docker: production image + Gitea Actions for monthly refresh
Image rebuild (skip scrape) / build (push) Failing after 1h37m12s
Image rebuild (skip scrape) / build (push) Failing after 1h37m12s
Dockerfile: self-contained image with corpus + Chroma + BM25 baked in. Drawbar's compose pulls + runs without volume mounts. Built from sources.json (labels schema), PRODUCT_NAME=crop_chem by default, HYBRID_SEARCH=true (always-on for production quality). RERANK_URL + OLLAMA_URL get set at compose time. .gitea/workflows/refresh.yml: monthly cron (1st @ 06:00 UTC) does full scrape → reindex → image push. Scrapes Bayer (~30 min) + EPA PPLS row-crop filtered (~7h). Skips reindex+push if no corpus diff. Tags pushed: :latest, :<sha12>, :corpus-<YYYY.MM.DD>. .gitea/workflows/image-only.yml: on-demand or auto on code-only pushes to main (paths: docs_mcp/, rag/, scrape/, requirements.txt, Dockerfile, sources.json). Reindexes from committed corpus, builds image, pushes. ~10 min vs ~9h full refresh. .gitignore: corpus/ now COMMITTED (4,159 labels, 265 MB of .md + sidecars). Lets image-only.yml rebuild indexes without re-scraping. chroma/ + bm25/ still gitignored (regenerable binary indexes). .dockerignore: drops venv, eval results, PLAN/README/CLAUDE.md, deploy/, .git/ — keeps the image lean. corpus + chroma + bm25 explicitly NOT in dockerignore (those go INTO the image). Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
This commit is contained in:
@@ -0,0 +1,944 @@
|
||||
# WEED-RHAP A4-MCPA HERBICIDE
|
||||
|
||||
- EPA Reg No: **5905-502**
|
||||
- Registrant: HELENA AGRI-ENTERPRISES, LLC, D/B/A HELENA CHEMICAL COMP
|
||||
- Signal word: Danger
|
||||
- Active ingredients: MCPA, dimethylamine salt (52.2%)
|
||||
- Label accepted: 2005-03-11
|
||||
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/005905-00502-20050311.pdf
|
||||
|
||||
---
|
||||
- ••• " ' •• d iM" 0" ,.".,... ~- CO 10-. 0"" Aooroved. OMB No. 2070-00"" I e",,;r .. 2·28·95
|
||||
United States § Registration opp Identifier Number
|
||||
&EPA Environmental Protection Agency Amendment
|
||||
Washington. OC 20460 .... Other
|
||||
Application for Pesticide - Section I
|
||||
1. CompanvlProduct Number 2. EPA Product Manager 3. Proposed Classification
|
||||
5905-502 o None o Restricted
|
||||
4. CompanylProduct (Nama) PM'
|
||||
Weed Rhap A4-MCPA Herbicide
|
||||
5. Name and Address of Applicant (Include ZIP Code) 6. Expedited Reveiw. In accordance with FIFRA Section 3(cI(3)
|
||||
Helena Chemical Company (bWI. mv product is similar or identical in composition and labeling
|
||||
225 Schilling Boulevard, Suite 300 to:
|
||||
Collierville, Tennessee 38017 EPA Reg. No.
|
||||
"".
|
||||
o Check if this is " new address Product Name
|
||||
Section - II
|
||||
0
|
||||
Amendment· Explain below.
|
||||
0
|
||||
Final printed labels in repsonse to
|
||||
NOII~C.~.llgN Agency letter da'ted
|
||||
0
|
||||
Resubmission in response to Agency latter dated
|
||||
0
|
||||
"Me Too" Application.
|
||||
0
|
||||
Notification - Explain below.
|
||||
0
|
||||
Other - Explain below. MAR 11 2005
|
||||
Explanation: Uso additional pogols' if necessary. (For soction I and Section II.'
|
||||
Other Revisions
|
||||
Notification of Other Revisions per PR Notice 98-10. This notification is consistent with the provisions of PR Notice 98-10 and EPA regulations at 40 CFR
|
||||
152.46. and no other changes have been made to the labeling or the confidential statement of fonnula of this product. I understand that it is a violation of 18
|
||||
U.S.C. Sec. 1001 to willfully make any false statement to EPA. I further understand that if this notification is not consistent with the terms of PR Notice 98-10
|
||||
and 40 CFR 152.46, this product may be in violation of FIFRA and I may be subject to enforcement action and penalties under sections 12 and 14 of FIFRA.
|
||||
Section - III
|
||||
1. Motoriol Thlo Product Will Be Pock.ged In:
|
||||
,
|
||||
Child-Resistant Packaging Unit Packaging Water Soluble Packaging 2. Type of Container
|
||||
~ve. ~ve.
|
||||
~
|
||||
Ve.
|
||||
~r~
|
||||
.... No .... No '" Plastic No Glass
|
||||
• Certification must If -Ve'- No. per If ·Yas- No. per Paper
|
||||
Unit Packaging wgt. container Peckage wgt container Other (Specify) btl submitted
|
||||
I
|
||||
3. Location of Net Contents Information 4. Size(s) Retail Container 5. Location of Label Directions
|
||||
r .... Label U Container t::::=:j On Label
|
||||
6. Mannor in Which Label is Affixed to Product ~UthOgraPh 0 Other
|
||||
Self Adhesive P_r p,luod
|
||||
SteRei i!Id
|
||||
Section - IV
|
||||
,. Contact Point (Complete items dir.ctly b.Jow for id.ntification of individulll to b. contsctad. if necflSSsry, to process this spplication.)
|
||||
Name Title Telephone No. (Include Area Code)
|
||||
Mandy K. Styles Product Registration Supervisor (901) 752·4"20
|
||||
CertHiclltion 6. Ooto Application
|
||||
I certify that tho statements I haYe made on this form and all attachments thereto are true. accurate arid complete. Received
|
||||
I acknowledge that any knowlinglly falee or misleading statement may be punishable by fine or imprisonment or (Stampell,
|
||||
both under applicable law.
|
||||
2. Signature ~;,: 3. Tide
|
||||
J/~ "
|
||||
Product Registration Supervisor
|
||||
4. Typed Name 5.0ate
|
||||
Mandy K. Styles 3/1/2005
|
||||
.. EPA Form 8570-1 IRev. 3·941 PreVlou8 eehtlons are obsolete. White • EPA File Copy lorigln")
|
||||
|
||||
nUTlTTVHI iVIV-----
|
||||
MAR 1
|
||||
WEED RHAP A4·MCPA
|
||||
MCPAMINE HERBICIDE
|
||||
For the Selective Control of Many Broadleaf Weeds in
|
||||
Flax, Small Grains, Peas (Pacific Northwest Only), Clover
|
||||
(Pacific Northwest Only), Alfalfa and Grass Pastures; For
|
||||
Whitebrush Control;
|
||||
And For Weed Control in Non-Crop Areas
|
||||
ACTIVE INGREDIENT:
|
||||
Dimethylamine Salt of 2-Methyl-4-
|
||||
Chlorophenoxyacetic Acid ................................. 52.2%
|
||||
INERT INGREDIENTS: .......................................... .47.8%
|
||||
TOTAL ............................................. 100.0%
|
||||
E . I 42 60/. 4 II =qulva ent to o or I pounds per ga on of MCPA.
|
||||
KEEP OUT OF REACH OF CHILDREN
|
||||
DANGER • PELIGRO
|
||||
Si usted no entiende la etiqueta, busque a alguien para
|
||||
que se la explique a usted en detalle.
|
||||
(If you do not understand the label, find someone to
|
||||
explain it to you in detail.)
|
||||
PRECAUTIONARY STATEMENT
|
||||
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
|
||||
DANGER
|
||||
Corrosive, causes irreversible eye damage. Harmful if
|
||||
swallowed, inhaled or absorbed through skin. Do not get
|
||||
in eyes or on clothing. Avoid contact with skin. Avoid
|
||||
breathing spray mist.
|
||||
FIRST AID
|
||||
IF IN EYES:
|
||||
• Hold eyelid open and rinse slowly and gently with
|
||||
water for 15-20 minutes.
|
||||
• Remove contact lenses, if present, after the first
|
||||
5 minutes, then continue rinsing.
|
||||
• Call a poison control center or doctor
|
||||
immediately for treatment advice.
|
||||
IF SWALLOWED:
|
||||
• . Call a poison control center or doctor immediately
|
||||
for treatment advice.
|
||||
• Do not induce vomiting unless told to do so by a
|
||||
poison control center or doctor.
|
||||
• Have a person sip a glass of water if able to
|
||||
swallow.
|
||||
• Do not give anything to an unconscious or
|
||||
convulsing person.
|
||||
IF ON SKIN OR CLOTHING:
|
||||
• Take off contaminated clothing.
|
||||
• Rinse skin immediately with plenty of water for
|
||||
15-20 minutes.
|
||||
• Call a poison control center or doctor
|
||||
?nn~ O?/"
|
||||
immediately for treatment advice.
|
||||
IF INHALED:
|
||||
• Move victim to fresh air .
|
||||
• If not breathing, call 911 or an ambulance, then
|
||||
give artificial respiration, preferably mouth-to-mouth if
|
||||
possible.
|
||||
HOT LINE NUMBER
|
||||
Have the product container or label with you when calling
|
||||
a poison control center or doctor or going for treatment. In
|
||||
case of emergency, call ChemTrec at 1-800-424-9300.
|
||||
NOTE TO PHYSICIAN
|
||||
Probable mucosal damage may contraindicate the use of
|
||||
gastric lavage.
|
||||
SEE INSIDE PANEL FOR ADDITIONAL
|
||||
PRECAUTIONARY STATMENTS
|
||||
EPA REG. NO.: 5905-502
|
||||
EPA EST. NO.:
|
||||
MANUFACTURED BY
|
||||
NET CONTENTS:
|
||||
SN XXXXXX
|
||||
HELENA CHEMICAL COMPANY
|
||||
225 SCHILLING BOULEVARD, SUITE 300
|
||||
COLLIERVILLE, TENNESSEE 38017
|
||||
PERSONAL PROTECTION EQUIPMENT
|
||||
Applicators and other handlers must wear:
|
||||
Long-sleeved shirt and long pants
|
||||
Chemical Resistant Gloves CatepClry A
|
||||
Shoes plus socks
|
||||
Protective eyewear
|
||||
Discard clothing and other absorbent materials that have
|
||||
been drenched or heavily contaminated with this
|
||||
product's concentrate. Do not reuse them. Follow
|
||||
manufacturer's instructions for cleaning/maintaining PPE.
|
||||
If no such instructions for washables, use detergent and
|
||||
hot water. Keep and wash PPE separately from other
|
||||
laundry.
|
||||
Engineering Controls Statements
|
||||
When handlers use closed systems, enclosed cabs, or
|
||||
aircraft in a manner that meets the requirements listed in
|
||||
the Worker Protection Standard (WPS) for agricultural
|
||||
pesticides [40 CFR 170.240 (d)(4-6)], the handler PPE
|
||||
requirements may be reduced or modified as specified in
|
||||
the WPS.
|
||||
USER SAFETY RECOMMENDATIONS
|
||||
Users should:
|
||||
Wash hands before eating, drinking, chewing
|
||||
gum, using tobacco or using the toilet.
|
||||
|
||||
Remove clothing immediately if pesticide gets
|
||||
inside. Then wash thoroughly and put on clean
|
||||
clothing.
|
||||
Remove PPE immediately after handling this
|
||||
product. Wash the outside of gloves before
|
||||
removing. As soon as possible, wash thoroughly
|
||||
and change into clean clothing.
|
||||
ENVIRONMENTAL HAZARDS
|
||||
Drift or run-off may adversely affect nontarget plants. Do
|
||||
not apply directly to water, or to areas where surface
|
||||
water is present or to intertidal areas below the mean
|
||||
high water mark. Do not contaminate water when
|
||||
disposing of equipment washwaters. Do not contaminate
|
||||
water intended for irrigation or domestic purposes. Do not
|
||||
apply when weather conditions favor drift from target site.
|
||||
GROUND WATER CONTAMINATION STATEMENT
|
||||
Most cases of groundwater contamination involving
|
||||
phenoxy herbicides such as MCPA have been associated
|
||||
with mixing/loading and disposal sites. Caution should be
|
||||
exercised when handling MCPA pesticides at such sites
|
||||
to prevent contamination of groundwater supplies. Use of
|
||||
closed systems for mixing and transferring this pesticide
|
||||
will reduce the probability of spills. Placement of the
|
||||
mixing/loading equipment on an impervious pad to
|
||||
contain spills will help prevent groundwater
|
||||
contamination.
|
||||
CLEANING OF EQUIPMENT
|
||||
When cleaning equipment, do not pour washwater on the
|
||||
ground; spray or drain over a large area away from wells
|
||||
and other water sources.
|
||||
DIRECTIONS FOR USE
|
||||
It is a violation of Federal law to use this product in a
|
||||
manner inconsistent with its labeling.
|
||||
Do not apply this product in a way that will contact
|
||||
workers or other persons, either directly or through drift.
|
||||
Only protected handlers may be in the area during
|
||||
application. For any requirements specific to your State or
|
||||
Tribe, consult the agency responsible for pesticide
|
||||
regulation.
|
||||
AGRICULTURAL USE REQUIREMENTS
|
||||
Use this product only in accordance with its labeling and
|
||||
with the Worker Protection Standard, 40 CFR part 170.
|
||||
This Standard contains requirements for the protection of
|
||||
agricultural workers on farms, forests, nurseries, and
|
||||
greenhouses, and handlers of agricultural pesticides. It
|
||||
3/" contains requirements for training, decontamination,
|
||||
notification, and emergency assistance. It also contains
|
||||
specific instructions and exceptions pertaining to the
|
||||
statements on this label about personal protective
|
||||
equipment (PPE) and restricted-entry interval. The
|
||||
requirements in this box only apply to uses of this product
|
||||
that are covered by the Worker Protection Standard.
|
||||
Do not enter or allow worker entry into treated areas
|
||||
during the restricted entry interval (REI) of 48 hours.
|
||||
PPE required for early entry to treated areas that is
|
||||
permitted under the Worker Protection Standard and that
|
||||
involves contact with anything that has been treated,
|
||||
such as plants, soil, or water, is :
|
||||
Coveralls
|
||||
Chemical Resistant Gloves Category A
|
||||
Shoes plus socks
|
||||
Protective eyewear
|
||||
NON-AGRICULTURAL USE REQUIREMENTS
|
||||
The requirements in this box apply to uses of this product
|
||||
that are NOT within the scope of the Worker Protection
|
||||
Standard for agricultural pesticides (40 CFR Part 170).
|
||||
The WPS applies when this product is used to produce
|
||||
agricultural plants on farms, forests, nurseries, or
|
||||
greenhouses. Keep children and pets out of treated area
|
||||
until sprays have dried.
|
||||
STORAGE AND DISPOSAL
|
||||
Do not contaminate water, food or feed by storage or
|
||||
disposal. Open dumping is prohibited.
|
||||
STORAGE: Do not store this product near fertilizers,
|
||||
seeds, insecticides, or fungicides. Protect product from
|
||||
freezing. If subjected to freezing conditions, wanm to 70aF
|
||||
and agitate. This will retum product to original condition.
|
||||
Reclose all partially used containers by thoroughly
|
||||
tightening the screw cap. Damaged or leaking containers
|
||||
which cannot be used immediately, should be transferred
|
||||
to suitable sound containers and properly marked.
|
||||
Absorb any spill with a suitable clay absorbent and
|
||||
dispose of as indicated under "Pesticide Disposal."
|
||||
For safety and prevention of unauthorized use, all
|
||||
pesticides should be stored in locked facilities. To prevent
|
||||
accidental misuse, different pesticides should be stored in
|
||||
separate areas with enough distance between to provide
|
||||
clear identification.
|
||||
|
||||
Opened, partially used pesticides should be stored in
|
||||
original labeled containers when possible. When transfer
|
||||
to another container is necessary because of leakage or
|
||||
damage, carefully mark and identify contents of the new
|
||||
container.
|
||||
PESTICIDE DISPOSAL: Pesticide waste are acutely
|
||||
hazardous. Improper disposal of excess pesticide, spray
|
||||
mixture, or rinsate, is a violation of Federal law and may
|
||||
contaminate groundwater. If these wastes cannot be '
|
||||
disposed of by use according to label instructions, contact
|
||||
your State Pesticide or Environmental Control Agency, or
|
||||
the Hazardous Waste representative at the nearest EPA
|
||||
Regional Office for guidance.
|
||||
CONTAINER DISPOSAL: Triple rinse (or equivalent),
|
||||
adding rinsate to the spray tank. Then offer for recycling
|
||||
or reconditioning, or puncture and dispose of in a sanitary
|
||||
landfill, or by other procedures approved by state and
|
||||
local authorities.
|
||||
RETURNABLE - REFILLABLE CONTAINER (Drum):
|
||||
After use, return the container to the point of purchase or
|
||||
deSignated locations. This container must only be filled
|
||||
with WEED RHAP M-MCPA. DO NOT RE-USE THIS
|
||||
CONTAINER FOR ANY OTHER PURPOSE. Prior to
|
||||
refilling, inspect thoroughly for damage such as cracks,
|
||||
punctures, abrasions, and damaged or worn out threads
|
||||
on closure devices. Do not refill or transport damaged or
|
||||
leaking containers. Check for leaks after refilling and
|
||||
before transportation. If the container is not being refilled,
|
||||
return to the point of purchase.
|
||||
GENERAL PRODUCT INFORMATION
|
||||
USE PRECAUTIONS: MCP Amine Herbicide is
|
||||
injurious to most broad leaf plants and is useful for
|
||||
controlling these weeds in certain crops. Salts are the
|
||||
least volatile forms of MCPA and do not release enough
|
||||
vapors from treated areas to reduce yield of adjacent
|
||||
susceptible crops. This product is a salt of MCPA.
|
||||
Susceptible plants may, however, be injured by physical
|
||||
drift from the application of this product. However,
|
||||
several crops such as flax, rice oats, and small grains
|
||||
underseeded to legumes are more tolerant of MCPA than
|
||||
they are of 2,4-0. Apply this product only to varieties
|
||||
known to be tolerant of MCPA. Injury to crops may occur
|
||||
from this pesticide. If you are not prepared to accept
|
||||
some degree of crop injury, do not use this product. If
|
||||
you are uncertain concerning tolerant varieties or local
|
||||
use situations that may affect crop tolerance, contact your
|
||||
seed company or State Agricultural Extension Service for
|
||||
advice. Do not apply directly to or otherwise permit even
|
||||
Itltl
|
||||
minute amounts (such as spray drift) to contact fruit trees,
|
||||
vegetables, flowers, ornamentals, or other desirable
|
||||
plants susceptible to MCPA. DO NOT APPLY IN THE
|
||||
VICINITY OF COnON, GRAPES, TOBACCO OR
|
||||
TOMATOES. Do not use in or near a greenhouse. Do not
|
||||
spray when wind is blowing towards susceptible crops or
|
||||
ornamental plants. Do not apply this product through any
|
||||
type of irrigation system.
|
||||
Use coarse sprays to minimize spray drift since, under
|
||||
certain weather conditions, fine spray droplets may drift a
|
||||
mile or more. A spray thickening agent may be used with
|
||||
this pro9uct to aid in reducing spray drift. If used, follow
|
||||
all use recommendations and precautions on the product
|
||||
label.
|
||||
With ground equipment spray drift can be lessened by:
|
||||
1. Keeping the spray boom as low as possible.
|
||||
2. Applying 20 gallons or more of spray volume per acre.
|
||||
3. Using large-droplet producing nozzles.
|
||||
4. Using no more than 20 psi spray pressure at the
|
||||
nozzles.
|
||||
5. Spraying only when wind velocity is low.
|
||||
6. Stopping all spraying when wind exceeds 8 MPH.
|
||||
Do not use hollow cone-type nozzles or other nozzles
|
||||
that produce large amounts of line spray droplets.
|
||||
With aerial equipment, drift can be minimized by:
|
||||
1. Using no more than 20 psi spray pressure at nozzles.
|
||||
2. Using nozzle types and positions which do not produce
|
||||
fine spray droplets.
|
||||
3. Using a spray boom no longer than 3/4 the wing or
|
||||
rotor span 'of the aircraft.
|
||||
4. Spraying only when wind is less than 6 MPH.
|
||||
Determine air movement and direction before foliar
|
||||
application. Use a smoke generator or other means at or
|
||||
near the application site for the detection of air
|
||||
movement, air stability, or temperature inversions. Such a
|
||||
condition exists when there is little or no wind and air
|
||||
temperature is lower near the ground than at higher
|
||||
levels. Use appropriate drift control measures or avoid
|
||||
application when smoke is moving toward nearby
|
||||
desirable susceptible pli3nts or sensitive areas.
|
||||
Excessive amounts of this herbicide in the soil may
|
||||
temporarily inhibit seed germination or plant growth.
|
||||
Violent windstorms may move soil particles. If MCPA is
|
||||
on soil particles and they are blown onto susceptible
|
||||
plants, visible symptoms may appear. Serious injury is
|
||||
unlikely. The hazards of movement of MCPA on dust is
|
||||
|
||||
reduced if treated fields are irrigated or if rain occurs
|
||||
shortly after application.
|
||||
To avoid injury to desirable plants, do not handle or apply
|
||||
other agricultural chemicals with the same equipment
|
||||
used for MCPA unless it has been thoroughly cleaned
|
||||
with a suitable chemical cleaner.
|
||||
Local conditions may affect the use of herbicides. Consult
|
||||
your State Agricultural Experiment Station or Extension
|
||||
Service Weed Specialists for advice in selecting
|
||||
treatments from this label to best fit local conditions. Be
|
||||
sure that the use of this product conforms to all applicable
|
||||
regulations. Apply this product only as specified on this
|
||||
label.
|
||||
WHERE TO APPLY: MCP Amine Herbicide is used to
|
||||
control broad leaf weeds in flax, peas, small grains,
|
||||
established alfalfa and red clover, grass pastures,
|
||||
rangeland, and many non-crop areas. This product will kill
|
||||
or control the following weeds in addition to many other
|
||||
noxious plants susceptible to MCPA.
|
||||
WEEDS CONTROLLED
|
||||
Arrowhead
|
||||
Beggarticks
|
||||
Bindweed (hedge, field
|
||||
European)
|
||||
Burcucumber'
|
||||
Burdock
|
||||
Buttercup'
|
||||
Canada Thistle'
|
||||
Carpet weed
|
||||
Catsear'
|
||||
Cocklebur
|
||||
Croton (goatweed)
|
||||
Com cockle
|
||||
Daisy
|
||||
Dandelion'
|
||||
Dwarf nettle
|
||||
Fanweed
|
||||
Fat hen
|
||||
Fennel
|
||||
Galinsoga
|
||||
Goatsbeard
|
||||
Goldenrod
|
||||
Halbertleaved salt brush
|
||||
Hempnettle'
|
||||
Hoary cress'
|
||||
Honeysuckle'
|
||||
Jimsonweed
|
||||
Kochia'
|
||||
Knotweed
|
||||
Lambsquarters
|
||||
'Less Susceptible Weeds
|
||||
Marshelder Whitebrush
|
||||
Mexican poppy Whitetop
|
||||
Mint (dragonhead) Wintercress
|
||||
Mustard Wild carrot
|
||||
Nutgrass Wild gooseberry
|
||||
Perennial Wild jute
|
||||
momingglory
|
||||
Pennycress (field) Wild marigold
|
||||
Pepperweed (field) Wild petunia
|
||||
Pigweed' Wild radish
|
||||
Plantain' Wild sage
|
||||
Poison-hemlock Witchweed
|
||||
Prickly lettuce Yellow daisy
|
||||
Puncturevine Yellow rock
|
||||
Purslane'
|
||||
Ragweed
|
||||
Red root
|
||||
Redstem
|
||||
Shepherd's-purse
|
||||
Sicklepod
|
||||
Sneezeweed
|
||||
Sow ThisUe'
|
||||
Spanishneedles
|
||||
Stinging nettle'
|
||||
Stinkweed
|
||||
Sunflower'
|
||||
Thistle
|
||||
Thomapple
|
||||
Tree-of-heaven
|
||||
Vetch'
|
||||
Water plantain
|
||||
SA,
|
||||
WHEN TO APPLY: Apply the product during warm
|
||||
weather when weeds are young and actively growing.
|
||||
Uniform spray coverage is necessary for best results.
|
||||
Generally the low dosages listed will be satisfactory for
|
||||
young, succulent growth of sensitive weed species. For
|
||||
less sensitive species and under conditions where control
|
||||
is difficult, the higher dosages will be needed.
|
||||
HOW TO APPLY:
|
||||
PREPARING THE SPRAY: Mix the MCP Amine'
|
||||
Herbicide with water unless otherwise indicated on the
|
||||
label. Fill the mixing tank or spray tank with approximately
|
||||
1/2 theilmount of water to be used for spraying. Add the
|
||||
required amount of product with agitation. Add the
|
||||
remainder of water while continuing to agitate. NOTE:
|
||||
adding oil, wetting agents, or other adjuvants to the spray
|
||||
may reduce selectivity to crops, possible causing crop
|
||||
damage.
|
||||
SPRAYING CONDITIONS: Use a moderate spray
|
||||
pressure of approximately 20 psi. Enough spray volume
|
||||
should be used to give good coverage of the weeds being
|
||||
sprayed, This is usually 5 to 30 gallons by ground
|
||||
application or 3 to 10 gallons by air unless directed
|
||||
otherwise under specific directions, Higher spray
|
||||
volumes may be useful in some situations to provide
|
||||
better spray coverage when weeds are especially dense
|
||||
and/or to reduce spray drift.
|
||||
WEED CONTROL APPLICATIONS
|
||||
FOR USE IN FLAX, GRAINS, PASTURES,
|
||||
RANGELAND: Do not forage or graze dairy and meat
|
||||
animals on treated areas within seven (7) days of
|
||||
slaughter and/or treatment.
|
||||
FLAX: For control of susceptible weeds, use 1/4 to 1/2
|
||||
pint of MCP Amine Herbicide per acre. Treat flax when
|
||||
3 to 8 inches tall before buds begin to form. Rates of 3/4
|
||||
to 1 pint per acre may be needed to control some weeds
|
||||
such as wild buckwheat, smartweed and thistles but flax
|
||||
may be injured at these rates. Consult Local Extension
|
||||
Service or University Specialists for advice on herbicide
|
||||
use on flax. Do not forage or graze meat animals on
|
||||
treated areas within se\ien (7) days of slaughter.
|
||||
WEED CONTROL IN SMALL GRAINS: NOTE: Do not
|
||||
forage or graze meat animals on treated areas within
|
||||
seven (7) days of slaughter,
|
||||
Wheat, Barley, Oats and Rye not underseeded with
|
||||
Legumes: Use 1/2 to 1 pint MCP Amine Herbicide per
|
||||
|
||||
acre for the most susceptible weeds when grains are in
|
||||
the 3 to 4 leaf stage or up to early boot stage. Apply when
|
||||
weeds are very small for best results. Use up to 3 pints
|
||||
MCP Amine Herbicide per acre for the less susceptible
|
||||
weeds after crop has tillered but not later than early boot
|
||||
stage. Do not apply during the boot to dough stage of the
|
||||
grain.
|
||||
Wheat, Barley, Oats and Rye underseeded with
|
||||
Alfalfa, Birdsfoot Trefoil, Lespedeza, Red, White or
|
||||
Ladino Clover ( Clover·Pacific Northwest Only): For
|
||||
emergency control of susceptible weeds such as mustard
|
||||
and lambsquarters, use i4 to Y, pint of MCP Amine
|
||||
Herbicide per acre as soon as possible after weeds
|
||||
emerge, but after seedling grain is at least 3 inches tall.
|
||||
The 114 to 112 pint per acre rate can produce injury to
|
||||
legumes. Balance the severity of your weed problem
|
||||
against the possibility of crop damage. The grain and
|
||||
weeds should form a protective canopy which, together
|
||||
with the use of low gallonage applied at low pressure, will
|
||||
reduce the risk of damage to the legumes. Treatment
|
||||
may be made up to the full tiller stage, but not in the boot
|
||||
to dough stages of the grain. To control certain weed
|
||||
species, 1 pint per acre may be needed. Do not use
|
||||
where small seeded legumes, especially vetch, sweet
|
||||
clover, trefoil or alfalfa, are seeded unless injury to them
|
||||
can be tolerated.
|
||||
When applying to small grains, use a minimum of 5 -10
|
||||
gallons of water per acre for ground application and at
|
||||
least 2 gallons of total spray per acre for aerial
|
||||
application.
|
||||
PEAS (Pacific Northwest Only) Use 1/4 to 3/4 pint of
|
||||
MCP Amine Herbicide in at least 15 to 30 gallons of
|
||||
water per acre when peas are 4 to 6 inches tall, before
|
||||
first flowering, and weeds are small. Do not apply
|
||||
during bloom period. Higher rates of 1/2 to 3/4 pint per
|
||||
acre may be used to improve control of difficult weeds,
|
||||
but crop injury is more likely to occur. Do not apply if
|
||||
peas are taller than 7 inches or when they are stressed
|
||||
for lack of soil moisture. Do not apply when air
|
||||
temperature is over 90" F. Do no graze treated fields or
|
||||
feed treated vies to livestock.
|
||||
NOTE: MCP can cause injury and delayed maturity in
|
||||
the pea crop.
|
||||
ESTABLISHED ALFALFA OR RED CLOVER (Clover·
|
||||
Pacific Northwest Only) : For control of yellow rocket
|
||||
and other susceptible annual weeds such as pennycress
|
||||
or fanweed, use 1 pint of MCP Amine Herbicide per
|
||||
acre. Use only 1/2 pint per acre on new stands after
|
||||
clover has two or more true leaves. Old stands of Red
|
||||
f,/tl
|
||||
clover may be retarded by application of MCPA. Apply in
|
||||
late fall after frost has killed legume top-growth and
|
||||
legumes are donmant. The temperature at time of
|
||||
spraying should be above 40°F.
|
||||
GRASS PASTURES (INCLUDING GRASS GROWN
|
||||
FOR SEED): Use 2 to 4 pints of MCP Amine Herbicide
|
||||
per acre in 2 to 120 gallons in airplane or ground sprayer
|
||||
application. Apply when weeds are small and actively
|
||||
growing for best results. Use the higher rates fOr
|
||||
whitetop, Canada thistle, buttercup and other more
|
||||
difficult to control weeds. Use only the lower rate on
|
||||
seedling grasses. Spray perennials in early bud to full
|
||||
bloom stage and regrowth in Fall; other weeds in spring
|
||||
or fall. Legumes may be injured or killed. Do not use this
|
||||
treatment where legumes, especially alfalfa, are present
|
||||
and desirable. In some areas bent, buffalo, centipede,
|
||||
dichondra, carpet and St. Augustine grasses may be
|
||||
susceptible to injury. Do not use on newly seeded areas
|
||||
until grass is well established. Do not use from early boot
|
||||
to milk stage where grass seed production is desired.
|
||||
CONTROL OF WHITEBRUSH ON RANGELAND: Use 3
|
||||
pints of MCP Amine Herbicide with 1 gallon of diesel oil
|
||||
or IMPEL RED and enough water for good spray
|
||||
coverage, usually 5 to 10 gallons per acre. Apply in
|
||||
spring or fall when plant foliage is well developed and
|
||||
actively growing. Spraying during bloom is recommended
|
||||
but not immediately after shedding of blossoms.
|
||||
Retreatments may be needed in succeeding years.
|
||||
NOTE: First mix the MCP Amine Herbicide in the water,
|
||||
then add the oil with agitation. Spray must be kept
|
||||
agitated during spraying to avoid separation in the tank.
|
||||
NON·CROP AREAS: For control of susceptible weeds in
|
||||
fencerows, fallowlands, rights-of-way, roadsides, and
|
||||
similar areas, use 6 pints of product per acre in enough
|
||||
water to give sufficient coverage. NOTE: on fallow land,
|
||||
do not plant any crop for 3 months after treatment or until
|
||||
chemical has disappeared from soil.
|
||||
SPOT TREATMENT: For weed control in pastures,
|
||||
rangelands and in non-crop areas such as fencerows,
|
||||
fanmyards, shelter-belts and roadsides: Use Y. pint of
|
||||
MCP Amine Herbicidejn 3 to 4 gallons of water or 3/4
|
||||
gallon per acre in sufficient water to give good coverage
|
||||
for most extensive areas to control weeds such as
|
||||
Canada thistle, whitetop, meadow buttercup and Texas
|
||||
blueweed. Apply to wet weeds thoroughly when weeds
|
||||
are growing vigorously, usually prior to bloom, in bud to
|
||||
early bloom and spray fall regrowth if necessary. Do not
|
||||
forage or graze livestock or dairy animals on treated
|
||||
|
||||
areas within 7 days of treatment. Local conditions may
|
||||
affect the use of this chemical. Consult State Agricultural
|
||||
Extension or Experiment Station weed specialists for
|
||||
specific recommendations for local weed problems and
|
||||
for information on possible lower dosages.
|
||||
TANK MIXES
|
||||
Read and follow the manufacturer's label
|
||||
recommendation for each tank mix product used for
|
||||
precautionary statements, directions for use, geographic
|
||||
and other restrictions. If these recommendations conflict
|
||||
with this label, do not use as a tank mix with MCP Amine
|
||||
Herbicide. All intended tank mix combinations should be
|
||||
used only in recommended areas on the same broadcast
|
||||
and weed species found on both labels. For application
|
||||
methods and other use specifications, use the most
|
||||
restricted limitations from labeling of both products.
|
||||
MCP Amine Herbicide may be tank mixed with
|
||||
Harmony® for selective post-emergence control of certain
|
||||
weeds on Wheat and Barley. Use MCP Amine Herbicide
|
||||
at the rate of 1/8 to 3/8 pound acid equivalent (a.e.) per
|
||||
acre. Nonionic surfactant may be added at 1 to 2 pints
|
||||
per 100 gallons of spray volume; however, the addition of
|
||||
a surfactant may increase the chance of crop injury. Use
|
||||
the 1 to 2 pint rate of surfactant with 1/8 pound a.e. of
|
||||
MCP Amine Herbicide. Higher rates may be used, but do
|
||||
not exceed highest rate allowed on the label. Always mix
|
||||
Harmony in water prior to adding MCP Amine Herbicide
|
||||
and surfactant.
|
||||
MCP Amine Herbicide may be tank mixed with
|
||||
Harmony® Extra for use on Wheat, Barley, and Oats.
|
||||
For best results, add MCP Amine to the tank at 1/8 to 3/8
|
||||
pound a.e. per acre. Nonionic surfactant may be added
|
||||
to mixture at 1 to 2 pints per 100 gallons of spray volume;
|
||||
however, adding surfactant may increase the potential for
|
||||
crop injury. In tank mixes containing 1/8 pound a.e. per
|
||||
acre of MCP Amine per acre, add 1 to 2 pints of
|
||||
surfactant; in tank containing 1/4 to 3/8 pound a.e. per
|
||||
acre, add 1 pint of surfactant. Higher rates of MCP
|
||||
Amine may be used, but do not exceed the highest rate
|
||||
allowed by this label. Always mix Harmony Extra with
|
||||
water prior to adding MCPA and add the surfactant last.
|
||||
MCP Amine Herbicide may also be tank mixed with
|
||||
Harmony Extra for the control of Com gromwell, Wild
|
||||
buckwheat, and Vetch (common and hairy). In Oats, also
|
||||
controls Vetch (common and hairy), Wild garlic, and Wild
|
||||
radish.
|
||||
MCP Amine may be tank mixed with Ally® after weeds
|
||||
have emerged. For best results, use 1/10 ounce of Ally
|
||||
7//1
|
||||
per acre, add MCP Amine to the tank at 1/4 to 1/2 pound
|
||||
a.e. per acre. Nonionic surfactant may be added to the
|
||||
mixture at 1/2 to 1 quart per 100 gallons of spray solution;
|
||||
however, adding surfactant may increase the potential for
|
||||
crop injury. Apply MCP Amine plus Ally after three to
|
||||
five-leaf stage, but before boot (with Durum and
|
||||
Wampum varieties, do not apply before tillering). Always
|
||||
mix Ally in water prior to adding MCP Amine and
|
||||
surfactant. Always add surfactant last. MCPA and Ally
|
||||
can be tank mixed for use on Wheat or Barley or in
|
||||
pastures and rangelands for the control of Blue mustard,
|
||||
Flixweed, Tansy mustard, Canadian thistle, Sow1histle,
|
||||
Corn gromwell, Prostate knotweed, Sunflower
|
||||
(common/volunteer), and Wild buckwheat.
|
||||
MCP Amine may be tank mixed with Express® for use on
|
||||
Wheat and Barley. For best results, add MCP Amine to
|
||||
the tank at 1/8 to 3/8 pound a.e. per acre. Nonionic
|
||||
surfactant may be added to the mixture at 1 to 2 pints per
|
||||
100 gallons of spray volume; however, adding surfactant
|
||||
may increase the potential for crop damage. Tank mixes
|
||||
containing 1/8 pound a.e. MCP Amine per acre, add 1 to
|
||||
2 pints of surfactant; in tank mixes containing 1/4 to 3/8
|
||||
pound a.e. of MCP Amine per acre, add 1 pint of
|
||||
surfactant. Higher rates of MCP Amine may be used, but
|
||||
do not exceed the highest rate allowed on the label.
|
||||
Always mix Express and water prior to adding MCPA and
|
||||
add the surfactant last. MCP Amine and Express may
|
||||
also be used to control Vetch (common and hairy), Wild
|
||||
garlic, and Wild rice.
|
||||
MCP Amine may be used annually with Glean® FC after
|
||||
weeds have emerged. For best results, use 1/6 to 113
|
||||
ounce of Glean FC per acre; add MCP Amine to the tank
|
||||
at 1/4 to 1/2 pound a.e. per acre. Nonionic surfactant
|
||||
may be added to the mixture at 1/2 to 1 quart per 100
|
||||
gallons of spray solution; however, adding surfactant may
|
||||
increase the potential for crop injury. Do not add
|
||||
surfactant when Glean FC and MCP Amine are tank
|
||||
mixed with a liquid fertilizer. Apply MCP Amine plus
|
||||
Glean FC after the three to five-leaf stage, but before
|
||||
boot. Applying a tank mixture of MCP Amine and Glean
|
||||
FC, with fertilizer when temperatures are below freezing
|
||||
or when crop is stressed in cold weather, just prior to
|
||||
winter dormancy, can r~.sult in severe foliar bum and/or
|
||||
crop injury. Do not apply MCP Amine plus Glean FC in
|
||||
combination with organophosphate insecticides.
|
||||
MCP Amine may be tank mixed with Finesse® in Wheat
|
||||
and Barley for postemergent broad leaf weed control. For
|
||||
best results, use 1/5 to 2/5 ounce of Finesse per acre,
|
||||
add MCP Amine to the tank at 1/4 to 1/2 pound a.e. per
|
||||
|
||||
acre. Nonionic surfactant may be added to the mixture at
|
||||
1/2 to 1 quart per 100 gallons of spray solution; however,
|
||||
• adding surfactant may increase the potential for crop
|
||||
injury. Do not add surfactant when MCP Amine and
|
||||
Finesse are applied with liquid fertilizer. Apply MCP
|
||||
Amine plus Finesse after the three to five-leaf stage, but
|
||||
before boot stage. Applying tank mixture of MCP Amine,
|
||||
Finesse, and a liquid fertilizer when temperatures are
|
||||
below freezing or when the crop is stressed from cold
|
||||
weather, just prior to winter dormancy, can result in foliar
|
||||
bum and/or crop injury. Do not apply MCP Amine plus
|
||||
Finesse in combination with organophosphate
|
||||
insecticides.
|
||||
MCP Amine may be used with Buctril® in Wheat, Barley,
|
||||
Oats, and Rye in the four-leaf stage, but before jointing.
|
||||
This tank mix improves control of Mustards, Pigweed,
|
||||
and Kochia. Apply to weeds up to four-leaf stage, two
|
||||
inches in height to one inch in diameter, whichever
|
||||
comes first. Use at a rate of 1/4 to 112 pound a.e. per
|
||||
acre of MCPA and 1 to 2 pints per acre of Buctril. Do not
|
||||
use this tank mixture in areas where Alfalfa or other
|
||||
legumes have been planted.
|
||||
MCP Amine may be tank mixed with Banvel® Herbicide
|
||||
for fall and spring-seeded wheat. Applications to fall
|
||||
seeded wheat must be made prior to jointing stage and to
|
||||
spring-seeded wheat before the wheat exceeds the five
|
||||
leaf stage. Apply 2 to 4 fluid ounces of Banvel and 8 to
|
||||
12 fluid ounces of MCP Amine per acre. For use on fall
|
||||
seeded wheat only, apply 3 to 4 fluid ounces of Banvel
|
||||
with 1 to 2 pints of MCP Amine per acre. Do not use
|
||||
unless potential crop injury will be acceptable. For fall
|
||||
seeded Barley, apply 2 to 4 fluid ounces of Banvel with 8
|
||||
to 12 fluid ounces of MCP Amine per acre. This mixture
|
||||
must be applied to fall-seeded Barley prior to jointing
|
||||
stage. For spring Barley varieties that are seeded during
|
||||
the winter months or later, follow the rates and timings
|
||||
given for spring-seeded Barley. For spring-seeded
|
||||
Barley, application must be made before Barley exceeds
|
||||
the four-leaf stage. Apply 2 to 3 fluid ounces of Banvel
|
||||
Herbicide with 8 to 12 fluid ounces of MCP Amine per
|
||||
acre. For fall and spring-seeded Oats, application must
|
||||
be made before spring-seeded Oats exceed the five-leaf
|
||||
stage. Applications to fall-seeded Oats must be made
|
||||
prior to the jointing stage. Use 2 to 4 fluid ounces of
|
||||
Banvel with 8 to 12 fluid ounces of MCP Amine per acre.
|
||||
For grasses grown for seed, such as Bermudagrass,
|
||||
Bluegrass, Fescue, and Ryegrass, application must be
|
||||
made after the grass seed crop begins to joint. For the
|
||||
best performance, make applications when weeds are in
|
||||
~/"
|
||||
the two to four-leaf stage and rosettes are less than two
|
||||
inches across. Use the higher level of listed ranges when
|
||||
treating more mature weeds or dense vegetative growth .
|
||||
Apply 1/2 to 2 pints of Banvel with 1 to 2 pints of MCP
|
||||
Amine per acre.
|
||||
Herbicides other than Sulfonylureas, such as MCP
|
||||
Amine, tank mixed with Banvel® SGF will offer more
|
||||
consistent control of sulfonylureas-resistant weeds.
|
||||
Surfactants are not recommended when applying this
|
||||
tank mix on small grains. This tank mix must be applied
|
||||
to fall-seeded Wheat prior to the jointing stage. For
|
||||
spring-~eeded Wheat, applications must be made before
|
||||
wheat exceeds the five-leaf stage. Apply 4 to 8 fluid
|
||||
ounces of Banvel SGF with water before adding 8 to 12
|
||||
inches of MCP Amine per acre. Always add MCP Amine
|
||||
after diluting Banvel SGF. For fall-seeded Wheat only,
|
||||
apply 6 to 8 fluid ounces of Banvel SGF with 1 to 2 pints
|
||||
of MCP Amine per acre. Do not use unless potential crop
|
||||
injury will be acceptable. For fall-seeded Barley,
|
||||
application must be made prior to jointing stage. Apply 4
|
||||
to 8 fluid ounces of Banvel SGF with 8 to 12 fluid ounces
|
||||
of MCP Amine per acre. For spring Barley varieties that
|
||||
are seeded during the winter months or later, follow the
|
||||
rates and timing given for spring-seeded Barley. Spring
|
||||
seeded Barley must be applied before Barley exceeds
|
||||
the four-leaf stage. Apply 4 to 6 fluid ounces of Banvel
|
||||
SGF with 8 to 12 ounces of MCP Amine per acre. For fall
|
||||
and spring-seeded Oats, this tank mix must be applied
|
||||
before spring-seeded Oats exceed the five-leaf stage.
|
||||
Applications to fall-seeded Oats must be made prior to
|
||||
the jointing stage. Apply 4 to 8 fluid ounces of Banvel
|
||||
SGF with 8 to 12 fluid ounces of MCP Amine per acre.
|
||||
For grasses grown for seed, such as Bermudagrass,
|
||||
Bluegrass, Fescue, and Ryegrass, tank mixes with
|
||||
Banvel SGF and MCP Amine may be used to control
|
||||
broad leaf weeds.
|
||||
MCP Amine may be tank mixed with Tordon® 22K, a
|
||||
restricted-use pesticide. For use on Barley, Oats, and
|
||||
Wheat not underseeded with a legume (which is not flood
|
||||
or sub-irrigated and not rotated to broad leaf crops).
|
||||
MCP Amine may be tank mixed with Curtail®. Apply
|
||||
Curtail at a rate of 2 to '2,~2/3 pints plus MCP Amine using
|
||||
up to 112 pint per acre in the spring to actively growing
|
||||
Wheat or Barley once four leaves have unfolded on the
|
||||
main stem and tillering has begun up to the jointing stage
|
||||
(first node of main stem detectable). To control or
|
||||
suppress weeds, make application at the maximum
|
||||
emergence of the target weeds, but before they exceed
|
||||
three inches in height or diameter (four rosettes). To
|
||||
|
||||
obtain season-long control of perennial weeds, such as
|
||||
Canada thistle, apply after the majority of the weed's
|
||||
basal leaves have emerged from the soil, but before bud
|
||||
stage. A late timing of application (when the grain is
|
||||
between the jointing and boot stages) may be used to
|
||||
treat later-emerging weeds; however, do not apply unless
|
||||
the risk of injury is acceptable. Do not apply after the
|
||||
boot stage. NOTE: Higher rates of Curtail or any
|
||||
application of Curtail following spring postemergence
|
||||
treatment with MCPA may increase risk of crop injury.
|
||||
MCP Amine may be tank mixed with Stinger® for weed
|
||||
control in Wheat, Barley, and Oats. Apply 1/4 to 1/3 pint
|
||||
of Stinger plus 1/2 to 1 pint of MCP Amine per acre from
|
||||
the three-leaf stage up to early boot stage of growth. For
|
||||
control of perennial weeds, such as Canada thistle, 1/3
|
||||
pint of Stinger per acre should be used. Russian
|
||||
knapweed will only be suppressed at this rate.
|
||||
MCP Amine may be tank mixed with Stinger for
|
||||
application in grasses grown for seed. Apply only to
|
||||
established grasses before the boot stage. Application in
|
||||
the boot stage and beyond can increase injury. Do not
|
||||
apply to Bentgrass unless injury can be tolerated. For
|
||||
control of late emergent Canada thistle, a pre-harvested
|
||||
treatment may be made after the grass seed is fully
|
||||
developed. Treatment of Canada thistle at the bud stage
|
||||
or later may result in less consistent control. Post
|
||||
harvest, fall treatments may be made to actively growing
|
||||
Canada thistle after the majority of basil leaves have
|
||||
emerged. Use 2 to 4 pints of MCP Amine with 1/4 to 2J3
|
||||
pint of Stinger per acre. For control of annual weeds and
|
||||
Canada thistle, treat as necessary, but do not exceed 213
|
||||
pint of Stinger per acre per season. NOTE: Do not tank
|
||||
mix Stinger with MCPA unless the risk of injury is
|
||||
acceptable.
|
||||
MCP Amine may be used in combination with Poasl®
|
||||
and Buctril® for grass and broad leaf weed control in Flax.
|
||||
Controls a mixed population of grasses and broadleaf
|
||||
weeds listed as susceptible on the respective product
|
||||
labels. Prepare the tank mix by adding MCP Amine to
|
||||
half the final water volume, then crop oil concentrate,
|
||||
then Poas!, then Buctril, and bring the mixture to the final
|
||||
volume. Agitation must be continuous from the time of
|
||||
mixing through spraying. Mix these three products
|
||||
according to the rates recommended on the respective
|
||||
product labels, up to a maximum of one pint of Buctril
|
||||
equivalent per acre, or up to a maximum of 1/4 pound
|
||||
MCP Amine a.e. per acre. Do not delay spraying
|
||||
broad leaf weeds even though grassy weeds are not in
|
||||
correct stage for treatment. Buctril or Poast applied with
|
||||
qll/
|
||||
MCP Amine may cause leaf bum, retarded growth, and
|
||||
delayed maturity of the crop. Some reduced grass
|
||||
control may be experienced with this tank mix. Do not
|
||||
add ammonium sulfate or UAN solutions to this tank mix.
|
||||
CONDITIONS OF SALE· LIMITED WARRANTY
|
||||
AND LIMITATIONS OF LIABILITY AND REMEDIES
|
||||
Read the Conditions of Sale· Warranty and
|
||||
Limitations of Liability and Remedies before using
|
||||
this product. If the terms are not acceptable, return
|
||||
the product, unopened, and the full purchase price
|
||||
will be refunded.
|
||||
The directions on this label are believed to be reliable and
|
||||
should be followed carefully. Insufficient control of pests
|
||||
and/or injury to the crop to which the product is applied
|
||||
may result from the occurrence of extraordinary or
|
||||
unusual weather conditions or the failure to follow the
|
||||
label directions or good application practices, all of which
|
||||
are beyond the control of Helena Chemical Company (the
|
||||
"Company") or seller. In addition, failure to follow label
|
||||
directions may cause injury to crops, animals, man or the
|
||||
environment. The Company warrants that this product
|
||||
conforms to the chemical description on the label and is
|
||||
reasonably fit for the purpose referred to in the directions
|
||||
for use subject to the factors noted above which are
|
||||
beyond the control of the Company. The Company
|
||||
makes no other warranties or representations of any kind,
|
||||
express or implied, conceming the product, including no
|
||||
implied warranty of merchantability or fitness for any
|
||||
particular purpose, and no such warranty shall be implied
|
||||
by law.
|
||||
The exclusive remedy against the Company for any
|
||||
cause of action relating to the handling or use of this
|
||||
product shall be limited to, at Helena Chemical
|
||||
Company's election, one of the following:
|
||||
1. Refund of the purchase price paid by buyer or
|
||||
user for product bought, or
|
||||
2. Replacement of the product used
|
||||
To the extent allowed by law, the Company shall not be
|
||||
liable and any and all claims against the Company are
|
||||
waived for special, indi~ect, incidental, or consequential
|
||||
damages or expense of any nature, including, but not
|
||||
limited to, loss of profits or income. The Company and the
|
||||
seller offer this product and the buyer and user accept it,
|
||||
subject to the foregoing conditions of sale and limitation
|
||||
of warranty, liability and remedies.
|
||||
© Copyright Helena Holding Company, 2005.
|
||||
|
||||
BUCTRIL® is a registered trademark of Aventis Crop
|
||||
Science ..
|
||||
CURTAIL®, STINGER® and TORDON® are registered
|
||||
trademarks of DowAgro Sciences.
|
||||
BANVEL® is a registered trademark of BASF Ag
|
||||
Products ..
|
||||
ALL V®, HARMONV®, EXPRESS®, GLEAN®, and
|
||||
FINESSE® are registered trademarks of E. I. DuPont de
|
||||
Nemours & Company, Inc.
|
||||
IDI"
|
||||
|
||||
March 1, 2005
|
||||
HELENA CHEMICAL COMPANY
|
||||
225 Schilling Blvd., Suite 300
|
||||
Collierville, Tennessee 38017
|
||||
Telephone: 901/761-0050
|
||||
u.S. Environmental Protection Agency
|
||||
Document Processing Desk (NOTIF)
|
||||
Office of Pesticide Programs (7504C)
|
||||
1801 South Bell Street
|
||||
Crystal Mall #2, Room 266A
|
||||
Arlington, VA 22202-4501
|
||||
RE: Notification to Add Other Revisions
|
||||
To Whom It May Concern,
|
||||
Enclosed, you will find Helena Chemical Company's Notification for numerous products.
|
||||
Helena has updated the copyright company name, all trademarks, and registered trademarks
|
||||
from Helena Chemical Company to Helena Holding Company. This has been done on the
|
||||
following products:
|
||||
Weed Rhap A-4O 5905-501
|
||||
Weed Rhap A4-MCPA Herbicide 5905-502
|
||||
Weed Rhap A-60 Herbicide 2,4-D Amine 5905-503
|
||||
Weed Rhap LV-4O 5905-505
|
||||
Transvaal Weed Rhap LV-4 MCPA Herbicide 5905-506
|
||||
Weed Rhap Low Volatile Granular D Herbicide 5905-507
|
||||
Weed Rhap LV-60 5905-508
|
||||
MCPA Sodium Salt 5905-510
|
||||
Setre Carbaryl 80WP Insecticide 5905-517
|
||||
Trifluralin 4EC 5905-519
|
||||
Par F 70 Soluble Oil 5905-520
|
||||
Trifluralin 600 5905-521
|
||||
Atrazine 900F 5905-522
|
||||
Propanil 600 5905-523
|
||||
Copper Z 6/2 Granular Algicide 5905-524
|
||||
Chlorothalonil 900 5905-527
|
||||
Barrage HF 5905-529
|
||||
Allityn Insect Repellent 5905-531
|
||||
Trifluralin HFP 5905-532
|
||||
Pro-Mate Barricade 0.375% Plus Fertilizer 5905-535
|
||||
This should also be noted on all alternate brand names of the master labels.
|
||||
In support of these Notifications, you will find the following:
|
||||
EPA Form 8570-1
|
||||
1 copy of the revised label highlighted
|
||||
If you have any questions, do not hesitate to cali me at (901) 752-4420 or by fax at (961)
|
||||
758-1694. Thank you for your assistance in this matter.
|
||||
Sincerely,
|
||||
Mandy K. Styles
|
||||
Product Registration Supervisor
|
||||
J ,-;.)
|
||||
III, ,
|
||||
Reference in New Issue
Block a user