crop-chem-docs/corpus/epa_ppls/279-3054.md

COMMAND 6 EC

• EPA Reg No: 279-3054
• Registrant: FMC CORPORATION
• Signal word: Danger
• Active ingredients: Clomazone (64.3%)
• Label accepted: 1987-09-11
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000279-03054-19870911.pdf

---

'.'/ 'Code 619 'CommancJ® 6 EC Net Contents f' fY) CJ-S ';) 71- ]oS'// I OiS • '. Herbicide For Agricultural or ComIYlerdal Use Only EPA Rp.g. No. 279-3054 E? A Est. 279- Active Ingredient: By WI. 2-(2-Chioropheny/)methyJ·4. 4·dimethyl-3-isoxazolidinone ................... ,. 64.3% Inert Ingredients: .................................. 35.7% 100,0% Contains 6 pounds of active ingredient per gallon U.S. Patent No. 4.405,357 KEEP OUT OF REACH OF CHILDREN DANGER FIRST AID If In eyes: Flush immediately With plenty of water. Get medical duenli:>n. If swallowed; Drink promptly large quanlities of milk or waler. Avoid alcohol. 00 not induce vomiting. Calf a physician. If Inhaled; Remove to fresh air. If not bu'!athing. give artificial respira· tion. preferably mouth·to-mouth. Gel medical attention. If on skin: Remove contaminated clothing. Wash skin with plenty of soap and wafer. See other panels for additional precautionary Information. For Emergency Assistance Call: (716) 735·3765 PRECAUTIONARY STATEMENTS Hazards to Humans (and Domestic Animals) Danger Causes persitent but reversible eye injury. Karmful if swallowed, in· haled. or absorbed through skin. 00 not get in eyes or on clothing. AVOid contact with skin. When measuring or mixing. wear goggles or lace shield. rubber gloves and full arm and leg length clothing. Avoid breath· ing vapor or spray mist. Wash thoroughly with soap and water aftal handling. Remo/e contaminated clothing and wash before reuse. ACCEPTED SEP 111987 UndeI the Fedcrol Inecide, Fungicide. ond RodentiCl Act. os o-ncnded. lor Ihe pelUCld e tet;;isteted un4eL;t-": ...... "'-.5// EPA Reg. No. , ',. .... ,.-.1 :>(j- FMC Corporation Agricultural Chemical Group Philadelohia PA 19103 7187 ENVIRONMENTAL HAZARDS Do not apply directly to water or wellands. Do not apply when weather conditions favoc drift from the area treated. Do not apply where runoH is likely to occur. Do not contaminate water by cleaning of equipment or disposal of wastes. Apply this product only as specified on this label. SPECIAL PRECAUTION Off-site movement of spray drift Of V8JX)rs 01 Command herbi­ cide can cause foriar wtiftening or yeffowing of some plants. Prior to making applications. read and strictly folloW all precautions and applicatiOn. instructions on this label. DIRECTIONS FOR USE II is a violation of Federal law to use this product in a r anner incon­ sistent with its labeling. Do not apply this product through 8n' type of irrigation system. STORAGE AND DISPOSAL Pesticide Storage Do not freeze. Do nol st01i~ below 40"F. If solid crystals are observed, warm material to about GOOF by placing container in warm location. Shake or roll container periodically to redissolve solids. Keep oul of reach of children and animals. Store in original con· tainers onif. Store in a dl)' place. Carefully open containers. After partial use, replace lids and close tightly. Do not put concentrate or dilute material into food or drink containers. Do not contami· nate other pesticides, fertilizers. water, food or feed by storage or disposal. In case of spill, avoid contact, isolate area and keep our an/mars and unprotected persons. Confine spills. Call FMC Collect (716) 735·3765. To confine spill: Oike surrounding area or abs-orb with sand. cat litter or commercial clay. Place damaged package in a holding con~ainer. Identify conCan's. Pesticide Disposal Pesticide wastes are toxic. Improper disposal of excess pesti­ cide. spray mixture or rinsate is a Vlolation of Federal law. If these 'vasles cannol be dislX'sed 01 by use according 10 label inSlruc­ lions, contact your State Pestidde or Environmental ContrOl Agency or the Hazardous Waste representative at the nearest EPA Re­ gional Office for guidance. •••••• Container Dlspolal •• • •• • Plastic Containers: Triple rinse (or equ1faletftl. *Then dffer (or­ recycling or reconditioning, or puncture amf jsj50se 01 ir..IIn'­ itary landfill or by incineration, or, if allowed l5y state and ~~. authorities, by burning. If burned, stay out of smoke. • •••• Motal Containers: Triple rinse (or equivalent). Then offer fa," re·· cycling or reconditioning, or puncture and disJN:i£! f in a s'dF1/rY landfill. or by other procedures approved by rale and local au- thorities. Do not cut or weld metal contaifllef'3! • • ••••• " GENERAL INFORMATION ."-:. ":": Comnland 6 EC selective herbicide must be ·u'ilized as a Mil ftltor­ poraled treatment for the control of annual gre.NcCbroadleaf weeds 10 soybeans. •• Command 6 EC herbich.Jfl may be tank mixed with other soybean her­ bicides 10 broaden the weed control spectrum compared to the products applied alone. Command 6 EC may be lank mixed with Sencor. or lexone· herbicides and applied preplanl incorporated. Water or liquid fertilizer may be used as 0 carrier for Command 6 EC when applied alone. or when tank (f,ixed with Sencor or lexone unless use directions specifically stale otherwise,

IMPORTANT F~ILURE TO OBSERVE THE APPLICATION PRECAUTIONS SECTION OF THIS LABEL MAY RESULT IN INJURY TO DESIRABLE VEGETATION • DeSirable plants including some sracies of trees. shrubs, frowers, agronomic crops, and fruits and v ~gelables are sensitive 10 Com­ mand herbicide. • Foliar contact with spray drift or vapors may cause whitening or yel­ lowing 01 sensitive plants. Symptoms are generally temporary in na­ lure but may persist on some plants. SPRAYER CLEANUP 00 nol drain or flush equipment on or near desirable trees or other plants, or in areas where their rools may extend or in locations where the chemical may be washed or move into conlact with their rools. 00 not contaminate any body 01 water including irrigation waler thai may be used on other crops. Carefully follow sprayer dean-up instructions noled below 10 prevent spray lank residues from damaging olher crops. Sprayer equipment should be thoroughly rinsed to remove residues of herbicide thai might injure other subsequently sprayed crops. The steps below should be followed (or the thorough rinsing of spray equipment following applications of Command, 6 EC herbicide or lank mixes of Command 6 EC with other labeled products.

1. Drain any remaining spray solution from tank. pump. hoses and boom and discard in an approved manner (See Note belOW). (tI2) Clean tank and fittings by: • Thoroughly hosing down the inside walls of the spray tank with a quantily of waler equal to % of the lotaltank capacity and operating the pump to circulate this solution through the sprayer system for 15 minutes. • Washing down the outside surfaces 01 equipment. • Removing nozzle lip and screen from end nozzle in each boom section and allowing several gallons 01 nnsate solution to flush completely through boom (coliecl rinsate while flushing).
2. Thoroughly drain remaining rinsate solulron from tauk. pump and hoses. combine WIth boom Ilushings and dIspose of all rinsates from t:Jis first rinsing in an approved manner (see Note below).
3. Remove the remaining nozzle tips. and screens and Ihe line filter and wash in a pail of warm soapy water. thoroughly rinse and reo place.
4. Hose down the inside walls of the spray tank 8 second time and circulale this solulion using the same procedure as noted in #2 above.
5. If the next use of the sprayer will be for applying a preemergenl or preplant incorporated pesticide. rinsate from this second rinsing may be utilized by diluting with the water for the next pesticide load; HOWEVER If the next use of the sprayer will be a postemergence applied pesticide, drain rinsate solullon from this second rinsing and retain for use with a preemergent or preplant incorporaled pesticide. Refill lank (after drain· ing second rinsate solution) in accordance with postemergence product label directions. NOTE: Dispose of excess spray mixture andlor rinsale from firsllank rinsing by application and incorporation 10 crlJpland as described on this label. If excess spray mixture and/or rinsales from firslrinsing cannot be disposed of according to label instructions, dispose of in compliance with local. state and Federal guidelines. Contact your state pesticide or Environmefltal Control Agency or the Hazardous Waste representative at the nearest EPA Regional Office for guidance. GENERAL MIXING INSTRUCTIONS C?r~ m!-,st be lake~ when mixinQ Command 6 EC herbicide. Avoid mlxmg In areas adjacent to deSirable plants (See Section headed "IMPORTANT"). Command 6 EC Alone: Mix Command 6 EC with water or liquid fer­ tilizer in the following manner: Fill the spray tank one·half to three­ fourths full with water or liquid fertilizer. add the proper amount of Com­ mand 6 EC, than add the rest of the water or liquid fertilizer. Provide sufficient agitation during mixing and application to maintain a unifornl spray mixture. Tank Mixtures: Fill spray lank one' fourth 10 one-third full with water; with agitator operating add the recommended amounl 01 ingredients using the following order: dry formulations (e.g., wettable powders, dry 1I0wables) first. liquid suspensions (e.g .• flowables) next. Mix thoroughly and fdllank one·half full continuing agitation. Add Command 6 EC her· bicide to tank while maintainin9 agitation. Complete lilling the s~ rayer lank with water. Maintain agitatIon during fdling, mixing and application. When using drift reducing agents, follow specific product label instruc· tions lor order of addition to spray tank. FertiliZer Spray Mixtures: Soil incorP.lrated applications of Command 6 EC alono. or in cc.mbi,lation with eIther Scncor or Lexone herbicide, in conjunction with fertilizer solutions may be used unless otherwise directed. Small quantities should be tested for compatibility by the f~4 lowing procedure before mixing tankful quantities:
6. Put 1 pint of fertilizer solution in a quart jar.
7. Add the appropriate amount of herbicide based on the tables below. If more than one product is 10 be used, add each separately using tt:.e following sequence: wettalJle powders or dry ilowables first, flow4 able liquids second and liquids (e.g., EC's) last. Amount To Be AdcMd HerDlclde Rate/Acre Per Pint 01 Auld Fertilizer" . WeHable Y2 pound ~ level teaspoon Powders 1 pound 1 % level teaspoons or 2 pounds 3 levol teaspoons Dry Flowables 3 pounds 4 Y2 level teaspoons (Dry Granules) Emulsifiable 1 pint lfa. level teaspoon Concentrates 1 quart 1 level teaspoon or 2 quarts 2 level teaspoons Flowables 3 quarts 3 level teaspoons ·Based on a spray volume of 25 gpa. For lower or higher spray volumes, adjust fluid fertitizer quanlity accordingly.
8. Close jar c:'ld shake well.
9. Watch mixtltre for se'.eral seconds, again in 5 minutes and again after 30 mi.tUtl.'"'i. If h.!rbicide/fertilizer combination remains mixed or can be remixed readily (i.e., does not permanently separate. foam, gel or become lumpy), the mb.iure is compatible and can be mixed in full volumes and sprayed. If the mixture is compatible. prepare spray by adding fertilizer solution to the tank first, then follow directions noted below:
10. Command 6 EC Alone: Dilute with 2 parts 01 waler and add slowly to spray tank 01 fertiliZer with agitator running. Main~ain agitation during application.
11. Command 6 EC plus Tank Mixtures: Dilute individual producls with two (2) parts of water. then add to the spray tank of fertilizer, whiie mLintaining agitation, using the following order-slurry of dry lor4 mulations (wettable powders, dry flowables) lirst, diluled liquid for· mulations (EC's, flo'Nables) second. Continue agitation during application. APPLICATION PRECAUTIONS: Do not apply Command 6 EC within 1,000 feet of the areas listed below: Towns and Sutxfivisions Commercial Veqetable Production Commercial Frwt Production Commercial Nurseries Commercial Greenhouse Plants such as the following may show symptoms of fotiar whl· fening or yellowing if contacted by Command herbicide. It Is ree· ommended that, prior to application, adjacent properties be checked and Ihal .spraying within 100 feel of such planls be avoided. Tr}!l; (Deciduous) J.!ll!!l; (Evergreen) Fir species Spruce species I. (inc. !ruH & ornamenlal types) Ash (Green, Wliile, ••••• Moonlain) Basswood Boxetder Calalpa Charry (inc. lrun & ornamental types) Cottonwood Elm Ginkgo Hackberry Mulberry Peach Pear (Inc. fruit & ornamental types) Pecan Poplar Russian olive Tree·ol·Heaven Tulip tree Walnut trees v.r_ :- Granged 0 0'- 0 Honeysu~: • Rosas Yew o 00 • OOC:ifaomic OrQ:09ll • Aalfa ",-r. Oals •••• ~mbles8nd lower planls o • 00 Willow species Stra",berry o 0 0 o 0 ••••• o 0 o .. ... o •••• • o "'." "I. o 0 00 0 Apply Command herblcide only 10 surface. Ihet will be Incorpo­ raled. Do nol apply Command to non·field aro •• Including lonce rows, waterways, ditches, and road sides.

Spray Drift Precautions: Care should be laken 10 minimize spray drift when applying Command herbicide. • Do not apply when weather conditions favor drift. Wind speed should • not exceed 7 mph. o A minimum sj:ray volume 01 15 gallons per acre is recommended with ppprorriate nozzle types and sizes that produce coarser sprays. • The use 0 agriculturally approved drift reducing additives is recom­ mended for application volumes of 15 to 40 gallons per acre when spraying in the proximity of desirable plants (see lisl above). • The use 01 an agriculturally approved drift reducing additive is required at finished spra~' volumes of 10 10 1 ~ gallon.s per ?cr~ .. • Use minimum nozzle pressure and boom heIght while maintaining uniform spray pattern. Rotational Cropping Precautions: Temporary whitening or yellowing of leaves may occur on approved rotil:tinal cops where udesirabl soil residues of Command. 6 EC herbicide eXIst. The followmg condi­ tions may result in undesirable soil residues. and greater potential for injury to rotational crops:

1. Improper applicalion including: • Exceeding label recommended rales. • Overapplication resulting throuQ.h use of worn nozzles. excessive overlapping of spray swaths. falling 10 shut off spray booms when turning (end row areas). or slowing or stopping sprayer.
2. Application to soils with pH of 6.0 or lowel. Refer to Rotational Crop·Grazing and Feeding Restrictions below for additional rotational crop information. ROTATIONAL CROP/GRAZING AND FEEDING RESTRICTIONS (' The following :olalional crops may be planted nine (9) months after the application of Command herbicide. 00 not rotate 10 any crops other than those listed below as crop injury may occur: Soybeans f"rghum Cucurbits Field Corn f. Inuls Cotton Sweet COcll Rit..d Tobacco Popcorn Sugar beets Potatoes Peas Dry Beans Snap Beans NOTE: Do not rotate to wheat, oats, barley, rye, alfalfa or seed corn in the fall of the year of application or In the spring of the following year as ClOp injury may occur. Cover crops, however, may be planted anytime but stand reductions may occur in some areas. 00 not graze or harvest these cover crops for food or feed. Do not allow livestock to graze on treated soybean vines or feed treated vines or vine trash to livestock. REPLANTING INSTRUCTIONS If initial seeding 01 soybeans fails 10 produce a stand. soybeans may be replanted in fIelds treated with Command 6 EC herbicide alone (or with recommended tank mixtures). Do not retreat field with a second application of Command 6 EC. When tank mixing with a labeled product rfer to the soybean replant instructions for that product. 00 not replant trealed fields with any crop (except soybeans) at inlervals which are inconsistent with the RelatIonal Crop Restrictions on this label. SPECIAL PRECAUTION Off-site movement of spray drift or vapors of Command:.r herbi· cide can cause foliar whitening or yellowing of some plants. Prior to m&ing applications, read and strictly follow all precautions and application instructions on this label. GENERAL APPLICATION INSTRUCTIONS This Product Must Be Incorporated Do not apply aerially or through irrigation equipment. Ground Applications Broadcast Application: Apply Command 6 EC alone or in tank mix combinations by ground equipment using a finished spray volume of 10 to 40 gallons of waler per acre. NOTE: The use of an agrIculturally approved drift reducing additive Is required at finished spray vol­ umes 0110 fo 15 gallons per acre. Use nozzles suitable for broadcast boom appilcation of herbicides. Coarse sprays are less likely to drift out of the larget area than fme sprays. See "APPLICATION PRECAU­ TIONS" Section lor specifiC recommendations to reduce spray drift. For Command 6 EC lank ffiixtur€<> with wettable powder or dry flowable lormulations. nozzle screens and strainers should be no fmer than SO· mesh. Pre plant Incorporated Application: Appty Command 6 EC to the SOIl surface and umformly incorporate. Select equir;ment suited accordingly lor shallow or deeper irocorporation. ApplicaUon and Immediate incorporation to a depth of 1 to 3 Inches Is required unless the soli surface Is dry. On dry soils. incorporation 10 a depth of 1 to 3 inches must be completed within 3 hours of Com· mand herbicide application Soit must be in good tilth to anow for thor· ough mixing of the soil. Application to overly moist or W'" soils wi:1 increase Ihe potential for off·site movement of Command herbicide va­ pors and may result in poor soil incorporation and unsatisfactory weed control. ONE PASS INCORPORATION Suggeoled Impmenl. For one pass incorporation use C or S shank ffekt cultivators equipped 'ftith a leveling d'3vice such as a spike or coil Une harrow or rO:ring basket attadtment. Field cultivator must have 3 or 4 rows of sweeps spaced at 7 inch or less intervals and staggered so thai no s1 is left untumed. Equipment design including any drag attachments must be adequate to avoid soil ridging which may result in streaked or reduced weed control. The implement musl be opeated at 6 to 8 mph and set to cut 3 to 4 inches deep to incorporale herbicide I to 2 inches. Combination equipment (Ihree or more tillage devices combined and used as a single tool) should be operated at a depth of 3 to 4 indtes and a minimum speed of 6 mph. PTO-drive seed bed preparation eqt1ipment should be set 10 cut 2 inches deep and operated at 4 mph or less. TWO PASS INCORPORATION When using two pass incorporation. the second pass should be at an angle to the first pass. Suggested Implements Disc set to cl 3 to 4 inches deep at 4 to 6 mph. Blades should be less than 20 inches in diameter and spaced 9 inches or less apart. Rolling cultivator set to cut 2 to 3 inches deep al 6 to 8 mph (use on coarse or medium textured soils only). Field cultivator with 3 to 4 rows of sweeps spaced al 7·inch intervals or less and set to cut 3 inches deep at 5 mph or greater. COMMAND 6 EC HERBICIDE APPLIED ALONE­ Northern U.S. Area (see map) Table 1 : Command 6 EC Herbicide Applied Alone Broadcast Rates Per Acre- Soil Texture Coarse (light) Soils: (sand, loamy sand. sandy loam) Medium Soils: (loam. silt, silt loam, sandy clay, sandy clay loam) Fine (heavy) Soils: (silty clay, clay loam. silty clay loam. clay) Command 6 EC 1 to 1% piS . •••••• •• QI ••• 11 O.!. II. oz. • • 1 t04 V3 pIS. or. • • •• 16 to 21.3 fl. oz • •• : ••• V'I~~. • or "2III. oz. • • ••••• • • • Selec.llower 10 higher rates within lhe ranges noled 00._ ofiIlighler (oJf&'M". soil types (e.g .• sand. loamy sand. sandy loam) withift i ~",ral group. ~ • •• •• WEEDS CONTROLLED' ••• • Grass Weeds Broadleaf wftd Barnyardgrass· Crabgrass (Large, Smooth) Fall panicum Foxtail (Green, Giant. Yellow,· Robust Purple) Goosegrass Seedling Johnsongrass· Common purslane Common ragweed· Jimsonweed· Lambsquarters Prickly sida Smartweed· (Pennsylvania Smartweed) Volvetleaf Venice mallow

1(' WEEDS PARTIALLY CON-,·ROLLED: Grass Weeds Broad/ear Weeds Shattercane Cocklebur • Use 1'h plSJA Oil coarse and medIum lexture soils wilh high populalions 01 Barnyardgrass. Vella .... (oxtail, Seedling Johnsongrass. Jjmsonweed, Common ragweed and Smartwecd. COMMAND 6 EC APPLIED IN COMBINATIONS COMMANO~ 6 EC herbicide plus Sencor· or Le).()ne"-Northern U.S. Area (see map under Command 6 EC Applied Alone). A tank mix combination 01 Command 6 EC herbicide and Saneer Of lexone herbicides will broaden the weed control spectrum compared to either herbicide used alone. Use Commalld 6 EC herbicide and Sen· cor or Lexone herbicides at the rates lisled in Table 2. Table 2: Command 6 EC Plus Sencot/Lexone Broadcast Rales Per Acre + ,-- Stir;::cr OF' Soil Texture" CommandS EC or Lexone OF Coarse (fighlJ ..... oirs: 1 to 1% pIS. (loamy sand". sandy or v .. (0 % lb. loam) 16 1021.3 fl. oz. Medium Soils: (loam. sill 1 (01'13 pis. loam. sandy clay, sandy or '410 Y2lb. clay loam) 161021.311. oz. Fine (heavy) Soils: (silty 1% pIS. clay, clay loam. silly clay or %10 %Ib. toam. clay) 21.3 ff. oz. SeleclloNer 10 higher rales wlth,n Ihe ranges noted baseo on lighter 10 heavier sod types (e g. loam. sill loam. sandy cray. sandy clay loam) Within a textural group. For pinis Sencor 4 or lexone 4l. multiply pooJnds OF by 1.5. O. Do nol use Command 6 EC .n combinaliOn ",,.ilh Sencor or lexone on soils With less than 0.5% organIC malter. on sand. or on loamy sand with less than 2% organic matter. or on SOils having a calcareous surface area or a pH of 7.5 (lr higher as Sencor. lexone injury 10 soybeans may occur. WEEDS CONTROLLED: Grass Weeds All species listed under Com­ mand 6 EC Hr 'rOI~ de Applied Alone. Use 'h ro !r7 Ib.1A Sencor Of 01 Lexone OF. Sroadleat Weeds All species listed under Com· mand 6 EC ; 'ferbicide Applied Alone plus the following: Carpetweed Pigweed (Redroot, Smooth;' Wild mustiird When applying mixtures of Command 6 EC plus Sencor or Lexone, observe all calJlions and limitations appearing or. the labels of each product. Observe all Application Precautions. Rotational Crop/Grazing and Feeding Restrictions and Replanting Instructions sections of eacf: products' label when using lank mixtUres. COMMAND 6 EC HERBICIDE APPLIED ALONE­ Southern U.S. Area (see map) Note: Southern U.S. area includes the following counties in Missouri-­ Scott, Butler, Stoddard, Mississippi. New Madrid, Dunklin and Pemiscol. Iy Command 6 EC herbicide at 1% to 1% ptsJA. Select lower to hIgher rales within the langes noI.ed based on lighter to heavier soi! types (e.g .• sand,loamy sand, sandy loam) within a textural group. Refer to Table 1. 2 or 3 (or soil textural groups . WEEDS CONTROLLED: Grass Weeds Barnyardgrass Broadleaf signalgrass (Brachiaria) Crabgrass (Large. Smooth) Fall panicum foxtail (Green. Giant. Yellow, Robust Purple) Goosegrass Seedling Johnsongrass Southwestern cupgrass Texas panicum Broadleaf Weeds Cocklebur' . Common purslane Common ragweed Florida pusley Jimsonweed lambSQuarters Prickly sida' Proslrate spurge' SmartNeed (Pennsylvania Smartweed) Tropic croton Velvetlear Venice mallow , Use 1 plsJA fOr fields with high weed preSSUre. • Control in southern U.S. area Slates includIng Al, AR. FL. GA. LA. MS. TN and the Boolheel counties of MO (see map footnote above). and in the slales 01 KY. VA and WV. WEEDS PARTIALLY CONTROLLED: Grass WeedS Bermudagrass Red rice Shattercane Sroadlea' Weeds Black nightshade Pigweed (RedrOOI. Smoolh) Redvine COMMAND 6 EC APPLIED IN COMBINATIONS COMMAND 6 EC HerbIcide plus Sencor or Lexone-Southern U.S. Area (see map 'under COmmand 6 EC Herbicide Applied Alone) A tank mix combination of Command 6 EC herbicide and Sencor or Lexone herbicides will broaden the weed control spectrum compared to either herbicide alone. Use Command 6 EC herbicide and SenCOI or Lexor.e herbicides at Ihe rates listed in Table 3. Table 3: Command 6 EC Plus Sencot/Lexone Broadcast Rates Per Acre· Sencor OF' Soil Texture*" Command 6 EC or lexone OF Coarse (light) Soils: 1 % to 113 pIs. (loamy sand'·. sandy or 't.. to 'h lb. loam) 21.3 to L6.7 fl. oz. Medium Soils: (loam, silt. 1% to 1% pIS. silt loam, sandy clay, or If .. 10 %. lb. sandy clay loam) 21.3 to 26.7 fl. oz. Fine {heavy) Soils: (silly l%lol%pls. clay, clay loam, silty clay or %to%lb. loam, clay) 21.3 10 26,7 n. OZ, • Select lower 10 higher rates wilhin rhe ra.'!:f6S noted based on lighter to heavier SOil types {e.g., sand, lOamy sand, sandy loamI wrrhin a lel.iU(ai group. • For pints Sencor 4 Of lexone 4l. mUltiply pounds OF by 1.5. .. 00 nol use Command 6 EC in combination with Sencor or Lexone on soils with less than 0.5% organ maHer. on sand, or on loamy sand with less than 2%, organic maHer. or on SOils having a calcareous surface area or a pH d 7.5 or higher as Sencontexone injury to soybeans may occur. Use ~ 10 1 pound $encor Of lexone OF on silty Clay and heavy day soils Of the MiSSissippi OeHa. WEEDS CONTROLLED: Grass Weeds All ;:;pecies listed under Com· mand 6 EC Herbicide Applied Alone. WEEDS PARTIALLY CONTROLLED: Grass Weeds All species listed under Com· mand 6 EC Herbicide Applied Alone. "'Use higher rare :)Ilexone or $encor. BroadlelL w,e<ts •••••• All spe<;i~ .. lio(ed un':'r <!on>­ mand ftec 'kerbicidll kgl~ Alone plu9lthe followmg. • .. Carpetweed Hemp sesbania •• : ••• (coffee wltd) ....... PigweedrtMrool. Smool/l) Spurred ft"Oda Wild muslird •• : •• : ... •• Broadtaal ~eds &. : •• : All ~iPs lilled unCdr e&n­ mand 6 EC "erbicide Applied Alone plus fttI following: Sicklepod'" When applying mixtures of Command plus Sencor or lexone, observe all cautions and limitations appearing on the labels of each product.

• t. • i ( Observe Application Precaution. Rotalicnal Crop!Grazing and Feeding Restrictions aod Replanting Instru<:lions sections 01 each products'label when using tank mixtures. COMMANO® 6 EC HERBICIDE APPLICATION FOLLOWED BY PREEMERGENCE TREATMENTS Preemergence herbicides approved for use on soyb-.1ans may be ap­ plied lollowing pr.plant incOCjlOraJed eatmenls 01 Command 6 EC alone or in lank mix combinations with Lexone or Senoor (or conlrol of addi­ tional weed species listed on the pre emergence .-;oduct labels. Read and 1o\ow the pHcaut\onary statements, directions for use, rates of application and all other information tha: appear on the product labets. 00 NOT apply Canopyk. Lexone or Sancor after a preplant incorpo­ ratRd Command 4 EC plus lexone or Sancer tank mix treatment. COMMAND" 6 EC HERBICIDE APPLICATION FOLLOWED BY POSTEMERGENCE TREATMENTS Postemergence herbicides approved for Ustl on soybeans may be ap­ plied loIio'Mng preplant in<;OCjlOrated treatments 01 Commaod 6 EC alone or in lank mix combinations With lexone or 8encor for control of emerged weeds as listed on the postemergence product labels. Read and fOllow the p:ecautionsty sta.tements, duections (Of use, rates. 01 applicalion and all other information appearing on Ihe product labets. COMMAND DRIFT CONTROL SUPPLEMENT Non-target spray drift 01 CQmmand 6 EC herbicide should be aVOided to prevent whitening of deSirable vegetation. Drift is influenced by many factors which include wind speed, spray pressure, particle sizo, noule type, and boom heighl. Selection and proper use of spn.y equipment is cntical in minimizing spray drift. Table 4 suggests pressures, flow rates, and nozzle sizes for drift reduction using various nozzte types. Table 4: Suggested nozzle types, minimum size and recommended pressure ranges for minimizing drill. Minimum Nozzle Pressure Range (PSI) Flow Rate Within Pressure Rall\ie (GPM) Minimum Nozzle Size Flat·fan LP·llar·tan Even flat-fan FlOOd Whirl-chamber Raindrop Wide all\ile full cone 15·30 10·25 15·30 10·25 5·20 15·40 15·40 0.3 0.3 0.3 0.3 0.3 0.15 0.3 • Refers to tip number such as 8004 or LF2.S. #4' l¥a #4 #2.5' #5 #2 #5 Some other drift control considerations are keeping the booms low. avclding strong (greater than 7 mph) and gusting winds, and using drift: cetnrdants. Delers Should Sell In Original Packages Only, Terms of Sale or Use: On purchase of this pcoduct buyet and user agree 10 the following conditions: Warranty: FMC makes no wananty. expressed or imptied. concerning the use of this product other than indicated on the label. Except as so warranted, the product is sold as is. Buyer and user assume all risk of use andlor handling andlor storage 01 this material when SUtll use andl or handling andlor storage is contrary to label instructions. Directions and Rec:ommenda\lons Fotlowdireclions carefully. Timing and ,.lathed of application, weather and crop condilions. mixture with other chemicals not specifically recommended and other influencing factors in the use of thiS product are beyond the control ct the seller and are assu.ned by the buyer at his own risk. Use of Product: FMC's recommendations (Of the use of this product are based upon tests believed to be reliable. The use of this product being beyond the control of the manufacturer, no guarantee, expressed or implied, is made as to the eHeets 01 s'Jch or the results to be obtaIned. if nct used in accordance wiih directions Or established sale practice. Damages! BuyaT's at usaf'S ex.clusive (emedy 10i damages for breach of warrant)' Or negligence shall be limited (0 direct damages nol ex· ceeding the purchase price paid and shall not include incidental or con· sequential damages. CANCrlY and lEXONE-E.I. duPont de Nemours Trademark SENCOR-Bayer AG Trademark Command and of'MC-FMC Trademmk$ © 1986 FMC Corporation All rights reserved (619·7187) .. 0 00' '0 • c; ••• o •• • • o '0 • o • 0 '0 0 ••• • o • o. •••••• o o. o • • ••••• o 0 ••••• o • • •••• • • ••••• • • o. •••••• o 0 ••••