# CAMIX SELECTIVE HERBICIDE

- EPA Reg No: **100-1148**
- Registrant: SYNGENTA CROP PROTECTION, LLC
- Signal word: Warning
- Active ingredients: S-Metolachlor (36.8%); Mesotrione (3.68%)
- Label accepted: 2011-04-04
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000100-01148-20110404.pdf

---
J 00- /JLf ~ r 
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY 
Washington, D.C. 20460 
Pat Dinnen 
Syngenta Crop Protection, LLC 
P.O. Box 18300 
Greensboro, NC 27419-8300 
OFFICE OF 
CHEMICAL SAFETY AND 
POLLUTION PREVENTION 
Subject: Notification per PR Notice 98-10 (remove expired patent numbers) 
Applications Dated February 28,2011 
Dear Ms. Dinnen: 
The Agency is in receipt of your Application for Pesticide Notification under 
Pesticide Registration Notice (PRN) 98-10 for the products listed below. The 
Registration Division (RD) has conducted a review of this request for its applicability 
under PRN 98-10 and finds that the action requested falls within the scope of PRN 98-
10. The labels submitted with the applications have been date-stamped "Notification" 
and will be placed in our records. 
EPA Reg. Number 
1100-1131 
000-1148) 
100-1152 
100-1201 
100-1359 
Product Name 
Callisto Herbicide 
Camix Selective Herbicide 
Lumax Selective Herbicide 
Lexar Herbicide 
Callisto Xtra 
If you have any questions regarding this letter, please contact Mindy Ondish at 
(703) 605-0723 or at ondish.mindy@epa.gov. 
Sincerely, 
1)~Vv~ 
Kathryn V. Montague 
Product Manager 23 
Herbicide Branch 
Registration Division (7504P)

r.~C:; '"C:;UU UI3t£UUWII3 1.11. rever~e ue.Jl.lre C;l.ImplEUlJ1! IUrrn. 2. 
.. ( d States 
~ Reg( "on 
OPP Identifier Number "3 
ABtA Environmental Protection Agency Ame~dment Notification 0 
Washington, DC 20460 x Other 
-~ 
Application for Pesticide - Section I 
1. Company/Product Number 2. EPA Product Manager 3. Proposed Classification 
100-1148 Kathryn Montague 
4. Company/Product (Name) PM# W None D Restricted 
Camix Selective Herbicide 23 
5. Name and Address of Applicant (Include ZIP Code) 6. Expedited Review. In accordance with FIFRA Section 3(c)(3) (b)(i), my 
_____ ByngentacropJ~rotection,-LLC -.----~ _product is. similar or identicalincomposition andJabelingto: -. --
P. O. Box 18300 NOT'Fnr>~-·-~ . 
Greensboro, NC 27419 EPA Reg. No. 
[:=J Check if this is a new address Product Name APR Uli '~1i 
Section -II 
o Amendment - Explain below. o Final printed labels in response to 
Agency letter dated 
0 Resubmission in response to Agency letter dated o "Me Too· Application. 
[]] Notification - Explain below. o Other - Explain below. 
Explanation: Use additional page(s) if necessary. (For Section I and Section 11.). 
Notification of label change per PR Notice 98-10. 
This Notification is consistent with the provisions of PR Notice 98-10 and EPA regulations at 40 CFR 152.46, and no other changes 
have been made to the labeling or the confidential statement of formula of this product. I understand that it is a violation of 18 U.S.C. 
Sec. 1001 to willfully make any false statement to EPA I further understand that if this notification is not consistent with the terms of 
PR Notice 98-10 and 40 CRF 152.46, this product may be in violation of FIFRA and I may be subject to enforcement action and 
penalties under sections 12 and 14 of FIFRA The following changes are being made via this notification: 
Remove expired patent numbers. , 
Section - III 
1. Material This Product Will Be Packaged In: 
Child-Resistant Packaging Unit Packaging Water Soluble Packaging 2. 
T~_~ EI Yes· EaYes Ea Yes Metal 
No . x No x No x Plastic 
Glass 
*Certification must If "Yes· No. per If "Yes" No. per Paper 
be submitted Unit Packaging wgt Container Unit Packaging wgt container Other (Specify) 
~~ 
c.",;.~ 
c c 
3. Location of Net Contents Information 4. Size(s) Retail Container 5. Location of Label Directions" •• !\'ill 
o Container 
2.5 gal., 220 gat, and bulk ~ On Label CO c ~ 
[2] Label On Labeling accompan<ying product 
c (; C lJ \.1-... 
0 
6. Manner in Which Label is AffIXed to Product 
§""-" W Other Pressure~Sen~iti\'e GCcc 
c c 
Paper glued LLLCCC Lee!.: 
Stenciled L L 
C r c c (Lce\...\. 
-. 
Section -IV c. ( C C t... 
c 
L C 0 
1- Contact Point (Complete items directly below for identification of indMdual to be contacted, if necessary, to process thIs ii'p{1cation.) .. c 
Name I Title I Telephone No. (Inclu~e-Ar'ea Code) 
Pat Dinnen Staff Label Group Leader 336-632-2494 _ , 
Certification 6. Data '.~'>fJlic'dtion 
I certify that the statements I have made on this form and all attachments thereto are true, accurate and complete. Re6eived 
I acknowledge that any knowingly false or misleading statement may be punishable by fine or imprisonment or (Stamped) 
both under applicable law. 
2. Signature 
",' ~. 
3. Title 
P!J.,C~ Staff Label Group Leader 
4. Typed Name 5. Date 
Pat Dinnen February 28, 2011

Certification with Respect to Label Integrity 
Version: 9/11/02 
I certify that the information (including, but not limited to, text, tables, and 
graphics) contained in the electronic file identified below by file name and 
'-s-u5riliftedwith-ttlis' certification-is lhe same Tnforrr'-citiori as· {naf onfhe paper 
copies of these documents included with this submission. 
PROPOSED LABEL 
EPA Registration # Date Submitted Electronic file name 
to EPA 
100-1148 2/28/11 000100-01148.20110228.CAMIX_NOTIF JEB2011.pdf 
I certify that the statements that I have made on this form are true, accurate, 
and complete. I acknowledge that any knowingly false or misleading 
statements may be punishable by fine or imprisonment or both under 
applicable law. 
February 28, 2011 
Signature Date 
Pat Dinnen 
Name (typed) 
Label Group Leader 
Title 
l t l ( l t 
( ( 
!. 
( ( ( <- L t 
( ( 
( L ( ( l 
l 
t t {I t 
C lee 
c 
c ( C C 
c C 
l l ( 
t ( l L 
( ( t ( 
l t l L 
, !. 
C I, l C l. L 
l 
, ( 
~ ( { '- ~ l 
( 
, '. 
( ( ( \.. L l 
(

Camix® 
Selective Herbicide 
~-~-~----.----.-----"------ --- -- ~ ----
( 
[2.5, 120, 220, 330 Gallon and Bulk Booklet] N01f1F~CA"nON 
APR 0 ~ 20n 
A Preemergence Herbicide for Control of Annual Grass and Broadleaf Weeds 
in Field Corn, Field Production Seed Corn, Field Silage Corn, Sweet Corn, and Yellow 
Popcorn 
Active Ingredients*: 
S-metolachlor: (CAS No. 87392-12-9) ................................................................. 36.80% 
Mesotrione: (CAS No.1 04206-82-8) .................................................................... 3.68% 
Other Ingredients: ............................................................................................... 59.52% 
Total: 100.00% 
*Active ingredients per gallon: S-metolachlor 3.34 pounds, mesotrione 0.33 pounds. 
KEEP OUT OF REACH OF CHILDREN. 
WARNING/AVISO 
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en 
detalle. (If you do not understand the label, find someone to explain it to you in detail.) 
See additional precautionary statements and directions for use inside booklet. 
EPA Reg. No.1 00-1148 
EPA Est. 1 00~LA-001 
2.5 gallons 
Net Contents 
120 gallons 220 gallons 
ccc<. 
330 gallons 
Net Contents 
Plant TBchnology® 
Net Contents Net Contents 
_ gallons [bulk] 
Net Contents 
SCP 1148A-L 1 F 0809 [2.5 gallon, Product 10 35102] 
SCP 1148A-L2F 0809 [Bulkl220 gallon, Product 10 22803/22804] 
<- Lee (. c 
eeL 
L L 
eLL L 
c c 
eeL 
c c c c. 
C ( L L 
tlllLl ((<.( 
L , 
( ~ r L 
'- Lt.-eLL 
(tCLL L 
'- L 
( L L ( ( 
L L 
LLlllL 
L

( 
-2-
FIRST AID 
If in eyes • Hold eye open and rinse slowly and gently with water for 15-
20 minutes. 
- ._---_. - -~-~--- __ ~ __ RemovecontacUenses, if present, afterJhe first5minutes, 
then continue rinsing eye. 
• Call a poison control center or doctor for treatment advice 
If on skin or • Take off contaminated clothing. 
clothing • Rinse skin immediately with plenty of water for 15-20 minutes. 
• Call a poison control center or doctor for treatment advice. 
If inhaled • Move person to fresh air. 
• If person is not breathing, call 911 or an ambulance, then give 
artificial respiration, preferably by mouth-to-mouth, if possible. 
• Call a poison control center or doctor for further treatment 
advice. 
If swallowed • Call a poison control center or doctor immediately for 
treatment advice. 
• Have person sip a glass of water if able to swallow. 
• Do not induce vomiting unless told to do so by the poison 
control center or doctor. 
• Do not give anything by mouth to an unconscious person. 
Have the product container or label with you when calling a poison control center 
or doctor or going for treatment. 
HOT LINE NUMBER 
For 24 Hour Medical Emergency Assistance (Human or Animal) 
or Chemical Emergency Assistance (Spill, Leak, Fire or Accident), 
Call 
1-800-888-8372 
PRECAUTIONARY STATEMENTS -------------------------------I<-c'-::-(_ c 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS c c 
c c C 
C( ((. 
WARNING ~LC~G~ 
l (. L ( ( l 
Causes substantial but temporary eye injury. Do not get in eyes or oQcr.LQthing. c <w....~o.r 
protective eye wear (goggles, face shield, or safety glasses). Wash fn~rough~y w,~th 
soap and water after handling and before eating, drinking, chewingL ~_gtir:n, Of' 'usih'g 
tobacco. Remove and wash contaminated clothing before reuse. Wear (iong-sleeved 
shirt and long pants, socks, shoes, and gloves. Prolonged or frequently repeat~dld~in 
contact may cause allergic reactions in some individuals. ( , 
l <. ( C l ( 
"

\. r ( 
-3-
Personal Protective Equipment (PPE) 
Applicators and other handlers must wear: 
__ ~ ___ ~~_____ _ ______ P [QJeGti'Le.J:=)y.~we~[ 
• Long-sleeved shirt and long pants 
• Chemical-resistant gloves - Category A (e.g. barrier laminate, butyl rubber, nitrile 
rubber, neoprene rubber, natural rubber, polyethylene, polyvinyl chloride (PVC) 
or viton) 
Shoes plus socks 
Discard clothing and other absorbent materials that have been drenched or heavily 
contaminated with this product's concentrate. Do not reuse them. Follow 
manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for 
washables, use detergent and hot water. Keep and wash PPE separately from other 
laundry. 
Engineering Control Statements 
When handlers use closed systems or enclosed cabs, in a manner that meets the 
requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides 
[40 CFR 170.240(d)(4-6)], the handler PPE requirements may be reduced or modified 
as specified in the WPS. 
Aerial application is prohibited. 
User Safety Recommendations 
Users should: 
• Wash hands before eating, drinking, chewing gum, using tobacco, or using the 
toilet. 
• Remove clothing immediately if pesticide gets inside. Then wash thoroughly and 
put on clean clothing. "<;I'e 
• Remove PPE immediately after handling this product. Wash the outside' \:J( 
gloves before removing. As soon as possible, wash thoroughly and change(,int.o~ 
clean clothing. "~,.,,, cc (to 
~ ( 
c <. (, C f. 
Environmental Hazards !. C ( (. ,: ( 
( <. 
tcce 
I" ( « 
« t (,-f 
Do not apply directly to water, to areas where surface water is present eM 'to inte'rtidal 
t. c.. t. \. t t., 
areas below the mean high water mark. Do not contaminate water when disposiog oJ 
equipment wash water or rinsate. : t, ('. <. 
Ground Water Advisory 
The active ingredient, S-metolachlor, has the potential to leach through soil into ground 
water under certain conditions as a result of agricultural use. Use of this product in 
G -
3~

r ( 
-4-
areas where soils are permeable, particularly where the water table is shallow, may 
result in ground water contamination. 
Surface Water Advisory 
----~--~--Ine actfvelng-redientsin thlsproducfhave The -potential to contamlnate- surface-water­
through ground spray drift. Under some conditions, the active ingredients may also 
have a high potential for runoff into surface water (primarily via dissolution in runoff 
water) for several months post-application. These include poorly drained or wet soils 
with readily visible slopes toward adjacent surface waters, frequently flooded areas, 
areas overlaying extremely shallow ground water, areas with in-field canals or ditches 
that drain to surface water, areas not separated from adjacent surface waters with 
vegetated filter strips, and areas overlaying tile drainage systems that drain to surface 
water. 
A level, well maintained vegetative buffer strip between areas to which this product is 
applied and surface water features such as ponds, streams, and springs will reduce the 
potential for contamination of water from runoff. Runoff of this product will be reduced 
by avoiding applications when rainfall is forecasted to occur within 48 hours. Sound 
erosion control practices will reduce this product's contribution to surface water 
contamination. 
Mixing/Loading Instructions 
Care must be taken when using this product to prevent back siphoning into wells, spills, 
or improper disposal of excess pesticide, spray mixtures, or rinsates. 
Check valves or antisiphoning devices must be used on mixing equipment. 
This product may not be mixed/loaded or used within 50 ft. of wells, including 
abandoned wells, drainage wells, and sink holes. Operations that involve mixing, 
loading, rinsing, or washing of this product into or from pesticide handling or application 
equipment or containers within 50 ft. of any well are prohibited, unless conducted on an 
impervious pad constructed to withstand the weight of the heaviest load that may be 
positioned on or moved across the pad. Such a pad shall be designed and maintained 
to contain any product spills or equipment leaks, container or equipment rinse or wash 
water, and rain water that may fall on the pad. Surface water shall not be allowed to 
either flow over or from the pad, which means the pad must be self-contained. The pad 
shall be sloped to facilitate material removal. An unroofed pad shall be of sufficient 
capacity to contain at a minimum 110% of the capacity of the largest pesticide container 
or application equipment on the pad. A pad that is covered by a roof of sufficient size to 
completely exclude precipitation from contact with the pad shall have a minimum 
containment capacity of 100% of the capacity of the largest pesticide container or 
application equipment on the pad. Containment capacities as described above shall be 
maintained at all times. The above-specified minimum containment capacities do not 
apply to vehicles when delivering pesticide shipments to the mixing/loading site.

( 
-5-
Physical and Chemical Hazards 
Do not use or store near heat or open flame.

-6-
CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY 
NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation of 
__ ~ _________ Wa[[anty- andUability_before __ buying --oLusingthis __ producL ILthe- terms are- not 
acceptable, return the product at once, unopened, and the purchase price will be 
refunded. 
The Directions for Use of this product must be followed carefully. It is impossible to 
eliminate all risks inherently associated with the use of this product. Crop injury, 
ineffectiveness or other unintended consequences may result because of such factors 
as manner of use or application, weather or crop conditions, presence of other materials 
or other influencing factors in the use of the product, which are beyond the control of 
SYNGENTA CROP PROTECTION, LLC or Seller. To the extent permitted by 
applicable law, Buyer and User agree to hold SYNGENTA and Seller harmless for any 
claims relating to such factors. 
SYNGENTA warrants that this product conforms to the chemical description on the label 
and is reasonably fit for the purposes stated in the Directions for Use, subject to the 
inherent risks referred to above, when used in accordance with directions under normal 
use conditions. To the extent permitted by applicable law: (1) this warranty does not 
extend to the use of the product contrary to label instructions or under conditions not 
reasonably foreseeable to or beyond the control of Seller or SYNGENTA, and (2) Buyer 
and User assume the risk of any such use. To the extent permitted by applicable law, 
SYNGENTA MAKES NO WARRANTIES OF MERCHANTABILITY OR OF FITNESS 
FOR A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR IMPLIED 
WARRANTY EXCEPT AS WARRANTED BY THIS LABEL. 
To the extent permitted by applicable law, in no event shall SYNGENTA be liable for 
any incidental, consequential or special damages resulting from the use or handling of 
this product. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THE 
EXCLUSIVE REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY 
OF SYNGENTA AND SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES 
OR DAMAGES (INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, 
CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) 
RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SHALL BE THE 
RETURN OF THE PURCHASE PRICE OF THE PRODUCT OR, AT THE ELECTION 
OF SYNGENTA OR SELLER, THE REPLACEMENT OF THE PRODUCT. 
SYNGENTA and Seller offer this product, and Buyer and User accept it, subject to the 
foregoing Conditions of Sale and Limitation of Warranty and Liability, which may not be 
modified except by written agreement signed by a duly authorized representative of 
SYNGENTA.

r 
-7-
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a manner inconsistent with its 
labeling. 
-- ------------- --- .. - ------- --- ---------- -- --- - ---
Camix should be used only in accordance with recommendations on this label or in 
separately published Syngenta supplemental labeling recommendations for this 
product. 
Do not apply this product in a way that will contact workers or other persons, either 
directly or through drift. Only protected handlers may be in the area during application. 
For any requirements specific to your State or Tribe, consult the agency responsible for 
pesticide reg u lation. 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection 
Standard, 40 CFR part 170. This Standard contains requirements for the protection of 
agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of 
agricultural pesticides. It contains requirements for training, decontamination, 
notification, and emergency assistance. It also contains specific instructions and 
exceptions pertaining to the statements on this label about personal protective 
equipment (PPE), and restricted-entry interval. The requirements in this box only apply 
to uses of this product that are covered by the Worker Protection Standard. 
Do not enter or allow worker entry into treated areas during the restricted-entry 
interval (REI) of 24 hours. Exception: If the product is soil-injected or soil­
incorporated, the Worker Protection Standard, under certain circumstances, allows 
workers to enter the treated area if there will be no contact with anything that has been 
treated. 
For early entry to treated areas that is permitted under the Worker Protection Standard 
and that involves contact with anything that has been treated, such as plants, soil and 
water, wear: 
• Protective eyewear 
• Coveralls over long-sleeved shirt and long pants 
Socks and chemical resistant footwear, and 
• Chemical-resistant gloves - Category A (e.g. barrier laminate, butyl rubber, nitrile 
rubber, neoprene rubber, natural rubber, polyethylene, polyvinyl chloride (PVC) 
or viton)

c 
-8-
FAILURE TO FOLLOW THE DIRECTIONS FOR USE AND PRECAUTIONS ON THIS 
LABEL MAY RESULT IN POOR WEED CONTROL, CROP INJURY, OR ILLEGAL 
RESIDUES. 
Note: Not for sale, use, or distribution in Nassau County or Suffolk County, New 
York. 
GENERAL INFORMATION 
Camix may be used in the culture of field corn, field corn seed corn, and field corn 
silage. Camix may also be used in the culture of yellow popcorn and sweet corn, but 
the application must be made prior to crop emergence or severe crop injury may occur. 
Camix is a selective herbicide recommended for preemergence use for control of most 
annual grasses and broadleaf weeds in field corn, sweet corn, and yellow popcorn. 
Camix may also be applied early postemergence for the control of broad leaf weeds in 
field corn (preemergence only in sweet corn and yellow popcorn). See Tables 1 and 2 
for a list of weeds controlled. This product must be used prior to weed emergence to 
control most grass weeds. 
Camix is a unique combination of the herbicides S-metolachlor and mesotrione plus the 
safener benoxacor. Camix controls weeds by interfering with normal germination and 
seedling development. 
USE PRECAUTIONS 
Read all label directions before using. 
1. Do not apply this product through any type of irrigation system. 
2. Do not use flood irrigation to apply or incorporate this product. 
3. Product must be used in a manner which will prevent back siphoning in wells, spills 
or improper disposal of excess pesticide, spray mixtures or rinsates. 
4. Do not apply under conditions which favor runoff or wind erosion of soil containing 
this product to non-target areas. To prevent off-site movement due to runoff or wind 
erosion: 
• Avoid treating powdery dry or light sandy soils when conditions are favorable for 
wind erosion. Under these conditions, the soil surface should first be settled by 
rainfall or irrigation. 
• Do not apply to impervious substrates such as paved or highly compacted 
surfaces or frozen or snow covered soils.

c 
-9-
5. Do not apply more than 2.4 qts. of Camix per growing season. 
6. Do not apply other solo HPPD inhibitor postemergence herbicides (Callisto®, 
___ ._._ .. _. ____ ~1r:r1J2.c~l(~t@L J~L L~lJdi.§@) tQ. 9[9J,ID<t.t.t:Lal.b.gs .be~n tr~at~q with CgJTJix..in .th~ same 
season. 
7. Do not apply Camix postemergence (emerged corn) to corn that has received an at­
plant application of Counter® insecticide, as severe corn injury may occur. 
Temporary corn injury may occur if Camix is applied to emerged corn where 
organophosphate insecticides other than Counter were applied at planting. 
8. Do not make postemergence (emerged corn) applications of Camix in a tank mix 
with any organophosphate or carbamate insecticide, or severe corn injury may 
occur. 
9. Do not make a postemergence (emerged corn) application of any organophosphate 
or carbamate insecticide within 7 days before or 7 days after a Camix application, or 
severe corn injury may occur. 
10. Do not use Camix on any crop other than field corn (for grain, seed, or silage), 
sweet corn (preemergence applications only), or yellow popcorn (preemergence 
applications only). 
11. Do not use Camix in the culture of white popcorn or ornamental (Indian) corn. 
12. Do not contaminate irrigation water used for crops other than corn or water used for 
domestic purposes. 
13. Avoid drift onto adjacent crops. 
14. Do not allow Camix to contaminate feed or food. 
15. Camix must not be stored near seeds, fertilizers, or foodstuffs. 
16.AII containers of Camix must be kept tightly closed when not in use. 
17. Do not use aerial application to apply Camix. 
18. Do not apply Camix to yellow popcorn or sweet corn after the crop has emerged, or 
crop injury may occur. 
Applied according to directions and under normal growing conditions, Camix will not 
harm the treated crop. During germination and early stages of growth, extended 
periods of unusually cold and wet or hot and dry weather, insect or plant disease attack, 
carryover pesticide residues, the use of certain soil applied systemic insecticides, 
I 2 ---
~~

-10-
improperly placed fertilizers or soil insecticides, may weaken crop seedlings. Camix 
used under these conditions could result in crop injury. 
RESISTANCE MANAGEMENT 
Naturally occurring biotypes of certain broadleaf weed species with resistance to 
triazines or ALS herbicides are known to exist. However, no known resistance to this 
product exists and there are no known instances of cross resistance between this 
herbicide and other classes of herbicides. If biotypes of weeds resistant to triazines or 
ALS inhibitors are present in the field, this herbicide should control them if they are 
listed in Tables 1 and 2. 
To reduce the risk of weeds developing resistance to HPPD inhibitors, do not apply solo 
postemergence HPPD inhibitor herbicides (Callisto, Impact, Laudis) in the same season 
or on the same field where Camix Herbicide has been applied. A good weed resistance 
management strategy includes a herbicide program that contains two or more modes of 
action. Camix Herbicide contains two herbicide active ingredients and two modes of 
action and can be an effective component of a weed resistance management strategy. 
INTEGRATED PEST (WEED) MANAGEMENT 
Camix may be integrated into an overall weed and pest management strategy. 
Practices known to reduce weed development (tillage, crop competition) and herbicide 
use (weed scouting, proper application timing, banding and rotations) should be 
followed wherever possible. Consult local agricultural and weed authorities for 
additional Integrated Pest Management strategies established for your area. 
SOIL ORGANIC MATTER 
The organic matter of the soil on which the application is to be made must be known or 
determined prior to application. The use rate of Camix is based on percent organic 
matter. 
USE RATES IN ALL TILLAGE SYSTEMS (CONVENTIONAL, REDUCED, AND NO­
TILL) 
The soil organic matter content of the field on which Camix is to be applied must be 
known. If soil organic matter content is less than 3% use 2.0 qts. of Camix per acre. If 
soil organic matter content is 3% or greater use 2.4 qts. of Camix per acre. Do not 
apply more than 14 days prior to planting or to field corn higher than 30 inches tall. 
(See APPLICATION PROCEDURES section for more information on application 
timings and methods.) Camix is not recommended on soils with greater than 10% 
organic matter, or poor weed control may result. 
REDUCED AND NO-TILL SYSTEMS 
Camix may be used in reduced and no-till systems. The highest levels of control will be

( 
-11-
obtained when applications are made as close to planting as possible. It is 
recommended that a burndown herbicide such as Gramoxone Inteon®, Touchdown® 
brands, or Roundup brands be tank mixed with Camix in reduced or no-till systems if 
weeds are present at application. 
WEEDS CONTROLLED 
Thoroughly till soil or make an application of a burndown herbicide to destroy 
germinating and emerged weeds. Plant crop into moist soil immediately after tillage. 
Camix applied as directed in this label will control or suppress the weeds listed in 
Tables 1 and 2. Additional weeds may be controlled with tank mixes. See the Camix 
Tank Mix Combinations section for recommended tank mix combinations. Always 
consult the tank mix product labels for specific rates and use directions. 
If a significant rainfall does not occur within 7 days after application, weed control may 
be decreased. If irrigation is available, apply Yz to 1 inch of water. If irrigation is not 
available, a uniform shallow cultivation is recommended as soon as weeds emerge.

( ( 
-12-
Table 1: Weeds Controlled or Partially Controlled by Preemergence Applications 
ofCamix 
. _-----
-~ 
- --
~ _. -~--
--- -- .~-. - - ... _-- . ---- - - -- - _ . 
G =-Control 
Common Name Weed Scientific Name PC = Partial 
Type 1 Control 
Amaranth, Palmer B Amaranthus palmeri C 
Amaranth, Powell B Amaranthus powellii C 
Ba rnyardg rass G Echinochloa crus-galli C 
Buffalobur B Solanum rostra tum C 
Carpetweed B Mol/ugo verticil/ata C 
Cocklebur, common B Xanthium strumarium PC 
Crabgrass G Digitaria spp. C 
C rowfootg rass G Dactyloctenium aegyptium C 
Cupgrass, prairie G Eriochloa contracta C 
Cupgrass, Southwestern G Eriochloa gracilis C 
Cupgrass, woolly G Eriochloa vil/osa PC 
Foxtail, giant G Setaria faberi C 
Foxtail, green G Setaria viridis C 
Foxtail, robust (purple, G Setaria spp. C 
white) 
Foxtail, yellow G Setaria pumila C 
Galinsoga B Galinsoga parvif/ora C 
Goosegrass G Eleusine indica C 
Jimsonweed B Datura stramonium C 
Johnsongrass, seedling G Sorghum halepense PC 
Kochia B Kochia scoparia PC

c 
-13-
C = Control 
Common Name Weed Scientific Name PC = Partial 
Type 1 Control 
-I=ambsquarters~--common --- -- -~ 
---B-- --Chenopodium-album - - --- -- -- -- - e- - - -~-
Millet, foxtail G Setaria italica C 
Millet, wild pros~ G Panicum miliaceum PC 
Morningglory, B Ipomoea hederacea. PC 
ivyleaf/entireleaf 
Nightshade, black B Solanum nigrum C 
Nightshade, eastern black B Solanum ptycanthum C 
Nightshade, hairy B Solanum sarachoides C 
Nutsedge, yellow S Cyperus esculentus C 
Panicum, browntop G Panicum fasciculatum C 
Ppnicum, fall G Panicum dichotomiflorum C 
Panicum, Texas G Panicum texanum PC 
Pigweed, redroot B Amaranthus retroflexus C 
Pigweed, smooth B Amaranthus hybridus C 
Purslane, common B Portulaca oleracea C 
Pusley, Florida B Richardia scabra C 
Ragweed, common B Ambrosia artemisiifolia PC 
Ragweed, giant B Ambrosia trifida PC 
Rice, red G Oryza sativa C 
Sandbur, field G Cenchrus incertus PC 
Shattercane G Sorghum bicolor PC 
Sida, prickly B Sida spinosa PC 
Signalgrass, broadleaf G Brachiaria platyphylla PC

( ( 
(7 
---
l~ -14-
C = Control 
Common Name Weed Scientific Name PC = Partial 
Type1 Control 
-$martweed,ladysthumb - -- ·8 - PelYfJenumpersioaria- .--- - - .- -8-- --
Smartweed, Pennsylvania B Polygonum pensylvanicum C 
Sprangletop, red G Leptochloa filiformis C 
Velvetleaf B Abutilon theophrasti C 
Waterhemp, common B Amaranthus tuberculatus C 
Waterhemp, tall B Amaranthus rudis C 
Witchgrass G Panicum capillare C 
1 _ 
- -B-Broadleaf, G-Grass, S-Sedge

-15-
Table 2: Weeds Controlled or Partially Controlled by Early Postemergence 
Applications of Camix 1,2 
Common Name Weed Scientific Name C = Control 
_. -- ._- -_. .- - - - ._- - -- -- . __ Type 3 _ - ---- .-- - -- .- . p.C--=-I~ar1ial-
Control 
Amaranth, Palmer B Amaranthus palmeri C 
Amaranth, Powell B Amaranthus powellii C 
Buffalobur B Solanum rostratum C 
Carpetweed B Mollugo verticil/ata C 
Cocklebur, common B Xanthium strumarium C 
Dandelion B Taraxacum officinale PC 
Galinsoga B Galinsoga parviflora C 
Hemp B Cannabis sativa C 
Horsenettle B Solanum carolinense C 
Horseweed (marestail) B Conyza canadensis C 
Jimsonweed B Datura stramonium C 
Kochia B Kochia scoparia PC 
Lambsquarters, common B Chenopodium album C 
Morningglory, B Ipomoea hederacea. PC 
ivyleaf/entireleaf 
Mustard, Wild B Brassica kaber C 
Nightshade, black B Solanum nugrum C 
Nightshade, eastern black B Solanum ptycanthum C 
Nightshade, hairy B Solanum sarachoides C 
Nutsedge, yellow S Cyperus esculentus PC 
Pigweed, redroot B Amaranthus retroflexus C 
Pigweed, smooth B Amaranthus hybridus C

-16-
Common Name Weed Scientific Name C = Control 
Type 3 PC = Partial 
Control 
_P_Q~Rwe_ed _ - - -- --- 8._ 
~ - Phytolacca- americana --- --- -- --- .c 
Potatoes, volunteer B Solanum Spp C 
Purslane, common B Portulaca oleracea PC 
Pusley, Florida B Richardia scabra C 
Ragweed, common B Ambrosia artemisiifolia C 
Ragweed, giant B Ambrosia trifida C 
Sida, prickly B Sida spinosa PC 
Smartweed,ladysthumb B Polygonum persicaria C 
Smartweed, Pennsylvania B Polygonum pensylvanicum C 
Thistle, Canada B Cirsium arvense PC 
Velvetleaf B Abutilon theophrasti C 
Waterhemp, common B Amaranthus tuberculatus C 
Waterhemp, tall B Amaranthus rudis C 
1Camix will not provide consistent control of emerged grass weeds. A tank mix of 
AAtrex® with Camix can provide control of certain emerged annual grass weeds. Refer 
to the AAtrex label for weeds controlled and other restrictions. 
200 not apply Camix to sweet corn or yellow popcorn after the crop has emerged, or 
crop injury may occur. 
3B=Broadleaf, G=Grass, S=Sedge 
ROTATIONAL CROPS 
When rotating crops following an application of Camix: 
• Field corn, field seed corn, sweet corn, yellow popcorn and grain sorghum 
(Concep® treated seed) may be replanted immediately, if crop is lost. Do not 
reapply Camix. 
--

( 
-17-
• Do not rotate to crops other than corn (all types), cotton, peanuts, potatoes, 
soybeans, sorghum, wheat, barley, oats, or rye the spring following application of 
Camix. 
~~~~~ .--·.If--Camix- is applied -after-June 1-, rotating -to-crops--other-than-corn--(all--types)--or­
sorghum the next spring may result in crop injury. 
• Winter wheat, barley, or rye may be planted 4% months after application. 
• For all other crops, wait 18 months. 
APPLICATION PROCEDURES 
ADJUVANTS 
Where Camix is applied after the field corn has emerged, a non-ionic surfactant at 
0.25% v/v (1 qU100 gals.) may be used. The use of crop oil concentrate (COC) may 
result in temporary crop injury. If used, add COC at a rate not to exceed 1 % v/v (1 
gal.l100 gals.) or not more than the equivalent of 1 qUA. Do not use nitrogen based 
adjuvants (AMS or UAN) or methylated seed oil (MSO) with Camix when applied alone 
to emerged field corn, or when Camix is applied as a postemergence tank mixture with 
other products, unless directed for a specific tank mix on this label or as part of a 
supplemental Camix label. Any of these adjuvants may be used at a preemergence or 
preplant timing, i.e. where the corn crop has not yet emerged, to increase burndown 
activity on existing weeds. Do not apply Camix to emerged yellow popcorn or sweet 
corn, or severe crop injury may occur. 
For Camix tank mixtures with Liberty® Herbicide applied to emerged field corn 
(LibertyLink® hybrids only), AMS may be added as directed on the Liberty label. 
However, AMS should be the only adjuvant added to this tank mixture, or severe crop 
injury may occur. 
Early Preplant: Camix may be applied up to 14 days prior to planting. 
Preemergence Surface: Do not exceed 2.4 qts. of Camix per season. Camix may be 
applied to the soil surface as a broadcast or banded application. 
Banding Preemergence: Camix may be applied in a 10-15 inch band after corn 
planting but prior to corn emergence.

l. 
-18-
Band Applications: For band applications, using row and band width measurements 
in inches, calculate the amount to be applied per acre as follows: 
__ Band width in. _J< _ Bqt~R~La~re. {Qr~.brQa~tc~tsC 
inches treatment 
Row width in 
inches 
Postemergence: Camix may be applied after field corn emergence until the corn 
plants reach 30 inches in height or up to the 8-leaf stage of corn growth. Applications to 
field corn greater than 12 inches tall should be post-directed applications, or crop injury 
may occur. Do not apply postemergence to field corn in liquid fertilizer or severe crop 
injury may occur. See the "Adjuvants" section above for adjuvant recommendations. Do 
not apply Camix to emerged yellow popcorn or sweet corn, or severe crop injury may 
occur. 
Camix applied early postemergence will control small emerged broad leaf weeds (less 
than 3 inches) listed in Table 2. For control of emerged annual grass weeds a grass 
herbicide tank mix may be required (see tank mix section of this label). Camix will not 
provide control of emerged grass weeds. Tank mixes of AAtrex can provide additional 
control of emerged annual grass and broad leaf weeds. If atrazine is used, applications 
cannot be made to field corn that is greater than 12 inches tall. Refer to the AAtrex 
label for weeds controlled and additional use restrictions. 
If Dual II Magnum® or Dual Magnum®, alone or in tank mixtures, have been applied 
early preplant, preplant surface, preplant incorporated, or preemergence, limit the 
Camix early post application to not exceed a total of 3.75 Ibs. of S-metolachlor active 
per acre or illegal residues may result. 
Grazing Restriction: To avoid possible illegal residues, do not graze or feed forage 
from treated areas for 45 days following application. 
Preharvest Interval (PHI): Field corn may be treated up to 30 inches tall or up to the 8-
leaf stage of corn growth. Do not harvest forage, grain, or stover within 45 days after 
application. 
Sprinkler Irrigation: Do not apply Camix by sprinkler irrigation. Use a sprinkler 
system only to incorporate Camix after application. After Camix has been applied, a 
sprinkler irrigation system set to deliver %-1 inch of water may be used to incorporate 
the product. Using more than 1 inch of water could result in reduced performance. On 
sandy soil low in organic matter, use no more than % inch of water. Do not use flood 
irrigation to apply or incorporate Camix.

( 
-19-
CULTIVATION 
Should weeds develop, a shallow cultivation or rotary hoeing will generally result in 
____ ~ jroprm/ed_weed_control. ILCamix-was incorporated ,-cultivate-Iess-than half-the depth-of-­
incorporation. 
If cultivation is necessary due to soil crusting, compaction or escaped weeds, adjust 
equipment to run shallow and minimize soil movement. This will decrease the 
possibility of diluting or moving the herbicide from the weed control zone. 
SPRAY EQUIPMENT 
Ground Application 
Spray nozzles should be uniformly spaced, the same size and type, and should provide 
accurate and uniform application. Use spray nozzles that provide medium to coarse 
droplet size to avoid drift yet provide good coverage. Ensure that all in-line strainer and 
nozzle screens in the sprayer are 50-mesh or coarser. Use a pump that can maintain a 
pressure of at least 35-40 psi at the nozzles and provide proper agitation within the tank 
to keep the product dispersed. Lower pressures may be used with extended range or 
drift reduction nozzles as long as adequate coverage is maintained. Always ensure that 
agitation is maintained until spraying is completed, even if stopped for brief periods of 
time. If the agitation is stopped for more than 5 minutes, re-suspend the spray solution 
by running on full agitation prior to spraying. 
Preemergence: Apply in a spray volume of 10-80 gals.lA. 
Postemergence: Good weed coverage is essential for optimum weed control. Boom 
height for broadcast over-the-top applications should be based on the height of the crop 
- at least 15 inches above the crop canopy, but only high enough to give uniform 
coverage. Apply in a spray volume of 10-30 gals.lA. When weed foliage is dense, use 
a minimum spray volume of 20 gals/A. Flat fan nozzles of 80° or 110° are 
recommended for optimum postemergence coverage. Do not use floodjet nozzles or 
controlled droplet application equipment for postemergence applications. Nozzles may 
be angled forward 45° to enhance penetration of the crop and provide better coverage. 
Spray Drift 
AVOIDING SPRAY DRIFT AT THE APPLICATION SITE IS THE RESPONSIBILITY OF 
THE APPLICATOR. The interaction of equipment and weather related factors 
determine the potential for drift. The applicator is responsible for considering these 
factors when making an application decision.

-20-
Do not apply when weather conditions may cause drift to non-target areas. Drift may 
result in injury to adjacent crops and vegetation. To avoid spray drift, DO NOT apply 
when, the wind speed is greater than 10 mph or during periods of temperature 
inversions. 
Information on Droplet Size 
The most effective way to reduce spray drift potential is to apply large droplets. The 
best drift management strategy is to apply the largest droplets that provide sufficient 
coverage and control. Applying larger droplets reduces drift potential, but will not 
prevent drift if applications are made improperly, or under unfavorable environmental 
conditions. 
Controlling Droplet Size 
• 
• 
• 
Volume 
Use high flow rate nozzles to apply the highest practical spray volume. Nozzles 
with higher rated flows produce larger droplets. 
Pressure 
Do not exceed the nozzle manufacturer's recommended pressures. For many 
nozzle types, lower pressure produces larger droplets. When higher flow rates are 
needed, use higher flow rate nozzles instead of increasing pressure. 
Number of Nozzles 
Use the minimum number of nozzles that provide uniform coverage. 
Nozzle Type 
Use a nozzle type that is designed for the intended application. With most nozzle 
types, narrower spray angles produce larger droplets. Consider using low-drift 
nozzles. 
Application Height 
Applications should be made at the lowest height above the target area that still 
provides uniform coverage of the target. Making applications at the lowest yet effective 
height reduces exposure of droplets to wind. 
Wind 
Drift potential is lowest between wind speeds of 10 mph or less. However, many 
factors, including droplet size, pressure, and equipment type determine drift potential at 
any given wind speed. Note: Local terrain can influence wind patterns. 
Leave a sufficient buffer downwind of the application to avoid drift to sensitive crops. 
This buffer may be untreated corn rows or field border species maintained for this

( ( 
-21-
purpose. The width of the buffer needed for a specific application will depend on the 
wind speed, distance to sensitive crops, and application equipment parameters. 
Temperature Inversions 
Applications should not occur during a temperature inversion because drift potential is 
high. Temperature inversions restrict vertical air mixing, which causes small suspended 
droplets to remain in a concentrated cloud. This cloud can move in unpredictable 
directions due to the light variable winds common during inversions. Temperature 
inversions are characterized by increasing temperatures with altitude and are common 
on nights with limited cloud cover and light to no wind. They begin to form as the sun 
sets and often continue into the morning. Their presence can be indicated by ground 
fog; however, if fog is not present, inversions can also be identified by the movement of 
smoke from a ground source or an aircraft smoke generator. Smoke that layers and 
moves laterally in a concentrated cloud (under low wind conditions) indicates an 
inversion, while smoke that moves upward and rapidly dissipates, indicates good 
vertical air mixing. 
Sensitive Areas 
Camix herbicde should only be applied when the potential for drift to adjacent sensitive 
areas (e.g., residential areas, bodies of water, known habitat for threatened or 
endangered species, nontarget crops) is minimal (e.g., when wind is blowing away from 
the sensitive areas). 
Cleaning Equipment After Application 
Special attention must be given to cleaning equipment before spraying a crop other than 
field corn. Mix only as much spray solution as needed. 
1. Flush tank, hoses, boom, and nozzles with clean water. 
2. Prepare a cleaning solution of 1 gal. of household ammonia per 25 gals. of water. 
Many commercial spray tank cleaners may be used. 
3. Use a pressure washer to clean the inside of the spray tank with this solution. Take 
care to wash all parts of the tank, including the inside top surface. If a pressure 
washer is not available, completely fill the sprayer with the cleaning solution to 
ensure contact of the cleaning solution with all internal surfaces of the tank and 
plumbing. Start agitation in the sprayer and thoroughly recirculate the cleaning 
solution for at least 15 minutes. All visible deposits must be removed from the 
spraying system. 
4. Flush hoses, spray lines, and nozzles for at least 1 minute with the cleaning solution. 
5. Dispose of rinsate from steps 1-3 in an appropriate manner. 
6. Repeat steps 2-5.

( 
-22-
7. Remove nozzles, screens, and strainers and clean separately in the ammonia 
solution after completing the above procedures. 
8. Rinse the complete spraying system with clean water. 
MIXING PROCEDURES 
CARRIER 
Liquids: Either water or liquid fertilizers excluding suspension fertilizers may be used 
as carriers for preemergence applications. If fluid fertilizers are used, a compatibility 
test must be done. See Compatibility Test section for compatibility testing. Even if 
Camix is physically compatible with a fluid fertilizer, constant agitation is necessary to 
maintain a uniform mixture during application. Use only clean water as the carrier when 
applying Camix after field corn emergence. 
ADDING CAMIX TO THE SPRAY TANK 
The spray tank must be clean, thoroughly rinsed and decontaminated before adding 
either Camix alone or with tank mix partners. If water is used as the carrier, use clean 
water. 
Used Alone: When Camix is used alone, add the recommended amount of Camix to 
the spray tank when the tank is half full of the carrier, then add the rest of the water or 
fluid fertilizer. Provide sufficient agitation during mixing and application to maintain a 
uniform mixture. 
Tank Mixed: Refer to the sections on this label for recommended tank mixes. Always 
refer to labels of the tank mix partners for mixing directions and precautions. Do not 
exceed label dosage rates, nor combined maximum seasonal doses for mesotrione or 
S-metolachlor. This product cannot be mixed with any product bearing a label 
prohibition against such mixing. If a tank mixture is used, a compatibility test must be 
done. See Compatibility Test section for details on the procedure for such a test. 
If the tank mix partner is compatible, fill the tank half full of the carrier. Start and 
continue agitation throughout mixing and application. All return lines to the spray tank 
must discharge below the liquid level. Prepare the components and add in the following 
order: 
1. If a wettable powder or dry flowable formulation is used, make a slurry with water 
and add it slowly through the screen into the tank. Agitate during the procedure. 
2. If a f10wable formulation is used, add slowly through screen into the tank. Mixing 
and compatibility may be improved when a dry flowable is diluted with water before 
adding to the tank. 
3. Add Camix.

( 
-23-
4. Add any other liquid tank mix products next with emulsifiable concentrates last. 
5. Add an adjuvant last, if needed. 
6. Complete filling the sprayer tank and continue agitation. 
7. Apply as soon as possible after spray mixture is prepared. Do not leave mixture in 
____ spray.tank overnightwithoutagitationor.unattended ... 
COMPATIBILITY TEST 
A compatibility test is recommended before tank mixing to ensure compatibility of Camix 
with other pesticides. The following test assumes a spray volume of 25 gals'/A. For 
other spray volumes, make appropriate changes in the ingredients. 
Note: Nitrogen solutions or complete liquid fertilizers, excluding suspension fertilizers, 
may replace all or part of the water in the spray. Because liquid fertilizers vary, even 
within the same analysis, always check compatibility with pesticide(s) before use. 
Incompatibility of tank mixtures is more common with mixtures of fertilizer and 
pesticides. 
Test Procedure 
1. Add 1.0 pt. of carrier (fertilizer or water) to each of two 1 qt. jars with tight lids. 
Note: Use the same source of water that will be used for the tank mix and 
conduct the test at the temperature the tank mix will be applied. 
2. To one of the jars, add 1/4 tsp. or 1.2 milliliters of a compatibility agent approved 
for this use, such as Compex® or Unite® (1/4 tsp. is equivalent to 2.0 pts.l100 
gals. spray). Shake or stir gently to mix. 
3. To both jars, add the appropriate amount of pesticide(s) in their relative 
proportions based on recommended label rates. If more than one pesticide is 
used, add them separately with dry pesticides first, flowables next, and 
emulsifiable concentrates last. After each addition, shake or stir gently to 
thoroughly mix. 
4. After adding all ingredients, put lids on and tighten, and invert each jar ten times 
to mix. Let the mixtures stand 15-30 minutes and then look for separation, large 
flakes, precipitates, gels, heavy oily film on the jar, or other signs of 
incompatibility. Determine if the compatibility agent is needed in the spray 
mixture by comparing the two jars. If either mixture separates, but can be 
remixed readily, the mixture can be sprayed as long as good agitation is used. If 
the mixtures are incompatible, test the following methods of improving 
compatibility: (a) slurry the dry pesticide(s) in water before addition, or (b) add 
1/2 the compatibility agent to the fertilizer or water and the other 1/2 to the 
emulsifiable concentrate or flowable pesticide before addition to the mixture. If 
incompatibility is still observed, do not use the mixture.

( ( 
-24-
5. After compatibility testing is complete, dispose of any pesticide wastes in 
accordance with the Storage and Disposal section in this label. 
______ CROP_USE DIRECIIONS - CORN 
CAMIX TANK MIX COMBINATIONS 
Use of Spray Adjuvants With Tank Mixtures 
When Camix is used as a preemergence herbicide and before weeds have emerged, 
spray adjuvants have little or no influence on performance. However, in burndown 
situations where the weeds have emerged and the corn has not, an adjuvant may be 
used with Camix applied alone or when applied in tank mixture with a burndown 
herbicide as allowed on the individual product labels. Use only those adjuvants 
approved for agricultural crop use. See the "Adjuvants" section under "Application 
Procedures" for further instructions. 
Burndown Combination for Reduced Tillage Situations 
In reduced or no-till corn and before the crop has emerged, Camix tank mixtures with 
Gramoxone Inteon, Touchdown brands, or Roundup brands will burndown existing 
weeds. Gramoxone Inteon should be applied to emerged weeds when they are small 
with best results achieved when weeds are 1-6 inches in height. Consult the 
Gramoxone Inteon, Touchdown brand, or Roundup brand product label for further 
information on weeds controlled. 
Preemergence Tank Mix Combinations (Applied Before the Crop has Emerged) 
Tank mix partners listed in Table 3 may be used in conventional, reduced, or no-till 
systems and be applied by the same methods and at the same timings as Camix unless 
otherwise specified in the tank mix product label. Follow all tank mix product labels for 
use rates and restrictions. Perform a compatibility test. Tank mixtures with 2,4-0 may 
be used, but only with care with regard to ensuring compatibility before mixing a load. 
2,4~0 products vary greatly with regard to compatibility and should be checked each 
time a water or carrier source, water or carrier temperature, product source, or tank· 
mixture recipe is changed.

-
( 
-25-
Table 3: Camix Tank Mixtures for Preemergence Applications in Corn 
Tank Mix Rate (Max.) Objective 
-- -- - . ----- - - -- _ .. _. -.- -- - - --- -_. -- - - _ .. - -- --- -
Mtrex or other solo 0.5-2.0 Ibs. a.i.lA Improved broad leaf and 
atrazine products grass weed control 
Gramoxone Inteon See product label Burndown existing weeds 
Princep® 0.5-2.0 Ibs. a.i.lA Improved broad leaf and 
grass weed control 
Touchdown Brands See product label Burndown existing weeds 
Roundup Brands See product label Burndown existing weeds 
2,4-0 See product label Burndown existing weeds 
Warrior 3.84 fl. oz'/A To control insects, such as 
cutworm 
Early Postemergence Tank Mix Combinations (Applied After the Crop has 
Emerged) 
Tank mix_products listed in Table 4 may be used in either conventional, reduced, or no­
till systems and be applied by the same methods and at the same timings as Camix 
unless otherwise specified in the tank mix product label. Follow all tank mix product 
labels for use rates and restrictions. Perform a compatibility test.

( 
-26-
Table 4: Camix Tank Mixtures for Postemergence Applications in Field Corn 
Tank Mix1 Rate (Max.) Objective 
- ----.--.--- .. -------~----- --- .--- .-- - -~-- - --- - _ . . - ~- -- -- - - - ---- - -_ .. _-- ------_. -- .. - - ~-- -
AAtrex or other solo 0.5-2.0 Ibs. a.i.lA Improved broad leaf and 
atrazine products annual grass weed control 
Warrior 3.84 fl. oz'/A To control insects, such as 
cutworm 
Accent® As per product label Emerged grass control 
Basis® As per product label Emerged grass control 
Liberty (only for corn As per product label Emerged grass control 
hybrids designated as 
LibertyLink) 
Steadfast® As per product label Emerged grass control 
Steadfast A TZ® As per product label Emerged grass control 
1Consult the "Adjuvant" section of this label for recommendations when applying Camix 
in tank mixture to emerged field corn. 
Camix Programs with Glyphosate for Glyphosate Tolerant Corn 
Camix may be applied early postemergence at a rate down to 1.6 qts.lA in tank mixture 
with a solo glyphosate product (e.g. Touchdown or Roundup brands) that is registered 
for use over-the-top in glyphosate tolerant field corn (e.g. Roundup Ready or Agrisure™ 
GT Corn). To minimize weed competition with the crop, target the application of this 
mixture to weeds in the 1 to 2 inch range. If the glyphosate product has a built-in 
adjuvant system (Le. the product label does not ask for additional adjuvant), only spray­
grade ammonium sulfate (AMS) at 8.5 Ibs.l100 gal. should be added to this mixture. If 
the glyphosate product label calls for an adjuvant in addition to AMS, add a non-ionic 
surfactant (NIS) at 0.25% v/v and AMS to this spray mixture. Do not add urea 
ammonium nitrate (UAN), crop oil concentrate (C~C), or methylated seed oil (MSO) 
type adjuvants to these mixtures, or crop injury may occur. Follow all directions for use 
and restrictions on the glyphosate product label. 
Alternatively, Camix may be applied preemergence at a rate down to 1.6 qts.lA as part 
of a two-pass weed control system when followed by a postemergence application of a 
glyphosate based product in glyphosate tolerant corn (e.g. Roundup Ready or Agrisure 
GT Corn). When used in this way, Camix will provide reduced competition of the weeds 
listed in Table 1 for a period of 30 or more days, thus improving the timing flexibility and

( 
-27-
effectiveness of the glyphosate based product application. Follow all directions for use 
and restrictions on the glyphosate product label. 
Camix Programs with Liberty for LibertyLink Corn 
Camix may be applied early postemergence at a rate down to 1.6 qts.lA in tank mixture 
with Liberty and applied over-the-top in field corn designated as LibertyLink. To 
minimize weed competition with the crop, target the application of this mixture to weeds 
in the 1 to 2 inch range. Ammonium sulfate (AMS) may be added as a spray adjuvant 
as directed on the Liberty label. However, AMS should be the only adjuvant added to 
this tank mixture. Do not add urea ammonium nitrate (UAN), crop oil concentrate 
(COC), non-ionic surfactants (NIS), or methylated seed oil (MSO) type adjuvants to 
these mixtures, or crop injury may occur. Follow all directions for use and restrictions 
on the Liberty product label. 
Alternatively, Camix may be applied preemergence at a rate down to 1.6 qts.lA as part 
of a two-pass weed control system when followed by a postemergence application of 
Liberty in field corn designated as LibertyLink. When used in this way, Camix will 
provide reduced competition of the weeds listed in Table 1 for a period of 30 or more 
days, thus improving the timing flexibility and effectiveness of the Liberty application. 
Follow all directions for use and restrictions on the Liberty product label. 
STORAGE AND DISPOSAL 
Do not contaminate water, food, or feed by storage or disposal. 
Pesticide Storage 
Keep container tightly closed when not in use. Do not store near seeds, fertilizers, or 
food stuffs. Can be stored at temperatures as low as -10°F. Keep away from heat and 
flame. 
Pesticide Disposal 
Open dumping is prohibited. Waste resulting from the use of this product may be 
disposed of on site or at an approved waste disposal facility. Rinse spray equipment. 
Pesticide wastes are acutely hazardous. Improper disposal of excess pesticide, spray 
mixture, or rinsate is a violation of Federal law. If these wastes cannot be disposed of 
as described above, contact your State Pesticide or Environmental Control Agency, or 
the Hazardous Waste Representative at the nearest EPA Regional Office for guidance. 
Container Handling [less than 5 gallons] 
Non-refillable container. Do not reuse or refill this container. Offer for recycling if 
available. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as 
3P -)~

( ( 
-28-
follows: Empty the remaining contents into application equipment or a mix tank. Drain 
for 10 seconds after the flow begins to drip. Fill the container X full with water and 
recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or 
store rinsate for later use and disposal. Drain for 10 seconds after the flow begins to 
_~ _______ priR-"---Rep.e_atthls prQce_dure_tw_o more_ times. __ Iben_offerfoLrecyclingjf available ___ oL ~ 
puncture and dispose of in a sanitary landfill, or by incineration, or, if allowed by state 
and local authorities, by burning. If burned, stay out of smoke. 
Container Handling [Bulk/Mini-Bulk] 
Refillable container. Refill this container with pesticide only. Do not reuse this container 
for any other purpose. Cleaning the container before final disposal is the responsibility 
of the person disposing of the container. Cleaning before refilling is the responsibility of 
the person refilling. To clean container before final disposal, empty the remaining 
contents from this container into application equipment or mix tank. Fill the container 
about 10 percent full with water. Agitate vigorously or re-circulate water with the pump 
for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection 
system. Repeat this rinsing procedure two more times. Then offer for recycling if 
available or puncture and dispose of in a sanitary landfill, or by incineration, or by other 
procedures approved by state and local authorities. 
DO NOT USE CONTAINERS FOR THE STORAGE OF FOOD, FEED, OR DRINKING 
WATER! 
AAtrex®, Agrisure ™ GT, Callisto®, Callisto Plant Technology®, Camix®, Concep®, 
Dual II Magnum®, Dual Magnum®, Gramoxone Inteon®, Princep®, Touchdown®, 
Warrior®, the Syngenta logo and the CP FRAME [icon] are trademarks of a Syngenta 
Group Company 
Accent®, Basis®, Steadfast®, and Steadfast ATZ® trademarks of E. I. du Pont de 
Nemours and Company 
Compex® trademark of KALO Agricultural Chemicals, Inc. 
Counter® trademark of BASF Corporation 
Impact® trademark of Amvac 
Laudis®, Liberty®, LibertyLink® trademark of Bayer CropScience 
Roundup®, trademark of Monsanto Company 
Unite® trademark of HACO, Inc. 
©20XX Syngenta 
) 1 --
)~

c 
-29-
For non-emergency information (e.g., current product information), call 
Syngenta Crop Protection at 1-800-334-9481 
----- -----_ .. - --- _._.- .... -- _. __ ._. -- - _ .. _-
Manufactured for: 
Syngenta Crop Protection, LLC 
P. O. Box 18300 
Greensboro, North Carolina 27419-8300

. " 
-30-
Base/Container Label 
2.5, 120, 220, 330 Gallon and Bulk 
Camix® 
Selective Herbicide ----
A Preemergence Herbicide for Control of Annual Grass and Broadleaf Weeds 
in Field Corn, Field Production Seed Corn, Field Silage Corn, Sweet Corn, and Yellow 
Popcorn 
Active Ingredients*: 
S-metolachlor: (CAS No. 87392-12-9) ................................................................. 36.80% 
Mesotrione: (CAS No.1 04206-82-8) ..................................................................... 3.68% 
Other Ingredients: 59.52% 
Total: 100.00% 
*Active ingredients per gallon: S-metolachlor 3.34 pounds, mesotrione 0.33 pounds. 
KEEP OUT OF REACH OF CHILDREN. 
WARNING/AVISO 
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en 
detalle. (If you do not understand the label, find someone to explain it to you in detail.) 
See additional precautionary statements and directions for use inside booklet. 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection 
Standard, 40 CFR Part 170. Refer to supplemental labeling under "Agricultural Use 
Requirements" in Directions for Use section for information about this standard. 
EPA Reg. No.1 00-1148 
EPA Est. 100-LA-001 
Callisro Plant Techno/o gy® 
2.5 gallons 
Net Contents 
___ g,allons 
Net Contents

, , 
( 
-31-
PRECAUTIONARY STATEMENTS 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
WARNING 
Causes substantial but temporary eye injury. Do not get in eyes or on clothing. Wear 
protective eye wear (goggles, face shield, or safety glasses). Wash thoroughly with 
soap and water after handling and before eating, drinking, chewing gum, or using 
tobacco. Remove and wash contaminated clothing before reuse. Wear long-sleeved 
shirt and long pants, socks, shoes, and gloves. Prolonged or frequently repeated skin 
contact may cause allergic reactions in some individuals. 
FIRST AID 
If in eyes • Hold eye open and rinse slowly and gently with water for 15-
20 minutes. 
• Remove contact lenses, if present, after the first 5 minutes, 
then continue rinsing eye. 
• Call a poison control center or doctor for treatment advice 
If on skin or • Take off contaminated clothing. 
clothing • Rinse skin immediately with plenty of water for 15-20 minutes. 
• Call a poison control center or doctor for treatment advice. 
If inhaled • Move person to fresh air. 
• If person is not breathing, call 911 or an ambulance, then give 
artificial respiration, preferably by mouth-to-mouth, if possible. 
• Call a poison control center or doctor for further treatment 
advice. 
If swallowed • Call a poison control center or doctor immediately for 
treatment advice. 
• Have person sip a glass of water if able to swallow. 
• Do not induce vomiting unless told to do so by the poison 
control center or doctor. 
• Do not give anything by mouth to an unconscious person. 
Have the product container or label with you when calling a poison control center 
or doctor or going for treatment. 
HOT LINE NUMBER 
For 24 Hour Medical Emergency Assistance (Human or Animal) 
or Chemical Emergency Assistance (Spill, Leak, Fire or Accident), 
Call 
1-800-888-8372 
Environmental Hazards 
Do not apply directly to water, to areas where surface water is present, or to intertidal 
areas below the mean high water mark. Do not contaminate water when disposing of

, ' ( ( I 
-32-
equipment wash water or rinsate. 
Ground Water Advisory 
__________ T'--'h~ ~_c:;tl'{~_ ingredient, _ S-m~!oJac:h!9r,_ h~?_Jo~_ poJenti9LtQJ~_a<;:hJl}ro_ygb ~9il i1]J09rQ1U1~L _ 
water under certain conditions as a result of agricultural use. Use of this product in 
areas where soils are permeable, particularly where the water table is shallow, may 
result in ground water contamination. 
Surface Water Advisory 
The active ingredients in this product have the potential to contaminate surface water 
through ground spray drift. Under some conditions, the active ingredients may also 
have a high potential for runoff into surface water (primarily via dissolution in runoff 
water) for several months post-application. These include poorly drained or wet soils 
with readily visible slopes toward adjacent surface waters, frequently flooded areas, 
areas overlaying extremely shallow ground water, areas with in-field canals or ditches 
that drain to surface water, areas not separated from adjacent surface waters with 
vegetated filter strips, and areas overlaying tile drainage systems that drain to surface 
water. 
A level, well maintained vegetative buffer strip between areas to which this product is 
applied and surface water features such as ponds, streams, and springs will reduce the 
potential for contamination of water from runoff. Runoff of this product will be reduced 
by avoiding applications when rainfall is forecasted to occur within 48 hours. Sound 
erosion control practices will reduce this product's contribution to surface water 
contamination. 
Mixing/Loading Instructions 
Care must be taken when using this product to prevent back siphoning into wells, spills, 
or improper disposal of excess pesticide, spray mixtures, or rinsates. 
Check valves or antisiphoning devices must be used on mixing equipment. 
This product may not be mixed/loaded or used within 50 ft. of wells, including 
abandoned wells, drainage wells, and sink holes. Operations that involve mixing, 
loading, rinsing, or washing of this product into or from pesticide handling or application 
equipment or containers within 50 ft. of any well are prohibited, unless conducted on an 
impervious pad constructed to withstand the weight of the heaviest load that may be 
positioned on or moved across the pad. Such a pad shall be designed and maintained 
to contain any product spills or equipment leaks, container or equipment rinse or wash 
water, and rain water that may fall on the pad. Surface water shall not be allowed to 
either flow over or from the pad, which means the pad must be self-contained. The pad 
shall be sloped to facilitate material removal. An unroofed pad shall be of sufficient 
capacity to contain at a minimum 110% of the capacity of the largest pesticide container

" ' ( , c 
-33-
or application equipment on the pad, A pad that is covered by a roof of sufficient size to 
completely exclude precipitation from contact with the pad shall have a minimum 
containment capacity of 100% of the capacity of the largest pesticide container or 
application equipment on the pad. Containment capacities as described above shall be 
maintained at all times. The above-specified minimum containment capacities do not 
-----a-p~ply toveniCies wne~n-d-ellvering -pesficlde ~shfpments to the mixing/loading sTfe. -~ 
Physical and Chemical Hazards 
Do not use or store near heat or open flame.

( 
( , 
-34-
[BULK]: 
CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY 
--------NOTICE:--Read the-entire--[)irectionsfor tJse-and-Conditions ot-Sale- and-timitation---of- -
Warranty and Liability before buying or using this product. If the terms are not 
acceptable, return the product at once, unopened, and the purchase price will be 
refunded. 
The Directions for Use of this product must be followed carefully. It is impossible to 
eliminate all risks inherently associated with the use of this product. Crop injury, 
ineffectiveness or other unintended consequences may result because of such factors 
as manner of use or application, weather or crop conditions, presence of other materials 
or other influencing factors in the use of the product, which are beyond the control of 
SYNGENTA CROP PROTECTION, LLC or Seller. To the extent permitted by 
applicable law, Buyer and User agree to hold SYNGENTA and Seller harmless for any 
claims relating to such factors. 
SYNGENTA warrants that this product conforms to the chemical description on the label 
and is reasonably fit for the purposes stated in the Directions for Use, subject to the 
inherent risks referred to above, when used in accordance with directions under normal 
use conditions. To the extent permitted by applicable law: (1) this warranty does not 
extend to the use of the product contrary to label instructions or under conditions not 
reasonably foreseeable to or beyond the control of Seller or SYNGENTA, and (2) Buyer 
and User assume the risk of any such use. TO THE EXTENT PERMITTED BY 
APPLICABLE LAW, SYNGENTA MAKES NO WARRANTIES OF MERCHANTABILITY 
OR OF FITNESS FOR A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR 
IMPLIED WARRANTY EXCEPT AS WARRANTED BY THIS LABEL. 
To the extent permitted by applicable law, in no event shall SYNGENTA be liable for 
any incidental, consequential or special damages resulting from the use or handling of 
this product. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THE 
EXCLUSIVE REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY 
OF SYNGENTA AND SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES 
OR DAMAGES (INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, 
CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) 
RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SHALL BE THE 
RETURN OF THE PURCHASE PRICE OF THE PRODUCT OR, AT THE ELECTION 
OF SYNGENTA OR SELLER, THE REPLACEMENT OF THE PRODUCT. 
SYNGENTA and Seller offer this product, and Buyer and User accept it, subject to the 
foregoing Conditions of Sale and Limitation of Warranty and Liabi\.ity, which may not be 
modified except by written agreement signed by a duly authorized representative of 
SYNGENTA.

( 
(~ 
'-. 
-35-
Container Handling [less than 5 gallons] 
Non-refillable container. Do not reuse or refill this container. Offer for recycling if 
available. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as 
- .. ----Jollows: .Empty.-the .. remaining-contents.into-application--equipment-or-a-mix-tank.-Drain- _ .. 
for 10 seconds after the flow begins to drip. Fill the container % full with water and 
recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or 
store rinsate for later use and disposal. Drain for 10 seconds after the flow begins to 
drip. Repeat this procedure two more times. Then offer for recycling if available or 
puncture and dispose of in a sanitary landfill, or by incineration, or, if allowed by state 
and local authorities, by burning. If burned, stay out of smoke. 
Container Handling [Bulk/Mini-Bulk] 
Refillable container. Refill this container with pesticide only. Do not reuse the container 
for any other purpose. Cleaning the container before final disposal is the responsibility 
of the person disposing of the container. Cleaning before refilling is the responsibility of 
the person refilling. To clean container before final disposal, empty the remaining 
contents from this container into application equipment or mix tank. Fill the container 
about 10 percent full with water. Agitate vigorously or recirculate water with the pump 
for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection 
system. Repeat this rinSing procedure two more times. Then offer for recycling if 
available or puncture and dispose of in a sanitary landfill, or by incineration, or by other 
procedures allowed by state and local authorities .. If the container is damaged, leaking, 
or obsolete, contact Syngenta Crop Protection, Inc. at 1-800-888-8372. 
DO NOT USE CONTAINERS FOR THE STORAGE OF FOOD, FEED, OR DRINKING 
WATER! 
Camix®, Callisto Plant Technology®, and the Syngenta logo are trademarks of a 
Syngenta Group Company 
©20XX Syngenta 
Manufactured for: 
Syngenta Crop Protection, LLC 
P. O. Box 18300 
Greensboro, North Carolina 27419-8300 
CAM 1148 MAS 0910 NOTIF FEB2011 CLEAN - pl- 2/25/11 
000100-01148.20110228.CAMIX_NOTIF JEB2011.pdf