docker: production image + Gitea Actions for monthly refresh

Dockerfile: self-contained image with corpus + Chroma + BM25 baked
in. Drawbar's compose pulls + runs without volume mounts. Built from
sources.json (labels schema), PRODUCT_NAME=crop_chem by default,
HYBRID_SEARCH=true (always-on for production quality). RERANK_URL +
OLLAMA_URL get set at compose time.

.gitea/workflows/refresh.yml: monthly cron (1st @ 06:00 UTC) does
full scrape → reindex → image push. Scrapes Bayer (~30 min) +
EPA PPLS row-crop filtered (~7h). Skips reindex+push if no corpus
diff. Tags pushed: :latest, :<sha12>, :corpus-<YYYY.MM.DD>.

.gitea/workflows/image-only.yml: on-demand or auto on code-only
pushes to main (paths: docs_mcp/, rag/, scrape/, requirements.txt,
Dockerfile, sources.json). Reindexes from committed corpus, builds
image, pushes. ~10 min vs ~9h full refresh.

.gitignore: corpus/ now COMMITTED (4,159 labels, 265 MB of .md +
sidecars). Lets image-only.yml rebuild indexes without re-scraping.
chroma/ + bm25/ still gitignored (regenerable binary indexes).

.dockerignore: drops venv, eval results, PLAN/README/CLAUDE.md,
deploy/, .git/ — keeps the image lean. corpus + chroma + bm25
explicitly NOT in dockerignore (those go INTO the image).

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

corpus/epa_ppls/279-3182.md

@@ -0,0 +1,609 @@
+# AIM 50 DF HERBICIDE
+
+- EPA Reg No: **279-3182**
+- Registrant: FMC CORPORATION 
+- Signal word: Caution
+- Active ingredients: Carfentrazone-ethyl (50%)
+- Label accepted: 1999-01-21
+- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000279-03182-19990121.pdf
+
+---
+( 
+·'!A'2]. 
+Code 1572 Net Contents 
+AimTM 50DF 
+Herbicide 
+For Agricultural or Commercial Use Only 
+EPA Reg. No. 279-3182 EPA Est. 279-
+Active Ingredient: By Wt. 
+Carfentrazone-ethyl: Ethyl a.2-dichloro-5-[4-(difluoromethyl)-
+4.5-dihydro-3-methyl-5-oxo-1 H-1 ,2,4-triazol-1-yl]-4-
+fluorobenzenepropanoate ....................................... . 
+Inert Ingredients: ............... , .............. " ................. , ... " .. 
+Contains 40% WNV of active ingredient per pound of product 
+U.S. Patent NO.5. 125,958 
+50.0% 
+50.0% 
+100.0% 
+KEEP OUT OF REACH OF CHILDREN 
+CAUTION 
+STATEMENT OF PRACTICAL TREATMENT 
+If Inhaled: Remove to fresh air. If not breathing, give artificial respiration, 
+lreferably mouth-to mouth. Get medical attention. 
+If Swallowed: Call a medical doctor or POison Control Center. Drink 1 or 
+2 glasses of water and induce vomiting by touching the back of the throat 
+with a finger or by giving syrup of ipecac. Do not indtlce vomiting or give 
+anything by mouth to an unconscious person. 
+If on Skin: Wash with plenty of soap and water. Get medical attention if 
+irritation occurs and persists. 
+If In Eyes: Flush with plenty of water. Contact a medical doctor if 
+irritation persists. 
+Note to Medical Doctor: Carfentrazone-ethyl 50DF is expected to have 
+low oral and dermal toxicity, and moderate inhalation toxicity. It is 
+expected to be slightly irritating to the skin and minimally irritating to the 
+eyes. This product contains a granular material (sand) that may cause 
+mechanical irritation to the eyes. Treatment is otherwise controlled 
+removal of exposure followed by symptomatic and supportive care. 
+Emergency Assistance Call COllecl: (800) 331-3148 
+See other panels for additional recautiona Infonnatlon. 
+CCEPTED 
+.WJ21a 
+v .... the F-..alt-ce:t'dde 
+rnrgfdde cmcl RocfnHdde Act. 
+mI am ad_ far t1w Pl .... ctde ' 
+~= 
+-=MC Corporation 
+Agricultural Products Group 
+Philadelphia PA 19103 
+10/98 
+, , 
+PRECAUTIONARY STATEMENTS 
+Hazards to Humans (and Domestic Animals) 
+Caution 
+Harmful if swallowed, absorbed through the skin or inhaled. Causes 
+moderate eye irritation. Avoid breathing dust. Avoid contact with eyes, skin 
+or clothing. Wash thoroughly with soap and water after handling. 
+Personal Protective Equipment (PPE) 
+Applicators and other handlers must wear: long-sleeved shirt and long 
+pants, waterproof gloves, and shoes plus socks. 
+Discard clothing and other absorbent materials that have been drenched 
+or heavily contaminated with this product. Do not reuse them. Follow 
+manufacturer's instructions for cleaning/maintaining PPE. If no such 
+instructions for washables, use detergent and hot water. Keep and wash 
+PPE separately from other laundry. 
+User Safety Recommendations: 
+Users should: 
+• Remove clothing immediately if pesticide gets inside. Then 
+wash thoroughly and put on clean clothing. 
+Environmental Hazards 
+Carfentrazone-ethyl is very toxic to algae and moderately toxic to fish. Do 
+not apply directly to water, to areas where surface water is present or to 
+intertidal areas below the high water mark, except as specified on this 
+label. Do not contaminate water when disposing of equipment 
+washwaters. 
+Physica[/Chemical Hazards 
+Do not use or store near heat or open flame. 
+. 
+DIRECTIONS FOR USE 
+It is a violation of Federal law to use this product in a manner inconsistent 
+with its labeling. 
+Do not apply this product through any type of irrigation system. 
+Do not apply this product in a way that will contact workers or other 
+persons, either directly or through drift. Only protected handlers may be in 
+the area during application. For any requirements specific to your State or 
+Tribe, consult the agency responsible for pesticide regulation. 
+AGRICULTURAL USE REQUIREMENTS 
+Use this product only in accordance with its labeling and with the 
+Worker Protection Standard, 40 CFR part 170. This Standard 
+contains requirements for the protection of agricultural workers on 
+farms, forests, nurseries, and greenhouses, and handlers of 
+agricultural pesticides. It contains requirements for training, 
+decontamination, notification, and emergency assistance. It also 
+contains specific instructions and exceptions pertaining to the 
+statements on this label about personal protective equipment 
+(PPE), and restricted-entry interval. The requirements in this box 
+only apply to uses of this product that are covered by the Worker 
+Protection Standard, 
+Do not enter or allow worker entry into treated areas during the 
+restricted entry interval (REI) of 12 hours. 
+PPE required for early entry to treated areas that is permitted under 
+the Worker Protection Standard and that involves contact with 
+anything that has been treated, such as plants, soil, or water, is: 
+Coveralls, waterproof gloves, and shoes plus socks.
+
+STORAGE AND DISPOSAL 
+Pesticide Storage 
+Not for use or storage in or around the house. 
+Keep out of reach of children and animals. Store in original containers 
+only. Store in a cool, dry place and avoid excess heat. Carefully open 
+containers. After partial use, replace lids and close tightly. Do not put 
+granule or dilute material into food or drink containers. Do nol 
+contaminate other pesticides. fertilizers, water, food, or feed by 
+inappropriate storage or disposal. 
+In case of spill, avoid contact, isolate area and keep out unprotected 
+persons and animals. Confine spills, Call FMC: (800) 331·3148. 
+To confine spill: Dike surrounding area, sweep up spillage. Dispose of 
+in accordance with information given under Pesticide Disposal. Wash 
+spill area with water, absorb with sand, cat litter or commercial clay, 
+sweep up and dispose of in an approved manner. Place damaged 
+container in a larger holding container. Identify contents per required 
+hazardous waste labeling regulations. 
+Pesticide Disposal 
+Waste resulting from the use of this product may be disposed of at an 
+approved waste disposal facility. 
+Container Disposal 
+Plastic containers: Triple rinse (or equivalent). Then offer for approved 
+pesticide container recycling program, or puncture and dispose of in an 
+approved waste disposal facility. Provided on site incinaration is 
+allowed by state and local authorities, stay out of smoke. 
+GENERAL INFORMATION 
+Aim Herbicide is a water dispersable granule formulation. It is designed to be 
+mixed with wa.ter and applied to corn (field, seed, popcorn, and silage), grain 
+sorghum, soybeans, wheat. barley, and oats for selective postemergence 
+control of broadleaf weeds. Weed control is best when the product is appUed to 
+small actively growing weeds (1-4 inches in height). Aim is a contact herbicide 
+with little or no residual activity at recommended use rates. 
+Aim is rapidly absorbed through the foliage of plants. The herbicide is rain fast 
+within one hour after application. Within a few hours following application, the 
+foliage of susceptible weeds show signs of dessication, and in subsequent 
+jays necrosis and death of the plant. Due to environmental conditions and 
+certain spray tank additives, some herbicidal symptoms may appear on the 
+crop. However, the crop recovers quickly with no loss in yield. 
+Extremes in environmental conditions e.g. temperature and moisture, soil 
+conditions, and cultural practices may affect the activity of Aim. Under warm 
+moist conditions, herbicide symptoms may be accelerated. Whlle under very 
+dry conditions, the expression of herbicide symptoms is delayed, and weeds 
+hardened off by drought are less susceptible to Aim. 
+Unless specified on this label, do not tank mix Aim with EC formulations of 
+other crop protection products or with crop oil concentrate as excessive crop 
+injury may occur. Under very dry soil moisture conditions, the use of crop oil 
+concentrate (1% vlv or 1 gallon per 100 gallon spray solution) may be used to 
+improve weed control. However, the use of crop oil concentrate may increase 
+crop response. 
+Mixing and Loading Instructions: 
+Fill the spray tank 3/4 full with clean water. Make sure the agitation system is 
+operating. Add the recommended amount of Aim and complete filling the spray 
+tank to the desired level. The spray tank agitation should be sufficient 10 
+ensure uniform spray mixture during application. When tank mixing with other 
+products, Aim should be mixed first in the spray tank. After the product is 
+thoroughly mixed, add the other products as specified on their label. Ensure 
+the compatibility of other products with Aim before mixing them together in the 
+spray tank. 
+Do not use with tank additives that alter the pH of the spray solution below 
+pHS or above pH 8. Buffer spray solution to ~Ite~ the P~ r~~g,e as appropriate. 
+Ground Applications: 
+For best spray distribution and coverage, s~e-Iec' a: spray vo)ume and delivery 
+system that wi!! ensure accurate and unifOfm U)vera-~o. "-.:t.a a standard boom 
+sprayer equipped with appropriate nozzles, tips, and screens. Use flat fan 
+nozzle tips and in-line strainers equipped with no finer than 50 mesh screens. 
+Do not use flood nozzles, RaindrvP@, tor nozzle'lips larger than 8000: Cpray 
+droplets larger than 400 microns m:--y r'3:1uce cO'fer,l.ge and sub{:teq'Jent loss in 
+'lieeO control. Applications shou\~ be'mtode usir.iJ finished '~pf.ay' oIoIu.nes of 
+j 0-20 gallons per acre. Use higher sprat' volume$: when there is ~ aensr 'weed 
+population or crop canopy. Use spray pressures of 30-40 psi. 
+00 not apply when conditions are conducive to spray drift or poor spray 
+coverage. 
+2 
+20 f J 
+Before using sprayer equipment exposed to Aim, clean 
+equipment thoroughly using the following procedure: 
+1. Drain sprayer tank, hoses, and boom and thoroughly rinse the inside 
+of the sprayer tank free of visible sediment and residues. Flush through 
+sprayer hoses, boom and nozzles. 
+2. Fill the tank 1/2 full with clean water, and add appropriate detergent 
+(follOW manufacturer's directions for use). FiJI the tank to capacity and 
+operate the sprayer for 15 minutes to flush hoses, boom and nozzles. 
+3. Drain the sprayer system. Rinse the tank with clean water and flush 
+through the hoses and boom. Remove and clean nozzles separately. 
+Aerial Spray Drift Management 
+The following language must be placed on each product label that can 
+be applied aerially: 
+SPRAY DRIFT MANAGEMENT 
+AVOIDING SPRAY DRIFT AT THE APPLICATION SITE IS THE. 
+RESPONSIBILITY OF THE APPLICATOR AND THE GROWER. 
+The interaction of many equipment-and-weather-related factors 
+determine the potential for spray drift. The applicator and the grower 
+are responsible for considering all these factors when making 
+decisions. 
+The following drift management requirements must be followed to 
+avoid off-target movement from aerial applications to agricultural field 
+crops. These requirements do not apply te forestry applications, public 
+health uses or to applications using dry formulations. 
+1. The distance of the outer most nozzles on the boom must 
+not exceed 3/4 the length of the wingspan or rotor. 
+2. Nozzles must always point backward paral1el with the air 
+stream and never be pointed downwards more than 45 
+degrees. 
+Where states have more stringent regulations, they should be 
+observed. 
+The applicator should be familiar with and take into account the 
+information covered in the Aerial Drift Reduction Advisory. 
+Aerial Drift Reduction Advisory Information 
+The following aerial drift advisory information must be contained in the 
+product labeling: 
+[This sec~on is advisory In nature and does not supersede the 
+mandatory label requirements.] 
+INFORMATION ON DROPLET SIZE 
+The most effective way to reduce drift potential is to apply large 
+droplets. The best drift management strategy is to apply the largest 
+droplets that provide sufficient coverage and control. Applying larger 
+droplets reduces drift potential, but will not prevent drift if applications 
+are made improperly, or under unfavorable environmental conditions 
+(See Wind, Temperature and Humidity, and Temperature In'Jersions). 
+CONTROLLING DROPLET SIZE 
+Volume - Use high flow rate nozzles to apply the highest practical 
+spray volume. Nozzles w"h higher rated flows produce larger droplets. 
+Pressure - Do not exceed the nozzle manufacturer's recommended 
+pressures. For many nozzle types lower pressure produces larger 
+droplets. When higher flow rates are needed, use higher flow rate 
+nozzles instead of increasing pressure. 
+Number of nozzles - Use the minimum number of nozzles that 
+provide uniform coverage. 
+Nozzle Orientation - Orienting nozzles so that the spray is released 
+parallel to the airstream produces larger droplets than other 
+orientations and is the recommended practice. Significant deflection 
+from horizontal will reduce droplet size and increase drift potential. 
+Nozzle Type - Use a nozzle type that is designed for the intended 
+application. With most nozzle types, narrower spray angles produce 
+larger droplets. Consider using low drift nozzles. Solid stream nozzles 
+oriented straight back produce the largest droplets and the lowest drift. 
+BOOM LENGTH 
+For some use patterns, reducing the effective boom length to less than 
+314 of the wingspan rotor length may further reduce drift without 
+reducing swath width.
+
+( 
+Aerial Spray Drift Management (continued) 
+APPLICATION HEIGHT 
+Applications should not be made at a height greater than 10 feet above 
+the top of the target plants unless a greater height is required for aircraft 
+safety. Making applications at the lowest height that is safe reduces 
+exposure of droplets to evaporation and wind. 
+SWATH ADJUSTMENT 
+When applications are made with a crosswind. the swath will be 
+displaced downwind. Therefore, on the up and downwind edges of the 
+field. the applicator must compensate for this displacement by adjusting 
+the path of the aircraft upwind. Swath adjustment distance should 
+increase, with increasing drift potentia! (higher wind, smaller drops, etc.) 
+WIND 
+Drift potential is lowest between winds speeds of 3- 10 mph. However, 
+many factors, induding droplet size and equipment type determine drift 
+potential at any given speed. Application should be avoided below 3 mph 
+due to variable wind direction and high inversion potential. NOTE: Local 
+terrain can influence wind patterns. Every applicator should be familiar 
+with local wind patterns and how they affect spray drift. 
+TEMPERATURE AND HUMIDITY 
+When making applications in low relative humidity, set up equipment to 
+produce larger droplets to compensate for evaporation. Droplet 
+evaporation is most severe when conditions. are both hot and dry. 
+TEMPERATURE INVERSIONS 
+Applications should not occur during a temperature inversion because 
+drift potentia! is high. Temperature inversions restrict Vertical air mixing, 
+which causes small suspended droplets to remain in a concentrated 
+cloud. This cloud can move in unpredictable directions due to the light 
+variable winds common during inversions. Temperature inVersions are 
+characterized by increasing temperatures with altitude and are common 
+on nights with limited cloud cover and light to no wind. They begin to form 
+as the sun sets and often continue into the morning. Their presence can 
+'le indicated by ground fog; however, if fog is not present, inversions can 
+J)so be identified by the movement of smoke from a ground source or an 
+aircraft smoke generator. Smoke that layers and moves laterally in a 
+concentrated cloud (under low wind conditions) indicates an inversion, 
+while smoke that moves upward and rapidly dissipates indicates good 
+vertical air mixing. 
+SENSITIVE AREAS 
+The pesticide should only be applied when the wind is blowing away from 
+adjacent sensitive areas (e.g. residential areas, bodies of water, known 
+habitat for threatened or endangered species, non-target crops). 
+3 
+CORN: FIELD AND SEED, POPCORN, CORN SILAGE 
+TIMING AND METHOD OF APPLICATION 
+Apply Aim Herbicide alone or as a tank mixture with other herbicides to 
+emerged and actively growing weeds. Apply to com postemergence up to 
+B Jeaf coUar growth stage. 00 not apply when conditions favoring drift 
+exist. Do not apply more than 0.99 oz. per season. 
+For best results, apply to weeds 1 - 4 inches tall. Use tank mixes with 
+other herbicides for more mature weeds, weeds under drought stress, or 
+weeds with dense vegetative growth. 
+To control weeds not listed on this label, Aim Herbicide may be tank 
+mixed with other herbicides registered for use in corn, Refer to the other 
+product's Jabel for restrictions on tank mixing. and observe all label 
+precautions, instructions, and rotational cropping restrictions. 
+Early Postemergence (all tillage systems) 
+Aim (0.26 oz. per acre) plus 0.25% vlv nonionic surfactant (2 pints per 
+100 gal"'ns of spray solution) cuntrols the following weeds: 
+Weeds (1-4 inches tall) 
+Nightshade, Black 
+Velvetleaf (up to 361nches tall) 
+Morningglories (2-3 true leaves). 
+Ivyleaf and Pitted 
+Tank Mixtures 
+Common Lambsquarters 
+Pigweed, Redroot 
+Aim may be tank mixed with other hermcides to controJ weeds not listed 
+on this label or to control more mature weeds or dense vegetative 
+growth. Read and follow all manufacturer's label recommendations for 
+the companion herbiCide except for specific recommendations on this 
+label. Unless speCified on this label, do not tank mix Aim with EC 
+formulations of other crop protection products or with crop oil concentrate 
+as excessive crop injury may occur. When tank mixing Aim with other 
+products, be sure the Aim is mixed in the spray tank water first. 
+With adjuvants 
+Add a nonionic surfactant having at least 80% active ingredient strength 
+at 0.25% vlv (2 pints per 100 gallons of spray solution). Under very dry 
+conditions the use of a crop oil concentrate may improve weed control. 
+The use of a crop oil concentrate may increase leaf speckling on the 
+treated leaves of corn. 
+With Atrazine 
+Aim (0.26 oz. per acre) may be tank mixed with Atrazine 4L (16 fl. 
+oz.lacre) or Atrazine gOOF (9 oz per acre) to control the following weeds: 
+Weeds (1:4 jnChes ta1l) 
+Amaranth, Palmer 
+Amaranth, Spiny 
+BufJalobur 
+Carpetweed 
+Cocklebur, Common 
+Croton, Wally 
+Oevitscfaw 
+Eveningprimrose, Cutleaf 
+Hophombean Copperleaf 
+Jimsonweed 
+Lambsquarters, Common 
+Morningglory, Entireleaf 
+Morningglory, Ivyieaf 
+Momingg/ory, Pitted 
+Momingglory, Scarlet 
+Morningglory, Tall 
+·Suppression or partial control 
+Nightshade, Eastern Black 
+Nightshade, Silverleaf 
+Pigweed, Redroot 
+Pigweed, Smooth 
+Pigweed, (Triazine resistant) 
+Purslane, common 
+·Ragweed, Common 
+Sesbania, Hemp 
+·Smartweed, annual 
+Spurred Anoda 
+Velvetleaf 
+Venice Mallow 
+Waterhemp, Common 
+Waterhemp, Tall 
+6Ragweed, Giant 
+·Sunflower, Wild
+
+For giant and common ragweeds, annual smartweeds, and wild 
+sunflower 
+Aim plus atrazine can be tank mixed with 2,40, Banve'" or Clarity® 
+herbicides for control of giant and common ragweeds, annual smartweeds 
+and wild sunflower. Add 2,40 (amine) to the lank mix at 0.125 - 0.25 lb. 
+lctive ingredient per acre or Banvert' or ClarityCl at 3-4 fl oz. per acre. 
+rligher rates of Atrazine, Banve1 or Clarity herbicides can be used, but do 
+not exceed the recommended label use rates allowed by these labels. 
+Add a 0.25% vlv nanionic surfactant (2 pints per 100 gal) to the tank 
+mixture, or under very dry soil moisture conditions, the use of crop oil 
+concentrate (1% vlv or 1 gaUon per 100 gallon spray solution) may 
+improve weed control. However, the use of crop oil concentrate may 
+increase crop response. 
+With Banver or Clarity" 
+Aim (0.26 oz per acre) plus 0.25% vlv nonionic swrfactant (2 pints per 100 
+gal) can be tank mixed with Banvel* or Clarity herbicides (8 fI OZ per 
+acre) for control of general broad/eaf weeds including the following: 
+Weeds 11- 4 inches tal!) 
+Cocklebur, common 
+Lambsquarters 
+MorninggJory, Entireleaf 
+Morningglory, \vyleaf 
+Momingglory, Pitted 
+Morningglory, Scarlet 
+Morningglory, Tall 
+Nightshade, Black 
+Pigweed, Redroot 
+Pigweed, Smooth 
+Pigweed (triazine resistant) 
+Ragweed, Common 
+Ragweed, Giant 
+Smartweed, Pennsylvania 
+Velvetleaf 
+Waterhemp, Tall and Common 
+Refer to the Banvel or Clarity labels for additional weed listings and for 
+higher use rates. 
+With other herbicides 
+For control of broadleaf and grassy weeds, Aim may be tank mixed with 
+Accents, Basis", Beacon", Exceed*, Hornet8, Marksman*, Permifll, 
+Scorpion we, Spirit*, and UbertyCl. 
+Unless specified on this label, de not use crop on concentrate, nitrogen 
+fertilizers or mix Aim with EC formulations of other herbicides in any tank 
+mix excepl as specified on this label as exce$SJve crop injury may occur. 
+Read and follow all manufacturer's label recommendations for the 
+companion herbicide except for specific recommendations on this label. 
+SOYBEANS 
+TIMING AND METHOD OF APPLICATION 
+Application of Aim Herbicide should be made after planting to emerged 
+and actively growing weeds. Aim Herbicide should be applied as a POST 
+Broadcast Over the Top treatment up to the third trifoliate soybeans. Do 
+not apply when conditions tavoring drift exist. 00 not apply more than 
+once per season. 
+For best pertormance, make application when weeds are in the 1 to 3 inch 
+leaf stage and rosettes are less than 3 inches across. Use the higher level 
+of listed rates when treating more mature w~eds Qr de:"~e vegetative 
+growth. 
+Aim 40 OF may be tank mixed with other he,bk.idf..s rJgist •• lIad for use on 
+soybeans to broaden the weed control 's~ectrUT cr"JfTI'.")ared to the 
+products alone. Observe all precautions, instructions and rotational 
+cropping guidelines of each product's label when tank mixing. 
+Rates and Number of Applicationr 
+Make a single application of 0.< 3, It. 0.26 :Ju~.ces per ao:e:::If lim 
+'-Ierbicide as a postemergence Rro::tdCl'!,sl OVer ,ttle, Top Trea\rn(-nt.: ' 
+4 
+Applications should be made using a finished volume of 10 to 40 gallons 
+of finished spray per acre. When applied as directed, Aim Will control the 
+following weeds: 
+Weeds (lJP to 4 inches tall) 
+Nightshade, Black 
+Velvetleaf 
+Hophornbean Copperleaf 
+Carpetweed 
+WHEAT 
+TIMING AND METHOD OF APPLICATION 
+Apply Aim Herbicide alone or as a tank mixture with other wheat 
+herbicides to emerged and actively growing weeds. For wheat planted in 
+the fall or spring, apply Aim postemergence to the crop up to the jointing 
+stage 01 growth. Do not apply when conditions favoring drift exist. 00 not 
+apply more than 0.99 ounces per season. 
+For best results, apply to weeds less than 4 inches tall. Use the higher 
+rates for more mature weeds, weeds under drought stress, or weeds with 
+dense vegetative growth. Add a high quality sprayable liquid nitrogen 
+fertilizer at 2-4% v/v or 2-4 gal per 100 gal spray solution. Aim may be 
+mixed in water or in liquid nitrogen fertilizers used as carriers. 
+When the crop and weeds are under very dry soil moisture conditions the 
+use 01 a nonionic surtactant (0.25% v/v) in addition to the liquid nitrogen 
+fertilizer (2-4'% vfv) may be used. 
+In Texas, Oklahoma, and New Mexico, use a nonionic surfactant 0.25% 
+vfv (32 II. oz. per 100 gallons of spray solution) having at least 80%, active 
+ingredient. When wheat is grown in these states under very dry soil 
+moisture conditions, a high quality sprayable liquid nitrogen fertilizer (2-
+4% vlv or 2-4 gallons per 100 gallons spray solution) may be used in 
+addition to the nonionic surtactant. 
+To control weeds not listed on this label, Aim may be tank mixed with 
+other herbicides registered for use in wheat. Refer to the other product's 
+Jabel for restrictions on tank mixing, and observe all label precautions, 
+instructions, and rotational cropping restrictions. 
+Use Rates 
+Aim (0.74 to 0.99 oz per acre) controls the following weeds: 
+Weeds (up to 4 inches) 
+0,74 oz of oroduct per acre 
+Bedstraw, Catchweed 
+Flixweed 
+Lambsquarters 
+Mustard, Tansy 
+Nightshade, Black 
+Pennycress, Field 
+Pigsweeds 
+Wallflower, Bushy 
+·0 99 ounces per acre 
+Blttercress 
+Buckwheat, Wild 
+Filaree, Redstem 
+Kochia 
+Mustard, Tumble 
+Mustard, Wild 
+Rapeseed, Volunteer 
+Shepherdspurse 
+Sowthistle, Annual 
+Thistle, Russian 
+.. This rate controls all weeds listed under both columns. 
+Tank Mixtures 
+Aim may be tank mixed with other herbiCides to control weeds not listed 
+on this label or to control more mature weeds or dense vegetative growth. 
+Read and follow all manufacturer's label recommendations for the 
+companion herbicide except for specific recommendations on this label. 
+Unless specified on this label, do not tank mix Aim with EC formulations of 
+other herbicides or with crop oil concentrate as excessive crop injury may 
+occur. When tank mixing Aim with other products, be sure the Aim is 
+mixed in the spray tank solution first. 
+With liqUid nitrogen fertU/zers 
+Add a high quality sprayable grade nitrogen fertilizer (liquid nitrogen 
+fertilizer at 2-4% vlv or 2-4 gal per 100 gal of spray solution or ammonium 
+sulfate at 2-4 Ib per acre) to the spray mixture. When liquid fertilizer is 
+used as the carrier, slurry the Aim in water, and add it to the fertilizer 
+solution.
+
+( 
+With 2,40 (amine) or MCPA (amine) 
+Aim (0.74-0.99 ounces per acre) may be lank mixed with 2,40 or MCPA 
+for use on wheat. For best results add 2,40 to the tank at 0.25 Ib acid 
+equivalent per acre or MCPA al 0.375 Ib acid equivalent per acre. Higher 
+rates of these herbicides can be used, but do not exceed the 
+"ecommended label use rates allowed by these labels. Add nitrogen 
+lertilizer (2-4% v/v 2-4 gal per 100 gal or ammonium sulfate 4 Ib per acre) 
+to the tank mixture. When applied as directed, Aim in tank mixtures with 
+2,40 or MCPA herbicides will control the following weeds: 
+Weeds (up to 4 inches)'" 
+Bedstraw, Catchweed 
+Buckwheat, Wild 
+Bushy Wallflower 
+Croton, Woolly 
+Evening Primrose, Gulleaf 
+Fiddleneck 
+uFlixweed 
+Gromwell, Common 
+Groundsel, Common 
+*Knotweed, Prostrate 
+Kochia (including Kochia resistant 
+to other herbicides) 
+Lambsquarters, Common 
+Lettuce, Minors 
+Lettuce, Prickly 
+**London Rocket 
+*Mustard, Blue 
+UMustard, Tansy 
+··Mustard, Tumble 
+"Mustard, Wild 
+Nightshade, Black 
+Nightshade, Silverleaf 
+"Pennycress, Field 
+uPepperweed, Greenflower 
+Pigweed, Prostrate 
+Pigweed, Redroot 
+Pigweed, Smooth 
+Pigweed, Tumble 
+Radish, Wild 
+Speedwell, Ivy leaf 
+Sowthistle 
+Sunflower, Wild 
+Tarweed, Coast 
+Thistle, Russian (including Russian 
+Thistle resistant to other herbicides) 
+Waterhemp, Tall 
+• For Knotweed control, use Aim+2,40 mix; Apply to rosette growth stage 
+(before bolting) of blue mustard. 
+UThese weeds can be treated from the rosette thru bolting growth stages. 
+With other herbicides 
+For control of broadleaf and grassy weeds. Aim plus 2,40 (amine) or 
+MCPA (amine) may be tank mixed with All,.., Amber41, Asserte, Banve~. 
+ExpressC', Finesseill, Harmony Extra~, HoelonCl,Peak®. 2,40 (amine), and 
+MCPA (amine). Unless specified on this label, do not tank mix Aim with 
+EC formulations of other crop protection products or with crop oil 
+concentrate as excessive crop injury may occur. 
+Crop Rotation for applications in corn, soybeans, and wheat 
+Any crop may be planted after 30 days following an application of Aim 
+except small grains crops that do not have a .. e"tabili:s.i19li ';I.)P tolerance. 
+Follow rotation statements on tank mix: ~rc-duc's IT thpy are more 
+restrictive. 
+5 
+Dealers Should Sell in Original Packages Only. 
+Terms of Sale or Use: On purchase of this product buyer and user agree 
+to the following conditions: 
+Warranty: FMC makes no warranty, expressed or implied, concerning 
+the use of this product other than indicated on the label. Except as so 
+warranted the product is sold as is. Buyer and user assume all risk of 
+use and/or handling and/or storage of this material when such use and/ 
+or handling and/or storage is contrary to label instructions. 
+Directions and Recommendations: Follow directions carefully. TIming 
+and method of application. weather and crop conditions. mixture with 
+other chemicals not specifically recommended and other influencing 
+factors in the use of this product are beyond the control of the seller and 
+are assumed by the buyer at his own risk. 
+Use of Product: FMC's recommendations for the use of this product are 
+based upon tests believed to be reliable. The use of this product being 
+beyond the control of the manufacturer, no guarantee. expressed or 
+implied is made as to the effects of such or the results to be obtained if 
+not used in accordance with directions or established safe practice. 
+Damages: Buyer's or user's exclusive remedy for damages for breach of 
+warranty or negligence shall be limited to direct damages not exceeding 
+the purchase price paid and shall not include incidental or consequential 
+damages. 
+Raindrop - Trademark of Delavan Corporation 
+Banvel and Clarity - Trademarks of BASF 
+Accent, Basis. Express, Finesse, and Hannony Extra - Trademarks of E.1. 
+DuPont de Nemours and Co., Inc. 
+Amber. Beacon, Exceed, Peak and Spirit - Trademarks of Novartis 
+Corporation 
+Hoelon and Liberty - Trademarks of AgrEvo USA Company 
+Hornet and Scorpion III - Trademarks of Dow AgroSciences LLC 
+Marksman - Trademark of BASF Corporation 
+Permit - Trademark of Monsanto Corporation 
+Assert - Trademark of American Cyanamid Corporation 
+oAK and Aim - Trademarks of FMC Corporation 
+(1S72-AimSOc1w • 9/30/9B·A)