docker: production image + Gitea Actions for monthly refresh

Dockerfile: self-contained image with corpus + Chroma + BM25 baked
in. Drawbar's compose pulls + runs without volume mounts. Built from
sources.json (labels schema), PRODUCT_NAME=crop_chem by default,
HYBRID_SEARCH=true (always-on for production quality). RERANK_URL +
OLLAMA_URL get set at compose time.

.gitea/workflows/refresh.yml: monthly cron (1st @ 06:00 UTC) does
full scrape → reindex → image push. Scrapes Bayer (~30 min) +
EPA PPLS row-crop filtered (~7h). Skips reindex+push if no corpus
diff. Tags pushed: :latest, :<sha12>, :corpus-<YYYY.MM.DD>.

.gitea/workflows/image-only.yml: on-demand or auto on code-only
pushes to main (paths: docs_mcp/, rag/, scrape/, requirements.txt,
Dockerfile, sources.json). Reindexes from committed corpus, builds
image, pushes. ~10 min vs ~9h full refresh.

.gitignore: corpus/ now COMMITTED (4,159 labels, 265 MB of .md +
sidecars). Lets image-only.yml rebuild indexes without re-scraping.
chroma/ + bm25/ still gitignored (regenerable binary indexes).

.dockerignore: drops venv, eval results, PLAN/README/CLAUDE.md,
deploy/, .git/ — keeps the image lean. corpus + chroma + bm25
explicitly NOT in dockerignore (those go INTO the image).

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

corpus/epa_ppls/241-380.md

@@ -0,0 +1,896 @@
+# RAPTOR DG HERBICIDE
+
+- EPA Reg No: **241-380**
+- Registrant: BASF AGRICULTURAL SOLUTIONS US LLC
+- Signal word: Caution
+- Active ingredients: Imazamox (70%)
+- Label accepted: 2025-11-05
+- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000241-00380-20251105.pdf
+
+---
+November 5th, 2025 
+ 
+Christa Ellers-Kirk 
+Product Registration Manager 
+BASF Corporation 
+26 Davis Drive 
+Research Triangle Park, NC 27709-3528 
+ 
+Subject: Label Amendment - Registration Review Mitigation for Imazamox (Acetolactate 
+Synthase (ALS) Inhibiting Herbicides) 
+ Product Name: RAPTOR DG HERBICIDE 
+ EPA Registration Number: 241-380 
+Case Number: 478844 
+Application Dates: April 9, 2020 
+ 
+Dear Christa Ellers-Kirk: 
+ 
+The Agency, in accordance with the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), 
+as amended, has completed reviewing all the information submitted with your application to 
+support the Registration Review of the above referenced product in connection with the 
+Imazamox (Acetolactate Synthase (ALS) Inhibiting Herbicides) Interim Decision, and has 
+concluded that your submission is acceptable. The label referred to above, submitted in 
+connection with registration under FIFRA, as amended, is acceptable. 
+ 
+Should you wish to add/retain a reference to the company’s website on your label, then please 
+be aware that the website becomes labeling under the Federal Insecticide, Fungicide, and 
+Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the 
+product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 
+40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In 
+addition, regardless of whether a website is referenced on your product’s label, claims made on 
+the website may not substantially differ from those claims approved through the registration 
+process. Therefore, should the Agency find or if it is brought to our attention that a website 
+contains false or misleading statements or claims substantially differing from the EPA approved 
+registration, the website will be referred to the EPA’s Office of Enforcement and Compliance 
+Assurance. 
+ 
+A stamped copy of your labeling is enclosed for your records. This labeling supersedes 
+all previously accepted labeling and must be used at your next label printing. You must
+
+Page 2 of 2 
+EPA Reg. No. 241-380 
+Case No. 478844 
+ 
+submit one copy of the final printed labeling before you release the product for 
+shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may 
+distribute or sell this product under the previously approved labeling for 12 months 
+from the date of this letter. After 12 months, you may only distribute or sell this 
+product if it bears this new revised labeling or subsequently approved labeling. “To 
+distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation 
+at 40 CFR 152.3. 
+ 
+If you have any questions about this letter, please contact Caleb Carr by phone at 202-566-
+0636, or via email at carr.caleb@epa.gov. 
+ 
+ Sincerely, 
+ 
+ 
+ 
+ 
+Maryam K. Muhammad-Perch, Team Lead 
+Risk Management and Implementation Branch 4 
+Pesticide Re-Evaluation Division 
+Office of Pesticide Programs 
+ 
+ 
+ 
+ 
+ENCLOSURE: Stamped label
+
+1 
+Imazamox Group 2 Herbicide 
+RAPTOR® DG 
+Herbicide 
+FOR USE ONLY IN SOYBEANS 
+ACTIVE INGREDIENT: 
+Imazamox 2-[4,5-dihydro-4-methyl-4-(1-methylethyl)- 
+5-oxo-1H-imidazol-2-yl]-5-(methoxymethyl)-3-pyridinecarboxylic acid ......................................................................... 70.0% 
+INERT INGREDIENTS .................................................................................................................................................... 30.0% 
+TOTAL .............................................................................................................................................................................. 100.0% 
+RAPTOR DG in a water soluble packet.
+(1 packet contains 0.08 pounds of active ingredient as the free acid) 
+Patent No. 5,334,576 
+EPA Reg. No. 241-380 EPA Est. No. 
+KEEP OUT OF REACH OF CHILDREN 
+CAUTION/PRECAUCION 
+Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. 
+(If you do not understand this label, find someone to explain it to you in detail). 
+STATEMENT OF PRACTICAL TREATMENT 
+IF IN EYES: Flush eyes with plenty of water. Call a physician if irritation persists. 
+IF ON SKIN: Wash with plenty of soap and water. Get medical attention if irritation persists. 
+IF INHALED: Remove victim to fresh air. 
+In case of an emergency endangering life or property involving this product, call day or night 
+1-800-832-HELP (4357). 
+Do not remove packages from container except for immediate use. 
+See Next Page for Additional Precautionary Statements 
+BASF Corporation 
+26 Davis Drive 
+Research Triangle Park, NC 27709 
+Net Contents: 5 X 1.82 ounce packets 
+11/05/2025
+241-380
+
+2 
+PRECAUTIONARY STATEMENTS 
+HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
+CAUTION! 
+Causes moderate eye irritation. Harmful if absorbed through skin or inhaled. Avoid breathing dust. Avoid contact with skin, 
+eyes or clothing. 
+Personal Protective Equipment (PPE): 
+Applicators and other handlers must wear: 
+-long-sleeved shirt and long pants 
+-waterproof gloves 
+-shoes plus socks 
+Follow manufacturer’s instructions for cleaning and maintaining PPE. If no such instructions for washables exist, use 
+detergent and hot water. Keep and wash PPE separately from other laundry. 
+User Safety Recommendations: 
+Users Should: 
+-Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. 
+-Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. 
+ 
+ENGINEERING CONTROLS STATEMENT 
+Water soluble packets, when used correctly, qualify as a closed mixing/loading system under the Worker Protection Standard 
+[40 CFR 170.607(d)]. Mixers and loaders handling this product while it is enclosed in intact water soluble packets may elect 
+to wear reduced PPE of long-sleeved shirt, long pants, shoes, socks. When reduced PPE is worn because a closed system is 
+being used, handlers must be provided all PPE specified above for “applicators and other handlers” and have such PPE 
+immediately available for use in an emergency, such as a spill or equipment break-down. 
+ENVIRONMENTAL HAZARDS 
+This pesticide may be hazardous to plants outside the treated area. DO NOT apply directly to water, or to areas where surface 
+water is present, or to intertidal areas below the mean high water mark. Offsite movement from spray drift, volatilization, and 
+runoff may be hazardous to neighboring crops and vegetative habitat utilized for food and cover by wildlife and aquatic 
+organisms. 
+DO NOT contaminate water when disposing of equipment washwaters. 
+Nontarget Organism Advisory Statement: This product is toxic to plants and may adversely impact the forage and habitat 
+of nontarget organisms, including pollinators, in areas adjacent to the treated site. Protect the forage and habitat of nontarget 
+organisms by following label directions intended to minimize spray drift. 
+Groundwater Advisory Statement: This chemical has properties and characteristics associated with chemicals detected in 
+groundwater. This chemical may leach into groundwater if used in areas where soils are permeable, particularly where the 
+water table is shallow. 
+Surface Water Advisory Statement: This product may impact surface water quality due to runoff of rain water. This is 
+especially true for poorly draining soils and soils with shallow ground water. This product is classified as having high 
+potential for reaching surface water via runoff for several months or more after application. 
+A level, well-maintained vegetative buffer strip between areas to which this product is applied and surface water features 
+such as ponds, streams, and springs will reduce the potential loading of Raptor® DG herbicide from runoff water and 
+sediment. Runoff of this product will be reduced by avoiding applications when rainfall or irrigation is expected to occur 
+within 48 hours. 
+DIRECTIONS FOR USE 
+It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
+Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected 
+handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency 
+responsible for pesticide regulation.
+
+3 
+This labeling must be in the possession of the user at the time of pesticide application. 
+Observe all cautions and limitations on this label and on the labels of products used in combination with Raptor® DG 
+herbicide. Do not use RAPTOR DG other than in accordance with the instructions set forth on this label. The use of 
+RAPTOR DG not consistent with this label may result in injury to crops. Keep containers closed to avoid spills and 
+contamination. 
+DO NOT apply this product through any type of irrigation system. 
+AGRICULTURAL USE REQUIREMENTS 
+Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This 
+Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, 
+and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency 
+assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal 
+protective equipment (PPE), and restricted-entry interval. The requirements in this box only apply to uses of this product 
+that are covered by the Worker Protection Standard. 
+Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 4 hours. Exception: if the 
+product is soil-injected or soil-incorporated, the Worker Protection Standard, under certain circumstances, allows workers 
+to enter the treated area if there will be no contact with anything that has been treated. 
+PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves 
+contact with anything that has been treated, such as plants, soil, or water, is: 
+• Coveralls 
+• Waterproof gloves 
+• Shoes plus socks 
+ 
+STORAGE AND DISPOSAL 
+PROHIBITIONS: DO NOT contaminate water, food or feed by storage or disposal. 
+PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be disposed of on site or at an approved 
+waste disposal facility. 
+CONTAINER DISPOSAL: DO NOT reuse outer packaging. Dispose of outer packaging in a sanitary landfill, or by 
+incineration, or if allowed by state and local authorities, by burning. If burned stay out of 
+smoke. 
+ 
+DISCLAIMER 
+The label instructions for the use of this product reflect the opinion of experts based on research and field use. The directions 
+are believed to be reliable and should be followed carefully. However, it is impossible to eliminate all risks inherently 
+associated with use of this product. Crop injury, ineffectiveness or other unintended consequences may result because of such 
+factors as weather conditions, presence of other materials, herbicide resistant weed populations, or the use of, or application 
+of the product contrary to label instructions, all of which are beyond the control of BASF Corporation. All such risks shall be 
+assumed by the user. 
+BASF Corporation shall not be responsible for losses or damages resulting from use of this product in any manner not set 
+forth on this label. User assumes all risks associated with the use of this product in any manner not specifically set forth on 
+this label. 
+BASF CORPORATION warrants only that the material contained herein conforms to the chemical description on the label 
+and is reasonably fit for the use therein described when used in accordance with the directions for use, subject to the risks 
+referred to above. BASF CORPORATION DOES NOT MAKE OR AUTHORIZE ANY AGENT OR 
+REPRESENTATIVE TO MAKE ANY OTHER WARRANTIES, EXPRESS OR IMPLIED AND EXPRESSLY 
+EXCLUDES AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A 
+PARTICULAR PURPOSE.
+
+4 
+BUYER’S EXCLUSIVE REMEDY AND BASF CORPORATION’S EXCLUSIVE LIABILITY, WHETHER IN 
+CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, SHALL BE LIMITED TO 
+REPAYMENT OF THE PURCHASE PRICE OF RAPTOR
+® DG HERBICIDE. In no case shall BASF Corporation or 
+the seller be liable for consequential, special or indirect damages resulting from the use or handling of this product. 
+USES WITH OTHER PRODUCTS (TANK-MIXES) 
+If this product is used in combination with any other product except as specifically recommended in writing by BASF 
+Corporation, then BASF Corporation shall have no liability for any loss, damage or injury arising out of its use in any such 
+combination not so specifically recommended. If used in combination recommended by BASF Corporation, the liability of 
+BASF Corporation shall in no manner extend to any damage, loss or injury not directly caused by the inclusion of the BASF 
+Corporation product in such combination use, and in any event shall be limited to return of the amount of the purchase price 
+of the BASF Corporation product. 
+GENERAL INFORMATION 
+RAPTOR DG is effective in controlling weeds in conservation tillage and conventional production systems. RAPTOR DG 
+can be applied early postemergence in soybeans but before the bloom stage. Refer to the specific treatment under the 
+“APPLICATION INFORMATION” section of the label. 
+The mode of weed killing activity involves uptake of RAPTOR DG by foliage and/or weed roots and rapid translocation to 
+the growing points. After RAPTOR DG application, susceptible weeds may show yellowing and weed growth will stop. 
+Susceptible weeds stop growing and either die or are not competitive with the crop. Adequate soil moisture is important for 
+optimum RAPTOR DG activity. When adequate soil moisture is present, RAPTOR DG will provide residual activity of 
+susceptible germinating weeds; activity on established weeds will depend on the weed species and the location of its root 
+system in the soil. A timely cultivation after a RAPTOR DG application may improve general weed control. 
+Use of RAPTOR DG is expected to result in normal growth of rotational crops in most situations; however, various 
+environmental and agronomic factors make it impossible to eliminate all risks associated with the use of this product and, 
+therefore, rotational crop injury is always possible. 
+Occasionally, internode shortening and/or temporary yellowing of crop plants may occur following RAPTOR DG 
+applications. These effects can be more pronounced if crops are growing under stressful environmental or hot and humid 
+conditions. These effects occur infrequently and are temporary. Normal growth and appearance should resume within 1 to 2 
+weeks. 
+Replanting: If replanting is necessary in a field previously treated with RAPTOR DG, the field may be replanted to 
+soybeans. Rework the soil no deeper than 2 inches. DO NOT apply a second treatment of RAPTOR DG. 
+Mode of Action (MOA) 
+Imazamox, the active ingredient in Raptor DG is a Group 2 (WSSA) herbicide. Herbicides in this group inhibit acetolactate 
+synthase (ALS) or acetohydroxyacid synthase (AHAS), a key enzyme in the biosynthesis of the branched-chain amino acids 
+isoleucine, leucine, and valine. Meristematic chlorosis, followed by general foliar chlorosis and eventual plant death results 
+from events occurring in response to ALS inhibition and low branched-chain amino acid production. 
+Weed Resistance Management 
+Herbicide resistance could be suspected when the following three indicators occur at a site: 
+• There is failure to control a weed species normally controlled by the herbicide at the dose applied, especially if control is 
+achieved on adjacent weeds. 
+• There is a spreading patch of non-controlled plants of a particular weed species. 
+• The surviving plants are mixed with controlled individuals of the same species. 
+Contact your local sales representative, crop advisor, or extension agent to find out if suspected resistant weeds to this MOA 
+have been found in your region. 
+Weed resistance to Group 2 herbicides is common in a number of weed species and in populations of naturally occurring 
+biotypes
+* of some of the weeds listed on this label, which may not be effectively controlled by this and/or other products with 
+the ALS/AHAS enzyme-inhibiting mode of action. 
+Naturally occurring biotypes* of some of the weeds listed on this label may not be effectively controlled by this and/or other 
+products with either the ALS/AHAS enzyme inhibiting mode of action. Other herbicides with the ALS/AHAS enzyme 
+inhibiting mode of action include the sulfonylureas (e.g. Accent1, Basis1, Classic1, Concert1, Exceed2, Permit3, Pinnacle1, 
+etc.), the sulfonamides (e.g., Broadstrike4, etc.) and the pyrimidyl benzoates (e.g. Staplel, etc.). If naturally occurring 
+ALS/AHAS resistant biotypes are present in a field, RAPTOR DG and/or any other ALS/AHAS enzyme inhibiting mode of
+
+5 
+action herbicide should be tank-mixed or applied sequentially with an appropriate registered herbicide having a different 
+mode of action to ensure control. 
+* A weed biotype is a naturally occurring plant within a given species that has a slightly different, but distinct, genetic makeup from other plants. 
+Raptor® DG herbicide is very active against many broadleaf and grass weed species. For long-term weed management, use 
+at least two herbicides with different modes of action to reduce the potential for weed resistance. Crop (and herbicide) 
+rotation is effective in managing weed resistance where herbicides of different modes of action are used. Tillage, where 
+practical (such as in fallow production or before planting), is effective in controlling weeds to minimize resistance 
+development. Additionally, a burndown herbicide during fallow or before planting is effective in reducing weed resistance 
+development. 
+Resistance management should be part of a diversified weed control strategy that integrates chemical, cultural and 
+mechanical (tillage) control tactics. Cultural control tactics include crop rotation, proper fertilizer placement and optimum 
+seeding rate/row spacing. Consult your local BASF representative, state cooperative extension service, professional 
+consultants, or other qualified authority to determine appropriate actions if you suspect resistant weeds. 
+Chemical Control 
+• Start clean with tillage or an effective burn-down herbicide program. 
+• DO NOT rely on a single herbicide mode of action for weed control. 
+• Follow labeled application rate and weed growth stage specifications. 
+• The use of preemergence herbicides that provide soil residual control of broadleaf and grass weeds is recommended to 
+reduce early season weed competition and allow for timely in-crop postemergence herbicide applications. 
+• Avoid application of herbicides with the same mode of action more than twice a season. 
+• Use tank mixes and sequential applications with other herbicides possessing different modes of action (MOAs) that are also 
+effective on the target weeds. 
+Scouting and Containment 
+• Scout fields after herbicide application to identify areas where weed control was ineffective. 
+• Control weed escapes with herbicides possessing a different mode of action or use a mechanical control measure. Weed 
+escapes should not be allowed to reproduce by seed or to proliferate vegetatively. 
+• Scout fields before herbicide application to ensure herbicides and rates will be optimum for the weed species and weed sizes 
+present. Consider application and environmental factors that may have led to incomplete control. 
+• Contact your herbicide supplier and/or your local BASF representative to report weed escapes. 
+• Clean equipment before moving to a different field to avoid spread of resistant weeds. 
+Additional state restrictions and requirements may apply. The applicator must comply with any additional state requirements 
+and restrictions. 
+MIXING INSTRUCTIONS 
+POSTEMERGENCE APPLICATIONS OF RAPTOR DG REQUIRE THE ADDITION OF AN ADJUVANT AND A 
+NITROGEN FERTILIZER SOLUTION. 
+I. ADJUVANTS 
+CROP OIL CONCENTRATE: A petroleum or vegetable seed based crop oil concentrate (such as SUN-IT II5) may be 
+used. SUN-IT II is recommended when weeds are under moisture or temperature stress. Use SUN-IT II or other 
+methylated seed oils at the rate of 1.5 to 2 pints per acre (use the higher rate when weeds are at the maximum label size). 
+or use a crop oil concentrate at 2 pints per acre. 
+OR 
+SURFACTANTS: Use a nonionic surfactant containing at least 80% active ingredient. Apply the surfactant at the rate of 
+1 quart per 100 gallons of spray solution. An organo-silicone surfactant may be used in place of a non-ionic surfactant. 
+AND 
+II. NITROGEN FERTILIZER SOLUTION 
+Recommended nitrogen based fertilizers include liquid fertilizers (such as 28%N, 32%N or 10-34-0) at the rate of 
+1-2 quarts per acre. Use the higher rate when weeds are under moisture or temperature stress. Instead of a liquid fertilizer, 
+spray grade ammonium sulfate may be used at the rate of 2.5 pounds per acre. 
+NOTE: Nitrogen fertilizer solution is not required when applied in use areas south of Interstate Highway 40. 
+Fill the spray tank one-third to one-half full with clean water. Add the required number of RAPTOR DG soluble packets to 
+the spray tank while agitating. Add adjuvants and fill the remainder of the tank with water.
+
+6 
+Instructions for Using Water Soluble Packages Directly into Spray Tanks: 
+Water Soluble Packages (WSPs) are designed to dissolve in water. Agitation m be used, if necessary, to help dissolve the 
+WSP. Failure to follow handling and mixing instructions can increase your exposure to the pesticide products in WSPs. 
+WSPs, when used properly, qualify as a closed mixing/loading system under the Agricultural Worker Protection Standard [40 
+CFR 170.607(d)]. 
+Handling Instructions 
+Follow these steps when handling pesticide products in WSPs. 
+1. Mix in spray tank only. 
+2. Handle WSP(s) in a manner that protects package from breakag e and/or unintended release of contents. If package is 
+broken, put on PPE required for clean-up and then continue with mixing instructions. 
+3. Keep the WSP(s) in outer packaging until just before use. 
+4. Keep the WSP dry prior to adding to the spray tank. 
+5. Handle with dry gloves and according to the label instructions for PPE. 
+6. Keep WSP intact. Do not cut or puncture WSP. 
+7. Reseal the WSP outer packaging to protect any unused WSP(s). 
+Mixing Instructions 
+Follow the steps below when mixing this product, including if tank mixed with other pesticide products. If being tank mixed, 
+the mixing directions 1 through 9 below take precedence over the mixing directions of the other tank mix products. WSPs 
+may, in some cases, be mixed with other pesticide products so long as the directions for use of all mixed products do not 
+conflict. Do not tank mix this product with products that prohibit tank mixing or have conflicting mixing directions. 
+1. If a basket or strainer is present in the tank h atch, remove prior to adding the WSP to the tank. 
+2. Fill tank with water to approximately one-third to one-half of the desired final volume of spray. 
+3. Stop adding water and stop any agitation. 
+4. Place intact/unopened WSP(s) into the tank. 
+5. Do not spray water from a hose or fill pipe to break or dissolve the WSP(s). 
+6. Start mechanical and recirculation agitation from the bottom of tank without using any overhead recirculation, if possible. 
+If overhead recirculation cannot be turned off, close the hatch before starting agitation. 
+7. Dissolving the WSP(s) may tank up to 5 minutes or longer, depending on water temperature, water hardness and intensity 
+of agitation. 
+8. Stop agitation before tank lid is opened. 
+9. Open the lid to the tank, exercising caution to avoid contact with dusts or spray mix, to verify that the WSPs have fully 
+dissolved and the contents have been thoroughly mixed into the solution. 
+10. Do not add other allowed products or complete filling the tank until the bags have fully dissolved and pesticide is 
+thoroughly mixed. 
+11. Once the WSP have fully dissolved and any other products have been added to the tank, resume filling the tank with 
+water to the desired level, close the tank lid, and resume agitation. 
+12. Use the spray solution when mixing is complete. 
+13. Maintain agitation of the diluted pesticide mix during transport and application. 
+14. It is unlawful to use any registered pesticide, including WSPs, in a manner inconsistent with its label. 
+TANK MIX COMBINATIONS WITH OTHER HERBICIDES 
+If other herbicides or other spray tank components are tank-mixed with RAPTOR DG, while agitating, add components in 
+the following order and thoroughly mix after adding each component: 
+1) Fill spray tank one-third to one-half full with clean water. 
+2) Add soluble packet products and thoroughly mix. 
+3) Add WP (wettable powder), DG (dispersible granule), DF (dry flowable) or liquid flowable formulations not in soluble 
+packets. 
+4) Add Raptor® DG herbicide and thoroughly mix. 
+5) Add other aqueous solution products. 
+6) Add EC (emulsifiable concentrate) products. 
+7) Add surfactant or crop oil to the spray tank. 
+8) Add nitrogen fertilizer solution. 
+9) While agitating, fill the remainder of the tank with water.
+
+7 
+DO NOT add RAPTOR® DG herbicide packets directly into nitrogen fertilizer solution. Add nitrogen fertilizer only after 
+RAPTOR DG is completely dissolved. 
+To avoid injury to sensitive crops, spray equipment used for RAPTOR DG applications must be drained and thoroughly 
+cleaned with water before being used to apply other products. 
+When RAPTOR DG is used in combination with another herbicide, refer to the respective label for rates, methods of 
+application, proper timing, weeds controlled, restrictions and precautions. Always use in accordance with the more restrictive 
+label restrictions and precautions. No label dosages should be exceeded. RAPTOR DG cannot be mixed with any product 
+containing a label prohibiting such mixtures. 
+SPRAYING INSTRUCTIONS 
+Mandatory Spray Drift Management 
+Aerial Applications: 
+• Do not release spray at a height greater than 10 ft above the ground or vegetative canopy, unless a greater application 
+height is necessary for pilot safety. 
+• Applicators are required to use a medium or coarser droplet size (ASABE S641). 
+• Applicators must use 1/2 swath displacement upwind at the downwind edge of the field. 
+• Do not apply when wind speeds exceed 15 mph at the application site. If the windspeed is greater than 10 mph, the boom 
+length must be 65% or less of the wingspan for fixed wing aircraft and 75% or less of the rotor diameter for helicopters. 
+Otherwise, the boom length must be 75% or less of the wingspan for fixed-wing aircraft and 90% or less of the rotor 
+diameter for helicopters. 
+• Do not apply during temperature inversions. 
+Ground Boom Applications: 
+• User must only apply with the release height recommended by the manufacturer, but no more than 3 feet above the 
+ground or crop canopy. 
+• Applicators are required to use a medium or coarser droplet size (ASAE S572.3). 
+• Do not apply when wind speeds exceed 15 miles per hour at the application site. 
+• Do not apply during temperature inversions. 
+ 
+SPRAY DRIFT ADVISORIES 
+THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT. BE AWARE OF NEARBY NON-
+TARGET SITES AND ENVIRONMENTAL CONDITIONS. 
+IMPORTANCE OF DROPLET SIZE 
+An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide target pest control. 
+While applying larger droplets will reduce spray drift, the potential for drift will be greater if applications are made 
+improperly or under unfavorable environmental conditions. 
+Controlling Droplet Size – Ground Boom: 
+• Volume - Increasing the spray volume so that larger droplets are produced will reduce spray drift. Use the highest practical 
+spray volume for the application. If a greater spray volume is needed, consider using a nozzle with a higher flow rate. 
+• Pressure - Use the lowest spray pressure recommended for the nozzle to produce the target spray volume and droplet size. 
+• Spray Nozzle - Use a spray nozzle that is designed for the intended application. Consider using nozzles designed to reduce 
+drift.
+
+8 
+Controlling Droplet Size – Aircraft: 
+• Adjust Nozzles - Follow nozzle manufacturers’ recommendations for setting up nozzles. Generally, to reduce fine droplets, 
+nozzles should be oriented parallel with the airflow in flight. 
+BOOM HEIGHT – Ground Boom: For ground equipment, the boom should remain level with the crop and have minimal 
+bounce. 
+RELEASE HEIGHT - Aircraft: Higher release heights increase the potential for spray drift. 
+SHIELDED SPRAYERS 
+Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify that the shields are 
+not interfering with the uniform deposition of the spray on the target area. 
+TEMPERATURE AND HUMIDITY 
+When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation. 
+TEMPERATURE INVERSIONS 
+Drift potential is high during a temperature inversion. Temperature inversions are characterized by increasing temperature 
+with altitude and are common on nights with limited cloud cover and light to no wind. The presence of an inversion can be 
+indicated by ground fog or by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that 
+layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that 
+moves upward and rapidly dissipates indicates good vertical air mixing. Avoid applications during temperature inversions. 
+WIND 
+Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND CONDITIONS. 
+• Applicators need to be familiar with local wind patterns and terrain that could affect spray drift. 
+DO NOT apply when wind velocity is greater than 15 mph, when temperature inversion conditions exist, or when spray may 
+be carried to sensitive crops. Sensitive crops include but are not limited to leafy vegetables and sugar beet. 
+GROUND APPLICATION: 
+Uniformly apply with properly calibrated ground equipment in 10 or more gallons of water per acre. A spray pressure of 20 
+to 40 psi is recommended. 
+To ensure thorough coverage, use a minimum of 20 gallons of water per acre when applying Raptor® DG herbicide to 
+minimum or no-till crops. Use higher gallonage for fields with dense vegetation or heavy crop residues. 
+Adjust the boom height to ensure proper coverage of weed foliage (according to the manufacturer’s recommendation). Use 
+only flat-fan nozzle tips. 
+Avoid overlaps when spraying. 
+GROUND APPLICATION WITH A LOW VOLUME SPRAYER 
+RAPTOR DG may be applied to soybeans with a low volume (Spra-Coupe6-type) sprayer. When applying RAPTOR DG 
+with a low volume sprayer, spray the weeds before they reach the maximum size listed in this label. Adequate control of 
+weeds is dependent upon good spray coverage of the weeds. The sprayer must be calibrated to deliver the recommended 
+spray volume and pressure to ensure adequate spray coverage of the weeds. 
+When applying RAPTOR DG with a low volume sprayer, apply a minimum of 10 gallons per acre of spray solution with a 
+nozzle pressure between 40-60 psi for optimum coverage. 
+AERIAL APPLICATION: 
+RAPTOR DG herbicide may be applied by air to soybeans. 
+Uniformly apply with properly calibrated aerial equipment in 5 or more gallons of water per acre. The addition of an adjuvant 
+AND fertilizer solution are required for optimum weed control. Apply a non-ionic surfactant at the rate of 1 quart per 100 
+gallons of spray solution OR a crop oil concentrate at the rate of 1.25 gallons per 100 gallons of spray solution AND a 
+nitrogen fertilizer solution at the rate of 1 quart per acre. (See instructions under MIXING INSTRUCTIONS).
+
+9 
+To avoid injury to sensitive crops from drift, aerial applicators must adhere to the following SPECIAL AERIAL USE 
+DIRECTIONS AND PRECAUTIONS. 
+- Nozzles must be pointed toward the rear of the aircraft. The downward angle of the nozzle should not be greater than 20 
+degrees. 
+- To minimize wing-tip vortex roll, nozzles or spray boom must not be located any closer to end of wing or rotor than 
+three-fourths the distance from the center of the aircraft. 
+- Use a maximum spray pressure of 40 psi. 
+- A buffer zone must be established between the area to be sprayed and sensitive crops. 
+- DO NOT spray when wind velocity is greater than 15 mph. 
+Applicator is responsible for any loss or damage which results from spraying Raptor® DG herbicide in a manner other than 
+recommended in this label. In addition, applicator must follow all applicable state and local regulations and ordinances in 
+regard to spraying. 
+APPLICATION INFORMATION 
+Apply RAPTOR DG herbicide as a postemergence treatment when weeds are actively growing and before they exceed 
+a height of 5 inches, unless otherwise indicated. Delay application until the majority of the weeds are at the recommended 
+growth stage. Application timing should be based on weed size and not crop growth stage. Apply RAPTOR DG to crops and 
+weeds that are actively growing. 
+An adjuvant (either a surfactant or a crop oil concentrate) and a nitrogen fertilizer must be added to the spray solution for 
+optimum weed control activity. See the ADJUVANT section under MIXING INSTRUCTIONS for specific instructions. 
+When RAPTOR DG is applied postemergence, absorption will occur through both the roots and foliage. Susceptible weeds 
+stop growing and either die or are not competitive with the crop. RAPTOR DG not only controls many existing broadleaf 
+and grass weeds when applied postemergence, it also provides activity on susceptible weeds that may emerge shortly after 
+application. 
+For maximum weed control, cultivate 7 - 10 days following a postemergence RAPTOR DG application. This timely 
+cultivation will enhance residual weed activity, especially under dry conditions. 
+RAPTOR DG should be applied a minimum of one hour before rainfall or overhead irrigation. 
+NO-TILL/MINIMUM TILLAGE AND DOUBLE CROP SOYBEANS 
+RAPTOR DG controls existing weeds and provides residual activity on some weeds when applied early postemergence to 
+soybeans in no-till or minimum tillage and double crop soybean production systems. The application must be applied after 
+emergence of the crop. (Refer to the WEEDS CONTROLLED chart for weeds controlled and recommended weed size). 
+To ensure thorough coverage, use a minimum of 20 gallons of water per acre in no-till or minimum tillage systems. Use 
+higher gallonage for fields with dense vegetation or heavy crop residues. 
+USE RATE 
+APPLY 0.73 OUNCES OF RAPTOR DG HERBICIDE WHEN PRECEDED BY A FULL RATE OF A 
+REGISTERED SOIL APPLIED GRASS HERBICIDE LIKE PROWL® 3.3 EC HERBICIDE 
+(1 soluble packet treats 2.5 acres) 
+OR 
+APPLY 0.91 OUNCES OF RAPTOR DG HERBICIDE PER ACRE IN A TOTAL 
+POSTEMERGENCE HERBICIDE PROGRAM 
+(1 soluble packet treats 2 acres) 
+RAPTOR DG may be applied postemergence at a broadcast rate of 0.73 ounces per acre when preceded with a full rate of a 
+registered soil applied grass herbicide like PROWL 3.3 EC. At this rate 1 soluble packet (1.82 ounces of product) will treat 
+2.5 acres. RAPTOR DG may be applied postemergence at a broadcast rate of 0.91 ounces per acre (including minimum and 
+no-till). At this broadcast rate, one soluble packet of RAPTOR DG will treat 2 acres of soybeans. 
+NOTE: Only one application of RAPTOR DG may be made during the season.
+
+10 
+WEEDS CONTROLLED 
+When applied as directed, Raptor® DG herbicide will control or suppress the weeds listed below as indicated. Refer to the 
+MIXING INSTRUCTIONS section for recommendations when weeds are at the maximum recommended growth stage, or 
+are under stress. 
+BROADLEAF WEEDS CONTROLLED USING A SEQUENTIAL* PROGRAM 
+* Soil applied grass herbicide such as PROWL 3.3 EC herbicide followed by a postemergence application of RAPTOR DG 
+herbicide at a broadcast rate of 0.73 ounces per acre. 
+(1 packet RAPTOR DG per 2.5 acres) 
+BROADLEAF WEEDS RECOMMENDED HEIGHT (inches) 
+Artichoke, Jerusalem 3-8 
+Carpetweed 2-4 
+Chickweed, common 2-5 
+Cocklebur, common 2-8 
+Jimsonweed 2-6 
+Kochia 1-4 
+Lambsquarters, common 2-5 
+Mustard spp. 2-8 
+Nightshade, 
+black 
+Eastern black 
+hairy 
+ 
+2-5 
+2-5 
+2-5 
+Pigweed, 
+Palmer amaranth** 
+prostrate 
+redroot 
+smooth 
+spiny 
+ 
+2-4 
+2-5 
+2-8 
+2-8 
+2-5 
+Purslane, common 1-3 
+Pusley, Florida 2-4 
+Radish, wild 2-4 
+Ragweed, giant 2-5 
+Smartweed, 
+ladysthumb 
+Pennsylvania 
+ 
+2-5 
+2-5 
+Spurge, annual 2-4 
+Sunflower 2-8 
+Velvetleaf 2-8 
+Waterhemp,** 
+tall 
+common 
+ 
+2-5 
+2-5 
+ 
+** Control of light to moderate populations only. For control of heavier populations see the HERBICIDE COMBINATION 
+section
+
+11 
+BROADLEAF WEEDS SUPPRESSED USING A SEQUENTIAL PROGRAM 
+BROADLEAF WEEDS RECOMMENDED HEIGHT (inches) 
+Bindweed 
+field (seedling) 
+hedge (seedling) 
+ 
+2-4 
+2-4 
+Mallow, Venice* 1-4 
+Morningglory, 
+entireleaf* 
+ivyleaf* 
+pitted 
+smallflower* 
+tall* 
+ 
+2-4 
+2-4 
+2-4 
+2-4 
+2-4 
+Ragweed, common* 2-5 
+Sida, prickly 2-4 
+Sowthistle, annual 2-5 
+Thistle, Canada 2-5 
+ 
+* For control see the 0.91 ounce rate and HERBICIDE COMBINATION section.
+
+12 
+GRASS WEEDS CONTROLLED USING A SEQUENTIAL PROGRAM 
+GRASS WEEDS RECOMMENDED HEIGHT (inches) 
+Barley, wild 2-4 
+Barnyardgrass 2-5 
+Crabgrass, 
+large 
+smooth 
+ 
+2-4 
+1-4 
+Crowfoot grass 2-5 
+Cupgrass, woolly 2-4 
+Foxtail, 
+giant 
+green 
+yellow 
+ 
+2-6 
+2-6 
+2-6 
+Goosegrass 2-5 
+Johnsongrass, seedling 4-8 
+Millet, wild proso 2-4 
+Oats, wild 2-4 
+Panicum, 
+fall 
+Texas 
+ 
+2-6 
+2-6 
+Sandbur, field* 2-5 
+Shattercane 2-8 
+Signalgrass, broadleaf 2-5 
+Volunteer corn** 2-8 
+Volunteer wheat 2-4 
+Witchgrass 2-5 
+ 
+* For control a dinitroaniline (DNA) herbicide such as PROWL 3.3 EC herbicide must be soil applied at a full labeled rate. 
+** Except imidazolinone tolerant corn.
+
+13 
+GRASSES AND SEDGES SUPPRESSED USING A SEQUENTIAL PROGRAM 
+WEEDS RECOMMENDED HEIGHT (inches) 
+GRASSES 
+Itchgrass 2-5 
+Johnsongrass, rhizome 6-12 
+Quackgrass 4-8 
+Red rice 2-5 
+SEDGES 
+Nutsedge, 
+purple 
+yellow 
+ 
+1-3 
+1-3
+
+14 
+BROADLEAF WEEDS CONTROLLED USING RAPTOR DG HERBICIDE 
+POSTEMERGENCE AT A BROADCAST RATE OF 0.91 OUNCES PER ACRE 
+(1 packet per 2 acres) 
+BROADLEAF WEEDS RECOMMENDED HEIGHT (inches) 
+Artichoke, Jerusalem 3-8 
+Chickweed, common 2-5 
+Cocklebur, common 2-8 
+Jimsonweed 2-6 
+Kochia 1-4 
+Lambsquarters, common 2-5 
+Mallow, Venice 1-4 
+Morningglory, 
+entireleaf 
+ivyleaf 
+smallflower 
+tall 
+ 
+2-4 
+2-4 
+2-4 
+2-4 
+Mustard spp. 2-8 
+Nightshade, 
+black 
+Eastern black 
+hairy 
+ 
+2-5 
+2-5 
+2-5 
+Pigweed, 
+Palmer amaranth* 
+prostrate 
+redroot 
+smooth 
+spiny 
+ 
+2-4 
+2-5 
+2-8 
+2-8 
+2-5 
+Puncturevine 1-3 
+Purslane, common 1-3 
+Radish, wild 2-4 
+Ragweed, 
+giant 
+common* 
+ 
+2-5 
+2-5 
+Smartweed, 
+ladysthumb 
+Pennsylvania 
+ 
+2-5 
+2-5 
+Sunflower 2-8 
+Velvetleaf 2-8 
+ 
+* Control of light to moderate populations only. For control of heavier populations see the HERBICIDE COMBINATION 
+section.
+
+15 
+BROAD LEAF WEEDS SUPPRESSED USING RAPTOR DG HERBICIDE 
+POSTEMERGENCE AT A BROADCAST RATE OF 0.91 OUNCES PER ACRE 
+(1 packet per 2 acres) 
+BROADLEAF WEEDS RECOMMENDED HEIGHT (inches) 
+Morningglory, 
+pitted 
+ 
+2-4 
+Bindweed 
+field (seedling) 
+hedge (seedling) 
+ 
+2-4 
+2-4 
+Sida, prickly 2-4 
+Sowthistle, annual 2-4 
+Thistle, Canada 2-5
+
+16 
+GRASS WEEDS CONTROLLED USING RAPTOR DG HERBICIDE POSTEMERGENCE 
+AT A BROADCAST RATE OF 0.91 OUNCES PER ACRE 
+(1 packet per 2 acres) 
+GRASS WEEDS RECOMMENDED HEIGHT (inches) 
+Barley, wild 2-4 
+Barnyardgrass* 2-5 
+Foxtail, 
+giant 
+green 
+yellow 
+ 
+2-6 
+2-6 
+2-6 
+Johnsongrass, seedling 4-8 
+Millet, wild proso* 2-4 
+Oats, wild 2-4 
+Panicum, fall 2-6 
+Shattercane 2-8 
+Signalgrass, broadleaf* 2-5 
+Volunteer corn** 2-8 
+Volunteer wheat 2-4 
+ 
+* Control of light to moderate populations only. For control of heavier populations use a SEQUENTIAL APPLICATION 
+with a soil applied grass herbicide as described above. 
+** Except imidazolinone tolerant corn. 
+ 
+ 
+GRASS WEEDS AND SEDGES SUPPRESSED USING RAPTOR DG POSTEMERGENCE 
+AT A BROADCAST RATE OF 0.91 OUNCES PER ACRE 
+(1 packet per 2 acres) 
+WEEDS RECOMMENDED HEIGHT (inches) 
+GRASSES 
+Crabgrass, 
+large 
+smooth 
+ 
+2-4 
+2-4 
+Cupgrass, woolly 2-4 
+Goosegrass 2-4 
+Johnsongrass, rhizome 6-12 
+Quackgrass 4-8 
+Stinkgrass 2-4 
+SEDGES 
+Nutsedge, 
+purple 
+yellow 
+ 
+1-3 
+1-3
+
+17 
+HERBICIDE COMBINATIONS 
+GRASS WEEDS 
+Use a soil applied grass herbicide (such as PROWL 3.3 EC) if heavy infestations of some grass weeds exist or if Raptor® 
+DG herbicide does not control the species present. Refer to the PROWL 3.3 EC (or other grass herbicide) label for specific 
+use recommendations, rates and precautions. 
+If a selective postemergence grass herbicide such as PRESTIGE7, Poast Plus7, Fusilade8 2000, Fusilade8 DX, Fusion8, 
+Assurel, Select9 or Option9 is mixed with RAPTOR DG to control species that are not controlled with RAPTOR DG alone, 
+SUN-IT II (1.5 - 2 pints per acre) or a crop oil concentrate (2 pints per acre) AND liquid fertilizer (1-2 quarts per acre) 
+should be added to the tank-mixture. In some cases the activity of the grass herbicide may be reduced when mixed with 
+RAPTOR DG. The reduction in activity may be overcome by delaying the application of the postemergence grass herbicide 
+7 days following the application of RAPTOR DG. If the grass herbicide is applied first, wait 3 days before applying 
+RAPTOR DG. Refer to the respective grass herbicide label for recommended application rate, weed size and restrictions. 
+BROADLEAF WEEDS 
+Tank-mixing RAPTOR DG and broadleaf herbicides can reduce grass control, so a sequential program including a soil 
+applied grass herbicide such as PROWL 3.3 EC is recommended for optimal control. 
+Enhanced Control of common ragweed, Palmer amaranth, and waterhemp. 
+Use a soil applied application of PROWL 3.3 EC herbicide followed by a postemergence application of RAPTOR DG at a 
+broadcast rate of 0.73 to 0.91 ounces per acre plus a diphenylether such as STATUS7 (acifluorfen) for enhanced control of 
+common ragweed, Palmer amaranth and waterhemps. Refer to the PROWL 3.3 EC and STATUS labels for specific use 
+recommendations, rates and precautions. 
+When tank-mixing RAPTOR DG and STATUS, apply RAPTOR DG at a broadcast rate of 0.91 ounces per acre or 0.73 
+ounces per acre when preceded by a full rate of a registered soil applied grass herbicide. Apply STATUS at the following 
+rates depending on weed height: 
+STATUS Rate (ounces per acre):* 
+Weed 8-10 oz. 12-14 oz. 16-20 oz. 
+Ragweed, common 2-4" 4-6" 6-8" 
+Palmer amaranth 2-4" 4-6" 6-8" 
+Waterhemp spp. 2-4" 4-6" 6-8" 
+* Use the higher rate if common ragweed is present or the weed population is high. 
+When applying STATUS following a RAPTOR DG application, apply STATUS at the following rates: 
+STATUS Rate (ounces per acre):* 
+Weed 10-12 oz. 14-16 oz. 18-24 oz. 
+Ragweed, common 2-4" 4-6" 6-8" 
+Palmer amaranth 2-4" 4-6" 6-8" 
+Waterhemp spp. 2-4" 4-6" 6-8" 
+* Use the higher rate if common ragweed is present or the weed population is high.
+
+18 
+ROTATIONAL CROPS 
+The following rotational crops may be planted after applying up to 0.91 ounces per acre of Raptor® DG herbicide in 
+soybeans: 
+1. Anytime 
+Soybeans 
+2. Three months after a RAPTOR DG application: 
+Wheat 
+3. Four months after a RAPTOR DG application: 
+Barley 
+Rye 
+4. Nine months after a RAPTOR DG application: 
+Alfalfa Edible Beans Pumpkin 
+Broccoli Grain Sorghum Rice 
+Cabbage Oat Squash 
+Cantaloupe Onion Sunflower 
+Carrot Pea Tobacco 
+Corn (field, pop, seed, sweet) Peanut Tomato 
+Cotton Pepper Turnip 
+Cucumber Potato Watermelon 
+5. Eighteen months after a RAPTOR DG application: 
+Sugar beet and table beet if the soil pH is uniformly 6.2* or greater 
+All other crops including canola 
+6. Twenty-six months after a RAPTOR DG application: 
+Sugar beet and table beet if the soil pH is less than 6.2*. 
+* Sugar beet yields can be reduced when grown in soil conditions with a pH less than 6.5. If the soil is limed to adjust the soil 
+pH, apply the lime at least 18 months prior to planting sugar beet or other rotational crops under the 18 month rotational 
+interval. 
+Use of RAPTOR DG herbicide in accordance with label directions is expected to result in normal growth of rotational crops 
+in most situations; however, various environmental and agronomic factors, such as arid conditions, make it impossible to 
+eliminate all risks associated with the use of this product and, therefore, rotational crop injury is always possible.
+
+19 
+PRECAUTIONS 
+DO NOT make more than one application per growing season. 
+Only rotational crops harvested at maturity may be used for feed or food. 
+There should be an interval of at least 85 days between an application of Raptor® DG herbicide and soybean harvest. 
+RAPTOR DG applications must be made before soybean bloom. 
+DO NOT graze or feed treated soybean forage, hay or straw to livestock. 
+If soybeans are furrow irrigated, till the soil prior to planting winter wheat or barley. The beds should be broken up and the 
+soil mixed with tillage equipment set to cut 4-6 inches deep. 
+Except where stated on a Supplemental Label or in this label, DO NOT apply products containing chlorimuron ethyl (Classic, 
+Canopy1, Synchrony1, Gemini1, Lorox Plus1, Preview1, etc.), flumetsulam (Broadstrike + Dual2, Broadstrike + 
+TREFLAN4), imazaquin (SCEPTER®, SQUADRON®, TRI-SCEPT®, SCEPTER® O.T.®, SCEPTER® 70DG, STEELTM 
+or DETAIL®), imazethapyr (PURSUIT®, PURSUIT® DG, PURSUIT® PLUS, PASSPORT®), or RAPTOR herbicide the 
+same year as RAPTOR DG herbicide or injury to rotational crops may occur. 
+If arid conditions occur during the year of application rotational crop injury may occur. 
+In the event of a crop loss due to weather, soybeans can be replanted. 
+1 Accent, Basis, Classic, Concert, Pinnacle, Staple Synchrony, Assure, Lorox Plus, Canopy, Gemini, and Preview are 
+trademarks of E.I. duPont de Nemours & Co., Inc. 
+2 Dual and Exceed are trademarks of Ciba Geigy Corporation. 
+3 Permit is a trademark of Monsanto Agricultural Company. 
+4 Broadstrike and TREFLAN are trademarks of DowElanco. 
+5 SUN-IT II is a trademark of Agsco, Inc. 
+6 Spra-Coupe is a trademark of Melroe Agricultural Products. 
+7 Poast Plus, PRESTIGE, and STATUS are trademarks of BASF Corporation. 
+8 Fusilade 2000, Fusilade DX, and Fusion are trademarks of Zeneca, Inc. 
+9 Select is a trademark of Valent Chemical Co. 
+10 Option is a trademark of AgrEvo USA Company. 
+®/TMTrademarks of BASF Corporation. 
+For additional information regarding the use of RAPTOR DG herbicide, call telephone no. 1-800-832-HELP (4357). 
+ 
+© 2025 BASF Corporation 
+All rights reserved. 
+ 
+000241-00380.20200408c.NVA 2020-04-133-0060 
+ 
+BASF Corporation 
+26 Davis Drive 
+Research Triangle Park, NC 27709