# FUSILADE DX HERBICIDE

- EPA Reg No: **100-1070**
- Registrant: SYNGENTA CROP PROTECTION, LLC
- Signal word: Caution
- Active ingredients: Fluazifop-P-butyl (24.5%)
- Label accepted: 2025-09-17
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000100-01070-20250917.pdf

---
September 17, 2025
Odette Alexander-Watkins
odette.alexander@syngenta.com
SYNGENTA CROP PROTECTION, LLC
Subject: Non-PRIA (Pesticide Registration Improvement Act) Labeling Amendment - Fast Track
Amendment to add clarify application methods to the Directions for Use
Product Name: FUSILADE DX HERBICIDE
Admin Number: 100-1070
EPA Receipt Date: 08/22/2025
Action Case Number: 00666286
Dear Odette Alexander-Watkins:
The amended labeling referred to above, submitted in connection with registration under the Federal
Insecticide, Fungicide, and Rodenticide Act, as amended, is acceptable.
This approval does not affect any terms or conditions that were previously imposed on this registration. You
continue to be subject to existing terms or conditions on your registration and any deadlines connected with
them.
A stamped copy of your labeling is enclosed for your records. This labeling supersedes all previously
accepted labeling. You must submit one (1) copy of the final printed labeling before you release this product
for shipment with the new labeling. In accordance with 40 CFR § 152.130(c), you may distribute or sell this
product under the previously approved labeling for 18 months from the date of this letter. After 18 months, you
may only distribute or sell this product if it bears this new revised labeling or subsequently approved labeling.
“To distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR § 152.3.
Should you wish to add/retain a reference to your company’s website on your label, then please be aware that
the website becomes labeling under FIFRA and is subject to review by EPA. If the website is false or
misleading, the product will be considered to be misbranded and sale or distribution of the product is unlawful
under FIFRA section 12(a)(1)(E). 40 CFR § 156.10(a)(5) lists examples of statements the EPA may consider
false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims
made on the website may not substantially differ from those claims approved through the registration process.
Therefore, should the EPA find or if it is brought to our attention that a website contains statements or claims
substantially differing from statements or claims made in connection with obtaining a FIFRA section 3
registration, the website will be referred to the EPA’s Office of Enforcement and Compliance Assurance.
Your release for shipment of this product constitutes acceptance of these terms. If these terms are not
complied with, this registration will be subject to cancellation in accordance with FIFRA section 6.

If you have questions, please contact Olivia Anderson by telephone at (202) 564-2255 or via email at
anderson.olivia@epa.gov.
Sincerely,
Kable Bo Davis, Senior Advisor 
FHB, RD
Office of Pesticide Programs
Kable Bo Davis

Sale, use, and distribution of this product in Nassau and Suffolk Counties in the State 
of New York is prohibited. 
 
 
 
 
Fusilade® DX Herbicide 
 
Postemergence herbicide for control of perennial and annual grass weeds 
 
Active Ingredient: 
Fluazifop-p-butyl* ...................................................................................................... 24.5% 
Other Ingredients**: 75.5% 
Total: 100.0% 
 
 *CAS No. 79241-46-6 
**Contains petroleum distillates 
 
Fusilade DX Herbicide is formulated as an emulsifiable concentrate (EC) containing 2 lb of 
fluazifop-p-butyl per gallon. 
 
KEEP OUT OF REACH OF CHILDREN. 
 
CAUTION/PRECAUCIÓN 
 
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. 
(If you do not understand the label, find someone to explain it to you in detail.) 
See additional precautionary statements and directions for use [inside booklet][on label]. 
 
EPA Reg. No. 100-1070 
EPA Est. 
 
__________ 
Net Contents 
 
[Batch Code: ____ (For nonrefillables only.)] 
 
FLUAZIFOP-P-BUTYL GROUP 1A HERBICIDE 
09/17/2025
100-1070

2 
 
TABLE OF CONTENTS 
 
1.0 FIRST AID 
PRECAUTIONARY STATEMENTS 
2.0 PRECAUTIONARY STATEMENTS 
2.1 Hazards to Humans and Domestic Animals 
2.2 Personal Protective Equipment (PPE) 
2.3 User Safety Requirements 
2.4 Engineering Controls 
2.5 User Safety Recommendations 
2.6 Environmental Hazards 
2.6.1 Groundwater Advisory 
2.6.2 Surface Water Advisory 
2.6.3 Non-Target Organism Advisory 
2.7 Physical or Chemical Hazards 
DIRECTIONS FOR USE 
3.0 PRODUCT INFORMATION 
3.1 Resistance Management 
3.1.1 Principles of Herbicide Resistant Weed Management 
4.0 APPLICATION DIRECTIONS 
4.1 Methods of Application 
4.1.1 Band Application 
4.1.2 Spot Application 
4.2 Application Equipment 
4.3 Application Volume and Spray Coverage 
4.4 Mixing Directions 
4.4.1 Fusilade DX Herbicide Alone 
4.4.2 Tank-Mix Precautions 
4.4.3 Tank-Mix Compatibility 
4.4.4 Fusilade DX Herbicide In Tank Mixtures 
4.4.5 Spray Additives 
4.5 Application through Irrigation Systems (Chemigation) 
4.5.1 Sprinkler Irrigation Application 
4.5.2 Use Precautions - Sprinkler Irrigation Application 
4.5.3 Use Restrictions – Sprinkler Irrigation Application 
4.6 Sprayer Cleanout 
5.0 RESTRICTIONS AND PRECAUTIONS 
5.1 Use Restrictions 
5.2 Use Precautions 
5.3 Mandatory Spray Drift Management

3 
 
5.4 Spray Drift Advisories 
6.0 REGIONAL USE MAP 
7.0 WEEDS CONTROLLED BY FUSILADE DX HERBICIDE 
7.1 Annual Weeds in Region A 
7.2 Perennial Weeds in Region A 
7.3 Annual Weeds in Region B (for all uses except coffee) 
7.4 Perennial Weeds in Region B (for all uses except coffee) 
8.0 CROP USE DIRECTIONS 
8.1 Asparagus 
8.2 Bananas and Plantains 
8.3 Blueberry, Lowbush; Lingonberry; and Currant, Native 
8.4 Bushberry Subgroup 13-07B excluding Blueberry, Lowbush; Lingonberry; and Currant, 
Native 
8.5 Brassica Head and Stem Vegetable, Group 5-16 
8.6 Brassica Leafy Greens, Subgroup 04-16B 
8.7 Caneberry, Subgroup 13-07A 
8.8 Carrots 
8.9 Leaf Petiole Vegetable, Subgroup 22B 
8.10 Citrus, Group 10-10 
8.11 Coffee (Only for use in Hawaii) 
8.12 Cotton 
8.12.1 Fusilade DX Herbicide Solo 
8.12.2 Tank Mix and Sequential Applications for Cotton 
8.13 Dry Beans 
8.14 Fine Fescue Grasses Grown for Seed (Only for Use in Idaho, Oregon, and Washington) 
8.15 Lettuce, Leaf and Head 
8.16 Low Growing Berry, Subgroup 13-07G 
8.17 Macadamia Nuts 
8.18 Onion, Bulb, Subgroup 3-07A 
8.19 Onion, Green, Subgroup 3-07B 
8.20 Papaya 
8.21 Peanuts 
8.22 Pecans 
8.23 Small Fruit Climbing Subgroup, 13-07F (except fuzzy kiwifruit) 
8.24 Soybeans 
8.24.1 Fusilade DX Herbicide Solo 
8.24.2 Tank Mix and Sequential Applications for Soybeans – Region A 
8.24.3 Tank Mix and Sequential Applications for Soybeans – Region B 
8.25 Stone Fruit, Group 12-12 
8.26 Sugar Beets 
8.27 Tabasco Peppers (Only for Use in Louisiana) 
8.28 Tuberous and Corm Vegetables, Subgroup 1D (except potato) 
8.29 Non-bearing Crops

4 
 
8.30 Nonfood Uses: Fallow Agricultural Land and Other Noncrop Areas of Farms 
9.0 STORAGE AND DISPOSAL 
10.0 CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY 
11.0 APPENDIX 
11.1 Tank Mix Partner Table 
11.2 Rate Conversion Chart 
11.3 SCIENTIFIC NAMES OF WEED SPECIES

5 
 
 
1.0 FIRST AID 
FIRST AID 
If on skin or 
clothing 
• Take off contaminated clothing. 
• Rinse skin immediately with plent y of water for 15-20 minutes. 
• Call a poison control center or doctor for treatment advice. 
If inhaled • Move person to fresh air. 
• If person is not breathing call 911 or an ambulance, then give 
artificial respiration, preferably mouth-to-mouth if possible. 
• Call a poison control center or doctor for further treatment 
advice. 
If in eyes • Hold eye open and rinse slowly and gently with water for 15-20 
minutes. 
• Remove contact lenses, if pres ent, after the first 5 minutes, then 
continue rinsing eye. 
• Call a poison control center or doctor for treatment advice. 
If swallowed • Immediately call a poison control center or doctor. 
• DO NOT induce vomiting unless told to do so by a poison 
control center or doctor. 
• DO NOT give any liquid to the person. 
• DO NOT give anything by mouth to an unconscious person. 
NOTE TO PHYSICIAN 
Contains petroleum distillate – vomiting may cause aspiration pneumonia. 
Have the product container or label with you when calling a poison control center or doctor, or 
going for treatment. You may also contact 1-800-888-8372 for emergency medical treatment 
information. 
SYNGENTA HOTLINE NUMBER 
For 24-Hour Medical Emergency Assistance (Human or Animal) or Chemical Emergency 
Assistance (Spill, Leak, Fire, or Accident) 
Call 
1-800-888-8372 
 
PRECAUTIONARY STATEMENTS 
 
2.0 PRECAUTIONARY STATEMENTS 
2.1 Hazards to Humans and Domestic Animals 
CAUTION/PRECAUCIÓN 
Harmful if absorbed through skin. Harmful if inhaled. Causes moderate eye irritation. Avoid contact 
with skin, eyes or clothing. Avoid breathing spray mist. Prolonged or frequently repeated skin contact

6 
 
may cause allergic reactions in some individuals. Wash thoroughly with soap and water after handling 
and before eating, drinking, chewing gum, using tobacco, or using the toilet. 
 
2.2 Personal Protective Equipment (PPE) 
All mixers, loaders, applicators, and other handlers must wear: 
• Long-sleeved shirt and long pants 
• Chemical-resistant gloves made of barrier laminate, nitrile rubber ≥ 14 mils, neoprene 
rubber ≥ 14 mils, or VitonTM ≥ 14 mils 
• Shoes plus socks 
Mixers and Loaders for Aerial Applicators 
• For mixing and loading for applying by airc raft, coverall must be worn over long-
sleeved shirt and long pants, socks, chemical resistant footwear, and waterproof or 
chemical resistant gloves made of barrier laminate, nitrile rubber ≥ 14 mils, neoprene 
rubber ≥ 14 mils, or VitonTM ≥ 14 mils 
Mixers and Loaders for Mechanically Pressurized Handgun Spot Treatment 
• In addition to the above requirements thes e users treating Bushberry Subgroup 13-07B; 
and Caneberry Subgroup 13-07A must wear a minimum of a NIOSH approved filtering 
face piece respirator with any N filter (TC-84A). You can also use other NIOSH approved 
particulate respirators that offer more protection. 
 
2.3 User Safety Requirements 
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for 
washables exist, use detergent and hot water. Keep and wash PPE separately from other 
laundry. 
2.4 Engineering Controls 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the 
requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides (40 
CFR 170.240(d)(4-6)), the handler PPE requirements may be reduced or modified as 
specified in the WPS. 
2.5 User Safety Recommendations 
Users should: 
• Remove clothing/PPE immediately if pes ticide gets inside. Then wash thoroughly 
and put on clean clothing. 
• Remove PPE immediately after handling th is product. Wash the outside of gloves 
before removing. As soon as possible, wash thoroughly and change into clean 
clothing.

7 
 
2.6 Environmental Hazards 
This product is toxic to fish and aquatic invertebrates. DO NOT apply to areas where runoff 
into water bodies is expected. For terrestrial uses: DO NOT apply directly to water, to areas 
where surface water is present, or to intertidal areas below the mean high-water mark. DO 
NOT contaminate water when disposing of equipment washwaters or rinsate. Drift and runoff 
may be hazardous to aquatic organisms in water adjacent to treated areas. 
2.6.1 Groundwater Advisory 
Fluazifop-p-butyl has properties and characteristics associated with chemicals detected in 
groundwater and is known to leach through soil into groundwater under certain conditions as 
a result of label use. This chemical may leach into groundwater if used in areas where soils 
are permeable, particularly where the water table is shallow. 
2.6.2 Surface Water Advisory 
This product may impact surface water quality due to runoff of rainwater. This is especially 
true for poorly draining soils and soils with shallow groundwater. 
This product is classified as having high potential for reaching surface water via runoff for 
several months or more after application. A level, welI-maintained vegetative buffer strip 
between areas to which this product is applied and surface water features, including ponds, 
streams, and springs will reduce the potential loading of fluazifop-p-butyl from runoff water 
and sediment. Runoff of this product will be reduced by avoiding applications when rainfall is 
forecasted to occur within 48 hours. 
2.6.3 Non-Target Organism Advisory 
This product is toxic to plants and may adversely impact the forage and habitat of non-target 
organisms, including pollinators, in areas adjacent to the treated site. Protect the forage and 
habitat of non-target organisms by following label directions intended to minimize spray drift. 
2.7 Physical or Chemical Hazards 
DO NOT use or store near heat or open flame. 
 
DIRECTIONS FOR USE 
It is a violation of federal law to use this product in a manner inconsistent with its labeling. 
This labeling must be in the possession of the user at the time of application. 
DO NOT apply this product in a way that will contact workers or other persons, either directly 
or through drift. Only protected handlers may be in the area during application. For any 
requirements specific to your State or Tribe, consult the agency responsible for pesticide 
regulation.

8 
 
FAILURE TO FOLLOW THE DIRECTIONS FOR USE AND PRECAUTIONS ON THIS 
LABEL MAY RESULT IN CROP INJURY, POOR WEED CONTROL, AND/OR ILLEGAL 
RESIDUES. 
 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection 
Standard, 40 CFR part 170. This Standard contains requirements for the protection of 
agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of 
agricultural pesticides. It contains requirements for training, decontamination, 
notification, and emergency assistance. It also contains specific instructions and 
exceptions pertaining to the statements on this label about personal protective 
equipment (PPE), and restricted-entry interval. The requirements in this box only apply 
to uses of this product that are covered by the Worker Protection Standard. 
DO NOT enter or allow worker entry into treated areas during the restricted-entry 
interval (REI) of 12 hours. 
PPE required for early entry to treated areas that is permitted under the Worker 
Protection Standard and that involves contact with anything that has been treated, 
including plants, soil, or water, is: 
• Coveralls 
• Chemical-resistant gloves made of barrier laminate, nitrile rubber ≥ 14 mils, 
neoprene rubber ≥ 14 mils, or Viton ≥ 14 mils 
• Shoes plus socks 
 
 
NON-AGRICULTURAL USE REQUIREMENTS 
The requirements in this box apply to uses of this product that are NOT within the 
scope of the Worker Protection Standard for agricultural pesticides (40 CFR Part 170). 
The WPS applies when this product is used to produce agricultural plants on farms, 
forests, nurseries, or greenhouses. 
DO NOT treat areas while unprotected humans or domestic animals are present in the 
treatment areas. DO NOT allow entry into treated areas without protective clothing until 
sprays have dried. 
Written or oral warnings must be given to workers who are expected to be in a treated 
area or in an area about to be treated with this product. When oral warnings are given, 
warnings shall be given in a language customarily understood by workers. Oral 
warnings must be given if there is reason to believe that written warnings cannot be 
understood by workers. Warnings must include the following information: 
CAUTION: Area treated with Fusilade DX Herbicide on (date of application). DO NOT 
enter without appropriate protective clothing until sprays have dried. In case of 
accidental exposure to pesticide spray, wash the skin thoroughly with soap and water.

9 
 
Remove contaminated clothing and wash before reuse. If in eyes, flush with plenty of 
water. If irritation persists, get medical attention. 
 
3.0 PRODUCT INFORMATION 
Fusilade DX Herbicide is a selective postemergence herbicide for control of annual and 
perennial grass weeds in numerous crops and on fallow land, and on listed noncrop areas 
and nonbearing crops. Fusilade DX Herbicide will provide effective control of grass weeds in 
conventional tillage, minimum tillage, and no-till plantings. Fusilade DX Herbicide does not 
control broadleaf weeds or sedges (nutgrass). 
Fusilade DX Herbicide is a systemic herbicide which moves from the treated foliage into the 
shoots, roots, rhizomes, stolons, and growing points (meristematic regions) of treated grass 
weeds. 
Thorough coverage of all weed plant foliage is important for good activity. Optimum weed 
control is achieved when young actively growing weeds are treated that are not under stress 
from moisture, temperature, low soil fertility, mechanical, or chemical injury. 
Control Symptoms 
Growth of treated grass weeds stops soon after application. Symptoms include loss of vigor, 
yellowing and/or reddening, and eventual death of treated grasses. Symptoms are generally 
observed within one week after treatment, depending on grass weed species and 
environmental conditions. 
Rainfastness 
Fusilade DX Herbicide is rainfast 1 hour after application. 
 
3.1 Resistance Management 
For resistance management, please note that Fusilade DX Herbicide is a Group 1 herbicide. 
Any weed population may contain plants naturally resistant to Group 1 herbicides. The 
resistant individuals may dominate the weed population if these herbicides are used 
repeatedly in the same fields. Appropriate resistance-management strategies should be 
followed. 
To delay herbicide resistance, take one or more of the following steps: 
3.1.1 Principles of Herbicide Resistant Weed Management 
Scout and know your field 
• Know weed species present in the fi eld to be treated through scouting and field 
history. An understanding of weed biology is useful in designing a resistance

10 
 
management strategy. Ensure the weed management program will control all weeds 
present. 
• Fields should be scouted prior to application to determine species present and growth 
stage. Always apply this herbicide at the full labeled rate and correct timing for the 
weeds present in the field. 
Utilize non-herbicidal practices to add diversity 
• Use diversified management tactics such as cover crops, mechanical weed control, 
harvest weed seed control, and crop rotation as appropriate. 
Use good agronomic practices, start clean and stay clean 
• Use good agronomic practices t hat enhance crop competitiveness. 
• Plant into weed-free fields utilizing tillage or an effective burndown herbicide for control 
of emerged weeds. 
• Sanitize farm equipment to avoid spreading seed or vegetative propagules prior to 
leaving fields. 
Difficult to control weeds 
• Fields with difficult to control weeds shoul d be planted in rotation with crops that allow 
the use of herbicides with an alternative mode of action or different management 
practices. 
• Difficult to control weeds may require sequential applications, such as a broad 
spectrum preemergence herbicide followed by one or more postemergence herbicide 
applications. Utilize herbicides containing different modes of action effective on the 
target weeds in sequential applications. 
DO NOT overuse the technology 
• DO NOT use more than two applications of this or any other herbicide with the same 
mode of action in a single growing season unless mixed with an herbicide with a 
different mode of action which provides overlapping spectrum for the difficult to control 
weeds. 
Scout and inspect fields following application 
• Prevent an influx of weeds into the fi eld by controlling weeds in field borders. 
• Scout fields after application to veri fy that the treatment was effective. 
• Suspected- herbicide resistant weeds may be identified by these indicators 
• Failure to control a weed species norma lly controlled by the herbicide at the 
dose applied, especially if control is achieved on adjacent weeds; 
• A spreading patch of non-controlled plan ts of a particular weed species; and

11 
 
• Surviving plants mixed with controlled individuals of the same species. 
• Report non-performance of this produc t to your Syngenta retailer, Syngenta 
representative, or call 1-866-Syngent(a) (866-796-4368). If resistance is suspected 
ensure weed escapes are controlled using an herbicide with an effective mode of 
action and/or use non-chemical means to prevent further seed production. 
Prevent weed escapes before, during, and after harvest 
• DO NOT allow weed escapes to produce seed or vegetative structures such as tubers 
or stolons which contribute to spread and survival. Consider harvest weed seed 
management and control weeds post-harvest to prevent seed production. 
Resistant Weeds 
• Contact your local Syngenta representative, retailer, crop advisor or extension agent to 
determine if weeds resistant to modes of action contained in this product are present in 
your area. DO NOT assume that each listed weed is being controlled by multiple modes 
of action. Premixes are intended to broaden the spectrum of weeds that are controlled. 
Some weeds may be controlled by only one of the active ingredients in this product. If 
resistant biotypes have been reported, use the full labeled rate of this product, apply at 
the labeled timing, and tank-mi x with an additional different mode of action product so 
there are multiple effective modes of application for each suspected resistant weed. 
 
4.0 APPLICATION DIRECTIONS 
4.1 Methods of Application 
Applications with Fusilade DX Herbicide are permitted by ground, air, and chemigation. 
4.1.1 Band Application 
Thorough weed coverage is important for control. Best coverage is obtained with a minimum 
of two nozzles, one directed to each side of the planted row. Avoid application with a single 
nozzle directed over the top of the row. Cultivation of untreated areas may be needed 
following band applications. 
When making band applications and cultivating in the same operation, position nozzles in 
advance of the cultivation device. This will reduce dust in the spray area. Dust can intercept 
the spray, reducing weed coverage, resulting in less than adequate weed control. 
Calculate the amount of herbicide and water volume needed for band treatment by the 
following formulas: 
 Band width in inches X broadcast rate = Band herbicide rate 
 Row width in inches per acre per acre 
 
 Band width in inches X broadcast volume = Band herbicide volume 
 Row width in inches per acre per acre

12 
 
 
Avoid band applications to perennial grasses as reinfestation of the treated band from the 
untreated middle may result. 
4.1.2 Spot Application 
Mix Fusilade DX Herbicide and crop oil concentrate or nonionic surfactant with water 
according to the amounts shown below. Spray to obtain thorough coverage, but DO NOT 
spray to runoff. Re-treat if necessary. 
USE RESTRICTIONS 
• For applications made by mechanically-pressur ized handgun, a minimum volume of 55 gallons 
spray solution must be used per acre. 
• For applications made by mechanically-pressurized handgun, DO NOT exceed a maximum 
concentration of 0.01 pounds of active ingredient per gallon application solution. 
• DO NOT exceed the maximum yearly application rate per the CROP SPECIFIC RESTRICTIONS 
in Section 8. 
• If Fusilade DX Herbicide is applied as a spot treatment, DO NOT exceed the maximum rate 
allowed per acre 
 
Spot Spray Mixing Directions 
To Make 
This Spray 
Volume 
Add These Amounts 
 
Fusilade DX 
Herbicide 
Crop Oil 
Concentrate OR 
Nonionic 
Surfactant 
1 gallon 0.75 fl oz 1.5 fl oz 0.5 fl oz 
10 gallons 6.5 fl oz 13 fl oz 3 fl oz 
25 gallons 1 pt 1 qt 0.5 pt 
50 gallons 1 qt 2 qt 1 pt 
 
4.2 Application Equipment 
• Spray equipment configuration should be arranged to provide accurate and uniform 
coverage of the target area and minimize potential for spray drift. 
• To ensure accuracy, calibrate sprayer before each use. 
• For information on spray equipment and ca libration, consult spray equipment 
manufacturers and/or state recommendations. 
• All ground, aerial, and chem igation application equipment must be properly maintained 
and calibrated using appropriate carriers. 
• For aerial applications, use low-drift nozzles. 
• For ground applications, use sprayers that provide accurate and uniform application. 
 
4.3 Application Volume and Spray Coverage 
Use sufficient spray volume to ensure complete coverage of target grasses.

13 
 
For ground applications, apply in 5-40 gal/A of spray mixture. When grass foliage is dense, 
use a minimum of 20 gal/A to ensure coverage of weed foliage. 
For aerial applications, apply a minimum of 5 gal/A. When grass foliage is dense, use a 
minimum of 10 gal/A to ensure coverage of weed foliage. Add 1 pt/A of crop oil concentrate 
or nonionic surfactant in the spray mixture. 
 
4.4 Mixing Directions 
4.4.1 Fusilade DX Herbicide Alone 
1. Fill the spray tank with half the r equired amount of water and begin agitation. 
2. Add Fusilade DX Herbicide. 
3. Add spray adjuvant and fertilizer (if used). 
4. Add the remaining water and maintain agitation throughout the spray operation. 
 
4.4.2 Tank-Mix Precautions 
• It is the pesticide user’s responsibility to ensure that all products are registered for 
the intended use. Read and follow the applicable restrictions and limitations and 
directions for use on all product labels involved in tank mixing. Users must follow 
the most restrictive directions for use and precautionary statements of each 
product in the tank mixture. 
• Tank mixes of Fusilade DX Herbicide with other pesticides, fertilizers, or any other 
additives not specifically labeled for use with Fusilade DX Herbicide may result in tank mix 
incompatibility or unsatisfactory performance. In such cases, always check tank mix 
compatibility by conducting a jar test according to guidance in Section 4.4.3 before actual 
tank mixing. 
 
4.4.3 Tank-Mix Compatibility 
• Conduct a jar test using a 1 pt to 1 qt cont ainer with lid by adding water or other intended 
carrier such as liquid fertilizer to the jar. 
• Next, add the appropriate amount of pesticide(s) or tank-mix partner(s) in their relative 
proportions based on specified label rates. Add tank-mix components separately in the 
order described in the tank-mixing section, Section 4.4.4. After each addition, shake or 
stir gently to thoroughly mix. 
• After all ingredients have been added, put the lid on the jar, tighten and invert the jar 10 
times to mix. 
• After mixing, let the mixture stand 15–30 minutes and then examine for signs of 
incompatibility such as obvious separation, large flakes, precipitates, gels or heavy oily 
film on the jar. 
• If the mixture remains mixed or can be remixed readily, it is physically compatible and can 
be used.

14 
 
• If the mixture is incompatible , repeat the test using a compatibility agent at the specified 
label rate. Or, if applicable, slurry dry formulations in water before adding to the jar. If 
incompatibility is still observed after following these procedures, DO NOT use the mixture. 
• After compatibility testing is complete, dispose of any pesticide wastes in accordance with 
the storage and disposal section, Section 10.0, of this label. 
 
4.4.4 Fusilade DX Herbicide In Tank Mixtures 
1. Fill the spray tank with half the requir ed amount of water and begin agitation. Add dry 
pesticide formulations. 
2. Add Fusilade DX Herbicide. 
3. Add liquid pesticide formulations. 
4. Add spray adjuvant and fertilizer (if used). 
5. Add the remaining water and maintain agitation throughout the spray operation. 
 
4.4.5 Spray Additives 
Only spray additives cleared for use on growing crops under 40 CFR 180.1001 may be used in spray 
mixture. 
 
Always add one of the following: 
 
• Crop Oil Concentrate - Add a non-phytotoxic crop oil concentrate or a once-refined vegetable oil 
concentrate containing 15-20% approved emulsifier, at 0.5-1% v/v (0.5-1 gal/100 gal) in the 
finished spray volume for ground applications. For aerial applications, add 1 pt of crop oil 
concentrate per acre. 
 
• Nonionic Surfactant - Add nonionic surfactant containing at least 75% surface-active agent, at 
0.25-0.5% v/v (1-2 qt/100 gal) in the finished spray volume for ground application. For aerial 
application, add 1 pt of surfactant per acre. 
 
• Other Adjuvants - Adjuvants other than COC or NIS may be used providing the product meets 
the following criteria: 
 
1. Contains only EPA exempt ingredients. 
2. Is nonphytotoxic to the target crop. 
3. Is compatible in mixture. (May be established through a jar test). 
4. Is supported locally for use with Fusilade DX Herbicide on the target crop through proven field 
trials and through university and extension guidance. 
 
Always refer to the product label and follow directions concerning rates, target crops, environmental 
effects, including drought or weed stress, and use in tank mix with other labeled pesticides. 
 
In addition to crop oil concentrate or nonionic surfactant, liquid nitrogen fertilizer (28% or similar) can 
be added to the spray mixture in soybeans only. This 28% liquid nitrogen fertilizer is water soluble and 
can be used at a rate of one gallon per acre. Liquid nitrogen fertilizers cannot be used as a substitute 
for crop oil concentrate or nonionic surfactant in the spray mixture.

15 
 
Diammonium phosphate (aqueous ammonium polyphosphate) commonly sold as a solution (10-34-0) 
can be added to the spray mixture. This water-soluble material can be used at a rate of 2 pt/A. 
Diammonium phosphate cannot be used as a substitute for crop oil concentrate or nonionic surfactant 
in the spray mixture. 
 
4.5 Application through Irrigation Systems (Chemigation) 
4.5.1 Sprinkler Irrigation Application 
Apply Fusilade DX Herbicide at rates and timing described elsewhere in this label. DO NOT use 
adjuvants in the manner described elsewhere in this label for use in conventional applications. As 
local directions differ, consult your local State Extension Service or other local experts for directions 
on adjuvant or diluent types, rates and mixing instructions. These directions need to be proven, 
through university, extension or local expert field trials, to be effective with Fusilade DX Herbicide 
applied by chemigation. 
 
Check the irrigation system to ensure uniform application of water to all areas. Thorough coverage of 
foliage is required for good control. Good agitation in the pesticide supply tank needs to be 
maintained prior to and during the entire application period. 
 
Apply by injecting the directed rate of Fusilade DX Herbicide into the irrigation system using a 
metering device that will introduce a constant flow and by distributing the product to the target areas in 
0.1-0.2 acre-inch of water. Use the least amount of water required for proper distribution and 
coverage. It is advised that the product be injected into the main irrigation line ahead of a right angle 
turn in the line to ensure adequate dispersion or mixing in the irrigation water. Once the application is 
completed, flush the entire irrigation and injection system with clean water before stopping the 
system. 
 
In addition to the above directions, if application is being made during a normal irrigation set of a 
stationary sprinkler, the directed rate of Fusilade DX Herbicide for the area covered needs to be 
injected into the system only during the end of the irrigation set for sufficient time to provide adequate 
coverage and product distribution. 
 
Fusilade DX Herbicide must not be applied through an irrigation system connected to a public water 
system. Public water system means a system for the provision to the public of piped water for human 
consumption if such system has at least 15 service connections or regularly serves an average of at 
least 25 individuals daily at least 60 days out of the year. 
 
4.5.2 Use Precautions - Sprinkler Irrigation Application 
• Apply this product only through sprinkler irrigation systems including center pivot, lateral move, 
end tow, side (wheel) roll, traveler, big gun, solid set, or hand move. 
• Crop injury, lack of effectiveness, or illegal pesticide residues in the crop can result from non-
uniform distribution of treated water. 
• If you have any questions about calibration, contact State Extension Service Specialists, 
equipment manufacturers or other experts. 
• A person knowledgeable of the chemigation system and responsible for its operation or under the 
supervision of the responsible person, shall shut the system down and make necessary 
adjustments if the need arises.

16 
 
 
4.5.3 Use Restrictions – Sprinkler Irrigation Application 
• DO NOT apply this product through any other type of irrigation system. 
• DO NOT connect an irrigation system (including greenhouse systems) used for pesticide 
application to a public water system unless the pesticide label prescribed safety devices for public-
water systems are in place. 
• The system must contain a functional check valve, vacuum relief valve, and low pressure drain 
appropriately located on the irrigation pipeline to prevent water source contamination from back-
flow. 
• The pesticide injection pipeline must contain a functional, automatic, quick-closing check valve to 
prevent the flow of fluid back toward the injection pump. 
• The pesticide injection pipeline must also contain a functional, normally closed, solenoid-operated 
valve located on the intake side of the injection pump and connected to the system interlock to 
prevent fluid from being withdrawn from the supply tank when the irrigation system is either 
automatically or manually shut down. 
• The system must contain functional interlocking controls to automatically shut off the pesticide 
injection pump when the water pump motor stops. 
• The irrigation line or water pump must include a functional pressure switch which will stop the 
water pump motor when pressure decreases to the point where pesticide distribution is adversely 
affected. 
• Systems must use a metering pump, including a positive displacement injection pump (e.g. 
diaphragm pump) effectively designed and constructed of materials that are compatible with 
pesticides and are capable of being fitted with a system interlock. 
• Any alternatives to the above required safety devices must conform to the list of EPA approved 
alternative devices. 
• DO NOT apply when wind speed favors drift beyond the area intended for treatment or non-
uniform distribution of treated water. 
 
4.6 Sprayer Cleanout 
Thoroughly clean sprayer or other application device before using. Dispose of cleaning 
solution in a responsible manner. DO NOT use a sprayer or applicator contaminated with any 
other materials, or crop damage or clogging of the application device may result. 
 
5.0 RESTRICTIONS AND PRECAUTIONS 
5.1 Use Restrictions

17 
 
• DO NOT apply to grasses which are stressed due to moisture, temperature, low soil fertility, 
mechanical or chemical injury. 
• DO NOT apply to grasses which have tillered, formed seed heads, or exceeded listed growth 
stages. 
• DO NOT apply Fusilade DX Herbicide if rainfall is expected within 1 hour. 
• DO NOT plant corn within 6 months after the last application of Fusilade DX Herbicide or illegal 
residues may occur. 
• DO NOT plant any other crop not listed for use on this label within 12 months after the last 
application of Fusilade DX Herbicide or illegal residues may occur. 
• Avoid drift to all other crops and non-target areas. Grass crops are highly susceptible to Fusilade 
DX Herbicide. 
• DO NOT cultivate treated grasses within 7 days prior to or within 7 days after application of 
Fusilade DX Herbicide as weeds may be put under stress reducing weed control. Timely 
cultivation 2-3 weeks after applying Fusilade DX Herbicide may assist weed control. 
• DO NOT apply more than 1.125 pounds of fluazifop-p-butyl per acre per year 
• For applications made by mechanically-pressur ized handgun, a minimum volume of 55 gallons 
spray solution must be used per acre. 
• For applications made by mechanically-pressurized handgun, DO NOT exceed a maximum 
concentration of 0.01 pounds of active ingredient per gallon application solution. 
 
5.2 Use Precautions 
• Apply to actively growing grasses. 
• Apply at the directed rate to grasses at the listed growth stages as outlined. 
• Apply when the first grass weed species in a mixed grass weed population reaches the 
specified growth stage for treatment. Use the highest directed rate for grasses in that 
population. 
• Retreatment at the directed rate may be needed to control later germinating grasses or if 
regrowth occurs. 
• Where irrigation is used as part of norma l cropping practice, best results are usually 
obtained when Fusilade DX Herbicide is applied within 7 days after irrigation. 
• Best perennial grass control can be obtained if rhizomes or stolons are cut up by preplant 
tillage practices (discing, plowing, etc.) to stimulate maximum emergence of grass shoots. 
• Sequential applications with herbicides, except as specified on this label or on 
supplemental labeling, within five days before or after Fusilade DX Herbicide application 
may result in unsatisfactory crop injury and/or grass control. 
 
5.3 Mandatory Spray Drift Management 
Aerial Applications: 
• DO NOT release spray at a height greater than 10 ft above the ground or vegetative 
canopy, unless a greater application height is necessary for pilot safety. 
• Applicators are required to select the nozzle and pressure that deliver medium or coarser 
droplets (ASABE S572.1). 
• If the wind speed is 10 m iles per hour or less, applicators must use ½ swath 
displacement upwind at the downwind edge of the field. When the wind speed is 
between 11-15 miles per hour, applicators must use ¾ swath displacement upwind at 
the downwind edge of the field.

18 
 
• DO NOT apply when wind speeds exceed 15 mph at the application site. If the wind 
speed is greater than 10 mph, the boom length must be 65% or less of the wingspan for 
fixed wing aircraft and 75% or less of the rotor diameter for helicopters. Otherwise, the 
boom length must be 75% or less of the wingspan for fixed-wing aircraft and 90% or less 
of the rotor diameter for helicopters. 
• DO NOT apply during temperature inversions. 
 
Ground Boom Applications: 
• User must only apply with the release height recommended by the manufacturer, but no 
more than 4 feet above the ground or crop canopy. 
• Applicators are required to select the no zzles and pressure that deliver medium or 
coarser droplets (ASABE S572.1). 
• DO NOT apply when wind speeds exceed 15 miles per hour at the application site. 
• DO NOT apply during temperature inversions. 
 
5.4 Spray Drift Advisories 
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT. BE 
AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS. 
5.4.1 Importance of Droplet Size 
• An effective way to reduce spray dr ift is to apply large droplets. 
• Use the largest droplets that provide target pest control. 
• While applying larger droplets will reduce spray drift, the potential for drift will be greater if 
applications are made improperly or under unfavorable environmental conditions. 
5.4.2 Controlling Droplet Size - Ground Boom 
• Volume – Increasing the spray volume so that larger droplets are produced will reduce 
spray drift. Use the highest practical spray volume for the application. If a greater spray 
volume is needed, consider using a nozzle with a higher flow rate. 
• Pressure – Use the lowest spray pressure recommended for the nozzle to produce the 
target spray volume and droplet size. 
• Spray nozzle – Use a spray nozzle that is designed for the intended application. Consider 
using nozzles designed to reduce drift. 
5.4.3 Controlling Droplet Size - Aircraft 
• Adjust Nozzles – Follow nozzle manufacture rs’ recommendations for setting up nozzles. 
Generally, to reduce fine droplets, nozzles should be oriented parallel with the airflow in 
flight. 
5.4.4 Release Height – Aircraft 
• Higher release heights increase t he potential for spray drift.

19 
 
5.4.5 Boom Height – Ground Boom 
• For ground equipment, the boom should remain level with the crop and have minimal 
bounce. 
5.4.6 Boomless Ground Applications 
• Setting nozzles at the lowest effective height will help to reduce the potential for spray 
drift. 
5.4.7 Shielded Sprayers 
• Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded 
sprayers. Verify that the shields are not interfering with the uniform deposition of the spray 
on the target area. 
5.4.8 Temperature and Humidity 
• When making applications in low relative humidity, set up equipment to produce larger 
droplets to compensate for evaporation. 
5.4.9 Temperature Inversions 
• Drift potential is high during a temperature Inversion. 
• Temperature inversions are characterized by increasing temperatures with altitude and 
are common on nights with limited cloud cover and light to no wind. 
• They begin to form as the sun sets and often continue into the morning. 
• The presence of an inversion can be indica ted by ground fog or by the movement of 
smoke from a ground source or an aircraft smoke generator. 
• Smoke that layers and moves laterally in a concentrated cloud (under low wind 
conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates 
indicates good vertical air mixing. 
• Avoid applications duri ng temperature inversions. 
5.4.10 Wind 
• Drift potential generally increases with wind speed. 
• AVOID APPLICATIONS DURING GUSTY WIND CONDITIONS. 
• Applicators need to be familiar with local wind patterns and terrain that could affect spray 
drift. 
5.4.11 Handheld Technology Applications 
• Take precautions to minimize spray drift

20 
 
6.0 REGIONAL USE MAP 
 
ANNUAL AND PERENNIAL GRASS WEED CONTROL FOR COTTON, SOYBEANS, AND OTHER 
REGISTERED CROPS 
 
 
Region A - Includes the following states or portions of states where Fusilade DX Herbicide can be 
applied at directed rates. 
Alabama, Alaska, Arkansas, California (Northern; see regional map), Connecticut, Delaware, Florida, 
Georgia, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, 
Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada (Northern; 
see regional map), New Hampshire, New Jersey, New York, North Carolina, North Dakota, Ohio, 
Oklahoma (east of Interstate 35), Oregon, Pennsylvania, Puerto Rico, Rhode Island, South Carolina, 
South Dakota, Tennessee, Texas (east of Interstate 35), Utah (Northern; see regional map), Vermont, 
Virginia, Washington, West Virginia, Wisconsin, and Wyoming. 
 
Region B - Includes the following states or portions of states where Fusilade DX Herbicide can be 
applied at specified rates. 
Arizona, California (Southern; see regional map), Colorado, Hawaii, Oklahoma (west of Interstate 35), 
Nevada (Southern; see regional map), New Mexico, Utah (Southern; see regional map), and Texas 
(west of Interstate 35).

21 
 
7.0 WEEDS CONTROLLED BY FUSILADE DX HERBICIDE 
7.1 Annual Weeds in Region A 
Annual Grass Species1 Height (in) Max # of Leaves Rate (fl oz/A)5 
Barnyardgrass 2-3 3 12 
Broadleaf signalgrass 2-4 5 12 
Crabgrass, large 1-2 4 12 
Crabgrass, smooth 1-2 4 12 
Crabgrass, southern 1-2 4 12 
Crabgrass, tropical 1-2 4 12 
Downy Brome2 2-6 6 8 
Fall Panicum 2-6 4 12 
Field Sandbur 2-4 4 12 
Foxtail, giant 2-6 4 12 
Foxtail, green 2-4 4 12 
Foxtail, yellow 2-4 4 12 
Goosegrass 2-4 6 8 
Italian ryegrass 2-4 4 12 
Itchgrass 4-24 6 8 
Johnsongrass, seedling 2-8 4 6 
Junglerice 2-3 3 12 
Red rice 0.5-1 2 16 
Shattercane 6-12 8 63 
Sorghum almum 6-12 8 8 
Southern sandbur 2-6 6 12 
Texas panicum 2-8 8 12 
Volunteer barley 2-6 6 8 
Volunteer corn4 12-24 10 4-6 
Volunteer milo 6-12 4 6 
Volunteer oats 2-6 6 8 
Volunteer rye 2-6 6 8 
Volunteer wheat 2-6 6 8 
Wild proso millet 4-8 6 6 
Witchgrass 2-4 6 12 
Wild oats 2-6 6 8 
Woolly cupgrass 2-4 6 12 
Footnotes 
1Scientific names provided in Section 11.3 
2Not registered in California for use on this species 
3Use 6-8 fl oz/A when tank mixing with broadleaf herbicides in soybeans. Use the 8 fl oz/A rate 
under conditions of low soil moisture or low humidity or when weeds have reached the maximum 
specified growth stage. 
4Provides suppression of sethoxydim-resistant volunteer corn and control of Roundup Ready®, 
LibertyLink® and IMI-Corn® volunteer corn. 
5For lb ai fluazifop-p-butyl per acre, refer to Section 11.2

22 
 
Use Restrictions 
1) DO NOT exceed the maximum rate for any crop as specified in Section 8.0 
 
7.2 Perennial Weeds in Region A 
Perennial Grass 
Species1 Application Height (in) Rate7 
 (fl oz/A) 
Special Rate6,7 
(fl oz/A) 
Bermudagrass2 1st 
 
 
2nd 
4-8 
(runner length) 
 
4-8 
12 
 
 
8 
16-24 
 
 
12-24 
Quackgrass3 1st 
 
2nd 
6-10 
 
Up to 10 
12 
 
8 
16-24 
 
12-24 
Rhizome 
johnsongrass4 
1st 
 
2nd 
8-18 
 
6-12 
12 
 
8 
16-24 
 
12-24 
Wirestem muhly5 1st/2nd 4-12 12 16-24 
Footnotes 
1Scientific names provided in Section 11.3 
2Make second application to bermudagrass if regrowth occurs (usually about 4 weeks after first 
application). Bermudagrass control may be improved by directing the spray beneath the crop 
canopy. To improve coverage, make applications in a minimum of 15 gal/A. 
3Make second application 2-3 weeks after the first, but before the quackgrass exceeds 10 inches in 
height. Always use 1% v/v crop oil concentrate. In no-till soybeans, a preplant application of a 
burndown herbicide (including Gramoxone® SL 3.0) is advised. DO NOT make spot treatments. 
4Make first application before the boot stage. In eastern Oklahoma, the Brazos Bottoms, the 
Blacklands, Coastal Bend and Rio Grande areas of eastern Texas, make the first application at 8-
12 inches. If new shoots emerge or regrowth occurs, make a second application at 4-6 inches. 
5Make second application if regrowth occurs. 
6Use the special rate when grass of Fusilade DX Herbicide under heavy grass pressure and/or when 
grasses are at maximum height. 
7For lb ai fluazifop-p-butyl per acre, refer to Section 11.2 
Use Restrictions 
1) DO NOT exceed the maximum rate for any crop as specified in Section 8.0

23 
 
 
7.3 Annual Weeds in Region B (for all uses except coffee) 
Annual Grass Species1 Height (in) Max # of Leaves Rate (fl oz/A)6 
Barnyardgrass2 1-2 3 12 
Canarygrass, Littleseed3 2-4 4 12 
Crabgrass, Large3 1-2 3 12 
Crabgrass, Smooth3.4 1-2 4 12 
Johnsongrass, seedling 2-4 3 8 
Junglerice3 2-3 3 12 
Panicum, Fall3,4 2-6 6 12 
Panicum, Texas3,4 8 8 12 
Rabbitfootgrass3 2-4 4 12 
Volunteer barley 2-4 3 12 
Volunteer corn3,5 12-18 6 12 
Volunteer milo 2-4 4 12 
Volunteer oats 2-4 3 12 
Volunteer wheat 2-4 3 12 
Wild Oats4 2-4 4 12 
Footnotes 
1Scientific names provided in Section 11.3 
2Use 24 fl oz/A in California and Arizona 
3Not labeled for control of this species in Arizona and California. 
4For control of these species in Colorado, Oklahoma, and Texas. 
5Provides suppression of sethoxydim-resistant volunteer corn and control of Roundup Ready®, 
LibertyLink® and IMI-Corn® volunteer corn. 
6For lb ai fluazifop-p-butyl per acre, refer to Section 11.2 
Use Restrictions 
1) DO NOT exceed the maximum rate for any crop as specified in Section 8.0

24 
 
 
7.4 Perennial Weeds in Region B (for all uses except coffee) 
Perennial Grass 
Species1 Application Height (in) Rate7 (fl oz/A) 
Bermudagrass2,3 1st 
 
 
2nd 
4-8 
(runner length) 
 
4-8 
16-24 
 
 
16-24 
Rhizome 
johnsongrass4,5 
1st 
 
2nd 
12-18 
 
12-18 
16-246 
 
16-246 
Footnotes 
1Scientific names provided in Section 11.3 
2Make second application to bermudagrass if regrowth occurs (usually about 4 weeks after first 
application). Bermudagrass control may be improved by directing the spray beneath the crop 
canopy. To improve coverage, make applications in a minimum of 20 gal/A. 
3In Colorado, Oklahoma (west of Interstate 35), and Texas (west of Interstate 35) under good soil 
moisture and favorable growing conditions, make applications at reduced rates of 12-16 fl oz/A. 
4Make first application before the boot stage. If new shoots emerge or regrowth occurs, make a 
second application (usually about 4 weeks after the first application). 
5In Colorado, Oklahoma (west of Interstate 35) and Texas (west of Interstate 35) under good soil 
moisture and favorable growing conditions, make the first application to 8-18 inch johnsongrass at 
a reduced rate of 12 fl oz/A. Make the second application to 6-12 inch johnsongrass at a rate of 12 
fl oz/A. 
6For California only, make first application to johnsongrass at 16 fl oz/A; and second application at 
12-16 fl oz/A. 
7For lb ai fluazifop-p-butyl per acre, refer to Section 11.2 
Use Restrictions 
1) DO NOT exceed the maximum rate for any crop as specified in Section 8.0

25 
 
8.0 CROP USE DIRECTIONS 
8.1 Asparagus 
Crop 
Asparagus 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS – ALL STATES EXCEPT CA AND AZ 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: 48 fl oz/A/year (0.75 lb ai/A/year) 
5) DO NOT make more than 2 applications per year 
6) Preharvest Interval (PHI): 1 day 
USE RESTRICTIONS – CALIFORNIA ONLY 
7) Refer to Section 5.1 for additional product use restrictions. 
8) Maximum Single Application Rate: 12 fl oz/A (0.188 lb ai/A) 
9) Minimum Application Interval: 21 days 
10) Maximum Annual Rate: 24 fl oz/A/year (0.375 lb ai/A/year) 
11) DO NOT make more than 2 applications per year 
12) Preharvest Interval (PHI): 1 day

26 
 
8.2 Bananas and Plantains 
Crops (including cultivars, varieties, and/or hybrids of these) 
Bananas and Plantains 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
3) Minimum Application Interval: 30 days 
4) Maximum Annual Rate: 72 fl oz/A/year (1.125 lb ai/A/year) 
5) DO NOT make more than 3 applications per year 
6) Preharvest Interval (PHI): 0 day

27 
 
 
8.3 Blueberry, Lowbush; Lingonberry; and Currant, Native 
Crops (including cultivars, varieties, and/or hybrids of these) 
Blueberry, lowbush; Lingonberry; and Currant, native 
Application Timing Rate (fl oz/A) Use Directions 
Apply during the non-
bearing year or during the 
year of establishment with 
the last application no later 
than 10 months before 
harvest. 
 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: 48 fl oz/A/year (0.75 lb ai/A/year) 
5) DO NOT make more than 2 applications per year 
6) DO NOT apply within 10 months of harvest

28 
 
 
8.4 Bushberry Subgroup 13-07B excluding Blueberry, Lowbush; 
Lingonberry; and Currant, Native 
Crops (including cultivars, varieties, and/or hybrids of these) 
Aronia berry; blueberry, highbush; buffalo currant; Chilean guava; cranberry, highbush; currant, black; 
currant, red; elderberry; European barberry; gooseberry; honeysuckle, edible; huckleberry; jostaberry; 
Juneberry (Saskatoon berry); salal; and sea buckthorn 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: 48 fl oz/A/year (0.75 lb ai/A/year) 
5) DO NOT make more than 2 applications per year 
6) Preharvest Interval (PHI): 1 day

29 
 
 
8.5 Brassica Head and Stem Vegetable, Group 5-16 
Crops (including cultivars, varieties, and/or hybrids of these) 
Broccoli; Brussels sprouts; cabbage; cabbage, Chinese, napa; cauliflower 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: 48 fl oz/A/year (0.75 lb ai/A/year) 
5) DO NOT make more than 2 applications per year 
6) Preharvest Interval (PHI): 14 days

30 
 
 
8.6 Brassica Leafy Greens, Subgroup 04-16B 
Crops (including cultivars, varieties, and/or hybrids of these) 
Arugula; broccoli, Chinese; broccoli raab; cabbage, abyssinian; cabbage, Chinese, bok choy; cabbage, 
seakale; collards; cress, garden; cress, upland; hanover salad; kale; maca, leaves; mizuna; mustard 
greens; radish, leaves; rape greens; rocket, wild; shepherd's purse; turnip greens; watercress 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: 48 fl oz/A/year (0.75 lb ai/A/year) 
5) DO NOT make more than 2 applications per year 
6) Preharvest Interval (PHI): 14 days 
7) For applications made to watercress, production fields must be drained of water at least 24 hours 
prior to application and water must not be reapplied to the field for a minimum of 24 hours following 
the application.

31 
 
 
8.7 Caneberry, Subgroup 13-07A 
Crops (including cultivars, varieties, and/or hybrids of these) 
Blackberry; loganberry; raspberry, black and red; wild raspberry 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: 48 fl oz/A/year (0.75 lb ai/A/year) 
5) DO NOT make more than 2 applications per year 
6) Preharvest Interval (PHI): 1 day

32 
 
8.8 Carrots 
Crops (including cultivars, varieties, and/or hybrids of these) 
Carrots (including seed carrots) 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: 48 fl oz/A/year (0.75 lb ai/A/year) 
5) DO NOT make more than 2 applications per year 
6) Preharvest Interval (PHI): 45 days

33 
 
 
8.9 Leaf Petiole Vegetable, Subgroup 22B 
Crops (including cultivars, varieties, and/or hybrids of these) 
Cardoon; celery; celery, Chinese; fuki; rhubarb; udo; and zuiki 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 16 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 16 fl oz/A (0.25 lb ai/A) 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: 32 fl oz/A/year (0.5 lb ai/A/year) 
5) DO NOT make more than 2 applications per year 
6) Preharvest Interval (PHI): 14 days

34 
 
 
8.10 Citrus, Group 10-10 
Crops (including cultivars, varieties, and/or hybrids of these) 
Australian desert lime; Australian finger-lime; Australian round lime; Brown River finger lime; 
calamondin; citron; citrus hybrids; grapefruit; Japanese summer grapefruit; kumquat; lemon; lime; 
Mediterranean mandarin; mount white lime; New Guinea wild lime; orange, sour; orange, sweet; 
pummelo; Russell River lime; satsuma mandarin; sweet lime; tachibana orange; Tahiti lime; tangelo; 
tangerine (mandarin); tangor; trifoliate orange; and uniq fruit 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
3) Minimum Application Interval: 21 days 
4) Maximum Annual Rate: 72 fl oz/A/year (1.125 lb ai/A/year) 
5) DO NOT make more than 3 applications per year 
6) Preharvest Interval (PHI): 14 days

35 
 
 
8.11 Coffee (Only for use in Hawaii) 
Crops 
Coffee 
Application Timing Rate (fl oz/A) Use Directions 
Apply as a postemergence 
ground application 
16 - 24 Apply with sufficient spray volume to 
ensure complete coverage of the 
target grasses. Applications can be 
made as a broadcast, directed 
postemergence, strip band, or spot 
spray application. 
 
Make applications when annual 
grasses are 2-8 inches tall, but before 
tillering and/or heading 
 
Refer to Section 4.4.5 for spray 
additives. 
Annual Weeds controlled 
Barnyardgrass 
Broadleaf signalgrass 
Crabgrass, large 
Crabgrass, smooth 
Crabgrass, southern 
Crabgrass, tropical 
Fall panicum 
Field sandbur 
Foxtail, giant 
Foxtail, green 
Foxtail, yellow 
Goosegrass 
Guineagrass, seedling 
Itchgrass 
Italian ryegrass 
Johnsongrass, seedling 
Junglerice 
Prairie cupgrass 
Red Rice 
Shattercane/Wildcane/Volunteer 
milo 
Sorghum almum 
Southern sandbur 
Southwestern cupgrass 
Texas panicum 
Volunteer barley 
Volunteer corn 
Volunteer oats 
Volunteer rye 
Volunteer wheat 
Wild oats 
Wild proso millet 
Witchgrass 
Woolly cupgrass 
Perennial Weeds Controlled Growth stage 
Bermudagrass 
Kikuyugrass 
Quackgrass 
Rhizome johnsongrass 
Wirestem muhly 
4-8" runners 
4-8" runners 
6-10" 
8-18" tall and before boot stage 
4-12" tall and before seedhead initiation 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Only for use in Hawaii 
3) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
4) Minimum Application Interval: 14 days 
5) Maximum Annual Rate: 48 fl oz/A/year (0.75 lb ai/A/year) 
6) DO NOT make more than 2 applications per year 
7) Preharvest Interval (PHI): 1 day

36 
 
 
 
8.12 Cotton 
8.12.1 Fusilade DX Herbicide Solo 
Crops 
Cotton 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
• Fusilade DX Herbicide can be used sequentially with other labeled cotton herbicides. For 
sequential applications, allow 2 to 3 days after the application of Fusilade DX Herbicide before 
applying a broadleaf herbicide or mixture. In situations where the broadleaf herbicide or mixture is 
applied first, apply Fusilade DX Herbicide when the grass weeds begin to develop new leaves 
(generally around 7 days). 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: 48 fl oz/A/year (0.75 lb ai/A/year) 
5) DO NOT make more than 2 applications per year 
6) Preharvest Interval (PHI): 90 days 
7) DO NOT apply to cotton after boll set 
8) DO NOT graze or harvest for forage or hay

37 
 
 
8.12.2 Tank Mix and Sequential Applications for Cotton 
Tank-mix Brands Rate Use Directions 
Glyphosate products (including 
Roundup® brands) 
4 – 6 fl oz 
Fusilade DX 
Herbicide + 
refer to 
glyphosate 
product label 
for use rate 
For control of volunteer corn including volunteer 
Roundup Ready corn in Roundup Ready cotton, 
apply Fusilade DX Herbicide at 4-6 fl oz/A tank 
mixed with glyphosate products labeled for this 
use. Use the 4 fl oz/A rate only under the following 
conditions: 
• Application under favorable soil moisture and 
humidity conditions which normally occur 
within a few days after rainfall or irrigation. 
• Avoid extreme air temperatures. 
• Application when volunteer corn is less than 12 
inches tall. 
• Application with 0.25% v/v COC. This COC is 
in addition to the additives required by the 
glyphosate product. 
Use the 6 fl oz/A rate if these conditions do not 
exist. 
See Appendix 11.1 for the EPA Registration Number and Active Ingredient(s) in each listed brand. 
Precautions 
1) Refer to additional tank mixing instructions and precautions in Section 4.0 
2) It is the pesticide user’s responsibility to ensur e that all products are registered for the intended 
use. Read and follow the applicable restrictions and limitations and directions for use on all 
product labels involved in tank mixes or sequential applications. Users must follow the most 
restrictive directions for use and precautionary statements of each product in the tank mixture. 
USE RESTRICTIONS 
Refer to Section 8.12.1 for cotton restrictions 
 
8.13 Dry Beans 
Crop (including cultivars, varieties, and/or hybrids of these) 
Dry beans 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options:

38 
 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: 48 fl oz/A/year (0.75 lb ai/A/year) 
5) DO NOT make more than 2 applications per year 
6) Preharvest Interval (PHI): 60 days 
7) DO NOT apply to cow peas

39 
 
8.14 Fine Fescue Grasses Grown for Seed (Only for Use in Idaho, 
Oregon, and Washington) 
Crop (including cultivars, varieties, and/or hybrids of these) 
Fine fescue grasses grown for seed 
Application Timing Rate (fl oz/A) Use Directions 
Fall Application - Apply at 
8 fl oz/A to actively growing 
downy brome in the 2 - 4 
inch stage. Apply at 12 - 16 
fl oz/A to actively growing 
quackgrass or bentgrass in 
the 6 - 10 inch stage and 
make a second application 
of 12 - 16 fl oz/A before 
regrowth exceeds 10 
inches. 
 
Spring Application - Apply 
at 8 - 16 fl oz/A to actively 
growing grasses. Downy 
brome in the 2 - 4 inch stage 
can be controlled by the 
lower rate but larger, 
established grasses (4 - 6 
inches) may need the higher 
rate for adequate control. 
Apply at 12 - 16 fl oz per 
acre when quackgrass and 
bentgrass is at the 6 - 10 
inch stage and make a 
second application of 12 - 
16 fl oz/A before regrowth 
exceeds 10 inches. 
8 - 16 Apply with sufficient spray volume 
and pressure to ensure complete 
coverage of target grasses. 
Applications can be made as a 
broadcast, strip band, or spot spray 
application. Refer to Section 4.4.5 for 
spray additives. 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
Precautions: 
• For use on fine fescues (Chewings, Creeping Red and Hard Fescue varieties) grown for seed. 
Other types of fescues may be injured by Fusilade DX Herbicide. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions 
2) Only for use in Idaho, Oregon, and Washington 
3) DO NOT use on tall fescue 
4) DO NOT apply after fescue grass seedhead develops into the boot stage 
5) Maximum Single Application Rate: 16 fl oz/A (0.25 lb ai/A) 
6) Minimum Application Interval: 14 days 
7) Maximum Annual Rate: 48 fl oz/A/year (0.75 lb ai/A/year) 
8) DO NOT make more than 3 applications per year 
9) DO NOT harvest forage within 14 days of last application

40 
 
8.15 Lettuce, Leaf and Head 
Crop (including cultivars, varieties, and/or hybrids of these) 
Lettuce, leaf and head 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: 48 fl oz/A/year (0.75 lb ai/A/year) 
5) DO NOT make more than 2 applications per year 
6) Preharvest Interval (PHI): 14 days

41 
 
 
8.16 Low Growing Berry, Subgroup 13-07G 
Crops (including cultivars, varieties, and/or hybrids of these) 
Bearberry; bilberry; blueberry, lowbush; cloudberry; cranberry; lingonberry; muntries; partridgeberry; 
and strawberry 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 16 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 16 fl oz/A (0.25 lb ai/A) 
3) Maximum Annual Rate: 16 fl oz/A/year (0.25 lb ai/A/year) 
4) DO NOT make more than 1 application per year 
5) Preharvest Interval (PHI): 14 days

42 
 
 
8.17 Macadamia Nuts 
Crop (including cultivars, varieties, and/or hybrids of these) 
Macadamia nuts 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
3) Minimum Application Interval: 21 days 
4) Maximum Annual Rate: 48 fl oz/A/year (0.75 lb ai/A/year) 
5) DO NOT make more than 2 applications per year 
6) Preharvest Interval (PHI): 1 day 
7) DO NOT graze animals in treated area or feed cover crops of treated macadamia groves to 
livestock

43 
 
 
8.18 Onion, Bulb, Subgroup 3-07A 
Crops (including cultivars, varieties, and/or hybrids of these) 
Daylily, bulb; fritillaria, bulb; garlic, bulb; garlic, great-headed, bulb; garlic, serpent, bulb; lily, bulb; 
onion, bulb; onion, Chinese, bulb; onion, pearl; onion, potato, bulb; and shallot, bulb 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: 48 fl oz/A/year (0.75 lb ai/A/year) 
5) DO NOT make more than 2 applications per year 
6) Preharvest Interval (PHI): 45 days

44 
 
 
8.19 Onion, Green, Subgroup 3-07B 
Crops (including cultivars, varieties, and/or hybrids of these) 
Chive, fresh leaves; chive, Chinese, fresh leaves; elegans hosta; fritillaria, leaves; kurrat; lady’s leek; 
leek; leek, wild; onion, Beltsville bunching; onion, fresh; onion, green; onion, macrostem; onion, tree, 
tops; onion, Welsh, tops; and shallot, fresh leaves 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: 48 fl oz/A/year (0.75 lb ai/A/year) 
5) DO NOT make more than 2 applications per year 
6) Preharvest Interval (PHI): 14 days

45 
 
 
8.20 Papaya 
Crop 
Papaya 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: 72 fl oz/A/year (1.125 lb ai/A/year) 
5) DO NOT make more than 3 applications per year 
6) Preharvest Interval (PHI): 0 day

46 
 
 
8.21 Peanuts 
Crop 
Peanuts 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: 48 fl oz/A/year (0.75 lb ai/A/year) 
5) DO NOT make more than 2 applications per year 
6) Preharvest Interval (PHI): 40 days 
7) DO NOT feed green immature plants to livestock or harvest for livestock feed

47 
 
 
8.22 Pecans 
Crop 
Pecans 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: 72 fl oz/A/year (1.125 lb ai/A/year) 
5) DO NOT make more than 3 applications per year 
6) Preharvest Interval (PHI): 30 days 
7) DO NOT graze animals in treated area

48 
 
 
8.23 Small Fruit Climbing Subgroup, 13-07F (except fuzzy kiwifruit) 
Crops (including cultivars, varieties, and/or hybrids of these) 
Amur river grape; gooseberry; grape; kiwifruit, hardy; maypop; and schisandra berry 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: 72 fl oz/A/year (1.125 lb ai/A/year) 
5) DO NOT make more than 3 applications per year 
6) Preharvest Interval (PHI): 50 days

49 
 
 
8.24 Soybeans 
8.24.1 Fusilade DX Herbicide Solo 
Crop 
Soybeans 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 8.24.2 for tank-mix options. 
• Fusilade DX Herbicide can be used sequentially with other labeled soybean herbicides. For 
sequential applications, allow 2 to 3 days after the application of Fusilade DX Herbicide before 
applying a broadleaf herbicide or mixture. In situations where the broadleaf herbicide or mixture is 
applied first, apply Fusilade DX Herbicide when the grass weeds begin to develop new leaves 
(around 7 days). 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
• DO NOT apply more than 24 fl oz/A to soybeans pre-bloom (up to V5 growth stage) (0.375 lb 
ai/A) 
• DO NOT apply more than 6 fl oz/A to soybeans at/after bloom (R1 growth stage or later) (0.094 
lb ai/A) 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: 30 fl oz/A/year (0.469 lb ai/A/year) 
5) DO NOT make more than 3 applications per year (not to exceed 30 fl oz/A/yr) 
6) Preharvest Interval (PHI): 60 days

50 
 
 
8.24.2 Tank Mix and Sequential Applications for Soybeans – Region A 
Tank-mix Brands Rate Use Directions 
Fusilade DX Herbicide + 
Flexstar® 
12 fl oz + 
0.75-1.5 pt 
Apply with 0.5-1% COC or 0.25-0.5% NIS 
Fusilade DX Herbicide + 
Flexstar® + 
Basagran® Herbicide 
12 fl oz + 
0.75-1.5 pt + 
Refer to 
Basagran® 
Herbicide label 
for use rate 
Apply with 0.5-1% COC or 0.25-0.5% NIS 
Fusilade DX Herbicide + 
Reflex® Herbicide 
12 fl oz + 
0.75-1.5 pt 
Apply with 0.5-1% COC or 0.25-0.5% NIS 
Fusilade DX Herbicide + 
Reflex® Herbicide + 
Basagran Herbicide 
12 fl oz + 
0.75-1.5 pt + 
Refer to 
Basagran 
Herbicide label 
for use rate 
Apply with 0.5-1% COC or 0.25-0.5% NIS 
Fusilade DX Herbicide + 
Basagran Herbicide 
12 fl oz + 
Refer to 
Basagran 
Herbicide label 
for use rate 
Apply with 0.5-1% COC or 0.25-0.5% NIS 
Fusilade DX Herbicide + 
Ultra Blazer® 
12 fl oz + 
Refer to Ultra 
Blazer® label 
for use rate 
Apply with 0.25% NIS 
Fusilade DX Herbicide + 
Classic® Herbicide 
6-8 fl oz + 
Refer to 
Classic® 
Herbicide label 
for use rate 
To control volunteer corn, shattercane, and 
broadleaf weeds in soybeans, apply 6-8 fl oz of 
Fusilade DX Herbicide with labeled rates of Classic 
Herbicide. 
The 8 fl oz/A rate may be necessary under 
conditions of low humidity and low soil moisture 
and may be used when volunteer corn and/or 
shattercane foliage is dense or has reached the 
maximum specified growth stage. Apply with 1% 
COC or 0.25% NIS (% v/v) 
Fusilade DX Herbicide + 
Pursuit® Herbicide 
4-6 fl oz + 
Refer to 
Pursuit® 
Herbicide label 
for use rate 
To control volunteer corn, shattercane, and 
broadleaf weeds in soybeans, apply 4-6 fl oz of 
Fusilade DX Herbicide with labeled rates of Pursuit 
Herbicide. 
The 6 fl oz/A rate may be necessary under 
conditions of low humidity and low soil moisture 
and may be used when volunteer corn and/or 
shattercane foliage is dense or has reached the 
maximum specified growth stage. Apply with 1% 
COC or 0.25% NIS (% v/v) [and liquid fertilizer]. 
Glyphosate products (including 
Roundup® brands) 
4-6 fl oz + 
Refer to 
glyphosate 
label for use 
rate 
For control of volunteer corn including volunteer 
Roundup Ready corn in Roundup Ready 
soybeans, apply Fusilade DX Herbicide at 4-6 fl 
oz/A tank mixed with glyphosate products labeled

51 
 
(glyphosate 
tolerant 
soybean only) 
for this use. Use the 4 fl oz/A rate only under the 
following conditions: 
• Application under favorable soil moisture and 
humidity conditions which normally occur 
within a few days after rainfall or irrigation. 
• Avoid extreme air temperatures. 
• Application when volunteer corn is less than 12 
inches tall. 
• Application with 0.25% v/v COC. This COC is 
in addition to the additives required by the 
glyphosate product. 
Use the 6 fl oz/A rate if these conditions do not 
exist. 
See Appendix 11.1 for the EPA Registration Number and Active Ingredient(s) in each listed brand. 
Precautions 
1) Refer to additional tank mixing instructions and precautions in Section 4.0 
2) Under certain conditions, a tank mixture of Fus ilade DX Herbicide with one or more of the above-
mentioned broadleaf herbicides may cause a reduction in grass activity and possible increase in 
crop injury as compared to the products used alone. If grass regrowth occurs following an 
application of the tank mix or an additional flush of grasses emerge, make a second application 
of Fusilade DX Herbicide to actively growing grass weeds, as per the label directions. When 
perennial grasses are the predominant grass to be controlled, a sequential application is 
advised. 
3) It is the pesticide user’s responsibility to ensur e that all products are registered for the intended 
use. Read and follow the applicable restrictions and limitations and directions for use on all 
product labels involved in tank mixes or sequential applications. Users must follow the most 
restrictive directions for use and precautionary statements of each product in the tank mixture. 
USE RESTRICTIONS 
Refer to Section 8.24.1 for soybean restrictions 
 
8.24.3 Tank Mix and Sequential Applications for Soybeans – Region B 
Tank-mix Brands Rate Use Directions 
Fusilade DX Herbicide + 
Basagran Herbicide 
12-24 fl oz + 
Refer to Basagran label 
for use rate 
Apply with 0.5-1% COC or 
0.25-0.5% NIS (% v/v) 
Fusilade DX Herbicide + 
Ultra Blazer 
12-24 fl oz + 
Refer to Ultra Blazer 
label for use rate 
Apply with 0.25-0.5% NIS (%v/v) 
Fusilade DX Herbicide + 
Classic Herbicide 
12 fl oz + 
Refer to Classic label for 
use rate 
To control volunteer corn, shattercane, 
and broadleaf weeds in soybeans, apply 
12 fl oz of Fusilade DX Herbicide with 
labeled rates of Classic Herbicide. Apply 
with 1% COC or 0.25% NIS (% v/v) 
Glyphosate products (including 
Roundup® brands) 
4-6 fl oz + 
Refer to glyphosate label 
for use rate (glyphosate 
tolerant soybean only) 
 
For control of volunteer corn including 
volunteer Roundup Ready corn in 
Roundup Ready soybeans, apply 
Fusilade DX Herbicide at 4-6 fl oz/A tank 
mixed with glyphosate products labeled 
for this use. Use the 4 fl oz/A rate only 
under the following conditions:

52 
 
• Application under favorable soil 
moisture and humidity conditions 
which normally occur within a few 
days after rainfall or irrigation. 
• Avoid extreme air temperatures. 
• Application when volunteer corn is 
less than 12 inches tall. 
• Application with 0.25% v/v COC. 
This COC is in addition to the 
additives required by the glyphosate 
product. 
Use the 6 fl oz/A rate if these conditions 
do not exist. 
See Appendix 11.1 for the EPA Registration Number and Active Ingredient(s) in each listed brand. 
Precautions 
1) Refer to additional tank mixing instructions and precautions in Section 4.0 
2) Under certain conditions, a tank mixture of Fus ilade DX Herbicide with one or more of the above-
mentioned broadleaf herbicides may cause a reduction in grass activity and possible increase in 
crop injury as compared to the products used alone. If grass regrowth occurs following an 
application of the tank mix or an additional flush of grasses emerge, make a second application 
of Fusilade DX Herbicide to actively growing grass weeds, as per the label directions. When 
perennial grasses are the predominant grass to be controlled, a sequential application is 
advised. 
3) It is the pesticide user’s responsibility to ensur e that all products are registered for the intended 
use. Read and follow the applicable restrictions and limitations and directions for use on all 
product labels involved in tank mixes or sequential applications. Users must follow the most 
restrictive directions for use and precautionary statements of each product in the tank mixture. 
Restrictions 
Refer to Section 8.24.1 for soybean restrictions

53 
 
 
8.25 Stone Fruit, Group 12-12 
Crops (including cultivars, varieties, and/or hybrids of these) 
Apricot; apricot, Japanese; capulin; cherry, black; cherry, Nanking; cherry, sweet; cherry, tart; Jujube, 
Chinese; nectarine; peach; plum; plum, American; plum, beach; plum, Canada; plum, cherry; plum, 
Chickasaw; plum, Damson; plum, Japanese; plum, Klamath; plum, prune; plumcot; and sloe 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
3) Minimum Application Interval: 21 days 
4) Maximum Annual Rate: 72 fl oz/A/year (1.125 lb ai/A/year) 
5) DO NOT make more than 3 applications per year 
6) Preharvest Interval (PHI): 14 days 
7) DO NOT graze animals in treated area

54 
 
 
8.26 Sugar Beets 
Crop 
Sugar beets 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: 48 fl oz/A/year (0.75 lb ai/A/year) 
5) DO NOT make more than 2 applications per year 
6) Preharvest Interval (PHI): 90 days

55 
 
 
8.27 Tabasco Peppers (Only for Use in Louisiana) 
Crop 
Tabasco peppers 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 24 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
. 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Only for use in Louisiana 
3) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
4) Minimum Application Interval: 14 days 
5) Maximum Annual Rate: 48 fl oz/A/year (0.75 lb ai/A/year) 
6) DO NOT make more than 2 applications per year 
7) Preharvest Interval (PHI): 45 days

56 
 
8.28 Tuberous and Corm Vegetables, Subgroup 1D (except potato) 
Crops (including cultivars, varieties, and/or hybrids of these) 
Arracacha; arrowroot; artichoke, Chinese; artichoke, Jerusalem; canna, edible; cassava, bitter and 
sweet; chayote (root); chufa; dasheen (taro); ginger; leren; sweet potato; tanier; turmeric; yam bean; 
and yam, true 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
6 - 12 Applications can be made as a 
broadcast, directed postemergence, 
strip band, or spot spray. Apply with 
sufficient spray volume and pressure 
to ensure complete coverage of 
target grasses. Refer to Section 
4.4.5 for spray additives. 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) Maximum Single Application Rate: 12 fl oz/A (0.188 lb ai/A) 
3) Minimum Application Interval: 14 days 
4) Maximum Annual Rate: 48 fl oz/A/year (0.75 lb ai/A/year) 
5) DO NOT make more than 4 applications per year 
6) Preharvest Interval (PHI): 14 days

57 
 
 
8.29 Non-bearing Crops 
Crops (including cultivars, varieties, and/or hybrids of these) 
Acerola (West Indian Cherry)*, almonds, apples, asparagus, avocados, berries, conifers* (including 
Christmas tree plantings, nursery beds, and seedling establishment), dates, figs, filberts, Florigraze 
rhizoma peanuts* (nursery stock only), ginseng*, grapes, grapefruit, guava*, jojoba, kiwi*, lemons, 
limes, macadamia, mango*, olives, oranges, pears, pineapple, pistachios, pomegranates, tangelos, 
tangerines, walnuts 
*Not for use in California 
Application Timing Rate (fl oz/A) Use Directions 
Apply to actively growing 
grasses before they exceed 
the specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
16 - 24 Spray to obtain thorough coverage of 
grass foliage, but not to runoff. 
Repeat treatments may be necessary 
for grass control. 
 
Refer to Section 4.4.5 for spray 
additives. 
 
*Not applicable in California 
Annual Weeds controlled 
Barnyardgrass 
Broadleaf signalgrass 
Crabgrass, large 
Crabgrass, smooth 
Crabgrass, southern 
Crabgrass, tropical 
Downy brome* 
Fall panicum 
Field sandbur 
Foxtail, giant 
Foxtail, green 
Foxtail, yellow 
Goosegrass 
Guineagrass, seedling 
Itchgrass 
Italian ryegrass 
Johnsongrass, seedling 
Red Rice 
Shattercane/Wildcane/Volunteer 
milo 
Sorghum almum 
Southern sandbur 
Southwestern cupgrass 
Texas panicum 
Volunteer barley 
Volunteer corn 
Volunteer oats 
Volunteer rye 
Volunteer wheat 
Wild Oats 
Wild proso millet 
Witchgrass 
Woolly cupgrass 
*Not registered in California for use on this species 
Perennial Weeds Controlled Growth stage 
Bermudagrass 
Guineagrass 
Kikuyugrass* 
Quackgrass 
Rhizome johnsongrass 
Torpedograss** 
 
Wirestem muhly 
4-8" runners 
6-12" tall before seedhead initiation 
4-8" runners 
6-10" 
8-18" tall and before boot stage 
3-6" tall (1st application) 
2-3" tall (subsequent application) 
4-12" tall and before seedhead initiation 
 
*Not registered in California for use on this species 
**Use 24 fl oz/A per application. Three applications may be needed. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
Precautions: 
• Nonbearing crops not listed need to be screened for phytotoxicity prior to widespread use 
• Avoid contact of spray with foliage by using directed sprays

58 
 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) DO NOT use or store in or around the home 
3) DO NOT apply to trees, vines, or other listed crops that will be harvested for food/feed within 1 
year after application 
4) DO NOT apply to asparagus from which spears will be harvested within 1 year of treatment. Refer 
to Section 8.1 for use in asparagus that will be harvested within 1 year 
5) DO NOT graze or harvest Florigraze rhizoma peanuts for 1 year after treatment 
6) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
7) Minimum Application Interval: 14 days 
8) Maximum Annual Rate: 72 fl oz/A/year (1.125 lb ai/A/year) 
9) DO NOT make more than 3 applications per year 
 
8.30 Nonfood Uses: Fallow Agricultural Land and Other Noncrop Areas 
of Farms 
Use Sites 
Agricultural fallow land of farms, and other noncrop areas including areas around farm buildings, farm 
equipment storage yards, and fence rows. 
Application Timing Rate (fl oz/A) Use Directions 
Apply postemergence to 
actively growing grasses 
before they exceed the 
specified growth stages. 
 
Apply when the first grass 
species in a mixed grass 
weed population reaches 
the specified growth stage 
for treatment. 
16 - 24 Spray to obtain thorough coverage of 
grass foliage, but not to runoff. 
Repeat treatments may be necessary 
for grass control. 
 
Refer to Section 4.4.5 for spray 
additives. 
 
 
For Weed Control: 
• Refer to Section 7.0 for list of weeds controlled. 
Annual Weeds controlled 
Barnyardgrass 
Broadleaf signalgrass 
Crabgrass, large 
Crabgrass, smooth 
Crabgrass, southern 
Crabgrass, tropical 
Downy brome* 
Fall panicum 
Field sandbur 
Foxtail, giant 
Foxtail, green 
Foxtail, yellow 
Goosegrass 
Guineagrass, seedling 
Itchgrass 
Italian ryegrass 
Johnsongrass, seedling 
Red Rice 
Shattercane/Wildcane/Volunteer 
milo 
Sorghum almum 
Southern sandbur 
Southwestern cupgrass 
Texas panicum 
Volunteer barley 
Volunteer corn 
Volunteer oats 
Volunteer rye 
Volunteer wheat 
Wild Oats 
Wild proso millet 
Witchgrass 
Woolly cupgrass 
*Not registered in California for use on this species 
Perennial Weeds Controlled Growth stage 
Bermudagrass 
Guineagrass 
Kikuyugrass* 
Quackgrass 
Rhizome johnsongrass 
Torpedograss** 
4-8" runners 
6-12" tall before seedhead initiation 
4-8" runners 
6-10" 
8-18" tall and before boot stage 
3-6" tall (1st application)

59 
 
 
Wirestem muhly 
2-3" tall (subsequent application) 
4-12" tall and before seedhead initiation 
 
*Not registered in California for use on this species 
**Use 24 fl oz/A per application. Three applications may be needed. 
 Tank Mix or Sequential Application Options: 
• Refer to Section 9.1.3 for tank-mix options. 
Resistance Management: 
• Refer to Section 3.1. 
Precautions: 
• Nonbearing crops not listed need to be screened for phytotoxicity prior to widespread use 
• Avoid contact of spray with foliage by using directed sprays 
USE RESTRICTIONS 
1) Refer to Section 5.1 for additional product use restrictions. 
2) DO NOT use or store in or around the home 
3) Maximum Single Application Rate: 24 fl oz/A (0.375 lb ai/A) 
4) Minimum Application Interval: 14 days 
5) Maximum Annual Rate: 72 fl oz/A/year (1.125 lb ai/A/year) 
6) DO NOT make more than 3 applications per year 
 
9.0 STORAGE AND DISPOSAL 
STORAGE AND DISPOSAL 
DO NOT contaminate water, food, or feed, by storage or disposal. 
Pesticide Storage 
Store in original container only. Keep container closed when not in use. Do not store near 
food or feed. In case of spill or leak on floor or paved surfaces, soak up with sand, earth or 
synthetic absorbent. Remove to chemical waste area. 
Pesticide Disposal 
DO NOT contaminate water, food, or feed by storage or disposal. Open dumping is 
prohibited. Wastes resulting from the use of this product are toxic. Improper disposal of 
unused pesticide, spray mixture, or rinsate is a violation of federal law. Pesticide, spray 
mixture, or rinsate that cannot be used according to label instructions must be disposed of 
according to federal, state, or local procedures. For guidance in proper disposal methods, 
contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste 
representative at the nearest EPA Regional Office. 
Container Handling [(less than or equal to 5 gallons)] 
Non-refillable [plastic] container. DO NOT reuse or refill this container. Triple rinse 
container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the 
remaining contents into application equipment or a mix tank and drain for 10 seconds after 
the flow begins to drip. Fill the container ¼ full with water and recap. Shake for 10 seconds. 
Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. 
Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times.

60 
 
Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by 
incineration, or by other procedures approved by state and local authorities. 
Container Handling [(greater than 5 gallons)] 
Non-refillable [plastic] container. DO NOT reuse or refill this container. Triple rinse 
container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the 
remaining contents into application equipment or a mix tank. Fill the container ¼ full with 
water. Replace and tighten closures. Tip container on its side and roll it back and forth, 
ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and 
tip it back and forth several times. Turn the container over onto its other end and tip it back 
and forth several times. Empty the rinsate into application equipment or a mix tank or store 
rinsate for later use or disposal. Repeat this procedure two more times. Then offer for 
recycling if available or puncture and dispose of in a sanitary landfill, or by incineration, or by 
other procedures approved by state and local authorities. 
 
Container Handling [(greater than 5 gallons)] 
Refillable [plastic] container. Refill this container with pesticide only. DO NOT reuse this 
container for any other purpose. Cleaning the container before final disposal is the 
responsibility of the person disposing of the container. Cleaning before refilling is the 
responsibility of the person refilling. To clean container before final disposal, empty the 
remaining contents from this container into application equipment or mix tank. Fill the 
container about 10 percent full with water. Agitate vigorously or recirculate water with the 
pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection 
system. Repeat this rinsing procedure two more times. Then offer for recycling if available or 
puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures 
approved by state and local authorities. 
CONTAINER IS NOT SAFE FOR FOOD, FEED, OR DRINKING WATER. 
 
10.0 CONDITIONS OF SALE AND LIMITATION OF WARRANTY 
AND LIABILITY 
CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY 
NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation of 
Warranty and Liability before buying or using this pr oduct. If the terms are not 
acceptable, return the product at once, unopened, and the purchase price will be 
refunded. 
 
The Directions for Use of this product must be followed carefully. It is impossible to eliminate 
all risks inherently associated with the use of this product. Crop injury, ineffectiveness or 
other unintended consequences may result because of such factors as manner of use or 
application, weather or crop conditions, presence of other materials or other influencing 
factors in the use of the product, which are beyond the control of SYNGENTA CROP

61 
 
PROTECTION, LLC or Seller. To the extent permitted by applicable law, Buyer and User 
agree to hold SYNGENTA and Seller harmless for any claims relating to such factors. 
SYNGENTA warrants that this product conforms to the chemical description on the label and 
is reasonably fit for the purposes stated in the Directions for Use, subject to the inherent risks 
referred to above, when used in accordance with directions under normal use conditions. To 
the extent permitted by applicable law: (1) this warranty does not extend to the use of the 
product contrary to label instructions, or under conditions not reasonably foreseeable to or 
beyond the control of Seller or SYNGENTA, and (2) Buyer and User assume the risk of any 
such use. TO THE EXTENT PERMITTED BY APPLICABLE LAW, SYNGENTA MAKES NO 
WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE 
NOR ANY OTHER EXPRESS OR IMPLIED WARRANTY EXCEPT AS WARRANTED BY 
THIS LABEL. 
To the extent permitted by applicable law, in no event shall SYNGENTA be liable for any 
incidental, consequential or special damages resulting from the use or handling of this 
product. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THE EXCLUSIVE 
REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY OF SYNGENTA 
AND SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES 
(INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, CONTRACT, 
NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) RESULTING FROM THE 
USE OR HANDLING OF THIS PRODUCT, SHALL BE THE RETURN OF THE PURCHASE 
PRICE OF THE PRODUCT OR, AT THE ELECTION OF SYNGENTA OR SELLER, THE 
REPLACEMENT OF THE PRODUCT. 
SYNGENTA and Seller offer this product, and Buyer and User accept it, subject to the 
foregoing Conditions of Sale and Limitation of Warranty and Liability, which may not be 
modified except by written agreement signed by a duly authorized representative of 
SYNGENTA. 
11.0 APPENDIX 
11.1 Tank Mix Partner Table 
Product Name EPA Registration Number Active Ingredient(s) 
Basagran Herbicide 7969-45 Benzaton 
Classic Herbicide 5481-681 Chlorimuron ethyl 
Flexstar 100-1101 Fomesafen 
Gramoxone SL 3.0 100-1652 Paraquat 
Pursuit 241-310 Imazethapyr 
Reflex 100-993 Fomesafen 
Ultra Blazer 70506-60 Acifluorfen

62 
 
 
11.2 Rate Conversion Chart 
fl oz product/acre lb ai fluazifop/acre 
4 0.062 
6 0.094 
8 0.125 
10 0.156 
12 0.188 
16 0.250 
24 0.375 
30 0.469 
32 0.500 
48 0.750 
72 1.125 
 
11.3 SCIENTIFIC NAMES OF WEED SPECIES 
Common Name Scientific Name 
Barnyardgrass Echinochloa crus-galli 
Bentgrass Agrostis spp. 
Bermudagrass Cynodon dactylon 
Broadleaf signalgrass Brachiaria platyphylla 
Crabgrass, Large Digitaria sanguinalis 
Crabgrass, Smooth Digitaria ischaemum 
Crabgrass, Southern Digitaria ciliaris 
Crabgrass, Tropical Digitaria bicornis 
Downy brome Bromus tectorum 
Fall Panicum Panicum dichotomiflorum 
Field Sandbur Cenchrus incertus 
Foxtail, Giant Setaria faberi 
Foxtail, Green Setaria viridis 
Foxtail, Yellow Setaria pumila 
Goosegrass Eleusine indica 
Guineagrass, seedling Panicum maximum 
Italian Ryegrass Lolium multiflorum 
Itchgrass Rottboellia exaltata 
Johnsongrass, Rhizome Sorghum halepense 
Johnsongrass, Seedling Sorghum halepense 
Junglerice Echinochloa colonum 
Kikuyugrass Rennisetum clandestinum 
Prairie cupgrass Eriochloa contracta 
Quackgrass Elymus repens 
Rabbitfootgrass Polypogon monspeliensis 
Red Rice Oryza sativa 
Shattercane Sorghum bicolor 
Sorghum almum Sorghum almum 
Southern Sandbur Cenchrus echinatus 
Southwestern cupgrass Eriochloa gracilis 
Texas Panicum Panicum texanum 
Volunteer Barley Hordeum vulgare

63 
 
Volunteer Corn Zea mays 
Volunteer Milo Sorghum bicolor 
Volunteer Oats Avena sativa 
Volunteer Rye Secale cereale 
Volunteer Wheat Triticum aestivum 
Wild Proso Millet Panicum miliaceum 
Wild Oats Avena fatua 
Wirestem Muhly Muhlenbergia frondosa 
Witchgrass Panicum capillare 
Woolly cupgrass Eriochloa villosa 
 
Flexstar®, Fusilade®, Gramoxone® SL 3.0, Reflex®, the ALLIANCE FRAME, the 
SYNGENTA Logo, and the PURPOSE ICON are Trademarks of a Syngenta Group Company 
 
Roundup® and Roundup Ready® are trademarks of Monsanto Company 
 
Basagran®, IMI-Corn®, LibertyLink®, Pursuit®, and Pursuit® are registered trademarks of 
BASF 
 
Classic® is a trademark of AMVAC Chemical Corporation 
 
ULTRA BLAZER is a trademark of a UPL Corporation Limited Group Company 
 
Viton™ is a trademark of The Chemours Company FC, LLC 
 
©20XX Syngenta 
 
 
For non-emergency (e.g., current product information), call 
Syngenta Crop Protection at 1-866-796-4368. 
 
 
Manufactured for: 
Syngenta Crop Protection, LLC 
P.O. Box 18300 
Greensboro, North Carolina, 27419-8300 
 
Fusilade DX 1070 MAS 0625 AMEND 0825-CL – ep– 7-15-25 
000100-01070.20250820.FUSILADE_DX-AMEND-0825-CL