crop-chem-docs/corpus/epa_ppls/100-1093.md

HERITAGE FUNGICIDE

• EPA Reg No: 100-1093
• Registrant: SYNGENTA CROP PROTECTION, LLC
• Signal word: Caution
• Active ingredients: Azoxystrobin (50%)
• Label accepted: 2025-07-28
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000100-01093-20250728.pdf

---

July 28, 2025 Monique Inforzato Monique.Inforzato@syngenta.com SYNGENTA CROP PROTECTION, LLC Subject: Non-PRIA (Pesticide Registration Improvement Act) Labeling Amendment - Revise label and add azoxystrobin registration review Product Name: HERITAGE FUNGICIDE Admin Number: 100-1093 EPA Receipt Date: 11/10/2017 Action Case Number: 00605744 Dear Monique Inforzato: The amended labeling referred to above, submitted in connection with registration under the Federal Insecticide, Fungicide, and Rodenticide Act, as amended, is acceptable. This approval does not affect any terms or conditions that were previously imposed on this registration. You continue to be subject to existing terms or conditions on your registration and any deadlines connected with them. A stamped copy of your labeling is enclosed for your records. This labeling supersedes all previously accepted labeling. You must submit one (1) copy of the final printed labeling before you release this product for shipment with the new labeling. In accordance with 40 CFR § 152.130(c), you may distribute or sell this product under the previously approved labeling for 18 months from the date of this letter. After 18 months, you may only distribute or sell this product if it bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR § 152.3. Should you wish to add/retain a reference to your company’s website on your label, then please be aware that the website becomes labeling under FIFRA and is subject to review by EPA. If the website is false or misleading, the product will be considered to be misbranded and sale or distribution of the product is unlawful under FIFRA section 12(a)(1)(E). 40 CFR § 156.10(a)(5) lists examples of statements the EPA may consider false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims made on the website may not substantially differ from those claims approved through the registration process. Therefore, should the EPA find or if it is brought to our attention that a website contains statements or claims substantially differing from statements or claims made in connection with obtaining a FIFRA section 3 registration, the website will be referred to the EPA’s Office of Enforcement and Compliance Assurance. Your release for shipment of this product constitutes acceptance of these terms. If these terms are not complied with, this registration will be subject to cancellation in accordance with FIFRA section 6.

If you have questions, please contact Elizabeth Andrews via email at andrews.elizabeth@epa.gov. Sincerely, Kable Bo Davis, Senior Advisor FB, RD Office of Pesticide Programs Kable Bo Davis

Heritage Fungicide Page 1 [MASTER]

AZOXYSTROBIN GROUP 11 FUNGICIDE

Heritage ® Fungicide

Broad-spectrum fungicide for the prevention and control of diseases of turf and ornamentals, and fruit and nut trees, and vegetable and herb plants for retail sale to consumers.

Active Ingredient: Azoxystrobin: methyl (E)-2-{2-[6-(2-cyanophenoxy) pyrimidin-4-yloxy]phenyl}-3-methoxyacrylate* ................................................. 50% Other Ingredients: ........................................................................................... 50% Total: ............................................................................................................. 100%

Heritage Fungicide is a water-dispersible granule (WG) containing 0.5 lb azoxystrobin per lb product. *IUPAC

KEEP OUT OF REACH OF CHILDREN.

CAUTION

See additional precautionary statements and directions for use inside booklet.

Reformulation is prohibited. See individual container labels for repackaging limitations.

EPA Reg No. 100-1093

EPA Est.

---

Net Contents

07/28/2025 100-1093

Heritage Fungicide Page 2 FIRST AID If on skin or clothing • Take off contaminated clothing. • Rinse skin immediately with plenty of water for 15-20 minutes. • Call a poison control center or doctor for treatment advice. If in eyes • Hold eye open and rinse slowly and gently with water for 15-20 minutes. • Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. • Call a poison control center or doctor for treatment advice. Have the product container or label with you when calling a poison control center or doctor, or going for treatment. SYNGENTA HOTLINE NUMBER For 24-Hour Medical Emergency Assistance (Human or Animal) or Chemical Emergency Assistance (Spill, Leak, Fire, or Accident), Call 1-800-888-8372

PRECAUTIONARY STATEMENTS

Hazards to Humans and Domestic Animals

CAUTION

HARMFUL IF ABSORBED THROUGH SKIN. CAUSES MODERATE EYE IRRITATION. Avoid contact with skin, eyes or clothing. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet. Remove and wash contaminated clothing before reuse.

Personal Protective Equipment (PPE)

Applicators and other handlers must wear:

• Long-sleeved shirt and long pants • Chemical-resistant gloves made of polyvinyl chloride, nitrile rubber or butyl rubber • Shoes plus socks

Heritage Fungicide Page 3 In addition, • Mixers/loaders supporting aerial or chemigation applications must wear a minimum of a NIOSH-approved particulate filtering facepiece respirator with any N, R, or P filter; OR a NIOSH-approved elastomeric particulate respirator with any N, R, or P filter; OR a NIOSH-approved powered air purifying respirator with HE filters.

• Mixers/loaders supporting groundboom applications must wear a minimum of a NIOSH-approved particulate filtering facepiece respirator with any N, R, or P filter; OR a NIOSH-approved elastomeric particulate respirator with any N, R, or P filter; OR a NIOSH-approved powered air purifying respirator with HE filters.

• Mixers/loaders/applicators using mechanically pressurized handwands, except when applying to Christmas tree farms, nursery ornamentals, landscaping, must wear a minimum of a NIOSH-approved particulate filtering facepiece respirator with any N, R, or P filter; OR a NIOSH-approved elastomeric particulate respirator with any N, R, or P filter; OR a NIOSH-approved powered air purifying respirator with HE filters

Respirator fit testing, medical qualification, and training Using a program that conforms to OSHA’s requirements (see 29 CFR Part 1910.134), employers must verify that any handler who uses a respirator is: • Fit-tested and fit-checked, • Trained, and • Examined by a qualified medical practitioner to ensure physical ability to safely wear the style of respirator to be worn. A qualified medical practitioner is a physician or other licensed health care professional who will evaluate the ability of a worker to wear a respirator. The initial evaluation consists of a questionnaire that asks about medical conditions (such as a heart condition) that would be problematic for respirator use. If concerns are identified, then additional evaluations, such as a physical exam, might be necessary. The initial evaluation must be done before respirator use begins. Handlers must be reexamined by a qualified medical practitioner if their health status or respirator style or use- conditions change.

Upon request by local/state/federal/tribal enforcement personnel, employers must provide documentation demonstrating how they have complied with these requirements.

User Safety Requirements

Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry.

Engineering Controls

Heritage Fungicide Page 4 When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides (40 CFR 170.240 (d)(4-6), the handler PPE requirements may be reduced or modified as specified in the WPS. Human flagging is prohibited.

IMPORTANT: When reduced PPE is worn because a closed system is being used, handlers must be provided all PPE specified above for “applicators and other handlers” and have such PPE immediately available for use in an emergency, such as a spill or equipment breakdown.

User Safety Recommendations Users should: • Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. Wash thoroughly with soap and water after handling. • Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. • Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing.

Environmental Hazards

This pesticide is toxic to freshwater and estuarine/marine fish and aquatic invertebrates. Azoxystrobin can be persistent for several months or longer. Do not apply directly to water, or to areas where surface water is present, or to intertidal areas below the mean high-water mark. Drift and runoff may be hazardous to aquatic organisms in neighboring areas. Do not contaminate water when disposing of equipment wash water or rinsate.

Groundwater Advisory

Azoxystrobin and a degradate of azoxystrobin are known to leach through soil to groundwater under certain conditions as a result of label use. This chemical may leach into groundwater if used in areas where soils are permeable, particularly where the water table is shallow.

Heritage Fungicide Page 5 Surface Water Advisory

This product may impact surface water quality due to run-off of rain water. This is especially true for poorly draining soils and soils with shallow groundwater. This product is classified as having a high potential for reaching surface water via run-off for several months or more after application. A level, well-maintained vegetative buffer strip between areas to which this product is applied and surface water features, such as ponds, streams and springs, will reduce the potential loading of azoxystrobin and a degradate of azoxystrobin from run-off water and sediment. Run-off of this product also will be reduced by avoiding applications when rainfall or irrigation is expected to occur within 48 hours.

Notify state and/or Federal authorities and Syngenta immediately if you observe any adverse environmental effects due to use of this product.

Heritage Fungicide Page 6 CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY

NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation of Warranty and Liability before buying or using this product. If the terms are not acceptable, return the product at once, unopened, and the purchase price will be refunded.

The Directions for Use of this product must be followed carefully. It is impossible to eliminate all risks inherently associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences may result because of such factors as manner of use or application, weather or crop conditions, presence of other materials or other influencing factors in the use of the product, which are beyond the control of SYNGENTA CROP PROTECTION, LLC or Seller. To the extent permitted by applicable law, Buyer and User agree to hold SYNGENTA and Seller harmless for any claims relating to such factors.

SYNGENTA warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes stated in the Directions for Use, subject to the inherent risks referred to above, when used in accordance with directions under normal use conditions. To the extent permitted by applicable law: (1) this warranty does not extend to the use of the product contrary to label instructions or under conditions not reasonably foreseeable to or beyond the control of Seller or SYNGENTA, and (2) Buyer and User assume the risk of any such use. TO THE EXTENT PERMITTED BY APPLICABLE LAW, SYNGENTA MAKES NO WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR IMPLIED WARRANTY EXCEPT AS WARRANTED BY THIS LABEL.

To the extent permitted by applicable law, in no event shall SYNGENTA be liable for any incidental, consequential or special damages resulting from the use or handling of this product. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY OF SYNGENTA AND SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES (INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SHALL BE THE RETURN OF THE PURCHASE PRICE OF THE PRODUCT OR, AT THE ELECTION OF SYNGENTA OR SELLER, THE REPLACEMENT OF THE PRODUCT.

SYNGENTA and Seller offer this product, and Buyer and User accept it, subject to the foregoing Conditions of Sale and Limitation of Warranty and Liability, which may not be modified except by written agreement signed by a duly authorized representative of SYNGENTA.

Heritage Fungicide Page 7 DIRECTIONS FOR USE

It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.

FAILURE TO FOLLOW THE USE DIRECTIONS AND PRECAUTIONS ON THIS LABEL MAY RESULT IN PLANT INJURY OR POOR DISEASE CONTROL.

DO NOT apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation.

AGRICULTURAL USES

Use to prevent and control diseases of: turf produced on sod farms; and ornamentals, fruit and nut trees, and vegetable and herb plants grown for retail sale to consumers.

AGRICULTURAL USE REQUIREMENTS

Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE), notification to workers, and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard.

Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 4 hours.

PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil or water is: • Coveralls • Chemical-resistant gloves made of polyvinyl chloride, nitrile rubber or butyl rubber • Shoes plus socks

Heritage Fungicide Page 8 NON-AGRICULTURAL USES

Use to prevent and control diseases of turf and ornamentals on golf courses, lawns and landscape areas around residential, institutional, public, commercial and industrial buildings, parks, recreational areas and athletic fields.

NON-AGRICULTURAL USE REQUIREMENTS

The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce agricultural plants on farms, forests, nurseries, or greenhouses. The area being treated must be vacated by unprotected persons.

Do not treat areas while unprotected humans or domestic animals are present in the treatment areas. Because certain states may require more restrictive reentry intervals, consult your State Department of Agriculture for further information.

Do not allow entry into treatment area until area that was treated with Heritage Fungicide is dry.

PRODUCT INFORMATION

Heritage Fungicide is a broad-spectrum, systemic fungicide that prevents or controls the listed pathogens that cause foliar, stem, and root diseases, including leaf and stem blights, leaf spots, patch diseases, mildews, anthracnose, fairy rings, molds, and rusts of turfgrass, ornamentals, vegetables, and herbs. Heritage Fungicide may be applied in alternating application programs or in tank mixes with other registered plant protection products. All applications must be made according to the use directions that follow.

Heritage Fungicide is a member of Syngenta’s Plant Performance™ product line that can improve plant vigor and quality. The additional benefits are due to positive effects on plant physiology, which can vary according to plant species and growing environment.

USE RESTRICTIONS

DO NOT apply more than 10 lb of Heritage Fungicide (5 lb ai) per acre per year to crops grown outdoors.

DO NOT apply more than 1.1 lb of Heritage Fungicide (0.55 lb ai) per acre per application.

DO NOT graze or feed clippings from treated turf areas to animals.

Heritage Fungicide Page 9 PHYTOTOXICITY

Heritage Fungicide is highly phytotoxic to apple and certain crabapple and flowering cherry varieties. Use caution to prevent injury to these trees.

DO NOT use spray equipment that has been used to apply Heritage Fungicide to spray apple, crabapple or flowering cherry trees. Even trace amounts can cause unacceptable phytotoxicity in certain varieties.

DO NOT apply Heritage Fungicide where spray drift may reach apple, crabapple, or flowering cherry trees.

DO NOT apply when weather conditions favor drift from treated areas to a non-target aquatic habitat.

SPRAY DRIFT MANAGEMENT

SPRAY DRIFT

Aerial Applications: • Do not release spray at a height greater than 10 ft above the ground or crop canopy, unless a greater application height is necessary for pilot safety. • Applicators are required to select nozzles that deliver Medium to coarse spray droplets in accordance with ASABE Standard S-572.1. • Do not apply when wind speeds exceed 15 mph at the application site. If the windspeed is greater than 10 mph, the boom length must be 65% or less of the wingspan for fixed wing aircraft and 75% or less of the rotor diameter for helicopters. Otherwise, the boom length must be 75% or less of the wingspan for fixed-wing aircraft and 90% or less of the rotor diameter for helicopters. • Applicators must use ½ swath displacement upwind at the downwind edge of the field. • Do not apply during temperature inversions.

Groundboom Applications: • User must only apply with the release height recommended by the manufacturer, but no more than 4 ft above the ground or crop canopy. • Applicators are required to use a medium or coarser droplet size (ASABE S572.1). • Do not apply when wind speeds exceed 15 mph at the application site. • Do not apply during temperature inversions.

Heritage Fungicide Page 10 SPRAY DRIFT ADVISORIES

THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT. BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS.

IMPORTANCE OF DROPLET SIZE An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide target pest control. While applying larger droplets will reduce spray drift, the potential for drift will be greater if applications are made improperly or under favorable environmental conditions.

Controlling Droplet Size – Ground Boom • Volume – Increasing the spray volume so that larger droplets are produced will reduce spray drift. Use the highest practical spray volume for the application. If greater spray volume is needed, consider using a nozzle with a higher flow rate. • Pressure – Use the lowest spray pressure recommended for the nozzle to produce the target spray volume and droplet size. • Spray Nozzle – Use a spray nozzle that is designed for the intended application. Consider using nozzles designed to reduce drift.

Controlling Droplet Size – Aircraft • Adjust Nozzles – Follow nozzle manufacturers’ recommendations for setting up nozzles. Generally, to reduce fine droplets, nozzles should be oriented parallel with the airflow in flight.

BOOM HEIGHT – Ground Boom For ground equipment, the boom should remain level with the crop and have minimal bounce.

RELEASE HEIGHT – Aircraft Higher release heights increase the potential for spray drift.

SHIELDED SPRAYERS Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify that the shields are not interfering with the uniform deposition of the spray on the target area.

TEMPERATURE AND HUMIDITY When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation.

TEMPERATURE INVERSIONS Drift potential is high during a temperature inversion. Temperature inversions are characterized by increasing temperature with altitude and are common on nights with limited cloud cover and light to now wind. The presence of an inversion can be

Heritage Fungicide Page 11 indicated by ground fog or by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing. Avoid applications during temperature inversions.

WIND Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND CONDITIONS. Applicators need to be familiar with local wind patterns and terrain that could affect spray drift.

AVOIDING SPRAY DRIFT IS THE RESPONSIBILITY OF THE APPLICATOR.

INTEGRATED PEST (DISEASE) MANAGEMENT (IPM)

Heritage Fungicide should be integrated into an overall disease and pest management strategy whenever the use of a fungicide is required. Cultural practices known to reduce disease development, such as planting of resistant cultivars, removal of plant debris to reduce inoculum, and water management, should be followed. The following sections in this label identify specific IPM recommendations for each crop. Consult your local agricultural, turf and ornamental authorities for additional IPM strategies established for your area. Heritage Fungicide may be used in State Agricultural Extension advisory (disease forecasting) programs that recommend application timing based on environmental factors favorable for disease development.

Heritage Fungicide Page 12 RESISTANCE MANAGEMENT

For resistance management, Heritage Fungicide contains a Group 11/[azoxystrobin] fungicide. Any fungal population may contain individuals naturally resistant to Heritage Fungicide and other Group 11 fungicides. A gradual or total loss of pest control may occur over time if these fungicides are used repeatedly in the same fields. Appropriate resistance management strategies should be followed.

To delay fungicide resistance, take one or more of the following steps:

• Rotate the use of Heritage Fungicide or other Group 11 fungicides within a growing season sequence with different groups that control the same pathogens. • Use tank mixtures with fungicides from a different group that are equally effective on the target pest when such use is permitted. Use at least the minimum application rate as labeled by the manufacturer. • Adopt an integrated disease management program for fungicide use that includes scouting, uses historical information related to pesticide use, and which considers host plant resistance, impact of environmental conditions on disease development, disease thresholds, as well as cultural, biological and other chemical control practices. • Where possible, make use of predictive disease models to effectively time fungicide applications. Note that using predictive models alone is not sufficient to manage resistance. • Monitor treated fungal populations for resistance development. • Contact your local Syngenta Representative, retailer, or extension specialist for any additional pesticide resistance-management and/or IPM recommendations for specific crops and pathogens. • For further information or to report suspected resistance contact Syngenta at 1-866- Syngent(a) (866-796-4368). You can also contact your pesticide distributor or university extension specialist to report resistance.

Since pathogens differ in their potential to develop fungicide resistance, use the resistance management strategies for each disease given in the SPECIFIC USE DIRECTIONS section in this label.

Syngenta Crop Protection encourages responsible resistance management to ensure effective long-term control of the fungal diseases on this label.

MIXING INSTRUCTIONS

To prepare spray solution, partially fill the spray tank with clean water and begin agitation. Add the specified amount of Heritage Fungicide to the tank, allowing adequate time for good mixing. Add an adjuvant if appropriate. Finish filling the tank to the desired volume to obtain the proper spray concentration. Maintain agitation throughout the spraying operation. DO NOT allow spray mixture to stand overnight or

Heritage Fungicide Page 13 for prolonged periods. Mix only the amount of spray required for your immediate use. Sprayers should be thoroughly cleaned immediately after application.

Heritage Fungicide is compatible with commonly used fungicides, liquid fertilizers, herbicides, insecticides and biological control products. If tank mixes are desired, products should be added to the spray tank in the following order: Heritage Fungicide, other WG or dry flowable formulations, wettable powders and flowable (aqueous suspension) products. Observe all directions, precautions, and limitations on labeling of all products used. Consult compatibility charts or your local or state agricultural or turf authorities for compatibility information.

Adjuvants: When an adjuvant is to be used with this product, use an adjuvant that meets the standards of the Chemical Producers and Distributors Association (CPDA) adjuvant certification program.

DO NOT mix Heritage Fungicide in the spray tank with pesticides, surfactants or fertilizers unless compatibility charts or your own prior use has shown that the combination is physically compatible, effective and non-injurious under your conditions of use. If physical compatibility is unknown, the following procedure should be followed: Pour the specified proportions of the products into a suitable container of water, mix thoroughly and allow it to stand at least 20 minutes. If the combination remains mixed or can be re-mixed readily, the mixture is considered physically compatible.

Heritage Fungicide is incompatible with many fertilizers when low water volumes are used for in-furrow applications. Cold temperatures and water quality exacerbate these compatibility problems. Conduct a physical compatibility test as described in the paragraph as above before making a field application.

NOTE: Heritage Fungicide has demonstrated some phytotoxic effects when mixed with products that are formulated as EC’s. These effects are enhanced if applications are made under cool, cloudy conditions and these conditions remain for several days following application. In addition, silicone-containing adjuvants have also contributed to phytotoxicity.

APPLICATION INSTRUCTIONS

Heritage Fungicide should be applied prior to disease development at the rates and timings given in this label. Apply at the higher rates in the rate range and/or shorter spray intervals under conditions of heavy infection pressure, on highly susceptible varieties or when environmental conditions are conducive for disease development. Use of Heritage Fungicide as a "rescue" (late curative or eradicant) treatment is not recommended and may not give satisfactory disease control.

Heritage Fungicide may be applied with various types of spray equipment commonly used for making ground and aerial applications. For ground applications, apply

Heritage Fungicide Page 14 Heritage Fungicide in a volume of water sufficient to provide good plant canopy penetration and coverage. For aerial applications, apply Heritage Fungicide in a minimum of two gallons of water per acre. Ground application is preferred as it typically provides better canopy penetration and coverage.

Proper adjustments and calibration of spraying equipment are essential for optimal disease control. If you have questions about calibration, contact a State Extension Service specialist, the equipment manufacturer or other experts.

Directions for Use through Sprinkler and Drip Chemigation Systems

Spray Preparation: Chemical tank and injector system should be thoroughly cleaned. Flush system with clean water.

Use Precautions for Sprinkler and Drip Irrigation Applications:

Drip and Micro Irrigation: Heritage Fungicide may be applied through drip and micro irrigation systems to potted ornamentals or to bedded, field-grown ornamentals for soil- borne disease control. The soil or potting media should have adequate moisture capacity prior to drip application.

Terminate drip irrigation at fungicide depletion from the main feed supply tank or after 6 hours from start, whichever is shorter. For maximum efficacy, subsequent irrigation (water only) should be delayed for at least for 24 hours following drip application.

Sprinkler Irrigation: Apply this product through sprinkler irrigation systems including center pivot, motorized boom, lateral move, end tow, side [wheel] roll, traveler, big gun, solid set, or hand move irrigation systems. Do not apply this product through any other type of irrigation system except as specified on this label.

Apply with center-pivot or continuous-move equipment distributing ½ acre-inch or less during treatment. In general, use the least amount of water required for proper distribution and coverage. If stationary systems (solid set, handlines or wheel lines other than continuous-move) are used, this product should be injected into no more than the last 20-30 minutes of the set. DO NOT apply when winds are greater than 10- 15 mph to avoid drift or wind skips. Plant injury, lack of effectiveness, or illegal pesticide residues in the crop can result from non-uniform treated water. Thorough coverage of foliage is required for good control. Good agitation should be maintained during the entire application period.

If you have questions about calibration, contact the State Extension Service specialist, equipment manufacturers or other experts.

• The system must contain a functional check valve, vacuum relief valve, and low pressure drain appropriately located on the irrigation pipeline to prevent water- source contamination from backflow.

Heritage Fungicide Page 15

• The pesticide injection pipeline must contain a functional, automatic, quick- closing check valve to prevent the flow of fluid back toward the injection pump.

• The pesticide injection pipeline must also contain a functional, normally closed, solenoid-operated valve located on the intake side of the injection pump and connected to the system interlock to prevent fluid from being withdrawn from the supply tank when the irrigation system is either automatically or manually shut down.

• The system must contain functional interlocking controls to automatically shut off the pesticide injection pump when the water pump motor stops.

• The irrigation line or water pump must include a functional pressure switch which will stop the water pump motor when the water pressure decreases to the point where pesticide distribution is adversely affected.

• Systems must use a metering pump, such as a positive displacement injection pump (e.g., diaphragm pump) effectively designed and constructed of materials that are compatible with pesticides and capable of being fitted with a system interlock.

Allow sufficient time for pesticide to be flushed through all lines and all nozzles before turning off irrigation water. A person knowledgeable of the chemigation system and responsible for its operation, or under the supervision of the responsible person, shall shut the system down and make necessary adjustments should the need arise.

DO NOT connect an irrigation system (including greenhouse systems) used for pesticide application to a public water system unless the pesticide label-prescribed safety devices for public water systems are in place.

Specific Instructions for Public Water Systems

1. Public water system means a system for the provision to the public of piped water for human consumption if such system has at least 15 service connections or regularly serves an average of at least 25 individuals daily at least 60 days out of the year.

2. Chemigation systems connected to public water systems must contain a functional, reduced-pressure zone, back-flow preventer (RPZ) or the functional equivalent in the water supply line upstream from the point of pesticide introduction. As an option to the RPZ, the water from the public water system should be discharged into a reservoir tank prior to pesticide introduction. There must be a complete physical break (air gap) between the outlet end of the fill pipe and the top or overflow rim of the reservoir tank of at least twice the inside diameter of the fill pipe.

Heritage Fungicide Page 16

3. The pesticide injection pipeline must contain a functional, automatic, quick-closing check valve to prevent the flow of fluid back toward the injection pump.

4. The pesticide injection pipeline must contain a functional, normally closed, solenoid-operated valve located on the intake side of the injection pump and connected to the system interlock to prevent fluid from being withdrawn from the supply tank when the irrigation system is either automatically or manually shut down.

5. The system must contain functional interlocking controls to automatically shut off the pesticide injection pump when the water pump motor stops, or in cases where there is no water pump, when the water pressure decreases to the point where pesticide distribution is adversely affected.

6. Systems must use a metering pump, such as a positive displacement injection pump (e.g., diaphragm pump) effectively designed and constructed of materials that are compatible with pesticides and capable of being fitted with a system interlock.

7. Do not apply when wind speed favors drift beyond the area intended for treatment.

Heritage Fungicide Page 17 DIRECTIONS FOR TURF

Heritage Fungicide controls the listed pathogens that cause foliar, stem, and root diseases, including leaf and stem blights, leaf spots, patch diseases, mildew, molds and rusts of turfgrass. Heritage Fungicide may be used on golf courses, lawns and landscape areas around residential, institutional, public, commercial and industrial buildings, parks, recreational areas, athletic fields, and sod farms.

Integrated Pest (Disease) Management (IPM)

Sound turf management resulting in healthy, vigorous turf is the foundation of a good IPM program. Cultural practices, such as proper choice of turf variety, nutrient management, proper cutting height, thatch management, and proper watering, drainage, and moisture stress management, should be integrated with the use of fungicides to increase turf vigor and reduce the susceptibility to disease. Immunoassay detection kits and extension service diagnostic services can assist in the early and accurate identification of causal organisms and corresponding selection of the proper fungicide when required.

Resistance Management

DO NOT spray more than two sequential Heritage Fungicide applications for Gray Leaf Spot or Pythium spp. control. For all other diseases when Gray Leaf Spot and Pythium spp. are not present, DO NOT spray more than three sequential applications of Heritage Fungicide.

Application Directions

Heritage Fungicide should be applied prior to disease development. Mix Heritage Fungicide with the required amount of water and apply as a dilute spray in 2-4 gallons of water per 1,000 square feet (87-174 gallons per acre). Repeat applications at specified intervals. For spot treatments, use 0.2 oz of Heritage Fungicide per 1-3 gallons of water.

TURF USE RESTRICTIONS

DO NOT apply more than 10 lb of Heritage Fungicide/Acre (5 lb ai/Acre) per year to crops grown outdoors.

For applications with handheld equipment, DO NOT exceed 0.0025 lb ai/gal.

For applications with mechanically pressurized handwand equipment to golf course (tees, greens, fairways) or landscaping turf, DO NOT exceed 0.95 lb ai/A.

Heritage Fungicide Page 18 Aerial and/or chemigation application to sod is prohibited

DO NOT apply to golf course turf by air.

Soil Injection Application

Heritage Fungicide may be applied through a liquid fungicide injector for the control of ectrotrophic root diseases such as summer patch and take-all patch. Use Heritage Fungicide only in liquid injection equipment specifically designated for pesticide use.

Apply Heritage Fungicide at 0.2 to 0.4 oz per 1,000 sq ft. Spray carrier volume should fall within 30-150 gallons of water per 1,000 sq ft. Use an injection hole spacing of 1 inch by 1 inch for optimum control. Do not exceed injection depth of 2 inches. Use a one-inch depth for optimum results. Application timing should follow disease control strategies used for normal broadcast spray programs.

Application when Establishing Turfgrass from Seed or in Overseeding of Dormant Turfgrass

Heritage Fungicide may be used for control of certain turfgrass diseases associated with turfgrass establishment from seed or during overseeding of dormant turfgrass. Heritage Fungicide may be safely applied before or after seeding or at seedling germination and emergence to ryegrass, bentgrass, bluegrass (including Poa trivialis), and fescue turfgrass types. Optimum application timing is during seeding. See Application Directions section.

Dollar Spot: Heritage Fungicide does not control dollar spot. Mix Heritage Fungicide with another fungicide labeled for dollar spot control when environmental conditions are conducive for disease development. Heritage Fungicide is tank-mix compatible with many fungicides that control dollar spot.

TABLE 1: Directions for Application for Turf Diseases

Target Diseases Use Rate (oz product/ 1,000 sq ft) Application Interval (days) Application Instructions* Anthracnose (Colletotrichum cereale) 0.2-0.4 14-28 Use preventatively. Begin applications when conditions are favorable for disease infection, prior to disease symptom development. Take-all root rot Bermudagrass Decline (Gaeumannomyces spp.) 0.4 28 Use preventatively. Begin applications when conditions are favorable for disease infection prior to disease symptom development. Brown Patch (Rhizoctonia solani) 0.2-0.4 14-28 Apply when conditions are favorable for disease development.

Heritage Fungicide Page 19 Target Diseases Use Rate (oz product/ 1,000 sq ft) Application Interval (days) Application Instructions* Brown Ring Patch (Waitea circinata) 0.2-0.4 14-28 Apply when conditions are favorable for disease development Yellow Patch (Rhizoctonia cerealis) 0.2-0.4 14-28 Make one or two applications in fall or when conditions are favorable for disease development.

Fairy Ring (Lycoperdon spp., Agrocybe pediades, Arachnion spp., Bovista spp., and Vascellum spp.)

0.4

28

Apply preventatively or as soon as possible after fairy ring symptoms develop. Add the specified rate of a wetting agent to the final spray and water-in immediately with 1/8 to 1/4 inches irrigation. Fairy ring symptoms may take 2 to 3 weeks to disappear following curative application. Reapplication after 28 days may be required in some cases. Severely damaged or thin turf may require reseeding. Microdochium Patch (Monographella nivalis) 0.2-0.4 14-28 Use preventatively. Begin applications when conditions are favorable for disease infection, prior to disease symptom development. Gray Leaf Spot (Pyricularia oryzae) 0.2-0.4 14-28 Begin applications before disease is present and continue applications while conditions are favorable for disease development. Gray Snow Mold Typhula blight (Typhula incarnata, and T. ishikariensis) 0.4 10-28 Make two applications of 0.4 oz spaced 10-28 days apart in late fall just before snow cover. When disease pressure is high, tank-mix Heritage Fungicide with another fungicide registered for control of snow mold. Leaf and Sheath Spot (Waitea zeae) 0.4 14-28 Apply when disease conditions are favorable for disease development.

Leaf Rust, Stem Rust, Stripe Rust (Puccinia spp.)

0.2-0.4

14-28

Begin applications when conditions are favorable for disease infection, prior to disease symptom development. Leaf Spot (Bipolaris spp.) 0.2-0.4 14-21 Apply when conditions are favorable for disease development. Melting Out (Drechslera poae) 0.2-0.4 14-21 Apply when conditions are favorable for disease development. Necrotic Ring Spot (Ophiosphaerella korrae) 0.2-0.4 14-28 Apply when conditions are favorable for disease development. Pink Patch (Limonomyses roseipellis) 0.2-0.4 14-28 Apply when conditions are favorable for disease development. Pink Snow Mold (Monographella nivalis) 0.4 10-28 Make two applications of 0.4 oz spaced 10-28 days apart in late fall just before snow cover. When disease pressure is high, tank-mix Heritage Fungicide with another fungicide registered for control of snow mold.

Heritage Fungicide Page 20 Target Diseases Use Rate (oz product/ 1,000 sq ft) Application Interval (days) Application Instructions* Powdery Mildew (Erysiphe graminis) 0.2-0.4 14-28 Begin applications when conditions are favorable for disease infection, prior to disease symptom development. Pythium Blight Pythium Root Rot (Pythium aphanidermatum, Pythium spp.) 0.2-0.4 10-14 Use preventatively. Begin applications before disease is present. During periods of prolonged favorable conditions, treat on the 10-day application interval. For use on newly seeded as well as established turf. Pythium Root Dysfunction (Pythium volutum) 0.4 21-28 Apply preventatively when mean daily soil temperatures are between 55 F and 70 F. Irrigate with 0.1 to 0.2 inches within 24 hours after application to facilitate movement into the root zone. Red Thread (Laetisaria fuciformis) 0.2-0.4 14-28 Apply when conditions are favorable for disease development. Large Patch (Rhizoctonia solani) 0.2-0.4 14-28 Make one or two applications in fall or when conditions are favorable for disease development. Spring applications may also be required in some locations or when disease pressure is high. Southern Blight (Sclerotium rolfsii) 0.2-0.4 14-28 Apply when conditions are favorable for disease development. Summer Patch (Magnaporthiopsis poae) 0.2-0.4 14-28 Apply when conditions are favorable for disease development. Take-all patch (Gaeumannomyces graminis) 0.2-0.4 28 Begin applications when conditions are favorable for disease infection, prior to disease symptom development. Make two applications 28 days apart in the spring and two applications 28 days apart in the fall.

*Do not apply more than two sequential applications of Heritage Fungicide for control of Gray L eaf Spot and Pythium spp. For all other diseases when Gray Leaf Spot and Pythium spp. are not present, do not apply more than three sequential applications of Heritage Fungicide.

TABLE 2: Heritage Fungicide Rate Conversion Chart for Turf

Oz Product/ 1,000 sq ft Oz AI/ 1,000 sq ft Oz Product/ Acre Pound Product/ Acre 0.20 0.10 8.7 0.5 0.30 0.15 13.1 0.8 0.40 0.20 17.4 1.1

Heritage Fungicide Page 21 TABLE 3: Amount of Heritage Fungicide to Mix 100 Gallons for Turf Applications

Spray Volume (gallons/1,000 sq ft) Heritage Fungicide Use Rate 2.0 gallons 3.0 gallons 4.0 gallons 0.20 oz 10 oz 6.7 oz 5 oz 0.40 oz 20 oz 13.3 oz 10 oz

DIRECTIONS FOR ORNAMENTALS

Heritage Fungicide controls listed pathogens that cause foliar, aerial, and root diseases, including: leaf, tip, and flower blights; leaf spots; downy mildew; powdery mildew; anthracnose; and rusts of ornamental plants. Heritage Fungicide may be used to control certain diseases of container, bench, flat, plug, bed, succulents or field-grown ornamentals in greenhouses, shade- and lath-houses, outdoor nurseries, retail nurseries, interiorscapes, and other landscape areas.

Integrated Pest (Disease) Management (IPM)

Heritage Fungicide should be integrated into an overall disease management strategy that includes selection of varieties with disease tolerance, optimum plant populations, proper fertilization, winter and/or spring pruning, plant debris management and proper timing and placement of irrigation. Immunoassay detection kits and diagnostic services can assist in the early and accurate identification of causal organisms and corresponding selection of the proper fungicide when required.

Resistance Management

DO NOT make more than three (3) sequential applications of Heritage Fungicide before alternating with a fungicide of a different mode of action. A sound resistance management program would include blocks of three Heritage Fungicide applications separated by blocks of two alternate fungicide applications. DO NOT alternate Heritage Fungicide with other strobilurin fungicides.

Application Directions

Apply Heritage Fungicide as a foliar or soil broadcast, drench, or banded spray targeted at the foliage or crown of the plant. Apply to the point of runoff to ensure complete coverage of the target plant. Good coverage and wetting of foliage is necessary for best control. Refer to the label for specific use directions for control of certain diseases. Repeat applications at specified intervals using an appropriate resistance management program.

Apply Heritage Fungicide at listed use rates. The addition of an adjuvant at the specified use rate may enhance coverage on hard-to-wet plant foliage. Under light to

Heritage Fungicide Page 22 moderate disease pressure, use the lower listed rates and shorter listed application interval. Under environmental conditions conducive to severe disease development, use the higher rates and shorter listed application interval. Use of Heritage Fungicide as a "rescue" (late curative or eradicant) treatment is not recommended and may not result in satisfactory disease control.

ORNAMENTALS USE RESTRICTIONS

DO NOT apply more than 0.75 lb ai/A for field-grown or nursery ornamentals by groundboom or chemigation.

For applications with handheld equipment to nursery ornamentals, broadcast application or landscaping (plants, flowers, trees and turf), DO NOT exceed 0.0025 lb ai/gal.

For application with handheld equipment to Christmas tree, DO NOT exceed 0.00125 lb ai/gal.

For application with mechanically pressurized handwand to greenhouse ornamentals, DO NOT exceed 0.0025 lb ai/gal.

DO NOT apply greater than 2 pints of solution per square foot for drench and crown applications.

DO NOT exceed 600 gallons spray volume per acre for foliar applications.

DO NOT tank-mix Heritage Fungicide with other fungicides, insecticides, herbicides, fertilizers, or adjuvants unless local experience indicates that the tank mix will not injure ornamental plants.

DO NOT apply Heritage Fungicide to apple or cherry trees (including flowering and ornamental varieties, such as Yoshino) due to possible phytotoxicity.

DO NOT use spray equipment that has applied Heritage Fungicide for use in these sensitive crops due to possible phytotoxicity from residue remaining in the sprayer.

DO NOT apply more than 10 lb of Heritage Fungicide/Acre (5 lb ai/Acre) per year to crops grown outdoors.

Drench Application

Heritage Fungicide may be applied to control soilborne, seedling, and crown diseases of ornamentals as a preventative drench treatment prior to infection. Good coverage of

Heritage Fungicide Page 23 the pre-infection area (root zone, root ball, and crown) is necessary for satisfactory control. Heritage Fungicide may be applied by drench to container-grown ornamentals. Make a drench application prior to infection as healthy roots are necessary to optimize product uptake and systemic translocation to optimize disease protection. Due to the systemic activity of Heritage Fungicide, suppression of certain foliar diseases has been observed in plants treated with drench applications.

Use caution before applying Heritage Fungicide as a drench to small bedding plants in the seedling/plug stage due to possible phytotoxicity. A limited quantity of plants should be tested prior to full-scale application.

Chemigation: Use through Sprinkler and Drip Irrigation Systems

Heritage Fungicide may be applied through sprinkler, drip, or other micro irrigation systems to potted ornamentals or to bedded, field-grown ornamentals for soil-borne disease control. Apply Heritage Fungicide as a preventative treatment. The soil or potting media should have adequate moisture capacity prior to drip application.

Terminate irrigation at fungicide depletion from the main feed supply tank or after 6 hours from start, whichever is shorter. For maximum efficacy, subsequent irrigation (water only) should be delayed for at least for 24 hours following application.

PHYTOTOXICITY Application of Heritage Fungicide to crabapple may cause phytotoxicity. Heritage Fungicide may be applied to specific tolerant varieties of crabapple. Heritage Fungicide has been shown to be safer when applied to the species and varieties listed in Table 12. Due to the large number of species, and varieties of crabapple, it is impossible to test every one for tolerance to Heritage Fungicide. The user should conduct small-scale testing to ensure plant safety prior to large-scale commercial use on plant species and varieties not listed on this label.

When used in accordance with the label directions, Heritage Fungicide will provide control of the diseases of ornamental plants in the following table.

Heritage Fungicide Page 24 TABLE 4: Foliar Plant Diseases Controlled (Heritage Fungicide is sold in several product container sizes. For product container sizes of 8 oz and larger, follow the mixing instructions in the second column. For the 4 oz product container size, follow the mixing instructions in the third column in the following table.) DISEASE (Pathogen) Application Instructions 8 oz and larger product container sizes (oz product per 100 gallons) 4 oz product container size (oz product per 50 gallons) CONIFER BLIGHTS Phomopsis Blight (Phomopsis juniperovora) Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 days. Tip Blight (Sirococcus strobilinus) Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 days. LEAF BLIGHTS/LEAF SPOTS Alternaria Leaf Spot (Alternaria spp.) Apply 1-8 oz every 7-28 days. Apply 0.5-4 oz every 7-28 days. Anthracnose (Colletotrichum spp., Elsinoe spp.) Apply 1--8 oz every 7-28 days. Apply 0.5-4 oz every 7-28 days. Cercospora Leaf Spot (Cersospora spp.) Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 days. Cylindrocladium leaf spot/stem canker (Cylindrocladium spp.) Apply 4-8 oz every 7-14 days. Apply 2-4 oz every 7-14 days. Downy Mildew (including Peronospora spp., Plasmopara spp., Bremiella spp., Bremia spp.) Apply 2-4 oz every 7-21 days during periods of active plant growth and prior to dormancy or severe infection. Use lower use rates for herbaceous seedlings. Apply 1-2 oz every 7-21 days during periods of active plant growth and prior to dormancy or severe infection. Entomosporium Leaf Spot (Entomosporium spp.) (Diplocarpon spp.) Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 days. Iris Leaf Spot (Mycosphaerella spp.) Apply 2-4 oz every 7-21 days. Apply 1-2 oz every 7-21 days. Leaf spot (Cladosporium spp., Septoria spp. and Stemphylium spp.) Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 days.

Heritage Fungicide Page 25 DISEASE (Pathogen) Application Instructions 8 oz and larger product container sizes (oz product per 100 gallons) 4 oz product container size (oz product per 50 gallons) Rose Blackspot (Diplocarpon rosea) Apply 4-8 oz every 7-14 days. Under severe disease conditions or if disease is already present, apply Heritage Fungicide at the highest listed rate and shortest application interval. Heritage Fungicide may be tank-mixed with another rose blackspot fungicide. Do not exceed 24 oz/A per application. Apply 2-4 oz every 7-14 days. Under severe disease conditions or if disease is already present, apply Heritage Fungicide at the highest listed rate and shortest application interval. Heritage Fungicide may be tank-mixed with another rose blackspot fungicide. Do not exceed 24 oz/A per application. Myrothecium leaf spot (Myrothecium spp.) Apply 2-4 oz every 7-21 days. Apply 1-2 oz every 7-21 days. Scab (Venturia inaequalis, Sphaceloma poinsettiae, Elsinöe australis) Apply 1-4 oz every 10-28 days. Do not apply to apple trees. For crabapples, see Table 12 for tolerant varieties. Apply 0.5-2 oz every 10-28 days. Do not apply to apple trees. For crabapples, see Table 12 for tolerant varieties. Marssonina Leaf Spot (Marssonina spp.) Apply 1-4 oz every 14-28 days. Apply 0.5-2 oz every 14-28 days. POWDERY MILDEW Erysiphe spp., Microsphaera spp., Podosphaera spp. , Oidium spp., Podosphaera spp., Uncinula spp. Apply 1-4 oz every 7-28 days. Do not make more than 2 sequential applications before rotating to another class of fungicide. Apply 0.5-2 oz every 7-28 days. Do not make more than 2 sequential applications before rotating to another class of fungicide. RUSTS Needle Rust (Melampsora occidentalis) Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 days. Other Rusts (Phragmidium spp., Puccinia spp., Gymnosporangium spp., Coleosporium spp., Uromyces spp.) Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 days. FLOWER BLIGHTS Anthracnose (Collectotrichum spp., Elsinoe spp.) Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 days. Botrytis Blight (Botrytis cinerea) Apply 4-8 oz every 7-21 days. For suppression only. Do not exceed 24 oz/acre. Apply 2-4 oz every 7-21 days. For suppression only. Do not exceed 24 oz/acre.

Heritage Fungicide Page 26 DISEASE (Pathogen) Application Instructions 8 oz and larger product container sizes (oz product per 100 gallons) 4 oz product container size (oz product per 50 gallons) SHOOT/STEM DISEASES Aerial/Shoot Blight (Phytophthora spp.) Apply 1-4 oz every 7-28 days. Apply 0.5-2 oz every 7-28 days. DO NOT apply more than 0.75 lb ai/A for field-grown or nursery ornamentals by groundboom or chemigation. For applications with handheld equipment to nursery ornamentals, broadcast application or landscaping (plants, flowers, trees and turf), DO NOT exceed 0.0025 lb ai/gal. For application with mechanically pressurized handwand to greenhouse ornamentals, DO NOT exceed 0.0025 lb ai/gal DO NOT exceed 600 gallons spray volume per acre for foliar applications. DO NOT apply more than 10 lb of Heritage Fungicide/Acre (5 lb ai/Acre) per year to crops grown outdoors.

TABLE 5: Soilborne Diseases Controlled – Directed Spray

Pathogen Application Instructions 8 oz and larger product container sizes (oz product per 100 gallons) 4 oz product container size (oz product per 50 gallons) Fusarium spp. Rhizoctonia solani Athela rolfsii (Sclerotium rolfsii) Sclerotinia spp. Apply 1-4 oz every 7-21 days. Apply 0.5-2 oz every 7-21 days.

Heritage Fungicide Page 27 TABLE 6: Soilborne Diseases Controlled – Drench and Drip Irrigation See Drench Application section of ORNAMENTAL DIRECTIONS FOR USE for additional drench directions.

Pathogen Use Rate (oz product/100 gallons) Application Instructions Fusarium spp. Rhizoctonia solani Athelia rolfsii (Sclerotium rolfsii) 0.2-1.2 oz Apply 1-2 pints of the solution per square foot surface area every 7-28 days. Sclerotinia spp. 1.2 oz Apply 1-2 pints of the solution per square foot surface area every 7-28 days. Apply for control of Sclerotinia by drench application only. DO NOT apply greater than 2 pints of solution per square foot for drench and crown applications.

TABLE 7: Soilborne Diseases Controlled – Banded Applications

Pathogen Use Rate (oz product/1,000 row feet) Application Instructions Fusarium spp. Rhizoctonia solani Athelia rolfsii (Sclerotium rolfsii) Sclerotinia spp. 0.2-0.41 oz Apply as a banded spray, 7 inches or less in width, directed to the soil using single or multiple spray nozzles adjusted to provide thorough coverage of lower stems2 and the soil surface. 1When applications are applied to crops grown using 22-inch row spacing, the maximum application rate is 0.35 oz/1,000 row feet. 2Applications that come into contact with the foliage are considered foliar applications for resistance management.

TABLE 8: Soilborne Diseases Controlled – In-furrow Application

Pathogen Use Rate (oz product/1,000 row feet) Application Instructions Fusarium spp. Rhizoctonia solani Athelia rolfsii (Sclerotium rolfsii)

0.2-0.3 oz1 Mount the spray nozzle to allow the spray mixture to be applied directly into the furrow and before the propagated unit (seed, seed pieces, bulbs or corms) are covered by soil. Apply the higher listed rate when current or expected weather conditions are conducive for disease development. Suppression Only: Pythium spp. 1Apply product in 3 to 15 gallons of water per 1,000 row feet.

Heritage Fungicide Page 28

TABLE 9: Soilborne Diseases Controlled – Broadcast Application

Pathogen Use Rate (oz product/A) Application Instructions Fusarium spp. Rhizoctonia solani Athelia rolfsii (Sclerotium rolfsii) Sclerotinia spp. 2-16 oz Apply as a preventative broadcast application. Soil or potting media should have adequate moisture capacity prior to application if applied by overhead irrigation.

TABLE 10: Foliar and Soil Diseases Suppressed – Drench and Drip Applications

Disease/Pathogen Use Rate (oz product/100 gallons) Application Instructions Rusts Powdery Mildew Pythium spp. 0.45-1.2 oz Apply 1-2 pints of the solution per square foot surface area every 7- 28 days. DO NOT apply greater than 2 pints of solution per square foot for drench and crown applications.

Plant Safety

Heritage Fungicide has been shown to be safe when applied to the ornamental plants listed in Tables 11 and 12 when applied according to listed application methods, rates, and timings. Due to the large number of species and varieties of ornamental and nursery plants, it is impossible to test every one for tolerance to Heritage Fungicide. Neither the manufacturer nor the seller has determined whether or not Heritage Fungicide can be used safely on ornamental and nursery plants not specified on this label. The user should conduct small-scale testing to ensure plant safety prior to large- scale commercial use on varieties not listed on this label. Note: Applications to petunia and impatiens in bloom may occasionally cause discoloration to the flowers.

DO NOT tank-mix Heritage Fungicide with other fungicides, insecticides, herbicides, fertilizers, or adjuvants unless local experience indicates that the tank mix is safe to ornamental plants.

DO NOT apply Heritage Fungicide to certain crabapple or cherry trees (including flowering or ornamental varieties, such as Yoshino) due to possible phytotoxicity (see Table 13 for complete list). DO NOT use spray equipment that has been used to apply Heritage Fungicide for use in these sensitive crops due to possible phytotoxicity.

Heritage Fungicide Page 29 TABLE 11: Tolerant Plants Listed by Common Name

COMMON NAME BOTANICAL NAME Abelia Abelia spp. Andromeda, Japanese Pieris japonica Arborvitae Thujopsis spp. Aspen Trees Populus spp. Aster Aster spp. Aucuba, Japanese Aucuba japonica Azalea, Glacier Rhododendron spp. Azaleas Rhododendron spp. Balsam Impatiens spp. Barberry Berberis thunbergii Begonia (except Rieger begonia) Begonia spp. Birch, River Betula nigra Black-Eyed Susan Rudbeckia hirta Blanket Flower Gaillardia spp. Bougainvillea Bougainvillea spp. Boxwood Buxus sempervirens Buddleia Buddleia davidii Bugle Ajuga reptans Bugleweed Ajuga reptans Burning Bush Euonymus alatus Butterfly Bush Buddleia davidii Cactus, Holiday Schlumbergera Caladium Caladium spp. Camellia Camellia japonica Carnation Dianthus caryophyllus Ceanothus Ceanothus spp. Cedar, Atlas Cedrus atlantica Cedar, Red Juniperus virginiana Cedar, Western Red Thuja plicata Cedar, White Cedrus spp. Christmas Trees See Fir, Douglas; Fir, Fraser; and Pine, Scotch Chrysanthemum Chrysanthemum spp. Cinquefoil Potentilla spp. Clethra Clethra alnifolia Coleus Plectranthus spp. Cotoneaster, Creeping Cotoneaster adpressus Cotoneaster, Variegated Rockspray Cotoneaster horizontalis Crabapple (See Table 12 for variety list) Malus spp. Cranesbill Geranium spp.

Heritage Fungicide Page 30 COMMON NAME BOTANICAL NAME Crapemyrtle Lagerstroemia indica Cyclamen Cyclamen spp. Cyperus Cyperus spp. Cypress, Sawara Chamaecyparis pisifera Cypress, Leyland Chamaecyparis spp. Daisy, Gerber Gerbera jamesonii Daisy, Transvaal Gerbera jamesonii Dogwood Cornus spp. Dogwood Cornus florida Dogwood, Pink Cornus spp. Dumb-Cane Dieffenbachia spp. Euonymus, Dwarf Winged Euonymus alata Euonymus, Evergreen Euonymus japonicus Evergreen, Chinese Aglaonema spp. Fatsia, Japanese Fatsia japonica Fig Ficus spp. Fir, Douglas Pseudotsuga spp. Fir, Fraser Abies fraseri Fir, Noble Abies procera Floss Flower Ageratum spp. Forsythia Forsythia viridissima Foxglove Digitalis spp. Gardenia Gardenia jasminoides Geranium Pelargonium spp. Grass Pennisetum alopecuroides Grass, Dwarf Pampas Phalaris spp. Grass, Pampas Cortaderia selloana Hawthorn, Indian Rhaphiolepsis indica Heather Erica dareyensis Hemlock Tsuga spp. Hemlock, Western Tsuga heterophylla Hibiscus Hibiscus moscheutos Hibiscus Hibiscus rosa-sinensis Holly Ilex spp. Hosta Hosta spp. House Leek Sempervivum spp. Hydrangea Hydrangea spp. Hydrangea, French Hydrangea macrophylla Impatiens1,2 Impatiens spp. 1,2 Iris (Bulbous, Spanish, Dutch) Iris xiphium Iris, African Dietes iridiodes

Heritage Fungicide Page 31 COMMON NAME BOTANICAL NAME Iris, Butterfly Dietes iridiodes Ivy, Algerian Hedera algeriensis Ivy, English Hedera helix Ivy, Swedish Plectranthus spp. Japanese Pittosporum Pittosporum tobira Juniper Juniperus procumbens Juniper Juniperus scopulorum Juniper Juniperus spp. Larkspur Delphinium spp. Laurel Laurus nobilis Laurel, Australian Pittosporum spp. Laurel, Japanese Aucuba japonica Lilac, California Ceanothus spp. Lilac, Wild Ceanothus sanguineus Lily, Asiatic Lilium spp. Lily, Peace Spathiphyllum floribundium Lily-Turf Liriope muscari Live-Forever Sempervivum spp. Magnolia Magnolia spp. Magnolia, Saucer Magnolia soulangiana Magnolia, Southern Magnolia grandiflora Maple, Japanese Acer palmatum Maple, Sugar Acer saccharum Marigold Tagetes spp. Mugwort Artemisia spp. Nandina Nandina domestica Oak, Pin Quercus palustris Oak, Red Quercus falcata Oleander Nerium oleander Orpine Sedum spp. Palm, Date Phoenix dactylifera Palm, Parlor Chamaedora elegans Palm, Queen Syagrus romanzoffianum Palm, Robellini Phoenix roebelenii Palm, Sago Caryota urens Pansy1 Viola spp.1 Paper Plant Fatsia japonica Pear, Bradford's Pyrus calleryana Periwinkle Vinca spp. Petunia2 Petunia spp.

Heritage Fungicide Page 32 COMMON NAME BOTANICAL NAME Philodendron Philodendron spp. Phlox Phlox spp. Photinia, Red-Tip Photinia glabra Pine Pinus spp. Pine, Black Pinus nigra Pine, Eastern White Pinus strobus Pine, Mugo Pinus mugo Pine, Scotch Pinus sylvestris Pink Dianthus spp. Plum, Flowering Prunus spp. Plum, Purple-Leaf Prunus spp. Poinsettia Euphorbia spp. Poplar Populus trichocarpa Pothos Epipremnum spp. Primrose Primula spp. Pussy's Foot Ageratum spp. Redbud, Western Cercis occidentalis Rhododendron Rhododendron spp. Ribbon Grass Setaria spp. Rose of Sharon Hibiscus syriacus Rose Rosa spp. Rose-Bay Nerium oleander Rosemary (Prostrate) Rosmarinus spp. Rubber Plant, Baby Peperomia spp. Rubber Tree Brassaia actinophylla Sage Salvia spp. Sand cherry Prunus pumila Snap-Dragon Antirrhinum spp. Snowball Ceanothus spp. Spirea Spirea budalda Spirea Spirea japonica Spruce, Blue Picea pungens Spruce, Norway Picea abies Spruce, White Picea glauca Starwort Aster spp. Stonecrop Sedum spp. Succulent Succulents encompass a wide variety of genera, including but not limited to Echeveria, Crassula, Haworthia, Gasteria, Agave, Euphorbia, Senecio, Sedum, and Sempervivum. Sweet Alyssum Lobularia maritima

Heritage Fungicide Page 33 COMMON NAME BOTANICAL NAME Thyme, Creeping Thymus serphyllum Umbrella Tree Brassaia actinophylla Verbena Verbena spp. Vervain Verbena spp. Viburnum Viburnum spp. Vinca Catharanthus roseus Viola Viola spp. White Alder Clethora spp. Weigela, Pink Weigela florida Willow, Virginia Itea virginica Winterberry Ilex spp. Wormwood Artemisia spp. Yaupon Ilex spp. Yew, Spreading Taxus baccata Yucca Yucca spp. Zebra Plant Aphelandra spp. Zinnia Zinnia spp. 1 Do not exceed 2 oz/100 gallons on these species. 2 Heritage Fungicide may occasionally cause discoloration of flowers when applied directly to blooms of certain plant species. Not all varieties and colors have been evaluated.

TABLE 12: Tolerant Varieties of Ornamental Crabapple Species (Genus Malus)

Callaway Golden Raindrops Mary Potter Selkirk Carmine (M. atrosanguinea) Hopa Molten Lava Sentinel Candymint Sargent Indian Magic New Centennial Silver Moon Christmas Holly Island Ormiston Roy Silverdrift David Jackii (M. baccata var. jackii) Pink Satin Sinai Fire Dolgo Japanese Flowering Crabapple (M. floribunda) Prairie Maid Sugar Tyme Donald Wyman Katherine Prairiefire Van Eseltine Dorothea Lancelot Profusion White Angel Doubloons Louisa Ralph Shay Wild crabapple (M. coronaria) Eleyi Malus x zumi var. Calocarpa Red Baron Winter Gold Evereste M. sargentii Red Jade Eyelynn Manchurian (M. baccata var. mandshurica) Sargent

Heritage Fungicide Page 34 TABLE 13: Plants Sensitive to Heritage Fungicide (Do not apply Heritage Fungicide to these species or varieties.)

COMMON NAME BOTANICAL NAME Crabapple - Flame variety Malus spp. ‘Flame’ Crabapple – Brandywine variety Malus spp. ‘Brandywine’ Crabapple – Novamac variety Malus spp. ‘Novamac’ Cherry, Flowering – Yoshino variety Prunus x yedoensis Leatherleaf Fern and Other Ferns for cut foliage Rumohra adianformis and other species Privet Ligustrum spp.

Heritage Fungicide Page 35 CONIFERS INCLUDING CHRISTMAS TREES AND COMMERCIAL PRODUCTION ROSES

Heritage Fungicide may be used to control certain diseases on conifers and commercial production roses in indoor and outdoor production and landscape situations. See the DIRECTIONS FOR ORNAMENTALS section above for more detailed directions for use in landscape situations. [On the following Specific Use Directions for Conifer and Commercial Rose Production table, use the oz product/A rate (column 3) for products 8 oz or larger. Use the oz product/0.5 A rate (column 4) for 4 oz products.]

TABLE 14: Specific Use Directions for Conifer and Commercial Rose Production Crop Target Diseases Use Rate oz product/A (lb ai/A) Use Rate oz product/0.5 A (lb ai/A) Application Instructions Conifers including Christmas Trees Diplodia tip blight (Diplodia pinea)

Lophodermium needlecast (Lophodermium pinastri)

Swiss needlecast (Phaeocrytopus gaumannii) 3.2-8.0 (0.10-0.25) 1.6-4.0 (0.10-0.25) Integrated Pest (Disease) Management: Heritage Fungicide should be integrated into an overall disease management strategy that includes selection of varieties with disease tolerance and removal of plant debris in which inoculum may overwinter.

Resistance Management: Do not apply more than four sequential applications of Heritage Fungicide before alternating with a fungicide that is not in Group 11. Do not make more than eight applications of Heritage Fungicide per acre per year.

Begin Heritage Fungicide applications prior to disease development and continue throughout the disease development period at 7- to 21-day intervals following the resistance management guidelines.

Applications may be

Heritage Fungicide Page 36 Crop Target Diseases Use Rate oz product/A (lb ai/A) Use Rate oz product/0.5 A (lb ai/A) Application Instructions made by ground, air or chemigation. An adjuvant may be added at specified rates. Specific Use Restrictions: DO NOT apply more than 4.0 pounds product/acre (2.0 lb ai/A/year). Maximum application rates for Christmas tree using any handheld equipment: DO NOT exceed 0.00125 lb ai/gal for foliar applications.

Roses (commercial production) Black spot (Diplocarpon rosea) Cercospora Leaf spot (Cercospora spp.) Downy Mildew (Peronospora sparsa) Powdery Mildew (Podosphaera pannosa ) Rust (Phragmidium mucronatum, P. tuberculatum, and other Phragmidium spp.) Septoria Leaf Spot (Septoria rosea) Alternaria Leaf Spot (Alternaria alternata) 1.6-8.0 (0.05-0.25) 0.8-4.0 (0.05-0.25) Integrated Pest (Disease) Management: Heritage Fungicide should be integrated into an overall disease management strategy that includes selection of varieties with disease tolerance, optimum plant populations, proper fertilization, winter and/or spring pruning, plant residue management and proper timing and placement of irrigation.

Resistance Management: Do not make more than four sequential applications of Heritage Fungicide before alternating with a fungicide that is not in Group 11. Do not make more than eight applications per acre per year.

Begin Heritage Fungicide application prior to disease development and continue throughout the disease development period on 7- to 21-day intervals following the resistance management guidelines.

Applications may be made by ground, air or chemigation. An adjuvant may be added at specified

Heritage Fungicide Page 37 Crop Target Diseases Use Rate oz product/A (lb ai/A) Use Rate oz product/0.5 A (lb ai/A) Application Instructions rates. Specific Use Restrictions: Do not apply more than 4.0 pounds product/acre (2.0 lb ai/A/year). DO NOT apply more than 0.75 lb ai/A for field-grown or nursery ornamentals by groundboom or chemigation. For applications with handheld equipment, DO NOT exceed 0.0025 lb ai/gal. For application with mechanically pressurized handwand to greenhouse ornamentals, DO NOT exceed 0.0025 lb ai/gal DO NOT exceed 600 gallons spray volume per acre for foliar applications.

Heritage Fungicide Page 38 PLANTS GROWN FOR FRUIT AND NUTS

RESTRICTION: Heritage may be applied to fruit and nut trees, fruiting vines, brambles and bushberries grown in ornamental production nurseries and intended for resale to the consumer market. In some instances, immature and or/inedible berries, fruits, or nuts may be present on the plant at the time of the application but are not intended for immediate harvest or consumption.

[On the following Fruit and Nut tables, use the oz product/A rate (column 3) for products 8 oz or larger. Use the oz product/0.5 A rate (column 4) for 4 oz products. Use the oz product/1,000 sq ft rate (column 5) for all product sizes.]

Heritage Fungicide Page 39 TABLE 15: Specific Use Directions for Almonds Crop Target Diseases Use Rate oz product/A (lb ai/A)

Use Rate oz product/0.5 A (lb ai/A) Use Rate oz product/ 1,000 sq ft Application Instructions Almonds Alternaria leaf and fruit spot (Alternaria alternata) Anthracnose (Colletotrichum acutatum) Leaf Blight (Seimatosporium lichenicola) Leaf rust (Tranzschelia discolor) Scab (Cladosporium carpophilum) Shothole (Wilsonomyces carpophilus) 3.2-8.0 (0.1-0.25)

1.6-4.0 (0.1-0.25)

0.075- 0.18

Resistance Management: Do not apply more than two sequential applications of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11.

Begin Heritage Fungicide applications prior to disease development and continue throughout the disease development period following the resistance management guidelines. Applications may be made by ground, air (minimum 15 GPA) or chemigation. Heritage Fungicide may be applied by air only at growth stages prior to and including 5 weeks after petal fall. An adjuvant may be added at specified rates.

For anthracnose, scab and shothole, begin applications prior to disease development and continue at 7- to 14-day intervals throughout the disease development period. Brown Rot Blossom Blight (Monilinia laxa, M. fructicola) 6.4 – 8.0 (0.2-0.25)

3.2-4.0 (0.2-0.25)

0.15- 0.18 For blossom blight, begin applications at early bloom and continue through petal fall. Specific Use Restrictions: • Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. • Do not apply within 28 days of harvest (28-day PHI).

Heritage Fungicide Page 40 TABLE 16: Specific Use Directions for Bananas and Plantains Crop Target Diseases Use Rate oz product/A (lb ai/A) Use Rate oz product/0.5 A (lb ai/A) Use Rate oz product/ 1,000 sq ft Application Instructions Bananas Plantains Black Sigatoka (Mycosphaerella fijiensis) Yellow Sigatoka (Mycosphaerella musicola)

2.9-4.3 (0.09- 0.135) 1.45-2.15 (0.09- 0.135) 0.07-0.1 Integrated Pest (Disease) Management: Heritage Fungicide should be integrated into an overall disease management strategy that includes canopy management through removal of suckers, proper plant spacing, selection of varieties with disease tolerance, removal of plant debris in which inoculum overwinters, and good surface water drainage.

Resistance Management: Follow the resistance management guidelines in the Resistance Management section. Do not apply more than two sequential applications of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11.

Begin Heritage Fungicide applications prior to disease development and continue throughout the disease development period every 12- 14 days following the resistance management guidelines. Applications may be made by ground, air or chemigation. An adjuvant may be added at specified rates. Specific Use Restrictions: • Do not apply more than 1.08 lb ai/A per year of azoxystrobin-containing products. • May be applied the day of harvest (0-day PHI).

Heritage Fungicide Page 41 TABLE 17: Specific Use Directions for Berries, Bushberry Subgroup Crop Target Diseases Use Rate oz product/A (lb ai/A) Use Rate oz product/0.5 A (lb ai/A) Use Rate oz product/ 1,000 sq ft Application Instructions Berries Bushberry subgroup

Blueberry Currant Elderberry Gooseberry Huckleberry Lingonberry Juneberry Salal

including all cultivars and/or hybrids of these Alternaria Leaf Spot and Fruit Rot (Alternaria spp.) Anthracnose fruit rot (Colletotrichum gloeosporoides) Botryosphaeria canker (Botryosphaeria spp.) Mummyberry (Vaccinium spp.) Phomopsis stem canker (Phomopsis vaccinii) Powdery mildew (Podosphaera spp. ) Septoria blight (Septoria spp.) 3.2-8.0 (0.1-0.25) 1.6-4.0 (0.1-0.25) 0.08- 0.18 Resistance Management: Follow the resistance management guidelines in the Resistance Management section. Do not apply more than two sequential applications of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11.

Begin Heritage Fungicide applications prior to disease development and continue throughout the disease development period on a 7- to 14- day schedule, following the resistance management guidelines. Applications may be made by ground, air or chemigation. An adjuvant may be added at specified rates. Specific Use Restrictions: • Do not apply more than 0.75 lb ai/A per year of azoxystrobin-containing products. • May be applied the day of harvest (0-day PHI).

Heritage Fungicide Page 42 TABLE 18: Specific Use Directions for Berries, Caneberry Subgroup Crop Target Diseases Use Rate oz product/A (lb ai/A) Use Rate oz product/0.5 A (lb ai/A) Use Rate oz product/ 1,000 sq ft Application Instructions Berries Caneberry subgroup

Blackberry Bingleberry Boysenberry Dewberry Lowberry Marionberry Olallieberry Youngberry Loganberry Red and black raspberry

including all cultivars and/or hybrids of these Anthracnose (Sphaceloma necator) (Elsinoe veneta) Botryosphaeria canker (Botryosphaeria dothidea) Colletotrichum rot (Colletotrichum gloeosporioides) Leaf spot (Septoria rubi) (Sphaerulina rubi) Powdery mildew (Podosphaera macularis) Rosette or double blossom of blackberries (Cercosporella rubi) Spur blight (Didymella applanata)

3.2-8.0 (0.1-0.25) 1.6-4.0 (0.1-0.25) 0.08- 0.18 Integrated Pest (Disease) Management: Heritage Fungicide should be integrated into an overall disease management strategy that includes varieties with disease tolerance, proper timing of irrigation and removal of plant debris in which inoculum overwinters.

Resistance Management: Follow the resistance management guidelines in the Resistance Management section. Do not apply more than two sequential applications of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11.

Begin applications at onset of disease and continue as required until harvest. Make applications on a 7- to 14-day schedule. Applications may be made by ground, air or chemigation. Use a minimum water volume of 10 gallons per acre by ground and a minimum of 3 gallons by air. Specific Use Restrictions: • Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. • May be applied the day of harvest (0-day PHI).

Heritage Fungicide Page 43 TABLE 19: Specific Use Directions for Citrus Fruit Crop Target Diseases Use Rate oz product/A (lb ai/A) Use Rate oz product/0.5 A (lb ai/A) Use Rate oz product/ 1,000 sq ft Application Instructions Citrus Fruit

Calamondin Citron Grapefruit Kumquat Lemon Lime Mandarin Orange (sour and sweet) Pummelo Satsuma mandarin Tangerine

including all cultivars and/or hybrids of these Albinism (Alternaria alternata pv. citri) Alternaria leaf and fruit spot (Alternaria citri) Cercospora leaf spot (Cercospora spp.) Diplodia stem-end rot (Lasiodiplodia theobromae) Greasy spot (Mycosphaerella citri) Melanose (Diaporthe citri) Penicillium Decays Green mold, Whisker mold, suppression of Blue mold (Penicillium spp.) Phomopsis stem-end rot (Phomopsis citrii) Post-bloom fruit drop (PFD) (Colletotrichum acutatum) Powdery mildew (Erysiphe spp.) Scab (Elsinoe fawcettii) 6.4-8.0 (0.2-0.25) 3.2-4.0 (0.2-0.25) 0.15- 0.18 Integrated Pest (Disease) Management: Heritage Fungicide should be integrated into an overall disease management strategy that includes selection of varieties with disease tolerance, removal of plant debris in which inoculum overwinters, and proper timing of irrigation.

Resistance Management: Follow the resistance management guidelines in the Resistance Management section. Do not apply more than two sequential applications of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11. Do not make more than four (4) applications of Heritage Fungicide or other Group 11 fungicide per disease development period.

Begin Heritage Fungicide applications prior to disease development and continue throughout the disease development

Heritage Fungicide Page 44

period on 7- to 21-day intervals following the resistance management guidelines. Under conditions that favor severe disease epidemics, apply Heritage Fungicide at the highest listed rate. Applications may be made by ground, air or chemigation. An adjuvant may be added at specified rates. Use a horticultural spray oil to improve control of greasy spot. Specific Use Restrictions: • Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. • May be applied the day of harvest (0-day PHI).

Heritage Fungicide Page 45 TABLE 20: Specific Use Directions for Grapes Crop Target Diseases Use Rate oz product/A (lb ai/A) Use Rate oz product/0.5 A (lb ai/A) Use Rate oz product/ 1,000 sq ft Application Instructions Grapes

including Muscadines Black rot (Guignardia bidwellii) Downy Mildew (Plasmopara viticola) Phomopsis cane and leaf spot (Phomopsis viticola) Powdery mildew (Uncinula necator)

Suppression Only: Botrytis bunch rot (Botrytis cinerea) 5.1-8.0 (0.16- 0.25) 2.55-4.0 (0.16-0.25) 0.11- 0.18 Integrated Pest (Disease) Management: Heritage Fungicide should be integrated into an overall disease management strategy that includes canopy management through pruning and thinning, proper selection of varieties with disease tolerance, proper timing and placement of irrigation and removal of plant debris in which inoculum overwinters.

Resistance Management: Follow the resistance management guidelines in the Resistance Management section. Do not apply more than two sequential foliar applications of Heritage Fungicide or other Group 11 fungicides before alternating with a fungicide that is not in Group 11.

Begin Heritage Fungicide applications prior to disease development and continue throughout the disease development period every 10-14 days following the resistance management guidelines. Applications may be made by ground, air or chemigation. An adjuvant may be added at specified rates.

ATTENTION Heritage Fungicide is extremely phytotoxic to certain apple varieties. DO NOT spray Heritage Fungicide where spray drift may reach apple trees.

Heritage Fungicide Page 46

DO NOT use spray equipment which has been previously used to apply Heritage Fungicide to spray apple trees. Even trace amounts can cause unacceptable phytotoxicity to certain apple and crabapple varieties.

AVOIDING SPRAY DRIFT IS THE RESPONSIBILITY OF THE APPLICATOR. Specific Use Restrictions: • Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. • Do not apply within 14 days of harvest (14-day PHI).

Heritage Fungicide Page 47 TABLE 21: Specific Use Directions for Pecans Crop Target Diseases Use Rate oz product/A (lb ai/A) Use Rate oz product/0.5 A (lb ai/A) Use Rate oz product/ 1,000 sq ft Application Instructions Pecans Anthracnose (Glomerella cingulata) Scab (Cladosporium caryigenum) 3.2-6.4 (0.10- 0.20) 1.6-3.2 (0.10-0.20) 0.08- 0.15 Integrated Pest (Disease) Management: Heritage Fungicide should be integrated into an overall disease management strategy that includes selection of varieties with tolerance to disease and removal of plant debris in which inoculum overwinters.

Resistance Management: Follow the resistance management guidelines in the Resistance Management section. Do not apply more than two sequential applications of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11.

Begin Heritage Fungicide applications prior to disease development and continue throughout the disease development period on 7- to 21- day intervals following the resistance management guidelines.

Applications may be made by ground, air or chemigation. An adjuvant may be added at specified rates.

Specific Use Restrictions: • Do not apply more than 1.2 lb ai/A per year of azoxystrobin-containing products. • Do not apply within 45 days of harvest (45-day PHI).

Heritage Fungicide Page 48 TABLE 22: Specific Use Directions for Pistachios Crop Target Diseases Use Rate oz product/A (lb ai/A) Use Rate oz product/0.5 A (lb ai/A) Use Rate oz product/ 1,000 sq ft Application Instructions Pistachios Alternaria late blight (Alternaria alternata) Botryosphaeria panicle and shoot blight (Botryosphaeria dothidea) Septoria leaf spot (Septoria pistaciarum) 3.2-8.0 (0.10- 0.25) 1.6-4.0 (0.10-0.25) 0.08- 0.18 Integrated Pest (Disease) Management: Heritage Fungicide should be integrated into an overall disease management strategy that includes selection of varieties with disease tolerance and removal of plant debris in which inoculum overwinters.

Resistance Management: Follow the resistance management guidelines in the Resistance Management section. Do not apply more than two sequential applications of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11.

Begin Heritage Fungicide applications prior to disease development and continue throughout the disease development period on 7- to 21-day intervals following the resistance management guidelines.

Applications may be made by ground, air or chemigation. An adjuvant may be added at specified rates. Specific Use Restrictions: • Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. • Do not apply within 7 days of harvest (7-day PHI).

Heritage Fungicide Page 49 TABLE 23: Specific Use Directions for Stone Fruit

Crop Target Diseases Use Rate oz product/A (lb ai/A) Use Rate oz product/0.5 A (lb ai/A) Use Rate oz product/ 1,000 sq ft Application Instructions Stone Fruit

Apricot Cherry, sweet Cherry, tart Nectarine Peach Plum Plumcot Prune Alternaria spot and fruit rot (Alternaria alternata) Anthracnose (Colletotrichum prunicola, C. gloeosporioides) Leaf rust (Tranzschelia discolor) Powdery mildew (Podosphaera pannosa, Podosphaera clandestina) Scab (Cladosporium carpophilum) Shot hole (Wilsonomyces carpophilus) 3.2-8.0 (0.1-0.25) 1.6-4.0 (0.1-0.25) 0.08- 0.18

Resistance Management: Follow the resistance management guidelines in the Resistance Management section. Do not apply more than two sequential applications of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11.

For brown rot blossom blight, begin applications at early bloom and continue through petal fall. For brown rot on fruit, Heritage Fungicide may be applied to fruit up to the day of harvest. For scab, begin applications at petal fall and continue at 7- to 14-day intervals. For all other diseases, begin application at the onset of disease as a protectant fungicide and continue on a 7- to 14-day schedule. For peaches only, 5-8 oz. of Heritage Fungicide may be used for scab control.

Applications may be Brown rot blossom blight and fruit rot (Monilinia fructicola, M. laxa) 6.4-8.0 (0.2-0.25) 3.2-4.0 (0.2-0.25) 0.15- 0.18

Heritage Fungicide Page 50

made by ground, air or chemigation Specific Use Restrictions: • Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. • May be applied the day of harvest (0-day PHI).

Heritage Fungicide Page 51 TABLE 24: Specific Use Directions for Strawberry

Crop Target Diseases Use Rate oz product/A (lb ai/A) Use Rate oz product/0.5 A (lb ai/A) Use Rate oz product/ 1,000 sq ft Application Instructions Strawberry Anthracnose (Colletotrichum fragariae) Powdery mildew (Podosphaera macularis)

Suppression only: Botrytis on the foliage (Botrytis cinerea)

3.2-8.0 (0.1-0.25) 1.6-4.0 (0.1-0.25) 0.08- 0.18 Resistance Management: Follow the resistance management guidelines in the Resistance Management section. Do not apply more than two sequential applications of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11.

Begin Heritage Fungicide applications prior to disease development and continue throughout the disease development period on a 7- to 10-day schedule, following the resistance management guidelines. Applications may be made by ground, air or chemigation. An adjuvant may be added at specified rates.

Specific Use Restrictions: • Do not apply more than 1.0 lb ai/A per year of azoxystrobin-containing products. • May be applied the day of harvest (0-day PHI).

Heritage Fungicide Page 52 TABLE 25: Specific Use Directions for Tree Nuts (except Almonds, Pecans, and Pistachios) Crop Target Diseases Use Rate oz product/A (lb ai/A) Use Rate oz product/0.5 A (lb ai/A) Use Rate oz product/ 1,000 sq ft Application Instructions Tree Nuts

Beechnut Brazil nut Butternut Cashew Chestnut Chinquapin Filbert Hickory Macadamia Walnut

Almonds, Pecans, Pistachios: see specific use instructions. Alternaria leaf and fruit spot (Alternaria alternata) Anthracnose (Colletotrichum acutatum, Glomerella cingulata) Eastern filbert blight (Anisogramma anomale) Late blight (Alternaria alternata) Scab (Cladosporium carpophilum) Septoria leaf spot (Septoria pistaciarum) Shothole (Wilsonomyces carpophilus) 3.2-6.4 (0.10- 0.20) 1.6-3.2 (0.10-0.20) 0.08- 0.15 Resistance Management: Follow the resistance management guidelines in the Resistance Management section. Do not apply more than two sequential applications of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11.

Begin Heritage Fungicide applications prior to disease development and continue throughout the disease development period following the resistance management guidelines. Applications may be made by ground, air or chemigation. An adjuvant may be added at specified rates.

For all other diseases, begin applications prior to disease development and continue at 7- to 21-day intervals throughout the disease development period. Blossom blight (Monilinia laxa, M. fructicola) 6.4 (0.20) 3.2 (0.20) 0.15 For blossom blight, begin applications at early bloom and continue through petal fall. Do not make more than six applications of Heritage Fungicide or other strobilurin fungicide per acre per year. Specific Use Restrictions: • Do not apply more than 1.2 lb ai/A per year of azoxystrobin-containing products. • Do not apply within 45 days of harvest (45-day PHI).

Heritage Fungicide Page 53 TABLE 26: Specific Use Instructions for Tropical Fruit Crop Target Diseases Use Rate oz product/A (lb ai/A) Use Rate oz product/0.5 A (lb ai/A) Use Rate oz product/1,000 sq ft Application Instructions Tropical Fruit Acerola Atemoya Avocado Biriba Canistel Cherimoya Custard apple Feijoa Guava Ilama Jaboticaba Jackfruit Longan Loquat Lychee Mango Papaya Passionfruit Pawpaw Persimmon Pulasan Pummello Rambutan Sapodilla Sapote, black Sapote, mamey Sapote, white Soursop Star apple Starfruit Sugar apple Spanish lime Tamarind Uniq fruit Alternaria leaf and fruit spot (Alternaria spp.) Anthracnose (Colletotrichum spp.) Cercospora leaf spot (Cercospora spp.) Powdery mildew (Erysiphe spp.) Rust (Puccinia spp.)

3.2-8.0 (0.1-0.25) 1.6-4.0 (0.1-0.25) 0.08-0.18 Resistance Management: Follow the resistance management guidelines in the Resistance Management section. Do not apply more than two sequential applications of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11.

Begin Heritage Fungicide applications prior to disease development and continue throughout the disease development period on a 10- to 14-day schedule, following the resistance management guidelines. Applications may be made by ground, air or chemigation. An adjuvant may be added at specified rates. Specific Use Restrictions: • Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. • May be applied the day of harvest (0-day PHI).

Heritage Fungicide Page 54 VEGETABLE AND HERB PLANTS

RESTRICTION: Apply to vegetable and herb plants grown for retail sale to consumers only.

TABLE 27: Specific Use Directions for Asparagus Plants Crop Target Diseases Use Rate oz product/ 1,000 sq ft Use Rate oz product/ 5,000 sq ft Application Instructions Asparagus Stemphyllium purple spot (Stemphyllium vesicarium) 0.075-0.18

0.375-0.9 Resistance Management: Do not apply more than one application of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11.

Begin Heritage Fungicide applications prior to disease development and continue throughout plant production on a 7- to 14-day schedule, following the resistance management guidelines. Applications may be made by foliar sprays, including chemigation. An adjuvant may be added at specified rates. Use a minimum of 10 gallons of water per acre. Specific Use Restrictions: • Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. • Do not apply within 100 days of harvest (100-day PHI). • A use rate of 0.18 oz product/1,000 sq ft is equal to 0.25 lb ai/A.

Heritage Fungicide Page 55 TABLE 28: Specific Use Directions for Brassica Head and Stem Subgroup Plants Crop Target Diseases Use Rate oz product/ 1,000 sq ft (lb ai/A) Use Rate oz product/ 5,000 sq ft Application Instructions Brassica Head and stem subgroup

Broccoli Chinese broccoli [gai lon] Brussels sprouts Cabbage Chinese cabbage [napa] Chinese mustard cabbage [gai choy] Cauliflower Cavalo broccolo Kohlrabi

including all cultivars and/or hybrids of these Alternaria leaf spot (Alternaria spp.) Downy mildew (Peronospora parasitica) Pin rot (Alternaria spp.) 0.08-0.18 (0.1-0.25) 0.4-0.9 Resistance Management: Do not apply more than one application of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11.

Begin Heritage Fungicide applications prior to disease development and continue throughout plant production on a 7- to 14-day schedule, following the resistance management guidelines.

Applications may be made by foliar sprays including chemigation. An adjuvant may be added at specified rates. Use a minimum of 10 gallons of water per acre. Specific Use Restrictions: • Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. • May be applied the day of harvest (0-day PHI).

Heritage Fungicide Page 56 TABLE 29: Specific Use Directions for Brassica Leafy Greens Subgroup Plants Crop Target Diseases Use Rate oz product/ 1,000 sq ft (lb ai/A) Use Rate oz product/ 5,000 sq ft Application Instructions Brassica Leafy greens subgroup

Broccoli raab Cabbage, Chinese Collards Kale Mizuna Mustard greens Mustard spinach Rape greens

including all cultivars and/or hybrids of these

Black spot (Alternaria spp.) Cercospora leaf spot (Cercospora spp.) White rust (Albugo candida)

0.08-0.18 (0.1-0.25) 0.4-0.9 Resistance Management: Follow the resistance management guidelines in the Resistance Management section. Do not apply more than one application of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11.

Begin Heritage Fungicide applications prior to disease development and continue throughout plant production on a 7- to 14-day schedule, following the resistance management guidelines.

Applications may be made by foliar sprays including chemigation. An adjuvant may be added at specified rates. Use a minimum of 10 gallons of water per acre. Specific Use Restrictions: • Do not apply more than 0.75 lb ai/A per year of azoxystrobin-containing products. • May be applied the day of harvest (0-day PHI).

Heritage Fungicide Page 57 TABLE 30: Specific Use Directions for Bulb Vegetable Plants Crop Target Diseases Use Rate oz product/ 1,000 sq ft (lb ai/A) Use Rate oz. product/ 5,000 sq ft Application Instructions Bulb Vegetables

Garlic Leek Onion, bulb Onion, green Welsh onion Shallot Foliar Diseases Cladosporium leaf blotch (Cladosporium allii) Purple blotch (Alternaria porri) Rust (Puccinia allii) White rot (Sclerotium cepivorum) 0.08-0.15 (0.1-0.20) 0.4-0.75 Resistance Management: Do not apply more than one application of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11.

For downy mildew, make preventative applications on a 5- to 7-day schedule. For all other diseases, begin Heritage Fungicide applications prior to disease development and continue throughout plant production every 7-14 days, following the resistance management guidelines.

Applications may be made by foliar sprays including chemigation. An adjuvant may be added at specified rates.

Mixtures of Heritage Fungicide with insecticides and silicone adjuvants should be tested for crop safety before application to the crop. Botrytis leaf blight (Botrytis aclada) Downy mildew (Peronospora destructor)

0.11-0.18 (0.15-0.25) 0.55-0.9 Specific Use Restrictions: • Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. • May be applied the day of harvest (0-day PHI).

Heritage Fungicide Page 58 TABLE 31: Specific Use Directions for Celery Plants Crop Target Diseases Use Rate oz product/ 1,000 sq ft (lb ai/A) Use Rate oz product/ 5,000 sq ft Application Instructions Celery Early blight (Cercospora apii) Late blight (Septoria apicola)

For additional diseases, see Leafy Vegetables. 0.11-0.18 (0.15-0.25) 0.55-0.9 Resistance Management: Do not apply more than one application of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11.

Begin Heritage Fungicide applications prior to disease development and continue throughout plant production every 7- 14 days, following the resistance management guidelines.

Applications may be made by foliar sprays including chemigation. An adjuvant may be added at specified rates. Specific Use Restrictions: • Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. • May be applied the day of harvest (0 day PHI).

Heritage Fungicide Page 59 TABLE 32: Specific Use Directions for Cucurbit Plants

Crop Target Diseases Use Rate oz product/ 1,000 sq ft (lb ai/A) Use Rate oz product/ 5,000 sq ft Application Instructions Cucurbits

Cantaloupe Chayote Chinese- waxgourd Cucumber Gourds Honeydew Melons Momordica spp. (bitter melon, balsam apple) Muskmelon Watermelon Pumpkin Squash Zucchini

including cultivars and/or hybrids of these Anthracnose (Colletotrichum lagenarium) Belly Rot (Rhizoctonia solani) Downy Mildew (Pseudoperonospora cubensis) Gummy Stem Blight (Didymella bryoniae) Leaf spots (Alternaria spp., Cercospora spp.) Myrothecium canker (Myrothecium roridum) Plectosporium blight (Plectosporium tabacinum) Powdery Mildew (Podosphaera xanthii,

Erysiphe cichoracearum) Ulocladium leaf spot (Ulocladium cucurbitae)

0.08-0.18 (0.10-0.25) 0.4-0.9 Resistance Management: Do not apply more than one application of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11. Do not make more than four (4) foliar applications of Heritage Fungicide or other Group 11 fungicides per crop per acre per year.

For both downy and powdery mildew, make preventative applications on a 5- to 7-day schedule. For belly rot control, make the first application at the 1- to 3-leaf crop stage with a second application just prior to vine tip over or 10-14 days later, whichever occurs first. For all other diseases, begin Heritage Fungicide applications prior to disease development and continue throughout plant production every 7-14 days, following the resistance management guidelines.

Applications may be made by foliar sprays, including chemigation.

An adjuvant may be added at specified rates. However, do not tank-mix Heritage Fungicide with COC, MSO or silicon adjuvants.

Do not tank-mix Heritage Fungicide with malathion, methomyl, potassium laurate, or dicloran containing products. Specific Use Restrictions: • Do not apply more than 1.5 lb ai/A per year of azoxystrobin -containing products.

Heritage Fungicide Page 60

TABLE 33: Specific Use Directions for Herb and Spice Plants Crop Target Diseases Use Rate oz product/ 1,000 sq ft (lb ai/A) Use Rate oz product/ 5,000 sq ft Application Instructions Herbs & Spices (except basil and black pepper) Allspice; Angelica; Anise (seed); Anise, star; Annatto; Balm; Borage; Burnet; Camomile; Caper (buds); Caraway; Caraway, black; Cardamom; Cassia (buds); Catnip; Celery seed; Chervil (dried); Chive; Chive, Chinese; Cinnamon; Clary; Clove (buds); Coriander (cilantro or Chinese parsley) (leaf); Coriander (seed); Costmary; Culantro (leaf and seed); Cumin; Curry (leaf); Dill (seed); Dillweed; Fennel, common; Fennel, Florence (seed); Fenugreek; Grains of paradise; Horehound; Hyssop; Juniper (berry); Lavender; Lemongrass; Lovage (leaf and seed); Mace; Marigold; Marjoram; Mustard (seed), Nasturtium; Nutmeg; Oregano; Parsley (dried); Pennyroyal; Pepper, white; Poppy seed; Rosemary; Rue; Saffron; Sage; Savory, summer and winter; Sweet bay; Tansy; Tarragon; Alternaria leafspot (Alternaria spp.) Corynespora blight (Corynespora cassiicola) Downy mildew (except Basil) (Plasmopara spp., Peronospora spp.) Dill blight (Cercosporidium punctum) Phoma blight (Passalora puncta) Powdery mildew (Erysiphe spp., Podosphaera spp.)

0.08-0.18 (0.1-0.25) 0.4-0.9 Resistance Management: Do not apply more than two sequential applications of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11.

Begin Heritage Fungicide applications at the onset of disease development and continue throughout plant production on a 7- day schedule, following the resistance management guidelines.

Applications may be made by foliar sprays. An adjuvant may be added at specified rates. Use a minimum of 30 gallons of water per acre. • Do not apply within 1 day of harvest (1-day PHI).

Heritage Fungicide Page 61 Thyme; Vanilla; Wintergreen; Woodruff; Wormwood Specific Use Restrictions: • Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. • May be applied the day of harvest (0-day PHI). • Do not apply by aerial application.

Heritage Fungicide Page 62 TABLE 34: Specific Use Directions for Basil Plants Crop Target Diseases Use Rate oz product/ 1,000 sq ft (lb ai/A) Use Rate oz product/ 5,000 sq ft Application Instructions Basil Downy mildew (Peronospora belbahrii)

0.18 (0.25) 0.9 Plug Production*: Apply to emerged plants in plug production trays prior to disease development. Apply uniformly to foliage using a minimum of 3.4 gallons of water/5,000 sq ft (30 gallons/A). Make no more than one application during the plug production phase. Follow the Heritage Fungicide application with alternative chemistries on a weekly schedule, implementing a preventative integrated disease management program.

Finish Production**: Apply to plants following transplant of plugs to trays, pots or containers in which plants are grown to finish. Apply uniformly to foliage using a minimum of 3.4 gallons of water/5,000 sq ft (30 gallons/A). Make no more than one application during the finish production phase. Follow the Heritage Fungicide application with alternative chemistries on a weekly schedule, implementing a preventative integrated disease management program. For specific resistance management programs, contact your state Extension specialist.

Specific Use Restrictions: • Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. • May be applied the day of harvest (0-day PHI).

• Plug production refers to the production of a young plant grown from seed in a multi -celled germination tray for a short period of time. After growing to a desired size, the plug is then transplanted in a larger pot or container to grow to a larger size suitable to sell. ** Finish production refers to the production of a finished plant grown to a desired size suitable to sell in a garden center, large format retailer, or other retailers selling plants to consumers for home and garden plantings.

Heritage Fungicide Page 63 TABLE 35: Specific Use Directions for Leafy Vegetable Plants (except Brassica)

Crop Target Diseases Use Rate oz product/ 1,000 sq ft (lb ai/A) Use Rate oz product/ 5,000 sq ft Application Instructions Leafy Vegetables (except Brassica)

Amaranth Arugula Cardoon Celery Celtuce Chervil Chrysanthemum, edible Coriander, leaves (Cilantro) Corn salad Cress Dandelion Dock Endive Fennel Lettuce, head and leaf Orach Parsley Purslane Radicchio Rhubarb Spinach Swiss Chard

including cultivars and/or hybrids of these Foliar Diseases Alternaria leaf spot (Alternaria sonchi, A. spp.) Anthracnose (Microdochium panattonianum, Colletotrichum dematium) Cercospora leaf spot (Cercospora spp.) Septoria leaf spot (Septoria petroselini) White rust (Albugo occidentalis) 0.08-0.18 (0.1-0.25) 0.4-0.9 Resistance Management: Do not apply more than one application of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11.

For both downy and powdery mildew, make preventative applications on a 5- to 7-day schedule. For all other diseases, begin Heritage Fungicide applications prior to disease development and continue throughout plant production every 7-14 days following the resistance management guidelines.

Applications may be made by foliar sprays including chemigation. An adjuvant may be added at specified rates.

ATTENTION: Applications of Heritage Fungicide to leafy vegetable foliage have contributed to phytotoxicity under certain circumstances. Proceed with caution with regard to tank mixes and adjuvants when treating all leafy vegetables with Heritage Fungicide. Heritage Fungicide must not be tank- mixed on leaf lettuce with permethrin, fosetyl-al, lambda-cyhalothrin, or another product that may increase the penetration of Heritage Fungicide into the Downy mildew (Bremia lactucae) Powdery mildew (Eyrisiphe cichoracearum) 0.15-0.18 (0.2-0.25) 0.75-0.9

Heritage Fungicide Page 64

TABLE 36: Specific Use Directions for Mint Plants Crop Target Diseases Use Rate oz product/ 1,000 sq ft (lb ai/A) Use Rate oz product/ 5,000 sq ft Application Instructions Mint (Fresh) Powdery mildew (Erysiphe spp.) Rust (Puccinia menthae)

0.08-0.18 (0.1-0.25) 0.4-0.9 Resistance Management: Do not apply more than two sequential applications of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11.

Begin Heritage Fungicide applications prior to disease development and continue throughout plant production on a 7- to 10-day schedule, following the resistance management guidelines.

Applications may be made by foliar sprays including chemigation. An adjuvant may be added at specified rates. Specific Use Restrictions: • Do not apply more than 0.75 lb ai/A per year of azoxystrobin-containing products. • For fresh mint, may be applied the day of harvest (0-day PHI).

leaf surface, such as, but not limited to, silicone wetters. Specific Use Restrictions: • Do not apply more than 1.5 lb ai/A per year of azoxystrobin-containing products. • May be applied the day of harvest (0-day PHI).

Heritage Fungicide Page 65 TABLE 37: Specific Use Directions for Pepper and Other Fruiting Vegetable Plants (except Cucurbits) Crop Target Diseases Use Rate oz product/ 1,000 sq ft (lb ai/A) Use Rate oz product/ 5,000 sq ft Application Instructions Peppers and other Fruiting Vegetables (except cucurbits) Bell Pepper Non-Bell Pepper Sweet Non- Bell Pepper Eggplant Groundcherry Okra Pepino Tomatillo

See specific directions for use for Tomatoes. Anthracnose (Colletotrichum spp.) Cercospora leaf spot (Cercospora capsici) Downy mildew (Peronospora tabacini) Powdery mildew Leveillula taurica 0.08-0.18 (0.1-0.25)

0.4-0.9

Resistance Management: Follow the resistance management guidelines in the Resistance Management section. Do not apply more than one application of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11.

Begin Heritage Fungicide applications prior to disease development and continue throughout plant production on a 7- to 14-day schedule, following the resistance management guidelines.

Applications may be made by foliar sprays including chemigation. An adjuvant may be added at specified rates. Specific Use Restrictions: • Do not apply more than 1.0 lb ai/A per year of azoxystrobin-containing products. • May be applied the day of harvest (0-day PHI).

Heritage Fungicide Page 66 TABLE 38: Specific Use Directions for Tomato Plants Crop Target Diseases Use Rate oz product/1,000 sq ft (lb ai/A) Use Rate oz product/ 5,000 sq ft Application Instructions Tomatoes Anthracnose (Colletotrichum coccodes) Black Mold (Alternaria alternata) Buckeye Rot (Phytophthora spp.) Early Blight (Alternaria solani) Powdery Mildew Leveillula tauricaSeptoria Leaf spot (Septoria lycopersici) Target spot (Corynespora cassiicola) 0.024-0.08 (0.08-0.10) 0.12-0.4 Resistance Management: Do not apply more than one application of Heritage Fungicide or other Group 11 fungicides before alternation with a fungicide that is not in Group 11.

Begin Heritage Fungicide applications prior to disease development and continue throughout plant production following the resistance management guidelines. For late blight, apply Heritage Fungicide at 5- to 7-day intervals. For all other tomato diseases, apply Heritage Fungicide on 7- to 21-day intervals.

Applications may be made by foliar sprays including chemigation.

Under certain environmental conditions (particularly high temperatures), Heritage Fungicide in combination with high rates of silicone- containing or oil-containing (petroleum or crop) additives or adjuvants may cause injury. Do not exceed 0.125% adjuvant (v/v). Consult a Syngenta representative for more information concerning additives or adjuvants.

A tank mixture with dimethoate may cause crop injury.

Do not use adjuvants or tank mix Heritage Fungicide with any emulsifiable concentrate (EC) product. Late Blight (Phytophthora infestans) 0.08 (0.10) 0.4 Specific Use Restrictions:

Heritage Fungicide Page 67 • Do not apply Heritage Fungicide until 35 days after seeding or 21 days after transplanting plugs to larger pots or containers. • Do not apply more than 0.6 lb ai/A per year of azoxystrobin-containing products. • May be applied the day of harvest (0-day PHI).

TABLE 39: Heritage Rate Conversion Chart (For use with 4 oz package size only)

oz product/A oz product/ 1,000 sq ft Treated Acres/ 4 oz product 1.0 0.025 4.0 1.5 0.035 2.7 2.0 0.05 2.0 2.5 0.06 1.6 3.0 0.07 1.3 3.5 0.08 1.1 4.0 0.09 1.0 4.5 0.1 0.9 5.0 0.11 0.8 5.5 0.13 0.73 6.0 0.14 0.67 6.5 0.15 0.62 7.0 0.16 0.57 7.5 0.17 0.53 8.0 0.18 0.5 8.7 0.2 0.46 13.1 0.3 0.31 17.4 0.4 0.23

Heritage Fungicide Page 68

STORAGE AND DISPOSAL

Do not contaminate water, food, or feed by storage or disposal.

Pesticide Storage Store in original containers only. Keep container closed when not in use. Do not store near food or feed. In case of spill on floor or paved surfaces, sweep and remove to chemical waste storage area until proper disposal can be made if product cannot be used according to the label.

Pesticide Disposal Pesticide wastes are acutely hazardous. Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of Federal law. If these wastes cannot be disposed of by use according to label instructions, contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste representative of the nearest EPA Regional Office for guidance.

Container Handling [(less than or equal to 50 pounds)] Non-refillable container. Do not reuse or refill this container. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container ¼ full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures approved by state and local authorities.

Container Handling [(bags)] Non-refillable container. Do not reuse or refill this container. Completely empty bag into application equipment. Then offer for recycling if available or dispose of empty bag in a sanitary landfill, or by incineration, or by other procedures approved by state and local authorities.

CONTAINER IS NOT SAFE FOR FOOD, FEED, OR DRINKING WATER.

Heritage®, the ALLIANCE FRAME the SYNGENTA Logo and the PURPOSE ICON are Trademarks of a Syngenta Group Company.

©20XX Syngenta

For non-emergency (e.g., current product information), call Syngenta Crop Protection at 1-866-796-4368.

Heritage Fungicide Page 69

Manufactured for: Syngenta Crop Protection, LLC P. O. Box 18300 Greensboro, North Carolina 27419-8300

Heritage Fungicide 1093 MAS 0316 AMEND-E 0519-CL – jab- 7/23/25 000100-01093.20190515E.HERITAGE FUNGICIDE.AMEND.MAY2019-CL