crop-chem-docs/corpus/epa_ppls/33270-23.md

TREMOR NXT

• EPA Reg No: 33270-23
• Registrant: WINFIELD SOLUTIONS, LLC
• Signal word: Warning
• Active ingredients: Acetochlor (75.9%)
• Label accepted: 2018-02-08
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/033270-00023-20180208.pdf

---

February 8, 2018 Subject: Dear Ms. Finstad: Sincerely, Notification Label Revisions Requested v 20150904 OFFICE OF CHEMICAL SAFETY AND POLLUTION PREVENTION The Agency is in receipt of your Application for Pesticide Notification under Pesticide Registration Notice (PRN) 98-10 for the above referenced product. The Registration Division (RD) has conducted a review of this request for its applicability under PRN 98-10 and finds that the action requested falls within the scope of PRN 98-10. The label submitted with the application has been stamped “Notification” and will be placed in our records. Reuben Baris, Product Manager 25 Herbicide Branch Registration Division (7505P) Office of Pesticide Programs Notification per PRN 98-10 — Format Revisions Due to Transfer of Registration Product Name: TREMOR NXT EPA Registration Number: 33270-23 Application Date: August 17, 2017 Decision Number: 533165 Should you wish to add/retain a reference to the company’s website on your label, then please be aware that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims made on the website may not substantially differ from those claims approved through the registration process. Therefore, should the Agency find or if it is brought to our attention that a website contains false or misleading statements or claims substantially differing from the EPA approved registration, the website will be referred to the EPA’s Office of Enforcement and Compliance. If you have any questions, please contact Maggie Rudick by phone at 703-347-0257, or via email at rudick.maggie@epa.gov. Annelle Finstad Winfield Solutions, LLC. P.O. Box 64589 St. Paul, MN 55164 UNITED STATES ENVIRONMENTAL PROTECTION AGENCY WASHINGTON, DC 20460 w A

Page 1 Group 45 HERB ICIDE Contains 839 grams/liter or 7.0 pounds/gallon active ingredient Not for Sale, Sale Into, D istribution and/or Us e in Nassau and Suffolk Count ies of N ew York State. If on skin or clothing: If swa llow ed: If inhaled: Active Ingredients: acetochlor: 2 chloro 2 ’ methyl 6’ ethyl N -----ethoxymethylacetanilide.................. Other Ingredients:................................ Total....................................................... (Base label): [Reformatting label to remove redundant information and to convert it to a label booklet rather than a two piece - base plus cover/shipping - container label. Previous “Base label” information (page 1 - 4) is redundant to information that appears within the previous “cover/shipping container” portion of the labeling (page 5 - 24). Tremor NXT HERB ICIDE Avoid contact with skin, eyes, or clothing. Avoid breathing vapor or spray mist. Wash thoroughly with soap and water after handling.______________________________________________________ First Aid If in eyes: For use only on field corn, production seed corn, silage corn, sweet corn, popcorn, Miscanthus and other non-food perennial bioenergy crops Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice. Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Sensitized persons should avoid further contact and reuse of contaminated clothing. Call a poison control center or doctor for treatment advice. Call a poison control center or doctor immediately for treatment advice. Have person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison control center or doctor. Do not give anything by mouth to an unconscious persoftr___________________________________ Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably by mouth-to-mouth if possible. Call a poison control center or doctor for further treatment advice. Have the product container or label with you when calling a poison control center or doctor, or going for —Precautionary Statements —Hazards to Humans and Domestic Animals Caus es Substantial but Temporary Eye and Skin Irritation • Harmful If Sw allow ed or Inhaled • May Caus e Allergic Skin R eaction Keep Out of Reach of Children WARN ING ------AVISO Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en details. (If you do not understand the label, find someorie to explain it to you in detail.) NOTIFICATION 33270-23 ■|'hf applicant h-a;® certified thainc* changes, either than ttrnsc rcpcirtcd to the Anenc" b-ave been made tci the labeling. The .Agency ackncwicdgc! thss nc^icificaiicin by Lensr dated! 02/08/2018 . 75.9% .24.1% 100.0%

Page 2 When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [dO CFR 17Q.2'1Q(d)('1-6)], the handler PPE requirements may be reduced or modified as specified in the WPS. Aoetochlor has properties that may result in surface water contamination via dissolved runoff and runoff erosion. Practices should be followed to minimize the potential for dissolved runoff and/or runoff erosion. This chemical demonstrates the properties and characteristics associated with chemicals detected in groundwater. The use of this chemical in areas where soils are permeable, particularly where the groundwater is shallow, may result in groundwater contamination. D iscard clothing and other absorbent materials that have been drenched or heavily contaminated with this product's oonoentrate. Do not reuse them. Follow manufacturer's instructions for oleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry. Applicators and other handlers must w ear: •—Coveralls over short sleeved shirt and short pants •—Chemioal resistant gloves made of any waterproof material such as polyethylene or polyvinyl chloride •—Chemioal resistant footwear plus socks •—Protective eyewear •—Chemioal resistant headgear for overhead exposure •—Chemical-resistant apron when cleaning equipment, mixing, or loading —Environmental Hazards This product is toxic to fish. Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark. Do not contaminate water when disposing of equipment washwaters. —User Safety Recommendations U sers should: • W ash hands before eating, drinking, chewing gum, using tobacco or using the toilet. • Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. • Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing. treatment. For information on this product, contact the National P esticide Information Center, 1-800-858- 7378, Monday-Friday, 7:30 AM-3:30 PM PST. You may also contact the National Poison Control Center, 1-800-222 -1222, day or night, for emergency medical treatment________________________________ —P ersonal Protective Equipment (PPE) Some of the materials that are chemical-resistant to this product are listed below. If you want more options, follow the instructions for Category A on an EPA chemical resistance category selection chart. Nonrefillable containers 5 gallons or less:________________________________________________ —Storage and D isposal Do not contaminate water, food, or feed by storage or disposal. P esticide Storage: Store in original container only. Keep container closed when not in use. Do not store near food or feed. In case of spill or leak on floor or paved surfaces, soak up with vermiculite, earth, or synthetic absorbent.

Page 3 P esticide D isposal: P estioide wastes are toxic. Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of F ederal law. If these wastes cannot be disposed of by use according to label instructions, contact your State P estioide or Environmental Control Agency or the Hazardous Waste Representative at the nearest EPA Regional Office for guidance. Container H andling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if available, or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures allowed by state and local authorities. Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipnient or a mix tank and drain for 10 seconds after the flow begins to drip. F ill the container l/d full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about dO psi for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. Refillable containers larger than 6 gallons:________________________________________________ —Storage and D isposal Do not contaminate water, food, or feed by storage or disposal. P esticide Storage: Store in original container only. Keep container closed when not in use. Do not store near food or feed. In case of spill or leak on floor or paved surfaces, soak up with vermiculite, earth, or synthetic absorbent. P esticide D isposal: P esticide wastes are toxic. Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of F ederal law. If these wastes cannot be disposed of by use according to label instructions, contact your State P esticide or Environmental Control Agency or the H azardous W aste Representative at the nearest EPA Regional Office for guidance. Container H andling: Refillable container. Refill this container with pestioide only. Do not reuse this container for any other purpose. Cleaning the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal, empty the remaining contents from this container into application equipment or mix tank. F ill the container about 10% full with water. Agitate vigorously or recirculate water with the pump for two minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times. Nonrefillable containers larger than 5 gallons?_____________________________________________ —Storage and D isposal Do not contaminate water, food, or feed by storage or disposal. P esticide Storage: Store in original container only. Keep container closed when not in use. Do not store near food or feed. In case of spill or leak on floor or paved surfaces, soak up with vermiculite, earth, or synthetic absorbent. P esticide D isposal: P estioide wastes are toxic. Improper disposal of excess pestioide, spray mixture, or rinsate is a violation of F ederal law. If these wastes cannot be disposed of by use according to label instructions, contact your State P estioide or Environmental Control Agency or the H azardous W aste Representative at the nearest EPA Regional Office for guidance. Container H andling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if available, or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures allowed by state and local authorities. Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. F ill the container 1/d full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into application equipment or a mix tan or store rinsate for later use or disposal. Repeat this

Page 4 R efer to label book let for D irections for Us e. Agricultural Chemical: Do not ship or store with food, feeds, drugs or clothing. EPA Reg. No. 33270 -XX EPA E st. NET CONTENTS procedure two more times. Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about dO psi for at least 30 seconds. Drain for 10 seconds after the flow begins to drip^ Notice: R ead the entire label. Us e only according to label directions. B efore using this product, read W arranty Disclaim er, Inherent R isks of Us e and L im itation of R em edies at end of label book let. If terms are not acceptable, return at once unop ened. — Agricultural Us e R equirem ents Use this product only in accordance with its labeling and with the Worker Protection Standard, dO CFR part 170. Refer to the label booklet under "Agricultural Use Requirements" in the D irections for Use section for information about this standard. Produced for Un ited Supp liers, Inc 30d73 260**^ Street Eldora, lA 50627

Page 5 (cover/shipping container) Group 15 HERBICIDE Tremor NXT HERBICIDE Group HERB IC IDE Contains 839 grams/liter or 7.0 pounds/gallon active ingredient If on skin or clothing: If swallowed: If inhaled: Agricultural Us e R equirem ents Use this product only in accordance with its labeling and with the Worker Protection Standard, dO CFR part 170. Refer to the label booklet under "Agricultural Use Requirements" in the D irections for Use section for information about this standafdrfRedundant. Referral not needed.] Active Ingredients: acetochlor; 2-chloro-2'-methyl-6’-ethyl-N-ethoxymethylacetaniiide .... Other Ingredients: Total 75.9% 24.1% 100.0% Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk Counties of New York State. • Hold eye open and rinse slowly and gently with water for 15-20 minutes. •Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. •Call a poison control center or doctor for treatment advice.____________ •Take off contaminated clothing. • Rinse skin immediately with plenty of water for 15-20 minutes. •Sensitized persons should avoid further contact and reuse of contaminated clothing. •Call a poison control center or doctor for treatment advice.____________ •Call a poison control center or doctor immediately for treatment advice. • Have person sip a glass of water if able to swallow. •Do not induce vomiting unless told to do so by a poison control center or doctor. •Do not give anything by mouth to an unconscious person.____________ •Move person to fresh air. • If person is not breathing, call 911 or an ambulance, then give artificial 4£ [Moved to upper right of panel] For use only on field corn, production seed corn, silage corn, sweet corn, popcorn, Miscanthus and other non-food perennial bioenergy crops [First Aid statements moved here from below.] FIRST AID If in eyes: Keep Out of Reach of Children WARNING AVISO Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand the label, find someone to explain it to you in detail.)

Page 6 EPA Reg. No. 33270-23 EPA Est. NET CONTENTS 1/0817/7 (P age 1 through end): If on skin or clothing: If swa llow ed: Avoid contact with skin, eyes, or clothing. Avoid breathing vapor or spray mist. Wash thoroughly with soap and water after handling. WARNING. Causes Substantial but Temporary Eye and Skin Irritation • Harmful If Swallowed or Inhaled • May Cause Allergic Skin Reaction Refer to inside of label booklet for D irections for Use. SEE BOOKLET FOR ADDITIONAL PRECAUTIONARY STATEMENTS, COMPLETE DIRECTIONS FOR USE, WARRANTY DISCLAIMER AND LIMITATION OF LIABILITY. Notice: Read the entire label. Use only according to label directions. Before using this product, read Warranty D isclaimer, Inherent Risks of Use and Limitation of Remedies at end of label booklet.—If terms are not acceptable, return at once unopened. [The first two sentences are not required label elements and are redundant to the misuse statement. Winfield Solutions’ Warranty Statement information covers the third and fourth sentence.] [First Aid statements moved to first page/front panel of booklet.] First Aid If in eyes: Agricultural Chemical: Do not ship or store with food, feeds, drugs or clothing. [Storage and handling information is presented in other label sections.] respiration, preferably by mouth-to-mouth if possible. ___________•Call a poison control center or doctor for further treatment advice. Have the product container or label with you when calling a poison control center or doctor, or going for treatment. You may also contact 1-800-992 -5994 1-877-424-7452 for emergency medical treatment information Hold eye open and rinse slowly and gently with water for 15 20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice. Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Sensitized persons should avoid further contact and reuse of contaminated clothing. Call a poison control center or doctor for treatment advice. Call a poison control center or doctor immediately for treatment advice. Have person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison control center or doctor. Do not give anything by Produced for Manufactured By: Un ited Supp liers, Inc. Winfield Solutions, LLC 30473 260**^ Street Eldora, lA 50627 Precautionary Statements Hazards to Humans and Domestic Animals WARN ING P.O. Box 64589 St. Paul, MN 55164-0589

Page 7 If inhaled: Acetochlor has properties that may result in surface water contamination via dissolved runoff and runoff erosion. Practices should be followed to minimize the potential for dissolved runoff and/or runoff erosion. When handlers use closed systems or enclosed cabs in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS. Applicators and other handlers must wear: • Coveralls over short-sleeved shirt and short pants • Chemical-resistant gloves made of any waterproof material such as polyethylene or polyvinyl chloride • Chemical-resistant footwear plus socks • Protective eyewear • Chemical-resistant headgear for overhead exposure • Chemical-resistant apron when cleaning equipment, mixing, or loading Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product's concentrate. Do not reuse them. Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry. User Safety Recommendations Users should; • Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. • Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. • Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing. Environmental Hazards This product is toxic to fish. Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark. Do not contaminate water when disposing of equipment washwaters. This chemical demonstrates the properties and characteristics associated with chemicals detected in groundwater. The use of this chemical in areas where soils are permeable, particularly where the groundwater is shallow, may result in groundwater contamination. Personal Protective Equipment (PPE) Some of the materials that are chemical-resistant to this product are listed below. If you want more options, follow the instructions for Category A on an EPA chemical-resistance category selection chart. mouth to an unconscious persoRr_________________________________ Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably by mouth to mouth if possible. Call a poison control center or doctor for further treatment advice. H ave the product container or label with you when calling a poison control center or doctor, or going for treatment. For information on this product, oontaot the National P esticide Information Center, 1 800 858 7378, Monday Friday, 7:30 AM 3:30 PM PST. You may also contact the National Poison Control Center, 1 800 222 1222 day or night, for emergency medical treatment __________Directions for Use It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Read all Directions for Use carefully before applying.

Page 8 Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours. Exception: If the product is soil-injected or soil-incorporated, the Worker Protection Standard, under certain circumstances, allows workers to enter the treated area if there will be no contact with anything that has been treated. Nonrefillable containers 5 gallons or less: Container H andling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if available, or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures allowed by state and local authorities. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation. PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is: • Coveralls over short-sleeved shirt and short pants • Chemical-resistant gloves made of any waterproof material • Chemical-resistant footwear plus socks • Protective eyewear • Chemical-resistant headgear for overhead exposure Do not contaminate water, food, or feed by storage or disposal. P esticide Storage: Store in original container only. Keep container closed when not in use. Do not store near food or feed. In case of spill or leak on floor or paved surfaces, soak up with vermiculite, earth, or synthetic absorbent. P esticide D isposal: P esticide wastes are toxic. Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of F ederal law. If these wastes cannot be disposed of by use according to label instructions, contact your State P esticide or Environmental Control Agency or the H azardous W aste Representative at the nearest EPA Regional Office for guidance. Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. F ill the container l/d full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 psi for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. Agricultural Use Requirements Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE), and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. [Storage and Disposal statements moved to end of Directions for Use] STORAGE AND D ISPOSAL

Page 9 Product Information Use Restrictions R efillable containers larger than 6 gallons: Container H andling: Refillable container. Refill this container with pesticide only. Do not reuse this container for any other purpose. Cleaning the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal, empty the remaining contents from this container into application equipment or mix tank. F ill the container about 10% full with water. Agitate vigorously or recirculate water with the pump for two minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times. Tremor NXT herbicide is for preplant, preemergence, or early postemergence use in corn and for weed control in Miscanthus and other non-food perennial bioenergy crops. Use of this product in corn is limited to field com, production seed corn, silage corn, sweet corn, popcorn. Do not apply this product to any crop other than corn or for weed control in Miscanthus or other non-food perennial bioenergy crops. • On the following soil types, do not apply this product within 50 feet of any well where the depth to groundwater is 30 feet or less; sands with less than 3% organic matter; loamy sands with less than 2% organic matter; or sandy loams with less than 1 percent organic matter. See the figure for additional clarification. Nonrefillable containers larger than 5 gallons: Container H andling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if available, or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures allowed by state and local authorities. Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows; Empty the remaining contents into application equipment or a mix tank. F ill the container 1/d full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into application equipment or a mix tan or store rinsate for later use or disposal. Repeat this procedure two more times. Pressure rinse as follows; Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about dO psi for at least 30 seconds. Drain for 10 seconds after the flow begins to drip^ • This chemical demonstrates the properties and characteristics associated with chemicals detected in ground water. The use of this chemical in areas where soils are permeable, particularly where the ground water is shallow, may result in ground water contamination. • Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk Counties of New York State. Tremor NXT may be applied to the surface or incorporated into the top 1 to 2 inch layer of soil. It is specified for control alone, or in tank mix combinations as indicated, for the weeds listed in the Target Weeds section of these use directions. Tremor NXT controls weeds by interfering with normal germination and seedling development. Tremor NXT will not control emerged weeds present at application.

Page 10 50 foot setback ■* water table Hestriction does not apply for areas more than 50 feet Irom a well. • Do not apply this product using aerial application equipment, unless otherwise directed by approved supplemental labeling in possession of the user at the time of application. • Chemigation: Do not apply this product through any type of irrigation system, unless otherwise directed by approved supplemental labeling in the possession of the user at the time of application. • Do not use flood irrigation to apply or incorporate this product. • This product must not be mixed or loaded within 50 feet of any wells including abandoned wells and drainage wells, sink holes, perennial or intermittent streams and rivers, and natural or impounded lakes and reservoirs. This setback does not apply to properly capped or plugged abandoned wells and does not apply to impervious pad or properly diked mixing/loading areas. • Operations that involve mixing, loading, rinsing, or washing of this product into or from pesticide handling or application equipment or containers within 50 feet of any well are prohibited unless conducted on an impervious pad constructed to withstand the weight of the heaviest load that may be positioned on or moved across the pad. Such a pad shall be designed and maintained to contain any product spills or equipment leaks, container or equipment rinse or washwater, and rainwater that may fall on the pad. Surface water shall not be allowed to either flow over or from the pad, which means the pad must be self-contained. The pad shall be sloped to facilitate material removal. An unroofed pad shall be of sufficient capacity to contain at a minimum 110% of the capacity of the largest pesticide container or application equipment on the pad. A pad that is covered by a roof of sufficient size to completely exclude precipitation from contact with the pad shall have a minimum containment capacity of 100% of the capacity of the largest pesticide container or application equipment on the pad. Containment capacities as described above shall be maintained at all times. The above specified minimum containment capacities do not apply to vehicles when delivering pesticide shipments to the The acetochlor soil restriction Is as follows: On the fol lowing soil types, do notapols acetochlor within 50 feet ol any well where the depth to ground water is 30 feet or less:

• sands with less than 3 percent organic matter;
• loarry sands with lea than 2 percent organic matter; or
• sandy loams with less than 1 percent organic matter. Restriction does not apply if grcLird water is mo re than 30teet below land surface. rw U land serlacp

Page 11 Rotational Crop Restrictions: When tank mixing with other herbicides, follow the most restrictive crop rotation guidelines on the label of each product used. The following rotational crops may be planted as indicated: Spring/next season following application • Maximum Acetochlor Application Rates Per Calendar Year: Maximum annual acetochlor broadcast application rates for corn must not exceed 3.0 pounds active ingredient (3.4 pints Tremor NXT) per acre. Note: One pint per acre Tremor NXT delivers 0.875 pound active ingredient acetochlor per acre. Timing or Interval________ Immediately - 0 months after application______________ 4 months after application 9 months after application Rotational Crop_____________________________ Field corn, seed corn, silage corn, popcorn, sweet corn, milo (sorghum) (1)_______ Wheat______________________________________ Nongrass animal feeds such as alfalfa, clover, kudzu, lespedeza, lupin, sanfoin, trefoil, and Vetch spp._____ Soybeans, corn (all types), cotton, milo (sorghum), tobacco, sugar beets, sunflowers, potatoes, barley, buckwheat, millet (pearl and proso), oats, rye, teonsinte triticale, wild rice, dried shelled bean group Lupinus spp. (including grain lupin, sweet lupin, and white lupin); Phaseolus spp. (includes.field bean, kidney bean, lima bean (dry), navy bean, pinto bean, tepary bean, bean); Vigna spp.(includes adzuki bean, blackeyed pea, catjang, cowpea, Crowder pea, moth bean, mung bean, rice bean, southern pea, and urd bean); broad bean (dry) chickpea, guar, lablab bean, lentil, pea {Pisum spp., includes field pea); pigeon pea mixing/loading site. States may have in effect additional requirements regarding wellhead setbacks and operational containment. • Product must be used in a manner that will prevent back siphoning in wells, spills or improper disposal of excess pesticide, spray mixtures or rinsates. • Do not apply under conditions that favor runoff or wind erosion of soil containing this product to non­ target areas. To prevent off-site movement due to runoff or wind erosion:

• Avoid treating powdery dry or light sandy soils when conditions are favorable for wind erosion. Under these conditions, the soil surface must first be settled by rainfall or irrigation.
• Do not apply to impervious substrates such as paved or highly compacted surfaces or frozen or snow covered soils.
• Do not use tailwater from the first flood or furrow irrigation of treated fields to treat non-target crops unless at least 1/2 inch of rainfall has occurred between application and the first irrigation. • Do not apply when wind conditions favor drift to non-target sites. To minimize spray drift to non-target areas:
• Use low pressure application equipment capable of producing a large droplet spray.
• Do not use nozzles that produce a fine droplet spray.
• Minimize drift by using sufficient spray volume to ensure adequate coverage with large droplet size sprays.
• Keep ground-driven spray boom as low as possible above the target surface.
• Make application when the wind velocity favors on-target product deposition (approximately 3 to 10 mph). Do not apply when wind velocity exceeds 15 mph. Avoid application when gusts approach 15 mph.
• Low humidity and high temperatures increase the likelihood of spray drift to sensitive areas. Avoid spraying during conditions of low humidity and/or high temperatures. Do not apply during inversion conditions. • Do not apply Tremor NXT to sweet corn as an early postemergence application.

Page 12 Number within parentheses (-) in the table refers to specific rotational crop requirements below; 1. 2. 3. 4. Best Management Practices Proactively implementing diversified weed control strategies to minimize selection for weed populations resistant to one or more herbicides is recommended. A diversified weed management program may include the use of multiple herbicides with different modes of action and overlapping weed spectrum with or without tillage operations and/or other cultural practices. Research has demonstrated that using full labeled rates and following directions for use is important to delay the selection for resistance. Scouting after a herbicide application is important because it can facilitate the early identification of weed shifts and/or weed resistance and thus provide direction on future weed management practices. One of the best ways to contain resistant populations is to implement measures to avoid allowing weeds to reproduce by seed or to proliferate vegetatively. Cleaning equipment between sites and avoiding movement of plant material between sites will greatly aid in retarding the spread of resistant weed seed. (1) If crop treated with Tremor NXT is lost, field corn, seed corn, silage corn, popcorn, sweet corn, or milo (sorghum) may be replanted immediately. When replanting milo (sorghum) immediately, only use seed properly treated with seed protectant or safener; otherwise, rotation to milo (sorghum) may occur in Spring/next season. Do not exceed a total of 3.0 pounds per acre of active ingredient (3.4 pints Tremor NXT), if additional product is applied. General principles of herbicide resistance management Apply integrated weed management practices. Use multiple herbicide modes-of-action with overlapping weed spectrums in rotation, sequences, or mixtures. Use the full recommended herbicide rate and proper application timing for the hardest to control weed species present in the field. Scout fields after herbicide application to ensure control has been achieved. Avoid allowing weeds to reproduce by seed or to proliferate vegetatively. Monitor site and clean equipment between sites. Rotation to Non-food Winter Cover Crops Following harvest of food crops treated with Tremor NXT, only non-food or non-feed winter cover crops (with the exception of wheat) may be planted. Do not graze or harvest rotational cover crops for food or animal feed for 18 months following the last application of Tremor NXT. This prohibition does not apply to wheat, which may be planted 4 months following the last application of Tremor NXT, or to nongrass animal feeds, which may be planted 9 months after the last application of Tremor NXT. For annual cropping situations also consider the following: • Start with a clean field and control weeds early by using a burndown treatment or tillage in combination with a preemergence residual herbicide as appropriate. • Use cultural practices such as cultivation and crop rotation, where appropriate. • Use good agronomic principles that enhance crop competitiveness • Use new commercial seed that is as free of weed seed as possible. Weed Resistance Management Guidelines Acetochlor, the active ingredient in this product, is a Group 15 herbicide based on the mode of action classification system of the Weed Science Society of America. Any weed population can contain plants naturally resistant to Group 15 herbicides. Such resistant weed plants may not be effectively managed using Group 15 herbicides but may be effectively managed utilizing another herbicide from a different Group and/or by using cultural or mechanical practices. However, any herbicide mode of action classification by itself may not adequately address specific weeds that are resistant to specific herbicides. Consult your United Suppliers, Inc. Winfield Solutions, LLC representative, state cooperative extension service, professional consultants, or other qualified authorities to determine appropriate actions for treating specific resistant weeds.

Page 13 Application Directions - Corn Used Alone: If Tremor NXT is used alone, add the specified amount to the spray tank before the tank is half filled, then add the rest of the water or fluid fertilizer. Provide sufficient agitation to ensure thorough mixing and to maintain a uniform spray mixture during application. Tank Mixed: If a tank mixture is used, it is recommended that a small-scale test of compatibility be done before actual tank mixing. See Appendix I for details on the procedure for such a test. Report any incidence of repeated non-performance of this product on a particular weed to your Un ited Supp liers, Inc. Winfield Solutions, LLC representative, local retailer, or county extension agent. Dry Bulk Fertilizer: Tremor NXT may be impregnated on dry bulk fertilizer and applied as the fertilizer is spread. Use at least 200 lb of dry bulk fertilizer per acre. See Appendix II for more details including which fertilizers are compatible. Water Carrier Allow time for complete dispersion/mixing before adding another product to the spray mixture. Add products to the tank mixture in the following order: • To start, add one-half of the required amount of water to the spray tank. Begin agitation. • Products in water soluble packaging. Important: Allow time for complete dispersion. • Wettable powders or dry flowables (slurry if specified by tank mix product label) • Liquid flowables • Tremor NXT or other emulsifiable concentrates • Suspension concentrates • Urea ammonium nitrate (UAN) or ammonium sulphate (AMS), if required • Compatibility agent if needed • Soluble liquids such as glyphosate, paraquat, 2,4-D amine • Crop oil concentrate (COC) or nonionic surfactant (NIS), if required • Finish filling spray tank to required spray volume Apply in a minimum broadcast spray volume of 10 gallons per acre using boom equipment for ground applications. Use low pressure nozzles designed for application of herbicides. Use sufficient operating pressure to produce the desired spray pattern for the nozzle (15 to 40 psi) and follow manufacturer’s instructions for nozzle spacing and operating height to ensure uniform spray distribution at the soil surface. Use 50-mesh or coarser screens, if needed. Carriers and Spray Volume Liquids: Either water or liquid fertilizers such as solutions, slurries, or suspensions may be used as liquid carriers. If fluid fertilizers are used, a physical compatibility test with these must be done before combining in the spray tank. See Appendix I for details of the compatibility testing procedure. Even if Tremor NXT is physically compatible with a fluid fertilizer, constant agitation is necessary to maintain a uniform mixture during application. Adding to Spray Tank The spray tank must be clean, thoroughly rinsed, and decontaminated before adding either Tremor NXT alone or in tank mix combinations. If water is used as the carrier, use clean water. All return lines to the spray tank must discharge below the liquid level.

Page 14 Application Timing and Methods Note: For all tank mixtures, maintain agitation during mixing and throughout application to ensure spray mixture remains uniformly suspended. Postplant-Preemergence: Tremor NXT may be applied after planting but prior to com emergence, if rain or sprinkler irrigation does not occur within 7 days after application, weed control may be improved by Preplant Incorporation: Tremor NXT and certain tank mixes may be mechanically incorporated into the top 2 inches of the soil with field cultivators, discs, or spring tooth harrows any time up to 14 days prior to planting. Improper incorporation, excessive crop residues, or poor soil tilth may result in erratic, streaked, or otherwise unsatisfactory weed control. Do not mix Tremor NXT deeper than 2 inches into the soil and avoid moving or shaping soil after incorporation, as weed control may be reduced. Liquid Fertilizer Carrier Allow time for complete dispersion/mixing before adding another product to the spray mixture. Add products to the tank mixture in the following order: • To start, add one-half of the required amount of liquid fertilizer to the spray tank. Begin agitation. • Compatibility agent if needed • Products in water soluble packaging. Important: Products in water soluble packaging must be premixed with water (slurried) prior to addition to the spray tank. • Wettable powders or dry flowables (slurry if specified by tank mix product label) • Liquid flowables • Tremor NXT or other emulsifiable concentrates • Suspension concentrates • Ammonium sulphate (AMS), if tank mixing with glyphosate. • Soluble liquids such as glyphosate, paraquat, or 2,4-D amine • Crop oil concentrate (COC) or nonionic surfactant (NIS), if required • Finish filling spray tank to required spray volume. Preemergence Surface: Tremor NXT and certain tank mixes may be applied to the soil surface as a broadcast or banded application. Precipitation or sprinkler irrigation of at least 0.25 inch is required to bring Tremor NXT into contact with germinating seeds. If rain or sprinkler irrigation does not occur within 7 days after application, weed control may be improved by using a rotary hoe or similar equipment to incorporate the herbicide. Incorporation equipment should be run at a shallow depth to avoid disturbance of germinating corn seed. Erratic weed control resulting from exposure of untreated soil may occur if surface soil is moved or reshaped after incorporation. For the optimum period of effective weed control during the time most critical to corn production, preplant application of Tremor NXT herbicide should occur as close as possible to planting. Preemergence applications should occur as close as possible to planting, but prior to weed emergence; this product will not control emerged weeds present at application. Postemergence applications should occur prior to weed emergence or in tank mix combination with a product that controls emerged weeds. Note: Do not apply Tremor NXT to sweet corn as an early postemergence application. Early Preplant Surface: On medium and fine textured soils (see Table 1) Tremor NXT and certain tank mixtures may be applied up to 45 days before planting field com or silage com. Split applications can be made 30 to 45 days prior to planting with 60 percent of the specified broadcast rate applied initially and the remaining 40 percent applied at planting. Applications made less than 30 days prior to planting can be made either as a split or as a single application. If weeds are present at the time of application, apply this product in a tank mixture with an appropriate contact herbicide. Observe directions for use, precautions, and restrictions on the label of the contact herbicide. During the planting operation, be careful not to move untreated soil to the surface or move treated soil out of the row, as weed control may be reduced.

Page 15 Cultivation Ground may be tilled before or after application. Do not exceed 2-inch incorporation depth if tilled after application. Early Postemergence: Tremor NXT may be applied early postemergence to corn up to 11 inches tall. Application must be made prior to weed seedling emergence or in a tank mixture with a herbicide that controls the emerged weeds. Read and follow restrictions and directions on tank mix product labels. DO NOT apply postemergence to sweet corn. DO NOT make postemergence applications using sprayable liquid fertilizer as the carrier because severe crop injury may occur. Fall Application - For use only in Iowa, Minnesota, North Dakota, South Dakota, Wisconsin, north of Route 91 in Nebraska, and north of Route 136 in Illinois. Following soybean harvest, apply to soybean stubble after September 30, when the sustained soil temperature at 4-inch depth is less than 55°F, but before ground freezes. Use on medium- and fine-textured soils with greater than 2.5% organic matter. Only corn may be planted the following spring. Cultivation should be delayed as long as possible. If weeds emerge, a shallow cultivation or rotary hoeing will generally result in improved weed control. If Tremor NXT was incorporated, cultivate to a depth of less than half the depth of incorporation. If cultivation is necessary due to soil crusting or compaction, adjust equipment to run shallow and minimize soil movement. This will decrease the possibility of diluting or moving the herbicide from the weed control zone. If a spring application is made, the total rate of the fall plus spring application must not exceed the maximum labeled rate for corn grown on that soil. Sprinkler Irrigation: Do not apply Tremor NXT by sprinkler irrigation, unless otherwise directed by approved supplemental labeling in the possession of the user at the time of application. Use a sprinkler system to incorporate Tremor NXT after application. After Tremor NXT has been applied, a sprinkler irrigation system set to deliver 0.25 to 0.75 inch of water per acre may be used to incorporate the product. Using more than 0.75 inch of water could result in reduced performance. On sandy soil low in organic matter, use no more than 0.5 inch of water. Do not use flood irrigation to apply or incorporate Tremor NXT. Banding-Preemergence: Tremor NXT may be applied in a 10- to 14-inch band after corn planting but prior to emergence. If rain or sprinkler irrigation does not occur within 7 days after application, weed control may be improved by shallow incorporation using a rotary hoe or similar equipment. Do not disturb the germinating corn seed. Erratic weed control resulting from exposure of untreated soil may occur if surface soil is moved or reshaped during incorporation. Soil Texture and Organic Matter The use rate of Tremor NXT is determined by a combination of two factors, soil texture and organic matter, which must be determined prior to application. Different soil textures are grouped into three textural classes (coarse, medium, and fine) as outlined in Table 1. Soil texture and organic matter content of the soil may be determined from soil survey information and/or by laboratory analysis and must be known in order to select the proper rate from Table 2. using a rotary hoe or similar equipment to shallowly incorporate the herbicide. Incorporation equipment should be run at a shallow depth to prevent disturbance of the germinating corn. Erratic weed control resulting from exposure of untreated soil may occur if surface soil is moved or reshaped during incorporation.

Page 16 Coarse Broadcast Rate Per Acre (Pints)* Use the higher rate in the rate range in areas of heavy weed infestation. Sand Loamy Sand Sandy Loam The following use rates are for preplant incorporated, preemergence, and early postemergence applications (see Application Timing and Methods). Consult Table 3 if reduced or no-till applications are made or application is made more than 14 days prior to planting under conventional tillage. Tremor NXT may be used in reduced and no-till systems or as an early preplant application (more than 14 days prior to planting) in conventional tillage systems. Single applications may occur up to 30 days before planting but prior to weed emergence; application on coarse soils should not be made more than 14 days prior to planting. Optimal weed control will be obtained when applications are made as close as possible to planting but before weeds emerge. Split applications of Tremor NXT may be used; apply 60% of the recommended rate prior to weed emergence and up to 45 days before planting and the remaining 40% at or immediately following planting but before crop emergence. If weeds are present at application, it is recommended that a burndown herbicide such as paraquat (Gramoxone), glyphosate (Durango DMA), or 2,4-D be tank mixed with Tremor NXT. Broadcast Rate Per Acre (Pints) Soil Organic Matter Content Less than 3% Use Rates for Reduced Tillage Systems or Early Preplant Applications in Conventional Tillage Systems 1.25-1.75 1.75-2.25 1.75-2.25 1.50-2.00 2.25-2.75 2.75-3.00 Use Rates for Conventional Tillage Systems Table 2: Use Rates for Tremor NXT by Soil Texture and Organic Matter Content in Conventional Tillage Systems. Table 1: Soil Texture Groupings for Tremor NXT Use Rate Selection. _____ Medium Loam Silt Loam Silt Sandy Clay Loam Table 3' Use Rates for Tremor NXT by Soil Texture in Reduced and No-Till Systems or Conventional Tillage Systems when Applications are made more than 14 days Prior to Planting. _______Fine Silty Clay Loam Clay Loam Sandy Clay Silty Clay Clay Soil Texture Coarse Medium Fine *Use the higher rate in the rate range in areas of heavy weed infestation. On soils with 6 to 10 percent organic matter, use 2.5 to 3.4 pints per acre. On soils with more than 10 percent organic matter, use 3.4 pints per acre. Soil Texture Coarse Medium Fine 3% or more 1.75 1.75-2.25 2.25-2.75

Page 17 Row width in inches Row width in inches Weeds Controlled Table 4: Weeds Controlled or Partially Controlled by Tremor NXT at Specified Use Rates. johnsongrass, seedling PC C = Control PC = Partial Control C C C PC PC c PC c c c c c c c c c c c C = Control PC = Partial Control PC C C PC c PC PC c c c c c c c PC PC PC PC c c Tremor NXT, applied as directed in this label, will provide control or partial control of the weeds listed in Table 4. Partially controlled weeds will be severely stunted, or experience reduced height, vigor, or population compared to untreated areas. Depending on the infestation level or density, a follow-up treatment with another registered herbicide may be needed to provide complete control. Band Applications This product may be applied as a band treatment. Use the following formulas below to determine the appropriate rate and volume per treated acre. Broadcast rate = Band rate per per acre treated acre Broadcast volume = Band volume per acre per treated acre Additional weeds may be controlled with tank mixes. See the Tank Mix Combinations section for specified tank mix combinations and additional weeds controlled. cupgrass, prairie_________ cupgrass, southwestern cupgrass, woolly (1)______ foxtail, bristly____________ foxtail, giant_____________ foxtail, green____________ foxtail, robust (purple, white) foxtail, yellow goosegrass Grasses and Sedges barnyardgrass______ crabgrass spp.______ crowfootgrass millet, foxtail_______ millet, wild proso (2) nutsedge , yellow (3) oats, wild_________ panicum, browntop panicum, fall Broadleaves___________ beggarweed, Florida_____ carpetweed_____________ galinsoga______________ groundcherry, cutleaf_____ hen bit_________________ jimsonweed____________ kochia_________________ lambsquarters, common (5) nightshade, black________ nightshade, hairy________ pigweed spp.___________ purslane, common_______ pusley, Florida__________ ragweed, common (5) sida, prickly____________ smartweed spp._________ starbur, bristly__________ velvetleaf______________ waterhemp, common_____ waterhemp, tall Band width in inches ------------------------- X Band width in inches ------------------------- X

Page 18 1. 4. 5. Tank Mix Combinations 2. 3. For all applications, do not exceed the maximum rate of acetochlor as specified in the Maximum Acetochlor Application Rate Per Calendar Year section of this label. When tank mixing Tremor NXT with atrazine, do not exceed the maximum allowable rate of atrazine in your county or state. In some atrazine management areas, atrazine is more restricted. Consult your county extension office or state university for further information. PC C PC PC c c PC c Tremor NXT may be tank mixed with any other herbicide labeled for use on corn provided the compatibility of the tank mix is verified by a jar test and tank mixing with Tremor NXT is not prohibited by the label of the tank mix product. The compatibility of a tank mixture can be determined by mixing the ingredients of the herbicide mixture in their relative proportions in a glass jar as described for fluid fertilizer mixtures in Appendix I by substituting water for fluid fertilizer. Refer to the label of the tank mix product for applicable use directions, precautions and limitations, including additional weeds controlled. Do not exceed application rates on the respective product labels. Do not tank mix with another pesticide product that contains the same active ingredient as this product unless the label of either tank mix partner specifies the maximum dosages that may be used. Additional weeds may be controlled with tank mixes of Tremor NXT and other products labeled for use on field corn, production seed corn, silage corn, sweet corn and popcorn. Tank mix combinations may be used in conventional, reduced, or no-till systems and may be applied by the same methods and at the same application timing as Tremor NXT herbicide unless otherwise specified in the tank mix product label. Use 3.0 to 3.4 pints per acre applied alone or in tank mixtures for best results. Control may be erratic, especially under dry conditions. Control escaped weeds with cultivation or application of a registered postemergence herbicide. Use 3.0 to 3.4 pints per acre. Use 2.5 to 3.4 pints per acre applied alone or in tank mixtures and apply preplant incorporated only for control on medium- and fine-textured soils. Best control is achieved when Tremor NXT is applied within 5 days of planting and rainfall occurs shortly after application or mechanical incorporation is used to activate the herbicide. If it does not rain within 7 days of application, shallow cultivation will enhance activity. Excessive rainfall after application may reduce control. Under adverse weather conditions and/or heavy infestations, cultivation or application of a registered postemergence herbicide may be needed. Use the higher rate in the application rate range. Use of Spray Adjuvants Tremor NXT is a preemergence herbicide for which spray adjuvants have little or no influence on performance. However, several herbicides used in tank mixtures with Tremor NXT require use of adjuvants to aid in the burndown of emerged weeds. Use only those adjuvants recommended on the label of the tank mix product and approved for use in growing crops. Surfactants and/or low rate liquid panicum, Texas (4)_____ rice, red______________ sandbur, field_________ Shattercane (2)________ siqnalqrass, broadleaf (4) sprangletop, red_______ wheat, volunteer_______ witchgrass

Page 19 Preemergence Tank Mix Combinations Hornet WDG Balance Pro Tremor NXT may be tank-mixed with Aim EC, atrazine, Balance Pro, Balance Flexx, Banvel, Callisto, Callistro Xtra, Clarity, Distinct, Durango DMA, Hornet WDG, Linex 4L, Lorox DF, Marksman, Princep, Python WDG, Resource, SureStart (do not exceed a total of 3.0 lbs ai acetochlor per acre per year), or 2,4_D for preemergence use in corn. Ensure that specific product being used in the tank mixture is registered for preemergence application to corn. Read and follow label directions of all products in the tank mixture; the most restrictive label directions apply. ■t Formulations that are not listed may be used. Perform a compatibility test and check the label of the tank mix product label for application rates, applicable use directions, precautions and limitations. fertilizers (28%, 30% or 32% UAN) or ammonium sulfate (AMS) adjuvants may be used with tank mixes applied preplant or preemergence to the crop. Comments • May be applied preplant surface, preplant incorporated, preemergence, if emerged weeds are greater than 1,5 inches tall at the time of application, add an appropriate postemergence herbicide • Provides control or partial control of cocklebur, giant ragweed, annual ground chemy, jimsonweed, kochia, morningglory spp., mustard spp., sicklepod, and velvetleaf • Use in areas with heavy broadleaf weed pressure________________ • Tank mix with 4-5 oz/acre of Hornet® WDG herbicide to provide consistent control of velvetleaf, lambsquarters, pigweed species, waterhemp and triazine resistant varieties of these species. Also provides improved cx>ntrol of cocklebur, common ragweed, giant ragweed, common sunflower and jimsonweed.____________________ • Provides improved crabgrass or fall panicum control._______________ • Tank mix with 0,8 - 1.33 oz/acre of Python® WDG herbicide to provide consistent control of velvetleaf, lambsquarters, pigweed species, waterhemp and triazine resistant varieties of these species. Conventional Tillage (Tremor NXT Plus): Tank Mix Herbicide^ Atrazine 4L Reduced or No-Tillage Corn (Tremor NXT Pius): Tank Mix Herbicide * Atrazine 4L Banvel/Clarity Marksman Durango DMA,, Roundup WeatherMax, Touchdown Princep 4L Python WDG Comments • Provides control or partial control of cocklebur, giant ragweed, annual ground chemy, jimsonweed, kochia, morningglory spp., mustard spp., sicklepod, and velvetleaf • If emerged weeds are greater than 1,5 inches tall at the time of application, add an appropriate postemergence hert3icide • Use in areas with heavy broadleaf weed pressure_______________ • Not labeled in all states; refer to Balance Pro label for precautionary statements, directions for use, geographic and other use restrictions • For use in field corn only • Refer to use rate section for minimum use rates of Tremor NXT_____ • Apply preplant or preemergence in reduced/ no-till systems for burndown of existing weeds_________________________________ • Apply preplant for burndown of existing weeds • Weeds less than 6 inches tall are easiest to control with burndown herbicides applied in combination with Tremor NXT. • Always add ammonium sulphate (AMS) to tank mixes prior to addition of glyphosate (8.5 to 17 lb per 100 gal of spray).

Page 20 Postemergence Tank Mixes (Tremor NXT Plus): Distinct 4-6 oz/acre When tank mixing, read and follow label use directions and precautions of the tank mix product and follow additional use directions in the following table; Buctril Buctril/atrazine Shotgun herbicide Atrazine 1,5 pt/acre 2 pt/acre 2-3 pt/acre 0.5 - 2 lb ai/acre Note: DO NOT use liquid fertilizer as the carrier when Tremor NXT is applied postemergence to corn as severe injury may result. The addition of liquid fertilizers used as adjuvants with Tremor NXT tank mixes applied postemergence to corn under environmental stress conditions may result in significant crop injury and should not be used if the risk of crop injury is unacceptable. Rate 2-5 oz/acre 0.5 oz/acre 0.5 -1 pt/acre 0.5 -1 pt/acre 2 - 3.5 pt/acre f Formulations that are not listed may be used. Perform a compatibility test and check the product label for application rates, applicable use directions, precautions and limitations. • Control annuals, suppress perennials_________________________ • Preemergence to early postemergence to cx>rn up to 3 inches tall, but before weeds are more than 1 inch tall.________________________ • Provides improved control of crabgrass and fall panicum__________ • Burndown existing weeds Postemergence Tank Mix Combinations Tremor NXT can be applied to corn up to 11 inches tall. Tremor NXT may be applied before, with, or following the use of one or more of the follovring herbicides for postemergence use in corn; Accent, Accent Gold, Aim EC, atrazine, Balance Flexx, Banvel, Basis, Basis Gold, Beacon, Bladex, Buctril, Buctril/atrazine, Callisto, Callistra Xtra, Capreno, Clarity, Distinct, Durango DMA, Halex GT, Hornet WDG, Impact, Laudis, Liberty, Lightning, Linex 4L, Lorox DF, Marksman, Peak, Permit, Princep, Provd, Pendimax, Pursuit, Resource, Shotgun, Spirit, Status,Steadfast, or 2,4-D. Refer to the label of the tank mix product for applicable directions for use, precautions and restrictions, and a list of weeds controlled. Tremor NXT may be tank mixed with any product approved for use on corn unless it is prohibited by the tank mix product label. Ensure that specific product being used in the tank mixture is registered for postemergence application to corn. Read and follow label directions of all products in the tank mixture; the most restrictive label directions apply. • May be applied preplant surface, preplant incorporated, preemergence or early postemergence to corn up to 8 inches tall. If emerged weeds are greater than 1.5 inches tall at the time of application, add an appropriate postemergence hert>icide. Note: The maximum atrazine application rate per year for corn is 2 lb active if applied only postemergence or 2.5 lb active if pre- and postemergence applications are made.______ • Always add a NIS at 0.25% v/v and 1.25% Comments • Always add NIS at 0.25% v/v or COC at 1 % v/v. • Always add a NIS at 0.25% v/v._____________ • Early postemergence up to 8 inches tall corn on all soils, if grasses are more than 2-leaf stage, combine with another herbicide to control these weeds.________________________________ • Refer to tank mix product labels for applicable use directions, precautions and restrictions. Tank Mix Hert^icide Hornet WDG Aim EC Banvel Clarity Marksman Gramoxone Max Pendimax® Prowl_________ Princep 4L 2,4-D...........

Page 21 Exceed 1 oz/acre Liberty 16-28 oz/acre Lightning 1.28 oz/acre Pendimax / Prowl 1.8- 3.6 pt/acre Resource 4-6 oz/acre Spirit 1 oz/acre 2,4-D Ester See label Basis Gold 14 oz/acre Pursuit 2.5L Pursuit 70DG 4 fl oz/acre 1.4 fl oz/acre Accent 75WDG Beacon 75WDG Basis Steadfast 1/4 - 2/3 oz/acre 0.76 oz/acre 1/4 - 2/3 oz/acre 0.75 oz/acre <3%OM 1.25 1.25 1.25 <3%OM 1.25 1.25 1.25 UAN. • Can be applied up to corn up to 10 inches tall. • Always add crop oil concentrate at 1% v/v. • See label for Exceed for geographic restrictions. • For use on Liberty tolerant corn only. Apply to grass and broadleaf weeds up to 6 inches tall. Do not add additional surfactant.________ • For use on Clearfield corn only. Use an NIS at 25%v/v and a liquid nitrogen fertilizer at 1 to 2 qt per acre or ammonium sulfate at 2.5 lb per acre.__________________________________ • Apply preemergence or apply early postemergence to corn up to 3 inches tall, but before weeds are more than 1 inch tall._______ • Use only on Clearfield varieties. • Apply preplant incorporated, preplant surface, preemergence or early postemergence to weeds up to 3 inches tall.__________________ • Apply to weeds less than 5 inches tall. Add a crop oil concentrate at 1 to 2 pt/acre and either 28% nitrogen at 2% v/v or ammonium sulfate at 2.5 Ib/acre. May cause some burn or spotting to corn leaves.__________________________ • Always add crop oil concentrate at 1% v/v. • See label for Spirit for geographic restrictions. • Apply preplant surface or preemergence to control emerged broadleaf weeds in corn._____ • Minimum Tremor NXT use rates (pt/acre); 3% or more OM 1.25 1.25-1.75 1.25-1.75 Soil Coarse Medium Fine • Always add NIS at 0.25% (v/v) and^ in addition if applied under dry conditions, add 4% (v/v) clear liquid fertilizer. • Banvel, Clarity, Marksman, Buctril, Buctril/atrazine may be added to this mixture to provide burndown and residual control of broadleaf weeds.________________________ • Minimum Tremor NXT use rates (pt/acre); 3% or moreOM 1.25 1.25-1.75 1.25-1.75 Soil Coarse Medium Fine • Always add COC at 1.0% v/v or, under dry arid conditions, add COC at 2.0% v/v plus 2 qt/acre of 28% liquid nitrogen or 2 Ib/acre of ammonium sulfate. • Banvel, Clarity, Marksman, Buctril, or Tough may be added to this mixture to provide burndown and residual control of broadleaf weeds.

Page 22 Miscanthus and Other Non-food Perennial Bioenergy Crops Appendix I Procedure for Testing the Compatibility of Tremor NXT and Tank Mixes with Fluid Fertilizers 3, 4, 5, For weed control in Miscanthus and other non-food perennial bioenergy crops, apply Tremor NXT herbicide at 1.3-1,7 pints per acre after the crop has been transplanted or after fully emerged to a height of at least 2-3 inches. Up to two applications of Tremor NXT herbicide may be made each year. The total amount of this product applied each year must not exceed 3.4 pints per acre. Evaluation: If either mixture remains uniform for 30 minutes, the combination may be used. Should either mixture separate after 30 minutes, but readily remix uniformly with 10 jar inversions, the mixture can be used if adequate agitation is maintained in the tank. If the mixture with adjuvant is satisfactory but the one without adjuvant is not, be sure to use the adjuvant in the spray tank. Add the adjuvant first at a rate of 3 pints per 100 gallons of fluid fertilizer. Foaming may be minimized by using moderate agitation. If non- dispersible oil, sludge, or clumps of solids form in the mixtures, the combination should not be used. Since fluid fertilizers vary, the following procedure is suggested for determining whether Tremor NXT herbicide may be combined with a specific fluid fertilizer for spray tank application. Procedure: 1. 2. Materials Needed: • Tremor NXT and any tank mix products • Fluid fertilizer to be used • Adjuvant for fertilizer tank mix; Use any adjuvant cleared for use on growing crops under 40 CFR 180.1001 to improve the compatibility of Tremor NXT with fluid fertilizers. The adjuvant that provides the best emulsification depends upon the specific fertilizer under consideration. • Two 1 quart, wide mouth glass jars with lid or stopper • Measuring spoons (a 25 ml pipette or graduated cylinder provides more accurate measurement) • Measuring cup, 8 oz (257 ml) Pour a pint (about 473 ml) of the fluid fertilizer into each of the quart jars. Add Tremor NXT and any tank mix combination to the jars. The order of addition is wettable powders first with mixing, followed by flowables with mixing and the ECs last. The rate of wettable powders and dry flowables is 1 1/2 teaspoon per pound of product per acre to be applied, ECs should be added at the rate of 1/2 teaspoon for each pint per acre to be applied. Premixing the wettable powders in 1 oz of water before adding to the pint of fluid fertilizer will improve the compatibility of the final mixture. Add 1/2 teaspoon (2 ml) adjuvant to one of the jars, label it as "with," and mix. The rate of 1/2 teaspoon per pint is equal to 3 pints of adjuvant per 100 gallons of fluid fertilizer. Close both jars with lids or stoppers and mix the contents by turning the jars upside down 10 times. Inspect the surface and body of the mixtures- (a) Immediately after completing the jar inversions (b) After allowing the jars to stand undisturbed for 30 minutes (c) And then again after turning the jars upside down 10 times after the 30 minute inspection Restrictions: • Do not allow the Miscanthus or other non-food perennial bioenergy crop treated with Tremor NXT herbicide to be grazed or used as animal feed.

Page 23 Appendix II Dry Bulk Fertilizer Impregnation Approved Dry Fertilizer Ingredients for Use with Tremor NXT (1) To determine the amount of Tremor NXT needed for other rates of fertilizer, use this formula; Pints of Tremor NXT per ton of fertilizer All individual state regulations relating to dry bulk fertilizer blending, registration, labeling, and application are the responsibility of the individual and/or company selling Tremor NXT, Tremor fertilizer mixtures. The following table provides a reference to determine the amount of Tremor NXT to be mixed per ton of dry bulk fertilizer for a range of herbicide rates. For impregnating pesticides on dry fertilizers, use suitable mixers equipped with suitable spraying equipment. The spray nozzles should be positioned inside the mixer to provide uniform spray coverage of the tumbling fertilizer. Tremor NXT should be sprayed uniformly onto the fertilizer using a fine spray pattern. Tank mix components may be applied as separate ingredients with powders and dry flowables added first or they may be mixed in a slurry in the proper ratio and added jointly. Tremor NXT may also be impregnated on dry bulk fertilizer in the field while the fertilizer is being spread using a pneumatic applicator equipped to impregnate herbicides. Tremor NXT rate (pints/acre) X 2000 Pounds of fertilizer/acre N 16 21 18 11 0 0 45 P 20 0 46 56 0 0 0 K 0 0 0 0 60 52 0 20.0 13.4 10.0 8,0 6.6 5,8 27.5 18.4 13.8 11.0 9.1 8,0 (1) Do not impregnate on fertilizers containing ammonium nitrate, potassium nitrate, or sodium nitrate. (2) Some ureas may be phytotoxic when high rates are applied to corn. Use only urea rates knowi to be safe for com application. Tremor NXT Rate (pints/acre) To I 2.25 I £75 Pints Tremor NXT per Ton of Fertilizer .1.......22,5.......1... 15,0 1T3 9,0 7,4 6,5 When applying Tremor NXT alone or in tank mixes with dry bulk fertilizers, follow all directions for use and precautions on the respective tank mix product labels regarding use rates, soil texture, application methods, and rotational restrictions. Use a minimum of 200 lb of dry bulk fertilizer per acre. Fertilizer Ammonium Phosphate-Sulfate Ammonium Sulfate_________ Diammonium Phosphate Monoammonium Phosphate Potassium Chloride_________ Potassium Sulfate Urea (2) Fertilizer Rate (Ibs/acre) 200 300 400 500 600 700 Acres Covered (per ton) 10.0 6.7 5.0 4.0 3.3 2,9

Page 24 Refillable containers larger than 5 gallons: Container Handling: Refillable container. Refill this container with pesticide only. Do not reuse this container for any other purpose. Cleaning the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility of the refilfer. To clean the container before final disposal, empty the remaining contents from this container into application equipment or mix tank. Fill the container about 10% full with water. Agitate vigorously or recirculate water with the pump for two minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times. Nonrefillable containers 5 gallons or less: Container Handling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if available, or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures allowed by state and local authorities. Nonrefillable containers larger than 5 gallons: Container Handling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if available, or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures allowed by state and local authorities. Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows; Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Pressure rinse as follows; Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 psi for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. Precaution: To avoid potential for explosion, do not impregnate Tremor NXT on ammonium sorbate nitrate, potassium nitrate, or sodium nitrate fertilizer or fertilizer blends. Do not impregnate on a single (0- 20-0) or triple (0-46-0) super phosphate. Do not attempt to impregnate Tremor NXT on agricultural limestone as the herbicide will not be adequately absorbed. Do not contaminate water, food, or feed by storage or disposal. Pesticide Storage: Store in original container only. Keep container closed when not in use. Do not store near food or feed. In case of spill or leak on floor or paved surfaces, soak up with vermiculite, earth, or synthetic absorbent. Pesticide Disposal: Pesticide wastes are toxic. Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of Federal law. If these wastes cannot be disposed of by use according to label instructions, contact your State Pesticide or Environmental Control Agency or the Hazardous Waste Representative at the nearest EPA Regional Office for guidance. If the herbicide/fertilizer mixture is too wet, use of a drying agent is required to provide a dry, free-flowing mixture. For mixtures to be used in spinning-disc applicators, Micro-Cel E calcium silicate powder (Manville, Filtration & Minerals) is recommended for use as a drying agent. Mixtures to be used in pneumatic applicators should use Micro-Cel E or Agsorb 16/30 RVM-MS granular clay (Oil-Dri Corporation). The drying agents should be added separately and uniformly to the prepared pesticide/fertilizer mixture, in a quantity that is sufficient to provide a suitable free-flowing mixture. Generally, less than 2% Micro-Cel E or 5% Agsorb 16/30 RVM-MS by weight is required. [Storage and Disposal statements moved here from above.] STORAGE AND DISPOSAL

Page 25 Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows; Empty the remaining contents into application equipment or a mix tank. Fill the container 1/4 full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into application equipment or a mix tan or store rinsate for later use or disposal. Repeat this procedure two more times. Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 psi for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. To the extent permitted by law, United Suppliers, Inc. shall not be liable for losses or damages resulting from handling or use of this product unless United Suppliers, Inc. is promptly notified of such loss or damage in writing. To the extent permitted by law, in no case shall United Suppliers, Inc. be liable for consequential or incidental damages or losses. The terms of the W arranty D isclaimer, Inherent Risks of Use and this Limitation of Remedies cannot be varied by any written or verbal statements or agreements.—No employee or sales agent of United Suppliers, Inc. or the seller is authorized to vary or exceed the terms of the Warranty D isclaimer or this Limitation of Remedies in any manner. FOR CHEMICAL EMERGENCY: Spill, leak, fire, exposure, or accident, call CHEMTREC 1-800-424-9300 Limitation of Remedies To the extent permitted by law, the exclusive remedy for losses or damages resulting from this product (including claims based on contract, negligence, strict liability, or other legal theories), shall be limited to, at United Suppliers, Inc. election, one of the following: 4^—Refund of purchase price paid by buyer or user for product bought, or 2:—Replacement of amount of product used. Warranty D isclaimer United Suppliers, Inc. warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes stated on the label when used in strict aooordanoe with the directions, subject to the inherent risks set forth below.—To the extent permitted by law. United Suppliers, Inc. MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF MERCHANTAB ILITY OR FITNESS FOR A PART ICULAR PURPOSE OR ANY OTHER EXPRESS OR IMPLIED WARRANTY. Terms and Conditions of Use If terms of the following Warranty Disclaimer, Inherent Risks of U se and Limitation of Remedies are not acceptable, return unopened package at once to the seller for a full refund of purchase price paid. To the extent permitted by law, otherwise, use by the buyer or any other user constitutes acceptance of the terms under Warranty D isclaimer, Inherent Risks of U se and Limitation of Remedies. Inherent Risks of Use It is impossible to eliminate all risks associated with use of this product. Crop injury, lack of performance, or other unintended consequences may result because of such factors as use of the product contrary to label instructions (including conditions noted on the label, such as unfavorable temperatures, soil conditions, etc.), abnormal conditions (such as excessive rainfall, drought, tornadoes, hurricanes), presence of other materials, the manner of application, or other factors, all of which are beyond the control of United Suppliers, Ino. or the seller. To the extent permitted by law, all such risks shall be assumed by buyer.

Page 26 Tremor® is a registered trademark of Winfield Solutions, LLC If you do not agree with or do not accept any of directions for use, the warranty disclaimers, or limitations on liability, do not use the product, and return it unopened to the Seller, and the purchase price will be refunded. WARRANTY DISCLAIMER The directions for use of this product must be followed carefully. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, (1) THE GOODS DELIVERED TO YOU ARE FURNISHED “AS IS” BY MANUFACTURER OR SELLER AND (2) MANUFACTURER AND SELLER MAKE NO WARRANTIES, GUARANTEES, OR REPRESENTATIONS OF ANY KIND TO BUYER OR USER, EITHER EXPRESS OR IMPLIED, OR BY USAGE OF TRADE, STATUTORY OR OTHERWISE, WITH REGARD TO THE PRODUCT SOLD, INCLUDING, BUT NOT LIMITED TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, USE, OR ELIGIBILITY OF THE PRODUCT FOR ANY PARTICULAR TRADE USAGE. UNINTENDED CONSEQUENCES, INCLUDING BUT NOT LIMITED TO INEFFECTIVENESS, MAY RESULT BECAUSE OF SUCH FACTORS AS THE PRESENCE OR ABSENCE OF OTHER MATERIALS USED IN COMBINATION WITH THE GOODS, OR THE MANNER OF USE OR APPLICATION, INCLUDING WEATHER, ALL OF WHICH ARE BEYOND THE CONTROL OF MANUFACTURER OR SELLER AND ASSUMED BY BUYER OR USER. THIS WRITING CONTAINS ALL OF THE REPRESENTATIONS AND AGREEMENTS BETWEEN BUYER, MANUFACTURER AND SELLER, AND NO PERSON OR AGENT OF MANUFACTURER OR SELLER HAS ANY AUTHORITY TO MAKE ANY REPRESENTATION OR WARRANTY OR AGREEMENT RELATING IN ANY WAY TO THESE GOODS. LIMITATION OF LIABILITY TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, IN NO EVENT SHALL MANUFACTURER OR SELLER BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, OR FOR DAMAGES IN THE NATURE OF PENALTIES RELATING TO THE GOODS SOLD, INCLUDING USE, APPLICATION, HANDLING, AND DISPOSAL. MANUFACTURER OR SELLER SHALL NOT BE LIABLE TO BUYER OR USER BY WAY OF INDEMNIFICATION TO BUYER OR TO CUSTOMERS OF BUYER, IF ANY, OR FOR ANY DAMAGES OR SUMS OF MONEY, CLAIMS OR DEMANDS WHATSOEVER, RESULTING FROM OR BY REASON OF, OR RISING OUT OF THE MISUSE, OR FAILURE TO FOLLOW LABEL WARNINGS OR INSTRUCTIONS FOR USE, OF THE GOODS SOLD BY MANUFACTURER OR SELLER TO BUYER. ALL SUCH RISKS SHALL BE ASSUMED BY THE BUYER, USER, OR ITS CUSTOMERS. BUYER ’S OR USER ’S EXCLUSIVE REMEDY, AND MANUFACTURER ’S OR SELLER ’S TOTAL LIABILITY SHALL BE FOR DAMAGES NOT EXCEEDING THE COST OF THE PRODUCT.