be used where injury can be tolerated.
+False dandelion, 
+klamath weed, plan­
+tain, tansy ragwort, 
+and other over-winter­
+ing susceptible weeds 
+Alder
+Tansy ragwort and musk thistle 
+Wild onion and wild garlic 
+Woody plants - Ground
+2 to 2-2/3 pints Spray perennial weeds when near the bud stage, but not flowering. Do 
+not use on St. Augustine grass. Bentgrass, clover, legumes and 
+dichondra may be injured. Do not apply to newly seeded areas until grass 
+is well established. Deep-rooted perennials may require repeated 
+treatments.
+Apply in rosette stage before bolting.
+Treat in the early spring and fall when young and actively growing.
+Apply in 20 to 100 gallons of water. For increased effectiveness, add a
+poplar, serviceberry 
+and other susceptible 
+deciduous brush 
+species
+Broadleaf weeds {See 
+“Weed List”)
+Dormant Application (pine only): Make application while pine buds are still 
+dormant. Apply in sufficient water for good coverage by air or ground 
+equipment. Do not use this application unless some pine injury is 
+acceptable. Use of diesel, kerosene, or other oil, or addition of surfactants 
+to spray mix may cause unacceptable pine injury.
+Herbaceous Weed Control: Apply in sufficient water for good coverage. 
+Make application at rates and timing indicated above if pines are present. 
+For control of hazel brush and similar species in the Lake States area, 
+apply 1-1/3 quarts per acre in 8 to 25 gals, of water, when new shoot 
+growth of hazel is complete (usually mid-July).
+Site Preparation (as dormant spray); Prior to planting seedlings, apply in 
+diesel, fuel oil, or similar oil before foliage is Vi full size. Application maybe 
+made by air or ground.
+Site Preparation (as foliage spray); Prior to planting seedlings, apply in 8 to 
+25 gals, of water after most alder leaves are full size. To increase 
+penetration, 2 to 4 qts. per acre of diesel, fuel oil, kerosene or a suitable 
+approved agricultural surfactant at recommended label rates may be added 
+to the spray mixture.
+ChristmasTree Plantations; In Douglas fir Christmas trees, apply over the 
+top by ground or aerial application equipment only when the trees are 
+dormant, prior to bud break. Do not spray over the top of pine or true firs 
+{Abies spp.). Directed sprays may be made to weeds in Christmas tree 
+plantations of all conifer species, but the spray must not contact tree foliage 
+as injury may occur. Do not apply to weakened, diseased, or stressed 
+seedlings since unacceptable injury may occur. This product may be mixed 
+with atrazine for Christmas tree application. Read and follow the atrazine 
+label used for precautionary statements, directions for use, geographic and 
+other restrictions.
+RESTRICTIONS AND LIMITATIONS FOR USES IN FOREST MANAGEMENT:
+• Broadcast application:
+Limited to one broadcast application per year.
+Maximum of 5.7 pints (4 lbs. ae) per acre per broadcast application.
+• Injection:
+Limited to one injection application per year.
+Maximum of 1-1/3 ml of 6 lbs. ae formulation per injection site.
+RATE PER 
+ACRE
+1-1/3 to 2-2/3 
+pints
+
+application
+TURF GROWN FOR SEED OR SOD (DO NOT USE IN CALIFORNIA)
+1-1/3 to 2 pints*
+1-1/3 pints
+Biennial and perennial 
+weeds
+WARRANTY DISCLAIMER
+The directions for use of this product must be followed carefully. TO THE EXTENT CONSISTENT WITH APPLICABLE 
+LAW, (1) THE GOODS DELIVERED TO YOU ARE FURNISHED “AS IS” BY MANUFACTURER OR SELLER AND (2) 
+MANUFACTURER AND SELLER MAKE NO WARRANTIES, GUARANTEES, OR REPRESENTATIONS OF ANY KIND 
+TO BUYER OR USER, EITHER EXPRESS OR IMPLIED, OR BY USAGE OF TRADE, STATUTORY OR OTHERWISE, 
+WITH REGARD TO THE PRODUCT SOLD, INCLUDING, BUT NOT LIMITED TO MERCHANTABILITY, FITNESS FOR 
+A PARTICULAR PURPOSE, USE, OR ELIGIBILITY OF THE PRODUCT FOR ANY PARTICULAR TRADE USAGE. 
+UNINTENDED CONSEQUENCES, INCLUDING BUT NOT LIMITED TO INEFFECTIVENESS, MAY RESULT BECAUSE 
+OF SUCH FACTORS AS THE PRESENCE OR ABSENCE OF OTHER MATERIALS USED IN COMBINATION WITH
+THE GOODS, OR THE MANNER OF USE OR APPLICATION, INCLUDING WEATHER, ALL OF WHICH ARE BEYOND 
+THE CONTROL OF MANUFACTURER OR SELLER AND ASSUMED BY BUYER OR USER. THIS WRITING
+CONTAINS ALL OF THE REPRESENTATIONS AND AGREEMENTS BETWEEN BUYER, MANUFACTURER AND
+_________________________________________________________12____________ 
+crop oil concentrate with at least 17 % emulsifiers at 1 -2 quarts per acre 
+or a non-ionic surfactant at .25% v/v surfactant to water -1 quart per 100 
+gallons of water. Spray volumes of up to 500 gallons per acre may be 
+needed for control if brush is dense.
+For solid stands of susceptible brush, apply in 3 to 12 gallons volume per 
+acre. 2 to 4 quarts of fuel oil may be included in this mixture.
+Woody plants - Aerial
+application
+RESTRICTIONS AND LIMITATIONS FOR NON-CROP AREAS;
+• Postemergence (annual and perennial weeds);
+Limited to 2 applications per year.
+Maximum of 2.85 pts. (2 lbs. ae) per acre per application.
+• Minimum of 30 days between applications.
+• Postemergence (woody plants);
+Limited to 1 application per year.
+Maximum of 5.7 pts. (4 lbs. ae) per acre per year.
+• Application to non-cropland areas are not applicable to treatment of commercial timber or other plants being grown for 
+sale or other commercial use, or for commercial seed production, or for research purposes.
+DIRECTIONS
+Apply to established stands before the seed head comes into the 
+boot stage. Do not spray in boot stage of growth. For seedling 
+grasses, apply in the spring after grass has tillered or has at least 5 
+leaves, but before the boot stage.
+Perennial and biennial
+weeds
+• Use only the low rate on seedling grasses.
+RESTRICTIONS AND LIMITATIONS FOR TURF GROWN FOR SEED OR SOD;
+• Limited to 2 applications per year.
+• Maximum of 2.85 pts. (2 lbs. ae) per acre per application.
+• Minimum of 21 days between applications.
+1-1/3 to 2-1/8 
+pints *
+RATE PER ACRE
+2/3 to 1 pint *
+DIRECTIONS
+The maximum number of broadcast applications per treatment site is 2 
+per year. Do not apply to newly seeded areas until grass is well 
+established. Where bentgrass predominates, make 2 applications of a 2/3 
+pint per acre at 3 week intervals. Do not use on susceptible southern 
+grasses such as St. Augustine, bentgrass and dichondra.
+• Deep-rooted perennials may require repeat applications. Clovers and legumes may be injured by this treatment. 
+RESTRICTIONS AND LIMITATIONS FOR TURF, ORNAMENTAL (golf courses, parks cemeteries, sports fields, turf grass, 
+and other lawn and grass areas);
+• Postemergence;
+• Limited to 2 applications per year.
+• Maximum of 2.14 pts. (1.5 lbs. ae) per acre per application.
+• The maximum seasonal rate is 4.28 pints (3 lbs, ae) per acre, excluding spot treatments.
+2-2/3 to 5-1/3 
+pints
+TURF, ORNAMENTAL (golf courses, parks, cemeteries, sports fields, turf grass, and other lawn and grass areas) 
+I RATE PER ACRE I
+WEEDS
+Annual broadleaf weeds
+WEEDS
+Annual broadleaf weeds
+
+{Shredder® is a registered trademark of Winfield Solutions, LLC.J
+13
+SELLER, AND NO PERSON OR AGENT OF MANUFACTURER OR SELLER HAS ANY AUTHORITY TO MAKE ANY 
+REPRESENTATION OR WARRANTY OR AGREEMENT RELATING IN ANY WAY TO THESE GOODS.
+LIMITATION OF LIABILITY
+TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, IN NO EVENT SHALL MANUFACTURER OR SELLER BE 
+LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, OR FOR DAMAGES IN THE NATURE OF 
+PENALTIES RELATING TO THE GOODS SOLD, INCLUDING USE, APPLICATION, HANDLING, AND DISPOSAL. 
+MANUFACTURER OR SELLER SHALL NOT BE LIABLE TO BUYER OR USER BY WAY OF INDEMNIFICATION TO 
+BUYER OR TO CUSTOMERS OF BUYER, IF ANY, OR FOR ANY DAMAGES OR SUMS OF MONEY, CLAIMS OR 
+DEMANDS WHATSOEVER, RESULTING FROM OR BY REASON OF, OR RISING OUT OF THE MISUSE, OR 
+FAILURE TO FOLLOW LABEL WARNINGS OR INSTRUCTIONS FOR USE, OF THE GOODS SOLD BY 
+MANUFACTURER OR SELLER TO BUYER. ALL SUCH RISKS SHALL BE ASSUMED BY THE BUYER, USER, OR 
+ITS’ CUSTOMERS, BUYER’S OR USER’S EXCLUSIVE REMEDY, AND MANUFACTURER ’S OR SELLER ’S TOTAL 
+LIABILITY SHALL BE FOR DAMAGES NOT EXCEEDING THE COST OF THE PRODUCT.
+If you do not agree with or do not accept any of directions for use, the warranty disclaimers, or limitations on liability, do 
+not use the product, and return it unopened to the Seller, and the purchase price will be refunded.