# SUL-PREME 52 FLOWABLE SULFUR

- EPA Reg No: **1381-220**
- Registrant: WINFIELD SOLUTIONS, LLC
- Signal word: Caution
- Active ingredients: Sulfur (52%)
- Label accepted: 2009-05-22
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/001381-00220-20090522.pdf

---
·.e relld iMtructiOM on IYIvene IHIfolYl comDietiMl form. Form ADDroved. OMB No. 2070-Q08<l 
\ /Il 
emir .. 2·28·95 
United States D Registration opp Identifier Number 
&EPA Environmental Protection Agency Amendment 
Washington, DC 20460 .f Other 
Application for Pesticide - Section I 
1. Company/Product Number 2. EPA Product Manager 3. Proposed Classification 
1381-220 Mary Waller o None D Restricted 
4. Company/Product (Name) PM' 
Sul-Preme 52 Flowable Sulfur 21 
5. Name and Address of Applicant (Include ZIP Code) 6. Expedited Reveiw. In accordance with FIFRA Section 3(cIl3) 
Winfield Solutions, LLC c/o Alice Walker (blli), my product is similar or identical in composition and labeling 
3094 Country Club Road to: 
NOTIFICATION 
Senatobia, Mississippi 38668 EPA Reg. No. 
o Check if this is a new address Product Name MAY 22 2009 
Section - II 
D Amendment - Explain below. U Final printed labels in repsonse to 
Agency letter dated 
0 
Resubmission in response to Agency letter dated 
0 
"Me Too" Application. 
0 
Notification - Explain below. 
0 
Other - Explain below. 
Explanation: Use edditional pagels) if necessary. (For section I and Section 11.1 
New container disposal language per PRN 07-4. 98-10 changes: added the Chemtrec no., changed the company name, logo & warranty, corrected the hotline 
number, and deleted crops in NOTES on p. 4 which have been added to the label. This notification is consistent with the guidance in PR Notices 98-10 and 
07-4 and the requirements of EPA's regulations at 40 CFR §§ 152.46, 156.10, 156.140, 156.144, 156.146, and 156.156. No other changes have been made to 
the labeling or the Confidential Statement of Formula for this product. I understand that it is a violation of 18 U.S.C. Sec. 1001 to willfully make any false 
statement to EPA. I further understand that if the amended label is not consistent with the requirements of 40 CFR §§ 152.46, 156.10, 156.140, 156.144, 
156.146, and 156.156, this product may be in violation of FIFRA and I may be subiect to enforcement action and penalties under sections 12 and 14 of FIFRA. 
Section - III 
1. Material Thi. Product Will Be Packaged In: 
Child-Resistant Packaging Unit Packaging Water Soluble Packaging 2. Type of Container 
Bves @ves 
~ 
Yes 
~M'~I .f No .f No ,/ Plastic 
No Glass 
• C6rtification must If "Ves" No. per If "Ves" No. per Paper 
Unit Packaging wgt. container Package wgt container Other (Specify) 
be submitted 
I 
3. Location of Net Contents Information 4. Size(s) Retail Container Is.Loc.ation of Label Directions 
l{j Label U Container 1, 2.5, 30, 55 gallons t=j On label 
6. Manner in Which Label is Affixed to Product UUthograPh [(] Other self-adhesive booklet 
Paper Pelued 
Stencied 
Section - IV 
1. Contact Point /Comp/et8 items directly below for identification of individual to be contacted, if nec8ssary, to process this application.) 
Name Title Telephona No. (If. elude, Area Codel 
ALICE WALKER, Ph.D. 
ttl. (, I ! \ 
Registration Specialist '362-06<'-5995 ' , , , , 
l , 
'. '. 
Certification (! \ ( , ' 6. D"te Application , . R.',tul.d\Ej I certify that the statements I have mede on this form and all attachments thereto are true, accurate end complt'te. : 
I acknowledge that any knowlinglly false or misleading statement may be punishable by fine or imprisonment or ' , , (St'lmpedl 
both under epplicable law. '. , , . , 
2·t:t · 
' , 
, 
3. ntle , 
CcJ~L 
Registration Specialist 
' , 
.A L L.t..---
4. Typed Name 5. Date 
ALICE WALKER, Ph.D. 3-9-09 
.. EPA Form 8570·' (Rev. 3·941 PreVIous editions are obsolete. '. White· EPA File Copy (onglnal) venow • AppBcant Copy

March 9,2009 
Document Processing Desk (N otit) 
Office of Pesticide Programs (7504P) 
U. S. Environmental Protection Agency 
1200 Pennsylvania Ave., NW 
Washington, DC 20460 
Re: Notification of Revised Container Disposal Language per PRN 07-4 and Various 
Changes per PRN 98-10 
Sul-Preme® 52 Flowable Sulfur, EPA Reg. No. 1381-220 
This correspondence will constitute notification from Winfield Solutions, LLC of new container 
disposal language as required by PRN 07-4. 
Under PRN 98-10, we have made the following revisions: 
• Changed the company logo, company name and address, and disclaimer consistent with 
Winfield Solutions, LLC. 
• Corrected the hotline phone number. 
• Deleted cucurbits and spinach from the Notes on p. 4 as these crops have subsequently been 
added to the label. 
• Added the CHEMTREC number immediately after the Storage and Disposal block. 
Both highlighted and plain versions of the label are enclosed. 
This notification is consistent with the provisions of PR Notices 98-10 and 07-4 and the 
requirements of EPA's regulations at 40 CFR §§ 152.46, 156.10, 156.140, 156.144, 156.146, and 
156.156 and no other changes have been made to the labeling or the confidential statement of 
formula of this product. I understand that it is a violation of 18 U.S.C. Sec. 1001 to willfully 
make any false statement to EPA. I further understand that if this notification is not consistent 
with the terms of PR Notices 98-10 and 07 -4 and 40 CFR 152.46, 156.10, 156.140, 156.144, 
156.146, and 156.156, this product may be in violation of FIFRA and I may be subject to 
enforcement action and penalties under sections 12 and 14 of FIFRA. 
Thank you for adding this notification to the registration record for this product. 
Sincerely, 
Alice Walker, Ph.D. 
Registration Specialist 
Enclosures 
winfieldsolutionslic.com 
mail:P.O.Box64589:MS5705;SI.Paul.MN 55164·0589 
ship:1080 County Road F West Shoreview, MN 55126·2910 
p: 800·851·8810 
Winfield Solutions, LLC ! A Land O'Lakes Company 
, , 
\! l' 
" , 
l illl (

----~~-----------------------------------------------------------------------------------
~pSOLUTIONS TM 
SUL-PREME® 52 
Flowable Sulfur 
For Aerial or Ground Application 
ACTIVE INGREDIENT: 
Sulfur ...................................................................................................... 52.0% 
INERT INGREDIENTS: ............................................................................ .48.0% 
TOTAL .................................................................................................. 100.0% 
If on skin or • 
clothing • 
• 
If in eyes • 
• 
• 
Contains 6 lbs. sulfur per gallon. 
KEEP OUT OF REACH OF CHILDREN 
CAUTION 
FIRST AID 
Take off contaminated clothing. 
NOTIFICATION 
MAY 222009 
Rinse skin immediately with plenty of water for 15-20 minutes. 
Call a poison control center or doctor for treatment advice. 
Hold eye open and rinse slowly and gently with water for 15-20 minutes. 
Remove contact lenses, if present, after the first 5 minutes; then continue rinsing 
eye. 
Call a poison control center or doctor for further treatment advice. 
HOTLINE NUMBER 
Have the product container or label with you when calling a poison control center or doctor, or going 
for treatment. You may also contact 1-877-424-7252 for emergency medical treatment information. 
See left side panel for additional precautionary statements. 
EPA Reg. No. 1381-220 
EPA Est. No. ___ _ 
Manufactured For 
Winfield Solutions, LLC 
P.O. Box 64589 
St. Paul, MN 55164 
NET CONTENTS: 5 Gallons (19 Litres) 
WEIGHT PER GALLON: 11.5 LBS.lGAL. 
010309/9

PRECAUTIONARY STATEMENTS 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
CAUTION 
2 
Harmful if absorbed through the skin .. Causes moderate eye irritation. Avoid contact with eyes, skin 
or clothing. Wash thoroughly with soap and water before eating, drinking, chewing gum or using 
tobacco. Remove and wash contaminated clothing before reuse. 
PERSONAL PROTECTIVE EQUIPMENT 
Applicators and other handlers must wear: Long-sleeved shirt and long pants, chemical-resistant 
gloves made of any waterproof material, shoes plus socks and protective eyewear. 
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for 
washables, use detergent and hot water. Keep and wash PPE separately from other laundry. 
ENGINEERING CONTROLS STATEMENTS 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements 
listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d) (4-6)], 
the handler PPE requirements may be reduced or modified as specified in the WPS. 
USER SAFETY RECOMMENDATIONS 
Users should: 
• Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. 
• Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean 
clothing. 
ENVIRONMENTAL HAZARDS 
The product is toxic to fish. Do not apply directly to water, to areas where surface water is present or to 
intertidal areas below the mean high water mark. Do not apply where runoff conditions favor drift 
from treated areas. Do not apply where runoff if likely to occur. Do not contaminate water when 
disposing of equipment washwaters. 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
Do not apply this product in a way that will contact workers or other persons, either directly or through 
drift. Only protected handlers may be in the area during application. For any requirements specific to 
your State or Tribe, consult the agency responsible for pesticide. 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR 
part 170. This Standard contains requirements for the protection of agricultural workers on farms, 
forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for 
training, decontamination, notification and emergency assistance. It also contains specific instructions 
and exceptions pertaining to the statements of this label about personal protective equipment (PPE) and 
restricted-entry interval. The requirements in this box only apply to uses of this product that are 
covered by the Worker Protection Standard.

3 
Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 24 
hours. 
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard 
and that involves contact with anything that has been treated, such as plants, soil or water is: Coveralls, 
chemical-resistant gloves made out of any waterproof material, shoes plus socks and protective 
eyewear. 
NON-AGRICULTURAL USE REQUIREMENTS 
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker 
Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product 
is used to produce agricultural plants on farms, forests, nurseries, or greenhouses. 
Keep unprotected persons out of treated area until sprays have dried. 
STORAGE AND DISPOSAL 
Do not contaminate water, food or feed by storage or disposal. 
STORAGE: Store unused product in original container only in cool, dry area out of reach of children 
and animals. Do not store over 120°F. 
PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be disposed of on site or 
at an approved waste disposal facility. 
CONTAINER DISPOSAL: Use label language appropriate for container size and type. 
Nonrefillable containers. Do not reuse or refill this container. Clean container promptly after 
emptying. 
Nonrefillable container equal to or less than 5 gallons. Triple rinse as follows: Empty the 
remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow 
begins to drip. Fill the container V4 full with water and recap. Shake for 10 seconds. Pour rinsate into 
application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after 
the flow begins to drip. Repeat this procedure two more times. Then offer for recycling or 
reconditioning or puncture and dispose of in a sanitary landfill, or by incineration, or if allowed by 
state and local authorities, by burning. If burned, stay out of smoke. 
Nonrefillable container greater than 5 gallons. Triple rinse as follows: Empty the remaining 
contents into application equipment or a mix tank. Fill the container V4 full with water. Replace and 
tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete 
revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn 
the container over onto its other end and tip it back and forth several times. Empty the rinsate into 
application equipment or a mix tank or store rinsate for later use or disposal. Repeat this procedure 
two more times. Then offer for recycling or reconditioning or puncture and dispose of in a sanitary 
landfill, or by incineration, or if allowed by state and local authorities, by burning. If burned, stay out 
of smoke. 
Refillable container. Refill this container with pesticide only. Do not reuse this container for any 
other purpose. Cleaning the container before final disposal is the responsibility of the person disposing 
of the container. Cleaning before refilling is the responsibility of the refiller. To clean the container 
before final disposal, empty the remaining contents from this container into application equipment or 
mix tank. Fill the container about 10 percent full with water. Agitate vigorously or recirculate water 
with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection 
system. Repeat this rinsing procedure two more times. Then offer for recycling or reconditioning or 
puncture and dispose of in a sanitary landfill, or by incineration, or if allowed by state and local 
authorities, by burning. If burned, stay out of smoke. 
sin

FOR CHEMICAL EMERGENCY: Spill, leak, fire, exposure or accident, call 
CHEMTREC 1-800-424-9300. 
PRODUCT INFORMATION 
4 
SUL-PREME 52 FLOW ABLE SULFUR is a flowable sulfur formulation that may be applied as a 
ground or aerial application. Consult your State Agricultural Experiment Station or Extension 
Specialist for advice in selecting treatments from this label to best fit local conditions. 
USE ONLY ON CROPS LISTED AND ONLY AS SPECIFIED ON THIS LABEL. Do not apply 
when temperatures exceed or are likely to exceed 90°F. Do not use sulfur with oil or within 14 days of 
an oil spray (for citrus, 21 days), unless applied with a dormant oil to winter-dormant woody plants. 
Do not combine with emulsifiable liquids. 
NOTE: Sulfur will cause severe fruit and leaf injury to sulfur-sensitive crops. Do not apply or allow to 
drift to apricots, d' Anjou and Cornice pears, cranberries, filberts, tung trees, walnuts or other sensitive 
plants. Sulfur may bum foliage and fruit during periods or high temperatures and under certain climate 
conditions. 
SUL-PREME 52 FLOW ABLE SULFUR can be mixed with liquid fertilizer or water. 
DO NOT STOP AGITATION WITH SULFUR IN SPRAY EQUIPMENT. SULFUR IS HIGHLY 
CORROSIVE AND EQUIPMENT SHOULD BE CLEANED THOROUGHLY AFTER EACH 
DAY'S SPRAYING. 
CHEMIGATION 
Apply this product only through sprinkler including center pivot, lateral move, end tow, side (wheel) 
roll, traveler, big gun, solid set, or hand move irrigation systems. Do not apply this product through 
any other type of irrigation system. Crop injury, lack of effectiveness or illegal pesticide residues in the 
crop can result from nonuniform distribution of treated water. If you have questions about calibration, 
you should contact State Extension Service specialists, equipment manufacturers or other experts. A 
person knowledgeable of the chemigation system and responsible for its operation, or under the 
supervision of the responsible person, shall shut the system down and make necessary adjustments 
should the need arise. 
DO NOT STOP AGITATION WITH SULFUR IN SUPPLY TANK. SULFUR IS HIGHLY 
CORROSIVE AND EQUIPMENT SHOULD BE CLEANED THOROUGHLY. 
For center pivots, apply during one full revolution of the system. 
For portable or solid set systems, apply during the final 15 minutes of irrigation systems. DO 
NOT OPERATE IRRIGATION SYSTEM AFTER APPLICATION UNTIL DEPOSIT HAS 
THOROUGHLY DRIED. 
Public water system means a system for the provision to the public of piped water for human 
consumption if such system has at least 15 serviced connections or regularly serves an average of at 
least 25 individuals daily at least 60 days out of the year. Do not connect an irrigation system 
(including greenhouse systems) used for pesticide application to a public water system unless the 
pesticide label-prescribed safety devices for public water systems are in place. Chemigation systems

5 
connected to public water systems must contain a functional; reduced-pressure zone, backflow 
pre venter (RPZ) or the functional equivalent in the water supply line upstream from the point of 
pesticide introduction. 
As an option to the RPZ, the water from the public water system should be discharged into a reservoir 
tank prior to pesticide introduction. There shall be a complete physical break (air gap) between the 
outlet end of the fill pipe and the top or overflow rim of the reservoir tank of at least twice the inside 
diameter of the fill pipe. For non-public water sprinkler chemigation systems, the system must contain 
a functional check valve, vacuum relief valve, and low-pressure drain appropriately located on the 
irrigation pipeline to prevent water source contamination from backflow. The pesticide injection 
pipeline must contain a functional, automatic, quick-closing check valve to prevent the flow of fluid 
back toward the injection pump. The pesticide injection pipeline must also contain a functional, 
normally closed, solenoid-operated valve located on the intake side of the injection pump and 
connected to the system interlock to prevent fluid from being withdrawn from the supply tank when 
the irrigation system is either automatically or manually shut down. The system must contain 
functional interlocking controls to automatically shut off the pesticide injection pump when the water 
pump motor stops, or in cases where there is no water pump, when the water pressure decreased to the 
point where pesticide distribution is adversely affected. 
Systems must use a metering pump, such as a positive displacement injection pump (e.g., diaphragm 
pump) effectively designed and constructed of materials that are compatible with pesticides and 
capable of being fitted with a system interlock. Do not apply when wind speed favors drift beyond the 
area intended for treatment. 
APPLICATION INSTRUCTIONS 
FRUIT TREE CROPS: 
Unless otherwise specified for specific crops, dosage rates are given as pints of SUL-PREME 52 
FLOW ABLE SULFUR per 100 gallons water for use in a thorough coverage spray. The total amount 
of SUL-PREME 52 FLOW ABLE SULFUR per acre should be 2 to 4 gallons depending on the size of 
the trees. Because of the variations in the types of spray equipment used, a range of low and high rates 
is listed. For high volume sprayers (output 800 to 1000 gallons spray per acre), use the low rate; for the 
low volume sprayers (output 20 to 300 gallons per spray per acre), use the high rate. 
ALMONDS: 
Brown Rot, Blossom and Twig Blight, Leaf Spot, Scab, Powdery Mildew, Silver Mite, Flat Mite, 
Almond Mite, European Red Mite, Atlantic Mite, Pacific Mite, Two-Spotted Mite, Brown Mite, Red 
Spider Mite, and Rust. Apply 1 to 2-1/2 gallons per acre at pre-bloom or petal fall and repeat at 7 to 14 
day intervals. 
APPLE, PEAR: 
Scab. 
Pre-bloom through calyx sprays 
Cover sprays 
Powdery Mildew. 
Pre-bloom through calyx sprays 
Cover sprays 
Pear Rust Mite. 
1-112 to 3-1/2 pints 
3/4 to 2 pints 
3 pints 
2 pints 
Add 1 quart per 100 gallons to be applied with oil during either dormant or delayed dormant 
application.

AVOCADOS: 
Brown Mite. Apply 5 gallons per acre as needed. 
CHERRY, PLUM, PRUNE: 
Brown Rot, Leaf Spot. 
Pink and Bloom Sprays 
Petal Fall, Shuck and Cover Sprays 
CITRUS: 
1-112 to 3-112 pints 
2/3 to 3/4 pints 
6 
Rust Mite, Clover Mite, Thrips. Begin application at the first sign of infestation. Apply 1 to 2 gallons 
per acre in sufficient water for thorough coverage. Repeat if necessary. Do not apply within 21 days of 
an oil application. 
MANGOES: 
Powdery Mildew. Apply 4 gallons per acre before flowering and continue at intervals of 20 days. 
PEACH, NECTARINE: 
Powdery Mildew, Brown Rot, Scab. 
Pink and Bloom Sprays 1-112 to 3-1/2 pints 
Petal Fall, Shuck and Cover Sprays 2/3 to 1-3/4 pints 
Application to mature nectarines may cause discoloration. 
SOFT FRUIT: 
Unless otherwise specified for specific crops, dosage rates are given as pints or gallons of SUL­
PREME 52 FLOW ABLE SULFUR per acre. This product must be applied by ground equipment or 
aircraft in sufficient water to provide thorough coverage. 
BLACKBERRIES, BOYSENBERRIES, DEWBERRIES, LOGANBERRIES, BLUEBERRIES, 
GOOSEBERRIES, HUCKLEBERRIES, AND CURRANTS: 
Powdery Mildew. Apply 2-112 gallons per acre before blossom and continue at 10-day intervals as 
necessary. 
RASPBERRIES: 
Powdery Mildew. Apply 2-1/2 gallons per acre each week from first bloom to fruit set. 
STRAWBERRIES: 
Powdery Mildew. Use 2 pints. Apply at first sign of infection and repeat at 3-week intervals. For 
strawberries that will be canned, discontinue application of sulfur well before harvest in accordance 
with local canners' recommendations. 
FIELD AND VINE CROPS: 
Unless otherwise specified for specific crops, this product must be applied by ground equipment or 
aircraft in sufficient water to provide thorough coverage. 
BEANS (dry, colored, green, snap, lima): 
Powdery Mildew, Rust. Use 4 to 8 pints of SUL-PREME 52 FLOW ABLE SULFUR per acre in 
sufficient water for thorough coverage. Begin application at the first sign of disease. Repeat at 7 to 14 
day intervals to keep new growth protected. 
I 
g' /12

7 
BROCCOLI, BRUSSELS SPROUTS, CABBAGE, CAULIFLOWER, COLLARDS, KALE, 
MUSTARD GREENS, RUTABAGAS, TURNIPS: 
Powdery Mildew and Red Spider Mite. Apply 7 pints per acre at early leaf stage and repeat every 14 
days as necessary. 
CARROTS: 
Powdery Mildew and Petrobia Mite. Apply 13 pints per acre at early leaf stage and repeat every 14 
days as necessary. 
CUCURBITS (melons, cucumbers, squash): 
Powdery Mildew. Apply 4 gallons per acre when disease first appears and repeat as necessary. 
CEREALS: 
Corn, wheat, barley, oats, rye, sorghum: Red Spider Mite, Two-Spotted Mite, Pacific Mite and 
Atlantic Mite. Apply 2-112 gallons per acre when mites first appear and continue as necessary. 
GRASS GROWN FOR SEED: 
Powdery Mildew, Rust, Red Spider Mite, Pacific Mite, Atlantic Mite, Two-Spotted Mite. Apply at 4 
to 8 pints at first sign of infection and repeat every 14 days as needed. 
HOPS: 
Powdery Mildew. Apply 4 to 8 pints early in season before first signs of infection appear. Repeat at 10 
to 14 day intervals as needed. Use sufficient water for thorough coverage. 
COTTON: 
Atlantic Mite. Apply 2 pints per acre for early season control and up to 1 gallon per acre for mid- to 
late-season control. 
GRAPES: 
Powdery Mildew. Use I to 2 pints per 100 gallons water, maximum of 8 pints, SUL-PREME 52 
FLOW ABLE SULFUR per acre in spring and summer. Make first application when shoots are 6 to 8 
inches long, second when shoots are 12 to 15 inches long, and third at about bloom stage. The timing, 
rate and number of applications will vary with local conditions. Consult State Agricultural Extension 
Service or State Agricultural Experiment Stations in your region for specific information. Follow the 
USE PRECAUTIONS given on this label. 
LETTUCE (Head and Leaf): 
Powdery Mildew, Rust, Red Spider Mite. Apply 2/3 to 3/4 gallon per acre at early leaf stage and 
repeat every 14 days or as needed. Thorough coverage is required. 
ONION AND GARLIC: 
Powdery Mildew and Petrobia Mite. Apply 1 gallon per acre when disease first appears and repeat as 
necessary. 
PEANUTS: 
Rust. Use 2 to 4 pints per acre of SUL-PREME 52 FLOW ABLE SULFUR in enough water for good 
coverage. Begin 40 to 60 days after planting. Use 7 to 14 day intervals as long as needed to control 
rust.

8 
PEAS: 
Powdery Mildew. Apply 3 to 7 pints per acre at early leaf stage and repeat every 10 to 14 days s 
necessary. Sulfur deficiency: Use 1 to 2 quarts per acre starting at late bud to early bloom stage. 
Repeat in 10 to 14 days. 
PEPPERMINT AND SPEARMINT: 
Powdery Mildew and Mites. Apply 2 to 4 quarts per acre in sufficient water to insure thorough 
coverage of plants when first sign of infection appears. Apply first spray when plants have 4 to 5 
leaves followed by additional sprays at 3-week intervals, until bud stage or 4 weeks before harvest. 
After harvest, apply when infection appears or when plants have 4 to 5 leaves and repeat at 3 week 
intervals as often as necessary to cover new growth or until growth ceases in the fall. 
Before applying on a crop to be harvested for oil, authorization should be obtained from the buyer of 
the oil. 
Use a minimum of 10 gallons per acre of spray solution, whether applied by aerial or ground spray 
equipment. 
PEPPERS: 
Powdery Mildew and Red Spider Mite. Apply 7 pints per acre at early leaf stage and repeat every 14 
days as necessary. 
POTATOES: 
Powdery Mildew and Suppression of Early Blight. Use 2 to 4 quarts in 5 to 10 gallons water per acre 
by air or 10 to 20 gallons of water if by ground rig. Apply at the first sign of infection and repeat at 3-
week intervals. 
SOYBEANS: 
Leaf Spot and Powdery Mildew. Apply 2 gallons per acre at early leaf stage and repeat every 14 days 
as necessary. 
SPINACH: 
Powdey Mildew and Rust. Apply 1-1/3 to 5 gallons water per acre. Apply when disease first appears. 
Repeat at 7 to 10 day intervals. 
SUGAR BEETS: 
Powdery Mildew. Apply at 4 to 8 pints in 10 gallons of water per acre by air at first sign of infection. 
Repeat applications should be made at 10 to 30 day intervals or as necessary throughout the season. 
Under most disease conditions only one or two applications will be needed. 
SUGARCANE: 
Rust. Apply 1 gallon per acre as required by disease pressure in sufficient water for thorough 
coverage. 
TOMATOES: 
Powdery Mildew, Tomato Russet Mite, Two-Spotted Mite. Apply 4 to 10-2/3 pints per acre as 
necessary. Thorough coverage is required.

9 
Sprinkler Irrigation Water-Use I to 2 gallons per acre by injecting into sprinkler system at or near the 
irrigation pump. For center pivot systems, apply during one full revolution of the system. For portable 
or solid set systems, apply during the final 15 minutes of the irrigation period. Do not operate irrigation 
systems after application until deposit has thoroughly dried. Apply the product through irrigation 
systems containing: 1) anti-siphon and check valves which will prevent water source contamination 
and overflow of the slurry tank, 2) interlocking controls between the metering device and the water 
pump to insure simultaneous shut-off. 
ORNAMENTALS: 
For control of Powdery Mildew of Alder, Azalea, Bittersweet, Boston Ivy, Buttonbush, Catalpa, 
Chrysanthemums, Dahlia, Delphinium, Dogwood, Honeysuckle, Horse Chestnut, Hydrangea, Lilac, 
Linden, Magnolia, Matrimony Vine, Phlox, Rhododendron, Rose, Staghorn Sumac, Sweet Pea, 
Sycamore, Trumpet Vine, Witch-Hazel, Zinnia and for control of Rust on Aster, Carnation, Rose, 
Snapdragon, apply 7 pints per 100 gallons of water when disease first appears and repeat at 10 day 
intervals as required. 
TURF: 
For use on turf, all types and applications (including but not limited to golfputting/nonputting greens) 
with no cutting height restrictions to suppress Fusarium Patch in Bentgrass, Bluegrass, Ryegrass, and 
Fescue and Take-All in Bentgrass. Apply 1-1/3 to 7-1/3 gallons per acre on a monthly basis 
September through May. Apply as a preventive measure prior to the outbreak of disease. Use the 
higher rate when weather conditions indicate a potential for increased disease expression. Higher rates 
should be used when temperatures are below 80°F, lower rates when temperatures exceed 80°F. This 
product can cause Poa Annua decline. Thorough coverage is required. 
NUTRIENT USE: 
This product contains sulfur, which is an essential nutrient for plant growth. Therefore, when applied 
as directed, this product can be considered a necessary component of the total plant nutrient profile. 
This product may be applied as a nutritional supplement to any crop listed on this label at rates given 
in the directions for use for that crop. Local agricultural authorities including your State Agricultural 
Experimental Station or Extension Specialist may be a reliable source for additional information 
pertaining to this use. Some crops may be damaged by sulfur under certain climatic conditions. Refer 
to section titled "Product Information" for additional precautions. 
FOR USE AS A SOIL AMENDMENT: Apply this product with ground equipment, aircraft or 
sprinkler irrigation. 
Soil Application Rates, All Crops 
Maintenance applications 
Moderate deficiency 
Severe deficiency 
1 gallon per acre 
1-2 gallons per acre 
2-3 gallons per acre 
Use general rates when leaf and soil tests are not available. For every 10 pounds of nitrogen, most 
crops need 1 pound of sulfur. When applied to the soil, this product can be mixed with fertilizer or 
water. Use 1 to 3 gallons of product per acre depending on the nitrogen requirement of the crop. If 
other forms of sulfur are used, adjust the above rates accordingly. 
11 [I( I

10 
WARRANTY DISCLAIMER 
The directions for use of this product must be followed carefully. TO THE EXTENT CONSISTENT 
WITH APPLICABLE LAW, (1) THE GOODS DELIVERED TO YOU ARE FURNISHED "AS IS" 
BY MANUFACTURER OR SELLER AND (2) MANUFACTURER AND SELLER MAKE NO 
WARRANTIES, GUARANTEES, OR REPRESENTATIONS OF ANY KIND TO BUYER OR 
USER, EITHER EXPRESS OR IMPLIED, OR BY USAGE OF TRADE, STATUTORY OR 
OTHERWISE, WITH REGARD TO THE PRODUCT SOLD, INCLUDING, BUT NOT LIMITED 
TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, USE, OR ELIGIBILITY 
OF THE PRODUCT FOR ANY PARTICULAR TRADE USAGE. UNINTENDED 
CONSEQUENCES, INCLUDING BUT NOT LIMITED TO INEFFECTIVENESS, MAY RESULT 
BECAUSE OF SUCH FACTORS AS THE PRESENCE OR ABSENCE OF OTHER MATERIALS 
USED IN COMBINATION WITH THE GOODS, OR THE MANNER OF USE OR APPLICATION, 
INCLUDING WEATHER, ALL OF WHICH ARE BEYOND THE CONTROL OF 
MANUF ACTURER OR SELLER AND ASSUMED BY BUYER OR USER. THIS WRITING 
CONTAINS ALL OF THE REPRESENTATIONS AND AGREEMENTS BETWEEN BUYER, 
MANUFACTURER AND SELLER, AND NO PERSON OR AGENT OF MANUFACTURER OR 
SELLER HAS ANY AUTHORITY TO MAKE ANY REPRESENTATION OR WARRANTY OR 
AGREEMENT RELATING IN ANY WAY TO THESE GOODS. 
LIMITATION OF LIABILITY 
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, IN NO EVENT SHALL 
MANUFACTURER OR SELLER BE LIABLE FOR SPECIAL, INCIDENTAL, OR 
CONSEQUENTIAL DAMAGES, OR FOR DAMAGES IN THEIR NATURE OF PENAL TIES 
RELA TING TO THE GOODS SOLD, INCLUDING USE, APPLICATION, HANDLING, AND 
DISPOSAL. MANUFACTURER OR SELLER SHALL NOT BE LIABLE TO BUYER OR USER 
BY WAY OF INDEMNIFICATION TO BUYER OR TO CUSTOMERS OF BUYER, IF ANY, OR 
FOR ANY DAMAGES OR SUMS OF MONEY, CLAIMS OR DEMANDS WHATSOEVER, 
RESULTING FROM OR BY REASON OF, OR RISING OUT OF THE MISUSE, OR FAILURE TO 
FOLLOW LABEL WARNINGS OR INSTRUCTIONS FOR USE, OF THE GOODS SOLD BY 
MANUF ACTURER OR SELLER TO BUYER. ALL SUCH RISKS SHALL BE ASSUMED BY 
THE BUYER, USER, OR ITS CUSTOMERS, BUYER'S OR USER'S EXCLUSIVE REMEDY, 
AND MANUFACTURER'S OR SELLER'S TOTAL LIABILITY SHALL BE FOR DAMAGES 
NOT EXCEEDING THE COST OF THE PRODUCT. 
If you do not agree with or do not accept any of directions for use, the warranty disclaimers, or 
limitations on liability, do not use the product, and return it unopened to the Seller, and the purchase 
price will be refunded. 
SUL-PREME is a registered trademark ofRSA MicroTech, LLC. 
Agrisolutions is a trademark of Winfield Solutions, LLC. NOTifiCATiON 
MAY 222009