crop-chem-docs/corpus/epa_ppls/279-3150.md

COMMAND 1.5 ME HERBICIDE

• EPA Reg No: 279-3150
• Registrant: FMC CORPORATION
• Signal word: Caution
• Active ingredients: Clomazone (17.8%)
• Label accepted: 2026-03-09
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000279-03150-20260309.pdf

---

March 9, 2026

Nina Marr Registration Specialist FMC Corporation c/o FMC Stine Research Center P.O. Box 30 Newark, Delaware 19714-0030

Subject: Label Amendment - Registration Review Mitigation for Clomazone Product Name: COMMAND 1.5 ME HERBICIDE EP A Registration Number: 279-3150 Case Number: 481692 Application Date: July 2, 2019

Dear Nina Marr:

The Agency, in accordance with the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), as amended, has completed reviewing all the information submitted with your application to support the Registration Review of the above referenced product in connection with the Clomazone Interim Decision, and has concluded that your submission is acceptable. The label referred to above, submitted in connection with registration under FIFRA, as amended, is acceptable.

Should you wish to add/retain a reference to the company’s website on your label, then please be aware that the website becomes labeling under the Federal Insecticide, Fungicide, and Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims made on the website may not substantially differ from those claims approved through the registration process. Therefore, should the Agency find or if it is brought to our attention that a website contains false or misleading statements or claims substantially differing from the EPA approved registration, the website will be referred to the EPA’s Office of Enforcement and Compliance Assurance.

A stamped copy of your labeling is enclosed for your records. This labeling supersedes all previously accepted labeling and must be used at your next label printing. You must

Page 2 of 2 EPA Reg. No. 279-3150 Case No. 481692

submit one copy of the final printed labeling before you release the product for shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may distribute or sell this product under the previously approved labeling for 12 months from the date of this letter. After 12 months, you may only distribute or sell this product if it bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3.

If you have any questions about this letter, please contact Concepción Rodríguez by phone at 202-566-0820, or via email at rodriguez.concepcion@epa.gov.

S i n c e r e l y ,

Julie Javier, Team Leader Risk Mitigation and Implementation Branch 4 Pesticide Re-Evaluation Division Office of Pesticide Programs

ENCLOSURE: Stamped label

WĂŐĞϭŽĨϭϱ ůŽŵĂnjŽŶĞ'ƌŽƵƉϭϯ ,ĞƌďŝĐŝĚĞ Command 1.5 ME Herbicide For Agricultural or Commercial Use Only NOT FOR SALE OR USE IN CALIFORNIA EPA Reg. No. 279-3150 EPA Est. 279- Active Ingredient: By Wt. Clomazone: ............................................................ 17.8% Other Ingredients: ................................................... 83.2% 100.0% Contains 1.5 pounds of active ingredient per gallon U.S. Patent No. 4,405,357 KEEP OUT OF REACH OF CHILDREN CAUTION Si usted no entiende la etiqueta, busque a algulen para que se la explique a usted en detalle. (If you do not understand the label, find someone to explain it to you in detail.) FIRST AID If in eyes: Flush eyes with plenty of water. Contact a medical doctor if irritation occurs and persists. If swallowed: Contact a medical doctor or Poison Control Center. Drink 1 or 2 glasses of water and induce vomiting by touching the back of throat with a finger, or by giving syrup of ipecac. Do not induce vomiting or give anything by mouth to an unconscious person. If inhaled: Remove to fresh air. If not breathing, give artificial respiration, preferably mouth-to-mouth. Get medical attention. If on skin: Wash with plenty of water. Contact a medical doctor if irritation occurs and persists. For Emergency Assistance Call (800) 331-3148 See other panels for additional precautionary information. PRECAUTIONARY STATEMENTS Hazards to Humans (and Domestic Animals) Caution Harmful if inhaled. Avoid breathing vapor or spray mist. Remove contaminated clothing and wash before reuse. Personal Protective Equipment: Applicators and other handlers must wear: Long-sleeved shirt and long pants; Chemical-resistant gloves, made of Barrier Laminate or Viton; Shoes plus socks. Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product's concentrate. Do not reuse them. Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables, use detergent and hot water. Keep and wash PPE separately from other laundry. When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d) (4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS. User Safety Recommendations: Users should: x Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. x Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. x Remove PPE immediately after handling this product. Wash outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing. Sold by FMC Corporation 2929 Walnut St. Philadelphia, PA 19104 Environmental Hazards Mar 9, 2026 279-3150

WĂŐĞϮŽĨϭϱ  Do not apply directly to water, to areas where surface water is present, or to intertidal areas below the mean high-water mark. Do not apply when weather conditions favor drift from the area treated. Do not apply where runoff is likely to occur. Do not contaminate water when disposing of equipment wash waters. Apply this product only as specified on this label.

NON-TARGET ORGANISM ADVISORY STATEMENT: This product is toxic to plants and may adversely impact the forage and habitat of non-target organisms, including pollinators, in areas adjacent to the treated site. Protect the forage and habitat of non-target organisms by following label directions intended to minimize spray drift.

Physical/Chemical Hazards Do not use or store near heat or open flame.

PRIOR TO APPLICATION Off-site movement of spray drift or vapors of command 1.5 herbicide can cause foliar whitening or yellowing of some plants. Prior to making applications, read and strictly follow all restrictions, precautions and application instructions on this label.

DIRECTIONS FOR USE It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

Do not apply this product through any type of irrigation system.

This product is for use only in a monitored commercial program conducted under FMC supervision.

Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation.

AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This Standard contains requirements for the protection of agricultural work ers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE), and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Prote ction Standard.

Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours.

Exception: if the product is soil-injected or soil-incorporated, the Worker Protection Standard under certain circumstances, al lows workers to enter the treated area if there will be no contact with anything that has been treated.

PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil or water, is: Coveralls; Chemical-resistant gloves, made of Barrier Lamina te or Viton; Shoes plus socks.

WEED RESISTANCE MANAGEMENT Command 1.5ME, which contains the active ingredient clomazone, is a group 13 herbicide based on the mode of action classification system of the Weed Science Society of America.

Proactively implementing diversified weed control strategies to minimize selection for weed populations resistant to one or mor e herbicides is a best practice. A diversified weed management program may include the use of multiple herbicides with different sites of action and overlapping weed spectrum with or without tillage operations and/or other cultural practices. Research has demonstrated that using the labeled rate and directions for use is important to delay the selection for resistance.

The continued effectiveness of this product depends on the successful implementation of a weed resistance management program.

To aid in the prevention of developing weeds resistant to this product, users should: • Scout fields before application to ensure herbicides and rates will be appropriate for the weed species and weed sizes present. • Start with a clean field, using either a burndown herbicide application or tillage. • Control weeds early when they are relatively small (less than 4 inches) with a burndown herbicide. • To minimize resistance, apply full labeled rates of Command 1.5ME. • Scout fields after application to detect weed escapes or shifts in control of weed species. • Control weed escapes before they reproduce by seed or proliferate vegetatively. • Report any incidence of non-performance of this product agains t a particular weed to your FMC representative, local retailer, or county extension agent. • Contact your FMC representative, crop advisor, or extension agent to find out if suspected resistant weeds to this MOA have been found in your region. If resistant biotypes of target weeds have been reported, use the application rates of this product specified for your local conditions. Tank mix products so that there are multiple effective sites of actions for each target weed. • If resistance is suspected, treat weed escapes with an herbicide having a site of action other than Group 13 and/or use nonchemical methods to remove escapes, as practical, with the goal of preventing further seed production.

WĂŐĞϯŽĨϭϱ  • Suspected herbicide-resistant weeds may be identified by these indicators:

• Failure to control a weed species normally controlled by the her bicide at the dose applied, especially if control is achieved on adjacent weeds;
• A spreading patch of non-controlled plants of a particular weed species; and
• Surviving plants mixed with controlled individuals of the same species.

Additionally, users should follow as many of the following herbicide resistance management practices as is practical: • Use a broad-spectrum soil-applied herbicide with other sites of action as a foundation in a weed control program. • Utilize sequential applications of herbicides with alternative sites of action. • Rotate the use of this product with non-Group 13 herbicides. • Avoid making more than two applications of Command 1.5ME and any other Group 13 herbicides within a single growing season unless mixed with an herbicide with a different site of action with an overlapping spectrum for the difficult-to-control weeds. • Incorporate non-chemical weed control practices, such as mech anical cultivation, crop rotation, cover crops and weed-free cro p seeds, as part of an integrated weed control program. • Use good agronomic principles that enhance crop development and crop competitiveness. • Thoroughly clean plant residues from equipment before leaving fields suspected to contain resistant weeds. • Manage weeds in and around fields, during and after harvest to reduce weed seed production.

PRECAUTIONS FALIURE TO OBSERVE THE GENERAL APPLICATION PRECAUTION SECTION OF THIS LABEL MAY RESULT IN INJURY TO SENSITIVE PLANTS

x Some species of trees, shrubs, flowers, agronomic crops, and fruits and vegetables are sensitive to Command 1.5 ME herbicide. x Foliar contact with spray drift or vapors may cause whitening of sensitive plants. Symptoms are generally temporary in nature but may persist on some plants. x Plants such as the following may show symptoms of foliar whitening or yellowing if contacted by Command 1.5ME herbicide.

Trees (Deciduous) Trees (Evergreen) Apple (inc. fruit & ornamental types) Fir species Ash (Green, white Mountain) Spruce species Basswood Boxelder Shrubs & Vines Catalpa Azalea Cherry (inc. fruit & ornamental types) Burningbush (Winged Euonymus) Cottonwood Grape Elm Honeysuckle Ginko Roses Hackberry Yew Mulberry Peach Agronomic Crops Pear (Inc. fruit & ornamental types) Alfalfa Pecan Oats Poplar Russian olive Vegetable and Flower Plants Tree-of Heaven Tulip tree Others Walnut trees Ferns Willow species Herbs Strawberry Raspberry Blackberry

SPRAYER CLEANUP Do not drain or flush equipment on or near des irable trees or other plants, or in areas where their roots may extend or in loca tions where the chemical may be washed or move into contact with thei r roots. Do not contaminate any body of water including irrigation water that may be used on other crops. Carefully follow sprayer clean-up instructions noted below to prevent spray tank residues from damaging other crops.

Sprayer equipment needs to be thoroughly rinsed to remove residues of herbicide that might injure other subsequently sprayed crops. The steps below need to be followed for the thorough rinsing of spray equipment following applications of Command 1.5ME herbicide or tank mixes of Command 1.5ME with other labeled products.

1. Drain any remaining spray solution from tank, pump, hoses and boom and discard in an approved manner (See Note that follows).
2. Clean tank and fittings by: • Thoroughly hosing down the inside walls of the spray tank with a quantity of water equal to 1/8 of the total tank capacity and operating the pump to circulate this solution through the sprayer system for 15 minutes. • Washing down the outside surfaces of equipment.

WĂŐĞϰŽĨϭϱ  • Removing nozzle tip and screen from end nozzle in each boom section and allowing several gallons of rinsate solution to flush completely through boom (collect rinsate while flushing). 3) Thoroughly drain remaining rinsate solution from tank, pump and hoses. Combine with boom flushing and dispose of all rinsates from this first rinsing in an approved manner (see Note that follows). • When switching from water dilutions to applications utilizing crop oil or liquid fertilizer as a carrier, a small volume of c rop oil or liquid fertilizer needs to be flushed through the tank, pump, hoses, and boom prior to the next use. Dispose of crop oil or liquid fertilizer rinsate in an approved manner (see Note for local, state and federal guidelines). 4) Remove the remaining nozzle tips, and screens and the line filter and wash in a pail of warm soapy water, thoroughly rinse and replace. 5) Hose down the inside walls of the spray tank a second time and circulate this solution using the same procedure as noted in #2 above. 6) If the next use of the sprayer will be for applying a preemergent or preplant incorporated pesticide on any crop for which Command 1.5ME is registered, rinsate from this second rinsing may be utilized by diluting with the water for the next pesticide load. HOWEVER If the next use of the sprayer will be a postemergence applied pest icide on any crop, drain rinsate solution from this second r insing. Retain rinsate solution for use only with a soil incorporated pesticide to be applied on a crop for which Command 1.5ME is registered. Refill tank (after draining second rinsate solution) in accordance with postemergence product label directions.

NOTE: Dispose of excess spray mixture and/or rinsate from first tank rinsing by application to cropland as described on this label. If excess spray mixture and/or rinsate from first rinsing cannot be disposed of according to label instructions, dispose of in compliance with local, state and federal guidelines. Contact your state pesticide or Environmental Control Agency or the Hazardous Waste representative at the nearest EPA regional office for guidance.

GENERAL MIXING INSTRUCTIONS Care must be taken when mixing Command 1.5ME herbicide. Avoid mixing in areas adjacent to desirable plants (See Section headed "IMPORTANT")

Command 1.5ME Alone: Mix Command 1.5ME with water or liquid fertil izer in the following manner: Fill the spray tank one-half to three fourths full with water or liquid fertilizer, add the proper amount of Command 1.5ME, then add the rest of the water or l iquid fertilizer. Provide sufficient agitation during mixing and application to maintain a uniform spray mixture.

Tank Mixtures: Fill spray tank one-fourth to one-third full with water; with agitator operating add the specified amount of ingredients using the following order: dry formulations (e.g., wettable powders, dry flowables) first, liquid suspensions (e.g., flowables) next and finally liquids (e.g., EC's). Mix thoroughly and fill tank one-half full continuing agitation. Add Command 1.5ME herbicide to tank while maintaining agitation. Complete filling the sprayer tank with water. Where use of a surfactant is specified, add as the last ingredient to the spray tank. Maintain agitation during filling, mixing and application. When using drift reducing agents, follow specific product label instructions for order of addition to spray tank. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. If the instructions on the tank mix partner label conflict with this Command 1.5ME herbicide label, do not use in a tank mixture w ith Command 1.5ME herbicide.

Fertilizer Spray Mixtures: Applications of Command 1.5ME alone or with tank mixtures, in Conjunction with fertilizer solutions may beused unless use directions specifically state otherwise. Small quantities need to be tested for compatibility by the following procedure before mixing tankful quantities.

1. Put 1 pint of fertilizer solution in a quart jar.
2. Add the appropriate amount of herbicide based on the table at the top of page 3. If more than one product is to be used, add each separately using the following sequence: dry formulations (e.g., wettable powders, dry flowables) first, liquid suspensions (e g., flowables) next and finally liquids (e.g., EC's).

Herbicide Rate/Acre Amount to Be Added per Pint of Fluid Fertilizer* Wettable Powders or Dry Flowables (Dry Granules) ½ pound 1 pound 2 pounds 3 pounds ¾ level teaspoon 1 ½ level teaspoon 3 level teaspoons 4 ½ level teaspoons Emulsifiable Concentrates Or

Flowables 1 pint 1 quart

½ level teaspoon 1 level teaspoon

2 level teaspoons 3 level teaspoons x Based on a spray volume of 25 gpa. For lower or higher spray volumes, adjust fluid fertilizer quantity accordingly. 3) Close jar and shake well. 4) Watch mixture for several seconds, again in 5 minutes and again after 30 minutes. If herbicide/fertilizer combination remains mixed or can be remixed readily (i.e., does not permanently separate, foam, gel or become lumpy), the mixture is compatible and can be mixed in full volumes and sprayed. If the mixture is compatible, prepare spray by adding fertilizer solution to the tank first, then follow directions noted below:

1. Command 1.5ME Alone: Dilute with 2 parts of water and add slowly to spray tank of fertilizer with agitator running. Maintain agitation during application.

WĂŐĞϱŽĨϭϱ  2) Command 1.5ME plus Tank Mixtures: Dilute individual products with two (2) parts of water, then add to the spray tank of fertilizer, while maintaining agitation, using the following order-slurry of dry formulations (wettable powders, dry flowables) first, dilu ted liquid formulations {EC's, flowables) second. Continue agitation during application.

RESTRICTIONS Do not apply aerially or through irrigation equipment.

For Preemergent Applications: Command 1.5ME must be used as a preemergent soil applied treatment without incorporation. Application restrictions must be taken as follows: Do not apply Command 1.5ME herbicide to non-field areas including fence rows, waterways, ditches, and roadsides. Do not apply within 300 feet of downwind crops and other desirable non-target plants. Do not apply within 1,200 feet of Towns and Housing Develo pments, Commercial Fruit, Nut, or Vegetable Production¹, Commercial Greenhouses or Nurseries. ¹ Except for vegetable crops registered for use on the Command 1.5ME label.

Refer to individual crop use directions for additional requirements.

DEdKZz^WZzZ/&dDE'DEd͗ Ground Boom Applications: • User must only apply with the nozzle height recommended by t he manufacturer, but no more than 4 feet above the ground or crop canopy. • Applicators are required to use a Coarse or coarser droplet size in accordance with the most current version of the American Society of Agricultural & Biological Engineers Standard 572 (ASAE S572). • Do not apply when wind speeds exceed 15 miles per hour at the application site. • Do not apply during temperature inversions.

SPRAY DRIFT ADVISORIES THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT. BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS.

IMPORTANCE OF DROPLET SIZE An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide target pest control. While applying larger droplets will reduce spray drift, the potential for drift will be greater if applications are made improperly or under u nfavorable environmental conditions.

CONTROLLING DROPLET SIZE – GROUND BOOM • Volume - Increasing the spray volume so that larger droplets are produced will reduce spray drift. Use the highest practical spray volume for the application. If a greater spray volume is needed, consider using a nozzle with a higher flow rate. • Pressure - Use the lowest spray pressure recommended for the nozzle to produce the target spray volume and droplet size. • Spray Nozzle - Use a spray nozzle that is designed for the intended application. Consider using nozzles designed to reduce drift.

BOOM HEIGHT – GROUND BOOM Use the lowest boom height that is compatible with the spray nozzles that will provide uniform coverage. For ground equipment, the boom should remain level with the crop and have minimal bounce.

SHIELDED SPRAYERS Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify that the shields are not interfering with the uniform deposition of the spray on the target area.

TEMPERATURE AND HUMIDITY When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation.

TEMPERATURE INVERSIONS Drift potential is high during a temperature inversion. Temperatur e inversions are characterized by increasing temperature with altitude and are common on nights with limited cloud cover and light to no wind. The presence of an inversion can be indicated by ground fog or by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing. Avoid applications during temperature inversions.

WIND Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND CONDITIONS. Applicators need to be familiar with local wind patterns and terrain that could affect spray drift.

RESTRICTIONS Non-target spray drift of Command 1.5ME herbicide must be avoided to prevent whitening of desirable plants. Drift is influenced by many factors which include wind speed, spray pressure, particle size, nozzle type, and boom height. The use of an

WĂŐĞϲŽĨϭϱ  agriculturally approved drift reducing additive is advised. Follow specific product label instructions for the order of addition of all products to the spray tank. Small quantities need to be tested for compatibility before mixing tankful quantities. x A minimum spray volume of 10 gallons per acre is require d with appropriate nozzle types and sizes that produce coarser sprays. x Do not exceed 30 psi spray pressure. x When moving spray equipment to noncontiguous sites, do not allow spray solution to spray or drip from tanks, hoses, fittings or spray nozzles and tips.

Suggested Nozzle Types, Minimum Size and Pressure Ranges for Minimizing Drift (See Special Precautions in the cotton use section for further restrictions) x Selection and proper use of spray equipment is critical in mini mizing spray drift. The following table suggests pressures, flow rates, and nozzle sizes for drift reduction using various nozzle types. Nozzle Pressure Range (PSI) Minimum Flow Rate Within Pressure Range (GPM) Minimum Nozzle Size Flat-fan 15-30 0.3 #4* LP-flat-fan 10-25 0.3 #3 Even flat-fan** 15-30 0.3 #4 Flood 10-25 0.3 #2.5* Whirl-chamber 5-20 0.3 #5 Raindrop 15-30 0.15 #2 Wide angle full cone 15-30 0.3 #5

• Refers to tip number such as 8004 or LF2.5. ** Used for banded application.

ROTATIONAL CROPPING PRECAUTIONS Under some conditions, temporary whitening or yellowing of leaves may occur on approved rotational crops where undesirable soil residues of Command 1.5ME exist.

Under abnormal conditions, carryover injury to rotational crops can occur. The following factors can contribute to increased risk of injury to rotational crops:

1. Exceeding label required rates.
2. Overapplication resulting from use of worn nozzles, excessiv e overlapping of spray swaths, failing to shut off spray booms when turning (end row areas), or slowing or stopping sprayer.
3. Soil with pH less than or equal to 5.9.
4. Extreme dryness in the four months following application.,
5. Use of organophosphate soil insecticide followed by use of some postemergence corn herbicides.
6. Choice of rotational crop hybrid.

Additional instructions to prevent rotational crop injury may be provided in the form of service bulletins for location where risk of injury is significantly increased due to extremely dry conditions.

Refer to Rotational Crop Guidelines and Replanting Instructions of specific crops for additional crop planting information.

SPECIAL PRECAUTION Off-site movement of spray drift or vapors of Command 1.5ME herbicide can cause foliar whitening or yellowing of some plants. Prior to making applications read and strictly follow all precautions and application instructions on this label.

GENERAL APPLICATION INSTRUCTIONS Ground Applications Broadcast or Banded Applications: Apply Command 1.5ME alone or in tank mix combinations by ground equipment using a finished spray volume of 10 to 40 gallons of water per acre. NOTE: The use of an agriculturally approved drift reducing additive is advised. Use nozzles suitable for broadcast boom or banded application of herbicides. Coarse sprays are less likely to drift out of the target area than fine sprays. For Command 1.5ME tank mixtures with wettable powder or dry flowable formulations, nozzle screens and strainers need to be no finer than 50-mesh. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels invo lved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.

Banded Applications-Calculate the rates and volumes required by using the following formulas:

Band width in inches Row width in inches X Broadcast Rate Per Acre = Band rate per acre

Band width in inches Row width in inches X Broadcast Volume Per Acre = Band volume per acre

WĂŐĞϳŽĨϭϱ  Cultivation After Planting Soil treated with Command 1.5ME may be shallow-cultivated, rotary hoed or hand-hoed without reducing the weed control activity of Command 1.5ME. Avoid deep cultivation which may bring untreated soil to the surface and result in poor weed control.

COMMERCIAL IMPREGNATION AND APPLICAT ION OF COMMAND 1.5ME ON DRY BULK FERTILIZERS Command herbicide may be impregnated on dry bulk fertilizers. When applied as directed Command/dry bulk fertilizer mixtures provide weed control equal to that provided by the same rates of Command applied in water.

Impregnation: Apply using a minimum of 200 pounds of dry bulk fertilizer per acre and up to a maximum of 450 pounds per acre with the specified amount of Command 1.5ME herbicide per acre. Use a closed rotary-drum mixer or a similar type of closed blender equipped with suitable spray equipment. The spray nozzle(s) needs to be positioned to provide a uniform, fine spray pattern over the tumbling fertilizer for thorough coverage. The physical properties of fertilizers vary, particularly in liquid absorptive capac ity. When absorptivity is sufficient, simple spray impregnation of the fertilizer with Command provides a satisfactory, dry mixture. If the absorptive capacity is inadequate use of a highly absorptive powder is required to provide a dry, flowable mixture. Microcel E (Johns-Manv ill Products Corporation) is a suggested absorbent powder. General ly, less than 2% by weight of Microcel E is required. DO NOT impregnate Command 1.5ME onto straight coated ammonium nitrate or st raight limestone because these materials will not absorb the herbicide. Dry fertilizer blends containing mixtures of ammonium nitrate or limestone may be impregnated with Command.

The amount of Command actually required in the preparation of individual fertilizer mixtures needs to be determined carefully for each production operation. This is necessary to ensure that the amount of pesticide actually contained in the mixture applied to the soil represents the correct rate of use. Bulk fertilizer impregnated with Command 1.5ME herbicide needs to be applied immediately, n ot stored. All state regulations, labeling, etc., of the mixtures are the responsibility of the seller. For those rates not listed in the following table, calculate the amount of Command to be impregnated on a ton of dry bulk ferti lizer using the following formula:

2000 Pounds dry fertilizer per acre x PINTS of Command per acre (rate for soil texture) = PINTS of Command per ton of fertilizer

RATE CHART FOR IMPREGNATION OF DRY BULK FERTILIZERS WITH COMMAND 1.5ME HERBICIDE PINTS OF COMMAND 1.5ME PER TON OF FERTILIZER

Fertilizer Rate Command 1.5ME Rate Per Acre (Lbs./Acre) 4.0 PT. (.75 lbs AI) 5 1/3 PT. (1 lb. AI) 6 2/3 PT. (1.25 lbs. AI) 200 40 53 1/3 66 2/3 250 32 42 2/3 53 1/3 300 26 2/3 35 ½ 44 ½ 350 22 2/3 30 ½ 38 400 20 26 2/3 33 1/3 450 17 ¾ 23 2/3 29 2/3

If fertilizer materials are excessively dusty, use diesel oil or other suitable additive to reduce dust prior to impregnation a s dusty fertilizer will result in poor distribut ion during application. Crop injury and/or poor weed control may occur where the impreg nated fertilizer is not uniformly applied.

PRECAUTIONS FOR DRY BULK FERTILIZER IMPR EGNATION AND APPLICATION WITH COMMAND 1.5ME

• All equipment used to apply Command 1.5 ME must be thoroughly cleaned immediately following use to ensure no contamination results which could cause inju ry to non-labeled crops or desirable vegetation. Refer to "Sprayer Cleanup" section for additional details and disposal of rinsates. • Equipment used to physically transport Command 1.5 ME treat ed fertilizer, including boots, augers, conveyers, bins, etc. must be covered to prevent loss of fine particles and subjected to cleanup procedures previously described. • Mixing of Command herbicide and dry fertilizer must be conduct ed in a blender which will ensure that airborne particles and potential for volatilization are avoided. • Bulk containers must be tightly covered while the product is being transported and applied to reduce chances of Command volatilization or product loss.

Restriction: Dry Bulk Fertilizer impregnation operations using Command 1.5ME must not be conducted within ¼ mile of residential areas or areas where Command 1.5ME symptomology on desirable vegetation would not be tolerated.

WĂŐĞϴŽĨϭϱ  COMMAND 1.5ME GEOGRAPHICAL AREAS For Rates, Weed Control, and Crop Rotation

• Southern area includes Missouri bootheel which incorporates the following counties: Butler, Dunklin, Mississippi, New Madrid, Pemiscot, Scott, and Stoddard.

COTTON GENERAL INFORMATION Command 1.5ME Herbicide may be applied, as a preemergent banded or broadcast treatment in conventional tillage or conservation tillage systems for the control of annual grasses and broadleaf weeds in cotton. Do not incorporate Command 1.5 ME or use in a tank mixture with any herbicide that requires soil incorporation.

PRECAUTIONS FOR COTTON Off-site movement of spray drift or vapors of Command® 1.5ME he rbicide can cause foliar whitening or yellowing of some plants. Prior to making applications read and strictly follow all precautions and application instructions on the label.

Restrictions for Cotton Applications:

Completion of proper qualification training required for sale, purchase, and use. Do not apply aerially or through irrigation equipment. Applicators must observe all buffer restrictions.

The use of an agriculturally approved drift reducing additive is advised. Follow specific product label instructions for the order of addition of all products to the spray tank. Small quantities need to be testes for compatibility before mixing tankful quantities. Do not exceed 30 psi spray pressure.

Do not apply with nozzles other than flood, whirl chamber, or Raindrop® or similar tips that produce coarse sprays. Refer to n ozzle table under SPRAY DRIFT PRECAUTIONS.

REQUIREMENTS FOR PLANTING TIME APPLICATIONS DO NOT apply Command 1.5ME Herbicide to cotton unless either disulfoton or phorate organophosphate insecticide is applied in- furrow with the seed at planting time at a minimum of 0.75 pound per acre of active ingredient. Do not reduce the application rate of the organophosphate insecticide when Command 1.5ME herbicide is applied as a banded treatment. Failure to apply either disulfoton or phorate insecticides with Command in accordance with in-furrow label use directions can result in crop phytotoxicity (bleach ing) and/or stand reduction. Combinations of at planting systemic granular carbamate and organophosphate insecticides in conjunction with Command may result in injury to cotton. Crop injury may occur with higher Command rates on sandy soils. Diuron must not be used at planting when Command is used as p lant injury may result. Refer to the inse cticide product labels for appropriate in-fu rrow application directions and maximum use rates. Monitor applicat ion equipment to ensure accurate and uniform placement of the insecticide.

PREEMERGENT BANDED APPLICATIONS For preemergent banded treatments, refer to the directions for banded applications in the GENERAL APPLICATION INSTRUCTIONS section.

WĂŐĞϵŽĨϭϱ  REPLANTING INSTRUCTIONS If the initial planting of cotton fails to produce a uniform stand, cotton may be replanted in fields treated with Command 1.5ME alone. Do not retreat fields with a second application of Command 1.5ME. When tank mixing with a labeled product, refer to the replant instructions for that product. Do not replant treated fields with any crop at intervals that are inconsistent with the ROTATIONAL CROP GUIDELINES on the Command 1.5ME label. Where a tank mix is us ed, refer to the product's labels for any additional replant instructions.

If replanting is required, follow the directions under REQUIREMENTS FOR PLANTING TIME APPLICATIONS noted above.

Command 1.5ME Herbicide Applied Alone RATES AND WEEDS CONTROLLED1

2 2/3 PT.2/A Command 1.5ME 4.0 PT. /A Command 1.5ME 5 1/3 PT. /A Command 1.5ME 6 2/3 PT. /A Command 1.5ME (0.50 LB. AI/A) (0.75 LB AI/A) (1.0 LB. AI/A) (1.25 LB. AI/A) GRASSES GRASSES GRASSES GRASSES Suppression of some annual grasses Barnyardgrass All grasses controlled at 1.5 pints (0.28 lb. ai/A) plus All grasses controlled at 2.0 pints (0.375 lb. ai/A) plus: Broadleaf Signalgrass Cupgrass

-South-western -Wooly Foxtail

-Purple -Robust -Yellow Crabgrass

-Large -Smooth Field Sanbur Junglerice* Foxtail

-Giant -Green Bermudagras* Shattercane* Goosegrass Red Rice* Wild Proso Panicum

-Common -Fall -Texas Itchgrass3 Millet* Seedling Johnsongrass Field Sandbur*

2 2/3 PT.2/A Command 1.5ME 4.0 PT. /A Command 1.5ME 5 1/3 PT. /A Command 1.5ME 6 2/3 PT. /A Command 1.5ME (0.50 LB. AI/A) (0.75 LB AI/A) (1.0 LB. AI/A) (1.25 LB. AI/A) BROADLEAVES BROADLEAVES BROADLEAVES BROADLEAVES Velvet leaf Velvetleaf All broadleaves controlled at 1.5 pints (0.28 lb. ai/A) plus: All broadleaves controlled at 2.0 pints (0.375 lb. ai/A) plus: Spurred Anoda Spurred Anoda Cocklebur Balloonvine* Plus: Common Ragweed Black Nightshade* Common Ragweed* Dayflower Curly Dock Jimsonweed* Florida Beggarweed Joint Vetch* Lambsquarter Florida Pusley Kochia Pennsylvania Smartweed Jimsonweed Morningglory -pitted Prickly Sida Kochia* Pennsylvania Smartweed Purslane Redvine* Pigweed

-Redroot* -Smooth Redweed Tropic Croton Venice Mallow Wild Poinsettia4

*Partially Controlled 1 Higher label rates (a minimum of 5 1/3 pints per acre (1.0 lb. ai/A) are advised for fields that have previously been in conservation programs, or where heavy weed pressure is anticipated. Select lower to higher rates based on lighter to heavier soil types. For fields that have previously been in conservation programs, a minimum application rate of 6 2/3 pints per acre (1.25 lb. ai/A) for cocklebur or common ragweed control needs to be used. 2For heavy weed pressure or heavy soils use 5 1/3 pints per acre (1.0 lb. ai/A) to control Velvetleaf or Spurred Anoda. 3For control of itchgrass, do not incorporate Command 4 EC. For high weed pressure and heavy soils use 6 2/3 pints (1.25 lb. ai/A). 4 Use In AR/LNMS/TX/OK only-for high pressure and heavy soils use 6 2/3 pints (1.25 lb. ai/A).

COMMAND 1.5ME HERBICIDE MAY BE APPLIED WITH OTHER PREEMERGENT HERBICIDES REGISTERED FOR THESE USES ON COTTON. Command 1.5ME may be applied in combination with other herbicides registered for use in cotton to broaden the weed control spectrum. Refer to the labels of the other herbicides for additional information. Carefully observe all application precautions, rotational guidelines and replanting instructions of each product's label when using tank mixtures.

WĂŐĞϭϬŽĨϭϱ  ROTATIONAL CROP GUIDELINES Rotate to crops as listed below, otherwise crop injury may occu r. Refer to sections headed “Rotational Cropping Precautions” an d "General Information." Note: When using Command 1.5ME with other registered herbicides al ways refer to rotational restrictions and precautions on the other product's label.

2 2/3 PT./A Command 1.5ME 4.0 to 5 1/3 PT./A Command 1.5ME 6 2/3 PT./A Command 1.5ME (0.50 LB. AI/A) (0.75 to 1.0 LB. AI/A) (1.25 LB. AI/A) ANYTIME ANYTIME ANYTIME Cotton* Cotton* Cotton* Soybeans Soybeans Soybeans Peppers Pumpkins Pumpkins Peppers Peas

9 MONTHS 9 MONTHS 9 MONTHS Corn -Field -Pop -Seed -Sweet Same as 2 2/3 pints (0.50 lb. ai/A), plus: Peas Same as 4.0 to 5 5/3 (0.75 to 1.0 lb. ai/A) Pints, plus Pumpkins Cotton Cucurbits Dry Beans Peanuts Potatoes Pumpkins Rice Snap Beans Sorghum Sugar Beets Tobacco Tomatoes (Transplanted)

12 MONTHS 12 MONTHS 12 MONTHS All crops All crops All crops Cover crops, however, may be planted anytime but stand reductions may occur in some areas. Do not graze or harvest for food or feed cover crops planted less than 9 months after Command 1.5ME treatment.

*Refer to the section "Requirements for Planting lime Applications" and "Replanting Instructions."

RESTRICTIONS Do not apply Command within 65 days of harvest. Do not apply more than 1.25 pounds active ingredient per acre per season. Do not allow livestock to graze on treated cotton forage or trash, or feed treated cotton forage or trash to livestock.

SOYBEANS GENERAL INFORMATION Command 1.5ME herbicide may be utilized as a preemergent soil applied treatment for the control of annual grass and broadleaf weeds in soybeans. Command 1.5ME herbicide may be tank mixed with other preemergent soybean herbicides to broaden the weed control spectrum compared to the products applied alone. I t is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. If the instructions on the tank mix partner label conflict with this Command 1.SME herbicide label, do not use in a tank mixture with Command 1.SME herbicide.

Water or liquid fertilizer may be used as a carrier for Comman d 1.5ME when applied alone, or when tank mixed with the herbicide s listed above, unless use directions specifically state otherwise.

REPLANTING INSTRUCTIONS If initial seeding of soybeans fails to produce a stand, soybeans ma y be replanted in fields treated with Command 1.5ME alone ( or with tank mixtures). DO NOT retreat field with a second applic ation of Command 1.5ME. When tank mixing with a labeled product refer to the soybean replant instructions for that product. DO NOT replant treated fields with any crop at intervals which are inconsistent with the Rotational Crop Guidelines on this label.

WĂŐĞϭϭŽĨϭϱ  Northern Area-See Map COMMAND® 1.5ME HERBICIDE APPLIED ALONE RATES AND WEEDS CONTROLLED1

2 2/3 PT.2 /A Command 1.5ME 4.0 PT./A Command 1.5ME 5 1/3 PT./A Command 1.5ME (0.50 LB. AI/A) (0.75 LB. AI/A) (1.0 LB. AI/A) GRASSES GRASSES GRASSES Suppression of some annual grasses Bamyardgrass Crabgrass -Large -Smooth Field Sandbur Foxtail -Giant -Green -Robust -Yellow Goosegrass Panicum -Common -Fall -Texas Seedling Johnsongrass* All grasses controlled at 4.0 pints (0.75 lb. ai/A plus: Berrnudagrass* Broadleaf Signalgrass Cupgrass -Southwestern -Woolly* Seedling Johnsongrass Shattercane• Wild Proso Millet* BROADLEAVES BROADLEAVES BROADLEAVES Velvetleaf Spurred Anoda Velvetleaf Spurred Anoda plus: Common Ragweed* Galinsoga Jimsonweed* Lambsquarters Prickly Sida Purslane Smartweed* -Ladysthumb* -Pennsylvania* Venice Mallow All broadleaves controlled at 4.0 pints (0.75 lb. ai/A) plus: Black Seeded Plantain Cocklebur* Common Ragweed Jimsonweed Kochia Smartweed -ladysthumb -Pennsylvania Tropic Croton *Partially Controlled 1 Higher label rates (a minimum of 5 1/3 pints per acre, 1.0 lb. ai/A) are recommended for fields that have previously been in conservation programs, or where heavy weed pressure is anticipated. Select lower to higher rates based on lighter to heavier, oil types. 2For heavy weed pressure or heavy soils use 3 1/3 pints per acre (0.63 lb. ai/a) to control Velvetleaf or Spurred Anoda. NOTE: When using Command 1.5ME more than 30 days prior to planting, the highest label rate needs be used.

ROTATIONAL CROP GUIDELINES Rotate to crops as listed below, otherwise crop injury may occur. Refer to sections headed "Rotational Cropping Precautions• and "General Information." NOTE: When using Command 1.5ME with other registered herbicides always refer to rotational restrictions and precautions on the other product's label.

2 2/3 PT.2/A Command 1.5ME (0.50 LB. AI/A) 4.0 PT./A Command 1.5ME (0.75 LB. AI/A) 5 1/3 PT./A Command 1.5ME (1.0 LB. AI/A) ANYTIME ANYTIME ANYTIME Soybeans Cotton* Peppers Pumpkins Peas Soybeans Cotton* Peppers Pumpkins Soybeans Cotton• Peppers Pumpkins 9 MONTHS 9 MONTHS 9 MONTHS Com

-Field -Pop -Seed -Sweet Cotton Cucurbits Dry Beans Peanuts Peppers Same as 2 2/3 pint/A (0.50 lb.ai/A), plus: Peas Same as 4.0 pints/A (0.75 lb. ai/A), except Seed Com and Sweet Corn require a 12- month rotation.

WĂŐĞϭϮŽĨϭϱ  Potatoes Rice Snap Beans Sorghum Sugar Beets Sweet Potatoes Tobacco Tomatoes (Transplanted) *Refer to the “Requirements for Planting Time Applications” and “Replanting Instructions” in the Cotton Directions for Use section. 2 2/3 PT.2 /A Command 1.5ME (0.50 LB. AI/A) 4.0 PT./A Command 1.5ME (0.75 LB. AI/A) 5 1/3 PT./A Command 1.5ME (1.0 LB. AI/A) 12 MONTHS 12 MONTHS 12 MONTHS Cabbage Tomatoes (all) Wheat Same as 2 2/3 pint (0.50 lb. ai/A). Same as 4.0 pints (0.75 lb. ai/A, plus: Seed Com Sweet Com 16 MONTHS 16 MONTHS 16 MONTHS All crops All crops All Crops Cover crops, however, may be planted anytime but stand reductions may occur in some areas. Do not graze or harvest for food or feed cover crops planted less than 9 months after Command 1.5ME treatment. Do not allow livestock to graze on treated soybean vines or feed treated vines or vine trash to livestock.

Southern Area-See Map COMMAND® 1.5ME HERBICIDE APPLIED ALONE RATES AND WEEDS CONTROLLED1 2 2/3 PT.2/A Command 1.5ME (0.50 LB. AI/A) 4.0PT. /A Command 1.5ME (0.75 LB. AI/A) 5 1/3 PT. /A Command 1.5ME (1.0 LB. AI/A) 6 2/3 PT. /A Command 1.5ME (1.25 LB. AI/A) GRASSES GRASSES GRASSES GRASSES Suppression of some annual grasses Barnyardgrass Broadleaf Signalgrass Crabgrass -South -North Foxtail -Giant -Green Goosegrass Panicum -Common -Fall -Texas Seeding Johnsongrass Field Sandbur* All grasses controlled at 4.0 pints/A (0.75 lb. ai/A) plus: Cupgrass -Southwestern -Wooly Field Sandbur Bermudagrass* Red Rice Itchgrass3 All grasses controlled at 5 1/3 pints/A (1.0 lb. ai/A) plus: Foxtail -Purple -Robust -Yellow Junglerice* Shattercane* Wild Proso Millet* BROADLEAVES BROADLEAVES BROADLEAVES BROADLEAVES Velvetleaf Spurred Anoda Velvetleaf Spurred Anoda Plus: Common Ragweed* Jimsonweed* Lambsquater Pennsylvania Smartweed* Prickly Sida Purslane Redweed Venice Mallow All broadleaves controlled at 4.0 pints/A (0.75 lb. ai/A) plus: Cocklebur Common Ragweed Dayflower Florida Beggarweed Florida Pusley Jimsonweed Kochia* Redvine* Tropic Croton Wild Poinsettia4 All broadleaves controlled at 5 1/3 pints/A (1.0 lb. ai/A) plus: Balloonvine* Black Nightshade* Curly Dock Joint Vetch* Kochia Morningglory -pitted Pennsylvania Smartweed Pigweed -Redroot* -Smooth* Prostrate Spurge

• Partially Controlled 1 Higher label rates (a minimum of 5 1/3 pints per acre, 1.0 lb. ai/A) are specified for fields that have previously been in conservation programs, or where heavy weed pressure is anticipated Select rower to higher rates based on lighter to heavier soil types. For fields that have previously been in conservation programs, a minimum application rate of 6 2/3 pints per acre (1.25 lb. ai/A) for cocklebur or common ragweed control is specified. 2 For heavy weed pressure or heavy soils use 3 1/3 pints per acre (0.63 lb. ai/A) to control Velvetleaf or Spurred Anoda. 3 For control of ltchgrass, do not incorporate Command 1.5ME. For high weed pressure and heavy soils use 6 2/3 pints per acre (1.25 lb. ai/A). 4 Use in AR/LA/MS/TX/OK only for high pressure and heavy soils use 6 2/3 pints per acre (1.25 lb. ai/A). NOTE: When using Command 1.5ME more than 30 days prior to planting, the highest label rate needs be used.

WĂŐĞϭϯŽĨϭϱ  ROTATIONAL CROP GUIDELINES

Rotate to Crops as listed below, otherwise crop injury may occur.

Refer to sections headed "Rotational Cropping Precautions" and "General Information." NOTE: When using Command 1.5ME with other registered herbicides always refer to rotational restrictions and precautions on the other product's label.

2 2/3 PT./A Command 1.5ME (0.50 LB. AI/A) 4.0 to 5 1/3 PT/A Command 1.5ME (0.75 to 1.0 LB. AI/A) 6 2/3 PT. /A Command 1.5ME (1.25 LB. AI/A) ANYTIME ANYTIME ANYTIME Soybeans Cotton*

Peppers Pumpkins Peas Soybeans Cotton*

Peppers Pumpkins Soybeans Cotton*

9 MONTHS 9 MONTHS 9 MONTHS Com

-Field -Pop -Seed -Sweet Cotton Cucurbits Dry Beans Peanuts Potatoes Pumpkins Rice Snap Beans Sorghum Sugar Beets Sweet Potatoes Tobacco Tomatoes (Transplanted) Same as 2 2/3 pints/A (0.50 lb/A), plus: Peas Same as 4.0 to 5 1/3 pints /A (0.75 to 1.0 lb. ai/A), plus: Pumpkins 12 MONTHS 12 MONTHS 12 MONTHS All crops All crops All crops

Cover crops, however, may be planted anytime but stand reductions may occur in some areas. Do not graze or harvest for food or feed cover crops planted less than 9 months after Command 1.5ME treatment. Do not allow livestock to graze on treated soybean vines or feed treated vines or vine trash to livestock. • Refer to the "Requirements for Planting Time Applications" and "Replanting Instructions" in the Cotton Directions for Use section.

COMMAND® 1.5ME HERBICIDE APPLIED IN COMBINATIONS FOR SOYBEANS Command 1.5ME herbicide may be tank mixed with other soybean herbicides to broaden the weed control spectrum compared to the products applied alone. FMC makes no claims as to weed control for any combination of rates or products other than as specified in this label. Please check with your dealer for more recent FMC technical bulletins and label supplements. When applying mixtures of Command 1.5ME with other herbicides, it is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. If the instructions on the tank mix partner label conflict with this Command 1.5ME herbicide label, do not use in a tank mixture with Command 1.5ME herbicide.

WĂŐĞϭϰŽĨϭϱ  CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY Notice: Read the entire Directions for Use and Conditions of Sale and Limitation of Warranty and Liability before buying or using this product. If the terms are not acceptable, return the product at once, unopened, and the purchase price will be refunded. The Directions for Use of this product must be followed carefully. It is impossible to eliminate all risks inherently associate d with the use of this product. Crop injury, ineffectiveness, or other unintended consequences may result because of such factors as man ner of use or application, weather or crop conditions beyond the control or FMC or Seller. To the extent consistent with applicable law, all such risks shall be assumed by Buyer and User, and, to the extent consistent with applicable law, Buyer and User agree to hold FMC and Seller harmless for any claims relating to such factors. Seller warrants that this product conforms to the chemical de scription on the label and is reasonably fit for the purposes stated on the Directions for Use when used in accordance with the directions unde r normal conditions of use. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, FMC MAKES NO WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE, NOR ANY OTHER EXPRESS OR IMPLIED WARRANTIES WITH RESPECT TO THE SELECTION, PURCHASE, OR USE OF THIS PRODUCT. Any warranties, express or implied, having been made are inapplicable if this product has been used contrary to label instructions, or under abnormal conditions, or under conditions not reasonably foreseeable to (or beyond the control of) seller or FMC, and, to the extent permitted by applicable law, buyer assumes the risk of any such use. To the extent consistent with applicable law, FMC or seller s hall not be liable for any incidental, consequential or special da mages resulting from the use or handling of this product. TO TH E EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY OF FMC AND SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES (INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SHALL BE THE RETURN OF THE PURCHASE PRICE OF THE PRODUCT OR, AT THE ELECTION OF FMC OR SELLER, THE REPLACEMENT OF THE PRODUCT. This Condition of Sale and Limitation of Warranty and Liability may not be amended by any oral or written agreement.

WĂŐĞϭϱŽĨϭϱ 

D-4240 030526

COMMAND and FMC Trademarks of FMC Corporation

FMC Corporation, 2929 Walnut Street, Philadelphia, PA 19104 © 2024 FMC Corporation. All rights reserved.

STORAGE AND DISPOSAL Do not contaminate water, food, or feed by storage or disposal. Pesticide Storage STORE ABOVE -4ºF TO KEEP PRODUCT FROM FREEZING. If frozen, thaw before use. Observe recirculation directions under Mixing and Handling Instructions for Bulk/Mini-Bulk Containers. Keep out of reach of children and animals. Store in original containers only. Store in a dry place. Carefully open containers. After partial use, replace lids and close tightly. Do not put concentrate or dilute material into food or drink containers. In case of spill, avoid contact, isolate area and keep out animals and unprotected persons. Confine spills. Call CHEMTREC (Transportation and spills): (800) 424-9300 To confine spill: Dike surrounding area or absorb with sand, cat litter or commercial clay. Place damaged package in a holding container. Identify contents. Pesticide Disposal Pesticide wastes are toxic. Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of Federal law. If these wastes cannot be disposed of by use according to label instructions, contact your State Pesticide or Environmental Control Agency or the Hazardous Waste representative at the nearest EPA Regional Office for guidance. Container Handling Plastic Non-refillable Containers: Do not reuse or refill this container. Trip le rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining content s into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Fill the container ¼ full with water and recap. Shake for 10 seconds. Pour rin sate into application equipment or a mix tank or store rinsate for la ter use or disposal. Drain for 10 seconds after the flow begin s to drip. Repeat this procedure two more times. Then offer for recycling or reconditioning, or puncture and dispose of in a sanit ary landfill or by incineration, or, if allowed by State and local authorities, by burning. If burned, stay out of smoke. Returnable/Refillable Sealed Containers: Refill this container with pesticide only. Do not reuse this container for any other purpose. Do not rinse container. Do not empty remaining formulated product. Do not break seals. Return intact to point of purchase. Cleaning the container before f inal disposal is the responsibility of the person disposing of the container. Cleani ng before refilling is the responsibility of the refiller. To clean the container before final disposal, empty the remaining contents from this container into application equipment or mix tank. Fill the c ontainer about 10 percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat rinsing procedure two more times. Mini-Bulk Containers: These containers are property of FMC Corporation and are returnable to FMC at FMC’s discretion. These containers are provided for repackaging of Command 1.5ME* and must not be filled with any other product. Bulk Drums: Command 1.5ME Bulk drums are returnable to FMC Corporation for reuse when the container is completely empty. Bulk drums containing product in excess of 1 gallon cannot be accepted for return. Container Precautions Before refilling, inspect thoroughly for damage such as cracks, punctures, bulges, dents, abrasions, and damaged or worn threads on closure devices. After filling and before transporting, check for leaks. Container Restrictions Do not refill or transport a damaged or leaking container. *Any dealer wishing to repackage Command 1.5ME must comply with all Federal, State and local laws pertaining to bulk herbicide handling and possess a signed repackaging agreement from FMC Corporation.