#  Sivanto 400 SL

- EPA Reg No: **264-1198**
- Registrant: BAYER CROPSCIENCE, LLC
- Signal word: Caution
- Active ingredients: Flupyradifurone (33.61%)
- Label accepted: 2019-09-05
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000264-01198-20190905.pdf

---
September 5, 2019
Subject;
Dear Mr. Murphy;
PRIA Non-New-Use Label Acceptable v.20150320
OFFICE OF CHEMICAL SAFETY 
AND POLLUTION PREVENTION
The amended label referred to above, submitted in connection with registration under the Federal 
Insecticide, Fungicide and Rodenticide Act, as amended, is acceptable. This approval does not 
affect any conditions that were previously imposed on this registration. You continue to be 
subject to existing conditions on your registration and any deadlines connected with them.
A stamped copy of your labeling is enclosed for your records. This labeling supersedes all 
previously accepted labeling. You must submit one copy of the final printed labeling before you 
release the product for shipment with the new labeling. In accordance with 40 CFR 152.130(c), 
you may distribute or sell this product under the previously approved labeling for 18 months 
If om the date of this letter. After 18 months, you may only distribute or sell this product if it 
bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is 
defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3.
Should you wish to add/retain a reference to the company’s website on your label, then please be 
aware that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide 
Act and is subject to review by the Agency. If the website is false or misleading, the product 
would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40 
CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In addition, 
regardless of whether a website is referenced on your product’s label, claims made on the 
website may not substantially differ from those claims approved through the registration process. 
Therefore, should the Agency find or if it is brought to our attention that a website contains false 
or misleading statements or claims substantially differing from the EPA approved registration, 
the website will be referred to the EPA’s Office of Enforcement and Compliance.
PRIA Label Amendment - Adding soil uses for already approved use sites, 
revising plant back interval for sugar beets
Product Name; SIVANTO 400 SL
EPA Registration Number; 264-1198
Application Date; 11/15/18
Decision Number; 546527
Ian Murphy
Federal Registrations Manager
Bayer CropSciences
2 T.W. Alexander Drive
P.O. Box 12014
Research Triangle Park, NC 27709
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY 
WASHINGTON, DC 20460A \

Sincerely,
Your release for shipment of the product constitutes acceptance of these conditions. If these 
conditions are not complied with, the registration will be subject to cancellation in accordance 
with FIFRA section 6. If you have any questions, please contact Marianne Lewis by phone at 
(703) 308-8043, or via email at lewis.marianne@epa.gov.
Gene Benbow, Product Manager 7 
Invertebrate & Vertebrate Branch 3 
Registration Division (7505P) 
Office of Pesticide Programs
Page 2 of2
EPA Reg. No. 264-1198
Decision No. 546527

ACCEPTED
EPA Reg. No.
FLUPYRADIFURONE GROUP NSECTICIDE
SIVANTO 400 SL
TOTAL: 100.00%
Contains 3.34 pounds of flupyradifurone per U.S, gallon (400 grams Al/liter)
CAS No: 951659-40-8
EPA Reg. No. 264-1198 EPA Est.No.
Net Contents:
PRODUCED FOR
1
ACTIVE INGREDIENT(S):
FLUPYRADIFURONE: 
OTHER INGREDIENTS: 
33.61%
66.39%
See [Back][Side] Panel for First Aid Instructions and [Leaflet][Booklet] for Complete Precautionary Statements 
and Directions for Use. (Note to reviewer: Location of additional precautionary statements, directions for use will 
vary between those listed, depending on container type/size.)
Bayer CropScience
Bayer CropScience LP
800 N. Lindbergh Blvd. 
St. Louis, MO 63167
1-866-99BAYER (1-866-992-2937)
KEEP OUT OF REACH OF CHILDREN
CAUTION
For MEDICAL And TRANSPORTATION Emergencies ONLY Call 24 Hours A Day 1-800-334-7577 
For PRODUCT USE Information Call 1-866-99BAYER (1-866-992-2937)
09/05/2019
under the Federal insecticide. Fiaigiclde 
and Rdde<iuei£te Ad as amentled. lor the 
peiticid* registerea ufider
264-1198
[ ABN: SIVANTO® 400 HL; SIVANTO® HL]______________________________
For use in pest management, suppression of listed insects which vector diseases and maintenance of plant 
health.

FIRST AID
If Swallowed:
If in Eyes:
2
If on Skin or 
Clothing:
• Call a poison control center or doctor immediately for treatment advice.
• Have person sip a glass of water if able to swallow.
• Do not induce vomiting unless told to by a poison control center or doctor.
• Do not give anything by mouth to an unconscious person.
• Take off contaminated clothing.
• Rinse skin immediately with plenty of water for 15 to 20 minutes.
• Call a poison control center or doctor for treatment advice.
• Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, 
after the first 5 minutes, then continue rinsing.
• Call a poison control center or doctor for treatment advice.
In case of emergency, call the toll-free Bayer CropScience Emergency Response telephone number: 1-800-334-7577. 
Have the product container or label with you when calling a poison control center or doctor, or going for treatment.
Note to Physician: No specific antidote. Treat the patient symptomatically.

PRECAUTIONARY STATEMENTS
PERSONAL PROTECTIVE EQUIPMENT (PPE)
USER SAFETY RECOMMENDATIONS
ENVIRONMENTAL HAZARDS
3
Toxic to adult bees in laboratory studies via oral exposure, however, not toxic to bees through contact exposure, and field studies 
conducted with this product have shown no effects on honeybee colony development.
• Users should wash hands before eating, drinking, chewing gum, using tobacco or using the toilet
• Users should remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
• Users should remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as 
possible, wash thoroughly and change into clean clothing.
Terrestrial Use
Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark. Do not 
contaminate water when disposing of equipment washwater or rinsate.
Surface Water Advisory
Flupyradifurone and its degradate difluoroacetic acid may impact surface water quality due to runoff of rain water. This is especially 
true for poorly draining soils and soils with shallow ground water. Flupyradifurone and its degradate difluoroacetic acid are classified as 
having medium and high potential, respectively, for reaching surface water via run-off for several months or more after application. A 
level, well-maintained vegetative buffer strip between areas to which this product is applied and surface water features such as ponds, 
streams, and springs will reduce the potential loading of flupyradifurone and its degradate difluoroacetic acid from runoff water and 
sediment. Runoff of this product will be reduced by avoiding applications when rainfall is forecasted to occur within 48 hours.
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION
• Harmful if swallowed.
• Harmful if absorbed through skin.
• Causes moderate eye irritation.
• Avoid contact with eyes, skin, and clothing.
USER SAFETY REQUIREMENTS
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot 
water. Keep and wash PPE separately from other laundry.
Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product’s concentrate. Do not 
reuse them.
Applicators and other handlers must wear:
• Long sleeved shirt and long pants.
• Chemical resistant gloves made out of; barrier laminate, butyl rubber 14 mils, nitrile rubber s 14 mils, neoprene rubber 14 mils, 
natural rubber 2: 14 mils, polyethylene, polyvinyl chloride 14 mils, or viton 14 mils.
• Shoes and socks.
Non-Target Organisms
This pesticide is toxic to aquatic invertebrates. Drift and runoff may be hazardous to aquatic organisms in water adjacent to treated 
areas.

By using this product, user or buyer accepts the following Conditions, Disclaimer of Warranties and Limitations of Liability.
4
LIMITATIONS OF LIABILITY: TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER 
OR BUYER FOR ANY AND ALL LOSSES, INJURIES OR DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS 
PRODUCT, WHETHER IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, SHALL NOT 
EXCEED THE PURCHASE PRICE PAID, OR AT BAYER CROPSCIENCE ’S ELECTION, THE REPLACEMENT OF PRODUCT.
Ground Water Advisory
This chemical has properties and characteristics associated with chemicals detected in ground water. This chemical may leach into 
ground water if used in areas where soils are permeable, particularly where the water table is shallow.
DISCLAIMER OF WARRANTIES: TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BAYER CROPSCIENCE MAKES NO 
OTHER WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE OR 
OTHERWISE, THAT EXTEND BEYOND THE STATEMENTS MADE ON THIS LABEL. No agent of Bayer CropScience is authorized to 
make any warranties beyond those contained herein or to modify the warranties contained herein. TO THE EXTENT CONSISTENT 
WITH APPLICABLE LAW, BAYER CROPSCIENCE DISCLAIMS ANY LIABILITY WHATSOEVER FOR SPECIAL, INCIDENTAL OR 
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT.
CONDITIONS: The directions for use of this product are believed to be adequate and must be followed carefully. However, it is 
impossible to eliminate all risks associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences 
may result because of such factors as weather conditions, presence of other materials, or the manner of use or application, all of which 
are beyond the control of Bayer CropScience. To the extent consistent with applicable law, all such risks shall be assumed by the user or 
buyer.
CONDITIONS OF SALE AND LIMITATIONS OF WARRANTY AND LIABILITY 
Read the entire Directions for Use, Conditions, Disclaimer of Warranties and Limitations of Liability before using this product. If terms are 
not acceptable, return the unopened product container at once.

DIRECTIONS FOR USE
AGRICULTURE USE REQUIREMENTS
5
Not for safe, distribution or use in Nassau and Suffolk Counties New York except as permitted under FIFRA Section 24(c), 
Special Local Need Registration.
Exception: If the product is soil Injected or soil incorporated, the Worker Protection Standard under certain circumstances, allows
workers to enter the treated area without restrictions if there will be no contact with anything that has been treated.
It is a violation of Federal law to use this product in a manner inconsistent with its labeling 
Read the entire label before using this product.
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may 
be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide 
regulation.
Not for use on crops intended to be grown for seed unless specified otherwise in the crop specific sections of this label or allowed by 
state specific 24(c) labeling.
No aerial application in New York State.
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This Standard contains 
requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses and handlers of agricultural 
pesticides. It contains requirements fortraining, decontamination, and emergency assistance. It also contains specific instructions and 
exceptions pertaining to the statements on this label about personal protective equipment (PPE), notification to workers, and restricted- 
entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. Do not 
enter or allow worker entry into treated areas during the restricted entry interval (REI) of 4 Hour(s), with the exception of California and 
New York. In the state of California the REI is 12 hours. In the state of New York the REI is 4 hours for all listed crops except for grapes 
for which the REI is 12 hours.
POLLINATOR BEST MANAGEMENT PRACTICE
In order to minimize exposure to pollinators, it is recommended that foliar insecticides are applied late in the afternoon, evening, or at 
night outside of daily peak foraging periods.
PRODUCT INFORMATION
SIVANTO® 400 SL:
• is a broad-spectrum insecticide, formulated in a 3.34 lb Al/gallon (400 grams Al/liter) SL (soluble liquid);
• belongs to a class of chemicals known as the Butenolides;
• is acropetally systemic, moving from roots to the leaves in the case of soil applications;
• is translaminar through the leaf tissue and acropetally systemic, moving from points of contact to leaf tips in the case of foliar 
applications;
• can provide control of labeled pests on the underside of leaves; • is readily absorbed into leaf tissue and is considered “rainfast” within 
1 hour after spray dries.
USE RESTRICTIONS
• Do not tank mix with azole fungicides (FRAC group 3) during bloom period.
• Not for use on greenhouse or planthouse crops except where permitted in crop use specific directions or allowed by state specific 24(c) 
labeling.
• Foliar applications must be tank-mixed with a spray adjuvant / additive having spreading and penetrating properties to maximize leaf 
uptake and systemicity of the active ingredient within treated plants; please contact your local Bayer CropScience representative or PCA 
for specific recommendations by crop.
Refer to the specific use directions and restrictions in each Crop, Crop Group or Crop Subgroup table.
PPE required for early entry to treated areas (that is permitted under the Worker Protection Standard and that involves contact with 
anything that has been treated, such as plants, soil, or water), is:
• Coveralls
• Chemical resistant gloves made out of: barrier laminate, butyl rubber 14 mils, nitrile rubber 14 mils, neoprene rubber 14 mils, 
natural rubber 14 mils, polyethylene, polyvinyl chloride 14 mils, or viton 14 mils.
• Shoes and socks

CHEMIGATION
6
Public water system means a system for the provision to the public of piped water for human consumption if such system has at least 15 
service connections or regularly serves an average of at least 25 individuals daily at least 60 days out of the year. Chemigation systems 
connected to public water systems must contain a functional, reduced-pressure zone, back-flow preventer (RPZ) or the functional 
equivalent in the water supply line upstream from the point of pesticide introduction. As an option to the RPZ, the water from the public 
water system should be discharged into a reservoir tank prior to pesticide introduction. There shall be a complete physical break (air 
gap) between the outlet end of the fill pipe and to top or overflow rim of the reservoir tank of at least twice the inside diameter of the fill 
pipe. The pesticide injection pipeline must contain a functional automatic quick-closing check valve to prevent the flow of fluid back 
toward the injection pump. The pesticide injection pipeline must contain a functional normally closed solenoid-operated valve located on 
the intake side of the injection pump and connected to the system interlock to prevent fluid from being withdrawn from the supply tank 
when the irrigation system is either automatically or manually shut down. The system must contain functional interlocking controls to 
automatically shut off the pesticide injection pump when the water pump motor stops or in cases where there is no water pump, when 
the water pressure decreases to the point where pesticide distribution is adversely affected. Systems must use a metering pump such as 
a positive displacement injection pump (e.g. diaphragm pump) effectively designed and constructed of materials that are compatible with 
pesticides and capable of being fitted with a system interlock. Do not apply when wind speed favors drift beyond the area intended for 
treatment.
Uniform Water Distribution and System Calibration
The chemigation system must provide uniform distribution of treated water. Crop injury, lack of effectiveness, or illegal pesticide residues 
in the crop can result from non-uniform distribution of treated water. The chemigation system must be calibrated to uniformly apply the 
rates specified in crop-specific label sections. If you have questions about calibration, you should contact State Extension Service 
specialists, equipment manufacturers or other experts.
Types of Irrigation Systems
SIVANTO 400 SL may be applied by chemigation;
• for foliar applications, through overhead sprinkler-type irrigation systems, including center pivot, lateral move, side roll, or overhead 
solid-set systems or equivalent equipment; and
• for soil applications, through low-pressure drip, trickle or micro-sprinkler systems or equivalent equipment.
Chemigation Monitoring
A person knowledgeable of the chemigation system and responsible for its operation, or under the supervision of the responsible person, 
shall shut the system down and make necessary adjustments should the need arise.
Required System Safety Devices
The system must contain a functional check valve, vacuum relief valve, and low-pressure drain appropriately located on the irrigation 
pipeline to prevent water source contamination from backflow. The pesticide injection pipeline must contain a functional, automatic, 
quick-closing check valve to prevent the flow of fluid back toward the injection pump. The pesticide injection pipeline must also contain a 
functional, normally closed, solenoid-operated valve located on the intake side of the injection pump and connected to the system 
interlock to prevent fluid from being withdrawn from the supply tank when the irrigation system is either automatically or manually shut 
down. The system must contain functional interlocking controls to automatically shut off the pesticide injection pump when the water 
pump motor stops. The irrigation line or water pump must include a functional pressure switch, which will stop the water pump motor 
when the water pressure decreases to the point where pesticide distribution is adversely affected. Systems must use a metering pump, 
such as a positive displacement injection pump (e.g., diaphragm pump) effectively designed and constructed of materials that are 
compatible with pesticides and capable of being fitted with a system interlock.
Using Water from Public Water Systems
Do not connect an irrigation system (including greenhouse systems) used for pesticide application to a public water system unless the 
pesticide label-prescribed safety devices for public water systems are in place.
APPLICATION INSTRUCTIONS
SIVANTO 400 SL may be:
• applied as a foliar application using properly calibrated ground sprayers, fixed or rotary winged aircraft, or through properly designed, 
sprinkler-type overhead chemigation equipment (See Chemigation - Directions for Use section below); or
• applied as a soil application using low-pressure drip, trickle or micro-sprinkler chemigation, soil shank injection, plant drench, or a 
planthouse tray drench. For seedling flats or trays, only apply with broadcast, foliar applications or where product is intended to be 
washed from foliage to soil prior to drying on foliage.

Where states or local authorities have more stringent regulations, they should be observed.
7
In order to apply pesticides accurately, the chemical injection system must be kept clean, free of chemical or fertilizer residues and 
sediments. Refer to your owner’s manual or ask your equipment supplier for the cleaning procedure for your injection system.
Flushing and Cleaning the Chemical Injection System
At the end of the application period, allow time for all lines to flush the pesticide through all nozzles or emitters before turning off irrigation 
water. To ensure the lines are flushed and free of pesticides, a dye indicator may be injected into the lines to mark the end of the 
application period.
Droplet Size
Use nozzles and pressure that generate droplet sizes which provide sufficient control and coverage. Higher flow nozzles and lower 
pressures will produce larger droplets and minimize drift. Use larger droplet size when applying in hot, dry conditions (droplet 
evaporation is higher under these conditions, thus reducing the effective droplet size and increasing drift potential). Nozzles that deliver 
coarse spray droplets may be used to reduce spray drift provided spray volume per acre (GPA) is increased to maintain crop coverage. 
Applications with very course, extremely coarse, or ultra-coarse droplets will not provide adequate coverage.
Solid Set and Manually Controlled Linear Systems
For foliar application, injection should be applied at the end of the irrigation cycle and followed by sufficient water to flush the product out 
of the irrigation system.
Injection for Chemigation
Inject the specified dosage of SIVANTO 400 SL into the irrigation main water stream: (1) through a constant flow, metering device; (2) 
into the center of the main line flow via a pitot tube or equivalent; (3) at a point ahead of at least one, right-angle turn in the main stream 
flow such that thorough mixing with the irrigation water is ensured.
Aerial Applications
• Mount the spray boom on the aircraft so as to minimize drift caused by wing tip vortices.
• The minimum practical boom length should be used, and should not exceed 75% of the wing span or rotor diameter.
• Applications should not be made at a height greater than 10 feet above the top of the largest plants unless a greater height is required 
for aircraft safety.
• No aerial application in New York State.
Temperature Inversions
Drift potential is high during temperature inversions and applications should be avoided under these conditions. Temperature inversions 
are common on nights with limited cloud cover and light to no wind. They begin to form as the sun sets and often continue into the 
morning. Their presence can be indicated by ground fog. If fog is not present, inversions can also be identified by the movement of 
smoke or dust from a ground source — smoke or dust that layers and moves laterally in a concentrated cloud (under low wind conditions) 
indicates an inversion.
Wind Speed
Drift potential increases at wind speeds of less than 3 mph (due to inversion potential) or more than 10 mph. Applications during gusty or 
calm wind conditions should be avoided. However, many factors, including droplet size, canopy and equipment specifications determine 
drift potential at any given wind speed. For applications made in-furrow or below soil-level, wind speed restrictions are not applicable.
SPRAY DRIFT MANAGEMENT
The interaction of many equipment and weather related factors determine the potential for spray drift. The applicator is responsible for 
considering all of these factors when making application decisions. Consult the local Cooperative Extension for additional information. 
Avoiding spray drift is the responsibility of the applicator.
Center-Pivot and Automatic-Move Linear Systems
Inject the specified dosage per acre continuously for one complete revolution (center pivot) or move of the system. The system should 
be run at maximum speed. It is recommended that nozzles in the immediate area of control panels, chemical supply tanks, pumps, and 
system safety devices be plugged to prevent chemical contamination of these areas. The use of END GUNS is NOT RECOMMENDED. 
End guns that provide uneven distribution of treated water can result in lack of effectiveness or illegal pesticide residues in or on the 
crop.
Sensitive Areas
When applying adjacent to residential areas, water bodies, habitats know to have threatened or endangered species, or non-target 
crops, drift can be minimized to these areas by making application when the wind is direction is away from these areas.

INSECTICIDE RESISTANCE MANAGEMENT (IRAC) RECOMMENDATIONS
o
o
o
o
8
For resistance management, SIVANTO 400 SL contains a Group 4D insecticide. Any insect population may contain individuals naturally 
resistant to SIVANTO 400 SL and other Group 4D insecticides. The resistant individuals may dominate the insect population if this group 
of insecticides are used repeatedly in the same fields. Appropriate resistance-management strategies should be followed.To delay 
insecticide resistance, take one or more of the following steps:
IMPORTANT: Do not use PVA packets in a tank mix with products that contain boron or release free chlorine. The resultant reaction of 
PVA and boron or free chlorine is a plastic that is not soluble in water or solvents.
Order of Mixing
SIVANTO 400 SL may be used with other recommended pesticides, fertilizers, and micronutrients. The proper mixing procedure for 
SIVANTO 400 SL alone or in tank mix combinations with other pesticides is the following:
1. Fill the spray tank 1/4 to 1/3 full with clean water.
2. While recirculating and with the agitator running, add any products in PVA bags (See important). Allow time for thorough mixing.
3. Continue to fill spray tank with water until 1/2 full.
4. Add any wettable powder (WP), water dispersible granule (WG/WDG) products, or “flowable” (FL/SC) type products.
5. Allow enough time for thorough mixing of each product added to tank.
6. Add required amount of SIVANTO 400 SL.
7. If applicable, add any remaining tank mix components: emulsifiable concentrates (EC), fertilizers and micronutrients.
8. Fill spray tank to desired level and maintain constant agitation to ensure uniformity of spray mixture.
Compatibility
SIVANTO 400 SL is physically and biologically compatible with many registered pesticides and fertilizers or micronutrients. However, it is 
known that many components, including crop protection products, fertilizers, micronutrients, and spray adjuvants, may be present in a 
tank mix combination. There is potential for adverse chemical reactions. It is impossible to determine physical, biological, and plant 
compatibility for all scenarios that may be encountered; therefore, it is recommended that users determine the chemical, physical, 
biological, and plant compatibility of such mixes prior to application on a broad commercial scale.
• Rotate the use of SIVANTO 400 SL or other Group 4D insecticides within a growing season, or among growing seasons, with 
different groups that control the same pests
• Use tank mixtures with insecticides from a different group that are equally effective on the target pest when such use is 
permitted. Do not rely on the same mixture repeatedly for the same pest population. Consider any known cross-resistance 
issues (for the targeted pests) between the individual components of a mixture. In addition, consider the following 
recommendations provided by the Insecticide Resistance Action Committee (IRAC):
o
Mixtures with components having the same IRAC mode of action classification are not recommended for insect 
resistance management.
When using mixtures, consider any known cross-resistance issues between the individual components for the targeted 
pest(s).
Mixtures become less effective if resistance is already developing to one or both active ingredients, but they may still 
provide pest management benefits.
The insect resistance management benefits of an insecticide mixture are greatest if the two components have similar 
periods of residual insecticidal activity. Mixtures of insecticides with unequal periods of residual insecticide activity may 
offer an insect resistance management benefit only for the period where both insecticides are active.
• Adopt an integrated pest management program for insecticide use that includes scouting, uses historical information related to 
pesticide use, crop rotation, record keeping, and which considers cultural, biological and other chemical control practices.
• Monitor after application for unexpected target pest survival. If the level of survival suggests the presence of resistance, consult 
with your local university specialist or certified pest control advisor.
• Contact your local extension specialist or certified crop advisors for any additional pesticide resistance-management and/or IPM 
recommendations for the specific site and pest problems in your area.
• For further information or to report suspected resistance contact Bayer CropScience at 1-866-99BAYER (1-866-992-2937).
COMPATIBILITY TESTING AND TANK MIX PARTNERS
• If SIVANTO 400 SL is to be tank mixed with other pesticides, compatibility should be tested prior to mixing.
• It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable 
restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive 
directions for use and precautionary statements of each product in the tank mixture.
• Foliar applications must be tank-mixed with a spray adjuvant / additive having spreading and penetrating properties to maximize leaf 
uptake and systemicity of the active ingredient within treated plants; please contact your local Bayer CropScience representative or PCA 
for specific recommendations by crop.
Individual insecticides selected for use in mixtures should be highly effective and be applied at the rates at which they 
are individually registered for use against the
target species.

ROTATIONAL CROPS^
Treated areas may be replanted in accordance with the following schedule;
1
9
IMMEDIATE PLANT-BACK:
ALFALFA; BRASSICA (COLE) LEAFY VEGETABLES (Crop Group 5); BUSHBERRY (Crop Subgroup 13-07B); BLUEBERRY; 
CANEBERRY (Crop Subgroup 13-07A); CEREAL GRAINS (Crop Group 15) and FORAGE, FODDER AND STRAW OF CEREAL 
GRAINS (Crop Group 16); CHRISTMAS TREES; CITRUS FRUITS (Crop Group 10-10); CLOVER^; COTTONSEED (Crop Subgroup 
20C); CUCURBIT VEGETABLES (Crop Group 9); FRUITING VEGETABLES (Crop Group 8-10); HOP; KAVA; LEAFY VEGETABLES
- EXCEPT BRASSICA VEGETABLES (Crop Group 4); LEGUME VEGETABLES - SUCCULENT OR DRIED (Crop Group 6) and 
FOLIAGE OF LEGUME VEGETABLES - FOR ANIMAL FEED (Crop Group 7); LOW GROWING BERRY (Crop Subgroup 13-07G) - 
EXCEPT CRANBERRY; PEANUT; POME FRUITS (Crop Group 11-10); ROOT VEGETABLES - EXCEPT SUGARBEET (Subgroup
IB) ; SMALL FRUIT VINE CLIMBING - EXCEPT FUZZY KIWIFRUIT (Crop Subgroup 13-07F); SORGHUM; STONE FRUITS (Crop 
Group 12-12); TARO LEAVES; TREE NUTS (Crop Group 14-12) - EXCEPT ALMOND; TROPICAL AND SUBTROPICAL, MEDIUM 
TO LARGE FRUIT, SMOOTH, INEDIBLE PEEL (Crop Subgroup 24B); TUBEROUS AND CORM VEGETABLES (Crop Subgroup
IC) ; TURNIP GREENS
6-MONTH PLANT-BACK:
Sugar beet
12-MONTH PLANT-BACK:
For crops not listed on this label, or for crops for which no tolerances for the active ingredients have been established, the plant-back 
interval must be observed.
Cover crops for soil building or erosion control may be planted any time, but do not graze or harvest for food or feed. 
9
For Idaho, Oregon and Washington Only, 
o
Sugarcane: 12-month plant back in all registered states except for Florida (14-Day).
14-DAY PLANT-BACK: 
Sugarcane (Florida Only^)

SPECIFIC CROP DIRECTIONS
• Choose lower rate for light infestations and the higher rate for heavy infestations.
Pest Controlled Product Rate (fl oz/A)
Aphids 3.5- 7.0
Leafhoppers
Three-cornered alfalfa hopper 5.5- 7.0
Whiteflies
Pest Suppressed Product Rate (fl oz/A)
7.0
Pest Controlled Product Rate (fl oz/A)
Aphids (except green peach aphid) 3.5- 7.0
Leafhoppers
Green peach aphid 5.5- 7.0
Whiteflies
10
Tarnished plant bug 
{Lygus lineolaris)
Western plant bug 
(Lygus hesperus)
BRASSICA (COLE) LEAFY VEGETABLES (Crop Group 5) 
FOLIAR
Application Restrictions:
Pre-Harvest Interval (PHI): 7 Day(s)
Minimum interval between applications: 10 Day(s)
Minimum Application Volume: 10 Gallons/Acre | Ground ; 3 Gallons/Acre | Aerial
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on alfalfa, 
regardless of product or formulation.
Application Restrictions:
Pre-Harvest Interval (PHI): 1 Day(s)Minimum interval between applications: 7 Day(s) Minimum Application Volume: 10 Gallons/Acre | 
Ground ; 3 Gallons/Acre | Aerial
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Crop Season on brassica (cole) 
leafy vegetables, regardless of method of application, product or formulation.
Maximum number of crop seasons per year: 3
Broccoli; Broccoli raab (rapini); Broccoli, Chinese (gai Ion); Brussels sprouts; Cabbage; Cabbage, Chinese (bok choy); Cabbage, 
Chinese (napa); Cabbage, Chinese mustard (gai choy); Cauliflower; Cavalo broccolo; Collards; Kale; Kohlrabi; Mizuna; Mustard greens; 
Mustard spinach; Rape greens
ALFALFA
FOLIAR - Grown For Forage, Fodder, Seed, Straw, and Hay

Pest Controlled Product Rate (fl oz/A)
Aphids 10.5- 14.0
Leafhoppers
Whitefiies
11
Application Information:
SIVANTO 400 SL may be applied at the specified dosage by the following methods:
• Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment
• Injection below the eventual seed line prior to planting. Place SIVANTO 400 SL 3 - 4 inches below seed line
• In-furrow spray at planting
• Potting hole drench at transplanting
• Post-transplant drench following setting and covering
BRASSICA (COLE) LEAFY VEGETABLES (Crop Group 5) 
SOIL
Application Restrictions:
Pre-Harvest Interval (PHI): 21 Day(s)
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Crop Season on brassica (cole) 
leafy vegetables, regardless of method of application, product or formulation.
Maximum number of crop seasons per year: 3
Broccoli; Broccoli raab (rapini); Broccoli, Chinese (gai Ion); Brussels sprouts; Cabbage; Cabbage, Chinese (bok choy); Cabbage, 
Chinese (napa); Cabbage, Chinese mustard (gai choy); Cauliflower; Cavalo broccolo; Collards; Kale; Kohlrabi; Mizuna; Mustard greens; 
Mustard spinach; Rape greens

Pest Controlled Product Rate (fl oz/A)
Aphids 3.5- 7.0
5.5- 7.0
Blueberry maggot 6.0- 7.0
Pest Suppressed Product Rate (fl oz/A)
5.5- 7.0
7.0
12
Aronia berry; Blueberry, highbush; Blueberry, lowbush; Chilean guava; Currant (black, buffalo, native and red); Elderberry; European 
barberry; Gooseberry; Highbush cranberry; Honeysuckle, edible; Huckleberry; Jostaberry; Juneberry; Lingonberry; Salal; Sea buckthorn; 
cultivars, varieties and/or hybrids of these
Blueberry thrips-feeding damage reduction
{Frankliniella vaccinii)
Blueberry thrips 
{Scirtothrips ci tri)
Chilli thrips 
(Scirtothrips dorsalis)
BUSHBERRY (Crop Subgroup 13-07B) 
FOLIAR
Application Restrictions:
Pre-Harvest Interval (PHI): 3 Day(s)
Minimum interval between applications: 7 Day(s)
Minimum Application Volume: 25 Gallons/Acre | Ground ; 3 Gallons/Acre | Aerial
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on bushberry, 
regardless of method of application, product or formulation.

Pest Controlled Product Rate (fl oz/A)
Aphids 3.5 - 7.0
5.5 - 7.0
Blueberry maggot 6.0 - 7.0
Pest Suppressed Product Rate (fl oz/A)
5.5 - 7.0
7.0
,®
Pest Suppressed Product Rate (fl oz/A)
Blueberry stem gall wasp 4.7 - 7.0
13
Aronia berry; Blueberry, highbush; Blueberry, lowbush; Chilean guava; Currant (black, buffalo, native and red); Elderberry; European 
barberry; Gooseberry; Highbush cranberry; Honeysuckle, edible; Huckleberry; Jostaberry; Juneberry; Lingonberry; Salal; Sea buckthorn; 
cultivars, varieties and/or hybrids of these
Blueberry thrips-feeding damage reduction 
(Frankliniella vaccinii)
Blueberry thrips 
(Scirtothrips citri)
Chilli thrips 
(Sciriothrips dorsalis)
Application Information:
SIVANTO 400 SL may be applied at the specified dosage by the following methods:
• Potting hole drench at transplanting
• Chemigation into root-zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment
Application Information:
Stad sprays at early bloom through 7 days after petal fall.
BUSHBERRY (Crop Subgroup 13-07B) 
SOIL
Application Restrictions:
Pre-Harvest Interval (PHI): 30 Day(s)
Minimum interval between applications: 3 Day(s)
Minimum Application Volume: 25 Gallons/Acre | Ground ; 3 Gallons/Acre | Aerial
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on blueberry, 
regardless of method of application, product or formulation.
Application Restrictions:
Pre-Harvest Interval (PHI): 30 Day(s)
Do not apply more than 14 fl oz of SIVANTO® 400 SL ( 0.365 Pounds Flupyradifurone, 0.365 Pounds Flupyradifurone)per Acre Per 
Crop Season on bushberry, regardless of method of application, product or formulation.
Maximum number of crop seasons per year: 3
BLUEBERRY
FOLIAR

Blackberry; Loganberry; Raspberry (black and red); Wild raspberry; cultivars, varieties and/or hybrids of these
Pest Controlled Product Rate (fl oz/A)
Aphids 3.5- 7.0
Whiteflies 5.5- 7.0
Pest Controlled Product Rate (fl oz/A)
Aphids 3.5- 7.0
Leafhoppers
Whiteflies 5.5- 7.0
1
14
CANEBERRY (Crop Subgroup 13-07A) 
FOLIAR
Application Restrictions:
Pre-Harvest Interval (PHI): 0 Day(s) 
Minimum interval between applications: 7 Day(s)
Minimum Application Volume: 30 Gallons/Acre | Ground ; 3 Gallons/Acre | Aerial
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Year on caneberry, regardless of 
product or formulation.
Application Restrictions:
Pre-Harvest Interval (PHI): 7 Day(s) - hay, forage or sweet corn
Pre-Harvest Interval (PHI): 21 Day(s) - dried grain, stover or straw
Minimum interval between applications: 7 Day(s)
Minimum Application Volume: 10 Gallons/Acre | Ground ; 3 Gallons/Acre | Aerial
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on cereal grains, 
regardless of method of application, product or formulation.
CEREAL GRAINS (Crop Group 15) and FORAGE, FODDER AND STRAW OF CEREAL GRAINS (Crop Group 16) 
FOLIAR - Including production for seed
Application Information:
See separate Use Table for Sorghum - Soil application instructions
Quinoa
Crop Group 15 (excluding Rice; Wild rice) - Barley; Buckwheat; Corn (field corn, grown for seed, sweet com and popcorn); Millet,
pearl; Millet, proso; Oats; Rye; Sorghum (except sweet sorghum grown for syrup) ; Teosinte; Triticale; Wheat.
Crop Group 16 (excluding Rice; Wild rice) - Barley; Buckwheat; Com (field corn, grown for seed, sweet com and popcorn); Millet, 
4
pearl; Millet, proso; Oats; Rye; Sorghum (except sweet sorghum grown for syrup) ; Teosinte; Triticale; Wheat

Pest Controlled Product Rate (fl oz/A)
Aphids 3.5- 7.0
Pest Controlled Product Rate (fl oz/A)
Aphids 3.5- 7.0
Citrus mealybug
Asian citrus psyllid 5.5- 7.0
Citricola scale
Whiteflies
Pest Suppressed Product Rate (fl oz/A)
5.5- 7.0
Katydid nymphs
Citrus leafminer 7.0
1
15
Calamondin; Citron; Citrus hybrids; Grapefruit; Japanese summer grapefruit; Kumquat; Lemon; Lime; Lime (Sweet, Australian desert. 
Australian finger, Australian round. Brown River finger. Mount White, New Guinea wild, Russell River, Tahiti); Mediterranean mandarin; 
Orange (sour, sweet, Tachibana, Trifoliate); Pummelo; Satsuma mandarin; Tangelo; Tangerine (Mandarin); Tangor; Uniq fruit; cultivars, 
varieties and/or hybrids of these
Barnacle scaleCitrus thrips 
{Scirtothrips ci tri)
Application Information:
Start treatments when pests are first detected.
Use the higher rate for higher pest infestation levels.
CHRISTMAS TREES 
FOLIAR
CITRUS FRUITS (Crop Group 10-10) 
FOLIAR
Application Restrictions:
Minimum Application Volume: 25 Gallons/Acre | Ground ; 10 Gallons/Acre J Aerial 
Minimum interval between applications; 7 Day(s)
Application Restrictions:
Pre-Harvest Interval (PHI): 1 Day(s) 
Minimum interval between applications: 10 Day(s)
Minimum Application Volume: 50 Gallons/Acre | Ground ; 10 Gallons/Acre | Aerial 
For Florida only- Minimum Application Volume: 2.5 Gallons/Acre | Ground; For Florida and Texas only: Minimum Application Volume: 3 
Gallons/Acre | Aerial for control of Asian citrus psyllid. For control or suppression of other pests, application volumes should be 
increased to provide thorough and complete coverage to obtain adequate control.
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Fiupyradifurone) per Acre Per Calendar Year on citrus fruit.
Application Information:
Time SIVANTO 400 SL applications for contol of barnacle scale according to crawler stage. Two applications may be required to 
achieve best efficacy.

regardless of method of application, product or formulation.
Pest Controlled Product Rate (fl oz/A)
Aphids 10.5- 14.0
Asian citrus psyllid
Whiteflies
Pest Suppressed Product Rate (fl oz/A)
14.0
16
Calamondin; Citron; Citrus hybrids; Grapefruit; Japanese summer grapefruit; Kumquat; Lemon; Lime; Lime (Sweet, Australian desert, 
Australian finger, Australian round. Brown River finger. Mount White, New Guinea wild, Russell River, Tahiti); Mediterranean mandarin; 
Orange (sour, sweet, Tachibana, Trifoliate); Pummelo; Satsuma mandarin; Tangelo; Tangerine (Mandarin); Tangor; Uniq fruit; cultivars, 
varieties and/or hybrids of these
Citrus canker 
(Xanthomonas citri subsp. Citri)
Application Information:
SIVANTO 400 SL may be applied at the specified dosage by the following methods:
• Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment
• Basal drench in sufficient water to move SIVANTO 400 SL into root zone
• Shank or subsurface side-dress, injected to a depth just above or just within the root zone and between the trunk and drip line of the 
tree canopy. Apply product in a minimum of 10 gallons per acre using multiple shanks on both sides of trees. Ensure product placement 
is below sod or orchard floor debris. Irrigation covering entire treated area should follow within 48 hours to promote uptake by root 
system.
CITRUS FRUITS (Crop Group 10-10) 
SOIL
Application Restrictions:
Pre-Harvest Interval (PHI): 30 Day(s)
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on citrus fruit, 
regardless of method of application, product or formulation.

Pest Controlled Product Rate (fl oz/A)
Aphids 3.5- 7.0
Leafhoppers
Pest Controlled Product Rate (fl oz/A)
Aphids 3.5- 7.0
Fleahoppers
Whiteflies 5.5- 7.0
17
COTTONSEED (Crop Subgroup 20C) 
FOLIAR - Including Production for Seed
Application Restrictions:
Pre-Harvest Interval (PHI): 14 Day(s)
Minimum interval between applications: 10 Day(s)
Minimum Application Volume: 10 Gallons/Acre | Ground ; 3 Gallons/Acre | Aerial
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Fiupyradifurone) per Acre Per Calendar Year on cotton, 
regardless of product or formulation.
CLOVER^
FOLIAR - Grown For Forage, Fodder, Seed, Straw and Hay
Application Restrictions:
Pre-Harvest Interval (PHI): 14 Day(s)
Minimum interval between applications: 10 Day(s)
Minimum Application Volume: 10 Gallons/Acre | Ground ; 3 Gallons/Acre | Aerial
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Fiupyradifurone) per Acre Per Calendar Year on clover, 
regardless of product or formulation.
^Only For Use in: ldaho,Oregon and Washington.

Pest Controlled Product Rate (fl oz/A)
Aphids (except green peach aphid) 3.5- 7.0
Leafhoppers
Green peach aphid 5.5- 7.0
Squash bug
Whiteflies
Disease Suppressed Product Rate (fl oz/A)
CYSDV - Cucurbit yellow stunting disorder virus 7.0
18
Chayote (fruit); Chinese waxgourd (Chinese preserving melon); Citron melon; Cucumber; Gherkin; Gourd, edible (includes hyotan, 
cucuzza, hechima, Chinese okra); Momordica spp. (includes balsam apple, balsam pear, bitter melon, Chinese cucumber); Muskmelon 
(hybrids and/or cultivars of Cucumis melo including true cantaloupe, cantaloupe, casaba, Crenshaw melon, golden pershaw melon, 
honeydew melon, honey balls, mango melon, Persian melon, pineapple melon, Santa Claus melon, and snake melon); Pumpkin; 
Squash , summer (includes crookneck squash, scallop squash, straightneck squash, vegetable marrow, zucchini); Squash, winter 
(includes butternut squash, calabaza, hubbard squash, acorn squash, spaghetti squash); Watermelon (includes hybrids and/or varieties 
of Citrullus lanatus)
Application Information:
A mild yellowing on leaf margins is sometimes seen following application of SIVANTO 400 SL in cucurbits.
CUCURBIT VEGETABLES (Crop Group 9) 
FOLIAR
Application Restrictions:
Pre-Harvest Interval (PHI): 1 Day(s) 
Minimum interval between applications: 7 Day(s)
Minimum Application Volume: 10 Gallons/Acre | Ground ; 3 Gallons/Acre | Aerial
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on cucurbit 
vegetables, regardless of method of application, product or formulation. 
Do not apply SIVANTO 400 SL as a foliar application to muskmelon (hybrids and/or cultivars of Cucumis melo including true cantaloupe, 
cantaloupe, casaba, Crenshaw melon, golden pershaw melon, honeydew melon, honey balls, mango melon, Persian melon, pineapple 
melon, Santa Claus melon, and snake melon).

Pest Controlled Product Rate (fl oz/A)
Aphids 10.5- 14.0
Leafhoppers
Whiteflies
Disease Suppressed Product Rate (fl oz/A)
CYSDV - Cucurbit yellow stunting disorder virus 14.0
19
Chayote (fruit); Chinese waxgourd (Chinese preserving melon); Citron melon; Cucumber; Gherkin; Gourd, edible (includes hyotan, 
cucuzza, hechima, Chinese okra); Momordica spp. (includes balsam apple, balsam pear, bitter melon, Chinese cucumber); Muskmelon 
(hybrids and/or cultivars of Cucumis melo including true cantaloupe, cantaloupe, casaba, Crenshaw melon, golden pershaw melon, 
honeydew melon, honey balls, mango melon, Persian melon, pineapple melon, Santa Claus melon, and snake melon); Pumpkin; 
Squash , summer (includes crookneck squash, scallop squash, straightneck squash, vegetable marrow, zucchini); Squash, winter 
(includes butternut squash, calabaza, hubbard squash, acorn squash, spaghetti squash); Watermelon (includes hybrids and/or varieties 
of Citrullus lanatus)
Application Information:
SIVANTO 400 SL may be applied at the specified dosage by the following methods:
• Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment
• Injection below the eventual seed line prior to planting. Place SIVANTO 400 SL 3-4 inches below seed line* In-furrow spray at planting
• Potting hole drench at transplanting
• Post-transplant drench following setting and covering
A mild yellowing on leaf margins is sometimes seen following application of SIVANTO 400 SL in cucurbits.
CUCURBIT VEGETABLES (Crop Group 9) 
SOIL
Application Restrictions:
Pre-Harvest Interval (PHI): 21 Day(s)
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Crop Season on cucurbit 
vegetables, regardless of method of application, product or formulation.
Maximum number of crop seasons per year: 3

Pest Controlled Product Rate (fl oz/10,000 Plants)
Aphids 0.17
Leafhoppers
Whiteflies
Disease Suppressed Product Rate (fl oz/10,000 Plants)
CYSDV - Cucurbit yellow stunting disorder virus 0.17
20
Chayote (fruit); Chinese waxgourd (Chinese preserving melon); Citron melon; Cucumber; Gherkin; Gourd, edible (includes hyotan, 
cucuzza, hechima, Chinese okra); Momordica spp. (includes balsam apple, balsam pear, bitter melon, Chinese cucumber); Muskmelon 
(hybrids and/or cultivars of Cucumis melo including true cantaloupe, cantaloupe, casaba, Crenshaw melon, golden pershaw melon, 
honeydew melon, honey balls, mango melon, Persian melon, pineapple melon, Santa Claus melon, and snake melon); Pumpkin; 
Squash , summer (includes crookneck squash, scallop squash, straightneck squash, vegetable marrow, zucchini); Squash, winter 
(includes butternut squash, calabaza, hubbard squash, acorn squash, spaghetti squash); Watermelon (includes hybrids and/or varieties 
of Citrullus lanatus)
Application Information:
Apply specified dosage to seedlings in trays in the planthouse, targeting potting media (tray drench) between 24 hours and 7 days prior 
to transplanting, in one of the following methods:
• Uniform, broadcast high-volume foliar spray, followed immediately by sufficient overhead irrigation to wash SIVANTO 400 SL from 
foliage into potting media without loss of gravitational liquid from the bottom of the tray. Failure to wash SIVANTO 400 SL from foliage 
may result in reduced pest control
• Injection into overhead irrigation system, using adequate volume to thoroughly saturate potting media without loss of gravitational 
solution from the bottom of the tray
The application made in the planthouse will only provide short-term protection and is not intended as a substitution for a field application. 
An additional field application must be made within 2 weeks following transplanting to provide continuous protection. Transplants must 
be handled carefully during setting to avoid dislodging treated potting media from roots.
Not all varieties of cucurbit vegetables have been tested for adverse crop response to SIVANTO 400 SL applied to seedling flats. It is 
therefore recommended to treat a small number of plants and confirm crop tolerance for 7 days prior to treating entire planthouse.
CUCURBIT VEGETABLES (Crop Group 9) 
PLANTHOUSE
Application Restrictions: 
Only for use on seedlings intended as transplants.
Not for use in Greenhouses.
Pre-Harvest Interval (PHI): 21 Day(s)
Maximum SIVANTO 400 SL applied in the planthouse: 0.17 fl oz/10,000 plants (0.011 lb Flupyradifurone) 
Maximum number of SIVANTO 400 SL applications in planthouse per crop: 1
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Crop Season on cucurbit 
vegetables, regardless of method of application, product or formulation.

Pest Controlled Product Rate (fl oz/A)
Aphids (except green peach aphid) 3.5- 7.0
Leafhoppers
Colorado potato beetle 5.5- 7.0
Green peach aphid
Psyllids
Whiteflies
Disease Suppressed Product Rate (fl oz/A)
P/LCV - Tomato yellow leaf curl virus 7.0
Pest Suppressed Product Rate (fl oz/A)
6.0- 7.0
21
Chilli thrips 
{Scirtothrips dorsalis)
African eggplant; Cocona; Eggplant; Garden huckleberry; Goji berry; Groundcherry; Martynia; Naranjilla; Okra; Pea eggplant; Pepino; 
Pepper, bell; Pepper, nonbell; Roselle; Scarlet eggplant; Sunberry; Tomatillo; Tomato (including bush, currant, tree); cultivars, varieties 
and/or hybrids of these
FRUITING VEGETABLES (Crop Group 8-10)
FOLIAR
Application Restrictions:
Pre-Harvest Interval (PHI): 1 Day(s)
Minimum interval between applications: 7 Day(s)
Minimum Application Volume: 10 Gallons/Acre | Ground ; 3 Gallons/Acre | Aerial
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on fruiting 
vegetables, regardless of product or formulation.

Disease Controlled Product Rate (fl oz/A)
P/LCV - Tomato yellow leaf curl virus 14.0
Pest Controlled Product Rate (fl oz/A)
Aphids 10.5- 14.0
Leafhoppers
Psyltids
Whitefiies
22
African eggplant; Cocona; Eggplant; Garden huckleberry; Goji berry; Groundcherry; Martynia; Naranjilla; Okra; Pea eggplant; Pepino; 
Pepper, bell; Pepper, nonbell; Roselle; Scarlet eggplant; Sunberry; Tomatillo; Tomato (including bush, currant, tree); cultivars, varieties 
and/or hybrids of these
Application Information:
SIVANTO 400 SL may be applied at the specified dosage by the following methods:
• Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment
• Injection below the eventual seed line prior to planting. Place SIVANTO 400 SL 3-4 inches below seed line
• In-furrow spray at planting
• Potting hole drench at transplanting
• Post-transplant drench following setting and covering
FRUITING VEGETABLES (Crop Group 8-10) 
SOIL
Application Restrictions:
Pre-Harvest Interval (PHI): 45 Day(s)
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Crop Season on fruiting 
vegetables, regardless of method of application, product or formulation.
Maximum number of crop seasons per year: 3

Pest Controlled Product Rate (fl oz/10,000 Plants)
Aphids 0.17
Leafhoppers
Psyllids
Whitefiies
Disease Suppressed Product Rate (fl oz/10,000 Plants)
TYLCV - Tomato yellow leaf curl virus 0.17
23
African eggplant; Cocona; Eggplant; Garden huckleberry; Goji berry; Groundcherry; Martynia; Naranjilla; Okra; Pea eggplant; Pepino; 
Pepper, bell; Pepper, nonbell; Roselle; Scarlet eggplant; Sunberry; Tomatillo; Tomato (including bush, currant, tree); cultivars, varieties 
and/or hybrids of these
Application Information:
Apply specified dosage to seedlings in trays in the planthouse, targeting potting media (tray drench) between 24 hours and 7 days prior 
to transplanting, in one of the following methods:
• Uniform, broadcast high-volume foliar spray, followed immediately by sufficient overhead irrigation to wash SIVANTO 400 SL from 
foliage into potting media without loss of gravitational liquid from the bottom of the tray. Failure to wash SIVANTO 400 SL from foliage 
may result in reduced pest control
• Injection into overhead irrigation system, using adequate volume to thoroughly saturate potting media without loss of gravitational 
solution from the bottom of the tray
The application made in the planthouse will only provide short-term protection and is not intended as a substitution for a field application. 
An additional field application must be made within 2 weeks following transplanting to provide continuous protection. Transplants must 
be handled carefully during setting to avoid dislodging treated potting media from roots.
Not all varieties of fruiting vegetables have been tested for adverse crop response to SIVANTO 400 SL applied to seedling flats. It is 
therefore recommended to treat a small number of plants and confirm crop tolerance for 7 days prior to treating entire planthouse.
FRUITING VEGETABLES (Crop Group 8-10)
PLANTHOUSE
Application Restrictions:
Only for use on seedlings intended as transplants.
Not for use in Greenhouses.
Pre-Harvest Interval (PHI): 45 Day(s)
Maximum SIVANTO 400 SL applied in the planthouse: 0.17 fl oz/10,000 plants (0.011 Pound Flupyradifurone) 
Maximum number of SIVANTO 400 SL applications in planthouse per crop: 1
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Crop Season on fruiting 
vegetables, regardless of method of application, product or formulation.

Pest Controlled Product Rate (fl oz/A)
Aphids 3.5 - 5.3
Kava Leaves; Kava Root
Pest Controlled Product Rate (fl oz/A)
Aphids (except green peach aphid) 3.5 - 7.0
Leafhoppers
Green peach aphid 5.5 - 7.0
Whitefiies
24
KAVA 
FOLIAR
Application Restrictions:
Pre-Harvest Interval (PHI): 7 Day(s) 
Minimum interval between applications: 10 Day(s)
Minimum Application Volume: 10 Gallons/Acre | Ground ; 3 Gallons/Acre | Aerial 
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Crop Season on brassica (cole) 
leafy vegetables, regardless of method of application, product or formulation.
Maximum number of crop seasons per year: 3
Application Restrictions:
Pre-Harvest Interval (PHI): 21 Day(s)
Minimum Application Volume: 25 Gallons/Acre | Ground ; 10 Gallons/Acre | Aerial
Do not apply more than 5.3 fl oz of SIVANTO 400 SL (0.14 Pounds Flupyradifurone) per Acre Per Calendar Year on hop, regardless 
of product or formulation.
HOP 
FOLIAR

LEAFY VEGETABLES - EXCEPT BRASSICA VEGETABLES (Crop Group 4)FOLIAR
Pest Controlled Product Rate (fl oz/A)
Aphids (except green peach aphid) 3.5- 7.0
Leafhoppers
Green peach aphid 5.5- 7.0
Whitefiies
25
Application Restrictions:
Pre-Harvest Interval (PHI): 1 Day(s) 
Minimum interval between applications: 7 Day(s)
Minimum Application Volume: 10 Gallons/Acre | Ground ; 3 Gallons/Acre | Aerial 
Do not apply more than 14 fl oz of SIVANTO 400 SL ( 0.365 Pounds Flupyradifurone)per Acre Per Crop Season on leafy vegetables, 
regardless of method of application, product or formulation.
Maximum number of crop seasons per year: 3
Cilantro, fresh leaves
Amaranth (leafy amaranth, Chinese spinach, tampala); Arugula (Roquette); Cardoon; Celery; Celery, Chinese; Celtuce; Chervil; 
Chrysanthemum (edible-leaved and garland); Corn salad; Cress, garden; Cress, upland (yellow rocket, winter cress); Dandelion; Dock 
(sorrel); Endive (escarole); Fennel, Florence (finochio); Lettuce (head and leaf); Orach; Parsley; Purslane, garden; Purslane, winter; 
Radicchio (red chicory); Rhubarb; Spinach; Spinach, New Zealand; Spinach, vine; Malabar spinach, Indian spinach; Swiss chard

LEAFY VEGETABLES - EXCEPT BRASSICA VEGETABLES (Crop Group 4)SOIL
Pest Controlled Product Rate (fl oz/A)
Aphids 10.5- 14.0
Leafhoppers
Whiteflies
Application Restrictions:
26
Application Information:
SIVANTO 400 SL may be applied at the specified dosage by the following methods:
• Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment
• Injection below the eventual seed line prior to planting. Place SIVANTO 400 SL 3-4 inches below seed line
• In-furrow spray at planting
• Potting hole drench at transplanting
• Post-transplant drench following setting and covering
Pre-Harvest Interval (PHI): 21 Day(s)
Do not apply more than 14 fl oz of SIVANTO 400 SL ( 0.365 Pounds Flupyradifurone) per Acre Per Crop Seasonon leafy vegetables, 
regardless of method of application, product or formulation.
Maximum number of crop seasons per year: 3
Cilantro, fresh leaves
Amaranth (leafy amaranth, Chinese spinach, tampala); Arugula (Roquette); Cardoon; Celery; Celery, Chinese; Celtuce; Chervil; 
Chrysanthemum (edible-leaved and garland); Corn salad; Cress, garden; Cress, upland (yellow rocket, winter cress); Dandelion; Dock 
(sorrel); Endive (escarole); Fennel, Florence (finochio); Lettuce (head and leaf); Orach; Parsley; Purslane, garden; Purslane, winter; 
Radicchio (red chicory); Rhubarb; Spinach; Spinach, New Zealand; Spinach, vine; Malabar spinach, Indian spinach; Swiss chard

Crop Group 7 (for animal feed) - Bean; Field pea; Soybean
Pest Controlled Product Rate (fl oz/A)
Aphids 3.5- 7.0
Leafhoppers
Whiteflies 5.5- 7.0
Pest Controlled Product Rate (fl oz/A)
Aphids 3.5- 7.0
5.5- 7.0
Whiteflies
Blueberry maggot 6.0- 7.0
Pest Suppressed Product Rate (fl oz/A)
5.5- 7.0
7.0
Lygus spp.
Application Restrictions:
27
Bearberry; Bilberry; Blueberry, lowbush; Cloudberry; Lingonberry; Muntries; Partridgeberry; Strawberry; cultivars, varieties and/or hybrids 
of these
Blueberry thrips-feeding damage reduction
{Frankliniella vaccinii)
Blueberry thrips 
(Scirtothrips ci tri)
Chilli thrips 
(Scirtothrips dorsalis)
Application Restrictions:
Pre-Harvest Interval (PHI): 7 Day(s) - Forage, Leaves, Vines, Pods, Cutting for Hay, or Seed (fresh or dry, except dry soybean seed);
21 Day(s) - dry soybean seed
Minimum interval between applications: 10 Day(s)
Minimum Application Volume: 10 Gallons/Acre | Ground ; 3 Gallons/Acre | Aerial
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on legume 
vegetables (succulent or dried), regardless of product or formulation.
LOW GROWING BERRY (Crop Subgroup 13-07G) - EXCEPT CRANBERRY 
FOLIAR
LEGUME VEGETABLES - SUCCULENT OR DRIED (Crop Group 6) and FOLIAGE OF LEGUME VEGETABLES - FOR 
ANIMAL FEED (Crop Group 7)
FOLIARCrop Group 6 - Bean (Lupinus spp.) (includes grain lupin, sweet lupin, white lupin, and white sweet lupin); Bean (Phaseolus 
spp.) (includes field bean, kidney bean, lima bean, navy bean, pinto bean, runner bean, snap bean, tepary bean, wax bean); Bean 
(Vigna spp.) (includes adzuki bean, asparagus bean, blackeyed pea, catjang, Chinese longbean, cowpea, Crowder pea, moth bean, 
mung bean, rice bean, southern pea, urd bean, yardlong bean); Broad bean (fava bean); Chickpea (garbanzo bean); Guar; Jackbean; 
Lablab bean (hyacinth bean); Lentil; Pea (Pisum spp.) (includes dwarf pea, edible-pod pea, English pea, field pea, garden pea, green
pea, snow pea, sugar snap pea); Pigeon pea; Soybean; Soybean (immature seed); Sword bean.

Pest Controlled Product Rate (fl oz/A)
Aphids 10.5 - 14.0
Whitefiies
Pest Suppressed Product Rate (fl oz/A)
Lygus spp. 10.5 - 14.0
Pest Controlled Product Rate (fl oz/A)
Aphids 3.5- 7.0
Leafhoppers
Three-cornered alfalfa hopper 5.5- 7.0
Whitefiies
28
Bearberry; Bilberry; Blueberry, lowbush; Cloudberry; Lingonberry; Muntries; Partridgeberry; Strawberry; cultivars, varieties and/or hybrids 
of these
Application Information:
SIVANTO 400 SL may be applied at the specified dosage by the following methods:
• Potting hole drench at transplanting
• Chemigation into root-zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment
Pre-Harvest Interval (PHI): 0 Day(s)
Minimum interval between applications: 10 Day(s)
Minimum Application Volume: 10 Gallons/Acre | Ground ; 3 Gallons/Acre | Aerial
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on low growing 
berry, regardless of method of application, product or formulation.
PEANUT 
FOLIAR
Application Restrictions:
Pre-Harvest Interval (PHI): 7 Day(s)
Minimum interval between applications: 10 Day(s)
Minimum Application Volume: 10 Gallons/Acre | Ground ; 3 Gallons/Acre | Aerial
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on peanut, 
regardless of method of application, product or formulation.
Application Restrictions:
Pre-Harvest Interval (PHI): 1 Day(s)
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Crop Season on low growing 
berry, regardless of method of application, product or formulation.
Maximum number of crop seasons per year: 3
LOW GROWING BERRY (Crop Subgroup 13-07G) - EXCEPT CRANBERRY 
SOIL

Pest Controlled Product Rate (fl oz/A)
Aphids (except woolly apple aphid) 3.5- 7.0
Leafhoppers
Oystershell scale 5.5- 7.0
Pear psylla
Pest Suppressed Product Rate (fl oz/A)
Woolly apple aphids 6.0- 7.0
29
Apple; Azarole; Crabapple; Loquat; Mayhaw; Medlar; Pear; Pear, Asian; Pseudocydonia sinensis (Thouin) C.K. Schneid.; Quince; 
Quince, Chinese; Quince, Japanese; Tejocote; cultivars, varieties and/or hybrids of these
POME FRUITS (Crop Group 11-10) 
FOLIAR
Application Restrictions:
Pre-Harvest Interval (PHI): 14 Day(s)
Minimum interval between applications: 10 Day(s)
Minimum Application Volume: 25 Gallons/Acre | Ground ; 10 Gallons/Acre | Aerial
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on pome fruit, 
regardless of method of application, product or formulation.
Do not apply SIVANTO 400 SL with horticultural oils to pear in late-season or during periods of above average temperatures.
4
San Jose scale
Application Information:
For best results, combine SIVANTO 400 SL with a horticultural oil for pre-bloom applications targeting San Jose scale. 
For suppression only in Idaho, Oregon, and Washington.

Pest Controlled Product Rate (fl oz/A)
Aphids 10.5 - 14.0
Leafhoppers
Pear psylla
Pest Controlled Product Rate (fl oz/A)
Aphids 3.5- 7.0
Leafhoppers
Whiteflies 5.5- 7.0
30
Beet, garden; Burdock, edible; Carrot; Celeriac (celery root); Chervil, turnip-rooted; Chicory; Ginseng; Horseradish; Parsley, turnip- 
rooted; Parsnip; Radish; Radish, oriental (daikon); Rutabaga; Salsify (oyster plant); Salsify, black; Salsify, Spanish; Skirret; Turnip
Apple; Azarole; Crabapple; Loquat; Mayhaw; Medlar; Pear; Pear, Asian; Pseudocydonia sinensis (Thouin) C.K. Schneid.; Quince; 
Quince, Chinese; Quince, Japanese; Tejocote; cultivars, varieties and/or hybrids of these
Application Information:
SIVANTO 400 SL may be applied at the specified dosage by the following methods:
• Chemigation into root-zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment
• At-transplant drench following setting and covering
• Post-transplant drench following setting and covering
• Shank or subsurface side-dress, injected to a depth just above or just within the root zone and between the trunk and drip line of the 
tree canopy. Apply product in a minimum of 10 gallons per acre using multiple shanks on both sides of trees. Ensure product placement 
is below sod or orchard floor debris. Irrigation covering entire treated area should follow within 48 hours to promote uptake by root 
system
POME FRUITS (Crop Group 11-10) 
SOIL
Application Restrictions:
Pre-Harvest Interval (PHI): 30 Day(s)
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on pome fruit, 
regardless of method of application, product or formulation.
Application Restrictions:
Pre-Harvest Interval (PHI): 7 Day(s) 
Minimum interval between applications: 10 Day(s)
Minimum Application Volume: 10 Gallons/Acre | Ground ; 3 Gallons/Acre | Aerial
Do not apply more than 14 fl oz of SIVANTO 400 SL ( 0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on root 
vegetables, regardless of method of application, product or formulation.
Do not harvest the tops (leaves) from any crop listed under Crop Subgroup IB, except turnip greens and kava leaves, for human or 
livestock consumption.
ROOT VEGETABLES - EXCEPT SUGARBEET (Subgroup IB) 
FOLIAR

Amur river grape; Gooseberry; Grape; Kiwifruit, hardy; Maypop; Schisandra berry; cultivars, varieties and/or hybrids of these
Pest Controlled Product Rate (fl oz/A)
Leafhoppers 3.5- 7,0
Sharpshooters
Vine mealybug 6.0- 7.0
SMALL FRUIT VINE CLIMBING - EXCEPT FUZZY KIWIFRUIT (Crop Subgroup 13-07F)SOIL
Amur river grape; Gooseberry; Grape; Kiwifruit, hardy; Maypop; Schisandra berry; cultivars, varieties and/or hybrids of these
Pest Controlled Product Rate (fl oz/A)
Leafhoppers 10.5- 14.0
Sharpshooters
Vine mealybug
31
Application Information:
SIVANTO 400 SL may be applied at the specified dosage by the following methods:
• Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment
• Basal drench in sufficient water to move SIVANTO 400 SL into root zone
SMALL FRUIT VINE CLIMBING - EXCEPT FUZZY KIWIFRUIT (Crop Subgroup 13-07F) 
FOLIAR
Application Restrictions:
Pre-Harvest Interval (PHI): 0 Day(s) 
Minimum interval between applications: 10 Day(s)
Minimum Application Volume: 25 Gallons/Acre | Ground ; 10 Gallons/Acre | Aerial
Do not apply more than 14 fl oz of SIVANTO 400 SL ( 0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on small fruit vine 
climbing, regardless of method of application, product or formulation.
Application Restrictions:
Pre-Harvest Interval (PHI): 30 Day(s)
Do not apply more than 14 fl oz of SIVANTO 400 SL ( 0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on small fruit vine 
climbing, regardless of method of application, product or formulation.

Pest Controlled Product Rate (fl oz/A)
Aphids 5.0 - 14.0
Pest Controlled Product Rate (fl oz/A)
Aphids 3.5- 7.0
5.5- 7.0
32
Apricot; Apricot, Japanese; Capulin; Cherry, black; Cherry, Nanking; Cherry, sweet; Cherry, tart; Jujube, Chinese; Nectarine; Peach; 
Plum; Plum, American; Plum, beach; Plum, Canada; Plum, cherry; Plum, Chickasaw; Plum, Damson; Plum, Japanese; Plum, Klamath; 
Plum, prune; Plumcot; Sloe; cultivars, varieties and/or hybrids of these
Application Information:
SIVANTO 400 SL may be applied at the specified dosage by the following methods:
• Injection below the eventual seed row prior to planting. Place SIVANTO 400 SL 3 - 4 inches below seed-line
• In-furrow spray during planting
• Chemigation into root-zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment
• Subsurface side-dress shanked into the root zone on both sides of the plants
• Surface side-dress followed by irrigation, a rain event or mechanically incorporated
STONE FRUITS (Crop Group 12-12) 
FOLIAR
Application Restrictions:
Pre-Harvest Interval (PHI): 45 Day(s)
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on Sorghum, 
regardless of method of application, product or formulation.
Maximum number of crop seasons per year: 1
Application Restrictions:
Pre-Harvest Interval (PHI): 14 Day(s)
Minimum interval between applications: 10 Day(s)
Minimum Application Volume: 25 Gallons/Acre | Ground ; 10 Gallons/Acre | Aerial
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on stone fruit, 
regardless of method of application, product or formulation.
SORGHUM
SOIL - Including production for seed
4
San Jose scale
Application Information:
For best results, combine SIVANTO 400 SL with a horticultural oil for pre-bloom applications targeting San Jose scale. 
4
For suppression only in Idaho, Oregon, and Washington.

Pest Controlled Product Rate (fl oz/A)
Aphids 10.5 - 14.0
Pest Controlled Product Rate (fl oz/A)
Leafhoppers 3.5- 7.0
Aphids 5.5- 7.0
Whitefiies
33
Apricot; Apricot, Japanese; Capulin; Cherry, black; Cherry, Nanking; Cherry, sweet; Cherry, tart; Jujube, Chinese; Nectarine; Peach; 
Plum; Plum, American; Plum, beach; Plum, Canada; Plum, cherry; Plum, Chickasaw; Plum, Damson; Plum, Japanese; Plum, Klamath; 
Plum, prune; Plumcot; Sloe; cultivars, varieties and/or hybrids of these
Application Information:
SIVANTO 400 SL may be applied at the specified dosage by the following methods:
• Chemigation into root-zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment
• Post-transplant drench following setting and covering
• Shank or subsurface side-dress, injected to a depth just above or just within the root zone and between the trunk and drip line of the 
tree canopy. Apply product in a minimum of 10 gallons per acre using multiple shanks on both sides of trees. Ensure product placement 
is below sod or orchard floor debris. Irrigation covering entire treated area should follow within 48 hours to promote uptake by root 
system
STONE FRUITS (Crop Group 12-12) 
SOIL
Application Restrictions:
Pre-Harvest Interval (PHI): 30 Day(s)
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on stone fruit, 
regardless of method of application, product or formulation.
Application Restrictions:
Pre-Harvest Interval (PHI): 1 Day(s)
Minimum interval between applications: 7 Day(s)
Minimum Application Volume: 10 Gallons/Acre | Ground ; 3 Gallons/Acre | Aerial
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Crop Season on taro leaves, 
regardless of method of application, product or formulation.
Maximum number of crop seasons per year: 3
TARO LEAVES
FOLIAR

Pest Controlled Product Rate (fl oz/A)
Aphids 10.5- 14.0
Leafhoppers
Whitefiies
Pest Controlled Product Rate (fl oz/A)
Aphids 3.5- 7.0
Whitefiies 5.5- 7.0
34
Application Information:
SIVANTO 400 SL may be applied at the specified dosage by the following methods:
• Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment
• Injection below the eventual seed line prior to planting. Place SIVANTO 400 SL 3-4 inches below seed line
• Potting hole drench at transplanting
• Post-transplant drench following setting and covering
TREE NUTS (Crop Group 14-12) - EXCEPT ALMOND 
FOLIAR
African nut-tree; Beech nut; Brazil nut; Brazilian pine; Bunya; Bur oak; Butternut; Cajou nut; Candlenut; Cashew; Chestnut; Chinquapin; 
Coconut; Coquito nut; Dika nut; Ginkgo; Guiana chestnut; Hazelnut (Filbert); Heartnut; Hickory nut; Japanese horse-chestnut; 
Macadamia nut; Mongongo nut; Monkey puzzle nut; Monkey-pot; Okari nut; Pachira nut; Peach palm nut; Pecan; Pequi; Pili nut; Pine 
nut; Pistachio; Sapucaia nut; Tropical almond; Walnut, black; Walnut, English; Yellowhorn; cultivars, varieties and/or hybrids of these
Application Restrictions:
Pre-Harvest Interval (PHI): 7 Day(s)
Minimum interval between applications: 14 Day(s)
Minimum Application Volume: 25 Gallons/Acre | Ground ; 10 Gallons/Acre | Aerial
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on tree nut, 
regardless of method of application, product or formulation.
Application Restrictions:
Pre-Harvest Interval (PHI): 21 Day(s)
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Crop Season on taro leaves, 
regardless of method of application, product or formulation.
Maximum number of crop seasons per year: 3
TARO LEAVES 
SOIL

Pest Controlled Product Rate (fl oz/A)
Aphids 10.5 - 14.0
Pest Controlled Product Rate (fl oz/A)
Aphids 5.5- 7.0
Whitefiies
Pest Suppressed Product Rate (fl oz/A)
5.5- 7.0
35
Avocado thrips 
(Sciriothrips perseae)
Abiu ; Akee apple; Avocado; Avocado. Guatemalan; Avocado, Mexican ; Avocado, West Indian; Bacury ; Banana; Banana, dwarf; Binjai 
; Canistel; Cupuacu ; Etambe; Jatoba; Kei apple; Langsat; Lanjut; Lucuma ; Mabolo; Mango; Mango, horse ; Mango, Saipan ; 
Mangosteen; Paho; Papaya; Pawpaw, common ; Pelipisan ; Pequi; Pequia; Persimmon, American; Plantain; Pomegranate; Poshte; 
Quandong; Sapote, black; Sapote, green; Sapote, white ; Sataw; Screw-pine; Star apple ; Tamarind-of-the-lndies ; Wild loquat; cultivars, 
varieties and/or hybrids of these
African nut-tree; Beech nut; Brazil nut; Brazilian pine; Bunya; Bur oak; Butternut; Cajou nut; Candlenut; Cashew; Chestnut; Chinquapin; 
Coconut; Coquito nut; Dika nut; Ginkgo; Guiana chestnut; Hazelnut (Filbert); Heartnut; Hickory nut; Japanese horse-chestnut; 
Macadamia nut; Mongongo nut; Monkey puzzle nut; Monkey-pot; Okari nut; Pachira nut; Peach palm nut; Pecan; Pequi; Pili nut; Pine 
nut; Pistachio; Sapucaia nut; Tropical almond; Walnut, black; Walnut, English; Yellowhorn; cultivars, varieties and/or hybrids of these
TREE NUTS (Crop Group 14-12) - EXCEPT ALMOND 
SOIL
TROPICAL AND SUBTROPICAL, MEDIUM TO LARGE FRUIT, SMOOTH, INEDIBLE PEEL (Crop Subgroup 24B) 
FOLIAR
Application Restrictions: 
Pre-Harvest Interval (PHI): 0 Day(s) (Pomegranate)
Pre-Harvest Interval (PHI): 1 Day(s) (Other listed crops)
Minimum interval between applications: 7 Day(s) (Pomegranate)
Minimum interval between applications: 14 Day(s) (Other listed crops)
Minimum Application Volume: 25 Gallons/Acre | Ground ; 10 Gallons/Acre ] Aerial
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on tropical and 
subtropical, medium to large fruit, smooth, inedible peel, regardless of method of application, product or formulation.
Application Restrictions:
Pre-Harvest Interval (PHI): 30 Day(s)
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on tree nut, 
regardless of method of application, product or formulation.
Application Information:
SIVANTO 400 SL may be applied at the specified dosage by the following methods:
• Chemigation into root-zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment
• At-transplant drench following setting and covering
• Post-transplant drench following setting and covering
• Shank or subsurface side-dress, injected to a depth just above or just within the root zone and between the trunk and drip line of the 
tree canopy. Apply product in a minimum of 10 gallons per acre using multiple shanks on both sides of trees. Ensure product placement 
is below sod or orchard floor debris. Irrigation covering entire treated area should follow within 48 hours to promote uptake by root 
system

Pest Controlled Product Rate (fl oz/A)
Aphids (except green peach aphid) 3.5- 7.0
Leafhoppers
Colorado potato beetle 5.5- 7.0
Green peach aphid
Potato psyllid
Whiteflies
1
Pest Controlled Product Rate (fl oz/A)
Aphids (except green peach aphid) 10.5 - 14.0
Colorado potato beetle 14.0
Green peach aphid
Whiteflies
36
Application Information:
Application timing; Prior to stem emergence
Application for all listed pests should be made early crop season
SIVANTO 400 SL may be applied at the specified dosage by the following methods:
• Injection below the eventual seed row prior to planting. Place SIVANTO 400 SL 3 - 4 inches below seed-line
• Drench at transplanting
TUBEROUS AND CORM VEGETABLES (Crop Subgroup 1C) 
FOLIAR
TUBEROUS AND CORM VEGETABLES (Crop Subgroup 1C) 
SOIL
Application Restrictions:
Pre-Harvest Interval (PHI): 7 Day(s) 
Minimum interval between applications: 7 Day(s)
Minimum Application Volume: 10 Gallons/Acre | Ground ; 3 Gallons/Acre | Aerial
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Flupyradifurone) per Acre Per Calendar Year on tuberous and 
corm vegetables, regardless of method of application, product or formulation.
Arracacha; Arrowroot; Artichoke, Chinese; Artichoke, Jerusalem; Canna, edible (Queensland arrowroot); Cassava (bitter and sweet); 
1 2Chayote (root) ; Chufa; Dasheen (taro); Ginger; Leren; Potato ; Sweet potato; Tanier (cocoyam); Turmeric; Yam bean (jicama, manoic 
pea); Yam, true
Application Information:
See cucurbit vegetables Crop Group 9 for Chayote (fruit). 
9
For optimum control of potato psyllid, use of MSO adjuvant or similar is recommended.
Arracacha; Arrowroot; Artichoke, Chinese; Artichoke, Jerusalem; Canna, edible (Queensland arrowroot); Cassava (bitter and sweet); 
Chayote (root)^; Chufa; Dasheen (taro); Ginger; Leren; Potato; Sweet potato; Tanier (cocoyam); Turmeric; Yam bean (jicama, manoic 
pea); Yam, true

1 See cucurbit vegetables Crop Group 9 for Chayote (fruit).
Pest Controlled Product Rate (fl oz/A)
Aphids (except green peach aphid) 3.5- 7.0
Leafhoppers
Green peach aphid 5.5- 7.0
Whiteflies
Pest Controlled Product Rate (fl oz/A)
Aphids 10.5- 14.0
Leafhoppers
Whiteflies
37
• In-furrow spray during planting
• Chemigation into root-zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment, or overhead via center pivot, 
solid set. linear move or side roll irrigation equipment
• Post-transplant drench following setting and covering
Application Information:
SIVANTO 400 SL may be applied at the specified dosage by the following methods:
• Chemigation into root zone through low-pressure drip, trickle, micro-sprinkler or equivalent equipment
• Injection below the eventual seed line prior to planting. Place SIVANTO 400 SL 3 - 4 inches below seed line
• In-furrow spray during planting
• Potting hole drench at transplanting
• Post-transplant drench following setting and covering
TURNIP GREENS 
FOLIAR
TURNIP GREENS 
SOIL
Application Restrictions:
Pre-Harvest Interval (PHI): 21 Day(s)
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Fiupyradifurone) per Acre Per Crop Season on turnip greens.
Application Restrictions:
Pre-Harvest Interval (PHI): 1 Day(s)
Minimum interval between applications: 7 Day(s)
Minimum Application Volume: 10 Gallons/Acre | Ground ; 3 Gallons/Acre | Aerial 
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Fiupyradifurone) per Acre Per Crop Season on turnip greens, 
regardless of method of application, product or formulation.
Maximum number of crop seasons per year: 3
Application Restrictions:
Do not apply more than 14 fl oz of SIVANTO 400 SL (0.365 Pounds Fiupyradifurone) per Acre Per Calendar Year on tuberous and 
corm vegetables, regardless of method of application, product or formulation.
Maximum number of crop seasons per year: 1

38
regardless of method of application, product or formulation.
Maximum number of crop seasons per year: 3

STORAGE AND DISPOSAL
Do not contaminate water, food, or feed by storage or disposal.
CONTAINER HANDLING
[Non-Refillable Containers]
Once container is rinsed, offer for recycling if available or puncture and dispose of in a sanitary landfill or by incineration.
Once container is rinsed, offer for recycling if available or puncture and dispose of in a sanitary landfill or by incineration.
Non-Rigid, Non-refillable Containers
39
Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds 
after the flow begins to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later use or 
disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10 
seconds after the flow begins to drip.
Top Discharge IBC, Drums, Kegs (e.g.- Snyder 120 Next Gen, Bonar B120, Drums, and Kegs)
Triple rinsing the container before final disposal is the responsibility of the person disposing of the container. To triple rinse the container 
before final disposal, empty the remaining contents from this container into application equipment or mix tank. Fill the container at least
10 percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Rinse all interior surfaces. Pour or pump 
rinsate into application equipment or rinsate collection system. Repeat this procedure two more times.
Rigid Non-refillable Containers that are too large to shake (i.e., with capacities greater than 5 gallons or 50 lbs) 
Non-refillable container. Do not reuse or refill this container. Refer to Bottom Discharge IBC or Top Discharge IBC, Drums, Kegs 
information as follows.
Non-Refillable Fiber Drums with Liners
Non-refillable container. Do not reuse or refill this container. Completely empty liner by shaking and tapping sides and bottom to loosen 
clinging particles. Empty residue into application equipment, then offer for recycling if available or dispose of in a sanitary landfill or by 
incineration. If drum is contaminated and cannot be reused, dispose of it in the manner required for its liner.
Rigid, Non-refillable containers (equal to or less than 5 gallons)
Non-refillable container. Do not reuse or refill this container. Triple rinse or pressure rinse container (or equivalent) promptly after 
emptying. Triple rinse as follows; Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after 
the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a 
mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more 
times.
Bottom Discharge IBC (e.g. - Schuetz Caged IBC or Snyder Square Stackable)
Pressure rinsing the container before final disposal is the responsibility of the person disposing of the container. To pressure rinse the 
container before final disposal, empty the remaining contents from the IBC into application equipment or mix tank. Raise the bottom of 
the IBC by 1.5 inches on the side which is opposite of the bottom discharge valve to promote more complete product removal. 
Completely remove the top lid of the IBC. Use water pressurized to at least 40 PSI to rinse all interior portions. Continuously pump or 
drain rinsate into application equipment or rinsate collection system while pressure rinsing. Continue pressure rinsing for 2 minutes or 
until rinsate becomes clear. Replace the lid and close bottom valve.
Top Discharge IBC, Drums, Kegs (e.g.-Snyder 120 Next Gen, Bonar B120, Drums, Kegs)
Triple rinsing the container before final disposal is the responsibility of the person disposing of the container. To triple rinse the container 
before final disposal, empty the remaining contents from this container into application equipment or mix tank. Fill the container at least
10 percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Rinse all interior surfaces. Pour or pump 
rinsate into application equipment or rinsate collection system. Repeat this procedure two more times.
PESTICIDE DISPOSAL
To avoid wastes, use all material in this container by application according to label directions. If wastes cannot be avoided, offer 
remaining product to a waste facility or pesticide disposal program (often such programs are run by state or local governments or by 
industry).
PESTICIDE STORAGE
Store in original container away from feed and food. Store in cool, dry area. Do not store in direct sunlight. Do not allow prolonged 
storage in temperatures that exceed lOSDF (40DC) or in temperatures that fall below 14nF (-lOnC).

[Refillable Containers]
Once container is rinsed, offer for recycling if available or puncture and dispose of in a sanitary landfill or by incineration.
[Note to EPA: Lot Number will appear on container or label of every product.]
SIVANTO® 400 SL 09/04/2019
40
Refillable container. Refer to Bottom Discharge IBC or Top Discharge IBC, Drums, Kegs information as follows. Refill this container with 
pesticide only. Do not reuse this container for any other purpose. Contact your Ag retailer or Bayer CropScience for container return, 
disposal and recycling information.
Nonrefillable container. Do not reuse or refill this container. Completely empty container into application equipment. Then offer for 
recycling if available or dispose of in a sanitary landfill or by other procedures approved by state and local authorities.”
End users are authorized to remove tamper-evident cables as required to remove the product from the container unless the container is 
equipped with one-way valves and refilling or returning is planned. If this is the case, end-users are not authorized to remove tamper- 
evident cables, remove one-way valves, or clean container.
Bottom Discharge IBC (e.g. - Schuetz Caged IBC or Snyder Square Stackable)
Pressure rinsing the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling 
is the responsibility of the refiller. To pressure rinse the container before final disposal, empty the remaining contents from the IBC into 
application equipment or mix tank. Raise the bottom of the IBC by 1.5 inches on the side which is opposite of the bottom discharge valve 
to promote more complete product removal. Completely remove the top lid of the IBC. Use water pressurized to at least 40 PSI to rinse 
all interior portions. Continuously pump or drain rinsate into application equipment or rinsate collection system while pressure rinsing. 
Continue pressure rinsing for 2 minutes or until rinsate becomes clear. Replace the lid and close bottom valve.
Top Discharge IBC, Drums, Kegs (e.g.-Snyder 120 Next Gen, Bonar B120, Drums, Kegs)
Triple rinsing the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is 
the responsibility of the refiller. To triple rinse the containers before final disposal, empty the remaining contents from this container into 
application equipment or mix tank. Fill the container at least 10 percent full with water. Agitate vigorously or recirculate water with the 
pump for 2 minutes. Rinse all interior surfaces. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this 
procedure two more times.