# SERENADE BIOFUNGICIDE WETTABLE POWDER

- EPA Reg No: **264-1144**
- Registrant: BAYER CROPSCIENCE, LLC
- Signal word: Caution
- Active ingredients: Bacillus subtilis strain QST 713 (10%)
- Label accepted: 2007-05-16
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/069592-00004-20070516.pdf

---
ID 
(-1 
! -'1 c}(A, -7 
l '3 \~ ! '-' 
\\1"EO sr"'t; .,J ~O' 
~ __ 1, 
"'~~ ~ <!l 
~ i ~ ~'L PAO'~u 
U,S, ENVIRONMENTAL PROTECTION AGENCY 
Office Of pesticide Programs 
Blopesticides and POllution Prevention Division (7511P) 
1200 Pennsylvania Avenue NW 
Washington, DC 20460 
NOTICE OF PESTICIDE REGISTRATION 
2L Registration 
_ Reregistration 
(under 
Name and Address of Registrant (include ZIP Code); 
AgraQuest, Inc. 
1530 Drew Avenue 
Davis, CA 956166320 
EPA Reg, 
Meif~U!ft~ Number: 
69592-4 
Conditional 
Term of 
Time- limited Issuance: 
Name of pesticide Product: 
Serenade Biofungicide Wettable 
Powder 
On tne I)asls of Information furnished by the registrant, the above named pesticide is hereby registered/reregistered under 
the Federal Insecticide, Fungicide and Rodenticide Act, 
Registration IS In no way to be construed as an endorsement or recommendation of this product by the Agency, In order to 
protect health and the environment, the Administrator, on his motion, may at any time suspend or cancel the registration of 
a pestiCide In accordance With the Act, The acceptance of any name In connection with the registration of a product under 
this Act is not to be construed as giving the registrant a right to exclusive use Of the name or to Its use If It has been covered 
bY others 
The re9istration application referred to above, submitted in connection with registration under' 3(c)(7)(C) of the 
Federal Insecticide, Fungicide, and Rodenticide Act, as amended, is acceptable provided that you do the following 
terms and conditions, 
1, EPA has identified one inert ingredient listed in this product's Confidential Statement of Formula [dated 
2!7i2000] for which an exemption from the requirement of a tolerance is being revoked, This revocation is 
affective August 8, 2008 (Federal Register of August 9, 2006, 71 FR 45415), This product is being 
conditionally registered subject to an appropriate tolerance or exemption from the requirement of a tolerance 
for the affected inert ingredient being in place prior to the above date, 
2, Submit/Cite all data reqUired for registration of your product under FIFRA ' 3(c)(5) when the Agency requires 
all rHgistrants of similar products to submit such data 
3, Submrt two (2) copies of the revised final printed labeling before you release the product for shipment Refer 
to altached Type Size Requirements for final printed labeling, 
This rellistration will automatically expire on midnight AuguSI 8. 2008- EPA will reevaluate this registration before 
August 8, 2008 to determine whether to convert the registration to a non-expiring registration, 
Signature of Approving OffiCial- Date 
W, Michael McDavit, Associate Director 
Biopesticides and Pollution Prevention Division (7511 P) 
Form a570-6

------------ ------ -- -------------------------------------------
UNITl .iTATES ENVIRONMENTAL PROTECTIO. 3ENCY 
CONCURRENCES 
SYMBOL ~ 7'0 II P I!.. II Ii 
SURNAME ~ •••••••• ~ •••• :()l ...... ;z;j;J ..... .............................................................................................................................. . 
DATE ~ ··~·····~iiiJ7'········ .............................................................................................................................. . 
EPA Form 1320-1 A (1/90) 
I 
Printed on Recycled Paper OFFICIAL FILE COPY 
* U,S. Government Printing Oflice: 2005 206-899 (mac)

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label 1006 
WETTABLE POWDER 
[OPTIONALIAL TERNATE STATEMENTS:] 
[USE INDOORS AND OUTDOORS] 
[USE IN FIELD APPLICATIONS, GREENHOUSES, NURSERIES, SHADE 
HOUSES, LANDSCAPES, INTERIORSCAPES, SEEDLING PRODUCTION 
SITES, FOREST SEEDLING PRODUCTION SITES.] 
[USE IN TANK MIXES OR ROTATIONAL ALTERNATING SPRAY 
PROGRAMS WITH OTHER CROP PROTECTION PRODUCTS] 
rUSE IN RESISTANT MANAGEMENT PROGRAMS] 
[USE GROUND, AERIAL, CHEMIGATION AND HAND APPLIED 
EQUIPMENT] 
[FOR USE ON ORNAMENTALS, TREES, SHRUBS, TURF, LAWNS, SOD, 
GOLF COURSES (GREENS, TEES, FAIRWAYS AND ROUGHS), 
SEEDLINGS, AND CONIFERS] 
[USE IN PRODUCTION OF CONIFERS FOR REFORESTATION] 
ACTIVE INGREDIENT 
QST 713 strain of dried Bacillus subtilis . .... 10% 
OTHER INGREDIENTS. . . . . . .. .. . . ...... 90% 
Total ... .100.0% 
Contains a minimum of 5 x 109 cfu/g 
EPA Reg. No. 69592-4 
EPA Est. No.: 
69592-
MEX-1 
2 
67545- 66728-
AZ-1 GA-2 
4 5 
37429- 69592-
GA-2 CA-1 
Superscript corresponds to last d~it of lot number stamped on 
container 
U.S. Patent Nos. 6,060,051, 6,103,228, 6,291,426, and 
6,417,163 on QST 713 strain of Bacillus subtilis 
Net weight: [1 or 2 or4 or6 or 12 or 18 or 24 or 1000 Ibs. or 
1 or5 or 10 kg] 
KEEP OUT OF REACH OF CHILDREN 
CAUTION 
FIRST AID 
IF INHALED: Move person to fresh air. If person is not 
breathing, call 911 or an ambulance, then give artificial 
respiration, preferably mouth-to-mouth if possible. Call 
a poison control center or doctor for further treatment 
advice. 
IF ON SKIN: Take off contaminated clothing. Rinse 
skin with plenty of water for 15-20 minutes. Call a 
poison control center or doctor for further treatment 
advice. 
IF IN EYES: Hold eyes open and rinse slowly and 
gently with water for 15-20 minutes. Remove contact 
lenses, if present after the first 5 minutes, then 
continue rinSing eye. Call a poison control center or 
doctor for treatment advice. 
Have the product label with you when calling a poison 
control center or doctor. 
[For smaller container sizes:] 
[See attached label booklet for First Aid, Precautionary 
Statements and Directions for Use.] 
[PUll back tab for First Aid and Precautionary 
Statements and Directions for Use.] 
PRECAUTIONARY STATEMENTS- Agricultural Use 
HAZARDS TO HUMANS & DOMESTIC ANIMALS 
CAUTION 
Harmful if inhaled. Avoid breathing spray mist. 
Harmful if absorbed through skin. Prolonged or 
frequently repeated skin contact may cause allergic 
reactions in some individuals. Avoid contact with skin, 
eyes or clothing. Wash thoroughly with soap and 
water after handling. Causes moderate eye irritation. 
Remove contaminated clothing and wash clothing 
before reuse. 
PERSONAL PROTECTIVE EQUIPMENT (PPE) 
Applicators and other handlers must wear: 
• Long-sleeved shirt and long pants 
• Waterproof gloves 
• Shoes plus socks 
• NIOSH approved respirator with any N, P, R or HE 
filter. 
Follow manufacturer's instructions for cleaning and 
maintaining PPE. If no instructions are available, use 
detergent and hot water for washables. Keep and 
wash PPE separately from other laundry. 
[OPTIONAL STATEMENT: When handlers use closed 
systems, enclosed cabs, or aircraft in a manner that 
meets reqUirements listed in the Worker Protection 
Standard (WPS) for agricultural pesticides [40 CFR 
170.240 (d) (4-6)], the handler PPE requirements may 
be reduced or modified as specified in the WPS.] 
USER SAFETY RECOMMENDATIONS 
Users should: 
Wash hands before eating, drinking, chewing gum, 
using tob;!cco or using the toilet. 
Remove clothing/PPE immediately if pesticides get 
inside. Then wash thoroughly and put on clean 
clothing. 
Remove PPE immediately after handling this product. 
Wash the outside of gloves before removing. As soon 
as possible, wash thoroughly and change Into clean 
clothing.

Revised 08 March 2007 Serenade Biofllngicide Wettable Powder Master Label 2 0136 
ENVIRONMENTAL HAZARDS-Agricultural Use 
Do not apply directly to water or to areas where 
surface water is present, or to intertidal areas below' 
the mean high water mark. Do not contaminate water 
when disposing of equipment washwater or rinsate. 
Do not apply when weather conditions favor drift or 
runoff from treated areas. 
For Agricultural Use 
DIRECTIONS FOR USE - Agricultural Use 
It is a violation of Federal law to use this product in a 
manner inconsistent with its labeling. For any 
requi rements specific to your state or tribe, consult the 
agency responsible for pesticide regulation. 
Do not apply this product in a way that will contact 
workers or other persons, either direcHy or through 
drift. Only protected handlers may be in the area 
during application. 
For emergencies such as leaks or spills, call 24-
hour toll- free CHEMTREC hotline at 
1.800.424.9300. 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling 
and with the Worker Protection Standard 40 CFR 
Part 170. This Standard contains requirements for 
the protection of agricultural workers on farms, 
forests, nurseries and greenhouses and handlers of 
agricultural pesticides. It contains reqUirements for 
training, decontamination, notification and 
emergency assistance. It alSO contains speCific 
instructions and exceptions pertaining to the 
statements on this label about personal protective 
equipment (PPE), and restricted entry intervals. 
The requirements in this box only apply to uses of 
this product that are covered by the Worker 
Protection Standard. 
Do not enter or allow worker entry into treated 
areas during the restricted entry interval (REI) of 4 
hours. 
PPE required for early entry to treated areas that is 
permitted under the Worker Protection Standard 
and that involves contact with anything that has 
been treated, such as plant$, soil or water is: 
coveralls, waterproof gloves, shoes plus socks. 
Exception: if the product is soil injected or soil 
incorporated, the Worker Protection Standard. 
under certain circumstances. allows workers to 
enter the treated area if there will be no contact with 
anything that has been treated. 
STORAGE AND DISPOSAL- Agricultural Use 
Do not contaminate water, food, or feed by storage 
and disposal. 
STORAGE. Store in a dry area inaccessible to 
children. Store in original containers only. Keep 
container closed when not in use. 
PESTICIDE DISPOSAL: Wastes resulting from the 
use of this product may be disposed of on site or at an 
approved waste disposal facility. Do not contaminate 
water when disposing of equipment rinsate. 
CONTAINER DISPOSAL: 
For 1000 Ib, bulk bag with liner: Completely empty 
liner by shaking and tapping sides and bottom to 
loosen clinging particles. Dispose of liner in a sanitary 
landfill or by incineration if allowed by State and local 
authorilies. If burned stay out of smoke. Return 
empty bulk bag to manufacturer for reuse. If bulk bag 
is contaminated and cannot be reused, dispose of in 
the same manner as liner. 
For all other agricultural use containers: 
Completely empty bag into application equipment. 
Then dispose of empty bag in a sanitary landfill or by 
incineration or, if allowed by State and local authorities, 
by burning. If bumed, stay out of smoke. 
GENERAL USE INFORMATION- Agricultural Use 
Serenade Biofungicide Wettable Powder is a broad 
spectrum. preventative product for the control or 
suppression of many important plant diseases. 
Serenade Biofungicide Wettable Powder may be 
applied as a foliar spray alone, in altemating spray 
programs or in tank mixes with other registered crop 
protection products. When conditions are conducive to 
heavy disease pressure, use Serenade Biofungicide 
Wettable Powder in a rotational program with other 
registered fungiCides. Serenade Biofungicide Wettable 
Powder may be applied with spray equipment 
commonly used for making ground or aerial 
applications and sprinklerlirrigation systems commonly 
used for chemigation. 
[OPTIONAL STATEMENT: Serenade Biofungicide 
Wettable Powder is most effectively used in a 
preventive disease management program. For 
improved performance use Serenade Biofungicide 
Wettable Powder in a tank-mix or rotational program 
with other registered fungicides. When using Serenade 
Biofungicide Wettable Powder alone for the first time a 
rate of 4 pounds per acre is recommended. 
Depending upon dis.ease pressure the rate can be 
increased and/or spray intervals decreased. To 
enhance performance it is recommended that a 
surfactant [such as Biatune]. known to be safe to the 
target crop, be added to the spray tank to improve 
penetration and coverage of above-ground portions of 
the plant.]

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label 30136 
INTEGRATED PEST MANAGEMENT (IPM) of water per acre. 
Integrate Serenade Biofungicide Wettable Powder into 
an overall disease and pest management strategy 
whenever fungicide use is necessary. Follow practices 
known to reduce disease development. Consult local 
agricultural authorities for specific IPM strategies 
developed for your crop(s) and location. 
USE RATE DETERMINATION - Agricultural Use 
Carefully read and follow all label directions, use rates 
and restrictions. Serenade Biofungicide Wettable 
Powder should be applied prior to or in the early stages 
of disease development. Use maximum label rates and 
shortened spray intervals for conditions conducive to 
threatening or rapid disease development. For proper 
application, determine the number of acres to be 
treated, the recommended label use rate and select 
appropriate gallonage to give good canopy penetration 
and coverage of plant parts to be protected. Prepare 
only the amount of spray solution required to treat the 
measured acreage. Accurate spray equipment 
calibration is essential prior to use. 
PRE HARVEST INTERVAL - Agricultural USIl 
Serenade Biofungicide Wettable Powder can be 
applied up to and including the day of harvest. 
APPLICATION INSTRUCTIONS - Agricultural Use 
GENERAL: Avoiding spray drift at the application site 
is the responsibility of the applicator. The interaction of 
many equipment-and-weather-related factors 
determines the potential for spray drift. The applicator 
and the grower/treatment coordinator are responsible 
for considering all of these factors when making 
decisions. Where states have more stringent 
regulations, they should be observed. Note: This 
section is advisory in nature and does not supersede 
the mandatory label requirements. 
GROUND: Be sure to maintain agitation during mixing 
and application to assure unifonTl product suspension. 
Thorough coverage of all foliage is essential for 
effective disease control. Serenade Biofungicide 
Wettable Powder can be applied in commonly used ground 
equipment, hose-end, pressurized, greenhouse and hand­
held sprayers. To achieve good coverage use proper 
spray pressure, gallonage per acre, nozzles, nozzle 
spacing and ground speed. Consult spray nozzle and 
accessory catalogues for specific information on proper 
equipment calibration. 
AERIAL: This product can be applied by aerial 
application. Refer to the Aerial Drift Reduction 
Advisory Information section of this label for general 
directions and precautions. Use the application rate 
indicated for the appropriate crop in sufficient water to 
achieve thorough coverage, or a minimum of 3 gallons 
CHEMIGATION: This product can be applied through 
sprinkler or drip type irrigation systems, including a 
center pivot, lateral move, end tow, side wheel roll, 
trayeler, solid set, and hand move. Refer to the 
Chemigation Directions for Use section of this label for 
general directions and precautions. Use the 
application rate indicated for the appropriate crop as 
specified in the Use Recommendations section of this 
label. 
MIXING INSTRUCTIONS - Agricultural Use 
MIXING: Serenade Biofungicide Wettable Powder 
must be diluted with water for Spray applications and 
may be used in spray equipment commonly used for 
making ground applications. Partially fill the spray tank 
with clean water and begin agitation. Add the specified 
amount of Serenade Biofungicide Wettable Powder to 
the tank. Finish filling the tank to the desired volume to 
obtain the proper spray concentration. It is critical that 
the spray solution be agitated during mixing and 
application to assure a unifonTl suspension. Do not 
allow spray mixture to stand overnight or for prolonged 
periods. [Optional Statement: Maintain a spray 
solution pH between 4.5 and 8.5]. 
Serenade Biofungicide Wettable Powder may be tank­
mixed with other registered pesticides to enhance plant 
disease control. Do not exceed recommended dosage 
rates. This product cannot be mixed with any product 
with prohibition against such mixing. Use of the 
resulting tank mix must be in accordance with the more 
restrictive label limitations and precautions. 
COMPATIBILITY: Do not combine Serenade 
Biofunglclde Wettable Powder In the spray tank 
with pesticides, surfactants or fertilizers if there 
has been no previous experience or use of the 
combination to show It is physically compatible, 
effective and non-injurious under your use 
conditions. 
Serenade Biofungicide Wettable Powder is compatible 
with many commonly used pesticides, fertilizers, 
adjuvants and surfactants but has .!lQ! been fully 
evaluated with all of these. To ensure compatibility of 
tank-mix combinations they should be evaluated prior 
to use, as follows: Using a suitable container add 
proportional amounts of product to water. Add 
wettable powders first, followed by water dispersible 
granules, then by liquid flowables and lastly, 
emulsifiable concentrates. Mix thoroughly and let 
stand for at least five minutes. If the combination stays 
mixed or can be remixed, it is physically compatible. 
Test the combination on a small portion of the crop to 
be treated to ensure that a phytotoxic response will not 
occur as a result of application.

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label 
[OPTIONAL STATEMENT: Do not use with 
penetrant-type adjuvants.) 
ADDITIVES: Serenade Biofungicide Wellable Powder 
is compatible with a wide range of additives. Since the 
product is primarily a protectant, thorough coverage of 
all above-ground plant parts is required for effective 
product performance. To improve plant surface 
coverage, add a non-phytotoxic adjuvant [such as 
Biotune "'J to spray tank. 
CHEMIGATION DIRECTIONS FOR USE 
General Requirements: 
1) Apply this product only through sprinkler or drip 
type irrigation systems including center pivot, 
lateral move, end tow, side wheel roll, traveler, 
solid set or hand move systems. Do not apply this 
product through any other type of irrigation system. 
2) Crop injury or lack of effectiveness can result from 
non-uniform distribution of treated water. 
3) Ensure that the irrigation system used is properly 
calibrated and if you have questions, call the State 
Extension Service specialists, the equipment 
manufacturer or other experts. 
4) Do not connect an irrigation system (including 
greenhouse systems) used for pesticide 
application to a public water system unless the 
pesticide label-prescribed safety devices for 
public water systems are in place. 
5) A person knowledgeable of the chemlgation 
system and responsible for its operation, or under 
the supervision of the responsible person, shall 
shut the system down and make any necessary 
adjustments should the need arise. 
Equipment Requirements: 
1) Public water supply means a system for the 
provision to the public of piped water for human 
consumption if such system has at least 15 service 
connections or regularly serves an average of 25 
individuals daily at least 60 days throughout the 
year. 
2) Chemigation systems connected to the public 
water systems must contain a functional, reduced­
pressure zone (RPZ), backflow preventer or the 
functional equivalent in the water supply upstream 
from the point of pesticide introduction. As an 
option to the RPZ, the water from the public water 
system should be discharged into a reservoir tank 
prior to pesticide introduction. There shall be a 
complete physical break (air gap) between the 
outlet end of the fill pipe and the top of the overflow 
rim of the reservoir tank of at least twice the inside 
diameter of the fill pipe. 
3) The system must contain a functional check valve 
vacuum relief valve, and low pressure drai~ 
appropriately located on the irrigation pipeline to 
prevent water source contamination from back 
flow. 
4) The pesticide injection pipeline must contain a 
functional, automatic, quick closing check valve to 
prevent the flow of fluid back towards the injection 
pump. 
5) The pesticide injection pipeline must also contain a 
functional, normally closed, solenoid-operated 
valve located on the intake side of the injection 
pump and connected to the system interlock to 
prevent fluid from being withdrawn from the supply 
tank when the irrigation system is either 
automatically or manually shut down. 
6) The irrigation line or water pump must include a 
functional pressure switch which will stop the water 
pump motor when the water pressure decreases to 
the point where pesticide distribution is adversely 
affected. 
.7) The system must contain functional interlocking 
controls to automatically shut off the pesticide 
injection pump when the water pump motor stops 
or in cases where there is no water pump, when 
the water pressure decreases to the point where 
pesticide distribution is adversely affected. 
8) Systems must use a metering pump, such as a 
positive displacement injection pump (e.g., 
diaphragm pump), effectively designed and 
constructed of materials that are compatible with 
pesticides and capable of being filled with a 
system Interlock. 
9) Do not apply when wind speed favors drift beyond 
the area intended for treatment 
Application Instructions: 
1) Remove. scale, pesticide residues, and other 
foreign mailer from the chemical supply tank and 
entire injector system. Flush with clean water. 
Feilure to provide a clean tank, void of scale or 
residues may cause product to lose effectiVeness 
or strength. 
2) OonotcomPine Serenade Biofungicide Wettable 
Powder witf"i pestiCides, surfactants or fertilizers for 
appllc$tion thl"ough chemlgation equipment unless 
prior experience has shown the combination 
physically compatible, effective and non-injurious 
under conditions of use. Serenade Biofungicide 
Wellable Powder has not been fully evaluated for 
compatibility with all adjuvants or surfactants. It is 
advisable to conduct a spray compatibility test if 
mixture with adjuvants or surfactants is planned.

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label 50f36 
Center-pivot, Lateral Move, End Tow, and Traveler and the grower are responsible for considering all 
Irrigation Equipment (Use only with electric or oil these factors when making decisions. Where states 
hydraulic drive systems which provide a uniform have more stringent regulations, they should be 
water distribution): observed. Note: This section is advisory in nature and 
• Determine size of area to be treated. does not supersede the mandatory label requirements. 
• Determine the time required to apply no more than 
114 inch of water (6,750 gallons water per acre) 
over the area to be treated when the system and 
injection equipment are operated at normal 
pressures recommended by the equipment 
manufacturer. Run system at 80 to 95% of 
manufacturer's rated capacity. 
• Using only water, determine the injection pump 
output when operated at normal line pressure. 
• Determine the amount of Serenade Biofungicide 
Wettable Powder fungicide required to treat area. 
• Add required amount of Serenade Biofungicide 
Wettable Powder fungicide and suffjcient water to 
meet the injection time requirements of the solution 
tank. 
• 
• 
Maintain constant solution tank agitation during the 
injection period. 
Stop injection equipment after treatment is 
completed. Continue to operate the system until 
Serenade Biofungicide Wettable Powder fungicide 
solution has cleared the sprinkler head. 
Solid-set, Side (wheel) Roll, and Hand Move 
Irrigation Equipment: 
• Determine acreage covered by sprinkler. 
• Fill injector solution tank with water and adjust flow 
rate to use contents over a 10 to 30 minute 
interval. 
• 
• 
• 
• 
• 
• 
Determine the amount of Serenade Biofungicide 
Wettable Powder fungiCide required to treat area. 
Add the required amount of Serenade Biofungicide 
Wettable Powder fungicide into the same quantity 
of water used to calibrate the injection equipment. 
Maintain constant solution tank agitation during the 
injection period. 
Operate system at normal pressures 
recommended by the manufacturer of the injection 
equipment and used for the time interval 
established during calibration. 
Inject Serenade Biofungicide Wettable Powder 
fungicide at the end of the irrigation cycle or as a 
separate application to maximize foliar fungicide 
retention. 
Stop injection equipment after treatment is 
completed. Continue to operate the system until 
Serenade Biofungicide Wettable Powder fungicide 
solution has cleared the last sprinkler head. 
AERIAL DRIFT REDUCTION ADVISORY 
INFORMATION 
General: Avoiding spray drift at the application site is 
the responsibility of the applicator. The interaction of 
many equipment-and-weather-related factors 
determines the potential for spray drift. The applicator 
INFORMATION ON DROPLET SIZE: The most 
effective way to reduce drift potential is to apply large 
droplets. The best drift management strategy is to 
apply the largest droplets that provide sufficient 
coverage and control. Applying larger droplets 
reduces drift potential, but will not prevent drift if 
applications are made improperly, or under 
unfavorable environmental conditions (see Wind, 
Temperature and Humidity, and Temperature 
Inversions ). 
CONTROLLING DROPLET SIZE: Volume - Use high 
flow rate nozzles to apply the highest practical spray 
volume. Nozzles with higher rated flows produce 
larger droplets. Pressure -Do not exceed the nozzle 
manufacturer's recommended pressures. For many 
nozzle types lower pressure produces larger droplets. 
When high flow rates are needed, use higher flow rate 
nozzles instead of increasing pressure. # of Nozzles -
Use the minimum number of nozzles that provide 
uniform coverage. Nozzle Orientation - Orienting 
nozzles so that the spray is released parallel to the 
airstream produces larger droplets than other 
orientations and is the recommended practice. 
Significant deflection from horizontal will reduce droplet 
size and increase drift potential. Nozzle Type - Use a 
nozzle type that is designed for the intended 
application. With most nozzle types, narrower spray 
angles produce larger droplets. Consider using low­
drift no~les. Solid stream nozzles oriented straight 
back produce the largest droplets and the lowest drift. 
BOOM WIDTH: For aerial applications, the boom width 
must not exceed 75% of the wingspan or 90% of the 
rotary blade. Use upwind swath displacement and 
apply only when wind speed is 3 -- 10 mph as 
measured by an anemometer. Use medium or coarser 
spray according to ASAE 572 definition for standard 
nozzles or VMD for spinning atomizer nozzles. If 
application includes a no-spray zone, do not release 
spray at a height greater than 10 feet above the ground 
or the crop canopy. 
APPLICATION HEIGHT: Do not make application at a 
height greater than 10 feet above the top of the largest 
plants unless a greater height is required for aircraft 
safety. Making applications at the lowest height that is 
safe reduces exposure of droplets to evaporation and 
wind. 
SWATH ADJUSTMENT: When applications are made 
with a crosswind, the swath will be displaced 
downward. Therefore, on the up and downwind edges 
of the field, the applicator must compensate for this 
displacement by adjusting the path of the aircraft 
upwind. Swath adjustment distance should increase,

Revised 08 March 2007 Serenade Biofungicide Wettable Powder ......... ~~~!@~~~~~~~~~~~!:===u of36 with increasing drift potential (higher wind, smaller FOR SALE AND WARRANTY 
drops, etc.). AgraQuest warrants to those persons lawfully purchasing this 
WIND: Drift potential is lowest between wind speeds of 
2 - 10 mph. However, many factors, including droplet 
size and equipment type determine drift potential at 
any given speed. Application should be avoided below 
2 mph due to variable wind direction and high inversion 
potential. NOTE: Local terrain can influence wind 
patte ms. Every applicator should be familiar with local 
wind patterns and how they affect spray drift. 
TEMPERATURE AND HUMIDITY: When making 
applications in low relative humidity, set up equipment 
to produce larger droplets to compensate for 
evaporation. Droplet evaporation is most severe when 
conditions are both hot and dry. 
TEMPERATURE INVERSIONS: Do not apply during a 
temperature inversion because drift potential is high. 
Temperature inversions restrict vertical air mixing, 
which causes small, suspended droplets to remain in a 
concentrated cloud. This cloud can move in 
unpredictable directions due to the light variable winds 
common during inversions. Temperature inversions 
are characterized by increasing temperatures with 
altitude and are common on nights with limited cloud 
cover and light to no wind. They begin to form as tihe 
sun sets and often continue into the morning. Their 
presence can be indicated by ground fog; however, if 
fog is not present, inversions can also be identified by 
the movement of smoke from a ground source or an 
aircraft smoke generator. Smoke that layers and 
moves laterally in a concentrated cloud (under low 
wind conditions) indicates an inversion, while smoke 
that moves upward and rapidly dissipates indicates 
good vertical air mixing. 
SENSITIVE AREAS: The pesticide should only be 
applied when the potential for drift to adjacent sensitive 
areas (e.g, residential areas, bodies of water, known 
habitat for threatened or endangered species, non-target 
crops) is minimal (e.g. when wind Is blowing away from 
the sensitive areas), Do not allow spray to drift from tihe 
application site and contact people, structures people 
occupy at any time and the associated property, parks 
and recreation areas, non-target crops, aquatic and 
wetland areas, woodlands, pastures, rangelands, or 
animals. 
product that at the time of the first sale of this product by 
Seller that this product conformed to its description and was 
reasonably fit for the purposes stated on the label when used 
in accordance with Seller's directions. Buyers and users of 
this product assume the risk of any use contrary to such 
directions. EXCEPT AS PROVIDED ELSEWHERE IN 
WRITING CONTAINING AN EXPRESS REFERENCE TO 
THIS WARRANTY AND LIMITATION OF DAMAGES, 
SELLER MAKES NO OTHER EXPRESS OR IMPLIED 
WARRANTY OR GUARANTY, INCLUDING ANY OTHER 
EXPRESS OR IMPLIED WARRANTY OF FITNESS OR OF 
MERCHANTABILITY AND NO AGENT OF SELLER IS 
AUTHORIZED TO DO SO. Except to the extent prohibited 
by applicable law, AgraQuest offers this product with the 
following conditions: 1) buyers and users of this product 
assume the risk of any storage, handling or use contrary to 
Agr_Quest's label and directions and 2) AgraQuest's liability 
shall in no case exceed the purchase price of the applicable 
AgraQuest product. 
Serenade Biofungicide Wettable Powder· is a registered 
trademark of AgraQues!. 
~ Copyright AgraQuest, Inc., 2007 
Made In Mexico 
AgraQuest, Inc. 
1530 Drew Avenue 
Davis, California 95618 
www.agraquest.com

Revised 08 March 2007 Serenade ftiofungicide Wettable Powder Master Label page 7 of36 
Recommended Application Rates for Selected Crops - Agricultural Use 
Serenade Biofungicicle WP has a O-Day Pre Harvest Interval for all crops contained on this label 
Under moderate to severe di~ease pressure, for improved performance, increase rates and reduce spray intervals or 
use Serenade Biofungicide WP in a tank mix or rotational program with other registered fungicides. 
Crops Disease Rate Application Instructions 
Ibs.lacre· 
Artichoke Powdery Mildew Begin application when conditions are conducive to disease 
Leveillula taurio8, 2-6 development. Repeat on 7 to 10 day intervals or as needed. 
Erysiphe cichoracearum Serenade Biofungicide Wettable Powder may be applied up to and 
Gray Mold including the day of harvest. 
Botrytis spp. 
Bacterial Crown Rot 
Erwinia chrvsanthemi 
Asparagus Rust Begin application soon after emergence and when conditions are 
Puccinia asparagi 2-6 conducive to disease development. Repeat on 7 to 10 day intervals 
Botrytis Blight or as needed. Serenade Biofungicide Wettable Powder may be 
Botrytis cinerea applied up to and including the day of harvest. 
Bananas Sigatoka Begin application when leaves first appear and repeat on 7 to 21 day 
Plantains Mycosphaere/la spp. 2-6 intervals or as needed. The addition of an approved emulsifiable oil 
to spray solutions will improve performance. 
Berries Mummy Berry . Mummy Berry - For suppression, begin application at the bud break 
Monilinia vaccinii-corymbos; 2-6 stage of development and repeat on a 7 to 10 day interval or as 
Blueberry Anthracnose Fruit Rot needed. For improved performance, use Serenade Biofungicide 
Blackberry Col/eto/richum Wettable Powder in a tank mix or rotational program with other 
Raspberry gloeosporiodes registered fungicides for mummy berry control. 
Loganberry Col/etotriehum aeutatum 
Huckleberry Bacterial Canker - Apply before fall rains and again during 
Cranberry Botrytis Blight dormancy before spring growth. 
Gooseberry Botrytis cinerea 
Elderberry Leaf Rust For all other diseases - Begin application prior to disease 
Currant Pucciniastrum \faccinii development and repeat on a 7 to 10 day interval or as needed. For 
Caneberry Powdery Mildew improved performance of Serenade Biofungicide Wettable 
Bushberry Microsphaera Bini Powder, add a surfactant [such as Biotune] to the spray tank and other Sooty Mold to improve coverage. berry crops Misc. fungi 
Alternaria Fruit Rot 
Altemaria tenui$sima Cranberries - Make application to non-flooded fields only. Bacterial Canker 
Pseudomonas app. Serenade Blofunglclde Wettable Powder may be applied to fruit Downy Mildew up to arid Including the day of harvest. 
Peronospora sparsa 
Phomopsis 
Phomops;s v8ct;inii 
# Rate presented In Ibs.lacre unless otherwIse noted.

Reyised 08 March 2007 Serenade Biofungiclde Wettable Powder Master Label page 8 of36 
Recommended Application Rates for Selected Crops - Agricultural Use 
Serenade Biofungiclde WP has a O-Day PreHarvest Interval for all crops contained on this label 
Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or 
use Serenade Biofungicide WP in a tank mix or rotational program with other registered fungicides, 
Crops 
Brassica 
vegetables 
(Cole Crops) 
Broccoli 
Cabbage 
Cauliflower 
Brussels 
Sprouts 
Collards 
Kale 
Mustard 
Greens 
Kohlrabi 
and other 
Brassica 
crops 
Bulb 
Vegetables 
Onion 
Garlic 
Shallots 
and other 
bulb 
vegetables 
Disease 
Pin Rot Complex 
AlternarialXanthomonas 
Bacterial Leaf Spot 
Pseudomonas syringae 
Bacterial Soft Rot 
Erwinia / Pseudomonas 
Black Rot 
Xanthomonas campestris 
Xanthomonas Leaf Spot 
Xanthomonas campestris 
Alternaria Leaf Spot 
Altemaria spp. 
Anthracnose 
Colletotrichum 
higginsianum 
Cercospora Leaf Spot 
Cercospora brassicicola 
Downy Mildew 
Peronospora parasitica 
Peronospora spp. 
Powdery Mildew 
Erysiphe polygoni 
Southern Blight 
Sclerotium roltsii 
Botrytis Neck Rot 
Botrytis spp. 
Botrytls Leaf Blight 
Botrytis squamosa 
Onion Purple Blotch 
Altamaria parri 
Onion Downy Mildew 
Peronospora destructor 
Downy Mildew 
Peronospora spp. 
Powdery Mildew 
Erysiphe spp. 
White Rot 
Sclerotium cepivorum 
Rust 
Puccinia porri 
Rate Application Instructions 
Ibs.lacre' 
Pin Rot • For suppression, begin application when environmental 
2-6 conditions are conducive to disease development and repeat on 
7 to 10 day interval or as needed. For improved performance, use 
Serenade Biofungicide Wettable Powder in a tank mix or rotational 
programwitll other registered fungicides for pin rot control. 
For all other diseases a Begin application soon after emergence or 
transplant and when conditions are conducive to disease 
development. Repeat on a 7 to 10 day interval or as needed. 
Begin application -when environmental conditions are conducive to 
disease development and repeat on a 7 to 10 day interval or as 
needed. 
Apply sufficient water to provide complete coverage of plants. When 
2-6 conditions are conducive to rapid disease development, use 
Serenade Biofungicide Wettable Powder in a rotational program with 
other registered fungicides for Botrytis neck rot control. 
For suppression, begin application when conditions are conducive to 
2~ dis!I8se development and repeat on a 7 to 10 day interval or as 
needed. For improved performance, use Serenade Biofungicide 
Wettable Powder in a tank mix or rotational program with other 
reaistered funaicides for rust control. 
# Rate presented In Ibs.lacre unless otherwtse noted.

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label page 9 of36 
Recommended Application Rates for Selected Crops - Agricultural Use 
Serenade Biofunglcide WP has a O-Day PreHarvest Interval for ali crops contained on this label 
Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or 
use Serenade Biofungicide WP in a tank mix or rotational program with other registered fungicides, 
Crops Disease Rate Application Instructions 
Ibs.lacre· 
Cereal Grains Powdery Mildew Begin applications when environmental conditions and plant stage 
Erysiphe graminis are conducive to disease development. Repeat on 7 to 10 day 
Barley Rust intervals or as needed. Use higher rates and shorter application Com Pueeinia spp. 2-6 intervals under heavy disease pressure. Millets 
Oat Blast Rice 
Rye Pyrieularia oryzae 
Sorghum 
Triticale Sheath Spot and Blight 
Wheat Rhizoctonia oryzae 
and other Thanafephorus kernel 
cereal grain 
crops Smut 
TiJJetia bare/ayana 
Bacterial Blight and 
Streak 
Xanthomonas spp. 
Stem Rot 
Sclerotium oryzae 
Magnaporthe spp. 
Brown Rot, Leaf Spots 
and Smuts 
Cereospora spp. 
Entyloma spp. 
Dreschlera spp. 
Cochliobolus spp. 
Ceratobasidium spp. 
# Rate presented In Ibs.!acre unless otherwise noted.

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label page 10 of36 
Recommended Application Rates for Selected Crops - Agricultural Use 
Serenade Biofungicide WP has a O-Day Pre Harvest Interval for all crops contained on this label 
Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or 
use Serenade Biofungicide WP in a tank mix or rotational program with other registered fungicides. 
Crops 
Citrus 
Orange 
Grapefruit 
Lemon 
Tangerine 
Tangelo 
Pummelo 
and other citrus 
crops 
Coffee 
Corn 
Sweet Corn 
Popcorn 
Seed Corn 
Silage Corn 
Field Com 
and other corn 
crops 
Disease 
Greasy spot 
Mycosphaerella citri 
Post Bloom Fruit Drop 
Colletotrichum acutatum 
Scab 
Elsinoe faweetti 
Melanose 
Diaporthe citri 
Alternaria Leaf Spot 
Altemaria altemata 
Bacterial Blast 
Pseudomonas syringae 
Coffee Berry Disease 
Colletotriehum coffeanum 
Bacterial Blight 
Pseudomonas syringee 
Common rust 
Puceinia sorghi 
Northern Leaf Blight 
Exserohilum turcicum 
Helminthosporium turcium 
Southern Leaf Blight 
Bipolaris maydis 
He/minthosporium maydi 
Cochliobolus 
heterostrophus 
Rate 
Ibs.lacre· 
2-6 
2- 6 
2-6 
# Rate presented In IbsJacre unless othelWlse noted. 
Application Instructions 
Greasy spot - For suppression, begin applications at first new foliar 
flush, and repeat with subsequent new flushes. When conditions are 
conducive to rapid disease development, Serenade Biofungicide 
Wettable Powder must be used in a tank mix program with other 
registered products, such as spray oil or copper- based fungiCides, at 
labeled rates. 
Post bloom fruit drop - For suppression, begin applications at early 
bloom and when conditions are conducive to disease development. 
Repeat on a 7 to 10 day interval or as needed. Utilize the shorter 
spray interval between applications if warm, wet conditions persist. 
Citrus scab - For suppression, begin applications at first new foliar 
flush and repeat at petal fall and at Y, inch diameter fruit. 
Melanose - For suppression, begin applications at petal fall and 
repeat on a 14 to 21 day interval until fruit becomes resistant 
Alternaria Leaf Spot - Begin applications when environmental 
conditions and plant stage are conducive to disease development. 
Repeat on 7 to 10 day intervals or as needed. 
Bacterial Blast- Begin applications when environmental conditions 
are conducive to disease development. Repeat on 7 to 10 day 
intervals or as needed. 
For improved performance on post bloom fruit drop, scab and 
Melanose, use Serenade Biofungicide Wettable Powder in a tank mix 
or rotational program with other registered fungicides. 
Begin applications when environmental conditions are conducive to 
disease development. Continue applications on 7 to 10 day intervals 
or as needed. Use higher rates and shorter application intervals under 
heavy disease pressure. 
For improved performance use Serenade Biofungicide Weltable 
Powder in a tank mix or rotational program with other registered 
fungicides 
Begin applications when environmental conditions are conducive to 
disease development. Continue applications on 7 to 10 day intervals 
or as needed. Use higher rates and shorter application intervals under 
heavy disease pressure.

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label page 11 006 
Recommended Application Rates for Selected Crops - Agricultural Use 
Serenade Biofungicide WP has a D-Day PreHarvest Interval for all crops contained on this label 
Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or 
use Serenade Biofungicide WP in a tank mix or rotational program with other registered fungicides, 
Crops Disease Rate Application Instructions 
Ibs.lacre· 
Cucurblts Powdery Mildew Begin application soon after emergence or transplant and when 
Erysiphe spp. 2-6 conditions are conducive to disease development. Repeat on 
Cucumber Sphaerotheca spp. 7 to 10 day interval or as needed. When environmental 
Cantaloupe Gummy Stem Blight conditions and plant stage are conducive to rapid disease 
Melon Didymella bryoniae development, use Serenade Biofungicide Wettable Powder in Muskmelon Phoma cucurbifacearum a rotational program with other registered fungicides. Squash Angular Leaf Spot 
Watermelon Pseudomonas syringae 
and other Anthracnose 
cucurbit crops Colletotrichum 
lagenarium 
Downy Mildew 
P seudoperonospora 
cubensis 
Bacterial Fruit Blotch 
Acidovorax avenae 
Fruiting Bacterial Spot Begin application soon after emergence or transplant and when 
Vegetables Xanthomonas spp. 2-6 environmental conditions are conducive to disease development. 
Target Spot Continue applications on a 5 to 7 day interval or as needed. When 
Pepper Corynespora cassliicola conditions are conducive to rapid disease deveklpment, for improved 
Tomato control, use Serenade Biofungicide Wettable Powder in a tank mix 
Eggplant program with copper-based bactericides registered for control of 
Ground Cherry bacterial sDOt at labeled rates. 
Tomatillo Bacterial Canker 2-6 Begin applications When environmental conditions are conducive to 
Okra Clavibacter disease development. Repeat on 7 to 10 day intervals or as needed. 
and other michiganensis 
fruiting Buck-eye Rot 2-6 Begin application soon after emergence or transplant and continue on vegetables Phytophthora parasitica a 7 to 10 day interval or as needed. For improved perfonnance of 
Anthracnose Serenade Biofungicide Wettable Powder add a surfactant [such as 
Col/etotrichum candidum Blotunel to the sorey tank to improve coverage. 
Bacterial Speck 2-6 Begin application soon after emergence or transplant and when 
Pseudomonas syringae environmental conditions are conducive to disease development. 
pvtomato Continue appHcations on a 5 to 7 day interval or as needed. Use 
higher rates when conditions are conducive to rapid disease 
development. 
Early Blight For suppression, begin application when plants are 4 to 6 inches high. 
Altemaria solani 2-6 Repeat applications on a 5 to 7 day interval or as needed. For 
improved perfonnance, use Serenade Biofungicide Wettable Powder 
Late Blight-suppression in a tank mix or rotational program with other registered fungicides for 
Phytophthora infestans lale blight control. Use shorter spray intervals under conditions 
conducive to rapid disease development. 
Powdery Mildew FOr suppression, begin appiiclltion soon after emergence or transplant 
Leveillula taurica 2-6 and continue on a 7 to 10 day interval or as needed, For improved 
Oidiopsis faurica performance, use Serenade Biofungicide Wettable Powder in a tank 
Erysiphe spp. mix or rotational program w"h other registered fungicides for powdery 
Sphaerotheca spp. mildew control. 
Downy Mildew 
Pseudoperonospera 
cubensis 
Gray Mold Begin application soon after emergence or transplant and repeat on a 
Botrytis cinerea 2-6 7 to 10 day interval or as needed. 
# Rate presented In Ibs.lacre unless otherwise noted.

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label page 12 of 36 
Recommended Application Rates for Selected Crops - Agricultural Use 
Serenade Biofungicide WP has a O-Day PreHarvest Interval for all crops contained on this label 
Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or 
use Serena d B' f 'd WP k' . I I h h . d f "d e 10 unaici e in a tan mix or rotatlona program w t ot er registers unglCI es. 
Crops Disease Rate Application Instructions 
Ibs./acre· 
Grape Gray Mold Begin application at bloom, before bunch closure, at verasion and 
Botrytis cinerea preharvest. 
Sour Rot 2-6 
[a complex of pathogens Serenade Biofungicide Wettable Powder may be applied to fruit up to 
Aspergillus niger, and including the day of harvest. 
Alternaria tenuis, Botrytis 
cinerea, Cladosporium 
herbarum, Rhizopus 
arrhizus, Penicillium sp., 
and others] 
Powdery Mildew Begin application when new shoots are Yr to 1 %- inches long. 
Uncinula necator 2-6 Repeat when shoots are 3 to 5 inches long, when shoots are 8 to 10 
inches long and then at 7 to 10 day intervals until disease conditions 
no longer exist. 
Downy Mildew For suppression, apply at 10 inch shoot. then at 7-10 day intervals 
Plasmopara viticoJa 2-6 until bunch closure (berry touch). For improved performance, use 
Serenade Biofungicide Wettable Powder in a tank mix or rotational 
I program with other reaistered funQicides for downy mildew control. 
Black Rot 2-6 Begin applications when shoots are 4 to 6 inches in length and repeat 
Guignardia bidwelli on 7-10 day intervals throughout the season until the berries start to 
change color. 
Phomopsis 2-6 Begin applications when shoots are Y, to 1 inch long and repeat when 
Phomopsis vitica!a shoots are 6-8 inches long. 
Eutypha 2·5% Apply solution to pruning wound •. Sanitation is critical. All wood 
Eulypha lala from infected plants must be removed from the vineyard and 
destroyed (eijher buried or burned). 
Herbsl Spices Bacterial Blight Begin application when environmental conditions are conducive to 
Pseudomonas syringae 2-6 disease development. Repeat on 7 to 10 day interval or as needed. 
Anthracnose 
Collelolrichum spp. 
Alternaria Leaf Blight 
Alternaria spp. 
Botrytis 
Bolrytis spp. 
# Rate presented In Ibs./acre unless otherwise noted.

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label page 13 of 36 
Recommended Application Rates for Selected Crops - Agricultural Use 
Serenade Biofungicide WP has a O·Day Pre Harvest Interval for all crops contained on this label 
Under moderate to severe disease pressure, for improved performance .. increase rates and reduce spray intervals or 
use Serenade Biofungicide WP in a tank mix or rotational program with other registered fungicides. 
Crops 
Hop 
Disease 
Powdery Mildew 
Sphaerotheca macularis 
Downy Mildew 
Peronospora spp. 
# NOTE CHANGE IN RATE 
Rate • 
Ibs.l100 gal 
4-6 Ib • .!100 
gal 
Application Instructions 
Use the higher rates when moderate to high disease pressure is 
present or expected. 
Begin applications when environmental conditions are conducive to 
rapid disease development. Continue sprays at 7 day intervals or as 
needed. Apply at a rate of 4·6 Ibs. per 100 gallons of water using 
ground equipment. 
Minimum spray volume recommendations for hop growth stages are 
as follows: 
Emergence to training: Use 4·6 Ibs. of product per 100 gallons of 
water. Apply using a minimum spray volume of 20 gallons per acre. 
Coverage will vary with the size of the vines and the type of spray 
equipment. Apply adequate spray volume to achieve complete spray 
coverage. 
Training to wire: Use 4-6 Ibs. of product per 100 gallons of water. 
Apply using a minimum spray volume of 50 gal/ons per acre. 
Coverage will vary with the size of the vines and the type of spray 
equipment. Apply adequate spray volume to achieve complete spray 
coverage. 
Wire touch through harvest: Use 4-6 Ibs. of product per acre. 
Apply in a minimum spray volume of 100 gallons per acre. Higher 
water volumes may be necessary to achieve thorough coverage after 
side arms develop. Apply adequate spray volume to achieve complete 
spray coverage.

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label page 14 of36 
Recommended Application Rates for Selected Crops - Agricultural Use 
Serenade Biofungicide WP has a O-Day PreHarvest Interval for all crops contained on this label 
Under moderate to severe disease pressure, for improved peliormance, increase rates and reduce spray intervals or 
use Serenade Biofungicide WP in a tank mix or rotational Droaram with other reaistered funaicides. 
Crops Disea~e 
Leafy 
Vegetables 
Lettuce 
Celery 
Spinach 
Parsley 
Radicchio and 
other leafy 
vegetable 
crops 
Downy Mildew 
Bremia lactucae 
Peronospora spp. 
Powdery Mildew 
Erysiphe cichoracearum 
Pink Rot 
Sclerotinia sclerotiorum 
Anthracnose 
Colletotrichum spp. 
Bacterial Blight 
Xanthomonas campestris 
Bacterial Leaf Spot 
Xanthomonas 
campestris pv. vitians 
Sclerotinia Head and 
Leaf Drop 
Sc/erotinia spp. 
Rate Application Instructions 
Ibs./acre# 
2~ 
2~ 
Pink rot Begin application approximately 8 weeks before harvest 
and repeat on a 14 day interval. Apply Serenade Biofungicide 
Wettable Powder as a directed spray in sufficient water to ensure 
thorough coverage of the base of the plants and the surrounding soil 
surface. Light irrigation following application to incorporate Serenade 
Biofungicide Wettable Powder may improve disease control. 
Downy mildew I powdery mildew - For suppression, begin 
application when conditions are conducive to disease development 
and repeat on 7 to 10 day intervals or as needed, For improved 
performance, use Serenade Biofungicide Wettable Powder a tank mix 
or rotational program with other registered fungicides for downy 
mildew and powdery mildew control. 
Anthracnose· Begin application prior to disease development when 
environmental conditions and plant stage are conducive to rapid 
disease development and repeat on a day 7 to 10 day interval or as 
needed. Use higher rates and shorter application intervals under 
heavy disease pressure. 
Bacterial Blight/Bacterial Leaf Spot 
~ Begin applications when environmental conditions are conducive to 
disease development. Receat on 7 to 10 day intelVals or as needed. 
For control of earty Sclerollnla head and leaf drop: Apply at 
planting or immediately following planting but prior to crop emergence 
as a 4 to 6 inch seed line treatment Make a second application as a 
directed spray with multip'e nozzles per each seed line in sufficient 
water to ensure thorough coverage of lower plant leaves and 
surrounding soil surface within 7 days of thinning, Repeat applications 
on 10 to 14 day intervals if conditions for disease development 
persist. Use higher rates under conditions conducive to moderate to 
severe disease pressure. Light irrigation after application to 
incorporate the product may improve disease control. 
OR 
For control of 'cleraiinia head and leaf drop: Apply as a directed 
spray with multiple nozzles per each seed line in sufficient water to 
ensure thorough coverage of lower plant leaves and surrounding soil 
surface within 7 days of thinning or transplanting. Repeat applications 
on 10 to 14 day intervals ff conditions for disease development 
persist. Use higher rates under conditions conducive to moderate to 
severe disease pressure. Light irrigation after application to 
incorporate the product may improve disease control. 
# Rate presented In Ibs./acre unless otherwise noted,

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label page 15 006 
Recommended Application Rates for Selected Crops - Agricultural Use 
Serenade Biofungicide WP has a O-Day PreHarvest Interval for all crops contained on this label 
Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or 
use 5 d B' f "d WP' t k' tt'l ith th 't d f "d erena e 10 unglCI e In a an mix or ro a lanai program w 0 er regis ere ungici es. 
Crops Disease Rate Application Instructions 
Ibs.lacre· 
Legumesl Rust For suppression, begin application soon after emergence or 
Vegetables Uromyces appendicu/atus 2-6 transplant and when conditions are conducive to disease 
(succulent development. Repeat on 7 to 10 day intervals or as needed, When 
and dried conditions are conducive to disease development, for improved 
beans and performance, use Serenade Biofungicide Wettable Powder in a tank 
peas) mix or rotational program with other registered fungicides. 
Beans Rust Begin applications when environmental conditions and plant stage are 
Green beans Puccinia spp. 2-6 conducive to disease development. Repeat on 7 to 10 day intervals 
Snap beans Bacterial Pustule or as needed. Use higher rates and shorter application intervals 
Shell beans XBnthomonBS spp. under heavy disease pressure. 
Soybeans Powdery Mildew 
Dry Beans Erysiphe spp. 
Garbanzo Downy Mildew 
beans Peronospora mansherica 
Lima beans 
Peas 
Chick peas Asian Soybean Rust 2-6 Use as part of a program with other fungicides labeled for Asian 
Split peas Phakospora pachyrhizi Soybean Rust. Begin applications when environmental conditions are 
Lentils conducive to disease development. Continue at 7 to 14 day intervals 
And other or as needed. Use. higher rates and shorter application intervals 
legume/ under heavy disease pressure. 
Vegetable 
crops 
Aphonomyces spp, Begin application soon after emergence or transplant and when 
2-6 conditions are conducive to disease development. Repeat on a 7 to 
10 day interval or as needed. 
White Mold Begin application soon after emergence or transplant and when 
Sclerotinia sclerotiorum 2-6 conditions are conducive to disease development. Repeat on 7 to 10 
day inteNals or as needed. When conditions are conducive to rapid 
Gray Mold (Botrytis Blight) disease development use Serenade Biofungicide Wettable Powder in 
Botrytis spp. a rotational program with other registered fungicides. 
Mint Rust Begin application soon after emergence and when conditions are 
And other Puccinia menthae 2-6 conducive to disease development. Repeat on 7 to 10 day intervals 
herb/spices Powdery Mildew or as needed. Use higher rates and shorter application intervals 
Erysiphe spp, under heavy disease pressure. 
Downy Mildew 
Peronospora spp. 
# Rate presented in ibs.lacre unless otherwise noted.

Revised 08 March 8, 2007 SERENADE®Biofungicide Wettable Powder MASTER LABEL paRe 16 of 36 
Recommended Application Selected Crops - Agricultural Use 
Serenade Biofungicide WP has a O-Day Pre Harvest Interval for all crops contained on this label 
Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or 
use Serenade Biofwngiclde WP in a tank mix or rotational program with other registered fungicides. 
Crops Disease Rate 
Ibs.lacre· 
Application Instructions 
Oil Seed Bacterial Speck Begin application soon after emergence and when conditions are 
Crops Pseudomonas syringe 2-6 conducive to disease development. Repeat on 7 to 10 day intervals 
pv. glycinea or as needed. Use higher rates and shorter application intervals 
Canala Brawn Spot under heavy disease pressure. 
Castor Septoria glycines 
Coconut Cotton Pod and Stem Blight Flax Diapor/he phaseolorum Oil Palm 
Olive var.sojae 
Peanut Phomopsis longicola 
Rapeseed Downy Mildew 
Safflower Peronospora mansherica 
Sesame Ru~t 
Sunflower White Mold (Sclerotinia 
Soybeans Stem Rot) 
and other Sclerotinia sclerotiorum 
oilseed crops Bac:terial Pustule 
Xanthomonas spp. 
Asian Soybean Rust 2-6 Use as part of a program with other fungicides labeled for Asian 
Phakospora pachyrhizi Soybean Rust. Begin applications when environmental conditions are 
conducive to disease development. Continue at 7 to 14 day intervals 
or as needed. Use higher rates and shorter application intervals 
under heavy disease pressure. 
Olive Olive Knot Apply before fall rains and again during dormancy before spring 
Pseudomonas savastanoi 2-6 growth. For improved control, under conditions conducive to heavy 
Leaf Spot disease pressure, use Serenade Biofungicide Wettable Powder in a 
Cercospora tank-mix or rotational program with a copper-based bactericide 
c/adosporioides registered for control of olive knot. In cool, wet areas, apply 
preventive treatments to olive trees after harvest but before winter 
rains baain and aaain in sorina if wet, rainv weather oersists. 
Peanut Early Leaf Spot Begin application when environmental conditions are conducive to 
Cercospora spp. 2-6 disease development. Repeat applications on 14 day intervals or as 
Cercospora arachidicola needed. For improved control, use Serenade Biofungicide Wettable 
Late Leaf Spot Powder in a tank mix program with copper-based fungicides 
Cercosporidium registered for control of peanut leaf spot at labeled rates. Peanut 
pensonatum hay may be fed to livestock. 
Rust 
Put;cinia arachidis 
White Mold 
Sclerotinia sclerotiorum 
Web Blotch 
Phoma arachidicola 
# Rate presented in Ibs./acre unless otherwise noted.

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label page 17 of36 
Recommended Application Rates for Selected Crops - Agricultural Use 
Serenade Biofungiclde WP has a O-Day PreHarvest Interval for a" crops contained on this label 
Under moderate to severe disease pressure, for improved performance, Increase rates and reduce spray intervals or 
use Serenade Biofungicide WP in a tank mix or rotational program with other registered fungicides. 
Crops Disease 
Pome Fruit 
Apple 
Crabapple 
Pear 
Quince 
Mayhaw 
and other 
porne fruit 
Fire Blight 
Erwinia amy/ovora 
Scab 
Venturia spp. 
Brooks Spot 
Mycosphaerella pomi 
Cedar Apple Rust 
Gymnosporangium 
juniperi-virginianae 
Flyspeck 
Schizolhyrium pomi 
Sooty Blotch 
G/oeodes pomigena 
Bot Rot 
Bolryosphaeria 
dotllidea 
Bitter Rot 
Collelolrichum spp. 
Powdery Mildew 
Podosphaera leuco/richa 
Rate Application Instructions 
Ibs.lacre" 
2-6 
2-6 
2-6 
2-6 
For suppression begin application at 1 5% bloom and repeat as 
necessary to protect open, untreated blossoms when conditions 
favoring disease development are likely to occur. For maximum 
control, use Serenade Blofunglclde Wettable Powder prior to and as 
close as possible to fire blight infection events. During periods of rapid 
bloom development and frequent infection periods, spray intervals of 3 
to 7 days may be required. After petal fall, continue applications on a 
7 day interval while environmental conditions favor disease 
development. 
Apply in sufficient water to provide full coverage. For improved 
performance, use Serenade Biofungicide Wettable Powder in a 
rotational program with antibiotics registered for fire blight control such 
as but not limited to oxytetracycline or streptomycin. 
Proper orchard cultural practices are essential to eliminate fire blight· 
infected tissue from the orchard to assure good performance of any 
crop protection product. Care must be taken to remove and destroy 
dead and diseased wood from the orchard prior to and during the 
growing season. 
Use of Serenade Biofungicide Wettable Powder alone has not been 
shown to affect fruit finish. Use caution when selecting spray 
adjuvants. Select only those adjuvants which through prior experience 
do not affect fruit finish when combined with Serenade Blofungicide 
Wettable Powder. 
For suppression, begin application at green tip or when environmental 
conditions become favorable for primary scab development and repeat 
on a 7 to 10 day Interval or as needed. When environmental 
conditions are conducive to rapid disease development, for improved 
performance, use Serenade Biofungicide Wettable Powder in a tank 
mix or rotational program with other registered fungicides for scab 
control. 
For control of Brooks Spot, Cedar Apple Rust, Flyspeck 
Sooty Blotch, Bot Rot and Bitter Rot: Begin applications pre­
bloom when environmental conditions are conducive to disease 
development. Repeat applications at 7 to 14 day intervals or as 
needed. Apply in sufficient spray volume to ensure thorough 
coverage. Use higher application rates and shorter spray 
intervals when conditions are conducive to rapid disease 
development or heavy disease pressure. For improved 
performance of Serenade Biofunglcide Wetlable Powder add a 
surfactant [such as Blotune® Adjuvant], known to be safe to the 
target crop, to the spray tank to Improve coverage and wetllng 
of plant surfaces. Serenade Biofungicide Wetlable Powder 
may be applied up to and Including the day of harvest (O-day 
PHi). 
Begin application at tight cluster, or sooner, if conditions are conducive 
to disease development. Repeat applications through the second 
cover spray on a 7 to 10 day Interval. Additional sprays beyond 
second cover may be needed on. susceptibJe varieties or when 
environmental conditions are conducive to rapid disease development. 
Use high label rate and shorter spray intervals when conditions are 
conducive to rapid disease development. 
# Rate presented In Ibs.lacre unless otherwise noted.

;;0 13~ 
Revis£d 08 March 2007 Serenade Biofungicide Wettable Powder Master Label page 18 of 36 
Recommended Application Rates for Selected Crops - Agricultural Use 
Serenade Biofungicide WP has a O-Day PreHarvest Interval for all crops contained on this label 
Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or 
use Serenade Biofungicide WP I . h h . d I ··d in a tank mix or rotational proqram Wit at er re~ustere unqlci es. 
Crops Disease Rate Application Instructions 
Ibs.lacre· 
Root I Tuber Black Roll Begin application soon after emergence or transplant and when 
and Corm Black Crown Rot 2-6 conditions are conducive to disease development. Repeat on a 7 to 
Vegetables Alternaria spp. 10 day interval or as needed. Use high rates and shorter intervals 
Alternaria Leaf Blight when conditions are conducive to rapid disease development. Apply 
Carrot Alternaria dauci in sufficient water to provide thorough coverage. 
Potato Bacterial Leal Spot 
Sweet Potato Xanthomonas 
Beets campestris av. carotae 
Ginger Bacterial Leal Blight Begin application soon after emergence or transplant and when 
Horseradish Xanthomonas 2-6 conditions are conducive to disease development. Repeat on a 7 to 
Radish campestris 10 day interval or as needed. Use high rates and shorter intervals 
Ginseng Downy Mildew when conditions are conducive to rapid disease development. 
Turnip and Peronospora spp. Apply in sufficient water to provide thorough coverage. other root! Powdery Mildew 
tuber and corm Erysiphe spp. 
crops White Mold 
Sclerotinia sclerotiorum 
Gray Mold 
Boirytis spp. 
For suppression, begin application soon after emergence and when 
Early Blight 2-6 conditions are conducive to disease development. Repeat on a 5 to 7 
Alternaria solani day interval or as needed. For improved performance, use Serenade 
Late Blight - Biofungiclde Wettable Powder in a tank mix or rotational program with 
suppression other registered fungicides for late blight control. 
Phytophthora infestans 
Roses, Field Powdery Mildew Begin applications when environmental conditions and plant stage are 
Sphaerotheca spp. 2-6 conducive to disease development. Continue applications on 
Rust 7 to 14 day intervals or as needed. Use higher rates and shorter 
Puccinia spp. application intervals under heavy disease pressure. 
# Rate presented In Ibs.lacre unless otherwise noted.

dl\~~ 
Revised 08 March 8, 2007 SERENADE® Biofungicide Wettable Powder MASTER LABEL page 19 of 36 
Recommended Application Selected Crops - Agricultural Use 
Serenade Biofungicide WP has a O-Day PreHarvest Interval for all crops contained on this label 
Under moderate to sevete disease pressure, for improved pertormance, increase rates and reduce spray intelVals or 
use Serenade Biofungicide WP in a tank mix or rotational program with other registered fungicides. 
Crops 
Stone Fruit 
Apricot 
Cherry 
Nectarine 
Peach 
Plum 
Prune 
And other 
stone fruit 
crops 
. 
Disease 
Anthracnose 
Col/etotrichum spp. 
Powdery Mildew 
Sphaerotheca parnnOSB 
Podosphaera 
clandestine 
Podosphaera spp. 
Rusty Spot 
Podosphaera leucotricha 
Bacterial Canker 
Pseudomonas spp. 
Alternaria Spot I Fruit 
Rot 
Alternaria alternate 
Scab 
Cladosporium 
carpoph;Jum 
Brown Rot Blossom 
Blight 
Monilinia laxa 
Fruit Brown Rot 
Monilinia fruticola 
Gray mold 
Botrytis cinerea 
Shot Hole 
Wilsonomyces 
carpophilus 
Xanthomonas pruni 
BhumerielJa gaapi 
CercospOra spp. 
Bacterial Leaf Spot! 
Bacterial Spot 
Xanthomonas arboricola 
Rate Application Instructions 
IbsJacre" 
Brown Rot Blossom Blight - Begin application at early bloom and 
2-6 repeat through petal fall on a 7 day interval or as needed. 
Scab - Begin application at petal fall and repeat on a 7 to 10 day 
interval or as needed. 
Bacterial Blight - Apply post harvest before fall rains and again 
during dormancy before spring growth. 
Powdery Mildew - For suppression, begin application at popcorn 
stage and repeat on a 7 day interval or as needed. For improved 
performance, use Serenade Biofungicide Wettable Powder in a tank 
mix or rotational program with other registered fungicides for powdery 
mildew control . 
For all other diseases - Begin application prior to disease 
development when environmental conditions and plant stage are 
conducive to rapid disease development and repeat on a 7 to 10 day 
interval or as needed. 
Post harvest disease protection - To aid in the control of post 
harvest infections of Botrytis and Monilinia apply Serenade 
Biofungicide Wettable Powder prior to harvest with sufficient water to 
thoroughly cover fruit. Apply on a 7 day schedule or as needed up 
until the time of harvest. 
Bacterial Leaf Spot! Bacterial Spot- Begin applications at bud break 
and c0ntinue on a 7 to 14 day schedule or, as needed until harvest. 
During periods of rapid disease development and frequent infection 
periods, use Serenade Biofungicide Wettable Powder in a program 
with other registered antibiotics and/or copper bactericides. For the 
improved performance of Serenade Biofungicide Wettable Powder, 
add a surfactant [such as Biotune] to the spray tank to improve 
coverage. 
Serenade Biofungicide Wettable Powder may be applied to fruit up to 
and including the day of harvest. 
# Rate presented In Ibs.lacre unless otherwise noted.

Revised 08 March 8,2007 SERENADE® Biofungicide Wettable Powder MASTER LABEL page 20 of 36 
Recommended Application Selected Crops - Agricultural Use 
Serenade Biofungicide WP has a O-Day PreHarvest Interval for all crops contained on this label 
Under moderate to severe disease pressure, for improved pertormance, increase rates and reduce spray intervals or 
use Serenade Biofungicide WP in a tank mix or rotational program with other registered fungicides. 
Crops 
Strawberry 
Sugar Beets 
Tobacco 
Tree Nuts 
Almond 
Pistachio 
Pecan 
Walnut 
Filberts 
Chestnut 
Cashew 
Beechnut 
Butternut 
And other 
tree nut 
crops 
Disease 
Powdery Mildew 
Sphaerotheea macularis 
Erysiphe spp. 
Anthracnose 
Colletotrichum acutatum 
Botrytis 
Botrytis cinerea 
Gray Mold 
Botrytis spp. 
Angular Leaf Spot 
Xanthomonas 
fragariae 
Powdery Mildew 
Erysiphe betae 
Erysiphe polygoni 
Leaf Spot 
Cercospora betieola 
Ramularia 
Ramularia spp. 
Rust 
Uromyces betae 
Blue Mold 
Peronospora hyoscyami 
Walnut Blight 
Xanthomonas eampestris 
Alternaria Leaf Spot 
Alternaria alternata 
Anthracnose 
Colletotrichum acutatum 
Bacterial Canker 
Pseudomonas syringae 
Scab 
Cladosporium 
earpophilum 
Botryosphaerla Blight 
Botryosphaeria dothidea 
Shot Hole 
Wilsonomyees 
carpophilus 
Xanthomonas pruni 
Bhumeriella gaapi 
Cercospora spp. 
Brown Rot 
Monilinia spp. 
Pecan Scab 
Cladosporium caryigenum 
Rate 
Ibs.facre' 
2-6 
2-6 
2- 6 
2-6 
Application Instructions 
Botrytis/Powdery mildew - For suppression, begin application at or 
before flowering and repeat on 7 to 10 day intervals or as needed 
through harvest. Use higher rates and shorter application intervals under 
heavy disease pressure. For improved performance, use Serenade 
Biofungicide Wettable Powder in a tank mix or rotational program with 
other registered fungicides for powdery mildew and botrytis control. 
Anthracnose - Begin application prior to disease development and 
repeat on 7 to 10 day intervals or as needed. Use higher rates and 
shorter application intervals under heavy disease pressure. For improved 
performance, use Serenade Biofungicide Wettable Powder in a tank mix 
or rotational program with other registered fungicides. 
Angular Leaf Spot - Begin applications when environmental conditions 
are conducive to disease development. Continue applications on 7 to 10 
day intervals or as needed. Use higher rates and shorter appfication 
intervals under heavy disease pressure. For improved peliormance, use 
Serenade Biofungicide Wettable Powder in a tank mix or rotational 
program with other registered fungicides. Thorough coverage is essential. 
Serenade Biofungicide Wettable Powder may be applied up to and 
including the day of harvest. 
Begin applications when environmental conditions are conducive to 
disease development. Continue applications on 7 to 10 day intervals or 
as needed. Use higher rates and shorter application intervals under heavy 
disease pressure. 
Begin applications when conditions 
development. Continue applications on 
needed. 
are conducive to disease 
7 to 10 day intervals or as 
Walnut Blight - Begin application no later than pistillate bloom and repeat 
on 7 to 10 day intervals or as needed. Apply in advance of rain for 
maximum protection. When conditions are conducive'to rapid disease 
development, for improved control, use Serenade Biofungicide Wettable 
Powder in a tank-mix or rotational program with a copper-based 
bactericide registered for control of walnut blight. 
For all other diseases - Begin application prior to disease development 
and repeat on 7 to 10 day intervals or as needed. 
# Rate presented In Ibs.lacre unless otherwise noted.

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label page 21 of 36 
Recommended Application Rates for Selected Crops - Agricultural Use 
Serenade Biofungicide WP has a O-Day PreHarvest Interval for all crops contained on this label 
Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or 
use Serenade Biofungicide WP . I I h h . d f ··d In a tank mix or rotationa IJ~.r()B!am w t ot er re~:lIstere unalCI es. 
Crops Disease Rate Application Instructions 
Ibs.lacre' 
Anthracnose Avocado/Mango - Begin application at budbreak and repeat on a 14 
Tropical Colletotrichum 2-6 to 21 day interval or as needed through harvest. 
Fruits gloeosporioides 
Avocado Colletotrichum ananas Papaya/Pineapple - Begin application at flowering and repeat on a 14 
Mango 
Bacterial Canker 
to 21 day interval or as needed through harvest. 
Papaya 
Bananas Xanthomonas campestris Bacterial Canker - Begin applications when environmental conditions 
Plantains are conducive to disease development. 
Pineapple Scab Repeat on 7 to 10 day intervals or as needed. 
And other Sphaceloma perseae 
Tropical Fruits Serenade Biofungicide Wettable Powder may be applied to fruit up to 
and including the day of harvest. 
Sigatoka 2- 6 Begin application when leaves first appear and repeat on a 7 to 21 day 
Mycosphaerella interval or as needed. Apply in sufficient water to obtain thorough 
fijiensis. coverage of foliage. For improved disease control, Serenade 
Biofungicide Wettable Powder may be tank-mixed with oil or other 
fungicides registered for control of Sigatoka at labeled rates. When 
conditions are conducive to rapid disease development and/or heavy 
disease pressure, higher application rates and rotational spray 
programs with other fungicides registered for control of Sigatoka are 
recommended. 
Botrytis Fruit Rot Kiwi - Begin application at early bloom and repeat on 7 to 10 day 
Kiwi Botrytis cinerea 2-6 intervals or as needed. Serenade Biofungicide Wettable Powder may 
Bacterial Blight be applied to fruit up to and including the day of harvest. 
Pseudomonas viridiflava 
Pseudomonas syringae 
Sclerotinia 
Sclerotinia sclerotiorum 
Watercress Cercospora leaf spot Begin applications when conditions are conducive to disease 
Cercospora spp. 2-6 development. Continue applications on 7 to 10 day intervals or as 
needed. 
. 
Seed Powdery Mildew Begin applications when environmental conditions and plant stage are 
Production Erysiphe spp. 2-6 conducive to disease development. Repeat on 7 to 10 day intervals 
Crops Rust or as needed. Use higher rates and shorter application intervals under 
blue grass Puccinia spp. heavy disease pressure. 
rye grass 
fescue 
orchard grass 
and other 
crops grown 
to produce 
seeds 
# Rate presented In Ibs.lacre unless otherwise noted.

Revised 08 March 2007 SERENADE® Biofungicide Wettable Powder MASTER LABELpage 22 of 36 
Recommended Application Selected Greenhouse Crops 
Serenade Biofunglcide WP has a O-Day PreHarvest Interval for all crops contained on this label 
Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or 
use Serenade Biofungicide WP in a tank mix or rotational program with other registered fungicides. 
Green­
house 
Crops 
Brassica 
Broccoli 
Cabbage 
Cauliflower 
Brussels 
Sprouts 
Collards 
Kale 
Mustard 
Greens 
Kohlrabi and 
other 
Brassica 
crops 
Bulb 
Vegetables 
Onion 
Garlic 
Shallots and 
other bulb 
vegetables 
Diseases 
Pin Rot Complex 
AlternarialXanthomonas 
Bacterial Leaf Spot 
Pseudomonas syringae 
Bacterial Soft Rot 
Erw;n;a / Pseudomonas 
Black Rot 
Xanthomonas 
campestris 
Xanthomonas Leaf Spot 
Xanthomonas 
campestris 
Alternaria Leaf Spot 
Alternaria spp. 
Anthracnose 
Colletotrichum 
higginsianum 
Cercospora Leaf Spot 
Cercospora brassicicoJa 
Downy Mildew 
Peronospora parasitica 
Peronospora spp. 
Powdery Mildew 
Erysiphe polygoni 
Southern Blight 
Sclerotium rolfsii 
Botrytis neck rot 
Botrytis spp. 
Botrytis Leaf Blight 
Botrytis squamosa 
Onion Purple Blotch 
Alternaria porri 
Onion Downy Mildew 
Peronospora destructor 
Downy Mildew 
Peronospora spp. 
Powdery Mildew 
Erysiphe spp. 
White Rot 
Sclerotium ceDivorum 
Rust 
Puccinia porri 
Rate 
Ibs.l100 
gallons 
spray 
mix 
2-6 
2-6 
2-6 
Application Instructions 
Pin Rot - For suppression. begin applications when environmental 
conditions in the greenhouse are conducive to rapid disease development 
and repeat on a 7 to 10 day intervals or as needed. Thorough coverage 
is essential. For improved performance. use Serenade 
Biofungicide Wettable Powder in a tank mix or rotational program 
with other registered fungicides. 
For all other diseases - Begin application soon after emergence or 
transplant and when conditions in the greenhouse are conducive to 
disease development. Repeat on a 7 to 10 day interval or as needed. 
Begin applications when environmental conditions in the greenhouse are 
conducive to rapid disease development. Continue sprays at 7 to 10 day 
intervals or as needed. When conditions in the greenhouse are conducive 
to rapid disease development. use Serenade Biofungicide Wettable 
Powder in a rotational program with other registered fungicides for Botrytis 
neck rot control. Thorough coverage is 'essential. 
For suppression. begin application when conditions are conducive to 
disease development and repeal on a 7 to 10 day interval or as needed .. 
Thorough coverage is essential. For improved performance or as a part 
of a prevantative disease control program. use Serenade Biofungicide 
Wettable Powder in a tank mix or rotational· program with other registered 
fungicides for rust control. Do not apply more than 6 lb. product per acre 
per application.

Revised 08 March 2007 SERENADE® Biofungicide Wettable Powder MASTER LABELpage 23 of 36 
Recommended Application Selected Greenhouse Crops 
Serenade Biofungicide WP has a O-Day PreHarvest Interval for all crops contained on this label 
Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or 
use Serenade Biofunoicide WP in a tank mix or rotational Droaram with other reaistered funoicides. 
Green- Diseases Rate Application Instructions 
house Ibs./l00 
Crops gal\ons 
spray 
mix 
Cucurbits Powdery Mildew Begin application soon after emergence or transplant and when 
Erysiphe spp. 2-6 environmental conditions in the greenhouse are conducive to disease 
Cucumber Sphaerotheca spp. development. Repeat on 7 to 10 day interval or as needed. Thorough 
Cantaloupe Gummy Stem Blight coverage is essential. For improved performance, use Serenade 
Melon Phoma cucurbitacearum Biofungicide Wettable Powder in a rotational program with other 
Muskmelon Didymefla bryoniae registered fungicides. 
Squash Angular Leaf Spot 
Watermelon Pseudomonas syringae 
and other Anthracnose 
cucurbits Colletotrichum 
lagenarium 
Downy Mildew 
Pseudoperonospora 
cubensis 
Bacterial Fruit Blotch 
Acidovorax avenae 
Fruiting Gray mold Begin applications soon after emergence or transplant and continue on a 
Vegetables B~trvfis cinerea 2-6 7 to 10 dav interval or as needed. 
Powdery mildew For suppression, begin application soon after emergence or transplant 
Pepper Leveillula taurica 2-6 and continue on a 7 to 10 day interval or as needed. Thorough coverage 
Tomato Oidiopsis taurica is essential. Use maximum label rates under conditions conducive to 
Eggplant Erysiphe spp. rapid disease development. For improved performance, use Serenade 
and other Sphaerotheca spp. Biofungicide Wettable Powder in a tank mix or rotational program with 
fruiting Downy Mildew other registered fungicides for powdery mildew control. 
vegetables Pseudoperonospora 
cubensis 
Bacterial Speck 2- 6 Begin application soon after emergence or transplant and when 
Pseudomonas syringae environmental conditions are conducive to disease development. 
pv tomato Continue applications on a 5 to 7 day interval or as needed. Use higher 
rates when conditions are conducive to rapid disease development. For 
improved performance, use Serenade Biofungicide Wettable Powder in a 
tank mix or in a rotational oroaram with other reaistered funaicides. 
Bacterial Spot Begin application soon after emergence or transplant and when 
Xanthomonas spp. 2-6 environmental conditions are conducive to disease development. 
Continue applications on a 5 to 7 day interval or as needed. When 
Target Spot conditions are conducive to rapid disease development, for improved 
Corynespora cassliicola control, use Serenade Biofungicide Wettable Powder in a tank mix 
program with copper-based bactericides registered for control of bacterial 
soot. 
Buck-eye Rot 2-6 Begin application soon after emergence or transplant and continue on a 7 
Phytophthora parasitica to 10 day interval or as needed. For improved performance of Serenade 
Anthracnose Biofungicide Wettable Powder add a surfactant [such as BiotuneJ to the 
Colletotrichum candidum SDrav tank to imorove coveraae. 
Bacterial Canker 2-6 Begin applications when environmental conditions are conducive to 
Clavibacter disease development. Repeat on 7 to 10 day intervals or as needed. 
michiaanensis 
Early Blight For suppression, begin application when plants are 4 to 6 inches high. 
Alternaria solani 2-6 Repeat applications on a 5 to 7 day interval or as needed. For improved 
Late Blight performance, use Serenade Biofungicide Wettable Powder in a tank mix 
Phytophthora infestans or rotational program with other registered fungiCides for late blight 
suppression control. Use shorter spray intervals under conditions conducive to rapid 
disease development.

Revised 08 March 2007 SERENADE® Biofungicide Wettable Powder MASTER LABELpage 24 of36 
Recommended Application Selected Greenhouse Crops 
Serenade Biofungicide WP has a O-Day PreHarvest Interval for all crops contained on this label 
Under moderate to severe disease pressure, for improved pertormance, increase rates and reduce spray intervals or 
use Serenade Biofun~icide WP in a tank mix or rolational program with other regIstered fungicides. 
Green­
house 
Crops 
Herbsl 
Spices 
Leafy 
Vegetables 
Lettuce 
Celery 
Spinach 
Parsley 
Radicchio 
and other 
leafy 
vegetables 
Diseases 
Bacterial Blight 
Pseudomonas syringae 
Anthracnose 
Colletotrichum spp. 
Alternaria Leaf Blight 
Alternaria spp. 
Botry1is 
Botrytis spp. 
Downy Mildew 
Bremia laetucae 
Peronospora spp. 
Powdery Mildew 
Erysiphe cichoracearum 
Erysiphe spp. 
Pink Rot 
Sclerotinia sclerotiorum 
Anthracnose 
Colletotrichum spp. 
Bacterial Leaf Spot 
Xanthomonas 
campestris pv. vitians 
Bacterial Blight 
Xanthomonas 
campestris 
Sclerotinia Head and 
Leaf Drop 
$cJerotinia spp. 
Rate 
Ibs.l100 
gallons 
spray 
mix 
2-6 
2-6 
2-6 
Application Instructions 
Begin application when environmental conditions in the greenhouse are 
conducive to disease development. Repeat on a 7 to 10 day interval or 
as needed. 
Downy mildew I powdery mildew - For suppression, begin application 
when conditions are conducive to disease development and repeat on a 7 
to 10 day interval or as needed. For improved performance, use 
Serenade Biofungicide Wettable Powder in a tank mix or rotational 
program with other registered fungicides for downy mildew and powdery 
mildew control. 
Pink rot - Begin application approximately 8 weeks before harvest and 
repeat on a 14 day interval. Apply Serenade Biolungicide Wettable 
Powder as a directed spray in sufficient water to ensure thorough 
coverage of the base of the plants and the surrounding soil surface. Light 
irrigation following application to incorporate Serenade Biofungicide 
Wettable Powder may improve disease control. 
Anthracnose - Begin application prior to disease development when 
environmental conditions and plant stage are conducive to rapid disease 
development and repeat on a day 7 to 10 day interval or as needed. 
Use higher rates and shorter application intervals under heavy disease 
pressure. 
Bacterial Blight IBacterial Leaf Spot· Begin applications when 
environmental conditions are conducive to disease development. Repeat 
on 7 to 10 day intervals or as needed. 
For control of early Sclerotinia head and leaf drop: Apply at planting 
or immediately following planting but prior to crop emergence as a 4 to 6 
inch seed line treatment. Make a second application as a directed spray 
with multiple nozzles per each seed line in sufficient water to ensure 
thorough coverage of lower plant leaves and surrounding soil surface 
within 7 days of thinning. Repeat applications on 10 to 14 day intervals il 
conditions for disease development persist. Use higher rates under 
conditions conducive to moderate to severe disease pressure. Light 
irrigation after application to incorporate the product may improve disease 
control. 
OR 
For control of Sclero!lnia head and leaf drop: Apply as a directed 
spray with multiple nozzles per each seed line in sufficient water to ensure 
thorough coverage of lower plant leaves and surrounding soil surface 
within 7 days 01 thinning or transplanting. Repeat applications on 10 to 14 
day intervals if conditions for disease development persist. Use higher 
rates under conditions conducive to moderate to severe disease pressure. 
Light irrigation after application to incorporate the product may improve 
disease control.

;) 713<l 
Revised 08 March 2007 SERENADE® Biofungicide Wettable Powder MASTER LABELpage 25 of36 
Recommended Application Selected Greenhouse Crops 
Serenade Biofungicide WP has a Q-Day PreHarvest Interval for all crops contained on this label 
Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or 
·d WP· I k· I f I "lh h . d f ··d use Serenade Biofungici e ma an mix or ro a lonal prO!;lram WI ot er re(::ustere unQICI es. 
Green- Diseases Rate Application Instructions 
house Ibs.l100 
Crops gallons 
spray 
mix 
Rooll Black Roll Begin application soon after emergence or transplant and when conditions 
Tuber Black Crown Rol 2-6 are conducive to disease development. Repeat on a 7 to 10 day interval 
Altemana spp. or as needed. Use high rates and shorter inteNals when conditions are 
Carrot Alternaria Leaf Blight conducive to rapid disease development. Apply in sufficient water to 
Potato Alternaria dauci provide thorough coverage. 
Sweet Baclerial Leaf Spot 
Potato Xanthomonas 
Beets camoestris pv. carofae 
Ginger Baclerial Leaf Blighl Begin application soon after emergence ar transplant and when conditions 
Horseradish XanthO(T1onas 2-6 are conducive to disease development. Repeat on a 7 to 10 day interval 
Radish campestris or as needed. Use high rates and shorter intervals when conditions 
Ginseng Downy Mildew are conducive to rapid disease development. Apply in sufficient Turnip and Peronospora spp. water to provide thorough coverage. ather rootl Powdery Mildew 
tuber crops ErySiphe spp. 
Gray Mold 
Botrytis spp. 
White Mold 
Sc/erotinia sclerotiorum 
Early Blight For suppression, begin application soon after emergence and when 
Alternaria so/ani conditions are conducive to disease development. Repeat on a 5 to 7 day 
Late Blight suppression 2-6 interval or as needed. For improved performance, use Serenade 
Phytopfl/hora infestans Biofungicide Wettable Powder in a tank mix or rotational program with 
other registered fungicides for late blight control. 
Slrawberry Powdery Mildew Botry1islPowdery mildew • For suppression. begin application. at or 
Sphaerotheca macularis 2-6 before flowering and repeat on a 7 to 10 day interval or as needed 
Erysiphe spp. through harvest. For improved performance. use Serenade Biofungicide 
AnthraCflose Wettable Powder in a tank mix or rotational program with other registered 
Colletotrichum acutatum fungicides for powdery mildew and botrytis control. 
Bolry1is 
Botrytis cinerea Anthracnose - Begin application prior to disease development and 
Gray Mold repeat on a 7 to 10 day interval or as needed. 
Botrytis spp. 
Angular Leaf Spot Angular Leaf Spot· Begin application when conditions are conducive to 
Xanthomonas disease development. Continue sprays at 7 to 10 day intervals or as 
fragana@ needed. Use high rates and shorter intervals when conditions are 
conducive to rapid disease development. For improved performance, use 
Serenade Biofungicide Wettable. Powder in a tank mix or rotational 
program with other registered fungicides. Thorough coverage is 
essential. 
Serenade Biofungicide Wettable Powder may be applied up to and 
including the day of harvest.

Revised 08 March 2007 SERENADE® Blofunglcide Wettable Powder MASTER LABEL page 26 006 
FOR USE ON ORNAMENTALS, TREES, SHRUBS, FLOWERS, BEDDING PLANTS, TROPICAL PLANTS (ORNAMENTALS -
Poinsettia, Orchids, Dieffenbachla, Palms, SpathlphyUum, Rhaphlolepsls, Aglaonema and FRUIT - Bananas, Mangos, 
Papaya), TURF, LAWNS, SOD, GOLF COURSES (GREENS, TEES, FAIRWAYS AND ROUGHS), SEEDLINGS, CONIFERS 
[Agricultural Use], [Commercial], [Residential Use] [Reforestation] 
FOR USE ON TURF, ORNAMENTALS, TREES, SHRUBS-
Serenade Biofungicide Wettable Powder is a protectant fungicide for use indoors and outdoors for control of certain foliar diseases 
in the field, greenhouses [open or enclosed1, interiorscape, residential and commercial landscapes, nurseries [open or enclosed1 
shade house environments, seedling production sites, golf courses (greens, tees, fairways and roughs), forests, forestry seedling 
production sites. 
Serenade Biofungicide Wettable Powder can be applied to ornamentals, trees, shrubs, flowers, annual and perennial bedding 
plants, potted flowers, cut flowers, tropical foliage, container grown trees and shrubs, forestry seedlings, turf, lawns, sad, golf 
courses (greens, tees, fairways and roughs) and conifer production for reforestation purposes (greenhouses, shade houses, 
nurseries. indoors, outdoors, containers or field). 
Foliar Application Use on Ornamentals. Tr"s_ Shrubs_ Flowers. Bedding Planta. Tropical Plants. Seedlings, Conifers: 
APPLICATION INSTRUCTIONS: Apply Serenade Biofungicide Wettable Powder at rates ranging from 2 to 6 Ibs. of product in 100 
gallons of water per acre. Make applications on a 3 to 10 day schedule. Begin applications when condaions favor disease 
development prior to the onset of disease. [Begin applications prior to or in the early stages of disease development.1 
Under nonnal conditions apply Serenade Biofungicide Wettable Powder at a rate of 4lbs. of product per 100 gallons of spray 
solution per acre on a 7-day schedule. When conditions favor severe disease development shorten the spray interval or use a 
higher rate. Thorough coverage is essential for effective disease control. When more diluted or concentrated spray solutions are 
needed for the type of equipment being used, follow the 'Use Determination" section of this label. 
See application rate tables for more detailed application instructions. 
PLANTS EVALUATED FOR PHYTOTOXICITY 
Serenade Biofungicide Wettable Powder has been tested for phytotoxicity on the ornamental species listed below. Since it is 
impossible to test all of the species and cultivars listed on this label under all conditions it is recommended that a small-scale 
preliminary trial be conducted to check for sensitivity before using this product on a large number of plants, using the product in 
accordance with all label use directions. 
TABLE 1 
PLANTS EVALUATED FOR PHYTOTOXICITY 
Annual and Perennial Flowering Plants: 
Alyssum Asters 
Begonia Calla lily 
Chrysanthemum Cyclamen 
Dwarf Bee-Balm 
Garden phlox 
Golden star 
Kalanchoe 
Lobelia 
Pansies 
Portulaca 
Sa/via spp. 
Verbena spp. 
Zinnias 
Spirea 
Geraniums 
Hydrangea 
Linaria 
Marigolds 
Petunia 
Ranunculus 
Snapdragons 
Vinca 
Azalea 
Dianthus 
Easter lily 
Gerbera 
Impatiens 
Lisianthus 
Orchids 
Poinsettia 
Roses 
Stock 
Violas 
Tropical foliage: 
Aglaonema 
Dracaena spp. 
Hibiscus 
Spathiphyllum 
Dieffenbachia 
English Ivy 
Leatherleaf Fern 
Trees and Shrubs: 
Azalea 
Crape myrtle 
Jumbo azalea 
Japanese maple 
Lilac 
Photinia 
Rosaceae spp. 
Boxwood 
Dogwood 
Indian Hawthom 
Ligustrum japonicum 
Loropetalum 
Rhododendron 
Soli Touch Holly

J-tt \3~ 
Revised 08 March 2007 SERENADE® Biofungicide Wettable Powder MASTER LABEL page 27 of36 
FOR USE AS SOIL DRENCH APPLICATIONS on Ornamentals, Trees, Shrubs, Flowers, Bedding Plants, 
Tropical Plants, Seedlings, Conifers: [Agricultural], [Commercial], [Residential Use] [Indoors and Outdoors] 
[Greenhouses, Glasshouses, Nurseries] [Open and Enclosed] 
Serenade Biofungicide Wettable Powder is a broad spectrum biofungicide for the prevention, suppression and control of soil borne 
diseases on a wide range of annual and perennial bedding plants, potted flowers, foliage plants, deciduous trees and shrubs, and 
fruits and vegetables grown in protected environments. Serenade Biofungicide Wettable Powder enhances germination and plant 
growth by suppressing diseases caused by RhizQctonia, Pythium, Fusarium and Phytophthora. 
APPLICATION INSTRUCTIONS: Mix 2 lb. to 6 lb. of Serenade Biofungicide Wettable Powder with 100 gallons of water. Use 
higher application rates under conditions of heavy disease pressure. Apply finished mixture at a rate to thoroughly soak the growing 
media through the root zone (1 pint I sq. ft. for each 3 inches of soil depth) as a drench or directed spray using hand held, 
mechanical or motorized spray equipment, or as a chemigation drench or directed spray using applicable sprinkler irrigation 
systems. Begin applications during or after seeding, sticking of cuttings or after transplanting to propagation beds, containers, pots 
or trays. Optimal performance is obtained with preventative treatments repeated every 21 - 28 days throughout the growing cycle. 
Serenade Biofungicide Wettable Powder can be mixed with chemical fungicides registered for soil applications. See application 
rates tables for rates and application instructions. 
FOR USE ON TURF, LAWNS, SOD, GOLF COURSES 
(GREENS, TEES, FAIRWAYS AND ROUGHS) ORNAMENTAL TURF- [Agricultural), [Commercial), [ReSidential Use) 
Serenade Biofungicide Wettable Powder is a broad spectrum biofungicide for use in the prevention, suppression and aiding in 
control of turf and lawn diseases; brown patch, dollar spot, powdery mildew, rust and anthracnose. 
Turf. Lawns. Sod. Greens. Ornamental Turf Use: 
APPLICATION INSTRUCTIONS: Apply at the rate of 2 to 6 oz. of Serenade Biofungicide Wettable Powder per 1000 sq. ft. of 
surface area. Apply in sufficient water to provide thorough coverage, depending on the application equipment. Two gallons of 
water per 1000 sq. ft of surface is commonly used. 
See application rate tables for more detailed application instructions.

Revised 08 March 2007 SERE!liADE® Biofungkide Weltable Powder MASTER LABEL 
~o( ?/6 
page 28 of 36 
Application Rates for Turf, Lawns, Sod, Golf Courses (Greens, Tees, Fairways and Roughs), Ornamental Turf 
Serenade Biofunglcide Wettable Powder has a O-Day PreHarvest Interval for all crops contained on this label. 
Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or 
use Serenade Biofungicide Wettable Powder in a tank mix or rotational program with other registered fungicides. 
Crops Disease Rate Application Instructions 
/1000 sq. ft 
of surface 
area 
Turf, Brown patch Apply at the rate of 2 to 6 oz. of Serenade Biofungicide Wettable Powder 
Sod. Rhizoctonia salam' 2-6 oz. per 1000 sq. ft. of surface area. Apply in sufficient water to provide 
Lawns, Golf Doliar Spot thorough coverage, depending on the application equipment. Two 
Course, Lanzia spp., gallons of water per 1000 sq. ft of surface is commonly used. 
(Fairways, Moellerodiscus spp. 
Roughs, Greens, Sclerotinia homeocarpa Begin applications when conditions are conducive to disease 
Tees) development. Continue applications on 7 to 10 day intervals or as 
Seed production Powdery Mildew needed. Under moderate to severe disease pressure, for improved 
grasses, etc. Erysiphe graminis performance, increase rates and reduce spray intervals or use Serenade 
Biofungicide Wettable Powder in a tank mix or rotational program with 
Rust other registered fungicides. 
Bluegrass Puccinia spp 
Bentgrass Anthracnose Aids in control of; brown patch, doliar spot, powdery mildew, rust Bermuda grass Colletotrichum and anthracnose. Dichondra graminicola 
Fescue 
Orchard [Optional/Alternate Statements/Examples of Mixing/Application 
grass Instructions are in Brackets below} 
Poa annua [Mix at the rate of 1 to 3 oz. of Serenade Biofungicide Wettable Powder St. Augustine per ga/lon of water and apply spray solution at the rate of 2 gallons per 
Ryegrass 1000 sq. ft. (equivalent to 2 to 6 oz. of product per 1000 sq. ft. of turf.] 
Zoyia 
Mixtures {Mix at the rate of 2 to 6 oz of Serenade Biofungicide Wettable Powder 
and other per gallon of water and spray solution at the rate of one gallon per 1000 
grasses or sq. ft. of turf. 
ornamental turf 
[Mix at the rate of 3 oz. of Serenade Biofungicide Wettable Powder per 
gallon of water when included in a tank mix with other registered 
fungicides.]

Revised 08 March 2007 SERENADE®Biofungicide Wettable Powder MASTER LABEL page 29 of 36 
Application Rates for Use as a Foliar Spray on Ornamentals, Trees, Shrubs, Flowering Plants 
Serenade Biofungicide Wettable Powder has a O-Day PreHarvest Interval for all crops contained on this label. 
Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or 
use Serenade Biofungicide Wettable Powder in a tank mix or rotational program with other registered fungicides. 
Crops Disease Rate Application Instructions 
Ibs.J100 
gallons 
spray mix 
Ornamentals Anthracnose -- 2-6 
Trees. Shrubs Colfetotrichum spp. Indoors, Outdoors, Field, Greenhouse, and Nursery Grown Plants: 
Flowering Plants Apply Serenade Biofungicide Wettable Powder at rates ranging from 2-6 
Tropical Plants Bacteria - Ibs. of product in 100 gallons of water per acre. Make applications on a 3 
Erwinia spp. to 10 day schedule. Begin applications when conditions favor disease 
Pseudomonas spp. development prior to the onset of disease. [Begin applications prior to or 
Fields. Outdoors. Xanthomonas spp. in the early stages of disease development.] 
Indoors, 
Greenhouses, Black spot of rose - Under normal conditions apply Serenade Biofungicide Wettable Powder 
Nurseries Diplocarpon rosae at a rate of 4 pounds of product per 100 gallons of spray solution per acre 
on a 7 day schedule. When conditions favor severe disease 
Annuals Botrytis - development shorten the spray interval or use a higher rate. Thorough 
Perennials Botrytis cinerea coverage is essential for effective disease control. When more diluted or 
Bedding plants concentrated spray solutions are needed for the type of equipment being 
Potted flowers Downy Mildew - used, follow the "Use Determination" section of this label. 
Cut flowers Peronospora spp. 
Foliage plants 
Deciduous trees Leaf spots-
Deciduous shrubs Alternaria spp. 
Tropical foliage Cercospora spp. 
Container grown Entomosporium spp. 
plants Helminthsporium spp. 
Myrothecium spp. 
Septaria spp. 
. 
Powdery mildew -
Erysiphe spp. 
Oidiumspp. 
Podosphaera spp. 
Sphaerotheca spp. 
Phytophthora spp. --
Rust-
Puccinia spp. 
Scab-
Venturia spp.

Revised 08 March 2007SERENADE®Biofungicide Wettable Powder MASTER LABEL paEe 30 of 36 
Application Rates for Soil Drench Uses in Field, Greenhouses, Shade houses, Nurseries 
[Outdoors and Indoors) [Open or Enclosed) 
Serenade Biofungicide Wettable Powder has a O-Day Pre Harvest Interval for all crops contained on this label. 
Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or 
use Serenade Biofuo.9Jcide Wettable Powder in a tank mix or rotational program with other reoistered funqicides. 
Crops Disease Rate' Application Instructions 
Lbs.l100 
gallons 
spray mix 
Ornamentals Rhizocfonia spp. 2-6 Soil Drench Uses: Field, Greenhouses, Glasshouse, Shadehouses, 
Trees pythium spp. Indoors/Outdoors, Open And Enclosed Nurseries 
Shrubs Fusarium spp. 
Annuals Phytophthora spp. Mix 2 lb. to 6 lb. of Serenade Biofungicide Wettable Powder with 100 
Perennials gallons of water. Use higher application rates under conditions of heavy 
Flowering plants disease pressure. 
Tropical plants 
Bedding plants Apply finished mixture at a rate to thoroughly soak the growing media 
Container plants thro~gh the root zone (1 pint I sq. ft. for each 3 inches of soil depth) as a 
Potted plants drench or directed spray using hand held, mechanical or motorized spray 
Foliage plants equipment, or as a chemigation drench or directed spray using applicable 
Deciduous trees sprinkler irrigation systems. Begin applications during or after seeding, 
Deciduous shrubs sticking of cuttings or after transplanting to propagation beds, containers, 
Forestry pots or trays. Optimal performance is obtained with preventative 
Seedlings treatments repeated every 21 - 28 days throughout the growing cycle. 
Fruits Serenade Biofungicide Wettable Powder can be mixed with chemical 
Vegetables fungicides registered for soil applications. 
and other crops 
grown in 
greenhouses and 
open and 
enclosed 
nurseries 
, Rate presented on pounds/1 00 gallons of spray mIx otherwIse noted.

Revised 08 March 2007 SERENADE® Biofungicide Wettable Powder MASTER LABEL page 31 of 36 
Home & Garden SUB LABEL 
Serenade Biofungicide Wettable Powder® 
A Wettable Powder Blofungicide 
[For Home and Garden Use] 
[For Home, Garden and Lawn (Turf) Use] 
[Optional/Altemate Statements] 
[Alternate Name: Serenade ® Garden Disease Control Wettable Powder] 
[Optional Claims:] 
[Attacks over 40 diseases] 
[Attacks both fungal & bacterial diseases] 
[Apply any time of day] 
{Will not burn or injure leaves, lawns (turf)] 
[Fungicide (or Biofungicide) that attacks harmful garden and lawn diseases] 
[Use on Roses, Vegetables, Fruits, Flowering Plants, Trees, Shrubs and Lawns (Turf)] 
[Controls Bacterial Spot, Powdery Mildew, Rust, Grey Mold, Leaf Blight, Scab] 
[Same active ingredient used by farmers1 
(Optional Claims for Lawn and Turf Label:] 
[Prevents and controls harmful (major) Jawn diseases (including brown patch, dollar spot)"] 
[Controls Brown Patch, dollar spot and other common lawn diseases] 
[Use anytime on all lawns to prevent and control major lawn diseases] 
[Promotes healthy disease-free lawns] 
["Easy! Attach Hose and Spray"l 
{Same active ingredient used on golf courses] 
[Promotes Greener, Healthier Lawns] 
ACTIVE INGREDIENT 
QST 713 strain of dried Bacillus subtiUs ..... 10% 
OTHER INGREDIENTS ... 
Total .. 
. ............... 900/0 
.100.0% 
Contains a minimum of 5 x 109 cfu/g 
EPA Reg. No. 69592-4 
EPA Est. No.: 
69592-
MEX-1 
67545-
AZ-l 
66728-
GA-2 
37429-
GA-2 
69592-
CA-, 
5 
Superscript corresponds to last digit of lot number stamped on container 
u.s. Patent Nos. 6,060,051, 6,103,228,6,291,426, and 6,417,163 on QST 713 strain of Bacillus subtilis 
Net weight: 
[For smaller container sizes:] 
KEEP OUT OF REACH OF CHILDREN 
CAUTION 
[See attached booklet for First Aid Statements.] 
[Peel back tab for First Aid and Precautionary Statements and Directions for Use.] 
---------- -------- ---- - - --

Revised 08 March 2007 SERENADE® Biofungicide Wettable Powder MASTER LABEL page 32 of 36 
PRECAUTIONARY STATEMENTS-Home and Garden 
HAZARDS TO HUMANS & DOMESTIC ANIMALS 
CAUTION 
Harmful if inhaled. Avoid breathing spray mis!. Harmful if absorbed through skin. Prolonged or frequently repeated 
skin contact may cause allergic reactions in some individuals. Avoid contact with skin, eyes or clothing. Wash 
thoroughly with soap and water after handling. Causes moderate eye irritation. Remove contaminated clothing and 
wash clothing before reuse. 
FIRST AID 
IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial 
respiration, preferably mouth-to-mouth if possible. Call a poison control center or doctor for further treatment advice. 
IF ON SKIN: Take off contaminated clothing. Rinse skin with plenty of water for 15-20 minutes. Call a poison control 
center or doctor for further treatment advice. 
IF IN EYES: Hold eyes open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if 
present after the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice. 
Have the product label with you when calling a poison control center or doctor. 
ENVIRONMENTAL HAZARDS - Home and Garden 
Do not apply directly to water, Do not contaminate water when disposing of equipment wash waters or rinsate. 
DIRECTIONS FOR USE - Home and Garden 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
GENERAL USE INFORMATION - Home and Garden 
Serenade Biofungicide Wettable Powder [Alternate Statement: is a broad spectrum, preventative biofungicide recommended for the 
control or suppression of many important plant diseases and) [Alternate Statement: effectively controls or prevents a wide range of 
important fungal and bacterial plant diseases and] [Serenade Biofungicide Wettable Powder] may be used on roses, vegetables, 
fruits, nuts, flowers, houseplants, foliage, trees, shrubs, lawns, turf, sod, and ornamental turf r located in residential landscapes]. 
[Serenade Biofungicide Wettable Powder may be applied any time of day, in full sun and high temperatures, without stressing or 
burning foliage.] 
As a general precaution, when exposed to high concentrations of a Jiving microbial product such as this, wear a dust particle mask 
when applying this product.

Re\'ised 08 March 2007 SERENADE®Biofungicide Wettable Powder MASTER LABEL page 33 of36 
MIXING AND APPLICATION INSTRUCTIONS - Home and Garden 
Serenade Biofungicide Wettable Powder can be applied in commonly used pressurized hand-held sprayers, and spray trigger 
bottles. Spray to ensure thorough coverage of the plant. 
For best results. treat prior to foliar disease development or at the first sign of foliar disease infection. Repeat at 7 day intervals or 
as needed. [Under conditions of high disease pressure] When environmental conditions favor rapid disease development (high 
humidity, excessive rain, extreme moisture condition, etc.) spray more often [Alternate: shorten the spray interval]. 
Serenade Biofungicide Wettable Powder can be applied up to and including the day of harvest. 
Pressurized Hand-Held Sprayer Application Instructions: 
Mixing and Application: 
For all applications mix the spray solution thoroughly and keep spray solution agitated during application. Do not allow spray 
mixture to stand overnight orfor prolonged periods. 
For Fruits, Vegetables, Nuts (e. g. Apples/Pears, Broccoli, Carrot, Cherries, Cucurbits, Grapes, Leafy Vegetables, 
Onions/Garlic, Pepper, Tomato, and Walnuts): mix Yo cup to 1 cup [(Yo cup = 4 TBSe> to 1 cup = 16 TBSP)] of Serenade 
Biofungicide Wettable Powder per gallon of water. Spray plants to runoff, covering both top and bottom surface of foliage to ensure 
thorough coverage. 
For Annual and Perennial Ornamental Plants, Flowering Plants, Tropical Foliage, Trees and Shrubs: mix Yo cup to 1 cup [(Yo 
cup = 4 TBSP to 1 cup = 16 TBSP)]. of Serenade Biofungicide Wettable Powder per gallon of water. Spray plants to runoff, covering 
both top and bottom surface of foliage to ensure thorough coverage. 
For Lawns, Turf and Ornamental Turf: mix 6 TBSP of Serenade Biofungicide Wettable Powder per gallon of water. Apply at a 
rate of 1 gallon of spray solution per 500 square feet. 
[optional/alternate: For Lawns, Turf and Ornamental Turf: mix 3 TBSP of Serenade Biofungicide Wettable Powder per gallon 
of water. Apply at a rate of 2 gallon of spray solution per 500 square feet.] 
[Serenade Biofungicide Wettable Powder) MAY BE USED ON [THE FOLLOWING): [Alternate: VEGETABLES, FRUIT, 
NUTS, AND ORNAMENTAL PLANTS) [Alternate; PLANTS, CROPS, SITES) 
PLANTS [CROPS, SITES): 
HOME and GARDEN (VEGETABLE, FRUIT AND NUTS) PLANTS: 
Artichoke. Asparagus 
Berries (Blueberries, Blackberry, Raspberry. Loganberry, Huckleberry. Cranberry, Gooseberry, Elderberry, Currant, Caneberry, 
and other berry crops) 
Brassica (Broccoli. Cabbage, Cauliflower, Brussels Sprouts, Collards, Kale, Mustard Greens, Kohlrabi and other Brassica crops) 
Bulb Vegetables (Onion. Garlic, Shallots and other bulb vegetables) 
Citrus (Orange, Grapefruit, lemon, Tangerine, Tangelo, Pummelo and other citrus crops) 
Cucurbits (Cucumber. Cantaloupe, Melon, Muskmelon, Squash, Watermelon and other cucurbit crops) 
Fruiting Vegetables (Pepper, Tomato, Eggplant and other fruiting vegetables) 
Grape. Herbs/ Spices, Hop 
Leafy Vegetables (Lettuce. Celery, Spinach, Parsley, Radicchio and other leafy vegetable crops) 
Legumes/vegetables (Beans, Green beans, Snap beans. Shell beans, Dry Beans, Garbanzo beans, Lima beans, Peas, Chick peas, 
Split peas. Lentils and other legume/ vegetable crops) 
Mango, Mint, Olive, Papaya, Peanuts

Revised 08 March 2007 SERENADE® Biofungicidc Wettable Powder MASTER LABEL page 34 of36 
Porne Fruit (Apple, Crabapple, Pear, Quince, Mayhaw and other porne fruit) 
Root I Tuber (Carrot, Potato, SWeet Potato, Beets, Ginger, Horseradish, Radish, Ginseng, Turnip and other rooU tuber crops) 
Roses 
Stone Fruit (Apricot, Cherry, Nectarine, Peach, Plum, Prune, and other stone fruit crops) 
Strawberry. Sweet Corn, Tobacco, Watercress 
Tree Nut (Almond. Pistachio, Pecan, Walnut, Filberts, Chestnut, Cashew, Beechnut, Buttemut and other tree nut crops) 
GREENHOUSE PLANTS: 
Brassica (Broccoli, Cabbage, Cauliflower, Brussels Sprouts, Collards, Kale, Mustard Greens, Kohlrabi and other Brassica crops) 
Bulb Vegetables (Onion, Garlic. Shallots and other bulb vegetabies) 
Cucurbits (Cucumber, Cantaloupe. Melon, Muskmelon, Squash, Watermelon and other cucurbits) 
Fruiting Vegetables (Pepper, Tomato, Eggplant and other fruiting vegetables) 
Herbsl Spices 
Leafy Vegetables (Lettuce. Celery. Spinach, Parsley. Radicchio. and other leafy vegetables) 
Root I Tuber (Carrot, Potato, Sweet Potato, Beets, Ginger, Horseradish, Radish, Ginseng, Turnip and other rooU tuber crops) 
Strawberry 
ORNAMENTALS. TREES. SHRUBS. FLOWERING PLANTS. TROPICAL PLANTS: 
PLANTS EVALUATED FOR PHYTOTOXICITY 
Annual and Perennial Flowering Plants: 
Alyssum Asters 
Begonia Calla lily 
Chrysanthemum Cyclamen 
Dwarf Bee-Balm Easter lily 
Garden phlox Geraniums 
Golden star Hydrangea 
Kalanchoe Linaria 
Lobelia Marigolds 
Pansies Petunia 
Portulaca Ranunculus 
Salvia spp. Snapdragons 
Verbena spp. Vinca 
Zinnias 
Tropical foliage: 
Aglaonema 
Dracaena spp. 
Hibiscus 
Spathiphyllum 
Dieffenbachia 
English Ivy 
Leatherleaf Fern 
Trees and Shrubs: 
Azalea Boxwood 
Dogwood 
Azalea 
Dianthus 
Gerbera 
Impatiens 
Lisianthus 
Orchids 
Poinsettia 
Roses 
Stock 
Violas 
Crape myrtle 
Jumbo azalea 
Japanese maple 
Lilac 
Photinia 
Rosaceae spp. 
Spirea 
Indian Hawthorn 
Ligustrum japon;cum 
Loropetalum 
Rhododendron 
Soft Touch Holly

Revised 08 March 2007 SERENADE®Biofungicide Wettable Powder MASTER LABEL page 35 of 36 
[Optional Statement; It is impossible to test all plants for phytotoxicity. To assure that the plants to be treated are not sensitive to 
the treatment, apply a small amount of the highest application rate of the product to a few leaves or the above ground portion of a 
plant and check within 3 days. Use product according to label directions.] 
DISEASES CONTROLLED [OR SUPRESSED) [OR PREVENTED) [BY SERENADE BIOFUNGICIDE WETTABLE POWDER) 
[ON VEGETABLES, 
FRUIT, NUTS, ORNAMENTAL PLANTS) [Alternate; ON PLANTS, CROPS, SITES) 
Anthracnose - Colletotrichum spp. 
Bacteria-Erwinia spp, Pseudomonas spp, Xanthomonas spp. 
Bacterial Leaf Blight (Xanthomonas campestris) 
Bacterial Speck (Pseudomonas syringae pv. Tomato 
Bacterial Spot (Xanthomonas spp.) - suppression 
Bean Rust (Uromyees appendieulatus) - suppression 
Black Mold (Alternaria alternata) 
Black Root Rot IBlack Crown Rot (Alternaria spp.) 
Black spot of rose -- Diplocarpon rosea 
Botrytis (Botrytis spp) 
Botrytis Leaf Blight (Botrytis squamosa) 
Botrytis Neck Rot (Botrytis spp.) 
Downy Mildew (Sremia laelucae, Peronospora spp., and Plasmopara vitjco/a) - suppression 
Early Blight (Alternaria solani) - suppression 
Fire Blight (Erwinia amy/ovora) - suppression 
Gray Mold (Botrytis cinerea) 
Greasy spot (Myeosphaerella citri) - suppression 
Late Blight (Phytophthora infestans) - suppression 
Leaf spots - (Alternaria spp, Cercospora spp, Entomosporium spp, Helminthsporium spp, Myrothecium spp, Septaria spp.) 
Onion Downy Mildew (Peronospora destructor) 
Onion Purple Blotch (Alternaria porri) 
Phytophthora spp 
Pin Rot (Alternaria lXanthomonas complex) - suppression 
Powdery Mildew (Uncinula necator Erysiphe spp., Sphaerotheca spp., Oidiapsis faurica, Leveillula taurica, Podosphaera 
leucotricha) 
Powdery Mildew - Erysiphe spp, Oidium spp, Podosphaera spp, Sphaerotheca spp 
Rust - Puccinia spp. 
Scab (Venturia spp.) - suppression 
Sclerotinia head and leaf drop (Sclerotinia spp.) 
Sour Rot

Revised 08 March 2007 SERENADE(K) Biofungicide Wettable Powder MASTER LABEL page 36 of 36 
Target Spot (Corynespora eassiico/a) 
Walnut Blight (Xanthomonas campestris) 
White Mold (Sc/erotini;) sc/erotiorum) - suppression 
[SERENADE BIOFUNGICIDE WETIABLE POWDER] MAY BE USED ON LAWNS, TURF AND ORNAMENTAL TURF and Golf 
Courses (Fairways, GREENS, roughs, tees). 
LAWNS, TURF AND ORNAMENTAL TURF, GOLF COURSES (Fairways, GREENS. Roughs, Tees): 
Bluegrass, Bentgrass, Bermuda grass, Dichondra, Fescue, 
Orchard grass, Poa annua, St. Augustine, Ryegrass, Zoyia, Mixtures and other grasses or ornamental turf. 
DISEASES CONTROlLED [OR SUPRESSED] [OR PREVENTED] [BY SERENADE BIOFUNGICIDE WETIABLE POWDER] 
[ON LAWNS, TURF AND ORNAMENTAL TURF and Golf Courses (Fairways, GREENS, roughs, tees).] 
Lawn and Turf Diseases: 
Brown patch (Rhizoetonia so/ani) 
Dollar Spot (Lanzia spp., Moellerodiscus, spp. fonnerly Se/erot/nis homeocarpa) 
Powdery Mildew (Erysiphe gramin/s) 
Rust (Pueeinia spp.) 
Anthracnose (Col/etotdehum gram/nico/a) 
STORAGE AND DISPOSAL - Home and Garden 
STORAGE: Store in o(iginal container only, [Alternate: in an area inaccessible to children] [or Alternate: out of reach of children]. 
Keep container closed when not in use. 
CONTAINER DISPOSAL: 
If empty: Do not reuse this container. Place in trash or offer for recycling if available. 
If partly filled: Call your local solid waste agency for disposal instructions. Never place unused product down any indoor or outdoor 
drain. 
CONDITIONS FOR SALE AND WARRANTY 
Except to the ex1ent prohibited by applicable law. AgraQuest offers this product with the following conditions: 1) 
buyers and users of this product assume the risk of any storage, handling or use contrary to AgraQues!'s label and 
directions and 2) AgraQuest's liability shall in no case exceed the purchase price of the applicable AgraQuest product. 
Questions or Comments call 800 962-8980 
www.agraguest.co!l! 
Serenade ® is a registered trademark of AgraQuest, Inc. 
© Copyright AgraQuest, Inc., 2007 
AgraQuest. Inc. 
1530 Drew Avenue 
Davis. California 95618 
www.agraquest.com