crop-chem-docs/corpus/epa_ppls/264-849.md

ABSOLUTE 500 SC FUNGICIDE

• EPA Reg No: 264-849
• Registrant: BAYER CROPSCIENCE, LLC
• Signal word: Caution
• Active ingredients: Tebuconazole (22.63%); Trifloxystrobin (22.63%)
• Label accepted: 2025-12-12
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000264-00849-20251212.pdf

---

December 12, 2025 SENT BY EMAIL Daljit Singh daljit.singh@bayer.com BAYER CROPSCIENCE LLC Subject: Labeling Notification per Pesticide Registration Notice (PRN) 98-10 - minor label corrections Product Name: ABSOLUTE 500 SC FUNGICIDE Admin Number: 264-849 EPA Receipt Date: 12/02/2025 Action Case Number: 00677689 Dear Daljit Singh: The U.S. Environmental Protection Agency is in receipt of your application for notification under Pesticide Registration Notice 98-10 for the above referenced product. The EPA has conducted a review of this request for its applicability under PRN 98-10 and finds that the action requested falls within the scope of PRN 98-10. The labeling submitted with this application has been stamped "Notification" and will be placed in our records. Should you wish to add/retain a reference to your company’s website on your label, then please be aware that the website becomes labeling under the Federal Insecticide, Fungicide, and Rodenticide Act and is subject to review by the EPA. If the website is false or misleading, the product will be considered to be misbranded and sale or distribution of the product is unlawful under FIFRA section 12(a)(1)(E). 40 CFR § 156.10(a)(5) lists examples of statements the EPA may consider false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims made on the website may not substantially differ from those claims approved through the registration process. Therefore, should the EPA find or if it is brought to our attention that a website contains statements or claims substantially differing from statements or claims made in connection with obtaining a FIFRA section 3 registration, the website will be referred to the EPA’s Office of Enforcement and Compliance Assurance. If you have questions, please contact Elisha Graham via email at graham.elisha@epa.gov. Sincerely, Stephanie Suarez, Ph.D., Acting Product Manager 22 FB, RD Office of Pesticide Programs

1 TEBUCONAZOLE GROUP 3 FUNGICIDE TRIFLOXYSTROBIN GROUP 11 FUNGICIDE ABSOLUTE® 500 SC Fungicide ABN: Absolute® Maxx, Adament® Flow For control of certain diseases on almonds, barley, corn, grapes, grasses grown for seed, peanut, pecan, pistachio, pome fruit, soybean, stone fruit, sweet corn, wheat, and tree nuts. ACTIVE INGREDIENTS: Tebuconazole .................................................................................................................................................................................22.63% Trifloxystrobin..................................................................................................................................................................................22.63% OTHER INGREDIENTS:.................................................................................................................................................................. 54.74% TOTAL: 100.00% Contains 2.18 pounds tebuconazole and 2.18 pounds Trifloxystrobin per gallon. EPA Reg. No. 264-849 EPA Est. No. KEEP OUT OF REACH OF CHILDREN CAUTION PRECAUCIÓN Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand the label, find someone to explain it to you in detail.) For MEDICAL And TRANSPORTATION Emergencies ONLY Call 24 Hours A Day 1-800-334-7577 For PRODUCT USE Information Call 1-866-99BAYER (1-866-992-2937) Please refer to [back panel] [booklet] for additional precautionary statements and directions for use. [Note to reviewer: Location of additional precautionary statements and directions for use will vary between those listed, depending on container type/size.] FIRST AID IF SWALLOWED:  Call a poison control center or doctor immediately for treatment advice.  DO NOT induce vomiting unless told to do so by a poison control center or doctor.  Have person sip a glass of water if able to swallow.  DO NOT give anything to an unconscious person. IF ON SKIN:  Take off contaminated clothing.  Rinse skin immediately with plenty of water for 15-20 minutes.  Call a poison control center or doctor for treatment advice. IF INHALED:  Move person to fresh air.  If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth-to-mouth if possible.  Call a poison control center or doctor for further treatment advice. IF IN EYES:  Hold eye open and rinse slowly and gently with water for 15-20 minutes.  Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye.  Call a poison control center or doctor for treatment advice. In case of emergency call toll free the Bayer CropScience Emergency Response Telephone No. 1-800-334-7577. Have a product container or label with you when calling a poison control center or doctor, or going for treatment. NOTE TO PHYSICIAN: No specific antidote. Treat Symptomatically. 264-849 12/12/2025

2 PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS AND DOMESTIC ANIMALS CAUTION Harmful if swallowed, inhaled or absorbed through skin. Avoid contact with skin, eyes, and clothing. Avoid breathing vapor or spray mist. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco, or using the toilet. Remove and wash contaminated clothing before reuse. Personal Protective Equipment (PPE) Applicators and other handlers must wear:  Long-sleeved shirt and long pants  Shoes plus socks  Chemical-resistant gloves made of any waterproof material ENGINEERING CONTROL STATEMENTS When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS. User Safety Recommendations Users should:  Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.  Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing. USER SAFETY REQUIREMENTS Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry. ENVIRONMENTAL HAZARDS This pesticide is toxic to mammals, birds, fish, and terrestrial and aquatic invertebrates including shrimp. Drift and runoff may be hazardous to aquatic organisms in water adjacent to treated areas. Applying this product when rain is not predicted for the next 24 hours will help reduce potential risk to aquatic invertebrates by reducing pesticide runoff from the treatment area into water bodies. DO NOT apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark. Drift and runoff may be hazardous to aquatic organisms in water adjacent to treated areas. DO NOT contaminate water when disposing of equipment washwater or rinsate. Ground Water Advisory Several trifloxystrobin degradates have properties and characteristics associated with chemicals detected in ground water. The use of this chemical in areas where soils are permeable, particularly where the water table is shallow, may result in ground water contamination. Tebuconazole is known to leach through soil into ground water under certain conditions as a result of label use. Use of this chemical in areas where soils are permeable, particularly where the water table is shallow, may result in ground-water contamination. Surface Water Advisory This product may impact surface water quality due to runoff of rain water. This is especially true for poorly draining soils and soils with shallow ground water. This product is classified as having high potential for reaching surface water via runoff for several months or more after application. A level, well maintained vegetative buffer strip between areas to which this product is applied and surface water features such as ponds, streams, and springs will reduce the potential loading of tebuconazole from runoff water and sediment. Runoff of this product will be reduced by avoiding applications when rainfall is forecasted within 48 hours.

3 DIRECTIONS FOR USE It is a violation of federal law to use this product in a manner inconsistent with its labeling. DO NOT use this product until you have read the entire label. DO NOT apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation. AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. DO NOT enter or allow worker entry into treated areas during the restricted-entry interval (REI). The REI for each crop is listed in the application directions associated with each crop. PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water is:  Coveralls over long-sleeved shirt and long pants  Chemical-resistant gloves made of any waterproof material  Shoes plus socks INFORMATION ABSOLUTE® 500 SC Fungicide is a broad spectrum fungicide for the control of certain diseases of almonds, barley, corn, grapes, grasses grown for seed, peanut, pecan, pistachio, pome fruit, soybean, stone fruit, sweet corn, wheat, and tree nuts. ABSOLUTE 500 SC Fungicide works by interfering with both energy and cell membrane production by plant pathogenic fungi. UNDER CERTAIN CONDITIONS CONDUCIVE TO EXTENDED INFECTION PERIODS, ADDITIONAL FUNGICIDE APPLICATIONS BEYOND THE NUMBER ALLOWED BY THIS LABEL MAY BE NEEDED. UNDER THESE CONDITIONS, USE ANOTHER FUNGICIDE REGISTERED FOR THE CROP/DISEASE.

4 FUNGICIDE RESISTANCE MANAGEMENT (FRAC) For resistance management, please note that ABSOLUTE 500 SC Fungicide contains both a Group 3 and Group 11 fungicide. Any fungal population may contain individuals naturally resistant to ABSOLUTE 500 SC Fungicide and other Group 3 or Group 11 fungicides. A gradual or total loss of pest control may occur over time if these (fungicides) are used repeatedly in the same fields. Appropriate resistance-management strategies should be followed. To delay fungicide resistance, take one or more of the following steps:  Rotate the use of ABSOLUTE 500 SC Fungicide or other Group 3 or Group 11 fungicides within a growing season sequence with different groups that control the same pathogens.  Use tank mixtures with fungicide from a different group that are equally effective on the target pest when such use is permitted. Use at least the minimum application rate as labeled by the manufacturer.  Adopt an integrated disease management program for fungicide use that includes scouting, uses historical information related to pesticide use, and crop rotation, and which considers host plant resistance, impact of environmental conditions on disease development, disease thresholds, as well as cultural, biological and other chemical control practices.  Where possible, make use of predictive disease models to effectively time fungicide applications. Note that using predictive models alone is not sufficient to manage resistance.  Monitor treated fungal/bacterial populations for resistance development.  Contact your local extension specialist or certified crop advisor for any additional pesticide resistance-management and/or IPM recommendations for specific crops and pathogens.  For further information or to report suspected resistance contact Bayer CropScience at 1-866-99BAYER (1-866-992-2937). You can also contact your pesticide distributor or university extension specialist to report resistance. SPRAY EQUIPMENT Thorough coverage is necessary to provide good disease control. Applications using sufficient water volume to provide thorough and uniform coverage generally provide the most effective disease control. For ground application equipment, a minimum of 10 gal/A is advised. For aerial application equipment, a minimum of 2 gal/A is advised. Observe the following restrictions when spraying in the vicinity of aquatic areas including lakes, reservoirs, permanent streams, marshes or natural ponds, and estuaries: DO NOT apply by ground or air within 100 feet of aquatic areas listed above. Maintain a 10-foot wide non-cultivated vegetative strip to prevent movements into bodies of water. In fields adjacent to aquatic areas, when application(s) exceed(s) a combined rate of 1.0 lb Tebuconazole per acre in a 12-month period, DO NOT apply in the following 12 months. Additional required restrictions for specific crops are included in the application instructions for each crop. Broadcast Ground Sprayers Equip sprayers with nozzles that provide accurate and uniform application. Be certain that nozzles are the same size and uniformly spaced across the boom. Calibrate the sprayer before use. Use a pump with the capacity to: (1) maintain a minimum of 35 psi at nozzles, and (2) provide sufficient agitation in the tank to keep the mixture in suspension – this requires recirculation of 10% of the tank volume per minute. Use jet agitators or a liquid sparge tube for vigorous agitation. Use screens to protect the pump and to prevent nozzles from clogging. Screens placed on the suction side of the pump must be 16- mesh or coarser. DO NOT place a screen in the recirculation line. Use 50-mesh screens at the nozzles. Check nozzle manufacturer’s guidance. For information on spray equipment and calibration, consult sprayer manufacturer’s and/or state guidance. For specific local directions and spray schedules, consult the current state agricultural experiment station guidance. AERIAL APPLICATION Avoid application under conditions when uniform coverage cannot be obtained or when excessive spray drift may occur. DO NOT apply directly to humans or animals. Not registered for aerial application in New York State. CHEMIGATION Application Through Irrigation Systems (Chemigation) – Apply ABSOLUTE 500 SC Fungicide through irrigation equipment only to crops for which chemigation is specified on this label. ABSOLUTE 500 SC Fungicide alone or in combination with other pesticides which are registered for application through irrigation systems, may be applied through irrigation systems. Apply this product only through center pivot, solid set, hand move, or moving wheel irrigation systems. DO NOT apply this product through any other type of irrigation system. Illegal pesticide residues in the crop can result from non-uniform distribution of treated water. If you have questions about calibration, you should contact State Extension Service specialists, equipment manufacturers, or other experts. DO NOT connect an irrigation system (including greenhouse systems) used for pesticide application to a public water system, unless the pesticide label-prescribed safety devices for public water systems are

5 in place. A person knowledgeable of the chemigation system and responsible for its operation, or under the supervision of the responsible person, shall shut the system down and make necessary adjustments should the need arise. Operating Instructions

1. The system must contain a functional check-valve, vacuum relief valve, and low pressure drain appropriately located on the irrigation pipeline to prevent water-source contamination from backflow.
2. The pesticide injection pipeline must contain a functional, automatic, quick-closing check-valve to prevent the flow of fluid back toward the injection pump.
3. The pesticide injection pipeline must also contain a functional, normally closed, solenoid-operated valve located on the intake side of the injection pump and connected to the system interlock to prevent fluid from being withdrawn from the supply tank when the irrigation system is either automatically or manually shut down.
4. The system must contain functional interlocking controls to automatically shut off the pesticide injection pump when the water pump motor stops.
5. The irrigation line or water pump must include a functional pressure switch which will stop the water pump motor when the water pressure decreases to the point where pesticide distribution is adversely affected.
6. Systems must use a metering pump, such as a positive displacement injection pump (e.g., diaphragm pump), effectively designed and constructed of materials that are compatible with pesticides and capable of being fitted with a system interlock.
7. DO NOT apply when wind speed favors drift beyond the area intended. Center Pivot Irrigation Equipment Notes: (1) Use only with drive systems which provide uniform water distribution. (2) DO NOT use end guns when chemigating ABSOLUTE 500 SC Fungicide through center pivot systems because of non-uniform application. Determine the size of the area to be treated. Determine the time required to apply 1/8-1/2 inch of water over the area to be treated when the system and injection equipment are operated at normal pressures as specified by the equipment manufacturer. When applying ABSOLUTE 500 SC Fungicide through irrigation equipment use the lowest obtainable water volume while maintaining uniform distribution. Run the system at 80-95% of the manufacturer’s rated capacity. Using water, determine the injection pump output when operated at normal line pressure. Determine the amount of ABSOLUTE 500 SC Fungicide required to treat the area covered by the irrigation system. Add the required amount of ABSOLUTE 500 SC Fungicide and sufficient water to meet the injection time requirements to the solution tank. Make sure the system is fully charged with water before starting injection of the ABSOLUTE 500 SC Fungicide solution. Time the injection to last at least as long as it takes to bring the system to full pressure. Maintain constant solution tank agitation during the injection period. Continue to operate the system until the ABSOLUTE 500 SC Fungicide solution has cleared the sprinkler head. Solid Set, Hand Move, and Moving Wheel Irrigation Equipment When applying ABSOLUTE 500 SC Fungicide through irrigation equipment use the lowest obtainable water volume while maintaining uniform distribution. Determine the amount of ABSOLUTE 500 SC Fungicide required to treat the area covered by the irrigation system. Add the required amount of ABSOLUTE 500 SC Fungicide into the same quantity of water used to calibrate the injection period. Operate the system at the same pressure and time interval established during the calibration. Stop injection equipment after treatment is completed. Continue to operate the system until the ABSOLUTE 500 SC Fungicide solution has cleared the last sprinkler head. MIXING PROCEDURES It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. Shake well or mix product thoroughly before use. Prepare no more spray mixture than is needed for the immediate operation. Thoroughly clean spray equipment before using this product. Vigorous agitation is necessary for proper dispersal of the product. Maintain maximum agitation throughout the spraying operation. DO NOT let the spray mixture stand overnight in the spray tank. Flush the spray equipment thoroughly following each use and apply the rinsate to a previously treated area. ABSOLUTE 500 SC Fungicide Alone: Add approximately 1/2 of the required amount of water to the mix tank. With the agitator running, add the ABSOLUTE 500 SC Fungicide to the tank. Continue agitation while adding the remainder of the water. Begin application of the solution after the ABSOLUTE has completely and uniformly dispersed into the mix water. Maintain agitation until all of the mixture has been applied. ABSOLUTE 500 SC Fungicide + Tank Mix Partners: Add approximately 1/2 of the required amount of water to the mix tank. Start the agitator running before adding any tank-mix partners. In general, tank-mix partners must be added in this order: products packaged in watersoluble packaging*, wettable powders, wettable granules (dry flowables), liquid flowables such as ABSOLUTE, liquids, and emulsifiable concentrates. Always allow each tank-mix partner to become fully and uniformly dispersed before adding the next product. Provide sufficient agitation while adding the remainder of the water. Maintain agitation until all of the mixture has been applied.

• Note: When using ABSOLUTE 500 SC Fungicide in tank mixtures, all products in water-soluble packaging must be added to the tank before any other tank-mix partner, including ABSOLUTE 500 SC. Allow the water-soluble packaging to completely dissolve and the product(s) to completely disperse before adding any other tank-mix partner to the tank. If using ABSOLUTE 500 SC Fungicide in a tank mixture, observe all directions for use, crop/sites, use rates, dilution ratios, precautions, and limitations which appear on the tank-mix partner product label. No label dosage rate must be exceeded, and the most restrictive label precautions and limitations must be

6 followed. This product must not be mixed with any product which prohibits such mixing. Tank mixtures or other applications of products referenced on this label are permitted only in those states in which the referenced products are registered. ABSOLUTE 500 SC Fungicide is compatible with most insecticide, fungicide, and foliar nutrient products. However, the physical compatibility of ABSOLUTE 500 SC Fungicide with tank-mix partners must be tested before use. To determine the physical compatibility of ABSOLUTE 500 SC Fungicide with other products, use a jar test, as described below. Using a quart jar, add the proportionate amounts of the products to 1 qt. of water. Add wettable powders and water-dispersible granular products first, then liquid flowables, and emulsifiable concentrates last. After thoroughly mixing, let stand for at least 5 minutes. If the combination remains mixed or can be remixed readily, it is physically compatible. Once compatibility has been proven, use the same procedure for adding required ingredients to the spray tank. The crop safety of all potential tank mixes including additives and other pesticides on all crops has not been tested. Before applying any tank mixture not specifically directed on this label, the safety to the target crop should be confirmed. To test for crop safety, apply ABSOLUTE 500 SC Fungicide to the target crop in a small area and in accordance with label instructions for the target crop. MANDATORY SPRAY DRIFT MANAGEMENT Aerial Applications  For aerial applications, DO NOT apply when wind speeds exceed 15 mph at the application site. If the wind speed is greater than 10 mph, the boom length must be 65% or less of the wingspan for fixed wing aircraft and 75% or less of the rotor diameter for helicopters. Otherwise, the boom length must be 75% or less of the wingspan for fixed-wing aircraft and 90% or less of the rotor diameter for helicopters.  DO NOT release spray at a height greater than 10 ft above the ground or vegetative canopy, unless a greater application height is necessary for pilot safety.  Applicators must use ½ swath displacement upwind at the downwind edge of the field.  DO NOT apply during temperature inversions. Airblast Applications  Sprays must be directed into the canopy.  DO NOT apply when wind speeds exceed 15 miles per hour at the application site.  User must tum off outward pointing nozzles at row ends and when spraying outer row.  DO NOT apply during temperature inversions Ground Boom Applications  Apply with the nozzle height recommended by the manufacturer, but no more than 4 feet above the ground or crop canopy.  Applicators are required to use a medium or coarser droplet size (ASAE S572.3).  DO NOT apply when wind speeds exceed 15 miles per hour at the application site.  DO NOT apply during temperature inversions. SPRAY DRIFT ADVISORIES THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS. IMPORTANCE OF DROPLET SIZE An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide target pest control. While applying larger droplets will reduce spray drift, the potential for drift will be greater if applications are made improperly or under unfavorable environmental conditions. Controlling Droplet Size -Ground Boom  Volume - Increasing the spray volume so that larger droplets are produced will reduce spray drift. Use the highest practical spray volume for the application. If a greater spray volume is needed, consider using a nozzle with a higher flow rate.  Pressure - Use the lowest spray pressure recommended for the nozzle to produce the target spray volume and droplet size.  Spray Nozzle - Use a spray nozzle that is designed for the intended application. Consider using nozzles designed to reduce drift. Controlling Droplet Size – Aircraft Adjust Nozzles - Follow nozzle manufacturers recommendations for setting up nozzles. Generally, to reduce fine droplets, nozzles should be oriented parallel with the airflow in flight. BOOM HEIGHT - Ground Boom For ground equipment, the boom should remain level with the crop and have minimal bounce. RELEASE HEIGHT – Aircraft Higher release heights increase the potential for spray drift. SHIELDED SPRAYERS Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify that the shields are not interfering with the uniform deposition of the spray on the target area.

7 TEMPERATURE AND HUMIDITY When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation. TEMPERATURE INVERSIONS Drift potential is high during a temperature inversion. Temperature inversions are characterized by increasing temperature with altitude and are common on nights with limited cloud cover and light to no wind. The presence of an inversion can be indicated by ground fog or by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing. Avoid applications during temperature inversions. WIND Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND CONDITIONS. Applicators need to be familiar with local wind patterns and terrain that could affect spray drift. Handheld Technology Applications: Take precautions to minimize spray drift. USE DIRECTIONS FOR SPECIFIC CROPS ALMONDS Disease Control Rate (fl oz / Acre) Application Instructions Brown Rot Blossom Blight (Monilinia laxa, M. fructicola) Jacket Rot, Green Fruit Rot (Botrytis cinerea) Alternaria (Alternaria alternata) Anthracnose (Colletotrichum acutatum) Shot Hole (Wilsonomyces carpophilus) Powdery Mildew (Podosphaera tridactyla, Sphaerotheca pannosa) Scab (Cladosporium carpophilum) Rust (Tranzschelia discolor) 3.7 to 7.3 (0.063 – 0.124 lb/A tebuconazole) (0.063 – 0.124 lb/A trifloxystrobin) Begin applications when conditions are favorable for disease but before infection. Apply on a 7- to 14-day spray schedule. Use higher rates and shorter intervals when disease pressure is severe. Refer to University and/or extension guidelines for best application timings. Restrictions  DO NOT apply more than 29.2 fl oz (0.497 lb/A tebuconazole and 0.497 lb/A trifloxystrobin) of ABSOLUTE 500 SC FUNGICIDE per acre per year.  DO NOT make more than 4 total applications of ABSOLUTE 500 SC FUNGICIDE per year.  DO NOT apply ABSOLUTE 500 SC FUNGICIDE within 35 days of harvest.  DO NOT cut cover crops in treated areas for feed, or allow livestock to graze treated areas.  ABSOLUTE 500 SC FUNGICIDE is a mixture of a Group 11 and a Group 3 fungicide. To limit the potential for the development of resistance, DO NOT apply more than 2 sequential applications of ABSOLUTE 500 SC FUNGICIDE or other Group 11-containing fungicides.  Restricted-entry interval (REI) = 12 hours.  Minimum Retreatment interval (RTI) = 7 days.

8 BARLEY Disease Control Rate (fl oz / Acre) Application Instructions Glume Blotch (Stagonospora nodorum) Leaf Blotch (Stagonospora avenae) Net Blotch (Pyrenophora teres) Powdery Mildew (Blumeria graminis) Rusts (Puccinia spp.) Scald (Rhynchosporium secalis) Spot Blotch (Cochliobolus sativus) 3.3 (0.056 lb/A tebuconazole) (0.056 lb/A trifloxystrobin) Begin applications preventatively when conditions are favorable for disease development. ABSOLUTE 500 SC Fungicide may be applied by ground, aerial or chemigation. Restrictions  DO NOT apply more than 3.3 fl oz (0.056 lb/A tebuconazole and 0.056 lb/A trifloxystrobin) of ABSOLUTE 500 SC Fungicide per year.  DO NOT apply within 40 days of harvest.  For optimum disease control, the lowest labeled rate of a spray non-ionic surfactant (NIS) may be tank-mixed.  For resistance management, DO NOT apply more than 2 consecutive applications of a Group 11 or Group 11-containing fungicide per acre per year without alternation with at least 2 applications of fungicide from a different (not Group 11) mode of action.  DO NOT allow livestock to graze within the treated area within 30 days after application, and DO NOT harvest the treated crop for forage within 30 days after application or for hay within 45 days after application.  Restricted-entry interval (REI) = 12 hours. Not registered for use on Barley in California.

9 CORN Field Corn, Field Corn Grown For Seed And Popcorn Disease Control Rate (fl oz / Acre) Application Instructions Anthracnose Leaf Blight (Colletotrichum graminicola) Common Rust (Puccinia sorghi) Eye Spot (Aureobasidium zeae) Gray Leaf Spot (Cercospora zeae-maydis) Northern Corn Leaf Blight (Setopshaeria turcica) Northern Corn Leaf Spot (Cochliobolus carbonum) Southern Corn Leaf Blight (Cochliobolus heterostrophus) Southern Rust (Puccinia polysora) 5.0 - 6.0 (0.085 - 0.102 lb/A tebuconazole) (0.085 - 0.102 lb/A trifloxystrobin) Apply when disease first appears and continue on a 10-14 day interval if favorable conditions for disease development persist. Use of shorter spray intervals and higher rates are advised when disease pressure is severe. ABSOLUTE 500 SC Fungicide may be applied by ground, air or chemigation. ABSOLUTE 500 SC Fungicide must be applied in a minimum of 10 gallons of spray solution by ground sprayer or in a minimum of 2 gallons per acre by aircraft spray equipment. For optimum disease control, the lowest labeled rate of a spray surfactant may be tank-mixed. Restrictions  DO NOT apply more than 12 fl oz (0.204 lb/A tebuconazole and 0.204 lb/A trifloxystrobin) of ABSOLUTE 500 SC Fungicide per acre per year.  DO NOT apply more than 2 applications per year.  ABSOLUTE 500 SC Fungicide may be applied up to 36 days before the harvest of grain and fodder.  DO NOT apply within 21 days of harvest for forage.  DO NOT apply more than two sequential applications of ABSOLUTE 500 SC Fungicide.  Limit the number of ABSOLUTE 500 SC Fungicide or other Group 11-containing fungicide applications to no more than two per acre per crop.  Restricted-entry interval (REI) = 12 hours.  Minimum Retreatment interval (RTI) = 10 days. Not registered for use on Corn in California.

10 GRAPES Disease Control Rate (fl oz / Acre) Application Instructions Powdery Mildew (Uncinula necator) 2.8 (0.048 lb/A tebuconazole) (0.048 lb/A trifloxystrobin) Begin applications when conditions are favorable for disease but before infection. Apply on a 14-day spray schedule. 3.7 (0.063 lb/A tebuconazole) (0.063 lb/A trifloxystrobin) Begin applications when conditions are favorable for disease but before infection. Apply on a 21-day spray schedule. Botrytis Bunch Rot (Botrytis cinerea) 5.5 (0.094 lb/A tebuconazole) (0.094 lb/A trifloxystrobin) Refer to timings listed above for grape powdery mildew. Research data show a trend toward better control if fungicides are applied at bloom, pre-bunch closure, and veraison. Continue on a 14- to 21-day spray schedule. Use shorter intervals when disease pressure is severe. Phomopsis Cane & Leaf Spot (Phomopsis viticola) 5.5 (0.094 lb/A tebuconazole) (0.094 lb/A trifloxystrobin) Begin applications at bud break and continue up to bunch closure on a 14- to 21-day spray schedule. Use shorter intervals when disease pressure is severe. Black Rot (Guignardia bidwellii) 3.7 (0.063 lb/A tebuconazole) (0.063 lb/A trifloxystrobin) Begin applications when conditions are favorable for disease but before infection. Apply on a 10- to 14-day spray schedule. Use shorter intervals when disease pressure is severe. Disease Suppression Rate (fl oz / Acre) Application Instructions Botrytis Bunch Rot (Botrytis cinerea) Phomopsis Cane & Leaf Spot (Phomopsis viticola) 3.7 (0.063 lb/A tebuconazole) (0.063 lb/A trifloxystrobin) Refer to timings listed above for grape powdery mildew. Use shorter intervals when disease pressure is severe. Downy Mildew (Plasmopara viticola) 6.6 (0.112 lb/A tebuconazole) (0.112 lb/A trifloxystrobin) Begin applications when conditions are favorable for disease but before infection. Apply on a 10- to 14-day spray schedule. Use shorter intervals when disease pressure is severe. Restrictions  DO NOT apply more than 39.6 fl oz (0.674 lb/A tebuconazole and 0.674 lb/A trifloxystrobin) of ABSOLUTE 500 SC Fungicide per acre per year.  DO NOT make more than 6 total applications of ABSOLUTE 500 SC Fungicide per year.  DO NOT apply ABSOLUTE 500 SC Fungicide within 14 days of harvest.  ABSOLUTE 500 SC Fungicide is a mixture of a Group 11 and a Group 3 fungicide. To limit the potential for the development of resistance, DO NOT apply more than 2 sequential applications of ABSOLUTE 500 SC Fungicide or other Group 11-containing fungicides.  DO NOT apply Absolute 500 SC Fungicide to Concord Grapes or crop injury may occur.  Restricted-entry interval (REI) = 12 hours.  Minimum Retreatment interval (RTI) = 10 days.

11 GRASSES GROWN FOR SEED Northwest U.S. only Disease Control Rate (fl oz / Acre) Application Instructions Rust (Puccinia spp.) Powdery Mildew (Erysiphe graminis) 5 - 7.7 (0.085 - 0.131 lb/A tebuconazole) (0.085 - 0.131 lb/A trifloxystrobin) Begin applications when rust and powdery mildew infections are noticeable and beginning to increase in number. Continue applications on a 21 day application interval. Continue applications if favorable conditions for disease development persist. Use higher rates when disease pressure is severe. Most bluegrass has little resistance to rust or powdery mildew. It is important to begin applications early in the growing season for bluegrass and other more susceptible species. Apply ABSOLUTE 500 SC Fungicide in a minimum of 20 gallons per acre for ground application, or in a minimum of 10 gallons per acre for aerial application. Restrictions:  DO NOT apply more than 32 fl oz (0.545 lb/A tebuconazole and 0.545 lb/A trifloxystrobin) of ABSOLUTE 500 SC Fungicide per acre per year.  DO NOT apply more than 2 sequential applications of Absolute or other Group 11 containing fungicide without alternation to at least 2 applications of a fungicide from a different (not Group 11) mode of action.  For optimum performance, the lowest specified rate of a spray surfactant containing methylated seed oil, or other equivalent oil based product, must be tank mixed with ABSOLUTE 500 SC.  DO NOT apply within 4 days of harvest.  DO NOT forage or cut green crop for feed purposes. Chaff, screenings, and straw from treated areas may be used for feed purposes, but DO NOT use seed for feed purposes.  Regrowth may be grazed starting 17 days after the last application of ABSOLUTE 500 SC.  Restricted-entry interval (REI) = 12 hours.  Minimum Retreatment interval (RTI) = 21 days. Not registered for use on Grasses Grown for Seed in California.

12 PEANUTS Disease Control Rate (fl oz / Acre) Application Instructions Early Leaf Spot (Cercospora arachidicola) Late Leaf Spot (Cercosporidium personatum) Rust (Puccinia arachidis) Web Blotch (Phoma arachidicola) 3.5 (0.060 lb/A tebuconazole) (0.060 lb/A trifloxystrobin) Begin applications when conditions are favorable for diseases but before infection. Apply on a 10 - 14 day spray schedule. Use the shorter intervals when disease pressure is severe. ABSOLUTE 500 SC Fungicide may be applied by ground, aerial, or chemigation. White mold (Sclerotium rolfsii) 3.5 (0.060 lb/A tebuconazole) (0.060 lb/A trifloxystrobin) + 5.2 fl oz/A Folicur 3.6 F (EPA Reg 264-752) (0.146 lb/A tebuconazole) Folicur tank-mix - Begin applications when conditions are favorable for diseases, typically within timings 3 - 6 in a seven spray program. This Folicur tank-mix, when part of a Folicur four block program, will also provide protection against Rhizoctonia limb rot. ABSOLUTE 500 SC Fungicide may be applied by ground, aerial, or chemigation. Limb Rot (Rhizoctonia solani) 7.0 (0.119 lb/A tebuconazole) (0.119 lb/A trifloxystrobin) Begin applications when conditions are favorable for diseases, typically within timings 3 - 6 in a seven spray program. In the southeast, applications at approximately 90 and 104 days after planting may be the most effective timings for control of limb rot. ABSOLUTE 500 SC Fungicide may be applied by ground, aerial, or chemigation. Restrictions  DO NOT exceed more than 4 total applications of ABSOLUTE 500 SC Fungicide per year.  DO NOT apply ABSOLUTE 500 SC Fungicide within 14 days of harvest.  If 4 or less total fungicide sprays are planned then alternate each application of ABSOLUTE 500 SC Fungicide with a non Group 11 containing fungicide.  If 5 or more fungicide sprays are planned use a maximum of 2 consecutive applications of ABSOLUTE 500 SC Fungicide alternated with at least 2 applications of a non Group 11 containing fungicide before returning to another Group 11 fungicide.  To limit development of disease resistance DO NOT apply a Group 11 containing fungicide for more than ½ of the seasonal sprays.  DO NOT feed hay or threshings or allow livestock to graze in treated area.  Restricted-entry interval (REI) =12 hours.  Minimum Retreatment interval (RTI) = 10 days. Not registered for use on Peanuts in California.

13 PECAN Disease Control Rate (fl oz / Acre) Application Instructions Pecan Scab (Cladosporium caryigenum) Anthracnose (Glomerella cingulata) 5 - 7.67 (0.085 - 0.131 lb/A tebuconazole) (0.085 - 0.131 lb/A trifloxystrobin) Begin applications when conditions are favorable for disease development and continue throughout the season using a 14 - 21 day interval. Absolute will control scab on both the leaf and shuck. A surfactant may be added to the spray solution for optimum control of the indicated diseases. ABSOLUTE 500 SC Fungicide may be applied by ground, aerial, or chemigation. Restrictions:  DO NOT make more than 6 applications of ABSOLUTE 500 SC Fungicide per year.  DO NOT apply more than 46 oz (0.783 lb/A tebuconazole and 0.783 lb/A trifloxystrobin) of ABSOLUTE 500 SC Fungicide per acre per year.  DO NOT cut cover crops in treated areas for feed or allow livestock to graze treated areas.  To limit the potential for resistance to develop apply up to 2 consecutive applications of ABSOLUTE 500 SC Fungicide then make at least 2 applications with an effective fungicide with a different mode of action (a non Group 11) before returning to ABSOLUTE 500 SC Fungicide.  To limit development of disease resistance DO NOT apply a Group 11 containing fungicide for more than ½ of the seasonal sprays.  DO NOT apply after shuck split or within 30 days of harvest.  Restricted-entry interval (REI) = 12 hours.  Minimum Retreatment interval (RTI) = 14 days. Not registered for use on Pecan in California. PISTACHIOS Disease Control Rate (fl oz / Acre) Application Instructions Blossom & Shoot Blight (Botrytis cinerea) Alternaria Late Blight (Alternaria alternata) 3.7 to 7.3 (0.063 - 0.124 lb/A tebuconazole) (0.063 - 0.124 lb/A trifloxystrobin) Begin applications when conditions are favorable for disease but before infection. Apply on a 14- to 21-day spray schedule. Use higher rates and shorter intervals when disease pressure is severe. Botryosphaeria Panicle & Shoot Blight (Botryosphaeria dothidea) Septoria Leaf Spot (Septoria pistaciarum) 3.7 to 7.3 (0.063 - 0.124 lb/A tebuconazole) (0.063 - 0.124 lb/A trifloxystrobin) Begin applications when conditions are favorable for disease but before infection. Apply on a 14- to 21-day spray schedule. Use higher rates and shorter intervals when disease pressure is severe. Restrictions  DO NOT apply more than 22 fl oz (0.375 lb/A tebuconazole and 0.375 lb/A trifloxystrobin) of ABSOLUTE 500 SC FUNGICIDE per acre per year.  DO NOT make more than 4 total applications of ABSOLUTE 500 SC FUNGICIDE per year.  DO NOT apply ABSOLUTE 500 SC FUNGICIDE within 35 days of harvest or after hull split.  DO NOT cut cover crops in treated areas for feed, or allow livestock to graze treated areas.  ABSOLUTE 500 SC FUNGICIDE is a mixture of a Group 11 and a Group 3 fungicide. To limit the potential for the development of resistance, DO NOT apply more than 2 sequential applications of ABSOLUTE 500 SC FUNGICIDE or other Group 11- containing fungicides.  Restricted-entry interval (REI) = 12 hours.  Minimum Retreatment interval (RTI) = 14 days.

14 POME FRUITS1 Apples, Pears, Crabapples, Loquat, Mayhaw, Quince Disease Control Rate (fl oz / Acre) Application Instructions Scab (Venturia spp.) Preventive 3.7 (0.063 lb/A tebuconazole) (0.063 lb/A trifloxystrobin) Post-Infection 4.6 (0.078 lb/A tebuconazole) (0.078 lb/A trifloxystrobin) Begin applications at green tip and continue as needed on a 7- to 10-day spray schedule. Use higher rates and shorter intervals when disease pressure is severe. Refer to University and/or extension guidelines for best application timings. Cedar-Apple Rust (Gymnosporangium juniperivirginianae) 3.7 to 4.6 (0.063 - 0.078 lb/A tebuconazole) (0.063 - 0.078 lb/A trifloxystrobin) Begin applications at green tip and continue as needed on a 7- to 10-day spray schedule. Use higher rates and shorter intervals when disease pressure is severe. Powdery Mildew (Podosphaera leucotricha) 3.7 to 4.6 (0.063 - 0.078 lb/A tebuconazole) (0.063 - 0.078 lb/A trifloxystrobin) Begin applications at green tip and continue as needed on a 10- to 14-day spray schedule. Use higher rates and shorter intervals when disease pressure is severe. Sooty Blotch (Gloeodes pomigena) Fly Speck (Schizothyrium pomi) 3.7 to 4.6 (0.063 - 0.078 lb/A tebuconazole) (0.063 - 0.078 lb/A trifloxystrobin) Begin applications when conditions are favorable for disease but before infection. Apply on a 10- to 14-day spray schedule. Use higher rates and shorter intervals when disease pressure is severe. Disease Suppression Rate (fl oz / Acre) Application Instructions Bitter Rot (Glomerella cingulata) 5.5 (0.094 lb/A tebuconazole) (0.094 lb/A trifloxystrobin) White Rot (Botryosphaeria dothidea) Tank mix with CAPTAN: 2.8 (0.048 lb/A tebuconazole) (0.048 lb/A trifloxystrobin) Begin applications when conditions are favorable for disease but before infection. Apply ABSOLUTE 500 SC FUNGICIDE solo at the specified rate or use a tank mix of ABSOLUTE 500 SC FUNGICIDE with 1.2 lbs. active ingredient of Captan per acre. Use higher rates and shorter intervals when disease pressure is severe. Continue applications as needed on a 10- to 14-day spray schedule. Restrictions  DO NOT apply more than 20.2 fl oz (0.344 lb/A tebuconazole and 0.344 lb/A trifloxystrobin) of ABSOLUTE 500 SC FUNGICIDE per acre per year.  DO NOT make more than 4 total applications of ABSOLUTE 500 SC FUNGICIDE per year.  DO NOT apply ABSOLUTE 500 SC FUNGICIDE within 75 days of harvest.  ABSOLUTE 500 SC FUNGICIDE is a mixture of a Group 11 and a Group 3 fungicide. To limit the potential for the development of resistance, DO NOT apply more than 2 sequential applications of ABSOLUTE 500 SC FUNGICIDE or other fungicide containing either a Group 3 or Group 11 fungicide.  Restricted-entry interval (REI) = 12 hours.  Minimum Retreatment interval (RTI) = 7 days. 1Not for use in New York

15 STONE FRUIT Apricot, Cherry, Nectarine, Peach, Plum, Plumcot, Prune [Fresh] Disease Control Rate (fl oz / Acre) Application Instructions Brown Rot Blossom Blight (Monilinia laxa, M. fructicola) Jacket Rot, Green Fruit Rot (Botrytis cinerea) Shot Hole (Wilsonomyces carpophilus) Alternaria (Alternaria alternata) Anthracnose (Colletotrichum acutatum) Powdery Mildew (Podosphaera spp., Sphaerotheca pannosa) Rusty Spot (Podosphaera leucotricha) Scab (Cladosporium carpophilum) Cherry Leaf Spot (Blumeriella jaapii) Fruit Rot (Monilinia fructicola) Rust (Tranzschelia discolor) 3.7 to 7.3 (0.063 - 0.124 lb/A tebuconazole) (0.063 - 0.124 lb/A trifloxystrobin) Begin applications when conditions are favorable for disease but before infection. Apply on a 7- to 14-day spray schedule. Use higher rates and shorter intervals when disease pressure is severe. Refer to University and/or extension guidelines for best application timings. Restrictions  DO NOT apply more than 29.2 fl oz (0.497 lb/A tebuconazole and 0.497 lb/A trifloxystrobin) of ABSOLUTE 500 SC Fungicide per acre per year.  DO NOT make more than 4 total applications of ABSOLUTE 500 SC Fungicide per year.  DO NOT apply ABSOLUTE 500 SC Fungicide within 1 day of harvest.  ABSOLUTE 500 SC Fungicide is a mixture of a Group 11 and a Group 3 fungicide. To limit the potential for the development of resistance, DO NOT apply more than 2 sequential applications of ABSOLUTE 500 SC Fungicide or other Group 11 fungicides.  Restricted-entry interval (REI) = 12 hours.  Minimum Retreatment interval (RTI) = 7 days.

16 SOYBEAN Disease Control Rate (fl oz / Acre) Application Instructions Alternaria Leaf Spot (Alternaria spp.) Anthracnose (Colletotrichum truncatum) Asian Soybean Rust (Phakopsora pachyrhizi) Brown spot (Septoria glycines) Cercospora Blight (Cercospora kikuchii) Frogeye Leaf Spot (Cercospora sojina) Pod and Stem Blight (Diaporthe phaseolorum) Powdery Mildew (Microsphaera diffusa) Rhizoctonia Aerial Blight (Rhizoctonia solani) 5.0 – 6.0 (0.085 - 0.102 lb/A tebuconazole) (0.085 - 0.102 lb/A trifloxystrobin) For diseases other than Asian soybean rust, for best disease control, apply ABSOLUTE 500 SC Fungicide at early flowering or prior to disease development. For Asian soybean rust control, apply ABSOLUTE 500 SC Fungicide as a preventative spray or at first visible symptoms of disease. Repeat applications on a 10 – 21 day spray interval if environmental conditions are favorable for continued disease development. Use of shorter spray intervals and higher rates are advised when disease pressure is severe. ABSOLUTE 500 SC Fungicide must be applied in a minimum of 10 gallons of spray solution by ground sprayer or in a minimum of 2 gallons per acre by aircraft spray equipment. ABSOLUTE 500 SC Fungicide can also be applied by chemigation. Restrictions  DO NOT apply ABSOLUTE 500 SC FUNGICIDE within 21 days of harvest.  DO NOT apply more than 3 applications per year. (i.e. 18 fluid ounces of product which is equivalent to 0.3 lb of either active ingredient).  DO NOT apply more than two sequential applications of ABSOLUTE 500 SC Fungicide.  For optimum disease control, the lowest labeled rate of a spray non-ionic surfactant (NIS) may be tank-mixed.  Limit the number of ABSOLUTE 500 SC Fungicide or other Group 11-containing fungicide application to no more than two per acre per crop.  DO NOT graze or feed soybean forage or hay.  Restricted-entry interval (REI) = 12 hours.  Minimum Retreatment interval (RTI) = 10 days. Not registered for use on Soybean in California.

17 SWEET CORN Including Seed Production Disease Control Rate (fl oz / Acre) Application Instructions Anthracnose Leaf Blight (Colletotrichum graminicola) Common Rust (Puccinia sorghi) Eye Spot (Aureobasidium zeae) Gray Leaf Spot (Cercospora zeae-maydis) Northern Corn Leaf Blight (Setopshaeria turcica) Northern Corn Leaf Spot (Cochliobolus carbonum) Southern Corn Leaf Blight (Cochliobolus heterostrophus) Southern Rust (Puccinia polysora) 5.0 - 6.0 (0.085 - 0.102 lb/A tebuconazole) (0.085 - 0.102 lb/A trifloxystrobin) Apply when disease first appears and continue on a 10-14 day interval if favorable conditions for disease development persist. Use of shorter spray intervals and higher rates are advised when disease pressure is severe. ABSOLUTE 500SC may be applied by ground, air or chemigation. ABSOLUTE 500 SC Fungicide must be applied in a minimum of 10 gallons of spray solution by ground sprayer or in a minimum of 2 gallons per acre by aircraft spray equipment. For optimum disease control, the lowest labeled rate of a spray surfactant may be tank-mixed. Restrictions  DO NOT apply more than 24 fl oz (0.409 lb/A tebuconazole and 0.409 lb/A trifloxystrobin) of ABSOLUTE 500 SC Fungicide per acre per year.  DO NOT apply more than 4 applications per year.  ABSOLUTE 500 SC Fungicide may be applied up to 7 days before the harvest of ears and forage.  DO NOT apply within 49 days of harvest for fodder.  In programs with ABSOLUTE 500 SC Fungicide, with Group 11 tank mixes, or other pre-mixes containing a Group 11 fungicide, the number of Group 11 fungicide must be no more than one-half of the total number of fungicide applications per year.  Alternate every application of ABSOLUTE 500 SC Fungicide with at least one application of a non-Group 11 fungicide.  Restricted-entry interval (REI) = 12 hours.  Minimum Retreatment interval (RTI) = 10 days. Not registered for use on Sweet Corn in California.

18 TREE NUTS Beechnuts, Brazil Nuts, Butternuts, Cashews, Chinquapins, Filberts, Hickory Nuts, Macadamia Nuts, Walnuts (See Specific Use Directions for almonds, pecans, and pistachios) Disease Control Rate (fl oz / Acre) Application Instructions Jacket Rot, Green Fruit Rot, Blossom & Shoot Blight (Botrytis cinerea) Alternaria (Alternaria alternata) Anthracnose (Colletotrichum acutatum, Glomerella cingulata) Shot Hole (Wilsonomyces carpophilus) Powdery Mildew (Podosphaera tridactyla, Sphaerotheca pannosa) Scab (Cladosporium carpophilum, Cladosporium caryigenum) Eastern Filbert Blight (Anisogramma anomala) Rust (Tranzschelia discolor) 3.7 to 7.3 (0.063 - 0.124 lb/A tebuconazole) (0.063 - 0.124 lb/A trifloxystrobin) Begin applications when conditions are favorable for disease but before infection. Apply on a 7- to 14-day spray schedule. Use higher rates and shorter intervals when disease pressure is severe. Refer to University and/or extension guidelines for best application timings. Botryosphaeria Panicle & Shoot Blight (Botryosphaeria dothidea) Septoria Leaf Spot (Septoria pistaciarum) 3.7 to 7.3 (0.063 - 0.124 lb/A tebuconazole) (0.063 - 0.124 lb/A trifloxystrobin) Begin applications when conditions are favorable for disease but before infection. Apply on a 14- to 21-day spray schedule. Use higher rates and shorter intervals when disease pressure is severe. Restrictions  DO NOT apply more than 29.2 fl oz (0.497 lb/A tebuconazole and 0.497 lb/A trifloxystrobin) of ABSOLUTE 500 SC FUNGICIDE per acre per year.  DO NOT make more than 4 total applications of ABSOLUTE 500 SC FUNGICIDE per year.  DO NOT apply ABSOLUTE 500 SC FUNGICIDE within 60 days of harvest or after hull split.  DO NOT cut cover crops in treated areas for feed, or allow livestock to graze treated areas.  ABSOLUTE 500 SC FUNGICIDE is a mixture of a Group 11 and a Group 3 fungicide. To limit the potential for the development of resistance, DO NOT apply more than 2 sequential applications of ABSOLUTE 500 SC FUNGICIDE or other Group 11 - containing fungicides.  Restricted-entry interval (REI) = 12 hours.  Minimum Retreatment interval (RTI) = 7 days.

19 WHEAT Disease Control Rate (fl oz / Acre) Application Instructions Glume Blotch (Stagonospora nodorum) Leaf Blight (Septoria tritici) Powdery Mildew (Blumeria graminis f. sp. tritici) Rusts (Puccinia spp.) Tan Spot (Pyrenophora tritici-repentis) 5.0 (0.085 lb/A tebuconazole) (0.085 lb/A trifloxystrobin) Begin applications preventatively when conditions are favorable for disease development. Early season leaf disease suppression: apply 3 - 4 fl oz per acre of ABSOLUTE 500 SC Fungicide for suppression of Tan Spot, Leaf Blight, and Powdery Mildew. ABSOLUTE 500 SC Fungicide may be applied by ground, aerial or chemigation. Restrictions  DO NOT apply more than 5 fl oz (0.085 lb/A tebuconazole and 0.085 lb/A trifloxystrobin) of ABSOLUTE 500 SC Fungicide per year.  DO NOT apply within 35 days of harvest.  For optimum disease control, the lowest labeled rate of a spray non-ionic surfactant (NIS) may be tank-mixed.  For resistance management, DO NOT apply more than 2 consecutive applications of ABSOLUTE 500 SC Fungicide or other Group 11 or Group 11-containing fungicide per acre per year without alternation with at least 2 applications of fungicide from a different (not Group 11) mode of action.  DO NOT allow livestock to graze within the treated area within 30 days after application, and DO NOT harvest the treated crop for forage within 30 days after application or for hay and wheat straw within 45 days after application.  Restricted-entry interval (REI) = 12 hours Not registered for use on Wheat in California. ROTATIONAL RESTRICTIONS Treated areas may be replanted immediately following last application with barley, corn, grasses grown for seed, peanut, pecan, soybean, and wheat. For other crops, DO NOT plant back within 120 days of harvest.

20 STORAGE AND DISPOSAL DO NOT contaminate water, food, or feed by storage or disposal. Pesticide Storage Store in a cool, dry place and in such a manner as to prevent cross contamination with other pesticides, fertilizers, food, and feed. Store in original container and out of the reach of children, preferably in a locked storage area. Handle and open container in a manner as to prevent spillage. If the container is leaking, invert to prevent leakage. If container is leaking or material spilled for any reason or cause, carefully dam up spilled material to prevent runoff. Refer to Precautionary Statements on label for hazards associated with the handling of this material. DO NOT walk through spilled material. Absorb spilled material with absorbing type compounds and dispose of as directed for pesticides below. In spill or leak incidents, keep unauthorized people away. You may contact the Bayer CropScience Emergency Response Team for decontamination procedures or any other assistance that may be necessary. The Bayer CropScience Emergency Response telephone number is 1-800-334-7577. Pesticide Disposal Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility. Container Handling Rigid non-refillable containers less than 5 gallons. Non-refillable container. DO NOT reuse or refill this container. Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container ¼ full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. Offer for recycling, if available. If not recycled, then puncture and dispose of in a sanitary landfill or by incineration, or, if allowed by State and local authorities, by burning. If burned, stay out of smoke. Rigid Non-refillable containers that are too large to shake (i.e., with capacities greater than 5 gallons or 50 lbs) Non-refillable containers - DO NOT reuse or refill this container. Refer to Bottom Discharge IBC or Top Discharge IBC, Drums, Kegs information as follows. Bottom Discharge IBC (e.g. – Schuetz Caged IBC or Snyder Square Stackable) Pressure rinsing the container before final disposal is the responsibility of the person disposing of the container. To pressure rinse the container before final disposal, empty the remaining contents from the IBC into application equipment or mix tank. Raise the bottom of the IBC by 1.5 inches on the side which is opposite of the bottom discharge valve to promote more complete product removal. Completely remove the top lid of the IBC. Use water pressurized to at least 40 PSI to rinse all interior portions. Continuously pump or drain rinsate into application equipment or rinsate collection system while pressure rinsing. Continue pressure rinsing for 2 minutes or until rinsate becomes clear. Replace the lid and close bottom valve. Top Discharge IBC, Drums, Kegs (e.g.– Snyder 120 Next Gen, Bonar B120, Drums, Kegs). Triple rinsing the container before final disposal is the responsibility of the person disposing of the container. To triple rinse the container before final disposal, empty the remaining contents from this container into application equipment or mix tank. Fill the container at least 10 percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Rinse all interior surfaces. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this procedure two more times. Once container is rinsed, offer for recycling if available or puncture and dispose of in a sanitary landfill or by incineration. Refillable Containers Refillable container – Refer to Bottom Discharge IBC or Top Discharge IBC, Drums, Kegs information as follows. Refill this container with pesticide only. DO NOT reuse this container for any other purpose. Contact your Ag retailer or Bayer CropScience for container return, disposal and recycling information. Bottom Discharge IBC (e.g. – Schuetz Caged IBC or Snyder Square Stackable) Pressure rinsing the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility of the refiller. To pressure rinse the container before final disposal, empty the remaining contents from the IBC into application equipment or mix tank. Raise the bottom of the IBC by 1.5 inches on the side which is opposite of the bottom discharge valve to promote more complete product removal. Completely remove the top lid of the IBC. Use water pressurized to at least 40 PSI to rinse all interior portions. Continuously pump or drain rinsate into application equipment or rinsate collection system while pressure rinsing. Continue pressure rinsing for 2 minutes or until rinsate becomes clear. Replace the lid and close bottom valve. Top Discharge IBC, Drums, Kegs (e.g.– Snyder 120 Next Gen, Bonar B120, Drums, Kegs). Triple rinsing the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility of the refiller. To triple rinse the containers before final disposal, empty the remaining contents from this container into

21 application equipment or mix tank. Fill the container at least 10 percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Rinse all interior surfaces. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this procedure two more times. Once container is rinsed, offer for recycling if available or puncture and dispose of in a sanitary landfill or by incineration. Products in Refillable Containers End users are authorized to remove tamper evident cables as required to remove the product from the container unless the container is equipped with one way valves and refilling or returning is planned. If this is the case, end users are not authorized to remove tamper evident cables, one way valves or clean container.

22 IMPORTANT: READ BEFORE USE Read the entire Directions for Use, Conditions, Disclaimer of Warranties and Limitations of Liability before using this product. If terms are not acceptable, return the unopened product container at once. By using this product, user or buyer accepts the following Conditions, Disclaimer of Warranties and Limitations of Liability. CONDITIONS: The directions for use of this product are believed to be adequate and must be followed carefully. However, it is impossible to eliminate all risks associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences may result because of such factors as weather conditions, presence of other materials, or the manner of use or application, all of which are beyond the control of Bayer CropScience. To the extent consistent with applicable law, all such risks shall be assumed by the user or buyer. DISCLAIMER OF WARRANTIES: TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BAYER CROPSCIENCE MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, THAT EXTEND BEYOND THE STATEMENTS MADE ON THIS LABEL. No agent of Bayer CropScience is authorized to make any warranties beyond those contained herein or to modify the warranties contained herein. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BAYER CROPSCIENCE DISCLAIMS ANY LIABILITY WHATSOEVER FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT. LIMITATIONS OF LIABILITY: TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER OR BUYER FOR ANY AND ALL LOSSES, INJURIES OR DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, WHETHER IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, SHALL NOT EXCEED THE PURCHASE PRICE PAID, OR AT BAYER CROPSCIENCE’S ELECTION, THE REPLACEMENT OF PRODUCT. NET CONTENTS: 2.5 Gallons PRODUCED FOR Bayer CropScience LLC 800 N. Lindbergh Blvd. St. Louis, MO 63167 1-866-99BAYER (1-866-992-2937) ABSOLUTE 500 SC Fungicide (PENDING) 12/2/2025