docker: production image + Gitea Actions for monthly refresh
Image rebuild (skip scrape) / build (push) Failing after 1h37m12s
Image rebuild (skip scrape) / build (push) Failing after 1h37m12s
Dockerfile: self-contained image with corpus + Chroma + BM25 baked in. Drawbar's compose pulls + runs without volume mounts. Built from sources.json (labels schema), PRODUCT_NAME=crop_chem by default, HYBRID_SEARCH=true (always-on for production quality). RERANK_URL + OLLAMA_URL get set at compose time. .gitea/workflows/refresh.yml: monthly cron (1st @ 06:00 UTC) does full scrape → reindex → image push. Scrapes Bayer (~30 min) + EPA PPLS row-crop filtered (~7h). Skips reindex+push if no corpus diff. Tags pushed: :latest, :<sha12>, :corpus-<YYYY.MM.DD>. .gitea/workflows/image-only.yml: on-demand or auto on code-only pushes to main (paths: docs_mcp/, rag/, scrape/, requirements.txt, Dockerfile, sources.json). Reindexes from committed corpus, builds image, pushes. ~10 min vs ~9h full refresh. .gitignore: corpus/ now COMMITTED (4,159 labels, 265 MB of .md + sidecars). Lets image-only.yml rebuild indexes without re-scraping. chroma/ + bm25/ still gitignored (regenerable binary indexes). .dockerignore: drops venv, eval results, PLAN/README/CLAUDE.md, deploy/, .git/ — keeps the image lean. corpus + chroma + bm25 explicitly NOT in dockerignore (those go INTO the image). Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
This commit is contained in:
@@ -0,0 +1,765 @@
|
||||
# ETI 114 02 H
|
||||
|
||||
- EPA Reg No: **228-677**
|
||||
- Registrant: NUFARM AMERICAS, INC.
|
||||
- Signal word: Warning
|
||||
- Active ingredients: Nicosulfuron (4.2%)
|
||||
- Label accepted: 2008-07-21
|
||||
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/079676-00077-20080721.pdf
|
||||
|
||||
---
|
||||
o 7 /~ 1/ ()c)()8
|
||||
U.S. ENVIRONMENTAL PROTECTION AGENCY
|
||||
Office of Pesticide Programs
|
||||
Registration Division (7S0SC)
|
||||
1200 Pennsylvania Ave., N.W.
|
||||
Washington, D.C. 20460
|
||||
NOTICE OF PESTICIDE:
|
||||
....x. Registration
|
||||
(under FIFRA, as amended)
|
||||
_ Reregistration
|
||||
Name and Address of Registrant (include ZIP Code):
|
||||
Etriga
|
||||
C/O Pyxis Regulatory Consulting. Inc
|
||||
4110 136th Street, NW
|
||||
Gig Harbor, 98332
|
||||
EPA Reg. Number: Date of Issuance:
|
||||
79676-77 JUL 21 2008
|
||||
Term of Issuance:
|
||||
Conditional
|
||||
Name of Pesticide Product:
|
||||
ETl114 02 H
|
||||
On the basis of information furnished by the registrant, the above named pesticide is hereby registered/reregistered under the Federal Insecticide, Fungicide
|
||||
and Rodenticide Act.
|
||||
Registration is in no way to be construed as an endorsement or recommendation of this product by the Agency. In order to protect health and the
|
||||
environment, the Administrator, on his motion, may at any time suspend or cancel the registration of a pesticide in accordance with the Act. The acceptance
|
||||
of any name in connection with the registration of a product under this Act is not to be construed as giving the registrant a right to exclusive use of the name
|
||||
or to its use if it has been covered by others.
|
||||
This product is conditionally registered in accordance with FIFRA section 3( c )(7)(A) provided that
|
||||
you:
|
||||
1. Submit the results of the one-year storage stability (830.6317) and corrosion characteristics
|
||||
(830.6320) studies once they are available. .
|
||||
2. Submit and/or cite all data required for registration/reregistration of your product when the Agency
|
||||
requires all registrants of similar products to submit such data.
|
||||
3. Make the labeling changes listed below before you release the product for shipment:
|
||||
a. Add the phrase "EPA Registration No. 79676-77"
|
||||
Il
|
||||
signfur of Approvin
|
||||
J
|
||||
lcial:
|
||||
(~
|
||||
J a;n'il A. T i, Product Manager (25)
|
||||
,I'lerl/tcide Branch, Registration Division (7505P)
|
||||
ryorm857o-6
|
||||
Date:
|
||||
|
||||
(
|
||||
Page 2
|
||||
EPA Reg. No. 79676-77
|
||||
b. Remove the statement "Wash thoroughly with soap and water after handling after handling and before
|
||||
eating, drinking, chewing gum, or using tobacco" from the Precautionary Statements, Hazards to
|
||||
Humans and Animals. Similar statements appear in the User Safety Recommendations.
|
||||
c. On page 3, under "Rate", revise the last sentence in the second paragraph to read "For more
|
||||
information, refer to Table 2, under "ADDITIONAL INSTRUCTIONS."
|
||||
d. On page 6, revise the heading "Additional RecommendationslRecommendations for Specific Weed
|
||||
Problems", to read "Additional Instructions/Instructions for Specific Weed Problems."
|
||||
e. On page 7, revise the three bullets under the fourth paragraph to read as follows:
|
||||
.;Do not tank-mix ETI 11402 H with Basagran and Laddok or severe crop injury may occur.
|
||||
-Do not tank-mix ETI 11402 H with products containing 2,.4-D as severe grass control antagonism may
|
||||
occur.-
|
||||
-Do not tank-mix E:TI 11402 H with foliar-applied organophosate insecticides (e.g. Lorsban, malathion,
|
||||
parathion, etc) as severe crop injury may occur.-
|
||||
3. Submit one (1) copy of your final printed labeling before you release the product for shipment.
|
||||
If these conditions are not complied with, the registration will be subject to cancellation in accordance
|
||||
with FIFRA section 6 ( e). Your release for shipment of the product constitutes acceptance of these
|
||||
conditions.
|
||||
A stamped copy oflabeling in enclosed for your records.
|
||||
Enclosures
|
||||
|
||||
( (
|
||||
ETI114 02 H
|
||||
A soluble concentrate for use on corn
|
||||
ACCRlfVl'ED
|
||||
ACTIVE INGREDIENT: w~th COMME~n's .
|
||||
. Kill EPA Letter' D.at~Y Weight
|
||||
Nicosulfuron
|
||||
2-[[(4,6-dimethoxypyrimidin-2-yl)aminocarbonyl]aminosulfonyl]- JUL 2 1 2008
|
||||
N,N-dimethyl-3-pyridinecarboxamide ... · ......................................... ;Ullide-l'.~he·~e;roH~~fw~·····.4·2%
|
||||
OTHER INGREDIENTS: ................................................................ iF~eDl!e,.IU'..d.~~tllr&;§.e-AIB~ .... 95.8%
|
||||
TOTAL: ............................................................................................ ~ .. ~~~~A:'.~.l'Mt;§~ .. 1 00.0%
|
||||
ETI 11402 H contains 0.33 Ibs. of active ingredient per gallon. reg!8jU] (0- TzA ~ N.::
|
||||
KEEP OUT OF REACH OF CHILDREN
|
||||
CAUTION
|
||||
Si usted no entiendela etiqueta, busque a alguien para que se la explique a usted en detalle.
|
||||
(If you do not understand this label, find someone to explain it to you in detail.)
|
||||
FIRST AID
|
||||
If on skin or • Take off contaminated clothing.
|
||||
clothing: • Rinse skin immediately with plenty of water for 15-20 minutes.
|
||||
• Call a poison control center or doctor for treatment advice.
|
||||
HOT LINE NUMBER
|
||||
Have the product container or label with you when calling a poison control center or doctor, or going for treatment.
|
||||
You may also contact 1-800-424-9300 for emergency medical treatment information.
|
||||
PRECAUTIONARY STATEMENTS
|
||||
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
|
||||
CAUTION
|
||||
Avoid contact with skin or clothing. Wash thoroughly with soap and water after handling and before
|
||||
eating, drinking, chewing gum, or using tobacco. Prolonged or frequently repeated skin contact may
|
||||
cause allergic reactions in some individuals. -
|
||||
PERSONAL PROTECTIVE EQUIPMENT (PPE)
|
||||
Some materials that are chemical resistant to this product are listed below. If you want more options
|
||||
follow the instructions for Category A on the EPA chemical-resistance category selection chart.
|
||||
Applicators and other handlers must wear:
|
||||
• Long-sleeved shirt and long pants
|
||||
• Chemical-resistant gloves Category A (such as butyl rubber, natural rubber, neoprene rubber, or
|
||||
nitrile rubber), all ~ 14 mils
|
||||
• Shoes plus socks ,
|
||||
L <. ( I.- [
|
||||
Follow manufacturer's instruction for cleaning/maintaining PPE. If no such instruct1-:::~s fer wa&hables
|
||||
exist, use detergent and hot water. Keep and wash PPE separately from other laundry., '. :
|
||||
EPA Reg. No. 79676-
|
||||
Manufactured for:
|
||||
Etigra®
|
||||
501 Cascade Pointe Lane, Suite 103
|
||||
Cary, NC 27513
|
||||
www.etigra.com
|
||||
\ r ' l <. I l t 1 r \
|
||||
EPA~€st~ No. l
|
||||
, ,
|
||||
~----------------------------~~{",
|
||||
ETI 114 02 H contains nicosuHI,l"uhi the'
|
||||
active ingredient used in Accent®.: {'
|
||||
Net Contents:
|
||||
, , ,
|
||||
|
||||
( (
|
||||
USER SAFETY RECOMMENDATIONS
|
||||
Users should:
|
||||
• ' Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet.
|
||||
• Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean
|
||||
clothing.
|
||||
ENVIRONMENTAL HAZARDS
|
||||
Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the
|
||||
mean high water mark. Do not contaminate water when disposing of equipment rinsewater. Do not apply
|
||||
where/when conditions could favor runoff.
|
||||
DIRECTIONS FOR USE
|
||||
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Do not apply
|
||||
this product in a way that will contact workers or other persons, either directly or through drift. Only
|
||||
protected handlers may be in the area during application. For any requirements specific to your State or
|
||||
Tribe, consult the agency responsible for pesticide regulation. Read the entire label before using this
|
||||
product.
|
||||
AGRICULTURAL USE REQUIREMENTS
|
||||
Use this product only in accordance with its labeling and with the Worker Protection Standard 40 CFR
|
||||
Part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests,
|
||||
nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training,
|
||||
decontamination, notification, and emergency assistance. It also contains specific instructions and
|
||||
exceptions pertaining to the statements on this label about personal protective equipment (PPE), and
|
||||
restricted-entry intervals. The reiquirements in this box only apply to uses of this product that are covered
|
||||
by the Worker Protection Standard.
|
||||
Do not enter or allow worker entry into treated areas during the restricted-entry interval.(REI) of 4 hours.
|
||||
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and
|
||||
that involves contact with anything that has been treated, such as plants, soil, or water, is: '
|
||||
• Coveralls
|
||||
• Chemical-resistant gloves Category A (such as butyl rubber, natural rubber, neoprene rubber, or
|
||||
nitrile rubber), all ~ 14 mils
|
||||
• Shoes plus socks
|
||||
ETI 11402 H should be used only in accordance with directions on this label or in supplemental Etigra
|
||||
publications. Etigra will not be responsible for losses or damage resulting from use of this product in any
|
||||
manner not speCifically approved by Etigra.
|
||||
GENERAL INFORMATION
|
||||
ETI 114 02 H is a suspension concentrate used at a rate of 6-24 fluid ounces per acre for selective
|
||||
postemergence grass weed control in field corn grown for seed or grain, popcorn and sweet corn.
|
||||
Do not make more than two applications of ETI 114 02 H per cropping season. The combined dosage of
|
||||
sequential applications cannot exceed 24 fluid ounces per acre of ETI 11402 H.
|
||||
WHEN TO APPLY - NORMAL PLANNED USE
|
||||
Research indicates best results are obtained when applications are made early postemergence when
|
||||
corn and weeds are small. Target applications to corn that is less than 12" tall for best overall
|
||||
performance. ETI 11402 H may be broadcast to corn that is either up to. 20" tall (free standing) or that is
|
||||
exhibiting up to and including 6 leaf collars (V6), whichever is more restrictive.
|
||||
TIMING TO WEEDS
|
||||
ETI114 02 H should be applied when grasses are young and actively growing but before they exceed the
|
||||
sizes indicated in Table 1. Heavy infestations of weeds should be treated before they become too
|
||||
competitive with the crop, especially when fertility and / or soil moisture are limited. A'second application
|
||||
or a timely cultivation is required for later-emerging weeds. Unsatisfactory control may result if
|
||||
applications are made to weeds under stress or to weeds larger than the size indicated in this label.
|
||||
Refer to the LATE OR RESCUE APPLICATIONS section for more information.
|
||||
2
|
||||
|
||||
( (
|
||||
LATE OR RESCUE APPLICATIONS
|
||||
ETI 114 02 H may be applied as a rescue treatment for the control of escaped grasses in field corn, or as
|
||||
a directed postemergence application on corn that has more than 6 collars or that is taller than 20"
|
||||
(whichever occurs first).
|
||||
• For corn that is 20" - 36" tall: Apply ETI 114 02 H using drop nozzles ONLY and avoid spraying
|
||||
into the whorl of cornstalks.
|
||||
• Do NOT apply to crop that is taller than 36" or that exhibits 10 or more collars (V10), whichever is
|
||||
most restrictive.
|
||||
Control for applications made to weeds larger than those listed on this label may vary from suppression to
|
||||
complete control with the level of control depending on the weed species, stage of growth, and
|
||||
environmental conditions.
|
||||
Because rescue applications are typically unplanned, choices must be made between the risks that arise
|
||||
from applications made outside of the optimal timeframe for ETI. 114 02 H use and the effects of harvest
|
||||
complications and lor season long grass competition. The risks from improperly timed ETI 11402 H use
|
||||
that should be considered include, but are not limited to:
|
||||
Yield Loss Due to Competition: Research indicates that corn yields may be reduced by competition from
|
||||
foxtail exceeding 4 inches in height. The risk of yield losses due to prolonged competition with the crop
|
||||
even though control may be acceptable may increase if applications are made to foxtail and other annual
|
||||
grasses that exceed the size stated on the label.
|
||||
Incomplete Control of Grasses Beyond Labeled Size: Reduced corn yield may result when applications
|
||||
are made to grasses that exceed the labeled sizes due to reduced control of the grasses.
|
||||
Incomplete Grass Control Due To Herbicide· Stress: Reduced control of grasses under stress from
|
||||
previous herbicide applications may result due to the stressed grasses not be actively growing, therefore
|
||||
reducing susceptibility to ETI 114 02 H in rescue situations.
|
||||
Ear Malformation: The potential for ear malformation (pinching) increases when ETI 114 02 H is applied
|
||||
to corn that has 7 to 10 collars (V7 to V10). This risk may be greatly reduced, but not eliminated, by using
|
||||
drop nozzles properly adjusted so as to not apply ETI 11402 H into the corn whorl.
|
||||
RATE
|
||||
For weeds in the size ranges listed below, optimum control is obtained using 12 fluid ounces of ETI 114
|
||||
02 H per acre. Weeds exceeding the listed by up to 50% may be partially controlled with rates between
|
||||
12 and 24 fluid ounces of ETI 11402 H per acre.
|
||||
For limited control of certain small grass weeds, ETI 114 02 H may be applied at rates of 6-12 fluid
|
||||
ounces. For more information, refer to Table 2 under ADDITIONAL RECOMMEDATIONS.
|
||||
Due to drought or other environmental factors, grassy weeds may not reach the sizes listed below as they
|
||||
mature (more than 3 tillers). Because weed sensitivity to ETI 114 02 H decreases as weeds mature,
|
||||
stressed weeds that are maturing rapidly should be treated before they reach the stages listed below.
|
||||
When applied as directed, 12 fluid ounces of ETI114 02 H per acre will control the following weeds:
|
||||
Table 1. Weeds controlled with 12 fluid ounces ETI114 02 H
|
||||
Maximum Height or
|
||||
Grasses Diameter
|
||||
(Inches)
|
||||
Barnyardgrass 4
|
||||
Broadleaf signalgrass 2
|
||||
FoxtailsJbristly, giant, green, yellow) 4
|
||||
Itchgrass 6
|
||||
Johnsongrass
|
||||
Seedling 12
|
||||
Rhizome 18
|
||||
Panicum (Texas, Browntop) 3
|
||||
Fall 4
|
||||
3
|
||||
|
||||
(
|
||||
Maximum Height or
|
||||
Grasses Diameter
|
||||
(Inches)
|
||||
Quackgrass T 10
|
||||
Ryegrass (Italian, perennial) 6
|
||||
Sandbur (field, longspine) T 3
|
||||
Shattercane 12
|
||||
Sorghum almum 12
|
||||
Timothy 6
|
||||
Volunteer cereals (barley, oats, rye, 6+
|
||||
triticale, wheat) "
|
||||
Wild Oats 4
|
||||
Wild proso millet 4
|
||||
Wirestem muhlyT 8
|
||||
Witchgrass 6
|
||||
Woolly Cupgrass T 4
|
||||
t Requires the use of the COC plus ammonium nitrogen fertilizer. Cultivation or re-treatment may be
|
||||
required. Refer to "FOR ADDITIONAL CONTROL OF LATER EMERGING GRASSES."
|
||||
:I: 10" in WA, OR, ID, and MT where the use of MSO adjuvants are preferred. See SPRAY ADJUVANTS.
|
||||
Maximum Height or
|
||||
Broadleaves Diameter
|
||||
(Inches)
|
||||
Burcucumber 3"
|
||||
Dandelion 6"
|
||||
Hemp dogbane 4"
|
||||
Jimsonweed 3"
|
||||
Morningglory (Ivyleaf, pitted) 3"
|
||||
tall 2"
|
||||
Pigweed (redroot, smooth) 4"
|
||||
PokeweedT 4"
|
||||
Smartweeds (Iadysthumb, PA) 4"
|
||||
Thistle, Canada T 4"
|
||||
t Suppression only
|
||||
Popcorn, Field Corn Grown for Seed and Sweet Com
|
||||
ETI 114 02 H may be applied to field corn grown for seed or popcorn that exhibits up to and including 5
|
||||
leaf-COllars (V5) or that is less than 20" tall (free-standing), whichever is most restrictive. Do NOT apply to
|
||||
corn that exhibits more than 5 leaf-collars (V5) or that is taller than 20" (whichever is more restrictive).
|
||||
Make either a broadcast application"or apply with drop nozzles.
|
||||
ETI 114 02 H has been tested on seed corn inbreds or yellow popcorn hybrids for sensitivity by many
|
||||
seed companies and excellent safety has been reported. Unless specifically approved by the seed
|
||||
company, do NOT apply ETI 114 02 H to any white popcorn inbred or white popcorn hybrid (including
|
||||
"White Dynamite" popcorn). "
|
||||
A single application (per year) of ETI 114 02 H may be applied to certain sweet corn hybrids grown for
|
||||
fresh markets or under contract for processing. Apply broadcast or with drop nozzles (post~directed) on
|
||||
sweet corn up to 12 inches tall or up to and including 5 leaf-collars (V5). For sweet corn 12-18 inches tall,
|
||||
apply using drop nozzles only. Do NOT apply to sweet corn taller than 18 inches or that has 6 or more
|
||||
leaf-collars (V6).
|
||||
Because not all sweet corn hybrids have been tested for crop tolerance and hybrid sensitivity to ETI 114
|
||||
02 H is highly variable, contact your Etigra Sales Representative for information on local sweet corn
|
||||
hybrids that have been evaluated with ETI 11402 H.
|
||||
Additionally, because not all seed corn inbreds, popcorn or sweet corn hybrids have been tested, nor
|
||||
does Etigra have access to all seed company data, Etigra is not responsible for any crop injury ariSing
|
||||
from the use of ETI114 02 H on field corn grown for seed, popcorn or sweet corn.
|
||||
Be sure to check tank mix partner label(s) for tolerances and instructions for use when tank mixing.
|
||||
4
|
||||
|
||||
( (
|
||||
When applying ETI 11402 H to popcorn, sweet corn or field corn grown for seed that has been previously
|
||||
treated with a soil insecticide, be sure to refer to the SOIL INSECTICIDE INTERACTION INFORMATION
|
||||
section for additional information. ' '
|
||||
Spray Adjuvants
|
||||
ETI 114 02 H contains a proprietary adjuvant system that aids in the control of many difficult weed
|
||||
species. In certain arid climates, the use of additional adjuvants may be required for optimal weed
|
||||
control. In addition~ an ammonium nitrogen fertilizer must be used unless specifically prohibited by tank
|
||||
mix partner labeling. Prior to using other adjuvant systems, consult your local Etigra representative. If
|
||||
another herbicide is tank mixed with ETI 114 02 H, be sure to select adjuvants authorized for use with
|
||||
both products. Products must contain only EPA-exempt ingredients (40 CFR 1001).
|
||||
Crop Oil Concentrate (CO C)- Petroleum or Modified Seed Oil (MSO)
|
||||
• Apply up to 1 % v/v (1 gallon per 100 gallons spray solution) under arid conditions.
|
||||
• If specifically noted on adjuvant product labeling, MSO adjuvants may be used at 0.5% v/v (0.5
|
||||
gallons per 100 gallons spray solution).
|
||||
• A COC adjuvant must contain at least 80% high quality petroleum (mineral) or modified vegetable
|
||||
seed oil with at least 15% surfactant emulsifiers.
|
||||
Nonionic Surfactant (NIS)
|
||||
• Apply up to 0.25% vlv (1 quart per 100 gallons spray solution) under arid conditions.
|
||||
• Use a surfactant with a hydrophilic / lipophilic balance (HLB) greater than 12.
|
||||
Ammonium Nitrogen Fertilizer
|
||||
• Use 2 pounds per acre of a spray-grade ammonium sulfate (AMS) or 2 quarts per acre of high
|
||||
quality urea ammonium nitrate (UAN) such as 2,8%N or 32% N. Under arid conditions, use 4
|
||||
quarts per acre UAN or 4 pounds per ,acre AMS.
|
||||
• Do NOT use liquid nitrogen fertilizer as the total carrier solution.
|
||||
Special Adjuvant Types
|
||||
• Combination adjuvant products may be' used at doses that provide the required amount of NIS,
|
||||
COC, MSO and/or ammonium nitrogen fertilizer. Consult product literature for use rates and
|
||||
restrictions.
|
||||
• Other adjuvant types may be used if they provide the same functionality and have been evaluated
|
||||
and approved by Etigra.
|
||||
MIXING INSTRUCTIONS
|
||||
1. Fill the tank y.. to 1/3 full of water.
|
||||
2. 'Begin agitation and add the labeled amount of ETI 11402 H.
|
||||
3. Continue agitation until the ETI 11402 H is fully dispersed (at least 5 minutes).
|
||||
4. Once fully dispersed, maintain agitation and continue filling the tank with water. As the tank is
|
||||
filling, add the required spray adjuvants (crop oil concentrate; nonionic surfactant, or ammonium
|
||||
nitrogen fertilizer). Before adding any other material (other than spray adjuvants), be sure to
|
||||
thoroughly mix the ETI 11402 H with the water.
|
||||
5. Settling will occur if the mixture is not continuously agitated. Thoroughly re-agitate prior to using if
|
||||
settling occurs.
|
||||
6. To avoid product degradation, apply ETI 114 02 H spray mixture within 24 hours of mixing.
|
||||
NOTE: If ETI 11402 H and a tank mix partner are to be applied in multiple loads, pre-slurry the ETI 114
|
||||
02 H in clean water prior to adding to the tank. This will prevent the tank mix partner from interfering with
|
||||
the dissolution of the ETI 11402 H.
|
||||
WHEN TO APPLY- SEQUENTIAL APPLICATIONS FOLLOWING REDUCED RATES OF
|
||||
PREEMERGENCE HERBICIDES .
|
||||
ETI 114 02 H may be used in a planned postemergence weed control program in corn as a sequential
|
||||
application following a reduced rate of a preemergemce herbicide. Prior to corn emergence, apply a
|
||||
reduced rate of preemergence grass herbicide and then follow with a postemergence application of ETI
|
||||
11402H.
|
||||
,Products such as DuPont CINCH®, CINCH® ATZ, Balance® Pro, Axiom®, Dual® II Magnum, Surpass®,
|
||||
Outlook® and Harness® Xtra may be applied at rates as low as y.. to % of the full labeled use rate,
|
||||
5
|
||||
|
||||
( c
|
||||
followed with a sequential postemergence application of ETI 114 02 H. Prior to applying ETI 114 02 H,
|
||||
refer to the preemergence grass herbicide label for application information, rotational crop guidelines,
|
||||
cautionary statements and use restrictions.
|
||||
NOTE: Do NOT apply ETI 114 02 H to corn injured by previous herbicide applications made to the
|
||||
current or preceding crop.
|
||||
TANK MIX APPLICATIONS - For additional control of broadleaf weeds
|
||||
For additional control of broad leaf weeds, ETI 114 02 H may be tank mixed with full or reduced rates of
|
||||
many herbicides registered for postemergen'ce application in corn. Refer to the tank mix partner label for
|
||||
weeds controlled, adjuvant and crop rotation information, precautions and use restrictions. When tank
|
||||
mixing, be sure to apply the most restrictive language on either label.
|
||||
See Spray Adjuvants section of this label for adjuvant rate recommendation.
|
||||
ADDITIONAL RECOMMENDATIONS I RECOMMENDATIONS FOR SPECIFIC WEED PROBLEMS
|
||||
Reduced Rates of ETI114 02 H
|
||||
For control of the small grass weeds noted in the table below, ETI 11402 H may be applied at a rate of 6-
|
||||
12 fluid ounces. When applying reduced rates of ETI 114 02 H, always use a crop oil concentrate plus
|
||||
ammonium nitrogen fertilizer.
|
||||
Table 2. Weeds Controlled with Reduced Rates of ETI114 02 H
|
||||
Maximum Height or Diameter
|
||||
Ap plication Rate
|
||||
Grasses 6 fl. oz. 9 fl. oz. 12 fl. oz.
|
||||
BarnyardQrass 2" 3" 4"
|
||||
Foxtails (bristly, giant, green) 2" 3" 4"
|
||||
vellow - 2" 4"
|
||||
Itchgrass 2" 4" 6"
|
||||
Johnsongrass, seedling - 8" 12"
|
||||
rhizome - 8" 18"
|
||||
Panicum (Texas, browntop) 1" 2" 3"
|
||||
Fall 1" 2" 4"
|
||||
Sandbur (field, 10nQspine) - 1" 3"
|
||||
Shattercane 3" 6" 12"
|
||||
SorQhum almum 3" 6" 12"
|
||||
Timothy 2" 4" 6"
|
||||
Volunteer cereals - 2" 6"
|
||||
Wild oats' 2" 3" 4"
|
||||
Wild proso millet - 2" 4"
|
||||
Witchgrass 2'" 4" 6"
|
||||
Woollv cUPQrass - - 4"
|
||||
Other Tank Mixtures
|
||||
Other than the exceptions noted, in addition to the tank mix partners and rates indicated above, other
|
||||
products registered for use in field corn may, be tank mixed or sequential applications of full or reduced
|
||||
rates applied following a ETI114 02 H application as long as:
|
||||
• The tank mixture is not specifically prohibited in the label of the tank mix product.
|
||||
• The tank mix product has the same adjuvants, method of application, timing, and use restrictions as
|
||||
ETI114 02 H.
|
||||
• The tank mix combination is compatible as determined by the jar test described in the TANK MIX
|
||||
COMPATIBILITY TESTING section below.
|
||||
NOTE: Weed control and crop response with tank mixtures not appearing' in this label are the
|
||||
responsibility of the user and manufacturer of the tank mix product.
|
||||
Tank Mix Precautions
|
||||
6
|
||||
|
||||
( (
|
||||
Unless the label of either tank mix partner specifies the maximum rate that may be used, do NOT tank
|
||||
mix ETI 11402 H with other products that contain the same active ingredient (nicosulfuron).
|
||||
Do NOT exceed labeled application rates ..
|
||||
A corn plant's predisposition to develop fused tissue emerging fonrn the whorl (rattail) after the V-11 stage
|
||||
may increase if tank mixes or products containing dicamba (e.g., Clarity®, Marksman®) that are applied to
|
||||
small corn under early stressful conditions. Refer to the ENVIRONMENTAL CONDITIONS section for a
|
||||
description of these stressful conditions.
|
||||
To avoid crop injury or antagonism, apply the following products at least seven days prior-to or three days
|
||||
after the application of ETI 114 02 H:
|
||||
• Tank mixes of ETI 114 02 H with Basagran® and Laddok® may result in severe crop injury.
|
||||
• Tank mixing ETI 114 02 H with products containing 2,4-0 may result in severe grass control
|
||||
antagonism.
|
||||
• Tank mixing ETI 114 02 H. with foliar-applied organophosphate insecticides (e.g., Lorsban®,
|
||||
malathion, parathion, etc.) may result in severe crop injury.
|
||||
Tank Mix Compatibility Testing
|
||||
To ensure ETI 11402 H with other tank mix partners, perform the following jar test prior to mixing:
|
||||
1) Mix the tank mix ingredients using theirrelative proportions in a clear glass quart jar with a lid.
|
||||
2) Invert the jar containing the mixture several times and observe the mixture for approximately }S
|
||||
hour.
|
||||
3) If the mixture balls-up, layers, or forms flakes, sludges, gels, oily films or other precipitates, the
|
||||
tank mix combination is not compatible and should not be used.
|
||||
SEQUENTIAL ETI114 02 H APPLICATIONS
|
||||
To control grasses under the following conditions, a sequential application of ETI 114 02 H may be
|
||||
necessary:
|
||||
• Perennial grasses that regrow from underground stems or roots, depending upon environmental
|
||||
conditions.
|
||||
• Regrowth of treated annual grasses due to adverse environmental conditions following applications.
|
||||
• Annual grasses that have more than one flush of emerging seedlings.
|
||||
In a single season, the combined dosage of all sequential applications must not exceed 24 fluid ounces
|
||||
per acre of ETI114 02 H.
|
||||
Cultivation
|
||||
A timely cultivation may be necessary to control suppressed weeds or weeds that emerge after an
|
||||
application of ETI 11402 H. For best results,cultivate 7-14 days after ETI 11402 H is applied or as soon
|
||||
as new weeds are beginning to be established.
|
||||
Environmental Conditions and Biological Activity
|
||||
ETI 11402 H provides best results when applied to young actively growing weeds. For best results, apply
|
||||
during warm, moist conditions (Le., 70°F or more) with adequate soil moisture both before and after
|
||||
application. Weed spectrum and size, spray coverage, growing conditions before and after treatment, soil
|
||||
moisture, and adjuvant selection are all factors that will affect the degree and duration of control.
|
||||
ETI 11402 H is rainfast in 4 hours after application.
|
||||
If weeds that are ·under stress or that exceed the maximum label height are treated, incomplete control
|
||||
may result. Crop injury or poor weed control may result from applications made to plants under stress
|
||||
from:
|
||||
• Carryover from a previous year's herbicide application or prior herbicide applications
|
||||
• Weather that is abnormally cold or hot·
|
||||
• Environmental conditions such as hail damage, drought, water-saturated soils or frost
|
||||
• Injury caused by insects, nematodes, or disease
|
||||
Severe stress from conditions preceding or immediately following application may also result in crop injury
|
||||
or poor weed control. This stress issue affects all weeds, but especially weeds such as woolly cupgrass,
|
||||
green and yellow foxtail arid wild proso millet. .
|
||||
7
|
||||
|
||||
( (
|
||||
When the corn or grass weeds are under stress, delay the application until the stress passes and both
|
||||
weeds and corn resume active growth.
|
||||
Soil Insecticide Interaction Information
|
||||
Crop response varies with insecticide used, insecticide application method, field corn type and soil type.
|
||||
Because ETI 114 02 H may interact with certain insecticides previously applied to the crop, be sure to
|
||||
verify that ETI114 02 H is compatible with any insecticides previously applied prior to use.
|
||||
Do NOT app!}, ETI114 02 H to corn previously treated with Counter® 15G or to corn treated at cultivation
|
||||
with Counter 20CR over the row or in-furrow. .
|
||||
Regardless of soil type, ETI 114 02 H may be ap~lied to corn previously treated with non
|
||||
organophosphate (OP) soil insecticides or Fortress®, Aztec or Force® insecticides.
|
||||
UnacceRtable crop inju~ may occur if applications of ETI 114 02 H to corn previously treated with
|
||||
Counter® 20CR, Lorsban ,or Thimet® may occur, especially on soils of less than 4% organic matter .
|
||||
. Crop Rotation
|
||||
The amount of ETI 114 02 H which may be present in the soil depends on application rate, soil pH and
|
||||
organic matter content, elapsed time since application, crop production practices, and environmental
|
||||
factors. ETI 11402 H disSipates rapidly in warm, acidic, microbiologically active soils.
|
||||
Rotational crops vary in their response to low concentrations of ETI 114 02 H remaining in the soil, and if
|
||||
dry weather prevails between application and rotational crop pianting in cold, high-pH soils, injury to
|
||||
rotational crops may occur. For additional guidelines, consult your local Etigra representative.
|
||||
Because soil pH varies within fields recropping should be based on the highest soil pH within each field.
|
||||
Soil pH should be determined on representative soil samples taken at 0-4" depth by laboratory analysis
|
||||
using the 1:1 soil:water suspension method. For recommended soil sampling procedures, consult local
|
||||
extension publications.
|
||||
When using ETI 11402 H at a maximum rate of 24 fluid ounces, the following rotational intervals should
|
||||
be observed:
|
||||
ETI114 02 H ROTATIONAL CROP GUIDLINE 1 - No Soil pH Restrictions
|
||||
Rotational Crop Rotation Interval_(MonthsJ
|
||||
Alfalfa· 12
|
||||
Cereals, spring (barley, oats, rye, wheat) 8
|
||||
Cereals, winter (barley, oats, rye, wheat) 4
|
||||
Corn (field, sweet) Anytime
|
||||
Corn (pop, sweet)T 10
|
||||
Cotton 10
|
||||
Dry Beans, Peas, Snap Beans 10
|
||||
Red Clover 12
|
||||
Soybeans 0.5 (15 days)
|
||||
Other Crops See Rotational Crop Guidelines 2 and 3
|
||||
t Sweet corn varieties "Merit", Carnival", and "Sweet Success" have a minimum time interval of 15
|
||||
months.
|
||||
:j: The minimum time interval is 10 months for the state of Kansas east of Highway 75, for Minnesota
|
||||
east and south of the Red River Valley and for the states east of the line formed by the western
|
||||
borders of Iowa, Missouri, Arkansas and Louisiana.
|
||||
ETI114 02 H ROTATIONAL CROP GUIDLINE 2 - Soil pH ~ 7.5 restrictions
|
||||
Rotation Interval~Monthsl
|
||||
Rotational Crop pH 7.5 pH> 7.5
|
||||
Sorghum 10 18T
|
||||
Sunflowers 11+ 18
|
||||
All other crops not listed in Rotational See Rotational Guideline 3 Guidelines 1 or 2
|
||||
t Except in Texas and Oklahoma east of Highway 281 where the rotational interval is 10 months,
|
||||
regardless of pH.
|
||||
8
|
||||
|
||||
( (
|
||||
:j: Precipitation following application must exceed 14" prior to planting sunflowers.
|
||||
ETI114 02 H ROTATIONAL CROP GUIDLINE 3 - Soil pH ~ 6.5 restrictions
|
||||
Rotation Interval (Months)
|
||||
Rotational Crop pH 6.5 pH> 6.5
|
||||
Sugarbeets a
|
||||
Potatoes b 10 18t
|
||||
All other crops not listed in Rotational 10 18 Guidelines 1 or 2
|
||||
a) Except on irrigated sites in Colorado, Wyoming, Nebraska, Texas, Michigan and Ohio where
|
||||
precipitation following application must exceed 25" prior to planting beets, where the interval is 10
|
||||
months on soils with pH < 7.5. Sites in Minnesota east and south of the Red River Valley may follow
|
||||
these guidelines provided maximum rates of ETI 114 02 H do not exceed 12 fluid oz.
|
||||
b) In the States of WA, OR, ID or Utah, irrigated potatoes following irrigated corn treated can be planted
|
||||
10 months after using ETI 114 02 H on sprinkler irrigated corn with no soil pH restrictions, providing
|
||||
the maximum use rate on corn does not exceed 18 fluid oz. product per season. Corn treated with ETI
|
||||
114 02 H must be grown to maturity and receive a minimum of 18 inches of irrigation water before
|
||||
potatoes can be planted at this rotation interval. Injury to potatoes may occur if less than 18 inches of
|
||||
irrigation is used on the previous corn crop. ETI 114 02 H may not be used in a tank-mix or sequential
|
||||
application program with other ALS-inhibiting herbicides such as Exceed® or Beacon®.
|
||||
t The cumulative precipitation in the 18 months following application must exceed 28" in order to rotate
|
||||
to sugarbeets or potatoes in North Dakota and northwest Minnesota.
|
||||
ETI114 02 H ROTATIONAL CROP GUIDLINE 4 - For a single 12 fluid oz. application per cropping
|
||||
season.
|
||||
NOTE: Rotational intervals should be extended to 12 months if drought conditions prevail after
|
||||
application and before the rotational crop is planted, unless sprinkler irrigation has been applied and
|
||||
totals greater than 15" during the growing season.
|
||||
Rotational Crop Rotation Interval (Months)
|
||||
AlfalfaT
|
||||
Canola
|
||||
Flax'" 10 Potato
|
||||
Red Clover
|
||||
Sunflower
|
||||
t It is best to use deep fall tillage suc~ as plowing prior to planting alfalfa on sprinkler irrigated fields in
|
||||
Idaho, Utah and northern Nevada. Furrpw irrigated soils may result in less product degradation,
|
||||
causing some crop injury.
|
||||
:j: If drought conditions prevail after application and before the rotational crop is planted, rotational
|
||||
intervals should be extended to 18 months UNLESS sprinkler irrigation has been applied and totals
|
||||
greater than 15" during the growing season.
|
||||
APPLICATION INFORMATION
|
||||
USE PRECAUTIONS
|
||||
• Do NOT apply ETI114 02 H through any type of irrigation system.
|
||||
• All direct or indirect contact (such· as spray drift) with crops other than field corn should be
|
||||
avoided because many crops are highly sensitive to ETI 114 02 H (refer to SPRAY DRIFT
|
||||
MANAGEMENT).
|
||||
• Use 50-mesh or larger strainer screens.
|
||||
GROUND APPLICATION
|
||||
Broadcast Application -
|
||||
• For best results, use a minimum of 15 gallons of water per acre (15 GPA).
|
||||
• For light, scattered stands of weeds use a minimum of 10 gallons of water per acre (GPA).
|
||||
9
|
||||
|
||||
•
|
||||
•
|
||||
•
|
||||
( (
|
||||
To minimize spray drift and for optimal product performance, adjust the spray boom to the lowest
|
||||
possible spray height recommended in manufacturers' specifications.
|
||||
Select 'nozzles and pressure that deliver MEDIUM spray droplets, for example, as indicated in
|
||||
nozzle manufacturer's catalogues and in accordance with ASAE Standard S572. Nozzles that
|
||||
deliver COARSE spray droplets may be used to reduce drift, provided spray volume is increased
|
||||
to main coverage on small weeds.
|
||||
Be sure that equipment is setup to avoid applying excessive amounts directly over the rows and
|
||||
into the corn plant whorl (most likely to occur when a nozzle is positioned directly above the row).
|
||||
• Crop injury may be caused by overlaps or starting, stopping, slowing, and turning while spraying.
|
||||
Band Application -
|
||||
• Use proportionately less spray mixture and calibrate the band applicator being sure to not exceed
|
||||
the labeled rate. .
|
||||
• Follow the manufacturer's instructions for nozzle type (flat fans), orientation, distance of nozzles
|
||||
from the crop and weeds, spray pressure, spray volumes and calibration.
|
||||
AERIAL APPLICATION
|
||||
NOTE: Aerial applications are prohibited in New York state and California.
|
||||
• Do NOT apply during a temperature inversion, when winds are gusty, or when conditions favor
|
||||
poor coverage and/or off-target spray movement.
|
||||
• Use nozzle types and arrangements that will provide optimum spray distribution and maximum
|
||||
coverage at a minimum 3 GPA
|
||||
SPRAYER PREPARATION I CLEANUP
|
||||
To avoid subsequent crop injury, thoroughly clean all mixing and spray equipment immediately following
|
||||
applications of ETI114 02 H~
|
||||
When spraying or mixing equipment will be used' over an extended period to apply multiple loads of ETI
|
||||
114 02 H, partially fill the tank with fresh water at the end of each day of spraying, flush the boom and
|
||||
hoses, and allow to sit overnight.
|
||||
Prior to applying ETI 114 02 H, the spray equipment must be clean and free of all previous pesticide
|
||||
deposits. Be sure to clean all application eqUipment BEFORE applying ETI 114 02 H by following the
|
||||
cleanup procedures specified on the label of ·the product previously sprayed and following the label
|
||||
directions for proper disposal of the rinsate. If no cleanup procedure is provided, use the following
|
||||
procedure.
|
||||
Cleanup Procedure:
|
||||
NOTE: Steam cleaning aerial spray tanks will help to dislodge any visible pesticide deposits.
|
||||
1. Drain the tank and thoroughly hose down the interior surfaces. Flush the tank, hoses, and boom
|
||||
with clean water for a minimum of 5 minutes.
|
||||
2. Partially fill the tank with clean water and add one gallon of household ammonia (containing 3%
|
||||
active) for every 100 gallons of water. Finish filling the tank with water, then flush the cleaning
|
||||
solution through the hoses, boom, and nozzles. Add more water to completely fill the tank and
|
||||
allow to agitate/recirculate for at least 15 minutes. Again, flush the hoses, boom and nozzles with
|
||||
the cleaning solution, then drain the tank.
|
||||
3. Repeat Step 2.
|
||||
4. Remove the nozzles and screens and clean separately in a bucket containing the cleaning agent
|
||||
and water.
|
||||
5. Thoroughly rinse the tank with clean water for a minimum of 5 min, flushing the water through the
|
||||
hoses and boom. .
|
||||
SPRAY DRIFT MANAGEMENT
|
||||
The interaction of many equipment and weather.:related factors determines the potential for spray drift.
|
||||
The applicator is responsible for considering. all these factors when making application decisions.
|
||||
AVOIDING SPRAY DRIFT IS THE RESPONSIBILITY OF THE APPLICATOR.
|
||||
10
|
||||
|
||||
( (
|
||||
IMPORTANCE OF DROPLET SIZE
|
||||
The most effective way to reduce drift potential is to apply large droplets (>150-200 microns). The best
|
||||
drift management strategy is to apply the largest droplets than provide sufficient coverage and control.
|
||||
The presence of sensitive species nearby, the environmental conditions, and pest pressure may affect
|
||||
how an applicator balances drift control and coverage. APPLYING LARGER DROPLETS REDUCES
|
||||
DRIFT POTENTIAL, BUT WILL NOT PREFENT DRIFT IF APPLICATIONS ARE MADE IMPROPERLY
|
||||
OR UNDER UNFAVORABLE ENVIRONMENTAL CONDITIONS! See Wind, Temperature and Humidity,
|
||||
and Temperature Inversions sections of this label.
|
||||
Controlling Droplet Size - General Techniques
|
||||
Volume - Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with higher
|
||||
rated flows produce larger droplets.
|
||||
Pressure - Use the lower spray pressures· recommended for the nozzle. Higher pressure reduces
|
||||
droplet size and does not improve canopy penetration. WHEN HIGHER FLOW RATES ARE NEEDED,
|
||||
USE A HIGHER-CAPACITY NOZZLE INSTEAD OF INCREASING PRESSURE.
|
||||
Nozzle Type - Use a nozzle type that is designed for the intended application. With most nozzle types,
|
||||
narrower spray angles produce larger droplets. Consider using low-drift nozzles.
|
||||
Controlling Droplet Size - Aircraft
|
||||
Number of Nozzles - Use the minimum number of nozzles with the highest flow rate that provide uniform
|
||||
coverage.
|
||||
Nozzle Orientation - Orienting nozzles so that the spray is emitted backwards, parallel to the airstream
|
||||
will·produce larger droplets than other orientations.
|
||||
Nozzle Type - Solid stream nozzles (such as disc and core with swirl plate removed) oriented straight
|
||||
back produce larger droplets than other nozzle sizes.
|
||||
Boom Length - The boom length should not exceed % of the wing or rotor length - longer booms
|
||||
increase drift potential.
|
||||
Application Height - Application more than 10 feet above the canopy increases the potential for spray
|
||||
drift.
|
||||
BOOM HEIGHT
|
||||
Setting the boom at the lowest labeled height (if specified) which provides uniform coverage reduces the
|
||||
exposure of droplets to evaporation and wind. For ground equipment, the boom should remain level with
|
||||
the crop and have minimal bounce.
|
||||
WIND
|
||||
Drift potential increases at wind speeds of less than 3 mph (due to inversion potential) or more than 10
|
||||
mph. However, many factors, including droplet size and equipment type determine drift potential at any
|
||||
given wind speed. AVOID GUSTY OR WINDLESS CONDITIONS.
|
||||
Note: Locar terrain can influence wind patterns. Every applicator should be familiar with local wind
|
||||
patterns and how they affect spray drift.
|
||||
TEMPERATURE AND HUMIDITY
|
||||
When making applications in hot and dry conditions, set up equipment to produce larger droplets to
|
||||
reduce effects of evaporation.
|
||||
TEMPERATURE INVERSIONS
|
||||
Drift potential is high during a temperature inversion. Temperature inversions restrict vertical air mixing,
|
||||
which causes small suspended droplets to remain close to the ground and move laterally in a
|
||||
concentrated cloud. Temperature inversions are characterized by increasing temperature with altitude
|
||||
and are commori on nights with limited cloud cover and light to no wind. They begin to form as the sun
|
||||
sets and often continue into the morning. Their presence can be indicated by ground fog; howev'er, if fog
|
||||
is not present, inversions can also be identified by the movement of smoke from a ground source or an
|
||||
aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind
|
||||
conditions) indicates an inversion, while smoke. that moves upward and rapidly dissipates indicates good
|
||||
vertical air mixing. .
|
||||
SHIELDED SPRAYERS
|
||||
11
|
||||
|
||||
c
|
||||
Shielding the boom or individual nozzles can reduce the effects of wind. However, it is the responsibility
|
||||
of the applicator to verify that the shields are preventing drift and not interfering with uniform deposition of
|
||||
the product.
|
||||
INTEGRATED PEST MANAGEMENT
|
||||
This product may be used as part of an Integrated Pest Management (IPM) program that can include
|
||||
biological, cultural, and genetic practices aimed at preventing economic pest damage. IPM principles and
|
||||
practices include field scouting or other detection methods, correct target pest identification, population
|
||||
monitoring, and treating when target pest populations reach locally determined action thresholds. Consult
|
||||
your state cooperative extension service,' professional consultants or other qualified authorities to
|
||||
determine appropriate action treatment threshold levels for treating specific pest/crop systems in your
|
||||
area.
|
||||
RESISTANCE
|
||||
When herbicides that affect the same biological site of action are used repeatedly over several years to
|
||||
control the same weed species in the same field, naturally-occurring resistant biotypes may survive a
|
||||
correctly applied herbicide treatment, propagate, and become dominant in that field. Adequate control of
|
||||
these resistant weed biotypes, cannot be expected. If weed control is unsatisfactory, it may be necessary
|
||||
to retreat the problem area using a product affecting a different site of action.
|
||||
To better manage herbicide resistance through delaying the proliferation and possible dominance of
|
||||
herbicide resistant weed biotypes, it may be necessary to change cultural practices within and between
|
||||
crop seasons such as using a combination of tillage, retreatment, tank-mix partners and/or sequential
|
||||
herbicide applications that have a different site of action. Weed escapes that are allowed to go to seed
|
||||
will promote the spread of resistant biotypes.
|
||||
It is advisable to keep accurate records of pesticides applied to individual fields to help obtain information
|
||||
on the spread and dispersal of resistant biotypes. Consult your agricultural dealer, consultant, applicator,
|
||||
and/or appropriate state agricultural extension service representative for specific alternate cultural
|
||||
practices or herbicide alternatives available in your area.
|
||||
IMPORTANT PRECAUTIONS
|
||||
Injury or loss of desirable vegetation may result from failure to observe the following:
|
||||
• Do not apply ETI 114 02 H or drain or flush application equipment on or near desirable trees or other
|
||||
plants, or on areas where their roots 'may extend, or in locations where the chemical may be washed
|
||||
or moved into contact with their roots.
|
||||
• Do not use on lawns, walks, driveways, tennis courts or similar areas.
|
||||
• Prevent drift of spray to desirable plants.
|
||||
• Do not contaminate any body of water.
|
||||
• Thoroughly clean application equipment immediately after use. (See the Sprayer Cleanup section of
|
||||
this label for instructions.)
|
||||
• Do not graze or feed forage, hay, or straw from treated areas to livestock within 30 days of ETI 114
|
||||
02 H application. '
|
||||
STORAGE AND DISPOSAL
|
||||
Do not contaminate water, food, or feed by storage or disposal.
|
||||
PESTICIDE STORAGE: Store product in original container only. Do not contaminate water; other
|
||||
pestiCides, fertilizer,food or feed in storage. Store in a cool, dry place.
|
||||
PESTICIDE DISPOSAL: Wastes resulting fro,m the use of this product may be disposed of on site or at
|
||||
an approved waste disposal facility.
|
||||
CONTAINER DISPOSAL: Nonrefillable container. Do not reuse or refill this container, Offer for
|
||||
recycling if available. Triple rinse .container (or equivalent) promptly after emptying. Triple rinse as
|
||||
follows: Empty the remaining contents into application equipment or a mix tank and drain for 10
|
||||
seconds after the flow begins to 'drip. Fill the container X full with water and recap. Shake for 10
|
||||
seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal.
|
||||
Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times.
|
||||
12
|
||||
|
||||
( (
|
||||
CONDITION OF SALE AND LIMITATION OF WARRANTY AND LIABILITY
|
||||
NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation of Warranty and
|
||||
Liability before buying or using this product. If the terms are not acceptable, return the product at once,
|
||||
unopened, and the purchase price will be refunded.
|
||||
The Directions for Use of this product must be followed carefully. It is impossible to eliminate all risks
|
||||
inherently associated with the use of this product. Ineffectiveness or other unintended consequences
|
||||
may result because of such factors as manner of use or application, weather,. presence of other materials
|
||||
or other influencing factors in the use of the product, which are beyond the control of Etigra or Seller. All
|
||||
such risks shall be assumed by Buyer and User, and Buyer and User agree to hold Etigra and Seller
|
||||
harmless forany claims relating to such factors,
|
||||
Etigra warrants that this product conforms to the chemical description on the label and is reasonably fit for
|
||||
the purposes stated in the Directions for Use, subject to the inherent risks referred to above, when used
|
||||
in accordance with the Directions for Use .. This warranty does not extend to the use of this product
|
||||
contrary to label instructions, or under conditions not reasonably foreseeable to or beyond the control of
|
||||
, Seller or Etigra, and Buyer and User assume the risk of any such use. TO THE EXTENT CONSISTENT
|
||||
WITH APPLICABLE LAW, ETIGRA MAKES NO WARRANTIES OF MERCHANTABILITY OR OF
|
||||
FITNESS FOR A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR IMPLIED WARRANTY
|
||||
EXCEPT AS STATED ABOVE.
|
||||
To the extent consistent with applicable law, neither Etigra nor Seller shall be liable for any incidental,
|
||||
consequential or special damages resulting from the use or handling of this product. TO THE EXTENT
|
||||
CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER OR BUYER,
|
||||
AND THE EXCLUSIVE LIABILITY OF ETIGRA AND S.ELLER FOR ANY AND ALL CLAIMS, LOSSES,
|
||||
INJURIES OR DAMAGES (INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, CONTRACT,
|
||||
NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE)' RESULTING FROM THE USE OR
|
||||
HANDLING OF THIS PRODUCT, SHALL BE THE RETURN OF THE PURCHASE PRICE OF THE
|
||||
PRODUCT OR, AT THE ELECTION OF ETIGRA OR SELLER, THE REPLACEMENT OF THE
|
||||
PRODUCT.
|
||||
Etigra and Seller offer this product, and Buyer and User accept it, subject to the foregoing Conditions of
|
||||
Sale and Limitation of Warranty and Liability, which may not be modified except by written agreement
|
||||
signed by a duly authorized representative of I:tigra.
|
||||
ETI 11402 H is not manufactured or distributed by DuPont, seller of Accent®.
|
||||
Accent® and CINCH® are trademarks of E.I. DuPont de Nemours and Company.
|
||||
AXiom®, Aztec® ,and Balance® are trademarks of Bayer CropScience. '
|
||||
Basagran®, Clarity®, Counter®, Laddok®, Marksman®, Outlook®, Prowl® and Thimet® are trademarks of
|
||||
BASF A~ Products.
|
||||
Beacon ® Dual®, Exceed® and Force® are trademarks of Syngenta Crop Protection, Inc.
|
||||
Fortress is a trademark of Amvac Chemical Corporation. .
|
||||
Harness® is a trademark of Monsanto Technology, LLC
|
||||
Lorsban® and Surpass® are trademarks of Dow AgroSciences, LLC
|
||||
Etigra® is a trademark of Etigra.
|
||||
EPA [approval date]
|
||||
13
|
||||
Reference in New Issue
Block a user