# A20903A

- EPA Reg No: **100-1587**
- Registrant: SYNGENTA CROP PROTECTION, LLC
- Signal word: Caution
- Active ingredients: Thiamethoxam (22.8%); Fludioxonil (2.17%); Sedaxane (2.17%)
- Label accepted: 2026-07-09
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000100-01587-20260709.pdf

---
July 9, 2026
Patsy Laird
Regulatory Manager, Seedcare
Syngenta Crop Protection, LLC
P.O. Box 18300
Greensboro, NC 27419
Subject: Label Amendment - Registration Review Mitigation for Sedaxane
 Product Name: A20903A
EPA Registration Number: 100-1587
 Application Date: February 13, 2026
Case Number: 684606
Dear Mrs. Patsy Laird:
The Agency, in accordance with the Federal Insecticide, Fungicide, and Rodenticide Act 
(FIFRA), as amended, has completed reviewing all the information submitted with your 
application to support the Registration Review of the above referenced product in 
connection with the Sedaxane Interim Decision, and has concluded that your submission 
is acceptable. The label referred to above, submitted in connection with registration under 
FIFRA, as amended, is acceptable.
Should you wish to add/retain a reference to the company’s website on your label, then 
please be aware that the website becomes labeling under the Federal Insecticide, 
Fungicide, and Rodenticide Act and is subject to review by the Agency. If the website is
false or misleading, the product would be misbranded and unlawful to sell or distribute 
under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) list examples of statements EPA may 
consider false or misleading. In addition, regardless of whether a website is referenced on 
your product’s label, claims made on the website may not substantially differ from those 
claims approved through the registration process. Therefore, should the Agency find or if it 
is brought to our attention that a website contains false or misleading statements or 
claims substantially differing from the EPA approved registration, the website will be 
referred to the EPA’s Office of Enforcement and Compliance Assurance.

Page 2 of 2 
EPA Reg. No. 100-1587 
Decision No. 684606 
 
A stamped copy of your labeling is enclosed for your records. This labeling 
supersedes all previously accepted labeling and must be used at your next label 
printing. You must submit one copy of the final printed labeling before you release 
the product for shipment with the new labeling. In accordance with 40 CFR 
152.130(c), you may distribute or sell this product under the previously approved 
labeling for 12 months from the date of this letter. After 12 months, you may only 
distribute or sell this product if it bears this new revised labeling or subsequently 
approved labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and 
its implementing regulation at 40 CFR 152.3. 
 
If you have any questions about this letter, please contact Samantha Carter by phone at 
202-566-1179, or via email at carter.samantha@epa.gov. 
 
 
 S i n c e r e l y , 
 
 
 
 Jaclyn Pyne, Team Leader 
 R i s k M a n a g e m e n t a n d I m p l e m e n t a t i o n B r a n c h 3 
 P e s t i c i d e R e - E v a l u a t i o n D i v i s i o n 
 O f f i c e o f P e s t i c i d e P r o g r a m s
 
 
ENCLOSURE: Stamped label

(Master label)
THIAMETHOXAM GROUP 4A INSECTICIDE
SEDAXANE GROUP 7 FUNGICIDE
FLUDIOXONIL GROUP 12 FUNGICIDE
A20903A
Insecticide with Fungicides
A seed treatment product for protection against damage from listed insects and
diseases on cereals.
Active Ingredients:
Fludioxonil
1...................................................................................... 2.17%
Sedaxane2....................................................................................... 2.17%
Thiamethoxam3 ............................................................................. 22.80%
Other Ingredients: 72.86%
Total: 100.00%
1CAS No. 131341-86-1
2CAS No. 874967-67-6
3CAS No. 153719-23-4
A20903A is a flowable concentrate for seed treatment containing 0.21 lb fludioxonil, 
0.21 lb sedaxane and 2.19 lb thiamethoxam per gallon.
KEEP OUT OF REACH OF CHILDREN
CAUTION
See additional precautionary statements and directions for use in booklet [on label].
EPA Reg. No. 100-1587
EPA Est. XXXXX
SCP 
Net Contents
[Batch Code: ________] (For nonrefillables only.)
Jul 09, 2026
100-1587

A20903A 
Page 2 
FIRST AID 
If swallowed x Call a poison control center or doctor immediately for 
treatment advice. 
x Have person sip a glass of water if able to swallow. 
x Do not induce vomiting unless told to by a poison control 
center or doctor. 
x Do not give anything by mouth to an unconscious person. 
Have the product container or label with you when calling a poison control center or 
doctor, or going for treatment. 
HOTLINE NUMBER 
For 24-Hour Medical Emergency Assistance (Human or Animal) or 
Chemical Emergency Assistance (Spill, Leak, Fire, or Accident), 
Call 
1-800-888-8372 
 
 
PRECAUTIONARY STATEMENTS 
 
Hazards to Humans and Domestic Animals 
 
CAUTION 
 
Harmful if swallowed. Wash thoroughly with soap and water after handling and before 
eating, drinking, chewing gum, using tobacco or using the toilet. Remove and wash 
contaminated clothing before reuse. 
 
 
PERSONAL PROTECTIVE EQUIPMENT (PPE) 
 
Applicators and other handlers must wear: 
 
x Long-sleeved shirt and long pants 
x Chemical-resistant gloves: b DUULHUODPLQDWHEXW\OUXEEHU•PLOVQHRSUHQHUXEEHU
•14 mils, nitrile rubber •14 mils, polyvinyl chloride (PVC) •14 mils, or Viton™ •
mils 
x Shoes plus socks 
 
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions 
for washables exist, use detergent and hot water. Keep and wash PPE separately from 
other laundry.

A20903A 
Page 3 
ENGINEERING CONTROLS 
 
When handlers use closed systems in a manner that meets the requirements listed in 
the Worker Protection Standard (WPS) for agricultural pesticides (40 CFR 170.607 (d) 
and (e)), the handler PPE requirements may be reduced or modified as specified in the 
WPS. 
 
USER SAFETY RECOMMENDATIONS 
 
Users should: 
 
x Wash hands before eating, drinking, chewing gum, using tobacco or using the 
toilet. 
x Remove clothing/PPE immediately if pesticide gets inside. Then wash 
thoroughly and put on clean clothing. 
x Remove PPE immediately after handling this product. Wash the outside of 
gloves before removing. As soon as possible, wash thoroughly and change 
into clean clothing. 
 
 
ENVIRONMENTAL HAZARDS 
 
This pesticide is toxic to wildlife, fish, oysters and shrimp and highly toxic to aquatic 
invertebrates. Do not contaminate water when disposing of equipment washwater or 
rinsate. Treated seed exposed on soil surface may be hazardous to birds or other 
wildlife. Cover or collect seeds spilled during loading. 
 
Pollinator Precautions 
 
Thiamethoxam is highly toxic to bees, and effects may be possible as a result of 
exposure to translocated residues in blooming crops. 
 
Groundwater Advisory 
 
Fludioxonil has properties and characteristics associated with chemicals detected in 
groundwater. This chemical may leach into groundwater if used in areas where soils are 
permeable, particularly where the water table is shallow. 
 
Thiamethoxam has properties and characteristics associated with chemicals detected in 
groundwater. This chemical may leach into groundwater if used in areas where soils are 
permeable, particularly where the water table is shallow. 
 
Physical and Chemical Hazards 
Do not mix or allow coming in contact with oxidizing agent. Hazardous chemical 
reaction may occur.

A20903A 
Page 4 
CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY 
 
NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation of 
Warranty and Liability before buying or using this product. If the terms are not acceptable, 
return the product at once, unopened, and the purchase price will be refunded. 
 
The Directions for Use of this product must be followed carefully. It is impossible to 
eliminate all risks inherently associated with the use of this product. Crop injury, 
ineffectiveness or other unintended consequences may result because of such factors as 
manner of use or application, weather or crop conditions, presence of other materials or 
other influencing factors in the use of the product, which are beyond the control of 
SYNGENTA CROP PROTECTION, LLC or Seller. To the extent permitted by applicable 
law, Buyer and User agree to hold SYNGENTA and Seller harmless for any claims 
relating to such factors. 
 
SYNGENTA warrants that this product conforms to the chemical description on the label 
and is reasonably fit for the purposes stated in the Directions for Use, subject to the 
inherent risks referred to above, when used in accordance with directions under normal 
use conditions. To the extent permitted by applicable law: (1) this warranty does not 
extend to the use of the product contrary to label instructions, or under conditions not 
reasonably foreseeable to or beyond the control of Seller or SYNGENTA, and (2) Buyer 
and User assume the risk of any such use. TO THE EXTENT PERMITTED BY 
APPLICABLE LAW, SYNGENTA MAKES NO WARRANTIES OF MERCHANTABILITY 
OR OF FITNESS FOR A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR 
IMPLIED WARRANTY EXCEPT AS WARRANTED BY THIS LABEL. 
 
To the extent permitted by applicable law, in no event shall SYNGENTA be liable for any 
incidental, consequential or special damages resulting from the use or handling of this 
product. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THE EXCLUSIVE 
REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY OF 
SYNGENTA AND SELLER FOR ANY AND A LL CLAIMS, LOSSES, INJURIES OR 
DAMAGES (INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, 
CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) 
RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SHALL BE THE 
RETURN OF THE PURCHASE PRICE OF THE PRODUCT OR, AT THE ELECTION OF 
SYNGENTA OR SELLER, THE REPLACEMENT OF THE PRODUCT. 
 
SYNGENTA and Seller offer this product, and Buyer and User accept it, subject to the 
foregoing Conditions of Sale and Limitation of Warranty and Liability, which may not be 
modified except by written agreement signed by a duly authorized representative of 
SYNGENTA.

A20903A 
Page 5 
DIRECTIONS FOR USE 
 
It is a violation of federal law to use this product in a manner inconsistent with its 
labeling. 
 
Use is permitted on-farm and in commercial seed treatment facilities. Do not use for at-
plant applications (e.g. hopper box, planter box, etc.). This product is to be applied as a 
water-based slurry through standard slurry- or mist-type commercial seed treatment 
equipment. 
 
Do not apply this product in a way that will contact workers or other persons, either 
directly or through drift. Only protected handlers may be in the area during application. 
For any requirements specific to your State or Tribe, consult the agency responsible for 
pesticide regulation. 
 
FAILURE TO FOLLOW THE DIRECTIONS FOR USE AND PRECAUTIONS ON THIS 
LABEL MAY RESULT IN CROP INJURY, POOR INSECT AND/OR DISEASE 
CONTROL, AND/OR ILLEGAL RESIDUES. 
 
 
AGRICULTURAL USE REQUIREMENTS 
 
Use this product only in accordance with its labeling and with the Worker Protection 
Standard, 40 CFR part 170. This Standard contains requirements for the protection of 
agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of 
agricultural pesticides. It contains requirements for training, decontamination, 
notification, and emergency assistance. It also contains specific instructions and 
exceptions pertaining to the statements on this label about personal protective 
equipment (PPE), notification to workers, and restricted-entry interval. The requirements 
in this box only apply to uses of this product that are covered by the Worker Protection 
Standard. 
 
Do not enter or allow worker entry into treated areas during the restricted entry 
interval (REI) of 48 hours. Exception: If the seed is treated with the product and the 
treated seed is soil-injected or soil-incorporated, the Worker Protection Standard, under 
certain circumstances, allows workers to enter the treated area if there will be no 
contact with anything that has been treated. 
 
PPE required for early entry to treated areas that is permitted under the Worker 
Protection Standard and that involves contact with anything that has been treated, such 
as plants, soil, or water is: 
 
x Coveralls 
x Chemical-resistant gloves: b DUULHUODPLQDWHEXW\OUXEEHU•PLOVQHRSUHQH
UXEEHU•14 mLOVQLWULOHUXEEHU•14 mils, polyvinyl chloride (PVC) •PLOVRU
9LWRQ•14 mils 
x Shoes plus socks

A20903A 
Page 6 
Treatment of highly mechanically scarred or damaged seed or seed known to be of low 
vigor and poor quality may result in reduced germination and/or reduction of seed and 
seedling vigor. Treat a quantity of seed using equipment similar to that planned for 
treating the total seed lot. Prior to treatment, conduct germination tests on a portion of 
seed before committing the total seed lot to a selected seed treatment. 
 
Due to seed quality, crop or variety sensitivity, and seed storage conditions beyond the 
control of Syngenta, no claims are made to guarantee the germination of carry-over 
seed or propagating material for all crop seed when treated with A20903A. 
 
 
PRODUCT INFORMATION 
 
A20903A is a seed treatment product containing the active ingredients: Fludioxonil and 
Sedaxane fungicides and Thiamethoxam insecticide. A20903A protects against damage 
from listed early-season insects and seed-borne and seedling diseases of cereals. 
 
Fludioxonil fungicide is active against Fusarium and Rhizoctonia species. 
 
Sedaxane fungicide is active against seed decay, seedling blight and damping-off 
caused by Rhizoctonia species and listed loose smut diseases on cereals (Ustilago 
nuda and Ustilago tritici). 
 
Thiamethoxam is a systemic seed treatment insecticide belonging to the neonicotinoid 
class of chemistry. Thiamethoxam protects against listed chewing and sucking insects 
through contact and ingestion. 
 
 
RESISTANCE MANAGEMENT 
 
THIAMETHOXAM GROUP 4A INSECTICIDE 
 
For resistance management, A20903A contains a Group 4A/thiamethoxam insecticide. 
Any insect population may contain individuals naturally resistant to A20903A and other 
Group 4A insecticides. The resistant individuals may dominate the insect population if 
this group of insecticides are used repeatedly in the same fields. Appropriate 
resistance-management strategies should be followed. 
 
Thiamethoxam is a systemic insecticide belonging to the neonicotinoid class of 
chemistry which includes nicotinic acetylcholine receptor (nAChR) agonists. 
 
To delay insecticide resistance, take the following steps: 
 
x Rotate the use of A20903A or other Group 4A insecticides within a growing 
season, or among growing seasons, with different groups that control the same 
pests.

A20903A 
Page 7 
x Use tank mixtures with insecticides from a different group that are equally 
effective on the target pest when such use is permitted. Do not rely on the same 
mixture repeatedly for the same pest population. Consider any known cross-
resistance issues (for the targeted pests) between the individual components of a 
mixture. In addition, consider the following recommendations provided by the 
Insecticide Resistance Action Committee (IRAC): 
o Individual insecticides selected for use in mixtures should be highly 
effective and be applied at the rates at which they are individually 
registered for use against the target species. 
o Mixtures with components having the same IRAC mode of action 
classification are not recommended for insect resistance management. 
o When using mixtures, consider any known cross-resistance issues 
between the individual components for the targeted pest(s). 
o Mixtures become less effective if resistance is already developing to one 
or both active ingredients, but they may still provide pest management 
benefits. 
o The insect resistance management benefits of an insecticide mixture are 
greatest if the two components have similar periods of residual insecticidal 
activity. Mixtures of insecticides with unequal periods of residual 
insecticide activity may offer an insect resistance management benefit 
only for the period where both insecticides are active. 
x Adopt an integrated pest management program for insecticide use that includes 
scouting, uses historical information related to pesticide use, crop rotation, record 
keeping, and which considers cultural, biological and other chemical control 
practices. 
x Monitor after application for unexpected target pest survival. If the level of 
survival suggests the presence of resistance, consult with your local university 
specialist or certified pest control advisor. 
x Contact your local extension specialist or certified crop advisors for any 
additional pesticide resistance-management and/or IPM recommendations for 
the specific site and pest problems in your area. 
 
For additional information on Insecticide Resistance Management: 
x Contact Syngenta representatives at 1-866-796-4368 
x Visit the Insecticide Resistance Action Committee (IRAC) on the web at: 
http://www.irac-online.org 
 
Syngenta encourages responsible product stewardship to ensure effective long term 
control of the insect pests on this label.

A20903A 
Page 8 
SEDAXANE GROUP 7 FUNGICIDE 
FLUDIOXONIL GROUP 12 FUNGICIDE 
 
For resistance management, please note that A20903A contains both a Group 
7/sedaxane and Group 12/fludioxonil fungicide. Any fungal population may contain 
individuals naturally resistant to A20903A and other Group 7 or Group 12 fungicides. A 
gradual or total loss of pest control may occur over time if these fungicides are used 
repeatedly in the same fields. Appropriate resistance-management strategies should be 
followed. 
 
Sedaxane is a succinate dehydrogenase inhibitor (SDHI) and belongs to the 
carboxamide class of chemistry which disrupts cellular respiration and energy 
generation. Fludioxonil belongs to the phenylpyrrole class of chemistry which interferes 
with osmotic signal transduction. 
 
To delay fungicide resistance, take one or more of the following steps: 
 
x Rotate the use of A20903A or other Group 7 or Group 12 fungicides within a growing 
season sequence with different groups that control the same pathogens. 
x Use tank mixtures with fungicide from a different group that are equally effective on 
the target pest when such use is permitted. Use at least the minimum application 
rate as labeled by the manufacturer. 
x Adopt an integrated disease management program for fungicide/insecticide use that 
includes scouting, uses historical information related to pesticide use, and crop 
rotation, and which considers host plant resistance, impact of environmental 
conditions on disease development, disease thresholds, as well as cultural, 
biological and other chemical control practices. 
x Where possible, make use of predictive disease models to effectively time 
fungicide/insecticide applications. Note that using predictive models alone is not 
sufficient to manage resistance. 
x Monitor treated fungal/insect populations for resistance development. 
x Contact your local extension specialist or certified crop advisor for any additional 
pesticide resistance-management and/or IPM recommendations for specific crop 
and pathogens. 
x For further information or to report suspected resistance contact Syngenta at 1-866-
Syngent(a) (866-796-4368). You can also contact your pesticide distributor or 
university extension specialist to report resistance. 
 
Syngenta encourages responsible product stewardship to ensure effective long term 
control of the fungal diseases on this label.

A20903A 
Page 9 
CROP ROTATIONAL RESTRICTIONS 
 
In the event of crop failure or harvest of a crop grown from seed treated with A20903A, 
crops may be replanted according to the following schedule: 
 
Plantback Interval Table 
Immediate Plantback Minimum 30-Day 
Plantback Interval 
Canola 
Cereal Grains: Barley, Corn (Field, 
Pop, Sweet), Oats, Rye, Sorghum, 
Triticale, and Wheat 
Cotton 
Dried Shelled Pea and Bean Crop 
Subgroup 6C 
Oilseeds: Borage, Crambe, Flax Seed, 
and Mustard Seed 
Potato 
Soybean 
Sugarbeet 
Alfalfa 
Brassica (Cole) Leafy Vegetables 
Crop Group 5 
Cereal Grains Crop Group 15 
Cucurbit Vegetables Crop Group 9 
Fruiting Vegetables Crop Group 8 
Dry Bulb Onion 
Leafy Vegetables Crop Group 4 
Legume Vegetables (Succulent or 
Dried) Crop Group 6 
Mint: Peppermint and Spearmint 
Peanut 
Root Vegetables Crop Subgroup 
1A 
Safflower 
Strawberry 
Sunflower 
Tobacco 
Tuberous and Corm Vegetables 
Crop Subgroup 1C 
 
For any other crops the minimum plant back interval is 120 days from the date seeds 
treated with A20903A were planted. A cover crop other than the crops listed above that 
is planted for erosion control or soil improvement may be planted sooner than the 120-
day interval; however, the crop may not be grazed or harvested for food or feed. 
 
MIXING PROCEDURES 
 
Important: Always re-circulate A20903A thoroughly before using. 
 
Follow the manufacturer’s application instructions for the seed treatment equipment 
being used. 
 
Apply A20903A as a water-based slurry utilizing standard slurry seed treatment 
equipment which provides uniform seed coverage. Uneven or incomplete seed 
coverage may not give the desired level of insect or disease control. Thoroughly mix the 
specified amount of A20903A into the required amount of water or liquid inoculant for 
the slurry treater and dilution rate to be used. 
 
Certain crops require addition of inoculants when the seed is treated or planted. 
A20903A is compatible with several liquid inoculant products. Consult the maker of the 
inoculant product and a Syngenta representative for directions before applying 
A20903A with inoculants.

A20903A 
Page 10 
The total application volume must be sufficient to provide desired level of coverage. 
Dilution is typically done with water or liquid inoculants. 
 
Continuous agitation or mixing of the slurry mixture is necessary to prevent settling out 
of the solution. Clean out any unused product from the treater after treating or maintain 
constant agitation if the leftover slurry will be maintained overnight. 
 
Required Dye Statement: Seed treated with this product must be visually identifiable 
from untreated seed by the use of an approved colorant or dye to prevent accidental 
use of treated seed as food for humans or feed for animals. Refer to 21 CFR, Part 2.25. 
Any colorant or dye added to treated seed must be cleared for use in accordance with 
40 CFR, Part 153.155(c). 
Allow seed to dry before bagging.

A20903A 
Page 11 
SEED CONTAINER LABEL REQUIREMENTS 
 
Use of On-Farm Treated Seed (when treated seed are not for sale or distribution) 
Treated seed sold or distributed for a use not permitted by the following labeling does 
not qualify as an exempted treated article under 40 CFR 152.25(a) and is therefore sale 
or distribution of an unregistered pesticide, pursuant to FIFRA section 12. 
 
x Store treated seed away from food and feedstuffs. 
x DO NOT allow children, pets, or livestock to have access to treated seed. 
x Treated seed are for planting purposes only. DO NOT use for food, feed, or oil 
purposes. DO NOT use treated seed for fuel or ethanol production purposes. 
x Wear long-sleeved shirt, long pants, sh oes, socks, and chemical-resistant gloves 
when handling treated seed. 
x DO NOT plant treated seed by broadcasting to the soil surface. Ensure that all 
planted seeds are thoroughly incorporated by the planter during planting. Additional 
incorporation may be required to thoroughly cover exposed seeds. 
x Treated seed exposed on the soil surface may be hazardous to wildlife. Cover or 
collect treated seed spilled during loading and planting (such as in row ends). 
x Treated seed must be planted into the soil at a depth greater than 1 inch. 
x Manage excess treated seed (e.g., spilled, unused, or expired treated seed) by one 
or more of the following methods: 
o Collect excess treated seed for reuse for planting. 
o Bury excess treated seed (only allowed if totaling 1 pound or less) at least 30 feet 
away from bodies of water at a depth of 6 inches or double the planting depth, 
whichever is greater. 
o Dispose of excess treated seed by placing them in a landfill in accordance with 
applicable laws in your state. 
o Return excess treated seed to the supplier if permitted by the state. 
x DO NOT contaminate bodies of water when disposing of equipment wash water. 
x Advisory Dust-Reducing Technique: The use of seed flow lubricants or polymer 
coatings may help decrease the amount of dust released during planting. Follow the 
recommendations of the planter manufacturer regarding the use of seed flow 
lubricants.

A20903A 
Page 12 
Seed Treatment in Commercial Facilities or Seed Treatment on Farm (when 
treated seed are to be sold or distributed) – Seed Bag Labeling Requirements 
The Federal Seed Act requires that containers of treated seed shall be labeled with the 
following statements: 
 
x This seed has been treated with Fludioxonil and Sedaxane fungicides and 
Thiamethoxam insecticide. 
x Do not use for food, feed, or oil purposes. 
 
The U.S. Environmental Protection Agency requires that bags containing treated seed 
shall be labeled with the following statements. Any seed treated with A20903A that is 
sold or distributed without these statements or that is sold or distributed for a use not 
permitted by the following labeling does not qualify as an exempted treated article under 
40 CFR 152.25(a) and is therefore sale or distribution of an unregistered pesticide, 
pursuant to FIFRA section 12(a)(1)(A). 
 
This seed has been treated with A20903A (EPA Reg No. 100-1587) containing 
fludioxonil, sedaxane, and thiamethoxam. Any seed treated with A20903A that is sold or 
distributed for a use not permitted by the following labeling does not qualify as an 
exempted treated article under 40 CFR 152.25(a) and is therefore sale or distribution of 
an unregistered pesticide, pursuant to FIFRA section 12(a)(1)(A). 
 
x The contents of this bag are for planting purposes only. DO NOT use for food, feed, 
or oil purposes. DO NOT use for fuel or ethanol production purposes. 
x Groundwater Advisory: Fludioxonil and thiamethoxam have properties and 
characteristics associated with chemicals detected in groundwater. These chemicals 
may leach into groundwater if used in areas where soils are permeable, particularly 
where the water table is shallow. 
x Pollinator Precautions: Thiamethoxam is highly toxic to bees, and effects may be 
possible as a result of exposure to translocated residues in blooming crops. 
x Store treated seed away from food and feedstuffs. 
x Do not allow children, pets, or livestock to have access to treated seed. 
x Wear long-sleeved shirt, long pants and chemical-resistant gloves when handling 
treated seed. 
x Treated seed must be planted into the soil at a depth greater than 1 inch. 
x DO NOT plant treated seed by broadcasting to the soil surface. Ensure that all 
planted seeds are thoroughly incorporated by the planter during planting. Additional 
incorporation may be required to thoroughly cover exposed seeds. 
x Treated seed exposed on soil surface may be hazardous to wildlife. Cover or collect 
treated seed spilled during loading and planting (such as in row ends). 
x Manage excess treated seed (e.g., spilled, unused, or expired treated seed) by one 
or more of the following methods: 
o Collect excess treated seed for reuse for planting. 
o Bury excess treated seed (only allowed if totaling 1 pound or less) at least 30 
feet away from bodies of water at a depth of 6 inches or double the planting 
depth, whichever is greater.

A20903A 
Page 13 
o Dispose of excess treated seed by placing them in a landfill in accordance 
with applicable laws in your state. 
o Return excess treated seed to the supplier if permitted by the state. 
x Do not contaminate water bodies when disposing of planting equipment washwaters. 
x Dispose of seed packaging in accordance with local requirements. 
x Advisory Dust-Reducing Technique: The use of seed flow lubricants or polymer 
coatings may help decrease the amount of dust released during planting. Follow the 
recommendations of the planter manufacturer regarding the use of seed flow 
lubricants. 
x In the event of crop failure or harvest of a crop grown from seed treated with 
A20903A, crops may be replanted according to the following schedule: 
 
Plantback Interval Table 
Immediate Plantback Minimum 30-Day 
Plantback Interval 
Canola 
Cereal Grains: Barley, Corn (Field, 
Pop, Sweet), Oats, Rye, Sorghum, 
Triticale, and Wheat 
Cotton 
Dried Shelled Pea and Bean Crop 
Subgroup 6C 
Oilseeds: Borage, Crambe, Flax Seed, 
and Mustard Seed 
Potato 
Soybean 
Sugarbeet 
Alfalfa 
Brassica (Cole) Leafy Vegetables 
Crop Group 5 
Cereal Grains Crop Group 15 
Cucurbit Vegetables Crop Group 9 
Fruiting Vegetables Crop Group 8 
Dry Bulb Onion 
Leafy Vegetables Crop Group 4 
Legume Vegetables (Succulent or 
Dried) Crop Group 6 
Mint: Peppermint and Spearmint 
Peanut 
Root Vegetables Crop Subgroup 
1A 
Safflower 
Strawberry 
Sunflower 
Tobacco 
Tuberous and Corm Vegetables 
Crop Subgroup 1C 
 
x For any other crops the minimum plant back interval is 120 days from the date 
seeds treated with A20903A were planted. A cover crop other than the crops 
listed above that is planted for erosion control or soil improvement may be 
planted sooner than the 120-day interval; however, the crop may not be grazed 
or harvested for food or feed. 
x Forage must not be grazed until 30 days after planting. 
x Do not make any soil or foliar application of products containing thiamethoxam to 
crops grown from seed treated with A20903A. 
x Do not apply more than 0.266 lb ai/A of thiamethoxam per calendar year, 
including all thiamethoxam products and application methods (for example, seed 
treatment, in-furrow, and foliar). 
x For barley: DO NOT apply more than 0.052 lb ai/A (23.6 g ai/A) of thiamethoxam 
per season. 
x For oats, rye, and triticale: DO NOT apply more than 0.04 lb ai/A (18.4 g ai/A) of 
thiamethoxam per season.

A20903A 
Page 14 
x For wheat: DO NOT apply more than 0.08 lb ai/A (36.3 g ai/A) of thiamethoxam 
per season. 
x DO NOT apply more than 0.016 lb ai/A (7.1 g ai/A) per calendar year of 
sedaxane-containing products as a seed treatment on barley, oats, rye, triticale, 
and wheat. 
x This [barley][oat][rye][triticale][wheat] seed has been treated with X mg of 
thiamethoxam. 
x [All seed bag tags must be legible and set in at least 8-point font size.]

A20903A 
Page 15 
CROP USE DIRECTIONS 
 
When applied according to the A20903A Rate Table, A20903A provides early season 
protection against the insect pests and diseases listed in the table below. Early season 
foliar disease protection includes the first 4 weeks after planting. For full season 
protection, apply a foliar fungicide according to label directions. 
 
A20903A Rate Table 
Crop Protection Against the Following Insect 
Pests and Diseases 
Use Rate 
(fl oz/100 lb) 
Use Rate 
(g ai/100 kg) 
Cereals: 
Barley 
Oats 
Rye 
Triticale 
Wheat 
Aphids: Bird Cherry-oat, English Grain, and 
Russian Wheat 
 
European Chafer 
Grasshopper 
Greenbug 
Hessian Fly 
Wireworms 
 
Seed Decay, Damping-off, and Seedling 
Blight caused by Fusarium species and 
Rhizoctonia species 
 
Loose Smut (Ustilago nuda) on Barley 
 
Loose Smut (Ustilago tritici) on Wheat 
1.5 – 3.0 
Fludioxonil: 2.5 – 5 
Sedaxane: 2.5 – 5 
Thiamethoxam: 26 – 52 
 
Restrictions 
 
x Do not apply more than 0.266 lb ai/A of thiamethoxam per calendar year, 
including all thiamethoxam products and application methods (for example, seed 
treatment, in-furrow, and foliar).

A20903A 
Page 16 
STORAGE AND DISPOSAL 
 
Do not contaminate water, food or feed by storage or disposal. 
 
Pesticide Storage 
Store in the original container and only in a cool, dry, secure place. 
 
Pesticide Disposal 
Wastes resulting from the use of this product must be disposed of on site or at an 
approved waste disposal facility. If these wastes cannot be disposed of by use 
according to label instructions, contact your State Pesticide or Environmental Control 
Agency or the Hazardous Waste Representative at the nearest EPA regional office for 
guidance. 
 
Container Handling [less than or equal to 5 gallons] 
Non-refillable container. Do not reuse or refill this container. Triple rinse container (or 
equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining 
contents into application equipment or a mix tank and drain for 10 seconds after the flow 
begins to drip. Fill the container ¼ full with water and recap. Shake for 10 seconds. Pour 
rinsate into application equipment or a mix tank or store rinsate for later use or disposal. 
Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more 
times. Then offer for recycling if available or puncture and dispose of in a sanitary 
landfill, or by incineration, or by other procedures approved by state and local 
authorities. 
 
Container Handling [greater than 5 gallons] 
Non-refillable container. Do not reuse or refill this container. Triple rinse container (or 
equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining 
contents into application equipment or a mix tank. Fill the container ¼ full with water. 
Replace and tighten closures. Tip container on its side and roll it back and forth, 
ensuring at least one complete revolution, for 30 seconds. Stand the container on its 
end and tip it back and forth several times. Turn the container over onto its other end 
and tip it back and forth several times. Empty the rinsate into application equipment or a 
mix tank or store rinsate for later use or disposal. Repeat this procedure two more 
times. Then offer for recycling if available or puncture and dispose of in a sanitary 
landfill, or by incineration, or by other procedures approved by state and local 
authorities. 
 
Container Handling [greater than 5 gallons] 
Refillable container. Refill this container with pesticide only. Do not reuse this 
container for any other purpose. Cleaning the container before final disposal is the 
responsibility of the person disposing of the container. Cleaning before refilling is the 
responsibility of the person refilling. To clean container before final disposal, empty the 
remaining contents from this container into application equipment or mix tank. Fill the 
container about 10 percent full with water. Agitate vigorously or recirculate water with 
the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate 
collection system. Repeat this rinsing procedure two more times. Then offer for

A20903A 
Page 17 
recycling if available or puncture and dispose of in a sanitary landfill, or by incineration, 
or by other procedures approved by state and local authorities. 
 
For minor spills, leaks, etc., follow all precautions indicated on this label and clean up 
immediately. Take special care to avoid contamination of equipment and facilities during 
cleanup procedures and disposal of wastes. 
 
CONTAINER IS NOT SAFE FOR FOOD, FEED, OR DRINKING WATER. 
 
The ALLIANCE FRAME 
the SYNGENTA Logo and the PURPOSE ICON 
are Trademarks of a Syngenta Group Company 
 
Viton™ is a trademark of The Chemours Company FC, LLC 
 
© 20XX Syngenta 
 
For non-emergency (e.g., current product information), call 
Syngenta Crop Protection at 1-866-796-4368 
 
Manufactured for: 
Syngenta Crop Protection, LLC 
P.O. Box 18300 
Greensboro, North Carolina 27419-8300 
 
 
A20903A 1587 MAS 1119 AMEND-B 0226 – CL – jeb 05/18/2026 
000100-01587.20260216B.A20903A_AMEND_FEB2026-CL.PDF