crop-chem-docs/corpus/epa_ppls/524-538.md

MON 78271 HERBICIDE

• EPA Reg No: 524-538
• Registrant: BAYER CROPSCIENCE, LLC
• Signal word: Warning
• Active ingredients: Glyphosate, potassium salt (44.6%)
• Label accepted: 2002-05-07
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000524-00538-20020507.pdf

---

U.S. ENVI RONMENTAL PROTECTION AGE.NCY Office of Pesticide Programs Registration Division (H7505C) 401 M" St., S.W. Washington, D.C. 20460 NOTICE OF PESTICIDE: -2L Registration __ Reregistration (under FI FAA, as amended) Name and Address of Registrant (include ZIP Code); Monsanto Company 600 13 th street, N.W. Suite 660 Washington, DC 20005 EPA Reg. Number: 524-538 Term of Issuance: Conditional Name of Pesticide Froduct: MaN 78271 Herbicide !' Changes· tti la'be!.:i.n di,ffel:'inq ill $,USt:aflC~ from,l;.hat accepted in C!onnct.ion: Wih this_ egist.ratioo .mU:!!It bs' sk:lmit,te:d, to and ccl5lpted ,:by t,ne Reqlstra-tion D1.v5ion pri.or to use of tl-).e label in COJ)1JllEH"Ce. l,n any or:rezpl:;rn:dnce on' ,_thif;' :,pfoduct ,always refer' to, thlP" abOve E;PA reqistrati<ln, numbe~,~ ,~ On the basis of information furnished by the registrant, the above named pestic"'ide is hereby registered/reregistered under the federal Insecticide, fungicide and Rodenticide A,.:::t. Registration is in no way to be construed as an endorsement or recommend3.tion of this product by the Agency. In order to protect health and the environment, the Administrator, on his motion, maj at any time suspend or cancel the registration of a pestici.de in accordance with the Act. The acceptance of -3rly name in <::onnection with the registration of a product lJ11der this Act is not to be construed as giving the ::-"!gistrant a right to exclusive use of the name or to its USe if it has beef! covered by others. This product is conditionally registered in accordance with FIFRA section 3(c)(7)(A) provided that you:

1. Submit the results of the storage stability and corrosion characteristics study when available.
2. Submit/cite all data required for registration/reregistration of your product when the Agency reqUires all registrants of similar products to submit such data.
3. Add the phrase "EPA Registration No. 524-538" release the product for shipment. before you
4. Submit three (3) copies of your final printed labeling before you release the product for shipment. If these conditions are not complied with, the registration will be subject to cancellation in accordance with FIFRA sec. 6(e). Your release for shipment of this product constitutes acceptance of these conditions. A stamped copy of the' label is encloed for your records. Signature:of Appr9-y..i.ftg-offical: ,/ " \ ~- \ JcnrvC Date:

MASTER LABEL FOR EPA REG. NO. 524·LGI Registered Brand Names: MON 78271 Herbicide Table of Contents for Master Label I. Main Label for Food Crop Uses Page 2 II. Supplemental Labeling for Food Crop Uses Page 70 III. Main Label for Industrial, Turf, & Ornamental Uses Page 83 IV. Supplemental Labeling for Industrial, Turf, & Ornamental Page Uses 113 See each label part for more detailed table of contents Master Label MON 7827) Page 1 of 118 Version: Apr·2002 UNMARKED

II. MAIN LABEL FOR FOOD CROP USES [INSERT BRAND NAME] Herbicide Complete Directions for Use EPA Reg. No. 524-LGI A VOID CONTACT OF HERBICIDE WITH FOLIAGE, GREEN STEMS, EXPOSED NON-WOODY ROOTS OR FRUIT OF CROPS (EXCEPT AS SPECIFIED FOR INDIVIDUAL ROUNDUP READY® CROPS), DESIRABLE PLANTS AND TREES, BECAUSE SEVERE INJURY OR DESTRUCTION MAY RESULT. Herbicide for Roundup Ready® Crops. Selective broad-spectrum weed control in Roundup Ready crops. Non-selective, broad-spectrum weed control for many cropping systems, farmsteads and Conservation Reserve Program acres. Transorb™ A member of the Roundup Family of Herbicides by Monsanto "The President's Green Chemistry Award was presented in 1996 to Monsanto for its innovative "zero-waste" process in the manufacture of Roundup Herbicide." Not all products recommended on this label are registered for use in California. Check the registration status of each product in California before using. Container Label Statement (5 gallons Or smaller) This container is not to be sold to homeowners for residential use. Read the entire label before using this product. Use only according to label instructions. It is a violation of Federal law to use this product in any manner inconsistent with its labeling. This product can only be used in accordance with the Directions for Use on this label or in separately published Monsanto Supplemental Labeling. Read the "LIMIT OF WARRANTY AND LIABILITY" statement at the end of the label before buying or using. If terms are not acceptable, return at once unopened. THIS IS AN END-USE PRODUCT. MONSANTO DOES NOT INTEND AND HAS NOT REGISTERED IT FOR REFORMULATION. SEE INDIVIDUAL CONTAINER LABEL FOR REPACKAGING LIMITATIONS. Master Label MON 78271 Page 2 ofllS Version: Apr·2002 UNMARKED

e'-:;~;. I. MAIN LABEL FOR FOOD CROP USES Refillable Container Label Statement: THIS IS AN END-USE PRODUCT. MONSANTO DOES NOT INTEND AND HAS NOT REGISTERED IT FOR REFORMULATION. IT IS INTENDED THAT REPACKAGING BE ONLY IN ACCORDANCE WITH A MONSANTO REPACKAGING OR TOLL REPACKAGING AGREEMENT. Non-refillable Container Label Statement: THIS IS AN END-USE PRODUCT. MONSANTO DOES NOT INTEND AND HAS NOT REGISTERED IT FOR REFORMULATION OR REPACKAGING. CONTENTS I 1.0 INGREDIENTS 2 2.0 IMPORTANT PHONE NUMBERS 3 3.0 PRECAUTIONARY STATEMENTS 3.1 Hazards to Humans and Domestic Animals 3.2 Environmental Hazards 3.3 Physical or Chemical Hazards 4 4.0 STORAGE AND DISPOSAL 5 5.0 GENERAL INFORM A TION (How This Product Works) 6 6.0 MIXING 6.1 Mixing with Water 6.2 Tank Mixing Procedure 6.3 Mixing for Hand-Held Sprayers 6.4 Ammonium Sulfate 6.5 Colorants or Dyes 6.6 Drift Control Additives 7 7.0 APPLlCA TION EQUIPMENT AND TECHNIQUES 7.1 Aerial Equipment 7.2 Ground Broadcast Equipment 7.3 Hand- Held or High-Volume Equipment 7.4 Selective Equipment 7.5 Injection Systems 7.6 CDA Equipment 8 8.0 ANNUAL AND PERENNIAL CROPS (Alphabetical) 8.1 Cereal and Grain Crops 8.2 Com 8.3 Cotton 8.4 Fallow Systems 8.5 Grain Sorghum (Milo) 8.6 Herbs and Spices 8.7 Oil Seed Crops 8.8 Soybeans 8.9 Sugarcane Master Label MON 78271 Page 3 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES 8.10 Vegetable Crops 8. I I Miseelaneous Crops 9 9.0 TREE, VINE, AND SHRUB CROPS (Alphabetical) 10 11 12 13 14 15 16 9.1 Berry Crops 9.2 Citrus 9.3 Miscellaneous Tree Food Crops 9.4 Non-Food Tree Crops 9.5 Pome Fruit 9.6 Stone Fruit 9.7 Tree Nuts 9.8 Tropical and Subtropical Trees and Fruits 9.9 Vine Crops 10.0 PASTURE GRASSES, FORAGE LEGUMES, AND RANGELANDS 10.1 Alfalfa, Clover, and Other Forage Legumes 10.2 Conservation Reserve program (CRP) 10.3 Grass Seed Production 10.4 Pastures 10.5 Rangelands 10.6 Turf Grass Sod Production 11.0 ROUNDUP READY CROPS I 1.1 Canola with the Roundup Ready Gene 11.2 Corn with the Roundup Ready Gene 11.3 Colton with the Roundup Ready Gene 11.4 Soybeans with the Roundup Ready Gene 11.5 Sugar beets with the Roundup Ready Gene 12.0 NON-CROP USES AROUND THE FARMSTEAD 12.1 General Weed Control and Trim-And-Edge 12.2 Greenhouse/Shadehouse 12.3 Chemical Mowing 12.4 Cut Stumps 12.5 Habitat Management 13.0 ANNUAL WEEDS RATE TABLE (Alphabetically by Species) 13.1 Annual Weeds -- Rates for 10 to 40 GPA 13.2 Annual Weeds -- Tank Mixtures with 2,4-0, Dieamba, or Tardon 22K 13.3 Annual Weeds - Hand-Held or High-Volume Equipment 13.4 Annual Weeds - Tank Mixtures with Atrazine for Fallow and Reduced Tillage Systems 14.0 PERENNIAL WEEDS RATE TABLE (Alphabetically by Species) 15.0 WOODY BRUSH AND TREES RATE TABLE (Alphabetically by Species) 16.0 LIMIT OF WARRANTY AND LIABILITY Master Label MON 7827) Page 4 of 118 Version: Apr·2002 UNMARKED ~/IIt;

I. MAIN LABEL FOR FOOD CROP USES 1.0 INGREDIENTS ACTIVE INGREDIENT: 'Glyphosate, N-(phosphonomethyl)glycine, in the form of its potassium salt ................................................ 44.6% OTHER INGREDIENTS: ................................... ,............................................................................... .......... 55.4% 100.0% 'Contains 590 grams per litre or 4.9 pounds per U.S. gallon of the active ingredient glyphosate. in the form of its potassium salt. Equivalent to 480 grams per litre or 4.0 pounds per U.S. gallon of the acid. glyphosate. This product is protected by U.S. Patent Nos. 5.688,085; 6,365,551 ; 5.683.958; 5.703.015; 6.063.733; 6,121,199; and 6.121.200. No license granted under any non-U.S. patent(s). 2.0 IMPORTANT PHONE NUMBERS I. FOR PRODUCT INFORMATION OR ASSISTANCE IN USING THIS PRODUCT. CALL TOLL-FREE, 1-800-332-3111 2. IN CASE OF AN EMERGENCY INVOLVING THIS HERBICIDE PRODUCT, OR FOR MEDICAL ASSISTANCE, CALL COLLECT, DAY OR NIGHT. (314)-694-4000 3.0 PRECAUTIONARY STATEMENTS A EPTED MAY 7 7f1J'L 3.1 Hazards 10 Humans and Domestic Animals Keep out of reach of children. WARNING! AVISO! CAUSES SUBSTANTIAL BUT TEMPORARY EYE INJURY. HARMFUL IF INHALED. Avoid contact with eyes. Avoid breathing vapor or spray mist. Do not get in eyes or on clothing. Avoid contact with skin or clothing. FIRST AID: Call a poison control center or doctor for treatment advice. IF IN EYES • Hold'eye open and rinse slowly and gently with water for 15 - 20 minutes. • Remove contact lenses if present after the first 5 minutes then continue rinsing eye. IFON SKIN OR CLOTHING • Take off contaminated clothing. • Rinse skin immediately with plenty of water for 15 - 20 minutes. Master Label MON 78271 Page 5 of 118 Version: Apr-2002 UNMARKED

-.---- L MAIN LABEL FOR FOOD CROP USES IF INHALED • Move person to fresh air. • If person is not breathing. call 911 or an ambulance. then give artificial respiration. preferably mouth-to-mouth. if possible. HOT LINE NUMBER Have the product container or label with you when calling a poison control center or doctor. Or going for treatment. This product is identified as [[INSERT BRAND NAMEJ. EPA Registration No. 524-LGI. You may also contact (314) 694-4000. collect day or night. for emergency medical treatment information. DOMESTIC ANIMALS: This product is considered to be relatively nontoxic to dogs and other domestic animals; however. ingestion of this product or large amounts of freshly sprayed vegetation may result in temporary gastrointestinal irritation (vomiting. diarrhea, coHc. etc.), If such symptoms are observed. provide the animal with plenty of fluids to prevent dehydration. Call a veterinarian if symptoms persist for more than 24 hours. Personal Protective Equipment (PPE) A pplicators and other handlers must wear: long-sleeved shirt and long pants. shoes. socks. protective eyewear. chemical resistant gloves greater than 14 mils in thickness composed of materials such as butyl rubber. natural rubber, neoprene rubber. or nitrile rubber. Follow manufacturer's instructions for cleaning/maintaining PPE (Personal Protective Equipment). If no such instructions for wash abies. use detergent and hot water. Keep and wash PPE separately from other laundry. Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product's concentrate. Do not reuse them. When handlers use closed systems. enclosed cabs, or aircraft in a manner that meets the requirements listed in Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d) (4-6)]. the handler PPE requirements may be reduced or modified as specified in the WPS. User Safety Recommendations: Users should: • Wash hands before eating. drinking. chewing gum. using tobacco. or using the toilet. Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. 3.2 Environmental Hazards Do not apply directly to water, to areas where surface water is present or to intertidal areas below the mean high water mark. Do not contaminate water when disposing of equipment washwaters. Masler Label MON 78271 Page 6 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES 3.3 Physical or Chemical Hazards Spray solutions of this product should be mixed. stored and applied using only stainless steel. aluminum. fiberglass. plastic or plastic-lined steel containers. 611ft; DO NOT MIX. STORE OR APPLY THIS PRODUCT OR SPRAY SOLUTIONS OF THIS PRODUCT IN GALVANIZED STEEL OR UNLINED STEEL (EXCEPT STAINLESS STEEL) CONTAINERS OR SPRAY TANKS. This product or spray solutions of this product react with such containers and tanks to produce hydrogen gas which may form a highly combustible gas mixture. This gas mixture could flash or explode. causing serious personal injury. if ignited by open flame. spark. welder's torch. lighted cigarelle or other ignition source. DIRECTIONS FOR USE It is a violation of Federal law to use this product in any manner inconsistent with its labeling. Do not apply this product in a way that will contact workers or other persons. either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe. consult the agency responsible for pesticide regulations. Agricultural Use Requirements Use this product only in accordance with its labeling and with the Worker Protection Standard. 40 CFR pan 170. This Standard contains requirements for the protection of agricultural workers on farms. forests. nurseries. and greenhouses. and handlers of agricultural pesticides. It contains requirements for training. decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours. PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated. such as plants. soil, or water. is: coveralls, shoes plus socks. protective eyewear and chemical resistant gloves (epa chemical Resistance Category A) 8 mils in thickness or greater composed of materials such as butyl rubber. natural rubber. neoprene rubber. or nitrile rubber. Non-Agricultural Use Requirements The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce agricultural plants on farms. forests. nurseries or greenhouses. Keep people and pets off treated areas until spray solution has dried to prevent transfer of this product onto desirable vegetation. 4.0 STORAGE AND DISPOSAL Do not contaminate water. foodstuffs. feed or seed by storage or disposal. Keep container closed to prevent spills and contamination. Master Label MON 78271 Page 7 of 118 Version: Apr·2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES Wastes resulting from the use of this product that cannot be used or chemically reprocessed should be disposed of in a landfill approved for pesticide disposal or in accordance with applicable Federal, state, or local procedures. Emptied container retains vapor and product residue. Observe all labeled safeguards until container is cleaned, reconditioned, or destroyed. See container label for STORAGE AND DISPOSAL instructions. Container Label Statements: (FOR REFILLABLE PORT ABLE CONTAINERS) Do not reuse this container except for refill in accordance with a valid Monsanto Repackaging or Toll Repackaging Agreement. If not refilled or returned to the authorized repackaging facility, triple rinse container, then puncture and dispose of in a sanitary landfill, or by incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of smoke. (FOR BULK CONTAINERS) Triple rinse emptied bulk container. Then offer for recycling or reconditioning. or dispose of in a manner approved by state and local authorities. (FOR PLASTIC I-WAY CONTAINERS & BOTTLES) Do not reuse container. Triple rinse container, then puncture and dispose of in a sanitary landfill. or by incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of smoke. (FOR DRUMS) Do not reuse container. Return container per the Monsanto container return program. If not returned. triple rinse container, then puncture and dispose of in a sanitary landfill. or by incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of smoke. 5.0 GENERAL INFORMA nON (How This Product Works) Product Description: This product is a postemergent, systemic herbicide with no soil residual activity. It is generally non-selective and gives broad-spectrum control of many annual weeds, perennial weeds. woody brush and trees. It is formulated as a water-soluble liquid. It may be applied through most standard industrial or field­ type sprayers after dilution and thorough mixing with water or other carriers according to label instructions. Do not add surfactants, additives containing surfactants, buffering agents or pH adjusting agents to the spray solution when [INSERT BRAND NAME) is the only pesticide used unless otherwise directed. Ammonium sulfate. drift control additives, or dyes and colorants may be used. See the "MIXING" section of this label for instructions. Time to Symptoms: This product moves through the plant from the point of foliage contact to and into the root system. Visible effects on mos.t annual weeds occur within 2 to 4 days, but on most perennial weeds may not occur for 7 days or more. Extremely cool or cloudy weather following treatment may slow activity of this product and delay development of visual symptoms. Visible effects are a gradual wilting and yellowing of the plant which advances to complete browning of above-ground growth and deterioration ofimderground plant parts. Stage of We.ds: Annual weeds are easiest to control when they are small. Best control of most perennial weeds is obtained when treatment is made at late growth stages approaching maiurity. Refer to the "ANNUAL Master Label MON 78271 Page 8 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES WEEDS. PERENNIAL WEEDS AND WOODY BRUSH RATE TABLES" for recommendations for specific weeds. Always use the higher rate of this product per acre within the recommended range when weed growth is heavy or dense or weeds are growing in an undisturbed (noncultivated) area. Do not treat weeds under poor growing conditions such as drought stress, disease or insect damage. as reduced weed control may result. Reduced results may also occur when treating weeds heavily covered with dust. Cultural Considerations: Reduced control may result when applications are made to annual or perennial weeds that have been mowed. grazed. Or cut. and have not been allowed to regrow to the recommended stage for treatment. Rainfastness: Heavy rainfall soon after application may wash this product off of the foliage and a repeat application may be required for adequate control. Spray Coverage: For best results. spray coverage should be uniform and complete. Do not spray weed foliage to the point of runoff. Mode of Action: The active ingredient in this product inhibits an enzyme found only in plants and microorganisms that is essential to formation of specific amino acids. No Soil Activity: Weeds must be emerged at the time of application to be controlled by this product. Weeds germinating from seed after application wiJI not be controlled. Unemerged plants arising from unattached underground rhizomes or rootstocks of perennials will not be affected by the herbicide and will continue to grow. Biological Degradation: Degradation of this product is primarily a biological process carried out by soil microbes. Tank Mixing: This product does not provide residual weed control. For subsequent residual weed control. follow a label-approved herbicide program. Read and carefully observe the cautionary statements and all other information appearing on the labels of all herbicides used. Use according to the most restrictive label Bi.aruI tdi llBeh;JlII'IId1mPim!liblmfturH.loss or damage in connection with the use or handling of mixtures of this product with herbicides or other materials that are not expressly recommended in this labeling. Mixing this product with herbicides or other materials not recommended on this label may resuh in reduced performance. Annual Maximum Use Rate: Except as otherwise specified in a crop section of this label. the combined total of al1 treatments must not exceed 6 quarts of this product per acre per year. For applications in non-crop sites or in tree. vine. or shrub crops. the combined total of al1 treatments must not exceed 8 quarts of this product per aCre per year. The maximum use rates stated throughout this product's labeling apply to this product combined with the use of all other herbicides containing glyphosate or sulfosate as the active ingredient. whether applied as mixtures or separately. Calculate the application rates and ensure that the total use of this and other glyphosate or sulfosate containing products does not exceed staled maximum use rate. NOTE: Use of this product in any manner not consistent with this label may result in injury to persons. animals or crops, or other unintended consequences. 6.0 MIXING Clean sprayer parts immediately after using this product by thoroughly flushing with water. Masler Label MON 78271 Page 9 of 118 Version: Apr·2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES NOTE: REDUCED RESULTS MAY OCCUR IF WATER CONTAINING SOIL IS USED. SUCH AS VISIBLY MUDDY WATER OR WATER FROM PONDS AND DITCHES THAT IS NOT CLEAR. 6.1 Mixing with Water This product mixes readily with water. Mix spray solutions of this product as follows: Fill the mixing or spray tank with the required amount of water. Add the recommended amount of this product near the end of the filling process and mix well. Use caution to avoid siphoning back into the carrier SOUTce. Use approved anti~ back-siphoning devices where required by state or local regulations. During mixing and application. foaming of the spray solution may occur. To prevent or minimize foam, avoid the use of mechanical agitators, terminate by-pass and return lines at the bottom of the tank and. if needed. use an approved anti-foam or defoaming agent. 6.2 Tank Mixing Procedure Mix labeled tank mixtures of this product with water as fol1aws: I. Place a 20- to 35-mesh screen or wetting basket over filling port. 2. Through the screen. fill the spray tank one-half full with water and start agitation. 3. If ammonium sulfate is used add it slowly through the screen into the tank. Continue agitation. Ensure that dry ammonium sulfate is completely dissolved in the spray tank before adding other products. 4. If a wettable powder is used. make a slurry with the water carrier. and add it SLOWLY through the screen into the tank. Continue agitation. 5. If a flowable formulation is used. premix one part flowable with one part water. Add diluted mixture SLOWLY through the screen into the tank. Continue agitation. 6. If an emulsifiable concentrate formulation is used, premix one part emulsifiable concentrate with two parts water. Add diluted mixture slowly through the screen into the tank. Continue agitation. 7. Continue filling the spray tank with water and add the required amount of this product near the end of the filling process. 8. Add individual formulations to the spray tank as follows: wettable powder. flowable. emulsifiable concentrate. drift control additive and water soluble liquid. Maintain good agitation at all times until the contents of the tank are sprayed. If the spray mixture is allowed to settle. thorough agitation is required to resuspend the mixture before spraying is resumed. Keep by-pass line on or near the bottom of the tank to minimize foaming. Screen size in nozzle or line strainers should be no finer than 50 mesh. Always predetermine the compatibility of labeled tank mixtures of this product with water carrier by mixing small proportional quantities in advance. Refer to the '-r ANK MIXING" section of "GENERAL INFORMATION" for additional precautions. 6.3 Mixing for Hand-Held Sprayers Master Label MON 78271 Page 10 of 118 Version: Apr.2002 UNMARKED 11/11'1

I. MAIN LABEL FOR FOOD CROP USES Prepare the desired volume of spray solution by mixing the amount of this product in water as shown in the following table: ~I!ra! Solution Amount of [INSERT BRAND NAME] Desired Volume 0.5% 0.8% 1% 1.7% 5% 8% I gal 1120z loz 1-1/30z 20z 6-1120z JOoz 25 gal I pt 1.6 pt I qt 1-112 qt 5 qt 2 gal 100 gal 2 qt 3.2 qt I gal 1.7 gal 8 gal 8 gal 2 tablespoons = I fluid ounce For use in knapsack sprayers. it is suggested that the recommended amount of this product be mixed with water in a larger container. Fill sprayer with the mixed solution. 6.4 Ammonium Sulfate The addition of I to 2 percent dry ammonium sulfate by weight or 8.5 to 17 pounds per 100 gallons of water may increase the performance of this product. particularly under hard water conditions. drought conditions or when tank mixed with certain residual herbicides. on annual and perennial weeds. The equivalent rate of ammonium sulfate in a liquid formulation may also be used. Ensure that dry ammonium sulfate is completely dissolved in the spray tank before adding herbicides. Thoroughly rinse the spray system with clean water after use to reduce corrosion. NOTE: When using ammonium sulfate. apply this product at rates recommended in this label. Lower rates will result in reduced performance. 6.5 Colorants or Dyes Agriculturally approved colorants or marking dyes may be added to this product. Colorants or dyes used in spray solutions of this product may reduce performance. especially at lower rates or dilutions. Use colorants or dyes according to the manufacturer's recommendations. 6.6 Drift Control Additives Drift control additives may be used with all equipment types. except wiper applicators. sponge bars and Controlled Droplet Applicator (CDA) equipment. When a drift control additive is used. read and carefully observe the cautionary statements and all other information appearing on the additive label. The use of drift control additives can affect spray coverage which may result in reduced performance. 7.0 APPLICATION EQUIPMENT AND TECHNIQUES Do not apply this product through any type of irrigation system. This product may be applied with the following application equipment: Aerial-- Fixed Wing and Helicopter Master Label MON 78271 Page 11 of 118 Vcr,;ion: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES Ground Broadcast Spray--Boom or boom less systems. pull-type sprayer. floaters. pick-up sprayers. spray coupes and other ground broadcast equipment. Hand-Held or High. Volume Spray Equipment--Knapsack and backpack sprayers. pump-up pressure sprayers. handguns. hand wands. mistblowers'. lances and other hand-held and motorized spray equipment used to direct the spray onto weed foliage. 'This product is not registered in California or Arizona for use in mistblowers. Selective Equipment--Recirculating sprayers. shielded and hooded sprayers. wiper applicators and sponge bars. Injection Systems--Aerial or ground injection sprayers. Controlled Droplet Applicator (CDA)--Hand-held or boom-mounted applicators which produce a spray consisting of a narrow range of droplet sizes. APPLY THESE SPRAY SOLUTIONS IN PROPERLY MAINTAINED AND CALIBRATED EQUIPMENT CAPABLE OF DELIVERING DESIRED VOLUMES. 7.1 Aerial Equipment DO NOT APPLY THIS PRODUCT USING AERIAL SPRAY EQUIPMENT EXCEPT UNDER CONDITIONS AS SPECIFIED WITHIN THIS LABEL. Use the recommended rates of this herbicide in 3 to 15 gallons of water per acre unless otherwise specified on this label. Unless otherwise specified. do not exceed 24 fluid ounces per acre. Refer to the individual use area sections of this label for recommended volumes, application rates. and further instructions. FOR AERIAL APPLICATION IN CALIFORNIA OR ARKANSAS. REFER TO THE FEDERAL SUPPLEMENT AL LABEL FOR AERIAL APPLICATIONS IN THAT STATE FOR SPECIFlC INSTRUCTIONS. RESTRICTIONS AND REQUIREMENTS. This product plus dicamba tank mixtures may not be applied by air in California. Ensure uniform application. To avoid streaked, uneven or overlapped application. use appropriate marking devices. AERIAL SPRAY DRIFT MANAGEMENT The following drift management requirements must be followed to avoid off-target drift movement from aerial applications to agricultural field crops. I. The distance of the outermost nozzles on the boom must not exceed 3/4 the length of the wingspan or rotor. 2. Nozzles must always point backward. parallel with the air stream and never be pointed downwards more than 45 degrees. Where states have more stringent regulations, they should be observed. Importance of droplet size The most effective way to reduce drift potential is to apply large droplets. The best drift management strategy is to apply the largest droplets that provide sufficient coverage and control. Applying larger droplets reduces drift potential. but will not prevent drift if applications are made improperly. or under unfavorable Master Label MON 78271 Page 12 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES environmental conditions (see the Wind, Temperature and Humidity. and Temperature Inversions sections of this label). Controlling droplet size • Volume: Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with the higher rated flows produce larger droplets. • Pressure: Use the lower spray pressures recommended for the nozzle. Higher pressure reduces droplet size and does not improve canopy penetration. When higher flow rates are needed. use higher flow rate nozzles instead of increasing pressure. • Number of nozzles: Use the minimum number of nozzles that provide uniform coverage. • Nozzle orientation: Orienting nozzles so that the spray is released backwards. parallel to the airstream. will produce larger droplets than other orientations. Significant deflection from the horizontal will reduce droplet size and increase drift potential. • Nozzle type: Use a nozzle type that is designed for the intended application. With most nozzle types. narrower spray angles produce larger droplets. Consider using low-drift nozzles. Solid stream nozzles oriented straight back produce larger droplets than other nozzle types. • Boom Length: For some use patterns. reducing the effective boom length to less than 3/4 of the wingspan Or rotor length may further reduce drift without reducing swath width. • Application Height: Applications should not be made at a height greater than 10 feet above the top of the largest plants unless a greater height is required fpr aircraft safety. Making applications at the lowest height that is safe reduces the exposure of the droplets to evaporation and wind. Swath Adjustment When applications are made with a crosswind. the swath will be displaced downward. Therefore. on the up and downwind edges of the field. the applicator must compensate for this displacement by adjusting the path of the aircraft upwind. Swath adjustment distance should increase. with increasing drift potential (higher wind. smaller droplets. etc.). Wind Drift potential is lowest between wind speeds of 2 to 10 mph. However. many factors. including droplet size and equipment type determine drift potential at any given speed. Application should be avoided below 2 mph due to variable wind direction and high inversion potential. NOTE: Local terrain can influence wind patterns. Every applicator should be familiar with local wind patterns and how they affect drift. Temperature and Humidily When making applications in low relative humidity. set up equipment to produce larger droplets to compensate for evaporation. Droplet evaporation is most severe when conditions are both hot and dry. Temperature inversions Applications should not occur during a temperature inversion because drift potential is high. Temperature inversions re~trict vertical air mixing, which causes small suspended droplets to remain in a concentrated cloud. This cloud can move in unpredictable directions due to the light variable winds common during inversions. Master Label MON 78271 Page 13 of 118 Version: Apr·2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES Temperature inversions are characterized by increasing temperatures with altitude and are common on nights with limited cloud cover and light to no wind. They begin to form as the sun sets and often continue into the morning. Their presence can be indicated by ground fog; however. jf fog is not present, inversions can also be identified by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion. while smoke that moves upward and rapidly dissipates indicates good venical air mixing. Sensitive areas The product should only be applied when the potential for drift to adjacent sensitive areas (e.g. residential areas. bodies of water, known habitat for threatened or endangered species, non-target crops) is minimal (e.g. when wind is blowing away from the sensitive areas). A void direct application to any body of water. Aircraft Maintenance Thoroughly wash aircraft, especially landing gear, after each day of spraying to remove residues of this product accumulated during spraying or from spills. PROLONGED EXPOSURE OF THIS PRODUCT TO UNCOATED STEEL SURFACES MAY RESULT IN CORROSION AND POSSIBLE FAILURE OF THE PART. LANDING GEAR IS MOST SUSCEPTIBLE. The maintenance of an organic coating (paint), which meets aerospace specification MIL-C-38413, may prevent corrosion. 7.2 Ground Broadcast Equipment Use the recommended rates of this product in 3 to 40 gallons of water per acre as a broadcast spray unless otherwise specified. As density of weeds increases, spray volume should be increased within the recommended range (Q ensure complete coverage. Carefully select proper nozzles to avoid spraying a fine mist. For best results with ground application equipment, use flat spray nozzles. Check for even distribution of spray droplets. 7.3 Hand-Held or High-Volume Equipment Apply to foliage of vegetation to be controlled. For applications made on a spray-to-wet basis, spray coverage' should be uniform and complete. Do not spray to the point of runoff. Use coarse sprays only. For recommended rates and timing, refer to the "ANNUAL WEEDS -- HAND-HELD OR HIGH-VOLUME EQUIPMENT" section of this product label. 7.4 Selective Equipment This product may be applied through recirculating spray systems, shielded applicators, hooded sprayers, wiper applicators or sponge bars, after dilution and thorough mixing with water, to listed weeds growing in any non­ crop site specified on this label. In cropping systems, hooded sprayers, shielded sprayers, and wipers may be used in row middles (in between rows of crop plants) where any' dripping or leaking will not contact crop foliage. Such equipment must be capable of preventing all crop contact with herbicide solutions and operated without leakage of spray mists or dripping onto crop. Wipers over-the-top of crops may be used only when specifically recommended in this product's labeling. A VOID CONT ACT OF HERBICIDE WITH DESIRABLE VEGETATION. Master Label MON 78271 Page 14 of 118 Version: Apr·2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES Contact of the herbicide solution with desirable vegetation may result in damage or destruction. Applicators used above desirable vegetation should be adjusted so that the lowest spray stream or wiper Contact point is at least 2 inches above the desirable vegetation. Droplets, mist, foam or splatter of the herbicide solution senling on desirable vegetation may result in discoloration. stunting or destruction. Applications made above the crops should be made when the weeds are a minimum of 6 inches above the desir­ able vegetation. Bener results may be obtained when more of the weed is exposed to the herbicide solution. Weeds not contacted by the herbicide solution will not be affected. This may occur in dense clumps, severe infestations or when the height of the weeds varies so that not all weeds are contacted. In these instances, repeat treatment may be necessary. Recirculating spray system A recirculating spray system directs the spray solution onto weeds growing above desirable vegetation. while spray solution not intercepted by weeds is collected and returned to the spray tank for reuse. Shielded and hooded applicators When applied under the conditions described in the following paragraphs for shielded and hooded applications, this product at recommended rates will control those weeds listed in the "ANNUAL WEEDS RATE TABLE" and "PERENNIAL WEEDS RATE T ABLE" sections of this label. A hooded sprayer is a type of shielded applicator where the spray panern is fully enclosed including top, sides, front and back, thereby shielding the crop from the spray solution. Keep shields on these sprayers adjusted to protect desirable vegetation. When applying to crops grown on raised beds, ensure that the hood is designed to completely enclose the spray solution. If necessary, extend the front and rear flaps of the hoods to reach the ground in deep furrows. EXTREME CARE MUST BE EXERCISED TO A VOID CONTACT OF HERBICIDE WITH DESIRABLE VEGETATION. This equipment must be set up and operated in a manner that avoids bouncing or raising the hoods off the ground in any way. If the hoods are raised, spray particles may escape and come into contact with the crop, causing damage or destruction of the crop. Avoid operation on rough or sloping ground where the spray hoods might be raised off the ground. Use hoods designed to minimize excessive dripping or run-off down the insides of the hoods. A single, low pressure/low drift flat-fan nozzle with an 80 to 95 degree spray angle positioned at the top center of the hood is recommended. Spray volume should be 20-30 gallons per acre. These procedures will reduce the potential for crop injury: • The spray hoods must be operated on the ground or skimming across the ground. • Leave at least an 8 inch untreated strip over the drill row. For example, if the crop row width is 38 inches, the maximum width of the spray hood should be 30 inches. • Maximum tractor speed: 5 mph to avoid bouncing of the spray hoods. • Maximum wind speed: 10 mph. • Use low·drift nozzles that provide uniform coverage within the treated area. Crop injury may occur when the foliage of treated weeds comes into direct contact with leaves of the crop. Do not apply this product when the leaves of the crop are growing in direct contact with weeds to be treated. Droplets, mist, foam or splatter of the herbicide solution may contact the crop and cause discoloration, stunting or destruction. Wiper applicators Master Label MON 7827 J Page 15 of 118 Version: Apr·2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES When applied under the conditions described in the following paragraphs. this product CONTROLS many weeds, inc1uding volunteer corn, Texas panicum. common rye, shattercane. sicklepod. spanishneedles and bristly starbur; and SUPPRESSES many weeds including Florida beggarweed. bermudagrass. hemp dogbane. dogfennel. guineagrass, johnsongrass. milkweed. silverleaf nightshade. redroot pigweed. giant ragweee. smutgrass. sunflower. Canada thistle. musk thistle. vaseygrass. velvetleaf. Wiper applicators are devices that physically wipe appropriate amounts of this product directly onto the weed. Equipment must be designed. maintained and operated to prevent the herbicide solution from contacting desir­ able vegetal ion. Operate this equipment al ground speeds no greater than 5 mph. Performance may be improved by reducing speed in areas of heavy weed infestations to ensure adequate wiper salUration. Better results may be obtained if two applications are made in opposite directions. Avoid leakage or dripping onto desirable vegetation. Adjust height of applicator to ensure adequate contact with weeds. Keep wiping surfaces clean. Be aware that. on sloping ground. the herbicide solution may migrate. causing dripping on the lower end and drying of the wicks on the upper end of a wiper applicator. Do not use wiper equipment when weeds are wet. Mix only the amount of solution to be used during a l·day period. as reduced activity may result from use of leftover solutions. Clean wiper parts immediately after using this product by thoroughly flushing with water. Do not add surfactant to the herbicide solution. For Rope or Sponge Wick Applicators--Mix I gallon of this product with 3 gallons of water to prepare a 25 percent solution. Apply this solution to weeds listed in this section. For Panel Applicators--Solutions ranging from 25 to 100 percent of this product in water may be used in panel wiper applicators. 7.5 Injection Systems This product may be used in aerial or ground injection spray syslems. It may be used as a liquid concentrate or diluted prior to injecting into the spray stream. Do not mix this product with the concentrate of other products when using injection systems. 7.6 CDA Equipment The rate of this product applied per acre by vehicle-mounted CDA equipment must not be less than the amount recommended in this label when applied by conventional broadcast equipment. For vehicle-mounted CDA equipment. apply 2 to 15 gallons of water per acre. For the control of annual weeds with hand-held CDA units. apply a 20 percent solution of this product at a flow rate of 2 fluid ounces per minute and a walking speed of 1.5 mph (1 quart per acre). For the control of perennial weeds. apply a 20 to 35 percent solution of this product at a flow rate of 2 fluid ounces per minute and a walking speed of 0.75 mph (2to 3.5 quarts per acre). Controlled droplet application equipment produces a spray pallern that is not easily visible. Extreme care must be exercised to avoid spray or drift contacting the foliage or any other green tissue of desirable vegetation. as damage or destruction may result. 8.0 ANNUAL AND PERENNIAL CROPS (Alphabetical) Master Label MON 7827) Page 16 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES NOTE: THIS SECTION GIVES GENERAL DIRECTIONS THAT APPLY TO ALL LISTED CROPS WITHIN SECTION 8 GROUPED ALPHABETICALLY BELOW. SEE THE INDIVIDUAL CROP CATEGORIES FOR SPECIFIC INSTRUCTIONS, PREHARVEST INTERVALS, AND ADDITIONAL PRECAUTIONS AND RESTRICTIONS. See the "ROUNDUP READY CROPS" section of this label or separately published Monsanto Supplemental Labeling for instructions for treating Roundup Ready crops. TYPES OF APPLICATIONS: Chemical fallow, Preplant fallow beds, Preplant, Preemergence, At-planting, Hooded sprayers in row-middles, Shielded sprayers in row-middles, Wiper applicators in row-middles, and Post-harvest treatments. GENERAL USE INSTRUCTIONS: It/II'I Apply this product during fallow intervals preceding planting, prior to planting or transplanting, at-planting, or preemergent to annual and perennial crops listed in this label, except where specifically limited. For any crop not listed in this label, applications must be made at least 30 days prior to planting. Unless otherwise specified, weed control applications may be made according to the rates listed in the "ANNUAL WEEDS, PERENNIAL WEEDS, AND WOODY BRUSH RATE TABLES" in this label. Repeat applications may be made up to a maximum of 6 quarts per acre per year. Post-directed hooded sprayers and wiper equipment capable of preventing all crop contact with herbicide solutions may be used in mulched or unmulched row middles after crop establishment. Where specifically noted below, wipers may also be used above certain crops to control tall weeds. Refer to the "SELECTIVE EQUIPMENT" section of this label for essential precautions when using hooded sprayers or wipers to avoid crop injury caused by leakage of spray mists or dripping onto crops. Crop injury is possible with these applications and shall be the sole responsibility of the applicator. The maximum use rates stated throughout this product's labeling apply to this product combined with the use of all other herbicides containing glyphosate or sulfosate as the active ingredient. whether applied as mixtures or separately. Calculate the application rates and ensure that the total use of this and other glyphosate or sulfosate containing products does not exceed stated maximum use rate. GENERAL PRECAUTIONS, RESTRICTIONS: Avoid contact of herbicide with foliage, green shoots or stems, bark, exposed roots (including those emerging from plastic mulch), or fruit of crops because severe injury or destruction may result. When making preemergence and at planting applications, applications must be made before crop emergence to avoid severe crop injury. Broadcast applications made at emergence will result in injury or death to emerged seedlings. Apply before seed germination in coarse sandy soils to further minimize the risk of injury. Unless otherwise specified in this product's labeling, treatments with selective equipment including wipers and hooded sprayers must be made at least 14 days prior to harvest. Post-harvest or fallow applications must be made at least 30 days prior to planting any non-labeled crop. See "APPLICATION EQUIPMENT AND TECHNIQUES" section of this label for additional information. In crops where spot treatments are allowed, do not treat more than I 0 percent of the total field to be harvested. The crop receiving spray in treated area will be killed. Take care to avoid drift or spray outside the target area for the same reason. For broadcast postemergent treatments, do not harvest or feed treated vegetation for 8 weeks following application. unless otherwise specified. 8.1 Cereal and Grain Crops LABELED CROPS: Barley. Buckwheat. Millet (pearl, proso), Oats. Rice, Rye, Quinaa, Teff. Teosinte, Triticale, Wheat (all types), Wild rice. MaSler label MON 78271 Page 17 of 118 Version: Apr·2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES PRECAUTIONS. RESTRICTIONS: Do not treat rice fields or levees when field contains water. TYPES OF APPLICATIONS: Those listed in Section 8.0 plus the following: red rice control prior to planting rice. spot treatment (except rice). wiper applicators over-the-top (feed barley and wheat only). preharvest (feed barley and wheat only). Preplant, Preemergence and At-planting USE INSTRUCTIONS: This product may be applied before. during or after planting of cereal crops. Applications must be made prior to emergence of the crop. Red rice control prior to planting rice USE INSTRUCTIONS: Apply 36 fluid ounces of this product in 5 to 10 gallons of water per acre. Aush fields prior to application to obtain uniform germination and stand of red rice. Make application when the majority of the red rice plants are in the 2-leaf stage and no more than 4 inches tall. Red rice plants with less than 2 true leaves may be only partially controlled. PRECAUTIONS. RESTRICTIONS: Avoid spraying during low humidity conditions. as reduced control may result. Do not treat rice fields or levees when the fields contain floodwater. Do not re-flood treated fields for 8 days following application. Spot treatment (except rice) USE INSTRUCTIONS: This product may be applied as a spot treatment in cereal crops. Apply this product before heading in small grains. PRECAUTIONS. RESTRICTIONS: Do not treat more than 10 percent of the total field area to be harvested. The crop receiving spray in the treated area will be kiHed. Take care to avoid drift or spray outside target area for the same reason. Wiper Applications Over the Top (Feed Barley and wheat only) USE INSTRUCTIONS: Wiper applications may be used in wheat and feed barley. To control common rye or cereal rye. applr after the weeds have headed and achieved maximum growth. and when the rye is at least 6 inches above the wheat crop. PRECAUTIONS. RESTRICTIONS: Allow at least 35 days between application and harvest. Do not use roller applicators. Preharvest (Feed Barley and Wheat Only) USE INSTRUCTIONS: This product provides weed control when applied prior to harvest of wheat or feed barley. For wheat. apply after the hard-dough stage of grain (30 percent or less grain moisture). For feed barley. apply after the hard-dough stage and when the grain contains 20 percent moisture or less .. Stubble may be grazed immediately after harvest. This product may be applied using either aerial Or ground spray equipment. For ground applications. apply this product in 10 to 20 gallons of water per acre. For aerial applications. apply this product in 3 to 10 gallons of water per aCre. PRECAUTIONS. RESTRICTIONS: Do not apply more than 24 fluid ounces of this product per acre. Allow 7 days between application and harvest or grazing. Preharvest application is not recommended for wheat or barley grown for seed, as a reduction in germination or vigor may occur. Master Label MON 7827) Page 18 of 118 Version: Apr·2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES Post-harvest USE INSTRUCTIONS: This product may be applied after harvest of cereal crops. Higher rates may be required for control of large weeds which were growing in the crop at the time of harvest. Tank mixtures with 2,4-0 or dicamba may be used. PRECAUTIONS. RESTRICTIONS: For any crop not listed on this label. applications must be made at least 30 days prior to planting the next crop. Allow a minimum of 7 days between treatment and harvest or feeding of treated vegetation. 8.2 Corn TYPES OF CORN: Field corn. Seed corn. Silage corn. Sweet corn and Popcorn. TYPES OF APPLICATIONS: Those listed in Section 8.0 plus the following: Spot Treatment. Preharvest. For Roundup Ready corn. see the "ROUNDUP READY CROPS" section of this label. Preplant, Preemergence and At-planting USE INSTRUCTIONS: This product may be applied alone or in a tank-mixture before. during or after planting corn. Applications must be made prior to emergence of the crop. TANK MIXTURES: Apply these tank mixtures in JO to 20 gallons of water or JO to 60 gallons of nitrogen solution per acre. 2,4-0 DISTINCT'M LARIAT® ATRAZINE DUAL MAGNUM'M LASSO®/ ALACHLOR AXIOM'M DUAL II MAGNUMTM LINEX'MILOROX'M BALANCETM EPICTM MARKSMAN'M BANVELTM/CLARITYTM FRONTIERTM/OUTLOOKTM MICRO- TECH® BICEP MAGNUMTM FULTiMETM PROWL'M BICEP II MAGNUM'M GUARDSMAN'MILEADOFPM PYTHON'M BULLET® HARNESS® SIMAZINE DEGREE® HARNESSXTRA TOPNOTCWM DEGREE XTRA® HARNESS XTRA 5.6L For difficult-to-control annual weeds such as fall panicum. barnyardgrass. crabgrass. shattercane and broadleaf signalgrass up to 2 inches tall. and Pennsylvania smartweed up to 6 inches tall. apply this product at 24 fluid ounces per acre in these tank mixtures. For other labeled annual weeds. apply 18 to 24 fluid ounces of this product per acre when weeds are less than 6 inches tall. and 24 to 36 fluid ounces when weeds are over 6 inches tall. When using nitrogen solutions as the carrier, use rate may need to be increased for acceptable weed control. PRECAUTIONS. RESTRICTIONS: Applications of 2,4-0 or dicamba must be made at least 7 days prior to planting corn. For Southern states. do not apply in nitrogen solutions to tough-to-control grasses such as barnyard grass. fan panic urn. broad leaf signalgrass. annual rye grass and any perennial weeds. The area covered by this recommendation includes from Route 50 South in Illinois and Indiana and the following states: !-Iabama. Arkansas. Delaware. Florida. Georgia. Kentucky. Louisiana. Maryland. Mississippi. New Jersey. North Carolina. Oklahoma, South Carolina, Tennessee, Texas, Virginia and West Virginia. Master Label MON 7827) Page 19 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES The tank-mix recommendations in this section are not registered in California. Hooded sprayers USE INSTRUCTIONS: This product may be used through hooded sprayers for weed control between the rows of corn. Only hooded sprayers that completely enclose the spray pattern may be used. See additional instruction for the use of hooded sprayers in the "APPLICATION EQUIPMENT AND TECHNIQUES" section of this label. PRECAUTIONS. RESTRICTIONS: Corn must be at least 12 inches tall. measured without extending leaves. Contact of this product in any manner to any vegetation to which treatment is not intended may cause damage. Such damage shall be the sole responsibility of the applicator. Do not apply more than 24 fluid ounces of this product per acre for each application and no more than 2.3 quarts per acre per year for hooded sprayer applications. Spot treatment USE INSTRUCTIONS: For spot treatments. apply this product prior to silking of corn. PRECAUTIONS. RESTRICTIONS: Do not treat more than IO percent of the total field area to be harvested. The crop receiving spray in the treated area will be killed. Take care to avoid drift or spray outside target area for the same reason. Preharvest USE INSTRUCTIONS: Make applications at 35 percent grain moisture or less. Ensure that maximum kernel fill is complete and the corn is physiologically mature (black layer formed). For ground applications. apply up to 2.3 quarts of this product per acre. For aerial applications. apply up to 48 fluid ounces of this product per acre. PRECAUTIONS. RESTRICTIONS: Allow a minimum of 7 days between application and harvest Preharvest application is not recommended for corn grown for seed, as a reduction in germination or vigor may occur. Post-harvest USE INSTRUCTIONS: This product may be applied after harvest of corn. Higher rates may be required for· control of large weeds which were growing in the crop at the time of harvest. Tank mixtures with 2,4-D or dicamba may be used. PRECAUTIONS. RESTRICTIONS: Allow a minimum of 7 days between treatment and harvest or feeding of treated vegetation. 8.3 Cotton TYPES OF APPLICATIONS: Those listed in Section 8.0 plus the following: Selective equipment. Spot Treatment. Preharvest. For Roundup Ready cotton. see the "ROUNDUP READY CROPS" section of this label. Preplant, Preemergence, and At-planting USE INSTRUCTIONS: This product may be applied before, during or after planting cotton. Applications must be made prior to emergence of the crop. Master Label MON 78271 Page 20 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES Hooded sprayer, Selective equipment USE INSTRUCTIONS: This product may be applied through hooded sprayers, recirculating sprayers, shielded applicators or wiper applicators in cotton. Allow at least 7 days between application and harvest. PRECAUTIONS, RESTRICTIONS: See the '"SELECTIVE EQUIPMENT'" part of the '"APPLICATION EQUIPMENT AND TECHNIQUES'".section of this label for information on proper use and calibration of this equipment. Spot treatment USE INSTRUCTIONS: For spot treatments, apply this product prior to boll opening of cotton. PRECAUTIONS, RESTRICTIONS: Do not treat more than 10 percent of the total field area to be harvested. The crop receiving spray in treated area will be killed. Take care to avoid drift or spray outside target area for the same reason. Preharvest USE INSTRUCTIONS: This product provides weed control and cotton regrowth inhibition when applied prior to harvest of cotton. For weed control, apply at rates given in the "ANNUAL, PERENNIAL and WOODY BRUSH WEED CONTROL TABLE" sections of this label. For cotton regrowth inhibition, apply 12 to 48 fluid ounces of this product per acre. Up to 48 fluid ounces of this product may be applied using either aerial or ground spray equipment. Apply after sufficient bolls have developed to produce the desired yield of cotton. Applications made prior to this time could affect maximum yield potential. TANK MIXTURES: This product may be tank mixed with DEF'" 6, Folex'", Ginstar, or Prep'" to provide additional enhancement of cotton leaf drop. PRECAUTIONS, RESTRICTIONS: Allow a minimum of 7 days between application and harvest of cotton. Preharvest application is not recorrunended for cotton grown for seed, as a reduction in germination or vigor may occur. 8.4 Fallow Systems LABELED CROPS: This product may be applied during the fallow period prior to planting or emergence of any crop on this label. TYPES OF APPLICATIONS: Chemical fallow, Preplant fallow beds, Aid-to-tillage. Chemical fallow USE INSTRUCTIONS: This product may be applied during the fallow period prior to planting or emergence of any crop listed on this label". This product may be used as a substitute for tillage to control annual weeds in fallow fields. Also, broadcast or spot treatments will control or suppress many perennial weeds in fallow fields. Ground or aerial application equipment may be used. Tank mixtures with 2,4-0 and dicamba may be used. Applications up to 48 fluid ounces per acre may be made by aerial application in fallow sites where there is sufficient buffer to prevent injury due to drift onto adjacent crops. PRECAUTIONS, RESTRICTIONS: For any crop not listed on this label, applications must be made at least 30 days prior to planting. Do not apply dieamba tank mixtures by air in California. Masler Label MON 78271 Page 21 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES Refer to the specific product labels for crop rotation restrictions and cautionary statements of all products used in tank mixtures. Some crop injury may occur if dicamba is applied within 45 days of planting. Preplant fallow beds USE INSTRUCTIONS: This product may be applied to fallow beds prior to planting or emergence of any crop listed on this label. For any crop not listed on this label. app'lications must be made at least 30 days prior to planting. This product will control weeds listed in the "ANNUAL, PERENNIAL and WOODY BRUSH WEED CONTROL TABLE" sections of this label. TANK MIXTURES: In addition. 9 fluid ounces of this product plus 2 to 3 fluid ounces of Goal™ 2XL per acre will control the following weeds with the maximum height or length indicated: 3 inches -- common cheeseweed. chickweed. groundsel; 6 inches -- London rocket, shepherd's-purse. 12 fluid ounces of this product plus 2 to 3 fluid ounces ofGoal2XL per acre will control the following weeds with the maximum height or length indicated: 6 inches -- common cheeseweed, groundsel, marestail (Conyza calladellsisl. 12 inches -- chickweed. London rocket. shepherd·s-purse. Aid-lo-liIlage USE INSTRUCTIONS: This product may be used in conjunction with tillage practices in fallow systems or preplant to labeled crops to control downy brome. cheat, volunteer wheat. tansy mustard and foxtail. Apply 9 fluid ounces of this product in 3 to 10 gallons of water per acre. Make applications before weeds are 6 inches in height. Application must be followed by conventional tillage practices no later than 15 days after treatment and before regrowth occurs. Allow at least I day after application before tillage. PRECAUTIONS, RESTRICTIONS: Tank mixtures with residual herbicides may result in reduced performance. 8.5 Grain Sorghum (Milo) TYPES OF APPLICATIONS: Those listed in Section 8.0 plus the following: Spot treatment. Over-the-top wiper applications Pre harvest. Preplan!, Preemergence, AI-planting USE INSTRUCTIONS: This product may be applied alone or in tank-mixture before. during or after planting grain sorghum. Applications must be made prior to emergence of the crop. TANK MIXTURES: Apply these tank mixtures in IOta 20 gallons of water or IOta 60 gallons of nitrogen solution per acre. ATRAZINE BICEP II MAGNUM BULLET DUAL II MAGNUM LARIAT LASSO MICRO-TECH For difficult-to-control annual weeds such as fall panicum. barnyard grass. crabgrass, shallercane and broadleaf signal grass up to 2 inches tall. and Pennsylvania smart weed up to 6 inches tall, apply this product at 24 fluid ounces per acre in these tank mixtures. For other labeled annual weeds, apply 18 to 24 fluid ounces of this product per acre when weeds are less than 6 inches tall. and 24 to 36 fluid ounces when weeds are over 6 inches tall. . When using nitrogen solutions as the carrier, the use rate may need to be increased for acceptable weed control. Master Label MQN 78271 Page 22 of 118 Version: Apr·2002 UNMARKED

'"', ...• '.,~. I. MAIN LABEL FOR FOOD CROP USES Spot treatment and Over-the-top wiper applications USE INSTRUCTIONS: This product may be applied as a spot treatment in grain sorghum. Make spot treatments before heading of milo. This product may be applied with wiper applicators to control or suppress the weeds listed under "WIPER APPLICATORS" in the "SELECTIVE EQUIPMENT" section of this label. PRECAUTIONS, RESTRICTIONS: For spot treatment, do not treat more than 10 percent of the total field area to be harvested. The crop receiving spray in treated area will be killed. Take care to avoid drift or spray outside target area for the same reason. For wiper applicators, allow at least 40 days between application and harvest. Do not use roller applicators. Do not feed or graze treated milo fodder. Do not ensile treated vegetation. Hooded sprayers USE INSTRUCTIONS: This product may be used through hooded sprayers for weed control between the rows of milo. Only hooded sprayers that completely enclose the spray pattern may be used. See additional instruction for the use of hooded sprayers in the "APPLICATION EQUIPMENT AND TECHNIQUES" section of this label. Crop injury may occur when the foliage of treated weeds comes into direct contact with leaves of the crop. Do not apply this product when the leaves of the crop are growing in direct contact with weeds to be treated. Droplets, mist, foam or splatter of the herbicide solution may contact the crop and cause discoloration, stunting or destruction. PRECAUTIONS, RESTRICTIONS: Milo must be at least 12 inches tall, measured without extending leaves. Treat before milo sends tillers between the drill rows. If such tillers are contacted with the spray solution, the main plant may be killed. Contact of this product in any manner to any vegetation to which treatment is not intended may cause damage. Such damage shall be the sale responsibility of the applicator. Do not graze or feed milo forage or fodder following applications of this product through hooded sprayers. Do not apply more than 24 fluid ounces of this product per acre per application and no more than 2.3 quarts per acre per year for hooded sprayer applications. Preharvest USE INSTRUCTIONS: Make applications at 30 percent grain moisture or less. PRECAUTIONS, RESTRICTIONS: Do not apply more than 48 fluid ounces of this product per acre. As with other herbicides that cause sudden plant death, avoid pre harvest applications of this product to milo infected with charcoal rot as lodging can occur. Allow a minimum of 7 days between application and harvest of sorghum. Prehurvest application is not recommended for sorghum grown for seed. as a reduction in germination or vigor may occur. The use of this product for preharvest grain sorghum (milo) is not registered in California Post-harvest USE INSTRUCTIONS: This product may be applied after harvest of grain sorghum. Higher rates may be required for control of large weeds which were growing in the crop at the time of harvest. Tank mixtures with 2,4-0 or dicamba may be used. This product may be applied to grain sorghum (milo) stubble following harvest to suppress or control regrowth. Apply 24 fluid ounces of this product per aCre for control, or 18 fluid ounces of this product per acre for suppression. MnSler Label MON 78271 Page 23 of 118 Version: Apr-2002 UNMARKED

1. MAIN LABEL FOR FOOD CROP USES PRECAUTIONS. RESTRICTIONS: Allow a minimum of 7 days between treatment and harvest or feeding of treated vegetation. 8.6 Herbs and Spices LABELED CROPS: Allspice. Angelica. Star anise. Annatto (seed). Balm, Basil, Borage, Burnet, Camomile, Caper buds, Caraway, Black caraway, Cardamom, Cassia bark, Cassia buds, Catnip, Celery seed, Chervil (dried), Chive. Chinese chive, Cinnamon, Clary, Clove buds, Coriander leaf (cilantro or chinese parsley), Coriander seed (cilantro), Costmary, Culantro (leaf), Culantro (seed), Cumin, Curry (leaf), Dill (dillweed), Dill (seed), Epazote, Fennel seed (common and Florence), Fenugreek, White ginger flower, Grains of paradise, Horehound, Hyssop, Juniper berry, Lavender, Lemongrass, Lovage (leaf and seed), Mace, Marigold, Marjoram (including oregano), Mexican oregano, Mioga flower, Mustard (seed), Nasturtium, Nutmeg, Parsley (dried), Pennyroyal, Pepper (black and white), Pepper leaves, Peppermint, Perilla, Poppy (seed), Rosemary, Rue, Saffron, Sage, Savory (summer and winter), Spearmint, Stevia leaves, Sweet bay, Tansy, Tarragon, Thyme, Vanilla, Wintergreen, Woodruff, Wormwood. TYPES OF APPLICATIONS: Those listed in Section 8.0 plus the following: Over-the-top wiper applications (peppermint and spearmint only), Spot treatments (peppermint and spearmint only) PRECAUTIONS, RESTRICTIONS: When applying this product prior to transplanting or direct-seeding crops into plastic mulch, care must be taken to remove residues of this product, which could cause crop injury, from the plastic prior to planting. Residues can be removed by a single O.S-inch application of water, either by natural rainfall or via a sprinkler system. Care should be taken to ensure that the wash water flushes off the plastic mulch and does not enter transplant holes. O,·er-the.top wiper applications or Spot treatments (peppermint and spearmint only) USE INSTRUCTIONS: This product may be used as a spot treatment or wiper application in spearmint and peppermint. Apply spot treatments on a spray-to-wet basis with hand-held equipment, such as backpack and knapsack sprayers, pump-up pressure sprayers, hand-guns, hand-wands or any other hand-held or motorized spray equipment used to direct the spray solution to a limited area. In wiper applications, the applicator should be adjusted so that the wiper contact point is at least 2 inches above the crop. Weeds should be a minimum of 6 inches taller than the crop. PRECAUTIONS. RESTRICTIONS: Allow at least 7 days between application and harvest. Further applications may be made in the same area at 30·day intervals. In spot treatment applications. no more than 10 percent of the total field area to be harvested should be treated at one time. The crop receiving spray in the treated area will be killed. Take care to avoid drift or spray outside the target area for this reason. In wiper applications, contact of the herbicide solution with the crop may result in damage or destruction. 8.7 Oil Seed Crops LABELED CROPS: Borage. Buffalo gourd (seed), Canola, Crambe. Flax. Jojoba. Lesquerella, Meadowfoam, Mustard (seed), Rape, Safflower. Sesame, Sunflower. For Roundup Ready canola, see the "ROUNDUP READY CROPS" section of this label. TYPES OF APPLICATIONS: Those listed in Section 8.0. USE INSTRUCTIONS: This product may be applied before, during or after planting oil seed crops. Broadcast applications must be made prior to emergence of the listed oil seed crops. Wiper applicators or hooded sprayers may be used between the rows once the crop is established. Master Label MON 78271 Page 24 of 118 Version: Apr·2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES TANK MIXTURES: For sunflowers, a tank mixture with Prowl may be applied before, during or after planting in conventional tillage systems, into a cover crop. established sod Or in previous crop residue. PRECAUTIONS, RESTRICTIONS: Do not apply more than 48 fluid ounces of this product per acre on canola .. Do not apply more than 24 fluid ounces of this product per acre for sunflowers as a single preplant or preemergent application per year. Do not feed or graze sunflower forage following application of this product. 8.8 Soybeans TYPES OF APPLICATIONS: Those listed in Section 8.0 plus the following: spot treatment, preharvest, selective equipment. For Roundup Ready soybeans, see the "ROUNDUP READY CROPS" section of this label. Preplant, Preemergence and At-planting USE INSTRUCTIONS: This product may be applied alone or in a tank·mixture before, during or after planting soybeans. Applications must be made prior to emergence of the crop. TANK MIXTURES: Apply these tank mixtures in IOta 20 gallons of water per acre. AIM'M DUAL II MAGNUM MICRO·TECH AMPLlFYTM FIRSTRATFM PROWL ASSURE IJTM FLEXST ARTM PURSUITTM AUTHORITYTM FRONTJERTM/OUTLOOKTM PURSUIT PLUS BOUNDARYTM FUSIONTM REFLEXTM CANOPVTM GAUNTLETTM SCEPTERTM CANOPY XLTM LASSO SENCORTMILEXONETM COMMANDTM LINEXTM SQUADROWM COMMAND XTRATM LOROXILINURON STEEUM DOMAIWM DUAL MAGNUM LOROX PLUSTM VALORTM This product may be tank·mixed with 2,4·D or 2.4-DB. See the 2,4-D label for intervals between application and planting. For difficult·to·control annual weeds such as fall panic urn, barnyard grass. crabgrass, shallercane and broadleaf signalgrass up to 2 inches tall, and Pennsylvania smartweed up to 6 inches tall, apply this product at 24 fluid ounces per acre in these tank mixtures. For other labeled annual weeds, apply 18to 24 fluid ounces of this product per acre when weeds are less than 6 inches tall, and 24 to 36 fluid ounces when weeds are over 6 inches tall. PRECAUTIONS, RESTRICTIONS: The tank-mix recommendations in this section are not registered in California. Spot treatment USE INSTRUCTIONS: For spot treatments, apply this product prior to initial pod set in soybeans. PRECAUTIONS, RESTRICTIONS: Do not treat more than 10 percent of the total field aiea to be harvested. The crop receiving spray in treated area will be killed. Take care to avoid drift or spray outside target area for the same reason. Preharvest Master Label MON 78271 Page 25 of118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES USE INSTRUCTIONS: This product provides weed control when applied prior to harvest of soybeans. Apply at rates given in the "ANNUAL WEEDS, PERENNIAL WEEDS AND WOODY BRUSH RATE T ABLES". This product may be applied using either aerial or ground spray equipment. Apply after pods have set and lost all green color. Care should be taken to avoid excessive seed shatter loss due to ground application equipment. PRECAUTIONS, RESTRICTIONS: Do not apply more than 4 quarts per acre of this product for pre harvest applications. Do not apply more than 48 fluid ounces per acre of this product by air. Allow a minimum of 7 days between application and harvest of soybeans. Do not graze or harvest treated hay or fodder for livestock feed within 25 days of last preharvest application. (If the application rate is 24 fluid ounces per acre or lower, the grazing restriction is reduced to 14 days after last preharvest application.) Preharvest application is not recommended for soybeans grown for seed, as a reduction in germination or vigor may occur. Selective equipment USE INSTRUCTIONS: This product may be applied through recirculating sprayers, shielded applicators, hooded sprayers, wiper applicators or sponge bars in soybeans. Allow at least 7 days between application and harvest. PRECAUTIONS, RESTRICTIONS: See the "SELECTIVE EQUIPMENT" part of the "APPLICATION EQUIPMENT AND TECHNIQUES" section of this label for information on proper use and calibration of this equipment. 8,9 Sugarcane TYPES OF APPLICATIONS: Those listed in Section 8.0 plus Spot Treatment.. Preplant, At-planting, Preemergence USE INSTRUCTIONS: This product may be applied in or around sugarcane fields or in fields prior to the emergence of plant cane. PRECAUTIONS, RESTRICTIONS: Do not apply to vegetation in or around ditches, canals or ponds containing water to be used for irrigation. Spot treatment USE INSTRUCTIONS: This product may be applied as a spot treatment in sugarcane. For control of volunteer or diseased sugarcane, make a 1 percent solution of this product in water and spray-ta-wet the foliage of vegetation to be controlled. Volunteer or diseased sugarcane should have at least 7 new leaves. PRECAUTIONS, RESTRICTIONS: Avoid spray contact with healthy cane plants since severe damage or destruction may result. Do not feed or graze treated sugarcane foliage following application. Fallow treatments USE INSTRUCTIONS: This product may be used as a replacement for tillage in fields that are lying fallow between sugarcane crops. This product may also be used to remove the last stubble of ratoon cane. For removal oflast stubble of Tatoon cane, apply 2.8 to 4 quarts of this product in 10 to 40 gallons of water per acre to new growth having at least 7 new leaves. Allow 7 or more days after application before tillage. Ground or aerial application equipment may be used. Applications up to 2.3 quarts per acre may be made by aerial application Maslcr Label MON 78271 Page 26 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES in fallow sites where there is sufficient buffer to prevent injury due to drift onto adjacent crops. Tank mixtures with 2,4·D and dicamba may be used. Hooded sprayers USE INSTRUCTIONS: This product may be used through hooded sprayers for weed control between the rows of sugarcane. See the "APPLICATION EQUIPMENT AND TECHNIQUES" section of this label for additional use instructions. PRECAUTIONS, RESTRICTIONS: Do not allow treated weeds to come into contact with the crop. Droplets, mist, foam or splatter of the herbicide solution settling on the crop may result in discoloration, stunting or destruction. Such damage shall be the sole responsibility of the applicator. 8,10 Vegetable Crops NOTE: THIS "VEGETABLE CROPS" SECTION GIVES GENERAL DIRECTIONS THAT APPLY TO ALL LISTED VEGETABLE CROPS WITHIN SECTION 8.10 GROUPED ALPHABETICALLY BELOW. SEE THE INDIVIDUAL CROP CATEGORIES FOR SPECIFIC INSTRUCTIONS, PREHARVEST INTERVALS, PRECAUTIONS AND RESTRICTIONS. TYPES OF APPLICATIONS: Chemical Fallow, Preplant Fallow Beds, Preplant, Preemergence, Prior to transplanting vegetables, At-Planting, Hooded Sprayers in row-middles, Shielded Sprayers in row-middles, Wiper Applicators in row-middles, and Post-harvest, Directed applications (nonbearing ginseng), Over-the-lop wipers (rutabagas only). PRECAUTIONS, RESTRICTIONS: When applying this product prior to transplanting or direct-seeding crops into plastic mulch, care must be taken to remove residues of this product, which could cause crop injury, from the plastic prior to planting. Residues can be removed by a single D.5-inch application of water, either by natural rainfall or via a sprinkler system. Care should be taken to ensure that the wash water flushes off the plastic mulch and does not enter transplant holes. Applications made at emergence will result in injury or death to emerged seedlings. Avoid contact of herbicide with foliage, green shoots or stems, bark, exposed roots (including those emerging from plastic mulch), or fruit of crops because severe injury or destruction may result. When making preemergence and at planting applications, applications must be made before crop emergence to avoid severe· crop injury. Apply before seed germination in coarse sandy soils to further minimize the risk of injury. In crops with vines, hooded sprayer, shielded sprayer and wiper applications to row middles should be made prior to vine development otherwise severe injury or destruction may result. Unless otherwise specified in this product'S labeling, treatments with selective equipment including wipers and hooded sprayers must be made al least 14 days prior to harvest. Post-harvest Or fallow applications must be made at least 30 days prior to planting any non-labeled crop. See "APPLICATION EQUIPMENT AND TECHNIQUES" section of this label for additional information. 8,10,1 Brassica Vegetables LABELED CROPS: Broccoli, Chinese broccoli (gai Ion), Broccoli raab (rapini), Brussels sprouts, Cabbage, Chinese cabbag. (bok choy), Chinese cabbage (napa), Chinese mustard cabbage (gai choy), Cauliflower, Cavalo broccolo, Collards, Kale, Kohlrabi. Mizuna, Mustard greens, Mustard spinach, Rape greens. 8.10,2 Bulb Vegetables LABELED CROPS: Garlic, Great-headed garlic, Leek, Onion (dry bulb and green), Welsh onion, Shallot. Master Label MON 78271 Page 27 of 118 Version: Apr-1OO2 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES 8.10.3 Cucurbft Vegetables and fruits LABELED CROPS: Chayote (fruit), Chinese waxgourd (Chinese preserving melon), Citron melon, Cucumber, Gherkin, Edible gourd (includes hyotan, cucuzza, hechima, Chinese okra), Melons (all), Momordica spp (includes balsam apple, balsam pear, bittermelon, Chinese cucumber), Muskmelon (includes cantaloupe, casaba, crenshaw melon, golden pershaw melon, honeydew melon, honey ball melon, mango melon, Persian melon, pineapple melon, Santa Claus melon, snake melon), Pumpkin, Summer squash (includes crook neck squash, scallop squash, straight neck squash, vegetable marrow, zucchini), Winter squash (includes butternut squash, calabaza, hubbard squash, acorn squash, spaghetti squash), Watermelon. PRECAUTIONS, RESTRICTIONS: For Cantaloupe, Casaba melon, Crenshaw melon, Cucumber, Gherkin, Gourds, Honeydew melon, Honey ball melon, Mango melon, Melons (all), Muskmelon, Persian melon, Pumpkin, Squash (summer, winter), and Watermelon, allow at least 3 days between application and planting. 8.10.4 Leafy Vegetables LABELED CROPS: Amaranth (Chinese spinach). Arugula (raquette). Beet greens, Cardoon. Celery. Chinese celery. Celtuce. Chaya. Chervil, Edible·leaved chrysanthemum. Garland chrysanthemum. Corn salad, Cress (garden and upland). Dandelion. Dock (sorrel), Dokudami. Endive (escarole). Florence fennel. Gow kee, Lettuce (head and leaf), Orach. Parsley. Purslane (garden and winter). Radicchio (red chicory). Rhubarb. Spinach, New Zealand spinach, Vine spinach, Swiss chard. Watercress (upland), Water spinach. PRECAUTIONS. RESTRICTIONS: For Watercress. avoid applications within 3 days prior to seeding and during the period between seeding and emergence to minimize the risk of injury. 8.10.S Fruiting Vegetables LABELED CROPS: Eggplant, Groundcherry (Plmalis spp). Pepino. Pepper (includes bell pepper. chili pepper. cooking pepper. pimento, sweet pepper). Tomatillo. Tomato PRECAUTIONS. RESTRICTIONS: For Eggplant, Ground cherry. Pepper (all). and Tomatillo, allow at least 3 days between application and planting. For tomato, do not make hooded or shielded sprayer applications in row middles because of potential for crop injury. 8.10.6 Legume Vegetables (succulent or dried) LABELED CROPS: Bean (Lupinus: includes grain lupin. sweet lupin. white lupin. and white sweet lupin). Bean (Phaseolus: includes field bean, kidney bean. lima bean. navy bean, pinto bean, runner bean, snap bean, tepary bean. wax bean), Bean (Vigna: includes adzuki bean, asparagus bean, blackeyed pea. catjang, Chinese long bean. cowpea, crowder pea, moth bean. mung bean. rice bean. southern pea, urd bean. yardlong bean), Broad bean (fava). Chickpea (garbanzo). Guar. Jackbean, Lablab bean. Lentil. Pea (Pisum: includes dwarf pea. edible· podded pea. English pea. field pea, garden pea, green pea. snowpea, sugar snap pea). Pigeon pea. Soybean (immature seed). Sword bean. 8.10.7 Root and Tuber Vegetables LABELED CROPS: Arracacha. Arrowroot. Chine,e artichoke, Jerusalem artichoke. Beet (garden). Burdock. Canna. Carrot, Cassava (bitter and sweet), Celeriac, Chayote (root), Chervil (turnip· rooted), Chicory, Chufa. Dasheen (taro). Galangal, Ginger. Ginseng. Horseradish. Leren, Kava (turnip·rooted), Parsley (turnip rooted), Parsnip. Potato. Radish. Oriental radish, Rutabaga. Salsify, Black salsify. Spanish salsify, Skirret. Sweet potato, Tanier. Turmeric. Turnip. Wasabi. Yacon, Yam bean. True yam. Directed applications (non· bearing ginseng only) Master Label MON 78271 Page 28 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES USE INSTRUCTIONS; This product may be used for general weed control in established non-bearing ginseng. Applications may be made with boom equipment, CDA, shielded sprayers, hand-held and high volume wands, lances, and orchard guns or with wiper application equipment. PRECAUTIONS, RESTRICTIONS; Direct applications so that there is no contact of this product with the ginseng plant. Applications must be made at least one year prior to harvest. Over-the-top wiper applications (rutabagas only) USE INSTRUCTIONS; Wiper applicators may be used over-the-top of rutabagas. PRECAUTIONS, RESTRICTIONS; Allow at least 14 days between application and harvest of rutabagas. 8_11 Miscellaneous Crops LABELED CROPS; Aloe vera, Asparagus, Bamboo shoots, Globe artichoke, Okra, Peanut (ground nut), Pineapple, Strawberry, Sugar beet TYPES OF APPLICATIONS; Those listed in Section 8.0 plus the following; General weed control, Site preparation, Spot treatment (Asparagus) For Roundup Ready sugar beets, see the "ROUNDUP READY CROPS" section of this label. PRECAUTIONS, RESTRICTIONS; Avoid contact of herbicide with foliage, green shoots or stems, bark, exposed roots (including those emerging from plastic mulch), or fruit of crops because severe injury or destruction may result. When making preemergence and at planting applications, applications must be made before crop emergence to avoid severe crop injury. Apply before seed germination in coarse sandy soils to further minimize the risk of injury. In crops with vines, hooded sprayer, shielded sprayer and wiper applications to row middles should be made prior to vine development otherwise severe injury or destruction may result. Unless otherwise specified in this product's labeling, treatments with selective equipment including wipers and hooded sprayers must be made at least 14 days prior to harvest. Post-harvest or fallow applications must be made at least 30 <lays prior to planting any non-labeled crop. See "APPLICATION EQUIPMENT AND TECHNIQUES" section of this label for additional information. General weed control, site preparation USE INSTRUCTIONS; This product may be applied for general weed control or for site preparation prior to planting or transplanting crops listed in this section. PRECAUTIONS, RESTRICTIONS; When applying this product prior to transplanting or direct-seeding crops into plastic mulch, care must be taken to remove residues of this product, which could cause crop injury, from the plastic prior to planting. Residues can be removed by a single O.S-inch application of water, either by natural rainfall or via a sprinkler system. Care should be taken to ensure that the wash water flushes off the plastic mulch and does not enter transplant holes. Applications made at emergence will result in injury or death to emerged seedlings. Do not apply within a week before the first asparagus spears emerge. Do not feed or graze treated pineapple forage following application. Spot treatment (Asparagus) USE INSTRUCTIONS; This product may be applied immediately after cutling, but prior to the emergence of new spears. Master Label MON 78271 Page 29 of 118 Version: Apr·2002 UNMARKED

1. MAIN LABEL FOR FOOD CROP USES PRECAUTIONS, RESTRICTIONS: Do not treat more than 10 percent of the total field area to be harvested. Do not harvest within 5 days of treatment. Post-harvest (Asparagus) USE INSTRUCTIONS: This product may be applied after the last harvest and all spears have been removed. If spears are allowed to regrow, delay application until ferns have developed. Delayed treatments should be applied as a directed or shielded spray in order to avoid contact of the spray with ferns, stems or spears. PRECAUTIONS, RESTRICTIONS: Direct contact of the spray with the asparagus may result in serious crop injury. Select and use recommended types of spray equipment for postemergence post-harvest applications. A directed spray is any application where the spray panern is aligned in such a way as to avoid direct contact of the spray with the crop. A shielded spray is any application where a physical barrier is positioned and maintained between the spray and the crop to prevent contact of spray with the crop. 9.0 TREE, VINE, AND SHRUB CROPS (A Iphabetica) NOTE: THIS SECTION GIVES GENERAL DIRECTIONS THAT APPLY TO ALL LISTED TREE, VINE, AND SHRUB CROPS WITHIN SECTION 9 GROUPED ALPHABETICALLY BELOW. SEE THE INDIVIDUAL CROP CATEGORIES FOR SPECIFIC INSTRUCTIONS, PREHARVEST INTERVALS, PRECAUTIONS AND RESTRICTIONS. TYPES OF APPLICATIONS: Preplant (site preparation) broadcast sprays, general weed control, middles (between rows of trees. vines or bushes), strips (within rows of trees. vines or bushes), selective equipment (shielded sprayers, wiper treatments), directed sprays, spot treatments, perennial grass suppression, cut stump. Applications may be made with boom equipment, CDA equipment, shielded sprayers, hand-held and high­ volume wands. lances. orchard guns or with wiper applicator equipment, except as directed. GENERAL USE INSTRUCTIONS: This product may be applied in middles (between rows of trees or vines), strips (within rows of trees or vines), and for general weed control or perennial grass suppression in established tree fruit and nut groves. orchards. berries, and vineyards. It may also be used for site preparation prior to planting or transplanting these crops. Apply 12 fluid ounces to 4 quarts per acre according to the "ANNUAL and PERENNIAL WEEDS RATE T ABLES" sections of this label. Utilize rates at the higher end of the recommended rate range when weeds are stressed, growing in dense populations Or are greater than 12 inches tall. Repeat applications may be made up to a maximum of 8 quarts per acre per year. The maximum use rates stated throughout this product's labeling apply to this product combined with the use of all other herbicides containing glyphosate or sulfosate as the active ingredient. whether applied as mixtures or separately. Calculate the application rates and ensure that the total use of this and other glyphosate or sulfosate containing products does not exceed stated maximum use rate. GENERAL PRECAUTIONS, RESTRICTIONS: Extreme care must be exercised to avoid contact of herbicide solution, spray, drift or mist with foliage or green bark of trunk, branches, suckers, fruit or other parts of trees, canes and vines. Avoid applications when recent pruning wounds or other mechanical injury has occurred. Contact of this product with other than matured brown bark can result in serious crop damage or destruction. Only shielded or directed sprayers may be used in crops with potential for crop contact, and then only where there is sufficient clearance. For applications in strips (within rowS of trees), only selective equipment (directed sprays, hooded sprayers, shielded applicators, Or wipers) should be used to minimize the potential for leakage or drift of herbicide sprays onto crop. For berry crops, hooded or shielded sprayers must be fully enclosed including top, sides, front and back. Only wipers or Master Label MON 78271 Page 30 of 118 Version: Apr·2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES shielded applicators capable of preventing all contact with crop may be used. See "APPLICATION EQUIPMENT AND TECHNIQUES" section of this label for additional directions and precautions. Allow a minimum of 3 days between application and transplanting. Middles (between rows) USE INSTRUCTIONS: This product will control or suppress annual and perennial weeds and ground covers growing between the rows of labeled tree and vine crops. If weeds are under drought stress. irrigate prior to application. Reduced control may result if weeds have been mowed prior to application. TANK MIXTURES: A tank mixture of this product plus Goal 2XL may be used for annual weeds in middles between rows of citrus crops, tree frui-ts, tree nuts and vine crops. This mixture is recommended when weeds are stressed or growing in dense populations. 12 to 24 fluid ounces per acre of this product plus 3 to 12 fluid ounces per acre of Goal 2XL will control annual weeds with a maximum height or diameter of 6 inches. including crabgrass. common groundsel. junglerice. common lambsquarters. redroot pigweed. London rocket, common ryegrass. shepherd·s-purse. annual sowthistJe. filaree (suppression). horseweedlmarestail. stinging nettle and COmmon purslane (suppression). 12 to 24 fluid ounces per acre of this product plus 3 to 12 fluid ounces per acre of Goal 2XL will control COmmon cheeseweed (malva) or hairy fleabane with a maximum height or diameter of 3 inches. Strips (in rows) TANK MIXTURES: This product may be applied in rows of tree or vine crops in tank mixtures with the following products: DEVRINOLTM 50 OF DIREX'M 4L GOAL2XL KARMEXOF KROVARI PROWL PRINCEP CALIBER TM90 SIMAZINE4L SIMAZINE SOW SIM-TROLTM 4L SOLICAM'M OF SURFLAN'M AS SURFLAN75W Do not apply these tank mixtures in Puerto Rico. Refer to the individual product labels for specific crops. rates. geographic restrictions and precautionary statements. Perennial grass suppression This product will suppress perennial grasses such as bahiagrass. Bermudagrass. tall fescue. orchard grass. Kentucky bluegrass. and quackgrass that are grown as ground covers in tree and vine crops. For suppression of tall fescue. fine fescue. orchard grass and quackgrass. apply 5 fluid ounces of this product in 10 to 20 gallons of water per acre. For suppression of Kentucky bluegrass covers. apply 5 fluid ounces of this product per acre. Do not add ammonium sulfate. For best results. mow cool season grass covers in the spring to even their height and apply this product 3 to 4 days after mowing. Master Label MON 78271 Page 31 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES For suppression of vegetative growth and seedhead inhibition of bahiagrass for approximately 45 days, apply 5 fluid ounces of this product in 10 to 25 gallons of water per acre. Apply I to 2 weeks after full green-up or after mowing to a uniform height of 3 to 4 inches. This application must be made prior to seedhead emergence. For suppression up to 120 days, apply 3 fluid ounces of this product per acre, followed by an application of 2 to 3 fluid ounces per acre about 45 days later. Make no more than 2 applications per year. For burndown of Bermudagrass, apply 24 to 48 fluid ounces of this product in 3 to 20 gallons of water per acre. Use this treatment only if reduction of the Bermudagrass stand can be tolerated. When bumdown is required prior to harvest. allow at least 21 days to ensure sufficient time for bumdown to occur. For suppression of Bermudagrass. apply 5 to 12 fluid ounces of this product per acre east of the Rocky Mountains and 12 fluid ounces of this product per acre west of the Rocky Mountains. Apply in a total spray volume of 3 to 20 gallons per acre. no sooner than I to 2 weeks after full green-up. If the Bermudagrass is mowed prior to application. maintain a minimum of 3 inches in height. Sequential applications may be made when regrowth oCCUrs and Bermudagrass injury and stand reduction can be tolerated. East of the Rocky Mountains. rates of 5 to 8 fluid ounces of this product per acre should be used in shaded conditions or where a lesser degree of suppression is desired. Cut stump (Tree crops) USE INSTRUCTIONS: Cut stump applications of this product may be made during site preparation or site renovation, prior to transplanting tree crops. This product wiH control regrowth of cut stumps and resprouts of many types of tree species. some of which are listed below. Citrus Trees: Calamondin, Chironja. Citron, Citrus hybrids, Grapefruit, Kumquat, Lemon. Lime, Mandarin (Tangerine). Orange (all), Pummelo. Tangelo, Tangor. Fruit Trees: Apple, Apricot, Cherry (sweet, sour), Crabapple, Loquat, Mayhaw, Nectarine, Olive, Peach, Pear, PlumlPrune (all), Quince. Nut Trees: Almond, Beechnut, Brazil nut, Butternut, Cashew, Chestnut, Chinquapin, Filbert (hazelnut), Hickory Nut, Macadamia, Pecan, Pistachio, Walnut (black, English). Apply this product using suitable equipment to ensure coverage of the entire cambium. Cut trees or resprouts· close to the soil surface. Apply a 50 to 100 percent solution of this product to the freshly cut surface immediately after cutting. Delays in application may result in reduced performance. For best results, applications should be made during periods of active growth and full leaf expansion. PRECAUTIONS, RESTRICTIONS: DO NOT MAKE CUT STUMP APPLICATIONS WHEN THE ROOTS OF ADJ ACENT DESIRABLE TREES MAY BE GRAFTED TO THE ROOTS OF THE CUT STUMP. INJURY RESULTING FROM ROOT GRAFTING MAY OCCUR IN ADJACENT TREES. Some sprouts, stems. or trees may share the same root system. Adjacent trees having a similar age. height and spacing may signal shared roots. Whether grafted or shared, injury is likely to occur to non-treated stems/trees when one or more trees sharing common roots are treated. 9,1 Berry Crops LABELED CROPS: Blackberry (including bingleberry, black satin berry, boysenberry, Cherokee blackberry, chesterberry, Cheyenne blackberry, coryberry,darrowberry. dewberry, Dirksen thornless berry, Himalayaberry, hullberry, juneberry, lavacaberry, lowberry, lucretia berry , marionberry, nectarberry, olaliieberry, Oregon evergreen berry, phenomenalberry, rangeberry, ravenberry, rossberry, Shawnee blackberry, and youngberry), Master Label MON 78271 Page 32 of 118 Version: Apr·2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES Blueberry. Cranberry. Currant. Elderberry. Gooseberry. Huckleberry. Loganberry. Raspberry (black. red). SaIal. TYPES OF APPLICATIONS: Those listed in Section 9.0 plus Spot Treatment in Cranberry Production and Post-Harvest Treatments in Cranberry Production. PRECAUTIONS. RESTRICTIONS: To avoid damage. herbicide sprays must not be allowed to contact desirable vegetation. inc luding green shoots. canes. or foliage. Allow a minimum of 30 days between last application and harvest in cranberries. Allow a minimum of 14 days between last application and harvest in other berry crops. Do not make directed sprays within the cranberry bush areas prior to berry harvest. Spot treatment in cranberry production USE INSTRUCTIONS: Spot treatments may be used to control weeds growing in dry ditches (interior and perimeter) of cranberry production areas. Hand-held sprayers or other appropriate application equipment listed under "APPLICATION EQUIPMENT AND TECHNIQUES" in this label may be used. Drop water level to remove standing water in ditches prior to application. In hand-held sprayers. use I to 1.7 percent solution of this product. Spray to wet vegetation. not to run-off. PRECAUTIONS. RESTRICTIONS: For treatments after draw down of water in dry ditches. allow 2 or more days after treatment before reintroduction of water to achieve maximum weed control. Apply this product within 1 day after draw down to ensure application to actively growing weeds. AlIow a minimum of 30 days between last application and harvest of cranberries. Do not apply this material through the irrigation system. Do not make applications by air. Do not apply directly to water. Use nozzles that emit medium- to large-sized droplets to minimize drift in order to avoid crop injury. Post-harvest treatments in cranberry production USE INSTRUCTIONS: Application of this product may be made after the harvest of cranberries to control weeds growing within the field. Best results will be obtained if applications are made to vines that appear dormant (after they have turned red). Hand-held sprayers. wipers. or other appropriate application equipment listed under "APPLICATION EQUIPMENT AND TECHNIQUES" in this label may be used. If using hand­ held sprayers. use a 0.5 to 0.8 percent solution of this product. Spray to wet vegetation. not to run-off. !fusing hand-held boom sprayers. apply 1.5 to 4 quarts of this product per acre. PRECAUTIONS. RESTRICTIONS: Make applications only after cranberries have been harvested. Do not treat more than 10 percent of the total bog. Allow a minimum of 6 months after last application and next harvest of cranberries. Do not apply this product through the irrigation system. Do not make applications by air. Do not apply directly to water. Even though vines appear dormant. contact of the herbicide solution with desirable vegetation may result in damage or severe plant injury. Cranberry plants that are directly sprayed may be killed. 9.2 Citrus LABELED CROPS: Calamondin. Chironja. Citron. Citrus Hybrids. Grapefruit. Kumquat. Lemon. Lime. Mandarin (tangerine). Orange (all). Pummelo. Satsuma Mandarin. Tangelo (ugli). Tangor. TYPES.OF APPLICATIONS: Those listed in Section 9.0. USE INSTRUCTIONS (The recommendations below penain to applications in Florida and Texas): For burndown or control of the weeds listed below. apply the recommended rates of this product in 3 to 30 gallons of water per acre. Where weed foliage is dense. use 10 to 30 gallons of water per acre. Master Label MON 78271 Page33 of 118 Version: Apr-2002 UNMARKED

., I. MAIN LABEL FOR FOOD CROP USES For goatweed, apply 1.5 to 2.3 quarts of this product per acre. Apply in 20 to 30 gallons of water per acre when plants are actively growing. Use 1.5 quarts per acre when plants are less than 8 inches tall and 2.3 quarts per aCre when plants are greater than 8 inches tall. If goatweed is greater than 8 inches tall, the addition of Krovar™ I or Karmex™ may improve control. Refer to the individual product labels for specific crops, rates. geographic restrictions and precautionary statements. Perennial weeds: S = Suppression B = Burndown PC = Partial control C = Control WEED (INSERT BRAND NAME RATE PER ACRE SPECIES 0.8 QT 1.5 QT 2.3QT 4QT Bermudagrass B PC C Guineagrass Texas and Florida Ridge B C C C Florida Flatwoods B C C Paragr3ss B C C C T orpedograss S PC C PRECAUTIONS, RESTRICTIONS: Allow a minimum of I day between last application and harvest in citrus crops. For citron groves, apply as directed sprays only. 9.3 Miscellaneous Tree Food Crops LABELED CROPS: Cactus (fruit and pads), Palm (heart, leaves), Palm (oil). TYPES OF APPLICATIONS: Those listed in Section 9.0. 9.4 Non-Food Tree Crops LABELED CROPS: Pine, Poplar, Eucalyptus, Christmas Trees, Other non-food tree crops. TYPES OF APPLICATIONS: Those listed in Section 9.0. Directed Sprays, Spot Treatment, Wipers USE INSTRUCTIONS: This product may be used as a post-directed spray and spot treatment around established poplar, eucalyptus, Christmas trees and other non-food tree crops. PRECAUTIONS, RESTRICTIONS: Care must be exercised to avoid contact of spray, drift or mist with foliage or green bark of established Christmas trees and other pine trees. Desirable plants may be protected from the spray solution by using shields or coverings made of cardboard or other impermeable material. THIS PRODUCT IS NOT RECOMMENDED FOR USE AS AN OVER-THE-TOP BROADCAST SPRAY IN CHRISTMAS TREES AND OTHER PINE TREES. Site preparation USE INSTRUCTIONS: This product may be used prior to planting Christmas trees. Master Label MON 78271 Page 34 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES PRECAUTIONS, RESTRICTIONS: Precautions should be taken to protect nontarget plants during site preparation applications. 9,S Pome Fruit LABELED CROPS: Apple, Crabapple, Loquat, Mayhaw, Pear (including oriental pear), Quince. TYPES OF APPLICATIONS: Those listed in Section 9.0. PRECAUTIONS, RESTRICTIONS: Allow a minimum of I day between last application and harvest in pome crops. 9,6 Stone Fruit LABELED CROPS: Apricot, Cherry (sweet, tart), Nectarine, Olive, Peach, PlumlPrune (all types), Plumco!. TYPES OF APPLICATIONS: Those listed in Section 9.0. PRECAUTIONS, RESTRICTIONS: Allow a minimum of 17 days between last application and harvest in stone fruit crops. For olive groves, apply as directed sprays only. Restrictions on application equipment For cherries, any application equipment listed in Section 9.0 may be used in all states. Any application equipment listed in Section 9.0 may be used in apricots, nectarines, peaches and plums/prunes growing in Arizona, California, Colorado, Idaho, Kansas, Kentucky, New Jersey, Nonh Dakota, Oklahoma, Oregon, Texas, Utah and Washington, except for peaches grown in the states specified in the following paragraph. In all other states, use wiper equipment only. For PEACHES grown in Alabama, Arkansas, Florida, Georgia, Louisiana, Mississippi, Nonh Carolina, South Carolina and Tennessee only, apply with a shielded boom sprayer or shielded wiper applicator, which prevents any contact of this product with the foliage or bark of trees. Apply no later than 90 days after first bloom. Applications made after this time may result in severe damage. Remove suckers and low· hanging limbs at least 10 days prior to application. Avoid applications near trees with recent pruning wounds or other mechanical injury. Apply only near trees that have been planted in the orchard for 2 or more years. EXTREME CARE MUST BE TAKEN TO ENSURE NO PART OF THE PEACH TREE IS CONTACTED. 9,7 Tree Nuts LABELED CROPS: Almond, Beechnut, Betelnut, Brazil nut, Bullernut, Cashew, Chestnut, Chinquapin, Coconut, Filbert (hazelnut), Hickory nut, Macadamia, Pecan, Pine nut, Pistachio, Walnut (black, English) TYPES OF APPLICATIONS: Those listed in Section 9.0. PRECAUTIONS, RESTRICTIONS: Allow a minimum of 3 days between last application and harvest of tree nuts, except coconut. Allow 14 days between application and harvest in coconu!. 9,8 Tropical and Subtropical Trees and Fruits Master Label MON 7827) Page 35 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES LABELED CROPS: Ambarella, Atemoya, Avocado, Banana, Barbados cherry (acerola), Biriba, Blimbe, Breadfruit, Cacao (cocoa) bean, Canistel. Carambola (starfruit), Cherimoya, Coffee, Custard apple, Dates, Durian, Feijoa, Figs, Governor's plum, Guava, llama, Imbe, Imbu, Iaboticaba, Iackfruit, Longan, Lychee, Marney apple, Mango, Mangosteen, Marmaladebox (genip), Mountain papaya, Papaya, Pawpaw, Plantain, Persimmon, Pomegranate, Pulasan, Rambutan, Rose apple, Sapodilla, Sapote (black, marney, white), Spanish lime, Soursop, Star apple, Sugar apple, Surinam cherry, Tamarind,Tea, Ti (roots and leaves),Wax jambu. TYPES OF APPLICATIONS: Those listed in Section 9.0 plus Bananacide (Banana only). PRECAUTIONS, RESTRICTIONS: Allow a minimum of 1 day between last application and harvest in banana, guava, papaya, and plantain crops. Allow a minimum of 14 days between last application and harvest for any other tropical or subtropical tree fruit. Allow a minimum of 28 days between last application and harvest in coffee crops. In coffee and banana, delay applications 3 months after transplanting to allow the new coffee or banana plant to become established. Bananacide (banana only) USE INSTRUCTIONS: This product may be used to destroy banana plants infected with the Banana Bunchy Top Virus as well as non-infected banana plants to establish disease free buffers around plantations. Remove all fruit from the plants within the treatment area prior to treatment. Inject 1125 fluid ounce (l mL) of this product's concentrate per 2 to 3 inches of pseudostem diameter. Make the injection at least one foot above the ground, except for very small plants, which should be injected vertically into the top. Any subsequent regrowth must also be destroyed. All plants and mats (or units) adjacent (within a 4-foot radius) to a treated mat shall be mechanically destroyed. For control of the Banana Bunchy Top Virus, it is critical that the grower follow a strict control program involving monitoring for diseased plants, spraying to control the aphid vector, and destruction of all infected mats (or units). An infected plant may not show symptoms of the banana bunchy top virus for up to 125 days, therefore it is critical that the entire mat (or unit) containing the diseased plant be destroyed immediately. PRECAUTIONS, RESTRICTIONS: Do not apply more than 1/2 fluid ounce (15 mL) of this product's concentrate per mat (or unit). Remove all fruit from plants and mats (or units) prior to treatment. Do not harvest any fruit or plant materials from treated mats (or units) following injection. Do not allow livestock to consume treated plant materials. Following transplant of new banana plants into treated areas, allow plants to become established for 3 months before applying this product for general weed control. 9,9 Vine Crops LABELED CROPS: Grapes (raisin, table, wine) Hops, Kiwi, Passion fruit. TYPES OF APPLICATIONS: Those listed in Section 9.0. USE INSTRUCTIONS: Applications should not be made when green shoots, canes or foliage are in the spray zone. In the northeast and Great Lakes regions, applications must be made prior to the end of bloom stage of grapes to avoid injury, or make applications with shielded sprayers or wiper equipment. PRECAUTIONS, RESTRICTIONS: Allow a minimum of 14 days between last application and harvest in vine crops. Do not use selective equipment in kiwi. 10,0 PASTURE GRASSES, FORAGE LEGUMES AND RANGELANDS Master Label MON 78271 Page 36 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES 10.1 Alfalfa, Clover, and Otber Forage Legumes LABELED CROPS: Alfalfa. Clover. Kenaf. Kudzu. Lespedeza. Leucaena. Lupin. Sainfoin. Trefoil. Velvet bean. Vetch (all types). TYPES OF APPLICATIONS: Preplant. Preemergence. At-planting. Spot treatment (alfalfa and clover only). Wiper applicators (alfalfa and clover only). Renovation. Preharvest (alfalfa only). Preplant, Preemergence and At-planting USE INSTRUCTIONS: This product may be applied before. during or after planting crops listed in this section. Applications must be made prior to emergence of the crop. PRECAUTIONS. RESTRICTIONS: If a single application is made at rates of 48 fluid ounces per acre or less. no waiting period between treatment and feeding or grazing is required. If applications rates greater than 48 fluid ounces per acre are made, remove domestic livestock before application and wait 8 weeks after application before grazing or harvesting. Preharvest (Alfalfa only) USE INSTRUCTIONS: This product may be used in declining alfalfa stands or any stand of alfalfa where crop destruction is acceptable. This application will severely injure or destroy the stand of alfalfa. This product will control annual and perennial weeds. including quackgrass. when applied prior to the harvest of alfalfa. The treated crop and weeds can be harvested and fed to livestock after 36 hours. Allow a minimum of 36 hours between application and harvest. Applications may be made at any time of the year. Make only one application to an existing stand of alfalfa per year. For control of quackgrass. apply in the spring. late summer or fall when quack grass is actively growing. Treatments for quackgrass must be followed by deep tillage for complete control. PRECAUTIONS. RESTRICTIONS: Do not apply more than 48 fluid ounces of this product per acre as a preharvest treatment. Preharvest application is not recommended for alfalfa grown for seed, as a reduction in germination or vigor may occur. Spollrealment or Wiper applications (Alralfa and Clover only) USE INSTRUCTIONS: This product may be applied as a spOt treatment in alfalfa Or clover. This product may be applied with wiper applicators to control or suppress the weeds listed under "WIPER APPLICATORS" in the "SELECTIVE EQUIPMENT" section of this label. Applications may be made in the Same area at 30-day intervals. PRECAUTIONS. RESTRICTIONS: For spot treatment and wiper applications. apply in areas where the movement of domestic livestock can be controlled. No more than \0 percent of the total field area should be treated at one time. Remove domestic livestock before application and wait 14 days after application before grazing livestock or harvesting. Renovation USE INSTRUCTIONS: This product may be applied as a broadcast spray to existing stands of alfalfa. clover. and other labeled forage legumes. Labeled crops may be planted into the treated area. PRECAUTIONS. RESTRICTIONS: Remove domestic livestock before application. If application rates of 48 fluid ounces per acre or less are used wait 36 hours after application before grazing or harvesting. If application rates greater than 48 fluid ounces per acre are used. wait 8 weeks between applications and grazing or harvesting. Master Label MON 78271 Page 37 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES 10.2 Conservation Reserve Program (CRP) TYPES OF APPLICATIONS: Renovation (rotating out ofCRP). Site preparation. Postemergence weed control in dormant CRP grasses. Wipers. Renovation (rotating out of CRP), Site preparation USE INSTRUCTIONS: This product may be used to prepare CRP land for crop production. Refer to Federal. state or local use guides for CRP renovation recommendations. Postemergence weed control in dormant CRP grasses, Wiper applications USE INSTRUCTIONS: This product may be used to suppress competitive growth and seed production of undesirable vegetation in CRP acres. Such applications may be made with wiper application equipment or as a broadcast or spot treatment to dormant CRP grasses. For selective applications with broadcast spray equipment. apply 9 to 12 fluid ounces of this product per acre in early spring before desirable CRP grasses. such as crested and tall wheatgrass. break dormancy and initiate green growth. Late fall applications can be made after desirable perennial grasses have reached dormancy. PRECAUTIONS. RESTRICTIONS: Some stunting of CRP perennial grasses will occur if broadcast applications are made when plants 3rc not dormant. 10.3 Grass Seed Production LABELED CROPS: Any grass (Gramilleae family) except corn. sorghum. sugarcane and those listed above under "CEREAL CROPS". TYPES OF APPLICATIONS: Preplant. Preemergence. Renovation. Site preparation. Shielded sprayers. Wiper applications. Spot treatments, Creating rows in annual ryegrass. Preplant, Preemergence, Renovation USE INSTRUCTIONS: This product may be applied before. during. or after planting or for renovation of turf or forage grass areas grown for seed production. Applications must be made prior to the emergence of the crop to avoid crop injury. For maximum control of existing vegetation. delay planting to determine if any regrowth from escaped underground plant parts occurs. Where repeat treatments are necessary, sufficient regrowth must be attained prior to application. For warm~season grasses, such as Bermudagrass. summer or fall applications provide best control. PRECAUTIONS. RESTRICTIONS: Do not disturb soil or underground plant parts before treatment. Tillage or renovation techniques such as vertical mowing. coring or slicing should be delayed for 7 days after application to allow proper translocation into underground plant parts. Do not feed or graze treated areas for 8 weeks following application. Shielded sprayers USE INSTRUCTIONS: Apply 24 to 72 fluid ounces of this product as a broadcast spray.in 10 to 20 gallons of water per acre to control weeds in the rows. Uniform planting in straight rows aid in shielded sprayer applications. Best results are obtained when the grass seed crop is small enough to easily pass by or through the protective shields. Master Label MON 78271 Page 38 of 118 Version: Apr.2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES PRECAUTIONS, RESTRICTIONS: Contact of this product in any manner to any vegetation to which treatment is not intended may cause damage. Such damage shall be the sale responsibility of the applicator. Wiper applications PRECAUTIONS, RESTRICTIONS: Contact of the herbicide solution with desirable vegetation may result in damage or destruction. Applicators should be adjusted so that the wiper contact point is at least 2 inches above the desirable vegetation. Weeds should be a minimum of 6 inches above the desirable vegetation. Better results may be obtained when more of the weed is exposed to the herbicide solution. Weeds not contacted by the herbicide solution will not be affected. This may occur in dense clumps, severe infestations, or when height of weeds varies so that not all weeds 3re contacted. ]n these instances, repeat treatments may be necessary. Better results may be obtained if2 applications are made in opposite directions. Spot treatments USE INSTR UCTIONS: Use a I percent solution. PRECAUTIONS, RESTRICTIONS: Apply this product prior to heading of grasses. Do not treat more than JO percent of the IOtal field area. The crop receiving the spray in the treated area wiIJ be killed. Take care to avoid drift or spray outside the target area for the same reason. Creating rows in annual ryegrass USE INSTRUCTIONS: Use 12to 24 fluid ounces of this product per acre. Use the higher rate when the rye grass is greater than 6 inches tall. Best results are obtained when applications are made before the ryegrass reaches 6 inches in height. PRECAUTIONS, RESTRICTIONS: Set nozzle heights to allow the establishment of the desired row spacing while preventing spray droplets, spray fines, or drift to contact the ryegrass plants not treated. Use of low­ pressure nozzles. or drop nozzles designed to target the application over a narrow band are recommended. Grower assumes all responsibility for crop losses from misapplication. 10,4 Pastures LABELED CROPS: Any grass (Gramineae family) except corn, sorghum, sugarcane and those listed above under "CEREAL CROPS". lnc1uding Bahiagrass, Bermudagrass. Bluegrass. Bromegrass. Fescue. Guineagrass. Kikuya grass, Orchardgrass, Pangola grass, Ryegrass, Timothy, Wheatgrass. TYPES OF APPLICATIONS: Spot treatment, Wiper application, Preplant, Preemergence, Pasture renovation. Spot treatment and Wiper application USE INSTRUCTIONS: This product may be applied as a spot treatment or with wiper applicators in pastures. Applications may be made in the same area at 30-day intervals. PRECAUTIONS, RESTRICTIONS: For spot treatment and wiper applications, apply in areas where the movement of domestic livestock can be controlled. No more than 10 percent of the total pasture area should be treated at one time. Remove domestic livestock before application and wait 14 days after application before grazing livestock or harvesting. PrepIant, Preemergence and Pasture reno,'ation Master Label MON 78271 Page 39 of 118 Version: Apr·2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES USE INSTRUCTIONS: This product may be applied prior to planting or emergence of forage grasses. In addition, this product may be used to control perennial pasture species listed on this label prior to re-planting. PRECAUTIONS, RESTRICTIONS: Remove domestic livestock before application and wait 8 weeks after application before grazing or harvesting. 10.S Rangelands TYPES OF APPLICATIONS: Postemergence. USE INSTRUCTIONS: This product will control or suppress many annual weeds growing in perennial cool and warm-season grass rangelands. Preventing viable seed production is key to the successful control and invasion of annual grassy weeds in rangelands. Follow-up applications in sequential years should eliminate most of the viable seeds. Grazing of treated areas should be delayed to encourage growth of desirable perennials. Allowing desirable perennials to flower and reseed in the treated area wi1l encourage successful transition. PRECAUTIONS, RESTRICTIONS: Do not use ammonium sulfate when spraying rangeland grasses with this product. Do not make more than one application per year. Postemergence Apply 9 to 12 fluid ounces of this product to control or suppress many weeds, including downy brome. cheatgrass, cereal rye and jointed goat grass in rangelands. Apply when most mature brome plants are in early flower and before the plants, including seedheads, turn color. Allowing for secondary weed flushes to occur in the spring following rain events further depletes the seed reserve and encourages perennial grass conversion on weedy sites. Fall applications are possible, and recommended, where spring moisture is usually limited and fall germination allows for good weed growth. For medusa head, apply 12 fluid ounces of this product at the 3-leaf stage. Delaying applications beyond this stage will result in reduced or unacceptable control. Fire may be useful in eliminating the thatch layer produced by slow decaying culms prior to application. Allow new growth to occur before spraying after a burn. Repeat applications in subsequent years may be necessary to eliminate the seedbank before reestablishing desirable perennial grasses in medusa head-dominated rangelands. Slight discoloration of the desirable grasses may occur, but they will regreen and regrow under moist soil conditions as effects of this product wear off. 10.6 Turf Grass Sod Production TYPES OF APPLICATIONS: Preplant, preemergence, renovation, site preparation, spot treatments. Preplant, preemergence, renovation, site preparation USE INSTRUCTIONS: This product controls most existing vegetation prior to renovating turf grass areas or establishing turf grass grown for seed or sod. Broadcast or hand-held equipment may be used to control sod remnants or other unwanted vegetation after sod is harvested. For maximum control of existing vegetation. delay planting or sodding to determine if any regrowth from escaped underground plant parts occurs. For warm-season grasses such as Bermudagrass. summer or fall applications provide the best control. Desirable turf grasses may be planted following the above procedures. Master Label MON 78271 Page 40 of 118 Version: Apr·2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES PRECAUTIONS, RESTRICTIONS: Do not feed or graze turf grass grown for seed or sod production for 8 weeks following application. Spot treatments Hand-held equipment may be used for spot treatment of unwanted vegetation growing in existing turf grass. 11.0 ROUNDUP READY CROPS The following instructions or those separately published on Monsanto Supplemental labeling include all applications which can be made onto the specified Roundup Ready crops during the complete cropping season. Do NOT combine these instructions with other recommendations made for crop varieties that do not contain the Roundup Ready gene, in the "ANNUAL AND PERENNIAL CROPS (ALPHABETICAL)" section of this label. MONSANTO COMPANY RECOMMENDS USE OF THIS PRODUCT .FOR POSTEMERGENCE APPLICATION ONLY ON CROP V ARIETIES DESIGNATED AS CONT AlNING THE ROUNDUP READY GENE. Applying this product to crop varieties that are not designated as Roundup Ready will result in severe crop injury and yield loss. Avoid contact with foliage, green stems, or fruit of crops, or any desirable plants that do not contain the Roundup Ready gene. since severe injury or destruction wi11 result. The Roundup Ready designation indicates that the crop variety contains a patented gene that provides tolerance to this product. Information on Roundup Ready crop varieties may be obtained from your seed supplier or Monsanto representative. Roundup Ready crop varieties must be purchased from an authorized licensed seed supplier. NOTE: Roundup Ready seed, and the method of selectively controlling weeds in a Roundup Ready crop by applying glyphosate to the weeds and Roundup Ready crop are protected under several U.S. Patents, including 5,352,605 and 5,633,435. A license to use Roundup Ready seed must be obtained prior to use. Monsanto retains ownership of the gene and process technologies, and the Purchaser of the seed receives the right to use the licensed genes and technologies subject to the limited use license conditions. Seed containing the Roundup Ready trait cannot be used for research and demonstration, reverse engineering or in connection with herbicide registration. Progeny seed containing the Roundup Ready trait cannot be saved for replanting or transferred to others for replanting. Contact your Authorized Monsanto Retailer for information on obtaining a limited use license. For ground applications with broadcast equipment, apply this product in 5 to 20 gallons of spray solution per acre. Carefully select proper nozzle and spray pressure to avoid spraying a fine mist. For best results with ground application equipment use flat spray nozzles. Check for even distribution of spray droplets. For aerial applications apply this product in 3 to 15 gallons of water per acre. See the "APPLICATION EQUIPMENT AND TECHNIQUES" section of this label for procedures to avoid spray drift that may cause iojury to any vegetation not intended for treatment. Use of appropriate buffer zones will help prevent injury to adjacent vegetation. For proper stewardship of aerial applications over-the-top of Roundup Ready crops, Monsanto recommends that growers and applicators read and follow all precautions and procedures contained in the use guide "A Guide to On-Target Aerial Application" available by calling 1-800-ROUNDUP (I-800-7Q8-6387) or on the internet at www.FARMSOURCE.".com. A TTENTlON: A VOID DRIFT. EXTREME CARE MUST BE USED WHEN APPLYING THIS PRODUCT TO PREVENT INJURY TO DESIRABLE PLANTS AND CROPS WHICH DO NOT CONT AlN THE ROUNDUP READY GENE. MaSler Label MON 78271 Page 41 of 118 Version: Apr-2002 UNMARKED ~/flf

I. MAIN LABEL FOR FOOD CROP USES See the "MIXING and APPLICATION EOUIPMENT AND TECHNIOUES" sections of this label for additional directions and restrictions on the application of this product. Tank mixtures with other herbicides, insecticides, fungicides, micronutrients or foliar fertilizers may result in reduced weed control or crop injury and are NOT recommended for over-the-top applications of this product unless otherwise noted in this product label, supplemental labeling or fact sheets published separately by Monsanto. Ammonium sulfate may be mixed with this product for applications to Roundup Ready crops. Refer to the "MIXING" section for use instructions for ammonium sulfate. Sprayer Preparation: It is important that sprayer and mixing equipment be clean and free of pesticide residue before making applications of this product. Follow the cleaning procedures specified on the label of the product(s) previously used. THOROUGHLY CLEAN THE SPRAY TANK AND ALL LINES AND FILTERS TO ELIMINATE POTENTIAL CONTAMINATION FROM OTHER HERBICIDES PRIOR TO MIXING AND APPLYING THIS PRODUCT. NOTE: The following recommendations are based on a clean start at planting by using a burndown application or tillage to control existing weeds before crop emergence. In no-till and stale seedbed systems, a preplant burn-down treatment of this product is recommended to control existing weeds prior to crop emergence. Some weeds, such as black nightshade, broadleaf signalgrass, sicklepod, Texas panic urn, sandbur, annual morningglory, woolly cupgrass, shattercane, wild proso millet, burcumber, and giant ragweed with multiple germination times Or suppressed (stunted) weeds may require a second application of this product for complete control. The second application should be made after some regrowth has occurred and at least 10 days after a previous application of this product. 11.1 Canola with the Roundup Ready Gene TYPES OF APPLICATIONS: Preplant, At-planting, Preemergence, Postemergence DO NOT USE THIS PRODUCT ON CANOLA WITH THE ROUNDUP READY GENE PLANTED IN THE FOLLOWING STATES: ALABAMA, DELAWARE, FLORIDA, GEORGIA, KENTUCKY, MARYLAND, NEW JERSEY, NORTH CAROLINA, SOUTH CAROLINA, TENNESSEE, VIRGINIA AND WEST VIRGINIA. THE USE OF THIS PRODUCT FOR IN-CROP APPLICATIONS OVER ROUNDUP READY CANOLA MAY NOT BE PRACTICED IN CALIFORNIA UNLESS THE APPLICATOR HAS AT THE TIME OF APPLICATION A CALIFORNIA-APPROVED SUPPLEMENT AL LABEL SPECIFYING THE APPROVED DIRECTIONS FOR USE. Maximum Allowable Combined Application Ouantities Per Season Preplant, At-planting, Preemergence applications 48 fluid ounces per acre Total in-crop application from emergence to 6-leaf stage 48 fluid ounces per acre Preplant, At-planting and Preemergence USE INSTRUCTIONS: This product may be applied before, during or after planting canoIa. Postemergence USE INSTRUCTIONS: This product may be applied postemergence to Roundup Ready canola from emergence through the 6-leaf stage of development. Applications made during bolting or flowering may result Master Label MON 78271 Page 42 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES in crop injury and yield loss. To maximize yield potential, make applications early to eliminate competing weeds. Weeds Controlled: For specific rates of application and instructions, refer to the "ANNUAL and PERENNIAL WEEDS RATE TABLES" in this booklet. Single Application - Apply 12 to 24 fluid ounces per acre no later than the 6-leaf stage for the control of annual weeds. Avoid overlapping applications that may result in temporary yellowing, delayed flowering, and or growth reduction. Similar injury may result when applications of more than 12 fluid ounces per acre are applied after the 4-leaf stage. Sequential Application - Apply 24 fluid ounces per acre to I-to 3-leaf canola followed by a sequential application at a minimum interval of 10 days, but no later than the 6-leaf stage. Sequential applications are recommended for early emerging annual weeds and perennial weeds such as Canada thistle and quackgrass or when controlling weeds with multiple application times. PRECAUTIONS, RESTRICTIONS: See the "ROUNDUP READY CROPS" section of this label for general precautionary instructions for use in Roundup Ready crops. No more than two over-the-top broadcast applications may be made from crop emergence through the 6-leaf stage of development and the total in-crop application should not exceed 48 fluid ounces per acre. Allow a minimum of 60 days between last application and canDia harvest. 11.2 Corn with the Roundup Ready Gene TYPES OF APPLICATIONS: Preplant, At-planting, Preemergence, Postemergence, Spot treatment, Preharvest, Post-harvest. Maximum Allowable Combined Application Quantities Per Season Combined total per year for all applications 6 quans per acre Preplant, At-planting, Preemergence applications 4 quarts per acre Total in-crop applications from emergence through the V8 stage or 30 inches 48 fluid ounces per acre Maximum preharvest application rate after maximum kerne1 fill is complete and the crop is physiologically mature (black layer formation) until 7 days before harvest PrepIant, Preemergence and At-planting 24 fluid ounces per acre USE INSTRUCTIONS: This product may be applied alone or in a tank-mixture before, during or after planting corn. TANK MIXTURES: This product may be tank mixed with Bullet, Degree, Degree Xtra, Harness, Harness Xtra, Harness Xtra 5.6L, Lariat, Lasso or Micro-Tech at 50 to 100 percent of labeled. Refer to the specific product label and observe all precautions and limitations on the label for any preemergence herbicide application. including application timing restrictions. soil restrictions, minimum recrapping interval and rotational guidelines - the more restrictive requirements apply. . NOTE: For maximum weed control, a postemergence (in-crop) application of this product should be applied following the use of less than labeled rates of the preemergence residual products listed above. MaSler Label MON 78271 Page 43 of 118 Version: Apr-2002 UNMARKED Hjtlf

1. MAIN LABEL FOR FOOD CROP USES Postemergence (in-crop) USE INSTRUCTIONS: This product may be applied postemergence to Roundup Ready corn from emergence through the V8 stage (8 leaves with collars) or until corn height reaches 30 inches, whichever comes first. When applied as directed, this product controls labeled annual grass and broadleaf weeds in Roundup Ready corn. Many perennial grasses and broadleaf weeds will be controlled or suppressed with one or more application of this product. The postemergent application of 18 to 24 fluid ounces per acre of this product should be made before the weeds reach a height and/or density that the weeds become competitive with the crop, generally 4 inch tall weeds or less. This product may be applied alone as a postemergence in-crop application to provide control of emerged weeds listed on this label. If new flushes of weeds occur, a sequential application of this product at 18 to 24 fluid ounces per acre will control the labeled grasses and broad leaf weeds TANK MIXTURES: This product may be applied in tank mixture with Bullet, Degree, Degree Xtra, Harness, Harness Xtra, Harness Xtra 5.6L, and Micro-Tech at 50 to 100 percent of labeled rate. This product may be applied in tank mixture with Permit and Atrazine at labeled rates. Refer to the specific product label and observe all precautions and limitations on the label for all products used in tank mixtures, including application timing restrictions. soil restrictions, minimum recropping interval and rotational guidelines - the more restrictive requirements apply_ Maximum Height Of Corn Tank-mix Partner For Application Degree II inches Degree Xtra Harness Harness Xtra Harness Xtra 5.6 Bullet- 5 inches Micro- Tech- Permit 30 inches atrazine 12 inches -Bullet and Micro-Tech are not registered for use as a postemergence application in Texas. PRECAUTIONS, RESTRICTIONS: See the "ROUNDUP READY CROPS" section of this label for general precautionary instructions for use in Roundup Ready crops. Single in-crop applications of this product are not to exceed 24 fluid ounces per acre. Sequential in-crop applications of this product from emergence through the VB stage or 30 inches must not exceed 48 fluid ounces per acre per growing season. Allow a minimum of 10 days between in-crop applications of this product. Allow a minimum of 50 days between application of this product and harvest of corn forage. Preharvest USE INSTRUCTIONS: In Roundup Ready corn, up to 24 fluid ounces per acre of this product can be applied preharvest. Make applications at 35 percent grain moisture or less. Ensure that maximum kernel fill is complete and the corn is physiologically mature (black layer formed). PRECAUTIONS, RESTRICTIONS: Allow a minimum of 7 days between application and harvest. Post-harvest USE INSTRUCTIONS: This product may be applied after harvest of corn. Higher rates may be required for control of large weeds that were growing in the crop at the time of harvest. Tank mixtures with 2,4-D or dicamba may be used. Master Label MQN 78271 Page 44 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES PRECAUTIONS, RESTRICTIONS: Allow a minimum of 7 days between treatment and harvest or feeding of treated vegetation. 11,3 Cotton with the Roundup Ready Gene TYPES OF APPLICATIONS: Preplant, At-planting, Preemergence, Over-the-top, Selective Equipment, Preharvest Maximum Allowable Combined Application Ouantities Per Season Combined total per year for all applications 6 quarts per acre Preplant, At-planting, Preemergence applications Total in-crop applications from ground cracking to layby Maximum preharvest application rate 4 quarts per acre 2.8 quarts per acre 1.5 quarts per acre PRECAUTIONS, RESTRICTIONS: See the "ROUNDUP READY CROPS" section of this label for general precautionary instructions for use in Roundup Ready crops. The combined total application of this product from cotton emergence until harvest must nol exceed 4.5quarts per acre. NO MORE THAN TWO OVER­ THE-TOP BROADCAST APPLICATIONS MAY BE MADE FROM CROP EMERGENCE THROUGH THE 4-LEAF (NODE) STAGE OF DEVELOPMENT. NO MORE THAN TWO APPLICATIONS SHOULD BE MADE FROM THE 5-LEAF STAGE THROUGH LAYBY. SEQUENTIAL IN-CROP OVER-THE-TOP OR POST-DIRECTED APPLICATIONS OF THIS PRODUCT MUST BE AT LEAST 10 DAYS APART AND COTTON MUST HAVE AT LEAST TWO NODES OF INCREMENTAL GROWTH BETWEEN APPLICATIONS. ALLOW A MINIMUM OF 7 DAYS BETWEEN APPLICATION AND HARVEST. Preplant, At-planting and Preemergence USE INSTRUCTIONS: This product may be applied before, during or after planting cotton. Over-the- Top USE INSTRUCTIONS: This product may be applied by aerial or ground application equipment at rates up to 24 fluid ounces per acre per application postemergence to Roundup Ready cotton from the ground cracking stage until the 4-leaf (node) stage of development (until the fifth true leaf reaches the size of a quarter). Over­ the-top applications made after the 4-leaf (node) stage of development may result in boll loss, delayed maturity and/or yield loss. Salvage Treatment. This treatment may be used after the 4-leaf stage of development and should only be used where weeds threaten to cause the loss of the crop. 36 fluid ounces per acre may be applied either as an over­ the-top applications or as a post-directed treatments sprayed higher on the cotton plants and over the weeds. NOTE: SAL V AGE TREATMENTS WILL RESULT IN SIGNIFICANT BOLL LOSS, DELAYED MATURITY AND/OR YIELD LOSS. NO MORE THAN ONE SAL V AGE TREATMENT SHOULD BE USED PER GROWING SEASON. NOTE: For specific rates of application and instructions, refer to the "ANNUAL and PERENNIAL WEEDS RATE TABLES" in this booklet. Master Label MON 78271 Page 45 of 118 Version: Apr-2002 UNMARKED 'f(,plf

J. MAIN LABEL FOR FOOD CROP USES PRECAUTIONS. RESTRICTIONS: See the "ROUNDUP READY CROPS" section of this label for general precautionary instructions for use in Roundup Ready crops. Selective equipment USE INSTRUCTIONS: This product may be applied using precision post-directed or hooded sprayers at rates up to 24 fluid ounces per acre per application to Roundup Ready colton through layby. At this stage. post­ directed equipment should be used which directs the spray to the base of the colton plants. Contact of the spray with colton leaves should be avoided 10 the maximum extent possible. To minimize spray onto the leaves of the colton plants. place nozzles in a low position directing a horizontal spray paltern under the colton leaves to contact weeds in the row. and maintain low spray pressure (less than 30 psi). For best results. make applications while weeds are small (less than 3 inches). PRECAUTIONS. RESTRICTIONS: See the "SELECTIVE EQUIPMENT" part of the "APPLICATION EQUIPMENT AND TECHNIQUES" section of this label for information on proper use and calibration of this equipment. Preharvest USE INSTRUCTIONS: This product may be applied for preharvest annual and perennial weed control as a broadcast treatment to Roundup Ready colton after 20 percent boll crack. Up to 48 fluid ounces of this product may be applied using either aerial or ground spray equipment. NOTE: This product will not enhance the performance of harvest aids when applied to Roundup Ready colton PRECAUTIONS. RESTRICTIONS: Allow a minimum of 7 days between application and harvest of colton. Do not apply this product to cotton grown for seed. as a reduction in germination or vigor may occur. ATTENTION: USE OF THIS PRODUCT IN A CCORDANCE WITH LABEL DIRECTIONS IS EXPECTED TO RESULT IN NORMAL GROWTH OF ROUNDUP READY COTTON, HOWEVER, VARIOUS ENVIRONMENTAL CONDITIONS, AGRONOMIC PRACTICES AND OTHER FACTORS MAKE IT IMPOSSIBLE TO ELIMINATE ALL RISKS ASSOCIATED WITH THIS PRODUCT, EVEN WHEN APPLICA TIONS ARE MADE IN CONFORMANCE WITH THE LABEL SPECIFICATIONS. IN SOME CASES, THESE FACTORS CAN RESULT IN BOLL LOSS, DELA YED MATURITY AND/OR YIELD LOSS. 11.4 Soybeans with the Roundup Ready Gene TYPES OF APPLICATIONS: Preplant. At-planting. Preemergence. Postemergence. Preharvest. Post-harvest. THE USE OF THIS PRODUCT FOR IN-CROP APPLICATIONS OVER ROUNDUP READY SOYBEANS MAY NOT BE PRACTICED IN CALIFORNIA UNLESS THE APPLICATOR HAS AT THE TIME OF APPLICATION A CALIFORNIA-APPROVED SUPPLEMENT AL LABEL SPECIFYING THE APPROVED DIRECTIONS FOR USE. Maximum Allowable Combined Application Ouantities Per Season Combined total per year for all applications 6 quarts per acre Preplant. At-planting. Preemergence applications Total in-crop applications from cracking throughout flowering 4 quarts per acre 2.3 quarts per acre Maximum preharvesl application rate 24 fluid ounces per acre Master Label MON 78271 Page 46 of 118 Version: Apr~2002 UNMARKED

r '. . MAIN LABEL FOR FOOD CROP USES PRECAUTIONS/RESTRICTIONS: See the "ROUNDUP READY CROPS" section of this label for general precautionary instructions for use in Roundup Ready crops. Preplant, Preemergence and At'planting USE INSTRUCTIONS: This product may be applied before. during or after planting soybeans. Postemergence USE INSTRUCTIONS: When applied as directed. this product will control labeled annual grasses and broadleaf weeds in Roundup Ready soybeans. Applications of this product can be made in Roundup Ready soybeans from emergence (cracking) throughout flowering. Refer to the "ANNUAL WEEDS RATE TABLE" in this label for rate recommendations for specific annual weeds. In general. an initial application of 24 fluid ounces per acre on 2 to 8 inch tall weeds is recommended. Weeds will generally be 2 to 8 inches tall, 2 to 5 weeks after planting. If the initial application is delayed and weeds are larger. apply a higherrate of this product. This product may be used up to 48 fluid ounces per acre in any single in·crop application for control of annual weeds and where heavy weed densities exist. A 24· to 48·fluid-ounce per acre rate (single or multiple applications) of this product will control or suppress perennial weeds such as: Bermudagrass. Canada thistle, common milkweed, field bindweed. hemp dogbane, horsenellie. marestail (horseweed), nutsedge. quackgrass. rhizome johnsongrass, redvine. trumpetcreeper, swamp smart weed and wirestem rnuhly. For best results, allow perennial weed species to achieve at least 6 inches of growth before spraying with this product. Under adverse growing conditions such as drought. hail, wind damage or a poor soybean stand that slows or delays canopy closure, a sequential application of this may be necessary to control late flushes of weeds. IN THE SOUTHERN STATES. A SEQUENTIAL APPLICATION OF THIS PRODUCT WILL BE REQUIRED TO CONTROL NEW FLUSHES OF WEEDS IN THE ROUNDUP READY SOYBEAN CROP. To control giant ragweed. it is recommended that 24 fluid ounces per acre of this product be applied when the weed is 8 to 12 inches tall to increase control and possibly avoid the need for a sequential application. PRECAUTIONS. RESTRICTIONS: The combined total application from crop emergence through harvest must not exceed 2.3 quarts per acre, The maximum rate for any single in-crop application is 48 fluid ounces per acre. The maximum combined total of this product that can be applied during flowering is 48 fluid ounces per acre. Preharvest USE INSTRUCTIONS: This product provides weed control when applied prior to harvest of soybeans. Up to 24 fluid ounces per acre of this product can be applied by aerial or ground application. PRECAUTIONS. RESTRICTIONS: Care should be taken to avoid excessive seed shaller loss due to ground application equipment. Allow a minimum of 14 days between final application and harvest of soybean grain or feeding of soybean grain, forage or hay. Post·harvest USE INSTRUCTIONS: This product may be applied after harvest of Roundup Ready soybeans. Higher rates may be required for control of large weeds which were growing in the crop at the time of harvest. Tank mixtures with 2,4-D or dicamba may be used. Masler Label MON 78271 Page 47 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES 11.5 Sugar beets with the Roundup Ready Gene TYPES OF APPLICATIONS: Preplant. At-planting, Preemergence, Postemergence. Maximum Allowable Combined Application Ouantitles Per Season Combined total per year for all applications 6 quarts per acre Preplant, At-planting, Preemergence applications Emergence to 8-leaf stage Between 8-leaf stage and canopy closure 4 quarts per acre 2 quarts per acre 1.5 quarts per acre PRECAUTIONS, RESTRICTIONS: See the "ROUNDUP READY CROPS" section of this label for general precautionary instructions for use in Roundup Ready crops. The combined total application from crop emergence through harvest must not exceed 3.4 quarts per acre. The maximum rate for any single application from crop emergence until the S-Ieaf stage is 36 fluid ounces per acre. The maximum rate for any single application between the 8-leaf stage and canopy closure is 24 fluid ounces per acre. Allow a minimum of 30 days between last application and sugar beet harvest. Preplant, At-planting and Preemergence USE INSTRUCTIONS: This product may be applied before, during or after planting of Roundup Ready sugar beets. Postemergence USE INSTRUCTIONS: This product may be applied postemergent over-the-top to Roundup Ready sugar beets from emergence to 30 days prior to harvest. To maximize yield potential spray sugar beets early to eliminate competing weeds. Up to 4 sequential applications of this product may be made with at least IO days between applications. Refer to the "ANNUAL WEEDS RATE TABLES" in this label for rate recommendations for specific annual weeds. This product will control or suppress, most perennial weeds. For some perennial weeds, repeat applications may be required to eliminate crop competition throughout the growing season. 12.0 NON·CROP USES AROUND THE FARMSTEAD TYPES OF APPLICATIONS: General non-selective weed control. trim-and-edge, greenhouse/shadehouse, chemical mowing. cut stumps, habitat management. 12.1 General Weed Control and Trim-And-Edge USE INSTRUCTIONS: This product may be used to control annual weeds, perennial weeds and woody brush which are found in any part of the farmstead, including building foundations, along and in fences, in dry ditches and canals, along ditchbanks, farm roads, shelterbelts, prior to landscape plantings and equipment storage areas. TANK MIXTURES: This product may be tank mixed with the following products. Refer to these product labels for approved farmstead sites and application rates. For annual weeds, use 24 fluid ounces per acre of this product when weeds are less than 6 inches tall, 36 fluid ounces per acre when weeds are 6 to 12 inches tall and 48 fluid ounces per acre when weeds are greater than 12 inches tall .. For perennial weeds, apply 1.5 to 4 quarts per acre in these tank mixes. For tank mixtures with these products through backpack sprayers, handguns Or other high-volume spray-to-wet applications, see the "ANNUAL WEEDS -- HAND-HELD OR HIGH VOLUME EQUIPMENT" section of this label for recommended rates. Master Label MON 78271 Page 48 ofl18 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES Arsenal Plateau BanveUClarity Princep DF Barricade 65WG Princep Liquid Diuron Ronstar 50 WP Endurance Sahara Escort Simazine Karmex DF Surflan Krovar I DF Telar Oust Vanquish Pendulum 3.3 EC 2,4-D Pendulum WDG This product plus dicamba tank mixtures may not be applied by air in California. 12.2 G reenhouselShadehouse This product may be used to control weeds in and around greenhouses and shadehouses. Desirable vegetation must not be present during application and air circulation fans must be turned off. Do not use in residential greenhouses. 12.3 Chemical mowing USE INSTRUCTIONS: This product will suppress perennial grasses listed in this section to serve as a substitute for mowing. Use 5 fluid ounces of this product per acre when treating Kentucky bluegrass. Use 5 fluid ounces of this product per acre when treating tall fescue. fine fescue. orchardgrass. bahiagrass or quackgrass covers. Use 12 fluid ounces of this product per acre when treating bermudagrass. Use 48 fluid ounces of this product per acre when treating torpedograss or paragrass. Apply treatments in 10 to 20 gallons of spray solution per acre. Chemical mowing applications may be made along farm ditches and other parts of farmsteads. PRECAUTIONS. RESTRICTIONS: Use only in areas where some temporary injury or discoloration of perennial grasses can be tolerated. 12.4 Cut Stumps TYPES OF APPLICATION: Treating cut stumps in any non-crop site listed on this label USE INSTRUCTIONS: This product will control regrowth of cut stumps and resprouts of many types of woody brush and tree species. some of which are listed below. Apply this product using suitable equipment to ensure coverage of the entire cambium. Cut trees or resprouts close to the soil surface. Apply a 50 to 100 percent solution of this product to the freshly cut surface immediately after cutting. Delays in application may result in reduced performance. For best results. applications should be made during periods of active growth and full leaf expansion Alder Eucalyptus Madrone Oak Pepper. brazilian Pine. Austrian Master l.oJbel MON 78271 Page 49 of 118 Reed. giant Salt-cedar Sweetgum Tan oak Willow Version: Apr·2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES PRECAUTIONS. RESTRICTIONS: Do not make cut stump applications when the roots of desirable woody brush or trees may be grafted to the roots of the cut stump. Some sprouts. stems. or trees may share the same root system. Adjacent trees having a similar age. height and spacing may signal shared roots. Whether grafted or shared, injury is likely to occur to non~treated stemsltrees when one or mOre trees sharing common roots are treated. 12.5 Habitat Management TYPES OF USES: Habitat restoration and maintenance. Wildlife food plots. Habitat restoration and maintenance USE INSTRUCTIONS: This product may be used to control exotic and other undesirable vegetation in habitat management areas. Applications can be made to allow recovery of native plant species. prior to planting desirable native species, and fOT similar broad spectrum vegetation control requirements in habitat management areas. Spot treatments can be made to selectively remove unwanted plants for habitat maintenance and enhancement. Wildlife food plots USE INSTRUCTIONS: This product may be used as a site preparation treatment to control annual and perennial weeds prior to planting wildlife food plots. Any wildlife food species may be planted after applying this product. or native species may be allowed to repopulate the area. If tillage is needed to prepare a seedbed. wait 7 days after application before tillage. 13.0 ANNUAL WEEDS RATE TABLE (Alphabetically by Species) WATER CARRIER VOLUMES OF 3 TO 10 GALLONS PER ACRE FOR GROUND APPLICATIONS AND 3 TO 5 GALLONS PER ACRE FOR AERIAL APPLICA TlONS ARE RECOMMENDED. Apply to actively growing annual weeds. Annual weeds are generally easiest to control when they are small. Older. mature (hardened) annual weed species may require higher rates even if they meet the size requirements. Do not tank mix with soil residual herbicides when using these rates unless otherwise specified. For weeds that have been mowed. grazed or cut, allow regrowth to occur prior to treatment. This product may be used up to 36 fluid ounces per acre where heavy weed densities exist WEED SPECIES Ammannia. purple Master Label MON 78271 ANNUAL WEEDS RATE TABLE RATE (fluid ounces per acre) 12 18 24 30 36 Maximum heightllength (in inches) 3 6 12 18 Page 50 of 118 Version: Apr-2002 UNMARKED

-----"" L MAIN LABEL FOR FOOD CROP USES $"';'/Ilf Annoda, spurred 2 3 5 8 Barley 18 18 + Barnyardgrass 3 6 7 9 Bassia, fivehook 6 Beggarweed, Aorida 5 8 Bittercress 12 20 Bluegrass, annual 10 Bluegrass, bulbous 6 Brome, downy 1.2 6 12 '';';;;;''. Brame, Japanese 6 12 24 Browntop panicum 6 8 12 24 Buckwheat, wild J 2 BUTcucumber 6 12 18 Buttercup 12 20 Carolina geranium 4 9 Carpetweed 6 12 Cheat 2 6 20 Chervil 20 Chickweed 12 18 Cocklebur 12 18 24 36 CopperJeaf, hophornbeam 2 4 6 Copperleaf, Virginia 2 4 6 Coreopsis, plains 6 12 18 Corn, volunteer 6 12 20 Corn speedwell 12 Crabgrass 3 6 12 Crowfootgrass 6 12 Cut leaf evening primrose 3 6 MaSler Label MON 78271 Page 51 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES Devilsclaw (unicorn plant) 3 6 Dwarfdandelion 12 Eastern mannagrass 8 12 Eelipta 4 8 12 Fall panicum 4 6 12 Falsedandelion 20 Falseflax, smallseed 12 Fiddleneck 6 12 ; .• ,~ Field pennycress 6 12 Filaree 6 12 Fleabane, annual 6 20 Fleabane, hairy 6 10 (Conyza bO,lQriensis) Aeabane, rough 3 6 12 Florida pusley 4 6 Foxtail, giant, bristly, yellow 6 12 20 Foxtail, Carolina 10 Foxtail, green 12 Goatgrass, jointed 6 12 Goosegrass 3 6 12 Grain sorghum (milo) 6 12 20 Groundcherry 3 6 9 Groundsel, common 6 10 Hemp sesbania 2 4 6 8 Henbit 6 12 Horseweed! Marestail 6 12 18 (Conyw canadensis) Itchgrass 6 8 12 18 Master Label MON 78271 Page 52 of 118 Version: Apr~2002 UNMARKED

"----" ------ L MAIN LABEL FOR FOOD CROP USES fl/tlf Jimsonweed 12 18 Johnsongrass, seedling 6 12 18 24 Junglerice 3 6 7 9 Knotweed 6 12 Kochia' 3 to 6 12 Lambsquarters 6 12 20 Little barley 6 12 London rocket 6 24 Mayweed 2 6 12 18 . ".: Morningglory, annual (Ipomoea spp) 3 6 Mustard, blue 6 12 18 Mustard, tansy 6 12 18 Mustard, tumble 6 12 18 Mustard, wild 6 12 18 Nightshade, black 4 6 12 Nightshade, hairy 4 6 12 Oats 3 6 18 Pigweed species 12 18 24 Prickly lettuce 6 12 Purslane 3 6 Ragweed, common 6 12 18 Ragweed, giant 6 12 18 Red rice 4 Russian thistle 6 12 Rye, volunteerlcereal 2 6 18 18 + Ryegrass 6 12 Sandbur, field 6 12 Sandbur, longspine 6 12 Master Label MON 78271 Page 53 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES Shattercane 6 12 20 Shepherd's-purse 6 12 Sicklepod 2 4 8 Signal grass, broadleaf 3 6 7 9 Smartweed, ladysthumb 6 9 Smartweed, Pennsylvania 6 9 Sowthistle, annual 6 12 Spanish needles 6 12 Speedwell, purslane 12 Sprangletop 6 12 20 Spurge, prostrate 6 12 Spurge, spotted 6 12 Spurry, umbrella 6 Stinkgrass 12 Sunflower 12 18 Swinecress 5 12 Teaweed! Prickly sida 2 4 6 Texas panicum 6 S 12 24 Thistle, Russian' 6 12 Velvetleaf 6 12 Virginia pepperweed IS Waterhemp 6 12 Wheat 2 6 12 IS Wheat, 6 12 fS (overwintered) Wild oats 3 6 18 Wild proso millet 6 12 18 Witchgrass 12 Master Label MON 78271 Page 54 of 118 Version: Apr·2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES Woolly cupgrass 6 12 Yellow rocket 12 20 1 For control of downy brome in no-till systems, use 18 fluid ounces per acre. 2 Performance is better if application is made before this weed reaches the boot stage of growth. 3 Use 18 fluid ounces per acre of this product to control wild buckwheat in the cotyledon to 2-leaf stage. Use 24 fluid ounces per acre to control 2- to 4-leaf wild buckwheat. For improved control of wild buckwheat over 2 inches in size, use sequential treatments of 24 fluid ounces followed by 24 fluid ounces of this product per acre. 4 Do not treat kochia in the bunon stage. ~Control of Russian thistle may vary based on environmental conditions and spray coverage. Whenever possible, a tank mixture with 2,4-D as described below may improve control. 13_1 Annual Weeds -- Rates for 10 to 40 Gallons per Acre Apply 24 to 48 fluid ounces of this product per acre. Use 24 fluid ounces per acre if weeds are less than 6 inches tall, 36 fluid ounces per aCre if weeds are 6 to 12 inches tall and 48 fluid ounces per acre if weeds are greater than 12 inches tall. These rates will provide control of weeds listed in the annual weed control tables when water carrier volumes are 10 to 40 gallons per acre for ground applications. Older, mature (hardened) annual weed species may require higher rates even if they meet the size requirements. 13_2 Annual Weeds·· Tank Mixtures witb 2,4-D or Dicamba or Tordon 22K 9 to 12 fluid ounces of this product plus 114 pound of dicamba or 1/2 pound of2,4-D or 1 to 2 fluid ounces of Tordon 22K per acre will control the following weeds with the maximum height or length indicated: 6 inches-­ prickly lettuce, marestail/horseweed, morning glory, kochia (dicamba only) wild buckwheat (Tordon 22K only); 12 inches -- cocklebur, lambsquarters, pigweed, Russian thistle (2,4-D only). 12 fluid ounces of this product plus 1/2 pound of 2,4-D per acre will control the following weeds when they are a maximum height or length of 6 inches: common ragweed, giant ragweed, Pennsylvania smartweed. and velvetleaf. Refer to the specific product labels for crop rotation restrictions and cautionary statements of all products used in tank mixtures. Some crop injury may occur if dicamba or Tordon 22K is applied within 45 days of planting. DO NOT APPLY D1CAMBA TANK MIXTURES BY AIR IN CALIFORNIA. 13.3 Annual Weeds - Hand·Held or High-Volume Equipment For control of weeds listed inthe "ANNUAL WEEDS RATE TABLES", apply a 0.5 percent solution of this product to weeds less than 6 inches in height or runner length. Apply prior to seedhead formation in grass or bud formation in broadleaf weeds. For annual weeds over 6 inches tall, or unless otherwise specified, use a 0,8 percent solution. For best results, use a 1.7 percent solution on harder-to-control perennials, such as Bermudagrass, dock, field bindweed, hemp dogbane, milkweed and Canada thistle. Master Label MON 78271 Page 55 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES When using application methods that result in less than complete coverage, use a 5 percent solution for annual and perennial weeds and a 5 to 8 percent solution for woody brush and trees. 13,4 Annual Weeds·· Tank Mixtures with Atrazine for Fallow and Reduced Tillage Systems For use only in Colorado, Kansas, Nebraska, Oklahoma, Oregon, South Dakota, and Washington. In Oregon and Washington. do not exceed I pound of atrazine per acre. 18 to 22 fluid ounces of this product plus I to 2 pounds of atrazine per acre will control the following weeds: Barnyardgrass (requires 22 fluid ounces for control). Downy brome, Green foxtail, Lambsquarters, Prickly lettuce, Tansy mustard, Pigweed, Field sandbur, Stinkgrass. Russian thistle, Volunteer wheat, Witchgrass and Kochia (add 118 pound of dicamba for control). 14.0 PERENNIAL WEEDS RATE TABLE (Alphabetically by Species) Apply to actively growing perennial weeds. NOTE: If weeds have been mowed or tilled, do not treat until plants have resumed active growth and have reached the recommended stages. Repeat treatments may be necessary to control weeds regenerating from underground parts or seed. Repeat treatments must be made prior to crop emergence. Unless otherwise stated, allow 7 or more days after application before tillage. Best results are obtained when soil moisture is adequate for active weed growth. Weed Species Alfalfa Rate (QT/A) 1.2·1.7 Water Volume (GPA) 3·10 Hand-Held % Solution 1.7% Make applications after the last hay cutting in the fall. Allow alfalfa to regrow to a height of 6 to 8 inches or more prior to treatment. Applications should be followed with deep tillage at least 7 days after treatment. but' before soil freeze-up. AlJigatorweed 3.4 3·20 1% For partial control, apply when most of the plants are in bloom. Repeat applications will be required to maintain control. Anise (fennel) 1·1.7% Apply as a spray-to-wet treatment. Optimum results are obtained when plants are treated at the bud to full-bloom stage of growth. Bahiagrass 2.3·4 3·20 Apply when most plants have reached the early head stage. Bentgrass 1.2 10·20 Masler Label MON 78271 Page 56 of 118 1.7% 1.70/. Version: Apr-2002 UNMARKED

. . --- ,- I. MAIN LABEL FOR FOOD CROP USES For suppression in grass seed production areas. For ground applications only. Ensure entire crown area has resumed growth prior to a fall application. Bentgrass should have at least 3 inches of growth. Tillage prior to treatment should be avoided. Tillage 7 to 10 days after application is recommended for best results. Bermudagrass 2.3·4 3·20 1.7% For control. apply 4 quarts of this product per acre. For partial control. apply 2.3 quarts per acre. Treat when Bermudagrass is actively growing and seed heads are present. Retreatment may be necessary to maintain control. Bermudagrass, waler (knotgrass) 0.8 • 1.2 5·10 1.7% Apply 36 fluid ounces of this product in 5 to 10 gallons of water per acre. Apply when water Bermudagrass is 12 to 18 inches in length. Allow 7 or more days before tilling. flushing or flooding the field . Fall applications only: Apply 24 fluid ounces of this product in 5 to 10 gallons of water per acre. Fallow fields should be tilled prior to application. Apply prior to frost on water Bermudagrass that is 12 to 18 inches in length. This product is not registered in California for use on water Bermudagr3ss. Bindweed, field 0.5-4 3·20 1.7% Do not treat when weeds are under drought stress as good soil moisture is necessary for active growth. For control. apply 2.8 to 4 quarts of this product per acre west of the Mississippi River and 2.3 to 2.8 quarts east of the Mississippi River. Apply when the weeds are at or beyond full bloom. For best resuhs. apply in late summer or fall. Fall treatments must be applied before a killing frost. Also for control. apply 48 fluid ounces of this product plus 112 pound of dicamba in 10 to 20 gallons of water per acre. Do not apply by air. For suppression on irrigated agricuhuralland. apply 24 to 48 fluid ounces of this product plus I pound of 2,4"0 in 10 to 20 gallons of water per acre with ground equipment only. Applications should be made following harvest or in fall fallow ground when the bindweed is actively growing and the majority ofrunners are 12 inches or more in length. The use of at least one irrigation will promote active bindweed growth. For suppression. apply 12 fluid ounces of this product plus 112 pound of 2,4-0 in 3 to 10 gallons of water per acre for ground applications and 3 to 5 gallons of water per acre for aerial applications. Apply by air in fallow and reduced tillage systems only. Applications should be delayed until maximum emergence has occurred and when vines are between 6 to 18 inches in length. In California only. apply 24 fluid ounces to 4 quarts of this product per acre. Actual rate needed for suppression or control will vary within this range depending on local conditions. For suppression on irrigated land where annual tillage is performed. apply 24 fluid ounces of this product in 3 to 10 gallons of water per acre. Apply to bindweed that has reached a length of 12 inches or greater. Allow maximum weed emergence and runner growth. Allow 3 or more days after application before tillage. . Bluegrass, Kentucky 0.8 ·1.7 3·40 1.7% Master Label MON 78271 Page 57 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL fOR fOOD CROP USES Apply 48 fluid ounces of this product in IO to 40 gallons of water per acre when most plants have reached boot­ to-early seed head stage of development. For partial control in pasture or hay crop renovation, apply 24 to 36 fluid ounces of this product in 3 to 10 gallons of water per acre. Apply to actively growing plants when most have reached 4 to 12 inches in height. Blueweed, Texas 2.3·4 3·40 1.7% Apply 2.8 to 4 quarts of this product per acre west of the MiSSissippi River and 2.3 to 2.8 quarts per acre east of the Mississippi River. Apply when plants are at or beyond full bloom. New leaf development indicates active growth. For best results, apply in late summer or fan. Fall treatments must be applied before a killing frost. Brackenfern 2.3 - 3.4 3·40 1% Apply to fully expanded fronds that are at least 18 inches long. B romegrass, smooth 0.8 • 1.7 3·40 1.7% Apply 48 fluid ounces of this product in IO to 40 gallons of water per acre when most plants have reached boot­ to-early seedhead stage of development. For partial control in pasture or hay crop renovation, apply 24 to 36 fluid ounces of this product in 3 to IO gallons of water per acre. Apply to actively growing plants when most have reached 4 to 12 inches in height. Bursage, woolly· leaf 3·20 1.7% For control. apply 48 fluid ounces of this product plus -l pound of dicamba per acre. For partial control. apply 24 fluid ounces of this product plus y, pound of dicamba per acre. Apply when plants are producing new active growth which has been initiated by moisture for at least 2 weeks and when plants are at or beyond flowering. Canarygrass, reed 1.7 • 2.3 3·40 1.7% For best results. apply when most plants have reached the boot-to-head stage of growth. Cattail 2.3·4 3 - 40 1.7% Apply when most plants have reached the early head stage. Clover; red or white 2.3·4 3·20 1.7% Apply when most plants have reached the early bud stage. Also for control, apply 12 to 24 fluid ounces of this product plus 1/2 to I pound of 2,4-D in 3 to 10 gallons of water per acre. Cogongrass 2.3·4 10·40 1.7% Apply when cogongrass is at least 18 inches tall in late summer or fall. Due to uneven stages of growth and the dense nature of vegetation preventing good spray coverage, repeat treatments may be necessary to maintain control. nallisgrass 2.3·4 3·20 Apply when most plants have reached the early head stage. Masler Label MON 78271 Page 58 of 118 1.7% Version: Apr-2002 UNMARKED S~/Ilf

I. MAIN LABEL FOR FOOD CROP USES Dandelion 2.3·4 3·40 1.7% Apply when most plants have reached the early bud stage of growth. Also for control. apply 12 fluid ounces of this product plus 112 pound of 2,4-D in 3 to 10 gallons of water per acre. Dock, curly 2_3 - 4 3 - 40 1.7% Apply when most plants have reached the early bud stage of growth. Also for control, apply 12 to 24 fluid ounces of this product plus 1/2 to I pound of2,4-D in 3 to 10 gallons of water per acre. Dogbane, hemp 3.4 3 - 40 1-7'l'. Apply when most plants have reached the late bud to flower stage of growth. Following crop harvest or mowing, allow weeds to regrow to a mature stage prior to treatment. For best results, apply in late summer or fall. For suppression, apply 12 fluid ounces of this product plus 112 pound of 2,4-D in 3 to 10 gallons of water per acre for ground applications and 3 to 5 gallons of water per acre for aerial applications. Delay applications until maximum emergence of dogbane has occurred. Fescue (except tall) 2.3 - 4 3 - 20 1-7% Apply when most plants have reached the early head stage. Fescue, tall 0.8 - 2.3 3 - 40 1.7'l'. Apply 2.3 quarts of this product per aCre when most plants have reached boot-to-early seedhead stage of development. Fall applications only: Apply 24 fluid ounces of this product in 3 to 10 gallons of water per acre. Apply to fescue in the fall when plants have 6 to 12 inches of new growth. A sequential application of 12 fluid OUnces per aCre of this product will improve long-term control and control seedlings germinating after fall treatments or the following spring. Guineagrass 1-7 - 2.3 3 - 40 1% Apply when most plants have reached at least the 7-leaf stage of growth. Ensure thorough coverage when using hand-held equipment. In Texas and ridge of Florida, use 48 fluid ounces for control. In the flatwoods region of Florida, 2.3 quarts is required for control. Horsenettle 2.3 - 4 3 - 20 1-7'l'. Apply when most plants have'reached the early bud stage. Horseradish 3.4 3 - 40 1-7% Apply when most plants have reached the late bud to flower stage of growth. For best results, apply in late summer or fall. Master Label MON 78271 Page 59 of 118 Version: Apr·2002 UNMARKED f,D/llf

1. MAIN LABEL FOR FOOD CROP USES Iceplant 1.7·2% Ieeplant should be at or beyond the early bud slage of growth. Thorough coverage is necessary for best control. Jerusalem artichoke 2.3·4 3·20 1.7% Apply when most plants are in the early bud stage. Johnsongrass 0.5·2.3 3·40 10/. In annual cropping systems apply 24 to 48 fluid ounces of this product per acre. Apply 24 fluid Ounces of this product in 3 to 10 gallons of water per acre. Use 48 fluid ounces of this product when applying 10 to 40 gallons of water per acre. In non-crop, or areas where annual tillage (no-till) is not practiced, apply 1.5 to 2.3 quarts of this product in 10 to 40 gallons of water per acre. For best results, apply when most plants have reached the boot-to-head stage of growth or in the fall prior to frost. Allow 7 or more days after application before tillage. Do not tank mix with residual herbicides when using 24 fluid ounces of this product per acre. For burndown of Johnsongrass, apply 12 fluid ounces of this product in 3 to 10 gallons of water per acre before the plants reach a height of 12 inches. For this use, allow at least 3 days after treatment before tillage. Spot treatment (partial control or suppression)--Apply a 0.8 percent solution of this product when Johnsongrass is 12 to 18 inches in height. Coverage should be uniform and complete. Kikuyugrass 1.7·2.3 3·40 1.7% Spray when most kikuyugrass is at least 8 inches in height (3- or 4-leaf stage of growth). Allow 3 or more days after application before tillage. Knapweed 3.4 3·40 1.7% Apply when most plants have reached the late bud to flower stage of growth. For best results, apply in late summer or fall. Lantana 1% Apply at or beyond the bloom stage of growth. Use the higher application rate for plants that have reached the woody stage of growth. Lespedeza 2.3·4 3·20 1.7% Apply when most plants have reached the early bud stage. Milkweed, common 2.3 3·40 1.7% Apply when most plants have reached the late bud to flower stage of growth. M uhly, wires tern 0.8 ·1.7 3·40 1.7% Use 24 fluid ounces of this product in 3 to 10 gallons of water per acre. Use 48 fluid ounces of this product when applying 10 to 40 gallons of water per acre or in pasture, sod, or non-crop areas. Spray when the wirestem Master Label MON 78271 Page 60 of 118 Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES muhly is 8 inches Or more in height. Do not till between harvest and fall applications or in the fall or spring prior to spring applications. Allow 3 or more days after application before tillage. Mullein, common 2.3·4 3·20 1.7% Apply when most plants are in the early bud stage. Napiergrass 2.3·4 3·20 1.7% Apply when most plants are in the early head stage. Nightshade, silverleaf 1.7 3·10 1.7% Applications should be made when at least 60 percent of the plants have berries. Fall treatments must be applied before a killing frost. Nutsedge, purple or yellow 0.5 • 2.3 3·40 1·1.7'7'. Apply 2.3 quarts of this product per acre or apply a I to 1.7 percent solution for control of nutsedge plants and immature nutlets attached to treated plants. Treat when plants are in flower or when new nutlets can be found at rhizome tips. Nutlets that have not germinated will not be controlled and may germinate following treatment. Repeat treatments will be required for long·term control of ungerminated tubers. Sequential applications: 24 to 48 fluid ounces of this product in 3 to 10 gallons of water per acre will also provide control. Make applications when a majority of the plants are in the 3- to 5-leaf stage (less than 6 inches tall). Repeat this application, as necessary, when newly emerging plants reach the 3- to 5-leaf stage. Subsequent applications will be necessary for long-term control. For partial control of existing plants, apply 12 to 48 fluid ounces of this product in 3 to 40 gallons of water per acre. Treat when plants have 3 to 5 leaves and most are less than 6 inches tall. Repeat treatments will be required to control subsequent emerging plants or regrowth of existing plants. Orchard grass 0.8 ·1.7 3·40 1.7% Apply 48 fluid ounces of this product in JO to 40 gallons of water per acre when most plants have reached boot­ to-early seedhead stage of development. For partial control in pasture or hay crop renovation, apply 24 to 36 fluid ounces of this product in 3 to 10 gallons of water per acre. Apply to actively growing plants when most have reached 4 to 12 inches in height. Orchardgrass sods going to no-till corn: Apply 24 to 36 fluid ounces of this product in 3 to 10 gallons of water per acre. Apply to orchard grass that is a minimum' of 12 inches tall for spring applications and 6 inches tall for fall applications. Allow at least 3 days following application before planting. A sequential application of atrazine will be necessary for optimum results. Pampasgrass 1·1.7% Pampas grass should be at or beyond the boot stage of growth. Thorough coverage is necessary for best control. Paragrass 2.3·4 3·20 Apply when most plants are in the early head stage. Master Label MON 78271 Page 61 of 118 1.7% Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES Phragmites 2.3 - 4 10 - 40 1 -1.7% For partial control and best results, treat during late summer or fall when plants are actively growing and in full bloom. Treatment before or after this stage may lead to reduced control. Due to the dense nature ofthe vegetation, which may prevent good spray coverage or uneven stages of growth, repeat treatments may be necessary to maintain control. Visual control symptoms will be slow to develop. Poison hemlock 1 - 1.7% Apply as a spray-to-wet treatment. Optimum results are obtained when plants are treated at the bud to full-bloom stage of growth. Pokeweed,conunon 1.2 3 - 40 1.7% Apply to actively growing plants up to 24 inches tall. Quackgrass 0.8 - 2.3 3 - 40 1.7% In annual cropping systems. or in pastures and sods followed by deep tillage: Apply 24 fluid ounces of this product in 3 to IO gallons of water per acre. For 10 to 40 gallons of water per acre. apply 48 fluid ounces of this product. Do not tank mix with residual herbicides when using the 24-fluid-ounce rate. Spray when quackgrass is 6 to 8 inches in height. Do not till between harvest and fall applications or in fall or spring prior to spring application. Allow 3 or more days after application before tillage. In pastures or sods, use a moldboard plow for best results. In pastures, sods or non-crop areas where deep tillage does not follow application: Apply 48 to 72 fluid ounces of this product in 10 to 40 gallons of water per acre when the quackgrass is greater than 8 inches tall. Redvine 0.6 -1.7 5 -10 1.7% For suppression, apply 18 fluid ounces of this product per acre at each of two applications 7 to 14 days apart or a single application of 48 fluid ounces per acre. Apply recommended rates in 5 to 10 gallons of water per ·acre. Apply in late September or early October to plants that are at least 18 inches tall and have been growing 45 to 60 days since the last tillage operation. Make applications at least I week before a killing frost. Reed, giant 1.7% Best results are obtained when applications are made in late summer to fall. Ryegrass, perennial 0_8 - 2.3 3 - 40 In annual cropping systems apply 24 to 48 fluid ounces of this product per acre. Apply 24 fluid ounces of this product in 3 to IO gallons of water per acre. Use 48 fluid ounces of this product when applying IO to 40 gallons of water per acre. In non-crop, or areas where annual tillage <no-till) is not practiced, apply 1.5 to 2.3 quarts of this product in 10 to 40 gallons of water per acre. For best results, apply when most plants have reached the boot-to-head stage of growth or. in the fall prior to frost. Do not tank-mix with residual herbicides when using I quart of this product per acre. Smartweed, swamp 2,3 - 4 Master Label MON 78271 3 - 40 Page 62 of 118 1.7% Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES Apply when most plants have reached the early bud stage of growth. Also for control, apply 12 fluid ounces of this product plus 112 pound of2,4-D in 3 to 19 gallons of water per acre in the late Summer or fall. Sowthistle, perennial 1.7 -2.3 3 - 40 1.7% Apply when most plants are at or beyond the bud stage of growth. After harvest, mowing or tillage in the late summer or fall, allow at least 4 weeks for initiation of active growth and rosette development prior to the application of this product. Fall treatments must be applied before a killing frost. Allow 3 or more days after application before tillage. Spurge, leafy 3 -10 1.7% For suppression. apply 12 fluid ounces of this product plus 112 pound of 2,4-D in 3 to 10 gallons of water per acre in the late summer or fall. If mowing has occurred prior to treatment, apply when most of the plants are 12 inches tall. Starthistle, yellow 1.7 10·40 1.7% Best results are obtained when applications are made during the rosette. bolting and early flower stages. Sweet potato, wild 1.7% For partial control, apply to plants that are at or beyond the bloom stage of growth. Repeat applications may be required. Thistle, artichoke 1.7% For partial control, apply to plants that are at or beyond the bloom stage of growth. Repeat applications may be required. Thistle, Canada 1.7 - 2.3 3 - 40 1.7 'Y. Apply when most plants are at or beyond the bud stage of growth. After harvest, mowing or tillage in the late sununer or fall, allow at least 4 weeks for initiation of active growth and rosette development prior to the application of this product. Fall treatments must be applied before a killing frost. Allow 3 or more days after application before tillage. For suppression in the spring, apply 24 fluid ounces of this product, or 12 fluid ounces of this product plus 112 pound of 2,4-D, in 3 to 10 gallons of water per acre. Allow rosette regrowth to a minimum of 6 inches in diameter before treating. Applications can be made as long as leaves are still green and plants are actively growing at the time of application. Allow 3 or more days after application before tillage. Timothy 1.7 - 2.3 3 - 40 1.7% For best results, apply when most plants have reached the boot-to-head stage of growth. Torpedograss 2.8 - 4 3 - 40 1.7% For partial control, apply when most plants are at or beyond the seedhead stage of growth. Repeat applications will be required to maintain control. Fall treatments must be applied before frost. Trumpetereeper 1.7 MaSler Label MON 78271 5 - 10 Page 63 of 118 1.7% Version: Apr-2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES FOT panial contTol, apply in late SeptembeT OT OctobeT, to plants that aTe at least 18 inches tall and have been growing 45 to 60 days since the last tillage opeTation. Make applications at least I week before a killing frost. Vaseygrass 2.3 - 4 3 - 20 1.7% Apply when most plants aTe in the early head stage. Velvetgrass 2.3 - 4 3 - 20 1.7% Apply when most plants aTe in the eaTly head stage. Wheatgrass, western 1.7 - 2.3 3 - 40 1.7% FOT best Tesults. apply when most plants have Teached the boot-to·head stage of growth. 15.0 WOODY BRUSH AND TREES RATE TABLE Apply this product afteT full leaf expansion, unless otheTwise diTected. Use the higheT Tate fOT laTgeT plants andioT dense aTeas of growth. On vines, use the higheT Tate for plants that have Teached the woody stage of growth. Best Tesults aTe obtained when application is made in late summer OT fall afteT fruit formation. In aTid aTeas. best Tesults aTe obtained when applications aTe made in the spTing to eaTly summeT when brush species are at high moisture content and are flowering. Unless otheTwise diTected, apply broadcast tTeatments in 3 to 40 gallons of wateT peT aCTe. EnsuTe thorough coveTage when using hand·held equipment. Symptoms may not appeaT priOT to fTost or senescence with fall treatments. Allow 7 OT mOTe days afteT application befoTe tillage, mowing OT Temoval. Repeat tTeatments may be necessary to control plants TegeneTating from underground pans OT seed. Some autumn coloTs on undesiTable deciduous species aTe acceptable provided no majoT leaf drop has occurred. Reduced peTfoTmance may Tesult if fall treatments are made following a frost. Weed Species Rale Hand-Held Conunents (QT/A) 0/. Solution C = Control; PC = Partial Control AldeT 2.3 - 3.4 1% C Ash 1.7 - 4 1 - 1.7% PC Aspen, quaking 1.7 - 2.3 1% C BeaTmat (BeaTcloveT) 1.7 - 4 1 - 1.7% PC Beech 1.7 - 4 1 - 1.7% PC BiTch 1.7 - 2.3 1% C Blackberry 2.3 . 3.4 1% C Masler Label MON 7827] Page 64 of 118 Version: Apr·2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES Make applications after plants have reached full leaf maturity. Best results are obtained when applications are made in late summer or fall. Applications may also be made after leaf drop and until a killing frost or as long as stems are green. After berries have set or dropped in late fall. blackberry can be controlled by applying a 0.8 percent solution of this product. For control of blackberries after leaf drop and until killing frost or as long as stems are green. apply 2.3 to 2.8 quarts of this product in 10 to 40 gallons of water per acre. Blackgum 1.7 - 4 I - 1.7% Bracken 1.7 - 4 1 - 1.7% Broom; French. Scotch 1 - 1.7% Buckwheat. California 1 - 1.7% Thorough coverage of foliage is necessary for best results. Cascara 1.7 - 4 1 - 1.7% Catsclaw 1% Ceanothus 1.7 - 4 1 - 1.7% Chamise 1% Thorough coverage of foliage is necessary for best results. Cherry; bitter. black. pin Coyote brush 1.7 - 2.3 1% 1 - 1.7% C C C PC PC PC PC C C C Apply when at least 50 percent of the new leaves are fully developed. Dogwood 1.7 - 4 1 - 1.7% PC Elderberry 1.7 - 2.3 1% C Elm 1.7-4 1 - 1.7% PC Eucalyptus 1.7% C For control of eucalyptus resprouts. apply when resprouts are 6 to 12 feet tall. Ensure complete coverage. Avoid application to drought-stressed plants. Florida holly (Brazilian Peppertree) Gorse Hasardia Master Label MON 7827) 1.7 - 4 1.7 - 4 1 - 1.7% 1 - 1.7% 1 - 1.7% Page 65 of 118 PC PC PC Version: Apr~2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES Thorough coverage of foliage is necessary for best results. Hawthorn 1.7 - 2.3 1% C Hazel 1.7 - 2.3 1% C Hickory 1.7-4 1 - 1.7% PC Honeysuc kle 2.3 - 3.4 1% C Hornbeam, 1.7-4 1 - 1.7% PC American Kudzu 2.8 - 4 1.7% C Repeat applications may be required to maintain control. Locust. black 1.7-3.4 1 - 1.7% PC Madrone resprouts 1.7% PC Apply to resprouts that are 3 to 6 feet tall. Best results are obtained with spring/early summer treatments. Manzanita 1.7-4 1.-1.7% PC Maple. red 1.7 - 3.4 1% C Apply a I percent solution when at least 50 percent of the new leaves are fully developed. For panial control. apply 1.5 to 4 quarts of this product per acre. Maple. sugar 1% C Apply when at least 50 percent of the new leaves are fully developed. Monkey flower I - 1.7% PC Thorough coverage of foliage is necessary for best results. Oak; black,white 1.7 - 3.4 1 - 1.7% PC Oak. post 2.3 - 3.4 1% C Oak; northern. 1% C Apply when at least 50 percent of the new pin leaves are fully developed Oak; southern 1.7 - 2.3 1% C red Persimmon 1.7-4 1 - 1.7% PC Pine 1.7 - 4 1 - 1.7% C Master Label MON 78271 Page 66 of 118 Version: Apr-2002 UNMARKED {'7/ll f

I. MAIN LABEL FOR FOOD CROP USES Poison ivy! Poison oak 2.8 - 4 1.7% C Repeat applications may be required to maintain control. Fall treatments must be applied before leaves lose green color. Poplar, yellow Redbud, eastern Rose. multiflora 1.7 - 4 1.7 - 4 1.7 ) - 1.7% PC 1 - 1.7% C 1% C Treatments should be made prior to leaf deterioration by leaf-eating insects. Russian oHve 1.7 - 4 1 - 1.7% PC Sage, black 1% C Thorough coverage of foliage is necessary for best results. Sage, white 1.7 - 4 1 - 1.7% PC Sage brush, California-- 1% C Thorough coverage of foliage is necessary for best results. Salmonberry 1.7-2.3 1% C Salt-cedar 1.7 - 4 1 - 1.7% C Sassafras 1.7 - 4 1 - 1.7% PC Sourwood 1.7 - 4 1 - 1.7% PC Sumac; poison. 1.7-3.4 1 - 1.7% PC smooth, winged Sweetgum 1.7-2.3 1% C Swordfern 1.7-4 1 - 1.7% PC Tallowtree, Chinese 1% C Thorough coverage of foliage is necessary for best results Tan oak resprouts 1.7% PC Apply to resprouts that are less than 3 to 6 feet tall. Best results are obtained with fall applications. Thimbleberry 1.7 - 2.3 Master Label MON 78271 1% Page 67 of 118 C Version: Apr·2002 UNMARKED

"--- L MAIN LABEL FOR FOOD CROP USES (,f!lIf Tobacco, tree I - 1.7% PC Trumpetcreeper 1.7 - 23 1% C Vine maple 1.7 - 4 I - 1.7% PC Virginia creeper 1.7 - 4 I - 1.7% C Waxmyrtle, 1.7-4 I - 1.7% PC southern Willow 23- 3A 1% C 16.0 LIMIT OF WARRANTY AND LIABILITY This Company warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes set forth in the Complete Directions for Use label booklet ("Directions") when used in accordance with those Directions under the conditions described therein. NO OTHER EXPRESS WARRANTY OR IMPLIED WARRANTY OF FITNESS FOR PARTICULAR PURPOSE OR MERCHANT ABILITY IS MADE" This warranty is also subject to the conditions and limitations stated herein. Buyer and all users shall promptly notify this Company of any claims whether based in contract, negligence, strict liability, other ton or otherwise. Buyer and all users are responsible for all loss or damage from use or handling which results from conditions­ beyond the control of this Company, including, but not limited to, incompatibility with products other than those set forth in the Directions. application to or contact with desirable vegetation, unusual weather, weather conditions which are outside the range considered normal at the application site and for the time period when the product is applied, as well as weather conditions which are outside the application ranges set forth in the Directions. application in any manner not explicitly set forth in the Directions, moisture conditions outside the moisture range specified in the Directions. or the presence of products other than those set forth in the Directions in or on the soil. crop or treated vegetation. This Company does not warrant any product reformulated or repackaged from this product except in accordance with this Company's stewardship requirements and with express written permission from this Company. For over-the-top uses on Roundup Ready crop varieties crop safety and weed control performance are not warranted by Monsanto when this product is used in conjunction with "brown bag" or "bin run" seed saved from previous year's production and replanted. THE EXCLUSIVE REMEDY OF THE USER OR BUYER, AND THE LIMIT OF THE LIABILITY OF THIS COMPANY OR ANY OTHER SELLER FOR ANY AND ALL LOSSES, INJURIES OR DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT (INCLUDING CLAIMS BASED IN CONTRACT, NEGLIGENCE, STRICT LIABILITY, OTHER TORT OR OTHERWISE) SHALL BE THE PURCHASE PRICE PAID BY THE USER OR BUYER FOR THE QUANTITY OF THIS PRODUCT INVOLVED, OR, AT THE ELECTION OF THIS COMPANY OR ANY OTHER SELLER, THE REPLACE­ MENT OF SUCH QUANTITY, OR, IF NOT ACQUIRED BY PURCHASE, REPLACEMENT OF SUCH QUANTITY. IN NO EVENT SHALL THIS COMPANY OR ANY OTHER SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES. Master Label MON 78271 Page 68 of 118 Version: Apr·2002 UNMARKED

I. MAIN LABEL FOR FOOD CROP USES Upon opening and using this product, buyer and all users are deemed to have accepted the terms of this LIMIT OF WARRANTY AND LIABILITY which may not be varied by any verbal or written agreement. If terms are not acceptable, return at once unopened. Amplify, Bullet, Degree, Farmsource, Harness, Lariat, Lasso, Micro-Tech, Monsanto and Vine symbol, Permit and TransSorb are trademarks of Monsanto Technology LLC. Assure, Authority, Canopy, Krovar, Leadoff and Lexone are trademarks of E.I. duPont de Nemours & Co. Inc. Direx, Karmex. Linex and Lorox are trademarks of Griffin LLC. Bicep MAGNUM, Dual MAGNUM, F1exstar, Fusion, Princep Caliber, Reflex and Solicam are trademarks of Syngenta CropProtection Inc. Firstrate, FuItime, Python, Surflan, Topnotch and Tordon are trademarks of Dow AgroSciences LLC. Banvel, Clarity, Distinct, Frontier, Guardsman, Marksman, Outlook, Prowl, Pursuit, Pursuit Plus, Scepter, Squadron and Steel are trademarks of BASF Corp. Balance, Folex, Ginstar, and Prep are trademarks of Aventis CropSciences. Goal is a trademark of Rohm and Haas Company. Axiom, DEF, Domain, Epic, Sencor and Turbo are trademarks of Bayer Crop Protection. Aim, Command and Gauntlet are trademarks of FMC Corporation. Devrinol is a trademark of United Phosphorus Inc. Sim-Trol is a trademark of Sipcam Agro USA, Inc. Valor is a trademark of Valent USA Corporation This product is protected by U.S. Patent Nos. 5,688,085; 6,365,551 ; 5,683,958; 5,703,015; 6,063,733; 6,121,199; and 6,121,200. No license granted under any non-U.S. patent(s). EPA Reg. No. 524-LGI In case of an emergency involving this product. Call Collect, day or night, (314) 694-4000. © [DATE] MONSANTO COMPANY ST. LOUIS, MISSOURI, 63167 USA Master Label MON 7827) Page 69 of 118 Version: Apr-2002 UNMARKED

In. SUPPLEMENTAL LABELING FOR FOOD CROP USES T bl fC a eo ontents: C S 1 11 b r rop upplementa a e mg Name Approval Date** A FOR USE IN DORMANT ALFALFA 26-Aug-1997 B FOR THE CONTROL OF ANNUAL WEEDS IN COASTAL 7-Nov-1995 BERMUDAGRASS PASTURES PRIOR TO SPRING GROWTH OR IMMEDIA TEL Y AFTER FIRST CUTTING C FOR DlSTRmUTION AND USE ONLY WITHIN SOUTH ll-Dec-1996 DAKOTA. FOR NON-SELECTIVE CONTROL OF LISTED ANNUAL WEEDS IN SMALL GRAIN CROPPING SYSTEMS D TANK MIX WITH AIM® HERBICIDE FOR IMPROVED 16-Feb-2000 SYMPTOMS IN PRE-PLANT APPLICATIONS IN CORN, SOYBEANS OR WHEAT E TANK MIX WITH RESOURCE® FOR IMPROVED SYMPTOMS 16-Feb-2000 IN PRE-PLANT APPLICATIONS IN CORN OR SOYBEANS F FOR AERIAL APPLICATION IN CALIFORNIA ONLY 29-Dec-2000 G FOR AERIAL APPLICATION IN FRESNO COUNTY, 7-Nov-1995 CALIFORNIA ONLY (From February 15 through March 31 Only) H FOR AERIAL APPLICATION IN ARKANSAS ONLY ll-Feb-1997 I USE ONLY FOR SEED PRODUCTION OF ALFALFA WITH 16-Feb-2000 THE ROUNDUPREADY® GENE J USE ONLY FOR SEED PRODUCTION OF LETTUCE WITH 16-Feb-2000 THE ROUNDUP READY® GENE K USE ONLY FOR SEED PRODUCTION OF RICE WITH THE ll-Aug-1999 ROUNDUP READY® GENE L FOR USE ONLY FOR SEED PRODUCTION OF WHEAT WITH 29-Sep-1999 THEROUNDUPREADY@GENE M FOR CONTROLLING BARNY ARDGRASS (ECHINOCHLOA 1 4-May-200 1 CRUS-GALLl) IN RICE USING RENOVATION TREATMENTS IN CALIFORNIA ONLY N FOR NEW COTTON LINES WITH THE ROUNDUP READY ll-Aug-1999 GENE - IN-CROP APPLICATIONS ** Approval Dates for Roundup Ultra or Roundup UltraMAX Master Label MON 78271 Page 70 of 118 Version: Apr-2002 UNMARKED ?lllIf

II. SUPPLEMENTAL LABELING FOR FOOD CROP USES SUPPLEMENTAL LABELING READ THE ENTIRE LABEL FOR [INSERT BRAND NAME) BEFORE PROCEEDING WITH THE USE DIRECTIONS CONTAINED IN THIS SUPPLEMENTAL LABELING. When using [INSERT BRAND NAME) as permitted according to this supplemental labeling. read and follow all applicable directions. restrictions. and precautions on the label booklet provided with the pesticide container and on this supplemental labeling. This supplemental labeling muSt be in the possession of the user at the time of pesticide application. [INSERT BRAND NAME HERE] Herbicide EPA Reg. No. 524-LGI Keep out of reach of children. WARNING! AVISO! In case of an emergency involving this product. Call Collect. day or night. 314-694-4000. [INSERT BRAND NAME] is a registered trademark of Monsanto Technology LLC. DIRECTIONS FOR USE It is a violation of Federal law to use this product in any manner inconsistent with its labeling. This labeling must be in the possession of the user at the time of herbicide application. A VOID CONTACT OF HERBICIDE WITH FOLIAGE. GREEN STEMS. EXPOSED NON-WOODY ROOTS OR FRUIT OF CROPS (EXCEPT AS SPECIFIED FOR INDIVIDUAL ROUNDUP READY CROPS). DESIRABLE PLANTS AND TREES. BECAUSE SEVERE INJURY OR DESTRUCTION MAY RESULT. See "GENERAL INFORMATION" and "MIXING" sections of the label booklet for [INSERT BRAND NAME) for essential product performance information. Read the "Limit of Warranty and Liability" in the label booklet for [INSERT BRAND NAME) before using. These terms apply to ihis supplemental labeling and if these terms are not acceptable, return the product unopened at once. © [DATE] MONSANTO COMPANY ST. LOUIS. MISSOURI 63167 Master Label MON 78271 Page 71 of lIS Version: Apr-2002 UNMARKED

11. SUPPLEMENTAL LABELING FOR FOOD CROP USES I A. FOR USE IN DORMANT ALFALFA RECOMMENDATIONS This product will control or suppress many weeds. including quackgrass. downy brome and cheatgrass in dormant alfalfa. Apply 6 to 9 fluid ounces per acre of this product. Apply in the spring to alfalfa that is dormant. Applications should be made after spring temperatures have warmed enough to encourage resumption of weed growth, but prior to initiation of trifoliate leaf expansion of the alfalfa. Applications made after expansion of the first trifoliate leaf of the alfalfa will cause growth reduction and reduced crop yield. Do not use ammonium sulfate when spraying dormant alfalfa with [INSERT BRAND NAME]. Do not use this product where a slight yield reduction in the first cutting of alfalfa cannot be tolerated. Do not make more than one application per year. Allow 36 hours after application before grazing livestock or harvesting. Slight discoloration of the alfalfa may occur. but the alfalfa will regreen and regrow under moist soil conditions as effects of this product wear off. Application of this product is limited to persons who have attended a Monsanto-approved training program. Application of this product can cause crop injury. Any crop injury is the sole responsibility of the applicator. B. FOR THE CONTROL OF ANNUAL WEEDS IN COASTAL BERMUDAGRASS PASTURES PRIOR TO SPRING GROWTH OR IMMEDIA TEL Y AFTER FIRST CUTTING RECOMMENDATIONS 7~/llf This product may be applied at 12 fluid ounces per acre to control the weeds listed below and most other winter annual grass and broad leaf weeds in established coastal Bermudagrass pastures. Annual bluegrass Cheat Crabgrass Henbit Johnsongrass. seedling Little barley Oats Ryegrass. Italian Sand bur. field Sunflower Wheat Wild mustard TIMING OF APPLICATION Applications prior to spring growth: Apply this product in the late winter or early spring but before new coastal Bermudagrass growth begins in the spring. Applications to new growth can damage the Bermudagrass. Remove domestic livestock from the pasture before making the application. Wait 60 days after making this application before grazing or harvesting the treated area. Master Label MON 78271 Page 72 of 118 Version: Apr~2002 UNMARKED

12. SUPPLEMENTAL LABELING FOR FOOD CROP USES Applications following the first cUlling: Apply this product after the first Bermudagrass cutting when the Bermudagrass has not yet begun to regrow. Applications made after regrowth has begun can damage the Bermudagrass. Remove domestic livestock from the pasture before making the application. Wait 28 days after making this application before grazing or harvesting the treated area. NOTE: ONLY ONE APPLICATION PER YEAR MAY BE MADE TO ANY ONE FIELD. A SPRING APPLICATION PRIOR TO GROWTH AND AN APPLICATION FOLLOWING THE FIRST CUTTING MAY NOT BE MADE ON THE FIELD DURING THE SAME YEAR. C. FOR DISTRffiUTION AND USE ONLY WITHIN SOUTH DAKOTA. FOR NON­ SELECTIVE CONTROL OF LISTED ANNUAL WEEDS IN SMALL GRAIN CROPPING SYSTEMS RECOMMENDA TIONS Refer to the [INSERT BRAND NAMEJlabel for rate recommendations and weeds controlled. For ground applications. use 3 to 5 gallons of water per acre. For aerial applications. use 2 to 3 gallons of water per acre. ATTENTION A VOID DRIFT. EXTREME CARE MUST BE USED WHEN APPLYING THIS PRODUCT TO PREVENT INJURY TO DESIRABLE PLANTS AND CROPS. Do not allow the herbicide solution to mist. drip. drift. or splash onto desirable vegetation since minute quantities of this herbicide can cause severe damage or destruction to the crop. plants or other areas on which treatment was not intended. The likelihood of injury occurring from the use of this product is greatest when winds are gusty or in excess of 5 miles per hour or when other conditions, including lesser wind velocities. will allow spray drift to occur. When spraying. avoid combinations of pressure and nozzle type that will result in splaller or fine panicles (mist) that are likely to drift. AVOID APPLYING AT EXCESSIVE SPEED OR PRESSURE. NOTE: To prevent injury to adjacent desirable vegetation, appropriate buffer zones must be maintained. Adjust boom height on ground equipment to prevent streaked. overlapped or uneven applications. Coarse sprays are less likely to drift; therefore. do not use nozzles or nozzle configurations that dispense spray as fine spray droplets. In aerial applications. do not angle nozzles forward into the airstream and do ot increase spray volume by increasing nozzle pressure. Ensure uniform application. Use appropriate marking devices when applying herbicides by air. Avoid spraying when weeds are subject to moisture stress, when dust is on foliage. or when straw canopy covers the weeds. Thoroughly wash aircraft. especially landing gear. after each day of spraying to remove residue of this product accumulated during spraying or from spills. PROLONGED EXPOSURE OF THIS PRODUCT TO UNCOATED STEEL SURFACES MA Y RESULT IN CORROSION AND POSSIBLE FAILURE OF PART. Masler Label MON 78271 Page 73 of 118 Version: Apr*2002 UNMARKED

II. SUPPLEMENTAL LABELING FOR FOOD CROP USES LANDING GEAR IS MOST SUSCEPTIBLE. The maintenance of an organic coating (paint) which meats aerospace specification MIL-C-38413 may prevent corrosion. D. TANK MIX WITH AIM® HERBICIDE FOR IMPROVED SYMPTOMS IN PRE­ PLANT APPLICATIONS IN CORN, SOYBEANS OR WHEAT RECOMMENDA TlONS This tank-mixture will significantly enhance the speed of symptomatology appearance on cenain weeds when applied as a pre-plant treatment prior to corn, soybeans or wheat. This mixture may be applied prior to planting or emergence of labeled crops. This mixture will not provide residual control of weeds that are un-emerged at the time of treatment. Combine [INSERT BRAND NAME] (24 fluid ounces of product per acre) and AIM (0.144 ounce per acre) in the spray tank in JO to 20 gallons of water per acre. For best results, make applications to actively growing weeds. Ammonium sulfate at I to 2 percent by weight or 8.5 to 17 pounds per 100 gallons of water may be added. The addition of 2,4-D or dicamba is not recommended. SPECIFIC MIXING RECOMMENDATIONS Option I I. Fill the spray tank one-half full with water and start the agitation. 2. Add AIM at 0.144 ounce per acre and mix thoroughly. 3. If desired add ammonium sulfate at I to 2 percent by weight or 8.5 to 17 pounds per 100 gallons of spray. 4. Add [INSERT BRAND NAME] at 24 fluid ounces per acre and finish filling the spray tank with water. Option 2 I. Fill the spray tank one-half full with water and start the agitation. 2. If desired add ammonium sulfate at Ito 2 percent by weight or 8.5 to 17 pounds per 100 gallons of spray. 3. Add [INSERT BRAND NAME] at 24 fluid ounces per acre. 4. Prepare a slurry of AIM with water and add to the spray tank. Read and follow the AIM label for additional application instructions and precautions. E. TANK MIX WITH RESOURCE® FOR IMPROVED SYMPTOMS IN PRE-PLANT APPLICATIONS IN CORN OR SOYBEANS RECOMMENDA TlONS This tank-mixture will significantly enhance the speed of symplOmology appearance on cenain weeds when applied as a pre-plant treatment prior to corn or soybeans. This mixture may be applied prior to planting or emergence of labeled crops. This mixture will not provide residual control of weeds that are un-emerged at the time of treatment. Combine [INSERT BRAND NAME] (24 fluid ounces of product per acre) and Resource® (2.08 fluid ounces per acre) in the spray tank in JO to 20 gallons of water per acre. For best results, make applications to actively growing weeds. Ammonium sulfate at I to 2 percent by weight or 8.5 to 17 pounds per 100 gallons of water may be added. The addition of 2.4-D or dicamba is not recommended. SPECIFIC MIXING RECOMMENDATIONS Option I I. Fill the spray tank one-half full with water and start the agitation. 2. Add Resource at 2.08 fluid ounces per acre and mix thoroughly. Master Label MON 78271 Page 74 of 118 Version: Apr-2002 UNMARKED

II. SUPPLEMENTAL LABELING FOR FOOD CROP USES 3. If desired add ammonium sulfate at 1 to 2 percent by weight or 8.5 to 17 pounds per 100 gallons of spray. 4. Add [INSERT BRAND NAME] at 24 fluid ounces per acre and finish filling the spray tank with water. Option 2 I. Fill the spray tank one-half full with water and start the agitation. 2. If desired add ammonium sulfate at 1 to 2 percent by weight or 8.5 to 17 pounds per 100 gallons of spray. 3. Add [INSERT BRAND NAME] at 24 fluid ounces per acre. 4. Add Resource at 2.08 fluid ounces per acre to the spray tank. Read and follow the Resource label for additional application instructions and precautions. Resource is a trademark of Valent USA Corporation. I F. FOR AERIAL APPUCA TION IN CALIFORNIA ONLY Aerial applications of this product are allowed in the following situations:

1. In fallow and reduced tillage systems prior to the emergence or transplanting of labeled crops.
2. In alfalfa and pasture renovation applications.
3. Over-the-top applications in Roundup Ready corn and cotton. Refer to the supplementallahels for Roundup Ready corn and Roundup Ready cotton for specific application instructions for over-the-top applications in these crops.
4. Pre harvest in alfalfa, com, cotton, wheat, Roundup Ready corn and Roundup Ready cotton. Refer to the [INSERT BRAND NAME] booklet or supplemental label for Roundup Ready corn and Roundup Ready cotton for specific preharvest application instructions for each individual crop. Do not plant subsequent crops other than those listed in the label booklet for 30 days following application. When applied as recommended under the conditions described, this product controls annual and perennial weeds listed in the label booklet. When tank mixing this product with 2,4-D for aerial applications, only 2,4-D amine formulations may be used. This tank mixture may be used for fallow and reduced tillage systems and alfalfa and pasture renovation applications only. DO NOT EXCEED A MAXIMUM RATE OF 48 FLUID OUNCES PER ACRE OF THIS PRODUCT WHEN MAKING APPLICATIONS BY AIR IN COTTON AND ROUNDUP READY COTTON PRIOR TO HARVEST, FALLOW AND REDUCED TILLAGE SYSTEMS AND ALFALFA AND PASTURE RENOVATION APPLICATIONS. DO NOT EXCEED A MAXIMUM RATE OF 24 FLUID OUNCES PER ACRE OF THIS PRODUCT WHEN MAKING APPLICATIONS BY AIR IN ALFALFA, CORN, WHEAT AND ROUNDUP READY CORN PRIOR TO HARVEST. THIS· RESTRICTION ALSO APPLYS TO OVER-THE-TOP APPLICATIONS IN ROUNDUP READY CORN AND COTTON. Aerial Equipment Use the recommended rates of this product in 3 to 15 gallons of water per acre. Do not apply directly to water, to areas where surface water is present or to intertidal areas below the mean high water mark. Do not contaminate water when disposing of equipment wash waters. Master Label MON 78271 Page 75 of 118 Version: Apr~2002 UNMARKED

n. SUPPLEMENTAL LABELING FOR FOOD CROP USES AVOID DRIFf -DO NOT APPLY WHEN WINDS ARE GUSTY OR UNDER ANY OTHER CONDITION WHICH FAVORS DRIFf. DRIFT MAY CAUSE DAMAGE TO ANY VEGETATION CONTACTED TO WHICH TREATMENT IS NOT INTENDED. TO PREVENT INJURY TO ADJACENT DESIRABLE VEGETATION. APPROPRIATE BUFFER ZONES MUST BE MAINTAINED. Use the following guidelines when aerial applications are made near crops or desirable perennial vegetation after bud break and before total leaf drop. andlor near other desirable vegetation or annual crops.

1. Do not apply within 100 feet of all desirable vegetation or crop(s).

2. If wind up to 5 miles per hour is blowing toward desirable vegetation or crop(s). do not apply within 500 feet of the desirable vegetation or crop(s).

3. Winds blowing from 5 to 10 miles per hour toward desirable vegetation or crop(s) may require buffer zones in excess of 500 feet.

4. Do not apply when winds are in excess of 10 miles per hour or when inversion conditions exist. Coarse sprays are less likely to drift; therefore. do not use nozzles or nozzle configurations that dispense spray as fine spray droplets. Do not angle nozzles forward into the air-stream and do not increase spray volume by increasing nozzle pressure. Drift control additives may be used. When a drift control additive is used. read and carefully observe the cautionary statements and all other information appearing on the additive label. Ensure uniform application-To avoid streaking. uneven. or over-lapped application. use appropriate marking devices. Thoroughly wash aircraft. especially landing gear. after each day of spraying to remove residues of this product accumulated during spraying or from spills. PROLONGED EXPOSURE OF THIS PRODUCT TO UNCOATED STEEL SURFACES MAY RESULT IN CORROSION AND POSSIBLE FAILURE OF THE PART. LANDING GEAR IS MOST SUSCEPTIBLE. The maintenance of an organic coating (paint) which meets aerospace specification MIL-C-38413 may prevent corrosion. O. FOR AERIAL APPLICATION IN FRESNO COUNTY. CALIFORNIA ONLY (From February 15 through March 31 Only) Applicable Area This supplement only applies to the area contained inside the following boundaries within Fresno County. California. North: Fresno County line South: Fresno County line East: State Highway 99 West: Fresno County line General Information Always read and follow the label directions and precautionary statements for all products used in the aerial application. Observe the following directions to minimize off-site movement during aerial application of this product. Minimization of off-site movement is the responsibility of the grower. Pest Control Advisor and aerial applicator. Written Recommendations Master Label MON 78271 Page 76 of 118 Version: Apr-2002 UNMARKED

5. SUPPLEMENTAL LABELING FOR FOOD CROP USES A written recommendation MUST be submitted by or on behalf of the applicator to the Fresno County Agricultural Commissioner 24 hours prior to the application. This written recommendation MUST state the proximity of surrounding crops, and that conditions of each manufacturer's product label and this label have been satisfied. A erial A pplicator Training and Equipment Aerial application of this product is limited to pilots who have successfully completed a Fresno County Agricultural Commissioner and California Department of Pesticide Regulation approved training program for aerial application of herbicides. All aircraft must be inspected, critiqued in flight and certified at a Fresno County Agricultural Commissioner approved fly-in. Test and calibrate spray equipment at intervals sufficient to insure that proper rates of herbicides and adjuvants are being applied during commercial use. Applicator must document such calibrations and testing. Demonstration of performance at Fresno County Agricultural Commissioner approved fly-ins constitutes such documentation, or other written records showing calculations and measurements of flight and spray parameters acceptable to the Fresno County Agricultural Commissioner. Applications at Night-Do not apply this product by air earlier than 30 minutes prior to sunrise andlor later than 30 minutes after sunset without prior permission from the Fresno County Agricultural Commissioner. To report known or suspected misuse of this product, call 1-800-332-311 L For additional information on the proper aerial application of this product, call 916-784-1718. Note: For aerial application from April I through February 14, refer to the "FOR AERIAL APPLICATION IN CALIFORNIA ONLY" supplemental label. I H. FOR AERIAL APPLICATION IN ARKANSAS ONLY USE DIRECTIONS A VOID DRIFT. DO NOT APPLY INTO STILL AIR WHERE THERE IS A TEMPERATURE INVERSION LAYER LOW ENOUGH FOR FINE SPRAY PARTICLES TO BECOME SUSPENDED AND MOVE OUTSIDE THE TARGET AREA WHEN THE INVERSION LAYER MOVES. DO NOT APPLY WHEN WINDS ARE GUSTY OR UNDER ANY OTHER CONDITION THAT FAVORS DRIFT. DRIFT IS LIKELY TO CAUSE DAMAGE TO ANY VEGETATION CONTACTED. TO PREVENT INJURY TO ADJACENT DESIRABLE VEGETATION, APPROPRIATE BUFFER ZONES MUST BE MAINTAINED. Use the recommended rate of this product in 3 to 15 gallons of water per acre. Use sufficient carrier volume and appropriate equipment set-up to form droplets large enough to avoid drift potential. Coarse droplets in the 300 to 500 (VMD) micron range are recommended. Applications should typically be made with the nozzle release point at 8 to 15 feet above the top of the target plants unless a greater height is required for aircraft safety. The distance of the outermost nozzles on the boom must not exceed 75 percent of the length of the wingspan or rotor. In many cases, reducing this distance to 65 percent of the length of the wingspan or rotor will improve drift control without affecting the swath width. Nozzles must always discharg~ backward parallel with the air stream and never discharge downwards more than 45 degrees on fixed wing aircraft or forward of the prevailing airflow on rotary winged aircraft. Avoid the use of nozzles with wide-angle discharge. Do not apply this product when winds are in excess of 10 mph. Do not apply when there is a low-level inversion where fine spray particles could be suspended in still air and move outside the target area when the inversion layer moves. These conditions may occur when wind speeds are less than 2 mph. Masler label MON 78271 Page 77 of 118 Version: Apr-2002 UNMARKED

II. SUPPLEMENTAL LABELING FOR FOOD CROP USES Use the following guidelines when applications are made near crops or other desirable vegetation: I. Do not apply within 100 feet of any desirable vegetation or crops. 2. If wind up to 5 mph is blowing toward desirable vegetation or crops, do not apply within 500 feet upwind of the desirable vegetation or crops. 3. Winds blowing from 5 to 10 mph toward desirable vegetation Or crops will likely require buffer zones in excess of 500 feet.

1. USE ONLY FOR SEED PRODUCTION OF ALFALFA WITH THE ROUNDUP READY® OENE NOTE: THIS PRODUCT MAYBE USED FOR CONTROL OF NON-GL YPHOSATE TOLERANT ALFALFA IN PRODUCTION FIELDS OF ALFALFA CONTAINING THE ROUNDUP READY GENE. SEVERE INJURY OR DEATH OF ALFALFA WILL RESULT IF ALFALFA VARJETIESTHAT DO NOT CONTAIN THE ROUNDUP READY GENE ARE SPRAYED WITH THIS PRODUCT. USE RECOMMENDATIONS This product will control non-glyphosate tolerant alfalfa in seed production fields of alfalfa containing the Roundup Ready gene. Apply up to 48 fluid ounces of this product in 5 to 20 gallons of spray solution per acre as a broadcast spray. Subsequent applications of up to 48 fluid ounces per acre each may be applied, if needed to control non-glyphosate tolerant alfalfa plants. DO NOT EXCEED A MAXIMUM RATE OF 6 QUARTS OF THIS PRODUCT PER ACRE PER SEASON. Application timing-This product can be applied to Roundup Ready alfalfa from emergence to harvest. Treated alfalfa or the resulting seed may not be used for food or feed. Do not feed Or graze treated alfalfa. Do not process treated alfalfa or resulting seed for food or feed. J. USE ONLY FOR SEED PRODUCTION OF LETTUCE WITH THE ROUNDUPREADY®OENE NOTE: THIS PRODUCT MAY BE USED FOR CONTROL OF NON-GL YPHOSATE TOLERANT LETTUCE IN PRODUCTION FIELDS OF LETTUCE CONTAINING THE ROUNDUP READY GENE. SEVERE INJURY OR DEATH OF LETTUCE WILL RESULT IF LETTUCE VARIETIES THAT DO NOT CONTAIN THE ROUNDUP READY GENE ARE SPRAYED WITH THIS PRODUCT. USE RECOMMENDA TIONS This product will control non-glyphosate tolerant lettuce in seed production fields of lettuce containing the Roundup Ready gene. Apply up to 48 fluid ounces of this product in 5 to 20 gallons of spray solution per acre as a broadcast spray. A second application up to 48 fluid ounces per acre may be applied, if needed to control non-glyphosate tolerant lettuce plants. DO NOT EXCEED A MAXIMUM RATE OF 2.8 QUARTS OF THIS PRODUCT PER ACRE PER SEASON. Application timing-This product can be applied to Roundup Ready lettuce from emergence to harvest. Master Label MON 78271 Page 78 of 118 Version: Apr·2002 UNMARKED

II. SUPPLEMENTAL LABELING FOR FOOD CROP USES Treated lettuce may not be used for food or feed. Do not feed or graze treated lettuce. Do not process treated lettuce for food or feed. K. USE ONLY FOR SEED PRODUCTION OF RICE WITH THE ROUNDUP READY@ GENE NOTE: THIS PRODUCT MAY BE USED FOR CONTROL OF NON-GL YPHOSATE TOLERANT RICE IN PRODUCTION FIELDS OF RICE CONTAINING THE ROUNDUP READY GENE. SEVERE INJURY OR DEATH WILL RESULT IF RICE VARIETIES THAT DO NOT CONT AlN THE ROUNDUP READY GENE ARE SPRAYED WITH THIS PRODUCT. USE RECOMMENDATIONS This product will control non-glyphosate tolerant rice in seed production fields of rice containing the Roundup Ready gene. Apply up to 48 fluid ounces of this product in 5 to 20 gallons of spray solution per acre as a broadcast spray. A second application up to 48 fluid ounces per acre may be applied. if needed to control non­ glyphosate tolerant rice plants. DO NOT EXCEED A MAXIMUM RATE OF 2.8 QUARTS OF THIS PRODUCT PER ACRE PER SEASON. Application timing -- This product can be applied to Roundup Ready rice from emergence to harvest. Treated rice may not be used for food or feed. Do not feed or graze treated rice. Do not process treated rice for food or feed. L. FOR USE ONLY FOR SEED PRODUCTION OF WHEAT WITH THE ROUNDUPREADY®GENE NOTE: THIS PRODUCT MAY BE USED FOR CONTROL OF NON-GL YPHOSATE TOLERANT WHEAT IN PRODUCTION FIELDS OF WHEAT CONT AINING THE ROUNDUP READY GENE. SEVERE INJURY OR DEATH WILL RESULT IF WHEAT V ARIETIES THAT DO NOT CONT AlN THE ROUNDUP READY GENE ARE SPRAYED WITH THIS PRODUCT. USE RECOMMENDA TIONS This product will control non-glyphosate tolerant wheat in seed production fields of wheat containing the Roundup Ready gene. Apply up to 24 fluid ounces of this product in 5 to 20 gallons of spray solution per acre as a broadcast spray. A second application up to 24 fluid ounces per acre may be applied. if needed to control non-glyphosate tolerant wheat plants. DO NOT EXCEED A MAXIMUM RATE OF 48 FLUID OUNCES OF THIS PRODUCT PER ACRE PER SEASON. Application timing-This product can be applied to Roundup Ready wheat from emergence to harvest. Treated wheat may not be used for food or feed. Do not feed or graze treated wheat. Do not process treated wheat for food or feed. Master Label MON 78271 Page 79 of 118 Version: Apr·2002 UNMARKED

11. SUPPLEMENTAL LABELING FOR FOOD CROP USES M. FOR CONTROLLING BARNY ARDGRASS (ECHINOCHLOA CRUS-GALLI) IN RICE USING RENOVATION TREATMENTS IN CALIFORNIA ONLY RECOMMENDATIONS Renovation Treatment USE INSTRUCTIONS: This product may be applied as a renovation treatment in rice crops to control barnyard grass infestations using ground broadcast spray or hand-held equipment. Renovation is defined as herbicide treatment that will produce crop and weed destruction in an entire field or contiguous area treated within a field. Follow the application methods and recommended treatment rates in the label booklet for [INSERT BRAND NAMEI herbicide. PRECAUTIONS, RESTRICTIONS: The crop receiving spray in the treated area will be killed. Take care to avoid drift or spray outside target area for the same reason. The rice straw and stubble from the treated area, including a 25-foot buffer zone on all sides, shall not be used for grazing, animal bedding or any feed purposes. No Aerial applications are permiued for rice renovation using this supplemental label. N. FOR NEW COTTON LINES WITH THE ROUNDUP READY® GENE - IN-CROP APPLICATIONS Generallnrormation ATTENTION: MONSANTO RECOMMENDS THIS PRODUCT FOR USE ONLY OVER-THE-TOP OF OR DIRECTED ONTO IMPROVED COTTON V ARIETIES THAT ARE DESIGNATED AS COTTON WITH THE ROUNDUP READY GENE. SEVERE INJURY OR DEATH OF COTTON WILL RESULT IF ANY COTTON VARIETIES NOT PROPERLY DESIGNATED AS HA VING THE ROUNDUP READY GENE ARE SPRA YED WITH THIS PRODUCT. AVOID CONTACT OF HERBICIDE WITH FOLIAGE, GREEN STEMS, OR FRUIT OF CROPS, OR ANY DESIRABLE PLANTS AND TREES, OTHER THAN CROPS WITH THE ROUNDUP READY GENE, SINCE SEVERE INJURY OR DESTRUCTION WILL RESULT. ROUNDUP READY COTTON V ARIETIES MUST BE PURCHASED FROM AN AUTHORIZED LICENSED SEED SUPPLIER. THE DESIGNATION, "ROUNDUP READY", INDICATES THE COTTON VARIETY CONTAINS A PATENTED PROPRIETARY TRAJT. Application Instructions This product will control many troublesome weeds with over·the·top, post·directed, hooded sprayer, or preharvest applications in Roundup Ready cOUon. See the APPLICATION EQUIPMENT AND TECHNIQUES section of the [INSERT BRAND NAMEJlabel booklet for more information. Master Label MON 7827 J Page 80 of 118 Version: Apr-2002 UNMARKED

-. ,'0-:'" II. SUPPLEMENTAL LABELING FOR FOOD CROP USES Maximum Allowable Yearly Rates Combined total per year for all applications Preplant. Preemergence applications Total over-the-top applications from cracking to layby Total precision post-directed or hooded applications through layby Maximum preharvest application Tate 6 quarts per acre 4 quarts per acre 2 quarts per acre 48 fluid ounces per acre 48 fluid ounces per acre NOTE: Always plant into a weed free seedbed. In no-till and stale seedbed systems. always burn down existing weeds before cotton emerges. Apply a preplant burndown treatment of 12 to 36 fluid ounces per acre of this product. Sprayer Preparation: It is important that sprayer and mixing equipment be clean and free of pesticide residue before making applications of this product to Roundup Ready cotton. Follow the cleaning procedures specified on the label of the product(s) previously used. Cotton is very sensitive to many herbicides at extremely low concentrations and care should be taken to thoroughly clean all equipment prior to use. There are no rotational crop restrictions following applications of this product. Over-the-top applications: Up to 2 quarts per sprayed acre of this product may be applied by aerial or ground broadcast application equipment postemergence to Roundup Ready cotton from the ground cracking stage until layby. The Annual and Perennial Weeds Rate Tables in the label booklet for [INSERT BRAND NAME] should be used to determine application rate. Any single over-the-top application should not exceed 48 fluid ounces per sprayed acre. Sequential applications of this product must be at least 7 days apart. With ground broadcast equipment; apply this product in 5 to 20 gallons of spray solution per acre. Carefully select proper nozzle and spray pressure to avoid spraying a fine mist. For best results with ground application equipment. use flat-fan nozzles. Check for even distribution of spray droplets. For aerial applications. apply this product in 3 to 15 gallons of water per acre. DO NOT EXCEED A MAXIMUM RATE OF 24 FLUID OUNCES PER ACRE OF THIS PRODUCT WHEN MAKING APPLICATIONS BY AIR. AVOID DRIFT. EXTREME CARE MUST BE USED WHEN APPLYING THIS PRODUCT TO PREVENT INJURY TO DESIRABLE PLANTS AND CROPS WHICH DO NOT CONTAIN THE ROUNDUP READY GENE. Do not apply during low-level inversion conditions. when winds are gusty or under any other conditions that favor drift. Drift may cause damage to any vegetation contacted to which treatment is not intended. To prevent injury to adjacent desirable vegetation. appropriate buffer zones must be maintained. Post-directed or hooded applications: In addition to the over-the-top applications. up to 48 fluid ounces per sprayed acre may be applied as a post-directed or hooded application to Roundup Ready cotton through layby. These application methods may be preferred when there is a need to direct the spray onto weeds that are growing under the crop canopy. Equipment should be used which directs the spray into the lower crop canopy so that weeds in the row are covered. For best results. make applications while weeds are small (less than 3 inches). Sequential in-crop applications must be at least 7 days apart from any other in-crop application of this product. ATTENTION: USE OF [INSERT BRAND NAME] IN ACCORDANCE WITH LABEL DIRECTIONS IS EXPECTED TO RESULT IN NORMAL GROWTH OF ROUNDUP READY COTTON, HOWEVER, VARIOUS ENVIRONMENTAL CONDITIONS, AGRONOMIC PRACTICES AND OTHER FACTORS MAKE IT IMPOSSIBLE TO ELIMINATE ALL RISKS ASSOCIATED WITH THIS PRODUCT, EVEN WHEN APPLICATIONS ARE MADE IN CONFORMANCE WITH THE LABEL SPECIFICATIONS. IN SOME CASES, THESE FACTORS CAN RESULT IN UNANTICIPA TED RESULTS INCLUDING YIELD LOSS. Master label MON 78271 Page 81 of 118 Version: Apr-2002 UNMARKED

II. SUPPLEMENTAL LABELING FOR FOOD CROP USES Weeds controlled. For specific rates of application and instructions for control of various annual and perennial weeds. refer to the "ANNUAL and PERENNIAL WEEDS RATE TABLE" sections of the label booklet. [INSERT BRAND NAME] applied at 24 to 48 fluid ounces per acre will control or suppress the growth of the following perennial weeds and reduce crop competition: yellow and purple nutsedge. rhizome johnsongrass. common 8ermudagrass. silverleaf nightshade. trumpet creeper. and redvine. Fall preharvest applications may be required for control of these perennial weeds. Tank mixtures with other herbicides may result in reduced weed control. or may cause crop injury and are not recommended for applications where the spray contacts the colton plant. Some weeds with multiple germination times or suppressed (stunted) weeds may require sequential applications of this product for control. Preharvest applications: This product may be applied for preharvest annual and perennial weed control as a broadcast treatment to Roundup Ready colton any time after layby up to 7 days prior to harvest. This product may be tank mixed with DEFT'" 6. FolexT .... Ginstar. or PrepT ... to enhance colton leaf drop. Allow a minimum of 7 days between final application and harvest. No more than 48 fluid ounces of this product per acre may be applied preharvest (between layby and seven days prior to harvest). Do not apply more than 24 fluid ounces of this product per acre by air. NOTE: This product will not enhance the performance of harvest aids when applied to Roundup Ready colton. Do not apply [INSERT BRAND NAME] preharvest to colton grown for seed. PrecautionsIRestrictions: The combined total application from crop emergence until harvest must not exceed 6 quarts per acre. Allow a minimum of? days between final application and harvest. Tank mixtures with other herbicides may result in reduced weed control, or may cause crop injury and are not recommended for applications where the spray contacts the colton plant. Do not apply [INSERT BRAND NAME] preharvest to cotton grown for seed. Masler Label MON 78271 Page 82 of 118 Version: Apr-2002 UNMARKED

--_ ... _--- 1m. MAIN LABEL FOR INDUSTRIAL, TURF, ORNAMENTAL USES [INSERT BRAND NAME] The complete broad-spectrum postemergence professional herbicide for industrial, turf and ornamental weed control. Complete Directions for Use EPA Reg. No. 524-LGJ AVOID CONTACT OF HERBICIDE WITH FOLIAGE, GREEN STEMS, EXPOSED NON·WOODY ROOTS OR FRUIT OF CROPS), DESIRABLE PLANTS AND TREES, BECAUSE SEVERE INJURY OR DESTRUCTION IS LIKELY TO RESULT. Read the entire label before using this product. Use only according to label instructions. Container Label Statement (5 gallons or smaller) This container is not to be sold to homeowners for residential use. It is a violation of Federal law to use this product in any manner inconsistent with its labeling. This product can only be used in accordance with the Directions for Use on this label or in separately published Monsanto Supplemental Labeling. Not all products recommended on this label are registered for use in California. Check the registration status of each product in California before using. Read the "LIMIT OF WARRANTY AND LIABILITY" statement at the end of the label before buying or using. If terms are not acceptable. return at once unopened. THIS IS AN END-USE PRODUCT. MONSANTO DOES NOT INTEND AND HAS NOT REGISTERED IT FOR REFORMULATION. SEE INDIVIDU AL CONTAINER LABEL FOR REPACKAGING LIMIT A TIONS. Refillable Container Label Statement THIS IS AN END-USE PRODUCT. MONSANTO DOES NOT INTEND AND HAS NOT REGISTERED IT FOR REFORMULATION. IT IS INTENDED THAT REPACKAGING BE ONLY IN ACCORDANCE WITH A MONSANTO REPACKAGING OR TOL REPACKAGING AGREEMENT. Non-Refillable Container Label Statement: THIS IS AN END-USE PRODUCT. MONSANTO DOES NOT INTEND AND HAS NOT REGISTERED IT FOR REFORMULATION OR REPACKAGING CONTENTS Master Label MON 7827) Page 83 of 118 Version: Apr-2002 UNMARKED

lII. MAIN LABEL FOR INDUSTRIAL. TURF. AND ORNAMENTAL USES 1 1.0 INGREDIENTS 2 2.0 IMPORTANT PHONE NUMBERS 3 3.0 PRECAUTIONARY STATEMENTS 3.1 Hazards to Humans and Domestic Animals 3.2 Environmental Hazards 3.3 Physical or Chemical Hazards 4 4.0 STORAGE AND DISPOSAL 5 5.0 GENERAL INFORMATION (How This Product Works) 6 6.0 MIXING 6.1 Mixing with Water 6.2 Tank Mixing Procedure 6.3 Mixing for Hand-Held Sprayers 6.4 Colorants or Dyes 7 7.0 APPLICATION EQUIPMENT AND TECHNIQUES 7.1 Aerial Equipment 7.2 Ground Broadcast Equipment 7.3 Hand-Held or High-Volume Equipment 7.4 Selective Equipment 7.5 Injection Systems 7.6 CDA Equipment 8 8.0 SITE AND USE RECOMMENDATIONS 8.1 Cut Stumps 8.2 Forestry Site Preparation 8.3 General Non-crop Areas and Industrial Sites 8.4 Habitat Management 8.5 Injection and Frill (Woody Brush and Trees) 8.6 Ornamentals. Plant Nurseries, and Christmas Trees 8.7 Railroads 8.8 Roadsides 8.9 Utility Sites 9 9.0 WEEDS CONTROLLED 9.1 Annual Weeds 9.2 Perennial Weeds 9.3 Woody Brush and Trees 10 10.0 LIMIT OF WARRANTY AND LIABILITY 1.0 INGREDIENTS ACTIVE INGREDIENT: *Glyphosate, N-(phosphonomethyl)glycine. in the form of its potassium salt ................................................ 44.6% OTHER INGREDIENTS: ............................................................................................................................. 55.4% Master Label MON 78271 Page 84 of 118 100.0% Version: Apr-2002 UNMARKED

III. MAIN LABEL FOR INDUSTRIAL. TURF. AND ORNAMENTAL USES Optional alternate statement: OTHER INGREDIENTS (including 9 percent surfactant): ·Contains 590 grams per litre or 4.9 pounds per U.S. gallon of the active ingredient glyphosate, in the form of its potassium salt. Equivalent to 480 grams per litre or 4.0 pounds per U.S. gallon of the acid, glyphosate. This product is protected by U.S. Patent Nos. 5,688,085; 6,365,551; 5,683,958; 5,703,015; 6,063,733; 6,121,199; and 6.121,200. No license granted under any non-U.S. patent(s). 2.0 IMPORTANT PHONE NUMBERS

1. FOR PRODUCT INFORMATION OR ASSISTANCE IN USING THIS PRODUCT, CALL TOLL· FREE, 1-800·332-311 J.
2. IN CASE OF AN EMERGENCY INVOLVING THIS PRODUCT, OR FOR MEDICAL ASSISTANCE, CALL COLLECT, DAY OR NIGHT. (314 )-694-4000 3.0 PRECAUTIONARY STATEMENTS Keep oul of reach of children. WARNING! AVISO! CAUSES SUBSTANTIAL BUT TEMPORARY EYE INJURY. HARMFUL IF INHALED. Avoid contact with eyes. A void breathing vapor or spray mist. Do not get in eyes or on clothing. Avoid contact with skin or clothing. FIRST AID: Call a poison control center or doctor for treatment advice. IF IN EYES IF ON SKIN OR CLOTHING IF INHALED • Hold eye open and rinse slowly and gently with water for 15 - 20 minutes. • Remove contact lenses if present after the first 5 minutes then continue rinsing eye. • Take off contaminated clothing. • Rinse skin immediately with plenty of water for 15 - 20 minutes. • Move person to fresh air. • If person is not breathing, call 911 or an ambulance, then give ar)ificial respiration, preferably mouth-to· mouth, if possible. Master Label MON 7827) Page 85 of 118 Version: Apr-2002 UNMARKED

III. MAIN LABEL FOR INDUSTRIAL. TURF. AND ORNAMENTAL USES HOT LINE NUMBER Have the pToduct containeT or label with you when calling a poison control centeT or doctoT. OT going fOT tTeatment. This pToduct is identified as [[INSERT BRAND NAMEl. EPA RegistTation No. 524-LGI. You may also contact (314) 694-4000. collect day OT night. fOT emeToency medical treatment infoTmation. DOMESTIC ANIMALS: This pToduct is consideTed to be Telatively nontoxic to dogs and otheT domestic animals; howeveT. ingestion of this product or laTge amounts of fTeshly spTayed vegetation may Tesult in tempoTaTY gastrointestinal irritation (vomiting. diarrhea. colic. etc.). If such symptoms aTe obseTved. provide the animal with plenty of fluids to pTevent dehydTation. Call a veteTinaTian if symptoms peTsist for more than 24 hours. Personal Protective Equipment (PPE) A pplicators and other handlers must wear: long-sleeved shiTt and long pants. shoes. socks. protective eyeweaT. chemical Tesistant gloves (EPA Chemical Resistance Category A) 8 mils in thickness OT gTeateT composed of mateTials such as butyl rubbeT. natuTal TubbeT. neopTene rubbeT. OT nitTile rubber. Follow manufactuTeT's instTuctions fOT cleaning/maintaining PPE (PeTsonal Protective Equipment). If no such instructions for washables. use deteTgent and hot water. Keep and wash PPE sepaTately fTom otheT laundry. DiscaTd clothing and otheT absorbent mateTials that have been dTenched OT heavily contaminated with this product's concentrate. Do not reuse them. When handlers use closed systems. enclosed cabs. or aircraft in a manner that meets the requirements listed in WorkeT PTotection StandaTd (WPS) fOT agTicultuTal pesticides [40 CFR 170.240 (d) (4-6)]. the handleT PPE TequiTements may be Teduced or modified as specified in the WPS. User Safety Recommendations: UseTs should: • Wash hands before eating. drinking, chewing gum. using tobacco. or using the toilet. • Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. 3.2 Environmental Hazards Do not apply directly to water; to areas where surface water is present or 1O intertidal areas below the mean high wateT maTk. Do not contaminate wateT when disposing of equipment washwateTs. 3.3 Physical or Chemical Hazards SpTay solutions of this product should be mixed. stoTed and applied using only stainless steel. aluminum. fibeTglass. plastic OT plastic-lined steel containeTs. Master label MON 78271 Page 86 of 118 Version: Apr·2002 UNMARKED

III. MAIN LABEL FOR INDUSTRIAL, TURF. AND ORNAMENTAL USES DO NOT MIX. STORE OR APPLY THIS PRODUCT OR SPRAY SOLUTIONS OF THIS PRODUCT IN GAL V ANIZED STEEL OR UNLINED STEEL (EXCEPT ST AlNLESS STEEL) CONTAINERS OR SPRAY TANKS. This product or spray solutions of this product react with such containers and tanks to produce hydrogen gas which may form a highly combustible gas mixture. This gas mixture could flash or explode, causing serious personal injury, if ignited by open flame, spark, weIder's torch, lighted cigarette or other ignition source. DIRECTIONS FOR USE It is a violation of Federal law to use this product in any manner inconsistent with its labeling. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulations. Agricultural Use Requirements Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses. and handlers of agricultural pesticides. It contains requirements for training. decontamination. notification. and emergency assistance. It also contains specific instructions and exceptions penaining to the statements on this label about personal protective equipment (PPE) and restricted entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours. PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated. such as plants. soil. or water. is: coveralls. shoes plus socks. protective eyewear and chemical resistant gloves (EPA Chemical Resistance Category A) 8 mils in thickness or greater composed of materials such as butyl rubber. natural rubber, neoprene rubber. or nitrile rubber. Non-Agricultural Use Requirements The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce agricultural plants on farms. forests. nurseries or greenhouses. Keep people and pets off treated areas until spray solution has dried to prevent transfer of this product onto desirable vegetation. 4.0 STORAGE AND DISPOSAL Do no.! contaminate water. foodstuffs. feed or seed by storage or disposal. Keep container closed to prevent spills and contamination. Wastes resulting from the use of this product that cannot be used or chemically reprocessed should be disposed of in a landfill approved for pesticide disposal or in accordance with applicable Federal, state. or local procedures. Master Label MON 78271 Page 87 of 118 Version: Apr-2002 UNMARKED

III. MAIN LABEL FOR INDUSTRIAL. TURF. AND ORNAMENTAL USES Emptied container retains vapor and product residue. Observe all labeled safeguards until container is cleaned, reconditioned, or destroyed. FOR REFILLABLE PORT ABLE CONT AlNERS: Do not reuse this container except for refill in accordance with a valid Monsanto Repackaging or Toll Repackaging Agreement. If not refilled or returned to the authorized repackaging facility, triple rinse container, then puncture and dispose of in a sanitary landfill, or by incineration, or, if allowed by Slate and local authorities, by burning. If burned, stay out of smoke. FOR METAL CONTAINERS (non-aerosol): Triple rinse (or equivalent). Then offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill, or by other procedures approved by state and local authorities. FOR BULK CONT AlNERS: Triple rinse emptied bulk container. Then offer for recycling or reconditioning, or dispose of in a manner approved by state and local authorities. FOR PLASTIC I-WAY CONTAINERS & BOTTLES: Do not reuse container. Triple rinse container. then puncture and dispose of in a sanitary landfill. or by incineration, or. if allowed by state and local authorities, by burning. If burned, stay out of smoke. FOR DRUMS: Do nol reuse container. Return container per the Monsanto container return program. If not returned. triple rinse container, then puncture and dispose of in a sanitary landfill, or by incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of smoke. 5.0 GENERAL INFORMATION (How This Product Works) Product Description: This product is a postemergent, systemic herbicide with no soil residual activity. It gives broad-spectrum control of many annual weeds. perennial weeds, woody brush and trees. It is formulated as a water-soluble Ii uid cootainin surfactant and no additional surfactant is needed or recommended. Optional alternate statement: It is formulated as a water-soluble liquid containing 9 percent surfactant and no' additional surfactant is needed or recommended. Time to Symptoms: This product moves through the plant from the point of foliage contact to and into the root system. Visible effects on most annual weeds occur within 2 to 4 days, but on most perennial weeds may not occur for 7 days or more. Extremely cool or cloudy weather following treatment may slow activity of this product and delay development of visual symptoms. Visible effeclS are a gradual wilting and yellowing of the plant which advances to complete browning of above-ground growth and deterioration of underground plant pans. Mode of Action in Plants: The active ingredient in this product inhibits an enzyme found only in plants and microorganisms that is essentia1 to formation of specific amino acids. Cultural Considerations: Reduced control may result when applications are made to annual or perennial weeds that have been mowed, grazed or cut, and have not been allowed to regrow to the recommended stage for treatment. MaSler Label MON 78271 Page 88 of 118 Version: Apr-2002 UNMARKED

Ill. MAIN LABEL FOR INDUSTRIAL, TURF, AND ORNAMENTAL USES Rainfastness: Heavy rainfall soon after application may wash this product off of the foliage and a repeat application may be required for adequate control. No Soil Activity: Weeds must be emerged at the time of application to be controlled by this product. Weeds germinating from seed after application will not be controlled. Unemerged plants arising from unattached underground rhizomes or rootstocks of perennials will not be affected by the herbicide and will continue to grow. Tank Mixing: This product does not provide residual weed control. For subsequent residual weed control, follow a label-approved herbicide program. Read and carefully observe the cautionary statements and all other information appearing on the labels of all herbicides used. Use according to the most restrictive label directions for each product in the mixture. Buyer and all users are responsible for all loss or damage in connection with the use or handling of mixtures of this product with herbicides or other materials that are not expressly recommended in this label. Mixing this product with herbicides or other materials not recommended on this label may result in reduced performance, Annual Maximum Use Rate: The combined total of all treatments must not exceed 8 quarts of this product per acre per year. The maximum use rates stated throughout this product's labeling apply to this product combined with the use of all other herbicides containing glyphosate or sulfosate as the active ingredient, whether applied as mixtures or separately. Calculate the application rates and ensure that the total use of this and other glyphosate or sulfosate containing products does not exceed stated maximum use rates. ATTENTION A VOID CONTACT OF HERBICIDE WITH FOLIAGE, GREEN STEMS, EXPOSED NON-WOODY ROOTS OR FRUIT OF CROPS (EXCEPT AS SPECIFIED FOR INDIVIDUAL ROUNDUP READY CROPS), DESIRABLE PLANTS AND TREES, BECAUSE SEVERE INJURY OR DESTRUCTION MAY RESULT. AVOID DRIFT. EXTREME CARE MUST BE USED WHEN APPLYING THIS PRODUCT TO PREVENT INJURY TO DESIRABLE PLANTS AND CROPS. Do not allow the herbicide solution to mist, drip, drift or splash onto desirable vegetation since minute quantities of this product can cause severe damage or destruction to the crop. plants or other areas on which treatment was not intended. The likelihood of injury occurring from the use of this product increases when winds are gusty. as wind velocity increases. when wind direction is constantly changing or when there are other meteorological conditions that favor spray drift. When spraying, avoid combinations of pressure and nozzle type that will result in splatter or fine particles (mist) that are likely to drift. AVOID APPLYING AT EXCESSIVE SPEED OR PRESSURE. NOTE: Use of this product in any manner not consistent with this label may result in injury to persons, animals or crops, Or other unintended consequences. 6,0 MIXING Clean sprayer parts immediately after using this product by thoroughly flushing with water. NOTE: REDUCED RESULTS MAY OCCUR IF WATER CONT AlNING SOIL IS USED, SUCH AS VISIBLY MUDDY WATER OR WATER FROM PONDS AND DITCHES THAT IS NOT CLEAR. 6,} Mixing with Water Master Label MON 78271 Page 89 of 118 Version: Apr·2002 UNMARKED

" III. MAIN LABEL FOR INDUSTRIAL, TURF, AND ORNAMENTAL USES This product mixes readily with water. Mix spray solutions of this product as follows: Fill the mixing or spray tank with the required amount of water. Add the recommended amount of this product near the end of the filling process and mix well. Use caution to avoid siphoning back into the carrier source. Use approved anti­ back-siphoning devices where required by state or local regulations. During mixing and application, foaming of the spray solution may occur. To prevent or minimize foam, avoid the use of mechanical agitators, terminate by-pass and return lines at the bottom of the tank and, if needed, use an approved anti-foam or defoaming agent. 6,2 Tank Mixing Procedure When tank mixing, read and carefully observe label directions, cautionary statements and all information on the labels of all products used. Add the tank-mix product to the tank as directed by the labe. Maintain agitation and add the recommended amount of this product. Maintain good agitation at all times until the contents of the tank are sprayed. If the spray mixture is allowed to settle, thorough agitation may be required to resuspend the mixture before spraying is resumed. Keep by-pass Hne on or near the bottom of the tank to minimize foaming. Screen size in nozzle or line strainers should be no finer than 50 mesh. Always predetermine the compatibility of labeled tank mixtures of this product with water carrier by mixing small proportional quantities in advance. Refer to the "TANK MIXING" section of "GENERAL INFORMATION" for additional precautions. 6,3 Mixing for Hand·Held Sprayers Prepare the desired volume of spray solution by mixing the amount of this product in water as shown in the following table: Sl!ra~ Solution Amount of [INSERT BRAND NAME] Desired Volume 0.5% 0.8% 1% 1.7% 5% 8% I gal 1/20z 10z 1-1130z 20z 6-112 oz 100z 25 gal 1 pt 1.6 pt I qt 1-112 qt 5 qt 2 gal 100 gal 2 qt 3.2 qt 1 gal 1.7 gal 8 gal 8 gal 2 tablespoons = 1 fluid ounce For use in backpack, knapsack or pump-up sprayers, it is suggested that the recommended amount of this product be mixed with water in a larger container. Fill sprayer with the mixed solution. 6.4 Colorants or Dyes Agriculturally approved colonints or marking dyes may be added to this product. Colorants or dyes used in spray solutions of this product may reduce performance, especially at lower rates or dilution. Use colorants or dyes according to the manufacturer's recommendations. 7,0 APPLICA TION EQUIPMENT AND TECHNIQUES Do not apply this product through any type of irrigation system. Master Label MON 78271 Page 90 of 118 Version: Apr-2002 UNMARKED

III. MAIN LABEL FOR INDUSTRIAL. TURF. AND ORNAMENTAL USES APPLY THESE SPRAY SOLUTIONS IN PROPERLY MAINTAINED AND CALIBRATED EQUIPMENT CAPABLE OF DELIVERING DESIRED VOLUMES. SPRA Y DRIFT MANAGEMENT A VOID DRIFT. EXTREME CARE MUST BE USED WHEN APPLYING THIS PRODUCT TO PREVENT INJURY TO DESIRABLE PLANTS AND CROPS. Do not allow the herbicide solution to mist, drip, drift or splash onto desirable vegetation since minute quantities of this product can cause severe damage or destruction to the crop. plants or other areas on which treatment was not intended. Avoiding spray drift at the application site is the responsibility of the applicator. The interaction of many equipment and weather-related factors determine the potential for spray drift. The applicator and the grower are is responsible for considering all these factors when mak.ing decisions. AERIAL SPRAY DRIFT MANAGEMENT The following drift management requirements must be followed to avoid off-target drift movement from aerial applications to agricultural field crops. I. The distance of the outermost nozzles on the boom must not exceed 3/4 the length of the wingspan or rotor. 2. Nozzles must always point backward parallel with the air stream and never be pointed downwards more than 45 degrees. Where states have more stringent regulations. they should be observed. Importance of droplet size The most effective way to reduce drift potential is to apply large droplets. The best drift management strategy is to apply the largest droplets that provide sufficient coverage and control. Applying larger droplets reduces drift potential. but will not prevent drift if applications are made improperly. or under unfavorable environmental conditions (see the Wind, Temperature and Humidity, and Temperature Inversion sections of this label). Controlling droplet size • Volume: Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with the higher rated flows produce larger droplets. • Pressure: Use the lower spray pressures recommended for the nozzle. Higher pressure reduces droplet size and does not improve canopy penetration. When higher flow rates are needed, use higher flow rate nozzles instead of increasing pressure. • Number of nozzles: Use the minimum number of nozzles that provide uniform coverage. • Nozzle orientation: Orienting nozzles so that the spray is released backwards. parallel to the airstream. will produce larger droplets than other orientations. Significant deflection from the hllfizontal will reduce droplet size and increase drift potential. MaSler Label MON 78271 Page 91 of 118 Version: Apr-2002 UNMARKED

III. MAIN LABEL FOR INDUSTRIAL, TURF, AND ORNAMENTAL USES • Nozzle type: Use a nozzle type that is designed for the intended application. With most nozzle types. narrower spray angles produce larger droplets. Consider using low-drift nozzles. Solid stream nozzles oriented straight back produce larger droplets than other nozzle types. • Boom Length: For some use patterns, reducing the effective boom length to less than 3/4 of the wingspan or rotor length may further reduce drift without reducing swath width. • Application Height: Applications should not be made at a height greater than 10 feet above the top of the largest plants unless a greater height is required for aircraft safety. Making applications at the lowest height that is safe reduces the exposure of the droplets to evaporation and wind. Swath Adjustment When applications are made with a crosswind. the swath will be displaced downward. Therefore. on the up and downwind edges of the field. the applicator must compensate for this displacement by adjusting the path of the aircraft upwind. Swath adjustment distance should increase. with increasing drift potential (higher wind. smaller droplets. etc.). Wind Drift potential is lowest between wind speeds of 2 to 10 mph. However, many factors. including droplet size and equipment type determine drift potential at any given speed. Application should be avoided below 2 mph due to variable wind direction and high inversion potential. NOTE: Local terrain can influence wind patterns. Every applicator should be familiar with local wind patterns and how they affect drift. Temperature and Humidity When making applications in low relative humidity, set up equipment to produce larger droplets to compensate for evaporation. Droplet evaporation is most severe when conditions 3re both hot and dry. Temperature inversions Applications should not occur during a temperature inversion because drift potential is high. Temperature inversions restrict vertical air mixing. which causes small suspended droplets to remain in a concentrated cloud. This cloud can move in unpredictable directions due to the light variable winds common during inversions. . Temperature inversions are characterized by increasing temperatures with altitude and are common on nights with limited cloud cover and light to no wind. They begin to form as the sunsets and often continue into the morning. Their presence can be indicated by ground fog; however, if fog is not present, inversions can also be identified by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion. while smoke that moves upward and rapidly dissipates indicates good vertical air mixing. Sensitive areas This product should only be applied when the potential for drift to adjacent sensitive areas (e.g. residential areas. bodies of water. known habitat for threatened or endangered species. non-target crops) is minimal (e.g. when wind is blowing away fiom the sensitive areas). 7.1 Aerial Equipment DO NOT APPLY THIS PRODUCT USING AERIAL SPRAY EQUIPMENT EXCEPT UNDER CONDITIONS AS SPECIFIED WITHIN THIS LABEL. Master Label MON 78271 Page 92 of 118 Version: Apr-2002 UNMARKED

III. MAIN LABEL FOR INDUSTRIAL, TURF, AND ORNAMENTAL USES FOR AERIAL APPLICATION IN CALIFORNIA, REFER TO THE FEDERAL SUPPLEMENTAL LABEL FOR AERIAL APPLICATIONS IN THAT ST ATE FOR SPEClFIC INSTRUCTIONS, RESTRICTIONS AND REQUIREMENTS, This product plus, dicamba tank mixtures may not be applied by air in California. TO PREVENT INJURY TO ADJACENT DESIRABLE VEGETATION, APPROPRIATE BUFFER ZONES MUST BE MAJNTAINED. Avoid direct application to any body of water. Use the recommended rates of this herbicide in 3 to 25 gallons of water per acre. Drift control additives may be used. When a drift control additive is used, read and carefully observe the cautionary statements and all other information appearing on the additive label. Ensure uniform application --To avoid streaked, uneven or overlapped application. use appropriate marking devices. PROLONGED EXPOSURE OF THIS PRODUCT TO UNCOATED STEEL SURFACES MAY RESULT IN CORROSION AND POSSIBLE FAILURE OF THE PART. The maintenance of an organic coating (paint) which meets aerospace specification MIL-C-38413 may prevent corrosion. To prevent corrosion of exposed parts, thoroughly wash aircraft after each day of spraying to remove residues of this product accumulated during spraying or from spills. Landing gear is most susceptible. 7,2 Ground Broadcast Equipment Use the recommended rates of this product in 3 to 40 gallons of water per acre as a broadcast spray unless otherwise specified. As density of weeds increases, spray volume should be increased within the recommended range to ensure complete coverage. Carefully select proper nozzles to avoid spraying a fine mist. For best results with ground application equipment, use flat-fan nozzles. Check for even distribution of spray droplets. 7,3 Hand-Held or High-Volume Equipment Apply to foliage of vegetation to be controlled. For applications made on a spray-to-wet basis, spray coverage should be uniform and complete. Do not spray to the point of runoff. Use coarse sprays only. For control of weeds listed in the "ANNUAL WEEDS" section of "WEEDS CONTROLLED", apply a 0,5 percent solution of this product to weeds less than 6 inches in height or runner length. For annual weeds over 6 inches tall, or unless otherwise specified, use a 0.8 percent solution. Apply prior to seedhead formation in grass or bud formation in broad leaf weeds. For best results. use a 1.7 percent solution on harder-la-control perennials. such as Bermudagrass. dock. field bindweed, hemp dogbane, milkweed and Canada thistle. For low volume directed spray applications, use a 5 to 8 percent solution of this product for control or partial control of annual weeds, perennial weeds, or woody brush and trees. Spray coverage should be uniform with at least 50 percent of the foliage contacted. Coverage of the top one half of the plant is important for best results. To ensure adequate spray coverage, spray both sides of large or tall woody brush and trees, when foliage is thick and dense, or where there are multiple sprouts. 7,4 Selective Equipment Masler Label MON 78271 Page 93 of 118 Version: Apr-2002 UNMARKED

III. MAIN LABEL FOR INDUSTRIAL, TURF, AND ORNAMENTAL USES This product may be applied through recirculating spray systems, shielded applicators, hooded sprayers. wiper applicators or sponge bars, after dilution and thorough mixing with water. to listed weeds growing in any oon­ crop site specified on this label. A recirculating spray system directs the spray solution onto weeds growing above desirable vegetation. while spray solution not intercepted by weeds is collected and returned to the spray tank for reuse. A VOID CaNT ACT OF HERBICIDE WITH DESIRABLE VEGETATION, AS SERIOUS INJURY OR DEATH IS LIKELY TO OCCUR. Applicators used above desired vegetation should be adjusted so that the lowest spray stream or wiper contact point is at least 2 inches above the desirable vegetation. Droplets, mist. foam or splatter of the herbicide solution settling on desirable vegetation is likely to result in discoloration. stunting or destruction. Better results may be obtained when more of the weed is exposed to the herbicide solution. Weeds not contacted by the herbicide solution will not be affected. This may occur in dense clumps. severe infestations or when the height of the weeds varies so that not all weeds 3re contacted. In these instances. repeat treatment may be necessary. Shielded and hooded applicators A shielded or hooded applicator directs the herbicide solution onto weeds. while shielding desirable vegetation from the herbicide Use nozzles that provide uniform coverage within the treated area. Keep shields on these sprayers adjusted to protect desirable vegetation. EXTREME CARE MUST BE EXERCISED TO AVOID CONTACT OF HERBICIDE WITH DESIRABLE VEGETATION. Wiper applicators and sponge bars A wiper or sponge applicator applies the herbicide solution onto weeds by rubbing the weed with an absorbent material containing the herbicide solution. Equipment must be designed. maintained and operated to prevent the herbicide solution from contacting desirable vegetation. Operate this equipment at ground speeds no greater than 5 mph. Performance may be improved by reducing speed in areas of heavy weed infestations to ensure adequate wiper saturation. Better results may be obtained if 2 applications are made in opposite directions. Avoid leakage or dripping onto desirable vegetation. Adjust height of applicator to ensure adequate contact with weeds. Keep wiping surfaces clean. Be aware that. on sloping ground. the herbicide solution may migrate. causing dripping on the lower end and drying of the wicks on the upper end of a wiper applicator. Do not use wiper equipment when weeds are wet. Mix only the amount of solution to be used during a I-day period. as reduced activity may result from use of leftover solutions. Clean wiper parts immediately after using this product by thoroughly flushing with water. For Rope or Sponge Wick Applicators--Solutions ranging from 25 to 50 percent of this product in water may be used. For Panel Applicators and pressure-feed systems--Solutions ranging from 25 to 100 percent of this product in water may be used. When applied as recommended. this product CONTROLS the following weeds: Corn. volunteer Panicum. Texas Rye,common Masler Label MON 78271 Sicklepod Spanishneedles Starbur. bristly Page 94 of 118 Version: Apr-2002 UNMARKED

-----'--"' ... --- .. Ill. MAIN LABEL FOR INDUSTRIAL. TURF. AND ORNAMENTAL USES Shattercane When applied as recommended. this product SUPPRESSES the following weeds: Beggarweed. Florida Bermudagrass Dogbane. hemp Dogfennel Guineagrass Johnsongrass Milkweed Nightshade. silverleaf Pigweed. redroot 7.5 Injection Systems Ragweed. common Ragweed. giant Smutgrass Sunflower Thistle. Canada Thistle. musk Vaseygrass Velvetleaf This product may be used in aerial or ground injection spray systems. It may be used as a liquid concentrate or diluted prior to injecting into the spray stream. Do not mix this product with the undiluted concentrate of other products when using injection systems unless specifically recommended. 7.6 CDA Equipment The rate of this product applied per acre by controlled droplet application (CDAl equipment must not be less than the amount recommended in this label when applied by conventional broadcast equipment. For vehide­ mounted CDA equipment. apply 2 to 15 gallons of water per acre. CDA equipment produces a spray pattern that is not easily visible. Extreme care must be exercised to avoid spray or drift contacting the foliage Or any other greln tissue of desirable vegetation. as damage or destruction is likely to result. 8.0 SITE AND USE RECOMMENDA TlONS Detailed instructions follow alphabetically, by site. Unless otherwise specified. applications may be made to control any weeds listed in the annual. perennial and woody brush tables. Refer also to the "SELECTIVE EQUIPMENT" section. 8.1 Cut Stumps Cut stump treatments may be made on any site listed on this label. This product will control many types of woody brush and tree species. some of which are listed below. Apply this product using suitable equipment to ensure coverage of the entire cambium. Cut trees or resprouts close to the soil surface. Apply a 50 to 100 percent solution of this product to the freshly-cut surface immediately after cutting. Delays in application may result in reduced performance. For best results. applications should be made during periods of active growth and full leaf expansion. Alder Eucalypius Madrone Oak Reed. giant Saltcedar Sweetgum Tan oak Willow DO NOT MAKE CUT STUMP APPLICA nONS WHEN THE ROOTS OF DESIRABLE WOODY BRUSH OR TREES MAYBE GRAFTED TO THE ROOTS OF THE CUT STUMP. Some sprouts. stems. or trees may share the same root system. Adjacent trees having a similar age. height and spacing may signal shared roots. Master l3bel MON 78271 Page 95 of 118 Version: Apr-2002 UNMARKED

. ,,,". III. MAIN LABEL FOR INDUSTRIAL, TURF. AND ORNAMENTAL USES Whether grafted or shared, injury is likely to occur to non-treated stems/trees when one or more trees sharing common roots are treated. 8,2 Forestry site preparation This product is recommended for the control or partial control of woody brush. trees and herbaceous weeds in forestry. This product is also recommended for use in preparing or establishing wildlife openings within these sites and maintaining logging roads. This product is recommended for use in site preparation prior to planting any tree species, including Christmas trees. eucalyptus. hybrid tree cultivars and silvicultural nursery sites. APPLICA TION RATES AND TIMING APPLICATION BROADCAST Aerial Ground SPRAY -TO-WET Handgun. Backpack. LOW VOLUME DIRECTED SPRAY Handgun. Backpack, [INSERT BRAND NAME] I. 7 to 7,5 quarts per acre 1.7 to 7.5 quarts per acre 0.8 to 1.7 percent by volume 5 to 8 percent by volume SPRAY VOLUME GAlJA 5to 30 10 to 60 spray-to-wet partial coverage" "For low volume directed spray applications. coverage should be uniform with at least 50 percent of the foliage contacted. Coverage of the top one-half of the plant is important for best results. Use higher rates of this product within the recommended range for control or partial control of woody brush. trees and hard-to-control perennial herbaceous weeds. For best results. apply to actively growing woody brush and trees after full leaf expansion and before fall color and leaf drop. Increase rates within the recommended range for control of perennial herbaceous weeds any time after emergence and before seedheads. flowers or berries appear. Use the lower rates of this product within the recommended range for control of annual herbaceous weeds and actively growing perennial herbaceous weeds after seedheads. flowers or berries appear. Apply to the foliage of actively growing annual herbaceous weeds any time after emergence. This product has no herbicidal or residual activity in the soil. Where repeat applications are necessary. do not exceed 8 quarts of this product per acre per year. TANK MIXTURES Master Label MON 7827 J Page 96 of 118 Version: Apr-2002 UNMARKED

III. MAIN LABEL FOR INDUSTRIAL, TURF, AND ORNAMENTAL USES 
Tank mixtures of this product may be used to increase the spectrum of vegetation controlled. When tank 
mixing, read and carefully observe the label claims, cautionary statements and all information on the labels of 
all products used. Use according to the most restrictive precautionary statements fOT each product in the 
mixture. 
NOTE: For forestry site preparation, make sure the tank-mix product is approved for use prior to planting the 
desired species. Observe planting interval restrictions. 
Any recommended rate of this product may be used in a tank mix with the following products for forestry site 
preparation. 
PRODUCT BROADCAST RATE 
Arsenal Applicators Concentrate 2 to 16 fluid ounces per acre 
Escort™ 112 to 3 112 fluid ounce per acre 
ChopperTM 4 to 32 fluid ounce per acre 
Garlon 4 I to 4 quarts per acre 
OustTM 1 to 4 ounces per acre 
PRODUCT SPRAY -TO- WET RATES 
Arsenal Applicators Concentrate 1132 to 112 percent by volume 
PRODUCT LOW VOLUME DIRECTED SPRAY RATES 
Arsenal Applicators Concentrate 1/8 to 112 percent by volume 
For control of herbaceous weeds. use the lower recommended tank mixture rates. For control of dense stands 
or tough-to-control woody brush and trees, use the higher recommended rates. 
Do not apply this product as an over-the-top broadcast spray for forestry conifer or hardwood release. 
8,3 General Non·crop Areas and Industrial Sites 
Use in areas such as airports. Christmas tree farms, ditch banks, dry ditches, dry canals, fencerows, golf 
courses, industrial sites. lumber yards. manufacturing sites. office complexes. ornamental nurseries, parking 
areas, petroleum tank farms and pumping installations, railroads, roadsides, sod or turf seed farms, storage 
areas, substations. warehouse areas, other public areas, and similar industrial and non-crop sites. 
General weed control, Trim.and·edge and Bare ground 
This product may be used in general non-crop areas. It may be applied with any application equipment 
described in this label. This product may be used to trim-and-edge around objects in non-<;rop sites, for spot 
treatment of unwanted vegetation and to eliminate unwanted weeds growing in established shrub beds or 
ornamental plantings. This product may be used prior to planting an area to ornamentals, flowers, turfgrass (sod 
or seed), or prior to laying asphalt or beginning construction projects. 
Master Label MON 7827 J Page 97 of 118 Version: Apr-2002 
UNMARKED

~ 
III. MAIN LABEL FOR INDUSTRIAL. TURF. AND ORNAMENTAL USES 
Repeated applications of this product may be used. as weeds emerge. to maintain bare ground. 
This product may be tank mixed with the following products. Refer to these products' labels for approved non­
crop sites and application rates. 
ARSENALTM PLATEAlJTM 
CLARITY PRINCEpTMDF 
BARRICADETM 65WG PRINCEpTM LIQUID 
DIURON RONST ARTM 50WP 
ENDURANCETM SAHARNM 
ESCORT'M SIMAZlNE 
GARLONTM3A SURFLANTM 
GARLON4 TELARTM 
KARMEX'MDF VANQUISHTM 
KROV ARTM I DF 2,4-D 
MANAGE® 
OUST 
PENDULUMTM 3.3 EC 
PENDULUM WDG 
This product plus dicamba tank mixtures may not be applied by air in California. 
When applied as a tank mixture for bare ground. this product provides control of the emerged annual weeds 
and control or partial control of emerged perennial weeds. woody brush and trees. 
For control or partial control of the following perennial weeds. apply 24 to 48 fluid ounces of this product plus 
2 to 4 ounces of Oust per acre. 
Bahiagrass 
Bermudagrass 
Broomsedge 
Dallisgrass 
Dock. curly 
Dogfennel 
Fescue. tall 
Chemical mowing - Perennials 
Johnsongrass 
Poorjoe 
Quackgrass 
Vaseygrass 
Vervain. blue 
This product will suppress perennial grasses listed in this section to serve as a substitute for mowing. Use 6 
fluid ounces of this product per acre when treating ta11 fescue. fine fescue. orchardgrass, quackgr3ss or reed 
canarygrass covers. Use 5 fluid ounces of this product per acre when treating Kentucky bluegrass. Apply 
treatments in 10 to 40 gallons of spray solution per acre. 
Use only in areas where some temporary injury or discoloration of perennial grasses can be tolerated. 
Chemical mowing - Annuals· 
For growth suppression of some annual grasses. such as annual ryegrass, wild barley and wild oats growing in 
coarse turf on roadsides or other industrial areas, apply 3 to 4 fluid ounces of this product in 10 to 40 gallons of 
spray solution per acre. Applications should be made when annual grasses are actively growing and before the 
seed heads are in the boot stage of development. Treatments may cause injury to the desired grasses. 
Master Label MON 78271 Page 98 of 118 Version: Apr-2002 
UNMARKED

Ill. MAIN LABEL FOR INDUSTRIAL, TURF, AND ORNAMENTAL USES 
BTOm"S species and Medusahead in Pastures and Rangelands 
Bromus species. This product may be used to treat downy brome (Bromus teetorum), Japanese brome 
(Brol11us japonicus), soft chess (Brolllus 11101iis) and cheatgrass (Bromus secalinus) found in industrial, 
rangeland and pasture sites. Apply 6 to 12 fluid ounces of this product per acre on a broadcast basis. 
For best results, treatment should coincide with early seedhead emergence of the most mature plants. Delaying 
the application until this growth stage will maximize the emergence of other weedy grass flushes. Applications 
should be made to the same site each year until seed banks are depleted and the desirable perennial grasses can 
become reestablished on the site. 
Medusahead. To treat medusahead, apply 12 fluid ounces of this product per acre as soon as plants are 
actively growing, and prior to the 4·leaf stage. Applications may be made in the fall or spring. 
Applications to brome and medusahead may be made using ground or aerial equipment. Aerial applications for 
these uses may be made using fixed wing or helicopter equipment. For aerial applications, apply in 2 to 10 
gallons of water per acre. For applications using ground equipment. apply in 10 to 20 gallons of water per acre. 
When applied as directed in this label. there are no grazing restrictions. 
Dormant turfgrass 
This product may be used to control or suppress many winter annual weeds and tall fescue for effective release 
of dormant Bermudagrass and bahiagrass turf. Treat only when turf is dormant and prior to spring greenup. 
Apply 6 to 48 fluid ounces of this product per acre. Apply the recommended rates in 10 to 40 gallons of water 
per acre. Use only in areas where Bermudagrass or bahiagrass are desirable ground covers and where some 
temporary injury or discoloration can be tolerated. 
Treatments in excess of 12 fluid ounces per acre may result in injury or delayed greenup in highly maintained 
areas. such as golf courses and lawns. DO NOT apply tank mixtures of this product plus Oust in highly 
maintained turfgrass areas. For further uses, refer to the "ROADSIDES" section of this label, which gives rates 
for dormant Bermudagrass and bahiagrass treatments. 
Actively growing Bermudagrass 
This product may be used to control or partially control many annual and perennial weeds for effective release 
of actively growing Bermudagrass. DO NOT apply more than 12 fluid ounces of this product per acre in highly 
maintained turfgrass areas. DO NOT apply tank mixtures of this product plus Oust in highly maintained 
turfgrass areas. For further uses, refer to the "ROADSIDES" section of this label. which gives rates for actively 
growing Bermudagrass treatments. Use only in areas where some temporary injury or discoloration can be 
tolerated. 
Turfgrass renol'ation, seed, or sod production 
This product controls most existing vegetation prior to renovating turfgrass areas or establishing turfgrass 
grown for seed or sad. For maximum control of existing vegetation, delay planting or sodding to determine if 
any regrowth from escaped underground plant parts occurs. Where repeat treatments are necessary. sufficient 
regrowth must be attained prior to application. For warm·season grasses such as Bermudagrass, summer or fall 
applications provide the best control. Where existing vegetation is growing under mowed turfgr3ss 
management, apply this product after omitting at least one regular mowing to allow sufficient growth for good 
interception of the spray. 
Master Label MON 78271 Page 99 of 118 Version: Apr-2002 
UNMARKED

III. MAIN LABEL FOR INDUSTRIAL. TURF. AND ORNAMENTAL USES 
Do not disturb soil or underground plant pans before treatment. Tillage or renovation techniques such as 
vertical mowing. coring or slicing should be delayed for 7 days after application to allow translocation into 
underground plant pans. 
Desirable turfgrasses may be planted following the above procedures. 
Hand-held equipment may be used for spot treatment of unwanted vegetation growing in existing turfgrass. 
Broadcast or hand-held equipment may be used to control sod remnants or other unwanted vegetation after sod 
is harvested. 
Do not feed or graze turfgrass grown for seed or sod production for 8 weeks following application. 
8.4 Habitat Management 
Habitat restoration and management 
This product may be used to control exotic and other undesirable vegetation in habitat management and natural 
areas. including rangeland and wildlife refuges. Applications can be made to allow recovery of native plant 
species. prior to planting desirable native species. and for similar broad-spectrum vegetation control 
requirements. Spot treatments can be made to selectively remove unwanted plants for habitat management and 
enhancement. 
Wildlife food plots 
This product may be used as a site preparation treatment prior to planting wildlife food plots. Any wildlife food 
species may be planted after applying this product. or native species may be allowed to repopulate the area. If 
tillage is needed to prepare a seedbed. wait 7 days after application before tillage to allow translocation into 
underground plant pans. 
8.5 Injection and Frill (Woody Brush and Trees) 
This product may be used to control woody brush and trees by injection or frill applications. Apply this product 
using suitable equipment that must penetrate into the living tissue. Apply the equivalent of 1125 fluid ounce (I 
mL) of this product per each 2 to 3 inches of trunk diameter at breast height (DBH). This is best achieved by 
applying a 50 to 100 percent concentration of this product either to a continuous frill around the tree or as cuts 
evenly spaced around the tree below all branches. As tree diameter increases in size. better results are achieved 
by applying diluted material to a continuous frill or more closely spaced cuttings. Avoid application techniques 
that allow runoff 10 occur from frilled or cut areas in species that exude sap freely. In species such as this. make 
the frill or cuts at an oblique angle to produce a cupping effect and use a 100 percent concentration of this 
product. For best results. application should be made during periods of active growth and after full leaf 
expansion. This product will control many species. some of which are listed below: 
Control 
Oak 
Poplar 
Sweetgum 
Sycamore 
Partial Control 
Black gum 
Dogwood 
Hickory 
Maple. red 
8.6 
Ornamentals, Plant Nurseries, and Christmas Trees 
Post-directed, Trim-and-edge 
Master Label MON 78271 Page 100 of 118 Version: Apr·2002 
UNMARKED 
"1/"1

III. MAIN LABEL FOR INDUSTRIAL, TURF, AND ORNAMENTAL USES 
This product may be used as a post-directed spray around established woody ornamental species such as 
arborvitae, azalea, boxwood, crabapple, eucalyptus, euonymus, fir, douglas fir, jojoba, hollies, lilac, magnolia, 
maple, oak, poplar, privet, pine, spruce and yew. This product may also be used to trim and edge around trees, 
buildings, sidewalks and roads, potted plants and other objects in a nursery setting. 
Desirable plants may be protected from the spray solution by using shields or coverings made of cardboard or 
other impermeable material. THIS PRODUCT IS NOT RECOMMENDED FOR USE AS AN OVER-THE­
TOP BROADCAST SPRAY IN ORNAMENTALS AND CHRISTMAS TREES. Care must be exercised to 
avoid contact of spray, drift or mist with foliage or green bark of established ornamental species. 
Site preparation 
This product may be used prior to planting any ornamental, nursery or Christmas tree species. 
Wipers 
This product may be used through wick or other suitable wiper applicators to control or partially control 
undesirable vegetation around established eucalyptus or poplar trees. See the "SELECTIVE EQUIPMENT" 
section of this label for further information about the proper use of wiper applicators. 
Greenhouse/Shadehouse 
This product may be used to control weeds growing in and around greenhouses and shadehouses. Desirable 
vegetation must not be present during application and air circulation fans .must be turned off. Do not use in 
residential greenhouses. 
8.7 Railroads 
All of the instructions in the "GENERAL NON-CROP AREAS AND INDUSTRIAL SITES" section apply to 
railroads. 
Bare ground, Ballast and Shoulders, Crossings, and Spot Treatment 
This product may be used to maintain bare ground on railroad ballast and shoulders. Repeat applications of this 
product may be used, as weeds emerge. to maintain bare ground. This product may be used to control tall­
growing weeds to improve line-of-sight at railroad crossings and reduce the need for mowing along rights-of­
way. For crossing applications, up to 80 gallons of spray solution per acre may be used. This product may be 
lank mixed with the following products for ballast, shoulder, spot. bare ground and cTossing treatments: 
Brush control 
ARSENAL 
CLARITY 
DlURON 
ESCORT 
GARLON3A 
GARLON4 
HYVART·X 
KROVARIDF 
OUST 
SAHARA 
SPIKE T• 
TELAR 
VANQUISH 
2,4-D 
This product may be used to control woody brush and trees on railroad rights-of-way. Apply 2.8 to 8 quarts of 
this product per acre as a broadcast spray. using boom-type or boomless nozzles. Up to 80 gallons of spray 
solution per acre may be used. Apply a 0.8 to 1.7 percent solution of this product when using high-volume 
Master Label MON 7827) Page 101 of 118 Version: Apr-2002 
UNMARKED

111. MAIN LABEL FOR INDUSTRIAL. TURF. AND ORNAMENTAL USES 
spray-to-wet applications. Apply a 5 to 8 percent solution of this product when using low volume directed 
sprays for spot treatment. This product may be mixed with the following products for enhanced control of 
woody brush and trees: 
Bermudagrass release 
ARSENAL 
ESCORT 
GARLON3A 
GARLON4 
TORDONT"K 
This product may be used to control or partially control many annual and perennial weeds for effective release 
of actively growing Bermudagrass. Apply 12 to 36 fluid ounces of this product in up to 80 gallons of spray 
solution per acre. Use the lower rate when treating annual weeds below 6 inches in height (or runner length). 
Use the higher rate as weeds increase in size or as they approach flower or seedhead formation. These rates will 
also provide partial control of the following perennial species: 
Bahiagrass 
Bluestem. silver 
Fescue. tall 
Johnsongrass 
Trumpetcreeper 
Vaseygrass 
This product may be tank-mixed with Oust. If tank-mixed. use no more than 12 to 36 fluid ounces of this 
product with I to 2 ounces of Oust per acre. Use the lower rates of each product to control annual weeds less 
than 6 inches in height (or runner length) that are listed in this label and the Oust label. Use the higher rates as 
annual weeds increase in size and approach the flower or seed head stages. These rates will also provide partial 
control of the following perennial weeds: 
Bahiagrass 
Blackberry 
Bluestem, silver 
Broomsedge 
Dallisgrass 
Dewberry 
Dock. curly 
Dogfennel 
Fescue. tall 
Johnsongrass 
Poorjoe 
Raspberry 
T rumpetcreeper 
Vaseygrass 
Vervain. blue 
Use only on well-established Bermudagrass. Bermudagrass injury may result from the treatment. but regrowth 
will occur under moist conditions. Repeat applications in the same season are not recommended. since severe 
injury may occur. 
8.8 Roadsides 
All of the instructions in the "GENERAL NON-CROP AREAS AND INDUSTRIAL SITES" section apply to 
roadsides. 
Shoulder treatments 
This product may be used on road shoulders. It may be applied with boom sprayers. shielded boom sprayers. 
high-volume off-center nozzles. hand-held equipment. and similar equipment. 
Guardrails and other obstacles to mowing 
This product may be used to control weeds growing under guardrails and around signposts and other objects 
along the roadside. 
MaSler Label MON 7827) Page 102 of 118 Version: Apr-2002 
UNMARKED

III. MAIN LABEL FOR INDUSTRIAL, TURF, AND ORNAMENTAL USES 
Spot treatment 
This product may be used as a spot treatment to control unwanted vegetation growing along roadsides. 
Tank mixtures 
This product may be tank-mixed with the following products for shoulder, guardrail, spot and bare ground 
treatments: 
CLARITY 
DIURON 
ENDURANCE 
ESCORT 
KROVARIDF 
OUST 
PENDULUM 3.3 EC 
PENDULUM WDG 
PRINCEPDF 
PRINCEP LIQUID 
RONST AR 50WP 
SAHARA 
SIMAZINE 
SURFLAN 
TELAR 
VANQUISH 
2,4-D 
See the "GENERAL NON-CROP AREAS AND INDUSTRIAL SITES" section of this label for general 
instructions for tank mixing. 
Release of Bermudagrass or Bahiagrass 
Dormant applications 
This product may be used to control or partially control many winter annual weeds and tall fescue for effective 
release of dormant Bermudagrass or bahiagrass. Treat only when turf is dormant and prior to spring greenup. 
This product may also be tank-mixed with Oust for residual control. Tank mixtures of this product with Oust 
may delay greenup. 
For best results on winter annuals, treat when plants are in an early growth stage (below 6 inches in height) after 
most have germinated. For best results on tall fescue, treat when fescue is at or beyond the 4- to 6-leaf stage. 
Apply 6 to 48 fluid ounces of this product per acre alone or in a tank mixture with 1/4 to I ounce per acre of 
Oust. Apply the recommended rates in 10 to 40 gallons of water per acre. Use only in areas where 
Bermudagrass or bahiagrass are desirable ground covers and where some temporary injury or discoloration can 
be tolerated. To avoid delays in greenup and minimize injury. add no more than 1 ounce of Oust per acre on 
Bermudagrass and no more than 1/2 ounce of Oust per acre on bahiagrass and avoid treatments when these 
grasses are in a semi~dormant condition. 
Actively growing Bermudagrass 
This product may be used to control or partially control many annual and perennial weeds for effective release 
of actively growing Bermudagrass. Apply 12 to 36 fluid ounces of this product in JO to 40 gallons of spray 
solution per acre. Use the lower rate when treating annual weeds below 6 inches in height (or runner length). 
Use the higher rate as weeds increase in size or as they approach flower or seedhead formation. These rates will 
also provide partial control of ihe following perennial species: 
Bahiagrass 
Bluestem, silver 
Fescue, tall 
Johnsongrass 
Trumpetereeper 
Vaseygrass 
This producl may be lank-mixed wilh Oust. If lank-mixed, use no more Ihan 121024 fluid ounces oflhis 
producl wilh 1 102 ounces of OUSI per acre. Use Ihe lower rales of each producl to conlrol annual weeds less 
Master Label MON 78271 Page 103 of 118 Version: Apr-2002 
UNMARKED

III. MAIN LABEL FOR INDUSTRIAL. TURF. AND ORNAMENTAL USES 
than 6 inches in height (or runner length) that are listed in this label and the Oust label. Use the higher rates as 
annual weeds increase in size and approach the flower or seed head stages. These rates will also provide panial 
control of the following perennial weeds: 
Bahiagrass 
Bluestem, silver 
Broomsedge 
Dallisgrass 
Dock, curly 
Dogfennel 
Fescue, tall 
Johnsongrass 
Poorjoe 
Trumpetcreeper 
Vaseygrass 
Vervain, blue 
Use only on well-established Bermudagrass. Bermudagrass injury may result from the treatment, but regrowth 
will occur under moist conditions. Repeat applications of the tank mix in the same season are not 
recommended. since severe injury may occur. 
Actively growing bahiagrass 
For suppression of vegetative growth and seed head inhibition of bahiagrass for approximately 45 days, apply 4 
fluid ounces of this product in 10 to 40 gallons of water per acre. Apply I to 2 weeks after full greenup or after 
mowing to a uniform height of 3 to 4 inches. This application must be made prior to seedhead emergence. 
For suppression up to 120 days, apply 3 fluid ounces of this product per acre, followed by an application of 2 to 
3 fluid ounces per acre about 45 days later. Make no more than 2 applications per year. 
A tank mixture of this product plus Oust may be used. Apply 4 fluid ounces of this product plus 114 ounce of 
Oust per acre I to 2 weeks following an initial spring mowing. Make only one application per year. 
8.9 Utility sites 
In utilities. this product is recommended for use along electrical power, pipeJine and telephone rights-of-way, 
and in other sites associated with these rights-of-way, such as substations. roadsides. railroads or similar rights­
of-way that Tun in conjunction with utilities. 
This product is also recommended for use in preparing or establishing wildlife openings within these sites, 
maintaining access roads and for side trimming along utility rights-of-way. 
Tank Mixtures 
Tank mixtures of this product may be used to increase the spectrum of control for herbaceous weeds, woody 
brush and trees. When tank mixing. read and carefully observe the label claims, cautionary statements and all 
information on the labels of all products used. Use according to the most restrictive precautionary statements 
for each product in the mixture. Any recommended rate of this product may be used in a tank mix. 
For control of herbaceous weeds. use the lower recommended tank mixture rates. For control of dense stands 
or tough-to-control woody brush and trees, use the higher recommended rates. 
NOTE: For side trimming treatments, it is recommended that this product be used alone or in tank mixture with 
Oarlon 4. 
PRODUCT BROADCAST RATE 
Arsenal 2WSL 6 to 32 fluid ounces per acre 
Master Label MON 78271 Page 104 of 118 
USE SITES 
Utility Sites 
Version: Apr-2002 
UNMARKED

III. MAIN LABEL FOR INDUSTRIAL. TURF, AND ORNAMENTAL USES 
Escort I to 2 ounces per acre Utility Sites 
Garlon 3A*, Garlon 4 I to 4 quarts per acre Utility Sites! 
Side Trimming 
Oust 1 to 4 ounces per acre Utility Sites 
PRODUCT SPRAY -TO-WET RATES USE SITES 
Arsenal 2WSL 1116 to 118 percent by volume Utility Sites 
Escort 1 to 2 ounces per aCre Utility Sites 
PRODUCT LOW VOLUME DIRECTED SPRAY RATES USE SITES 
Arsenal 2 W SL 118 to 112 percent by volume Utility Sites 
Escort 1 to 2 ounces per acre Utility Sites 
• Ensure that Garlon 3A is thoroughly mixed with water according to label directions before adding this 
product. Have spray mixture agitating at the time this product is added to avoid spray compatibility problems. 
Bare Ground and Trim-and-edge 
This product may be used in utility sites and substations for bare ground, trim-and-edge around objects, spot 
treatment of unwanted vegetation and to eliminate unwanted weeds growing in established shrub beds or 
ornamental plantings, This product may be used prior to planting a utility site to ornamentals, flowers, turfgrass 
(sod or seed), or beginning construction projects. 
Repeated applications of this product may be used, as weeds emerge, to maintain bare ground. 
This product may be tank mixed with the following products. Refer to these products' labels for approved 
noocrop sites and application rates. 
ARSENAL 
BANVEL 
BARRICADPM 65WG 
DIURON 
ENDURANCpM 
ESCORT 
GARLON3A 
9,0 WEEDS CONTROLLED 
PLATEAlJ'M 
PRINCEpTMDF 
PRINCEpTM LIQUID 
RONST ARTM 50WP 
SAHARATM 
SIMAZINE 
SURFLANTM 
Always use the higher rate of this product per acre within the recommended range when weed growth is heavy 
or dense or weeds aTe growing in an undisturbed (noncultivated) area. 
MaSler Label MON 78271 Page 105 of lIS Version: Apr-2002 
UNMARKED

--- ---- ........... --.. 
III. MAIN LABEL FOR INDUSTRIAL. TURF. AND ORNAMENTAL USES 
Reduced results may occur when treating weeds heavily covered with dust. For weeds that have been mowed. 
grazed or cut. allow regrowth to occur prior to treatment. 
Refer to the following label sections for recommended rates for the control of annual and perennial weeds and 
woody brush and trees. For difficult to control perennial weeds and woody brush and trees. where plants are 
growing under stressed conditions. or where infestations are dense. this product may be used at 4.5 to 8 quarts 
per acre for enhanced results. 
9.1 Annual Weeds 
Use 24 fluid ounces per acre if weeds are less than 6 inches in height or runner length and I to 4 quarts per acre 
if weeds 3re over 6 inches in height or Tunner length or when weeds are growing under stressed conditions. 
For spray-to-wet applications, apply a 0.5 percent solution of this product to weeds less than 6 inches in height 
or runner length. Apply prior to seed head formation in grass or bud formation in broad leaf weeds. For annual 
weeds over 6 inches tall, or for smaller weeds growing under stressed conditions, use a 0.8 to 1.7 percent 
solution. Use the higher rate for tough-to-control species or for weeds over 24 inches tall. 
WEED SPECIES 
Annoda, spurred 
Barley' 
Barnyardgrass' 
Bittercress* 
B lack nightshade" 
Bluegrass, annual' 
Bluegrass, bulbous" 
Bassia, five hook 
Brome, downy' 
Brame. Japanese'" 
Browntop panicum* 
Buttercup'" 
Carolina foxtail' 
Carolina geranium 
Castor bean 
Cheat grass' 
Cheeseweed (Malva parvifloral 
Chervil' 
Chickweed' 
Cocklebur' 
Copper leaf, hophornbeam 
Corn'" 
Corn speedwell' 
Crabgrass' 
Dwarfdandelion' 
Eastern mannagrass* 
EcJipta' 
Fall panicum' 
Falsedandelion' 
Falseflax, small seed' 
Fiddleneck 
Field pennycress' 
Filaree 
Fleabane, 
annual> 
Fleabane, hairy (Conyza bonariensis)' 
Master Label MON 78271 Page 106 of 118 Version: Apr-2002 
UNMARKED

III. MAIN LABEL FOR INDUSTRIAL, TIlRF, AND ORNAMENTAL USES 
Fleabane, rough· 
Florida pusley 
Foxtail" 
Goatgrass, jointed· 
Goosegrass 
Grain sorghum (milo)· 
Groundsel, common" 
Hemp sesbania 
Henbit 
HorseweedlMarestaii (CoIIYza calladellsis) 
Itchgrass· 
Johnsongrass, seedling 
Junglerice 
Knotweed 
Kochia 
Lamb's-quarters· 
Little barley· 
London rocket· 
Mayweed 
Medusahead· 
Morningglory (Ipomoea spp) 
Mustard, blue· 
Mustard. tansy'" 
Mustard, tumble· 
Mustard, wild· 
Oats 
Pigweed· 
Plainsrrickseed coreopsis· 
Prickly lettuce· 
Puncturevine 
Purslane. common 
Ragweed. common'" 
Ragweed, giant 
Red rice 
Russian thistle 
Rye· 
Ryegrass· 
Sandbur, field* 
Shattercane* 
Shepherd's-purse· 
Sicklepod 
Signalgrass, broadleaf* 
Smartweed, ladysthumb* 
Smartweed, Pennsylvania. 
Sowthistle, annual 
Spanishneedles 
Speedwell, purslane· 
Sprangletop· 
Spurge, annual 
Spurge, prostrate· 
Spurge, spotted· 
Spurry, umbrella· 
Starthistle, yellow 
Stinkgrass· 
Sunflower'" 
Master Label MON 78271 Page 107 of 118 Version: Apr·2002 
UNMARKED

III. MAIN LABEL FOR INDUSTRIAL. TURF. AND ORNAMENTAL USES 
Teaweed! Prickly sida 
Texas panicum* 
Velvetleaf 
Virginia copperleaf 
Virginia pepperweed* 
Wheat* 
Wild oats' 
Witchgrass' 
Woolly cupgrass' 
Yellow rocket 
'When using field broadcast equipment (aerial applications or boom sprayers using flat-fan nozzles) these 
species will be controlled or partially controlled using 12 fluid ounces of this product per acre. Applications 
must be made using 3 to 10 gallons of carrier volume per acre. Use nozzles that ensure thorough coverage of 
foliage and treat when weeds are in an early growth stage. 
9.2 Perennial Weeds 
Best results are obtained when perennial weeds are treated after they reach the reproductive stage of growth 
(seedhead initiation in grasses and bud formation in broadleaves). For non-flowering plants. best results are 
obtained when the plants reach a mature stage of growth. In many situations. treatments are required prior to 
these growth stages. Under these conditions. use the higher application rate within the recommended range. 
Ensure thorough coverage when using spray-to-wet treatments using hand-held equipment. When using hand­
held equipment for low volume directed spot treatments. apply a 5 to 8 percent solution of this product. 
Allow 7 or more days after application before tillage. 
Weed Species Rate 
(QT/A) 
Alfalfa' 0.7 
Alligatorweed* 2.8 
Anise (fennel) 1.7 - 2.8 
Bahiagrass 2.3 - 4 
Beachgrass. European (Ammophila arena ria) 
Bentgrass'" I 
Bermudagrass 4 
Bermudagrass. water (knotgrass) 
Bindweed. field 2.8 - 4 
Bluegrass. Kentucky 1.7 
Blueweed. Texas 2.8 - 4 
Brackenfern 2.3 - 2.8 
Bromegrass. smooth 1.7 
Sursage. woolly-leaf 
Canary grass. reed 1.7 - 2.3 
Cattail 2.3 - 4 
Clover; red. white 2.3 - 4 
Cogongrass 2.3 - 4 
Dallisgrass 2.3 - 4 
Dandelion 2.3 - 4 
Dock. curly 2.3 - 4 
Dogbane. hemp 2.8 
Master Label MON 7827 J Page 108 of 118 
Hand-Held 
% Solution 
1.7 
I 
I - 1.7 
1.7 
3.5 
1.7 
1.7 
1.7 
1.7 
1.7 
1.7 
I 
1.7 
1.7 
1.7 
1.7 
1.7 
1.7 
1.7 
1.7 
1.7 
1.7 
Version: Apr-2002 
UNMARKED

",' 
JJI. MAIN LABEL FOR INDUSTRIAL. TURF. AND ORNAMENTAL USES 
Fescue (except tall) 2.3 - 4 1.7 
Fescue. tall 1.2 - 2.3 1.7 
German ivy 1.7 -2.8 I - 1.7 
Guineagrass 2.3 I 
Horsenettle 2.3 - 4 1.7 
Horseradish 2.8 1.7 
leeplant 1.7 1.7 - 2.3 
Jerusalem artichoke 2.3 - 4 1.7 
Johnsongrass 1.7 - 2.3 I 
Kikuyugrass 1.7 - 2.3 1.7 
Knapweed 2.8 1.7 
Lantana 
Lespedeza 2.3 - 4 1.7 
Milkweed. common 2.3 1.7 
Muhly. wirestem 1.7 1.7 
Mullein. common 2.3 - 4 1.7 
Napiergrass 2.3 - 4 1.7 
Nightshade. silverleaf 1.7 1.7 
Nutsedge; purple. yellow 2.3 I - 1.7 
Orchard grass 1.7 1.7 
Pampasgrass 2.3 - 4 I - 1.7 
Paragrass 2.3 - 4 1.7 
Pepperweed. perennial 2.8 1.7 
Phragmites" 2.3 - 4 I - 1.7 
Poison hemlock 1.7 - 2.8 I - 1.7 
Quackgrass 1.7 - 2.3 1.7 
Redvine* 1.7 1.7 
Reed. giant 2.8 - 4 1.7 
Ryegrass. perennial 1.7 - 2.3 I 
Smartweed. swamp 2.3 - 4 1.7 
Spurge. leafy" 1.7 
Sweet potato. wild" 1.7 
Thistle. artichoke 1.7 - 2.3 I - 1.7 
Thistle. Canada 1.7 - 2.3 1.7 
Timothy 1.7 - 2.3 1.7 
Torpedograss' 2.8 - 4 1.7 
T Tumpetcreeper* 1.7 - 2.3 1.7 
Vaseygrass 2.3 - 4 1.7 
Vel vetgrass 2.3 - 4 1.7 
Wheatgrass. western 1.7 - 2.3 1.7 
'Partial control 
9.3 Woody Brush and Trees 
Apply this product after full leaf expansion. unless otherwise directed. Use the higher rate for larger plants 
andlor dense areas of growth. On vines. use the higher rate for plants that have reached the woody stage of 
growth. Best results are obtained when application is made in late summer or fall after fruit formation. 
In arid areas. best results are obtained when applications are made in the spring to early summer when brush 
species are at high moisture content and are flowering. 
Ensure thorough coverage when using spray-to-wet treatments using hand-held equipment. When using hand­
held equipment for low volume directed-spray spot treatments. apply a 5 to 8 percent solution of this product. 
MaSler Label MON 78271 Page 109 of 118 Version: Apr·2002 
UNMARKED 
IID/llf

..... • oi:';;'_ •• 
III. MAIN LABEL FOR INDUSTRIAL. TURF. AND ORNAMENTAL USES 
Symploms may nol appear prior to frost or senescence with fall treatments. 
Allow 7 or more days afler applicalion before lillage. mowing or removal. Repeallrealments may be necessary 
10 conlrol planls regenerating from underground pans or seed. Some aulumn colors on undesirable deciduous 
species are acceplable provided no major leaf drop has occurred. Reduced performance may result if fall 
Irealments are made following a frost. 
Broadcast Hand-Held 
Weed Species Rate Spray-Io-Wet 
(QT/A) % Solulion 
Alder 2.3 • 2.8 1 
Ash' 1.7·4 1 . 1.7 
Aspen. quaking 1.7 - 2.3 1 
Bearelover (Bearmat)' 1.7-4 1 . 1.7 
Beech' 1.7·4 1 • 1.7 
Birch 1.7 1 
Blackberry 2.3·2.8 1 
Blackgum 1.7·4 I • 1.7 
Bracken 1.7 ·4 1 . 1.7 
Broom; French. Scotch 1.7·4 1 . 1.7 
Buckwheat. California' 1.7 . 2.8 1· L7 
Cascara'" 1.7·4 I . 1.7 
Catsclaw* 
Ceanolhus' 1.7·4 1 . 1.7 
Chamise' 1.7 . 4 
Cherry; biner. black. pin 1.7 - 2.3 I 
Coyole brush 2.3 . 2.8 1 • 1.7 
Deerweed 1.7 ·4 1 
Dogwood' 1.7·4 1· L7 
Elderberry 1.7 
Elm" 1.7·4 I . 1.7 
Eucalyplus 1.7 
Gorse'" 1.7 ·4 1 . 1.7 
Hasardia* 1.7 ·2.8 I . 1.7 
Hawthorn 1.7 - 2.3 
Hazel 1.7 I 
Hickory' 1.7 . 4 1 . 1.7 
Honeysuckle 2.3 . 2.8 1 
Hornbeam. American'" 1.7·4 1 . 1.7 
Kudzu 2.8 1.7 
Locusl. black' 1.7 . 2.8 1 . 1.7 
Madrone resprouts* 1.7 
Manzanita* 1.7 ·4 I . 1.7 
Maple. red 1.7 - 2.8 
Maple. sugar 
Monkey flower' 1.7·2.8 I . 1.7 
Oak; black. while' 1.7 . 2.8 I - 1.7 
Oak. POSI 2.3 - 2.8 I 
Oak; norlhern. pin 1.7 ·2.8 I 
Oak. Scrub' 1.7 . 2.8 I 
Oak; soulhern red 1.7 - 2.3 I 
Pepperlree. Brazilian (Florida holly)' 1.7·4 I . 1.7 
Master Label MON 78271 Page 110 of 118 Version: Apr-2002 
UNMARKED

,'\~. 
111. MAIN LABEL FOR INDUSTRIAL. TURF. AND ORNAMENTAL USES 
Persimmon* 1.7 - 4 1-1.7 
Pine 1.7 - 4 I - 1.7 
Poison ivy 2.8 - 4 1.7 
Poison oak 2.8 - 4 1.7 
Poplar. yellow· 1.7-4 I - 1.7 
Redbud. eastern 1.7 - 4 I - 1.7 
Rose. multiflora 1.7 I 
Russian olive'" 1.7 - 4 I - 1.7 
Sage. black 1.7 - 2.8 I 
Sage. white· 1.7 - 2.8 I - 1.7 
Sage brush. California 1.7 - 2.8 I 
Salmonberry 1.7 I 
Saltcedar· 1.7 - 4 I - 1.7 
Sassafras· 1.7 - 4 I - 1.7 
Sourwood'" 1.7 - 4 I - 1.7 
Sumac; laurel. poison. smooth. sugarbush. winged' 1.7 - 2.8 I - 1.7 
Sweetgum 1.7 - 2.3 I 
Swordfern' 1.7 - 4 I - 1.7 
Tallowtree. Chinese 
Tan oak resprouts '" 1.7 
Thimbleberry 1.7 I 
Tobacco. tree'" 1.7 - 2.8 I - 1.7 
Toyon' 1.7 
T rumpetcreeper 1.7 - 2.3 I 
Vine maple' 1.7 - 4 I - 1.7 
Virginia creeper 1.7-4 I - 1.7 
Wax myrtle. southern" 1.7 - 4 I - 1.7 
Willow 2.3 I 
Y erbasenta '" 1.7 
"'Partial control 
10.0 LIMIT OF WARRANTY AND LIABILITY 
Monsanto Company warrants that this product conforms to the chemical description on the label and is 
reasonably fit for the purposes set forth in the Complete Directions for Use label booklet ("Directions") when 
used in accordance with those Directions under the conditions described therein. NO OTHER EXPRESS 
WARRANTY OR IMPLIED WARRANTY OF FITNESS FOR PARTICULAR PURPOSE OR 
MERCHANT ABILITY IS MADE. This warranty is also subject to the conditions and limitations stated herein. 
Buyer and all users shall promptly notify this Company of any claims whether based in contract. negligence. 
strict liability. other tort or otherwise. 
Buyer and all users are responsible for all loss or damage from use or handling which results from conditions 
beyond the control of this Company. including. but not limited to. incompatibility with products other than 
those set forth in the Directions. application to or contact with desirable vegetation. unusual weather. weather 
conditions which are outside tlie range considered normal at the application site and for the time period when 
the product is applied. as well as weather conditions which are outside the application ranges set forth in the 
Directions, application in any manner not expJicitly set forth in the Directions, moisture conditions outside the 
moisture range specified in the Directions. or the presence of products other than those set forth in the 
Directions in or on the soil. crop or treated vegetation. 
MaSler Label MON 7827] Page 111 of 118 Version: Apr-2002 
UNMARKED

111. MAIN LABEL FOR INDUSTRIAL, TURF, AND ORNAMENTAL USES 
This Company does not warrant any product reformulated or repackaged from this product except in 
accordance with this Company's stewardship requirements and with express written permission from this 
Company. 
THE EXCLUSIVE REMEDY OF THE USER OR BUYER, AND THE LIMIT OF THE LIABll.ITY OF 
THIS COMPANY OR ANY OTHER SELLER FOR ANY AND ALL LOSSES, INJURIES OR DAMAGES 
RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT (INCLUDING CLAIMS BASED IN 
CONTRACT, NEGLIGENCE, STRICT LIABll.ITY, OTHER TORT OR OTHERWISE) SHALL BE THE 
PURCHASE PRICE PAID BY THE USER OR BUYER FOR THE QUANTITY OF THIS PRODUCT 
INVOLVED, OR, AT THE ELECTION OF THIS COMPANY OR ANY OTHER SELLER, THE 
REPLACEMENT OF SUCH QUANTITY, OR, IF NOT ACQUIRED BY PURCHASE, REPLACEMENT OF 
SUCH QUANTITY. IN NO EVENT SHALL THIS COMPANY OR ANY OTHER SELLER BE LIABLE 
FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES. 
Upon opening and using this product, buyer and all users are deemed to have accepted the terms of this LIMIT 
OF WARRANTY AND LIABILITY which may not be varied by any verbal or written agreement. If terms are 
not acceptable, return at once unopened. 
[INSERT BRAND NAME], Manage, Monsanto and Vine symbol are trademarks of Monsanto Technology 
LLC. 
Escort, Hyvar, Karmex, Krovar, Oust, and Telar are trademarks ofE.1. duPont de Nemours & Co. Inc. 
Garlon, Spike, Surflan and Tordon are trademarks of Dow AgroSciences 
Barricade, Endurance, Princep and Vanquish are trademarks of Sygenta Group 
Ronstar is a trademark of Aventis Group. 
Arsenal, Pendulum, Plateau, and Sahara are trademarks of BASF Corporation 
This product is protected by U.S. Patent Nos. 5,688,085; 6,365,551 ; 5,683,958; 5,703,015; 6,063,733; 
6,121,199; and 6,121,200. No license granted under any non-U.S. patent(s). 
EPA Reg. No. 524-LGI 
In case of an emergency involving this product, 
or for medical assistance. 
Call Collect, day or night, (314) 694-4000. 
©[DATE] MONSANTO COMPANY 
ST. LOUIS, MISSOURI, 63167 U.S.A. 
Master Label MON 78271 Page 112 of 118 Version: Apr·2002 
UNMARKED

IV. SUPPLEMENTAL LABELING FOR INDUSTRIAL. TURF. & 
ORNAMENTAL USES 
T bl fC a eo ontents: Id 'ITrf dO n ustna, u . an mamenta I S I upplementa II b r a e mg 
Name 
A FOR USE FOR SELECTIVE WEED CONTROL ON [INSERT 
BRAND NAME] TOLERANT PURE GOLD® TALL FESCUE 
AND AURORA GOLD® FINE FESCUE SELECTIONS. 
B [INSERT BRAND NAME] HERBICIDE AND TANK 
MIXTURES FOR NON-CROP AREAS, INCLUDING RAll..ROAD 
RIGHTS-OF-WAY, SUBSTATIONS, AIRPORTS, INDUSTRIAL 
PLANTS, ROADSIDES, STORAGE AREAS AND SIMll..AR 
SITES 
C AERIAL APPUCATIONS IN CALIFORNIA 
** Approval Dates for Roundup Pro 
Master Label MON 78271 Page 113 of 118 
Approval 
Date** 
29-Sep-1999 
l-Apr-1996 
l-Apr-1996 
Version: Apr·2002 
UNMARKED

IV. SUPPLEMENTAL LABELING FOR INDUSTRIAL. TURF. AND ORNAMENTAL USES 
SUPPLEMENTAL LABELING 
READ THE ENTIRE LABEL FOR [INSERT BRAND NAME) BEFORE PROCEEDING WITH THE USE 
DIRECTIONS CONTAINED IN THIS SUPPLEMENTAL LABELING. 
[ ) 
When using [INSERT BRAND NAME) as permitted according to this supplemental labeling. read and follow 
all applicable directions. restrictions. and precautions on the label booklet provided with the pesticide container 
and on this supplemental labeling. This supplemental labeling must be in the possession of the user at the time 
of pesticide application. 
[INSERT BRAND NAME HERE] 
Herbicide 
EPA Reg. No. 524-LGI 
Keep out of reach of children. 
WARNING! AVISO! 
In case of an emergency involving this product, Call Collect, day or night, 314-694-4000. 
[INSERT BRAND NAME) is a trademark of Monsanto Technology LLC. 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in any manner inconsistent with its labeling. 
This labeling must be in the possession of the user at the time of herbicide application. 
A VOID CONTACT OF HERBICIDE WITH FOLIAGE, GREEN STEMS, EXPOSED NON-WOODY 
ROOTS OR FRUIT OF CROPS, DESIRABLE PLANTS AND TREES, BECAUSE SEVERE INJURY OR 
DESTRUCTION MAY RESULT. 
See "GENERAL INFORMATION" and "MIXING" sections of the label booklet for [INSERT BRAND 
NAME) for essential product performance information. 
Read the "Limit of Warranty and Liability" in the label booklet for [INSERT BRAND NAME) before 
using. These terms apply to Ihis supplemental labeling and if these terms are not acceptable, return the 
product unopened at once. 
© [DATE) MONSANTO COMPANY 
ST. LOUIS, MISSOURI 63167 
Master Label MON 78271 Page 114 of 118 Version: Apr-2002 
UNMARKED

IV. SUPPLEMENTAL LABELING FOR INDUSTRIAL. TURF. AND ORNAMENTAL USES 
A. FOR USE FOR SELECTIVE WEED CONTROL ON [INSERT BRAND NAME] 
TOLERANT PURE GOLD® TALL FESCUE AND AURORA GOLD® FINE FESCUE 
SELECTIONS. 
[INSERT BRAND NAME) Tolerant Tall Fescue Selections For Seed Production 
Use this product on [INSERT BRAND NAME) tolerant tall and fine fescue grown for seed production only. 
This product may be applied at rates of 3 to 12 fluid ounces per acre as a postemergence spray on [INSERT 
BRAND NAME) tolerant tall fescue selections. See the label booklet for application instructions. rate 
recommendations. weeds controlled and proper growth stage of weeds. 
When applied postemergence. this product will control or suppress the following weeds: annual bluegrass 
mustards, downy brome, cheatgrass, chickweed, pennyeress, fleabane, shepherd's-purse, sowthistle, wild oat, 
dandelion, quackgrass. and Canada thistle. See the [INSERT BRAND NAME) label booklet for a complete 
list of weeds controlled or suppressed. 
NOTE: The recommended rate for this use will limit the level of control of certain species of weeds. 
NOTE: Some crop discoloration and yellowing may occur at higher rates of application with INSERT 
BRAND NAME) tolerant tall and fine fescue selections. Reduction in stand of these selections may occur 
under stress conditions. 
Timing Of Applications 
Applications can be made 6 weeks after germination and to established crops after growth resumes in the Fall 
until onset of dormancy and in the Spring after dormancy break until 60 days prior to harvest. 
Avoid spraying during or within two weeks after periods when air temperatures fall below 25°F. 
Remove domestic livestock from the seed production field prior to application. Wait 60 days after making this 
application before grazing or harvesting the treated area. 
NOTE: Only two applications per crop growth cycle may be made to anyone site. If two applications are 
required, only one Fall and one Spring application may be made during one 12 month cycle. 
B. [INSERT BRAND NAME] HERBICIDE AND TANK MIXTURES FOR NON-CROP 
AREAS, INCLUDING RAILROAD RIGHTS-OF-WAY, SUBSTATIONS, AIRPORTS, 
INDUSTRIAL PLANTS, ROADSIDES, STORAGE AREAS AND SIMILAR SITES 
Do not allow spray mixtures of this herbicide to mist, drip. drift or splash onto desirable vegetation since injury 
or destruction may occur. Do not apply when wind or other conditions favor drift. 
See the "WEEDS CONTROLLED" section of the [INSERT BRAND NAME) label booRlet for rate 
recommendations. For difficult to control species, where dense stands occur, or where conditions for control 
are not ideal, 4.5 to 8 quarts per acre of this product may be used for improved results. 
MaSler l...;:tbel MON 78271 Page 115 of 118 Version: Apr·2002 
UNMARKED 
)I" /111

- -~, 
--------,-_ .. --
IV, SUPPLEMENTAL LABELING FOR INDUSTRIAL. TURF. AND ORNAMENTAL USES 
TANK MIXTURES 
This product provides control of the emerged weeds listed in the label booklet When applied as a tank 
mixture. the following herbicides will provide preemergence andlor postemergence control of the weeds listed 
in the individual product labels. 
The following list of products may be tank mixed with this product Any recommended rate of this product 
may be used in a tank mixture with these products, 
Tank-mix Product 
Arsenal™ • 
Banvel 
2,4-D 
Oarlon™ 3A 
Oarlon 4 
Diuron 
Diuron + 2,4-D 
Diuron + Oarlon 3A 
Diuron + Oarlon 4 
HyvarTM X 
Hyvar X + 2,4-D 
Hyvar X + Oarlon 3A 
Hyvar X + Oarlon 4 
Krovar™ I DF 
Krovar I DF + 2,4-D 
Krovar I DF + Oarlon 3A 
Krovar I DF + Oarlon 4 
Oust™ 
Oust + 2,4-D 
Oust + Oarlon 3A 
Oust + Oarlon 4 
Spike™ 80W 
Spike 80W + 2,4-D 
Spike 80W + Oarlon 3A 
Spike 80W + Oarlon 4 
• Arsenal is not approved for use in the state of California, 
Rate per Acre 
0.5 to 4 pints 
I to 4 pints 
0.5 to I pound 
I to 6 pints 
I to 6 pints 
4 to 8 pounds 
4 to 8 pounds + 0.5 to I pound 
4 to 10 pounds + I to 2 pints 
4 to 10 pounds + I to 2 pints 
4 to 8 pounds 
4 to 8 pounds + 0.5 to I pound 
4 to 8 pounds + I to 2 pints 
4 to 8 pounds + I to 2 pints 
4 to 6 pounds 
4 to 6 pounds + 0.5 to I pound 
4 to 6 pounds + I to 2 pints 
4 to 6 pounds + I to 2 pints 
2 to 6 ounces 
2 to 6 ounces + 0,5 to I pound 
2 to 6 ounces + I to 2 pints 
2 to 6 ounces + I to 2 pints 
2 to 5 pounds 
2 to 5 pounds + 0,5 to I pound 
2 to 5 pounds + I to 2 pints 
2 to 5 pounds + I to 2 pints 
Refer to the individual product labels for specific non·crop sites, rates, carrier volumes and precautionary 
statements. 
Read and carefully observe the label claims. cautionary statements, recommended use rates and all other 
information on the labels of all products used in these tank mixtures, Use according to the most restrictive label 
directions for each product in the mixture. 
Maintain good agitation at all times during the mixing process. Ensure that the tank-mix products are well 
mixed with the spray solution before adding this product 
Mix only the quantity of spray solution that can be used during the same day, Tank mixtures allowed to stand 
overnight may result in reduced weed control. 
Masler Label MON 78271 Page 116 of 118 Version: Apr-2002 
UNMARKED

~.'" 
IV. SUPPLEMENTAL LABELING FOR INDUSTRIAL, TURF, AND ORNAMENTAL USES 
Maintain good agitation at all times until the conlents of the tank are sprayed. If the spray mixture is allowed to 
settle, thorough agitation is required to resuspend the mixture before spraying is resumed. 
When used in combination as recommended by Monsanto Company, the liability of Monsanto shall in no 
manner extend to any damage. loss or injury not solely and directly caused by the inclusion of the Monsanto 
product in such combination use. 
Read "LIMIT OF WARRANTY AND LIABILITY" in the label booklet for [INSERT BRAND NAME) 
before using this product. Those terms apply to this supplemenlallabeling and, if those terms are not 
acceptable, return the product unopened at once. 
TM Arsenal is a trademark of American Cyanamid Company. 
™Banvel is a trademark of Sandoz Crop Protection Corporation. 
™Garlon and Spike are trademarks of Dow AgroSciences LLC 
ThlHyvar, Krovar and Oust are trademarks ofE. I duPont de Nemours and Company. 
AERIAL APPLICA T)ONS IN CALIFORNIA 
Aerial applications of this product are allowed in the following situations: 
I. Prior to the emergence or transplanting of labeled crops 
2. Aid to burning for establishment and maintenance of fuel breaks 
3. Establishing fire perimeters and black lines 
4. Aid to prescribed burning 
5. Along fire roads 
6. Range conversion 
7. Habitat restoration and management 
8. Wildlife food plots 
Apply 24 fluid ounces to 4 quarts of this product in S to IS gallons of water per acre using aerial (helicopter 
only) applications. 
To broaden the spectrum of control, Garlon™ 4 may be tank mixed with this product at the rate of 0.5 to 2 
quarts per acre. The rate of Garlon should not exceed 1/2 the rate of this product (e.g. I quart of Garlon to 2 
quarts of this product) for best results. 
Do not apply directly to water;to areas where surface water is present or to intertidal areas below the mean 
high water mark. Do not contaminate water when disposing of equipment washwaters. 
A VOID DRIFT - DO NOT APPLY WHEN WINDS ARE GUSTY OR UNDER ANY OTHER CONDITION 
WHICH WILL ALLOW DRIFT. DRIFT MAY CAUSE DAMAGE TO ANY VEGETATION CONTACTED 
TO WHICH TREATMENT IS NOT INTENDED. TO PREVENT INJURY TO ADJACENT DESIRABLE 
VEGETATION, APPROPRIATE BUFFER ZONES MUST BE MAINTAINED. 
Masler Label MON 7827 J Page 117 of 118 Version: Apr·2002 
UNMARKED

IV. SUPPLEMENTAL LABELING FOR INDUSTRIAL. TURF, AND ORNAMENTAL USES 
Use the following guidelines when aerial applications are made near crops or desirable perennial vegetation 
after bud break and before total leaf drop, andlor near other desirable vegetation or annual crops. 
I. Do not apply within 100 feet of any desirable vegetation or crop(s). 
2. If wind up to 5 miles per hour is blowing toward desirable vegetation or crop(s), do not apply 
within a minimum of 500 feet of the desirable vegetation or crop(s). 
3. Winds blowing from 5 to IO miles per hour toward desirable vegetation or crop(s) may require 
buffer zones in excess of 500 feet. 
4. Do not apply when winds are in excess of 10 miles per hour or when inversion conditions exist. 
5. APPLY BY AIR ONLY TO NONRESIDENTIAL AREAS. 
Coarse sprays are less likely to drift; therefore, do not use nozzles or nozzle configurations which dispense 
spray as fine spray droplets. Do not angle nozzles forward into the airstream and do not increase spray volume 
by increasing nozzle pressure. Drift control additives may be used. When a drift control additive is used, read 
and carefully observe the cautionary statements and all other information appearing on the additive label. 
Ensure uniform application - To avoid streaking, uneven, or overlapped application, use appropriate marking 
devices. 
PROLONGED EXPOSURE OF THIS PRODUCT TO UNCOATED STEEL SURFACES MA Y RESULT IN 
CORROSION AND POSSIBLE FAILURE OF THE PART. The maintenance of an organic coating (paint) 
which meets aerospace specification MIL-C-38413 may prevent corrosion. To prevent corrosion of exposed 
parts, thoroughly wash aircraft after each day of spraying to remove residues of this product accumulated 
during spraying or from spills. Landing gear are most susceptible. 
Read the "LIMIT OF WARRANTY AND LIABILITY" in the I.bel booklet for [INSERT BRAND NAME] 
before using this product. Those terms apply to this supplementall.beling and if those terms are not 
accept.ble, return the product unopened at once. 
GarlonT• is a trademark of Dow AgroSciences LLC 
Masler Label MON 78271 Page 118 of 118 Version: Apr-2002 
UNMARKED