# RESOLVE SG

- EPA Reg No: **352-748**
- Registrant: CORTEVA AGRISCIENCE, LLC
- Signal word: Caution
- Active ingredients: Rimsulfuron (25%)
- Label accepted: 2023-04-17
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000352-00748-20230417.pdf

---
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY 
 WASHINGTON, DC 20460 
OFFICE OF CHEMICAL SAFETY 
AND POLLUTION PREVENTION 
 
Notification ABN or Label Acceptable v.20220527 
April 17, 2023 
 
Wes Marchione 
Regulatory Leader – Regulatory Affairs 
Corteva Agriscience 
9330 Zionsville Road 
Indianapolis, IN 46268 
 
Subject: Notification per PRN 98-10 – Updated warranty statement 
 Product Name: Resolve SG 
 EPA Registration Number: 352-748 
 Application Date: 06/23/2022 
 Decision Number: 585701 
 
Dear Wes Marchione: 
 
The Agency is in receipt of your Application for Pesticide Notification under Pesticide 
Registration Notice (PRN) 98-10 for the above referenced product. The Registration Division 
(RD) has conducted a review of this request for its applicability under PRN 98-10 and finds that 
the action requested falls within the scope of PRN 98-10. 
 
The label submitted with the application has been stamped “NOTIFICATION” and placed in our 
records. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please be 
aware that the website becomes labeling under the Federal Insecticide, Fungicide, and 
Rodenticide Act (FIFRA) and is subject to review by the Agency. If the website is false or 
misleading, the product would be misbranded and unlawful to sell or distribute under FIFRA 
section 12(a)(1)(E). 40 CFR 156.10(a)(5) lists examples of statements EPA may consider false or 
misleading. In addition, regardless of whether a website is referenced on your product’s label, 
claims made on the website may not substantially differ from those claims approved through the 
registration process. Therefore, should the Agency find or if it is brought to our attention that a 
website contains false or misleading statements or claims substantially differing from the EPA 
approved registration, the website will be referred to the EPA’s Office of Enforcement and 
Compliance. 
 
If you have any questions, please contact Jennifer Drobish at 202-566-2642 or at 
Drobish.jennifer@epa.gov. 
 
Sincerely,

Page 2 of 2 
EPA Reg. No. 352-748 
Decision No. 585701 
 
 
 
Aswathy Balan 
Senior Regulatory Specialist 
Fungicide and Herbicide Branch 
Registration Division 
Office of Pesticide Programs

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 1 
(Bulk/Tote Base Label): 
RIMSULFURON GROUP 2 HERBICIDE 
RESOLVE® SG 
[Alternate Brand Name: DuPont Resolve® SG] 
HERBICIDE 
Water Soluble Granule 
For fallow, preplant, preemergence, or postemergence use in Field Corn grown for grain or silage, 
and Grain Sorghum 
Active Ingredients 
Rimsulfuron 
N-((4,6-dimethoxypyrimidin-2-yl)aminocarbonyl)-3-(ethylsulfonyl)-2-
p
yridinesulfonamide …………………………………………………………….….…25% 
Other Ingredients………………………………………………………………………………..75% 
Total……………………………………………………………………………….……………100% 
Keep Out of Reach of Children 
CAUTION 
 Precautionary Statements 
Hazards to Humans and Domestic Animals 
Avoid contact with skin, eyes, or clothing. Prolonged or frequently repeated contact may cause allergic 
reactions in some individuals. 
Personal Protective Equipment (PPE) 
Applicators and other handlers must wear: 
x Long-sleeve shirt and long pants 
x Chemical resistant gloves made of any waterproof material 
x Shoes plus socks 
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables 
exist, use detergent and hot water. Keep and wash PPE separately from other laundry. 
Engineering Controls 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements 
listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d) (4-6)], the 
handler PPE requirements may be reduced or modified as specified in the WPS. 
Important: When reduced PPE is worn because a closed system is being used, handlers must be 
provided all PPE specified above for “Applicators and Other Handlers” and have such PPE immediately 
available for use in an emergency, such as a spill or equipment breakdown. 
User Safety Recommendations 
Users Should: 
x Wash hands before eating, drinking, chewing gum, using tobacco or using toilet. 
x Remove clothing/PPE immediately if pesticide gets inside. 
x Then wash thorou ghly and put on clean clothing. 
352-748
04/17/2023

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 2 
 
x Remove PPE immediately after handling this product. Wash the outside of gloves before removing. 
x As soon as possible, wash thoroughly and change into clean clothing.
 
First Aid 
If in Eyes: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact 
lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or 
doctor for treatment advice. 
If on Skin or Clothing: Take off contaminated clothing. Rinse skin immediately with plenty of water for 
15-20 minutes. Call a poison control center or doctor for treatment advice. 
If Swallowed: No specific intervention is indicated as the compound is not likely to be hazardous by 
ingestion. However, consult a poison control center or doctor if necessary. 
 
Have the product container or label with you when calling a poison control center or doctor, or going for 
treatment. You ma
y also contact 1-800-992-5994 for emergency medical treatment information. 
 
Agricultural Use Requirements 
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR 
Part 170. Refer to the label booklet under "Agricultural Use Requirements" in the Directions for Use 
section for information about this standard. 
 
 Storage and Disposal 
DO NOT contaminate water, food, or feed by storage or disposal. 
Pesticide Storage: Store product in original container only. DO NOT contaminate water, other pesticides, 
fertilizer, food or feed in storage. Store in a cool, dry place. 
Pesticide Disposal: DO NOT contaminate water, food, or feed by disposal. Waste resulting from the use 
of this product must be disposed of on site or at an approved waste disposal facility. 
Container Handling: Nonrefillable container. DO NOTreuse or refill this container. Triple rinse container 
(or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into 
application equipment or a mix tank. Fill the container 1/4 full with water and recap. Shake for 10 
seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. 
Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Then, for Plastic 
Containers, offer for recycling if available or puncture and dispose of in a sanitary landfill, or by 
incineration. DO NOT burn, unless allowed by state and local ordinances. For Metal Containers, offer for 
recycling if available or reconditioning if appropriate, or puncture and dispose of in a sanitary landfill, or by 
other procedures approved by state and local authorities. 
 
Storage and Disposal 
DO NOT contaminate water, food, or feed by storage or disposal. 
Pesticide Storage: Store product in original container only. DO NOT contaminate water, other pesticides, 
fertilizer, food or feed in storage. Store in a cool, dry place. 
Pesticide Disposal: DO NOT contaminate water, food, or feed by disposal. Waste resulting from the use 
of this product must be disposed of on site or at an approved waste disposal facility. 
Container Handling: Nonrefillable container. DO NOT reuse or refill this container. Triple rinse container 
(or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into 
application equipment or a mix tank. Fill the container 1/4 full with water. Replace and tighten closures. 
Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 
seconds. Stand the container on its end and tip it back and forth several times. Turn the container over 
onto its other end and tip it back and forth several times. Empty the rinsate into application equipment or 
a mix tank or store rinsate for later use or disposal. Repeat this procedure two more times. Then, for 
Plastic Containers, offer for recycling if available or puncture and dispose of in a sanitary landfill, or by 
incineration. DO NOT burn, unless allowed by state and local ordinances. For Metal Containers, offer for 
recycling if available or reconditioning if appropriate, or puncture and dispose of in a sanitary landfill, or by 
other procedures approved by state and local authorities.

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 3 
 
Storage and Disposal 
DO NOT contaminate water, food, or feed by storage or disposal. 
Pesticide Storage: Store product in original container only. DO NOT contaminate water, other pesticides, 
fertilizer, food or feed in storage. Store in a cool, dry place. 
Pesticide Disposal: DO NOT contaminate water, food, or feed by disposal. Waste resulting from the use 
of this product must be disposed of on site or at an approved waste disposal facility. 
Container Handling: Nonrefillable container. DO NOT reuse or refill this container. Clean container 
promptly after emptying the contents from this container into application equipment or mix tank and 
before final disposal using the following pressure rinsing procedure. Insert a lance fitted with a suitable 
tank cleaning nozzle into the container and ensure that the water spray thoroughly covers the top, bottom 
and all sides inside the container. The nozzle manufacturer generally provides instructions for the 
appropriate spray pressure, spray duration and/or spray volume. If the manufacturer’s instructions are not 
available, pressure rinse the container for at least 60 seconds using a minimum pressure of 30 PSI with a 
minimum rinse volume of 10% of the container volume. Drain, pour or pump rinsate into application 
equipment or rinsate collection system. Repeat this pressure rinsing procedure two more times. Then, for 
Plastic Containers, offer for recycling if available or puncture and dispose of in a sanitary landfill, or by 
incineration. For Metal Containers, offer for recycling if available or reconditioning if appropriate or 
puncture and dispose of in a sanitary landfill, or by other procedures approved by state and local 
authorities. 
 
Storage and Disposal 
DO NOT contaminate water, food, or feed by storage or disposal. 
Pesticide Storage: Store product in original container only. DO NOT contaminate water, other pesticides, 
fertilizer, food or feed in storage. Store in a cool, dry place. 
Pesticide Disposal: DO NOT contaminate water, food, or feed by disposal. Waste resulting from the use 
of this product must be disposed of on site or at an approved waste disposal facility. 
Container Handling: Nonrefillable container. DO NOT reuse or refill this container. Completely empty 
paper or plastic bag, fiber sack or drum liner by shaking and tapping sides and bottom to loosen clinging 
particles. Empty residue into application or manufacturing equipment. Then offer for recycling if available 
or dispose of empty paper or plastic bag, fiber sack or fiber drum and liner in a sanitary landfill, or by 
incineration. DO NOT burn, unless allowed by state and local ordinances. 
 
Storage and Disposal 
DO NOT contaminate water, food, or feed by storage or disposal. 
Pesticide Storage: Store product in original container only. DO NOT contaminate water, other pesticides, 
fertilizer, food or feed in storage. Store in a cool, dry place. 
Pesticide Disposal: DO NOT contaminate water, food, or feed by disposal. Waste resulting from the use 
of this product must be disposed of on site or at an approved waste disposal facility. 
Container Handling: Refillable container (fiber drum only). Refilling Fiber Drum: Refill this fiber drum with 
Resolve® SG containing rimsulfuron only. DO NOT reuse this fiber drum for any other purpose. Cleaning 
before refilling is the responsibility of the refiller. Completely empty liner by shaking and tapping sides and 
bottom to loosen clinging particles. Empty residue into application or manufacturing equipment. Disposing 
of Fiber Drum and/or Liner: DO NOT reuse this fiber drum for any other purpose other than refilling (see 
preceding). Cleaning the container (liner and/or fiber drum) before final disposal is the responsibility of the 
person disposing of the container. Offer the liner for recycling if available or dispose of liner in a sanitary 
landfill, or by incineration. DO NOT burn, unless allowed by state and local ordinances. If drum is 
contaminated and cannot be reused, dispose of it in the manner required for its liner. To clean the fiber 
drum before final disposal, completely empty the fiber drum by shaking and tapping sides and bottom to 
loosen clinging particles. Empty residue into application or manufacturing equipment. Then offer the fiber 
drum for recycling if available or dispose of in a sanitary landfill, or by incineration. DO NOT burn, unless 
allowed by state and local ordinances. 
 
Refer to the inside of label booklet for additional precautionary information and Directions for 
Use.

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 4 
 
Notice: Read the entire label. Use only according to label directions. Before using this product, read 
Warranty Disclaimer, Inherent Risks of Use, and Limitation of Remedies at end of label booklet. If 
terms are unacceptable, return at once unopened. 
 
In case of emergency endangering health or the environment involving this product, call 1-800-992-5994. 
 
Agricultural Chemical: DO NOT ship or store with food, feeds, drugs or clothing. 
 
EPA Reg. No. 352-748 EPA Est. _________ 
 
™
®Trademarks of Corteva Agriscience and its affiliated companies 
 
Produced for 
Corteva Agriscience LLC 
9330 Zionsville Road 
Indianapolis, IN 46268 
 NET WEIGHT_____

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 5 
 
(Booklet Cover / Small Container Label): 
 
RIMSULFURON GROUP 2 HERBICIDE 
 
RESOLVE® SG 
[Alternate Brand Name: DuPont Resolve® SG] 
HERBICIDE 
 
Water Soluble Granule 
 
For fallow, preplant, preemergence, or postemergence use in Field Corn grown for grain or silage, 
and Grain Sorghum 
 
Active Ingredients 
Rimsulfuron 
N-((4,6-dimethoxypyrimidin-2-yl)aminocarbonyl)-3-(ethylsulfonyl)-2-
p
yridinesulfonamide …………………………………………………………….….…25% 
Other Ingredients………………………………………………………………………………..75% 
Total……………………………………………………………………………….……………100% 
 
Keep Out of Reach of Children 
CAUTION 
 
Agricultural Use Requirements 
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR 
Part 170. Refer to the label booklet under "Agricultural Use Requirements" in the Directions for Use 
section for information about this standard. 
 
Refer to the inside of label booklet for additional precautionary information and Directions for 
Use. 
 
Notice: Read the entire label. Use only according to label directions. Before using this product, read 
Warranty Disclaimer, Inherent Risks of Use, and Limitation of Remedies at end of label booklet. If 
terms are unacceptable, return at once unopened. 
 
In case of emergency endangering health or the environment involving this product, call 1-800-992-5994. 
 
Agricultural Chemical: DO NOT ship or store with food, feeds, drugs or clothing. 
 
EPA Reg. No. 352-748 EPA Est. _________ 
 
™
®Trademarks of Corteva Agriscience and its affiliated companies 
 
Produced for 
Corteva Agriscience LLC 
9330 Zionsville Road 
Indianapolis, IN 46268 
 NET WEIGHT_____

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 6 
 
(Page 1 through end): 
 
 Precautionary Statements 
 Hazards to Humans and Domestic Animals 
CAUTION 
 
Avoid contact with skin, eyes, or clothing. Prolonged or frequently repeated contact may cause allergic 
reactions in some individuals. 
 
Personal Protective Equipment (PPE) 
Applicators and other handlers must wear: 
x Long-sleeve shirt and long pants 
x Chemical resistant gloves made of any waterproof material 
x Shoes plus socks 
 
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables 
exist, use detergent and hot water. Keep and wash PPE separately from other laundry. 
 
Engineering Controls 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements 
listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-6)], the 
handler PPE requirements may be reduced or modified as specified in the WPS. 
 
Important: When reduced PPE is worn because a closed system is being used, handlers must be 
provided all PPE specified above for “Applicators and Other Handlers” and have such PPE immediately 
available for use in an emergency, such as a spill or equipment breakdown. 
 
User Safety Recommendations 
Users Should: 
x Wash hands before eating, drinking, chewing gum, using tobacco or using toilet. 
x Remove clothing/PPE immediately if pesticide gets inside. 
x Then wash thoroughly and put on clean clothing. 
x Remove PPE immediately after handling this product. Wash the outside of gloves before removing. 
x As soon as possible, wash thoroughly and change into clean clothing.
 
First Aid 
If in Eyes: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact 
lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or 
doctor for treatment advice. 
If on Skin or Clothing: Take off contaminated clothing. Rinse skin immediately with plenty of water for 
15-20 minutes. Call a poison control center or doctor for treatment advice. 
If Swallowed: No specific intervention is indicated as the compound is not likely to be hazardous by 
ingestion. However, consult a poison control center or doctor if necessary. 
 
Have the product container or label with you when calling a poison control center or doctor,or going for 
treatment. You ma
y also contact 1-800-992-5994 for emergency medical treatment information. 
 
Environmental Hazards 
DO NOT apply directly to water, or to areas where surface water is present, or to intertidal areas below 
the mean high water mark. DO NOT contaminate water when disposing of equipment wash water or 
rinsate. 
 
Surface Water Advisory: This product may impact surface water quality due to runoff of rain water. This

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 7 
 
is especially true for poorly draining soils and soils with shallow ground water. This product is classified as 
having high potential for reaching surface water via runoff for months or more after application. A level, 
well-maintained vegetative buffer strip between areas to which this product is applied and surface water 
features such as ponds, streams, and springs will reduce the potential loading of this product from runoff 
water and sediment. Runoff of this product will be greatly reduced by avoiding applications when rainfall 
or irrigation is expected to occur within 48 hours. 
 
Windblown Soil Particles: Resolve SG has the potential to move off-site due to wind erosion. Soils that 
are subject to wind erosion usually have a high silt and/or fine to very fine sand fractions and low organic 
matter content. Other factors which can affects the movement of windblown soil include the intensity and 
direction of prevailing winds, vegetative cover, site slope, rainfall, and drainage patterns. Avoid applying 
Resolve SG if prevailing local conditions may be expected to result in off-site movement. 
 
Non-Target Organism Advisory: This product is toxic to plants and may adversely impact the forage 
and habitat of non-target organisms, including pollinators, in areas adjacent to the treated area. Protect 
the forage and habitat of non-target organisms by minimizing spray drift. For further guidance and 
instructions on how to minimize spray drift, refer to the Spray Drift Management section of this label. 
 
 Directions for Use 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
 
DO NOT apply this product in a way that will contact workers or other persons, either directly or through 
drift. Only protected handlers may be in the area during application. For any requirements specific to your 
State or Tribe, consult the agency in your State responsible for pesticide regulation. 
 
Resolve SG herbicide must be used in accordance with the directions for use on this label, in separately 
issued labeling or exemptions under FIFRA (Supplemental Labels, Special Local Need Registrations, 
FIFRA Section 18 exemptions, FIFRA 2(ee) Bulletins), or as otherwise permitted by FIFRA. Always read 
the entire label, including the Limitation of Warranty and Liability. 
 
Agricultural Use Requirements 
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR 
part 170. This Standard contains requirements for the protection of agricultural workers on farms, 
forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for 
training, decontamination, notification, and emergency assistance. It also contains specific instructions 
and exceptions pertaining to the statements on this label about personal protective equipment (PPE) 
and restricted-entry interval. The requirements in this box only apply to uses of this product that are 
covered by the Worker Protection Standard. 
 
DO NOT enter or allow worker entry into treated areas during the restricted entry interval (REI) of 4 
hours. 
 
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and 
that involves contact with anything that has been treated, such as plants, soil, or water, is: 
x Coveralls 
x Chemical resistant gloves made of any waterproof material 
x Shoes plus socks
 
Storage and Disposal 
DO NOT contaminate water, food, or feed by storage or disposal. 
Pesticide Storage: Store product in original container only. DO NOT contaminate water, other pesticides, 
fertilizer, food or feed in storage. Store in a cool, dry place. 
Pesticide Disposal: DO NOT contaminate water, food, or feed by disposal. Waste resulting from the use 
of this product must be disposed of on site or at an approved waste disposal facility.

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 8 
 
 
Container Handling: Nonrefillable container. DO NOT reuse or refill this container. Triple rinse container 
(or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into 
application equipment or a mix tank. Fill the container 1/4 full with water and recap. Shake for 10 
seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. 
Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Then, for Plastic 
Containers, offer for recycling if available or puncture and dispose of in a sanitary landfill, or by 
incineration. DO NOT burn, unless allowed by state and local ordinances. For Metal Containers, offer for 
recycling if available or reconditioning if appropriate, or puncture and dispose of in a sanitary landfill, or by 
other procedures approved by state and local authorities. 
 
Container Handling: Nonrefillable container. DO NOT reuse or refill this container. Triple rinse container 
(or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into 
application equipment or a mix tank. Fill the container 1/4 full with water. Replace and tighten closures. 
Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 
seconds. Stand the container on its end and tip it back and forth several times. Turn the container over 
onto its other end and tip it back and forth several times. Empty the rinsate into application equipment or 
a mix tank or store rinsate for later use or disposal. Repeat this procedure two more times. Then, for 
Plastic Containers, offer for recycling if available or puncture and dispose of in a sanitary landfill, or by 
incineration. DO NOT burn, unless allowed by state and local ordinances. For Metal Containers, offer for 
recycling if available or reconditioning if appropriate, or puncture and dispose of in a sanitary landfill, or by 
other procedures approved by state and local authorities. 
 
Container Handling: Nonrefillable container. DO NOT reuse or refill this container. Clean container 
promptly after emptying the contents from this container into application equipment or mix tank and 
before final disposal using the following pressure rinsing procedure. Insert a lance fitted with a suitable 
tank cleaning nozzle into the container and ensure that the water spray thoroughly covers the top, bottom 
and all sides inside the container. The nozzle manufacturer generally provides instructions for the 
appropriate spray pressure, spray duration and/or spray volume. If the manufacturer’s instructions are not 
available, pressure rinse the container for at least 60 seconds using a minimum pressure of 30 PSI with a 
minimum rinse volume of 10% of the container volume. Drain, pour or pump rinsate into application 
equipment or rinsate collection system. Repeat this pressure rinsing procedure two more times. Then, for 
Plastic Containers, offer for recycling if available or puncture and dispose of in a sanitary landfill, or by 
incineration. For Metal Containers, offer for recycling if available or reconditioning if appropriate or 
puncture and dispose of in a sanitary landfill, or by other procedures approved by state and local 
authorities. 
 
Container Handling: Nonrefillable container. DO NOT reuse or refill this container. Completely empty 
paper or plastic bag, fiber sack or drum liner by shaking and tapping sides and bottom to loosen clinging 
particles. Empty residue into application or manufacturing equipment. Then offer for recycling if available 
or dispose of empty paper or plastic bag, fiber sack or fiber drum and liner in a sanitary landfill, or by 
incineration. DO NOT burn, unless allowed by state and local ordinances. 
 
Container Handling: Refillable container (fiber drum only). Refilling Fiber Drum:Refill this fiber drum with 
Resolve SG containing rimsulfuron only. DO NOT reuse this fiber drum for any other purpose. Cleaning 
before refilling is the responsibility of the refiller. Completely empty liner by shaking and tapping sides and 
bottom to loosen clinging particles. Empty residue into application or manufacturing equipment. Disposing 
of Fiber Drum and/or Liner: DO NOT reuse this fiber drum for any other purpose other than refilling (see 
preceding). Cleaning the container (liner and/or fiber drum) before final disposal is the responsibility of the 
person disposing of the container. Offer the liner for recycling if available or dispose of liner in a sanitary 
landfill, or by incineration. DO NOT burn, unless allowed by state and local ordinances. If drum is 
contaminated and cannot be reused, dispose of it in the manner required for its liner. To clean the fiber 
drum before final disposal, completely empty the fiber drum by shaking and tapping sides and bottom to 
loosen clinging particles. Empty residue into application or manufacturing equipment. Then offer the fiber 
drum for recycling if available or dispose of in a sanitary landfill, or by incineration. DO NOT burn, unless 
allowed by state and local ordinances.

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 9 
 
Product Information 
 
Resolve SG herbicide must be used only in accordance with instructions on this label or in supplemental 
Corteva Agriscience publications. Corteva Agriscience will not be responsible for losses or damage 
resulting from use of this product in any manner not specified by Corteva Agriscience. 
 
Resolve SG herbicide is a water soluble granule containing 25% active ingredient by weight. Resolve SG 
is a selective herbicide for burndown and residual control of certain annual grass and broadleaf weeds 
when applied preplant preemergence or postemergence to field corn grown for grain or silage and grain 
sorghum. Residual weed control is dependent on rainfall or sprinkler irrigation for herbicide activation. 
Resolve SG herbicide may be applied in tank mixtures with other herbicides labeled for use in fallow or 
the intended crop. However, in the case of tank mixes with other herbicides, the most restrictive label 
must be followed. 
 
Resolve SG is absorbed through the roots and leaf tissue of plants, rapidly inhibiting the growth of 
susceptible weeds. Rainfall or sprinkler irrigation is needed to move Resolve SG into the soil. Susceptible 
weeds will generally not emerge from a preemergence or postemergence application. In some cases 
susceptible weeds may germinate and emerge a few days after application, but growth then ceases and 
leaves become chlorotic three to five days after emergence. Death of leaf tissue and growing point will 
follow in some species, while others will remain green but stunted and noncompetitive. 
 
The herbicidal action of Resolve SG may be less effective on weeds stressed from adverse 
environmental conditions (such as extreme temperatures or moisture), abnormal soil conditions, or 
cultural practices. 
 
Resolve SG residual is most effective in controlling weeds when adequate rainfall is received within 5-7 
days after application. If cultivation is necessary because of soil crusting, soil compaction or weed 
germination before rain occurs, use shallow tillage such as rotary hoe to lightly incorporate Resolve SG 
and make certain corn seeds are below the tilled area. 
 
Restrictions 
 
x DO NOT apply to popcorn or sweet corn. 
x DO NOT apply more than a total of 1.0 ounce active ingredient rimsulfuron per acre per crop year to 
field corn from all sources. This includes combinations of fallow, preplant, preemergence and 
postemergence applications of Resolve SG, as well as rimsulfuron from application(s) of products 
such as ALLUVEXTM, BASIS® Blend, INSTIGATETM, LEADOFF®, PREQUEL®, REALM® Q, Resolve 
Q and STEADFAST® Q. 
x DO NOT apply as a fallow, preplant or preemergence treatment to coarse textured soils (sand, loamy 
sand or sandy loam) with less than 1% organic matter. 
x DO NOT apply the organophosphate insecticide terbufos (“Counter”) within 30 days of a preplant or 
45 days of preemergence application of Resolve SG since crop injury may result. 
Preplant/Preemergence applications of Resolve SG to corn where an application of chlorpyrifos 
(“Lorsban”) or other similar organophosphate insecticide is planned may cause unacceptable crop 
injury, especially on soils of less than 4% organic matter. Any crop injury or yield loss resulting from 
these applications are the responsibility of the grower. 
x DO NOT apply more than 0.3 ounce active ingredient rimsulfuron postemergence, per acre per 
application, unless instructed to do so by company technical bulletins, fact sheets, or supplemental 
labeling. 
x DO NOT graze, feed forage, grain or fodder (stover) from treated areas to livestock within 30 days of 
Resolve SG application. 
x DO NOT tank mix Resolve SG with bentazon products including “Basagran” or severe crop injury 
may occur.

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 10 
 
x DO NOT tank mix Resolve SG with foliar-applied organophosphate insecticides including chlorpyrifos 
(“Lorsban”), as severe crop injury may occur. To avoid crop injury or antagonism, apply these 
products at least seven days before or 3 days after the application of Resolve SG. 
x DO NOT irrigate Resolve SG into coarse soils at planting time when soils are saturated. 
x DO NOT apply this product through any type of irrigation system unless instructed to do so by 
company technical bulletins, fact sheets, or supplemental labeling. 
x DO NOT use flood or furrow irrigation to apply Resolve SG. 
x DO NOT apply to ground that is frozen. 
x DO NOT apply by air during a temperature inversion, when wind speed is less than 2 mph or above 
10 mph, or when other conditions could produce poor coverage and/or off-target spray movement. 
x DO NOT apply Resolve SG by air in the state of New York. 
 
Injury or loss of desirable trees or vegetation may result from failure to observe the following: 
x DO NOT apply Resolve SG or drain or flush application equipment on or near desirable trees or other 
plants, or on areas where their roots may extend, or in locations where the chemical may be washed 
or moved into contact with their roots. 
x DO NOT use on lawns, walks, driveways, tennis courts, or similar areas. 
x DO NOT contaminate any body of water. 
 
Precautions 
 
x Allow at least 4 weeks between preemergence application of Resolve SG and postemergence 
applications of unsafened rimsulfuron-containing herbicides. 
x Allow at least 3 weeks between preemergence applications of Resolve SG and postemergence 
applications of safened rimsulfuron containing products, such as REALM® Q, STEADFAST® Q, or 
Resolve Q. 
x Resolve SG may interact with certain organophospate insecticides applied to the crop. Crop response 
varies with field crop, insecticide used, insecticide application method, and soil type. 
x Resolve SG may be applied to crops previously treated with “Fortress”, “Aztec”, or “Force” 
insecticides or other nonorganophosphate (OP) soil insecticides regardless of soil type. 
x Crop injury may occur following an application of Resolve SG if there is a prolonged period of cold 
weather and/or in conjunction with wet soils. 
x Prevent drift or spray to desirable plants. 
x Thoroughly clean application equipment immediately after use. It is recommended to flush the 
sprayer system and recharge with clean water when there are extended periods between Resolve SG 
applications. (See Sprayer Cleanup section of this label for instructions). 
 
Weed Resistance Management 
 
Resolve SG, which contains the active ingredient rimsulfuron, is a Group 2 herbicide based on the mode 
of action classification system of the Weed Science Society of America. 
 
Proactively implementing diversified weed control strategies to minimize selection for weed populations 
resistant to one or more herbicides is a best practice. A diversified weed management program may 
include the use of multiple herbicides with different sites of action and overlapping weed spectrum with or 
without tillage operations and/or other cultural practices. Research has demonstrated that using the 
labeled rate and directions for use is important to delay the selection for resistance. 
 
The continued effectiveness of this product depends on the successful implementation of a weed 
resistance management program. 
 
To aid in the prevention of developing weeds resistant to this product, users should: 
x Scout fields before application to ensure herbicides and rates will be appropriate for the weed species 
and weed sizes present.

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 11 
 
x Start with a clean field, using either a burndown herbicide application or tillage. 
x Control weeds early when they are relatively small (less than 4 inches). 
x Apply full rates of Resolve SG herbicide for the most difficult to control weed in the field at the 
specified time (correct weed size) to minimize weed escapes. 
x Scout fields after application to detect weed esc apes or shifts in control of weed species. 
x Control weed escapes before they reproduce by seed or proliferate vegetatively. 
x Report any incidence of non-performance of this product against a particular weed to your company 
representative, local retailer, or county extension agent. 
x Contact your company representative, crop advisor, or extension agent to find out if suspected 
resistant weeds to this MOA have been found in your region. If resistant biotypes of target weeds 
have been reported, use the application rates of this product specified for your local conditions. Tank 
mix products so that there are multiple effective sites of actions for each target weed. 
x If resistance is suspected, treat weed escapes with an herbicide having a site of action other than 
Group 2 and/or use nonchemical methods to remove escapes, as practical, with the goal of 
preventing further seed production. 
x Suspected herbicide-resistant weeds may be identified by these indicators: 
x Failure to control a weed species normally controlled by the herbicide at the dose applied, especially 
if control is achieved on adjacent weeds; 
x A spreading patch of non-controlled plants of a particular weed species; and 
x Surviving plants mixed with controlled individuals of the same species. 
 
Additionally, users should follow as many of the following herbicide resistance management practices as 
is practical: 
x Use a broad spectrum soil-applied herbicide with other sites of action as a foundation in a weed 
control program. 
x Utilize sequential applications of herbicides with alternative sites of action. 
x Rotate the use of this product with non-Group 2 herbicides. 
x Avoid making more than two applications of Resolve SG and any other Group 2 herbicides within a 
single growing season unless mixed with an herbicide with a different site of action with an 
overlapping spectrum for the difficult-to-control weeds. 
x Incorporate non-chemical weed control practices, such as mechanical cultivation, crop rotation, cover 
crops and weed-free crop seeds, as part of an integrated weed control program. 
x Use good agronomic principles that enhance crop development and crop competitiveness. 
x Thoroughly clean plant residues from equipment before leaving fields suspected to contain resistant 
weeds. 
x Manage weeds in and around fields, during and after harvest to reduce weed seed production. 
 
Integrated Pest Management 
 
This product may be used as part of an Integrated Pest Management (IPM) program that can include 
biological, cultural, and genetic practices aimed at preventing economic pest damage. IPM principles and 
practices include field scouting or other detection methods, correct target pest identification, population 
monitoring, and treating when target pest populations reach locally determined action thresholds. Consult 
your state cooperative extension service, professional consultant or other qualified authorities to 
determine appropriate action treatment threshold levels for treating specific pest/crop systems in your 
area. 
 
Field Corn (Grown for Grain or Silage) Application Information 
 
Fallow 
 
Rate 
Apply Resolve SG at 0.66 to 2.0 ounces per acre.

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 12 
 
Timing to Crop & Weeds 
Resolve SG may be used as a fallow treatment, in the spring or fall when the majority of weeds have 
emerged and are actively growing. Control of emerged weeds will require the addition of spray adjuvants, 
and can be further enhanced with additional tank mix partners. 
 
Restriction: DO NOT apply to ground that is frozen. 
 
Tank Mixtures 
Resolve SG may be used as a fallow treatment and may be tank mixed with other herbicides including 
EXPRESS
® or PANOFLEX™ herbicide brands, dicamba, glyphosate, glufosinate, paraquat, saflufenacil 
and/or 2, 4-D, that are registered for use in fallow. 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read 
and follow the applicable restrictions and limitations and directions for use on all product labels involved in 
tank mixing. Users must follow the most restrictive directions for use and precautionary statements of 
each product in the tank mixture. 
 
Field Corn - Burndown-Preplant-Preemergence 
 
Rate 
Apply Resolve SG at 0.66 - 2.0 ounce per acre before corn emergence. Resolve SG at 1.0 ounce per 
acre fits most preemergence/preplant applications. 
 
See cumulative rimsulfuron rate limitations noted in this label. 
 
Timing to Crop - Burndown 
Apply Resolve SG when weeds are young and actively growing. 
 
The addition of crop oil concentrate or methylated seed oil is recommended for burndown of labeled 
weeds. When weeds are greater than the maximum height listed or weeds not controlled by Resolve SG 
are present, the addition of a burndown herbicide including EXPRESS
® and PANOFLEX™ herbicide 
brands, dicamba, glyphosate, glufosinate, paraquat, saflufenacil, and/or 2, 4-D is recommended. If giant 
ragweed, common cocklebur, henbit, Pennsylvania smartweed or purple deadnettle are present at the 
time of application, the addition of atrazine will improve control. 
 
Observe direction for use and precaution and restrictions on the label of the burndown herbicide. When 
mixing with liquid nitrogen fertilizer or glyphosate, substitute a nonionic surfactant for crop oil. 
 
Timing to Crop - Preplant - Preemergence 
Resolve SG herbicide may be applied either preplant, preplant incorporated (less than 2” deep), or 
preemergence for use in field corn production. Applications of Resolve SG made before weed emergence 
will provide residual control of labeled weeds. Control of emerged weeds will require the addition of spray 
adjuvants, and can be further enhanced with additional tank mix partners. 
 
DO NOT incorporate Resolve SG deeper than 2 inches or weed control may be reduced. 
 
Resolve SG may be tank mixed with preplant/preemergence grass and broadleaf herbicides including 
atrazine, CINCH
® brands and BREAKFREE® NXT brands to provide added residual activity or additional 
burndown activity on emerged weeds. Sequential applications of INSTIGATETM, PREQUEL®, CINCH® 
brands and BREAKFREE® NXT brands may also be made following fallow or preplant applications of 
Resolve SG. Consult tank mix partner labeling for rate and soil-type restrictions. 
 
Sequential Application 
Resolve SG may be used in a sequential herbicide program for corn. Apply Resolve SG for burndown 
and residual weed control, followed by a post, in-crop application of ACCENT
® Q, REALM® Q, Resolve Q 
or STEADFAST® Q herbicides. Refer to the appropriate product label for use restrictions, application

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 13 
 
information, rotational crop guidelines, and cautionary statements prior to application. 
 
Field Corn – Postemergence – Through 2 Collars (V2) Stage 
 
Rate 
Apply Resolve SG up to 1.0 ounce per acre as a postemergence broadcast application. Consult company 
technical bulletins, fact sheets or supplemental labeling for additional application rate information. 
 
Timing to Crop 
Resolve SG may be applied to field corn through the 2 collar (V2) stage. DO NOT apply to corn having 3 
fully emerged collars or over 6" tall whichever is more restrictive. 
 
Field Corn - Postemergence - V3 through V6 Stage - safener required. 
 
Rate 
Apply Resolve SG up to 1.2 ounces per acre as a postemergence broadcast application. 
 
Timing to Crop 
Resolve SG plus safener may be applied to corn that is up to 20 inches tall. DO NOT apply to corn taller 
than 20 inches or exhibiting 7 or more leaf collars, whichever is more restrictive. 
 
Timing to Emerged Weeds 
Apply Resolve SG when grasses are young and actively growing, but before they exceed the sizes listed 
on this label. 
 
On "Roundup Ready" corn glyphosate may be applied with Resolve SG after weeds emerge but before 
they reach the maximum size listed on the glyphosate herbicide label. 
 
On "Liberty Link" corn, glufosinate may be applied with Resolve SG after weeds emerge but before they 
reach the maximum size listed on the glufosinate herbicide label. 
 
Applications made to weed sizes greater than those listed on these product labels may result in 
incomplete control. Grass competition due to incomplete control may reduce yields. 
 
Sequential Application - Postemergence 
Apply ACCENT
® Q herbicide 14 or more days after the Resolve SG application to control grasses that 
may emerge later in the season. Refer to the ACCENT® Q label for grass species controlled, proper size 
of weeds, rates, corn sizes, and other information. 
 
GRAIN SORGHUM (For Use Exclusively in ALS Tolerant Sorghum Seed 
Propagation Fields) 
 
Application Information 
Resolve SG Herbicide, referred to below as “Resolve SG”, is a water soluble granule applied as a foliar 
spray to selectively eliminate plants that do not carry a gene that imparts tolerance to rimsulfuron in ALS 
tolerance trait sorghum seed production fields. Resolve SG may be applied to remove susceptible 
“segregates”, i.e., undesirable sorghum plants that do not contain the ALS tolerance trait, during seed 
propagation. 
 
Precautions 
x Inbred lines or breeding material not possessing the ALS tolerance trait will be severely injured or 
killed if treated with Resolve SG 
 
Restrictions 
x DO NOT make more than 2 applications per acre per crop year.

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 14 
 
x DO NOT apply to sorghum taller than 20 inches. 
x DO NOT use treated sorghum grain, forage, silage, fodder, straw, or hay for food, feed or oil 
purposes. 
x DO NOT graze livestock in treated areas. 
 
Application Directions for Use of Resolve SG for Sorghum Seed Propagation 
 
Use Rate 
For detection and control of susceptible sorghum “segregates”, apply Resolve SG at 0.5 – 1.0 
ounces/acre to sorghum crops containing the ALS tolerance trait. 
 
Tank Mixing 
Refer to the labels of all tank mix products for information regarding use information (such as rates, 
timing, application information, and sprayer cleanup) and product precautions and restrictions. It is the 
pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and 
follow the applicable restrictions and limitations and directions for use on all product labels involved in 
tank mixing. Users must follow the most restrictive directions for use and precautionary statements of 
each product in the tank mixture 
 
Application Timing 
Apply Resolve SG to emerged sorghum that is up to 20 inches tall. DO NOT apply to sorghum taller than 
20 inches. 
 
Best results are obtained when applications are made to actively growing plants. Resolve SG is rainfast 1 
hour after application. 
 
Weeds Controlled 
 
Refer to the Weeds Controlled section for a complete list of weeds controlled. 
 
Important Notes for Resolve Sg Application to Sorghum Which are Being Grown for Propagation 
of Seed Containing the ALS Tolerance Trait: 
1. Apply Resolve SG exclusively to sorghum seed production fields in which the desired plants contain 
the ALS tolerance trait. 
2. Seed from treated plants must only be used for breeding purposes or commercial sorghum hybrids. 
3. Seed from treated plants must be labeled as follows “Do not use for feed, food or oil purposes”. 
 
Spray Adjuvants 
 
For control of emerged weeds, application of Resolve SG must contain an appropriate adjuvant. When 
applied in tank mix combination with a glyphosate (such as ABUNDIT® Extra) or glufosinate herbicide that 
contains a built-in adjuvant system, no additional surfactant needs to be added. Consult local company 
fact sheets, technical bulletins, and service policies prior to using other adjuvant systems. Products must 
contain only EPA-exempt ingredients. 
 
Petroleum Crop Oil Concentrate (COC) or Modified Seed Oil (MSO) 
x Apply at 1% v/v (1 gallon per 100 gallons spray solution) or 2% under arid conditions. 
x MSO adjuvants may be used at 0.5% v/v (0.5 gallon per 100 gallons spray solution) if specifically 
noted on adjuvant product labeling. 
x Oil adjuvants must contain at least 80% high quality, petroleum (mineral) or modified vegetable seed 
oil with at least 15% surfactant emulsifiers. 
 
Nonionic Surfactant (NIS) 
x Apply at 0.25% v/v (1 qt per 100 gal spray solution).

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 15 
 
x Surfactant products must contain at least 60% nonionic surfactant with a hydrophilic/lipophilic balance 
(HLB) greater than 12. 
 
Ammonium Nitrogen Fertilizer 
 
In addition to a spray adjuvant, an ammonium nitrogen fertilizer may be used. 
x Use 2 qt/acre of a high-quality urea ammonium nitrate (UAN) such as 28%N or 32%N, or 2 lb/acre of 
a spray-grade ammonium sulfate (AMS). 
 
Special Adjuvant Types 
x Combination adjuvant products may be used at doses that provide the required amount of NIS and 
ammonium nitrogen fertilizer. Consult product literature for use rates and restrictions. 
 
Weeds Controlled/Suppressed 
 
Resolve SG can be tank mixed with EXPRESS® or PANOFLEXTM herbicide brands, dicamba, 
glyphosate (such as ABUNDIT® Extra herbicide), glufosinate, paraquat, saflufenacil, and/or 2,4-D LVE 
herbicides for improved control of emerged weed species when applied preplant or preemergence. For 
application methods and other use specifications; use the most restrictive label directions for the intended 
combination. 
 
Grasses and Broadleaves Burn down Resolve SG Alone* Burn down when Resolve SG tank mixed with glyphosate 
Alfalfa,volunteer C C 
Barley, volunteer C C 
Barnyardgrass C C 
Bindweed, field S C 
Bluegrass, annual C C 
Buckwheat, common C C 
Buttercup, smallflower C C 
Canola, volunteer C5 C5 
Carpetweed NC C 
Canada thistle S C 
Chamomile, false S C 
Chickweed (common, mouseear) C C 
Cocklebur S C 
Common mallow S C 
Crabgrass C1 C 
Cupgrass, woolly (1”) C C 
Curly Dock C C 
Dandelion (6” diameter) C C 
Eveningprimrose, cutleaf C2 C 
Field pennycress C C 
Filaree, redstem NC C 
Foxtail (bristly, giant, green, yellow) C C 
Geranium, Carolina C C 
Groundsel, common C C 
Henbit C C 
Knotweed, prostrate C C 
Jimsonweed* NC C 
Johnsongrass, seedling S C 
Kochia C3 C 
Lambsquarters, common C C 
Marestail (Horseweed) S C 
Millet, wild proso S C 
Morningglory, ivyleaf S C 
Mustard (birdsrape, black) C C 
Mustard, wild C C 
Nightshade, hairy S C 
Nightshade, black NC C 
Palmer amaranth S4 S4

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 16 
 
Panicum, fall C C 
Pigweed (prostrate, redroot, smooth) C4 C 
Purslane, common S C 
Quackgrass S C 
Ragweed, common S C 
Russian thistle, seedling S C 
Ryegrass, Italian S4 C 
Sandbur (field, longspine) NC C 
Shattercane (4”) C C 
Shepherd’s purse C C 
Signalgrass, broadleaf S C 
Smartweed, Pennsylvania C C 
Smartweed, Ladysthumb C C 
Stinkgrass S C 
Velvetleaf C C 
Wallflower, bushy C C 
Waterhemp S4 S4 
Wheat, volunteer C C 
Wild buckwheat S C 
Wild oat S C 
Wild radish C C 
Yellow nutsedge S C 
C Control S Suppression NC No Control 
* If Resolve SG is applied without a tank mix partner, grasses must be < 2", broadleaves < 3" in height 
1 < 1/2" 
2 Must add 2,4D LVE or dicamba for control 
3 ALS Sensitive kochia only 
4 Resistant biotypes are known to occur 
5 Will not control Clearfield varieties 
 
Grasses and Broadleaves Residual Resolve SG Alone 
Barley, volunteer S 
Barnyardgrass C 
Bluegrass, annual C 
Canola, volunteer C 
Carpetweed S 
Chamomile, false C 
Cocklebur S 
Crabgrass S 
Filaree, redstem C 
Foxtail (bristly, giant, green, yellow) C 
Henbit C 
Jimsonweed S 
Kochia C1 
Lambsquarters, common C 
Marestail (Horseweed) C 
Morningglory, ivyleaf S 
Mustard (birdsrape, black) C 
Nightshade, hairy S 
Palmer amaranth2 S 
Panicum, fall S 
Pigweed (prostrate, redroot, smooth) C 
Purslane, common C 
Ragweed, common S 
Russian thistle, seedling S 
Ryegrass, Italian S2 
Signalgrass, broadleaf C 
Smartweed, Pennsylvania S 
Velvetleaf S 
Waterhemp S2 
Wheat, volunteer C

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 17 
 
Wild oat S 
C Control S Suppression 
1 ALS Sensitive kochia only 
2 Resistant biotypes are known to occur 
 
Mixing Instructions 
 
Fertilizer Carrier Instructions 
Dissolve Resolve SG in water and add to liquid fertilizer for preemergence application. When using liquid 
fertilizer as the carrier, always dissolve Resolve SG in clean water before adding fertilizer solutions. Add 
the dissolved Resolve SG solution to the final complete liquid fertilizer mixture – DO NOT add Resolve 
SG during the fertilizer mixing process. 
 
Always use good agitation while adding the dissolved Resolve SG solution to liquid fertilizers and 
maintain good agitation until sprayed. When using liquid fertilizer as the carrier, conduct a compatibility 
test with all components prior to mixing. 
 
DO NOT use with spray additives or liquid fertilizer carriers that alter the pH of the spray solution below 
pH 5.0 or above pH 9.0 as rapid product degradation can occur. Spray solutions of pH 6.0 -8.0 allow for 
optimum stability of Resolve SG. 
 
Water Carrier Instructions 
1. Fill the tank 1/3 to 1/2 full of clean water. 
2. While agitating, add the required amount of Resolve SG. 
3. Continue agitation until the Resolve SG is fully dissolved, at least 5 minutes. When the water 
temperature is 40o F or less, it is important to allow agitation and mixing to occur for the full 5 
minutes to ensure the product is completely dissolved. 
4. Once the Resolve SG is fully dissolved, maintain agitation and continue filling tank with water. 
Resolve SG should be thoroughly mixed and dissolved with clean water before adding any 
other material such as water conditioners or other additives. 
5. As the tank is filling, add tank mix partners (if desired) in the proper mixing order. 
6. Maintain agitation throughout mixing and application. If the mixture is not continuously agitated, 
settling could occur. If settling occurs, thoroughly re-agitate before using. 
7. At the end of the day, or for extended periods of time between Resolve SG applications, it is 
recommended to flush the boom hoses and lines of pray solution and recharge with clean water. This 
will aid in proper sprayer cleanout when concluding Resolve SG applications before moving on to 
spray other products /crops. 
8. Apply Resolve SG spray mixture within 48 hours of mixing to avoid product degradation. 
 
If the selected companion herbicide has a ground or surface water advisory, consider this advisory when 
using the companion herbicide. 
 
Tank Mix Compatibility Testing 
Perform a jar test prior to tank mixing to ensure compatibility of Resolve SG and other pesticides. Use a 
clear quart jar with lid and mix the tank mix ingredients in their relative proportions. Invert the jar 
containing the mixture several times and observe the mixture for approximately 1/2 hour. If the mixture 
balls-ups, forms flakes, sludge, gel, oily film or layers, or other precipitates, it is not compatible and the 
tank mix combination should not be used. 
 
Ground Application 
When Resolve SG is used alone, use a minimum of 15 gallons of water per acre (GPA) to ensure 
thorough coverage of the weeds and the best performance. Use a minimum of 10 GPA for light, scattered 
stands of weeds. For best performance, select nozzles and pressure that deliver MEDIUM spray droplets, 
as indicated, for example, by ASABE Standard S572.1. Nozzles that deliver COARSE spray droplets may 
be used to reduce drift, provided spray volume is increased to maintain coverage on small weeds.

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 18 
 
 
For optimal product performance and minimal spray drift, adjust the spray boom to the lowest possible 
spray height recommended in manufacturers’ specifications 
 
Aerial Application 
Use nozzle types and arrangements that will provide optimum spray distribution and maximum coverage 
at a minimum of 5 GPA. 
 
DO NOT apply during a temperature inversion, when wind speed is less than 2 mph or above 10 mph, or 
when conditions favor poor coverage and/or offtarget spray movement. 
 
Crop Rotation Restrictions - North 
 
The following rotational intervals must be observed: 
 
Up to 1.0 Oz/A Maximum Use Rate 
 
Rotation Crop Interval (months) 
Corn, field Anytime 
Potatoes 1 
Sulfonylurea Tolerant Soybeans 1 
Cereals, Winter 3 
Cereals, Spring 9 
Corn, pop, seed or sweet 10 
Flax 10 
Peas 10 
Sorghum 10 
Snap beans, dry beans 10 
Soybeans 10 
Sunflower 10 
Sugarbeets 18 
Alfalfa 18 
Canola 18 
Crops Not Listed 18 
 
Crop Rotation Restrictions for Certain Areas of Oregon and Washington 
Field corn grown under sprinkler irrigation with a minimum of 18 inches of water per season. This rotation 
interval is for sand, loamy sand and sandy loam soils having not more than 1.5% organic matter here a 
minimum of 18 inches of sprinkler irrigation is used on the previous corn crop. Injury to the rotated crop 
may occur if less than 18 inches of irrigation is used on the previous field corn crop. For tank mixtures, 
follow the most restrictive rotational crop guideline. 
 
The following revised rotational intervals must be observed when using Resolve SG on field corn: 
 
Rotation Crop Interval (months) 
Alfalfa 4 
Carrots 10 
Cucumber 10 
Grass, pasture, hay, seed 4 
Mint 4 
Onions 10 
Peas 8 
 
For Rotation to Alfalfa: Resolve SG in field corn not to exceed 1.0 ounces per use season in Adams, 
Grant, Douglas and Lincoln counties of Washington, and Resolve SG in field corn not to exceed 1.5 
ounces per acre per use season in Benton, Franklin, Klickitat, Walla Walla and Yakima counties in 
Washington and Morrow and Umatilla counties in Oregon.

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 19 
 
For Rotation to Onions and Carrots: Resolve SG in field corn not to exceed 1.5 ounces per acre per use 
season in Adams, Grant, Douglas and Lincoln counties of Washington, and Resolve SG in field corn not 
to exceed 2.0 ounces per acre per season in Benton, Franklin, Klickitat, Walla Walla and Yakima counties 
in Washington and Morrow and 
 
Umatilla counties in Oregon. 
 
For Rotation to Grass Crops Grown for Seed, Hay or Pasture: Resolve SG in field corn not to exceed 1.5 
ounces per acre per use season in Adams, Grant, Douglas and Lincoln counties of Washington, and 
Resolve SG in field corn not to exceed 2.0 ounces per acre per use season in Benton, Franklin, Klickitat, 
Walla Walla and Yakima counties in Washington and Morrow and Umatilla counties in Oregon. 
 
For Rotation to Peas and Mints: Resolve SG in field corn not to exceed 1.5 ounces per acre per use 
season in all areas. 
 
Precaution 
Resolve SG should not be used in a tank mix or sequential application program with other soil residual 
ALS inhibiting herbicides in field corn as the combined effects of these herbicides on the planting of 
subsequent crops have not been thoroughly investigated and injury to the following rotation crop may 
occur. 
 
Crop Rotation Restrictions - Midwest and South 
 
The following rotational intervals must be observed: 
 
Up to 1.0 Oz Maximum Use Rate 
 
Rotation Crop Interval (months) 
Corn, field Anytime 
Potatoes 1 
Sulfonylurea Tolerant Soybeans 1 
Cotton † † 1 
Tomato 1 
Cereals, Winter 3 
Cereals, Spring 9 
Alfalfa* † 10 
Canola † 10 
Corn, pop seed or sweet 10 
Cucumber 10 
Flax 10 
Peas 10 
Peanuts 10 
Rice 10 
Red Clover † 10 
Sorghum † 10 
Soybeans † † † § 10 
Snap beans, dry beans 10 
Sunflower 10 
Sugarbeets † 10 
Sweet potatoes/yams** 10 
Tobacco 10 
Crops Not Listed 18 
* On sprinkler irrigated fields in Idaho, Utah, and Northern Nevada it is best to use deep fall tillage such as plowing 
prior to planting alfalfa. Product degradation may be less on furrow irrigated soils and may result in some crop injury. 
**On soils with pH 6.5 or less 
†The rotation interval must be extended to 18 months if drought conditions prevail after application and before the 
rotational crop is planted, unless sprinkler irrigation has been applied and totals greater than 15" during the growing

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 20 
 
season. 
††Except in Oklahoma and Texas west of Route 183, where the rotational interval is 10 months. 
†††In the states of AL, AR, GA, KY, LA, MO (bootheel), MS, NC, SC, and TN and in the states of Oklahoma and 
Texas east of I-35 (including the counties containing I-35) the rotational interval to cotton and soybeans is 1 month. In 
the states of KS and OK the counties containing HWY 81 and east and in MO (excluding the bootheel), IL, IN, OH, 
and WV the counties that contain I-70 and south and the states of DE, MD and VA, the recrop is 2 months. 
§ Rotational interval is 15 days if using .66 oz per acre. 
 
Greater than 1.0 Oz/A Up to 2.0 OZ/A Maximum Use Rate - All Areas 
 
The following rotational intervals must be observed: 
 
Rotation Crop Interval (months) 
Corn, field Anytime 
Potatoes 1 
Tomato 1 
Sulfonylurea Tolerant Soybean 2 
Cereals, Winter 3 
Cereals, Spring 9 
Corn pop, seed or sweet 10 
Cotton †* 10 
Cucumber 10 
Flax 10 
Soybeans * 10 
Snap beans, dry beans 10 
Sunflower 10 
Crops Not Listed 18 
† The rotation interval must be extended to 18 months if drought conditions prevail after application and before the rotational crop is 
planted, unless sprinkler irrigation has been applied and totals greater than 15" during the growing season. 
* In the states of AL, AR, GA, KY, LA, MO (bootheel), MS, NC, SC, and TN if a maximum use rate of 1.3 oz/A is used the rotational 
interval is 2 months. 
 
Sprayer Preparation/Cleanup 
 
The spray equipment must be cleaned before Resolve SG is sprayed. Follow the cleanup procedures 
specified on the labels of the previously applied products. 
 
It is recommended that during periods when multiple loads of Resolve SG herbicide are applied, at the 
end of each day of spraying, the interior of the tank be rinsed with fresh water and then partially filled, and 
the boom and hoses flushed. This will prevent the buildup of dried pesticide deposits, which can 
accumulate in the application equipment. 
 
To avoid subsequent injury to desirable crops, thoroughly clean all mixing and spray equipment 
immediately following applications of Resolve SG as follows: 
1. Empty the tank and drain the sump completely. 
2. Spray the tank walls with clean water using a minimum volume of 10% of the tank volume. Circulate 
the water through the lines, including all by-pass lines, for at least two minutes. Flush the boom well 
and empty the sprayer. Completely drain the sump. 
3. Repeat step 2. 
4. Remove the nozzles and screens and the end caps of sprayer booms and clean separately in a 
bucket containing water. 
 
The rinsate solution may be applied back to the crop(s) listed on this label. DO NOT exceed the maximum 
labeled use rate. If cleaners are used, consult the cleaner label for rinsate disposal instructions. If no 
instructions are given, dispose of the rinsate on site or at an approved waste disposal facility. 
 
Notes:

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 21 
 
1. Always start with a clean spray tank, hoses, boom and nozzles. Ensure boom sections between end 
nozzles and the end of the boom are clean of deposits (it is recommended to remove end caps and 
visually inspect). If needed, thoroughly flush rinse water through the boom sections with the end caps 
removed to ensure booms are clean and free of any residue or deposits. 
2. Steam-cleaning the aerial spray tank is recommended to facilitate the removal of any caked deposits. 
3. When Resolve SG is tank mixed with other pesticides, all cleanout procedures for each product 
should be examined and the most rigorous procedure should be followed. 
4. Follow any pre-cleanout guidelines recommended on other product labels. 
 
SPRAY DRIFT MANAGEMENT 
 
Ground Boom Applications: 
x Apply with the nozzle height recommended by the manufacturer, but no more than 3 feet above the 
ground or crop canopy unless making a rangeland application, in which case applicators may apply 
with a nozzle height no more than 4 feet above the ground. 
x For applications prior to the emergence of crops and target weeds, applicators are required to use 
a Coarse or coarser droplet size (ASABE S572.1). 
x For all other applications, applicators are required to use a Medium or coarser droplet size (ASABE 
S572.1). 
x DO NOT apply when wind speeds exceed 10 miles per hour at the application site. 
x DO NOT apply during temperature inversions. 
 
Aerial Applications: 
x DO NOT release spray at a height greater than 10 feet above the vegetative canopy, unless a 
greater application height is necessary for pilot safety. 
x For applications prior to the emergence of crops and target weeds, applicators are required to use 
a Coarse or coarser droplet size (ASABE S572.1). 
x For all other applications, applicators are required to use a Medium or coarser droplet size (ASABE 
S572.1). 
x The boom length must not exceed 65% of the wingspan for airplanes or 75% of the rotor blade 
diameter for helicopters. 
x Applicators must use one-half swath displacement upwind at the downwind edge of the field. 
x Nozzles must be oriented so the spray is directed toward the back of the aircraft. 
x DO NOT apply when wind speeds exceed 10 miles per hour at the application site. 
x DO NOT apply during temperature inversions. 
 
Boom-less Ground Applications: 
x Applicators are required to use a Medium or coarser droplet size (ASABE S572.1) for all 
applications. 
x DO NOT apply when wind speeds exceed 10 miles per hour at the application site.
x DO NOT apply during temperature inversions. 
 
Spray Drift Advisories 
 
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT. 
BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS. 
 
Importance of Droplet Size 
An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide 
target pest control. While applying larger droplets will reduce spray drift, the potential for drift will be 
greater if applications are made improperly or under unfavorable environmental conditions.

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 22 
 
Controlling Droplet Size – Ground Boom 
x Volume - Increasing the spray volume so that larger droplets are produced will reduce spray drift. 
Use the highest practical spray volume for the application. If a greater spray volume is needed, 
consider using a nozzle with a higher flow rate. 
x Pressure - Use the lowest spray pressure recommended for the nozzle to produce the target spray 
volume and droplet size. 
x Spray Nozzle - Use a spray nozzle that is designed for the intended application. Consider using 
nozzles designed to reduce drift. 
 
Controlling Droplet Size – Aircraft 
x Adjust Nozzles - Follow nozzle manufacturers recommendations for setting up nozzles. Generally, to 
reduce fine droplets, nozzles should be oriented parallel with the airflow in flight. 
 
Boom Height – Ground Boom 
Use the lowest boom height that is compatible with the spray nozzles that will provide uniform coverage. 
For ground equipment, the boom should remain level with the crop and have minimal bounce. 
 
Release Height – Aircraft 
Higher release heights increase the potential for spray drift. When applying aerially to crops, do not 
release spray at a height greater than 10 ft above the crop canopy, unless a greater application height is 
necessary for pilot safety. 
 
Boom-less Ground Applications: 
x Setting nozzles at the lowest effective height will help to reduce the potential for spray drift. 
 
Handheld Technology Applications: 
x Take precautions to minimize spray drift. 
 
Shielded Sprayers 
Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify 
that the shields are not interfering with the uniform deposition of the spray on the target area. 
 
Temperature and Humidity 
When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation. 
 
Temperature Inversions 
Drift potential is high during a temperature inversion. Temperature inversions are characterized by 
increasing temperature with altitude and are common on nights with limited cloud cover and light to no 
wind. The presence of an inversion can be indicated by ground fog or by the movement of smoke from a 
ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated 
cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly 
dissipates indicates good vertical air mixing. Avoid applications during temperature inversions. 
 
Wind 
Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND 
CONDITIONS. Applicators need to be familiar with local wind patterns and terrain that could affect spray 
drift. 
 
Sensitive Areas 
Making applications when there is a sustained wind moving away from adjacent sensitive areas (e.g., 
residential areas, bodies of water, known habitat for threatened or endangered species, non-target crops) 
is an effective way to minimize the effect of spray drift. 
 
Drift Control Additives 
Using product compatible drift control additives can reduce drift potential. When a drift control additive is 
used, read and carefully observe cautionary statements and all other information on the additive’s label. If

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 23 
 
using an additive that increases viscosity, ensure that the nozzles and other application equipment will 
function properly with a viscous spray solution. Preferred drift control additives have been certified by the 
Chemical Producers and Distributors Association (CPDA). 
 
 
 Terms and Conditions of Use 
If terms of the following Warranty Disclaimer, Inherent Risks of Use, and Limitation of Remedies are not 
acceptable, return unopened package at once to the seller for a full refund of purchase price paid. To the 
extent permitted byconsistent with applicable law, use by the buyer or any other user constitutes 
acceptance of the terms under Warranty Disclaimer, Inherent Risks of Use and Limitations of Remedies. 
 
 Warranty Disclaimer 
Corteva Agriscience warrants that this product conforms to the chemical description on the label and is 
reasonably fit for the purposes stated on the label when used in strict accordance with the directions for 
use, subject to the inherent risks set forth below. To the extent permitted byconsistent with applicable 
law, Corteva Agriscience MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER EXPRESS OR 
IMPLIED WARRANTY. 
 
 Inherent Risks of Use 
It is impossible to eliminate all risks associated with use of this product. Plant injury, lack of performance, 
or other unintended consequences may result because of such factors as use of the product contrary to 
label instructions (including conditions noted on the label, such as unfavorable temperatures, soil 
conditions, etc.), abnormal conditions (such as excessive rainfall, drought, tornadoes, hurricanes), 
presence of other materials, the manner of application or other factors, all of which are beyond the control 
of Corteva Agriscience or the seller. To the extent consistent with applicable law, Corteva Agriscience will 
not be responsible for losses or damages resulting from the use of this product in any manner not 
specifically directed by Corteva Agriscience. To the extent permitted byconsistent with applicable law, all 
such risks associated with non-directed use shall be assumed by buyer and/or user. 
 
 Limitation of Remedies 
To the extent permitted byconsistent with applicable law, the exclusive remedy for losses or damages 
resulting from this product (including claims based on contract, negligence, tort, strict liability, or other 
legal theories), shall be limited to, at Corteva Agriscience’s election, one of the following: 
 
1. Refund of purchase price paid by buyer or user for product bought, or 
2. Replacement of product used. 
 
To the extent permitted byconsistent with applicable law, Corteva Agriscience shall not be liable for 
losses or damages resulting from handling or use of this product unless Corteva Agriscience is promptly 
notified of such loss or damage in writing. To the extent permitted byconsistent with applicable law, in no 
case shall Corteva Agriscience be liable for consequential, incidental or special damages or losses. 
 
The terms of the Warranty Disclaimer, Inherent Risks of Use, and Limitation of Remedies cannot be 
varied by any written or verbal statements or agreements. No employee or sales agent of Corteva 
Agriscience or the seller is authorized to vary or exceed the terms of the Warranty Disclaimer or this 
Limitation of Remedies in any manner. 
 
™®Trademarks of Corteva Agriscience and its affiliated companies 
 
For product information call: 1-800-258-3033 
 
Produced for 
Corteva Agriscience LLC 
9330 Zionsville Road 
Indianapolis, IN 46268

E96 / Resolve® SG / Notification with edits / 03-22-23 Page 24 
 
EPA accepted 03/13/2023_