# 2,4-DB 200

- EPA Reg No: **1381-215**
- Registrant: WINFIELD SOLUTIONS, LLC
- Signal word: Danger
- Active ingredients: 2,4-DB, dimethylamine salt (25.9%)
- Label accepted: 2014-09-22
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/001381-00215-20140922.pdf

---
C
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY ' ^
WASHINGTON, DC 20460
OFFICE OF CHEMICAL SAFETY
AND POLLUTION PREVENTION
SEP 2 2 2014
Danielle Erding
Registration Specialist
Winfield Solutions, LLC
P.O. Box 64589
St. Paul, MN 55164-0589
Subject: Label Notification per PRN 98-10 - Adding MOA code and resistance
management language
Product Name: 2,4-DB 200
EPA Registration Number: 1381-215
Application Date: September 8, 2014
Decision Number: 495408
Dear Ms. Erding:
The Agency is in receipt of your Application for Pesticide Notification under Pesticide
Registration Notice (PRN) 98-10 for the above referenced product. The Registration Division
(RD) has conducted a review of this request for its applicability under PRN 98-10 and finds that
the action requested falls within the scope of PRN 98-10.
The label submitted with the application has been stamped "Notification" and will be placed in
our records. If you have any questions, you may contact Shanta Adeeb at 703-347-0502 or via
.email at adeeb.shanta@epa.gov.
Sincerely,
Kathryn Montague, Product Manager 23
Herbicide Branch
Registration Division (7505P)
Office of Pesticide Programs

Please read instructions on reverse before cof "ting form. Form Approved. /"" *3 No. 2070-0060. Approval expires 2-28-95
EPA
United States
Environmental Protection Agency
Washington, DC 20460
D Registration
n Amendment
El Other
OPP Identifier Number
Application for Pesticide -Section
1. Company/Product Number
1381-215
4. Company/Product (Name)
2,4-DB 200
2. EPA Product Manager
Kathryn Montague
PM#
23
3. Proposed Classification
E) None D Restricted
5. Name and Address of Applicant (Include ZIP Code)
Winfield Solutions, LLC
P.O. Box64589
St. Paul, MN 55 164-0589
D Check if this is a new address
6. Expedited Review. In accordance with FIFRA Section 3(c)(3)(b)(i), my
product is similar or identical in composition and labeling to:
EPA Reg. No,
Product Name:
Section II
D Amendment - Explain Below
D Resubmission in response to Agency letter dated
El Notification - Explain below
D Final printed labels in response to Agency letter dated
D "Me Too" Application
D Other - explain below
Explanation: Use additional page(s) if necessary. (For Section I and Section II). Notification of Addition of Resistance Management
Recommendations and MOA code to label, consistent with PR Notice 2001-5. and per PR Notice 98-10. I believe this notification is consistent with the
provisions of PR Notice 98-10 and EPA regulations at 40 CFR 152.46, and no other changes have been made to the labeling or the confidential
statement of formula of this product. I understand that it is a violation of 18 U.S.C. Sec. 1001 to willfully make any false statement to EPA. I further
understand that if this notification is not consistent with the terms of PR Notice 98-10 and 40 CFR 152.46, this product may be in violation of FIFRA and I
may be subject to enforcement action and penalties under section 12 and 14 of FIFRA.
Section I II
1 . Material This Product Will Be Packaged In:
Child-Resistant Packaging
D Yes*
El No
* Certification must besubmitted.
Unit Packaging
D Yes
El No
If "Yes," No. Per
Unit Package Wt. Container
Water Soluble Packaging
D Yes
El No
If "Yes,"
Package Wt.
No. Per
Container
2. Type of Container
El Metal
El Plastic
D Glass
D Paper
D Other (Specify).
3. Location of Net Contents Information
El Label D Container
4. Size(s) of Retail Container
1, 2.5, 30, 55 gallons
5. Location of Label Directions
El On Label
D On Labeling accompanying product
6. Manner In Which Label Is Affixed To Product D Lithograph
D Paper Glued
D Stenciled
El Other
Section IV
1 . Contact Point (Complete items directly below for identification of individual to be contacted, if necessary, to process this application) c
Name
Danielle Erding
Title
Registration Specialist
Telephone No. (Include Area Code) c
651-375-7228 t <•<""•* cc
Certification
I certify that the statements I have made on this form and all attachments thereto are true, accurate and complete.
I acknowledge that any knowingly false or misleading statement may be punishable by fine or imprisonment or both
under applicable law.
2. Signature
4. Typed Name
Danielle Erding
3. Title
Registration Specialist
5. Date
Septembers, 2014
6. D£tc Xpplicatiori ' J-
Received l l <- < .
c
- <- (Str.mped)
EPA Form 8570-1 (Rev. 12-90) Previous editions are obsolete. White - EPA File Copy (original) Yellow - Applicant Copy

P 651 -375-5205 P.O. BOX 64589, MS 5705, ST PAUL MN 55164
F 651-375-1158 SHIP TO 1080 COUNTY ROAD F WEST, MS 5705, SHOREVIEW MN 55126-2910
Septembers, 2014
Ms. Kathryn Montague, PM 23
Document Processing Desk (NOTIF)
Office of Pesticide Programs (7504P)
U.S. Environmental Protection Agency
1200 Pennsylvania Ave., NW
Washington, DC 20460-0001
Subject: EPA Reg. No. 1381-215, 2,4-DB 200
Notification of Label Amendment
Addition of Resistance Management Recommendation and MOA Code per PR Notice 2001-5
Dear Ms. Montague:
Enclosed are a Notification Application and five copies of amended labeling for the subject product. The labeling
incorporates an herbicide resistance management recommendation and MOA code, consistent with the guidance
provided in the Agency's PR Notice 2001-5.
Please note that one copy of the enclosed labeling has been highlighted (in yellow), to point out the revisions. No other
label changes are being made at this time.
If there are questions concerning the enclosed, please do not hesitate to contact me.
Sincerely,
Danielle Erding
Registration Specialist
deerding@landolakes.com
Enclosures
c cc c
c <-
c ooc
c c c
i. c cc c t c
c <- c t
t <c c
WINFIELD.COM WINFIELD SOLUTIONS, LLC
A LAND O'LAKES COMPANY

r Page 1 of 13
GROUP HERBICIDE
2,4-DB200
Broadleaf Herbicide
Controls Broadleaf Weeds in Soybeans, Peanuts, Seedling and Established Alfalfa,
and Seedling Birdsfoot Trefoil
ACTIVE INGREDIENT: 4-(2,4-dichlorophenoxy)butyric acid, dimethylamine salt* 25.9%
OTHER INGREDIENTS: 74.1%
TOTAL 100.0%
*4-(2,4-dichlorophenoxy)butyric acid equivalent 22.0% by weight or 2 pounds per gallon.
KEEP OUT OF REACH OF CHILDREN
DANGER/PELIGRO
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand
the label, find someone to explain it to you in detail.)
FIRST AID
IF IN EYES
IF SWALLOWED
IF ON SKIN OR CLOTHING
IF INHALED
Hold eye open and rinse slowly and gently with water for 1 5-20 minutes.
Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye.
Call a poison control center or doctor for treatment advice
Call poison control center or doctor immediately for treatment advice.
Have person sip a glass of water if able to swallow.
Do not induce vomiting unless told to do so by the poison control center or doctor.
Do not give anything by mouth to an unconscious person.
Take off contaminated clothing.
Rinse skin immediately with plenty of water for 15-20 minutes.
Call a poison control center or doctor for treatment advice.
Move person to fresh air.
If person is not breathing, call 911 or an ambulance, then give artificial
preferably by mouth-to-mouth, if possible.
• Call a poison control center or doctor for further treatment advice.
respiration,
HOT LINE NUMBER
Have the product container or label with you when calling a poison control center or doctor or going for treatment. For additional
information in case of medical emergency call toll free 1 -877-424-7452.
NOTE TO PHYSICIAN
Probable mucosal damage may contraindicate the use of gastric lavage.
See booklet for additional PRECAUTIONARY STATEMENTS, COMPLETE DIRECTIONS FOR USE, WARRANTY
DISCLAIMER AND LIMITATION OF LIABILITY.
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
DANGER: Corrosive. Causes irreversible eye damage. Harmful if swallowed. Do not get in eyes or on clothing. Avoid CGQtact
with skin. t: C C c c L
EPA Reg. No. 1381-215
Distributed By
Winfield Solutions, LLC
P.O. Box 64589, St. Paul, WIN 55164-0589
WlNFlELD
<~ I- L c C C
EPA Est. No. 42750-MO-1
NET CONTENTS J3ALS
LOT NO. ,.
1 /03Q5/3 1/09084- *- *• *- c c
AgrisoiutioNS

r Page 2 of 13
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Some materials that are chemical-resistant to this product are made of any waterproof material. If you want more options, follow the
instructions for category A on the EPA chemical-resistance category selection chart.
All mixers, loaders, applicators, and other handlers must wear:
-long sleeved shirt and long pants,
-shoes and socks,
-chemical resistant gloves,
-goggles or face shield, and
-chemical-resistant apron when mixing, loading, cleaning up spills, cleaning equipment, or otherwise exposed to the concentrate.
See engineering controls for additional requirements.
USER SAFETY REQUIREMENTS
Follow manufacturer's instructions for cleaning /maintaining PPE. If no such instructions for washables exist, use detergent and hot
water. Keep and wash PPE separately from other laundry. Discard clothing and other absorbent materials that have been
drenched or heavily contaminated with this product's concentrate. Do not reuse them.
ENGINEERING CONTROL STATEMENTS
Pilots must use an enclosed cockpit that meets the requirements listed in the WPS for agricultural pesticides [40 CFR
170.240(d)(6)]. Pilots must wear the PPE required on this labeling for applicators.
When handlers use closed systems, enclosed cabs or aircraft in a manner that meets the requirements listed in the Worker
Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d) (4-6)], the handler PPE requirements may be reduced or
modified as specified in the WPS.
USER SAFETY RECOMMENDATIONS
Users should wash hands before eating, drinking, chewing gum, using tobacco or using the toilet.
Users should remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
Users should remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as
possible, wash thoroughly and change into clean clothing.
ENVIRONMENTAL HAZARDS
This product is toxic to fish. Do not apply directly to water, to areas where surface water is present, or to intertidal areas below the
mean high water mark. Drift and runoff from treated areas may be hazardous to aquatic organisms in neighboring areas. Do not
contaminate water when disposing of equipment wash waters. Do not contaminate water intended for irrigation or domestic
purposes. Do not apply when weather conditions favor drift from target area.
Groundwater Contamination: Most cases of ground water contamination involving phenoxy herbicides such as 2,4-DB have been
associated with mixing/loading and disposal sites. Caution should be exercised when handling 2,4-DB pesticides at such sites to
prevent contamination of ground water supplies. Use of closed systems for mixing or transferring this pesticide will reduce the
probability of spills. Placement of the mixing/loading equipment on an impervious pad to contain spills will help prevent ground
water contamination.
This chemical has properties and characteristics associated with chemicals detected in groundwater. The use of this chemical in
areas where soils are permeable, particularly where the water table is shallow, may result in groundwater contamination.
Application around a cistern or well may result in contamination of drinking water or groundwater.
Do not apply 2,4-DB 200 directly to or otherwise permit it to come in contact with cotton, okra, grapes, tomatoes, fruit trees,
vegetables, flowers, or other desirable crop or ornamental plants. Do not permit spray mist to drift onto susceptible plants since
very small quantities of the 2,4-DB 200 can cause severe injury during the growing or dormant periods. Use coarse sprays to
minimize drift. Do not apply with nozzles that produce fine spray droplets.
Drift from ground application may be reduced by: (1) keeping the spray boom as near to the crop as possible in order to obtcin
complete coverage; (2) by applying 10 gallons or more of spray per acre; (3) by using no more than 20 pounds of pressure <3t-thpc
nozzle tips; and (4) by not spraying when wind exceeds 5 miles per hour. c L c
Drift from aerial application may be reduced by: (1) applying as near to the target as possible to obtain adequate coverage'; &)&f
applying 5 or more gallons of spray per acre; (3) by using 20 pounds pressure or less at the nozzle tips; (4) by using nozzles which
produce a coarse spray pattern; (5) by spraying when there is no possibility for a temperature inversion at time of spraying.
Applications by aircraft, ground rig and hand sprayers should be carried out only when there is no hazard from spray drift. £ ° c c ° <=
DIRECTIONS FOR USE
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.
Read entire label before using this product. L t C
I.
t. C (. L
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers
may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for
pesticide regulations.

Page 3 of 13
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This standard
contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of
agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also
contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE)
and restricted-entry intervals. The requirements in this box only apply to uses of this product that are covered by the Worker
Protection Standard.
Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 48 hours.
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with
anything that has been treated such as plants, soil or water is coveralls, chemical resistant gloves, made of any waterproof
material, shoes plus socks and protective eyewear.
STORAGE AND DISPOSAL
Do not contaminate water, food or feed by storage or disposal.
PESTICIDE STORAGE
Store in original container in a dry secured storage area. Keep container tightly closed when not in use.
PESTICIDE DISPOSAL
Pesticide wastes are acutely hazardous. Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of Federal '
law. If these wastes cannot be disposed of by use according to label instructions, contact your State Pesticide or Environmental
Control Agency, or the Hazardous Waste representative at the nearest EPA Regional Office for guidance.
CONTAINER DISPOSAL: Use label language appropriate for container size and type.
Nonrefillable containers. Do not reuse or refill this container. Clean container promptly after emptying.
Nonrefillable container equal to or less than 5 gallons. Triple rinse as follows: Empty the remaining contents into application
equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container % full with water and recap.
Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10
seconds after the flow begins to drip. Repeat this procedure two more times. Then offer for recycling or reconditioning, or puncture
and dispose of in a sanitary landfill, or by incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of
smoke.
Nonrefillable container greater than 5 gallons. Triple rinse as follows: Empty the remaining contents into application equipment
or a mix tank. Fill the container % full with water. Replace and tighten closures. Tip container on its side and roll it back and forth,
ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times.
Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into application equipment or a
mix tank or store rinsate for later use or disposal. Repeat this procedure two more times. Then offer for recycling or reconditioning,
or puncture and dispose of in a sanitary landfill, or by incineration, or, if allowed by state and local authorities, by burning. If burned,
stay out of smoke.
Refillable container. Refill this container with pesticide only. Do not reuse this container for any other purpose. Cleaning the
container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the
responsibility of the refiller. To clean the container before final disposal, empty the remaining contents from this container into
application equipment or mix tank. Fill the container about 10 percent full with water. Agitate vigorously or recirculate water with
the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing
procedure two more times. Then offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill, or by
incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of smoke.
FOR CHEMICAL EMERGENCY: Spill, leak, fire, exposure, or accident, call
CHEMTREC 1-800-424-9300
CAUTIONS AND RESTRICTIONS
Do not apply 2,4-DB 200 through any type of irrigation system.
Do not use in or near a greenhouse. L L I. (,
Do not feed/graze soybean forage or harvest hay for 60 days following any 2,4-DB 200 application. l, , , t L
APPLICATION PROCEDURES i c c
2,4-DB 200 can be applied to registered use areas by ground and aerial application equipment. The following ip!rpyides
recommended methods of application for each crop. c
GROUND APPLICATION .. L
Use a standard herbicide boom sprayer that provides uniform and accurate application. Sprayer should be equipped wch' screens
no finer than 50 mesh in the nozzle tips and in-line strainers. c <. i t
Select a spray volume and delivery system that will ensure thorough and uniform spray coverage. For optimum spray cK.striDuJjon
and thorough coverage, use of flat fan nozzles (maximum tip size 8008) with a minimum spray pressure of 30 psi at the nozzle tips
are recommended. Where the potential for drift is a problem, see the "Environmental Hazards" section for recommendations to
reduce drift. Other nozzle types that produce course spray droplets may not provide adequate coverage of the weedG'ie or.r.ure
optimum control. Raindrop nozzles are not recommended as weed control with 2,4-DB 200 may be reduced. In general a
minimum spray volume of 10 gallons per acre (GPA) is recommended for optimum spray coverage. When using highw'-speed
equipment, a maximum speed of 10 mph is suggested if field conditions cause excessive boom movement during appiiu-lbn and
subsequent poor spray coverage. Ground applications made when dry, dusty field conditions exist may provide reduced weed
control in wheel track areas.

( r Page 4 of 13 //
AERIAL APPLICATION
Use orifice discs, cores and nozzle types and arrangements that will provide for optimum spray distribution and maximum
coverage. In general a minimum spray volume of 5 GPA and a maximum pressure of 40 psi are recommended. Where the
potential for drift is a problem, see the "Environmental Hazards" section for recommendations to reduce drift.
SPRAY DRIFT MANAGEMENT
Avoiding spray drift at the application site is the responsibility of the applicator. The interaction of many equipment- and weather-
related factors determine the potential for spray drift. The applicator and the grower are responsible for considering all these
factors when making decisions.
Apply only as a medium or coarser spray (ASAE standard 572) or a volume mean diameter of 300 microns or greater for spinning
atomizer nozzles.
Apply only when the wind speed is 2-10 mph at the application site.
Additional requirements for aerial applications:
The boom length must not exceed 75% of the wingspan or 90% of the rotor blade diameter.
Release spray at the lowest height consistent with efficacy and flight safety. Do not release spray at a height greater than 10 feet
above the crop canopy.
When applications are made with a crosswind, the swath will be displaced downwind. The applicator must compensate for this
displacement at the downwind edge of the application area by adjusting the path of the aircraft upwind.
Do not make applications into temperature inversions.
Additional requirements for ground boom application:
Do not apply with a nozzle height greater than 4 feet above the crop canopy.
MIXING INSTRUCTIONS
2,4-DB 200 ALONE: Fill the spray tank 1/2 to 3/4 full with clean water. Begin agitation and add the recommended amount of 2,4-
DB 200. Add water to the spray tank to the desired level. Maintain sufficient agitation to ensure a uniform spray mixture during
application.
TANK MIXTURES: 2,4-DB 200 can be applied in tank mixture with other herbicides registered for use on approved crops. Refer to
the specific crop section for rate directions and other restrictions. To apply 2,4-DB 200 in mixture with another product, fill the
spray tank 1/2 to 3/4 full with clean water and begin agitation. If tankmixing with wettable powder, soluble powder, flowable or dry
flowable products, add the powder or flowable product first. After the other herbicide is thoroughly mixed with water, add the
recommended amount of 2,4-DB 200 and add water to the spray tank to the desired level. If tankmixing with other product types,
add the 2,4-DB 200 first before adding the other product. Always mix one product in water thoroughly before adding another
product or compatibility problems may occur. Never mix two products together without first mixing in water.
Maintain sufficient agitation while mixing and during application to ensure a uniform spray mixture. If spray mixture is allowed to
remain without agitation for short periods of time, be sure to agitate until uniformly mixed before application.
COMPATIBILITY
Evaluate tank mixtures not listed on this label for compatibility and crop safety on a small area before applying to the entire field.
2,4-DB 200 Broadleaf Herbicide may form an insoluble precipitate in very hard water. If you expect'to mix 2,4-DB 200 with very
hard water, test compatibility by mixing a small amount of 2,4-DB 200 in the proposed dilution ratios, shake and observe. A
compatibility agent approved for use on growing crops such as Complete Compatibility or E-Z MIX may be tested to reduce
precipitation. Whenever hard water is used to dilute 2,4-DB 200, spray immediately and do not allow spray mixture to sit overnight.
RESISTANCE MANAGEMENT RECOMMENDATIONS
2,4-DB 200 is a Group 4 herbicide. Any weed population may contain or develop plants naturally resistant to 2,4-DB 200 artdcd[r'i'erc
Group 4 herbicides. Weed species with acquired resistance to Group 4 may eventually dominate the weed population if Group '4C c
herbicides are used repeatedly in the same field or in successive years as the primary method of control for targeted species. Tfe
may result in partial or total loss of control of those species by 2,4-DB 200 or other Group 4 herbicides. c
<- c c. c
To delay herbicide resistance consider:
• Avoiding the consecutive use of 2,4-DB 200 or other target site of action Group 4 herbicides that have a similar targa* ci'3;C.f
action, on the same weed species. *"
• Using tank-mixtures or premixes with herbicides from different target site of action Groups as long as the involvedjiiooycts
are all registered for the same use, have different sites of action, and are both effective at the tank mix or prepack rate on trio
weed(s) of concern. L
• Basing herbicide use on a comprehensive IPM program. c t
• Monitoring treated weed populations for loss of field efficacy. c c '•c l c
• Contacting your local extension specialist, certified crop advisors, and/or Winfield Solutions, LLC representative for herbicide
resistance management and/or integrated weed management recommendations for specific crops and resistant weed
biotypes. ' L c c L

Page 5 of 13
PRODUCT INFORMATION
Spray tank residues of 2,4-D or MCPA mixed with 2,4-DB 200 can cause serious crop or ornamental plant injury. A sprayer
previously used to apply these chemicals must be thoroughly cleaned with alkali and water before applying 2,4-DB 200. Be sure
sprayer is clean before applying 2,4-DB 200.
Local conditions may affect the use of herbicides. Consult your State Agricultural Experiment Station, Farm Advisors, or Extension
Weed Specialists for advice in selecting treatments from this label to best fit local conditions.
INJURY TO CROPS FROM THIS HERBICIDE MAY OCCUR. IF YOU ARE NOT PREPARED TO ACCEPT SOME DEGREE OF
CROP INJURY, DO NOT USE THIS PRODUCT..
Crop varieties vary in response to 2,4-DB and some are easily injured. Apply 2,4-DB 200 only to varieties known to be tolerant to
2,4-DB. If you are uncertain concerning tolerant varieties or local use situations that may affect crop tolerance to 2,4-DB, consult
your seed company, state Agricultural Extension Service or qualified crop consultant for advice.
Be sure that use of this product conforms to all applicable laws, rules, and regulations. Certain states have restrictions pertaining
to application distances from susceptible crops. The applicator should become familiar with these laws, rules, or regulations and
follow them exactly.
WEED LIST
2,4-DB 200 Broadleaf Herbicide alone will control or suppress the following weeds depending on weed size.
COMMON NAME
velvetleaf
Virginia copperleaf
prickly sida (teaweed)
common ragweed
threeseed croton (goatweed)
lambsquarters
wild mustard
field pennycress
jimsonweed
devilsclaw
pigweed
morningglory
cocklebur
curled dock
Russian thistle
yellow rocket
smartweed
sicklepod**
BOTANICAL NAME
Abutilon theophrasti
Acalypha virginica
Sida spinosa
Ambrosia artemisiifolia
Croton lindheimeranus
Chenopodium album
Sinapsis arvensis
Thlaspi arvense
Datura stramonium
Proboscidea louisianica
Amaranthus spp.
Ipomoea spp.
Xanthium spp.
Rumex crispus
Salsola kali
Barbarea vulgaris
Polygonum spp.
Cassia obtusifolia (L)
MAXIMUM WEED HEIGHT*
1 inch
1 inch
1 inch
1 inch
1 inch
1 inch
1 inch
1 inch
1.5 inches
2 inches
3 inches
36 inches
36 inches
3 inches
3 inches
3 inches
3 inches
2 inches
*Growth of larger weeds will be only suppressed.
"Sicklepod may only be partially controlled. Repeat applications of 2,4-DB 200 may be necessary for control.
SOYBEANS
2,4-DB 200 Broadleaf Herbicide Directions
PRODUCT
Preplan! through
pre-emergence
2,4-DB 200
+
Non-ionic surfactant
RATE
0.7 - 0.9 pint/A
+
0.5% V/V
APPLICATION TIMING AND SPECIFIC COMMENTS
CROP
Apply to soybeans before
planting or before crop
emergence.
WEEDS
For control of emerged
cocklebur, annual
morningglories and other
susceptible broadleaf weeds,
apply when weeds are small
and actively growing (see
WEED LIST). 2,4-DB 200
may not give complete
control of larger overwintered
mustards. . Best results will
be achieved by adding a
non-ionic surfactant at a
0.5% V/V to the spray tank
when making a preplant or
preemergence application of
2,4-DB 200.

Page 6 of 13
SOYBEANS
2,4-DB 200 Broadleaf Herbicide Directions
PRODUCT RATE
APPLICATION TIMING AND SPECIFIC COMMENTS
CROP WEEDS
Postemergence broadcast
(over the top)
2,4-DB 200
Pre-bloom: 0.73 pint/A
Bloom: 0.89 pint/A
Apply to soybeans grown in
the Southern states only from
7 to 10 days before bloom up
to mid-bloom when soybeans
are about knee-high and
growing actively. Soybean
foliage should be dark green
indicating that nodulation and
nitrification are under way.
Postemergence broadcast
application at these rates
prior to or after this
application timing is not to be
used as reduced flowering
and yield may result. DO
NOT APPLY 2,4-DB 200
Postemergence broadcast to
soybeans grown in the
Midwest states of IA, IL, IN,
KS, KY (except the Purchase
area), MO (except the MO
bootheel), Ml, MN, NE, ND,
OH, SD and Wl.
For control of emerged
cocklebur, annual
morningglories and other
susceptible broadleaf weeds,
apply when weeds are small
and actively growing (see
WEED LIST).
Postemergence directed band
2,4-DB 200 0.7-1.6 pints/A
Apply when soybeans are 8
or more inches tall with
sprayer nozzles mounted to
insure proper placement of
spray on only the lower 1/3 of
the soybean plants. Do not
allow spray to contact
growing terminals of beans as
excessive crop injury will
result.
Do not mount nozzles on
booms with drop pipes or on
cultivators without gauge
wheels. Use flat fan type
nozzles, 8001 or larger or the
equivalent with nozzle
pressure less than 30 psi and
at least 10 gallons of spray
volume per acre.
To control emerged
cockleburs and annual
morningglories up to 3 inches
tall, apply 0.7 to 0.9 pint/A per
broadcast acre as a directed
band treatment. To control
other susceptible broadleaf
weeds up to 1 inch tall, apply
1.4 to 1.6 pints per broadcast
acre as a directed band
treatment. Apply no more
than 2 higher rate applications
per season to reduce the
potential for crop stunting.
TANK MIXTURES OF 2,4-DB 200 broadleaf herbicide AND OTHER HERBICIDES IN SOYBEANS
Applying tank mixtures of 2,4-DB 200 Broadleaf Herbicide with other soybean herbicides as directed below can reduce competition
from early weed populations and can improve weed control or control mid-to-late-season weed populations, thus minimizing the
likelihood of yield reduction in soybean fields with heavy broadleaf weed infestations. However, treating soybeans under stress (as
from drought or disease such as Phytophthora root rot) or in any other manner not directed on this label, can cause crop injury and
yield reduction. The advantage of treating weeds with an appropriate tank mixture should be balanced against any potential for
loss. Follow the local recommendations of your- state, Cooperative Extension Service, or other agricultural weed control authority.
Always follow the recommendations of any product used in tank mixture with 2,4-DB 200 Broadleaf Herbicide.

Page 7 of 13 Vfe
1
PRODUCT
2,4-DB 200
+
Gramoxone® Extra
+
Nonionic surfactant
2,4-DB 200
+
Prowl®
+
Nonionic surfactant
2,4-DB 200
+
Roundup® or Honcho®
+
Nonionic surfactant
2,4-DB 200
+
Pursuit® Plus
+
Nonionic surfactant
2,4-DB 200
+
Scepter®or Scepter 70DG
+
Nonionic surfactant
RATE
0.5 - 0.75 pint/A
+
1.5-5 pints/A
+
0.5% V/V
0.7 - 0.9 pint/A
+
1.0-3.0 pints/A
+
0.5% MN
0.5 - 0.75 pint/A
+
1 - 1.5 pints/A
+
0.5 - 1 .0% VAX
0.5 - 0.75 pint/A
+
2.5 pints/A
+
0.25% V/V
0.5 - 0.75 pint/A
+
0.66 pint/A
or
2.8 oz./A
+
0.25% V/V
APPLICATION TIMING AND SPECIFIC COMMENTS
CROP
Apply before planting or
before soybean emergence.
Do not apply this tank mixture
after crop emergence.
Apply up to 45 days prior to
soybean planting. Do not
apply a 2,4-DB 200 + Prowl
tank mixture at or after
planting North of Interstate
80. Surface applications of
Prowl tank mixtures North of
Interstate 80 require at least 1
inch rainfall or mechanical
incorporation prior to planting
or crop injury may result. Do
not apply this tank mixture
after crop emergence.
Apply before planting or
before soybean emergence.
Do not apply this tank mixture
after crop emergence.
Apply before planting or
before soybean emergence.
Do not apply this tank mixture
after crop emergence.
Apply before planting or
before soybean emergence.
Do not apply this tank mixture
after crop emergence.
WEEDS
For improved control of
emerged annual
morningglory, common
cocklebur, marestail and
other problem weeds, apply
to small actively growing
weeds. Refer to the
Gramoxone® Extra label for
full list of weed species
controlled and specific
application stage and rate
directions.
For control of emerged
cocklebur, annual morning-
glories and other susceptible
broadleaf weeds, apply when
broadleaf weeds are actively
growing and small (see
WEED LIST). 2,4-DB 200
mixtures may not give
complete control of larger
overwintered mustards. Best
results will be achieved by
adding a non-ionic surfactant
to the spray tank when
making a preplant appli-
cation.
For improved control of
emerged annual morning-
glories, common cocklebur
and other problem weeds,
apply to small actively
growing weeds. Refer to the
Roundup or Honcho labels
for specific rate directions,
application stage and weed
species controlled.
For improved control of
emerged mustards, field
pennycress and other
problem weeds, apply when
broadleaf weeds are actively
growing and small (see
WEED LIST).
For improved control of
emerged mustards, field
pennycress and other
problem weeds, apply when
broadleaf weeds are actively
growing and small (see
WEED LIST).

PageS of 13
TANK MIXTURES OF 2,4-DB 200 AND OTHER HERBICIDES IN SOYBEANS
PRODUCT
2,4-DB 200
+
Squadron®
+
Nonionic surfactant
2,4-DB 200
+
Basagran®
2,4-DB 200
+
Blazer®
2,4-DB 200
Reflex®
2,4-DB 200
Lorox®
RATE
0.5 - 0.75 pint/A
+
3 pints/A
+
0.25% V/V
2 f I oz/A
+
1.5 -2 pints/A
2 fl oz/A
+
1.5 -2 pints/A
2 - 3 fl oz/A
+
1-1 1/2 pints/A
0.8 pint/A
+
1 pint/A
APPLICATION TIMING AND SPECIFIC COMMENTS
CROP
Apply before planting or
before soybean emergence.
Do not apply this tank mixture
after crop emergence.
Apply postemergence to
soybeans. Under certain
conditions soybean foliage
may burn, crinkle and bronze
following application.
Apply postemergence to
soybeans. Under certain
conditions, soybean foliage
may burn, crinkle and bronze
following application.
Soybean yield may be
reduced. Do not add
surfactant or crop oil to this
mixture as increased crop
injury may result.
Apply postemergence to
soybeans. Under certain
conditions bronzing, crinkling
or spotting of soybean foliage
may occur.
Apply to soybeans as a
directed band treatment only
when soybeans are at least 8
inches high. Do not spray
higher than 3 inches on the
soybean stem or
unacceptable crop injury may
result. Do not spray over the
top of soybean plants.
WEEDS
For improved control of
emerged mustards, field
pennycress and other
problem weeds, apply when
broadleaf weeds are actively
growing and small (see
WEED LIST).
To improve control of annual
morningglories, apply to
morningglory vines up to 6
inches long in the Southern
states of AL, AR, FL, GA,
LA, MS, NC, OK, SC, TN, TX
and VA or a maximum of 10
inches long in all other
states.
To improve control of larger
morningglories, cockleburs,
common ragweed, jimson-
weed and pigweed, apply
when weeds are actively
growing and before they are
12 inches tall or long.
For improved control of
annual morningglories, giant
ragweed and cocklebur,
apply to actively growing
weeds in the seedling stage
of growth.
For postemergence control of
annual morningglories, sic-
klepod, teaweed, cocklebur
and sesbania, apply when
weeds do not exceed 4
inches in height. A second
application may be neces-
sary, but do not make more
than 2 applications per
season.

r Page 9 of 13 %TANK MIXTURES OF 2,4-DB 200 AND'OTHER HERBICIDES IN SOYBEANS
PRODUCT
2,4-DB 200
+
Sencor® DF
2,4-DB 200
+
Pursuit
2,4-DB 200
+
Classic®
2,4-DB 200
+
Scepter® O.T.
+
Nonionic surfactant
RATE
0.9 pint/A
+
0.33 - 0.66 Ib/A
2 - 3 fl oz/A
+
4 f I oz/A
1 -2'floz/A
+
1/2 oz/A
1 - 2 f I oz/A
+
1 .0 pint/A
+
0.25% v/v
APPLICATION TIMING AND SPECIFIC COMMENTS
CROP
Apply to soybeans as a
directed band treatment only
when soybeans are at least 8
inches high, with spray or
nozzles mounted to insure
proper placement of spray on
no more than the lower 1/3 of
the soybean plants. Do not
apply directly to soybean
plants or serious crop injury
will occur. Soybean leaves
contacted by spray will be
killed. Follow all variety
restrictions on the full
Sencor® DF label.
Apply postemergence to
soybeans. Apply anytime
after soybean emergence but
no later than 85 days before
soybean harvest.
Apply postemergence to
soybeans. Apply after first
trifoliate has opened but no
later than 60 days before
soybean maturity.
Apply postemergence to
soybeans. Apply anytime
after soybean emergence but
no later than 90 days before
soybean harvest.
WEEDS
For improved control of
cocklebur, annual morning-
glories and other broadleaf
weeds, apply before weeds
are 3 inches tall. A nonionic
surfactant may be added to
improve broadleaf weed
control.
To improve control of
morningglories, common
ragweed, and giant ragweed.
See Pursuit label for weeds
controlled, and use
precautions.
Provides improved control of
most annual broadleaf
weeds, including morning-
glories, and common lambs-
quarters, compared to
Classic alone. See Classic
label for weeds controlled
and precautions.
Provides improved control of
morningglories compared to
Scepter O.T. alone. Check
Scepter O.T. label for weeds
controlled and precautions.
RESTRICTIONS AND LIMITATIONS FOR USE ON SOYBEANS
Maximum single application rate for pre-plant through pre-emergence applications is 0.9 pint (0.225 Ib ae) per acre.
Maximum single application rate for pre-bloom applications is 0.73 pint (0.182 Ib ae) acre.
Maximum single application rate for applications made after bloom is 0.89 pint (0.222 Ib ae) per acre.
Maximum single application rate for post-emergence applications through directed spray (band sprayer, low pressure ground
sprayer) is 1.6 pints (0.4 Ib ae) per acre.
Maximum single application rate for post-emergence applications through band treatment (sprayer) is 0.9 pint (0.225 Ib ae) per
acre.
Maximum of 2 post-emergence applications per year.
Beans stressed by drought or other influences should not be sprayed.
Do not use this product on soybeans that show symptoms of disease such as Phytophthora root rot.
Do not graze or feed soybean hay within 60 days after application of 2,4-DB 200 Broadleaf Herbicide tank mix application.
Do not harvest soybeans within 60 days after spray application.
Do not treat soybeans with a tank mixture of 2,4-DB 200 and SEVIN® Carbaryl Insecticide as severe injury may result.
When preplant through preemergence treatment is followed with a 2,4-DB 200 postemergence application, the cumulative rate
should not exceed 1.6 pints per acre per season.
Follow all restrictions and limitations of any product used in tank mixture with 2,4-DB 200.
Do not use 2,4-DB 200 alone or in tank mixture as a preplant through preemergence application to soybeans in California.

r Page 10 of 13
PEANUTS
2,4-DB 200 Broadleaf Herbicide Directions
PRODUCT
2,4-DB 200
2,4-DB 200
RATE
0.8- 1.0 pint/A
0.8- 1.6 pints/A
APPLICATION TIMING AND SPECIFIC COMMENTS
CROP
Apply to peanuts 2 to 12 weeks
after planting in the states of
AL, AR, FL, GA, LA, NC, MS,
SC, TN and VA.
Do not apply to peanuts within
60 days of harvest.
Apply to peanuts 2 to 12 weeks
after planting in the states of
OK, TX and NM only. Do not
apply later than 100 days after
planting or 60 days before
harvest.
WEEDS
For control of annual
morningglories, cocklebur and
other broadleaf weeds, apply
when these weeds are small
and actively growing (see
WEED LIST). A second
application may be made for
late germinating cocklebur and
morningglories.
For control of annual
morningglories and cocklebur,
apply 0.8 - 1 .0 pint/A of 2,4-DB
200 when these weeds are
actively growing and before
they are 3 inches tall. For
optimum control of other
susceptible broadleaf weeds
(see WEED LIST), apply 2,4-
DB 200 at 1.6 pints/A. For
optimum prickly sida
suppression, make a second
application 14 days later.
TANK MIXTURES OF 2,4-DB 200 BROADLEAF HERBICIDE AND OTHER HERBICIDES IN PEANUTS
PRODUCT
2,4-DB 200
+
Pursuit
+
Nonionic surfactant
2,4-DB 200
+
Classic
4-
Nonionic surfactant
2,4-DB 200
+
Starfire®
RATE
0.8 -1.6 pints/A
+
2 - 4 fl oz/A
+
0.25% VA/
0.8 pints/A
+
1/2 oz/A
+
0.25% VA/
0.5 - 1 .0 pint/A
+
1 1 fl oz/A
APPLICATION TIMING AND SPECIFIC COMMENTS
CROP
Apply postemergence to
peanuts. Follow restrictions
listed above depending on the
state.
Apply postemergence not
less than 60 days after
peanuts emerge to within 60
days of peanut harvest. See
Classic label for additional
restrictions and precautions.
Apply at ground crack. A
second application may be
made up to 28 days after
ground crack.
WEEDS
Will provide enhanced
control of morningglories,
prickly sida, common and
giant ragweed and
suppression of 1" tall
sicklepod.
For late season control of
Florida beggarweed, plus
morningglories,
lambsquarters, and other
weeds on the 2,4-DB 200
label.
Controls or suppresses many
annual weeds < 6" tall, and
provides improved control of
cocklebur, sicklepod, and
morningglory compared to
Starfire alone.
RESTRICTIONS AND LIMITATIONS FOR USE ON PEANUTS
Maximum single application rate for spray (aircraft, boom sprayer) is 1 pint/A (0.25 Ib ae/A).
Maximum single application rate for broadcast (aircraft, boom sprayer) is 1.6 pints/A (0.4 Ib ae/A).
Maximum two applications per year.
Do not apply to peanuts within 60 days of harvest.
Do not feed treated peanut vines or peanut hay to livestock.
Do not apply 2,4-DB 200 Broadleaf Herbicide if peanut plants are under stress from drought as injury may occur.

r Page 11 of 13
'it.FORAGE LEGUMES
(SEEDLING AND ESTABLISHED ALFALFA, SEEDLING BIRDSFOOT TREFOIL)
2,4-DB 200 Broadleaf Herbicide Directions
PRODUCT
2,4-DB 200
RATE
1-3 quarts/A
APPLICATION TIMING AND SPECIFIC COMMENTS
CROP
Apply . postemergence to
seedling forage legumes and
seedling or established
alfalfa. Forage legumes
should be healthy and
actively growing for greatest
selectivity. In established
alfalfa, twisting of stems and
malformation of leaves may
occur. Under most conditions
this response is usually
outgrown. A non-ionic
surfactant at 0.25% V/V may
be included in seedling alfalfa
grown in dry, low humidity
areas only. Non-ionic
surfactant may cause some
twisting of stems and
malformation of leaves. This
response is usually outgrown
under most conditions.
WEEDS
For control of emerged
lambsquarters, pigweed, field
pennycress, wild mustard,
common ragweed,
cocklebur, yellow rocket,
Russian thistle and annual
morningglory species less
than 1 inch high, apply 2,4-
DB 200 at 1 to 2 quarts/A.
For control of these weeds
up to 3 inches tall, apply 2,4-
DB 200 at 2-3 quarts/A.
Use the higher rates in dry,
low humidity growing areas.
For control or suppression of
smartweed and curled dock
up to 3 inches tall, apply 2,4-
DB 200 at 3 quarts/A.
In seedling alfalfa only, the
addition of an non-ionic
surfactant at 0.25% V/V may
improve broadleaf weed
control under dry, low
humidity conditions. 2,4-DB
200 may not adequately
control overwintered
broadleaf weeds including
field pennycress and
mustards.
FORAGE LEGUMES
(SEEDLING AND ESTABLISHED ALFALFA ONLY)
2,4-DB 200 Broadleaf Herbicide Tank Mixture Directions
PRODUCT RATE
APPLICATION TIMING AND SPECIFIC COMMENTS
CROP WEEDS
2,4-DB 200
®Poasf
Crop Oil Concentrate
1 - 3 quarts
+
1 - 2.5 pints
' +
2 pints/A
Apply this tank mix
postemergence to seedling
and established alfalfa only.
Alfalfa should be healthy and
actively growing for greatest
crop tolerance. Established
alfalfa is less tolerant to 2,4-
DB 200 than in the seedling
stage of growth. Some
yellowing and burning of
alfalfa foliage, stem and leaf
malformation may occur with
this tank mixture. Alfalfa will
generally outgrow this
response. Balance the
severity of your grass and
broadleaf weed problem with
the potential for crop injury.
Do not add non-ionic
surfactant, Dash®, UAN
solution or ammonium sulfate
to this tank mixture.
For control of emerged
susceptible broadleaf and
grass weed that are actively
growing, refer to the 2,4-DB
200 forage legume directions
above and the Poast label for
weeds controlled and
application timing for full use
directions.

f Page 12 of 13
FORAGE LEGUMES
(SEEDLING ALFALFA ONLY)
2,4-DB 200 Broadleaf Herbicide Tank Mixture Directions
PRODUCT
2,4-DB 200
+
BUCTRIL
RATE
1 quart/A
+
1 pint/A
APPLICATION TIMING AND SPECIFIC COMMENTS
CROP
Apply in the fall or spring to
seedling alfalfa when the
majority of the field has a
minimum of 4 trifoliate leaves.
This tank mixture may result
in unacceptable crop leaf
burn, especially under warm,
humid weather conditions.
See 2,4-DB 200 label for
additional precautions and
restrictions. Do not use this
tank mix on established
alfalfa.
WEEDS
This tank mix provides
improved control of pigweed,
kochia and tansy mustard
compared to 2,4-DB 200 or
BUCTRIL alone. Apply when
weeds do not exceed the 4-
leaf stage, 2 inches in height
or 1 inch in diameter,
whichever comes first. 2,4-
DB 200 + BUCTRIL tank
mixtures will not adequately
control overwintered
pennycress, henbit and
mustards.
RESTRICTIONS AND LIMITATIONS FOR USE ON FORAGE LEGUMES
Maximum single application rate of 3 quarts/A (1.5 Ib ae/A).
Do not graze established alfalfa or feed straw or hay from treated established alfalfa to livestock within 30-60 days after application.
Do not graze or feed seedling alfalfa, or seedling birdsfoot trefoil within 30-60 days after application.
Do not use on clover, peas or other legumes not mentioned above.
Do not apply when crop is stressed from lack of moisture.
Do not spray when the temperature exceeds 90°F and/or is predicted to exceed 90°F during the three days following application.
Do not add any wetting agents or detergents to the spray solution unless as specified on this label.
Rainfall or overhead irrigation within 7-10 days following a 2,4-DB 200 application can cause unacceptable crop injury.
For irrigated crops, apply 2,4-DB 200 as soon as possible after irrigation. Delay the next irrigation for 7-10 days after spraying.
Follow all restrictions and precautions of any product used in tank mixture with 2,4-DB 200.
CONSERVATION RESERVE PROGRAM AREAS
2,4-DB 200 Broadleaf Herbicide Directions
PRODUCT
2,4-DB 200
RATE
1 - 3 quarts/A
APPLICATION TIMING AND SPECIFIC COMMENTS
CROP
Apply postemergence to
Conservation Reserve
Program areas containing
grasses which are tillering or
have a minimum of 6 leaves
and forage legumes (seedling
or established alfalfa, and
seedling birdsfoot trefoil,
which are emerged, healthy
and actively growing.
Temporary twisting of stems
and malformation of forage
legume leaves may occur
following treatment.
WEEDS
For control of lambsquarters,
pigweed, field pennycress,
wild mustard, common
ragweed, cocklebur, yellow
rocket, Russian thistle, and
annual morningglory species
less than 1 inch tall, apply
2,4-DB 200 at 1 to 2
quarts/A. For control of
these weeds up to 3 inches
tall, apply 2,4-DB 200 at 2 - 3
quarts/A. Use the higher
rates in dry, low humidity
areas.
For control or suppression of
smartweed and curled dock
up to 3 inches tall, apply 2,4-
DB 200 at 3 quarts/A.

c r /</ Page 13 of 13 //(,
RESTRICTIONS AND LIMITATIONS FOR USE ON CONSERVATION RESERVE PROGRAM (CRP)
Do not graze or harvest treated CRP areas.
Do not use on clover, peas or other legumes not mentioned above.
Do not apply when cover crop is stressed from lack of moisture.
Do not spray when the temperature exceeds 90°F and/or is predicted to exceed 90°F during the three days following application.
Do not add any wetting agents or detergents to the spray solution.
Rainfall or overhead irrigation within 10 days following a 2,4-DB 200 application can cause unacceptable legume injury.
WARRANTY DISCLAIMER
The directions for use of this product must be followed carefully. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, (1)
THE GOODS DELIVERED TO YOU ARE FURNISHED "AS IS" BY MANUFACTURER OR SELLER AND (2) MANUFACTURER
AND SELLER MAKE NO WARRANTIES, GUARANTEES, OR REPRESENTATIONS OF ANY KIND to BUYER OR USER
EITHER'EXPRESS OR IMPLIED, OR BY USAGE OF TRADE, STATUTORY OR OTHERWISE, WITH REGARD TO THE
PRODUCT SOLD, INCLUDING, BUT NOT LIMITED TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, USE,
OR ELIGIBILITY OF THE PRODUCT FOR ANY PARTICULAR TRADE USAGE. UNINTENDED CONSEQUENCES, INCLUDING
BUT NOT LIMITED TO INEFFECTIVENESS, MAY RESULT BECAUSE OF SUCH FACTORS AS THE PRESENCE OR
ABSENCE OF OTHER MATERIALS USED IN COMBINATION WITH THE GOODS, OR THE MANNER OF USE OR
APPLICATION, INCLUDING WEATHER, ALL OF WHICH ARE BEYOND THE CONTROL OF MANUFACTURER OR SELLER
AND ASSUMED BY BUYER OR USER. THIS WRITING CONTAINS ALL OF THE REPRESENTATIONS AND AGREEMENTS
BETWEEN BUYER, MANUFACTURER AND SELLER, AND NO PERSON OR AGENT OF MANUFACTURER OR SELLER HAS
ANY AUTHORITY TO MAKE ANY REPRESENTATION OR WARRANTY OR AGREEMENT RELATING IN ANY WAY TO THESE
GOODS.
LIMITATION OF LIABILITY
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, IN NO EVENT SHALL MANUFACTURER OR SELLER BE LIABLE
FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, OR FOR DAMAGES IN THE NATURE OF PENALTIES
RELATING TO THE GOODS SOLD, INCLUDING USE, APPLICATION, HANDLING, AND DISPOSAL. MANUFACTURER OR
SELLER SHALL NOT BE LIABLE TO BUYER OR USER BY WAY OF INDEMNIFICATION TO BUYER OR TO CUSTOMERS OF
BUYER, IF ANY, OR FOR ANY DAMAGES OR SUMS OF MONEY, CLAIMS OR DEMANDS WHATSOEVER, RESULTING FROM
OR BY REASON OF, OR RISING OUT OF THE MISUSE, OR FAILURE TO FOLLOW LABEL WARNINGS OR INSTRUCTIONS
FOR USE, OF THE GOODS SOLD BY MANUFACTURER OR SELLER TO BUYER. ALL SUCH RISKS SHALL BE ASSUMED BY
THE BUYER, USER, OR ITS CUSTOMERS. BUYER'S OR USER'S EXCLUSIVE REMEDY, AND MANUFACTURER'S OR
SELLER'S TOTAL LIABILITY SHALL BE FOR DAMAGES NOT EXCEEDING THE COST OF THE PRODUCT.
If you do not agree with or do not accept any of directions for use, the warranty disclaimers, or limitations on liability, do not use the
product, and return it unopened to the Seller, and the purchase price will be refunded.
Buctril and Sevin are registered trademarks of Aventis Crop Science.
Gramoxone , Reflex , and Starfire are registered trademarks of Syngenta Crop Protection, Inc.
Basagran, Blazer, Poast, Dash, Prowl, Pursuit Plus, Scepter, and Squadron are registered trademarks of BASF AG PRODUCTS.
Roundup and Honcho are registered trademarks of Monsanto Company.
Classic is a registered trademark of E.I. DuPont de Nemours Co., Inc.
Lorox is a registered trademark of Griffin, LLC
Sencor DF is a registered trademark of Bayer Crop Protection.
AgriSolutions™ is a trademark of Winfield Solutions, LLC.