crop-chem-docs/corpus/epa_ppls/352-642.md

DUPONT GF 1:2 HERBICIDE

• EPA Reg No: 352-642
• Registrant: CORTEVA AGRISCIENCE, LLC
• Signal word: Caution
• Active ingredients: Flucarbazone-sodium (46.7%); Chlorsulfuron (25%)
• Label accepted: 2005-09-26
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000352-00642-20050926.pdf

---

r .

I .

H·

cqUPON~

DuPont™ Finesse®

Grass & Broadleaf (mp)

herbicide

DRAFT LABEL. .IJ~

DUPONT'" FINESSE® Grass & Broadleaf (mp) HIGHliGHTS For selective postemergence grass and broadleaf weed control in both winter and spring wheat (including durum). • Apply postemergence to winter wheat anytime after the crop has 2 leaves, but prior to jointing. Apply postemergence to spiing wheat (including durum) anytime after emergence, Qut before the majority of plants have 4 total leaves on main stem plus two tillers. May be applied by ground or air. Use in tank mixtures with other registered herbicides for broader spectrum weed control (see TANK MIXTURES) . • FlNESSE® Grass & Broadleaf(mp) is recommended for land primarily dedicated to long-tenn production of wheat (see CROP ROTATION section for recropping infonnation). Consult label text for complete instructions. Always read and follow label DIRECTIONS FOR USE. :. TABLE 011' CONTENTS PRECAUTIONARY STATEMENTS ............................... I DIRECTIONS FOR USE .................................................. 2 GENERAL INFORMATION ............................................ 2 Environmental Conditions and Biological Activity ........... 2 Application Timing .................................. ,,, ....................... 3 Weeds Controlled .................................................. " ........... 3 Weeds Partially Controlled ............................................... .3 Specific Weed Problems ................................................... .4 Tank Mixture.i .................................................................... 5 CROP ROT ATlON ....................................................... , .... 6 Minimum Re(:ropping Intervals ......................................... 6 Soil pH Limitations ............................................................ 7 Checking Soil pH ............................................................... 7 BIOASSAY .................................. " .................................... 8 GRAZING .......................................................................... 8 MIXING INSTRUCTIONS ............................................... 8 SPRAY EQ UI PMENT ....................................................... 8 SPRAYER CLEANUP ...................................................... 8 SPRA Y DRIfT MANAGEMENT .................................... 9 RESISTANCE ................................................................. 10 INTEGRA TED PEST MANAGEMENT ........................ 10 PRECA UTI ON S ............. "."."".". " ......... ' ....................... 1 0 STORAGE AND DISPOSAL ......................................... 1 I NOTICE OF WARRANTy ............................................. 12

ACCEPTED SEP 26 ZW5 <®PON~ DuPonfM Finesse®' Grass & Broadleaf (mp) herbicide A Unit Pack Product For Use on Wheat Active Ingredients: Chlorsulfuron: 2-Chloro-N-[( 4-methoxy-6-methyl- 1,3,5-triazin-2 -yl )aminocarbonyl] benzenesulfonamide Flucarbazone-sodium*: 4,5-Dihydro-3-methoxy-4-methyl-5-oxo­ N -[[2 -( tri t1 uoromethox y )pheny I ]su I fo nyl ]­ I H-I,2,4-triazole-I-carboxamide, sodium salt Inert Ingredients: TOTAL *44% Flucarbazone acid equivalent EPA Reg. No. 352-642 EPA Est. No. ____ _ Net Contents: 18 ounces By Weight 25.0% 46.7 28.3% 100.0% KEEP OUT OF REACH OF CHILDREN CAUTION FIRST AID IF IN EYES: Hold eye open and rinse slowly and gently with water for 15·20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. IF ON SKIN OR CLOTHING: Take off contaminated clothing. Rinse skin immediately with plenty of water for.15- 20 minutes. Call a poison control center or doctor for further treatment advice. Have the product container or label with you when calling a poison control center or doctor, or going for treatment. You may also contact 1-800-441-3637 for emergency medical treatment infonnation. PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS A.ND DOMESTIC ANIMALS Caution! Causes moderate eye irritation. Hannful if absorbed through skin. Avoid contact with skin, eyes or clothing. Wash thoroughly with soap and water after handling. PERSONAL PROTECTIVE EQUIPMENT Some of the materials that are chemical-resistant to this product are listed below. If you want more options, follow the instructions for Category A on an EPA chemical­ resistance category selection chart. Applicators and other handlers must wear:

• Long-sleev,~d shirt and long pants.
• Chemical-n,.istant gloves (Category A) made of materials sllch as butyl rubber ~14mils, natural rubber :::14mils, neoprene rubber :::14 mils, or nitrile rubber :::14 mils
• Shoes plus socks. Discard clothing and other absorbent materials that have been drenched, or heavily contaminated with this product. Follow manufacturer's instructions for cleaning I maintaining PPE. Ifno such instructions for washables, use detergent nnd hot water. Keep and wash PPE separately from other laundry. Engineering Control Statement: When handlers use closed systems or enclosed cabs in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for aglicultural pesticides [40 CFR Part 170.240 (d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS. USER SAFETY RECOMMENDATIONS USERS SHOULD: - Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible. wash thoroughly and change into clean clothing. ENVIRONMENTAL HAZARDS Do not apply directly to water, or to areas where surface water is present, or to intertidal areas below the mean high water mark. Do not apply when weather conditions favor drift from areas treated. Do not contaminate water by cleaning of equipment or disposing of equipment washwaters or wastes. Do not allow sprays to drift onto adjacent desirable plants.

IMPORTANT DuPont™ FlNESSE® Grass & Broadleaf(mp) is recommended for use on land primarily dedicated to the long-term production of wheat. Read these entire Directions for Use, and the Limitation of Warranty and Liability, before using this product. PESTICIDE HANDLING ._ • Calibrate sprayers only with clean water away from the well site. • Make scheduled checks of spray equipment. '. Assure accurate measurement of pesticides by all operation employees. • Mix only enough product for the job at hand. • Avoid over-filling of spray tank. • Do not discharge excess material on the soil at a single spot in the field/grove or mixing/loading station. • Dilute and agitate excess solution and apply at labeled rates/uses. • Avoid storage of pesticides near well sites. • Do not mix, load or clean spray equipment within 33 feet of well-heads or aquatic systems, including marshes, ponds, ditches, streams. lakes, etc. • Do not apply within 50 feet of well-heads or the above mentioned aquatic systetns. DIRECTIONS FOR USE It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation. AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labelinf and with the Worker Protection Standard, 40 CFR Part 70. This Standard contains requirements for the protection of agricultural workers on fanns, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for traimng, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted-entry interval. The '. reqUIrements in this box only a~ply to uses of this product that are covered by the Worker Protection Standard. Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours. PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that mvolves contact with anything that has been treated. such as plants, soil, or water, IS: ' ~Coveralls -Chemical-resistant gloves (Category A) made of materials such as butyl rubber ?,14mtls, natural rubber ?,14mils, neoprene rubber 2:14 mils, or nitrile rubber 2:.14 mils -Shoes plus socks. 2 FlNESSE® Grass & Broadleaf(mp) must be used only in accordance wKth recommendations on this label or in separate published DuPont recommendations. DuPont will not be responsible for losses or damages resulting from the use of this product in any manner not specifically recommended by DuPont. Do not apply this product through any type ofirrigation system. Do not lIse flood irrigation to apply or incorporate FINESSE® Grass & Broadleaf (mp). FINESSE® Grass & Broadleaf (mp) is not for sale or use in Idaho, Oregolll, Washington, Montana, Wyoming or Minnesota. GENERAL lNFORMATION FlNESSE® Grass & Broadleaf(mp) herbicide is a convenient unit pack that is mixed in water and applied as a spray. Open package completely and empty contents of both compartments into spray tank. FlNESSE® Grass & Broadleaf(mp) controls weeds in wheat (including duntm). Apply FlNESSE® Grass & Broadleaf(mp) as a uniform broadcast spray according to the recommendations given in this label. Failure to follow these directions may result in a reduction in weed control/suppression and/or a potential for crop injury. A surfactant should be used in the spray mix unless otherwise specified on this label. FlNESSE® Grass & Broadleaf(mp) is noncorrosive, nonflammable, nonvolatile, and does not freeze. FlNESSE® Grass & Broadleaf(mp) controls some broadleaf weeds by preemergence activity, and both grass and broadleaf weeds by postemergence activity. For best preemergence results, apply bdore weed seeds genninate. Use sprinkler irrigation or allow rainfall to move FlNESSE® Grass & Broadleaf (mp) 2-3" deep into the soil profile. For best postemergence results, apply FlNESSE® Grass & Broadleaf (mp) to young, actively growing weeds. The degree and duration of control may depend on the following: 'weed spectrum and infestation intensity 'weed size at 3pplication -environmental conditions at and following treatment. ENVIRONMf,NTAL CONDITIONS AND BIOLOGICAlc ACTIVITY FlNESSE® Grass & Broadleaf(mp) is absorbed through the roots and foliag'; of susceptible weeds, rapidly inhibiting their growth. One to 11 weeks after application to weeds, leaves of susceptible plants appear chlorotic, and the growing point subsequently dies. Postemergence application of FlNESSE® Grass & Broadleaf (mp) provides the best control in vigorously growing crops that shade competitive weeds. Weed control in areas of thin crop stand or seeding skips may not be as satisfactory. However, a crop canopy that is too dense at application can intercept spray and reduce weed control.

DuPont™ FINESSE® Grass & Broadleaf{mp) may injure crops that are stressed from adyerse environmental conditions (such as extreme temperatures or moisture), abnormal soil conditions, or cultural practices. In addition, different varieties of the crop may be sensitive to treatment with FINESSE® Grass & Broadleaf (mp) under otherwise normal conditions. Treatment of such varieties may injure crops. In warm, moist conditions, the expression of herbicide symptoms is accelerated in we,cds; in cold, dry conditions, expression of herbicide symptoms is delayed. Abnormal environmental conditions (excess soil moisture, drought, or extreme cold weather) can affect herbicidal activity and may reduce levels of weed control-resulting in weed stunting rather than weed death. In addition, weeds hardened-off by drought stress are less susceptible to FINESSE® Grass & Broadleaf (mp). Postemergence weed control may be reduced if rainfall occurs soon after application. Do not apply when rain is expected within the next hour after application. APPLICATION TIMING FINESSE® Grass & Broadleaf{mp) must always be applied postemergence to crop and grass weeds. Do not apply preemergence, or before crop emergence is completed. To avoid crop injury, apply FINESSE® Grass & Broadleaf{mp) before jointing begins. Do not make more than one application ofFINESSE® Grass & Broadleaf{mp) per growing season. FINESSE® Grass & Broadleaf (mp) herbicide may be applied in the winter as long as daytime temperatures reach 40"F. Winter Wheat: Apply anytime after the crop has 2 leaves, but before jointing begins. Treat late-seeded winter wheat after the crop h" started to tiller since the combined effect of herbicide stress and stress from cold weather andlor moisture could cause crop injury. Spring Wheat and Durum: Apply anytime after emergence, but before the majority of plants have 4 total leaves on the main stem plus 2 tillers. Do not apply after jointing begins. Note­ Apply to Vic durum after early tillering, but before boot. RATE OF APPLICATION AND WEEDS CONTROLLED OR PARTIALLY CONTROLLED FINESSE® Grass & Broadleaf (mp) is a unit pack product which will treat up to 30 acres of wheat as a broadcast application. Refer to the following table for acres treated by Rate I, Rate II, and Rate 1II ofFINESSE® Grass & Broadleaf{mp). FINESSE® Grass & Broadleaf(mp) Rate Rate I Rate II Rate III Number of acres treated with one 18 ounce unit pack of FINESSE® Grass & Broadleaf (mp) 30 25 20 FINESSE® Grass & Broadleaf{mp) will provide control or partial control of the following weeds when applied at the specified rates and application timing. 3 GRASS WEED RECOMMENDATIONS FINESSE® Grass & Broadleaf (mp) Grass Stage' Rate I Rate II Rate !II Grass Weeds Annual (-leaf to Ryegrass .... 2-tillers NR" C C Downy Brome I-Ieafto (Bromus tec/orum) 3-leaf NR NR PC Cheat (Bromus I-leaf to secalinus) 2-tillers C# C C Japanese Brome (Bromus r-Ieafto japonicus) 2~tilters C# C C Rescuegrass (Bromus I-leaf to catharticus) 3-le.f NR PC PC Wild Oat I-leaf to (Avena (Qtua) 2-tillers NR C## C *Use rates II (I,r [II when grass weed infestations are high. Application bt!yond the recommended grass weed stage can result in redu(:ed performance and only partial control, or suppression, of target grass weeds. "NR = Not R(:commended; C = Control' PC = Partial Control (partially controlled weeds exhibit a visual annuai reducti(ln in numbers andlor a significant loss of vigor). ••• IfFINESS:E® Grass & Broadleaf{mp) is applied in a tank­ mix combination with a 2.4-D containing broadleafherbicide, Annual Ryegrass control may be reduced.

For control of these weed species at the reduced rate, liquid

nitrogen fertilizer as a carrier solution of 50% or greater must be added to the tank mix.

For light to moderate populations only.

I BROAD LEAF WEED RECOMMENDA nONS "'NR = Not Recommended; Broadleaf DuPont™ FrNESSE® Grass & Broadleaf (mp) "PC = Partial Control (partially controlled weeds exhibit a visual Weeds Rate I Rate II Rate III reduction in numbers andlor a significant loss of vigor). NR' PC·· PC "·C=Control. Bedstraw + Naturally oCI:ulTing resistant biotypes of these weeds are known Black Mustard C··· C C to occur. See the Tank Mixtures and Resistance sections on this Blue Mustard C C C label for additional information. Bur beakchervil NR PC C SPECIFIC WEED PROBLEMS Bushy Wallflower/ Annual Ryegrass : Apply FINESSE® Grass & Broadleaf Treacle Mustard C C C (mp) early postemergence when Annual Ryegrass is I leaf Buttercu2 NR PC C to tillering stage of growth. Under abnormally wet Canada thistle NR PC PC conditions, fall applications may not adequately control Coast Fiddleneck Annual Ryegrass and/or broadleafweeds that germinate in !tarweed) NR PC C the spring. Common chickweed NR PC C Common sroundsel NR PC C Canada Thi!:t\e: Apply FINESSE® Grass & Broadleaf Conical catchfl;:! C C C (mp) with surfactant after the majority of thistles have Com,IE0mwell NR PC PC emerged and while they are small (rosette stage to 4"-6" tall) and actively growig. For maximum long-tenn effect, Curl dock C C C yearly treatment may be required. Com sE:u!!! NR PC C I Cow cockle NR .PC C Flixweed, Ta.nsymustard: Apply FINESSE® Grass & Cutleaf evening Broadleaf(mp) when weeds are small and actively growing. I!rimrose C C C Ifweeds are inactive due to cold, dry weather before andlor False chamomile NR PC C after treatment, delay application until moisture and Falseflax NR PC C temperature conditions are favorable for active weed Field eenncress C C C growth. Under these conditions, FINESSE® Grass & Flixweed C C C Broadleaf (mp) may be tank-mixed with another herbicide Hemenettle C C C that is effective on these weeds, such as 2,4-0 (use a Henbit C C C minimum of 1!4 lb. active ingredient per acre of2,4-D). Kochia + NR PC PC Kochia: Naturally occurring biotypes resistant to Ladsthumb NR PC C FINESSE® Grass & Broadleaf(mp) are known to occur. Lambsguarter NR PC C For best results, use FINESSE® Grass & Broadleaf(mp) in MaEeed C C C a tank mix with Starane, Starane + Salvo, or bromoxynil Miners lettuce C C C containing products (such as "Buctril", "Bison", "Bronate" Mouseear chickweed NR PC C or "Bronate Advanced"). FINESSE® Grass & Broadleaf Pennsylvania (mp) should be applied in the spring when kochia are less smartweed NR PC PC than 2" tall and are actively growing (refer to the Tank Pineaeeleweed C C C Mixtures section of this label for additional details on rates ( Pigweeds (redfoot, and restrictions). smooth, prostrate, Plains coreopsis: In the late winter or very early spring, tumblel C C C apply either DuPont™ ALL Y® XP at 0.1 ounce!acre, or Prickl;:! lettuce + NR PC PC ALL Y® EXTRA at 0.4 ounce!acre, after application of Prostrate knotweed NR PC PC FINESSE® Grass & Broadleaf(mp) to control Plains Purslane {common~ NR PC C coreopsis. Redstem filaree NR PC C Russian thistle + NR PC PC Russian thistle, Prickly lettuce: Naturally occurring Sheeherd's-E:urse C C C biotypes resistant to F1NESSE® Grass & Broadleaf(mp) of these weeds are known to occur. For best results, use Seeedwell NR PC PC FINESSE® Grass & Broadleaf(mp) in a tank mix with Sunflower NR PC PC bromoxynil containing products (such as "Buctril", "Bison", Tan~ustard C C C "Bronate" or "Bronate Advanced"). FINESSE® Grass & Volunteer canola NR PC PC Broadleaf(mp) should be applied in the spring when Wate!:E0d C C C Russian thisne and prickly lettuce are less than 2" tall or 2" White cockle NR PC C across, and are actively growing (refer to the Tank Mixtures Wild buckwheat NR PC PC . section of this label for additional details on rates and Wild carrot NR PC C restrictions) . Wild garlic/wild Lambsquart"rs: For best results, apply FINESSE® Grass onion NR PC PC Wild mustard C C C & Broadleaf(mp) in the fall. For best postemergence Wild radish NR PC PC suppression, apply FINESSE® Grass & Broadleaf(mp) plus Wild rnmip NR PC C 2,4-0 after th" majority of weeds have emerged (less than 2" tall or 2" across) and are actively growing. Soil moisture should be adequate, and daily temperatures should reach at least 60 OF. 4

( ( Prostrate Knotweed: For best resuIts, apply in the fall. Sunflower (New Mexico, Oklahoma (Panhandle), and Texas): For best resuIts, apply DuPont™ FINESSE® Grass & Broad leaf (mp) after the majority of sunflowers have emerged, are actively growing, and are not more than 2" tall. Wild Buckwheat: For postemrgence applications, tank mix with 2,4-D, "Buctril", "Bison", "BroDate", or "SroDate Advanced" and surfactant, and apply after the majority of seedlings have emerged and are actively growing. Wild GarliclWild Onion: FINESSE® Grass & Broadleaf (mp) provides aerial bulblet control only. TANK MIX INFORMATION AND PRECAUTIONS Tank Mjxhlfes with Djcamba: Tank mixtures ofFINESSE® Grass & Broadleaf (mp) with Dicamba may result in reduced control of grass weeds. Tank Mixes with Insecticides: FINESSE® Grass & Broadleaf(mp) may be tank mixed with insecticides registered for use on wheat. However. under certain conditions (stress from drought, cold weather or wann days and cold nights following application, or crops in the 24 leafstage), tank mixtures or sequential treatments of FINESSE® Grass & Broadleaf(mp} and organophosphate insecticides (such as methyl or ethyl parathion, "Di-Syston", etc.) may produce temporary crop yellowing or, in severe cases, crop injury. Test these mixtures in a small area first. . Ifno symptoms of crop injury occur 14 days after treatment, treat the rest of the acreage. Do not use I:'INESSE® Grass & Broadleaf(mp} plus Malathion, as crop injury may result. Do not apply FINESSE® Grass & Broadleaf(mp} within 60 days of crop emergence where an organophosphate insecticide (such as "Di-Syston") has been applied as an in­ furrow treatment, as crop injury may result. Surfactants : Unless otherwise specified, add a non-ionic surfactant (NIS) having at least 80% active ingredient at 0.5% v/v (2 quarts per 100 gallons of spray solution). Antifoaming agents may be used if needed. If another herbicide is tank mixed with FINESSE® Grass & Broadleaf (mp), select adjuvants authorized for use with all the tank­ mix partner frerbicides. Adjuvants must contain only EPA­ exempt ingredients (40 CFR 180.1001). Ammonium Nitroen FertjIjzer: In addition to a non-ionic surfactant, use 2 qt. lacre of a high-quality urea ammonium nitrate (UAN), such as 28%N or 32%N, or 2 Ibs.!are of a spray-grade ammonium sulfate (AMS). Use 4 qtiacre UAN or 4 Ibs.!acre AMS under arid conditions. , Do not use low rates of liquid fertilizer as a substirute for surfactant. Carrier Solutions (With Liquid NjtrQllen Solution Fertilizer): Liquid nitrogen fertilizer solutions may be used as a carrier in place of water. Run a tank mix compatibility test before mixing FINESSE® Grass & Broadleaf(mp} in fertilizer solution. 5 FINESSE® Grass & Broadleaf(mp) must first be slurried with water ~ then added to liquid nitrogen solutions (e.g., 28-0-0, 32-0-0). Ensure that the agitator is running while F1NESSE® Grass & Broadleaf(mp} is added. Note that use of fertilizer as the carrier may result in temporary crop yellowing and stunting. If using rates of liquid nitrogen fertilizer in the spray solution that are less than 50% of the spray solution volume, the addition of non-ionic surfactant is necessary. Add surfactant at 1/2 pint to I quart per 100 gallons of spray solution (0.06.3 to 0.25% v/v) based on local recommendations. When using rates of liquid nitrogen fertilizer in the spray solution that arc greater than 50% of the spray solution, adding surfactant increases the risk of crop injury. Consult your agricultural dealer, consultant, fieldsman, or DuPont representative for a specific recommendation before adding surfactant to these tank mixtures. TANK MIX1-URES FlNESSE® Grass & Broadleaf(mp) may be tank mixed with other suitahle registered herbicides to control weeds that are listed on this label as partially controlled, weeds resistant to FINESSE® Grass & Broadleaf(mp}, andlor weeds not list<:d on this label as controlled. Read and follow all manufacturer's label recommendations for the companion herbicide. If those recommendations conflict with this label" do not tank mix the herbicide with FINESSE® Grass & Broadleaf(mp}. Use the most restrictive labe'i limitations for each product used in the tankmix. IfFINESSE® Grass & Broadleaf(mp) is applied in a tank mix with a dicamba containing broadleafherbicide, grass control may b" reduced. Do not apply FINESSE® Grass & Broadleaf(mp} in combination with MCPA/MCPA Ester (MCPE) within 72 hours of frost. Wilh 2,4-D (amine or esler) When applying to winter wheat, FINESSE® Grass & Broadleaf(mp) may be used as a tank-mix treatment with a 2,4-D containing herbicide (preferably ester formulations). For best resuits, add 2,4-D herbicides to the tank at 118 to 1/4 Ib active ingredient per acre. Apply FINESSE® Grass & Broadleaf(mp) plus 2,4-D after tillering (refer to appropriate 2,4-D's manufacturer's label). Tank mixtures of FINESSE® Grass & Broadleaf(mp} plus 2,4-D may result in reduced control of grass weeds. Unless otherwise recommended by DuPont, do not add a surfactant when mixing with 2A-D ester formulations.

( With Bromoxynil containing products (such as "Buctril", "Bison"J "Bronale" or "Bronate Advanced', OuPont™ FINESSE® Grass & 8roadleaf(mp) may be tank mixed with bromoxynil containing herbicides registered for use on wheat. For best results, add bromoxynil containing herbicides to the tank at 3 to 6 oz active ingredient per acre (such as "Bronate" or "Bison" at 3/4 - 1 112 pt per acre). Tank mixes ofFINESSE® Ghiss & 8roadleaf(mp) plus bromoxynil may result in reduced control of Canada thistle. With "Starane", UStarane + Salvo" For improved control ofKochia (2" tall) FINESSE® Grass & 8roadleaf(mp) may be tank mixed with 113 to 2/3 pints per acre ofStarane, 2/3 to I 1/3 pints per acre ofStarane + Salvo. Refer to the DuPont herbicide label, and the Starane, Starane + Salvo labels for infonnation regarding use restrictions, labeled crops, rotational cropping recommendations, sprayer cleanup, use precautions and other information. 2,4-0 herbicides (preferably ester formulations) may be tank mixed with FINESSE® Grass & 8roadleaf(mp) plus Starane. Consult local recommendations and the Tank Mixtures section of this label for additional infonnation. With "Aim" FINESSE® Grass & Broadleaf (mp) can be tank mixed with "Aim" herbicide for improved control of weeds in wheat. Refer to the "Aim" label for infonnation regarding use restrictions, labeled crops, rotational cropping recommendations, sprayer cleanup, use precautions and other infonnation. With "Stinger" or "Curtail" FINESSE® Grass & Broadleaf (mp) can be tank mixed with "Stinger" or "Curtail" herbicides for improved control of weeds in wheat. Refer to the "Stinger" or "Curtail" label for infonnation regarding use restrictions, labeled crops, rotational cropping recommendations, sprayer cleanup, use precautions and other information. GROUND APPLICATION To obtain optimum spray distribution and thorough coverage use flat-fan nozzles. • For best performance, select nozzles and pressure that deliver MEDIUM spray droplets. Nozzles that deliver COARSE spray droplets may be used to reduce drift, provided spray volume is increased to maintain coverage on small weeds. For optimal product performance and minimal spray drift, adjust the spray boom to the lowest possible spray height recommended in manufacturers' specifications. • Overlaps or starting, stopping, slowing, and turning while spraying may result in crop injury. . • When using flat-fan nozzles, use a spray volume 'of at least 5 gal per acre (GPA) at 30 to 50 PSI to ensure proper weed coverage. • Use screens that are 50-mesh or larger. 6 AERIAL APPLICATION Apply in wat,er using a minimum spray volume of 3 gallons/acre. Use a minimum of 5 gallons/acre under dry conditions or heavy weed infestations. For best results, include I gallon of 28-0-0, or I gallon of32-0-0, . ammonium nitrogen fertilizer plus 0.5% surfactant. Use nozzles that provide 200 to 350 micron size droplets for best results, and to insure unifonn spray coverage. Aerial application ofFINESSE® Grass & Broadleaf(mp) should be made with low drift nozzles at a maximum height of 10 feet above thl~ crop and at a maximum pressure of 40 psi. Do not apply aerially when wind speed is greater than 10 mph. Do not allow spray to drift onto adjacent crops,.as injury may Ol:cur. CROP ROTATION Before using FINESSE® Grass & Broadleaf(mp), carefully consider YOUli crop rotation plans and options. For rotational flexibility, it is recommended to not treat all of your wheat acres at the same time. MINIMUM RECROPPING INTERVALS Minimum re(:ropping intervals· are determined by the rate of break dow II ofFlNESSE® Grass & Broadleaf(mp) applied. FINESSE® Grass & Broadleaf(mp) breakdown in the soil is allected by soil pH, soil temperature, and soil moisture. Low soil pH, high soil temperature, and high soil moisture increase FINESSE® Grass & Broadleaf(mp) breakdown ill soil, while high soil pH, low soil temperature, and low soillllloisture slow FINESSE® Grass & Broadleaf (mp) breakdown. Of these thre,e factors, only soil pH remains relatively constant. Soil temperature, and to a greater extent, soil moisture, can vary significantly from year to year and from area to area. For this reason, soil temperatures and soil moisture should be monitored regularly when considering recropping. • The minimum recropping interval represents the period of time from the last application to the anticipated date of the next planting. Before using FINESSE® Grass & Broadleaf(mp), carefully consi.der your crop rotation plans and options. For rotational flexibility, do not treat all of your wheat acres at the same time. SOIL PH L.IMITATIONS FINESSE® Grass & Broadleaf(mp) should not be used on soils having" pH above 7.9,.as extended soil residual activity could extend crop rotation intervals beyond normal, and under ce:rtain conditions, could injure wheat. In addition, oth," crops planted in high-pH soils can be extremely sensitive to low concentrations ofFINESSE® Grass & Bro"dleaf (mp). . Checking Sod pH 8efore using FlNESSE® Grass & 8roadleaf(mp), determine th" soil pH of the areas of intended use. To obtain a representative pH value for the test area, take several 0 to 4" samples fi'om different areas of the field and analyze them separat,ely. Consult local extension publications for additional informationon recommended soil sampling procedures.

( Rotation Intervals for Cereal Crops· Location All Areas NE,KS. OK. TX Crop Wheat Barley Minimum Rotation . Soil pH Interval (months) • 7.9 or lower 4 7.9 or lower lO • Unless a crop rotation interval is specified, a field bioassay must be completed before rotating to any crop not listed. See "Bioassay" section of this label for infonnatidn on conducting a field bioassay in target areas. Rotation Intervals for STS Soybeans Location All Areas Crop STS Soybeans SoU pH All Minimum Rotation Interval (months) * 9 • Unless a crop rotation intervaJ is specified, a field bioassay must be completed before rotating to any crop not listed. See "Bioassay" section of this label for infonnation on conducting a field bioassay in target areas. 7 Rotation Intfrvals for Other Noncereal Crops· Location State County or Area Minimum Cumulative Rotation Precipitation Interval Crop Soil pH (Inches) (months)· KS Central (E. of Hwy 183, W. of the Flinthills) Soybeans·· 7.5 or 25 14 lower 7.6107.9 46 26 W. Central & Westem(generally WestofHwy.183 to the Wt$tern edge of Grant, Kearny, Logan. Rawlings, Slevens. Thomas and Wichita counties) Soybeans 7.5 or 40 24 lower 7.6107.9 60 36 NE Far Western· In the last ti,!r of counties 'llong the KS/CO border (Cheyenne, Greeley, Hamilton. Monon. Sherman. Stanton, and WaJ Illce 1 S. Central (Franklin, Nuckolls. Thayer arjd Western counties) Western (W. of Hwyl83 to WY bordlr) Soybeans 7.s or lower 7.6 to 7.9 Soybeans 7.5 or lower 7.6 to 7.9 Soybeans 7.5 or lower 7.6 to 7.9 OK East of thl! Soybeans 7.9 or lower Panhandlt~ TX Eastern counties Soybeans 7.9 or (Archer. Bell. lower Bosque. Bowie, Camp. Cass, Clay, Colin. Cooke. Coryell, Dallas. Delta, Denton. Ellis. Fall!>. Fannin. Franklin. Grayson. Hill. Hood. Hopkins. Hunt. Jack. Johnson. Kaufinan, Lamar, Limestone. Mclennan. Milam. Mo:mtague. Morris, Navarro. Palo Pinto, Parker. Rains. Red River. Robertson, Rockwall, Somervell. Tarrent, Titus. Upshur. Van Zandl, Wichita, Williamson. Wise, Wood and Young) 36 26 60 48 2S 14 46 26 40 24 60 36 2S 14 2S 14 • Unless a crop rotation interval is specified, a field bioassay must be completed bc:fore rotating to any crop not listed. See "Bioassay" section of this label for infonnation on conducting a field bioassay in target areas. ··Non·STS soybeans. BIOASSAY A field bioassay must be completed before rotaling to any crop nOllisted (See Ihe Rotalion Intervals lable), or if the soil pH is not in the specified range. or if the minimum cumulalive p",cipitalion has nol occurred since application.

(." . . , (' Field Bioassay To conduct a field bioassay, grow test strips of the crop or crops you plan to grow the following year in fields previously treated with DuPont™ FINESSE® Grass & Broadleaf(mp). Crop response to the bioassay will indicate whether or not to rotate to the crop( s) grown in the test strips. If a field bioassay is planned, 'check with your local DuPont representative for infonnatio,n detailing the field bioassay procedure. . GRAZING Treated wheat fields may be grazed at anytime. Note: For best results, apply FINESSE® Grass & Broadleaf (mp) 5-7 days before grazing. Grazing under wet soil conditions may reduce grass weed control or suppression. MIXING INSTRUCTIONS I. Fill the tank 1/4 to 1/3 with clean water. 2. While agitating, add the required amount of FINESSE® Grass & Broadleaf(mp) . 3. Continue agitation until the FINESSE® Grass & Broadleaf(mp) is fully dispersed, at least 5 minutes. 4. Once the FINESSE® Grass & Broadleaf(mp) is fully dispersed, maintain agitation and continue filling tank with water. FINESSE® Grass & Broadleaf(mp) should be thoroughly mixed with water before adding any other material. 5. As the tank is filling, add tank mix partners (if desired) then add the necessary volume of nanionic surfactant. Always add surfactant last. Antifoaming agents may be used. 6. If the mixture is not continuously agitated, settling will occur. If settling occurs, thoroughly re-agitate before using. 7. Apply FINESSE® Grass & Broadleaf(mp) spray mixture within 24 hours 'of mixing to avoid product degradation. 8. IfFINESSE® Grass & Broadleaf(mp) and a tank mix partner are to be applied in multiple loads, pre-slurry the FINESSE® Grass & Broadleaf(mp) in clean water prior to adding to the tank. This will prevent the tank mix partner from interfering with the dissolution of the FINESSE® Grass & Broadleaf(mp). Do not use FINESSE® Grass & Broadleaf(mp) with spray additives that reduce the pH of the spray solution to below 3~ :. SPRAY EQUIPMENT • For specific application equipment, refer to the manufacturer's recommendations for additional information on GPA, pressure, speed, nozzle types and arrangements, nozzle heights above the target canopy, etc. • Be sure to calibrate air or ground equipment prope"rly before application. Select a spray volume and delivery system that will ensure thorough coverage and a unifonn spray pattern with minimum drift. Use higher spray volumes to obtain better coverage when crop canopy is dense. Avoid swath overlapping, and shut off spray booms 8 while starting, turning, slowing, or stopping, to avoid injury to tht~ crop. • Do not make applications using equipment and/or spray volumes or under weather conditions that might cause spray to drift onto nontarget sites. For additional information on spray drift, refer to the Spray Drift Management section of this label. • Continuous agitation is required to keep FINESSE® Grass & Broadleaf(mp) in suspension. SPRAYER CLEANUP Spray equipment must be cleaned before FINESSE® Grass & Broadleaf(mp) is sprayed. Follow the cleanup procedures . specified on the labels of previously applied products. If no directions are provided, follow the six steps outlined in After Spraying FINESSE® Grass & Broadleaf(mp) below. At the End ,of the Day When multipl:e loads of FINESSE® Grass & Broadleaf (mp) herbicide are applied, it is recommended that at the end of each day of spraying, the interior of the tank be rinsed with fresh water and then partially filled, and the boom and hoses flushed. This will prevent the buildup of dried pesticide deposits, which can accumulate in the application equipment. After Spraying F1NESSE® Grass & Broad/eaf (mp) and Before Spraying Crops Other Than Wheat To avoid subsequent injury to desirable crops, thoroughly clean all mixing and spray equipment immediately following applications of FINESSE® Grass & Broadleaf (mp) as follows:

1. Drain tank: thoroughly rinse spray tanks, boom, and hoses with clean water. Loosen and physically remove any visible deposits.
2. Fill the tank with clean water and I gal of household ammonia· (contains 3% active) for every 100 gal of water. Flush the hoses, boom, and nozzles with the cleaning solution. Then add more water to completely filJ the tank. Circulate the cleaning solution through the tank and hoses for at least 15 min. Flush the hoses. boom, and nozzles again with the cleaning solution, and then drain the tank.
3. Remove the nozzles and screens and clean separately in a bucket containing cleaning agent and water.
4. Repeat step 2.
5. Rinse the tank. boom, and hoses with clean water.
6. If only Ammonia is used as a cleaner, the rinsate solution may be applied back to the crop(s) recommended on this labeL Do not exceed the maximum labeled use rate. If other cleaners are used, consult the cleaner label for rinsate disposal instructions. If no instructions are given, dispose of the rinsate on site or at an approved waste disposal fadlity. • Equivalent amounts of an alternate-strength ammonia solution or a DuPont~approved cleaner can be used in the cleanout procedure. Carefully read .md follow the individual cleaner instructions. Consult your Agricultural dealer, applicator, or DuPont representative for a listing of approved cleaners.

( ( Notes:

1. Caution: Do not use chlorine bleach with ammonia, as dangerous gases wilt fonn. Do not clean equipment in an enclosed area.
2. Steam.c1eaning spray tanks is recommended prior to performing the above c1eanout procedure to facilitate the removal of any caked deposits. .'
3. When DuPontT" FINESSE® Grass & Broadleaf (mp) is tank mixed with other pesticides. all required c1eanout procedures should be examined and the most rigorous procedure should be followed.
4. In addition to this cleaneut procedure, all precleanout guidelines on subsequently applied products should be followed as per the individual labels.
5. Where routine spraying practices include shared equipment frequently being switched between applications ofFINESSE® Grass & Broadleaf(mp) and applications of other pesticides to FINESSE® Grass & BroadJeaf(mp) sensitive crops during the same spray season, it is recommended that a sprayer be dedicated to FINESSE® Grass & Broadleaf (mp) to further reduce the chance of crop injury. SPRAY DRIFT MANAGEMENT The interaction of many equipment and weather-related factors determines the potential for spray drift. The applicator is responsible for considering all these factors when making application decisions. Do not allow this product to drift onto other crops, especially canola. tame oats, or other non-target crops. AVOIDING SPRA Y DRIFT IS THE RESPONSIBILITY OF THE APPLICATOR. IMPORTANCE OF DROPLET SIZE - GROUND APPLICATION The most effective way to reduce drift potential is to apply large droplets (> 150 - 200 microns). The best drift management strategy is to apply the largest droplets that provide sufficient coverage and control. The presence of sensitive species nearby, the environmental conditions, and pest pressure may affect how an applicator balances drift control and coverage. APPLYING LARGER DROPLETS REDUCES DRIFT POTENTIAL, BUT WILL NOT PREVENT DRIFT IF APPLICATIONS ARE MADE IMPROPERLY OR UNDER UNFAVORABLE ENVIRONMENTAL CONDITIONS! See Wind, Temperature and Humidity, and Surface Temperature Inversions sections of this label. Controlling Droplet Size - General Techniques Volume - Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with higher rated flows produce larger droplets. Pressure - Use the lower spray pressures recommended for the nozzle. Higher pressure reduces droplet size and does not improve canopy penetration. WHEN HIGHER FLOW RATES ARE NEEDED, USE A HIGHER­ CAPACITY NOZZLE INSTEAD OF INCREASING PRESSURE. Nozzle Type - Use a nozzle type that is designed for the intended application. With most nozzle types, narrower 9 spray angles produce larger droplets. Consider using low-drift nozzles. . BOOM LENGTH AND HEIGHT - GROUND APPLICATION Boom Height - Setting the boom at the lowest height which provides uniform coverage reduces the exposure of droplets to evaporation and wind. The boom should remain level with the crop and have minimal bounce. WIND - Gt;!OUND APPLICATION Drift potential increases at wind speeds offess than 3 mph (due to variable direction and inversion potential) or more than \0 mph. However, many factors, including droplet size and equipment type determine drift potential at any given wind speed. A VOID APPLICATIONS DURING GUSTY OR WINDLESS CONDITIONS. Note: Local tc:rrain can influence wind patterns. Every applicator should be familiar with local wind patterns and how they effect spray drift. AERIAL DRIFT REDUCTION ADVISORY INFORMATION The following drift management requirements must be followed to avoid off-target drift movement from aerial applications to agricultural field crops. These requirements do not apply to forestry applications, public health uses or to applications using dry formulations. I. The distance of the outer most nozzles on the boom must not exceed 3/4 the length of the wingspan or rotor.
6. Nozzles must always point backward, parallel with the air stream and never be pointed downwards more than 45 degrees. INFORMArlON ON DROPLET SIZE - AERIAL APPLICATlON The most effective way to reduce drift potential is to apply large droplets. The best drift management strategy is to apply the largest droplets that provide sufficient coverage and control. Applying larger droplets reduces drift potential, but 'will not prevent drift if applications are made improperly, 0" under unfavorable environmental conditions (see Wind, Temperature and Humidity, and Temperature Inversions). Controlling Droplet Size - Aerial Application Volume - Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with higher rated flows produce larger droplets. Pressure - Do not exceed the nozzle manufacturer's recommended pressures. For many nozzle types, lower pressure produces larger droplets. When higher flow rates are net:ded, use higher flow rate nozzles instead of increasing pressure. Number of Nozzles - Use the minimum number of nozzles that provide uniform coverage. Nozzle Ori,'ntation - Orienting nozzles so that the spray is released parallel to the airstream produces larger droplets than other orientations and is the recommended practice. Significant deflection from horizontal will reduce droplet size and increase drift potential. 'I/'~

( ( Nozzle Type - Use a nozzle type that is designed for the intended application. With most nozzle types, narrower spray angles produce larger droplets. Consider using low-drift nozzles. Solid stream nozzles oriented straight back produce the largest droplets and the lowest drift. BOOM LENGTH - AERIAL APPLICATION For some use patterns. reducing the effective boom length to less than 3/4 of the wingspan or rotor length may further reduce drift without reducing, swath width. APPLICATION HEIGHT - AERIAL APPLICATION Applications should not be made at a height greater than 10 feet above the top of the largest plants unless a greater height is required for aircraft safety. Making applications at the lowest height that is safe reduces exposure of droplets to evaporation and wind. SWATH ADJUSTMENT-AERML APPLICATION When applications are made with a crosswind, the swath will be displaced downwind. Therefore, on the up and downwind edges of the field, the applicator must compensate for this displacement by adjusting the path of the aircraft upwind. Swath adjustment distance should increase, with increasing drift potential (higher wind, smaller drops, etc.) WIND - AERIAL APPLICATION Drift potential is lowest between wind speeds of2 to 10 mph. However, many factors, including droplet size and equipment type, determine drift potential at any given speed. Application should be avoided below 2 mph due to variable wind direction and high inversion potential. NOTE: Local terrain can influence wind patterns. Every applicator should be familiar with local wind patterns and how they affect spray drift. TEMPERATURE AND HUMIDITY When making applications in low relative humidity, set up equipment to produce larger droplets to compensate for evaporation. Droplet evaporation is most severe when conditions are both hot and dry. SURFACE TEMPERATURE INVERSIONS Drift potential is high during a surface temperarure inversion. Surface inversions restrict vertical air mixing, which causes small suspended droplets to remain close to the ground and move laterally in a concentrated cloud. Surface inversions are characterized by increasing. temperature with altitude and are common on nigh'ts with limited cloud cover and light to no wind. They begin to fonn as the sun sets and often continue into the morning. Their presence can be indicated by ground fog; however. if fog is not present. inversions can also be identified by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates a surface inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing. 10 SHIELDED SPRAYERS Shielding the boom or individual nozzles can reduce the effects of wind. However. it is the responsibility of the applicator to verify that the shields are preventing drift and not interfering with unifonn deposition of the product. RESISTANCE DuPont™ FINESSE® Grass & Broadleaf(mp) is an acetolactate synthase (ALS) inhibiting herbicide. When herbicides that affect the same biological site of action are used repeatedly over several years to control the same weed species in the :,ame field. naturally-occurring resistant biotypes may survive a correctly applied herbicide treatment, propagate, and become dominant in that fieid. Adequate control of these resistant weed biotypes cannot be expected. Ifw.:ed control is unsatisfactory, it may be necessary to rc:trcat the problem area using a product affecting a different site of action. To better manage herbicide resistance through delaying the proliferation and possible dominance of herbicide resistant weed biotypes, il may be necessary to change cultural practices within and between crop seasons such as using a combination of tillage, retreatment. tank-mix partners andlor sequential herbicide applications that have a different site of action. Weed escapes that are allowed to go to seed will promote the spread of resistant biotypes. See the Weeds Controlled section of this label for additional information on managing herbicide resistant weed biotypes. It is advisable 10 keep accurate records of pesticides applied to individual fields to help obtain information on the spread and dispersal of resistant biotypes. Consult your agricultural dealer. consultant, applicator, and/or appropriate state agricultural extension service representative for specific alternative cultural practices or herbicide recommendations available in your area. INTEGRATED PEST MANAGEMENT This product may be used as part of an Integrated Pest Managemenl (JPM) program that can include biological, cultural. and gl:netic practices aimed at preventing economic pest damage. IPM principles and practices include field s(;outing or other detection methods. correct target pest identification, population monitoring, and treating when target pest populations reach locally determined action thresholds. Consult your state cooperative extension service, professional consultants or other qualified authorities to detennin'e appropriate action treatment threshold levels for treating specific pest/crop systems in your area PRECAUTIONS For use only in wheat. Injury to or loss of desirable trees or vegetation may result from failure to observe the following: Do not apply, drain or flush equipment on or near desirable trees or other plants, or on areas where their roots may extend, or in locations where the chemical may be washed or moved into contact with their roots. Do not use on lawns, walks, driveways. tennis courts, or similar areas.

• ( '.". ( Injury to or loss of adjacent sensitive crops and vegetation may result from failure to oberve the following: Take all necessary precautions to avoid all direct or indirect contact (such as spray drift) with non-target plants Of areas. Carefully observe sprayer cleanup instructions, both prior to and after using this product, as spray tank residue may damage crops other thaOn wheat. Do not harvest grain sooner than 60 days after the application ofDuPont™ FINESSE® Grass & Broadleaf (mp). Wheat varieties may differ in their response to various herbicides. DuPont recommends that you first consult your state experiment station, university, or extension agent as to sensitivity to any herbicide. If no information is available, limit the initial use of FINESSE® Grass & Broadleaf(mp) to a small area. Do not apply FINESSE® Grass & Broadleaf(mp) to wheat that is stressed by severe weather c.onditions, drought, low fertility, water-saturated soil, disease or insect damage, as crop injury may result. Severe winter stress, drought, disease. or insect damage following application may also result in crop injury. Do not apply FINESSE® Grass & Broadleaf(mp) after jointing begins because crop injury may result. Do not apply to wheat undersown with legumes and grasses, a. injury to the forages will result. Do not apply to frozen ground where surface runoff may result. Do not apply to snow-covered ground. Do not apply to irrigated land where tailwater will be used to irrigate other cropland. To prevent crop injury due to cold weather, avoid early postemergence applications (2-4 leaf stage) to wheat during late fall or winter when cold weather conditions are unpredictable and can be severe. The combined effects of herbicide stre.5S plus cold weather stress can result in greater crop injury than either stress factor alone. Fall applications on coarse textured soils (especially those having a pH of greater than 7.0) may not provide adequate control or suppression of spring germinating weeds. To reduce the potential for movement of treated soil due to wind erosion, do not apply to powdery dry or light sandy soils until they have been stabilized by rainfall, trashy mulch, reduced tillage or other cultural practices. Injury to' immediately adjacent crops may result when treated soil is blown onto land used to produce crops other than cereal grains. For ground applications applied postemergence to weeds when dry, dusty field conditions exist; control of weeds in wheel track areas maybe reduced. The addition of2,4-D should improve weed control under these conditions: Preemergence applications of2,4-D or herbicides containing 2,4-D made within two weeks of planting spring cereals may cause crop injury when used in conjunction with early postemergence applications of FINESSE® Grass & Broadlcaf(mp). II Wherever FINESSE® Grass & Broadleaf(mp) is used on land previously treated with DuPont'" FINESSE®, DuPont™ ALL Y®, "Amber", "Assert", or other longer residual herbicides with the same mode of action, read the rotational guidelines on both labels and follow the one with the longest interval stated for your situation before choosing to rotate to crops other than wheat. PESTICIDE STORAGE AND DISPOSAL Pesticide Storage: Store product in original container only. Do not contaminate water, other pesticides, fertilizer, food or feed in storage. Pesticide Disposal: Do not contaminate water, food or feed by disposal. Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility. Container Disposal: Completely empty bag into application equipment. Then dispose of bag in a sanitary landfill, or by incineration, or, if allowed by State and local authorities, by burning. Ifbumed, stay out of smoke. NOTICE TO BUYER: Purchase of this material does not confer any rights under patents of countries outside of the United States. The DuPont Oval Logo, DuPont™, FINESSE® and ALLY® are trademarks or registered trademarks ofE. I. duPont de Nemours & Company, Inc. "Buctril", "Bronare, "Di-Syston" and "Bronate Advanced" are registered trademarks of Bayer Corporation. "Aim" is a registered trademark of FMC Corporation ·Stinger". "Curtail" and ·Starane"are registered trademarks of Dow AgroSciences "Starane + Salvo" is a registered trademarks of United Agri Products "Bison" is a registered trademark of Agriliance, LLC. "Amber" is a regi:.tered trademark of Syngenta Crop Protection Inc. "Assert" is a registered trademark of Micro Flo Company LLC D • 1036 ()921 05

• ( ( ' .. LIMITATION OF WARRANTY AND LIABILITY NOTICE: Read This Limitation of Warranty and Liability Before Buying or Using This Product. If the Terms Are Not Acceptable, Return the Product at Once, Unopened, and the Purchase Price Will Be Refunded. It is impossible to eliminate al1 risks associated with the use of this product. SQch risks arise from weather conditions, soil factors, off target movement, unconventional fanning techniques. prescnce of other materials, the manner afuse or application, or other unknown factors, all of which are beyond the control of DuPont. These risks can cause: ineffectiveness of the product; crop injury, or; injury to non-target crops or plants. . DuPont does not agree to be an insurer of these risks. WHEN YOU BUY OR USE THIS PRODUCT, TO THE FULLEST EXTENT PERMITTED BY LAW, YOU AGREE TO ACCEPT THESE RISKS. DuPont warrants that this product confonns to the chemical description on the label thereof and is reasonably fit for the purpose slated in the Directions for Use, subject to the inherent risks described above, when used in accordance with the Directions for Use under nannal conditions. DUPONT MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS OR OF MERCHANTABILITY OR ANY OTHER EXPRESS OR IMPLIED WARRANTY. TO THE FULLEST EXTENT PERMITTED BY LAW, IN NO EVENT SHALL DUPONT OR SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT. BUYER'S OR USER'S BARGAINED-FOR EXPECT A TION IS CROP PROTECTION. THE EXCLUSIVE REMEDY OF THE USER OR BUYER AND THE EXCLUSIVE LIABILITY OF DUPONT OR SELLER, FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES (INCLUDING CLAIMS BASED ON BREACH OF WARRANTY OR CONTRACT, NEGLIGENCE, TORT OR STRICT LIABILITY), WHETHER FROM FAILURE TO PERFORM OR INJURY TO CROPS OR OTHER PLANTS, AND RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SHALL BE THE RETURN OF THE PURCHASE PRICE OF THE PRODUCT, OR AT THE ELECTION OF DUPONT OR SELLER, THE REPLACEMENT OF THE PRODUCT. DuPont or its Ag Retailer must have prompt notice of any claim so that an immediate inspection of buyer's or user's growing crops can be made. Buyer and all users shall promptly notify DuPont or a DuPont Ag Retailer of any claims, whether based on contract, negligence. strict liability, other ton or otherwise or be barred from any remedy. This Limitation of Warranty and Liability may not be amended by any oral or written agreement. For product information call: 1-888-6-DUPONT Internet address: http://cropprotection.dupont.com/ @ 2005 E. I. du Pont de Nemours and Company, Wilmington, Delaware 19898. All rights reserved. 12