crop-chem-docs/corpus/epa_ppls/5905-625.md

HM-1603 Herbicide

• EPA Reg No: 5905-625
• Registrant: HELENA AGRI-ENTERPRISES, LLC, D/B/A HELENA CHEMICAL COMP
• Signal word: Danger
• Active ingredients: Dicamba (18.28%); 2,4-D (24.62%)
• Label accepted: 2020-10-20
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/005905-00625-20201020.pdf

---

Date of Issuance;EPA Reg. Number: 10/20/205905-625 Term of Issuance: Conditional Name of Pesticide Product: HM-1603 Herbicide Continued on pa^e 2 Signature of Approving Official: Date: 10/20/20 On the basis of information furnished by the registrant, the above named pesticide is hereby registered under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA). Registration is in no way to be construed as an endorsement or recommendation of this product by the Agency. In order to protect health and the environment, the Administrator, on his motion, may at any time suspend or cancel the registration of a pesticide in accordance with the Act. The acceptance of any name in connection with the registration of a product under this Act is not to be construed as giving the registrant a right to exclusive use of the name or to its use if it has been covered by others. This product is conditionally registered in accordance with FIFRA section 3(c)(7)(A). You must comply with the following conditions; Note: Changes in labeling differing in substance from that accepted in connection with this registration must be submitted to and accepted by the Registration Division prior to use of the label in commerce. In any correspondence on this product always refer to the above EPA registration number. NOTICE OF PESTICIDE: X Registration __ Reregistration (under FIFRA, as amended) U.S. ENVIRONMENTAL PROTECTION AGENCY Office of Pesticide Programs Registration Division (7505P) 1200 Pennsylvania Ave., N.W. Washington, D.C. 20460 Name and Address of Registrant (include ZIP Code): Bill Washbum Registration Manager Helena Agri-Enterprises, LLC D/B/A Helena Chemical Corp 225 Schilling Blvd., Suite 300 Collierville, TN 38017 Mindy Ondish, Product Manager 23 Herbicide Branch, Registration Division (7505P) EPA Form 8570-6 Registration Notice Conditional v.20150320

1. Submit and/or cite all data required for registration/reregistration/registration review of your product under FIFRA when the Agency requires all registrants of similar products to submit such data.

a. Dicamba GDCI-029801-1659 The alternate brand name, “LATIGO BOLD ” has been added to the product record. Please also note that the record for this product currently contains the following CSFs: Enclosure If you have any questions, you may contact Julia Kerr at 703-347-0386 or via email at kerr.julia@epa.gov. You must comply with all of the data requirements within the established deadlines. If you have questions about the GDCI listed above, you may contact the Chemical Review Manager in the Pesticide Reevaluation Division: http://iaspub.epa.gov/apex/pesticides/f?p=chemicalsearch:l 2. You are required to comply with the data requirements described in the Generic Data Call-In (GDCI) identified below: If you fail to satisfy these data requirements, EPA will consider appropriate regulatory action including, among other things, cancellation under FIFRA section 6(e). Your release for shipment of the product constitutes acceptance of these conditions. A stamped copy of the label is enclosed for your records. 3. Submit one copy of the final printed label for the record before you release the product for shipment. Should you wish to add/retain a reference to the company ’s website on your label, then please be aware that the website becomes labeling under FIFRA and is subject to review by the Agency. If the website is false or misleading, the product would be misbranded and imlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims made on the website may not substantially differ from those claims approved through the registration process. Therefore, should the Agency find or if it is brought to our attention that a website contains false or misleading statements or claims substantially differing from the EPA approved registration, the website will be referred to the EPA ’s Office of Enforcement and Compliance. • Basic CSF dated 5/22/2019 • Alternate CSF 1 dated 5/22/2019 Page 2 of 2 EPA Reg. No. 5905-625 Decision No. 551335

GROUP HERBICIDE KEEP OUT OF REACH OF CHILDREN DANGER/PELIGRO IF IN EYES: ACCEPTED ^Herbicide 5905-625 Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 1 4 IF SWALLOWED: Equivalent to: Dicamba acid equivalent 18.28%, 1.8 Ibs/gal. 2,4-D acid equivalent 24.62%, 2.4 Ibs/gal. Isomer specific by AOAC Method 6.D01-5 (12th Ed.) Patent No. 5,877,112, other patents pending. NET CONTENTS: AD XXXXXX Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand the label, find someone to explain it you in detail.). Manufactured For: Helena Agri-Enterprises, LLC 225 Schilling Boulevard, Suite 300 Collierville, TN 38017 ACTIVE INGREDIENT(S): Dicamba acid: 3,6-dichloromethoxybenzoic acid 2,4-D Acid: 2,4-Dichlorophenoxyacetic acid OTHER INGREDIENTS: TOTAL 18.28% 24.62% 57.10% 100.00% Dicamba Acid 2,4-D Acid EPA REG. NO. 5905-625 EPA EST. NO. FIRST AID _____________________________________ Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice Call a poison control center or doctor immediately for treatment advice. Have a person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison control center or doctor. Do not give anything by mouth to an unconscious or convulsing person.________ NOTE TO PHYSICIAN: Probable mucosal damage may contraindicate the use of gastric lavage._______ HOT LINE NUMBER - Have the product container or label with you when calling a poison control center or doctor or going for treatment. You may also contact 1-800-424-9300 for emergency medical treatment information.__________________________________________________________________________ SEE INSIDE PANEL FOR ADDITIONAL PRECAUTIONS AND DIRECTIONS FOR USE HM-1603 HERBICIDE (Alternate Brand Name: LATIGO BOLD) For control of a wide-spectrum of annual, biennial, and perennial broadleaf weeds and brush in Pastures, Rangeland, and Grass (Hay, Silage); Grass Grown for Seed; Wheat; Sugarcane, Teff, Conservation Reserve Program land; Certain Non-Crop Areas; General Farmstead Areas; Forest Management; Post­ Harvest, Fallow, Crop Stubble and Set Aside Acres 10/20/2020 UrtderlM Federal 1ti8«tic*da. Fungicide and R%idenlklci« Aei as for Qia pesticide registered under EPA Reg. No.

PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS AND DOMESTIC ANIMALS DANGER PERSONAL PROTECTIVE EQUIPMENT (PPE) 4. 5. See engineering controls for additional requirements. ENGINEERING CONTROL STATEMENTS USER SAFETY RECOMMENDATIONS ENVIRONMENTAL HAZARDS Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 2 1. 2. 3. Pilots must use an enclosed cockpit that meets the requirements listed in the WPS for agricultural pesticides [40 CFR 170.607(e)]. If this container contains over 1 gallon and less than 5 gallons, mixers and loaders who do not use a mechanical system (probe and pump) to transfer the contents of this container must wear coveralls or a chemical-resistant apron in addition to the other required PPE. Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry. After each day of use, clothing or PPE must not be re-used until it has been cleaned. Corrosive. Causes irreversible eye damage. Harmful if swallowed. Do not get in eyes or on clothing. Wash thoroughly with soap and water after handing and before eating, drinking, chewing gum, using tobacco, or using the toilet. Prolonged or frequently repeated skin contact may cause allergic reactions in some individuals. This pesticide is toxic to fish and aquatic invertebrates. Do not apply directly to water, or to areas where surface water is present, or to intertidal areas below the mean high water mark. Drift and runoff may be hazardous to aquatic organisms in water adjacent to treated areas. Do not contaminate water when disposing of equipment washwaters or rinsate. Apply this product only as directed on label. Users should: • Wash hands thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet. • Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and change into clean clothing. • Users should remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing. • Have the product container or label with you when calling a poison control center or going for treatment. You may also contact 1-800-424-9300 for emergency medical treatment. When handlers use enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.607(d-e)]., the handler PPE requirements may be reduced or modified as specified in the WPS. All mixers, loaders, applicators, flaggers, and other handlers must wear: Long-sleeved shirt and long pants. Shoes and socks. Chemical resistant gloves (made of Barrier laminate, butyl rubber > 14 mils, neoprene rubber > 14 mils, polyethylene, polyvinyl chloride (PVC) S: 14 mils, or viton > 14 mils Chemical resistant apron when applying with any handheld nozzle or equipment, mixing or loading, cleaning up spills or equipment, or otherwise exposed to the concentrate. Protective eyewear (goggles or face shield)

DIRECTIONS FOR USE It is a violation of Federal law to use this product in a manner inconsistent with its labeling. AGRICULTURAL USE REQUIREMENTS Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 48 hours. NON-AGRICULTURAL USE REQUIREMENTS 3 All applicable directions, restrictions, precautions and Conditions of Sale and Warranty are to be followed. This labeling must be in the user’s possession during application. Endangered Species Concerns: The use of any pesticide in a manner that may kill or otherwise harm an endangered species or adversely modify their habitat is a violation of federal law. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation. The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce agricultural plants on farms, forests, nurseries, or greenhouses. Do not enter or allow people (or pets) to enter the treated area until sprays have dried. Groundwater Contamination; Most cases of groundwater contamination involving phenoxy herbicides such as 2,4-D have been associated with mixing/loading and disposal sites. Caution should be exercised when handling 2,4-D pesticides at such sites to prevent contamination of groundwater supplies. Use of closed systems for mixing or transferring this pesticide will reduce the probability of spills. Placement of the mixing/loading equipment on an impervious pad to contain spills will help prevent groundwater contamination. Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE), and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is;

1. Coveralls worn over short-sleeved shirt and short pants.
2. Chemical resistant footwear plus socks
3. Chemical resistant gloves made of Barrier laminate, butyl rubber > 14 mils, neoprene rubber > 14 mils, polyethylene, polyvinyl chloride (PVC) S: 14 mils, or Viton > 14 mils).
4. Chemical resistant headgear for overhead exposure.
5. Protective eyewear USE REQUIREMENTS FOR PASTURES, PERENNIAL GRASSLANDS, GRASS GROWN FOR SEED, RANGELAND, FALLOW LAND AND NONCROP AREAS: Do not enter treated areas until spray has dried. For early entry to treated areas, wear eye protection, chemical-resistant gloves made of any waterproof material, long-sleeved shirt, long pants, shoes and socks. Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc This chemical has properties and characteristics associated with chemicals detected in groundwater. The use of this chemical in areas where soils are permeable, particularly where the water table is shallow, may result in groundwater contamination. Application around a cistern or well may result in contamination of drinking water or groundwater. Notify workers of application by warning them orally and by posting warning signs at entrances to treated area.

RESISTANCE MANAGEMENT To delay herbicide resistance, take one or more of the following steps: PRODUCT INFORMATION Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 4 If a weed pest population continues to progress after treatment with this product, discontinue use of this product, and switch to another management strategy or herbicide with a different mode of action, if available. For further information or to report suspected resistance, contact Helena Agri-Enterprises, LLC representatives at (901) 761-0050. Rotate the use of HM-1603 HERBICIDE or other Group 4 herbicides within a growing season sequence or among growing seasons with different herbicide groups that control the same weeds in a field. HM-1603 HERBICIDE is a postemergence herbicide for controlling a wide spectrum of annual, biennial, and perennial broadleaf weeds and brush in pastures, rangeland, and grass (hay, silage): grass grown for seed; sugarcane; teff; wheat; conservation reserve program land; postharvest, fallow, crop stubble, set- aside acres; general farmstead areas; certain noncrop areas; and for forest management. • Adopt an integrated weed-management program for herbicide use that includes scouting and uses historical information related to herbicide use and crop rotation, and that considers tillage (or other mechanical control methods), cultural (e.g., higher crop seeding rates; precision fertilizer application method and timing to favor the crop and not the weeds), biological (weed-competitive crops or varieties) and other management practices. For resistance management, HM-1603 HERBICIDE is a Group 4 mode of action herbicide containing 2,4- D acid and dicamba acid. Any weed population may contain or develop plants naturally resistant to HM- 1603 HERBICIDE and other Group 4 mode of action herbicides. The resistant biotypes may dominate the weed population if these herbicides are used repeatedly in the same field. Appropriate resistance management strategies should be followed. • Contact your local extension specialist or certified crop advisors for additional pesticide resistance-management and/or integrated weed-management recommendations for specific crops and weed biotypes. Use tank-mixtures with herbicides from a different group if such use is permitted: where information on resistance in target weed species is available, use the less resistance-prone partner at a rate that will control the target weed(s) equally as well as the more resistance-prone partner. Consult your local extension service or certified crop advisor if you are unsure as to which active ingredient is currently less prone to resistance. • Scout after herbicide application to monitor weed populations for early signs of resistance development. Indicators of possible herbicide resistance include; (1) failure to control a weed species normally controlled by the herbicide at the dose applied, especially if control is achieved on adjacent weeds; (2) a spreading patch of non-controlled plants of a particular weed species; (3) surviving plants mixed with controlled individuals of the same species. If resistance is suspected, prevent weed seed production in the affected area by an alternative herbicide from a different group or by a mechanical method such as hoeing or tillage. Prevent movement of resistant weed seeds to other fields by cleaning harvesting and tillage equipment when moving between fields, and planting clean seed.

Mode of Action APPLICATION INSTRUCTIONS CHEMIGATION PROHIBITION Do not apply this product through any type of irrigation system. Spray Coverage: Sensitive Crop Precautions: SPRAY DRIFT MANAGEMENT Droplet Size 5 Weeds must be thoroughly covered with spray. Dense leaf canopies shelter smaller weeds and prevent adequate spray coverage. A variety of factors including weather conditions (e.g. wind direction, wind speed, temperature, relative humidity) and method of application {e.g., ground, and aerial) can influence pesticide drift. The applicator must evaluate all factors and make appropriate adjustments when applying this product. For best results, thoroughly clean sprayer equipment (tank, lines and nozzles) immediately after use by flushing system with water and heavy duty detergent or other suitable tank cleaner. Apply HM-1603 HERBICIDE at the rates and growth stages listed in Tables 1 and 2 as follows unless instructed differently by section on “Food/Feed Crop Specific Information” or “Non-Food/Feed Use (Land not Harvested, Grazed or Foraged)-Specific Information.” HM-1603 HERBICIDE may be applied using water or sprayable fluid fertilizer as a carrier. Sprayable fluid fertilizer may be used as the carrier in preplant or pre-emergence use for all crops listed on this label. Postemergence uses with sprayable fluid fertilizer may be made on pasture, hayland, or wheat crops only. The most effective application rate and timing varies based on the target weed species (refer to Table I). In mixed populations of weeds the correct rate is determined by the weed species requiring the highest rate. Delaying application permits weeds to exceed the maximum size and will prevent adequate control. For certain specified applications liquid fertilizer or oil may replace part or all of the water as diluent. If dry flowable (DF), wettable powder (WP) or flowable (F) tank mix products are to be used, these should generally be added to the spray tank first. Refer to the mixing directions on the labels of the tank mix products. HM-1603 HERBICIDE may cause injury to desirable trees and plants, particularly beans, cotton, flowers, fruit trees, grapes, ornamentals, peas, potatoes, soybeans, sunflowers, tobacco, tomatoes and other broadleaf plants when contacting their roots, stems or foliage. At high temperatures (about 85 degrees or higher), vapors from this product may cause injury to the aforementioned susceptible crops. These plants are most sensitive to HM-1603 HERBICIDE during their development or growing stage. Do not treat areas where either possible downward movement into the soil or surface washing may cause contact of HM-1603 HERBICIDE with the roots of desirable trees and shrubs. Irrigation: In irrigated areas, it may be necessary to irrigate before treatment to ensure active weed growth. When applying sprays that contain 2,4-D as the sole active ingredient, or when applying sprays that contain 2,4-D mixed with active ingredients that require a coarse or coarser spray, apply only as a coarse or coarser spray (ASABE standard 572) or a volume mean diameter of 385 microns or greater for spinning atomizer nozzles. Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc HM-1603 HERBICIDE contains two active ingredients uniquely formulated to be used alone or tank mixed with other listed products as well as liquid fertilizer solutions. HM-1603 HERBICIDE is readily absorbed by plants through shoot and root uptake, translocates throughout the plant’s system, and accumulates in areas of active growth. HM-1603 HERBICIDE interferes with the plant’s growth hormones (auxins) resulting in death of many broadleaf weeds.

Wind Speed Temperature Inversions Susceptible Plants Other State and Local Requirements Equipment Table 1. Application Rate and Timing - Annual Weeds 1/3 pints 1 pints 2 pints 1-3" after branching Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 6 Applicators must follow all state and local pesticide drift requirements regarding application of 2,4-D herbicides. Where states have more stringent regulations, they must be observed. All aerial equipment and ground application equipment must be properly maintained and calibrated using appropriate carriers or surrogates. Applicators must follow maximum application rates in the Use Specific Information sections of the label. For use in non-food/feed crops only: the addition of liquid fertilizer (28-0-0, 32-0-0) solutions at 14 the GPA spray solution has shown to give increased efficacy. For aerial equipment, the boom length must not exceed 75% of the wingspan or 90% of the rotor blade diameter. Release spray at the lowest height consistent with efficacy and flight safety. Do not release spray at a height greater than 10 feet above the crop canopy unless a greater height is required for aircraft safety. This requirement does not apply to forestry or rights-of-way applications. If applying at wind speeds less than 3 mph, the applicator must determine if: a) conditions of temperature inversion exist, or b) stable atmospheric conditions exist at or below nozzle height. Do not make applications into areas of temperature inversions or stable atmospheric conditions. When applying sprays that contain 2,4-D mixed with other active ingredients that require a medium or more fine spray, apply only as a medium or coarser spray (ASABE standard 572) or a volume mean diameter of 300 microns or greater for spinning atomizer nozzles. Do not apply under circumstances where spray drift may occur to food, forage, or other plantings that might be damaged or crops thereof rendered unfit for sale, use or consumption. Susceptible crops include, but are not limited to cotton, okra, flowers, grapes (in growing stage), fruit trees (foliage), soybeans (vegetative stage), ornamentals, sunflowers, tomatoes, beans, and other vegetables, or tobacco. Small amounts of spray drift that might not be visible may injure susceptible broadleaf plants. When applications are made in a crosswind, the swath will be displaced downwind. The applicator must compensate for this by adjusting the path of the aircraft upwind. Do not apply at wind speeds greater than 15 mph. Only apply this product if the wind direction favors on- target deposition and are not sensitive areas (including, but not limited to, residential areas, bodies of water, known habitat for nontarget species, nontarget crops) within 250 feet downwind. If applying a Medium spray, leave one swath unsprayed at the downwind edge of the treated field. For ground boom application, do not apply with a nozzle height greater than 4 feet above the crop canopy. Weeds Controlled (including ALS - and tri azine-resistant) Beebalm, Spotted Broomweed Rate Per Acre (according to weed growth stage) 2/3 pints 3" branching 1 1 /8 pints pre-bloom branching 1 2/3 pints post-bloom

1/3 pints 1 pints 1 1/8 pints1 2/3 pints2 pints 1-6" 1-6" Flowering early bloom late bloom 1-3" 6-12" 12-18" 1-4" 12-30" 10-15" 2-6" 4-8" 8"

3" runners Kochia 1-6" 6-10" 10-20" 1-6" 6-10" 10-20" < 3" < 3" rosette 1-3" 3-6" 3-10" mature < 3" 3-8" 10" 1-3" 3-6" 6-10" actively growing Rosette <4" 4-12" Prior to flower1-4" Rosette 1-3" 3-6" < 6" 6-20" >20" 1 Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 7 prior to flower actively growing preflower Pre-bolt actively growing actively growing actively growing pre-flower pre-flower Seedling pre-flower pre-flower Rosette Rate Per Acre (according to weed growth stage) 2/3 pints post-flower early bolt < 2" < 2" V4^ < 3" < 3" < 3" 73" < 3" flower Post-bolt: Up to 4" after branching Purslane, Common Ragweed, Common Western, Lanceleaf Sedge^ Shepherdspurse Smartweed, Pennsylvania_________ Sneezeweed, Bitter Sowthistle Sunflower Thistle, Russian Velvetleaf For use in non-food/feed crop only. Adding crop oil concentrate has shown to improve performance on actively growing annual sedge. Pigweed, Prostrate , Redroot , Smooth , Tumble Poorjoe Weeds Controlled (including ALS - and triazine-resistant) Buckwheat, Wild Buffalobur Burdock Buttercup Chickweed, Common Cockle, Cow Cocklebur, Common Coreopsis, Plains Croton, Woolly Dogfennel Evening Primrose Flax Fleabane, Annual Fixweed Henbit Horseweed/ Marestail___________ Knotweed Spp. flower bolting < 3" 1-6" 1-6" 4-12" Lambsquarters, Common__________ Mallow, Common Morning glory. Ivyleaf Tr^iii Mustards, Annual , Tansy Pennycress, Field Peppenveed, Virginia 6-24" rosette < 3" runners

Table 2. Application Rate and Timing - Biennial and Perennial Weeds. Weeds Controlled1/3 pints 1 pints1 1/8 pints1 2/3 pints 2-3" full leaf flower early bolting Pre-flower Rosette bolting spring or fall prior to bolting after bolting actively growing 3-15" flower Rosettepost-bolting spring or fall flower or berry after bloom <12" 12"/prebloom rosette rosette Rosetteboltingflower Rosettebolting actively growing Rosette 1-4" 4-8" Rosette Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 8 Applicators must follow maximum application rates in the Use Specific Information sections of the label. The addition of liquid fertilizer (28-0-0, 32-0-0) at >2 the GPA of the spray solution has proven to give increase suppression or control on certain species of weeds. Rate Per Acre (according to weed growth stage) 2/3 pints actively growing actively growing actively growing pre-flower full flower full flower 45-90 days after budbreak Flower actively growing actively growing actively growing actively growing actively growing actively growing actively growing actively growing full leaf 2 -31/4 pints actively growing Milkweed, Antelopehorn^ Nightshade, Silverleaf ,Black^ Persimmon. Eastern^ Prickly, Lettuce Rabbitbrush^ Ragwort, Tansy Redvine^ Sagebrush, Fringed^ Smartweed Sorrel, Red Sowthistle^ Spurge, Leafy^ Tallow Tree, Chinese* Thistle, Bull , Canada^ , Musk , Plumeless Vetch, Hairy Yankeeweed Yellow Starthistle** Bindweed, Field Bittercress Buckeye species^ Bullnettle^ Chicory Clove, Bur Dandelion, Common Dewberry, Southern^ Dock, Curly Elderberry^ Goldenrod, Missouri Groundsel, Texas Honeysuckle, Hairy Horsenettle, Carolina^ Ivy, Poison Knapweed, Black^ , Russian^ , Spotted Marshelder Mesquite^ rosette! bolting bolting 8" full flower 10-18"

Ground Application (Banding) Ground Application (Broadcast) Spot or Small Area Application Do not make spot treatments in addition to broadcast or band treatments. Table 3. - Knapsack Sprayer Dilution Instructions ADDITIVES Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 9 Water volume: Use 10-25 gallons of spray solution per broadcast acre for optimal performance. Use the higher spray volume when treating dense or tall vegetation. Bandwidth in inches Row width in inches Bandwidth in inches Row width in inches Application Equipment: Select nozzle design to produce minimal amounts of fine spray particles. Spray nozzles as close to the weeds as is practical for good weed coverage. HM-1603 HERBICIDE may be applied to individual clumps or small areas of undesirable vegetation using handgun or similar types of application equipment. Apply diluted sprays to allow complete wetting (up to runoff) of foliage and stems. For knapsack or other small capacity sprayers, prepare a solution of HM- 1603 HERBICIDE in water according to Table 3 - (assuming that the spot treatment rate equates to 40 gallons per acre on the broadcast basis.) Adding a surfactant (0.5% by volume) can help improve control. Application equipment: Select nozzles designed to produce minimal amounts of fine spray particles. Spray with nozzles as close to the weeds as is practical for good weed coverage. To improve burndown of emerged weeds, surfactants and/or low use rates of liquid fertilizers (28-0-0; 32- 0-0), or crop oil concentrate may be used with HM-1603 HERBICIDE or HM-1603 HERBICIDE tank mixes applied after the weeds have emerged. Crop oil concentrate is for non-food/feed crop uses only. Do not apply tank mixes that include Ammonium Sulfate or Crop Oil Concentrate to any food/feed crop use listed on this label. For food/feed crop use, do not use liquid fertilizers that contain Ammonium Sprayer Capacity ______________(gallons of water) ___________________1 gallon __________________3_gallons __________________5_gallons

• 1 fluid ounce = 2 tablespoons When applying HM-1603 HERBICIDE by banding, determine the amount of herbicide and water volume needed using the following formula: Amount of HM-1603 HERBICIDE® to add to the spray tank 2/3 fluid ounce* 2 fluid ounces 3 fluid ounces X Broadcast rate = Banding water volume per acre volume per acre X Broadcast rate = Banding herbicide per acre rate per acre May require repeat applications 2 Specified rate will provide top growth suppression only. For improved root kill or woody species such as mesquite and eastern persimmon spray 2 pints of per acre HM- 1603 HERBICIDE each year for 3 consecutive years. Under dense populations, a second application may be needed the following growing season. For increased control of weeds such as blackberry and dewberry, HM-1603 HERBICIDE may be tank mixed with a metsulfuron-methyl herbicide, if labeled for the use site.

TANK MIXING INFORMATION 10 Tank Mix Partners/Components It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. Sulfate (AMS) as a source of nitrogen as tolerances in commodities derived from the crop may contain residues that exceed established tolerances. Nitrogen Source Sprayable liquid fertilizers: Use % GPA of sprayable liquid fertilizers (28-0-0; 32-0-0) per acre. Do not use brass or aluminum nozzles when spraying fertilizers. Oil Concentrate A crop oil concentrate must contain either a petroleum or vegetable oil base and must meet all of the following criteria: The exact composition of suitable products will vary; however, vegetable oil and petroleum oil concentrates should contain emulsifiers to provide good mixing quality. Highly refined vegetable oils have proven more satisfactory than unrefined vegetable oils. For additional information, see Compatibility Test for Mix Components. be non-phytotoxic contain only EPA-exempt ingredients provide good mixing quality in the jar test, and be successful in local experience Adjuvants containing crop oil concentrates may be used for preplant, pre-emergence and between cropping applications. Do not use crop oil concentrate for postemergence applications in food/feed crops (i.e. grass (hay or silage), grass grown for seed, pastures, rangeland, and wheat) Non-ionic Surfactant The standard label recommendation is 2-4 pints of an appropriate 80% active non-ionic spray surfactant per 100 gallons of water. (Rate will vary with the size and condition of weeds to be controlled. Use lowest rate per 100 gallons when weeds are small and actively growing. As weeds increase in size and or become hardened off, the rate of non-ionic surfactant will have to be increased to give optimum coverage and control.) The following active ingredients may be tank mixed with HM-1603 HERBICIDE according to the specific tank mixing instructions in this label and respective product labels. Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc Rate Additive Per Acre 2-4 pints per 100 gallons^ Vi of spray solution 1 quart Table 4. Additive Rate Per Acre.__________________ Additive^__ Non-ionic Surfactant_ Sprayable Liquid Fertilizers (28-0-0; 32-0-0)______ Crop Oil Concentrate | See manufacturer’s label for specific rate specifications. 2 Use lowest rate per 100 gallons when weeds are small and actively growing. As weeds increase in size and or become hardened off, the rate of non-ionic surfactant will have to be increased to give optimum coverage and control.

Always cap the jar and invert 10 cycles between component additions. Mixing Order

• If sprayable fluid fertilizer is used as the carrier. RESTRICTIONS AND LIMITATIONS 11 Compatibility Test for Mix Components Before mixing components, always perform a compatibility jar test. Always perform the Compatibility Test before mixing into the spray tank. Also, when using a sprayable fluid fertilizer as the carrier, any product contained in PVA bags must first be completely dissolved in water before the contents can be added to the fertilizer mix. For 20 gallons per acre spray volume, use 3.3 cups (800 ml) of water. For other spray volumes adjust accordingly. Only use water from the intended source at the source temperature. Add components in the sequence indicated in the Mixing Order using 2 teaspoons for each pound or 1 teaspoon for each pint of specified label rate per acre. • Maximum seasonal use rate: Refer to Table 5. Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc When the components have all been added to the jar, let the solution stand for 15 minutes. Evaluate the solution for uniformity and stability. The spray solution should not have free oil on the surface, nor fine particles that precipitate to the bottom, nor thick (clabbered) texture. If the spray solution is not compatible, repeat the compatibility test with the addition of a suitable compatibility agent. If the solution is still incompatible, do not mix the ingredients in the same tank. picloram__________ pronamide________ prosulfuron_______ quinclorac________ terbacil___________ thifensulfuron-methyl triasulfuron________ tribenuron-methyl If an inductor is used, rinse it thoroughly after each component has been added. Maintain constant agitation during application.

1. Water. Begin by agitating a thoroughly clean sprayer tank half full ofclean water.
2. Agitation. Maintain constant agitation throughout mixing and application.
3. Products in PVA bags. Place any product contained in water-soluble bags into the mixing tank. Wait until all water-soluble PVA bags have fully dissolved and the product is evenly mixed in the spray tank before continuing.
4. Water-dispersible products (such as dry flowables, wettable powders, suspension concentrates, and suspo-emulsions)
5. Water-soluble products (such as HM-1603 HERBICIDE).
6. Emulsifiable concentrates (such as oil concentrate, when applicable).
7. Water-soluble additives (such as liquid fertilizers (28-0-0; 32-0-0), when applicable).*
8. Remaining quantity of water. diuron__________ fenoxaprop-p-ethyl glyphosate_______ halosulfuron-methyl metribuzin_______ metsulfuron-methyl MCPA __________ paraquat-dichloride See “Food/Feed Crop Specific Information” section for more information for more details. Read and follow the applicable Restrictions and Limitations and Directions for Use on all products involved in tank mixing. The most restrictive labeling applies to tank mixes. Physical incompatibility, reduced weed control, or crop injury may result from mixing HM-1603 HERBICIDE with other pesticides (fungicides, herbicides, insecticides, or miticides), additives, or fertilizers. 2,4-D___________ alachlor_________ ametryn_________ asulam_________ atrazine_________ bentazon________ carfentrazone-ethyl clopyralid________ chlorsulfuron

CROP All other crops 120 120 120 Crop Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 12 60 90 Maximum Rate Per Acre Aircraft Application DO NOT ROTATE • Preharvest Interval (PHI): Refer to “Food/Feed Crop Specific Information” • Restricted entry Interval (REI): 48 Hours • Crop Rotational Restrictions: The interval between application and planting rotational crop is given below. Always exclude counting days when the ground is frozen. Planting at intervals less than specified below may result in crop injury. Moisture is essential for the degradation of this herbicide in soil. Livestock Grazing or Feeding^ Application Restrictions: • Make only one Corn preplant application per crop cycle • Make only one Soybean preplant application for the 15 day plantback interval. • Do not apply to crops that show injury (leaf phytotoxicity or plant stunting) produced by any other prior herbicide applications, because this injury may be enhanced or prolonged. • Do not apply this product though any type of irrigation equipment. Do not contaminate irrigation ditches or water used for domestic purposes. • This product cannot be used to formulate or reformulate another pesticide product. Application Precautions: • Arid (dry) conditions: it is extremely important that the addition of a suitable Nonionic Surfactant, Oil, or sprayable fertilizer be used when applying HM-1603 HERBICIDE. Higher rates of HM-1603 HERBICIDE may be needed to control susceptible weeds in this environment. • Rainfast Period: Rainfall or irrigation occurring within 4 hours after postemergence applications may reduce effectiveness of HM-1603 HERBICIDE. • Stress: Do not apply to crops under stress such as stress due to lack of moisture, hail damage, flooding, herbicide injury, mechanical injury, or widely fluctuating temperatures, as unsatisfactory control may result. 21 14 120 120 120 120 30 21 90 60 120 120 120 120 45 21 21 45 30 45 Table 5. Crop Specific Restrictions and Limitations. Maximum Rate Per Acre 2/3 — 1 pints/A 7 2/3-1 pints/A 30Corn (field and pop)** Cotton_______ Barley, Oats, Wheat and other small grains_______ Sorghum_____ Soybean*** 14 15 (one application) 30 (two applications) 120 MINIMUM DAYS PLANT BACK INTERVAL (Areas > rainfall or irrigation after ____________application)*

1-3 1/2 pints/A 21 3 1/2 pints/A 120 MINIMUM DAYS PLANT BACK INTERVAL (Areas < Ya” rainfall or irrigation after ____________application) 1-3 1/2 pints/A 60 3 1/2 pints/A 120 DO NOT ROTATE *NOTE: A cumulative 1/2 inches of rainfall or irrigation must occur in 2 or less rainfalls and/or irrigations before calculating plantback interval. **Make only one Corn preplant application per crop cycle ***Make only one Soybean preplant application for the 15 day plantback interval.

Yes Yes 1 FOOD/FEED CROP SPECIFIC INFORMATION PASTURES, RANGELAND AND GRASS (Hay, Silage) Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 13 Refer to Tables 1 and 2 for rate selection based on targeted weed or brush species. Some weed species will require tank mixes for adequate control. When perennial weeds are reaching maturity, mowing and allowing some regrowth will enhance control. Difficult to control weeds may require a repeat application. Do not use on bentgrass, susceptible grass pastures (such as carpetgrass, buffalograss, or St. Augustine grass), lezpedeza, wild winter peas, vetch, clover, and alfalfa pastures as injury will occur. Pre-harvest Interval (PHI); Dry hay and Silage; Treated grasses may be harvested for dry hay or silage but do not harvest within 7 days of treatment. Uses described in this section also pertain to small grains (including barley, corn, oats, rye, sudangrass, or wheat) grown for pasture, hay, and silage only. Newly seeded areas including small grains grown for pasture or hay, may be injured if rates of HM-1603 HERBICIDE are greater than 1 1/4 pints per acre are applied. In newly established hybrid Bermudagrass, Pangolagrass, and stargrasses {Cynodon spp.) use 1 to 2 pints of HM-1603 HERBICIDE per acre to control or suppress weeds after planting vegetative propagules (stolens) of hybrid bermudagrasses. In addition to the weeds listed in Tables 1 and 2, this rate of HM- 1603 HERBICIDE will control or suppress annual sedges, broadleaf signalgrass, crabgrass, and goosegrass. Best results will be obtained if HM-1603 HERBICIDE is applied at the germinating stage of weeds. Under favorable conditions, this is usually 7-10 days after planting these grasses. Reduced control can be expected if weeds are allowed to reach 1” in height before application or if germination of weeds occurs 10 days after application. Grazing and Feeding Lactating Animals; Do not graze lactating dairy animals within 7 days of treatment. Grazing and Feeding Non-Lactating Animals; There is no waiting period between treatments and grazing for non-lactating animals. Do not permit meat animals being finished for slaughter to graze treated fields within 30 days of slaughter. For pasture renovations, wait 3 weeks per 1 1/4 pints of HM-1603 HERBICIDE used per acre before interseeding or injury may occur. 2 1/2 pints 2 pints 5 pints 4 pints Per Application 3 2/3 pints 1 1/4 pints 4 pints 2 pints 8 pints Yes Yes Yes Yes Yes Yes Yes Yes HM-1603 HERBICIDE may be used for pasture (including pasture grown for hay), rangeland, grass grown for hay or silage, fallow systems, Conservation Reserve Programs, and general farmstead (non-cropland only). Between Crop Applications______ Pasture, Hay, Silage Grass Grown for Seed___________ Wheat__________ Sugarcane_______ Refer to “Food/Feed Crop Specific Information” for grazing and feeding restrictions. Per Season 7-1/3 pints

PASTURE & RANGELAND RESTRICTIONS: GRASS GROWN FOR SEED GRASS GROWN FOR SEED RESTRICTIONS: SUGARCANE Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 14 Metsulfuron-methyl Triasulfuron HM-1603 HERBICIDE contains 0.30 pounds a.e. of 2,4-D per pint. When tank mixing with products that contain 2,4-D, do not exceed a combined totai of 4.0 pounds of a.e. per acre per year. For ground appiications appiy in 10-20 gallons of spray solution per acre. For aeriai appiications appiy in 5-10 galions of spray soiution per acre. Pasture and Rangeiand Tank Mixes - HM-1603 HERBICIDE may be appiied in tank mixes with one or more of the following herbicides: Do not apply more than 2-1/2 pints per acre per application. Rates above 2-1/2 pints of HM-1603 HERBICIDE per acre are for spot treatments only Do not make more than 2 applications per year. Minimum spray interval between applications is 30 days. If grass is to be cut for hay, Agricultural Use requirements for the Worker Protection Standard are applicable. For spot treatment, do not exceed 4.4 pints per acre per application, or 8.8 pints per acre per year. On newly established stands, the grass must have at least reached the 1 tiller stage prior to treatment. On established stands, where at least one seed crop has been harvested, two applications separated by 30 days may be made with rates up to 2 pints per acre. HM-1603 HERBICIDE contains 0.225 pounds a.e. of dicamba per pint. If applied with other products containing dicamba, either as a tank mix or separately during the same growing season do not exceed 2.0 lbs of dicamba a.e. per acre per crop cycle. Apply HM-1603 HERBICIDE in the spring or fall when broadleaf weeds are in the 2-4 leaf stage and rosettes are less than 2 ” across. Larger or more difficult to control broadleaf weeds may require high rates of HM-1603 HERBICIDE and a tank mix partner for optimum control. To control many species of emerged broadleaf weeds, apply % to 2 pints per acre. Use on newly established or established stands of cool season grasses grown for seed including bentgrasses, bluegrasses, fine fescues, tall fescue, orchardgrass, annual ryegrass and perennial ryegrass. Do not make more than 2 applications per year. Do not apply to grasses in the boot stage of development. The maximum individual application rate is 2 pints per acre per application. The retreatment interval is 30 days. Do not use more than 4 pints of HM-1603 HERBICIDE per acre per year.

SUGARCANE RESTRICTIONS: TEFF HM-1603 HERBICIDE may be applied by ground or air. Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 15 The larger the weed, the population and environmental conditions will require the higher end of the rate range to achieve the satisfactory control especially for many of the perennial weeds. For ground applications, apply in 10 to 20 gallons of total broadcast spray mix per acre. For aerial application, apply in 3 to 10 gallons of water per acre. Applications of HM>1603 HERBICIDE can be made any time after the weeds have emerged and are actively growing but prior to the close-in stage of sugarcane. When possible, direct the spray beneath the sugarcane canopy in order to minimize the likelihood of crop injury. The use of directed sprays will also aid in maximizing spray coverage of weed foliage. Application rates and timing are given below. Use the higher level of listed rate ranges when treating dense vegetative growth. SUGARCANE Tank Mixes; HM-1603 HERBICIDE may be tank mixed with one or more of the following herbicides: ametryn, asulam, atrazine, metribuzin, terbacil HM-1603 HERBICIDE contains 0.30 pounds a.e. of 2,4-D per pint. When tank mixing with products that contain 2,4-D, do not exceed a combined total of 4.0 pounds of a.e. per acre per year. Pre-emergent Application: Do not make more than one pre-emergence application per crop cycle. Pre-emergent Application: Do not apply more than 4 pints per application. Post-emergent Application: Do not make more than one post-emergence application per crop cycle. Post-emergent Application: Do not apply more than 4 pints per application. Do not harvest cane prior to crop maturity. Preharvest interval (PHI) is 87 days. To control emerged broadleaf weeds, apply 0.75 - 1.25 pints of HM-1603 HERBICIDE per acre. Apply after the two-leaf stage and prior to the boot stage. Refer to “Plant Response” and “Livestock Feeding Restrictions” under the GRASS PASTURES section of the label. HM-1603 HERBICIDE contains 0.225 pounds a.e. of dicamba per pint. If applied with other products containing dicamba, either as a tank mix or separately during the same growing season do not exceed 2.0 lbs of dicamba a.e. per crop cycle. PASTURES, RANGELAND AND GRASS (Hay, Silage) In newly established Teff, use 0.75 to 1.25 pints of HM-1603 HERBICIDE per acre to control or suppress weeds after planting. Newly seeded areas including small grains grown for pasture or hay, may be injured if rates of HM-1603 HERBICIDE are greater than 1.25 pints per acre are applied. Apply after the two-leaf stage and prior to the boot stage. For control of listed ANNUAL broadleaf weeds, apply 1 quart of HM-1603 HERBICIDE per treated acre. For suppression of listed PERENNIALS, apply 1 -2 quarts of HM-1603 HERBICIDE per treated acre. GRASS SEED CROPS HM-1603 HERBICIDE application rates and spray volumes will vary with the growth stage and population of broadleaf weeds to be controlled. In general the smaller the weed, the lower use of the specified rate range will provide satisfactory control.

TEFF RESTRICTIONS: The Restricted Entry Interval (REI) is 48 hours. The Pre-harvest Interval (PHI)(Not for Dry Hay and Silage) is 14 days. Limited to one postemergence application per crop cycle. Limited to one preharvest application per crop cycle. If small grains are grown for pasture or hay only, refer to Pastures, Rangeland and Grass (Hay, Silage). Do not graze or harvest for livestock feed prior to crop maturity. Do not use HM-1603 HERBICIDE in wheat underseeded with legumes. SPECIFIC USE PROGRAMS FOR FALL-SEEDED WHEAT ONLY: Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 16 Pre-harvest Interval (PHI); Dry Hay and Silage; Treated grasses may be harvested for dry hay or silage but do not harvest within 37 days of treatment. SMALL GRAIN CROPS (Grains used for Gluten-Free Flour) Apply up to 1.25 pints of HM-1603 HERBICIDE per acre to Teff. Apply after the two-leaf stage and prior to the boot stage. If small grains are grown for pasture or hay only, refer to Pastures, Rangeland and Grass (Hay, Silage). Grazing and Feeding Lactating Animals: Do not graze lactating dairy animals within 7 days of treatment Grazing and Feeding Non-Lactating Animals; There is no waiting period between treatments and grazing for non-lactating animals. Do not permit meat animals being finished for slaughter to graze treated fields within 30 days of slaughter. Up to 3/4 pints of HM-1603 HERBICIDE per acre may be applied post emergent on fall-seeded wheat after the wheat begins to tiller for suppression of perennial weeds, such as field bindweed. Applications may be made in the fall following a frost but before a killing freeze. Periods of extended stress such as cold and wet weather may enhance the possibility of crop injury. For fall applications only, do not use if the potential for crop injury is not acceptable. Early season applications to fall-seeded wheat must be made after tillering and prior to the jointing stage. Care should be taken in staging early developing wheat varieties such as TAM 107, Madison, or Wakefield to be certain that the application occurs prior to the jointing stage. WHEAT (Fall and Spring-seeded) EARLY SEASON POST EMERGENCE APPLICATION (Fall and Spring Seeded): Apply 1-1/4 pint of HM-1603 HERBICIDE per acre to wheat unless using one of the wheat specific programs below. Early season applications to spring-seeded wheat must be made after tillering and before wheat reaches the 6-leaf stage.

PREHARVEST APPLICATIONS: Preharvest use of HM-1603 HERBICIDE is not registered for use in California. Tribenuron-methyl Fallow Systems, Conservation Reserve Programs, and General Farmstead WHEAT RESTRICTIONS: Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 17 Do not use preharvest-treated wheat for seed unless a germination test is performed on the seed with an acceptable result of 95% germination or better. For control of additional broadleaf weeds or grasses, HM- 1603 HERBICIDE may be tank mixed with other herbicides such as glyphosate and metsulfuron-methyl that are registered for preharvest use in wheat. Do not graze or harvest for livestock feed prior to crop maturity. Do not use HM-1603 HERBICIDE in wheat underseeded with legumes. Postemergence: • Make no more than one application per crop cycle. • Do not apply more than 1-1/4 pints per acre per application. Preharvest: • Make no more than one application per crop cycle. • Do not apply more than 1 1/4 pints per acre per application. • Pre-Harvest interval is 14 days. HM-1603 HERBICIDE can be used to control weeds that may interfere with harvest of wheat. Apply up to 1 1/4 pints of HM-1603 HERBICIDE per acre as a broadcast or spot treatment to annual broadleaf weeds when wheat is in the hard dough stage and the green color is gone from the nodes (joints) of the stem. Best results will be obtained if application can be made when weeds are actively growing but before weeds canopy. HM-1603 HERBICIDE contains 0.225 pounds a.e. of dicamba per pint. If applied with other products containing dicamba, either as a tank mix or separately during the same growing season do not exceed 2.0 lbs of dicamba a.e. per acre per crop cycle. These uses are considered Food/Feed Crops when harvested, grazed or foraged. Consult section on “Tank Mixing Information” for adjuvant restrictions and section on “Additives” for specific use directions. Metsulfuron-methyl Prosulfuron________ Triasulfuron________ Thifensulfuron-methyl Diuron__________ Fenoxyprop-p-ethyl MCPA __________ Metribuzin HM-1603 HERBICIDE contains 0.30 pounds a.e. of 2,4-D per pint. When tank mixing with products that contain 2,4-D, do not: • Exceed a combined total of 1.25 pounds of a.e. per acre per crop cycle of 2,4-D for post emergent use. • Exceed 0.5 pounds of a.e. per acre per crop cycle of 2,4-D for pre-harvest application. • Exceed a total of 1.75 pounds of a.e. per acre per crop cycle for all uses. Table 6 - Wheat Tank Mixes HM-1603 HERBICIDE can be tank mixed with one or more of the following herbicides Bromoxynil_______ Carfentrazone-ethyl Chlorsulfuron_____ Clopyralid________ 1 Do not use low rates of sulfonylurea herbicide on more mature weeds or on dense vegetative growth. 2 Do not use as a tank mix treatment with Fenoxyprop-p-ethyl or MCPA on Durum wheat. ® Tank mixes with Diuron and Metribuzin are for use in fall-seeded wheat only.

BETWEEN CROP APPLICATIONS Rates and Timings: Between Crop Tank Mixes: APPLICATIONS TO FALLOW GROUND PRIOR TO PLANTING COTTON Rates and Timings Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 18 NON-FOOD/FEED USE (LAND NOT HARVESTED, GRAZED OR FORAGED) - SPECIFIC INFORMATION. Paraquat dichloride Picloram Pronamide Quinclorac Triasulfuron Atrazine Carfentrazone-ethyl Chlorsulfuron Glyphosate Metribuzin Metsulfuron-methyl Avoid disturbing treated areas following application. Treatments may not kill weeds that develop from seed or underground plant parts such as rhizomes or bulblets, after the effective period for HM>1603 HERBICIDE. For seedling control, a follow-up program or other cultural practices could be instituted. HM-1603 HERBICIDE can be applied postharvest in the fall, spring, or summer during the fallow period or to crop stubble/set-aside acres. Apply to weeds after crop harvest (postharvest) and before a killing frost or in the fallow cropland or crop stubble the following spring or summer. To aid in suppressing certain perennial or biennial broadleaf weeds (including cotton regrowth), this product may be applied either alone or in combination with other registered herbicides. For cotton regrowth, a minimum rate of 1 1/5 pints/acre is recommended. See “Restrictions and Limitations” for the recommended interval between application and planting to prevent crop injury. In tank mixes with one or more of the following herbicides, apply 1.0 -1.25 pints of HM-1603 HERBICIDE per acre for control of annual weeds, or 1.25 - 4.25 pints of HM-1603 HERBICIDE per acre for control of biennial and perennial weeds PREPLANT DIRECTIONS (POSTHARVEST, FALLOW, CROP STUBBLE, SET-ASIDE) FOR BROADLEAF WEED CONTROL Apply 1-3 2/3 pints of HM-1603 HERBICIDE per acre. Refer to Table 1 to determine use rates for specific targeted weed species. For best performance, apply HM-1603 HERBICIDE when annual weeds are less than 6" tall, when biennial weeds are in the rosette stage and to perennial weed regrowth in late summer or fall following a mowing or tillage treatment. The most effective control of upright perennial broadleaf weeds such as Canada thistle and Jerusalem artichoke occurs if HM-1603 HERBICIDE is applied when the majority of weeds have at least 4-6" of regrowth or for weeds such as field bindweed and hedge bindweed that are in or beyond the full bloom stage. The addition of liquid fertilizers (28-0-0, 32-0-0) at % GPA has shown to increase efficacy.

Cropping Restrictions Tank Mix Treatments BETWEEN CROP APPLiCATION RESTRICTIONS: CONSERVATION RESERVE PROGRAMS CONSERVATION RESERVE PROGRAMS RESTRICTIONS: Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 19 Apply HM-1603 HERBICIDE as a broadcast or spot treatment to emerged and actively growing weeds at the rate of 1 to 3-2/3 pints per acre. The most effective control of weeds occurs if application is made when weeds are in the 2-4 leaf stage and rosettes are less than 2" across Refer to Tables 1 and 2 for rate selection based on targeted weed or brush species. Some weed species will require tank mixes for adequate control. Refer to the Crop Rotational Restrictions Table in Section V. RESTRICTIONS AND LIMITATIONS for appropriate pre-plant application intervals for cotton. HM-1603 HERBICIDE contains 0.30 pounds a.e. of 2,4-D per pint. When tank mixing with products that contain 2,4-D, do not exceed a combined total of 4.0 pounds of a.e. per acre per year. For control of grasses or additional broadleaf weeds, HM-1603 HERBICIDE may be tank mixed with prometryn, paraquat, and glyphosate herbicides For program lands, including Conservation Reserve Program, consult program rules to determine whether grass or hay may be used. The more restrictive requirements of the program rules or this label must be followed. • Do not apply more than 3-2/3 pints per acre per application. • Do not make more than 2 applications per year. • Minimum spray interval between applications is 30 days. • Only labeled crops can be planted within 30 days of application. Do not apply more than 4 pints per acre per application. Do not make more than 2 applications per year. Minimum spray interval between applications is 30 days. If grass is to be cut for hay, Agricultural Use requirements for the Worker Protection Standard are applicable. HM-1603 HERBICIDE contains 0.225 pounds a.e. of dicamba per pint. If applied with other products containing dicamba, either as a tank mix or separately during the same growing season do not exceed 2.0 lbs of dicamba a.e. per acre per crop cycle. HM-1603 HERBICIDE contains 0.225 pounds a.e. of dicamba per pint. If applied with other products containing dicamba, either as a tank mix or separately during the same growing season do not exceed 2.0 lbs of dicamba a.e. per crop cycle. HM-1603 HERBICIDE may be used on Conservation Reserve Programs, general farmstead {non­ cropland only), weed and brush control, or use in State Recognized Noxious Weed areas (non-cropland areas).

GENERAL FARMSTEAD Farmstead and Fence-row Treatment Application Instructions To prepare soil and water emulsions, mix in the order and proportions indicated below. 1. FOR SPRAYING FOLIAR APPLICATIONS: 4. FOR DORMANT BASAL APPLICATIONS: 5. FARMSTEAD AND FENCEROW RESTRICTIONS: Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 20 2. 3. 4. 1. 2. 3. 1. 2. 3. 4. HM-1603 HERBICIDE contains 0.30 pounds a.e. of 2,4-D per pint. When tank mixing with products that contain 2,4-D, do not exceed a combined total of 4.0 pounds of a.e. per acre per year. Spray when leaves have reached full size but have not hardened due to drought or maturity. Spray individual plants to wet with handgun. For larger stems (up to 3" in diameter) and hard to control species, direct spray stream to base of stems to wet the stem at soil surface in addition to wetting the foliage. Do not apply under drip line of desirable trees or adjacent to desirable vegetation. The solution should remain milky colored without an oily layer on top when under agitation. If an oily layer forms, increase the amount of emulsifier or change to a more effective emulsifier. Do not exceed 40 gallons of spray solution per treated acre per application. 4 pints of HM-1603 HERBICIDE in forty gallons of spray solution contains 0.9 pounds acid equivalent of dicamba and 1.2 pounds acid equivalent of 2,4-D. Spray plants to wet. Do not allow this spray mix to contact desirable vegetation. Water; Begin by agitating a thoroughly clean sprayer tank with the desired quantity of clean water. Maintain constant agitation during complete mixing procedure. Emulsifier: Add 0.5% volume to volume of water. HM-1603 HERBICIDE: add 1.5 gallons per 100 gallons of total intended solution. Diesel Oil; Add 10 gallons per 100 gallons of total intended solution. Increase diesel oil content to 15% or 15 gallons of diesel oil per 100 gallons of total solution. Spray in late winter and early spring before plants break dormancy. Spray the bottom 24" of the target stem to wet on all sides. For larger stems (up to 3" in diameter) and hard to kill species direct the spray solution to the base of target stems to wet the soil at the stem/soil junction in addition to wetting the stem. Do not apply under drip line of desirable trees or adjacent to desirable vegetation. HM-1603 HERBICIDE may be applied using water or oil and water emulsions in spot application to control undesirable vegetation using handgun or similar types of application equipment. In addition to weed species listed in Tables 1 and 2, these treatments may be used to control or suppress woody plant species listed in Table 7. To control brush, briars, and weeds along fence-rows surrounding pasture and ranch lands, and fallow fields, use a tank mix of 1.5% HM-1603 HERBICIDE, 88.5% water, 10% diesel oil, and sufficient emulsifier (to mix the diesel and emulsifier). The diesel oil in this tank mix will damage or kill desirable grasses and should not be used in pastures or where damage to desirable species cannot be tolerated. Maintain constant agitation during application. Under good agitation, the spray solution should be milky white with no oil layer on top. If oil layer forms, increase the amount of emulsifier or change to a more effective emulsifier.

FOR CUT SURFACE TREATMENTS CUT SURFACE RESTRICTIONS: Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 21 Table 7. The following list of trees and vines can be controlled on farmsteads and fencerows as foliar, basal, or cut surface treatments: HM-1603 HERBICIDE contains 0.30 pounds a.e. of 2,4-D per pint. When tank mixing with products that contain 2,4-D, do not exceed a combined total of 4.0 pounds of a.e. per acre per year. Apply HM-1603 HERBICIDE in an undiluted state as a cut surface treatment to control unwanted trees and prevent sprouts of cut trees. Applications to non-cropland areas are not applicable to treatment of commercial timber or other plants being grown for sale or other commercial use, or for commercial seed production, or for research purposes. Postemergence (annual & perennial weeds); • Do not make more than 2 applications per year. • Do not apply more than 4 pints per acre per application. • Minimum spray interval between applications is 30 days. Postemergence (woody plants): • Do not make more than 1 application per year. • Do not apply more than 4 pints per acre per application. Frill or Girdle Treatments; Make a continuous cut or a series of overlapping cuts using an axe to girdle tree trunk. Spray or paint the cut surface with HM-1603 HERBICIDE. • Stump Treatments: Spray or paint freshly cut surface with HM-1603 HERBICIDE. The cambium layer (the area adjacent to the bark) should be thoroughly wet. Treat stumps within 6 hours after cutting. HM-1603 HERBICIDE contains 0.225 pounds a.e. of dicamba per pint. If applied with other products containing dicamba, either as a tank mix or separately during the same growing season do not exceed 2.0 lbs of dicamba a.e. per crop cycle. Poplar Rabbitbrush Redcedar, Eastern Rose, McCartney Rose, Multiflora Sagebrush, Fringe Sassafras Spruce Sumac Sweetgum Sycamore Tarbrush Willow Witch hazel Yaupon Yucca Alder Ash Aspen Basswood Beech Blackberry Blackgum Cedar Cherry Chinquapin Cottonwood Creosotebush Dewberry Dogwood Elm Grape Greenbriar Hawthorn (Thornapple) Hemlock Hickory Honeylocust Honeysuckle Hornbeam Huckleberry Huisache Ivy, Poison Kudzu Locust, Black Maple Mesquite Oak Oak, Poison Olive, Russian Persimmon, Eastern Pine Plum, Sand (Wild Plum)

Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 22 Foliage Spray: To control alder and susceptible woody plants before planting forest seedlings, apply up to 2 quarts of HM>1603 Herbicide per acre In a minimum of 10 gallons spray mixture per acre. If desired, apply as a water spray including up to 1 quart of diesel oil, fuel oil, stove oil, or crop oil concentrate per gallon of water (see "Mixing Instructions"). For best results, apply after alder foliage has reached full size. Do not make more than one cut surface application per year. Do not use more than 8.8 pints per 100 gallons of spray solution. Forest Site Preparation Budbreak Spray: For control of alder, susceptible broadleaf weeds, and susceptible woody plants before planting forest seedlings, apply up to 2 quarts of HM-1603 Herbicide per acre in a minimum of 10 gallons spray mixture per acre. Apply as an oil spray (see Mixing Instructions) after alder buds break, but before foliage is 1/4 full size. A water spray including 2 to 4 quarts per acre of diesel oil, fuel oil, stove oil, or crop oil concentrate may also be used. Conifer Release: Some Conifers are more susceptible to HM-1603 Herbicide than others. Prior to application, consult your local Forestry agency about use pattern and history of use. To control alder, susceptible broadleaf weeds, and susceptible woody plants in young conifer stands, apply up to 2 pints per acre in a minimum of 10 gallons spray mixture per acre. This spring foliage treatment should be applied as a water spray when 3/4 of the brush foliage has full size leaves and before new conifer growth reaches 2 inches in length. Such stages usually occur between early May and mid-June, but application timing should be based on growth stages of brush and conifers. Application may cause leader deformation and other conifer injury, but trees should overcome it during the next growing season. To control hazel brush in the Lake states, apply up to 2 pints of HM-1603 Herbicide per acre in a minimum of 10 gallons spray mixture per acre. Apply as a water spray when new shoot growth of hazel is complete (usually mid-July). After conifer species such as white pine, ponderosa pine, jack pine, red pine, black spruce, white spruce, red spruce, and balsam fir crease growth and harden off and brush is still actively growing in late summer, apply up to 3 pints of HM-1603 Herbicide per acre in a minimum of 10 gallons spray mixture per acre. Apply as a water spray to control certain competing hardwoods such as alder, aspen, birch, hazel and willow. However, if possible injury cannot be tolerated, do not use since this treatment may cause conifer injury. To control tanoak, madrone, ceanothus, canyon live oak, and manzanita, and to release Douglas fir, hemlock, Sitka spruce or grand fir, apply up to 3 pints of HM-1603 Herbicide per acre in a minimum of 10 gallons spray mixture per acre. This spring foliage treatment should be applied as a water spray including, if desired, up to 1 quart of diesel oil, fuel oil, stove oil, or crop oil concentrate per gallon of water (see Mixing Instructions). Make application before new growth on Douglas fir is 2 inches long. To release ponderosa pine from the same species, treat before new pine growth begins in the spring. Addition of oil or oil concentrate may cause unacceptable injury to pines. For dormant applications in late winter or early spring for control of susceptible woody species such as alder, willow, poplars, cherry, vine maple, ceanothus, tanoak, madrone, and manzanita, apply up to 3 pints of HM-1603 Herbicide per acre in a minimum of 10 gallons spray mixture per acre. This dormant treatment should be applied in diesel oil, fuel oil, stove oil, or other suitable diluent such as water plus crop oil concentrate (see Mixing Instructions). Do not use in plantations where pine and larch are among the desired crop species. _______________________________FOREST MANAGEMENT _______________________________ Do not apply under drip line of desirable trees or adjacent to desirable vegetation. Limited to one broadcast application per year.

Do not apply under drip line of desirable trees or adjacent to desirable vegetation. Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 23 Forest Roadsides: To control susceptible broadleaf weeds and woody plants on forest roadsides, apply 1 to 3 pints of HM-1603 Herbicide per acre in a minimum of 10 gallons spray mixture per acre. Apply as a water spray and, if desired, include up to 3 quarts per acre of diesel oil, fuel oil, stove oil, or crop oil concentrate (see Mixing Instructions). Apply when sufficient foliage is present for absorption. Non-Crop Area Restrictions: Postemergence (annual and perennial weeds): • Limited to 2 applications per year. • Minimum of 30 days between applications. Postemergence (woody plants) • Limited to one application per year. Do not apply more than 4 % pints of HM-1603 Herbicide /Acre for a single application. (Equivalent to 1.4 lbs. 2,4-D acid and 1.1 lbs. dicamba acid per acre). For control of many broadleaf weeds and small woody plants, apply 2/3 to 2 pints of HM-1603 Herbicide per acre. Use the high rate for woody plants. Applications may be as broadcast sprays, small area sprays or spot treatments. For small areas or spot spraying, use 2 fluid ounces of HM-1603 Herbicide per gallon of water and spray weeds to runoff. Regardless of the method of application, use adequate spray volume for full coverage of weeds. Preferred application timing is in the early spring when sufficient weeds have emerged, and when weeds are small and actively growing, but before weeds are too mature. Summer applications to older, drought-stressed weeds are less effective. However, weeds are more susceptible again in the fall when cooler, wetter conditions support active growth before a killing frost For fall treatment of mature weeds or perennial weed regrovrth, use up to 1.0 pints of HM-1603 Herbicide per acre. Several seasons of spring plus fall treatments may be necessary to control certain perennials. Use of oil sprays or the addition of spray adjuvants increases the risk of damage to desirable ground covers. ROADSIDES; MEDIANS; HIGHWAY, RAILROAD, UTILITY AND PIPELINE RIGHTS-OF-WAY, VACANT LOTS, AROUND UTILITY INSTALLATIONS, TRANSFORMERS, PUMP HOUSES, AND BUILDINGS, STORAGE AREAS, FENCES, GUARDRAILS, LUMBER YARDS, INDUSTRIAL SITES, AIRPORTS, TANK FARMS, FARMSTEADS, AND SIMILAR NONCROP AREAS Plant Response: Bent grass, other warm season or southern grasses, alfalfa, clover, or other legumes may be killed or injured. Do not apply when grass is in boot to milk stage, or after heading begins, if grass production is desired. Do not apply to newly seeded areas until grass is well established. Reseeding is not recommended for at least 30 days following application.

[Optional text for refillable plastic bulk containers] In Case of Spill: In case of large-scale spillage regarding this product, call ChemTrec 800-424-9300. Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 24 Refillable container (110 & 250 gallon & bulk); Refill this container with pesticide only. Do not reuse this container for any other purpose. Cleaning the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal, empty the remaining contents from the container into application equipment or mix tank. Fill the container about 10 percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing process two more times. (Non>refillable >5 gallons); Nonrefillable container. Do not reuse or refill this container. Offer for recycling if available. Triple rinse container (ore equivalent) promptly after emptying. PESTICIDE DISPOSAL; Pesticide wastes are toxic. Wastes resulting from this product must be disposed of on site or at an approved waste disposal facility. Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of Federal law and may contaminate groundwater. If these wastes cannot be disposed of by use according to label instructions, contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste representative at the nearest EPA Regional Office for guidance. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container % full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip back and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeat this procedure two more times. Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by other procedures approved by state and local authorities. Pressure rinse as follows (all sizes); Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later use for disposal. Insert pressure rinsing nozzle inside of the container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. (Non-reflllable <5 gallons); Triple rinse as follows; Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container >4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by other procedures approved by state and local authorities. CONTAINER HANDLING: Non-refillable container. Do not reuse or refill this container. Offer for recycling, if available. Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by other procedures approved by state and local authorities. PESTICIDE STORAGE: Do not store below temperature of 32T or above 100T. Store in original container in a well-ventilated area separately from fertilizer, feed, and foodstuffs. Keep container tightly closed when not in use. Reduce stacking height where local conditions can affect package strength. STORAGE AND DISPOSAL PROHIBITIONS; Do not contaminate water, food, or feed by storage or disposal. Do not store under conditions that might adversely affect the container or its ability to function properly.

Scientific Name Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 25 Steps to be taken in case material is released or spilled: Dike and contain the spili with inert material (sand, earth, etc) and transfer liquid and solid diking material to separate containers for disposal. Remove contaminated clothing, and wash affected skin areas with soap and water. Wash clothing before re-use. Keep the spill out of all sewers and open bodies of water. Weeds listed in this label: Common Name Sedge Shepherdspurse Smartweed, Pennsylvania Sneezeweed, Bitter Sunflower, Common (wild) Thistle, Russian Monarda punctata Gutierrezia dracuncutoides Polygonum convolvulus Solanum rostratum Arctium spp. Ranunculus arvensis Stellaria media Agrostemma githago Xanthium strumanum Coreopsis tinctoria Croton capitatus Proboscidea iouisianica Eupatorium capiHiMium Oenothera ladniata Linum catharticum Erigeron annuus Descurainia sophia Lamium amplexicaule Polygonum aviculare Kochia scoparia Chenopodium album Lactuca serriola Maalva neglecta Conyza canadensis Ipomoea hederacea Ipomoea pupurea Brassica spp. Descurainia pinnata Thlaspi arvense Lepidium virginicum Amaranthus biitoides Amaranthus retrofiexus Amaranthus hybndus Amaranthus albus Diodia teres Portuiaca oleracea Ambrosia artemisifoHa Ambrosia bidentata Ambrosia psHostachya Cyperus compressus Capseiia bursa-pastoris Polygonum pensylvanicum Helenium amarum Helianthus annuus Salsola iberica ANNUALS Beebalm, Spotted Broomweed, Common Buckwheat, Wild Buffalobur Burdock Buttercup, Corn Chickweed, Common Cockle, Com Cocklebur, Common Coreopsis, Plains Croton, Woolly Devilsclaw, Dogfennel (Cypressweed) Eveningprimrose, Cutleaf Flax Fleabane, Annual Hixweed Henbit Knotweed, Prostrate Kochia Lambsquarters, Common Lettuce, Prickly Mallow, Common Horseweed/Marestail Momigglory, Ivyleaf Tall Mustard, Annual Tansy Pennycress, Field Pepperweed, Virginia Pigweed, Prostrate, Red root. Smooth, Tumble Poorjoe Purslane, Common Ragweed, Common, Lance-leaf, Western

Scientific Name Look inside for complete Restrictions and Limitations and Application Instructions Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 26 Food/Feed Crop Uses This product can be used on the following: These crops are considered Food/Feed crops only when harvested, grazed, or foraged. Otherwise, they are considered non-Food/Feed uses. Vetch Yankeeweed Conservation Reserve Program Land Fallow Systems (Between Crop Application) General Farmstead Grass (Hay or Silage) Pastures Grass Grown for Seed Convolvulus arvensls Cardamlne spp. Aesculusspp. Cnidoscolus stimulosus Gchorium intybus Tn folium aureum Taraxacum officinale Rumex crispus Sambucus canadensis SoHdago missouriensis Isocoma coronopifoHa Senecio vulgaris Lonicera Solanum caroHniense Rhus radicans Centaurea nigra Centaurea repens Centaurea maculosa Iva annua Prosopis juHdora Asdepius Solanum elaeagnifolium Solanum nigrum Diospyros virginiana Qiry^odiamnus puldiellus Senecio jacobaea Brunnidiia ovata Artemisia frigida Polygonum cotxineum Rumex acetosella Sondius arvensis Euphorbia esula Centaurea solsb'tialis Sapium sebi^rum Cirsium vulgare Cirsium arven^ Canduus nutans Canduus acanthoides Vida spp. Eupatonum armpositifoHum __________Common Name BIENNALS AND PERENNIALS Bindweed, field Bittercress Buckeye Bullnettle Chicory Clover, Hop Dandelion Dock, Curly Elderberry Goldenrod, Missouri Goldenbush, Common Groundset Honeysuckle, Hairy Horsenettle Ivy, Poison Knapweed, Black Russian Spotted Marshelder Mesquite Milkweed, Antelopehom Nightshade, Silverleaf Black Persimmon, Eastern Rabbitbrush, Southwestern Ragwort, Tansy Redvine Sagebrush, Fringed Smartweed, Swamp Sorrel, Red (Sheep Sorrel) Sowthistle, Perennial Spurge, Leafy Starthistle, Yellow Tallow Tree, Chinese Thistle, Bull Canada Musk Plumeless • Rangeland • Sugarcane • Teff • Wheat

CONDITIONS OF SALE AND WARRANTY Filename: HM-1603 Herbicide (5905-AEL) 101620 CLN .doc 27 HELENA AGRI-ENTERPRISES, LLC warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes referred to in the Directions for Use subject to the inherent risks referred to above. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, HELENA AGRI ­ ENTERPRISES, LLC MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE OR OF MERCHANTABILITY OR ANY OTHER EXPRESS OR IMPLIED WARRANTY. THIS WARRANTY DOES NOT EXTEND TO, AND THE BUYER SHALL BE SOLELY RESPONSIBLE FOR, ANY AND ALL LOSS OR DAMAGE WHICH RESULTS FROM THE USE OF THIS PRODUCT IN ANY MANNER WHICH IS INCONSISTENT WITH THE LABEL DIRECTIONS. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BUYER'S EXCLUSIVE REMEDY AND MANUFACTURER'S OR SELLER'S EXCLUSIVE LIABILITY FOR ANY AND ALL CLAIMS, LOSSES, DAMAGES, OR INJURIES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, WHETHER OR NOT BASED IN CONTRACT, NEGLIGENCE, STRICT LIABILITY IN TORT OR OTHERWISE, SHALL BE LIMITED, AT THE MANUFACTURER'S OPTION, TO REPLACEMENT OF OR THE REPAYMENT OF THE PURCHASE PRICE FOR THE QUANTITY OF PRODUCT WITH RESPECT TO WHICH DAMAGES ARE CLAIMED. When Buyer suffers losses or damages resulting from the use or handling of this product (including claims based on contract, negligence, strict liability, or other legal theories). Buyer must promptly notify Seller in writing of any claims to be eligible to receive either remedy stated above. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, IN NO CASE SHALL HELENA AGRI-ENTERPRISES, LLC OR THE SELLER BE LIABLE FOR CONSEQUENTIAL, SPECIAL OR INDIRECT DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT. HELENA AGRI-ENTERPRISES, LLC and the Seller offer this product, and the Buyer accepts it, subject to the foregoing Conditions of Sale and Warranty, which may be varied only by agreement in writing signed by a duly authorized representative of HELENA AGRI-ENTERPRISES, LLC. No employee or agent of HELENA AGRI-ENTERPRISES, LLC or the Seller is authorized to vary or exceed the terms of this Warranty in any other manner. The DIRECTIONS FOR USE of this product reflect the opinion of experts based on field use and tests. The directions are believed to be reliable and must be followed carefully. Crop injury, ineffectiveness, or other unintended consequences may result because of such factors as weather conditions or presence of other materials. To the extent consistent with applicable law, all such risks shall be assumed by the Buyer.