crop-chem-docs/corpus/epa_ppls/241-310.md

PURSUIT HERBICIDE

• EPA Reg No: 241-310
• Registrant: BASF AGRICULTURAL SOLUTIONS US LLC
• Signal word: Caution
• Active ingredients: Imazethapyr, ammonium salt (22.87%)
• Label accepted: 2015-09-29
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000241-00310-20150929.pdf

---

UNITED STATES ENVIRONMENTAL PROTECTION AGENCY WASHINGTON, DC 20460

Fast Track Label Acceptable v.20150320 OFFICE OF CHEMICAL SAFETY AND POLLUTION PREVENTION September 29, 2015

Ms. Tonya Brown Product Registration Specialist Regulatory Affairs BASF Corporation P.O. Box 13528 26 Davis Drive Research Triangle Park, NC 27709

Subject: Label Amendment – Addition of ed amame use-specific information and general label revisions Product Name: Pursuit Herbicide EPA Registration Number: 241-310 Application Date: 07/16/2015 Decision Number: 507324

Dear Ms. Brown:

The amended label referred to above, submitted in connection with registration under the Federal Insecticide, Fungicide and Rodenticide Act, as amended, is acceptable. This approval does not affect any conditions that were previously imposed on this registration. You continue to be subject to existing conditions on your registration and any deadlines connected with them.

A stamped copy of your labeling is enclosed for your records. This labeling supersedes all previously accepted labeling. You must submit one copy of the final printed labeling before you release the product for shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may distribute or sell this product under the previously approved labeling for 18 months from the date of this letter. After 18 months, you may only distribute or sell this product if it bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3.

Should you wish to add/retain a reference to the company’s website on your label, then please be aware that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims made on the website may not substantially differ from those claims approved through the registration process. Therefore, should the Agency find or if it is brought to our attention that a website contains false or misleading statements or claims substantially differing from the EPA approved registration, the website will be referred to the EPA’s Office of Enforcement and Compliance.

Page 2 of 2 EPA Reg. No. 241-310 Decision No. 507324

Your release for shipment of the product constitutes acceptance of these conditions. If these conditions are not complied with, the registration will be subject to cancellation in accordance with FIFRA section 6. If you have any questions, please contact Lisa Pahel by phone at 703-347- 0459, or via email at pahel.lisa@epa.gov.

Sincerely,

Heather A. Garvie, Product Manager 24 Fungicide Herbicide Branch (7505P) Office of Pesticide Programs

Enclosure

For use on alfalfa, beans and peas, birdsfoot trefoil, Clearfield® corn, clover, edamame, peanut, and soybean Active Ingredient: ammonium salt of imazethapyr: (±)-2-[4,5-dihydro-4-methyl-4- (1-methylethyl)-5-oxo-1H-imidazol-2-yl]-5-ethyl-3-pyridinecarboxylic acid* . . . 22.87% Other Ingredients: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77.13% Total: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100.00%

• Equivalent to 21.6% (±)-2-[4,5-dihydro-4-methyl-4-(1-methylethyl)-5-oxo-1H-imidazol-2-yl]-5-ethyl-3- pyridinecarboxylic acid 1 gallon contains 2.0 pounds of active ingredient as the free acid. EPA Reg. No. 241-310 EPA Est. No. KEEP OUT OF REACH OF CHILDREN CAUTION/PRECAUCIÓN See inside for complete First Aid, Precautionary Statements, Directions For Use, Conditions of Sale and Warranty, and state-specific crop and/or use site restrictions. In case of an emergency endangering life or property involving this product, call day or night 1-800-832-HELP (4357). Net Contents: BASF Corporation 26 Davis Drive, Research Triangle Park, NC 27709 Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand this label, find someone to explain it to you in detail.) Group Herbicide2 09/29/2015 241-310

Precautionary Statements Hazards to Humans and Domestic Animals CAUTION. Harmful if inhaled or absorbed through skin. Avoid breathing spray mist. Avoid contact with skin, eyes, or clothing. Personal Protective Equipment (PPE) Applicators and other handlers must wear: • Long-sleeved shirt and long pants • Chemical-resistant gloves, such as barrier laminate, butyl rubber ≥ 14 mils, nitrile rubber ≥ 14 mils, neoprene rubber ≥ 14 mils, natural rubber (includes natural rubber blends and laminates) ≥ 14 mils, polyethylene, polyvinyl chloride (PVC) ≥ 14 mils, or viton ≥ 14 mils • Shoes plus socks Follow manufacturer’s instructions for cleaning and main- taining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry. Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product’s concentrate. DO NOT reuse them. Environmental Hazards DO NOT apply directly to water, or to areas where surface water is present, or to intertidal areas below the mean high water mark. DO NOT contaminate water when disposing of equipment washwater or rinsate. Groundwater Advisory This chemical has properties and characteristics associat- ed with chemicals detected in groundwater. The use of this chemical in areas where soils are permeable, particularly where the water table is shallow, may result in groundwater contamination. This product may not be mixed or loaded within 50 feet of any wells (including abandoned wells and drainage wells), sinkholes, perennial or intermittent streams and rivers, and natural or impounded lakes or reservoirs. This setback does not apply to properly capped or plugged abandoned wells and does not apply to impervious pad or properly diked mixing/loading areas. Operations that involve mixing, loading, rinsing, or washing of this product into or from pesticide handling or applica- tion equipment or containers within 50 feet of any well are prohibited unless conducted on an impervious pad con- structed to withstand the weight of the heaviest load that may be positioned on or moved across the pad. Such a pad shall be designed and maintained to contain any prod- uct spills or equipment leaks, container or equipment rinse or washwater, and rainwater that may fall on the pad. Surface water shall not be allowed to flow over or from the pad, which means the pad must be self- contained. The pad shall be sloped to facilitate material removal. An unroofed pad shall be of sufficient capacity to contain, at a minimum, 110% of the capacity of the largest pesti- cide container or application equipment on the pad. A pad that is covered by a roof of sufficient size to com- pletely exclude precipitation from contact with the pad shall have a minimum containment capacity of 100% of the capacity of the largest pesticide container or application equipment on the pad. Containment capacities as described above shall be main- tained at all times. The above specific minimum containment capacities do not apply to vehicles when delivering pesticide shipments to the mixing/loading site. States may have in effect additional requirements regarding wellhead setbacks and operational containment. DO NOT apply this product through any type of irrigation system. Product must be used in a manner which will prevent back-siphoning in wells, spills, or improper disposal of excess pesticide spray mixture. USER SAFETY RECOMMENDATIONS Users should: • Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet. • Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. 2 FIRST AID If on skin or clothing • Take off contaminated clothing. • Rinse skin immediately with plenty of water for 15 to 20 minutes. • Call a poison control center or doctor for treatment advice. If in eyes • Hold eyes open and rinse slowly and gently with water for 15 to 20 minutes. • Remove contact lenses, if present, after the first 5 minutes; then continue rinsing eyes. • Call a poison control center or doctor for treatment advice. If inhaled • Move person to fresh air. If person is not breathing, call 911 or an ambulance; then give arti- ficial respiration, preferably mouth to mouth if possible. • Call a poison control center or doctor for further treatment advice. HOTLINE NUMBER Have the product container or label with you when calling a poison control center or doctor or going for treatment. You may also contact BASF Corporation for emergency medical treatment information: 1-800-832-HELP (4357).

Directions For Use It is a violation of federal law to use this product in a man- ner inconsistent with its labeling. This label must be in the possession of the user at the time of pesticide application. DO NOT apply this product in a way that will contact work- ers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your state or tribe, consult the agency responsible for pesticide regulation. Observe all cautions and limitations on this label and on the labels of products used in combination with Pursuit ® herbicide. DO NOT use Pursuit other than in accordance with the instructions set forth on this label. The use of Pursuit not consistent with this label may result in injury to crops. Keep containers closed to avoid spills and contamination. In Case of Emergency In case of large-scale spill of this product, call: • CHEMTREC 1-800-424-9300 • BASF Corporation 1-800-832-HELP (4357) In case of medical emergency regarding this product, call: • Your local doctor for immediate treatment • Your local poison control center (hospital) • BASF Corporation 1-800-832-HELP (4357) STORAGE AND DISPOSAL DO NOT contaminate water, food, or feed by storage or disposal. Pesticide Storage Keep from freezing. DO NOT store below 32° F. Pesticide Disposal Wastes resulting from the use of this product may be dis- posed of on-site or at an approved waste disposal facility. Container Handling Nonrefillable Container. DO NOT reuse or refill this container. Triple rinse or pressure rinse container (or equivalent) promptly after emptying; then offer for recy- cling, if available, or reconditioning, if appropriate, or puncture and dispose of in a sanitary landfill, or by inciner- ation, or by other procedures approved by state and local authorities. Triple rinse containers small enough to shake (capacity ≤ 5 gallons) as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 sec- onds. Pour rinsate into application equipment or a mix tank, or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this pro- cedure two more times. Triple rinse containers too large to shake (capacity > 5 gallons) as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container 1/4 full with water. Replace and tighten clo- sures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into application equipment or a mix tank, or store rinsate for later use or disposal. Repeat this procedure two more times. Pressure rinse as follows: Empty the remaining con- tents into application equipment or mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank, or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. This standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notifi- cation, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equip- ment (PPE) and restricted-entry interval. The requirements in this box only apply to uses of this product that are cov- ered by the Worker Protection Standard. DO NOT enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 4 hours. EXCEPTION: if the product is soil-injected or soil- incorporated, the Worker Protection Standard, under certain circumstances, allows workers to enter the treated area if there will be no contact with anything that has been treated. PPE required for early entry to treated areas that is per- mitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is: • Coveralls • Chemical-resistant gloves, such as butyl rubber ≥ 14 mils, or natural rubber ≥ 14 mils, or neoprene rub- ber ≥ 14 mils, or nitrile rubber ≥ 14 mils • Shoes plus socks 3

Steps to take if material is released or spilled: • Dike and contain the spill with inert material (sand, earth, etc.) and transfer liquid and solid diking material to sepa- rate containers for disposal. • Remove contaminated clothing and wash affected skin areas with soap and water. • Wash clothing before reuse. • Keep the spill out of all sewers and open bodies of water. Product Information Pursuit® herbicide is a soluble liquid herbicide to control and suppress many broadleaf and grass weeds and sedges, as listed in this label. Pursuit kills weeds by root and/or foliage uptake and rapid translocation to growing points. Adequate soil moisture is important for optimum Pursuit activity. When adequate soil moisture is present, Pursuit provides residual control of susceptible germinating weeds; activity on established weeds depends on weed species and location of its root system in the soil. Occasionally, internode shortening and/or temporary yel- lowing of crop plants may occur after Pursuit application. These effects occur infrequently and are temporary. Normal growth and appearance should resume within 1 to 2 weeks. When organophosphate (such as Lorsban ® insecticide) or carbamate insecticides are tank mixed with Pursuit, temporary injury may result to the treated crops. Use of Pursuit is expected to result in normal growth of rotational crops in most situations; however, various envi- ronmental and agronomic factors make it impossible to eliminate all risks associated with use of this product and, therefore, rotational crop injury is always possible. Under some conditions (such as heavy texture soil, high organic matter, low pH, or low rainfall), Pursuit may cause injury to subsequent planted crops. Vegetable crops and particular- ly sugar beets are sensitive to Pursuit residue in the soil. Replanting If replanting is necessary in a field previously treated with Pursuit, the field may be replanted to any labeled crop for this product. Rework the soil no deeper than the treated zone. DO NOT apply a second treatment of Pursuit. Resistance Management Naturally occurring biotypes* of some weeds listed on this label may not be effectively controlled by this and/or other products with the ALS/AHAS enzyme-inhibiting mode of action. Other herbicides with the ALS/AHAS enzyme- inhibiting mode of action include sulfonylureas (e.g. Accent ® herbicide), imidazolinones (e.g. Beyond® herbicide, Raptor® herbicide), triazolopyrimidine sulfoanilides (e.g. FirstRate® herbicide), sulfonylaminocarbonyl triazolinones, and pyrimidyl benzoates. If naturally occurring ALS/AHAS-resistant biotypes are present in a field, Pursuit and/or any other ALS/AHAS enzyme-inhibiting mode-of-action herbicide should be tank mixed or applied sequentially with an appropriate registered herbicide having a different mode of action to ensure control.

• A weed biotype is a naturally occurring plant within a given species that has a slightly different, but distinct, genetic makeup from other plants. Use Area Restriction In New York State - Not for Sale or Use on Long Island. Mixing Instructions Postemergence applications of Pursuit require the addi- tion of an adjuvant AND a nitrogen fertilizer solution. NOTE: Fertilizer solutions may not be used in California. Adjuvants When an adjuvant (or specific adjuvant product, such as a drift control agent) is to be used with this product, the use of a Chemical Producers and Distributors Association (CPDA) certified adjuvant is recommended. Crop Oil Concentrate (COC). Petroleum-based or vegetable seed-based oil concentrate may be used. Methylated seed oil (MSO) is recommended when weeds are under moisture or temperature stress. Use methylated seed oil at 1.0% volume/volume (v/v) (1 gallon per 100 gallons of spray solution), or use crop oil concentrate at 1.25% v/v (1.25 gallons per 100 gallons of spray solution). DO NOT include COC when applying Pursuit to edible legume vegetable crops. OR Surfactant. Use nonionic surfactant (NIS) containing at least 80% active ingredient. Apply surfactant at 0.25% v/v (1 quart per 100 gallons of spray solution). An organosili- cone surfactant or dry surfactant may be used in place of NIS. AND (all states except California) Fertilizer Solution. Recommended nitrogen-based fertilizers including liquid fertilizers (such as 28%N, 32%N, or 10-34-0) may be applied at 1.25 to 2.5 gallons per 100 gallons of spray solution. Use the higher rate when weeds are under moisture or temperature stress. Instead of liquid fertilizer, spray grade ammonium sulfate (AMS) may be used at 12 to 15 lbs per 100 gallons of spray solution. NOTE: Fertilizer solution is not required in Pursuit applica- tions in use areas south of Interstate Highway 40, except in the states of New Mexico, Oklahoma, and Texas. 4

Tank Mix Instructions When applying Pursuit® herbicide as the only herbicide:

1. Fill spray tank 1/2 full with clean water.
2. Use a calibrated device to measure the required amount of Pursuit. While agitating, add Pursuit to the spray tank.
3. Add adjuvants.
4. Fill remainder of spray tank with water. If other herbicides or other spray tank components are tank mixed with Pursuit, while agitating, add components in the following order and thoroughly mix after adding each component.
5. Fill spray tank 1/2 full with clean water.
6. Add soluble packet products and thoroughly mix.
7. Add WP (wettable powder), DG (dispersible granule), DF (dry flowable), or liquid flowable formulations not in soluble packets.
8. Add Pursuit and thoroughly mix.
9. Add other aqueous solution products.
10. Add EC (emulsifiable concentrate) products.
11. Add surfactant or crop oil to the spray tank.
12. Add liquid fertilizer.
13. While agitating, fill the remainder of the tank with water. When Pursuit is used in combination with another herbi- cide, refer to the respective label for rates, methods of application, proper timing, weeds controlled, restrictions, and precautions. Always use in accordance with the most restrictive label restrictions and precautions. DO NOT exceed label rates. Pursuit cannot be mixed with any product containing a label prohibiting such mixtures. Cleaning Spray Equipment To avoid injury to sensitive crops, spray equipment used for Pursuit applications must be drained and thoroughly cleaned with water before being used to apply other products. Spraying Instructions DO NOT apply when wind velocity is greater than 10 mph, or when spray may be carried to sensitive crops. Pursuit should only be applied when the potential for drift to adja- cent sensitive areas (e.g. residential areas, bodies of water, known habitat for threatened or endangered species, or nontarget crops) is minimal (e.g. when wind is blowing away from the sensitive areas). Ground Application Uniformly apply with properly calibrated ground equipment in 10 or more gallons of water per acre. A spray pressure of 20 to 40 PSI is recommended. To ensure thorough coverage, use a minimum of 20 gallons of water per acre when applying Pursuit to minimum tillage or no-till crops. Use higher gallonage for fields with dense vegetation or heavy crop residue. Adjust the boom height to ensure proper coverage of weed foliage (according to manufacturer’s recommendation). Use only flat-fan nozzle tips for post emergence applications. Avoid overlaps when spraying. Aerial Application Pursuit may be applied by air to crops listed in this label unless otherwise noted. Uniformly apply with properly calibrated aerial equipment in 5 or more gallons of water per acre. When applied postemergence, the addition of NIS AND fertilizer solution are required for optimum weed control. Apply NIS at 1 quart per 100 gallons of spray solution OR COC at 1.25 gallons per 100 gallons of spray solution AND a liquid fertilizer at 1.25 gallons per 100 gallons of spray solution. See Postemergence in Application Information section. Avoiding spray drift at the application site is the responsibil- ity of the applicator. The interaction of many equipment-related and weather-related factors determines the potential for spray drift. The applicator and the grower are responsible for considering all these factors when mak- ing decisions. The following drift management requirements must be fol- lowed to avoid off-target drift movement from aerial applications to agricultural field crops.
14. The distance of the outermost nozzles on the boom must not exceed 3/4 the length of the wingspan or rotor.
15. Nozzles must always point backward parallel with the airstream and never be pointed downward more than 45 degrees. Where states have more stringent regulations, they must be observed. The applicator must be familiar with and take into account the information covered in the following aerial drift reduc- tion advisory information. Information on Droplet Size The most effective way to reduce drift potential is to apply large droplets. The best drift management strategy is to apply the largest droplets that provide sufficient coverage and control. Applying larger droplets reduces drift potential but will not prevent drift if applications are made improperly or under unfavorable environmental conditions (see Wind; Temperature and Humidity; and Temperature Inversions). Controlling droplet size: • Volume - Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with higher rated flows produce larger droplets. • Pressure - DO NOT exceed the nozzle manufacturer’s recommended pressures. For many nozzle types, lower pressure produces larger droplets. When higher flow rates are needed, use higher flow rate nozzles instead of increasing pressure. • Number of Nozzles - Use the minimum number of noz- zles that provide uniform coverage. 5

• Nozzle Orientation - Orienting nozzles so the spray is released parallel to the airstream produces larger droplets than other orientations and is recommended practice. Significant deflection from the horizontal will reduce droplet size and increase drift potential. • Nozzle Type - Use a nozzle type designed for the intended application. With most nozzle types, narrower spray angles produce larger droplets. Consider using low-drift nozzles. Solid-stream nozzles oriented straight back produce the largest droplets and lowest drift. Boom Length For some use patterns, reducing the effective boom length to less than 3/4 of the wingspan or rotor length may further reduce drift without reducing swath width. Application Height Application must not be made at a height greater than 10 feet above the top of the largest plants unless a greater height is required for aircraft safety. Making applications at the lowest height that is safe reduces exposure of droplets to evaporation and wind. Swath Adjustment When applications are made with a crosswind, the swath will be displaced downwind. Therefore, on the upwind and downwind edges of the field, the applicator must compen- sate for this displacement by adjusting the path of the aircraft upwind. Swath adjustment distance should increase with increasing drift potential (higher wind, smaller droplets, etc.). Wind Drift potential is lowest between wind speeds of 2 to 10 mph. However, many factors, including droplet size and equipment type, determine drift potential at any given speed. Application should be avoided below 2 mph because of variable wind direction and high inversion potential. NOTE: Local terrain can influence wind patterns. Every applicator should be familiar with local wind patterns and how they affect spray drift. Temperature and Humidity When making applications in low relative humidity, set up equipment to produce larger droplets to compensate for evaporation. Droplet evaporation is most severe when con- ditions are both hot and dry. Temperature Inversions Applications should not occur during a temperature inver- sion because drift potential is high. Temperature inversions restrict vertical air mixing, which causes small suspended droplets to remain in a concentrated cloud. This cloud can move in unpredictable directions because of the light, vari- able winds common during inversions. Temperature inversions are characterized by increasing temperatures with altitude and are common on nights with limited cloud cover and light-to-no wind. They begin to form as the sun sets and often continue into the morning. Their presence can be indicated by ground fog; however, if fog is not present, inversions can also be identified by the movement of smoke from a ground source or an aircraft smoke gener- ator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing. Sensitive Areas Pursuit® herbicide should only be applied when the potential for drift to adjacent sensitive areas (e.g. residential areas, bodies of water, known habitat for threatened or endangered species, or nontarget crops) is minimal (e.g. when wind is blowing away from the sensitive areas). Applicator is responsible for any loss or damage which results from spraying Pursuit in a manner other than rec- ommended in this label. In addition, applicator must follow all applicable state and local regulations and ordinances in regard to spraying. Application Information Pursuit may be applied as a preplant, preplant incorporat- ed, preemergence, or postemergence spray. Refer to Use-specific Information for application recommenda- tions and restrictions. Preplant Incorporated Apply Pursuit following land preparation and thoroughly incorporate to a depth of 1 to 2 inches. If crops are plant- ed on beds, apply and incorporate after bed formation using PTO-driven equipment or a rolling cultivator. Maintain Pursuit in the surface 1 to 2 inches of the finished beds. Application may be made up to 45 days before planting soybeans. When Pursuit is soil applied to control nutsedge in peanuts, incorporate with two passes of the incorporation implement. Make the second pass at an offset angle to the first pass to minimize potential for streaking. Preemergence (Surface) Use Pursuit in all production tillage systems. It can be applied before planting (up to 45 days before planting); at planting in conventional, minimum tillage, or no-till produc- tion systems; or after planting and before crop emergence. No-till or Minimum Tillage Apply Pursuit treatments before, during, or after planting. To ensure thorough coverage, use a minimum of 20 gallons of water per acre. Use higher gallonage for fields with dense vegetation or heavy crop residue. For maximum grass control, tank mix Pursuit with Outlook ® herbicide, Prowl® H2O herbicide, or Zidua® herbicide. To kill existing vegetation, glyphosate or 2,4-D (early preplant; see 2,4-D label for limitations) may be tank mixed with Pursuit alone or in combination with Outlook, Prowl H 2O, or Zidua. Remove glyphosate or 2,4-D from the tank mixture if vegetation is absent at the time of application. 6

NOTE: Adjust planters to ensure adequate soil coverage of seed. Soil Application Pursuit® herbicide provides effective weed control in con- servation tillage systems designed to meet conservation compliance requirements. Pursuit can be applied as an early preplant, preplant incorporated, or preemergence treatment in soybeans. It can also be applied in conven- tional, minimum tillage, and no-till production systems. The application method of choice depends on the anticipated weed spectrum and preference of the applicator. Adequate soil moisture is required for optimum activity. Rainfall or overhead irrigation is necessary to move Pursuit into the weed germination zone. The amount of rainfall or irrigation required following application depends on existing soil moisture, soil texture, and organic matter content. Sufficient water to moisten soil to a depth of 2 inches is normally adequate. If adequate moisture is not received within 7 days after treatment, cultivation is recommended to control escaped weeds. When adequate moisture is received after dry conditions, Pursuit provides residual control of susceptible germinating weeds; activity on estab- lished weeds depends on weed species and location of its root system in the soil. Pursuit controls weeds by uptake by weed roots and translocation to the growing points where it stops weed growth. Susceptible weeds may emerge; growth will stop; and weeds will die or are not competitive with the crop. Soil Application with Liquid Fertilizer Pursuit can be applied to the soil in liquid fertilizers, alone, or in combination with Outlook® herbicide or Prowl® H2O herbicide to Clearfield® corn or soybean. Mixtures includ- ing trifluralin may be applied to soybean only. Follow all Pursuit label recommendations about incorporation, tim- ing of application, special instructions, and precautions. Apply treatments in 20 or more gallons of liquid fertilizer per acre with ground equipment. Always test the compatibility of Pursuit with the liquid fertilizer before mixing in the spray tank. Postemergence Pursuit is effective in controlling weeds in conservation tillage as well as in conventional production systems. Apply Pursuit as an early post emergence treatment when crops and weeds are actively growing and before weeds are more than 3-inches tall, unless otherwise indicated. Delay application until the majority of weeds are at the specified growth stage. Base application timing on weed size and not crop growth stage. An adjuvant (crop oil concentrate or surfactant) and nitrogen-based fertilizer must be added to the spray solu- tion for optimum weed control activity. See Adjuvants section in Mixing Instructions for specific instructions. When Pursuit is applied post emergence, absorption will occur through both roots and foliage. Susceptible weeds stop growing and die or are not competitive with the crop. Pursuit not only controls many existing broadleaf and grass weeds when applied post emergence, it also controls susceptible weeds that may emerge after application. Unusually cool temperatures (50° F or less) reduce photo- synthesis and transpiration and thus reduce uptake, translocation, and efficacy of Pursuit in weeds. Delaying a Pursuit application for 48 hours from the time temperature increases above 50° F, if air temperature has been below 50° F for 10 or more hours, will improve weed control and reduce crop response. For maximum weed control, cultivate 7 to 10 days after a post emergence Pursuit application. This timely cultivation will enhance residual weed control, especially under dry conditions. Apply Pursuit a minimum of 1 hour before rainfall or over- head irrigation. No-till or Minimum Tillage and Double Crop Soybeans Pursuit controls existing weeds and provides residual con- trol of most weeds when applied early post emergence in no-till or minimum tillage Clearfield corn or soybean and double crop soybean production systems. Apply before or after emergence of the crop. Refer to postemergence appli- cation information in Weeds Controlled (Clearfield ® Corn) and Weeds Controlled (Soybean) tables for weeds controlled and specified weed size. If Pursuit is applied before emergence of the crop, and weeds exceed the specified size, add a contact herbicide to Pursuit to enhance control. See instructions for No-till or Minimum Tillage in the Preemergence (Surface) section of this label. Use-specific Information Alfalfa and Clover Application Instructions Apply Pursuit postemergence only at 3 to 6 fl ozs/A to seedling or established alfalfa or clover grown for forage, hay, or seed. • Seedling Alfalfa or Clover. Pursuit must be applied postemergence to seedling alfalfa or clover. Apply Pursuit when seedling alfalfa or clover is in the second trifoliate stage or larger and when the majority of weeds are 1 to 3 inches. When applied to alfalfa or clover grown for seed, apply Pursuit before bud formation. For low- growing weeds (such as mustard), apply Pursuit before the rosette exceeds 3 inches. When Pursuit is applied to seedling alfalfa or clover, there may be a temporary reduction in growth. • Established Alfalfa or Clover. Pursuit can be applied to established alfalfa or clover in the fall, in the spring to dormant or semi-dormant alfalfa or clover (less than 3 inches of regrowth), or between cuttings. Make any application before significant alfalfa or clover growth or 7

regrowth (3 inches) to allow Pursuit® herbicide to reach target weeds. Pursuit is effective in controlling a broad spectrum of broadleaf and grass weeds. Alfalfa and clover are tolerant to post emergence applications of Pursuit after the second trifoliate leaf has expanded. Minor height reduction or slight leaf yellowing may occur soon after application. Apply Pursuit as an early post emergence treatment when weeds are actively growing. Weeds are generally easier to control before they exceed 3 inches in height. Weeds under stress are less susceptible to control in cold or drought stress conditions. If applied to alfalfa or clover under cool conditions (40° F or less), temporary stunting and yellowing of the crop may occur. Stand Establishment Apply Pursuit after the alfalfa or clover has 2 fully expand- ed trifoliate leaves. Weeds must not exceed the size listed in the Weeds Controlled (Alfalfa and Clover) tables. Pursuit may be applied to summer-seeded, fall-seeded, or spring-seeded alfalfa or clover. Inter-seeded Oats Oats inter-seeded with alfalfa or clover will reduce soil ero- sion and allow alfalfa or clover to establish. Oats, however, can compete with alfalfa or clover. An application of Pursuit will kill or significantly reduce the growth of oats and allow alfalfa or clover to establish with minimal erosion or competition from oats. Apply Pursuit to oats when oats have 3 to 4 leaves. Dormant Established Alfalfa or Clover Pursuit may be applied to dormant alfalfa or clover in the fall following the last cutting. Pursuit may also be applied in the spring to dormant alfalfa or clover or as alfalfa or clover breaks dormancy. Apply spring treatments before excessive alfalfa or clover growth (less than 3 inches) to reduce spray interference. Growing Established Alfalfa or Clover For weed control during the season, apply Pursuit follow- ing alfalfa or clover cutting. Remove hay from the field and apply Pursuit before excessive alfalfa or clover regrowth. Perennial Grass Suppression If perennial grass (such as orchardgrass, fescue, brome, or timothy) is present in an alfalfa or clover stand, Pursuit will reduce the growth and competitive effect of the grass. Crop-specific Restrictions • A maximum of 6 fl ozs/A of Pursuit (0.094 lb ae/A of imazethapyr) may be applied per year to alfalfa or clover. • DO NOT apply Pursuit at more than 4 fl ozs/A in North Dakota or Minnesota north of Highway #210. • DO NOT apply more than 4 fl ozs/A of Pursuit to alfalfa or clover during the last year of the stand. • DO NOT feed, graze, or harvest alfalfa or clover for 30 days following an application of Pursuit to alfalfa or clover. • Replanting - If replanting is necessary in a field previous- ly treated with Pursuit, DO NOT plant alfalfa or clover for 4 months after Pursuit application. Refer to Rotational Crop Restrictions section for plant-back interval of vari- ous crops. Weeds Controlled When applied as directed, Pursuit will control or reduce competition from the following weeds. Refer to Mixing Instructions section for additive recommendations when weeds are at the maximum specified growth stage or are under stress. NOTE: R = Reduced Competition*

• Suppressed by Pursuit. For best results, apply before weeds exceed size indicated in the following table. Weeds Controlled (Alfalfa and Clover) Pursuit® herbicide Rate (fl ozs/A) 346 Maximum Weed Size (inches) Broadleaf Weeds Artichoke, Jerusalem R 6 8 Bedstraw, catchweed – 3 4 Beet, wild 4 5 6 Buckwheat, wild – 3 4 Chickweed, common R 3 4 mouseear R 3 3 Cocklebur, common R 8 8 Cress, hoary – R R Dandelion – R R(5) Dock, broadleaf (seedling) – – R(6) curly (seedling) – – R(6) Dodder – – R* Fiddleneck – – R(4) Filaree, redstem – R 3 whitestem – R 3 Fleabane, rough – 3 3 Flixweed R 3 4 Goosefoot, nettleleaf R 3 4 Grounsel, common – – R(3) Henbit – R 3 Jimsonweed – 3 4 Knotweed, prostrate – R 3 Kochia (non-ALS resistant) R 3 3 Lambsquarters, common (1 to 2 leaves) – R R(2) (continued) 8

Weeds Controlled (Alfalfa and Clover) (continued) Pursuit® herbicide Rate (fl ozs/A) 346 Maximum Weed Size (inches) Broadleaf Weeds (continued) Lettuce, miner’s – 3 4 Mallow, common – 3 3 little – 3 3 Marshelder – 4 6 Morningglory, entireleaf – R 3 ivyleaf – R 3 pitted – R 3 smallflower R 3 4 tall – R 3 Mustard, black 3 3 4 tumble 3 3 4 wild 3 3 4 Nettle, burning – 3 4 Nightshade, black 3 3 4 Eastern black 3 3 4 hairy 3 3 4 Oxtongue, bristly – – R(3) Pennycress, field 3 3 4 Pepperweed, field 3 3 4 Virginia R 3 3 Pigweed, redroot 4 6 8 smooth 4 6 8 spiny – 6 8 Radish, wild – R 4 Ragweed, common – 2 3 giant – 3 3 Redmaids – 3 4 Rocket, London 3 4 6 yellow R 3 4 Rockpurslane, desert – – 3 Shepherd’s-purse 3 3 4 (continued) Weeds Controlled (Alfalfa and Clover) (continued) Pursuit® herbicide Rate (fl ozs/A) 346 Maximum Weed Size (inches) Broadleaf Weeds (continued) Smartweed, ladysthumb R 3 4 Pennsylvania R 3 4 swamp (seedling) – 3 4 Spurge, petty – 3 4 prostrate – R 3 spotted – R 3 Spurry, corn – 3 3 Sunflower, common R 4 6 Swinecress – 3 3 Tansymustard, green 3 3 4 pinnate 3 3 4 Thistle, Russian R 3 3 Velvetleaf R 3 4 Wartcress, creeping – 2 3 Watercress – 3 3 Willowweed, panicle – 3 3

• For best results in suppressing dodder (Cuscuta spp.), apply Pursuit with COC or MSO after dodder has emerged but before or soon after attachment. Weeds Controlled (Alfalfa and Clover) (continued) Pursuit® herbicide Rate (fl ozs/A) 46 Maximum Weed Size (inches) Grass Weeds1 and Sedges Barnyardgrass R 3 Bluegrass, annual – R(3) Canarygrass, littleseed R R(3) Cereals, volunteer barley R R(4) oat R R(4) wheat R R(4) Crabgrass, large R 3 smooth R 3 Cupgrass, woolly2 33 (continued) 9

Weeds Controlled (Alfalfa and Clover) (continued) Pursuit® herbicide Rate (fl ozs/A) 46 Maximum Weed Size (inches) Grass Weeds1 and Sedges (continued) Foxtail, giant 6 6 green 3 4 yellow 3 3 Johnsongrass, rhizome R R(6 to 12) seedling 8 8 Millet, wild proso R 3 Nutsedge, purple R R(6) yellow R R(6) Oat, wild R R(4) Quackgrass3 – R(7) Rice, red 3 4 Shattercane 8 10 Signalgrass, broadleaf R 8 1 Pursuit is active against many grass species. However, when heavy grass pressure is anticipated, use Pursuit in a sequential application with a registered post emergence grass herbicide such as Poast® herbicide for optimum control. 2 Pursuit controls emerged woolly cupgrass only. 3 Quackgrass will be suppressed only when actively growing and before it exceeds 7 inches in height. Tank Mix Herbicides To control weeds not listed on the Pursuit label, Pursuit may be tank mixed with other approved herbicides. When Pursuit is used in combination with another herbicide, refer to the respective label for rates, methods of applica- tion, proper timing, weeds controlled, restrictions, and precautions. Always use in accordance with the most restrictive label restrictions and precautions. DO NOT exceed label rates. Birdsfoot Trefoil Application Instructions Apply Pursuit postemergence only at 4 fl ozs/A to seedling or established birdsfoot trefoil grown for forage or hay. Apply Pursuit to birdsfoot trefoil with nonionic surfactant (NIS) and urea ammonium nitrate (UAN) or ammonium sulfate (AMS) only. DO NOT use crop oil concentrate (COC) or methylated seed oil (MSO) in place of NIS when applying Pursuit to birdsfoot trefoil. • Seedling Birdsfoot Trefoil. Pursuit must be applied postemergence to seedling birdsfoot trefoil. Apply Pursuit when seedling birdsfoot trefoil is in the third trifoliate stage or larger and when the majority of weeds are 1 to 3 inches. For low-growing weeds (such as mustard), apply Pursuit before the rosette exceeds 3 inches. When Pursuit is applied to seedling birdsfoot trefoil, there may be a temporary reduction in growth. • Established Birdsfoot Trefoil. Pursuit can be applied to established birdsfoot trefoil in the fall, in the spring to dormant or semi-dormant birdsfoot trefoil (less than 3 inches of regrowth), or between cuttings. Make any application before significant birdsfoot trefoil growth or regrowth (3 inches) to allow Pursuit to reach target weeds. Pursuit is effective in controlling a broad spectrum of broadleaf and grass weeds. Birdsfoot trefoil is tolerant to postemergence applications of Pursuit after the third trifoliate leaf has expanded. Height reduction or leaf yellow- ing may occur soon after application. Apply Pursuit as an early postemergence treatment when weeds are actively growing. Weeds are generally easier to control before they exceed 3 inches in height. Weeds under stress are less susceptible to control in cold or drought stress conditions. If applied to birdsfoot trefoil under cool conditions (40° F or less), temporary stunting and yellowing of the crop may occur. Dormant Established Birdsfoot Trefoil Pursuit may be applied to dormant birdsfoot trefoil in the fall following the last cutting. Pursuit may also be applied in the spring to dormant birdsfoot trefoil or as birdsfoot trefoil breaks dormancy. Apply spring treatments before excessive birdsfoot trefoil growth (less than 3 inches) to reduce spray interference. Growing Established Birdsfoot Trefoil For weed control during the season, apply Pursuit follow- ing birdsfoot trefoil cutting. Remove hay from the field and apply Pursuit before excessive birdsfoot trefoil regrowth. Perennial Grass Suppression If perennial grass (such as orchardgrass, fescue, brome or timothy) is present in a birdsfoot trefoil stand, Pursuit will reduce the growth and competitive effect of the grass. Crop-specific Restrictions • A maximum of 4 fl ozs/A of Pursuit (0.063 lb ae/A of imazethapyr) may be applied per year to birdsfoot trefoil. • DO NOT feed, graze, or harvest birdsfoot trefoil for 30 days following an application of Pursuit to birdsfoot trefoil. • Replanting - If replanting is necessary in a field previous- ly treated with Pursuit, DO NOT plant birdsfoot trefoil for 4 months following a Pursuit application. Refer to the Rotational Crop Restrictions section on this label for plant-back interval of various crops. • Not for use in California. 10

Weeds Controlled Refer to list of weeds controlled at the 4 fl ozs/A rate in Alfalfa and Clover in Use-specific Information section on this label. Clearfield® Corn Application Instructions Apply Pursuit® herbicide only on selected field corn hybrids (Clearfield corn) warranted by the seed company to possess resistance and/or tolerance to direct application of Pursuit. DO NOT apply Pursuit to corn hybrids that lack resistance and/or tolerance to Pursuit. Contact your seed supplier, chemical dealer, or BASF to obtain informa- tion regarding Clearfield corn hybrids. BASF has not tested all hybrids in which the imidazolinone tolerance trait is claimed and cannot be responsible for factors which are beyond its control, such as growing con- ditions, environmental conditions, grower practices and the specific genetics of each hybrid tolerant to Pursuit and insecticide applications. Crops growing under stressful environmental conditions can exhibit various injury symptoms which may be more pronounced if herbicides are used. Corn plants treated with Pursuit may exhibit yellowing on new growth. Such effects occur infrequently and are temporary. Normal growth and appearance should resume within 1 to 2 weeks. Apply Pursuit at 4 fl ozs/A for all methods of application: early preplant, preplant incorporated, preemergence, and postemergence (including minimum and no-till). Preplant incorporated treatments of Pursuit are more consistent for grass control. At this rate, 1 gallon of Pursuit will treat 32 acres of Clearfield corn. See additional state-specific instructions for North Dakota and Minnesota (north of Highway #210) section. Crop-specific Restrictions • A maximum of 4 fl ozs/A of Pursuit (0.063 lb ae/A of imazethapyr) may be applied per year to Clearfield corn. • DO NOT make more than one application of Pursuit per year. • DO NOT harvest corn (silage, fodder, or grain) for at least 45 days after Pursuit application. DO NOT graze or feed treated corn forage, silage, fodder, or grain for at least 45 days after an application of Pursuit. • Replanting - In the event of a crop loss because of weather, Clearfield corn can be replanted. DO NOT work the soil deeper than 2 inches. • Not for use in California. Weeds Controlled When applied as directed, Pursuit will control or reduce competition from the following weeds. Refer to the Mixing Instructions section for recommendations of additives when weeds are at the maximum specified growth stage or are under stress. NOTE: C = Control R = Reduced Competition Maximum Leaf Stage column indicates the maximum number of leaves to spray weeds postemergence. DO NOT count cotyledon leaves when determining weed stage of growth. Weeds Controlled (Clearfield® Corn) Soil Applied Postemergence Maximum Size Leaf Stage (inches) Broadleaf Weeds Alligator weed – 4 1 to 3 Anoda, spurred C 2 1 to 2 Artichoke, Jerusalem – 8 6 to 10 Bristly starbur – 2 1 to 2 Buffalobur C* R 1 to 3 Carpetweed C – – Cocklebur, common R 8 1 to 8 Galinsoga C – – Jimsonweed C* 4 1 to 3 Kochia (non-ALS resistant) C 4 1 to 3 Lambsquarters, common C* R 1 to 2 Mallow, Venice R – – Marshelder C 4 1 to 3 Morningglory, entireleaf R 2 1 to 2 ivyleaf R 2 1 to 2 pitted R 2 1 to 2 smallflower C 4 1 to 3 tall R 2 1 to 2 Mustard spp. C 4 1 to 3 Nightshade, black C 4 1 to 3 Eastern black C 4 1 to 3 hairy C 4 1 to 3 Pigweed, redroot C 8 1 to 8 smooth C 8 1 to 8 spiny C 8 1 to 8 Poinsettia, wild C – – Puncturevine C – – Purslane, common C – – Pusley, Florida C – – Ragweed, common R 4 1 to 3 giant R 4 1 to 3 Sage, barnyard – R 1 to 3 (continued) 11

Weeds Controlled (Clearfield® Corn) (continued) Soil Applied Postemergence Maximum Size Leaf Stage (inches) Broadleaf Weeds (continued) Sida, prickly C* – – Smartweed, ladysthumb C 4 1 to 3 Pennsylvania C 4 1 to 3 Spurge, prostrate C 4 1 to 3 spotted C 4 1 to 3 Sunflower C* 4 1 to 3 Velvetleaf C* 4 1 to 3 Thistle, Canada – R 1 to 3 Grass Weeds and Sedges Barnyardgrass R 3 1 to 3 Crabgrass, large R 3 1 to 3 smooth R 3 1 to 3 Cupgrass, woolly – 3 1 to 3 Foxtail, giant C 6 1 to 6 green C 3 1 to 3 yellow C 3 1 to 3 Goosegrass R – – Johnsongrass, rhizome – R 6 to 12 seedling C 6 1 to 8 Millet, wild proso R R 1 to 3 Nutsedge, purple R R 1 to 3 yellow R R 1 to 3 Panicum, fall R – – Texas R – – Red rice – 3 1 to 3 Sandbur, field R R <1 Shattercane R 6 1 to 8 Signalgrass, broadleaf R 4 1 to 8 Sorghum almum R 6 1 to 3

• When Pursuit® herbicide is soil applied, these weeds are more consis- tently controlled by preplant incorporated treatments. Tank Mix Herbicides Pursuit is active against many broadleaf and grass weed species. However, for long-term weed management, alter- nate mode-of-action herbicides are recommended with Pursuit. The application of a soil-applied grass herbicide underlay will control grass weeds not on the Pursuit label and enhance control of certain broadleaf weeds such as common lambsquarters. Pursuit controls many grass species. However, when heavy grass pressure is anticipated, a soil-applied grass herbicide underlay (such as Outlook ® herbicide or Prowl® H2O herbicide) is recommended for optimum control. DO NOT incorporate Prowl H2O; apply preemergence or early postemergence only. Pursuit may also be used in sequential programs with registered burn- down herbicides and/or soil-applied atrazine-containing products. When Pursuit is used in combination with another herbi- cide, refer to the respective label for rates, methods of application, proper timing, weeds controlled, restrictions and precautions. Always use in accordance with the most restrictive label restrictions and precautions. DO NOT exceed label rates. DO NOT mix Pursuit with any product containing a label prohibiting such mixtures. North Dakota and Minnesota (north of Highway #210) Apply Pursuit postemergence only to Clearfield corn at 3 fl ozs/A in North Dakota and Minnesota (north of Highway #210). Weeds Controlled Postemergence Maximum Size Leaf Stage (inches) Kochia (non-ALS resistant) 4 1 to 3 Mustard spp. 4 1 to 3 Nightshade, black 4 1 to 3 Eastern black 4 1 to 3 hairy 4 1 to 3 Pigweed, redroot 4 1 to 4 Wild oat* 3 1 to 4
• Pursuit will reduce competition from wild oat. 12

Pursuit® herbicide is effective in controlling many annual broadleaf and grass weeds in Conservation Reserve Program (CRP) and Agricultural Reserve Program (set- aside) land seeded to forage legume cover crops: alfalfa, birdsfoot trefoil, clover, crown vetch, kudzu, lespedeza, lupin, milk vetch, sainfoin, trefoil, velvet bean, and vetch. NOTE: Cover crops may also be planted into fields previ- ously treated with Pursuit for weed control in soybeans. In this case, DO NOT apply Pursuit to the cover crop until the following spring. Pursuit application may result in temporary reduction in growth of legumes. Plants overcome temporary effects and become well established because of reduced weed competition. Pursuit may be applied postemergence at 4 fl ozs/A to seedling legumes (with at least 3 fully expanded trifoliate leaves) or to established legumes. On established legumes, Pursuit may be applied in the fall or spring before weeds exceed the maximum specified size for control. DO NOT make more than one application of Pursuit per year. Refer to Soybean section in Use-specific Information for weeds controlled. Edamame (Vegetable Soybean) Application Instructions Pursuit use on edamame may lead to crop injury or loss. Users or growers should evaluate Pursuit for crop response on the varieties being grown to determine if Pursuit use is acceptable. Preplant, Preemergence, or Early Postemergence. Apply 4 fl ozs/A of Pursuit (0.063 lb ae/A of imazethapyr) to actively growing crop and weeds. Base application tim- ing on weed size and crop growth stage. When applying Pursuit early postemergence, apply Pursuit between the first and third trifoliate stage when weeds are less than 3-inches tall. NIS containing at least 80% active ingredient should be used at 1 quart per 100 gallons of spray solution. Crop-specific Restrictions • DO NOT make more than one application of Pursuit per year. • Replanting - If replanting is necessary in a field previous- ly treated with Pursuit, the field may be replanted to edamame. Rework the soil no deeper than 2 inches. DO NOT apply a second treatment of Pursuit. • Rotational Crop Restrictions - Edamame may be planted anytime after applying the specified rate of Pursuit for a labeled use. • Not for use in California. Weeds Controlled For weeds controlled or suppressed in edamame, refer to the Weeds Controlled (Soybean) table in Use-specific Information. Use directions for states east of and including: Colorado, New Mexico, North Dakota, South Dakota, and Wyoming (except states east of and including: Connecticut, Massachusetts, and Vermont). Refer to the following map for geographical use area. Application Instructions Reduced crop growth, quality, and yield, and/or delayed maturity may result from a Pursuit application to edible legume vegetables. Because crop maturity may be delayed, timing of harvest may need to be adjusted accordingly. DO NOT apply Pursuit if planting is delayed and chance of frost before maturity is likely. Apply Pursuit onlyif proper agronomic practices have been used, including good soil fertility, proper crop rotation, dis- ease and insect management, and tillage practices that eliminate compaction and hardpans. Plant lentils, lima beans, or peas at least 1/2-inch deep to reduce risk of crop injury. DO NOT apply Pursuit if cold and/or wet conditions are present or predicted to occur within one week of application. DO NOT apply Pursuit postemergence to chickpea, lentil, lima bean, or white lupin. DO NOT apply Pursuit postemergence before crop has at least one trifoliate leaf or peas are at least three inches in height or crop injury (reduced crop growth and/or delayed maturity) may result. Adzuki, Black Turtle, Chickpea (Garbanzo Bean), Cranberry, Dry Edible Peas, English Pea, Great Northern, Lentil, Lima, Navy, Pinto, Red Kidney, Small White-type Dry Beans, Southern Pea, and White Lupin Conservation Reserve Program (CRP) and Agricultural Reserve Program Land Seeded to Forage Legume Cover Crops 13

DO NOT apply Pursuit® herbicide post emergence after crop has begun to flower or crop injury may result. Refer to specific legume vegetable crop for specific application timings. Use only nonionic surfactants as a spray additive for postemergence applications. DO NOT use crop oils, methylated seed oils, or petroleum oils. Some varieties may be more sensitive to applications of Pursuit. Verify with the seed supplier the crop tolerance of the variety to be planted. Application Instructions • Michigan or the Delaware, Maryland, and Virginia (DelMarVa) Peninsula - DO NOT apply more than 2 fl ozs/A of Pursuit to sand or loamy sand soils. • North Dakota or north of Highway #210 in Minnesota - DO NOT apply more than 2 fl ozs/A of Pursuit. Preplant Incorporated. Apply Pursuit at up to 3 fl ozs/A to dry beans (adzuki, black turtle, cranberry, great north- ern, navy, pinto, red kidney, and small white-type dry beans), dry edible peas, and English pea, or up to 4 fl ozs/A for southern pea only, within 1 week before planting. Applied preplant incorporated, Pursuit may be tank mixed with a registered grass herbicide. Preemergence. Apply Pursuit at up to 3 fl ozs/A to dry beans, dry edible peas, and English pea, or up to 4 fl ozs/A for southern pea only, immediately after, or up to 3 days after planting. Pursuit may be applied in a tank mix with a registered grass herbicide or applied preemergence follow- ing a preplant incorporated application of a registered grass herbicide. Early Postemergence. Apply Pursuit at up to 3 fl ozs/A to dry beans, dry edible peas, and English pea, or up to 4 fl ozs/A for southern pea only. Apply to dry beans with at least one fully expanded trifoliate leaf. Apply to dry edible peas, English pea, and southern pea at least 3 inches in height but before 5 nodes and before flowering. Use of trifluralin before Pursuit application may increase the likeli- hood and severity of crop injury. Nonionic surfactant must be added to the spray solution. Nonionic surfactant must contain at least 80% active ingredient and be used at 2 pints per 100 gallons of spray mixture. Tank Mix Herbicides Basagran® 5L herbicide may be tank mixed with Pursuit to control weeds not listed on the Pursuit label. Addition of Basagran 5L may also cause antagonism, thereby reducing control of grass weeds. Nitrogen-based fertilizer may be included as a spray additive ONLY when Pursuit is tank mixed with Basagran 5L. Refer to the Basagran 5L label for proper application rates and restrictions. Always use in accordance with the most restrictive label restrictions and precautions. Chickpea (Garbanzo), Lentil, Lima Bean, and White Lupin Application Instructions • DO NOT apply Pursuit to white lupins grown on sand or loamy sand soils. • Michigan or the Delaware, Maryland, and Virginia (DelMarVa) Peninsula - DO NOT apply more than 2 fl ozs/A of Pursuit to sand or loamy sand soils. • North Dakota or north of Highway #210 in Minnesota - DO NOT apply more than 2 fl ozs/A of Pursuit. Preplant Incorporated. Apply Pursuit at up to 3 fl ozs/A within 1 week before planting. Applied preplant incorporat- ed, Pursuit may be tank mixed with a registered grass herbicide. Preemergence. Apply Pursuit at up to 3 fl ozs/A immedi- ately after or up to 3 days after planting. Pursuit may be applied in a tank mix with a registered grass herbicide or applied preemergence following a preplant incorporated application of a registered grass herbicide. Crop-specific Restrictions • A maximum of 4 fl ozs/A of Pursuit (0.063 lb ae/A of imazethapyr) may be applied per year to southern pea only in this region. • A maximum of 3 fl ozs/A of Pursuit (0.047 lb ae/A of imazethapyr) may be applied per year to other peas and beans in this region. • DO NOT apply this product through any type of irrigation system. • DO NOT make more than one application of Pursuit per year. • DO NOT apply Pursuit postemergence to chickpea, lentil, lima bean, or white lupin. • Allow at least 30 days between application and harvest of chickpea (Arizona and California), English pea, snap bean, southern pea, and succulent lima bean. • Allow at least 60 days between application and harvest of chickpea, dry edible peas, lentil, red kidney bean, and other dry bean or pea types listed on this label. Weeds Controlled Pursuit applied at 2 fl ozs/A preplant incorporated, preemergence, or early postemergence will control: Mustard, wild Nightshade, black* Nightshade, Eastern black*

• Suppression only Adzuki, Black Turtle, Cranberry, Dry Edible Peas, English Pea, Great Northern, Navy, Pinto, Red Kidney, Small White-type Dry Beans, and Southern Pea 14

Pursuit® herbicide applied at 3 fl ozs/A preplant incorporated, preemergence, or early postemergence will control: Mustard, wild Nightshade, black Nightshade, Eastern black Nightshade, hairy Pigweed, redroot Postemergence applications of 3 fl ozs/A must be made to weeds less than 2-inches tall for best results. When applied as directed at 4 fl ozs/A in southern peas ONLY, Pursuit will control or reduce competition from weeds in the following tables. NOTE: C = Control R = Reduced Competition Maximum Leaf Stage column indicates the maximum number of leaves to spray weeds post emergence. DO NOT count cotyledon leaves when determining weed stage of growth. When soil applied to grasses, more consistent control can be obtained from preplant incorporated treatments. Weeds Controlled (4 fl ozs/A in Southern Pea ONLY) Soil Applied Postemergence Maximum Size Leaf Stage (inches) Broadleaf Weeds Anoda, spurred C 2 1 to 2 Artichoke, Jerusalem – 8 6 to 10 Bristly starbur – 2 1 to 2 Buffalobur C* – – Carpetweed C – – Cocklebur, common C* 8 1 to 8 Galinsoga C – – Jimsonweed C** 4 1 to 3 Kochia (non-ALS resistant) C 4 1 to 3 Lambsquarters, common C** R 1 to 2 Mallow, Venice R – – Morningglory, entireleaf R 2 1 to 2 ivyleaf R 2 1 to 2 pitted R 2 1 to 2 smallflower C 4 1 to 3 tall R 2 1 to 2 Mustard spp. C 4 1 to 3 Nightshade, black C 4 1 to 3 Eastern black C 4 1 to 3 hairy C 4 1 to 3 (continued) Weeds Controlled (4 fl ozs/A in Southern Pea ONLY) (continued) Soil Applied Postemergence Maximum Size Leaf Stage (inches) Broadleaf Weeds (continued) Pigweed, redroot C 4 1 to 4 smooth C 4 1 to 4 spiny C 4 1 to 4 Poinsettia, wild C – – Puncturevine C – – Purslane, common C – – Pusley, Florida C – – Ragweed, common R 4 1 to 3 giant R 4 1 to 3 Sage, barnyard – R 1 to 3 Sida, prickly C** – – Smartweed, ladysthumb C 4 1 to 3 Pennsylvania C 4 1 to 3 Spurge, prostrate C 4 1 to 3 spotted C 4 1 to 3 Sunflower, common C** 4 1 to 3 Thistle, Canada – R 1 to 3 Velvetleaf C** 4 1 to 3 Grass Weeds and Sedges Barnyardgrass R 3 1 to 3 Crabgrass, large R 3 1 to 3 smooth R 3 1 to 3 Cupgrass, woolly – 3 † 1 to 3 Foxtail, giant C 6 1 to 6 green C 3 1 to 3 robust purple C 3 1 to 3 robust white C 3 1 to 3 yellow C 3 1 to 3 Goosegrass R – – Johnsongrass, rhizome – R 1 to 8 seedling C 6 1 to 8 Nutsedge, purple R R 1 to 3 yellow R R – (continued) 15

Weeds Controlled (4 fl ozs/A in Southern Pea ONLY) (continued) Soil Applied Postemergence Maximum Size Leaf Stage (inches) Grass Weeds and Sedges (continued) Panicum, fall R – – Texas R – – Red rice – 3 1 to 3 Shattercane R 6 1 to 8 Signalgrass, broadleaf R 4 1 to 8 Use soil applications for light-to-moderate infestations only. Must be preplant incorporated for best results. When soil applied, common lambsquarters, jimsonweed, prickly sida, velvetleaf and common sunflower are more consistently controlled by preplant incorporated treatments. † Pursuit® herbicide controls emerged woolly cupgrass only. Chickpea, Dry Edible Peas, Lentil, Lima Bean, and Succulent Peas Use Directions in Idaho, Montana, Nevada, Oregon, Utah, and Washington Application Instructions Preplant for No-till and Minimum Tillage Systems Only. Apply Pursuit at 3 fl ozs/A within 30 days before planting. If incorporated, DO NOT incorporate deeper than 3 inches. In no-till and minimum tillage systems, Pursuit may be applied in the fall before spring planting. Rainfall is required for incorporation and activation. Unpredictable weed con- trol can be expected because factors such as length of time between application and planting as well as uncontrol- lable weather factors will determine herbicide activity and longevity. Apply Pursuit in the fall when soil temperature at the 4-inch depth is less than 55° F and before the ground is frozen. Preplant Incorporated. Apply Pursuit at 3 fl ozs/A within 1 week before planting. DO NOT incorporate deeper than 3 inches. Preemergence. Apply Pursuit at 3 fl ozs/A after planting but before crop emergence. Postemergence (dry edible peas ONLY). Apply Pursuit at 2 fl ozs/A. Nonionic surfactant must be added to the spray solution. Nonionic surfactant must contain at least 80% active ingredient and be used at 2 pints per 100 gal- lons of spray mixture. DO NOT apply Pursuit postemergence before crop has at least one trifoliate leaf, or peas are at least three inches in height, or crop injury (reduced crop growth and/or delayed maturity) may result. Basagran ® 5L herbicide may be tank mixed with Pursuit to control weeds not listed on the Pursuit label. Addition of Basagran 5L may also cause antagonism, thereby reducing control of grass weeds. Nitrogen-based fertilizer may be included as a spray additive ONLY when Pursuit is tank mixed with Basagran 5L. Use liquid fertilizer at 1.25 to 2.5 gallons per 100 gallons of spray solution or AMS at 12 to 15 lbs/100 gallons of spray solution. Crop-specific Restrictions • A maximum of 3 fl ozs/A of Pursuit (0.047 lb ae/A of imazethapyr) may be applied per year to peas and beans in this region. • DO NOT make more than one application of Pursuit per year. • DO NOT apply Pursuit postemergence to chickpea, lentil, or lima bean. • Allow at least 30 days between application and harvest for succulent lima bean and succulent peas. • Allow at least 60 days between application and harvest for chickpea, dry edible peas, dry lima bean, and lentil. Weeds Controlled NOTE: C = Control Weeds Controlled (3 fl ozs/A) Preplant Incorporated Preemergence Buckwheat, wild C C Kochia (non-ALS resistant) C C Lambsquarters, common C – Mustard, wild C C Nightshade, black C C Eastern black C C hairy C C Pigweed, redroot C C Shepherd’s-purse C C Thistle, Russian C C Pursuit applied postemergence at 2 fl ozs/A will control: Wild mustard Black nightshade Eastern black nightshade Hairy nightshade

• Suppression only Chickpea Use Directions in Arizona and California Application Instructions Preplant Incorporated. Apply Pursuit at up to 3 fl ozs/A within 1 week before planting. Applied preplant incorporat- ed, Pursuit may be tank mixed with a registered grass herbicide. Preemergence. Apply Pursuit at up to 3 fl ozs/A immedi- ately after or up to 3 days after planting. Pursuit may be applied in a tank mix with a registered grass herbicide or 16

applied preemergence following a preplant incorporated application of a registered grass herbicide. Crop-specific Restrictions • A maximum of 3 fl ozs/A of Pursuit® herbicide (0.047 lb ae/A of imazethapyr) may be applied per year to chickpeas in this region. • DO NOT make more than one application of Pursuit per year. • Allow at least 30 days between application and harvest of succulent chickpeas. • Allow at least 60 days between application and harvest of dry chickpeas. Weeds Controlled NOTE: C = Control Weeds Controlled Preplant Incorporated Preemergence Buckwheat, wild C C Kochia (non-ALS resistant) C C Lambsquarters, common C – Mustard, wild C C Nightshade, black C C Eastern black C C hairy C C Pigweed, redroot C C Shepherd’s-purse C C Thistle, Russian C C Red Kidney Bean Use Directions in California Application Instructions Postemergence. Apply Pursuit at 3 fl ozs/A. Nonionic surfactant must be added to the spray solution. Nonionic surfactant must contain at least 80% active ingredient and be used at 2 pints per 100 gallons of spray mixture. Apply Pursuit when weeds are actively growing and red kidney beans have at least 1 fully expanded trifoliate leaf. DO NOT apply Pursuit postemergence before crop has at least one true leaf or crop injury (reduced crop growth and/or delayed maturity) may result. DO NOT apply Pursuit postemergence when the crop and weeds have been subjected to stress conditions such as temperature or moisture extremes. For maximum weed control, cultivate 7 to 10 days after a post emergence Pursuit application to enhance residual weed control, especially under dry conditions. Crop-specific Restrictions • DO NOT apply by aerial application. • A maximum of 3 fl ozs/A of Pursuit (0.047 lb ae/A of imazethapyr) may be applied per year to red kidney beans. • DO NOT make more than one application of Pursuit per year. • Allow at least 60 days between application and harvest. Weeds Controlled When applied as directed, Pursuit will control or reduce competition from weeds in the following table. Refer to the Mixing Instructions section for recommendations of additives when weeds are at the maximum specified growth stage or are under stress. Maximum Leaf Stage column indicates the maximum number of leaves to spray weeds post emergence. Weeds Controlled Postemergence Maximum Size Leaf Stage (inches) Kochia (non-ALS resistant) 4 1 to 3 Mustard, wild 4 1 to 3 Nightshade, black 4 1 to 3 Eastern black 4 1 to 3 hairy 4 1 to 2 Pigweed, redroot 4 1 to 3 Snap Bean Snap Bean Use Directions in Alabama, Florida, Georgia, Illinois, Indiana, Iowa, Minnesota, Michigan, New Jersey, North Carolina, and Wisconsin Application Instructions Preplant Incorporated. Apply Pursuit at 1.5 fl ozs/A within 1 week of planting. Applied preplant incorporated, Pursuit may be tank mixed with a registered grass herbicide. Preemergence. Apply Pursuit at 1.5 fl ozs/A immediately after or up to 1 day after planting. Pursuit may be applied in a tank mix with a registered grass herbicide or applied preemergence after a preplant incorporated application of a registered grass herbicide. Crop-specific Restrictions • DO NOT apply by aerial application. • DO NOT apply Pursuit after July 31 (June 20 in New Jersey). • A maximum of 1.5 fl ozs/A of Pursuit (0.023 lb ae/A of imazethapyr) may be applied per year to snap bean. • DO NOT make more than one application of Pursuit per year. • Allow at least 30 days between application and harvest. 17

18 Weeds Suppressed Pursuit® herbicide applied at 1.5 fl ozs/A preplant incor- porated or preemergence will suppress or reduce competition of the following weeds: Common purslane Eastern black nightshade Redroot pigweed Wild mustard Snap Bean Use Directions in Arkansas, Missouri, New Mexico (counties of Curry and Roosevelt only), North Carolina, Oklahoma, and Texas (counties of Bailey, Castro, Lamb, and Parmer only) Application Instructions Postemergence. Apply Pursuit at 1.5 fl ozs/A in a tank mix combination with Basagran® 5L herbicide; refer to the Basagran 5L label for application rates and restric- tions. Nonionic surfactant must be added to the spray solution. Nonionic surfactant must contain at least 80% active ingredient and be used at 2 pints per 100 gallons of spray mixture. DO NOT apply Pursuit postemergence before crop has at least one true leaf or crop injury (reduced crop growth and/or delayed maturity) may result. Crop-specific Restrictions • DO NOT apply by aerial application. • DO NOT apply Pursuit after July 31. • A maximum of 1.5 fl ozs/A of Pursuit (0.023 lb ae/A of imazethapyr) may be applied per year to snap bean. • DO NOT make more than one application of Pursuit per year. • Allow at least 30 days between application and harvest. Weeds Suppressed Pursuit applied postemergence at 1.5 fl ozs/A will suppress or reduce competition of the following weeds: Eastern black nightshade Redroot pigweed Peanut Application Instructions Apply Pursuit at 4 fl ozs/A for all methods of application except sequential (see instructions following): preplant incorporated, preemergence, ground-cracking, and postmergence. At this rate, 1 gallon of Pursuit will treat 32 acres of peanuts. Pursuit may also be applied in sequential application. Apply 2 fl ozs/A in a soil application (preplant incorporated or preemergence) followed by 2 fl ozs/A applied at ground- crack or post emergence. Classic ® herbicide may be applied post emergence to peanuts following a Pursuit application. Refer to the Classic label for specific use recommendations. Crop-specific Restrictions • A maximum of 4 fl ozs/A of Pursuit (0.063 lb ae/A of imazethapyr) may be applied per year to peanuts. • DO NOT graze or feed treated peanut forage, vines, hay, or straw to livestock. • DO NOT harvest peanuts for at least 85 days after Pursuit application. • Replanting - In the event of a crop loss because of weather, peanuts can be replanted. DO NOT work the soil deeper than 2 inches. • NOTE: In Arizona, for use only in Yuma and La Paz counties. • Not for use in California. Weeds Controlled When applied as directed, Pursuit will control or reduce competition from the following listed weeds. Refer to Mixing Instructions section for recommendations of additives when weeds are at the maximum specified growth stage or are under stress. NOTE: C = Control R = Reduced Competition Maximum Leaf Stage column indicates the maximum number of leaves to spray weeds post emergence. DO NOT count cotyledon leaves when determining weed stage of growth. At-crack Application refers to the time when soil cracks because of the emerging peanut seedling, which usually occurs from 10 to 14 days after planting. At this time weeds have generally not germinated or are in the seedling stage. If weeds have more than 2 true leaves, refer to the Postemergence weed control column for weeds controlled. In west Texas and New Mexico, wait until late cracking (most of the peanuts have emerged) before applying Pursuit. Pursuit is active against many broadleaf and grass weeds. However, when heavy grass or common lambsquarters pressure is anticipated, use Pursuit in combination with a registered soil-applied grass herbicide. When Pursuit is soil applied to grasses, more consistent control can be obtained from preplant incorporated treatments. When Pursuit is soil applied for control of nutsedge in peanut, incorporate with two passes of the incorporation implement. Make the second pass at an offset angle to the first pass to minimize the potential for streaking.

Weeds Controlled (Peanut) Soil Applied At Crack Postemergence Maximum Size Leaf Stage (inches) Broadleaf Weeds Alligator weed – C 4 1 to 3 Anoda, spurred C C 2 1 to 2 Bristly starbur – – 2 1 to 2 Buffalobur C* C R 1 to 3 Carpetweed C C – – Cocklebur, common R C 8 1 to 8 Devil’s claw C C – – Galinsoga C C – – Jimsonweed C* C 4 1 to 3 Lambsquarters, common C* C R 1 to 2 Morningglory, entireleaf R C 2 1 to 2 ivyleaf R C 2 1 to 2 pitted R C 2 1 to 2 smallflower C C 4 1 to 3 tall R C 2 1 to 2 Mustard spp. C C 4 1 to 3 Nightshade, black C C 4 1 to 3 Eastern black C C 4 1 to 3 hairy C C 4 1 to 3 Pigweed, redroot C C 8 1 to 8 smooth C C 8 1 to 8 spiny C C 8 1 to 8 Poinsettia, wild C C – – Puncturevine C C – – Purslane, common C C – – Pusley, Florida C C – – Ragweed, common R R 4 1 to 3 giant R R 4 1 to 3 Sida, prickly (Teaweed) C* C – – Smartweed, ladysthumb C C 4 1 to 3 Pennsylvania C C 4 1 to 3 Spurge, prostrate C C 4 1 to 3 spotted C C 4 1 to 3 toothed C C – – Sunflower C* C 4 1 to 3 Velvetleaf C* C 4 1 to 3 (continued) 19

Weeds Controlled (Peanut) (continued) Soil Applied At Crack Postemergence Maximum Size Leaf Stage (inches) Grass Weeds and Sedges Barnyardgrass R R 3 1 to 3 Crabgrass, large R C 3 1 to 3 smooth R C 3 1 to 3 Cupgrass, woolly – – 3 1 to 3 Foxtail, giant C C 6 1 to 6 green C C 3 1 to 3 yellow C C 3 1 to 3 Goosegrass R R – – Johnsongrass, rhizome – – R 6 to 12 seedling C C 6 1 to 8 Nutsedge, purple C C 3 1 to 3 yellow C C 3 1 to 3 Panicum, fall R – – – T e x a s R––– Red rice – – 3 1 to 3 Shattercane R R 6 1 to 8 Signalgrass, broadleaf R C 4 1 to 6

• When Pursuit® herbicide is soil applied, these weeds are more consistently controlled by preplant incorporated treatments. Weeds Controlled by Sequential Applications of Pursuit Sequential (split) application of Pursuit is 2 fl ozs/A of product soil applied (preplant incorporated or preemergence) fol- lowed by 2 fl ozs/A applied at ground-crack or post emergence. When applied as a sequential treatment, Pursuit controls weeds listed in Soil Applied and At Crack applications in the Weeds Controlled (Peanut) table and enhances control of purple and yellow nutsedge. Apply the second application before nutsedge exceeds 3 leaves. Tank Mix Herbicides Control of additional grass and/or broadleaf weeds requires a tank mix or sequential use with another herbicide. Pursuit may be tank mixed, or used in sequence with herbicides approved for use in peanut, such as Outlook® herbicide or Prowl® H2O herbicide. Read and follow applicable restrictions and limitations and directions for use on all products involved in tank mixing. Always follow the most restrictive label use directions. 20

Soybean Application Instructions Apply Pursuit® herbicide before soybean bloom at 4 fl ozs/A for all methods of application: early preplant, pre- plant incorporated, preemergence, and post emergence (including minimum tillage and no-till). Application may be made up to 45 days before planting soybeans. See addi- tional state-specific soybean application instructions section for North Dakota and Minnesota (north of Highway #210). DO NOT tank mix Pursuit with clomazone-containing herbicides such as Command ® herbicide. Pursuit may be applied postemergence following a soil application of a clomazone-containing herbicide such as Command. If soybeans are furrow irrigated, till the soil before planting winter wheat or barley. Break up beds and mix soil with tillage equipment set to cut 4-inches to 6-inches deep. Crop-specific Restrictions • A maximum of 4 fl ozs/A of Pursuit (0.063 lb ae/A of imazethapyr) may be applied per year to soybeans. • DO NOT make more than one application of Pursuit per year. • DO NOT graze or feed treated soybean forage, hay, or straw to livestock. • DO NOT harvest soybeans for at least 85 days after Pursuit application. • Replanting - In the event of a crop loss because of weather, soybeans can be replanted. DO NOT work the soil deeper than 2 inches. • Not for use in California. Weeds Controlled When applied as directed, Pursuit will control or reduce competition from weeds listed in the following table. Refer to the Mixing Instructions section for recommendations of additives when weeds are at the maximum specified growth stage or are under stress. NOTE: C = Control R = Reduced Competition Maximum Leaf Stage column indicates the maximum number of leaves to spray weeds post emergence. DO NOT count cotyledon leaves when determining weed stage of growth. Preplant incorporated treatments of Pursuit are more con- sistent for grass control. Pursuit is active against many broadleaf and grass species. However, when heavy grass or common lamb- squarters pressure is anticipated, use Pursuit in combination with a registered soil-applied grass herbicide (such as Prowl ® H2O herbicide) for optimum control. Weeds Controlled (Soybean) Soil Applied Postemergence Maximum Size Leaf Stage (inches) Broadleaf Weeds Alligator weed – 4 1 to 3 Anoda, spurred C 2 1 to 2 Artichoke, Jerusalem – 8 6 to 10 Bristly starbur – 2 1 to 2 Buffalobur C* R 1 to 3 Carpetweed C – – Cocklebur, common R 8 1 to 8 Galinsoga C – – Jimsonweed C* 4 1 to 3 Kochia (non-ALS resistant) C 4 1 to 3 Lambsquarters, common C* R 1 to 2 Mallow, Venice R – – Marshelder C 4 1 to 3 Morningglory, entireleaf R 2 1 to 2 ivyleaf R 2 1 to 2 pitted R 2 1 to 2 smallflower C 4 1 to 3 tall R 2 1 to 2 Mustard spp. C 4 1 to 3 Nightshade, black C 4 1 to 3 Eastern black C 4 1 to 3 hairy C 4 1 to 3 Pigweed, redroot C 8 1 to 8 smooth C 8 1 to 8 spiny C 8 1 to 8 Poinsettia, wild C – – Puncturevine C – – Purslane, common C – – Pusley, Florida C – – Ragweed, common R R 1 to 3 giant R R 1 to 3 Sage, barnyard R 1 to 3 – Sida, prickly C* – – Smartweed, ladysthumb C 4 1 to 3 Pennsylvania C 4 1 to 3 (continued) 21

Weeds Controlled (Soybean) (continued) Soil Applied Postemergence Maximum Size Leaf Stage (inches) Broadleaf Weeds (continued) Spurge, prostrate C 4 1 to 3 spotted C 4 1 to 3 Sunflower C* 4 1 to 3 Thistle, Canada – R 1 to 3 Velvetleaf C* 4 1 to 3 Grass Weeds and Sedges Barnyardgrass R 3 1 to 3 Crabgrass, large R 3 1 to 3 smooth R 3 1 to 3 Cupgrass, woolly** – 3 1 to 3 Foxtail, giant C 6 1 to 6 green C 3 1 to 3 yellow C 3 1 to 3 Goosegrass R – – Johnsongrass, rhizome – R 6 to 12 seedling C 6 1 to 8 Millet, wild proso R R 1 to 3 Nutsedge, purple R R 1 to 3 yellow R R 1 to 3 Panicum, fall R – – Texas R – – Red rice – 3 1 to 3 Shattercane R 6 1 to 8 Signalgrass, broadleaf R 4 1 to 8 Sorghum, almum R 6 1 to 3 *When Pursuit® herbicide is soil applied, these weeds are more consis- tently controlled by preplant incorporated treatments. **Pursuit controls emerged woolly cupgrass only. Tank Mix Herbicides Control of additional grass and/or broadleaf weeds requires a tank mix or sequential use with another herbicide. Pursuit may be tank mixed or used in sequence with herbicides approved for use in soybean, such as Outlook ® herbicide, Prowl® H2O herbicide, or Zidua® herbicide. Read and follow applicable restrictions and limitations and directions for use on all products involved in tank mixing. Always follow the most restrictive label use directions. Grass Weeds A selective post emergence grass herbicide such as Poast® herbicide may be tank mixed with Pursuit to control vol- unteer corn or grasses not controlled by Pursuit. For best results, use crop oil concentrate AND liquid fertilizer with grass herbicide tank mixtures. Tank Mix with Poast. Apply Pursuit at 4 fl ozs/A. Refer to the Poast label for the appropriate rate of Poast for enhanced grass control and for additional weeds con- trolled, sizes, and rates. If a mixture of grass weeds is present, use the highest rate for the grass weeds present. The addition of Poast to Pursuit at labeled rates will con- trol the following annual grass weeds. The addition of Poast to Pursuit enhances grass control, especially when heavy infestations of grass exist. It also provides control of grasses not controlled by Pursuit. In some cases, the activity of Poast may be reduced when mixed with Pursuit. The reduction in activity may be overcome by delaying the application of Poast 7 days fol- lowing the application of Pursuit. If Poast is applied first, wait 3 days before applying Pursuit. For optimum control, apply the tank mixture to actively growing weeds at the sizes indicated in the preceding table. For sequential applications, refer to application rates and weeds sizes indicated in the Pursuit and Poast labels. Refer to the Poast label for additional information about application rates, restrictions, precautions, weeds controlled, adjuvants recommended, and other information. Broadleaf Weeds Broadleaf herbicides that can be tank mixed with Pursuit include Basagran® 5L herbicide, Cobra® herbicide, FirstRate® herbicide, Flexstar® herbicide, Annual Grass Weeds Controlled Size (inches) Crabgrass, large 3 to 6Crabgrass, smooth Goosegrass Barnyardgrass 3 to 8 Cupgrass, woolly Foxtail, giant Foxtail, green Foxtail, yellow Johnsongrass, seedling Junglerice Panicum, fall Panicum, Texas Signalgrass, broadleaf Sprangletop, red Witchgrass Shattercane 3 to 12 Corn, volunteer 4 to 10Wild proso millet 22

Reflex® herbicide, Storm® herbicide, or Ultra Blazer® herbicide. Roundup Ultra® herbicide may be tank mixed with Pursuit® herbicide to aid in control of certain weeds only in Roundup Ready® soybeans. DO NOT apply certain herbicides with Pursuit; read all of the Soybean section for restrictions. Tank Mix with Ultra Blazer. Addition of Ultra Blazer to Pursuit at specified rates will enhance control of several broadleaf weeds. Refer to Ultra Blazer label for additional weeds controlled. When tank mixing Ultra Blazer with Pursuit, apply Pursuit at 4 fl ozs/A. Apply Ultra Blazer at the following rates, depending on weed size. Ultra Blazer Sequential Application Rates. When applying Ultra Blazer following a Pursuit application (sequential), apply Ultra Blazer at the following rates. Tank Mix with FirstRate® herbicide. FirstRate may be tank mixed with Pursuit to aid in control of common and giant ragweed. See FirstRate label for specified rates and precautions. Tank Mix with Sulfentrazone-containing Compounds. Pursuit provides control of many grass and broadleaf weeds when applied to the soil or applied post emergence to weeds. It also provides season-long control of many weeds. Sulfentrazone-containing products (such as Authority ® herbicide) may be tank mixed with Pursuit in soil applications for enhanced weed control in soybeans. Pursuit may be applied post emergence to soybeans pre- viously treated with sulfentrazone-containing products. NOTE: Sulfentrazone-containing products are only labeled for soil applications to soybeans. Tank Mix with Harmony® SG herbicide. For optimal weed control management of common lambsquarters, apply a soil-applied grass herbicide such as Prowl ® H2O herbicide, or trifluralin followed by Pursuit postemergence. If common lambsquarters are not adequately controlled by the soil-applied treatment, Harmony SG may be tank mixed with Pursuit for additional activity. Addition of Harmony SG to Pursuit may cause severe injury and/or stunting to soybeans, especially when applied under hot, humid conditions. The USER ASSUMES ALL RISKS AND CONSEQUENCES associated with applica- tions of this tank mix to soybeans. When tank mixing Harmony SG with Pursuit, use the fol- lowing rates: Pursuit at 4 ozs/A AND Harmony SG at 1/24 oz/A Add to the spray mixture: NIS at 1 quart per 100 gallons (0.25% v/v) AND Liquid nitrogen-based fertilizer (such as 28%N, 32%N, or 10-34-0) at 1.25 to 2.5 gallons per 100 gallons of spray solution. Instead of a liquid fertilizer, spray grade AMS may be used at 12 to 15 lbs per 100 gallons of spray solution. Apply to 1 to 3 trifoliate stage soybeans only. North Dakota and Minnesota (north of Highway #210) Apply Pursuit postemergence only to soybean at 3 fl ozs/A in North Dakota and Minnesota (north of Highway #210). Weeds Controlled Postemergence Maximum Size Leaf Stage (inches) Cocklebur, common1 4 1 to 4 Kochia (non-ALS resistant) 4 1 to 3 Mustard spp. 4 1 to 3 Nightshade, black 4 1 to 3 Eastern black 4 1 to 3 hairy 4 1 to 3 Pigweed, redroot 4 1 to 4 Wild oat2 3 1 to 4 1 For control of common cocklebur, add Ultra Blazer at 12 fl ozs/A to the spray solution. 2 Pursuit will reduce competition from wild oats. Weed Ultra Blazer Rate (fl ozs/A) 8 to 10 12 to 14 16 to 20 Weed Size (inches) Common ragweed 1 to 4 4 to 6 6 to 8* Pigweed spp. Waterhemp, common Waterhemp, tall Giant ragweed — 1 to 6 6 to 8**

• Use the higher rate if common ragweed is present or the weed popu- lation is high. ** Use the 20 fl ozs/A rate if giant ragweed is 6-inches to 8-inches tall. Weed Ultra Blazer Rate (fl ozs/A) 10 to 12 14 to 16 18 to 24 Weed Size (inches) Common ragweed 1 to 4 4 to 6 6 to 8* Pigweed spp. Waterhemp, common Waterhemp, tall Giant ragweed — 1 to 6 6 to 8**
• Use the higher rate if common ragweed is present or the weed popu- lation is high. ** Use the 24 fl ozs/A rate if giant ragweed is 6-inches to 8-inches tall. 23

Rotational Crop Restrictions The following rotational crops may be planted after apply- ing Pursuit® herbicide at the specified rate for a labeled use. Planting earlier than the specified interval may result in crop injury. NOTE: See Exceptions to Rotational Crop Restrictions following these guidelines. Rotational Interval following Pursuit Application

• Following forty months after a Pursuit application and before planting any crop not listed elsewhere in Rotational Crop Restrictions, a suc- cessful field bioassay must be completed. The field bioassay consists of a test strip of the intended rotational crop planted across the previously treated field and grown to maturity. The test strip should include low areas and knolls, and include variations in soil such as type and pH. If no crop injury is evident in the test strip, the intended rotational crop may be planted the following year. Sugar beet production can be reduced when grown in soil conditions with a pH less than 6.5. If the field is limed to adjust pH before planting rotational crops not listed in the Rotational Crop Restrictions, apply the lime at least 12 months before planting the rotational crop. Use of Pursuit in accordance with label directions is expected to result in normal growth of rotational crops in most situations; however, various environmental and agro- nomic factors make it impossible to eliminate all risks associated with the use of this product and, therefore, rota- tional crop injury is always possible. Exceptions to Rotational Crop Restrictions All Crops Full-rate application of products containing chlorimuron ethyl (Classic® herbicide, etc.), chloransulam-methyl (FirstRate® herbicide), flumetsulam (Hornet® herbicide), imazaquin (Scepter® 70 DG herbicide), or products con- taining imazethapyr the same year as Pursuit may increase the risk of injury to sensitive followcrops. Consult labels for recommended uses of these products in combinations. Only rotational crops harvested at maturity may be used for feed or food. Barley • North Dakota ONLY - Barley may be planted 18 months after Pursuit application. • Delaware, Indiana, Kentucky, Maryland, New Jersey, Ohio, Pennsylvania, and Virginia ONLY

• Barley may be planted 4 months after Pursuit application. Certain Vegetable Crops Alabama, Delaware, Florida, Georgia, Indiana, Kentucky, Maryland, New Jersey, North Carolina, Pennsylvania, South Carolina, and Virginia ONLY.The following crops may be planted 18 months following the last application of Pursuit: Bahiagrass, cabbage, cantaloupe, cucumber, Irish potato, onion, sweet pepper transplants, sweet potato transplants, tomato transplants, and watermelon. Clearfield® Canola Clearfield varieties of canola may be planted as a rotation- al crop the next season after an application of Pursuit at label rates on registered crops. Corn • Corn Inbred Seed Lines - Corn inbred seed lines may be planted the year following an application of Pursuit. Several seed companies have tested a wide range of inbreds for sensitivity to Pursuit soil residues and have reported good crop safety. However, due to the propri- etary nature of seed production, BASF has not been given access to the inbred data. Growers are directed to contact the seed company for information and recom- mendations regarding the planting of corn grown for seed in fields treated with Pursuit the previous year. Since Plant-back Interval (months) Crop(s) to be Grown Anytime Clearfield® corn hybrids (resistant/tolerant to Pursuit) Edamame Lima bean Peanut Peas Southern pea Soybean 2 Snap bean 4 Alfalfa Birdsfoot trefoil Clearfield wheat, non-Clearfield wheat Clover Edible beans (other than lima bean) Rye (except in North Dakota and Minnesota north of Highway #210) 8-1/2 Field corn Field corn grown for seed 9-1/2 Barley (except in North Dakota) Tobacco 18 Barley in North Dakota Cotton Lettuce Oat Popcorn Rye in North Dakota and Minnesota north of Highway #210 Safflower Sorghum Sunflower Sweet corn 26 Flax Potato 40 All crops not listed elsewhere in Rotational Crop Restrictions* 24

growing conditions, environmental conditions and grower practices are beyond the control of BASF, all risks and consequences associated with planting seed corn inbreds into fields treated previously with Pursuit ® herbicide shall be assumed by the user. • Field Corn and Field Corn Grown for Seed - Arizona, Hawaii, Idaho, Montana, Nevada, Oregon, Utah, Washington, and Wyoming. Field corn and field corn grown for seed may be planted nine and one-half months after Pursuit application. • Sweet Corn and Popcorn Varieties - Illinois, Indiana, Iowa, Minnesota, Ohio, Tennessee, and Wisconsin ONLY.Sweet corn and popcorn varieties may be planted the year following an application of Pursuit. Some sweet corn and popcorn varieties may be injured when planted at less than 18 months following an application of Pursuit. Before planting sweet corn for processing, con- tact the processor company for information and recommendations regarding the tolerance of sweet corn varieties planned for fields treated with Pursuit the previ- ous year. DO NOT plant fresh market sweet corn varieties before 18 months after Pursuit use. Before planting popcorn, contact the popcorn company for information and recommendations regarding the toler- ance of popcorn varieties planned for fields treated with Pursuit the previous year. Since growing conditions, environmental conditions and grower practices are beyond the control of BASF, ALL RISKS AND CONSEQUENCES ASSOCIATED WITH PLANTING SWEET CORN OR POPCORN VARIETIES INTO FIELDS TREATED PREVIOUSLY WITH Pursuit SHALL BE ASSUMED BY THE USER. Stunting and maturity delay or other adverse effects may result when sweet corn or popcorn are planted following Pursuit use. Cotton • Rotational Interval following Pursuit Application to Alfalfa or Clover Grown for Seed These guidelines DO NOT apply to Pursuit applications made to alfalfa or clover grown for hay or forage (use the 18-month rotational interval). • North Carolina, South Carolina, and Virginia ONLY- Cotton may be planted nine and one-half months after an application of Pursuit if ALL of the following criteria are met:

• Pursuit is applied to peanuts only.
• Soil texture is sandy loam or loamy sand only.
• Greater than 16 inches of rainfall and/or irrigation is received following application of Pursuit through October of the application year. Edible Legumes After Pursuit is applied at no more than 3 fl ozs/A to edible legumes in the use areas described, the following rotational intervals apply: • Chickpea, lentil, peas - plant anytime • Snap bean - 3 months • Barley - 4 months Snap Bean When applied at no more than 1.5 fl ozs/A to snap beans in the use areas defined on this label, snap beans may be replanted at anytime after application of Pursuit. Wheat In areas east of Interstate Highway I-35, wheat may be planted 3 months following Pursuit application. Non-Clearfield® Wheat in North Dakota R+I = Rainfall and overhead irrigation from the time of Pursuit application up until time of wheat planting. Does not include furrow or flood irrigation. If the rainfall or pH requirements are not fully met, and non-Clearfield wheat is planted before the specified rota- tion interval, injury may be reduced by tillage, such as deep disking (greater than 6-inches deep) after crop harvest but before November 1. The possibility of injury to non-Clearfield wheat planted the next season increases if less than normal precipitation occurs within the first two months after Pursuit application. Irrigation and/or Precipitation Requirements Rotation Interval (months) less than 3 acre-feet (36 inches) of water 40 3 acre-feet (36 inches) of water or more 18 Rotational Interval based on pH, Moisture, and Tillage Moldboard Plowing NO YES pH and Rainfall Requirements

10 inches R+I AND pH >6.2 4 months 4 months <10 inches R+I OR pH <6.2 15 months 4 months 25

Edible Bean User/Grower THIS PRODUCT WHEN USED ON EDIBLE LEGUME CROPS MAY LEAD TO CROP INJURY, LOSS, OR DAM- AGE. BASF RECOMMENDS THAT THE USER AND/OR GROWER TEST THE PRODUCT IN ORDER TO DETER- MINE ITS SUITABILITY FOR SUCH INTENDED USE. BASF MAKES THIS PRODUCT AVAILABLE TO THE USER AND/OR GROWER SOLELY TO THE EXTENT THE BENE- FIT AND UTILITY, IN THE SOLE OPINION OF THE USER AND/OR GROWER, OUTWEIGH THE EXTENT OF POTEN- TIAL INJURY ASSOCIATED WITH THE USE OF THIS PRODUCT. THE DECISION TO USE OR NOT TO USE THIS HERBICIDE MUST BE MADE BY EACH INDIVIDUAL Pursuit ® herbicide USER AND/OR GROWER ON THE BASIS OF POSSIBLE CROP INJURY FROM Pursuit, THE SEVERITY OF WEED INFESTATION, THE COST OF ALTERNATIVE WEED CONTROLS, AND OTHER FAC- TORS. BASF INTENDS THAT BECAUSE OF THE RISK OF FAILURE TO PERFORM OR CROP DAMAGE THAT ALL SUCH USE IS AT THE USER'S AND/OR GROWER'S RISK. BASF DISCLAIMS ANY LIABILITY FOR CLAIMS, CAUSES OF ACTION, FINES, PENALTIES, DAMAGES, INCLUDING CONSEQUENTIAL INCIDENTS AND DAMAGES, LOSSES, LIABILITIES, JUDGMENTS, AND EXPENSES ARISING OUT OF OR RELATING TO INJURY TO PERSONS, CROPS, OR PROPERTY RESULTING FROM THE USE OF Pursuit ON EDIBLE LEGUMES CONTRARY TO THE LABEL INSTRUCTIONS. Basagran, Clearfield, Outlook, Poast, Prowl, Pursuit, Scepter, and Zidua are registered trademarks of BASF. Accent, Classic, Finesse, Harmony, and Staple are registered trademarks of E.I. duPont de Nemours & Co., Inc. Authority and Command are registered trademarks of FMC Corporation. Cobra is a registered trademark of Valent Chemical Co. FirstRate, Hornet, and Lorsban are registered trademarks of Dow Agro Sciences LLC. Flexstar and Reflex are registered trademarks of a Syngenta Group Company. Roundup Ready and Roundup Ultra are registered trademarks of Monsanto Agricultural Company. Storm and Ultra Blazer are registered trademarks of United Phosphorus, Inc. © 2015 BASF Corporation All rights reserved. 000241-00310.20150112b.NVA 2014-04-130-0205 Supersedes: NVA 2013-04-130-0350 Supplemental: NVA 2015-04-130-0100 Supplemental: NVA 2013-04-130-0019 BASF Corporation 26 Davis Drive Research Triangle Park, NC 27709 Conditions of Sale and Warranty The Directions For Use of this product reflect the opinion of experts based on field use and tests. The directions are believed to be reliable and must be followed carefully. However, it is impossible to eliminate all risks inherently associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences may result because of such factors as weather conditions, presence of other materials, or use of the product in a manner inconsistent with its labeling, all of which are beyond the control of BASF CORPORATION (“BASF”) or the Seller. To the extent consistent with applicable law, all such risks shall be assumed by the Buyer. BASF warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes referred to in the Directions For Use, subject to the inherent risks, referred to above. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BASF MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS OR MERCHANTABILITY OR ANY OTHER EXPRESS OR IMPLIED WARRANTY. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BUYER’S EXCLUSIVE REMEDY AND BASF’S EXCLUSIVE LIABILITY, WHETHER IN CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY, OR OTHERWISE, SHALL BE LIMITED TO REPAYMENT OF THE PURCHASE PRICE OF THE PRODUCT. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BASF AND THE SELLER DISCLAIM ANY LIABILITY FOR CONSEQUENTIAL, EXEMPLARY, SPECIAL OR INDIRECT DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT. BASF and the Seller offer this product, and the Buyer and User accept it, subject to the foregoing Conditions of Sale and Warranty which may be varied only by agreement in writing signed by a duly authorized representative of BASF. 1108 26

BASF Corporation 26 Davis Drive, Research Triangle Park, NC 27709

Supplemental Label For use on edamame This supplemental label expires December 31, 2018, and must not be used or distributed after this date. Active Ingredient: ammonium salt of imazethapyr: (+)-2-[4,5-dihydro-4-methyl-4-(1-methylethyl)- 5-oxo-1H-imidazol-2-yl]-5-ethyl-3-pyridinecarboxylic acid* .............................................................................. 22.87% Other Ingredients: ........................................................................................................................................... 77.13% Total: ............................................................................................................................................................... 100.00%

• Equivalent to 21.6% (+)-2-[4,5-dihydro-4-methyl-4-(1-methylethyl)-5-oxo-1H-imidazol-2-yl]-5-ethyl-3-pyridinecarboxylic acid 1 gallon contains 2.0 pounds of active ingredient as the free acid.

EPA Reg. No. 241-310 CAUTION/PRECAUCIÓN

Directions For Use • It is a violation of federal law to use this product in a manner inconsistent with its labeling. • The supplemental labeling and the entire Pursuit® herbicide container label, EPA Reg. No. 241-310, must be in possession of the user at the time of application. • Read the label affixed to the container for Pursuit before applying. • Use of Pursuit according to this labeling is subject to the use precautions and limitations imposed by the label affixed to the container for Pursuit. Edamame (Vegetable Soybean) Application Instructions Pursuit use on edamame may lead to crop injury or loss. Users or growers should evaluate Pursuit for crop response on the varieties being grown to determine if Pursuit use is acceptable. Preplant, Preemergence, or Early Postemergence. Apply 4 fl ozs/A of Pursuit (0.063 lb ae/A of imazethapyr) to actively growing crop and weeds. Base application timing on weed size and crop growth stage. When applying Pursuit early postemergence, apply Pursuit between the first and third trifoliate stage when weeds are less than 3-inches tall. Nonionic surfactant (NIS) containing at least 80% active ingredient should be used at 1 quart per 100 gallons of spray solution.

Crop-specific Restrictions

• DO NOT make more than one application of Pursuit per year.

• Replanting - If replanting is necessary in a field previously treated with Pursuit, the field may be replanted to edamame. Rework the soil no deeper than 2 inches. DO NOT apply a second treatment of Pursuit.

• Rotational Crop Restrictions - Edamame may be planted anytime after applying the specified rate of Pursuit for a labeled use.

• Not for use in California.

Weeds Controlled For weeds controlled or suppressed in edamame, refer to the Weeds Controlled table in SOYBEANS in the CROPS section of the Pursuit container label. Group 2 Herbicide

2 Conditions of Sale and Warranty The Directions For Use of this product reflect the opinion of experts based on field use and tests. The directions are believed to be reliable and must be followed carefully. However, it is impossible to eliminate all risks inherently associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences may result because of such factors as weather conditions, presence of other materials, or use of the product in a manner inconsistent with its labeling, all of which are beyond the control of BASF CORPORATION (“BASF”) or the Seller. To the extent consistent with applicable law, all such risks shall be assumed by the Buyer. BASF warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes referred to in the Directions For Use, subject to the inherent risks, referred to above. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BASF MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS OR MERCHANTABILITY OR ANY OTHER EXPRESS OR IMPLIED WARRANTY. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BUYER’S EXCLUSIVE REMEDY AND BASF’S EXCLUSIVE LIABILITY, WHETHER IN CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY, OR OTHERWISE, SHALL BE LIMITED TO REPAYMENT OF THE PURCHASE PRICE OF THE PRODUCT. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BASF AND THE SELLER DISCLAIM ANY LIABILITY FOR CONSEQUENTIAL, EXEMPLARY, SPECIAL OR INDIRECT DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT. BASF and the Seller offer this product, and the Buyer and User accept it, subject to the foregoing Conditions of Sale and Warranty which may be varied only by agreement in writing signed by a duly authorized representative of BASF. 1108

Pursuit is a registered trademark of BASF.

© 2015 BASF Corporation All rights reserved.

000241-00310.20150709b.NVA 2015-04-130-0100 Based on: NVA 2014-04-130-0205

BASF Corporation 26 Davis Drive Research Triangle Park, NC 27709

09/29/2015 241-310