crop-chem-docs/corpus/epa_ppls/264-855.md

TRIMAX PRO INSECTICIDE

• EPA Reg No: 264-855
• Registrant: BAYER CROPSCIENCE, LLC
• Signal word: Caution
• Active ingredients: Imidacloprid (40.7%)
• Label accepted: 2013-12-12
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000264-00855-20131212.pdf

---

UNITED STATES ENVIRONMENTAL PROTECTION AGENCY WASHINGTON, D.C. 20460 NOTIFICATION DEC 1 2 2013 OFFICE OF CHEMICAL SAFETY AND POLLUTION PREVENTION Clive A. Haider Bayer CropScience LP 2 T.W. Alexander Drive Research Triangle Drive, NC 27709 Subject: - Notification to revise rotation restrictions EPA Registration No. 264-855 Primary Brand Name: TRIMAX PRO Insecticide Submission Date: October 25, 2013 Decision Number: 485682 Dear Mr. Haider: The Agency is in receipt of your Application for Pesticide Notification under PRN 98-10 dated and_fmds that the action requested falls within the scope of PRN 98-10. The label submitted with the application has been stamped "Notification" and will be placed in our records. If you have any questions, please contact Gene Benbow at (703) 347-0235 or via email at benbow.genefg),epa.gov. Sincerely, Gene Benbow Wildlife Biologist Insecticide-Rodenticide Branch Registration Division (7505P)

~riease read instructions on reverse before completin Form Approved. OMB No. 2070-0060 United States Environmental Protection Agency Washington. DC 20460 Registration Amendment Other OPP Identifier Number Application for Pesticide - Section I

1. Company/Product Number TRIMAX Pro Insecticide
2. Company/Product (Name) 264-855
3. EPA Product Manager Venus Eagle PMf #1
4. Proposed Classification None Restricted
5. Name and Address of Applicant (Include ZIP Coda) Bayer CropScience LP 2 T. W. Alexander Drive Research Triangle Park, NC 27709
6. Expedited Reveiw. In accordance with FIFRA Section 3{c)(3) (b)(i), my product is similar or identical in composition and labeling to: EPA Reg. No. Check if this is a new address Product Name Section - II Amendment - Explain below. Resubmission in response to Agency letter dated. Notification - Explain below. Final printed labels in repsonse to Agency letter dated "Me Too" Application. Other - Explain below. Explanation: Use additional page(s) if necessary. (For section I and Section II.) This notification is consistent with the provisions of PR Notice 98-10 and EPA regulations at 40 CFR 152.46, and no other changes have been made to the labeling or the confidential statement of formula of this product. I understand that it is a violation of 18 U.S.C. Sec. 1001 to willfully make any false statement to EPA. I further understand that if this notification is not consistent with the terms of PR Notice 98-10 and 40 CFR 152.46, this product may be in violation of FIFRA and I may be subject to enforcement action and penalties under sections 12 and 14 of FIFRA. Section - III
7. Material Thi* Product Wilt Be Packaged In: Child-Resistant Packaging dYes No • Certification must be submitted Unit Packaging Yes No If "Yes" No. per Unit Packaging wgt. container
8. Location of Net Contents Information Label I J Container Water Soluble Packaging Yes No If "Yes" Package wgt No. per container
9. Size(s) Retail Container
10. Type of Container Metal Plastic Glass Paper Other (Specify)
11. Location of Label Directions LJ6. Manner in Which Label is Affixed to Product Lithograph Paper glue Stenciled | I Other Section - IV
12. Contact Point (Complete items directly below for identification of individual to be contacted, if necessary, to pros*.'? #>is epp/ici.L'on.1 Name Clive A. Haider Title Director, Federal Registrations Tl»phone No. (Include Area Code) (919)549-2824 Certification I certify that the statements I have made on this form and all attachments thereto are true, accurate and complete. I acknowledge that any knowlinglly false or misleading statement may be punishable by fine or imprisonment or both under applicable law.
13. Signature
14. Typed Name Clive A. Haider
15. Title Director, Federal Registrations
16. Date November 25, 2013
17. Dete Application Received (Stamped) EPA Form 8570-1 (Rev. 3-94) Previous editions are obsolete. White - EPA Fa* Copy (onghnai) Yellow - AppScant Copy

s,\iC Bayer CropScience Document Processing Desk (NOTIF) Office of Pesticide Programs (7504C) Decembei-12, 2013 U.S. Environmental Protection Agency _ - _ .6 J Bayer CropScience Room S4900 2 r.W. Alexander Drive One Potomac Yard £T°; *"W4 2111 S. Crystal Drive Phone: (919) 549-2000 Arlington, VA 22202 Re: TR1MAX™ PRO Insecticide, EPA Reg. No. 264-855:

1. Amendment by Notification (per PR Notice 98-10) to Add Several Changes to the Label as per Gene Benbow e-mail to Jamin Huang, dated November 20th, 2013.
2. Amendment Request to Deletion of the 10-month rotational restriction for onion and bulb vegetables Ms. Venus Eagle: As allowed by PR Notice 98-10, we are notifying the Agency of minor labeling amendments for TRIMAX™ PRO Insecticide (EPA Reg. No. 264-855). In an e-mail received November 20th, 2013, from EPA (Gene Benbow) to Bayer CropScience (Jamin Huang), the Agency requested that several revisions be made to the subject product label and be submitted as a notification. These changes came about as part of the mandated pollinator health label language required for nitroguanidine neonicotinoid products meeting certain application conditions. This notification is consistent with the provisions of PR Notice 98-10 and EPA regulations at 40 CFR 152.46, and no other changes have been made to the labeling or the confidential statement of formula of this product. I understand that it is a violation of 18 U.S.C. Sec. 1001 to willfully make false statement to EPA. I further understand that if this notification is not consistent with the terms of PR Notice 98-10 and 40 CFR 152.46, this product may be in violation of FIFRA and I may be subject to enforcement action and penalties under sections 12 and 14 of FIFRA. Also part of this request, I am requesting an amendment to include, among the changes, the deletion of the 10-month rotation restriction for onion and bulb vegetables (page 8 of the label). Now that the use of imidacloprid on crop group 03-07 (Bulb Vegetables) is approved, the need for a plant back restriction is no longer necessary. Instead, Bulb Vegetables has been added to the list of crops for immediate plant-back. If you have any questions or need additional information, please contact me by phone at (919) 549-2824 or by e-mail at clive.halder@bayer.com. Page 1 of2

Sincerely, Clive A. Haider, Ph.D., Director, Federal Registrations cc: Jamin Huang Sundee Williams Danyel Ward Enclosures:

1. EPA Application Form 8570-1
2. Draft labeling (electronic copies: one version with highlighted changes, one clean copy version) Page 2 of2

NOTIFICATION DEC 1 2 2013 GROUP 4Ste, INSECTICIDE TRIM AX ™ PRO Insecticide For the protection of cotton, soybean and tree nuts from certain insects and maintenance of plant health. ACTIVE INGREDIENT: Imidacloprid, 1-[(6-Chloro-3-pyridinyl)methyl]-A/-nitro-2-imidazolidinimine 40.7% INERT INGREDIENTS: 59.3% TOTAL: 100.0% Contains 4.44 pounds of active ingredient per gallon. Shake well before using. EPA Reg. No. 264-855 EPA Est. No. STOP - Read the label before use KEEP OUT OF REACH OF CHILDREN CAUTIONFor MEDICAL And TRANSPORTATION Emergencies ONLY Call 24 Hours A Day 1-800-334-7577 For PRODUCT USE Information Call 1-866-99BAYER (1-866-992-2937) FIRST AID IF SWALLOWED: IF ON SKIN OR CLOTHING: IF INHALED: IF IN EYES: • Call a poison control center or doctor immediately for treatment advice. Have person sip a glass of water if able to swallow. • . Do not induce vomiting unless told to do so by a poison control center or doctor. Do not give anything by mouth to an unconscious person. • Take off contaminated clothing. <>-•-• • Rinse skin immediately with plenty of water for 15 to 20 minutes. Call a poison control center or doctor for treatment advice. • Move person to fresh air. • If person is not breathing, call 91 1 or an ambulance, then give artificial resp'raticn, preferably mouth- to-mouth if possible • Call a poison control center or doctor for further treatment advice. • Hold eye open and rinse slowly and gently with water for 15 to 20 minutec. 'Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice. • ; In case of emergency call toll free the Bayer CropScience Emergency Response Telephone No. 1-800-334-7577: Have a product container or label with you when calling a poison control center or doctor, or going for treatment. . Note To Physician: No specific antidote is available. Treat the patient symptomatically.

PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS AND DOMESTIC ANIMALS CAUTION Harmful if swallowed, absorbed through skin, or inhaled. Avoid breathing vapor or spray mist. Wash thoroughly with soap and water after handling. Remove contaminated clothing and wash before reuse. Personal Protective Equipment (PPE): Some materials that are chemical resistant to this product are listed below. More options can be obtained by following the instructions for Category C on an EPA chemical-resistance category selection chart. Applicators and other handlers must wear: • Long-sleeved shirt and long pants • Chemical-resistant gloves made of any waterproof material such as, nitrile rubber, butyl rubber, neoprene rubber, barrier laminate, polyethylene, polyvinyl chloride (PVC) or viton. • Shoes plus socks Follow manufacturer's instructions for cleaning/maintaining personal protective equipment (PPE). If no such instructions for washables, use detergent and hot water. Keep and wash PPE separately from other laundry. ENGINEERING CONTROLS STATEMENT When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS. USER SAFETY RECOMMENDATIONS Users should: Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. Remove Personal Protective Equipment immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing. ENVIRONMENTAL HAZARDS Do not apply directly to water, areas where surface water is present or to intertidal areas below the mean high water mark. Do not contaminate water when disposing of equipment washwaters. This product is highly toxic to bees exposed to direct treatment or residues on blooming crops or weeds. Do not apply this product or allow it to drift to blooming crops or weeds if bees are foraging the treatment area. This product is toxic to wildlife and highly toxic to aquatic invertebrates. This chemical demonstrates the properties and characteristics associated with chemicals detected in ground water. The use of this chemical in aieaj A here soils are permeable, particularly where the water table is shallow, may result in groundwater contamination.

PROTECTION OF POLLINATORS APPLICATIOM RESTRICTIONS EXIST FOR THIS PRODUCT BECAUSE OF RISK TO BEES AND OTHER INSECT POLLINATORS. FOLLOW APPLICATION RESTRICTIONS FOUND IN THE DIRECTIONS FOR USE TO PROTECT POLLINATORS. Look for the bee hazard icon ^s in the Directions for Use for each application site for specific use restrictions and instructions to protect bees and other insect pollinators. This product can kill bees and other insect pollinators. Bees and other insect pollinators will forage on plants when they flower, shed pollen, or produce nectar. Bees and other insect pollinators can be exposed to this pesticide from: o Direct contact during foliar applications, or contact with residues on plant surfaces after foliar applications o Ingestion of residues in nectar and pollen when the pesticide is applied as a seed treatment, soil, tree injection, as well as foliar applications. When Using This Product Take Steps To: o Minimize exposure of this product to bees and other insect pollinators when they are foraging on pollinator attractive plants around the application site. o Minimize drift of this product on to beehives or to off-site pollinator attractive habitat. Drift of this product onto beehives or off-site to pollinator attractive habitat can result in bee kills. Information on protecting bees and other insect pollinators may be found at the Pesticide Environmental Stewardship website at: http://pesticidestewardship.org/PollinatorProtection/Pages/default.aspx. Pesticide incidents (for example, bee kills) should immediately be reported to the state/tribal lead agency. For contact information for your state, go to: www.aapco.org/officials.html. Pesticide incidents should also be reported to the National Pesticide Information Center at: www.npic.orst.edu or directly to EPA at: beekill(5iepa.qov

OBSERVE THE FOLLOWING PRECAUTIONS WHEN MIXING AND APPLYING IN THE VICINITY OF AQUATIC AREAS SUCH AS LAKES; RESERVOIRS; RIVERS; PERMANENT STREAMS, MARSHES OR NATURAL PONDS; ESTUARIES AND COMMERCIAL FISH FARM PONDS. Spray Drift Management The interaction of many equipment and weather related factors determine the potential for spray drift. The applicator is responsible for considering all of these factors when making application decisions. Avoiding spray drift is the responsibility of the applicator. Mixing and Loading Requirements To avoid potential contamination of groundwater, the use of a properly designed and maintained containment pad for mixing and loading of any pesticide into application equipment is recommended. If containment pad is not used, maintain a minimum distance of 25 feet between mixing and loading area and potential surface to groundwater conduits such as field sumps, uncased well heads, sinkholes or field drains. For Aerial Applications The spray boom should be mounted on the aircraft so as to minimize drift caused by wing tip vortices. The minimum practical boom length should be used, and must not exceed 75% of the wing span or rotor diameter. Importance of Droplet Size An important factor influencing drift is droplet size. Small droplets (<150 - 200 microns) drift to a greater extent than large droplets. Within typical equipment specifications, applications should be made to deliver the largest droplet spectrum that provides sufficient control and coverage. Formation of very small droplets may be minimized by appropriate nozzle selection, by orienting nozzles away from the air stream as much as possible and by avoiding excessive spray boom pressure. Spray should be released at the lowest possible height consistent with good pest control and flight safety. Applications more than 10 feet above the crop canopy should be avoided. Wind Speed Restrictions Drift potential increases at wind speeds of less than 3 mph (due to inversion potential) or more than 10 mph. However, many factors, including droplet size, canopy and equipment specifications determine drift potential at any given wind speed. Do not apply when winds are greater than 15 mph and avoid gusty and windless conditions. Risk of exposure to sensitive aquatic areas can be reduced by avoiding applications when wind direction is toward the aquatic area. Restrictions During Temperature Inversions Do not make aerial or ground applications during temperature inversions. Drift potential is high during temperature inversions. Temperature inversions restrict vertical air mixing, which causes small suspended droplets to remain close to the ground and move laterally in a concentrated cloud. Temperature inversions are characterized by increasing temperature with altitude and are common on nights with limited cloud cover and light to no wind. They begin to form as the sun sets and often continue into the morning. Their presence can be indicated by ground fog; however if fog is not present, inversions can also be identified by the movement of smoke from a ground source. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical mixing. Airblast (Air Assist) Specific Recommendations for Tree Crops and Vineyards Airblast sprayers carry droplets into the canopy of trees/vines via a radially, or laterally directed air stream. The following specific drift management practices should be followed: • Adjust deflectors and aiming devices so that spray is only directed into the canopy; • Block off upwaici pointed nozzles when there is no overhanging canopy; • Use only enough air volume to penetrate the canopy and provide good coverage; • Do not allow the spray to go beyond the edge of the cultivated area (i.e., turn off sprayer when turning at end rows); • Only spray inward, toward fhe orchard or vineyard, for applications to the outside rows. No-Spray Zone Requirements for Foliar Applications Do not apply by ground wiihin 25 feet, or by air within 150 feet of lakes; reservoirs; rivers; permanent streams, marshes or natural ponds;'estuaries and comrr.e'cial fish farm ponds. Runoff Management Do not cultivate wi'hin 10 feefbTihe aquatic areas to allow growth of a vegetative filter strip. When used on erodible soils, Best Management Practices for minimizing runoff should be employed. Consult your local Natural Resources Conservation Service for recommendations in your use area. Endangered Species Notice Under the Endangered Species Act, it is a Federal Offense to use any pesticide in a manner that results in the death of a member of an endangered species. Consult your local county bulletin, County Extension Agent, or Pesticide State Lead Agency for information concerning endangered species in your area. Resistance Management Some insects are known to develop resistance to insecticides after repeated use. As with any insecticide, the use of this product should conform to resistance management strategies established for the use area. TRIMAX™ PRO Insecticide contains a Group 4A insecticide. Insect biotypes with acquired or inherent tolerance to Group 4A insecticides may eventually dominate the insect population if Group 4A insecticides are used repeatedly as the predominant method of control for targeted species.

The active ingredient in TRIMAX PRO is a member of the neonicotinoid chemical class. Avoid using a block of more than three consecutive applications of TRIMAX PRO and/or other Group 4A products having the same or similar mode of action. Following a neonicotinoid block of treatments, Bayer CropScience strongly encourages the rotation to a block of applications with effective products of a different mode of action before using additional applications of neonicotinoid products. Using a block rotation or windowed approach, along with other IPM practices, is considered an effective use strategy for preventing or delaying an insect pest's ability to develop resistance to this class of chemistry. Foliar applications of TRIMAX PRO or other Group 4A products from the neonicotinoid chemical class should not be used on crops previously treated with a long-residual, soil-applied product from the neonicotinoid chemical class. Other Group 4A neonicotinoid products used as foliar treatments include: Actara, Assail, CALYPSO, Centric, Clutch, Couraze, Gallant, Impulse, Intruder, LEVERAGE, Nuprid, Pasada, PROVADO and Venom. Other Group 4A neonicotinoid products used as soil/seed treatment include: ADMIRE PRO, Advise, Alias, Belay, Couraze, Cruiser, GAUCHO, Macho, Macho Max, Nuprid, Platinum, Venom, and Widow. Contact your local extension specialist, certified crop advisor and/or product manufacturer for additional insect resistance management recommendations. Also, for more information on Insect Resistance Management (IRM), visit the Insecticide Resistance Action Committee (IRAC) on the web at http://irac-online.org. DIRECTIONS FOR USE It is a violation of Federal law to use this product in a manner inconsistent with its labeling. See individual crops for specific pollinator protection application restrictions. If none exist under the specific crop, for foliar applications, follow these application directions for crops that are contracted to have pollinator services or for food/feed & commercially grown ornamentals that are attractive to pollinators: FOR CROPS UNDER CONTRACTED POLLINATION SERVICES Do not apply this product while bees are foraging. Do not apply this product until flowering is complete and all petals have fallen unless the following condition has been met. If an application must be made when managed bees are at the treatment site, the beekeeper providing the pollination services must be notified no less than 48-hours prior to the time of the planned application so that the bees can be removed, covered or otherwise protected prior to spraying. FOR FOOD CROPS AND COMMERCIALLY GROWN ORNAMENTALS NOT UNDER CONTRACT FOR POLLINATION SERVICES BUT ARE ATTRACTIVE TO POLLINATORS 3 Do not apply this product while bees are foraging. Do not apply this product until flowering is complete and all petals have fallen unless one of the following conditions is met: -• -'. ,- • The application is made to the target site after sunset ' !; . • The application is made to the target site when temperatures are below 55T ,;,,... • The application is made in accordance with a government-initiated public health response .. , , . . j ,,j • The application is made in accordance with an active state-administered apiary .rogis.ry program where beekeepers are notified no less than 48-hours prior to the time of the planned application so.dial the bees can be removed, covered or otherwise protected prior to spraying • The application is made due to an imminent threat of significant crop loss, and a documented determination consistent with an IPM plan or predetermined economic threshold is met. Every effort should be made to notify beekeepers no less than 48-hours prior to the time of the planned application so that the bees can be removed, covered or otherwise protected prior to spraying. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation.

AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labeling and the Worker Protection Standard, 40 CFR part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE), and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours. PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is: Coveralls Chemical-resistant gloves made of any waterproof material such as, nitrile rubber, butyl rubber, neoprene rubber, barrier laminate, polyethylene, polyvinyl chloride (PVC) or viton. Shoes plus socks APPLICATION DIRECTIONS Do Not Apply TRIMAX PRO In Enclosed Structures Such As Greenhouses Or Planthouses. Apply TRIMAX PRO as a directed or broadcast foliar spray. Thorough coverage of foliage is necessary without runoff for optimum insecticidal efficacy. Use adequate spray volumes, properly calibrated application equipment and spray adjuvant if necessary to obtain thorough coverage. Failure to provide adequate coverage and retention of TRIMAX PRO on leaves and fruit may result in loss of insect control or delay in onset of activity. TRIMAX PRO may be applied with properly calibrated ground or aerial application equipment. Minimum spray volumes unless otherwise specified on crop specific application sections are 10 gallons/Acre by ground application and 5 gallons/Acre through aerial equipment. TRIMAX PRO may also be applied by overhead chemigation (see additional CHEMIGATION DIRECTIONS FOR USE section below) if allowed in crop specific Application section. TRIMAX PRO use on crops grown for production of true seed intended for private or commercial planting is not permitted unless allowed under state-specific labeling. As with any insecticide, care should be taken to minimize exposure of TRIMAX PRO to honey bees and other pollinators. Additional information on TRIMAX PRO uses for these crops and other questions may be obtained from the Cooperative Extension Service, PCAs, consultants or local Bayer CropScience representatives. Do not apply more than 0.5 Ib active ingredient per year, regardless of formulation or method of application, unless specified within a crop-specific application section for a given crop. Additional product use information may be obtained by calling 1-866-99BAYER (1- 866-992-2937). Restrictions (Foliar applications) Do not apply more than 0.5 Ib active ingredient per acre, per year regardless of formulation or method of application, unless specified within a crop-specific section for a given crop. MIXING INST^'JCl IONS TRIMAX PRO is a suspension concentrate (flowable) formulation and should be shaken well prior to measuring/mixing. The formulation is thixotropiC'ind after sitting for a short time reverts to a gel or thick paste consistency helping to prevent phase separation common to most "flowableii". Alter mcd3"rt^ shaking the formulation thins to a relatively non-viscous liquid which pours and measures easily with very few trapped air bubbl3s:; another common problem of most flowables. TRIMAX PRO has demonsxraie'd easy mixing/blooming in water with varying degrees of hardness and temperature. TRIMAX PRO has demonstrated good mixing -and compatibility with many fluid fertilizers without dilution with water. However, because fertilizers vary widely in qi/slity^nd composition it is suggested that a jar test be performed (see Compatibility Note below) prior to full-scale mixing. To prepare th?> application imrture, add a portion of the required amount of water to the tank and with agitation add TRIMAX PRO. Complete filling tank with talcr.rB of water needed. Maintain sufficient agitation during both mixing and application. TRIMAX PRO may also be useo Witii;other pesticides and/or fertilizer solutions. Please see Compatibility Note below. When tank mixtures of TRIMAX PRO and other pesticides are involved, prepare the tank mixture as specified above and follow suggested Mixing Order below. Mixing Order When pesticide mixtures are needed, add wettable powders or wettable granules first, TRIMAX PRO and other flowable (suspension concentrate) products second, and emulsifiable concentrates last. Ensure good agitation as each component is added. Do not add an additional component until the previous is thoroughly mixed. If a fertilizer solution is added, a fertilizer/pesticide compatibility.agent may be needed. Maintain constant agitation during both mixing and application to ensure uniformity of spray mixture.

Compatibility Note Test compatibility of the intended mixture before adding TRIMAX PRO to the spray or mix tank. Add proportionate amounts of each ingredient in the appropriate order, to a pint or quart jar, cap, shake for 5 minutes, and let set for 5 minutes. Poor mixing or formation of precipitates that do not readily redisperse indicates an incompatible mixture that should not be used. For further information, contact your local Bayer CropScience representative. CHEMIGATION DIRECTIONS FOR USE Refer to DIRECTIONS FOR USE section before proceeding with chemigation application. Types of Irrigation Systems Chemigation applications of TRIMAX PRO may be made to crops through overhead sprinkler chemigation systems if specified in crop- specific Application sections. Do not apply TRIMAX PRO through any other type of irrigation system. Water Volume Make TRIMAX PRO chemigation applications as concentrated as possible. Retention of TRIMAX PRO on target site of insect infestation is necessary for optimum activity. Chemigation of TRIMAX PRO in water volumes exceeding 0.1 inch/Acre is not recommended. Uniform Water Distribution and System Calibration The irrigation system must provide uniform distribution of treated water. Crop injury, lack of effectiveness, or illegal pesticide residues in the crop can result from non-uniform distribution of treated water. The system must be calibrated to uniformly apply the rates specified. If you have questions about calibration, you should contact State Extension Service specialists, equipment manufacturers or other experts. Chemigation Monitoring A person knowledgeable of the chemigation system and responsible for its operation, or under the supervision of the responsible person, shall shut the system down and make necessary adjustments should the need arise. Drift Do not apply when wind speed favors.drift beyond the area intended for treatment. Required System Safety Devices The system must contain a functional check valve, vacuum relief valve, and low-pressure drain appropriately located on the irrigation pipeline to prevent water source contamination from backflow. The pesticide injection pipeline must contain a functional, automatic, quick-closing check valve to prevent the flow of fluid back toward the injection pump. The pesticide injection pipeline must also contain a functional, normally closed, solenoid-operated valve located on the intake side of the injection pump and connected to the system interlock to prevent fluid from being withdrawn from the supply tank when the irrigation system is either automatically or manually shut down. The system must contain functional interlocking controls to automatically shut off the pesticide injection pump when the water pump motor stops. The irrigation line or water pump must include a functional pressure switch which will stop the water pump motor when the water pressure decreases to the point where pesticide distribution is adversely affected. Systems must use a metering pump, such as a positive displacement injection pump (e.g., diaphragm pump) effectively designed and constructed of materials that are compatible with pesticides and capable of being fitted with a system interlock. Using Water from Public Water Systems ;,.,,... .0. Public water system means a system for the provision to the public of piped water for human consumption if such system-has at least 15 service connections or regularly serves an average of at least 25 individuals daily at least 60 days out of the year. Chtniigaiion systems connected to public water systems must contain a functional, reduced-pressure zone, back flow preyftnte' (RPZ> or Hie functional equivalent in the water supply line upstream from the point of pesticide introduction. As an option to the £PZ, the water from the public water system should be discharged into a reservoir tank prior to pesticide introduction. There shall be a complete physical break (air gap) between the outlet end of the fill pipe and to top or overflow rim of the reservoir tank of at leasi xwice, the inside diameter of the fill pipe. The pesticide injection pipeline must contain a functional automatic quick-closing check valve to prevent the f!ow cf fluid back toward the injection. The pesticide injection pipeline must contain a functional normally closed solenoid-operated valve, loc^fsd on the intake side of the injection pump and connected to the system interlock to prevent fluid from being withdrawn from the supply tank when the irrigation system is either automatically or manually shut down. The system must contain functions' in,tcr!ocking controls to automatically shut off the pesticide injection pump when the water pump motor stops or in cases where there is ho water p J.TVp,- Ahen the water pressure decreases to the point where pesticide distribution is adversely affected. Systems must use a metering pump such as a positive displacement injection pump (e.g. Diaphragm pump) effectively designed and constructed of materials that ar? compatible with pesticides and capable of being fitted with a system interlock. ROTATIONAL CROPS* Treated areas may be replanted with crops according to the following schedule.

IMMEDIATE PLANT-BACK All crops on this label plus the following crops not on this label: barley, canola, Christmas trees, corn (field, sweet and pop), cranberry, Globe artichoke, grape, mustard seed, okra, potato, rapeseed, strawberry, sorghum, soybean, sunflower, tobacco, watercress, wheat and all crops from the following Crop Groups as recognized and defined by EPA. BULB VEGETABLES - Crops of Crop Group 03-07 ROOT VEGETABLES - Crops of Crop Group 1 LEAFY GREEN VEGETABLES - Crops of Crop Group 4 BRASSICA (COLE) LEAFY VEGETABLES - Crops of Crop Group 5 LEGUME VEGETABLES - Crops of Crop Group 6 including: Edible Podded plus Dried plus Succulent Shelled, Peas and Beans FRUITING VEGETABLES - Crops of Crop Group 8 CUCURBIT VEGETABLES - Crops of Crop Group 9 CITRUS - Crops of Crop Group 10 POME FRUIT - Crops of Crop Group 11 STONE FRUIT - Crops of Crop Group 12 BUSHBERRY and CANEBERRY- Crops of Crop Group 13 HERBS - Crops of Crop Subgroup 19A TROPICAL FRUIT - Including: Acerola, Atemoya, Avocado, Birida, Black sapote, Canistel, Cherimoya, Custard apple, Feijoa, Llama, Jaboticaba, Guava, Longan, Lychee, Mamey sapote, Mango, Papaya, Passionfruit, Persimmon, Pulasan, Rambutan, Sapodilla, Soursop, Spanish lime, Star apple, Starfruit, Sugar apple, Wax jambu 30-DAY PLANT-BACK Cereals (including buckwheat, millet, oats, rice, rye, and triticale), safflower 12-MONTH PLANT-BACK All other crops "Cover crops for soil building or erosion control may be planted any time, but do not graze or harvest for food or feed. Application Information - TRIMAX™ PRO Insecticide TRIMAX PRO may be applied with properly calibrated ground or aerial application equipment. Apply specified rate per acre as a directed or broadcast spray to infested area at earliest threshold for target pest, as population begins to develop. Thorough uniform coverage of all plant parts is required to achieve optimum control. Scout fields and retreat if needed. Follow label directions and apply TRIMAX PRO to maintain plant health. The lower rates can be used early season when pest pressures are low or when tank-mixing with other effective products registered for target insect control. Degree of control or suppression of additional labeled pests will be determined, in part, by the stage of pest development at application and infestation level of those pests. TRIMAX PRO provides optimal performance against early instar and early nymphal stages of insects as well as bollworm/budworm eggs. Incomplete coverage may result in slower activity and/or less overall control from a single application than an application made with higher gallonages. The addition of an organosilicone-based spray adjuvant may improve coverage. Regardless of formulation or method of application, apply no more than 0.5 Ib of the active ingredient per acre per year unless specified, inrluc'hg.seed treatment, soil and foliar uses. COTTON Pests Controlled Cotton aphid r ' Cotton fleafippper- Bandedwinge d whitefly ; Plant bugs. (avrli ides Lygus hesperus) Green stink bug Southern gr2ei stink bug Bollworm/Budworm (ovicidal effect) Pests Suppressed Lygus bug (Lygus hesperus) Whiteflies (other than bandedwinged whitefly) Rate fluid ounces/Acre 0.9-1.8 1.35-1.8 Use Restrictions Pre-Harvest Interval (PHI): 14 days Minimum interval between applications: 7 days Maximum TRIMAX PRO allowed per year: 8.9 fluid ounces/Acre (0.31 Ib AI/A) Do not graze treated fields after any application of TRIMAX PRO.

Tank Mix Specifications Pests Controlled (In Addition To Pests Listed Above) For early season control of: Thrips For mid to late season control of: Plant bugs Stink bugs (including Brown stink bug) Grasshoppers Saltmarsh caterpillar Cotton leafperforator TRIMAX PRO Rate fluid ounces/Acre 0.9-1.35 0.9-1.35 Bidrin® 8 1/ Rate fluid ounces/Acre 1.6-3.2 4.0-8.0 Notes 1/ Refer to the Bidrin® 8 product label for specific use rates; observe all restrictions and precautions that appear on the label.

SOYBEAN1 Pests Controlled Rate fluid ounces/Acre Aphids Bean leaf beetle Cucumber beetles / Robtworm adults Japanese beetle (adults) Leafhoppers Whiteflies 1.35 Notes and Restrictions Pre-Harvest Interval (PHI): 21 days Minimum interval between applications: 7 days Maximum TRIMAX PRO allowed per year: 4.05 fluid ounces/Acre (0.14 Ib AI/A) 1/ Use not permitted in California unless otherwise directed by state specific 24(c) labeling. TREE NUTS 1' Crop group 14 except Almond Pests Controlled Aphids (except Black pecan aphid) Leafhoppers/Sharpshooters Phylloxera sp. (leaf infestations) Spittlebugs Whiteflies Black pecan aphid Mealybugs San Jose scale Rate fluid ounces/Acre 1.3-2.6 2.9 Notes and Restrictions Pre-Harvest ir.Uva: (PHI): 7 days Minimum inte.'val between applications: 6 days Maximum TR.WAX PRO elhwed per year: 10.4 fluid ounces/Acre (0.36 Ib AI/A) Minimum application voluioe (waler): 50 GPA - ground application, 25 GPA - aerial application Do not apply pre-bioom o;' durrr bloom or when bees are foraging. Applications Applications for control of Ci,r. Jose scale should be timed according to crawler stage, treating each successive generation. Two applications on a 10 to 1<-day interval may be required to achieve control. 1/ Use not pgrmi+ted in California unless otherwise directed by state specific 24(c) labeling.

STORAGE AND DISPOSAL Do not contaminate water, food, or feed by storage or disposal. Pesticide Storage: Store in a cool, dry place, out of direct sunlight, and in such a manner as to prevent cross contamination with other pesticides, fertilizers, food, and feed. Store in original container and out of the reach of children, preferably in a locked storage area. Handle and open container in a manner as to prevent spillage. If the container is leaking, invert to prevent leakage. If container is leaking or material spilled for any reason or cause, carefully dam up spilled material to prevent runoff. Refer to Precautionary Statements on label for hazards associated with the handling of this material. Do not walk through spilled material. Absorb spilled material with absorbing type compounds and dispose of as directed for pesticides below. In spill or leak incidents, keep unauthorized people away. You may contact the Bayer CropScience Emergency Response Team for decontamination procedures or any other assistance that may be necessary. The Bayer CropScience Emergency Response telephone number is 1-800-334-7577. Pesticide Disposal: Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility. Container Handling: Non-refillable container. Do not reuse or refill this container. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container % full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Offer for recycling, if available or reconditioning, or puncture and dispose of in a sanitary landfill or by incineration or, if allowed by State and local authorities, by burning. If burned, stay out of smoke.

IMPORTANT: READ BEFORE USE Read the entire Directions for Use, Conditions, Disclaimer of Warranties and Limitations of Liability before using this product. If terms are not acceptable, return the unopened product container at once. By using this product, user or buyer accepts the following Conditions, Disclaimer of Warranties and Limitations of Liability. CONDITIONS: The directions for use of this product are believed to be adequate and must be followed carefully. However, it is impossible to eliminate all risks associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences may result because of such factors as weather conditions, presence of other materials, or the manner of use or application, all of which are beyond the control of Bayer CropScience. All such risks shall be assumed by the user or buyer. DISCLAIMER OF WARRANTIES: TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BAYER CROPSCIENCE MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, THAT EXTEND BEYOND THE STATEMENTS MADE ON THIS LABEL. No agent of Bayer CropScience is authorized to make any warranties beyond those contained herein or to modify the warranties contained herein. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BAYER CROPSCIENCE DISCLAIMS ANY LIABILITY WHATSOEVER FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT. LIMITATIONS OF LIABILITY: TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER OR BUYER FOR ANY AND ALL LOSSES, INJURIES OR DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, WHETHER IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, SHALL NOT EXCEED THE PURCHASE PRICE PAID, OR AT BAYER CROPSCIENCE'S ELECTION, THE REPLACEMENT OF PRODUCT. Net Contents: 60 Fluid Ounces ADMIRE, CALYPSO, LEVERAGE, PROVADO and TRIMAX are registered trademarks of Bayer CropScience. Actara, Centric, Cruiser and Platinum are trademarks of a Syngenta Group Company. Assail and Intruder are registered trademarks of Nippon Soda Company, LTD. Bidrin is a registered trademark of AMVAC Chemical Corporation. Alias and Pasada are trademarks of Makhteshim Agan Couraze is a trademark of Cheminova Belay and Clutch are registered trademarks of Arvesta Corporation. Venom is a registered trademark of Valent USA Corporation. Macho and Impulse are trademarks of Albaugh Inc. Advise and Gallant are trademarks of Agriliance, LLC Widow is a trademark of Loveland Products, Inc. Nuprid is a trademark of NuFarm America Inc. PRODUCED FOR Bayer CropScience Bayer CropScience LP P.O. Box 12014, 2 T.W. Alexander Drive Research Triangle Park, North Carolina 27709 1 -866-99BAYER (1 -866-992-2937) TRIMAX PRO Insecticide (PENDING) 10/28/2013, Notifi 11/22/13