# Warrant Herbicide

- **Product class:** herbicide
- **EPA Reg No:** 524-591
- **Active ingredients:** Acetochlor
- **Source:** https://www.cropscience.bayer.us/crop-protection/herbicide/warrant-herbicide
- **Label PDF:** https://cs-assets.bayer.com/is/content/bayer/Warrant_Herbicide_Bayer1p_Labelpdf

---

US62219635C (200618Cv2) WARRANT  2.5 GAL ECL
Color: CMYK   Date: 08/10/2021
(Label Coordinator: Mark Schmidt)
NET CONTENTS:
2.5 Gallons
Warrant Herbicide is an encapsulated herbicide for weed
control in Alfalfa, Field Corn, Popcorn, Production Seed
Corn, Silage Corn, Cotton, Peanut, Forage or Grain Sorghum
(Milo), Soybean, and Sugar Beet.
ACTIVE INGREDIENT:
 *Acetochlor  ..................................................................................   33.0%
OTHER INGREDIENTS  ..........................................................................   67.0%
                                                                                                      100.0%
  *Contains 359 grams/liter or 3.0 pounds/gallon of 2-chloro-
    N-ethoxymethyl-N-(2-ethyl-6-methylphenyl) acetamide.
EPA Reg. No. 524-591                                                                  EPA Est. No. 524-IA-1
Keep out of reach of children.
CAUTION!
See inside for additional Precautions and First Aid.
COMPLETE DIRECTIONS FOR USE
SHAKE WELL BEFORE USING
Not for Sale, Sale Into, Distribution and/or Use in Nassau and
Suffolk Counties of New York State.
FOR PRODUCT INFORMATION OR ASSISTANCE IN USING THIS PRODUCT,
CALL TOLL-FREE, 1-866-99BAYER (1-866-992-2937)
IN CASE OF AN EMERGENCY INVOLVING THIS HERBICIDE PRODUCT, OR FOR
MEDICAL ASSISTANCE, CALL COLLECT, DAY OR NIGHT, 1-800-334-7577
Packed For:
Bayer CropScience LP
800 N. Lindbergh Blvd.
St. Louis, Missouri 63167
©2021 Bayer Group
US62219635C     200618Cv2    08/21
ACETOCHLOR GROUP HERBICIDE
HERBICIDE
6.875”
7.125”
6.875”
6.625”
COPY AREA
COPY AREA

1
Read the entire label before using this product.
Use only according to label instructions.
Read “LIMIT OF WARRANTY AND LIABILITY” statement at the end of the label
before buying or using. If terms are not acceptable, return at once unopened.
CONTENTS
1 1.0 INGREDIENTS ....................................................................1
2 2.0 IMPORTANT PHONE NUMBERS .........................................1
3 3.0 PRECAUTIONARY STATEMENTS .........................................1
 3.1 Hazards to Humans and Domestic Animals ........................1
 3.2 Environmental Hazards ......................................................1
4 4.0 STORAGE AND DISPOSAL ..................................................2
5 5.0 PRODUCT INFORMATION ..................................................2
 5.1 Use Restrictions .................................................................2
 5.2 Replanting and Rotational Crops .........................................3
  5.2.1 Replanting After Crop Loss ..................................3
  5.2.2 Cover Crops ........................................................3
  5.2.3 Rotational Crops .................................................3
6 6.0 WEED RESISTANCE MANAGEMENT ...................................3
 6.1 W eed Management Practices.............................................. 3
 6.2 Management of Herbicide-Resistant Biotypes ....................3
7 7.0 SOIL TEXTURE ...................................................................3
8 8.0 MIXING, SPRAYING AND HANDLING ..................................3
 8.1 Equipment Cleaning & Repair .............................................4
 8.2 Sprayer Compatibility .........................................................4
9 9.0 APPLICATION SYSTEMS ....................................................4
 9.1 Ground Broadcast Treatment ..............................................4
 9.2 Aerial Application Equipment ..............................................4
 9.3 Center Pivot Irrigation Equipment .......................................4
 9.4 Cultivation Information .......................................................5
10 10.0 APPLICATION TIMING AND METHODS ..............................5
 10.1 Preplant, At-Planting, and Preemergence Surface ...............5
 10.2 Postemergence Surface Application ....................................5
11 11.0 WEEDS CONTROLLED........................................................ 5
 11.1 Annual Grasses ..................................................................5
 11.2 Annual Broadleaves ...........................................................5
12 12.0 ALFALFA  ...........................................................................6
 12.1 Warrant Herbicide for Postemergence Use in Alfalfa ...........6
 12.2 Warrant Herbicide Tank-Mixtures for
  Postemergence Use in Alfalfa  ............................................6
13 13.0 FIELD CORN, POPCORN, PRODUCTION SEED CORN,
  AND SILAGE CORN ............................................................ 6
 13.1 Warrant Herbicide for Preplant, At-Planting, and
  Preemergence Use in Corn .................................................6
 13.2 Warrant Herbicide Tank Mixtures for Preplant, At-Planting,
  or Preemergence Use in Corn  ............................................6
 13.3 Warrant Herbicide for Postemergence Use in Corn  .............6
 13.4 Warrant Herbicide Tank-Mixtures for Postemergence
  Use in Corn ................................................................................7
14 14.0 COTTON  ...........................................................................7
 14.1 Warrant Herbicide for Preplant, At-Planting, or
  Preemergence Use in Cotton ...............................................7

 14.2 Warrant Herbicide Tank Mixtures for Preplant, At-Planting,
  or Preemergence Use in Cotton ...........................................7
 14.3 Warrant Herbicide for Postemergence Use in Cotton ...........7
 14.4 Warrant Herbicide Tank-Mixtures for Postemergence
  Over-The-Top Use in Cotton  ....................................................8
 14.5 Warrant Herbicide Tank-Mixtures for
  Post-Directed Use in Cotton................................................ 8
15 15.0 PEANUT  ...........................................................................8
 15.1 Warrant Herbicide for Preplant, At-Planting, or
  Preemergence Use in Peanut ..............................................8
 15.2 Warrant Herbicide Tank Mixtures for Preplant, At-Planting,
  or Preemergence Use in Peanut ..........................................8
 15.3 Warrant Herbicide for Postemergence Use in Peanut ...........8
 15.4 Warrant Herbicide Tank-Mixtures for Postemergence
  Use in Peanut .....................................................................8
16 16.0 FORAGE OR GRAIN SORGHUM (MILO) ..............................8
 16.1 Warrant Herbicide for Preplant Incorporated,
                        Preemergence, or Postemergence in Sorghum ....................8
 16.2 Warrant Herbicide Tank-Mixtures for Preplant Incorporated,
  Preemergence, or Postemergence Use in Sorghum ............. 9
17 17.0 SOYBEAN ...........................................................................9
 17.1  Warrant Herbicide for Preplant, At-Planting, or
  Preemergence Use in Soybean ...............................................9
  17.2 Warrant Herbicide Tank Mixtures for Preplant, At-Planting,
  or Preemergence Use in Soybean........................................ 9
 17.3 Warrant Herbicide for Postemergence Use in Soybean ........9
 17.4 Warrant Herbicide Tank-Mixtures for Postemergence Use
  in Soybean .......................................................................10
18 18.0 SUGAR BEET ....................................................................10
 18.1 Warrant Herbicide for Postemergence
  Use in Sugar Beet .............................................................10
 18.2 Warrant Herbicide Tank-Mixtures for
  Postemergence Use in Sugar Beet ....................................10
19 19.0 LIMIT OF WARRANTY AND LIABILITY  .............................10
1.0 INGREDIENTS
ACTIVE INGREDIENT:
 *Acetochlor  ....................................................................   33.0%
OTHER INGREDIENTS:  ........................................................   67.0%
                                                                                       100.0%
*Contains 359 grams/liter or 3.0 pounds/gallon of 2-chloro-
  N-ethoxymethyl-N-(2-ethyl-6-methylphenyl) acetamide.
Licensed U.S. Patents for this product can be found at the following web
page: www.monsantotechnology.com .
2.0 IMPORTANT PHONE NUMBERS
1. FOR PRODUCT INFORMATION  OR ASSISTANCE IN USING THIS PRODUCT ,
 CALL TOLL-FREE, 1-866-99BAYER (1-866-992-2937)
2. IN CASE OF AN EMERGENCY INVOLVING THIS HERBICIDE PRODUCT, OR
 FOR MEDICAL ASSISTANCE, CALL COLLECT, DAY OR NIGHT,
 1-800-334-7577
3.0 PRECAUTIONARY STATEMENTS
3.1 H azards to Humans and Domestic Animals
Keep out of reach of children.
CAUTION!
HARMFUL IF ABSORBED THROUGH THE SKIN OR INHALED.
MAY CAUSE ALLERGIC SKIN REACTION. Prolonged or frequently repeated skin
contact may cause allergic reactions in some individuals.
Avoid breathing vapor or spray mist.
Remove contaminated clothing and wash before reuse.
Avoid contact with skin or clothing. Wash thoroughly with soap and water
after handling.
FIRST AID: Call a poison control center or doctor for treatment advice.
IF ON SKIN
OR
CLOTHING
• Take off contaminated clothing.
•  Rinse skin immediately with plenty of water for 15-20 minutes.
• Sensitized persons should avoid further contact and reuse
of contaminated clothing.
IF
INHALED
• Move person to fresh air.
• If person is not breathing, call 911 or an ambulance, then
give artificial respiration, preferably by mouth-to-mouth, if
possible.
•  Have the product container or label with you when calling a poison control
center or doctor, or going for treatment.
•  You may also contact 1-800-334-7577,  collect day or night, for
emergency medical treatment information.
•  This product is identified as Warrant Herbicide, EPA Registration
No. 524-591.
Personal Protective Equipment (PPE):
Some of the materials that are chemical-resistant to this product are
listed below.
Applicators and other handlers must wear:  long-sleeved shirt and long
pants, chemical-resistant gloves made of any waterproof material such as
polyethylene or polyvinylchloride, and shoes plus socks.
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such
instructions for washables exist, use detergent and hot water. Keep and wash
PPE separately from other laundry.
Engineering Controls:  When handlers use closed systems, or enclosed
cabs in a manner that meets the requirements listed in the Worker
Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)
(4-6)], the handler PPE requirements may be reduced or modified as
specified in the WPS.
User Safety Recommendations:
Users should:
•  Wash hands before eating, drinking, chewing gum, using tobacco or using
the toilet.
•  Remove clothing/PPE immediately if pesticide gets inside. Then wash
thoroughly and put on clean clothing.
• Remove PPE immediately after handling this product. Wash the outside
of gloves before removing. As soon as possible, wash thoroughly and
change into clean clothing.
3.2 Environmental Hazards
This product is toxic to fish. Do not apply directly to water, or to areas where surface
water is present or to intertidal areas below the mean high-water mark. Do not
contaminate water when disposing of equipment wash water.
This chemical demonstrates the properties and characteristics associated with
chemicals detected in ground water. The use of this chemical in areas where soils
are permeable, particularly where the ground water is shallow, may result in ground
water contamination.
Acetochlor has properties that may result in surface water contamination via
dissolved runoff and runoff erosion. Follow practices to minimize the potential for
dissolved runoff and/or runoff erosion.
7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

2
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in any manner inconsistent
with its labeling.  This product may only be used in accordance with the
Directions for Use on this label or in separately published supplemental
labeling.  Supplemental labeling can be obtained from your Authorized Bayer
CropScience LP Retailer or Bayer CropScience LP Representative.
Do not apply this product in a way that will contact workers or other persons,
either directly or through drift.  Only protected handlers may be in the area
during application.  For any requirements specific to your State or Tribe,
consult the agency responsible for pesticide regulation.
Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk Counties
of New York State.
Agricultural Use Requirements
Use this product only in accordance with its labeling and with the Worker
Protection Standard, 40 CFR part 170.  This Standard contains requirements
for the protection of agricultural workers on farms, forests, nurseries,
and greenhouses, and handlers of agricultural pesticides.  It contains
requirements for training, decontamination, notification and emergency
assistance.  It also contains specific instructions and exceptions pertaining
to the statements on this label about personal protective equipment (PPE)
and restricted-entry interval.  The requirements in this box only apply to uses
of this product that are covered by the Worker Protection Standard.
Do not enter or allow worker entry into treated areas during the restricted
entry interval (REI) of 12 hours. Exception: if the product is soil-injected
or soil-incorporated, the Worker Protection Standard, under certain
circumstances, allows workers to enter the treated area if there will be no
contact with anything that has been treated.
PPE required for early entry to treated areas that is permitted under the
Worker Protection Standard and that involves contact with anything that
has been treated, such as plants, soil, or water, are: coveralls, chemical-
resistant gloves made of any waterproof material, and shoes plus socks.
4.0 STORAGE AND DISPOSAL
Proper pesticide storage and disposal are essential to protect against
exposure to people and the environment due to leaks and spills, excess
product or waste, and vandalism.
Do not allow this product to contaminate water, foodstuffs, feed or seed
by storage or disposal.
PESTICIDE STORAGE: Store pesticides away from food, pet food, feed,
seed, fertilizers, and veterinary supplies.  Keep container closed to prevent
spills and contamination.
PESTICIDE DISPOSAL: To avoid wastes, use all material in this container,
including rinsate, by application according to label directions.  If wastes
cannot be avoided, offer remaining product to a waste disposal facility
or pesticide disposal program. Such programs are often run by state or
local governments or by industry.  All disposal must be in accordance with
applicable federal, state and local regulations and procedures.
CONTAINER HANDLING AND DISPOSAL:
Non-refillable, Rigid Plastic 2.5-gallon Containers of greater than
1-gallon but equal to or less than 5-gallon capacity:
Non-refillable container.  Do not reuse this container to hold materials
other than pesticides or dilute pesticides (rinsate).  After emptying and
cleaning, it may be allowable to temporarily hold rinsate or other pesticide-
related materials in the container.  Contact your state regulatory agency to
determine allowable practices in your state.
Triple rinse or pressure rinse (or equivalent) this container promptly after
emptying.
Triple rinse as follows: Empty the remaining contents into application
equipment or a mix tank and drain for 10 seconds after the flow begins to
drip.  Fill the container 1/4-full with water and recap. Shake for 10 seconds.
Pour rinsate into application equipment or a mix tank or store rinsate for
later use or disposal.  Drain for 10 seconds after the flow begins to drip.
Repeat this procedure two more times.
Pressure rinse as follows: Empty the remaining contents into application
equipment or a mix tank and continue to drain for 10 seconds after the flow
begins to drip.  Hold container upside down over application equipment or
mix tank or collect rinsate for later use or disposal.  Insert pressure rinsing
nozzle in the side of the container, and rinse at about 40 PSI for at least 30
seconds.  Drain for 10 seconds after the flow begins to drip.
Once properly rinsed, some agricultural plastic pesticide containers can
be taken to a container collection site or picked up for recycling.  To find
the nearest site, contact your chemical dealer or Bayer CropScience LP at
1-866-99BAYER (1-866-992-2937).  If recycling is not available, dispose
of in accordance with federal, state, and local regulations and procedures,
which may include puncturing the properly rinsed container and disposing
in a sanitary landfill.
5.0 PRODUCT INFORMATION
Warrant Herbicide is for control of the annual grasses and broadleaf weeds
listed in the “WEEDS CONTROLLED” section of this label.  This product will not
control emerged seedlings.  This product is to be applied preplant, at-planting,
preemergence, and/or postemergence to the labeled crops and preemergence
to the weeds. Read and carefully observe precautionary statements and all
other information appearing on the labeling of all products used in mixtures
and sequential treatments.
5.1 Use Restrictions
Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk Counties
of New York State.
This chemical demonstrates the properties and characteristics associated
with chemicals detected in ground water.  The use of this chemical in areas
where soils are permeable, particularly where the ground water is shallow,
may result in ground water contamination.  On the following soil types, do
not apply this product within 50 feet of any well where the depth to ground
water is 30 feet or less: sands with less than 3 percent organic matter; loamy
sands with less than 2 percent organic matter; or sandy loams with less than
1 percent organic matter.  See the figure for additional clarification.
This product may not be mixed or loaded within 50 feet of any wells (including
abandoned wells and drainage wells), sink holes, perennial or intermittent
streams and rivers, and natural or impounded lakes and reservoirs.  This
setback does not apply to properly capped or plugged abandoned wells and
does not apply to impervious pad or properly diked mixing/loading areas.
Operations that involve mixing, loading, rinsing, or washing of this product into
or from pesticide handling or application equipment or containers within 50 feet
of any well are prohibited unless conducted on an impervious pad constructed
to withstand the weight of the heaviest load that may be positioned on or moved
across the pad.  Such a pad shall be designed and maintained to contain any
product spills or equipment leaks, container or equipment rinse or washwater,
and rainwater that may fall on pad. Surface water shall not be allowed to either
flow over or from the pad, which means the pad must be self-contained. The
pad shall be sloped to facilitate material removal.  An unroofed pad shall be
of sufficient capacity to contain a minimum of 110 percent of the capacity of
the largest pesticide container or application equipment on the pad.  A pad
that is covered by a roof of sufficient size to completely exclude precipitation
from contact with the pad shall have a minimum containment capacity of
100 percent of the capacity of the largest pesticide container or application
equipment on the pad. Containment capacities as described above shall be
maintained at all times. The above specified minimum containment capacities
do not apply to vehicles when delivering pesticide shipments to the mixing/
loading site. States may have in effect additional requirements regarding
wellhead setbacks and operational containment.
Maximum Application Rates: The maximum application or use rates stated
throughout this label are given in units of volume (fluid ounces or quarts)
of this product per acre.  However, the maximum allowed application rates,
apply to this product combined with the use of any and all other herbicides
containing the active ingredient acetochlor, whether applied separately or in a
tank mixture, on a basis of total pounds of acetochlor per acre. If more than one
acetochlor-containing product is applied to the same site within the same year,
do not exceed the allowed maximum total of 3 pounds per acre of acetochlor.
See the “INGREDIENTS” section of this label for necessary product information.
Do not flood irrigate to apply or incorporate this product.
Product must be used in a manner which will prevent back siphoning into wells,
spills or improper disposal of excess pesticide, spray mixtures or rinsates.
Make applications of this product promptly after preparing the spray mixture.
Avoid use of spray solutions of this product which have been allowed to stand
or have been stored in application equipment or the mix tank for an extended
period of time as crop injury could result.
Do not make postemergence surface applications using sprayable fluid fertilizer
as the carrier because severe crop injury may occur.
Do not apply this product through any type of irrigation system except under
conditions specified on this label, or otherwise directed on separately published
supplemental labeling for this product in possession of the user at the time
of application.
Do not apply this product using center pivot equipment except under the
conditions specified in the Center Pivot Application Equipment section of this
label, or on separately published center pivot application supplemental labeling
for this product in possession of the user at the time of application.
Disposal of excess pesticide, spray mixtures or rinsate must be according to
label use instructions or according to the State Pesticide or Environmental
Control Agency or the Hazardous Waste representative at the nearest EPA
regional office.
Do not apply under conditions which favor runoff or wind erosion of soil
containing this product to non-target areas.  To prevent off-site movement due
to runoff or wind erosion:
•  Avoid treating powdery dry or light sandy soils when conditions are favorable
for wind erosion.  Under these conditions, the soil surface must first be
settled by rainfall or irrigation.
• Do not apply to impervious substrates such as paved or highly compacted
surfaces or frozen or snow-covered soils.
• Do not use tailwater from the first flood or furrow irrigation of treated fields
to treat non-target crops unless at least 1/2 inch of rainfall has occurred
between application and the first irrigation.

7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

3
Do not apply this product using aerial application equipment except under the
conditions specified, and only in the states listed, in the Aerial Application
Equipment section of this label, or only in other states listed in separately
published aerial application supplemental labeling for this product, in
possession of the user at the time of application.
Do not apply when wind conditions favor drift to non-target sites.  To minimize
spray drift to non-target areas:
•  Use low-pressure application equipment capable of producing a large droplet
spray.  Do not use nozzles that produce a fine droplet spray.  Minimize drift by
using sufficient spray volume to ensure adequate coverage with large droplet
size sprays.
• Keep ground driven spray boom as low as possible above the target surface.
• Make application when the wind velocity favors on-target product deposition
(approximately 3 to 10 miles per hour). Do not apply when wind velocity
exceeds 15 miles per hour.  Avoid application when gusts approach 15 miles
per hour.
• Low humidity and high temperatures increase the likelihood of spray drift to
sensitive areas.  Avoid spraying during conditions of low humidity and/or high
temperatures.  Do not apply during inversion conditions.
Use of this product not consistent with this label may result in injury to persons,
animals or crops, or other unintended consequences.
Flush sprayer with clean water after use.
Dry weather may reduce effectiveness of this product.  Cultivate if weeds
develop.
5.2 Replanting and Rotational Crops
 5.2.1 Replanting After Crop Loss
If a crop treated with this product is lost, the crops listed below may be replanted
immediately. Immediate replanting of any of the crops listed could result in
crop injury.
These crops include:
•  field corn, seed corn, silage corn, popcorn
• cotton
• milo (sorghum)
• peanut
• soybean
Replanting Restrictions:
When replanting milo (sorghum) use only seed properly treated with seed
protectant or safener.
Do not exceed the annual maximum total of 3.0 pounds per acre of acetochlor
active ingredient if additional acetochlor is applied in the replanted crop.
 5.2.2 Cover Crops
Non-food and non-feed cover crops may be planted after the harvest of a crop
treated with this product, as a means of soil improvement, erosion control, or
weed suppression. However, injury to cover crops may occur, as all possible
cover crops have not been evaluated for tolerance to this product.
Cover crops should be tilled or controlled with application of a non-selective
herbicide prior to or at the next planting of any crop listed on this product label.
Restriction:  If the cover crop is maintained, do not graze or harvest cover
crops for food or animal feed for a minimum of 18 months following last
application of Warrant Herbicide.
 5.2.3 Rotational Crops
Observe the following rotational planting intervals after the last application of
Warrant Herbicide.
• Nongrass animal feeds  such as clover, kudzu, lespedeza, lupin, sainfoin,
trefoil, velvet bean, and  Vetch spp. may be planted 9 months after
application.
• Wheat (Triticum spp.) may be planted 4 months after application.
Rotate the next spring to the following crops:
• Cereal Grains:
Barley, Buckwheat, Millet (pearl and proso), Oats, Rice, Rye, Teosinte, Triticale,
and Wild rice
• Dried shelled pea and bean (except soybean) subgroup:
Restriction:  Do not rotate to any species or variety of succulent bean or pea.
Lupinus spp.: grain lupin, sweet lupin, white lupin, white sweet lupin.
Phaseolus spp.: field bean, kidney bean, lima bean, navy bean, pinto bean,
and tepary bean.
Vigna spp.: adzuki bean, blackeyed pea, catjang, cowpea, Crowder pea, moth bean,
mung bean, rice bean, southern pea and urd bean.
Broad bean; chickpea; guar; lablab bean; lentil; pea (Pisum spp., includes field
pea); pigeon pea.
Other crops:
° For any crop listed below that is also a direct crop use approved on
 labeling for this product, carefully follow all use instructions on the main
 label booklet and separately published supplemental labeling for this product.
Alfalfa
Field corn, seed corn, silage corn, popcorn
Sweet corn
Cotton
Peanut
Potato (Solanum tuberosum) (does not include Sweet Potato)
Milo (sorghum)
Soybean
Sugar beet
Sunflower
Tobacco
6.0 WEED RESISTANCE MANAGEMENT
Acetochlor, the active ingredient in this product, is a Group 15 herbicide based
on the mode of action classification system of the Weed Science Society of
America.  Any weed population can contain plants that are naturally resistant
to Group 15 herbicides. Weeds resistant to Group 15 herbicides can be
effectively managed by using another herbicide from a different Group (either
alone or in a mixture according to label directions), by using other cultural or
mechanical methods of weed control, or by a combination of the two.
Consult your local company representative, state cooperative extension agent,
professional consultant or other qualified authority to determine appropriate
actions for controlling specific resistant weeds.
6.1 Weed Management Practices
Resistant populations arise when rare individual plants are uncontrolled by
a normal dose of a given herbicide under normal environmental conditions.
In the absence of other control measures these individuals survive, produce
seed, and eventually become the dominant biotype in the field through
continuous selection.  The best means of reducing this selection is to use
diverse weed control practices such as multiple herbicides with different
mechanisms of action for the target weed, and often in combination with
various mechanical and cultural practices.
To minimize the occurrence of herbicide-resistant biotypes, including those
resistant to Group 15 herbicides, implement the following weed management
practice options that are practical to your situation. These management
practices are applicable to reduce the spread of confirmed resistant biotypes
(managing existing resistant biotypes) and to reduce the potential for selecting
for resistance in new species (proactive resistance management).
• Use a diversified approach toward weed management focused on
preventing weed seed production and reducing the number of weed seeds
in the soil.
• Plant crops into fields that are as weed-free as possible and then keep
them as weed-free as possible.
• Plant crop seed that is as weed-free as possible.
ACETOCHLOR GROUP HERBICIDE
• Scout fields routinely, before and after herbicide application.
• Use multiple herbicide modes of action that are effective against the
most troublesome weeds in your field and against those with known
resistance.
• Apply herbicides at application rates listed on the label when weeds are
within the size range indicated on the label.
• Emphasize cultural practices that suppress weeds by using crop
competitiveness.
• Use mechanical and biological weed management practices where
appropriate.
• Prevent field-to-field and within-field movement of weed seed or
vegetative propagules.
• Manage weed seed at harvest and after harvest to prevent a buildup of
the weed seedbank.
6.2 Management of Herbicide-Resistant Biotypes
Appropriate testing is needed to determine if a weed is resistant to Group
15 herbicides.  Call 1-866-99BAYER (1-866-992-2937) or contact your Bayer
CropScience LP representative or your local State Cooperative Extension
Agency to determine if resistance in any particular weed biotype has been
confirmed in your area, or visit on the Internet
www.weedresistancemanagement.com or www.weedscience.org.
Specifically, glyphosate resistant weeds can be controlled or managed by
applying this product in combination with herbicides labeled for control of
the targeted weed in the crops specified on this label. For more information,
see the “WEEDS CONTROLLED” section of this label.
Since the occurrence of resistant weeds is difficult to detect prior to use,
Bayer CropScience LP accepts no liability for any losses that result from the
failure of this product to control resistant weeds.
7.0 SOIL TEXTURE
Applicators must evaluate soil conditions carefully to assure that they choose
the correct label rate.
The use rates of this product and the other herbicides labeled for use in
tank mixtures with this product vary with soil texture.  Unless soil texture is
specifically named, rate tables throughout this label refer to only three soil
textural groups: coarse, medium and fine.  The following is a complete listing
of soil textures included in each of these three soil textural groups:
SOIL TEXTURAL GROUP SOIL TEXTURE
COARSE sand, loamy sand, sandy loam
MEDIUM loam, silt loam, silt, sandy clay loam
FINE silty clay loam, clay loam, sandy clay, silty
clay, clay
Refer to the above table to determine the corresponding soil textural group
for the soil to be treated.
8.0 MIXING, SPRAYING AND HANDLING
NOTE: Minimize direct contact or exposure to this product or spray
mixtures of this product.  The following instructions for transfer, mixing,
cleaning or repairing equipment must be followed in order to minimize
this exposure. Review the protective clothing requirements as listed in the
“PRECAUTIONARY STATEMENTS” section of this label and do not use this
product until you have the necessary protective clothing.
2.5 Gallon Containers
Open pouring from these containers can result in exposure from splashing
or spilling.  Special care in lifting and pouring are strongly recommended.
7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

4
Bulk Containers
Do not open pour from bulk containers as it can result in exposure from
splashing or spilling.  Transfer this product from these containers to the mix or
spray tank using pumps or transfer probes.  Do not remove or disconnect the
probe or pump from the container until the container is emptied and rinsed.
Use the pump or probe system to rinse the empty container and transfer the
rinsate directly to the mix or spray tank.
8.1 Equipment Cleaning & Repair
Cleaning and repair of transfer systems and application equipment is a source of
exposure to this product. Take precautions to minimize exposure during cleaning
and repair of transfer systems and application equipment. Whenever possible,
rinse these systems or equipment before being cleaning or repair.
When repairs must be made during transfer or application, the equipment should
be shut down, and special care taken to avoid contact with the pesticide.
8.2 Sprayer Compatibility
Always predetermine the compatibility of this product or labeled tank mixtures
of this product with water carrier by mixing small proportional quantities in
advance.
Mix this product or labeled tank mixture of this product with the appropriate
carrier as follows:
1. Place a 20- to 35-mesh screen or wetting basket over filling port.
2. Through the screen, fill the sprayer tank one-half full with the appropriate
carrier.
3. If a compatibility agent is necessary to improve mixing or to prevent the
formation of undesirable and unsprayable gels or precipitates, while agitating
add it to the carrier already in the tank. Use only compatibility agents cleared
by FDA for this use. Read and follow all directions for use, cautionary
statements and all other information appearing on the selected compatibility
agent label. Check for adequate agitation.
4. If a wettable powder or dry flowable formulation is used, make a slurry with
water and add it slowly through the screen into the tank.  Continue agitation.
5. If a flowable formulation is used, add slowly through screen into the tank.
Mixing and compatibility may be improved when flowable is pre-mixed one
part flowable with one part water and added to the tank in diluted form.
6. Add this product slowly through the screen into the tank. Mixing and
compatibility may be improved when this product is prediluted with two
parts of water and added to the tank in diluted form.
7. Complete filling the sprayer tank with carrier. If a Roundup ® agricultural
herbicide or a Gramoxone brand herbicide is used, add the required amount
near the end of the filling process. Remove hose from tank immediately after
filling to avoid siphoning back into the carrier source.
Maintain good agitation at all times until the contents of the tank are sprayed.
NOTE: If spray mixture is allowed to settle at any time, thorough agitation is
required to resuspend the mixture before spraying is resumed.  Keep by-pass
line on or near bottom of tank to minimize foaming. Screen size in nozzle or line
strainers must be 50-mesh. Carefully select proper nozzle to avoid spraying a
fine mist. Check for even distribution of spray droplets. To reduce loss of the
chemical due to drift of a fine mist, apply at nozzle pressures below 40 psi.
9.0 APPLICATION SYSTEMS
9.1 Ground Broadcast Treatment
Apply this product and the labeled tank mixtures in 10 or more gallons of
solution per acre using broadcast boom equipment. Do not apply during
periods of gusty winds, when winds are in excess of 15 miles per hour or
when other conditions favoring drift exist.
9.2 Aerial Application Equipment:
 Fixed-Wing and Helicopter
Unless otherwise prohibited, all applications of Warrant Herbicide described
on this label or in separately published supplemental labeling for this product
may be made using aerial application equipment where appropriate, provided
that the applicator complies with the precautions and restrictions specified on
this label and on separate supplemental labeling published for this product.
Aerial applications of this product may be made in the following listed states
only, or only in other states listed on seperately published aerial application
supplemental labeling for this product:
Alabama, Arkansas, Colorado, Georgia, Kansas, Kentucky, Louisiana,
Mississippi, Missouri, Nebraska, North Carolina, North Dakota,
Oklahoma, South Carolina, Tennessee, Texas, and Virginia
Do not apply Warrant Herbicide using aerial application equipment except
under conditions specified on this label or in separately published aerial
application supplemental labeling for this product.
Apply this product at the appropriate rate as directed on this label in 3 to
15 gallons of water per acre unless otherwise directed on this label or in
separate supplemental labeling or Fact Sheets published for this product.
Unless otherwise specified, do not exceed 2 quarts of this product per acre
when using aerial application equipment. Refer to the individual use area
sections of this label for application rates, spray volumes and additional use
instructions.
Ensure uniform application. To avoid streaked, uneven or overlapped
application, use appropriate marking devices.
AERIAL SPRAY DRIFT MANAGEMENT
The following drift management requirements must be followed to avoid
off-target drift movement from aerial application to agricultural field crops.
1. The distance of the outermost nozzles on the boom must not exceed
 3/4 the length of the wingspan or rotor.
2. Nozzles must always point backward, parallel with the air stream and
never be pointed downwards more than 45 degrees. Where States have
more stringent regulations, they should be observed.
Importance of Droplet Size
The most effective way to reduce drift potential is to apply large droplets.
The best drift management strategy is to apply the largest droplets that
provide sufficient coverage and control. Applying larger droplets reduces drift
potential but will not prevent drift if the application is made improperly, or
under unfavorable environmental conditions (see the “Wind”, “Temperature
and Humidity” and “Temperature Inversions” sections of this label).
Controlling Droplet Size
• Volume: Use high flow rate nozzles to apply the highest practical spray
volume. Nozzles with the higher rated flows produce larger droplets.
• Pressure: Use the lower spray pressure listed for the nozzle. Higher pressure
reduces droplet size and does not improve canopy penetration. When higher
flow rates are needed, use higher flow rate nozzles instead of increasing
pressure.
• Number of nozzles:  Use the minimum number of nozzles that provide
uniform coverage.
• Nozzle orientation:  Orienting nozzles so that the spray is released
backwards, parallel to the air stream, will produce larger droplets than
other orientations. Significant deflection from the horizontal will reduce
droplet size and increase drift potential.
• Nozzle type:  Use a nozzle type that is designed for the intended
application. With most nozzle types, narrower spray angles produce larger
droplets. Consider using low-drift nozzles. Solid stream nozzles oriented
straight back produce larger droplets than other nozzle types.
• Boom length: For some use patterns, reducing the effective boom length
to less than 3/4 of the wingspan or rotor length could further reduce drift
without reducing swath width.
• Application height:  Application must be made at a height of 10 feet or
less above the top of the largest plants unless a greater height is required
for aircraft safety. Making the application at the lowest height that is safe
reduces the exposure of the droplets to evaporation and wind.
Swath Adjustment
When an application is made with a crosswind present, the swath will be
displaced downwind. Therefore, on the up and downwind edges of the field,
the applicator must compensate for this displacement by adjusting the path of
the aircraft upwind. Increase the swath adjustment distance with increasing
drift potential (higher wind, smaller droplets, etc.).
Wind
Drift potential is lowest between wind speeds of 2 to 10 miles per hour.
However, many factors, including droplet size and equipment type, determine
drift potential at any given speed. Avoid application when wind speeds are
below 2 miles per hour due to variable wind direction and high inversion
potential. NOTE: Local terrain can influence wind patterns. Every applicator
must be familiar with local wind patterns and how they affect drift.
Temperature and Humidity
When making applications in low relative humidity, set up equipment to
produce larger droplets to compensate for evaporation. Droplet evaporation
is most severe when conditions are both hot and dry.
Temperature Inversions
Do not apply during a temperature inversion because drift potential is high.
Temperature inversions restrict vertical air mixing, which causes small,
suspended droplets to remain in a concentrated cloud. This cloud can
move in unpredictable directions due to the light variable winds common
during inversions. Temperature inversions are characterized by increasing
temperatures with altitude and are common on nights with limited cloud cover
and light to no wind. They begin to form as the sun sets and often continue
into the morning. Their presence can be indicated by ground fog; however, if
fog is not present, inversions can also be identified by the movement of smoke
from a ground source or an aircraft smoke generator. Smoke that layers and
moves laterally in a concentrated cloud (under low wind conditions) indicates
an inversion, while smoke that moves upward and rapidly dissipates indicates
good vertical air mixing.
Sensitive Areas
Apply this product only when the potential for drift to adjacent sensitive
areas (e.g., residential areas, bodies of water, known habitat for threatened
or endangered species, non-target crops) is minimal (e.g., when wind is
blowing away from the sensitive areas).
Aircraft Maintenance
Thoroughly wash aircraft, especially landing gear, after each day of spraying
to remove residues of this product accumulated during spraying or from
spills. PROLONGED EXPOSURE OF THIS PRODUCT TO UNCOATED STEEL
SURFACES COULD RESULT IN CORROSION AND POSSIBLE FAILURE OF THE
PART. LANDING GEAR IS MOST SUSCEPTIBLE. The maintenance of an organic
coating (paint) that meets aerospace specification MIL-C-38413 can help
prevent corrosion.
9.3 Center Pivot Application Equipment
All treatments described on this label or separately published supplemental
labeling for this product may be made using center pivot irrigation equipment
where appropriate, provided that the applicator complies with the precautions
and restrictions specified on this label and in separate supplemental labeling
published for this product.
This product alone or in tank mixture with other herbicides on this label,
which are registered for center pivot application, may be applied using center
pivot irrigation systems. Do not apply this product through any other type
of irrigation system.
Ensure that the soil type and depth to ground water comply with the following
restriction.  On the following soil types, do not apply this product within 50 feet
of any well where the depth to ground water is 30 feet or less: sands with less
than 3 percent organic matter; loamy sands with less than 2 percent organic
matter; or sandy loams with less than 1 percent organic matter.
7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

5
Crop injury, lack of effectiveness, or illegal pesticide residues in the crop can
result from non-uniform distribution of treated water. Use only in systems
that apply uniformly.
If you have questions about calibration, you should contact State Extension
Service specialists, equipment manufacturers or other experts.
Do not chemigate through systems connected to a public water system.
A person knowledgeable of the chemigation system and responsible for its
operation, or under the supervision of the responsible person, shall shut
the system down and make necessary adjustments should the need arise.
Do not apply when system connections or fittings leak, when nozzles do not
provide uniform distribution or when the line containing the product must be
dismantled and drained.
The system must contain a functional check valve, vacuum relief valve and
low-pressure drain appropriately located on the irrigation pipeline to prevent
water source contamination from back flow.
The pesticide injection pipeline must contain a functional, automatic, quick-
closing check valve to prevent the flow of fluid back toward the injection
pump.
The pesticide injection pipeline must also contain a functional, normally
closed, solenoid operated valve located on the intake side of the injection
pump and connected to the system interlock to prevent fluid from being
withdrawn from the supply tank when the irrigation system is either
automatically or manually shut down.
The system must contain functional interlocking controls to automatically shut
off the pesticide injection pump when the water pump motor stops.
The irrigation line or water pump must include a functional pressure switch
that will stop the water pump motor when the water pressure decreases to
the point where pesticide distribution is adversely affected.
Systems must use a metering pump, such as a positive displacement
injection pump (e.g., diaphragm pump) effectively designed and constructed
of materials that are compatible with pesticides and capable of being fitted
with a systems interlock. Pumps, injection equipment, agitation equipment,
hoses and connections between supply tank and the point of injection must be
constructed of materials which are resistant to this product.
Meter this product or a labeled tank-mixture of this product into the center
pivot irrigation system after planting and before crop emergence. Herbicide
application should be made in 1/2 to 3/4 inch of water per acre. Do not apply
in more than 3/4 inch of water per acre under any conditions or reduced
performance may occur. On very sandy soils (more than 60 percent sand
and less than 1 percent organic matter), use a maximum of 1/2 inch water
per acre. Good agitation must be maintained during the entire application
period. Flush the system with water when application is complete. Refer
to the “MIXING, SPRAYING AND HANDLING” section of the label for mixing
procedures.
Do not apply this product in a tank-mixture through center pivot irrigation
unless the treatment is specifically recommended on the label of the tank
mixture product.
9.4 Cultivation Information
Delay cultivation after application of this product for as long as possible unless
weeds or grasses emerge. Shallowly cultivate or rotary hoe immediately if
weeds or grasses emerge. If cultivation is necessary because of soil crusting
or compaction, set equipment shallow and minimize lateral soil movement to
avoid dilution or displacement of the herbicide treatment.
10.0 APPLICATION TIMING AND METHODS
10.1 Preplant, At-Planting, and Preemergence
 Surface Application
Where specified, applications of this product may be made prior to planting,
at-planting, or prior to emergence of the crops listed on this label or in
separately published supplemental labeling. Warrant Herbicide will not control
emerged weeds so it must be applied to a weed-free soil surface or in a
tank-mixture with products that provide postemergence control of weeds at
the time of application. Read and follow all restrictions and directions on tank-
mix product labels. Precipitation or overhead sprinkler irrigation is required
after application to move the herbicide into the weed germination zone to
control un-emerged weeds.  The amount of precipitation or irrigation required
depends on existing soil moisture, soil type and percent organic matter
content, but 1/2 to 3/4 inch is normally adequate. Do not utilize mechanical
incorporation unless specifically recommended on this label or on separately
published supplemental labeling for this product. If weeds emerge after
treatment, rotary hoe or shallowly cultivate to control weeds.
10.2 Postemergence Surface Application
Postemergence surface applications of this product must be made
postemergence to the crop but prior to weed seedling emergence or in a
tank mixture that controls emerged weeds. Warrant Herbicide will not control
emerged weeds so it must be applied to a weed-free soil surface or in a tank-
mixture with products that provide postemergence control of weeds at the
time of application. Read and follow all restrictions and directions on tank-mix
product labels. Precipitation or overhead sprinkler irrigation is required after
application to move the herbicide into the weed germination zone to control
un-emerged weeds. The amount of precipitation or irrigation required depends
on existing soil moisture, soil type and percent organic matter content, but
1/2 to 3/4 inch is normally adequate.  If weeds emerge after treatment, rotary
hoe or shallowly cultivate to control weeds.
NOTE: DO NOT make postemergence surface applications using sprayable
fluid fertilizer as the carrier because severe crop injury may occur.
11.0 WEEDS CONTROLLED
When applied as directed under conditions described, this product and tank
mixtures of this product will control or reduce competition from the weeds listed.
NOTE: C = Control    R = Reduced Competition
11.1 Annual Grasses
Barnyardgrass
 Echinocloa crus-galli           C
Crabgrass
 Digitaria ischaemum           C
Crowfootgrass
 Dactyloctenium aegyptium (L.)
  Willd.           C
Cupgrass, prairie
 Eriochloa contracta Hitchc           C
Foxtail:
 giant Setaria faberi
 green robust purple,
 robust white Setaria viridis
 yellow Setaria lutescens                 C
Goosegrass
 Eleusine indica           C
Johnsongrass, seedling
 Sorghum halepense           R
Millet: foxtail
 Setaria italica           R
Oat, wild
 Avena fatua           R
Panicum:
  browntop, Panicum fasciculatum
  fall, Panicum dichotomiflorum        C
Panicum, Texas
  Panicum texanum   R
Rice, red
  Oryza sativa   C
Sandbur; Grassbur
  Cenchrus incertus   R
Shattercane; Wild cane
  Sorghum bicolor   R
Signalgrass, broadleaf
  Brachiaria platyphylla   C
Sprangletop, red
  Leptochloa filiformis   C
Wheat, volunteer
  Triticum aestivum   R
Witchgrass
  Panicum capillare L.   C
11.2 Annual Broadleaves
Beggarweed, Florida
 Desmodium tortuosum R
Carpetweed
 Mollugo verticillata C
Galinsoga
 Galinsoga spp. C
Groundcherry, cutleaf
 Physalis angulata R
Henbit
 Lamium amplexicaule C
Lambsquarters
 Chenopodium album C
Nightshade,
 black, Solanum nigrum
 hairy, Solanum sarrachoides   C
Pigweed: Carelessweed
Amaranthus spp.                       C
Purslane
Portulaca oleracea                     C
Pusley, Florida
Richardia scabra                       C
Sida, prickly; Teaweed
Sida spinosa                              R
Smartweed
Polygonum pensylvanicum        R
Starbur, bristly
Acanthospermum hispidum       R
Waterhemp
Amaranthus tuberculatus          C
7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

6
12.0 ALFALFA
12.1 Warrant Herbicide for Postemergence Use
 in Alfalfa
New Stand Establishment (Seeding Year):
For fall-planted alfalfa, including Roundup Ready alfalfa, this product may
be applied at 1.25 to 2 quarts per acre up to or at the 4th-trifoliate stage
following emergence of the new stand, or following green-up or re-growth the
following spring.  Wait a minimum of 20 days after application before cutting
for forage or hay, or before open grazing of forage by livestock.
For spring-planted alfalfa, including Roundup Ready alfalfa, this product
may be applied at 1.25 to 2 quarts per acre up to or at the 4th-trifoliate
stage following emergence of the new stand. Wait a minimum of 20 days
after application before cutting for forage or hay, or before open grazing of
forage by livestock.
After either the first or second cutting in the seeding year, but no later
than 7 days after the cutting,  a sequential application of this product may
be made at 1.25 to 2 quarts per acre.  Wait a minimum of 20 days between
application and cutting for forage or hay, or before open grazing of forage
by livestock.
Do not exceed a maximum of 2 quarts per acre of this product in any single
application.
Do not exceed a total of 3 applications of this product per alfalfa growing
season.
Do not exceed a combined total of 4 quarts (3 lbs a.i.) per acre per year in a
newly established stand (seeding year) when making multiple applications of
this product or other acetochlor containing products.
Remove domestic livestock from alfalfa stands before making applications
of this product.
Do no use this product on alfalfa grown for seed production.
Application of this product followed by conditions that do not foster adequate
stand growth or which cause stress (cold, wet soils), waterlogged conditions,
excessive irrigation or rainfall, may result in crop injury.
The user is responsible to ensure that the alfalfa stand is at a desirable level
before using Warrant Herbicide.
If Warrant Herbicide has been applied and the alfalfa stand fails due to
adverse weather or any other reasons, replanting alfalfa or sugar beet is not
recommended.
See the “Replanting and Rotational Crops” section of the main label booklet
for this product for a list of crops that may be replanted immediately.
Established Alfalfa Stands (Non-Seeding Year):
This product may be applied postemergence (in-crop) after spring green-up in
established stands of all varieties of alfalfa, including Roundup Ready alfalfa.
This product may be applied broadcast over top of the alfalfa stand according
to the rate table listed below.  Applications of this product may be made
between cuttings, and no later than 7 days after a cutting, at a rate of 1.25
to 2 quarts per acre.  Remove any previously cut forage or hay from the field
before making an application.
Allow a minimum of 20 days between an application and subsequent cutting
for forage or hay, or before open grazing of forage by livestock.
Do not exceed a maximum of 2 quarts (1.5 lbs a.i.) per acre of this product
as a single application.
Do not exceed a total of 3 applications of this product per alfalfa growing
season.
Do not exceed a combined total of 4 quarts (3 lbs a.i.) per acre per year in
established stands when making multiple applications of this product or other
acetochlor containing products.
The user should take care to ensure that stand is at a desirable level before
using Warrant Herbicide.  If Warrant Herbicide has been applied and the stand
fails due to adverse weather or any other reasons, replanting alfalfa or sugar
beet is not recommended.  See the “Replanting and Rotational Crops” section
of the label for a list of crops that may be replanted immediately.
SOIL TEXTURAL
GROUP
BROADCAST APPLICATION RATES PER ACRE*
Less than 1.5%
Organic Matter (quarts)
1.5% or More
Organic Matter (quarts)
Coarse 1.25 to 1.6 1.25 to 1.7
Medium 1.25 to 1.7 1.25 to 1.9
Fine 1.25 to 1.9 1.25 to 2.0
* Use the higher rate in the range for areas of heavy weed infestation.
12.2 Warrant Herbicide Tank-Mixtures for  Postemergence Use in Alfalfa
It is the applicator’s responsibility to ensure that all products used in a
tank mixture with this product are registered for the specific postemergence
application timing in alfalfa.  Read and follow all applicable restrictions and
limitations and directions for use involving tank mixing on all product labels
included in the tank mixture, including any applicable crop injury precautions.
The end-user must follow the most restrictive directions for use and
precautionary statements on the labeling of each product in the tank mixture.
This product may be applied postemergence to alfalfa in a tank-mix with one
or more of the active ingredients listed below to expand weed control spectrum
or for control of emerged weeds at the time of application.
 2,4-DB, clethodim, imazamox, imazethapyr
Warrant Herbicide may be applied postemergence to Roundup Ready alfalfa in
a tank-mixture with the active ingredient listed below, or one of the products
listed below.
glyphosate, Roundup PowerMAX ® (EPA Reg. No. 524-549), Roundup
PowerMAX® II (EPA Reg. No. 524-537), Roundup PowerMAX ® 3 (EPA Reg.
No. 524-659), Roundup WeatherMAX® (EPA Reg. No.524-537)]
Application of Warrant Herbicide in tank mixture with products not
recommended on this label or to soils where other applications of soil applied
herbicides have been made may increase the potential for injury with this
product.
13.0 FIELD CORN, POPCORN, PRODUCTION SEED
 CORN, AND SILAGE CORN
13.1 Warrant Herbicide for Preplant, At-Planting,
 or Preemergence Applications in Corn
Applications of this product may be made preplant, at-planting, or preemergence
in field corn in the following listed states only, or only in other states listed on
seperately published supplemental labeling for this product:
Alabama, Arkansas, Georgia, Hawaii, Louisiana,
Mississippi, New Mexico, North Carolina, Oklahoma,
South Carolina, Tennessee, Texas, and Virginia
When applied preplant, at-planting, or preemergence in field corn and
production seed corn, including Corn Hybrids with Roundup Ready
2 Technology, this product will provide preemergence control or reduced
competition of the annual weeds listed in the “WEEDS CONTROLLED”
section of this label. If weeds are emerged at the time of application, apply a
labeled postemergence herbicide to control emerged weeds. Use of a residual
herbicide for the control of weeds not listed on this label is recommended.
Applications may be made in a tank mixture with the products listed below.
Observe all directions for use, precautions, and restrictions on the labeling of
the tank mixed postemergence herbicide or residual herbicide.
Approved Application Systems
Ground: Broadcast boom
Aerial:       Fixed-wing and helicopter.  Allowed in selected states only -
                 see Aerial Application Equipment Section of this label for
                 additional information.
Approved Application Methods
Preplant, At-planting or Preemergence Surface
Warrant Herbicide may be applied preplant, at-planting or preemergence
to field corn and production seed corn at 1.5 to 3 quarts per acre (qts/A)
according to the rate table below. Apply broadcast to the soil surface
according to the rate table listed below. Mechanical incorporation is not
recommended. This product applied alone will not control emerged weeds.
Application of this product, followed by conditions that do not favor adequate
crop growth, or which cause stress (cold, wet soils), or under waterlogged
conditions from excessive irrigation or rainfall, may result in crop response.
Do not apply if these conditions are forecast within 10 days of application.
Application of this product with other residual herbicides may increase the
potential for crop injury.
Application Rates (minimum and maximum range)
SOIL TEXTURAL
GROUP
BROADCAST RATE PER ACRE*
Less than 3%
Organic Matter (quarts)
3% or More
Organic Matter (quarts)
Coarse 1.5 to 2.0 2.0
Medium 1.5 to 2.75 2.0 to 2.75
Fine 1.5 to 2.75 2.75 to 3.0
*Use the higher rate in the range for areas of heavy weed infestation.
13.2 Warrant Herbicide Tank Mixtures for
 Preplant, At-Planting, or Preemergence Use
 in Corn
It is the applicator’s responsibility to ensure that all products used in a
tank mixture with this product are registered for the specific preplant or
preemergence application timing in corn.  Read and follow all applicable
restrictions and limitations and directions for use involving tank mixing on
all product labels included in the tank mixture, including any applicable crop
injury precautions. The end-user must follow the most restrictive directions
for use and precautionary statements on the labeling of each product in the
tank mixture.
This product may be applied preplant, at-planting or preemergence in a tank-
mixture with one or more of the active ingredients listed below, or one or more
of the products listed below, for improved residual weed control spectrum
in field corn:
2,4-D, atrazine, carfentrazone-ethyl, dicamba, diflufenzopyr, flumiclorac
pentyl ester, glyphosate, isoxaflutole, linuron, mesotrione, paraquat,
pendimethalin, simazine, thiencarbazone-methyl,
Balance ® Flexx (EPA Reg. No. 264-1067), Corvus ® (EPA Reg. No.
264-1066), DiFlexx™ (EPA Reg. No. 264-1173), Roundup PowerMAX ®
(EPA Reg. No. 524-549), Roundup PowerMAX® II (EPA Reg. No. 524-537),
Roundup PowerMAX® 3 (EPA Reg. No. 524-659), Roundup WeatherMAX ®
(EPA Reg. No.524-537)
13.3 Warrant Herbicide for Postemergence Use in
 Field Corn
This product, when applied postemergence in field corn and production seed corn,
including Corn Hybrids with Roundup Ready 2 Technology, as one or two applications, will
provide preemergence control or reduced competition of the annual grasses and broadleaf
weeds listed in the “WEEDS CONTROLLED” section of this label.  If weeds are emerged at
time of application, apply a labeled postemergence herbicide with this product to control
the emerged weeds.  Observe the directions for use, precautions and restrictions on the
label of the postemergence herbicide.
Approved Application Systems
Ground: Broadcast boom
Aerial:       Fixed-wing and helicopter.  Allowed in selected states only -
                 see Aerial Application Equipment Section of this label for
                 additional information.
7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

7
Approved Application Methods
Postemergence Surface
Apply this product prior to weed emergence in emerged field corn, including Corn Hybrids
with Roundup Ready 2 Technology.  The product may be applied from seedling emergence
until the corn reaches 30 inches in height.  Directed spray may be used to minimize
interference of spray by crop and to increase soil coverage.  Drop nozzles will provide
optimum spray coverage and weed control when corn height is 24 to 30 inches.  Use rates
are defined in the table below.  Use the higher rate on larger weeds and where heavy weed
infestations exist.  Weeds emerged at the time of application are not controlled by this
product.  If weeds are emerged at application, apply a labeled postemergence herbicide
with this product to control the emerged weeds, or shallowly cultivate or rotary hoe to
improve performance.  See section of this label for recommended tank mix products for
postemergence applications in field corn.
Apply Warrant Herbicide broadcast over-the-top or directed to the soil surface, according to
the rate table listed below.  An application before weeds emerge, or after clean cultivation
is necessary as this product will not control emerged weeds.
DO NOT apply Warrant Herbicide on sweet corn.
DO NOT exceed 4 quarts (3 lbs acetochlor) per acre per year of acetochlor when making
multiple applications.
DO NOT make postemergence surface applications using sprayable fluid fertilizer as the
carrier because severe crop injury may occur.
DO NOT graze treated area or feed treated forage to livestock for 40 days following
application of this product.
Application Rates (minimum and maximum range)
SOIL TEXTURAL
GROUP
BROADCAST RATE PER ACRE*
Less than 3%
Organic Matter (quarts)
3% or More
Organic Matter (quarts)
Coarse 1.5 to 2.0 2.0
Medium 1.5 to 2.75 2.0 to 2.75
Fine 1.5 to 2.75 2.75 to 3.0
* Use the higher rate in the range for areas of heavy weed infestation.
13.4 Warrant Herbicide Tank-Mixtures for
 Postemergence Use in Corn (All Types)
It is the applicator’s responsibility to ensure that all products used in a
tank mixture with this product are registered for the specific postemergence
application timing in corn.  Read and follow all applicable restrictions and
limitations and directions for use on all product labels included in the tank
mixture, including any applicable crop injury precautions. The end-user must
follow the most restrictive directions for use and precautionary statements on
the labeling of each product in the tank mixture.
This product may be tank-mixed with one or more of the active ingredients
listed below, or one or more of the products listed below, for postemergence
applications in corn (all types):
2,4-D, atrazine, carfentrazone-ethyl, clopyralid, dicamba, diflufenzopyr,
flumetsulam, flumiclorac pentyl ester, isoxaflutole, mesotrione,
tembotrione, thiencarbazone-methyl, topramezone,
Balance® Flexx (EPA Reg. No. 264-1067), Capreno ® (EPA Reg. No.
264-1063), Corvus ® (EPA Reg. No. 264-1066), DiFlexx™ (EPA Reg. No.
264-1173), DiFlexx™ DUO (EPA Reg. No. 264-1184), Laudis ® (EPA Reg.
No. 264-860)]
This product may be applied postemergence to corn in a tank-mixture with the
active ingredient listed below, or one of the products listed below, when used
on field corn hybrids with Roundup Ready 2 Technology.
glyphosate, Roundup PowerMAX ® (EPA Reg. No. 524-549), Roundup
PowerMAX® II (EPA Reg. No. 524-537), Roundup PowerMAX® 3 (EPA Reg.
No. 524-659), Roundup WeatherMAX® (EPA Reg. No.524-537)
14.0 COTTON
14.1 Warrant Herbicide for Preplant,
 At-Planting, or Preemergence Use in Cotton
When applied preplant, at-planting, or preemergence to cotton, as one or
two applications, this product will provide preemergence control or reduced
competition of the annual grasses and broadleaf weeds listed in the “WEEDS
CONTROLLED” section of this label.  If weeds are emerged at time of
application apply a labeled postemergence herbicide with this product to
control the emerged weeds.  Use of a residual herbicide for the control of
weeds not listed on this label is recommended.  Applications may be made
in a tank mixture with the products listed below. Observe the directions for
use, precautions and restrictions on the label of the tank mixture herbicide.
Approved Application Systems
Ground: Broadcast boom
Aerial:       Fixed-wing and helicopter.  Allowed in selected states only -
                 see Aerial Application Equipment section of this label for
                 additional information.
Approved Application Methods
Preplant, At-planting or Preemergence Surface
Warrant Herbicide may be applied preplant, at-planting or preemergence to
cotton at 1.25 to 2 quarts per acre (qts/A) according to the rate table below.
The optimum rate of application is 1.5 qts/A. Apply broadcast to the soil
surface according to the rate table listed below.  Mechanical incorporation is
not recommended. This product will not control emerged weeds.
Application of this product with other postemergence or soil applied herbicides
may increase the potential for crop injury.
Application of this product followed by conditions that do not favor adequate
crop growth or which cause stress (cold, wet soils), or under waterlogged
conditions from excessive irrigation or rainfall, may result in crop injury.
DO NOT exceed 4 quarts (3 lbs acetochlor) per acre per year when making a
second application, including a postemergence application in cotton.
Application Rates (minimum and maximum range)
SOIL TEXTURAL
GROUP
BROADCAST RATE PER ACRE*
Less than 1.5%
Organic Matter (quarts)
1.5% or More
Organic Matter (quarts)
Coarse 1.25 to 1.6 1.25 to 1.7
Medium 1.25 to 1.7 1.25 to 1.9
Fine 1.25 to 1.9 1.25 to 2.0
* Use the higher rate in the range for areas of heavy weed infestation.
14.2 Warrant Herbicide Tank Mixtures for
 Preplant, At-Planting, or Preemergence Use
 in Cotton
It is the applicator’s responsibility to ensure that all products used in a
tank mixture with this product are registered for the specific pre-plant or
preemergence application timing in cotton. Read and follow all applicable
restrictions and limitations and directions for use involving tank mixing on
all product labels included in the tank mixture, including any applicable crop
injury precautions. The end-user must follow the most restrictive directions
for use and precautionary statements on the labeling of each product in the
tank mixture.
This product may be tank mixed with one or more of the active ingredients
listed below, or one of the products listed below, when applied preplant, at-
planting, or preemergence in cotton.
diuron, fluometuron, flumioxazin, fomesafen, glyphosate, paraquat,
pendimethalin, prometryn, pyrithiobac-sodium,
Roundup PowerMAX ® (EPA Reg. No. 524-549), Roundup PowerMAX ®
II (EPA Reg. No. 524-537), Roundup PowerMAX ® 3 (EPA Reg. No.
524-659), Roundup WeatherMAX® (EPA Reg. No.524-537), RT 3®
(EPA Reg. No. 524-544)
14.3 Warrant Herbicide for Postemergence Use
 in Cotton
When applied postemergence to cotton, as one or two applications, this
product will provide preemergence control or reduced competition of the
annual grasses and broadleaf weeds listed in the “WEEDS CONTROLLED”
section of this label.  If weeds are emerged at time of application apply a
labeled postemergence herbicide with this product to control the emerged
weeds.  Use of a residual herbicide for the control of weeds not listed on this
label is recommended.  See sections of this label for recommended tank mix
products for postemergence applications in cotton. Observe the directions for
use, precautions and restrictions on the label of the postemergence herbicide.
Approved Application Systems
Ground:   Broadcast boom
Aerial:     Fixed-wing and helicopter.  Allowed in selected states only - see
                  Aerial Application Equipment section of this label for additional
               information.
Approved Application Methods
Postemergence Surface
Apply this product postemergence to cotton and prior to weed emergence.
The application should be made after cotton is completely emerged but
before cotton reaches first bloom.  Apply this product when crop is small or
direct spray to the soil surface to minimize interference of spray by crop. The
optimum timing and rate of application is when cotton is in 2 to 3 leaf stage
or prior to weed emergence at 1.5 qts/A.  Directed applications may be used
to increase soil coverage and canopy penetration after cotton reaches 5 to
6 leaf stage.  Use rates are defined in the table below.  Use the higher
rate where heavy weed infestations exist. Weeds emerged at the time
of application are not controlled by this product. If weeds are emerged at
application, apply a labeled postemergence herbicide with this product to
control the emerged weeds or shallowly cultivate or rotary hoe to improve
performance.  See sections of this label for recommended tank mix products
for postemergence over-the-top and post-direct applications in cotton.
Apply this product broadcast over-the-top or directed to the soil surface,
according to the rate table listed below.  Application before weeds emerge, or
after clean cultivation is necessary as this product will not control emerged
weeds.
In sprinkler-irrigated areas, sprinkler irrigate after application with
1/2-3/4 inch of water (½ inch on coarse-textured soils to 3/4 inch on
fine-textured soils) to incorporate product.  In furrow-irrigated areas, apply
product, incorporate with a rolling cultivator or similar implement that
provides uniform shallow incorporation (2 inches or less), and then irrigate.
In non-irrigated areas, if at least ½ inch of rainfall does not occur within
10 days after application, cultivate with a rolling cultivator or similar
implement that provides shallow incorporation of the product.
DO NOT make postemergence surface applications using sprayable fluid
fertilizer as the carrier because severe crop injury may occur.
DO NOT graze treated area or feed treated cotton forage to livestock following
application of this product.
DO NOT exceed 4 quarts (3 lbs acetochlor) per acre per year when making
a second application.
Application Rates (minimum and maximum range)
SOIL TEXTURAL
GROUP
BROADCAST RATE PER ACRE*
Less than 1.5%
Organic Matter (quarts)
1.5% or More
Organic Matter (quarts)
Coarse 1.25 to 1.6 1.25 to 1.7
Medium 1.25 to 1.7 1.25 to 1.9
Fine 1.25 to 1.9 1.25 to 2.0
* Use the higher rate in the range for areas of heavy weed infestation.
7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

8
14.4 Warrant Herbicide Additional Tank-Mixtures
 for Postemergence Over-The-Top Use
 in Cotton
It is the applicator’s responsibility to ensure that all products used in a
tank mixture with this product are registered for the specific postemergence
application timing in cotton. Read and follow all applicable restrictions and
limitations and directions for use involving tank mixing on all product labels
included in the tank mixture, including any applicable crop injury precautions.
The end-user must follow the most restrictive directions for use and
precautionary statements on the labeling of each product in the tank mixture.
This product may be tank-mixed with one or more of the active ingredients
listed below when applied postemergence over-the-top in cotton:
clethodim, fluazifop-P-butyl, pyrithiobac sodium, quizalofop-P-ethyl,
trifloxysulfuron-sodium.
This product may be applied over-the-top postemergence to cotton in a tank-
mixture with one or more of the active ingredients listed below, or one or more
of the products listed below, when used on cotton with XtendFlex® technology
glufosinate-ammonium, glyphosate
Liberty® (EPA Reg. No. 7969-448), Roundup PowerMAX ® (EPA Reg. No.
524-549), Roundup PowerMAX ® II (EPA Reg. No. 524-537), Roundup
PowerMAX ® 3 (EPA Reg. No. 524-659), Roundup WeatherMAX ®
(EPA Reg. No.524-537)
14.5 Warrant Herbicide Tank-Mixtures for
 Post-Directed Use in Cotton
It is the applicator’s responsibility to ensure that all products used in a
tank mixture with this product are registered for the specific post-directed
application timing in cotton. Read and follow all applicable restrictions and
limitations and directions for use involving tank mixing on all product labels
included in the tank mixture, including any applicable crop injury precautions.
The end-user must follow the most restrictive directions for use and
precautionary statements on the labeling of each product in the tank mixture.
This product may be tank-mixed with one or more of the active ingredients
listed below, or one of the products listed below, when applied post-directed
in cotton:
carfentrazone-ethyl, diuron, flumioxazin, glufosinate-ammonium,
glyphosate, MSMA, prometryn, pyrithiobac sodium, trifloxysulfuron-sodium
Roundup PowerMAX® (EPA Reg. No. 524-549), Roundup PowerMAX ® II
(EPA Reg. No. 524-537), Roundup PowerMAX® 3 (EPA Reg. No. 524-659),
Roundup WeatherMAX® (EPA Reg. No.524-537).
15.0 PEANUT
15.1 Warrant Herbicide for Preplant, At-Planting,
 or Preemergence Use in Peanut
This product, when applied preplant, at-planting, or preemergence in peanut will
provide preemergence control or reduced competition of the annual weeds listed
in the “WEEDS CONTROLLED” section of this label.  If weeds are emerged at the
time of application, apply a labeled postemergence herbicide with this product
to control the emerged weeds. Observe the directions for use, precautions, and
restrictions on the label of the postemergence herbicide.
Approved Application Systems
Ground: Broadcast boom
Aerial:       Fixed-wing and helicopter.  Allowed in selected states only -
                 see Aerial Application Equipment section of this label for
                 additional information.
Approved Application Methods
Preplant, At-planting, or Preemergence Surface
This product may be applied preplant, at-planting, or preemergence to peanut at
1.25 to 2 quarts (0.94 to 1.5 lbs a.i.) per acre.  Apply broadcast to the soil surface
according to the rate table listed below.
Application of Warrant Herbicide followed by conditions that do not foster
adequate crop growth, or cause stress (cold, wet soils), waterlogged
conditions, excessive irrigation or rainfall, may result in crop injury.
Application made before weeds emerge, or after clean cultivation, is
necessary, as this product will not control emerged weeds.
DO NOT exceed a total of 4 quarts (3 lbs acetochlor) per acre per season when
making multiple applications.
Do not exceed a total of 3 applications per season.
Allow a minimum of 90 days between last application and grazing or feeding
of peanut hay to livestock.
Application Rates (minimum and maximum range)
SOIL TEXTURAL
GROUP
BROADCAST RATE PER ACRE*
Less than 1.5%
Organic Matter (quarts)
1.5% or More
Organic Matter (quarts)
Coarse 1.25 to 1.6 1.25 to 1.7
Medium 1.25 to 1.7 1.25 to 1.9
Fine 1.25 to 1.9 1.25 to 2.0
*Use the higher rate in the range for areas of heavy weed infestation.
15.2 Warrant Herbicide Tank Mixtures for
 Preplant, At-Planting, or Preemergence Use
 in Peanut
It is the applicator’s responsibility to ensure that all products used in a
tank mixture with this product are registered for the specific preplant or
preemergence application timing in peanut. Read and follow all applicable
restrictions and limitations and directions for use involving tank mixing on
all product labels included in the tank mixture, including any applicable crop
injury precautions. The end-user must follow the most restrictive directions
for use and precautionary statements on the labeling of each product in the
tank mixture.
This product may be applied early preplant or preemergence to peanut in a
tank-mixture with one or more of the active ingredients listed below, or one
of the products listed below:
diclosulam, ethalfluralin, flumioxazin, glyphosate, paraquat, pendimethalin,
trifluralin
Roundup PowerMAX® (EPA Reg. No. 524-549), Roundup PowerMAX ® II
(EPA Reg. No. 524-537), Roundup PowerMAX® 3 (EPA Reg. No. 524-659),
Roundup WeatherMAX® (EPA Reg. No.524-537)
Preplant soil incorporated applications together with Prowl ® H2O (EPA Reg.
No. 241-418), Sonalan® HFP (EPA Reg. No. 101063-356), Strongarm® (EPA
Reg. No. 62719-288), or Treflan ® 4EC (EPA Reg. No. 5905-532) are not
recommended due to risk of crop injury and reduced weed control.
Application of Warrant Herbicide in a tank mixture with other products, or to
soils where other applications of soil applied herbicides have been made, may
increase the potential for injury with this product.
15.3 Warrant Herbicide for Postemergence Use
 in Peanut
This product, when applied postemergence in peanut will provide
preemergence control or reduced competition of the annual weeds listed in
the “WEEDS CONTROLLED” section of this label.  If weeds are emerged at the
time of application, apply a labeled postemergence herbicide with this product
to control the emerged weeds.  Observe the directions for use, precautions,
and restrictions on the label of the postemergence herbicide.
Approved Application Systems
Ground: Broadcast boom
Aerial:       Fixed-wing and helicopter.  Allowed in selected states only -
                 see Aerial Application Equipment section of this label for
                 additional information.
Approved Application Methods
Postemergence Surface
Warrant Herbicide may be applied postemergence to peanut at 1.25 to
2 quarts per acre after crop emergence up through the R1 growth stage
(beginning bloom).  R1 ends as 50% of the plants in an area have a visible
peg (R2).  Apply broadcast over the top of the crop or directed to the soil
surface according to the rate table listed below.  Do not exceed 2 quarts
(1.5 lbs a.i.) per acre as a single application. Allow at least 7 days between
sequential applications.
Application of Warrant Herbicide followed by conditions that do not foster
adequate crop growth, or cause stress (cold, wet soils), waterlogged
conditions, excessive irrigation or rainfall, may result in crop injury.
Application made before weeds emerge, or after clean cultivation, is
necessary, as this product will not control emerged weeds.
DO NOT exceed a total of 4 quarts (3 lbs acetochlor) per acre per season when
making multiple applications.
Do not exceed a total of 3 applications per season.
Allow a minimum of 90 days between last application and grazing or feeding
of peanut hay to livestock.
Application Rates (minimum and maximum range)
SOIL TEXTURAL
GROUP
BROADCAST RATE PER ACRE*
Less than 1.5%
Organic Matter (quarts)
1.5% or More
Organic Matter (quarts)
Coarse 1.25 to 1.6 1.25 to 1.7
Medium 1.25 to 1.7 1.25 to 1.9
Fine 1.25 to 1.9 1.25 to 2.0
*Use the higher rate in the range for areas of heavy weed infestation.
15.4 Warrant Herbicide Tank-Mixtures for
 Postemergence Use in Peanut
It is the applicator’s responsibility to ensure that all products used in a
tank mixture with this product are registered for the specific postemergence
application timing in peanut. Read and follow all applicable restrictions and
limitations and directions for use involving tank mixing on all product labels
included in the tank mixture, including any applicable crop injury precautions.
The end-user must follow the most restrictive directions for use and
precautionary statements on the labeling of each product in the tank mixture.
This product may be applied postemergence to peanut in a tank-
mixture with one or more of the active ingredients listed below:
2,4-DB, aciflurofen, bentazon, imazapic, lactofen, paraquat]
Application of Warrant Herbicide in a tank mixture with other products
or to soils where other applications of soil applied herbicides have
been made, may increase the potential for injury with this product.
16.0 Forage or Grain Sorghum (Milo)
16.1 Warrant Herbicide Preplant Incorporated,
 Preemergence, or Postemergence in Sorghum
This product, when applied preplant incorporated, preemergence, or
postemergence in sorghum, as one or two applications, will provide
preemergence control or reduced competition of the annual grasses and
broadleaf weeds listed in the “WEEDS CONTROLLED” section of the label.
7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

9
If weeds are emerged at time of application, apply a labeled postemergence
herbicide with this product to control the emerged weeds. Observe
the directions for use, precautions and restrictions on the label of the
postemergence herbicide.
Preplant Incorporated and preemergence applications of this product must be
made ONLY to sorghum planted with seed that has been properly treated with
seed protectant or safener.  Application rates from the table below should be
based on the soil texture and the tolerance of the sorghum hybrid.
NOTE: In Texas, use only in the Panhandle area and the fine-textured soils of
the Gulf Coast and the Blacklands.  In the Texas Panhandle and Oklahoma
Panhandle, do not apply preplant incorporated.
Approved Application Systems
Ground: Broadcast boom
Aerial:     Fixed-wing and helicopter. Allowed in selected states only - see
               Aerial Application Equipment section of this label for more
               information.
Approved Application Methods
Preplant Incorporated; Preemergence Surface; Postemergence Surface
Apply this product preplant incorporated, preemergence, or postemergence
to sorghum before the crop exceeds 11 inches in height (in general, 5 to
6 leaf sorghum). This product will not control emerged weeds, therefore,
emerged weeds must be controlled by a labeled postemergence herbicide or
cultural means.  If sorghum seed is not properly treated with seed protectant
or safener, preplant and preemergence applications of Warrant Herbicide will
severely injure the crop.
DO NOT exceed 4 quarts (3 lbs acetochlor) per acre per year when making
multiple applications.
DO NOT make postemergence surface applications using sprayable fluid
fertilizer as the carrier, because severe crop injury may occur.
DO NOT graze treated area or feed treated sorghum forage to livestock for
60 days following application of this product.
Application Rates (minimum and maximum range)
SOIL TEXTURAL
GROUP
BROADCAST RATE PER ACRE
Warrant Herbicide*
(quarts)
Less than 1.5%
organic matter
Warrant Herbicide*
(quarts)
1.5% or more
organic matter
Coarse 1.5 to 2.25 2.0 to 2.5
Medium 1.5 to 2.25 2.0 to 3.0
Fine 1.5 to 2.5 2.25 to 3.0
* Use the higher rate in the range for areas of heavy weed infestation.
16.2 Warrant Herbicide Tank-Mixtures
 for Preplant Incorporated,
 Preemergence, or Postemergence
 Use in Sorghum
It is the applicator’s responsibility to ensure that all products used in a tank
mixture with this product are registered for the specific application timing
in sorghum. Read and follow all applicable restrictions and limitations and
directions for use involving tank mixing on all product labels included in the
tank mixture, including any applicable crop injury precautions. The end-
user must follow the most restrictive directions for use and precautionary
statements on the labeling of each product in the tank mixture.
This product may be applied preplant incorporated, preemergence, or
postemergence to sorghum in a tank-mixture with one or more of the active
ingredients listed below, or one of the products listed below:
2,4-D, atrazine, bromoxynil, dicamba, pyrasulfotole,
Husky (EPA Reg. No. 264-1023).
17.0 SOYBEAN
17.1 Warrant Herbicide for Preplant,
 At-Planting, or Preemergence Use
 in Soybean
When applied preplant, at-planting, or preemergence in soybean, this product
will provide preemergence control or reduced competition of the annual
weeds listed in the “WEEDS CONTROLLED” section of this label.  If weeds are
emerged at the time of application, apply a labeled postemergence herbicide
to control emerged weeds.  Use of a residual herbicide for the control of weeds
not listed on this label is recommended.  Applications may be made in a
tank mixture with the products listed below. Observe all directions for use,
precautions, and restrictions on the labeling of the tank mixed postemergence
herbicide or residual herbicide.
Approved Application Systems
Ground: Broadcast boom
Aerial:       Fixed-wing and helicopter.  Allowed in selected states only -
                 see Aerial Application Equipment section of this label for
                 additional information.
Approved Application Methods
Preplant, At-planting or Preemergence Surface
Warrant Herbicide may be applied preplant, at-planting or preemergence to
soybean at 1.25 to 2 quarts per acre (qts/A) according to the rate table below.
The optimum rate of application is 1.5 qts/A.  Apply broadcast to the soil
surface according to the rate table listed below.  Mechanical incorporation is
not recommended. This product will not control emerged weeds.
Application of this product with other postemergence or soil applied herbicides
may increase the potential for crop injury.
Application of this product followed by conditions that do not favor adequate
crop growth or which cause stress (cold, wet soils), or under waterlogged
conditions from excessive irrigation or rainfall, may result in crop injury.
DO NOT exceed 4 quarts per acre per year when making a second application,
including a postemergence application to soybeans.
Application Rates (minimum and maximum range)
SOIL TEXTURAL
GROUP
BROADCAST RATE PER ACRE*
Less than 1.5%
Organic Matter
(quarts)
1.5% or More
Organic Matter
(quarts)
Coarse 1.25 to 1.6 1.25  to 1.7
Medium 1.25 to 1.7 1.25 to 1.9
Fine 1.25 to 1.9 1.25 to 2.0
* Use the higher rate in the range for areas of heavy weed infestation.
17.2 Warrant Herbicide Tank Mixtures
 for Preplant, At-Planting, or
 Preemergence Use in Soybean
It is the applicator’s responsibility to ensure that all products used in a
tank mixture with this product are registered for the specific pre-plant or
preemergence application timing in soybean.  Read and follow all applicable
restrictions and limitations and directions for use involving tank mixing on
all product labels included in the tank mixture, including any applicable crop
injury precautions. The end-user must follow the most restrictive directions
for use and precautionary statements on the labeling of each product in the
tank mixture.
This product may be applied preplant, at-planting, or preemergence in
soybean in a tank-mixture with one or more of the active ingredients listed
below, or one of the products listed below.
chlorimuron-ethyl, cloransulam-methyl, fomesafen, glyphosate,
imazethapyr, metribuzin, paraquat, pendimethalin,
Roundup PowerMAX® (EPA Reg. No. 524-549), Roundup PowerMAX ® II
(EPA Reg. No. 524-537), Roundup PowerMAX® 3 (EPA Reg. No. 524-659),
Roundup WeatherMAX® (EPA Reg. No.524-537), RT 3® (EPA Reg. No.
524-544).
In the following states only:
Alabama, Arkansas, Delaware, Georgia, Illinois, Indiana, Kansas, Kentucky,
Louisiana, Maryland, Mississippi, Missouri, Nebraska, North Carolina, Ohio,
Oklahoma, South Carolina, Tennessee, Texas, and Virginia,
this product may be tank mixed with the following active ingredients when
applied preplant, at-planting, or preemergence in soybean, including Roundup
Ready Soybeans and Roundup Ready 2 Yield Soybeans.
Conventional Tillage Conditions:
For soybeans planted under conventional tillage conditions this product may
be tank mixed with the following products and applied preplant up to 14 days
prior to planting.
No-Till or Minimum Tillage Conditions:
In soybeans planted under no-till or minimum tillage conditions on wheat
stubble or non-till field corn stubble this product may be tank mixed with
the following products and applied preplant, at-planting, or preemergence:
Flumioxazin.
Applications of this product in the tank mixtures allowed above followed by
cool wet weather conditions may result in crop injury
17.3 Warrant Herbicide for
 Postemergence Use in Soybean
This product, when applied postemergence in soybeans, as one or two
applications, will provide preemergence control or reduced competition of the
annual grasses and broadleaf weeds listed in the “WEEDS CONTROLLED”
section of this label. If weeds are emerged at time of application, apply a
labeled postemergence herbicide with this product to control the emerged
weeds.  See section of this label for recommended tank mix products for
postemergence applications in soybeans. Observe the directions for use,
precautions and restrictions on the label of the postemergence herbicide.
Approved Application Systems
Ground: Broadcast boom
Aerial:       Fixed-wing and helicopter.  Allowed in selected states only -
                 see Aerial Application Equipment section of this label for
                 additional information.
Approved Application Methods
Postemergence Surface
Apply this product postemergence to soybeans and prior to weed emergence.
The application should be made after soybeans are completely emerged but
before soybeans reach growth stage R2. Apply this product when crop is small
or direct spray to the soil surface to minimize interference of spray by crop.
The optimum timing and rate of application is when soybeans are V2-V3 at
1.5 qts/A.  Directed applications may be used to increase soil coverage and
canopy penetration after soybean growth stage V5.  Use rates are defined in
the table below.  Use the higher rate where heavy weed infestations exist.
Weeds emerged at the time of application are not controlled by this product.
If weeds are emerged at application, apply a labeled postemergence herbicide
with this product to control the emerged weeds or shallowly cultivate or rotary
hoe to improve performance.  See section of this label for recommended tank
mix products for postemergence applications in soybeans.
Apply Warrant Herbicide broadcast over-the-top or directed to the soil
surface, according to the rate table listed below.  Application made before
weeds emerge or after clean cultivation is necessary as this product will not
control emerged weeds.
7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

10
DO NOT exceed 4 quarts (3 lbs. acetochlor) per acre per year when making
a second application.
DO NOT make postemergence surface applications using sprayable fluid
fertilizer as the carrier because severe crop injury may occur.
DO NOT graze treated area or feed treated soybean forage to livestock
following application of this product.
Application Rates (minimum and maximum range)
SOIL TEXTURAL
GROUP
BROADCAST RATE PER ACRE*
Less than 1.5%
Organic Matter
(quarts)
1.5% or More
Organic Matter
(quarts)
Coarse 1.25 to 1.6 1.25 to 1.7
Medium 1.25 to 1.7 1.25 to 1.9
Fine 1.25 to 1.9 1.25 to 2.0
* Use the higher rate in the range for areas of heavy weed infestation.
17.4 Warrant Herbicide Tank-Mixtures for
 Applications Postemergence to Soybean
It is the applicator’s responsibility to ensure that all products used in a
tank mixture with this product are registered for the specific postemergence
(in-crop) application timing in soybean.  Read and follow all applicable
restrictions and limitations and directions for use involving tank mixing on
all product labels included in the tank mixture, including any applicable crop
injury precautions. The end-user must follow the most restrictive directions
for use and precautionary statements on the labeling of each product in the
tank mixture.
This product may be applied in a tank-mixture with the following products
postemergence to soybean.
acifluorfen, bentazon, chlorimuron ethyl, clethodim, cloransulam-methyl,
fenoxaprop-P-ethyl, fluazifop-P-butyl, fomesafen, imazamox, imazethapyr,
lactofen, quizalofop-P-ethyl
This product may be applied postemergence to soybean in a tank-mixture
with the active ingredient listed below, or one of the products listed below,
when used on Roundup Ready Soybean, Roundup Ready 2 Yield Soybean, and
Roundup Ready 2 Xtend® Soybean.
glyphosate, Roundup PowerMAX ® (EPA Reg. No. 524-549), Roundup
PowerMAX® II (EPA Reg. No. 524-537), Roundup PowerMAX® 3 (EPA Reg.
No. 524-659), Roundup WeatherMAX® (EPA Reg. No.524-537).
18.0 SUGAR BEET
18.1 Warrant Herbicide for Postemergence Use
 in Sugar Beet
This product, when applied postemergence in sugar beet, will provide
preemergence control or reduced competition of the annual weeds listed in
the “WEEDS CONTROLLED” section of this label.  If weeds are emerged at the
time of application, apply a labeled postemergence herbicide with this product
to control the emerged weeds. Observe the directions for use, precautions,
and restrictions on the label of the postemergence herbicide.
Approved Application Systems
Ground: Broadcast boom
Aerial:       Fixed-wing and helicopter.  Allowed in selected states only -
                 see Aerial Application Equipment section of this label for
                 additional information.
Approved Application Methods
Postemergence Surface
Warrant Herbicide may be applied postemergence to sugar beet at 1.25 to
2 quarts per acre from the 2 leaf up to the 8-leaf stage, with the 4-leaf stage
being the ideal timing.  Apply broadcast over the top of the crop or directed
to the soil surface according to the rate table listed below.  Do not exceed
2 quarts (1.5 lbs a.i.) per acre as a single application. Allow at least 7 days
between sequential applications.
Application of this product followed by conditions that do not foster adequate
crop growth, or cause stress (cold, wet soils), waterlogged conditions,
excessive irrigation or rainfall, may result in crop injury.
Application of this product followed by conditions that result in loss of sugar
beet stand may result in significant crop injury when a subsequent sugar
beet crop is replanted into the treated area.  User should take care to ensure
that crop stand is at a desirable level before using Warrant Herbicide.  If this
product has been applied and the crop fails because of adverse weather or
any other reason, immediate replanting of sugar beet is not recommended.  A
crop that is approved for preemergence application on the Warrant Herbicide
label may be replanted if the sugar beet stand is lost.
Application of this product made before weeds emerge or after clean
cultivation, or application in a labeled tank-mix with an effective
postemergence herbicide, is necessary, as Warrant Herbicide will not control
emerged weeds.
DO NOT exceed a total of 4 quarts (3 lbs. acetochlor) per acre per season
when making multiple applications.
Do not exceed a total of 3 applications per season in sugar beet.
Allow a minimum of 70 days between last application and harvest of sugar
beet and grazing or feeding of sugar beet tops to livestock.
Application Rates (minimum and maximum range)
SOIL TEXTURAL
GROUP
BROADCAST RATE PER ACRE*
Less than 1.5%
Organic Matter (quarts)
1.5% or More
Organic Matter (quarts)
Coarse 1.25 to 1.6 1.25 to 1.7
Medium 1.25 to 1.7 1.25 to 1.9
Fine 1.25 to 1.9 1.25 to 2.0
* Use the higher rate in the range for areas of heavy weed infestation.
18.2 Warrant Herbicide Tank-Mixtures for
 Postemergence Use in Sugar Beet
It is the applicator’s responsibility to ensure that all products used in a
tank mixture with this product are registered for the specific postemergence
application timing in sugar beet.  Read and follow all applicable restrictions
and limitations and directions for use involving tank mixing on all product
labels included in the tank mixture, including any applicable crop injury
precautions. The end-user must follow the most restrictive directions for use
and precautionary statements on the labeling of each product in the tank
mixture.
This product may be applied in a tank-mixture postemergence to sugar beet
(all types) with one or more of the active ingredients listed below, or the
product listed below:
clethodim, clopyralid, ethofumesate, triflusulfuron methyl,
Nortron® SC (EPA Reg. No. 264-613).
This product may be applied postemergence to sugar beet in a tank-mixture
with the active ingredient listed below, or one of the products listed below,
when used on Roundup Ready® Sugar beet.
glyphosate, Roundup PowerMAX ® (EPA Reg. No. 524-549), Roundup
PowerMAX® II (EPA Reg. No. 524-537), Roundup PowerMAX® 3 (EPA Reg.
No. 524-659), Roundup WeatherMAX® (EPA Reg. No.524-537).
Application of this product in tank mixtures with other products, including with
adjuvants, or to soils where other applications of soil applied herbicides have
been made, may increase the potential for crop injury.
19.0 LIMIT OF WARRANTY AND LIABILITY
This Company warrants that this product conforms to the chemical
description on the label and is reasonably fit for the purposes set forth in
the Complete Directions for Use label booklet (“Directions”) when used in
accordance with those Directions under the conditions described therein.
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, NO OTHER EXPRESS
WARRANTY OR IMPLIED WARRANTY OF FITNESS FOR PARTICULAR PURPOSE
OR MERCHANTABILITY IS MADE. This warranty is also subject to the
conditions and limitations stated herein.
To the extent consistent with applicable law, buyer and all users shall promptly
notify this Company of any claims whether based in contract, negligence,
strict liability, other tort or otherwise.
Buyer and all users are responsible for all loss or damage from use or handling
which results from conditions beyond the control of this Company to the extent
consistent with applicable law, including, but not limited to, incompatibility
with products other than those set forth in the Directions, unusual weather,
weather conditions which are outside the range considered normal at the
application site and for the time period when the product is applied, as well
as weather conditions which are outside the application ranges set forth in the
Directions, application in any manner not explicitly set forth in the Directions,
moisture conditions outside the moisture range specified in the Directions, or
the presence of products other than those set forth in the Directions in or on
the soil, crop or treated vegetation.
This Company does not warrant any product reformulated or repackaged
from this product except in accordance with this Company’s stewardship
requirements and with express written permission from this Company.
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY
OF THE USER OR BUYER, AND THE LIMIT OF THE LIABILITY OF THIS COMPANY
OR ANY OTHER SELLER FOR ANY AND ALL LOSSES, INJURIES OR DAMAGES
RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT (INCLUDING
CLAIMS BASED IN CONTRACT, NEGLIGENCE, STRICT LIABILITY , OTHER TORT
OR OTHERWISE) SHALL BE THE PURCHASE PRICE PAID BY THE USER OR
BUYER FOR THE QUANTITY OF THIS PRODUCT INVOLVED, OR, AT THE
ELECTION OF THIS COMPANY OR ANY OTHER SELLER, THE REPLACEMENT
OF SUCH QUANTITY , OR, IF NOT ACQUIRED BY PURCHASE, REPLACEMENT
OF SUCH QUANTITY . TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, IN
NO EVENT SHALL THIS COMPANY OR ANY OTHER SELLER BE LIABLE FOR ANY
INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES.
Buyer and all users are deemed to have accepted the terms of this LIMIT OF
WARRANTY AND LIABILITY which may not be varied by any verbal or written
agreement.
Warrant, Roundup, and Roundup Ready are trademarks of Bayer Group.  All
other trademarks are the property of their respective owners.
EPA Reg. No. 524-591
In case of an emergency involving this product,
Call Collect, day or night, 1-800-334-7577.
Packed For:
Bayer CropScience LP
800 N. Lindbergh Blvd.
St. Louis, Missouri  63167
©2021 Bayer Group. All rights reserved.

7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

11
7.125”
6.875”
6.495”
COPY AREA
COPY AREA
6.625”

200618Cv2
2D
CODE
NET 2.5 GAL
Warrant Herbicide is an encapsulated herbicide for weed control in Alfalfa, Field Corn, Popcorn,
Production Seed Corn, Silage Corn, Cotton, Peanut, Forage or Grain Sorghum (Milo), Soybean,
and Sugar Beet.
ACTIVE INGREDIENT:
   *Acetochlor .....................................................................................................................   33.0%
OTHER INGREDIENTS ........................................................................................................   67.0%
                     100.0%
   *Contains 359 grams/liter or 3.0 pounds/gallon of 2-chloro-
     N-ethoxymethyl-N-(2-ethyl-6-methylphenyl) acetamide.
EPA Reg. No. 524-591                                                                 EPA Est. No. 524-IA-1
Keep out of reach of children.
CAUTION!
See label booklet for COMPLETE DIRECTIONS FOR USE
SHAKE WELL BEFORE USING
FIRST AID: Call a poison control center or doctor for treatment advice.
IF ON
SKIN OR
CLOTHING
• Take off contaminated clothing.
• Rinse skin immediately with plenty of water for 15-20 minutes.
• Sensitized persons should avoid further contact and reuse of contaminated
clothing.
 IF INHALED • Move person to fresh air.
• If person is not breathing, call 911 or an ambulance, then give artificial respiration,
preferably by mouth-to-mouth, if possible.
• Have the product container or label with you when calling a poison control center or doctor, or
going for treatment.
• You may also contact 1-800-334-7577, collect day or night, for emergency medical treatment
information.
• This product is identified as Warrant Herbicide, EPA Registration No. 524-591.
PRECAUTIONARY STATEMENTS
Hazards to Humans and Domestic Animals. HARMFUL IF ABSORBED THROUGH THE SKIN OR
INHALED. MAY CAUSE ALLERGIC SKIN REACTION. Prolonged or frequently repeated skin contact
may cause allergic reactions in some individuals.  Avoid breathing vapor or spray mist. Remove
contaminated clothing and wash before reuse. Avoid contact with skin or clothing. Wash thoroughly
with soap and water after handling.
ACETOCHLOR GROUP HERBICIDE
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in any manner inconsistent with its labeling.
Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk Counties of New York State.
STORAGE AND DISPOSAL
Proper pesticide storage and disposal are essential to protect against exposure to people and the
environment due to leaks and spills, excess product or waste, and vandalism.  Do not allow this
product to contaminate water, foodstuffs, feed or seed by storage or disposal. PESTICIDE STORAGE:
Store pesticides away from food, pet food, feed, seed, fertilizers, and veterinary supplies. Keep
container closed to prevent spills and contamination. PESTICIDE DISPOSAL:  To avoid wastes,
use all material in this container, including rinsate, by application according to label directions.
If wastes cannot be avoided, offer remaining product to a waste disposal facility or pesticide
disposal program. Such programs are often run by state or local governments or by industry.  All
disposal must be in accordance with applicable federal, state and local regulations and procedures.
CONTAINER HANDLING AND DISPOSAL:  Non-refillable, Rigid Plastic 2.5-gallon Containers
of greater than 1-gallon but equal to or less than 5-gallon capacity:  Non-refillable container.
Do not reuse this container to hold materials other than pesticides or dilute pesticides (rinsate).
After emptying and cleaning, it may be allowable to temporarily hold rinsate or other pesticide-
related materials in the container. Contact your state regulatory agency to determine allowable
practices in your state. Triple rinse or pressure rinse (or equivalent) this container promptly after
emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix
tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4-full with water
and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store
rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this
procedure two more times. Pressure rinse as follows: Empty the remaining contents into application
equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold
container upside down over application equipment or mix tank or collect rinsate for later use
or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 PSI
for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. Once properly rinsed,
some agricultural plastic pesticide containers can be taken to a container collection site or picked
up for recycling. To find the nearest site, contact your chemical dealer or Bayer CropScience LP at
1-866-99BAYER (1-866-992-2937). If recycling is not available, dispose of in accordance with
federal, state, and local regulations and procedures, which may include puncturing the properly rinsed
container and disposing in a sanitary landfill.
Warrant, Roundup, and Roundup Ready are trademarks of Bayer Group. All other trademarks are the
property of their respective owners. ©2021 Bayer Group. All rights reserved.
Packed For:
Bayer CropScience LP
800 N. Lindbergh Blvd.
St. Louis, Missouri  63167
WARRANT® Herbicide
US62219635C     200618Cv2    08/21
FOR PRODUCT INFORMATION OR ASSISTANCE IN USING THIS PRODUCT,
CALL TOLL-FREE, 1-866-99BAYER (1-866-992-2937)
IN CASE OF AN EMERGENCY INVOLVING THIS HERBICIDE PRODUCT, OR FOR
MEDICAL ASSISTANCE, CALL COLLECT, DAY OR NIGHT, 1-800-334-7577
BASE LABEL
COPY AREA
6.75” .563”.687”
8.00”
6.625”
6.875”
COPY AREA
BASE LABEL
COPY AREA
6.75” .563”.687”
8.00”
6.625”
6.875”
COPY AREA