crop-chem-docs/corpus/epa_ppls/100-1185.md

SEQUENCE HERBICIDE

• EPA Reg No: 100-1185
• Registrant: SYNGENTA CROP PROTECTION, LLC
• Signal word: Caution
• Active ingredients: S-Metolachlor (29%); Glyphosate (21.8%)
• Label accepted: 2024-10-08
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000100-01185-20241008.pdf

---

October 08, 2024 Jordan Moseley jordan.moseley@syngenta.com SYNGENTA CROP PROTECTION, LLC Subject: Non-PRIA (Pesticide Registration Improvement Act) Labeling Amendment - Correction of rate conversion error and minor label updates Product Name: SEQUENCE HERBICIDE Admin Number: 100-1185 EPA Receipt Date: 08/14/2024 Action Case Number: 00626268 Dear Jordan Moseley: The amended labeling referred to above, submitted in connection with registration under the Federal Insecticide, Fungicide, and Rodenticide Act, as amended, is acceptable. This approval does not affect any terms or conditions that were previously imposed on this registration. You continue to be subject to existing terms or conditions on your registration and any deadlines connected with them. A stamped copy of your labeling is enclosed for your records. This labeling supersedes all previously accepted labeling. You must submit one (1) copy of the final printed labeling before you release this product for shipment with the new labeling. In accordance with 40 CFR § 152.130(c), you may distribute or sell this product under the previously approved labeling for 18 months from the date of this letter. After 18 months, you may only distribute or sell this product if it bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR § 152.3. Should you wish to add/retain a reference to your company’s website on your label, then please be aware that the website becomes labeling under FIFRA and is subject to review by EPA. If the website is false or misleading, the product will be considered to be misbranded and sale or distribution of the product is unlawful under FIFRA section 12(a)(1)(E). 40 CFR § 156.10(a)(5) lists examples of statements the EPA may consider false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims made on the website may not substantially differ from those claims approved through the registration process. Therefore, should the EPA find or if it is brought to our attention that a website contains statements or claims substantially differing from statements or claims made in connection with obtaining a FIFRA section 3 registration, the website will be referred to the EPA’s Office of Enforcement and Compliance Assurance. Your release for shipment of this product constitutes acceptance of these terms. If these terms are not complied with, this registration will be subject to cancellation in accordance with FIFRA section 6.

If you have questions, please contact Margaret Golembiewski via email at golembiewski.margaret@epa.gov. Sincerely, Kable Bo Davis, Senior Advisor HB, RD Office of Pesticide Programs Kable Bo Davis

Sequence Herbicide Page 1 Sale, use and distribution of this product in Nassau and Suffolk Counties in the State of New York is prohibited. GLYPHOSATE GROUP 9 HERBICIDE S-METOLACHLOR GROUP 15 HERBICIDE Sequence® Herbicide Foliar systemic herbicide with residual weed control for corn, cotton, legume vegetables (succulent or dried), peanuts, potatoes, sorghum, soybeans, sugar beet (glyphosate resistant), sunflowers, and tomatoes Active Ingredients: Glyphosate*:.............................................................................................................21.8% S-metolachlor**:........................................................................................................29.0% Other Ingredients: 49.2% Total: 100.0% *CAS No. 1071-83-6 **CAS No. 87392-12-9 Sequence® Herbicide is formulated as an emulsion in water (EW) and contains 2.25 pounds of glyphosate acid and 3 pounds of S-metolachlor per gallon. KEEP OUT OF REACH OF CHILDREN CAUTION/PRECAUCIÓN Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand the label, find someone to explain it to you in detail.) See additional precautionary statements and directions for use [inside booklet][on label]. EPA Reg. No. 100-1185 EPA Est. SCP 1185A

---

Net Contents [Batch Code: _____] (For nonrefillables only.) 10/08/2024 100-1185

Sequence Herbicide Page 2

TABLE OF CONTENTS

1.0 FIRST AID 2.0 PRECAUTIONARY STATEMENTS 2.1 Hazards to Humans and Domestic Animals 2.2 Personal Protective Equipment (PPE) 2.2.1 User Safety Requirements 2.2.2 Engineering Controls 2.2.3 User Safety Recommendations 2.3 Environmental Hazards 2.3.1 Groundwater Advisory 2.3.2 Surface Water Advisory 2.3.3 Non-Target Organism Advisory 2.3.4 Reporting Ecological Incidents 2.3.5 Mixing/Loading Restrictions 2.4 Physical or Chemical Hazards

DIRECTIONS FOR USE

3.0 PRODUCT INFORMATION 3.1 Weed Resistance Management 3.1.1 Principles of Herbicide Resistant Weed Management 4.0 APPLICATION DIRECTIONS 4.1 Methods of Application 4.2 Application Equipment 4.3 Application Volume and Spray Coverage 4.4 Mixing Directions 4.4.1 Sequence Herbicide Alone 4.4.2 Tank-Mix Precautions 4.4.3 Tank-Mix Compatibility Test 4.4.4 Sequence Herbicide in Tank Mixtures 4.4.5 Spray Additives 5.0 REPLANT AND ROTATIONAL CROP 5.1 Replant and Rotational Crop Restrictions 6.0 COVER CROPS 6.1 Field Bioassay for Cover Crops 7.0 RESTRICTIONS AND PRECAUTIONS 7.1 Use Restrictions 7.2 Use Precautions 7.3 MANDATORY SPRAY DRIFT MANAGEMENT 7.3.1 Aerial Spray Drift Management 7.3.2 Ground Boom Applications 7.3.3 Boomless Ground Application 7.4 SPRAY DRIFT ADVISORIES 7.4.1 Importance of Droplet Size 7.4.2 Controlling Droplet Size – Ground Boom 7.4.3 Boomless Ground Application 7.4.4 Handheld Technology Applications

Sequence Herbicide Page 3

7.4.5 Controlling Droplet Size – Aircraft 7.4.6 BOOMHEIGHT – Ground Boom 7.4.7 RELEASE HEIGHT - Aircraft 7.4.8 SHIELDED SPRAYERS 7.4.9 Swath Adjustment 7.4.10 TEMPERATURE AND HUMIDITY 7.4.11 Temperature Inversions 7.4.12 Wind 7.4.13 Sensitive Areas 8.0 WEEDS CONTROLLED OR PARTIALLY CONTROLLED BY SEQUENCE HERBICIDE 8.1 Annual Weed Control for Sequence Herbicide Used Alone 8.2 Annual Weed Control – Sequence Herbicide Rates in a Tank- Mix with Dicamba or 2,4-D 8.3 Perennial Weed Control – Sequence Herbicide Rates Used Alone or in Tank-Mix with Dicamba or 2,4-D 9.0 CROP USE DIRECTIONS 9.1 Corn 9.1.1 Preplant or Preemergence Application 9.1.2 Postemergence Application on Glyphosate-Resistant Corn 9.1.3 Tank-Mix Combinations for Corn 9.2 Cotton 9.2.1 Preplant or Preemergence Application 9.2.2 Postemergence Over-The-Top Application on Glyphosate-Resistant Cotton Only (such as Roundup Ready Flexx cotton) 9.2.3 Postemergence Over-The-Top Application on Glyphosate-Resistant Cotton 9.2.4 Tank-Mix Combinations for Cotton 9.3 Legume Vegetables (Succulent or Dried), Crop Group 6, Except Soybean 9.3.1 Preplant or Preemergence Application 9.3.2 Tank-Mix Combinations for Legume Vegetables 9.4 Peanut

9.5 Potato 9.5.1 Preplant or Preemergence Application 9.5.2 Tank-Mix Combinations for Potato 9.6 Sorghum 9.6.1 Preplant or Preemergence Application 9.6.2 Tank-Mix Combinations for Sorghum 9.7 Soybeans 9.7.1 Fall, Preplant or Preemergence Application 9.7.2 Postemergence Over-The-Top Application on Glyphosate Resistant Soybeans 9.7.3 Tank-Mix Combinations for Soybeans 9.8 Sugar Beet 9.8.1 Postemergence Application Over-The-Top Application on Glyphosate Resistant Sugar Beet 9.9 Sunflower 9.9.1 Preplant or Preemergence Application

Sequence Herbicide Page 4

9.9.2 Tank-Mix Combinations for Sunflower 9.10 Tomato 9.10.1 Transplanted 9.10.2 Tank-Mix Combinations for Transplanted Tomato 10.0 STORAGE AND DISPOSAL 11.0 CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY 12.0 APPENDIX 12.1 Tank-Mix Partner Table 12.2 Sequence Herbicide Use Summary Table [Optional Text]

Sequence Herbicide Page 5

1.0 FIRST AID FIRST AID If on skin or clothing x Take off contaminated clothing. x Rinse skin immediately with plenty of water for 15-20 minutes. x Call a poison control center or doctor for treatment advice. If in eyes x Hold eye open and rinse slowly an d gently with water for 15-20 minutes. x Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. x Call a poison control center or doctor for treatment advice. If inhaled x Move person to fresh air. x If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth-to-mouth, if possible. x Call a poison control center or doctor for further treatment advice. If swallowed x Call a poison control center or doctor immediately for treatment advice. x Have a person sip a glass of water if able to swallow. x Do not induce vomiting unless told to by a poison control center or doctor. x Do not give anything by mouth to an unconscious person. Have the product container or label with you when calling a poison control center or doctor or going for treatment. HOTLINE NUMBER For 24-Hour Medical Emergency Assistance (Human or Animal) Or Chemical Emergency Assistance (Spill, Leak, Fire or Accident) Call 1-800-888-8372

2.0 PRECAUTIONARY STATEMENTS 2.1 Hazards to Humans and Domestic Animals

CAUTION/PRECAUCIÓN

Avoid contact with skin or clothing. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet. Remove and wash contaminated clothing before reuse.

2.2 Personal Protective Equipment (PPE) Mixers, Loaders, applicators and other handlers must wear: x Long-sleeved shirt and long pants

Sequence Herbicide Page 6

x Chemical-resistant gloves made of barrier la minate, butyl rubber >14 mils, nitrile rubber

14 mils, neoprene rubber >14 mils, natural rubber >14 mils, polyethylene, polyvinyl chloride (PVC) >14 mils, or VitonTM >14 mils x Shoes plus socks

2.2.1 User Safety Requirements Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry.

2.2.2 Engineering Controls Mixers and loaders supporting aerial applications are required to use closed systems. The closed system must be used in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides. When using the closed system, the mixers’ and loaders’ PPE requirements may be reduced or modified as specified in the WPS.

When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides, the handler PPE requirements may be reduced or modified as specified in the WPS.

2.2.3 User Safety Recommendations User Safety Recommendations Users should: x Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. x Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing.

2.3 Environmental Hazards Do not apply directly to water, or to areas where surface water is present, or to intertidal areas below the mean high water mark. Do not contaminate water when cleaning equipment or disposing of equipment wash waters.

2.3.1 Groundwater Advisory S-metolachlor is known to leach through soil into groundwater under certain conditions as a result of label use. This chemical may leach into groundwater if used in areas where soils are permeable, particularly where the water table is shallow.

Sequence Herbicide Page 7

2.3.2 Surface Water Advisory This product may impact surface water quality due to runoff of rainwater or through ground spray drift. This product may impact surface water quality due to runoff of rain water. This is especially true for poorly draining soils and soils with shallow ground water. This product is classified as having high potential for reaching surface water via runoff for several weeks or months after application. A level, well-maintained vegetative buffer strip between areas to which this product is applied and surface water features such as ponds, streams, and springs will reduce the potential loading of S-metolachlor from runoff water and sediment. Runoff of this product will be reduced by avoiding applications when rainfall or irrigation is expected to occur within 48 hours.

2.3.3 NON-TARGET ORGANISM ADVISORY This product is toxic to plants and may adversely impact the forage and habitat of non-target organisms, including pollinators, in areas adjacent to the treated site. Protect the forage and habitat of non-target organisms by following label directions intended to minimize spray drift.

2.3.4Reporting Ecological Incidents

To report ecological incidents, including mortality, injury, or harm to plants and animals, call 1-800-888-8372.

2.3.5 Mixing/Loading Restrictions Care must be taken when using this product to prevent back-siphoning into wells, spills, or improper disposal of excess pesticide, spray mixtures, or rinsates. Check-valves or anti- siphoning devices must be used on all mixing and/or irrigation equipment. x This product must not be mixed or loaded with in 50 ft of perennial or intermittent streams and rivers, natural or impounded lakes and reservoirs. x This product must not be mixed/loaded or used within 50 ft of all wells, including abandoned wells, drainage wells, and sink holes. x Operations that involve mixing, loading, rinsin g, or washing of this product into or from pesticide handling or application equipment or containers within 50 ft of any well are prohibited, unless conducted on an impervious pad constructed to withstand the weight of the heaviest load that may be positioned on or moved across the pad. o Such a pad shall be designed and maintained to contain any product spills or equipment leaks, container or equipment rinse or wash water, and rain water that may fall on the pad. o Surface water shall not be allowed to eit her flow over or from the pad, which means the pad must be self-contained. o The pad shall be sloped to facilitate material removal. o An unroofed pad shall be of sufficient c apacity to contain at a minimum 110% of the capacity of the largest pesticide container or application equipment on the pad. o A pad that is covered by a roof of suffic ient size to completely exclude precipitation from contact with the pad shall have a minimum containment capacity of 100% of the capacity of the largest pesticide container or application equipment on the pad. x Containment capacities as described above shall be maintained at all times. The above-specified minimum containment capacities do not apply to vehicles when delivering pesticide shipments to the mixing/loading site.

Sequence Herbicide Page 8

2.4 Physical or Chemical Hazards Do not store, mix or apply this product or spray solutions of this product in unlined steel (except stainless steel), aluminum, galvanized steel containers, or sprayer tanks. This product or spray solutions of this product will react with these containers and tanks and produce hydrogen gas that may form a highly combustible mixture. This gas mixture could flash or explode, causing serious personal injury, if ignited by spark, open flame, lighted cigarette, welder torch, or other ignition source.

Mix, store and apply spray solutions of this product using only stainless steel, fiberglass, plastic, or plastic-lined steel containers.

DIRECTIONS FOR USE

It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.

Endangered Species Protection Requirements

It is a Federal offense to use any pesticide in a manner that results in an unauthorized “take” (e.g., kill or otherwise harm) of an endangered species and certain threatened species, under the Endangered Species Act section 9. When using this product, you must follow the measures contained in the Endangered Species Protection Bulletin for the area in which you are applying the product. You must obtain a Bulletin no earlier than six months before using this product. To obtain Bulletins, consult http://www.epa.gov/espp/, call 1-844-447-3813, or email ESPP@epa.gov. You must use the Bulletin valid for the month in which you will apply the product.

Use Sequence Herbicide only in accordance with specifications on this label or in separately EPA approved labeling instructions for this product.

Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation.

FAILURE TO FOLLOW DIRECTIONS AND PRECAUTIONS ON THIS LABEL MAY RESULT IN CROP INJURY, POOR WEED CONTROL, AND/OR ILLEGAL RESIDUES.

AGRICULTURAL USE REQUIREMENTS

Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard (WPS).

Sequence Herbicide Page 9

Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 24 hours.

PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is:

x Coveralls x Chemical- resistant gloves made of barrier laminate, butyl rubber ≥14 mils, nitrile rubber ≥14 mils, neoprene rubber ≥14 mils, natural rubber ≥14 mils, polyethylene, polyvinyl chloride (PVC) ≥14 mils, or Viton ≥14 mils x Shoes plus socks

3.0 PRODUCT INFORMATION Sequence Herbicide is a foliar systemic herbicide which may be applied to control a broad spectrum of actively growing emerged weeds. Annual weeds of 6 inches or less in height are typically the easiest to control. It will also provide residual control of many grass and small seeded broadleaf weeds, in:

x Corn (preplant/preemergence to all corn, postemergence to glyphosate resistant corn) x Cotton (preplant/preemergence to all cotton, postemergence to glyphosate resistant cotton) x Legume vegetables -- succulent or dried (preplant and preemergence) x Peanut (preplant and preemergence) x Sorghum (preplant and preemergence) x Soybean, (preplant/preemergence to all soyb eans; postemergence to glyphosate resistant soybeans) x Sugar beet, (postemergence to glyphosate-resistant sugar beet) x Sunflower (preplant and preemergence) x Tomato – transplanted (preplant)

This product needs to be activated with either rainfall or irrigation to provide residual control of certain weeds. If rainfall or irrigation is not received within 7 days after application, residual weed control may be reduced. Under these conditions, cultivate or use other weed control measures if weeds develop.

This product is especially useful in no-till, minimum-tillage, and reduced-tillage cropping systems.

Severe damage or destruction may be caused by contact of this product to any vegetation (including leaves, green stems, exposed non-woody roots, or fruit) of crops, trees, and other desirable plants to which treatment is not intended, except as specified for glyphosate resistant crops. Drift may cause damage to any non-target vegetation.

Sequence Herbicide Page 10

3.1 Weed Resistance Management

GLYPHOSATE GROUP 9 HERBICIDE S-METOLACHLOR GROUP 15 HERBICIDE

Sequence Herbicide contains glyphosate which inhibits 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS, Site of Action Group 9) and S-metolachlor which inhibits very long chain fatty acid (VLCFA) synthesis (Site of Action Group 15). Some naturally occurring weed populations have been identified as resistant to Group 9 and/or Group 15 herbicides. Selection of resistant biotypes, through repeated use of these herbicides or lower than labeled use rates in the same field, may result in weed control failures. A resistant biotype may be present where poor performance cannot be attributed to adverse environmental conditions or improper application methods. If resistance is suspected, contact your local Syngenta representative and/or agricultural advisor for assistance.

3.1.1 Principles of Herbicide Resistant Weed Management Scout and know your field • Know weed species present in the field to be treated through scouting and field history. An understanding of weed biology is useful in designing a resistance management strategy. Ensure the weed management program will control all weeds present. • Fields should be scouted prior to application to determine species present and growth stage. Always apply this herbicide at the full labeled rate and correct timing for the weeds present in the field. Utilize non-herbicidal practices to add diversity • Use diversified management tactics such as cover crops, mechanical weed control, harvest weed seed control, and crop rotation as appropriate. Use good agronomic practices, start clean and stay clean • Use good agronomic practices that enhance crop competitiveness. • Plant into weed-free fields ut ilizing tillage or an effective burndown herbicide for control of emerged weeds. • Sanitize farm equipment to avoid spreading seed or vegetative propagules prior to leaving fields. Difficult to control weeds • Fields with difficult to control weeds should be planted in rotation with crops that allow the use of herbicides with an alternative mode of action or different management practices. • Difficult to control weeds may require sequential applications, such as a broad spectrum preemergence herbicide followed by one or more postemergence herbicide applications. Utilize herbicides containing different modes of action effective on the target weeds in sequential applications.

Sequence Herbicide Page 11

Do not overuse the technology • Do not use more than two applications of th is or any other herbicide with the same mode of action in a single growing season unless mixed with an herbicide with a different mode of action which provides overlapping spectrum for the difficult to control weeds. Scout and inspect fields following application • Prevent an influx of weeds into the fi eld by controlling weeds in field borders. • Scout fields after application to verify that the treatment was effective.

• Suspected herbicide resistant weeds ma y be identified by these indicators o Failure to control a weed species normally controlled by the herbicide at the dose applied, especially if control is achieved on adjacent weeds; o A spreading patch of non-controlled plan ts of a particular weed species; and o Surviving plants mixed with controll ed individuals of the same species. • Report non-performance of this product to your Syngenta retailer, Syngenta representative, or call 1-866-Syngent(a) (866-796-4368). If resistance is suspected ensure weed escapes are controlled using an herbicide with an effective mode of action and/or use non-chemical means to prevent further seed production. Prevent weed escapes before, during, and after harvest • Do not allow weed escapes to produce seed or vegetative structures such as tubers or stolons which contribute to spread and survival. Consider harvest weed seed management and control weeds post-harvest to prevent seed production. Resistant Weeds x Contact your local Syngenta representative, retailer, crop advisor or extension agent to determine if weeds resistant to modes of action contained in this product are present in your area. Do not assume that each listed weed is being controlled by multiple modes of action. Premixes are intended to broaden the spectrum of weeds that are controlled. Some weeds may be controlled by only one of the active ingredients in this product. If resistant biotypes have been reported, use the full labeled rate of this product, apply at the labeled timing, and tank-mix with an additional different mode of action product so there are multiple effective modes of application for each suspected resistant weed.

4.0 APPLICATION DIRECTIONS 4.1 Methods of Application Applications with Sequence Herbicide alone or in tank mixtures are permitted by ground and by air. Preplant, preemergence and postemergence applications are allowed as specified in Section 9.0 unless otherwise restricted in Section 7.0. For aerial application, consult with State or local authorities regarding any additional requirements for aerial treatments.

Sequence Herbicide Page 12

4.2 Application Equipment x For best results, ensure that each specific aerial application vehicle used is quantifiably pattern tested for aerial application of Sequence Herbicide initially and every year thereafter. x Configure spray equipment to provide accurate and uniform coverage of the target area and minimize potential for spray drift. x To ensure accuracy, calibrate sprayer be fore each use. For information on spray equipment and calibration, consult spray equipment manufacturers and/or state recommendations. x Use sprayers that provide accurate and un iform application with nozzles designed to minimize drift and provide uniform coverage. For most effective control, select nozzles and pressures to deliver coarse to very coarse droplets. Flood nozzles may result in reduced weed control due to inadequate coverage. x Avoid using screens and strainers finer than 50 mesh. x All ground and aerial application equipment must be properly maintained. x All equipment must be washed to remove product residues after use. x Prolonged exposure of this product to uncoated steel surfaces may result in corrosion and possible failure of the part.

In addition to the above statements, for aerial application equipment: x The maintenance of an organic coating (pa int) which meets aerospace specification MIL- C-38413 may prevent corrosion. x To prevent corrosion of exposed parts, thorou ghly wash aircraft after each day of spraying to remove residues of this product accumulated during spraying or from spills. x Landing gear are most susceptible to corrosion.

4.3 Application Volume and Spray Coverage x For ground application, apply alone or in ta nk mixtures in 10-40 gal/A of spray mixture unless otherwise specified. x When weed vegetation is dense, increas e spray volume and pressures to ensure coverage of the target weeds. x Spray boom and nozzle heights must be adjusted to provide coverage of target weeds. x For aerial application, apply alone or in tank mixtures in 3-15 gal/A of spray mixture.

4.4 Mixing Directions

1. Thoroughly clean spray equipment before using this product. Dispose of the cleaning solution in a responsible manner.
2. Prepare no more spray mixture than is needed for the immediate operation.
3. Avoid using screens and strainers finer than 50 mesh.
4. Keep product container tightly closed when not in use.
5. Do not let the spray mixture stand overnight in the spray tank.
6. Flush the spray equipment thoroughly foll owing each use and apply the rinsate to a previously treated area.
7. Pesticide, spray mixture, or rinsate that cannot be used according to label instructions must be disposed of according to federal, state, or local procedures. For guidance in

Sequence Herbicide Page 13

proper disposal methods, contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste representative at the nearest EPA Regional Office.

4.4.1 Sequence Herbicide Alone

1. Fill the spray tank ½ full with clean water.
2. Begin tank agitation and continue throughout mixing and spraying.
3. Add AMS (if used).
4. Add Sequence Herbicide.
5. Fill the remainder of spray tank.

4.4.2 Tank-Mix Precautions x It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions, limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. x Tank mixes with other pesticides, fertilize rs, or any other additives not specifically labeled for use with Sequence Herbicide may result in tank-mix incompatibility or unsatisfactory performance. In such cases, always check tank-mix compatibility by conducting a jar test according to guidance in Section 4.4.3 before actual tank mixing.

4.4.3 Tank-Mix Compatibility Test x Conduct a jar test using a 1 pt to 1 qt contai ner with lid by adding water or other intended carrier such a liquid fertilizer to the jar. x Next, add the appropriate amount of pesticide s(s) or tank-mix partner(s) in their relative proportions based on recommended label rates. Add tank-mix components separately in the order described in the tank-mixing section, Section 4.4.4. After each addition, shake or stir gently to thoroughly mix. x After all ingredients have been added, put the lid on the jar, tighten and invert the jar 10 times to mix. x After mixing, let the mixture stand 15 –30 minutes and then examine for signs of incompatibility such as obvious separation, large flakes, precipitates, gels or heavy oily film on the jar. x If the mixture remains mixed or can be remix ed readily, it is physically compatible and can be used. x If the mixture is incompatible, repeat the test using a compatibility agent at the recommended rate. Or, if applicable, slurry dry formulations in water before adding to the jar. If incompatibility is still observed after following these procedures, do not use the mixture. x After compatibility testing is complete, dispos e of any pesticide wastes in accordance with the storage and disposal section, Section 10.0, of this label.

4.4.4 Sequence Herbicide in Tank Mixtures

1. Fill the spray tank ½ full with clean water.
2. Begin tank agitation and continue throughout mixing and spraying.
3. Add AMS (if used).
4. Add dry formulations to tank.
5. Add liquid formulations to tank.

Sequence Herbicide Page 14

6. Add Sequence Herbicide.
7. Fill remainder of spray tank.

4.4.5 Spray Additives x Ammonium Sulfate (AMS) o Control of annual and perennial weeds wit h Sequence Herbicide may be improved by adding dry ammonium sulfate at 1 to 2% by weight or 8.5-17 lb/100 gal of water. If using liquid ammonium sulfate, select a rate to deliver an equivalent amount. o In areas where the water sources contain Ca, Mg, or Mn levels exceeding 150 ppm (such as parts of the High Plains), use a minimum of 8.5 lb AMS per 100 gal of spray mixture unless the specific crop directions prohibit such use. o Do not reduce use rates of this product when using AMS. x Drift reduction agents may be used with Sequence Herbicide.

5.0 REPLANT AND ROTATIONAL CROP 5.1 Replant and Rotational Crop Restrictions x If a crop treated with Sequence Herbicide is lost, any crop on this label, or on a supplemental Sequence Herbicide label, may be replanted or rotated at any interval provided that the rate of Sequence Herbicide applied to the previous crop was not greater than the labeled rate for the crop to be replanted. x Sequence Herbicide may be applied again following crop replanting provided the total annual maximum rate for that crop is not exceeded x The following crops may be planted or replanted at the specified interval following application of Sequence Herbicide. Crop Plant-Back Interval Alfalfa 4 months Barley Oats Rye Wheat 4½ months

Tomatoes, direct seeded 6 months Clover (seeded) 9 months Buckwheat Cabbage Peppers Rice Root crops Stone fruits Tobacco Tree nuts Next spring following treatment Sequence Herbicide Tank Mixtures: For Rotational Crop restrictions for Sequence Herbicide used in tank mixtures, refer to the restrictions above for Sequence Herbicide and to the respective product labels of any mixing partner(s) for additional statements/restrictions. Follow the most restrictive interval.

Sequence Herbicide Page 15

6.0 COVER CROPS A cover crop can be an important tool for the overall farm cropping system. Cover crops are planted for conservation purposes, soil erosion control, soil health improvement, water quality improvement and weed management. A cover crop can be a single crop or a combination of crops, including grasses and/or broadleaf crops.

After harvest of a Sequence Herbicide treated crop, planting of a cover crop is allowed provided the cover crop is not grazed or fed to livestock nor harvested for food. Terminate the cover crop through natural causes such as frost or intentional termination by herbicide application, crimping, rolling, tillage or cutting.

All possible cover crops or cover crop combinations have not been tested for tolerance to this product. Before planting the cover crop, determine the level of tolerance for the intended cover crops by conducting a field bioassay. Refer to Section 6.1 for instructions on how to conduct a field bioassay.

6.1 Field Bioassay for Cover Crops A field bioassay is a method of determining if herbicide residues are present in the soil at concentrations high enough to adversely affect crop growth.

Conduct the field bioassay by planting several strips of the desired cover crop across the field which has been previously treated with Sequence Herbicide. Plant the cover crop strips perpendicular to the direction of the product application. Locate the strips so that all the different field conditions are encountered, including differences in field terrain, soil texture, organic matter, pH, and drainage.

If the cover crop does not show adverse effects such as crop injury and/or stand reduction, the field can be planted to this cover crop. If injury and/or stand reduction are visible, wait two to four weeks for further herbicide degradation to occur and repeat the bioassay. Alternatively, select a different cover crop and repeat the bioassay. Only plant cover crops that show acceptable tolerance in the field bioassay.

7.0 RESTRICTIONS AND PRECAUTIONS 7.1 Use Restrictions x DO NOT sell, use or distribute this product in Nassau and Suffolk Counties in the State of New York. x DO NOT apply this product through any type of irrigation system. x DO NOT spray if conditions of thermal inversion exist, or if wind direction and speed may cause spray to drift onto adjacent non-target areas. x DO NOT apply in conditions where excessive spray drift may occur. x If a cover crop is planted after a Sequence Herbicide treated crop, DO NOT graze or feed the cover crop to livestock nor harvest for food. x DO NOT apply to any body of water.

Sequence Herbicide Page 16

x DO NOT apply under conditions which favor runoff or wind erosion of soil containing this product to non-target areas.

7.2 Use Precautions x Use of a sprayer or applicator contaminated with any other materials may result in crop damage or clogging of the application device. x Sequence Herbicide requires actively growing green plant tissue to function fully. Application to drought-stressed weeds or weeds with little green foliage (i.e. mowed, cut, or hailed on weeds); weeds covered with dust; weeds damaged by insects or diseases may result in reduced weed control. x Visible effects on annual weeds occur within 2-4 days after application; effects on perennial weeds may take 7 days or longer. Extremely cool or cloudy weather following treatment may slow activity. x Heavy rainfall or irrigation shortly after application may require retreatment. x Tillage or mowing within 3 days following application may reduce weed control. x Avoid aerial application under conditions where uniform coverage cannot be obtained. x Avoid making applications under windy conditions. x Avoid spray overlap, as crop injury may result. x Before planting a cover crop, determine the level of tolerance for the intended cover crop to Sequence Herbicide by conducting a field bioassay (Section 6.1). x Thoroughly clean the spray system with water and a commercial tank cleaner after each use. x Mix, store and apply spray solutions of Sequ ence Herbicide using only plastic, plastic- lined steel, stainless steel, or fiberglass containers. Do not store the concentrate in galvanized steel, aluminum, carbon steel, or unlined steel containers. x Avoid application to humans or animals. Ensure that flagmen and loaders avoid inhalation of spray mist and prolonged contact with skin. x To prevent off-site movement due to runoff or wind erosion: o Avoid treating powdery dry or light sa nd soils when conditions are favorable for wind erosion. Under these conditions, ensure that the soil surface is first settled by rainfall or irrigation. o Avoid application to impervious substrat es, such as paved or highly compacted surfaces. o Avoid use of use tailwater from the first flood or furrow irrigation of treated fields to treat nontarget crops, unless at least ½ inch of rainfall has occurred between application and the first irrigation. x Follow labeled rates for target weeds found in Section 8.1 – Section 8.3 to avoid crop injury and illegal residues or weed control failures.

7.3 MANDATORY SPRAY DRIFT MANAGEMENT x AVOIDING SPRAY DRIFT AT THE APPLICATION SITE IS THE RESPONSIBILITY OF THE APPLICATOR AND THE GROWER. x The interaction of many equipment- and we ather-related factors determines the potential for spray drift. x The applicator and grower must consider the interaction of equipment and weather-

Sequence Herbicide Page 17

related factors to ensure that the potential for drift to sensitive non-target plants is minimal. x This pesticide may only be applied when the potential for drift to adjacent sensitive areas (e.g., residential areas, bodies of water, non-target plants) is minimal (i.e., when the wind is blowing away from the sensitive area). x Consult with local and State agricultural authorities for information regarding avoiding or minimizing spray drift.

7.3.1 Aerial Spray Drift Management

Mandatory Spray Drift Management

Aerial Applications x Do not release spray at a height greater than 10 ft above the ground or vegetative canopy, unless a greater application height is necessary for pilot safety. x Applicators are required to select the nozzle and pressure that deliver medium or coarser droplets (ASABE S641). x If the wind speed is 10 miles per hour or less, applicators must use ½ swath displacement upwind at the downwind edge of the field. When the wind speed is between 11-15 miles per hour, applicators must use ¾ swath displacement upwind at the downwind edge of the field. x Do not apply when wind speeds exceed 15 mph at the application site. If the wind speed is greater than 10 mph, the boom length must be 65% or less of the wingspan for fixed wing aircraft and 75% or less of the rotor diameter for helicopters. Otherwise, the boom length must be 75% or less of the wingspan for fixed-wing aircraft and 90% or less of the rotor diameter for helicopters. x Do not apply during temperature inversions.

7.3.2 Ground Boom Applications

Mandatory Spray Drift Management

Ground Boom Applications x User must only apply with the release height recommended by the manufacturer, but no more than 4 feet above the ground or crop canopy. x Applicators are required to select the nozzles and pressure that deliver medium or coarser droplets (ASABE S572). x Do not apply when wind speeds exceed 15 miles per hour at the application site. x Do not apply during temperature inversions.

Sequence Herbicide Page 18

7.3.3 Boomless Ground Application

Mandatory Spray Drift Management

Boomless Ground Application x Applicators are required to select the nozzle and pressure that deliver medium or coarser droplet size (ASABE S572.3) for all applications. x Do not apply when wind speeds exceed 15 miles per hour at the application site. x Do not apply during temperature inversions.

7.4 SPRAY DRIFT ADVISORIES

THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT.

BE AWARE OF NEARBY NON-TARGET SIRES AND ENVIRONMENTAL CONDITIONS.

7.4.1 Importance of Droplet Size x An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide target pest control. x While applying larger droplets will reduce spray drif t, the potential, for drift will be greater if applications are made improperly, or under unfavorable environmental conditions.

7.4.2 Controlling Droplet Size – Ground Boom x Volume – Increasing the spray volume so that larger droplets are produced will reduce spray drift. Use the highest practical spray volume for the application. If a greater spray volume is needed, consider using a nozzle with a higher flow rate. x Pressure – Use the lowest spray pressure recommended for the nozzle to produce the target spray volume and droplet size. x Spray Nozzles – Use a spray nozzle that is designed for the intended application. Consider using nozzles designed to reduce drift.

7.4.3 Boomless Ground Application x Setting nozzles at the lowest effective height will help reduce the potential for spray drift.

7.4.4 Handheld Technology Applications x Take precautions to minimize spray drift.

7.4.5 Controlling Droplet Size – Aircraft x Adjust Nozzles – follow nozzle manufacturers’ recommendations for setting up nozzles. Generally, to reduce fine droplets, nozzles should be oriented parallel with the airflow in flight.

Sequence Herbicide Page 19

7.4.6 BOOMHEIGHT – Ground Boom x For ground equipment, the boom should re main level with the crop and have minimal bounce.

7.4.7 RELEASE HEIGHT - Aircraft x Higher release heights increase the potential for spray drift.

7.4.8 SHIELDED SPRAYERS x Shielding the boom or individual nozzles ca n reduce spray drift. Consider using shielded sprayers. Verify that the shields are not interfering with the uniform deposition of the spray on the target area.

7.4.9 Swath Adjustment x When applications are made with a crossw ind, the swath will be displaced downwind. Therefore, on the up- and downwind edges of the field, compensate for this displacement by adjusting the path of the aircraft upwind. Increase swath adjustment distance with increasing drift potential (higher wind, smaller drops, etc.).

7.4.10 TEMPERATURE AND HUMIDITY x When making applications in hot and dry cond itions, use larger droplets to reduce effects of evaporation.

7.4.11 Temperature Inversions x Do not apply during a temperature inversion because drift potential is high during a temperature inversion. Temperature inversions restrict vertical air mixing, which causes small suspended droplets to remain in a concentrated cloud. This cloud can move in unpredictable directions due to the light variable winds common during inversions. Temperature inversion are characterized by increasing temperature with altitude and are common on nights with limited cloud cover and light to no wind. The presence of an inversion can be indicated by ground fog or by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upwards and rapidly dissipates indicates good vertical air mixing. x Temperature inversions are characterized by increasing temperatures with altitude and are common on nights with limited cloud cover and light to no wind. They begin to form as the sun sets and often continue into the morning. x Their presence can be indicated by ground fog; however, if fog is not present, inversions can also be identified by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing.

7.4.12 Wind x Drift potential generally increases with wind speed. AVOID APPLICATIONS SURING GUSTY WIND CONDITIONS.

Sequence Herbicide Page 20

x Applicators need to be familiar with local wi nd patterns and terrain that could affect spray drift.

7.4.13 Sensitive Areas x Apply Sequence Herbicide only when the pot ential for drift to adjacent sensitive areas (e.g., residential areas, bodies of water, known habitat for threatened or endangered species, non-target crops) is minimal (e.g., when wind is blowing away from the sensitive areas).

8.0 WEEDS CONTROLLED OR PARTIALLY CONTROLLED BY SEQUENCE HERBICIDE

PARTIAL WEED CONTROL Where reference is made to weeds partially controlled (PC), partial control can either mean erratic control from good to poor, or consistent control at a level below that generally considered acceptable for commercial weed control.

8.1 Annual Weed Control for Sequence Herbicide Used Alone SEQUENCE HERBICIDE PINTS PER ACRE MAXIMUM WEED (HEIGHT/LENGTH) WEED SPECIES SCIENTIFIC NAME 3" 6" 12" 18" Anoda, spurred Anoda cristata 2.5 3 Barley Hordeum vulgare 2.5 Barnyardgrass Echinochloa crus-galli 2.5 3.5 Bassia, fivehook Bassia hyssopifolia 2.5 Bittercress Cardamine spp. 2.5 Bluegrass, annual Poa annua 2.5 Bluegrass, bulbous Poa bulbosa 2.5 Bristly starbur Ancanthospornum hispidum 2.5 2.5 Brome, downy Bromus tectorum 2.5 Brome, Japanese Bromus japonicus 2.5 2.5 Browntop panicum Panicum fasciculatum 2.5 2.5 3.5 Buckwheat, wild1 Polygonum convolvulus 3 (PC) Buffalobur Solanum rostratum 2.5 3.5 Burcucumber Sicyos angulatus 2.5 2.5 Burgherkin Cucumis anguria 2.5 3.5 Buttercup2 Ranunculus spp. 2.5

Sequence Herbicide Page 21

SEQUENCE HERBICIDE PINTS PER ACRE MAXIMUM WEED (HEIGHT/LENGTH) WEED SPECIES SCIENTIFIC NAME 3" 6" 12" 18" Camphorweed Heterotheca subaxillaris 3.5 Canarygrass Phalaris canariensis 2.5 Carolina geranium Geranium carolinianum 2.5 3.5 Carpetweed Mullugo verticillata 2.5 2.5 Cheat Bromus secalinus 2.5 Chervil Anthriscus cerefolium 2.5 Chickweed, common Stellaria media 2.5 2.5 Chickweed, mouseear Cerastium vulgatum 2.5 2.5 Citronmelon Citrullus lanatus 2.5 3.5 Cocklebur, common Xanthium strumarium 2.5 2.5 Coffee senna Senna occidentalis 2.5 3.5 Corn3 Zea mays 2.5 2.5 Corn speedwell Veronica arvensis 2.5 Cowpea Vigna unguiculata 2.5 3.5 Crabgrass Digitaria spp. 2.5 2.5 Crotalaria, showy Crotalaria spectabilis 2.5 2.5 3.5 Croton, tropic Croton glandulosus 2.5 3.5 Crowfootgrass Dactyloctenium aegyptium 2.5 2.5 4 Cutleaf eveningprimrose Oenothera laciniata 2.5 4 Devil’s–claw (unicorn plant) Proboscidea louisianica 2.5 3 Dwarfdandelion Krigia cespitosa 2.5 Eastern mannagrass 2.5 Eclipta Eclipta prostrata 2.5 2.5 3.5 Fall panicum Panicum dichotomiflorum 2.5 2.5 3.5 3.5 Falsedandelion Pyrrhopappus carolinianus 2.5 Falseflax, smallseed Camelina microcarpa 2.5 Fiddleneck Amsinckia spp. 2.5 3.5 Filaree Erodium spp. 2.5 3.5 Fleabane, annual Erigeron annus 2.5 Fleabane, hairy Conyza bonariensis 2.5 3.5

Sequence Herbicide Page 22

SEQUENCE HERBICIDE PINTS PER ACRE MAXIMUM WEED (HEIGHT/LENGTH) WEED SPECIES SCIENTIFIC NAME 3" 6" 12" 18" Fleabane, rough Erigeron strigosus 2.5 2.5 Florida beggarweed1 Desmodium tortuosum 2.5 (PC) 2.5 (PC) Florida pusley Richardia scabra 2.5 3.5 Foxtails Setaria spp. 2.5 2.5 Goatgrass, jointed Aegilops cylindrica 2.5 Goosefoot, nettleleaf Chenopodium murale 3.5 Goosegrass Eleusine indica 2.5 2.5 3.5 Grain sorghum (milo) Sorghum bicolor 2.5 2.5 Groundcherry Physalis spp. 3.5 Groundsel, common Senecio vulgaris 2.5 Hemp sesbania Sesbania exaltata 2.5 3.5 Henbit Lamium amplexicaule 2.5 4 Hophornbeam copperleaf Acalypha ostryifolia 2.5 4 Horseweed/Marestail Conyza canadensis 2.5 2.5 3.5 Itchgrass Rottboellia cochinchinensis 2.5 2.5 3.5 Jimsonweed Datura stramonium 2.5 3.5 Johnsongrass, seedling Sorghum halepense 2.5 2.5 Junglerice Echinochloa colona 2.5 2.5 3.5 Knotweed Polygonum aviculare 2.5 3.5 Kochia Kochia scoparia 2.5 2.5 Lambsquarters, common Chenopodium album 2.5 3.0 3.5 Lettuce, prickly Lactuca serriola 2.5 2.5 Little barley Hordeum pussillum 2.5 London rocket Sisymbrium irio 2.5 2.5 Mayweed Anthemis cotula 2.5 2.5 3.5 Morningglory4 Ipomoea spp. 2.5 3.5 Mustard, blue Chorispora tenella 2.5 2.5 Mustard, tansy Descurainia pinnata 2.5 2.5 Mustard, tumble Sisymbrium altissimum 2.5 2.5 Mustard, wild Brassica kaber 2.5 2.5 Nightshade, black Solanum nigrum 2.5 2.5 3.5

Sequence Herbicide Page 23

SEQUENCE HERBICIDE PINTS PER ACRE MAXIMUM WEED (HEIGHT/LENGTH) WEED SPECIES SCIENTIFIC NAME 3" 6" 12" 18" Nightshade, hairy Solanum sarrachoides Sendtner 2.5 2.5 3.5 Oats Avena sativa 2.5 2.5 Oats, wild Avena fatua 2.5 2.5 Panicum, Texas5 Panicum texanum 2.5 3.5 Pennycress, field Thlaspi arvense 2.5 Pigweed Amaranthus spp. 2.5 2.5 3 Poinsettia, wild Euphorbia heterophylla 2.5 3.5 Prickly sida (Teaweed)4 Sida spinosa 2.5 3.5 Puncturevine Tribulus terrestris 2.5 3.5 Purslane, common Portulaca oleracea 2.5 3.5 Rabbitfootgrass Polypogon monspeliensis 2.5 Ragweed, common Ambrosia artemisiifolia 2.5 2.5 3.5 Ragweed, giant Ambrosia trifida 2.5 2.5 3.5 Red rice Oryza sativa 2.5 Redweed Melochia corchorifolia 2.5 3.5 Rockpurslane Redmaids Calandrinia spp. 2.5 Rye Secale cereale 2.5 Ryegrass, Italian Lolium multiflorum 2.5 3.5 Sandbur, field Cenchrus incertus 2.5 Sandbur, southern Cenchrus echinatus 2.5 2.5 Shattercane Sorghum bicolor 2.5 2.5 Shepherdspurse Capsella bursa-pastoris 2.5 Sicklepod Senna obtusifolia 2.5 3.5 Signalgrass, broadleaf Brachiaria platyphylla 2.5 2.5 3.5 Smartweed (ladysthumb) Polygonum persicaria 2.5 3.5 Smartweed, Pennsylvania Polygonum pensylvanicum 2.5 3.5 Sowthistle, annual Sonchus oleraceus 2.5 3.5 Spanishneedles Bidens bipinnata 2.5 3.5 Speedwell, purslane Veronica peregrina 2.5 Sprangletop Leptochloa spp. 2.5 2.5 Spurge, prostrate Euphorbia spp. 2.5 2.5

Sequence Herbicide Page 24

SEQUENCE HERBICIDE PINTS PER ACRE MAXIMUM WEED (HEIGHT/LENGTH) WEED SPECIES SCIENTIFIC NAME 3" 6" 12" 18" Spurge, spotted Euphorbia maculata 2.5 2.5 Spurry, umbrella Holosteum umbellatum 2.5 Stinkgrass Eragrostis cilianensis 2.5 Sunflower, common Helianthus annuus 2.5 Thistle, Russian Salsola iberica 2.5 3.5 Velvetleaf Abutilon theophrasti 2.5 3.5 Virginia copperleaf Acalypha virginica 2.5 3.5 Virginia pepperweed Lepidium virginicum 2.5 Waterhemp Amaranthus spp. 2.5 3.5 Wheat Triticum aestivum 2.5 2.5 Wild-proso millet Panicum miliaceum 2.5 3 3.5 Witchgrass Panicum capillare 2.5 Woolly cupgrass Eriochloa villosa 2.5 2.5 Yellow rocket Barbarea vulgaris 2.5 2.5 1PC= Partial control 2Control of buttercup will be reduced at the button stage. 3Sequence Herbicide will not control glyphosate resistant volunteer corn. 4Multiple applications may be required for control of morningglory and prickly sida (teaweed). 5 Sequence Herbicide will provide suppression of emerging Texas panicum. Precaution: x Sequence Herbicide applied after weed emergence will not control glyphosate-resistant biotypes.

Sequence Herbicide Page 25

8.2 Annual Weed Control – Sequence Herbicide Rates in a Tank-Mix with Dicamba or 2,4-D

WEED SPECIES

SCIENTIFIC NAME MAXIMUM HEIGHT/ LENGTH SEQUENCE HERBICIDE PINTS PER ACRE Kochia (dicamba only) Lambsquarters, common Lettuce, prickly Morningglory Pigweed Ragweed, common Ragweed, giant Smartweed, Pennsylvania Thistle, Russian Velvetleaf Kochia scoparia Chenopodium album Lactuca serriola Ipomoea spp. Amaranthus spp. Ambrosia artemisiifolia Ambrosia trifida Polygonum pensylvanicum Salsola iberica Abutilon theophrasti 6" 2.-2.5 Cocklebur, common Fleabane, rough Horseweed/Marestail Sunflower, common Xanthium strumarium Erigeron strigosus Conyza canadensis Helianthus annuus 12" Precautions: x Read and follow dicamba and 2,4-D labels x Sequence Herbicide applied after weed emergence will not control glyphosate-resistant biotypes.

8.3 Perennial Weed Control – Sequence Herbicide Rates Used Alone or in Tank-Mix with Dicamba or 2,4-D

WEED SPECIES

SCIENTIFIC NAME

SEQUENCE HERBICIDE PINTS PER ACRE

APPLICATION TIMING AND REMARKS Alfalfa Medicago sativa 3-4 At 6-8 inch stage or more after final cutting in fall. Deep till 7 days after treatment. Artichoke, Jerusalem Helianthus tuberosus 3-4 At or after flowering. Balsam-apple Momordica charantia 3-4 Apply at or beyond bloom. Bahiagrass Paspalum notatum 3-4 Early seedhead stage. Barley, foxtail Hordeum jubatum 2.5-4 4-6 inch stage. Bentgrass Agrostis spp. 3-4 Should have at least 3 inches of growth. Ensure entire crown area has resumed growth prior to fall application. Till 7-10 days after application. Bermudagrass Cynodon dactylon 3-4 Seedheads may require retreatment. Bermudagrass, water (knotgrass) 3-4 Apply when water bermudagrass is 12-18 inches in length. Allow 7 days before flushing or flooding the field. Bindweed, field Convolvulus arvensis 3-4 At or after flowering, west of Mississippi River, in late summer for best results. 3-4 At or after flowering, east of Mississippi River, in late summer for best results.

Sequence Herbicide Page 26

WEED SPECIES

SCIENTIFIC NAME

SEQUENCE HERBICIDE PINTS PER ACRE

APPLICATION TIMING AND REMARKS 3-4 At or after flowering for control, tank-mix with 2,4-D or dicamba, multiple applications may be required. Do not apply by air. 2.5-4 For suppression on irrigated agricultural land tank-mix with 2,4-D or dicamba, apply by ground equipment only. Apply in fall or following harvest on runners 12 inches or more in length. 2-3 For suppression by ground or aerial applications tank-mix with 2,4-D or dicamba. Apply by air in fallow and reduced tillage systems only. Delay applications until maximum emergence has occurred and when vines are between 6-18 inches in length. Bluegrass, Kentucky Poa pratensis 2.5-4 Apply at boot to early seedhead stage. 2-3.5 For partial control in pasture or hay crop renovation, apply when plants are 4-12 inches. Blueweed, Texas Helianthus ciliaris 3-4 Apply at or beyond bloom west of the Mississippi River. For best results, apply in late summer or fall, but before a killing frost. 2.5-4 Apply at or beyond bloom east of the Mississippi River. For best results, apply in late summer or fall, but before a killing frost. Brackenfern Pteridium aquilinum 3-4 Fronds fully expanded and at least 18 inches long. Bromegrass, smooth Bromus inermis 2.5-4 Apply when most plants are at the boot to early seedhead stage. 2-4 For partial control in pasture or hay crop renovation, apply to actively growing plants 4-12 inches in height. Bursage, woollyleaf Ambrosia grayi 3-4 Apply in tank-mix with dicamba to actively growing plants at or beyond flowering. 2-3 (PC) Apply in tank-mix with dicamba to actively growing plants at or beyond flowering. Canarygrass, reed Phalaris arundinacea 3-4 Boot to head. Cattail Typha spp. 3-4 Early head to early bud. Clover, red Clover, white Trifolium pratense Trifolium repens 3-4 Early head to early bud. May require retreatment. Cogongrass Imperata cylindrica 3-4 Late summer/fall, greater than 18 inches in height. May require retreatment. Dallisgrass Paspalum dilatatum 3-4 Early head to early bud.

Sequence Herbicide Page 27

WEED SPECIES

SCIENTIFIC NAME

SEQUENCE HERBICIDE PINTS PER ACRE

APPLICATION TIMING AND REMARKS Dandelion Taraxacum officinale 3-4 Early bud. 2-2.5 Early bud, apply in tank-mix with 2,4-D or dicamba. Dayflower1 Commelina spp. 3-4 (PC) Less than 4 inches in height. Dock, curly1 Rumex crispus 3-4 (PC) Early bud. 2-2.5 (PC) Early bud, apply in tank-mix with 2,4-D or dicamba. Dogbane, hemp Apocynum cannabinum 3-4 Late bud to flower. May require retreatment. 2-2.5 Actively growing at 6-12 inch stage, apply in tank-mix with 2,4-D or dicamba for suppression. Dogfennel Eupatorium capillifolium 3-4 Actively growing, less than 12 inches in height. Fescue Festuca spp. 3-4 Apply when most plants have reached the early head stage. Fescue, tall Festuca arundinacea 2.5-4 Apply 4 pt/A when most plants have reached boot to early seedhead stage. Fall applications only: Apply 2.5 pt/A when plants are 6-12 inches in height. A spring applied sequential treatment of 2 pt/A will improve long term control. Goatweed Scoparia dulcis 3-4 Less than 8 inch stage. Guineagrass Panicum maximum 3-4 7-10 leaf stage. Horsenettle Solanum carolinense 3-4 Early bud stage. Horseradish Armoracia rusticana 3-4 Apply when most plants have reached the late bud to early flower stage in late summer or fall. Iceplant Mesembryanthemum crystallinum 3-4 At or beyond the early bud stage. Johnsongrass Sorghum halepense 2-4 Apply at boot to head stage and in the fall prior to frost. Use 2.5 to 4 pt/A for annual tillage systems. Use 3 to 4 pt/A on no-till acres. Allow 3- 7 days before tillage. 2-3 For burndown, apply when plants are 12 inches in height and allow 3 days before tillage. Kikuyugrass Pennisetum clandestinum 3-4 Spray when most kikuyugrass is at least 8 inches in height. Allow 3 or more days after application before tillage. Knapweed Centaurea spp. 3-4 Apply in fall at late bud to flower stage. Lantana, largeleaf1 Lantana camara 3-4 (PC) Apply at or beyond bloom stage. Lespedeza Lespedeza spp. 3-4 Apply when most plants have reached the early bud stage.

Sequence Herbicide Page 28

WEED SPECIES

SCIENTIFIC NAME

SEQUENCE HERBICIDE PINTS PER ACRE

APPLICATION TIMING AND REMARKS Milkweed, common Asclepias syriaca 3-4 Apply in tank-mix with dicamba when most plants have reached the early bud stage. Milkweed, honeyvine Ampelamus albidus 3-4 Apply in tank-mix with dicamba at late bud to early flower. May require retreatment. Muhly, wirestem Muhlenbergia frondosa 3-4 Use 2.5 to 4 pt/A in pasture, sod, or noncrop areas. Spray plants 8 inches or more in height. Do not till between harvest and fall applications or in the fall or spring prior to spring applications. Allow 3 or more days after application before tillage. Mullein, common Verbascum thapsus 3-4 Early bud. Napiergrass Pennistum purpureum 3-4 Early head stage. Nightshade, silverleaf Solanum eleagnifolium 3-4 Apply when 60% of plants have berries. Apply fall treatments before a killing frost. Nutsedge, purple Nutsedge, yellow

Cyperus rotundus Cyperus esculentus 2-4 Apply 3 to 4pt/A for control of nutsedge plants and immature nutlets attached to treated plants. Treat when plants are in flower or when new nutlets can be found at rhizome tips. Nutlets which have not germinated will not be controlled and may germinate following treatment. For partial control: apply 2 to 3 pt per acre. Treat when plants have 3-5 leaves or less than 6 inches tall. Repeat treatments at this stage for long term control. Orchardgrass

Dactylis glomerata 2.5-4 Apply 4 pt/A on plants at early boot to seedhead stage. For partial control in pasture or hay crop renovation, apply 2.5-3.5 pt/A. Apply to actively growing plants 4- 12 inches in height.

In orchardgrass sods rotated to no- till corn: Apply 2.5-3.5 pt/A. Apply to orchardgrass that is a minimum of 12 inches tall for spring applications and 6 inches tall for fall applications. Allow at least 3 days following application before planting. A sequential application of atrazine will be required for optimum results. Pampasgrass1 Erianthus ravennae 3-4 (PC) Apply at or beyond boot stage. Paragrass Brachiaria mutica 3-4 Early seedhead stage.

Sequence Herbicide Page 29

WEED SPECIES

SCIENTIFIC NAME

SEQUENCE HERBICIDE PINTS PER ACRE

APPLICATION TIMING AND REMARKS Phaseybean1 Phaseolus lathyroides 3-4 (PC) Less than 8 inches tall. Phragmites1 Phragmites spp. 3-4 (PC) For best results, treat during late summer or fall months or when plants are actively growing and in full bloom. Repeat treatments may be necessary. Visual control symptoms will be slow to develop. Poison hemlock Conium maculatum 3-4 Apply as a spray to wet treatment. Optimum results are obtained when plants are treated at the bud to full- bloom stage of growth. Pokeweed, common Phytolacca americana 3-4 Apply to actively growing plants up to 24 inches in height. Quackgrass Agropyron repens 2.5-4

Apply 2.5-4 pt/A in annual cropping systems, or in pastures and sods where deep tillage is used. Do not tank mix with a residual herbicide at the 2.5 pint rate. Spray when quackgrass is 6-8 inches in height. Do not till between harvest and fall applications or in the fall or spring prior to spring application. Allow 3 or more days after application before tillage. 3-4 Apply in pastures, sod, or noncrop areas where deep tillage will not follow the application. Spray when quackgrass is at least 8 inches in height. Redvine1 Brunnichia ovata 2-4 (PC) For suppression, apply 2 pt/A at each of two applications 7-14 days apart or a single application of 4 pt/A. Apply to plants greater than 18 inches tall in September/October to plants which have been growing 45-60 days since the last tillage. Make application at least 1 week prior to killing frost. Ryegrass, perennial Lolium perenne 2-4 Apply 2.5-4 pt/A when most plants are in the boot to head stage or prior to frost. In noncrop or areas where no tillage is practiced, use 3- 4 pt/A. Do not tank mix with residual herbicides when using the 2.5pt/A rate. Smallflowered Alexandergrass Brachiaria subquadripara 3-4 Less than 4 inches in height, actively growing. Smartweed, swamp Polygonum coccineum 3-4 Early bud, 12 inch stage. 2-3 Apply in tank-mix with 2,4-D or dicamba to plants in early bud, 12 inch stage.

Sequence Herbicide Page 30

WEED SPECIES

SCIENTIFIC NAME

SEQUENCE HERBICIDE PINTS PER ACRE

APPLICATION TIMING AND REMARKS Sowthistle, perennial1 Sonchus arvensis 3-4 (PC) Apply when most plants are at or beyond the bud stage of growth. After harvest, mowing, or tillage in the late summer or fall, allow at least 4 weeks for initiation of active growth and rosette development prior to application. Fall treatments must be applied before a killing frost. Allow 3 or more days before tillage. Spurge, leafy Euphorbia esula 2-3 For suppression, apply in tank-mix with 2,4-D or dicamba to plants greater than 12 inches tall. Sweet potato, wild1 Ipomea pandurata 3-4 (PC) Most effective at or beyond flowering stage. Switchgrass Panicum virgatum 3-4 Most effective at boot to head stage. Thistle, artichoke1 Cynara cardunculus 3-4 (PC) Apply when plants are beyond the bloom stage. Thistle, Canada1 Cirsium arvense 3-4 (PC) Apply when most plants are at or beyond the bud stage of growth. After harvest, mowing, or tillage in the late summer or fall, allow at least 4 weeks for initiation of active growth and rosette development prior to application. Fall treatments must be applied before a killing frost. Allow 3 or more days before tillage. For fall applications or following mowing, allow a minimum of 6-8 inches rosette development. 2-3 For suppression, apply in tank-mix with 2,4-D or dicamba in late summer or fall after harvest, mowing, or tillage. Allow rosette regrowth to be a minimum of 6 inches in diameter before treating. Allow 3 or more days before tillage. Timothy Phleum pratense 3-4 Boot to head; wait 3 days before tillage. Torpedograss1 Panicum repens 2.25-3 (PC) At or beyond seedhead. Repeat applications will be required to maintain control. Fall treatments must be made prior to a killing frost. Trumpetcreeper1 Campsis radicans 3-4 (PC) Late September/October applications on actively growing plants at least 18 inches in height; retreatment may be required. Make applications at least one week before killing frost.

Sequence Herbicide Page 31

WEED SPECIES

SCIENTIFIC NAME

SEQUENCE HERBICIDE PINTS PER ACRE

APPLICATION TIMING AND REMARKS Vaseygrass1 Paspalum urvillei 3-4 (PC) Apply at early head stage. Vetch1 Vicia spp. 3-4 (PC) Boot to head. Virginia creeper Parthenocissus quinquefolia 3-4 Full leaf expansion. Velvetgrass Holcus spp. 3-4 Early head stage. Wheatgrass, western Agropyron smithii 3-4 Boot to head. 1PC = partial control

Sequence Herbicide Page 32

9.0 CROP USE DIRECTIONS 9.1 Corn 9.1.1 Preplant or Preemergence Application Crops (including cultivars, varieties, and/or hybrids of these) Field corn Popcorn Seed corn Sweet corn Application Timing Rate (pt/A) Use Directions Preplant Application: May be applied up to 30 days prior to planting.

Preemergence Application: Apply during planting or after planting but before crop emergence. Coarse Soils: 2.5-3.5 Medium to fine soils: 2.5-4.0

When weeds are dense or large, use higher rates within the range provided in Sections 8.1-8.3. Also use higher rates within the range for improved residual control. Control of weeds may be improved by adding dry ammonium sulfate at 8.5-17.0 lb/100 gallons of water.

Can be applied to glyphosate- resistant corn For Weed Control: x Refer to Sections 8.1-8.3 for list of weeds controlled or partially controlled. Tank Mix or Sequential Application Options: x Refer to Section 9.1.3 for tank-mix options. Resistance Management: x Refer to Section 3.1. Precautions: x Injury may occur following use under abnormally high soil moisture conditions during early development of the crop. x For preplant application, to the extent possible, do not move treated soil out of the row or move untreated soil to the surface during planting, or weed control will be diminished. USE RESTRICTIONS

1. Refer to Section 7.1 for additional product use restrictions.
2. Maximum Single Application Rate: 4.0 pt/A
3. Maximum Annual Rate: 4.0 pt/A/year a. DO NOT exceed 3.71 lb ai/A/year of S-metolachlor from Sequence Herbicide or other S- metolachlor-containing products. b. DO NOT exceed 6.0 lb ae/A/year of acid equivalents from glyphosate-containing products.
4. DO NOT apply to emerged corn that is not glyphosate-resistant, as severe crop injury will occur.
5. Preharvest Interval (PHI): Not Applicable

Sequence Herbicide Page 33

9.1.2 Postemergence Application on Glyphosate-Resistant Corn Crops (including cultivars, varieties, and/or hybrids of these) Field corn, glyphosate-resistant Seed corn, glyphosate-resistant Sweet corn, glyphosate- resistant Application Timing Rate (pt/A) Use Directions Apply through the V8 stage or 30 inches, whichever comes first.

Applications may be made to corn 30 to 48 inches in height using ground equipment with drop nozzles only. 2.0-3.7

When weeds are dense or large, use higher rates within the range provided in Sections 8.1-8.3. Also use higher rates within the range for improved residual control. Apply over-the-top on glyphosate- resistant corn

Use only water as the carrier for postemergence application. For Weed Control: x Refer to Sections 8.1-8.3 for list of weeds controlled or partially controlled. Tank Mix Options: x Refer to Section 9.1.3 for tank-mix options. Resistance Management: x Refer to Section 3.1. Precautions: x Treated leaves may exhibit necrot ic spotting. This does not affect normal plant growth and crop yield. x Avoid application of spray in to whorls of corn plants. USE RESTRICTIONS

1. Refer to Section 7.1 for additional product use restrictions.
2. Maximum Single Application Rate: 3.7 pt/A
3. Maximum Annual Rate: 5.0 pt/A/year a. DO NOT exceed 3.71 lb ai/A/year of S-metolachlor from Sequence Herbicide or other S- metolachlor-containing products. b. DO NOT exceed 6.0 lb ae/A/year of acid equivalents from glyphosate-containing products. c. DO NOT exceed 1.5 lb ae/A/year of acid equivalents in postemergence applications from glyphosate-containing products.
4. DO NOT use if plants are under any type of stress including but not limited to drought, insect, disease, or injury from cultivation.
5. DO NOT apply to emerged corn that is not glyphosate-resistant, as severe crop injury will occur.
6. DO NOT graze or feed forage for 30 days following application.
7. Preharvest Interval (PHI): a. 50 days b. Sweet corn ears: 30 days

Sequence Herbicide Page 34

9.1.3 Tank-Mix Combinations for Corn Application Tank-Mix Brands Use Directions Preplant Preemergence Princep®

Sequence Herbicide may be tank mixed with other herbicides labeled for preplant, preemergence, or postemergence application in corn.

Apply as directed according to this label and the labels of tank- mix partners.

Preplant Preemergence Postemergence AAtrex® (atrazine) Acuron® Acuron® Flexi Bicep II Magnum® Bicep Lite II Magnum® Callisto® Dual Magnum® Dual II Magnum® Endigo ZC® Glyphosate brands Lexar® EZ Lumax® EZ Warrior Insecticide with Zeon Technology® Precaution: x Broad spectrum insecticide in tank mixes can cause flare-ups of secondary pests under certain conditions. Only use when pest populations have reached economic threshold. TANK-MIX USE RESTRICTIONS

1. All use restrictions cited in Section 9.1.1 and 9.1.2 for Sequence Herbicide solo apply to tank mixes with Sequence Herbicide.
2. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.

Sequence Herbicide Page 35

9.2 Cotton 9.2.1 Preplant or Preemergence Application Crops (including cultivars, varieties, and/or hybrids of these) Cotton Application Timing Rate (pt/A) Use Directions Preplant Application: Apply up to 30 days before planting crops.

Preemergence Application: Apply during planting or after planting but before crop emergence. Use the following rates for the specific soil type:

Sandy loam soil: 2.0-2.5 pt/A

Medium and Fine soils 2.0-3.5

When weeds are dense or large, use higher rates within the range provided in Section 8.1-8.3. Also use higher rates within the range for improved residual control. Use only in: AR, KS, LA, MS, NM, OK, TN, TX and the Boot Heel of MO.

Control of weeds may be improved by adding dry ammonium sulfate at 8.5-17.0 lb/100 gallons of water.

For Weed Control: x Refer to Sections 8.1-8.3 for list of weeds controlled or partially controlled. Tank Mix Options: x Refer to Section 9.2.4 for tank-mix options. Resistance Management: x Refer to Section 3.1. Precautions: x For preplant application, to the extent possible, do not move treated soil out of the row or move untreated soil to the surface during planting, or weed control will be diminished. x If heavy rainfall occurs soon after application, crop injury may occur. Injury will be more severe in poorly drained areas where water stands for several hours or days, or where the seeding slit has not been properly closed. USE RESTRICTIONS

1. Refer to Section 7.1 for additional product use restrictions.
2. Maximum Single Application Rate: 3.5 pt/A
3. Maximum Annual Rate: 3.5 pt/A/year a. DO NOT exceed 2.48 lb ai/A/year of S-metolachlor from Sequence Herbicide or other S- metolachlor-containing products. b. DO NOT exceed 6.0 lb ae/A/year of acid equivalents from glyphosate-containing products.
4. DO NOT use on sand or loamy sand soils.
5. DO NOT use on Taloka silt loam.
6. DO NOT use in Gaines County, TX.
7. Preplant and preemergence applications are limited to use in AR, KS, LA, MS, NM, OK, TN, TX and the Boot Heel of MO.
8. DO NOT incorporate if applied prior to planting, or crop injury may result.
9. DO NOT apply to emerged cotton that is not glyphosate-resistant, as severe crop injury will occur.
10. Preharvest Interval (PHI): Not Applicable

Sequence Herbicide Page 36

9.2.2 Postemergence Over-The-Top Application on Glyphosate-Resistant Cotton Only (such as Roundup Ready Flexx cotton) Crops (including cultivars, varieties, and/or hybrids of these) Cotton, varieties resistant to glyphosate such as Roundup Ready Flexx cotton Application Timing Rate (pt/A) Use Directions Apply postemergence from cotyledon stage to the 10- leaf stage (not to exceed 12 inches tall) of cotton development.

On cotton with less than 5 leaves: 2.0-2.5

From 5-leaf through the 10 leaf stage of cotton: 2.0-3.5

When weeds are dense or large, use higher rates within the range provided in Section 8.1-8.3. Also use higher rates within the range for improved residual control. For use in: AL, AZ, AR, FL, GA, KS, KY, LA, MD, MO, MS, NC, NM, OK, SC, TN, TX and VA.

Apply over-the-top by postemergence or hooded sprayer applications.

Use only water as the carrier for postemergence and post-directed applications.

Do Not include AMS or other adjuvants when applications are made postemergence. For Weed Control: x Refer to Sections 8.1-8.3 for list of weeds controlled or partially controlled. Tank Mix Options: x Refer to Section 9.2.4 for tank-mix options. Resistance Management: x Refer to Section 3.1. Precautions: x Crop canopy interference can reduce spray coverage on target weeds and soil and hinder weed control. In large cotton, to improve spray coverage of target weeds, apply in 12 or more gallons of water per acre. x Do Not apply after the 10-leaf stage (not to exceed 12 inches tall) of cotton, or severe injury, including yield loss, could occur. x Treated leaves may exhibit necrot ic spotting. This does not affect normal plant growth and crop yield. x Do Not use if plants are under any type of stress including but not limited to that caused by drought, insect, disease, or injury from cultivation. x Do Not apply to emerged conventional cotton, as severe crop injury will occur USE RESTRICTIONS

1. Refer to Section 7.1 for additional product use restrictions.
2. Maximum Single Application Rate: 3.5 pt/A on cotton from the 5-leaf through the 10-leaf stage. a. DO NOT exceed 2.5 pt/A on cotton with less than 5 leaves.
3. Maximum Annual Rate: 3.5 pt/A/year a. DO NOT exceed 2.48 lb ai/A/year of S-metolachlor from Sequence Herbicide or other S- metolachlor-containing products. b. DO NOT exceed 6.0 lb ae/A/year of acid equivalents from glyphosate-containing products.
4. DO NOT use in Gaines County, TX.
5. DO NOT apply to Taloka silt loam.
6. Preharvest Interval (PHI): 100 days

Sequence Herbicide Page 37

9.2.3 Postemergence Over-The-Top Application on Glyphosate-Resistant Cotton Crops (including cultivars, varieties, and/or hybrids) Cotton, Roundup Ready brand Target Weeds Rate (pt/A) Application Timing Use Directions Weeds listed in Sections 8.1 – 8.3 Maximum of 2.5 Apply post-emergence from 3 inch tall cotton up to the 4-leaf stage (until the fifth true leaf reaches the size of a quarter) of cotton development.

Refer to Sections 8.1-8.3 for specific details on rates and timing. When weeds are dense or large, use higher rates within the provided range.

For use in: AL, AR, CA, FL, GA, KS, KY, LA, MD, MO, MS, NC, NM, OK, SC, TN, TX and VA.

Apply over-the-top by post- emergence, post-directed or hooded sprayer applications.

Use only water as the carrier for post- emergence applications.

Do Not include AMS or other adjuvants when applications are made post-emergence. Tank Mix Options: x Refer to Sections 9.2.4 for tank mix options with Sequence Herbicide. Resistance Management: x Refer to Section 3.1. Precautions: x Crop canopy interference can reduce spray coverage on target weeds and soil and hinder weed control. In large cotton, to improve spray coverage of target weeds, apply in 12 or more gallons of water per acre. x Treated leaves may exhibit necrot ic spotting. This does not affect normal plant growth and crop yield. x USE RESTRICTIONS

1. Refer to Section 7.1 for additional product use restrictions.
2. Maximum Single Application Rate: 2.5 pt/A
3. Maximum Annual Rate: 3.5 pt/A/year a. DO NOT exceed 2.48 lb ai/A/year of S-metolachlor from Sequence Herbicide or other S- metolachlor-containing products. b. DO NOT exceed 6.0 lb ae/A/year of acid equivalents from glyphosate-containing products.
4. DO NOT apply after the 4-leaf stage of cotton, or severe injury, including yield loss, could occur.
5. DO NOT use in Gaines County, TX.
6. DO NOT use if plants are under any type of stress including but not limited to that caused by drought, insect, disease, or injury from cultivation.
7. DO NOT apply to emerged cotton that is not glyphosate-resistant, as severe crop injury will occur.
8. DO NOT apply to Taloka silt loam.
9. Preharvest Interval (PHI): a. 100 days b. 80 days for post-directed application

Sequence Herbicide Page 38

9.2.4 Tank-Mix Combinations for Cotton Application Tank-Mix Brands Use Directions Preplant Preemergence Caparol® Dual Magnum Glyphosate Reflex Sequence Herbicide may be tank-mixed with other herbicides labeled for preplant, preemergence, or postemergence application in cotton.

Apply as directed according to this label and the labels of tank- mix partners.

For tank-mixtures with approved dicamba products in cotton, consult dicamba label for use directions. Postemergence Post-directed

For use on glyphosate-resistant cotton Besiege® Endigo ZC

Glyphosate Warrior Insecticide with Zeon Technology Precaution: x Broad spectrum insecticide in tank mixes can cause flare-ups of secondary pests under certain conditions. Only use when pest populations have reached economic threshold. TANK-MIX USE RESTRICTIONS

1. All use restrictions cited in Section 9.2.1, 9.2.2, and 9.2.3 for Sequence Herbicide solo apply to tank mixes with Sequence Herbicide.
2. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.

Sequence Herbicide Page 39

9.3 Legume Vegetables (Succulent or Dried), Crop Group 6, Except Soybean 9.3.1 Preplant or Preemergence Application Crops (including cultivars, varieties, and/or hybrids of these) Edible Podded (only): Jackbean Sword bean Soybean, (immature seed)

Edible Podded, Succulent Shelled or Dried Shelled: Pigeon pea Bean (Phaseolus spp.) Field bean Kidney bean Lima bean Navy bean Pinto bean Runner bean Snap bean Edible Podded, Succulent Shelled or Dried Shelled: Bean (Phaseolus spp.) (continued) Tepary Bean Wax Bean

Pea (Pisum spp.) Dwarf pea Edible-pod pea English pea Field pea Garden pea Green pea Snow pea Sugar snap pea

Edible Podded, Succulent Shelled or Dried Shelled: (continued)

Bean (Vigna spp.) Adzuki bean Asparagus bean Blackeyed pea Catjang Chinese longbean Cowpea Crowder pea Moth bean Mung bean Rice bean Southern pea Urd bean Yardlong bean Succulent Shelled or Dried Shelled: Broad bean (fava bean)

Dried Shelled Only: Chickpea (garbanzo bean) Guar Lablab bean (hyacinth bean) Grain lupin Sweet lupin White lupin White sweet lupin Lentils

Application Timing Rate (pt/A) Use Directions Preplant Application: May be applied by broadcast up to 30 days prior to planting.

Preemergence Application: Apply broadcast during planting or after planting but before crop emergence.

For all applications use the rate for the specific soil-texture and organic matter (OM) as follows:

Coarse soils: 2.0-3.5

Medium soils- <3% OM: 2.0- 4.0

Fine soils > 3% OM 2.0-4.0

When weeds are dense or large, use higher rates within the range provided in Section 8.1-8.3. Also use higher rates within the range for improved residual control.

Control of weeds may be improved by adding dry ammonium sulfate 8.5-17 lb/100 gallons of spray.

For control of emerged weeds at application, apply to actively growing weeds. For Weed Control: x Refer to Sections 8.1-8.3 for list of weeds controlled or partially controlled. Tank Mix Options: x Refer to Section 9.3.2 for tank-mix options. Resistance Management: x Refer to Section 3.1. Precautions:

Sequence Herbicide Page 40

x If heavy rainfall occurs soon after application, cro p injury may occur, especially in poorly drained areas where water stands for several hours or days, or where the seeding still has not been properly closed. x For preplant application, to the extent possible, do not move treated soil out of the row or move untreated soil to the surface during planting, or weed control will be diminished.

USE RESTRICTIONS

1. Refer to Section 7.1 for additional product use restrictions.
2. Maximum Single Application Rate: 4.0 pt/A
3. Maximum Annual Rate: 4.0 pt/A/year a. DO NOT exceed 1.91 lb ai/A/year of S-metolachlor from Sequence Herbicide or other S- metolachlor-containing products. b. DO NOT exceed 6.0 lb ae/A/year of acid equivalents from glyphosate-containing products.
4. Make only one application per year.
5. DO NOT use on English peas in northeastern US.
6. DO NOT cut treated legume vegetables (succulent or dry) for hay within 120 days following application.
7. DO NOT graze or feed forage from treated area.
8. Preharvest Interval (PHI): Not Applicable

Sequence Herbicide Page 41

9.3.2 Tank-Mix Combinations for Legume Vegetables Application Tank-Mix Brands Use Directions Preplant Preemergence Dual Magnum Glyphosate Prowl® Tricor® Sequence Herbicide may be tank- mixed with other herbicides labeled for preplant and preemergence applications in legume vegetables.

Apply as directed according to this label and the labels of tank-mix partners. TANK-MIX USE RESTRICTIONS

1. All use restrictions cited in Section 9.3.1 for Sequence Herbicide solo apply to tank mixes with Sequence Herbicide.
2. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.

Sequence Herbicide Page 42

9.4 Peanut

Crops (including cultivars, varieties, and/or hybrids of these) Peanut Application Timing Rate (pt/A) Use Directions Preplant Application: May be applied up to 30 days prior to planting.

Preemergence Application: Apply during planting or after planting but before crop emergence. Application must be made before ground cracking. In NM, OK and TX 2.0-3.4

In the Southeast: 2.5-3.4

When weeds are dense or large, use higher rates within the range provided in Section 8.1-8.3. Also use higher rates within the range for improved residual control.

May be applied before, during, or after planting but before crop emergence

For Weed Control: x Refer to Sections 8.1-8.3 for list of weeds controlled or partially controlled. Resistance Management: x Refer to Section 3.1. Precautions: x If heavy rainfall occurs soon after application, cro p injury may occur, especially in poorly drained areas where water stands for several hours or days, or where the seeding still has not been properly closed. x For preplant application, to the extent possible, do not move treated soil out of the row or move untreated soil to the surface during planting, or weed control will be diminished. x Postemergence application to peanut will result in severe crop injury and reduced yields. USE RESTRICTIONS

1. Refer to Section 7.1 for additional product use restrictions.
2. Maximum Single Application Rate: 3.4 pt/A
3. Maximum Annual Rate: 3.4 pt/A/year a. DO NOT exceed 1.91 lb ai/A/year of S-metolachlor from Sequence Herbicide or other S- metolachlor-containing products. b. DO NOT exceed 6.0 lb ae/A/year of acid equivalents from glyphosate-containing products.
4. DO NOT graze or feed forage or fodder to livestock for 30 days following application.
5. Preharvest Interval (PHI): 90 days

Sequence Herbicide Page 43

9.5 Potato 9.5.1 Preplant or Preemergence Application Crops (including cultivars, varieties, and/or hybrids of these) Potato Application Timing Rate (pt/A) Use Directions Preplant Application: May be applied up to 30 days prior to planting.

Preemergence Application: Apply during planting or after planting but before crop emergence. For all applications use the rate for the specific soil-texture and organic matter (OM) as follows:

Coarse soils: 2.0-2.5

Medium soils <3% OM: 2.0-3.75

Fine soils >3%OM: 4.0

When weeds are dense or large, use higher rates within the range provided in Section 8.1-8.3. Also use higher rates within the range for improved residual control.

May be applied before, during, or after planting but before crop emergence.

Control of weeds may be improved by adding dry ammonium sulfate at 8.5-17 lb/100 gallons of water. For Weed Control: x Refer to Section 8.1-8.3 for list of weeds controlled or partially controlled. Tank Mix Options: x Refer to Section 9.5.2 for tank-mix options. Resistance Management: x Refer to Section 3.1. Precautions: x When applying to emerged weeds, weeds must be actively growing. x Contact with potato foliage will result in crop injury. x If cool wet conditions occur after application, Sequence Herbicide may delay maturity and/or reduce yield of ‘Superior’ or other early-maturing varieties. x For preplant application, to the extent possible, do not move treated soil out of the row or move untreated soil to the surface during planting, or weed control will be diminished.

USE RESTRICTIONS

1. Refer to Section 7.1 for additional product use restrictions.
2. Maximum Single Application Rate: 4.0 pt/A
3. Maximum Annual Rate: 4.0 pt/A/year a. DO NOT exceed 3.43 lb ai/A/year of S-metolachlor from Sequence Herbicide or other S- metolachlor-containing products. b. DO NOT exceed 6.0 lb ae/A/year of glyphosate-containing products.
4. Preharvest Interval (PHI): 60 days after at-planting application
5. DO NOT use on sweet potatoes or yams

9.5.2 Tank-Mix Combinations for Potato

Sequence Herbicide Page 44

Application Tank-Mix Brands Use Directions Preplant Preemergence Glyphosate Lorox® Prowl Tricor Sequence Herbicide may be tank-mixed with other herbicides labeled for preplant or preemergence application in potato.

Apply as directed according to this label and the labels of tank- mix partners. TANK-MIX USE RESTRICTIONS

1. All use restrictions cited in Section 9.5.1 for Sequence Herbicide solo apply to tank mixes with Sequence Herbicide.
2. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.

Sequence Herbicide Page 45

9.6 Sorghum 9.6.1 Preplant or Preemergence Application Crops (including cultivars, varieties, and/or hybrids of these) Sorghum grain, Milo (seed-treated with Concep® III safener only) Forage sorghum (seed-treated with Concep III safener only) Application Timing Rate (pt/A) Use Directions Preplant Application: May be applied up to 30 days prior to planting.

Preemergence Application: Apply during planting or after planting but before crop emergence. For all applications use the rate for the specific soil-texture and organic matter (OM) as follows:

Coarse soils: 2.0-3.5

Medium soils <3% OM: 2.0-3.75

Fine soils >3% OM: 4.0

When weeds are dense or large, use higher rates within the range provided in Section 8.1-8.3. Also use higher rates within the range for improved residual control.

Control of weeds may be improved by adding dry ammonium sulfate at 8.5-17 lb/100 gallons of water. For Weed Control: x Refer to Section 8.1-8.3 for list of weeds controlled or partially controlled. Tank Mix Options: x Refer to Section 9.6.2 for tank-mix options. Resistance Management: x Refer to Section 3.1. Precautions: x When applying to emerged weeds, weeds must be actively growing. x Contact with sorghum foliage will result in crop injury. x For preplant application, to the extent possible, do not move treated soil out of the row or move untreated soil to the surface during planting, or weed control will be diminished. USE RESTRICTIONS

1. Refer to Section 7.1 for additional product use restrictions.
2. Only apply Sequence Herbicide to seed commercially treated with Concep III safener.
3. Maximum Single Application Rate: 4.0 pt/A
4. Maximum Annual Rate: 4.0 pt/A/year a. DO NOT exceed 1.59 lb ai/A/year of S-metolachlor from Sequence Herbicide or other S- metolachlor -containing products. b. DO NOT exceed 6.0 lb ae/A/year of glyphosate-containing products.
5. Preharvest Interval (PHI): Not Applicable

Sequence Herbicide Page 46

9.6.2 Tank-Mix Combinations for Sorghum Application Tank-Mix Brands Use Directions Preplant Preemergence AAtrex Bicep Magnum® Bicep II Magnum Bicep Lite II Magnum Dicamba Dual Magnum Dual II Magnum Glyphosate Lexar EZ Lumax EZ 2,4-D Sequence Herbicide may be tank mixed with other herbicides labeled for preplant or preemergence application in sorghum treated with Concep III safener.

Apply as directed according to this label and the labels of tank- mix partners. TANK-MIX USE RESTRICTIONS

1. All use restrictions cited in Section 9.6.1 for Sequence Herbicide solo apply to tank mixes with Sequence Herbicide.
2. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.

Sequence Herbicide Page 47

9.7 Soybeans 9.7.1 Fall, Preplant or Preemergence Application Crops (including cultivars, varieties, and/or hybrids of these) Soybeans Application Timing Rate (pt/A) Use Directions Fall Application For use in minimum or no- tillage systems only in IA, MN, ND, SD, WI, and portions of NE and IL. Medium soils > 2.5% organic matter: 4.0 pt/A tank mixed with ½-¾ pt/A Dual Magnum Herbicide or Dual II Magnum Herbicide

Fine soils > 2.5% organic matter: 4.0 pt/A tank mixed with ¾ pt/A Dual Magnum Herbicide or Dual II Magnum Herbicide

Apply to crop stubble after harvest when the sustained soil temperature at a 4-inch depth is less than 55°F and falling.

Time application according to the following geographic schedule:

After September 30 in ND, SD, MN, WI and north of Route 30 in IA.

After October 15 north of Route 91 in NE and south of Route 30 in IA.

After October 31 north of Route 136 in IL.

A fall and/or a spring tillage may follow application, but do not exceed an incorporation depth greater than 2- 3 inches. Minimize furrow and ridge formation in the tillage operations. Includes application to soybeans.

May be applied before, during, or after planting but before crop emergence

Preplant Application: May be applied up to 30 days prior to planting.

Preemergence Application: Apply during planting or after planting but before crop emergence. For all applications use the rate for the specific soil-texture and organic matter (OM) as follows:

Coarse soils: 2.5-3.5; <3% OM 3.5; >3% OM

Medium soils: 3.5-4.0

Fine soils: 3.5-4.0; <3% OM 4.0-4.5; >3% OM

When weeds are dense or large, use higher rates within the range provided in Section 8.1-8.3. Also use higher rates within the range for improved residual control.

Sequence Herbicide Page 48

For Weed Control: x Refer to Section 8.1-8.3 for list of weeds controlled or partially controlled. Tank Mix Options: x Refer to Section 9.7.3 for tank-mix options. Resistance Management: x Refer to Section 3.1. Precaution: x For preplant application, to the extent possible, do not move treated soil out of the row or move untreated soil to the surface during planting, or weed control will be diminished. USE RESTRICTIONS

1. Refer to Section 7.1 for additional product use restrictions.
2. Maximum Single Application Rate: 4.5 pt/A.
3. Maximum Annual Rate: 9.8 pt/A/year a. DO NOT exceed 3.71 lb ai/A/year of S-metolachlor from Sequence Herbicide or other S- metolachlor -containing products. b. DO NOT exceed 6.0 lb ae/A/year of acid equivalents from glyphosate-containing products.
4. The combined total amount of Sequence Herbicide from all applications in the fall plus spring must not exceed the maximum allowed annual rate.
5. DO NOT exceed 9.8 pt/A in combined spring and fall applications.
6. DO NOT feed treated forage or hay to livestock for 30 days following a preplant or preemergence application.
7. DO NOT apply on frozen ground.
8. Preharvest Interval (PHI): Not Applicable

Sequence Herbicide Page 49

9.7.2 Postemergence Over-The-Top Application on Glyphosate-Resistant Soybeans Crops (including cultivars, varieties, and/or hybrids of these) Soybeans, glyphosate-resistant Application Timing Rate (pt/A) Use Directions Postemergence over-the- top on glyphosate-resistant soybeans.

Apply from cracking up to 75 days before harvest. 2.5-4.5

When weeds are dense or large, use higher rates within the range provided in Section 8.1-8.3. Also use higher rates within the range for improved residual control.

Use only water as the carrier. For Weed Control: x Refer to Section 8.1-8.3 for list of weeds controlled or partially controlled. Tank Mix Options: x Refer to Section 9.7.3 for tank-mix options. Resistance Management: x Refer to Section 3.1. Precautions: x Glyphosate-resistant soybean leaves treated postemergence may exhibit necrotic spotting, leaf crinkling/curling and stunting. This does not affect normal plant growth and crop yield. USE RESTRICTIONS

1. Refer to Section 7.1 for additional product use restrictions.
2. Maximum Single Application Rate: 4.5 pt/A
3. DO NOT make more than 1 postemergence application per year.
4. Maximum Annual Rate: 9.8 pt/A/year a. DO NOT exceed 3.71 lb ai/A/year of S-metolachlor-containing products. b. DO NOT exceed 6.0 lb ae/A/year of acid equivalents from glyphosate-containing products.
5. The combined total amount of Sequence Herbicide from all applications in the fall plus spring must not exceed the maximum allowed annual rate.
6. DO NOT use Sequence Herbicide postemergence on glyphosate-resistant soybeans if plants are under any type of stress including but not limited to drought, insect, disease, or injury from cultivation.
7. DO NOT graze or feed treated forage or hay to livestock following a postemergence application.
8. Preharvest Interval (PHI): 75 days

Sequence Herbicide Page 50

9.7.3 Tank-Mix Combinations for Soybeans Application Tank-Mix Brands Use Directions Preplant Preemergence Boundary® Dual II Magnum Flexstar® Fusilade® DX Fusion® Glyphosate Reflex® Warrior Insecticide with Zeon Technology Sequence Herbicide may be tank-mixed with other herbicides labeled for preplant, preemergence, or postemergence application in soybeans.

Apply as directed according to this label and the labels of tank-mix partners. Postemergence

For use on glyphosate- resistant soybeans Besiege Dual Magnum Dual II Magnum Endigo ZC Flexstar Fusilade DX Fusion Glyphosate Reflex Warrior Insecticide with Zeon Technology Precaution: x Broad spectrum insecticide in tank mixes can cause flare-ups of secondary pests under certain conditions. Only use when pest populations have reached economic threshold. TANK-MIX USE RESTRICTIONS

1. All use restrictions cited in Section 9.7.1 and 9.7.2 for Sequence Herbicide solo apply to tank mixes with Sequence Herbicide.
2. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.

Sequence Herbicide Page 51

9.8 Sugar Beet Crops (including cultivars, varieties, and/or hybrids of these) Sugar beet, glyphosate-resistant Application Timing Rate (pt/A) Use Directions Postemergence Application: 1 true-leaf stage of sugar beet to canopy closure

Coarse soils: 2.5-3.0

Medium and Fine soils: 3.0-3.7

When weeds are dense or large, use higher rates within the range provided in Section 8.1-8.3. Also use higher rates within the range for improved residual control.

Apply over the top of the crop.

Control of annual and perennial weeds may be improved by adding dry ammonium sulfate at 1.0 to 2% by weight or 8.5-17.0 lb/100 gallons of water. Liquid formulations of AMS may be used at an equivalent rate.

Do not reduce use rates when using AMS. For Weed Control: x Refer to Section 8.1-8.3 for list of weeds controlled or partially controlled. Resistance Management: x Refer to Section 3.1. Precautions: x Applications to sugar beet varieties which are not glyphosate-resistant will result in severe crop injury and reduced yields. x Applications to sugar beet in tank-mixture with fungicides and/or insecticides may result in unacceptable crop injury USE RESTRICTIONS

1. Refer to Section 7.1 for additional product use restrictions.
2. Maximum Single Application Rate: 3.7 pt/A
3. Minimum Application Interval: 10 days
4. Maximum Annual Rate: 7.0 pt/A/year a. DO NOT exceed 2.63 lb ai/A/year of S-metolachlor from Sequence Herbicide or other S- metolachlor -containing products. b. DO NOT exceed 6.0 lb ae/A/year of glyphosate-containing products.
5. DO NOT make more than 4 applications per year.
6. Preharvest Interval (PHI): 60 days

Sequence Herbicide Page 52

9.9 Sunflower 9.9.1 Preplant or Preemergence Application Crops (including cultivars, varieties, and/or hybrids of these) Sunflower Application Timing Rate (pt/A) Use Directions Preplant Application: Apply up to 30 days before planting.

Preemergence Application: Apply during planting or after planting but before crop emergence. 2.5-2.75

When weeds are dense or large, use higher rates within the range provided in Section 8.1-8.3. Also use higher rates within the range for improved residual control.

Make only one application preplant or preemergence.

Control of weeds may be improved by adding dry ammonium sulfate at 8.5-17 lb/100 gallons of water. For Weed Control: x Refer to Section 8.1-8.3 for list of weeds controlled or partially controlled. Tank Mix Options: x Refer to Section 9.9.2 for tank-mix options. Resistance Management: x Refer to Section 3.1. Precautions: x Avoid contact with sunflower foliage. x For preplant application, to the extent possible, do not move treated soil out of the row or move untreated soil to the surface during planting, or weed control will be diminished. USE RESTRICTIONS

1. Refer to Section 7.1 for additional product use restrictions.
2. Maximum Single Application Rate: 2.75 pt/A
3. Maximum Annual Rate: 2.75 pt/A/year a. DO NOT exceed 1.9 lb ai/A/year of S-metolachlor-containing products. b. DO NOT exceed 6.0 lb ae/A/year of acid equivalent from glyphosate-containing products.
4. DO NOT make more than one application per year.
5. DO NOT graze or feed forage from treated area.
6. Preharvest Interval (PHI): Not Applicable

Sequence Herbicide Page 53

9.9.2 Tank-Mix Combinations for Sunflower Application Tank-Mix Brands Use Directions Preplant Preemergence Eptam® Prowl Trifluralin Sequence Herbicide may be tank-mixed with other herbicides labeled for preplant, preemergence, or postemergence application in sunflower.

Can be used for control or suppression of annual and perennial weeds.

Apply as directed according to this label and the labels of tank- mix partners.

Apply Sequence Herbicide at 2.75 pt/A in these tank mixes.

For control or suppression of dense populations of weeds greater than 12 inches in height or weeds under stress, consider use rates at the higher end of the rate range. TANK-MIX USE RESTRICTIONS

1. All use restrictions cited in Section 9.9.1 for Sequence Herbicide solo apply to tank mixes with Sequence Herbicide.
2. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.

Sequence Herbicide Page 54

9.10 Tomato 9.10.1 Transplanted Crops (including cultivars, varieties, and/or hybrids of these) Tomato, transplanted Application Timing Rate (pt/A) Use Directions Preplant application up to 30 days before transplanting

For all applications use the rate for the specific soil-texture and organic matter (OM) as follows:

Coarse soils <3% OM: 2.5-3.25

Coarse soils >3% OM: 3.25

Medium soils: 3.25–4.0 pt/A.

Fine soils <3% OM: 3.25–4.0

Fine soils >3% OM: 4.0–5.0

If heavy weed infestations are present or are expected, use higher rates within the range provided in Section 8.1-8.3. Also use higher rates within the range for improved residual control. Apply non-incorporated to the top of the pressed bed, as the last step prior to laying plastic.

Control of weeds may be improved by adding dry ammonium sulfate at 8.5-17 lb/100 gallons of water. For Weed Control: x Refer to Section 8.1-8.3 for list of weeds controlled or partially controlled. Tank Mix Options: x Refer to Section 9.10.2 for tank-mix options. Resistance Management: x Refer to Section 3.1. Precautions: x Sequence Herbicide may be applied before transplanting. Keep soil disturbance to a minimum during transplanting operation. x Sequence Herbicide may damage transplants that have been weakened by any cause. To prevent damage, plant only healthy transplants. Do not plant when wet, cold, or unfavorable growing conditions exist. x Do not apply to varieties or cultivars with unknown tolerance to Sequence Herbicide. USE RESTRICTIONS

1. Refer to Section 7.1 for additional product use restrictions.
2. Maximum Single Application Rate: 5.0pt/A
3. Maximum Annual Rate: 5.0 pt/A/year a. DO NOT exceed 1.9 lb ai/A/year of S-metolachlor-containing products.
4. DO NOT exceed 6.0 lb ae/A/year of glyphosate-containing products. DO NOT exceed the maximum label rates in the Use Directions for transplanted tomatoes for the soil type.
5. DO NOT exceed the maximum label rate for the soil texture per year.
6. Apply only by ground application.
7. DO NOT graze or feed forage from treated area.
8. Preharvest Interval (PHI): 90 days

Sequence Herbicide Page 55

9.10.2 Tank-Mix Combinations for Transplanted Tomato Application Tank-Mix Brands Use Directions Preplant Command® Devrinol® Fusilade DX Goal™ Lexone® Prowl Tricor Sequence Herbicide may be tank-mixed with other herbicides labeled for preplant or preemergence application in tomato, transplanted.

Can be used for control or suppression of annual and perennial weeds.

Apply as directed according to this label and the labels of tank- mix partners.

Apply Sequence Herbicide at 2.4–5.0 pt/A as directed in Section 9.10.1 in these tank mixes.

For control or suppression of dense populations of weeds greater than 12 inches in height or weeds under stress, consider use rates at the higher end of the rate range. TANK-MIX USE RESTRICTIONS

1. All use restrictions cited in Section 9.10.1 for Sequence Herbicide solo apply to tank mixes with Sequence Herbicide.
2. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.

Sequence Herbicide Page 56

10.0 STORAGE AND DISPOSAL

STORAGE AND DISPOSAL

Do not contaminate water, food, or feed, by storage or disposal.

Pesticide Storage Keep container closed to prevent spills and contamination.

Pesticide Disposal Open dumping is prohibited. Wastes resulting from the use of this product are toxic. Improper disposal of unused pesticide, spray mixture, or rinsate is a violation of federal law. Pesticide, spray mixture, or rinsate that cannot be used according to label instructions must be disposed of according to federal, state, or local procedures. For guidance in proper disposal methods, contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste representative at the nearest EPA Regional Office.

Container Handling [less than or equal to 5 gallons] Non-refillable container. Do not reuse or refill this container. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container ¼ full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures approved by state and local authorities.

Container Handling [greater than 5 gallons] Refillable container. Refill this container with pesticide only. Do not reuse the container for any other purpose. Cleaning the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility of the refiller. To clean container before final disposal, empty the remaining contents from container into application equipment or mix tank. Fill container about 10 percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times. Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures approved by state and local authorities. If the container is damaged, leaking or obsolete, contact Syngenta Crop Protection, LLC at 1- 800-888-8372.

Sequence Herbicide Page 57

Container Handling [greater than 5 gallons] Non-refillable container. Do not reuse or refill this container. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container ¼ full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeat this procedure two more times. Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures approved by state and local authorities.

For minor spills, leaks, etc., follow all precautions indicated on this label and clean up immediately. Take special care to avoid contamination of equipment and facilities during cleanup procedures and disposal of wastes. In the event of a major spill, fire, or other emergency, call 1-800-888-8372, day or night.

CONTAINER IS NOT SAFE FOR FOOD, FEED, OR DRINKING WATER.

Sequence Herbicide Page 58

11.0 CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation of Warranty and Liability before buying or using this product. If the terms are not acceptable, return the product at once, unopened, and the purchase price will be refunded.

The Directions for Use of this product must be followed carefully. It is impossible to eliminate all risks inherently associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences may result because of such factors as manner of use or application, weather or crop conditions, presence of other materials or other influencing factors in the use of the product, which are beyond the control of SYNGENTA CROP PROTECTION, LLC or Seller. To the extent permitted by applicable law, Buyer and User agree to hold SYNGENTA and Seller harmless for any claims relating to such factors.

SYNGENTA warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes stated in the Directions for Use, subject to the inherent risks referred to above, when used in accordance with directions under normal use conditions. To the extent permitted by applicable law: (1) this warranty does not extend to the use of the product contrary to label instructions, or under conditions not reasonably foreseeable to or beyond the control of Seller or SYNGENTA, and (2) Buyer and User assume the risk of any such use. To the extent permitted by applicable law, SYNGENTA MAKES NO WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR IMPLIED WARRANTY EXCEPT AS WARRANTED BY THIS LABEL.

TO THE EXTENT PERMITTED BY APPLICABLE LAW, in no event shall SYNGENTA be liable for any incidental, consequential or special damages resulting from the use or handling of this product. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY OF SYNGENTA AND SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES (INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SHALL BE THE RETURN OF THE PURCHASE PRICE OF THE PRODUCT OR, AT THE ELECTION OF SYNGENTA OR SELLER, THE REPLACEMENT OF THE PRODUCT.

SYNGENTA and Seller offer this product, and Buyer and User accept it, subject to the foregoing Conditions of Sale and Limitation of Warranty and Liability, which may not be modified except by written agreement signed by a duly authorized representative of SYNGENTA.

Sequence Herbicide Page 59

12.0 APPENDIX 12.1 Tank-Mix Partner Table Product Name EPA Registration Number Active Ingredient(s) 2,4-D 1381-102 2,4-D 2,4-DB 1381-215 2,4-DB AAtrex® 100-497 & 100-585 atrazine Authority 279-3146 sulfentrazone Authority Broadleaf 279-3179 sulfentrazone + chlorimuron ethyl Bicep® Magnum 100-886 S-metolachlor + atrazine Bicep® II Magnum 100-817 atrazine + S-metolachlor Bicep® Lite II Magnum 100-827 atrazine + S-metolachlor Boundary 100-1162 metribuzin + S-metolachlor Callisto® 100-1131 mesotrione Canopy® 353-444 Metribuzin + chlorimuron ethyl Canopy® XL 352-589 sulfentrazone + chlorimuron ethyl Caparol® 100-620 prometryn Capture® 279-3302 bifenthrin Centric® 100-1147 thiamethoxam Clarity® 7060-137 dicamba Classic® 352-436 chlorimuron ethyl Command® 279-3158 clomazone Cotoran® 66222-181 fluometuron Devrinol® 70506-301 napropamide Direx® 66222-54 diuron Dual® Magnum 100-816 S-metolachlor Dual® II Magnum 100-818 S-metolachlor FirstRate® 62719-275 cloransulam-methyl Flexstar® 100-1101 fomesafen Frontier 7969-144 dimethenamid Fusilade® DX 100-1070 fluazifop-p-butyl Fusion® 100-1059 fluazifop-p-butyl + fenoxaprop-p-ethyl Glyphosate Multiple brands Multiple brands Goal® 62719-424 oxyfluorfen Intruder® 8033-23-70506 acetamiprid Karate with Zeon Technology 100-1097 lambda-cyhalothrin Karmex 66222-51 diuron Lexar® 100-1414 atrazine + S-metolachlor + mesotrione Linex® 81842-21 linuron Lorox® 61842-23 linuron Lumax® 100-1442 atrazine + S-metolachlor + mesotrione Mustang® Maxx 279-3426 zeta-cypermethrin Orthene® 5481-8978 acephate Princep® 100-526 simazine Prowl® 241-337 pendimethalin Pursuit® 241-310 imazethapyr Pursuit Plus 241-315 ammonium salt of imazethapyr + pendimethalin Python® 62719-277 flumetsulam

Sequence Herbicide Page 60

Reflex® 100-993 fomesafen Scepter® 5481-610 imazaquin Spartan® 279-3220 sulfentrazone Steel 241-376 imazaquin + imazethapyr + pendimethalin Storm® 70506-59 bentazon + acifluorfen Tricor® 70506-103 metribuzin Trifluralin 34704-792 trifluralin Trimax 264-783 imidacloprid Staple® 353-613 pyrithiobac-sodium Warrior with Zeon Technology® 100-1295 lambdacyhalothrin Zemax 100-1410 S-metolachlor + mesotrione

12.2 Sequence Herbicide Use Summary Table [Optional Text] [Start of Optional Text] IMPORTANT: The table below is a summary of the Crop Use Directions for Sequence Herbicide. However, it is important for the user to read and follow the complete instructions contained within this label.

Sequence Herbicide Page 61

Crop or Crop Group Subgroup with examples Maximum Single Application Rate of Active Ingredient from Sequence Herbicide (lb ai/A) Maximum Annual Application Rate of Glyphosate and S-metolachlor Rate (lb ai/A/year) Preharvest Interval (PHI days) Glyphosate S-Metolachlor Glyphosate S-Metolachlor Corn Preplant Preemergence 1.13 1.5 6.0 3.71 NA Corn Postemergence Applications on Glyphosate- Resistant Corn 1.04 1.4 6.0 3.71 50 Sweet Corn Ears: 30 Cotton Preplant Preemergence 0.98 1.3 6.0 2.48 NA Cotton Postemergence over-the-top Application on Glyphosate - Resistant Cotton 0.98 1.3 6.0 2.48 100 Legume Vegetables (Succulent or Dried), Crop Group 6, except Soybean Chickpea English pea Lima Bean 1.13 1.5 6.0 1.91 NA Peanut 0.96 1.3 6.0 1.91 90 Potato 1.13 1.5 6.0 3.43 60 after at plant application Sorghum 1.13 1.5 6.0 1.59 NA Soybean 1.27 1.69 6.0

3.71 75 Sugar Beet 1.04 1.39 6.0 2.63 60 Sunflower 0.77 1.0 6.0 1.91 NA Tomato 1.4 1.9 6.0 1.91 90

[End of Optional Text]

AAtrex®, Acuron®, Acuron® Flexi, Besiege®, Bicep Lite II Magnum®, Bicep II Magnum®, Bicep Magnum®, Boundary®, Callisto®, Caparol®, Concep®, Dual Magnum®, Dual II Magnum®, Endigo ZC®, Flexstar®, Fusilade® DX, Fusion®, Lexar® EZ, Lumax® EZ, Princep®, Reflex®, Sequence® Herbicide, Warrior Insecticide with Zeon Technology® and the SYNGENTA Logo are Trademarks of a Syngenta Group Company.

Command ® is a trademark of FMC Corporation.

Devrinol® and Tricor® are trademarks of United Phosphorus, Inc.

Sequence Herbicide Page 62

Eptam® is a trademark of Gowan Company, LLC.

Goal™ is a trademark of Dow AgroSciences.

Lexone ® is a trademarks of E. I. du Pont de Nemours & Co., Inc.

Lorox ® is a trademark of Tessenderlo Kerley, Inc.

Prowl ® is a trademark of BASF Corporation.

Roundup Ready ® is a trademark of Monsanto Company.

Viton™ is a trademark of The Chemours Company FC, LLC.

©20XX Syngenta

For non-emergency (e.g., current product information), call Syngenta Crop Protection at 1-800-334-9481.

Manufactured for: Syngenta Crop Protection, LLC P.O. Box 18300 Greensboro, North Carolina, 27419-8300

SCP XXXX

Sequence Herbicide 1185 MAS 0123 AMEND AUG2024-CL - di – 8/8/2024 000100-01185.20240819.Sequence_Herbicide.AMEND.AUG2024-CL