crop-chem-docs/corpus/epa_ppls/228-488.md

NUPRID 1.6 F INSECTICIDE

• EPA Reg No: 228-488
• Registrant: NUFARM AMERICAS, INC.
• Signal word: Caution
• Active ingredients: Imidacloprid (17.4%)
• Label accepted: 2014-05-06
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000228-00488-20140506.pdf

---

UNITED STATES ENVIRONMENTAL PROTECTION AGENCY WASHINGTON, D.C. 20460 OFFICE OF CHEMICAL SAFETY AND ' POLLUTION PREVENTION MAY - 6 2014 Carrie M. Tackema Nufarm Americas Inc. 4020 Aerial Center Parkway, Suite 101 Morrisville, NC 27560 Subject: Notification to include two optional marketing claims "Nufarm Grow a better tomorrow", "Grow a better tomorrow" per PRN 98-10 Dear Ms. Tackema: The Agency is in receipt of your Application for Pesticide Notification under Pesticide Registration Notice (PRN) 98-10, dated April 23, 2014, for "Nuprid 1.6F Insecticide," EPA Reg. No. 228-488. The Registration Division (RD) has conducted a review of your request for applicability under PRN 98-10, and finds that the action requested falls within the scope of PRN 98-10. The label submitted with your application has been stamped "Notification" and added to the product record. If you have any questions, please contact me directly at 703-347-0559 or email me at marchese.jacquelyn@epa.gov. Sincerely, Jacquelyn Marchese Entomologist Insecticide-Rodenticide Branch Registration Division (7505P) Office of Pesticide Programs Page 1 of 1

EXPEDITE (3*3 S EPA United States Environmental Protection Agency Washington, DC 20460 D Registration D Amendment [S Other: OPP Identifier Number Application for Pesticide - Section I

1. Company/Product Number 228-488
2. Company/Product (Name) Nuprid 1.6F Insecticide
3. Name and Address of Applicant (Include ZIP Code) Nufarm Americas, Inc. 11901 S. Austin Avenue Alsip, IL 60803 Please send all correspondence to "contact ooint" listed below
4. EPA Product Manager Venus Eagle PM# 1
5. Proposed Classification ^| None 1 1 Restricted
6. Expedited Review. In accordance with FIFRA Section 3(c)(3) (b)(l), my product is similar or identical in composition and labeling to: EPA Reg. No. Product Name NOTIFICATION MA¥-.6 ?m/,Section - II I I Amendment - Explain below. I | Resubmission in response to.Agency letter dated ^J Notification - Explain below. I I Final printed labels I I "Me Too" Application LJ Other - Explain below Explanation: Use additional page(s) if necessary. (For Section I and Section II.) NOTIFICATION PER PRN 98-10 This notification is consistent with the provisions of PR Notice 98-10 and EPA regulations at 40 CFR 152.46, and no other changes have been made to the labeling or the confidential statement of formula of this product. I understand that it is a violation of 18 U.S.C. Sec. 1001 to willfully make any false statement to EPA. I further understand that if this notification is not consistent with the terms of PR Notice 98-10 and 40 CFR 152.46, this product may be in violation of FIFRA and I may be subject to enforecement action and penatlies under sections 12 and 14 of FIFRA. CONTACT: Carrie M. Tackema (919) 379-2528 or carrie.tackematojus. n uf arm .com Nufarm Americas, Inc. 4020 Aerial Center Parkway, Suite 101 Morrisville, NC 27560
7. Material This Product Will Be Packaged In: Child-Resistant Packaging CH Yes* £3 No

• Certification must be submitted Unit Packaging D Yes £<] No If "Yes" No. per Unit Packaging wgt. container

3. Location of Net Contents Information IXI Label I I Container Water Soluble Packaging D No If "Yes" Package wgt.
4. Size(s) Retail Container 16, 32, 64 fl. oz.; 1, 2.5, 220, 250 gal. No. per container
5. Type of Container CD Metal [X] Plastic I I Glass | | Paper D Other
6. Location of Label Directions •IEI On Label cccccc I I On labeling accompaioy.:Rg;product
7. Manner in Which Label is Affixed to Product O Lithograph ^ Paper glued D Stenciled Other Section - IV
8. Contact Point (Complete items directly below for identification of individual to be contacted, if necessary, to process this application) Name Carrie M. Tackema Title Regulatory Manager Telephone No. (Include Area Code) (919) 37t?-c2528 Certification I certify that the statements I have made on this form and all attachments thereto are true, accurate and complete. I acknowledge that any knowingly false or misleading statement may be punishable by fine or imprisonment or both under applicable law. ,Si9™,»e ^_^^
9. Typed Name Carrie M. Tackema
10. Title Regulatory Manager
11. Date April 23, 2014
12. Date ApplicationC c £-" Received ' '(Stamped)

Via Courier Delivery April 23, 2014 Ms. Venus Eagle, PM#1 Document Processing Desk (NOTIF) Office of Pesticide Programs (7504P) U. S. Environmental Protection Agency Room S-4900, One Potomac Yard 2777 S. Crystal Drive Arlington, VA 22202-4501 +1 919.379.251'

• 1 919.467.592: 4020 Aerial Center Parkway, Suite 10 Morrisville, NC 2756< www.nufarm.con RE: NOTIFICATION(s) per PRN 98-10 Nuprid 2 F Insecticide Mallet 2F Insecticide/Grub Ex Pro Mantra 2F Insecticide Nuprid 1.6F Insecticide Mallet 0.2% on Fertilizer Mallet 0.5 G Insecticide Mallet 2.5 G Insecticide Mallet 0.2 Granular Insecticide Mantra 1G Greenhouse and Nursery Insecticide Mallet 1 .47% Concentrate Nuprid 4.6F Insecticide Nuprid 4F Insecticide Nuprid-S WG Atera GC 2+1 SC Insecticide Mallet 7.1% PF Insecticide Nuprid 2SC Soil/Foliar Insecticide Mallet 0.2 G Mallet 75 WP Mantra 60 WSP Mallet 2F T&O Insecticide Kilter Insecticide Bounty Turf and Ornamental Insecticide EPA Reg. No. 228-484 EPA Reg. No. 228-485 EPA Reg. No. 228-486 EPA Reg. No. 228-488 EPA Reg. No. 228-500 EPA Reg. No. 228-501 EPA Reg. No. 228-502 EPA Reg. No. 228-510 EPA Reg. No. 228-523 EPA Reg. No. 228-525 EPA Reg. No. 228-527 EPA Reg, No. 228-528 EPA Reg. No. 228-529 EPA Reg. No. 228-557 EPA Reg. No. 228-562 EPA Reg. No. 228-572 EPA Reg. No. 228-587 EPA Reg. No. 228-588 EPA Reg. No. 228-681 EPA Reg. No. 228-695 EPA Reg. No. 228-717 EPA Reg. No. 1001-82 Dear Ms. Eagle: Enclosed please find twenty-two (22) application(s) for pesticide registration NOTIFICATION for the above-referenced product(s). The purpose of these NOTIFICATION(s) is to include two (2) optional marketing claims: Nufarm Grow a better tomorrow Grow a better tomorrow

Page 2 of 2 These NOTIFICATION(s) are consistent with PRN 98-10; specifically, II N. In support of these NOTIFICATION(s) enclosed are the following: « EPA form 8570-1 Application for Pesticide Registration - NOTIFICATION; and • Proposed product labeling in PDF format on CD-rom. Please contact me at directly at (919) 379-2528 or by email at carrie.tackema@us.nufarm.com if you have any questions regarding this action. Since(ely, \ f / -.Carrie M. Tackema Regulatory Manager Enclosure(s)

GROUP EH INSECTICIDE NUPRID"1.6FINSECTICIDE FOR CONTROL OF CERTAIN INSECTS INFESTING LISTED CROPS ACTIVE INGREDIENT: Imidacloprid, 1 [(6-Chloro-3-pyridinyl)methyl]-A/-nitro-2-imidazolidinimine 17.4% OTHER INGREDIENTS: ..82.6% TOTAL: 100.0% Contains 1.6 pounds of imidacloprid per gallon KEEP OUT OF REACH OF CHILDREN CAUTION - PRECAUCION Si usted no entiende la etiqueta, busque a alguien para que se teexplique a usted en detalle. (If you do not understand the label, find someone to explain it to you in detail.) SEE INSIDE BOOKLET FOR FIRST AID AND ADDITIONAL PRECAUTIONARY STATEMENTS For Chemical Spill, Leak, Fire, or Exposure, Call CHEMTREC (800) 424-9300 For Medical Emergencies Only, Call (877) 325-1840 Manufactured For Nufarm Americas Inc. EPA REG. NO. 228-488 11901 South Austin Avenue EPA EST. NO. Alsip, IL 60803 Nufarm SHAKE WELL BEFORE USING NET CONTENTS GALS. ( Liters) [Nufarm: Grow a better tomorrow] MAY _ g 2014 [Grow a better tomorrow] 000228-00488.20140423.NOTIF

PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS AND DOMESTIC ANIMALS CAUTION - PRECAUCIONHarmful if absorbed through skin. Harmful if inhaled. Harmful if swallowed. Avoid contact with skin, eyes, or clothing. Wear long-sleeved shirt and long pants, socks, shoes and chemical-resistant gloves. Avoid breathing spray mist. FIRST AID IF ON SKIN OR CLOTHING IF INHALED IF SWALLOWED • Take off contaminated clothing. • Rinse skin immediately with plenty of water for 1 5 to 20 minutes. • Call a poison control center or doctor for treatment advice. • Move the person to fresh air. • If person is not breathing, call 91 1 or an ambulance, then give artificial respiration, preferably mouth-to- mouth if possible. • Call a poison control center or doctor for further treatment advice. • Call a poison control center or doctor immediately for treatment advice. • Have person sip a glass of water if able to swallow. • DO NOT induce vomiting unless told to do so by the poison control center or doctor. • DO NOT give anything by mouth to an unconscious person. HOT LINE NUMBER Have the product container or label with you when calling a poison control center or doctor, or going for treatment. You may also contact 1-877-325-1840 for emergency medical treatment information. NOTE TO PHYSICIAN No specific antidote is available. Treat the patient symptomatically. PERSONAL PROTECTIVE EQUIPMENT (PPE) Applicators and Other Handlers Must Wear: • Long-sleeved shirt and long pants. « Chemical-resistant gloves made of any waterproof material such as, barrier laminate, butyl rubber, nitrile rubber, neoprene rubber, natural rubber, polyethylene, polyvinylchloride (PVC) orviton. • Shoes plus socks. Follow manufacturer's instructions for cleaning/ maintaining personal protective equipment, PPE. If no such instructions for washables, use detergent and hot water. Keep and wash PPE separately from other laundry. ENGINEERING CONTROLS STATEMENTS When handlers use closed systems or enclosed cabs in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d) (4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS. USER SAFETY RECOMMENDATIONS Users Should: « Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum or using tobacco. • Remove and wash contaminated clothing before reuse. ENVIRONMENTAL HAZARDS DO NOT apply directly to water, areas where surface water is present or to intertidal areas below the mean high water mark. DO NOT contaminate water when disposing of equipment washwaters. This product is highly toxic to bees exposed to direct treatment or residues on blooming crops/plants or weeds. DO NOT apply this product or allow it to drift to blooming crops/plants or weeds if bees are foraging the treatment area. This product is toxic to wildlife and highly toxic to aquatic invertebrates. This chemical demonstrates the properties and characteristics associated with chemicals detected in groundwater. The use of this chemical in areas where soils- are permeable, particularly where the water table is shallow, may result in groundwater contamination.

PROTECTION OF POLLINATORS to EXIST FOR THIS PRODUCT BECAUSE OF RISK TO BEES AND OTHER INSECT POLLINATORS. FOLLOW APPLICATION RESTRICTIONS FOUND IN THE DIRECTIONS FOR USE TO PROTECT POLLINATORS. Look for the bee hazard icon NX in the Directions for Use for each application site for specific use restrictions and instructions to protect bees and other insect pollinators. This product can kill bees and other insect pollinators. Bees and other insect pollinators will forage on plants when they flower, shed pollen, or produce nectar. Bees and other insect pollinators can be exposed to this pesticide from: o Direct contact during foliar applications, or contact with residues on plant surfaces after foliar applications o Ingestion of residues in nectar and pollen when the pesticide is applied as a seed treatment, soil, tree injection, as well as foliar applications. When Using This Product Take Steps To: o Minimize exposure of this product to bees and other insect pollinators when they are foraging on pollinator attractive plants around the application site. o Minimize drift of this product on to beehives or to off-site pollinator attractive habitat. Drift of this product onto beehives or off-site to pollinator attractive habitat can result in bee kills. Information on protecting bees and other insect pollinators may be found at the Pesticide Environmental Stewardship website at: http://pesticidestewardship.org/PollinatorProtection/Pages/default.aspx. Pesticide incidents (for example, bee kills) should immediately be reported to the state/tribal lead agency. For contact information for your state, go to: www.aapco.org/officials.html. Pesticide incidents should also be reported to the National Pesticide Information Center at: www.npic.orst.edu or directly to EPA at: beekill@epa.gov

OBSERVE THE FOLLOWING PRECAUTIONS WHEN MIXING AND APPLYING IN THE VICINITY OF AQUATIC AREAS SUCH AS LAKES; RESERVOIRS; RIVERS; PERMANENT STREAMS, MARSHES OR NATURAL PONDS; ESTUARIES AND COMMERCIAL FISH FARM PONDS. SPRAY DRIFT MANAGEMENT The responsibility of avoiding spray drift is with the applicator. The applicator is responsible for considering weather- related factors and the interaction of application equipment when making application decisions. Mixing and Loading Requirements To avoid potential contamination of groundwater, use a properly designed and maintained containment pad for mixing and loading of any pesticide into application equipment. If containment pad is not used, maintain a minimum distance of 25 feet between mixing and loading area and potential surface to groundwater conduits such as field sumps, uncased well heads, sink-holes, or field drains. Aerial Applications The spray boom should be mounted on the aircraft so as to minimize drift caused by wing tip vortices. The minimum practical boom length should be used, and must not exceed 75% of the wing span or rotor diameter. Importance of Droplet Size The droplet size is an important factor and can influence drift. Small droplets (<150 - 200 microns) drift to a greater extent than large droplets. Applications typically should be made to deliver the largest droplet range that provides adequate control and coverage. Formation of very small droplets may be minimized by appropriate nozzle selection. Wind Speed Restrictions Drift potential increases at wind speeds of less than 3 mph (due to inversion potential) or more than 10 mph. However, many factors, including droplet size, canopy and equipment specifications determine drift potential at any given wind speed. DO NOT apply when winds are greater than 15 mph and avoid gusty and windless conditions. Restrictions During Temperature Inversions DO NOT make aerial or ground applications during temperature inversions. Drift potential is high during temperature inversions. Temperature inversions typically restrict vertical air mixing, which then could cause small suspended droplets to remain close to the ground and move laterally in a concentrated cloud. Temperature inversions typically are characterized by increasing temperature with altitude and are common on nights with limited cloud cover and light to no wind. They begin to form as the sun sets and often continue into the morning. Their presence can be indicated by ground fog; however if fog is not present, inversions can also be identified by the movement of smoke from a ground source. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical mixing. Airblast (Air Assist) Specific Recommendations for Tree Crops and Vineyards Airblast sprayers carry droplets into the canopy of trees/vines via a radially, or laterally directed air stream. The following specific drift management practices should be followed: « Adjust deflectors and aiming devices so that spray is only directed into the canopy; • Block off upward-pointed nozzles when there is no overhanging canopy; « Use only enough air volume to penetrate the canopy and provide good coverage; . DO NOT allow the spray to go beyond the edge of the cultivated area (i.e., turn off sprayer when turning at end rows); • Only spray inward, toward the orchard or vineyard, for applications to the outside rows. No-Spray Zone Requirements for Foliar Applications DO NOT apply by ground within 25 feet or by air within 150 feet of lakes; reservoirs; rivers; permanent streams, marshes or natural ponds; estuaries and commercial fish farm ponds. Runoff Management DO NOT cultivate within 10 feet of the aquatic areas to allow growth of a vegetative filter strip. When using this product on erodible soils, employ Best Management Practices for minimizing runoff. Endangered Species Notice Under the Endangered Species Act, it is a Federal Offense to use any pesticide in a manner that results in the death of a member of an endangered species. Consult your local county bulletin, County Extension Agent, or Pesticide State Lead Agency for information concerning endangered species in your area. Resistance Management Some insects are known to develop resistance to insecticides after repeated use. As with any insecticide, the use of this product should conform to resistance management strategies established for the use area.

V133 This product contains a Group 4A insecticide. Insect biotypes with acquired or inherent resistance to Group 4A may eventually dominate the insect population if Group 4A insecticides are used repeatedly as the predominant method of control for targeted species. The active ingredient in this product belongs to the neonicotinoid chemical class. Insect pests resistant to other chemical classes have not shown cross-resistance to this product. To maintain susceptibility to this class of chemistry in insect species with high resistance development potential, it is recommended that for each crop season: 1) only a single, soil application of this product be made; 2) foliar applications of products from this same class not be made following a long residual, soil application of. this product, or other, neonicotinoid products. Foliar applications of this product or other Group 4A products from the neonicotinoid chemical class should not be used on crops previously treated with a long-residual, soil-applied product from the neonicotinoid chemical class. Examples of other Group 4A, neonicotinoid products used as" foliar treatments include: Actara, Assail, Calypso, Centric, Clutch, Couraze, Gallant, Impulse, Intruder, Leverage, Passada, Provado, Trimax, Trimax Pro and Venom. Examples of other Group 4A, neonicotinoid products used as soil treatments include: Admire, Admire Pro, Advise, Alias, Couraze, Cruiser, Gaucho, Macho, Macho Max, Platinum, Venom and Widow. Contact your local extension specialist, certified crop advisor and/or product manufacturer for additional insect resistance management recommendations. Also, for more information on Insect Resistance Management (IRM), visit the Insecticide Resistance Action Committee (IRAC) on the web at http://www.irac-online.org/. DIRECTIONS FOR USE It is a violation of Federal law to use this product in any manner inconsistent with its labeling. DO NOT apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation. See individual crops for specific pollinator protection application restrictions. If none exist under the specific crop, for foliar applications, follow these application directions for crops that are contracted to have pollination services or for food/feed crops and commercially grown ornamentals that are attractive to pollinators: FOR CROPS UNDER CONTRACTED POLLINATION SERVICES Do not apply this product while bees are foraging. Do not apply this product until flowering is complete and all petals have fallen unless the following condition has been met: If an application must be made when managed bees are at the treatment site, the beekeeper providing the pollination services must be notified no less than 48-hours prior to the time of the planned application so that the bees can be removed, covered or otherwise protected prior to spraying. FOR FOOD CROPS AND COMMERCIALLY GROWN ORNAMENTALS NOT UNDER CONTRACT FOR POLLINATION SERVICES BUT ARE ATTRACTIVE TO POLLINATORS Do not apply this product while bees are foraging. Do not apply this product until flowering is complete and all petals have fallen unless one of the following conditions is met: • The application is made to the target site after sunset

• The application is made to the target site when temperatures are below 55°F • The application is made in accordance with a government-initiated public health response • The application is made in accordance with an active state-administered apiary registry program where beekeepers are notified no less than 48-hours prior to the time of the planned application so that the bees can be removed, covered or otherwise protected prior to spraying • The application is made due to an imminent threat of significant crop loss, and a documented determination consistent with an IPM plan or predetermined economic threshold is met. Every effort should be made to notify beekeepers no less than 48-hours prior to the time of the planned application so that the bees can be removed, covered or otherwise protected prior to spraying. Note to Reviewer: the two statements in brackets below may be used as they relate to Tilia species: [DO NOT apply this product, by any application method, to linden, basswood or other Tilia species in the State of Oregon,] [DO NOT apply this product, by any application method, to linden, basswood or other Tilia species.] AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests-, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. DO NOT enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours. Exception: If the product is soil-injected or soil-incorporated, the Worker Protection Standard, under certain circumstances, allows workers to enter the treated area if there will be no contact with anything that has been treated. PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is: • Coveralls « Chemical-resistant gloves made of any waterproof material such as, barrier laminate, butyl rubber, nitrile rubber, neoprene rubber, natural rubber, polyethylene, polyvinylchloride (PVC) or viton • Shoes plus socks APPLICATION INSTRUCTIONS Apply as a directed or broadcast foliar spray. Thorough coverage of foliage is necessary without runoff for optimum insecticidal efficacy. Use adequate spray volumes, properly calibrated application equipment and spray adjuvant if necessary to obtain thorough coverage. Failure to provide adequate coverage and retention of this product on leaves and fruit may result in loss of insect control or delay in onset of activity. Apply this product with properly calibrated ground or aerial application equipment. Minimum recommended spray volumes, unless otherwise specified on crop specific application instructions sections, are 1 0 gallons/Acre by ground applications and 5 gallons/Acre through aerial equipment. This product may also be applied by overhead chemigation (see additional CHEMIGATION DIRECTIONS FOR USE section below) if allowed in crop specific application instruction section. Use of this product on crops grown for production of true seed intended for private or commercial planting is not permitted unless allowed under state specific 24 (c) labeling. Additional information on this product uses for these crops and other questions may be obtained from the Cooperative Extension Service, PCAs, or local Nufarm representatives.

rPre-mix with water or other appropriate diluent prior to application. Keep this product and water suspension agitated to avoid settling. DO NOT apply more than 0.5 Ibs active ingredient per acre, per year, regardless of formulation or method of application, unless specified within a crop-specific, Application Instructions section for a given crop. Mixing instructions To prepare the application mixture, add a portion of the required amount of water to the tank and then with agitation add this product. Complete filling tank with balance of water needed. Maintain sufficient agitation during both mixing and application. This product may also be used with other pesticides and/or fertilizer solutions. Please see Compatibility Note below. When tank mixtures of this product and other pesticides are involved, prepare the tank mixture as specified above and follow suggested Mixing Order below. Mixing Order When pesticide mixtures are needed, add wettable powders first, then this product and other flowable (suspension concentrate) products second, and emulsifiable concentrates last. Ensure good agitation as each component is added. DO NOT add an additional component until the previous is thoroughly mixed. If a fertilizer solution is added, a fertilizer/pesticide compatibility agent may be needed. Maintain constant agitation during both mixing and application to ensure uniformity of spray mixture. Compatibility Note Test compatibility of the intended mixture before adding this product to the spray or mix tank. Add proportionate amounts of each ingredient in the appropriate order, to a pint or quart jar, cap, shake for 5 minutes, and let set for 5 minutes. Poor mixing or formation of precipitates that do not readily redisperse indicates an incompatible mixture that should, not be used. For further information, contact your local Nufarm representative. CHEMIGATION - DIRECTIONS FOR USE Refer to DIRECTIONS FOR USE section before proceeding with chemigation application. Types of Irrigation Systems For Foliar Application Chemigation applications of this product may be made to crops through overhead sprinkler chemigation systems if specified in crop-specific instruction sections. DO NOT apply this product through any other type of irrigation system. Water Volume Make chemigation applications of this product as concentrated as possible. Retention of this product on target site of insect infestation is necessary for optimum activity. DO NOT chemigated this product in water volumes exceeding 0.10 inch/Acre. Uniform Water Distribution and System Calibration The irrigation system must provide uniform distribution of treated water. Crop injury, lack of effectiveness, or illegal pesticide residues in the crop can result from non-uniform distribution of treated water. The system must be calibrated to uniformly apply the rates specified. If you have questions about calibration, contact State Extension Service specialists, equipment manufacturers or other experts. Chemigation Monitoring A person knowledgeable of the chemigation system and responsible for its operation, or under the supervision of the responsible person, shall shut the system down and make necessary adjustments should the need arise. Drift DO NOT apply when wind speed favors drift beyond the area intended for treatment. Required System Safety Devices The system must contain a functional check valve, vacuum relief valve, and low-pressure drain appropriately located on the irrigation pipeline to prevent water source contamination from backflow. The pesticide injection pipeline must contain a functional, automatic, quick-closing check valve to prevent the flow of fluid back toward the injection pump. The pesticide injection pipeline must also contain a functional, normally closed, solenoid-operated valve located on the intake side of the injection pump and connected to the system interlock to prevent fluid from being withdrawn from the supply tank when the irrigation system is either automatically or manually shut down. The system must contain functional interlocking controls to automatically shut off the pesticide injection pump when the water pump motor stops. The irrigation line or water pump must include a functional pressure switch which will stop the water pump motor when the water pressure decreases to the point where pesticide distribution is adversely affected. Systems must use a metering pump, such as a positive displacement injection pump (e.g., diaphragm pump) effectively designed and constructed of materials that are compatible with pesticides and capable of being fitted with a system interlock.

Using Water from Public Water Systems Public water system means a system for the provision to the public of piped water for human consumption if such system has at least 15 service connections or regularly serves an average of at least 25 individuals daily at least 60 days out of the year. Chemigation systems connected to public water systems must contain a functional, reduced-pressure zone, back flow preventer (RPZ) or the functional equivalent in the water supply line upstream from the point of pesticide introduction. As an option to the RPZ, the water from the public water system should be discharged into a reservoir tank prior to pesticide introduction. There shall be a complete physical break (air gap) between the outlet end of the fill pipe and to the top or overflow rim of the reservoir tank of at least twice the inside diameter of the fill pipe. The pesticide injection pipeline must contain a functional automatic quick-closing check valve to prevent the flow of fluid back toward the injection. The pesticide injection pipeline must contain a functional normally-closed solenoid-operated valve located on the intake side of the injection pump and connected to the system interlock to prevent fluid from being withdrawn from the supply tank when the irrigation system is either automatically or manually shut down. The system must contain functional interlocking controls to automatically shut off the pesticide injection pump when the water pump motor stops or, in cases where there is no water pump, when the water pressure decreases to the point where pesticide distribution is adversely affected. Systems must use a metering pump such as a positive displacement injection pump (e.g. diaphragm pump) effectively designed and constructed of materials that are compatible with pesticides and capable of being fitted with a system interlock. ROTATIONAL CROPS* Treated areas may be replanted with any crop specified on an imidacloprid label, or any crop for which a tolerance exists for the active ingredient, as soon as practical following the last application. For crops not listed on an imidacloprid label, or for crops for which no tolerances for the active ingredient have been established, a 12-month plant-back interval must be observed. IMMEDIATE PLANT-BACK: All crops on this label plus the following crops not on this label: barley, canola, corn (field, pop & sweet)', rapeseed, sorghum, sugar beet and wheat. . 30-DAY PLANT-BACK: Cereals (including buckwheat, millet, oats, rice, rye, and triticale), soybeans and safflower 10-MONTH PLANT-BACK: Onion and bulb vegetables 12-MONTH PLANT-BACK: All Other Crops

• Cover crops for soil building or erosion control may be planted anytime, but do not graze or harvest for food or feed. FIELD CROPS APPLICATION RATES Apply specified rate per acre as a broadcast or directed foliar spray as pest populations begin to build. Thorough uniform coverage is necessary to achieve optimal control. A spray adjuvant may be used to improve coverage. This product may not knockdown established and heavy insect populations. Two applications may be required to achieve control. Scout fields and retreat if needed. This product may be tank mixed with other insecticides as specified for knockdown of pests or for improved control of other pests. COTTON Pests Controlled Aphids Cotton Fleahoppers Plant bugs (excludes Lygus hesperus) Banded-winged whftefly Green stink bug Southern green stink bug Bollworm/Budworm (ovicidal effect) Pests Suppressed Lygus bugs (Lygus hesperus) Whiteflies (other than bandedwinged whitefly) Rate fluid ounces/Acre

2. 5 to 5.0 3.8 to 5.0 Restrictions: Pre-Harvest Interval (PHI): 14 days Minimum interval between applications: 7 days Maximum amount allowed per year: 25.0 fluid ounces/Acre (0.31 Ib. AI/A) DO

NOT graze treated fields after any application of this product. Applications: This product may be applied through properly calibrated ground, aerial or chemigation application equipment. Tank Mix Specifications Pests Controlled (In addition to pests listed above) For early season control of: Thrips For mid to late season control of: Plant bugs Stink bugs (including Brown stink bug) Grasshoppers Saltmarsh caterpillar Cotton leafperforator This Product Rate fluid ounces/ Acre 2. 5 to 3. 8 2.5 to 3.8 Bidrin® 8* Rate fluid ounces/Acre 1,6 to 3.2 4.0 to 8.0 Restrictions (In addition to Restrictions listed above): *Refer to the Bidrin® 8 product label for specific use instructions; follow all restrictions and precautions that appear on the label. 133 POTATO Pests Controlled Aphids Colorado potato beetle Flea beetles Fleahoppers Psyllids Rate fluid ounces/Acre 3.8 Restrictions: Pre-Harvest Interval (PHI): 7 days Minimum interval between applications: 7 days Maximum amount allowed per year: 16.0 fluid ounces/Acre (0.2 Ib. AI/A) SOYBEANS 1/ Pests Controlled Aphids Bean leaf beetle Cucumber beetles/Rootworm adults Japanese beetle (adults) Leafhoppers Whiteflies Rate fluid ounces/Acre 3.75 Restrictions: Pre-Harvest Interval (PHI): 21 days Minimum interval between applications: 7 days Maximum amount allowed per year: 11. 25 fluid ounces/Acre (0.14 Ib. AI/A) Use not permitted in California unless otherwise directed by state specific 24 (c) labeling. TOBACCO Pests Controlled Aphids Flea beetles Japanese beetle Rate fluid ounces/Acre 2.0 to 4.0 4.0 Restrictions: Pre-Harvest Interval (PHI): 14 days Minimum interval between applications: 7 days

[ Maximum amount allowed per year: 22.4 fluid ounces/Acre (0.28 Ib. AI/A) VEGETABLE and SMALL FRUIT CROPS APPLICATION INSTRUCTIONS Apply specified rate per acre as a broadcast or directed foliar spray as pest populations begin to build. Thorough uniform coverage is necessary to achieve optimal control. A spray adjuvant may be used to improve coverage. This product may not knock down established and heavy insect populations. Two applications may be required to achieve control. Scout fields and retreat if needed. This product may be tank mixed with other insecticides for knockdown of pests or for improved control of other pests. Crops contained with certain Crop Groups recognized by USEPA are subject to change. Please refer to USEPA website (www.epa.gov) for latest Crop Groups. FRUITING VEGETABLES 1/ Crops of Crop Group 8 plus Okra: Eggplant, Ground cherry, Okra, Pepper (including bell, chili, cooking, pimento and sweet). Tomato, Pepinos, Tomatillo Pests Controlled Aphids Colorado potato beetle Leafhoppers Whiteflies Pepper weevil Rate fluid ounces/Acre 3.8 to 6.2 6.2 Restrictions: Pre-Harvest Interval (PHI): 0 days Minimum interval between applications: 5 days Maximum amount allowed per crop season: 19.2 fluid ounces/Acre (0.24 Ib. AI/A) Applications: For pepper weevil, apply specified dosage of this product by ground equipment only, timing applications prior to a damaging pest population becoming established. Good coverage of foliage and fruit is necessary for optimal control. Applications of this product must be incorporated into a full-season program, where alternations of effective products from multiple classes of chemistry and different modes of actions are utilized in a blocked or windowed approach. For additional information, please contact your Nufarm representative, Extension Specialist or crop advisor. Higher rate should be used when targeting adult whiteflies. / Not for use on crops grown for seed unless allowed by state specific 24 (c) labeling. GLOBE ARTICHOKE Pests Controlled Aphids Leafhoppers Rate fluid ounces/Acre 4.0 to 10.0 Restrictions: Pre-Harvest Interval (PHI): 7 days Minimum interval between applications: 14 days Maximum amount allowed per year: 40.0 fluid ounces/Acre (0.50 Ib. AI/A) HERBS Crops of Crop Subgroup 19A: Angelica, Balm (lemon balm), Basil (fresh and dried), Borage, Burnet, Camomile, Catnip, Chervil (dried), Chinese chive, Chive, Clary, Coriander (cilantro or Chinese parsley leaves), Costmary, Culantro (leaf), Curry (loaf), Dillweed, Horehound, Hyssop, Lavender, Lemongrass, Lovage (leaf), Marigold, Marjoram, Nasturtium, Parsley (dried), Pennyroyal, Rosemary, Rue, Sage, Savory (summer and winter), Sweet bay (bay leaf), Tansy, Tarragon, Thyme, Wintergreen, Woodruff, Wormwood. Pests Controlled Aphids Flea Beetles Leafhoppers Whiteflies Rate Fluid ounces / Acre 3.5 Restrictions: 10

Pre-Harvest Interval (PHI): 7 days Minimum interval between applications: 5 days Maximum amount allowed per crop season: 10.5 fluid ounces/Acre (0.13 Ib. AI/Acre) Applications: This product may be applied through properly calibrated ground and aerial application equipment. Thorough coverage with direct contact of the spray material to the target pests is required for optimum control. The addition of an organosilicone-based spray adjuvant at a rate not to exceed the adjuvant manufacturer's recommended use rate may improve coverage and control. Notes: Not all crops and/or varieties listed above have been tested for phytotoxic effects. Without specific knowledge about a particular crop and variety, Nufarm strongly recommends that only small areas or numbers of plants of each be treated and evaluated prior to commercial use. HEAD and STEM BRASSICA VEGETABLES and LEAF BRASSICA GREENS 1/ Crops of Crop Group 5: Broccoli, Broccoli raab (rapini), Brussels sprouts, Cabbage, Cauliflower, Cavalo broccoli. Chinese (gai Ion) broccoli, Chinese (bok choy) cabbage, Chinese (napa) cabbage, Chinese mustard (gai choy) cabbage, • Collards, Kale, Kohlrabi, Mizuna, Mustard greens, Mustard spinach and Rape greens LEAFY. GREEN VEGETABLES 1/ Crops of Crop Subgroup 4A plus Watercress: Amaranth (leafy amaranth, Chinese spinach, tampala), Arugula (roquette), Chervil, Chrysanthemum (edible leaved and garland), Corn salad, Cress (garden), Cress (upland, yellow rocket, winter cress), Dandelion, Dock (sorrel), Endive (escarole), Lettuce (head and leaf), Orach, Parsley, Purslane (garden and winter), Radicchio (red chicory), Spinach (including New Zealand and vine (Malabar spinach, Indian spinach), Watercress (commercial production only; applications must not be made to native cress growing in streams or other bodies of water), Watercress (upland) Pests Controlled Aphids Flea beetles Leafhoppers Whiteflies Rate Fluid ounces/Acre 3.8 Restrictions: Pre-Harvest Interval (PHI): 7 days Minimum interval between applications: 5 days Maximum amount allowed per crop season: 19.2 fluid ounces/Acre (0.23 Ib. AI/A) Applications: For applications made to watercress, production fields must be drained of water at least 24 hours prior to application and water must not be reapplied to the field for a minimum of 24 hours following application. Applications must be made to fully leafed-up canopies only. Not for use on crops grown for seed unless allowed by state specific 24 (c) labeling. LEGUME VEGETABLES 1/ Crops of Crop Group 6 Except soybean, dry: Edible Podded and Succulent Shelled Pea and Bean and Dried Shelled Pea and Bean, Bean (Lupinus spp., includes grain lupin, sweet lupin, white lupin, and white sweet lupin), Bean (Phaseolus spp., includes field bean, kidney bean, lima bean, navy bean, pinto bean, runner bean, snap bean, tepary bean, wax bean), Bean (vigna spp., includes adzuki bean, asparagus bean, blackeyed pea, catjang, Chinese longbean cowpea, Crowder pea, moth bean, mung bean, rice bean, Southern pea, urd bean, yardlong bean), Pea (Pisum spp. includes dwarf pea, edible pea, edible-pod pea, English pea, field pea, garden pea, green pea, snow pea, sugar snap pea), Other Beans and Peas [Broad bean (fava), chickpea (garbanzo bean), Guar, Jackbean, Lablab bean (hyacinth bean, lentil, Pigeon pea, soybean (immature seed), Sword bean] Pests Controlled Aphids Leafhoppers Whiteflies Rate fluid ounces/Acre 3.5 Restrictions: 11

Pre-Harvest Interval (PHI): 7 days Minimum interval between applications: 7 days Maximum amount allowed per crop season: 10.5 fluid ounces/Acre (0.13 Ib. AI/A) Not for use on crops grown for seed unless allowed by state specific 24 (c) labeling. ROOT, TUBEROUS and CORM VEGETABLES 1/ Crops of Crop Group 1 (Except for sugarbeet): Arracacha, Arrowroot, Artichoke (Chinese and Jerusalem), Beet (garden)27, Brudock (edible)27, Canna (edible, Queensland arrowroot), Carrot27, Cassava (bitter & sweet)27, Celeriac27, Chayote (root), Chervil (turnip-rooted)2', Chicory2', Chufa, Dasheen (taro)27, Ginger, Ginseng, Horseradish, Leren, Parsley (turnip-rooted),, Parsnip27, Radish27, Oriental radish (daikon)27, Rutabaga27, Salsify (black)27, Salsify (oyster plant), Salsify (Spanish), Skirret, Sweet potato, Tanier (cocoyam)27, Turmeric, Turnip27, Yam bean (jicama, manoic pea), Yam (true) For applications on potato see Field Crops section for Potato - Foliar Pests Controlled Aphids Flea beetles Leafhoppers Whiteflies Rate fluid ounces/Acre 3.5 Restrictions: Pre-Harvest Interval (PHI): 7 days Minimum interval between applications: 5 days Maximum amount allowed per crop season: 3.5 fluid ounces/Acre (0.044 Ib AI/A) on radish; 10.5 fluid ounces/Acre (0.13 Ib. AI/A) on other crops Maximum applications of this product per crop season: 1 on radish; 3 on other crops. 17 Not for use on crops grown for seed unless allowed by state specific 24 (c) labeling. 2/Tops or greens from these crops may be utilized for food or feed. STRAWBERRY Pests Controlled Aphids Spittlebugs Whiteflies Rate fluid ounces/Acre 3.8 Restrictions: Pre-Harvest Interval (PHI): 7 days Minimum interval between applications: 5 days Maximum amount allowed per crop season: 11. 4 fluid ounces/Acre (0.14 Ib. AI/A) DO NOT apply during bloom or within 1 0 days prior to bloom or when bees-are foraging. TREE, BUSH and VINE CROPS APPLICATION INSTRUCTIONS Apply specified rate per acre as a broadcast or directed foliar spray as pest populations begin to build. Thorough uniform coverage is necessary to achieve optimal control. A spray adjuvant may be used to improve coverage. This product may not knock down established and heavy insect populations. Two applications may be required to achieve control. Scout fields and retreat if needed. This product may be tank mixed with other insecticides for knockdown of pests or for improved control of other pests. Aerial application of this product may result in slower activity and reduced control relative to results from ground application. For trees and vine crops, application rates are based on full size, mature trees or vines. BANANA and PLANTAIN Pests Controlled Aphids Leafhoppers Rate Fluid ounces/Acre 8.0 12

Thrips Restrictions: Pre-Harvest Interval (PHI): 0 day Minimum interval between applications: 14 days Maximum amount allowed per year: 40.0 fluid ounces/Acre (0.5 Ib. AI/A) Applications: Apply specified dosage of this product as a broadcast or directed spray to infested area insuring thorough coverage. This product may be applied through properly calibrated ground or aerial application equipment. Aerial application of this product may result in slower activity and reduced control relative to results from ground application. Addition of an organosilicone adjuvant at a rate not to exceed 2.0 fluid ounces/100 gallons finished spray solution may improve coverage and pest control. BUSHBERRY Crops of Crop Subgroup 13B: Blueberry, Currant, Elderberry, Gooseberry, Huckleberry, Juneberry, Lingonberry, and Salal Pests Controlled Aphids Leafhoppers/Sharpshooters Blueberry maggot Japanese beetles (adults) Thrips (foliage-feeding thrips only) Rate fluid ounces/Acre 3.0 to 4.0 6.0 to 8.0 Restrictions: Pre-Harvest Interval (PHI): 3 days Minimum interval between applications: 7 days Maximum amount allowed per year: 40.0 fluid ounces/Acre (0.5 Ib. AI/A) Maximum number of applications of this product per crop season: 5 Maximum application volume (water): 20.0 GPA - ground; 5.0 GPA - aerial DO NOT apply pre-bloom or during bloom or when bees are foraging. CITRUS Crops of Crop Group 10: Calamondin, Citrus citron, Citrus hybrids (includes chironja, tangelo and tangor), Grapefruit, Kumquat, Lemon, Lime, Mandarin (tangerine), Pummelo, Orange (sweet and sour), Satsuma mandarin, and other cultivars and/or hybrids of these listed. Pests Controlled Aphids Asian citrus psyllid Black fly Leafhoppers/Sharpshooters Leaf miners Mealy bugs Scales Whiteflies Pests Suppressed Thrips (foliage-feeding thrips only) Rate fluid ounces/100 gallons 3.5 to 5.0 (for dilute applications) 3. 5 to 5.0 Rate fluid ounces/ Acre 10.0 to 20.0 (depending on tree size, target pest infestation pressure) and 10.0 to 20.0 Restrictions: Pre-Harvest Interval (PHI): 0 days Minimum interval between applications: 10 days Maximum amount allowed per year: 40.0 fluid ounces/Acre (0.5 Ib. AI/A) DO NOT apply during bloom or within 10 days prior to bloom or when bees are foraging. Applications: Apply specific dosage of this product as a broadcast or directed spray to infested area ensuring thorough coverage. This product may be applied through properly calibrated ground or aerial equipment. Aerial application of this product may result in slower activity and reduced control to results from ground application. Scales - time applications to the crawler stage. Treat each generation. 13

Where concentrated applications are appropriate, increase the spray solution concentration to apply an equivalent rate per acre to that applied in the diluted application. The 20.0 fluid ounce/Acre rate is based on full sized trees. This rate may be reduced proportionally for smaller trees. COFFEE Pests Controlled Aphids Leafhoppers Whiteflies Pests Suppressed Scales Rate fluid ounces/Acre 8.0 8.0 Restrictions: Pre-Harvest Interval (PHI): 7 days Minimum interval between applications: 7 days Maximum amount allowed per crop season: 40.0 fluid ounces/Acre (0.5 Ib. AI/A) DO NOT apply pre-bloom or during bloom or when bees are foraging. Applications: Apply specified dosage of this product as a broadcast or directed spray to infested area insuring thorough coverage. This product may be applied through properly calibrated ground or aerial application equipment. Aerial application of this product may result in slower activity and reduced control relative to results from ground application. GRAPE American bunch grape, Muscadine grape and Viniferous grape Pests Controlled Leafhoppers/Sharpshooters Mealybugs Grapeleaf skeletonizer Rate fluid ounces/Acre 3.0 to 4.0 3. 8 to 4.0 Restrictions: Pre-Harvest Interval (PHI): 0 days Minimum interval between applications: 14 days Maximum amount allowed per year: 8.0 fluid ounces/Acre (0.1 Ib. AI/A) Applications: Apply specific dosage of this product as a broadcast or directed spray to infested area ensuring thorough coverage. This product may be applied through properly calibrated ground or aerial equipment. For application on grapes, use ground application. HOPS Pests Controlled Aphids Restrictions: Pre-Harvest Interval (PHI): 28 days Minimum interval between applications Maximum amount allowed per year: 24 Rate Fluid ounces/Acre 8.0 21 days 0 fluid ounces/Acre (0.3 Ib. AI/A) POME FRUIT Crops of Crop Group 11: Apple, Crabapple, Loquat, Mayhaw, Pear (including Oriental pear), Quince Pests Controlled Leafhoppers Rate fluid ounces/100 gallons 1.0 to 2.0 Rate fluid ounces/Acre 4.0 to 8.0 14

Aphids (except woolly apple aphid) Apple maggot Leafminers San Jose scale FOR PEARS ONLY Mealybugs Pear psylla 2.0 5.0 8.0 20.0 Restrictions: Pre-Harvest Interval (PHI): 7 days Minimum interval between applications: 10 days Maximum of this product allowed per year: 40.0 fluid ounces/Acre (0.50 Ib. AI/A) DO NOT apply pre-bloom or during bloom or when bees are foraging. Applications Applications targeting apple maggot should be combined with manufacturer's recommended rate of a sticker. POMEGRANATE Pests Controlled Aphids Leafhoppers/Sharpshooters Whiteflies Pests Suppressed Scales Rate fluid ounces/Acre 8.0 8.0 Restrictions: Pre-Harvest Interval (PHI): 7 days Minimum interval between applications: 7 days Maximum amount allowed per year: 24.0 fluid ounces/Acre (0.3 Ib. AI/A) DO NOT apply pre-bloom or during bloom or when bees are foraging. STONE FRUIT Crops of Crop Group 12: Apricot, Cherry (including sweet and tart), Nectarine, Peach, Plum (including Chickasaw, Damson and Japanese), Plumcot, Prune (fresh and dried) Pests Controlled Aphids Green June beetle Japanese beetle Leafhoppers/Sharpshooters Plant bugs Rose chafer San Jose scale Cherry fruit fly Rate fluid ounces/100 gallons 2.0 2.0 Rate fluid ounces/Acre 4.0 to 8.0 6.0 to 8.0 Pests Suppressed Plum curculio Stink bugs 2.0 8.0 Restrictions for Apricot, Nectarine, Peach: Pre-Harvest Interval (PHI): 0 days Minimum interval between applications: 7 days Maximum amount allowed per year: 24.0 fluid ounces/Acre (0.30 Ib, AI/A) Minimum application volume (water):. 50 GPA - ground application; 25 GPA - aerial application. DO NOT apply pre-bloom or during bloom or when bees are foraging. Restrictions for Cherries, Plums, Plumcot, Prune: Pre-Harvest Interval (PHI): 7 days Minimum interval between applications: 10 days Maximum amount allowed per year: 40.0 fluid ounces/Acre (0.50 Ib. AI/A) Minimum application volume (water): 50 GPA - ground application; 25 GPA - aerial application. 15

DO NOT apply pre-bloom or during bloom or when bees are foraging. TREE NUTS Crops of Crop Group 14 except Almond: Beechnut, Brazil nut, Butternut, Cashew, Chestnut, Chinquapin, Filbert, Hickory nut, Macadamia nut, Pecan, Pistachio, Walnut (black and English) Pests Controlled Aphids (except Black pecan aphid) Leafhoppers/Sharpshooters Phylloxera spp. (leaf infestations) Spittlebugs Whiteflies Black pecan aphid Mealybugs San Jose scale Rate fluid ounces/ Acre 3.5 to 7.0 8.0 Restrictions: DO NOT use in Almonds. Pre-Harvest Interval (PHI): 7 days Minimum interval between applications: 6 days Maximum amount allowed per year: 28.8 fluid ounces/Acre (0.36 Ib. AI/A) Minimum application volume (water): 50 GPA - ground application, 25 GPA - aerial application DO NOT apply pre-bloom or during bloom or when bees are foraging. Applications: Time applications for the control of San Jose scale according to crawler stage, treating each successive generation. Two applications on a 10 to 14-day interval may be required to achieve control. TROPICAL FRUIT Acerola, Atemoya, Avocado, Birida, Black sapote, Canistel, Cherimoya, Custard apple, Feijoa, Liana, Jaboticaba, Guava, Longan, Lychee, Mamey sapote, Mango, Papaya, Passionfruit, Persimmon, Pulasan, Rambutan, Sapodilla, Soursop, Spanish lime, Star apple, Starfruit, Sugar apple, Waxjambu Pests Controlled Aphids Leafhoppers/Sharpshooters Mealybugs Thrips (foliage-feeding thrips only) Whiteflies Pests Suppressed Scales Rate fluid ounces/Acre 8.0 8.0 Restrictions: Pre-Harvest Interval (PHI): 7 days Minimum interval between applications: 10 days Maximum amount allowed per year: 40.0 fluid ounces/Acre (0.50 Ib. AI/A) DO NOT apply pre-bloom or during bloom or when bees are foraging. 16

OTHER CROPS APPLICATION INSTRUCTIONS Apply specified rate per acre as a broadcast or directed foliar spray as pest populations begin to build. Thorough uniform coverage is necessary to achieve optimal control. A spray adjuvant may be used to improve coverage. This product may not knock down established and heavy insect populations. Two applications may be required to achieve control. Scout fields and retreat if needed. This product may be tank mixed with other insecticides for knock down of pests or for improved control of other pests. CHRISTMAS TREE Pests Controlled Aphids Adelgids Sawflies Rate Fluid ounces /Acre 4.0 to 8.0 Restrictions: Minimum interval between applications: 7 days Maximum amount allowed per year: 40.0 fluid ounces/Acre (0.50 Ib. AI/A) Applications: Apply specific dosage of this product as a broadcast or directed spray to infested area ensuring thorough coverage. This product may be applied through properly calibrated ground or aerial equipment. Aerial application of this product may result in slower activity and reduced control relative to results from ground application. Gall-forming adelgids - time applications to coincide with full bud-swell or first bud-break of earliest bud-breaking trees. Once galls form spraying will be ineffective. POPLAR/COTTONWOOD - FOLIAR 1/ (Includes members of the genus Populus grown for pulp or timber) Pests Controlled Aphids Leaf beetles Rate fluid ounces/Acre 4.0 to 8.0 Restrictions: Minimum interval between applications: 10 days Maximum amount allowed per year: 40.0 fluid ounces/Acre (0.50 Ib. AI/A) DO NOT apply pre-bloom or during bloom or when bees are foraging. Use not permitted in California unless otherwise directed by state specific 24 (c) labeling. STORAGE AND DISPOSAL DO NOT contaminate water, food, or feed by storage or disposal. PESTICIDE STORAGE: Store in a cool, dry place and in such a manner as to prevent cross contamination with other pesticides, fertilizers, food, and feed. Store in original container and out of the reach of children, preferably in a locked storage area. Handle and open container in a manner as to prevent spillage. If the container is leaking, invert to prevent leakage. If container is leaking or material spilled for any reason or cause, carefully dam up spilled material to prevent runoff. Refer to Precautionary Statements on label for hazards associated with the handling of this material. DO NOT walk through spilled material. Absorb spilled material with absorbing type compounds and dispose of as directed for pesticides below. In spill 17

or leak incidents, keep unauthorized people away. PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be disposed of on-site or at an approved waste disposal facility. CONTAINER DISPOSAL [HANDLING]: [Nonrefillable Containers 5 Gallons or Less] Nonrefillable container. DO NOT reuse or refill this container. Offer for recycling if available. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Then offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill, or by other procedures approved by State and local authorities. Plastic containers are also disposable by incineration, or, if allowed by State and local authorities, by burning. If burned stay out of smoke. [Nonrefillable containers larger than 5 gallons] Nonrefillable container. DO NOT reuse or refill this container. Offer for recycling if available. Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container l'/4 full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeat this procedure two more times. Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 psi for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. [Refillable containers larger than 5 gallons] Refillable container. Refill this container with pesticide only. DO NOT reuse this container for any other purpose. Cleaning the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal, empty the remaining contents from this container into application equipment or a mix tank. Fill the container about 10% full with water and, if possible, spray all sides while adding water. If practical, agitate vigorously or recirculate water with the pump for two minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times. [Refillable containers for return to Nufarm] Refillable container. Refill this container with pesticide only. DO NOT reuse this container for any other purpose. Close all openings and replace all caps. Contact Nufarm's Customer Service Department at 1-800-345-3330 to arrange for return of the empty refillable container. WARRANTY DISCLAIMER The directions for use of this product must be followed carefully. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, (1) THE GOODS DELIVERED TO YOU ARE FURNISHED "AS IS" BY MANUFACTURER OR SELLER AND (2) MANUFACTURER AND SELLER MAKE NO WARRANTIES, GUARANTEES, OR REPRESENTATIONS OF ANY KIND TO BUYER OR USER, EITHER EXPRESS OR IMPLIED, OR BY USAGE OF TRADE, STATUTORY OR OTHERWISE, WITH REGARD TO THE PRODUCT SOLD, INCLUDING, BUT NOT LIMITED TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, USE, OR ELIGIBILITY OF THE PRODUCT FOR ANY PARTICULAR TRADE USAGE. UNINTENDED CONSEQUENCES, INCLUDING BUT NOT LIMITED TO INEFFECTIVENESS, MAY RESULT BECAUSE OF SUCH FACTORS AS THE PRESENCE OR ABSENCE OF OTHER MATERIALS USED IN COMBINATION WITH THE .GOODS, OR THE MANNER OF USE OR APPLICATION, INCLUDING WEATHER, ALL OF WHICH ARE BEYOND THE CONTROL OF MANUFACTURER OR SELLER AND ASSUMED BY BUYER OR USER. THIS WRITING CONTAINS ALL OF THE REPRESENTATIONS AND AGREEMENTS BETWEEN BUYER, MANUFACTURER AND SELLER, AND NO PERSON OR AGENT OF MANUFACTURER OR 18

( : CSELLER HAS ANY AUTHORITY TO MAKE ANY REPRESENTATION OR WARRANTY OR AGREEMENT RELATING IN ANY WAY TO THESE GOODS. LIMITATION OF LIABILITY TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, IN NO EVENT SHALL MANUFACTURER OR SELLER BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, OR FOR DAMAGES IN THEIR NATURE OF PENALTIES RELATING TO THE GOODS SOLD, INCLUDING USE, APPLICATION, HANDLING, AND DISPOSAL. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, MANUFACTURER OR SELLER SHALL NOT BE LIABLE TO BUYER OR USER BY WAY OF INDEMNIFICATION TO BUYER OR TO CUSTOMERS OF BUYER, IF ANY, OR FOR ANY DAMAGES OR SUMS OF MONEY, CLAIMS OR DEMANDS WHATSOEVER, RESULTING FROM OR BY REASON OF, OR RISING OUT OF THE MISUSE, OR FAILURE TO FOLLOW LABEL WARNINGS OR INSTRUCTIONS FOR USE, OF THE GOODS SOLD BY MANUFACTURER OR SELLER TO BUYER. ALL SUCH RISKS SHALL BE ASSUMED BY THE BUYER, USER, OR ITS CUSTOMERS. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BUYER'S OR USER'S EXCLUSIVE REMEDY, AND MANUFACTURER'S OR SELLER'S TOTAL LIABILITY SHALL BE FOR DAMAGES NOT EXCEEDING THE COST OF THE PRODUCT. If you do not agree with or do not accept any of directions for use, the warranty disclaimers, or limitations on liability, do not use the product, and return it unopened to the Seller, and the purchase price will be refunded. (RV042314) NUPRID is a registered trademark of Nufarm Americas Inc. All other trademarks are the property of their respective owners. 19