crop-chem-docs/corpus/epa_ppls/7969-140.md

SAN845H HERBICIDE

• EPA Reg No: 7969-140
• Registrant: BASF AGRICULTURAL SOLUTIONS US, LLC
• Signal word: Warning
• Active ingredients: Dicamba, sodium salt (83.6%)
• Label accepted: 2015-09-18
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/007969-00140-20150918.pdf

---

UNITED STATES ENVIRONMENTAL PROTECTION AGENCY WASHINGTON, DC 20460

Fast Track Label Acceptable v.20150320 OFFICE OF CHEMICAL SAFETY AND POLLUTION PREVENTION September 18, 2015

Mr. Jeffrey H. Birk BASF 26 Davis Drive Research Triangle Park, NC 27709

Subject: Label Amendment – Add additional container handling instructions for returnable/refillable containers. Product Name: SAN 845H herbicide EPA Registration Number: 7969-140 Application Date: January 20, 2015 Decision Number: 499751

Dear Mr. Birk:

The amended label referred to above, submitted in connection with registration under the Federal Insecticide, Fungicide and Rodenticide Act, as amended, is acceptable. This approval does not affect any conditions that were previously imposed on this registration. You continue to be subject to existing conditions on your registration and any deadlines connected with them.

A stamped copy of your labeling is enclosed for your records. This labeling supersedes all previously accepted labeling. You must submit one copy of the final printed labeling before you release the product for shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may distribute or sell this product under the previously approved labeling for 18 months from the date of this letter. After 18 months, you may only distribute or sell this product if it bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3.

Should you wish to add/retain a reference to the company’s website on your label, then please be aware that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims made on the website may not substantially differ from those claims approved through the registration process. Therefore, should the Agency find or if it is brought to our attention that a website contains false or misleading statements or claims substantially differing from the EPA approved registration, the website will be referred to the EPA’s Office of Enforcement and Compliance.

Page 2 of 2 EPA Reg. No. 7969-140 Decision No. 499751

Your release for shipment of the product constitutes acceptance of these conditions. If these conditions are not complied with, the registration will be subject to cancellation in accordance with FIFRA section 6. If you have any questions, please contact Karen Samek by phone at (703) 347-8825, or via email at samek.karen@epa.gov.

Sincerely,

Kathryn Montague, Product Manager 23 Herbicide Branch Registration Division (7505P) Office of Pesticide Programs

Enclosure

SAN 845H herbicide For weed control in asparagus, conservation reserve programs, corn, cotton, fallow croplands, farmstead (noncropland), sorghum, grass grown for seed, hay, proso millet, pasture, rangeland, small grains (barley, oat, triticale, wheat), soybean, sugarcane, and turf Active Ingredient: Sodium salt of dicamba: (3,6-dichloro-2-Methoxybenzoic acid)* . . . . . . . . . . . . . 83.6% Other Ingredients: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.4% Total: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100.0%

• This product contains 70.0% 3,6-dichloro-2-Methoxybenzoic acid (dicamba). EPA Reg. No. 7969-140E P A Est. No. KEEP OUT OF REACH OF CHILDREN WARNING/AVISO See inside for complete First Aid, Precautionary Statements, Directions For Use, Conditions of Sale and Warranty, and state-specific crop and/or use site restrictions. In case of an emergency endangering life or property involving this product, call day or night, 1-800-832-HELP (4357). Net Contents: BASF Corporation 26 Davis Drive, Research Triangle Park, NC 27709 Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand the label, find someone to explain it to you in detail.) Group 4 Herbicide 09/18/2015 7969-140

2 Precautionary Statements Hazards to Humans and Domestic Animals WARNING. Causes substantial but temporary eye injury. DO NOT get in eyes or on clothing. Harmful if swallowed or absorbed through skin. Avoid contact with skin. Personal Protective Equipment (PPE) All mixers, loaders, and applicators and other handlers must wear: • Long-sleeved shirt and long pants • Chemical resistant gloves (except for pilots) such as barrier laminate, polyethylene, butyl rubber ≥ 14 mils, nitrile rubber ≥ 14 mils, neoprene rubber ≥ 14 mils, natural rubber ≥ 14 mils, polyvinyl chloride (PVC) ≥ 14 mils, and viton ≥ 14 mils. • Shoes plus socks • Protective eyewear See engineering controls for additional requirements and exceptions. Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product’s concentrate. DO NOT reuse them. Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry. Engineering Controls Statement When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS. Pilots must use cockpits in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-6)]. Environmental Hazards Keep out of lakes, streams, or ponds. For terrestrial uses, DO NOT apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark. DO NOT contaminate water when disposing of equipment washwater or rinsate. Apply this product only as directed on the label. This chemical is known to leach through soil into ground- water under certain conditions as a result of agricultural use. Use of this chemical in areas where soils are perme- able, particularly where the water table is shallow, may result in groundwater contamination. DO NOT discharge effluent containing this product into lakes, streams, ponds, estuaries, oceans, or other waters unless accordance with the requirements of a National Pollution Discharge Elimination System (NPDES) permit and the permitting authority has been notified in writing prior to discharge. DO NOT discharge effluent containing this product to sewer systems without previously notifying the local sewage treatment plant authority. For guidance contact your State Water Board or Regional Office of the EPA. Groundwater and Surface Water Protection Point source contamination. To prevent point source contamination, DO NOT mix, load this pesticide product within 50 feet of wells (including abandoned wells and USER SAFETY RECOMMENDATIONS Users should: • Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. • Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. • Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing. FIRST AID If in eyes • Hold eye open and rinse slowly and gently with water for 15 to 20 minutes. • Remove contact lenses, if present, after first 5 minutes; then continue rinsing eyes. • Call a poison control center or doctor for treatment advice. If on skin or clothing • Take off contaminated clothing. • Rinse skin immediately with plenty of water for 15 to 20 minutes. • Call a poison control center or doctor for treatment advice. If swallowed • Call a poison control center or doctor immediately for treatment advice. • Have person sip a glass of water if able to swallow. • DO NOT induce vomiting unless told to do so by a poison control center or doctor. • DO NOT give anything by mouth to an unconscious person. HOTLINE NUMBER Have the product container or label with you when calling a poison control center or doctor or going for treatment. You may also contact BASF Corporation for emergency medical treatment information: 1-800-832-HELP (4357).

3 drainage wells), sinkholes, perennial or intermittent streams and rivers, and natural or impounded lakes and reservoirs. DO NOT apply pesticide product within 50 feet of wells. This setback does not apply to properly capped or plugged abandoned wells and does not apply to impervi- ous pad or properly diked mixing/loading areas as described below. Mixing, loading, rinsing, or washing oper- ations performed within 50 feet of a well are allowed only when conducted on an impervious pad constructed to withstand the weight of the heaviest load that may be on or move across the pad. The pad must be self- contained to prevent surface water flow over or from the pad. The pad capacity must be maintained at 110% that of the largest pesticide container or application equipment used on the pad and have sufficient capacity to contain all product spills, equipment or container leaks, equipment washwater, and rainwater that may fall on the pad. The containment capacity does not apply to vehicles delivering pesticide shipments to the mixing/loading site. States may have in effect additional requirements regarding wellhead setbacks and operational containment. Care must be taken when using this product to prevent: a) back-siphoning into wells, b) spills or c) improper disposal of excess pesticide, spray mixtures or rinsates. Check valves or antisiphoning devices must be used on all mixing equipment. Movement by surface runoff or through soil: DO NOT apply under conditions which favor runoff. DO NOT apply to impervious substrates such as paved or highly compacted surfaces in areas with high potential for groundwater contamination. Groundwater contamination may occur in areas where soils are permeable or coarse and groundwater is near the surface. DO NOT apply to soils classified as sand with less than 3% organic matter and where groundwater depth is shallow. To minimize the possibility of groundwater contamination, carefully follow application rates as affected by soil type in the Crop- specific Information section of this label. Movement by water erosion of treated soil: DO NOT apply or incorporate this product through any type of irri- gation equipment nor by flood or furrow irrigation. Ensure treated areas have received at least one-half inch rainfall (or irrigation) before using tailwater for subsequent irriga- tion of other fields. Endangered Species Concerns The use of any pesticide in a manner that may kill or otherwise harm an endangered species or adversely modify their habitat is a violation of federal law. Directions For Use It is a violation of federal law to use this product in a manner inconsistent with its labeling. DO NOT apply this product in a way that will contact work- ers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your state or tribe, consult the agency responsible for pesticide regulation. DO NOT apply this product through any type of irrigation system Before applying SAN 845H herbicide, read all directions and precautions appearing on the container label and in this booklet. Failure to follow all directions and precautions may result in unsatisfactory weed control, crop injury, or illegal residues. NONAGRICULTURAL USE REQUIREMENTS The requirements in this box apply to uses of this prod- uct that are NOT within the scope of the Worker Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce agricultural plants on farms, forests, nurseries, or greenhouses. DO NOT enter or allow others to enter until sprays have dried. AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. This standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equip- ment (PPE) and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. DO NOT enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 24 hours. EXCEPTION: If the product is soil injected or soil incor- porated, the Worker Protection Standard, under certain circumstances, allows workers to enter the treated area if there will be no contact with anything that has been treated. PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water is: • Coveralls worn over short-sleeve shirt and short pants • Chemical-resistant footwear plus socks • Chemical-resistant gloves made of any waterproof material • Chemical-resistant headgear for overhead exposure • Protective eyewear

4 (continued) (continued) STORAGE AND DISPOSAL DO NOT contaminate water, food, or feed by storage or disposal. Pesticide Storage Store in original containers only. Keep container closed when not in use. DO NOT store near food or feed. In case of spill on floor or paved surfaces, mop and remove to chemical waste storage area until proper disposal can be made if product cannot be used according to label. Pesticide Disposal Wastes resulting from using this product may be disposed of on-site or at an approved waste disposal facility. If these wastes cannot be disposed of according to label instructions, contact your state pesticide agency or environmental control agency, or the Hazardous Waste representatives at the nearest EPA Regional Office for guidance. Container Handling Supersack Nonrefillable Container. DO NOT reuse or refill this container. Completely empty bag into application equip- ment; then dispose of empty bag in a sanitary landfill, or by incineration, or by other procedures approved by state and local authorities. Drum Liner Nonrefillable Container. DO NOT reuse or refill this container. Completely empty removable liner by shaking and tapping sides and bottom to loosen clinging parti- cles. Empty residue into application equipment; then dispose of empty liner in a sanitary landfill, or by incinera- tion, or by other procedures approved by state and local authorities. Drum Nonrefillable Container. DO NOT reuse or refill this container. Triple rinse or pressure rinse container (or equivalent) promptly after emptying; then offer for recy- cling, if available, or reconditioning, if appropriate, or puncture and dispose of in a sanitary landfill, or by incin- eration, or by other procedures approved by state and local authorities. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container 1/4 full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into appli- cation equipment or a mix tank, or store rinsate for later use or disposal. Repeat this procedure two more times. Dispose of rinsate in compliance with state and local regulations for pesticide products. STORAGE AND DISPOSAL (continued) Container Handling (continued) Drum (continued) Pressure rinse as follows: Empty the remaining contents into application equipment or mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equip- ment or mix tank, or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. Drum with Liner Refillable Container. Refill with SAN 845H herbicide containing dicamba only. DO NOT reuse for any other purpose. Cleaning before refilling is the responsibility of the refiller. Completely empty liner by shaking and tapping sides and bottom to loosen clinging particles. Empty residue into application or manufacturing equipment. Fiber Drum and/or Liner Disposal: DO NOT reuse for any other purpose than refilling (see preceding). Cleaning the container (liner and/or fiber drum) before final disposal is the responsibility of the person disposing of the container. Offer the liner for recycling, if available, or dispose of liner in a sanitary landfill, or by incineration. DO NOT burn, unless allowed by state and local ordi- nances. If drum is contaminated and cannot be reused, dispose of it in the manner required for its liner. Plastic or Metal Containers Refillable container. Refill with SAN 845H containing dicamba only. DO NOT reuse for any other purpose. Cleaning before refilling is the responsibility of the refiller. Prior to refilling, inspect carefully for damage such as cracks, punctures, abrasions, worn out threads, and closure devices. If damage is found, DO NOT use the container; contact BASF for instructions at the number following. Check for leaks after refilling and before trans- porting. If leaks are found, DO NOT reuse or transport container; contact BASF for instructions at the number following.

5 In Case of Spill In case of large-scale spill of this product, call: • CHEMTREC 1-800-424-9300 • BASF Corporation 1-800-832-HELP (4357) STORAGE AND DISPOSAL (continued) Container Handling (continued) Plastic or Metal Containers (continued) Container Disposal: DO NOT reuse this container for any purpose other than refilling (see preceding). Cleaning the container before final disposal is the responsibility of the person disposing of the container. To clean the container before final disposal, use the following pressure rinsing procedure: Insert a lance fitted with a suitable tank cleaning nozzle into the container and ensure that the water spray thoroughly covers the top, bottom, and all sides inside the container. The nozzle manufacturer generally provides instructions for the appropriate spray pressure, spray duration, and/or spray volume. If the manufacturer’s instructions are not available, pressure rinse the container for at least 60 seconds using a mini- mum pressure of 30 PSI with a minimum rinse volume of 10% of the container volume. Drain, pour, or pump rinsate into application equipment or rinsate collection system. Repeat this pressure rinsing procedure two more times; then for: Plastic Container - Offer for recycling, if available, or puncture and dispose of in a sanitary landfill, or by incin- eration. DO NOT burn, unless allowed by state and local ordinances. Metal Container - Offer for recycling, if available, or reconditioning, if appropriate, or puncture and dispose of in a sanitary landfill, or by other procedures approved by state and local authorities.

6 Product Information SAN 845H herbicide is formulated as a water-dispersible granule intended for use in a spray to control and suppress many annual, biennial, and perennial broadleaf weeds, as well as woody brush and vines listed in Table 1. SAN 845H may be used for control of these weeds in asparagus, corn, cotton, conservation reserve programs, fallow cropland, grass grown for seed, hay, proso millet, pasture, rangeland, farmstead (noncropland), small grains (barley, oat, triticale, wheat), sorghum, soybeans, sugarcane, and turf. Mode of Action SAN 845H is readily absorbed by plants through shoot and root uptake, translocates throughout the plant’s system, and accumulates in areas of active growth. SAN 845H interferes with the plant’s growth hormones (auxins) resulting in death of many broadleaf weeds. Resistance Management Although SAN 845H has a low probability of selecting for resistant weed biotypes, tank mixes and rotation with herbicides possessing other modes of action are recom- mended to avoid weed resistance. The following directions apply to all uses of SAN 845H. Additional precautions and restrictions will be found in each specific use section. DO NOT treat irrigation ditches or water used for crop irrigation or domestic uses. DO NOT apply this product through any type of irrigation system. MIXING AND APPLICATION UNLESS OTHERWISE SPECIFIED UNDER THE INDIVIDUAL USE HEADINGS OF THIS LABEL, THE FOLLOWING DIRECTIONS APPLY TO ALL CROP AND NONCROP USES OF SAN 845H. REFER TO INDIVIDUAL USE SECTIONS FOR ADDITIONAL PRECAUTIONS, RESTRICTIONS, APPLICATION RATES AND TIMINGS. SAN 845H is a water-dispersible formulation that can be applied using water or sprayable fluid fertilizer as the carrier. If a fluid fertilizer is to be used, a compati bility test (see Compatibility Test for Mix Components) should be made prior to tank mixing. Ground or aerial application equipment which will give good spray coverage of weed foliage should be used. HOWEVER, DO NOT USE AERIAL APPLICATION EQUIPMENT IF SPRAY PARTICLES CAN BE CARRIED BY WIND INTO AREAS WHERE SENSITIVE CROPS OR PLANTS ARE GROWING. Apply 3 to 50 gallons of diluted spray per treated acre when using ground application equipment, or 2 to 10 gallons of diluted spray per treated acre when using aerial application equipment. Use the higher level of the listed spray volumes when treating dense or tall vegetation. Use coarse sprays. Select nozzles designed to produce minimal amounts of fine spray particles. Spray with nozzles as close to the weeds as is practical for good weed coverage. SAN 845H must not be applied during periods of gusty wind or when wind is in excess of 15 mph as uneven spray coverage may occur. Avoid disturbing (e.g. cultivating or mowing) treated areas for at least 7 days following application. Cleaning Spray Equipment Clean application equipment thoroughly by using a strong detergent or commercial sprayer cleaner, according to the manufacturer’s directions, and then triple rinsing the equip- ment before and after applying this product. PROCEDURE FOR CLEANING SPRAY EQUIPMENT The steps listed below are suggested for thorough clean- ing of spray equipment following applications of SAN 845H or tank mixes of SAN 845H.

1. Hose down thoroughly the inside as well as outside surfaces of equipment while filling the spray tank half full of water. Flush by operating sprayer until the system is purged of the rinse water.
2. Fill tank with water while adding 1 quart of household ammonia for every 25 gallons of water. Operate the pump to circulate the ammonia solution through the sprayer system for 15 to 20 minutes and discharge a small amount of the ammonia solution through the boom and nozzles. Let the solution stand for several hours, preferably overnight.
3. Flush the solution out of the spray tank through the boom.
4. Remove the nozzles and screens and flush the system with two full tanks of water. The steps listed below are suggested for thorough cleaning of spray equipment used to apply SAN 845H as a tank mix with wettable powders (WP), emulsifiable concentrates (EC), or other types of water-dispersible formulations. SAN 845H tank mixes with water- dispersible formulations require the use of a water/detergent rinse.
5. Complete step 1.
6. Fill tank with water while adding 2 lbs of detergent for every 40 gallons of water. Operate the pump to circulate the detergent solution through the sprayer system for 5 to 10 minutes and discharge a small amount of the solution through the boom and nozzles. Let the solution stand for several hours, preferably overnight.
7. Flush the detergent solution out of the spray tank through the boom.
8. Repeat step 1 and follow with steps 2, 3, and 4.

7 Table 1. Weed List for Species Controlled or Suppressed by SAN 845H herbicide, including ALS-resistant and Triazine-resistant Biotypes, when used according to label directions ANNUALS Alkanet Amaranth, Palmer, Powell, spiny Aster, slender Bedstraw, catchweed Beggarweed, Florida Broomweed, common Buckwheat, tartary, wild Buffalobur Burclover, California Burcucumber Buttercup, corn, creeping, roughseed, Western field Carpetweed Catchfly, nightflowering Chamomile, corn Chervil, Bur Chickweed, common Clovers Cockle, corn, cow, white Cocklebur, common Copperleaf, hophombeam Cornflower (Bachelor button) Croton, tropic, woolly Daisy, English Dragonhead, American Eveningprimrose, cutleaf Falseflax, smallseed Fleabane, annual Flixweed Fumitory Goosefoot, nettleleaf Hempnettle Henbit Jacob’s Ladder Jimsonweed Knawel (German Moss) Knotweed, prostrate Kochia Ladysthumb Lambsquarters, common Lettuce, miner’s, prickly Mallow, common, Venice Marestail (horseweed) Mayweed Morningglory, ivyleaf, tall Mustard, black, blue, tansy, treacle, tumble, wild, yellowtops Nightshade, black, cutleaf Pennycress, field (fanweed, Frenchweed, stinkweed) Pepperweed, Virginia (pepper- grass) Pigweed, prostrate, redroot (carelessweed), rough, smooth, tumble Pineappleweed Poorjoe Poppy, red-horned Puncturevine Purslane, common Pusley, Florida Radish, wild Ragweed, common, giant (buffaloweed), lance-leaf Rocket, London, yellow Rubberweed, bitter (bitterweed) Salsify Senna, coffee Sesbania, hemp Shepherd’s purse Sicklepod Sida, prickly (teaweed) Smartweed, green, Pennsylvania Sneezeweed, bitter Sowthistle, annual, spiny Spanish needles Spikeweed, common Spurge, prostrate, leafy Spurry, corn Starbur, bristly Starwort, little Sumpweed, rough Sunflower, common (wild), volunteer Thistle, Russian Velvetleaf Waterhemp Waterprimrose, winged Wormwood BIENNIALS Burdock, common Carrot, wild (Queen Anne’s lace) Cockle, white Eveningprimrose, common Geranium, Carolina Gromwell Knapweed, diffuse, spotted Mallow, dwarf Plantain, bracted Ragwort, tansy Starthistle, yellow Sweetclover Teasel Thistle, bull, milk, musk, plume- less PERENNIALS Alfalfa1 Artichoke, Jerusalem Aster, spiny, whiteheath Bedstraw, smooth Bindweed, field, hedge Bluewood, Texas Bursage, woollyleaf 1 (Bur, ragweed, povertyweed) Buttercup, tall Campion, bladder Chickweed, field, mouseear Chicory 1 Clover1, hop Dandelion1 Dock, broadleaf (bitterdock), curly Dogbane, hemp Dogfennel 1 (Cypressweed) Fern, bracken Garlic, wild Goldenrod, Canada, Missouri Goldenweed, common Hawkweed Henbane, black 1 Horsenettle, Carolina Ironweed Knapweed, black, diffuse, Russian 1, spotted Milkweed, common, honeyvine, Western whorled Nettle, stinging Nightshade, silverleaf (White horsenettle) Onion, wild Plantain, broadleaf, buckhorn Pokeweed Ragweed, Western Redvine Sericia, lespedeza Smartweed, swamp Snakeweed, broom Sorrel 1, red (sheep sorrel) Sowthistle1, perennial Spurge, leafy Sundrop Thistle, Canada, Scotch Toadflex, dalmatian Tropical soda apple Trumpetcreeper (buckvine) Vetch Waterhemlock, spotted Waterprimrose, creeping Woodsorrel 1, creeping, yellow Wormwood, Louisiana Yankeeweed Yarrow, common 1 WOODY SPECIES Alder Ash Aspen Basswood Beech Birch Blackberry 2 Blackgum2 Cedar2 Cherry Chinquapin Cottonwood Creosotebush 2 Cucumbertree Dewberry 2 Dogwood2 Elm Grape Hawthorn (Thornapple) 2 Hemlock Hickory Honeylocust Honeysuckle Hornbeam Huckleberry Huisache Ivy, Poison Kudzu Locust, black Maple Mesquite Oak Oak, poison Olive, Russian Persimmon, Eastern Pine Plum, sand (Wild plum) 2 Poplar Rabbitbrush Redcedar, Eastern Rose 2, McCartney, multiflora Sagebrush, fringed2 Sassafras Serviceberry Spicebush Spruce Sumac Sweetgum 2 Sycamore Tarbush Willow Witchhazel Yaupon 2 Yucca2 1 Noted perennials may be controlled using SAN 845H at rates lower than those specified for other listed per ennial weeds; see Rates and Timings for specific use. 2 Growth supression only

8 Application Instructions SAN 845H herbicide can be applied to actively growing weeds as aerial, broadcast, band, or spot spray applica- tions using water or sprayable fertilizer as a carrier. For SAN 845H application rates for control or suppression by weed type and growth stage see Table 2. For crop- specific application timing and other details, refer to Crop- specific Information. To avoid uneven spray coverage, SAN 845H must not be applied during periods of gusty wind or when wind is in excess of 15 mph. Avoid off-target movement. Use extreme care when applying SAN 845H to prevent injury to desirable plants and shrubs. DO NOT treat areas where either possible downward movement into the soil or surface washing may cause contact of SAN 845H with the roots of desirable plants such as trees and shrubs. To avoid injury to desirable plants, equipment used to apply SAN 845H should be thoroughly cleaned (see procedure in Cleaning Spray Equipment) before reusing to apply any other chemicals. All crop uses of SAN 845H are intended for a normal growing interval between planting and harvest. No crop rotation restrictions exist if normal harvest of treated crop has occurred. If this interval is shortened, such as in cover crops that will be plowed under, DO NOT follow up with the planting of a sensitive crop. Crops growing under stress conditions such as drought, poor fertility, or foliar damage due to hail, wind or insects, can exhibit various injury symptoms that may be more pronounced if herbicides are applied. Consult your local or state authorities for possible applica- tion restrictions and advice concerning these and other special local use situations. Tank mix directions are for use only in states where the tank mix product and application site are registered. Cultivation DO NOT cultivate within 7 days after applying SAN 845H. Sensitive Crop Precautions SAN 845H may cause injury to desirable trees and plants, particularly beans, cotton, flowers, fruit trees, grapes, ornamentals, peas, potatoes, soybeans, sunflowers, tobacco, tomatoes, and other broadleaf plants when contacting their roots, stems, or foliage. These plants are most sensitive to SAN 845H during their development or growing stage. Directions to avoid herbicide drift: • Avoid making applications when spray particles may be carried by air currents to areas where sensitive crops and plants are growing. DO NOT spray near sensitive plants if wind is gusty or in excess of 5 mph and moving in the direction of adjacent sensitive crops. Leave an adequate buffer zone between area to be treated and sensitive plants. Coarse sprays are less likely to drift out of the target area than fine sprays. • Use coarse sprays (volume median diameter of 400 microns or more) to avoid potential herbicide drift. Select nozzles that are designed to produce minimal amounts of fine spray particles (less than 200 microns). Examples of nozzles designed to produce coarse sprays via ground applications are Delavan ® Raindrop, Spraying Systems XR (excluding 110º tips) flat fan, Turbo TeeJet®, Turbo FloodJet®, or large capacity flood nozzles such as D10, TK10, or greater capacity tips. • Keep the spray pressure at or below 20 psi and the spray volume at or above 20 gallons per acre (for ground broadcast applications), unless otherwise required by the manufacturer of drift-reducing nozzles. Consult your spray nozzle supplier concerning the choice of drift- reducing nozzles. • DO NOT apply SAN 845H adjacent to sensitive crops when the temperature on the day of application is expected to exceed 85° F as drift is more likely to occur. • Agriculturally approved drift-reducing additives may be used. Aerial Application Methods and Equipment Water Volume. Use 1 to 10 gallons of water per acre (2 to 20 gallons of diluted spray per treated acre for preharvest uses). Use the higher spray volume when treat- ing dense or tall vegetation. Application Equipment. Select nozzles designed to produce minimal amounts of fine spray particles. Make aerial applications at the lowest safe height to reduce exposing the spray to evaporation and wind. The applica- tor must follow the most restrictive use cautions to avoid drift hazards, including those found in this labeling, as well as state and local regulations and ordinances. DO NOT use aerial equipment if spray particles can be carried by the wind into areas where sensitive crops or plants are growing or when temperature inversions exist. Ground Application (Banding) When applying SAN 845H by banding, determine the amount of herbicide and water volume needed using the following formula: Band width in inches x Broadcast RATE per treated acre = Band RATE per treated acreRow width in inches Band width in inches x Broadcast VOLUME per treated acre = Band VOLUME per treated acreRow width in inches

9 Ground Application (Broadcast) Water Volume. Use 3 to 50 gallons of spray solution per broadcast acre for optimal performance. Use the higher spray volume when treating dense or tall vegetation. Application Equipment. Select nozzles designed to produce minimal amounts of fine spray particles. Spray with nozzles as close to the weeds as is practical for good weed coverage. Ground Application (Wipers) SAN 845H herbicide may be applied through wiper application equipment to control or suppress actively growing broadleaf weeds, brush, and vines. Use a solution containing 90 ounces SAN 845H per 1 gallon water. DO NOT contact desirable vegetation with herbicide solution. Wiper application may be made to crops (including pastures) and noncropland areas described in this label with the exception of cotton, sorghum, and soybean. Table 2. SAN 845H Application Rates for Control or Suppression by Weed Type and Growth Stage Use rate limitations are given in Restrictions and Limitations and Crop-specific Information sections. Additives To improve postemergence weed control, agriculturally approved surfactants, sprayable fertilizers (urea ammonium nitrate or ammonium sulfate), or crop oil concentrate may be added, particularly in dry growing conditions (refer to Table 3. Additive Rate Per Acre). Nitrogen Source • Urea ammonium nitrate (UAN): Use 2 to 4 quarts of UAN (commonly referred to as 28%, 30%, or 32% nitrogen solution) per acre. DO NOT use brass or aluminum nozzles when spraying UAN. • Ammonium sulfate (AMS): AMS at 2.5 pounds per acre may be substituted for UAN. Use high-quality AMS (spray grade) to avoid plugging of nozzles. Other sources of nitrogen are not as effective as those mentioned. BASF does not recommend applying AMS, if applied in less than 10 gallons per acre because of potential problems with precipitation in reduced volumes. Use AMS only if it has been demonstrated to be successful in local experience. Nonionic Surfactant The standard label recommendation is 1 pint of an 80% active nonionic spray surfactant per 100 gallons of water. For certain weeds, a higher spray surfactant rate is recommended. Weed Type and Stage Rate Per Acre (ounces) Weed Type and Stage Rate Per Acre (ounces) Annual1 Small, actively growing Established weed growth 6 to 12 12 to 17 Perennial Top growth suppression Top growth control and root suppression Noted perennials (footnote 1 in Table 1) Other perennials 3 6 to 12 12 to 24 24 24 Biennial Rosette diameter 1” to 3" Rosette diameter 3" or more Bolting 6 to 12 12 to 24 24 Woody Brush & Vines4 Top growth suppression Top growth control 2,3 Stems and stem suppression3 11.5 to 24 24 24 1 Rates below 6 ounces per acre may provide control or suppression but should typically be applied with other herbicides that are effective on the same species and biotype. 2 Species noted with footnote 2 in Table 2 will require tank mixes for adequate control. 3 DO NOT broadcast apply more than 24 ounces per acre per application. Use the higher level of listed rate ranges when treating dense vegetative growth or perennial weeds with well established root growth. 4 Retreatment or tank mixtures may be necessary for best control. However, DO NOT exceed a total of 48 ounces of SAN 845H per acre per year.

10 Oil Concentrate A crop oil concentrate must contain either a petroleum or vegetable oil base and must meet all of the following criteria: • be nonphytotoxic, • contain only EPA-exempt ingredients, • provide good mixing quality in the jar test, and • be successful in local experience. The exact composition of suitable products will vary; however, vegetable and petroleum oil concentrates should contain emulsifiers to provide good mixing quality. Highly refined vegetable oils have proven more satisfactory than unrefined vegetable oils. For additional information, see Compatibility Test for Mix Components. Adjuvants containing crop oil concentrates may be used in preplant, preemergence, and preharvest application, as well as in pastures and noncropland. DO NOT use crop oil concentrate for postemergence in-crop applications unless specifically allowed in Crop-specific Information section of this label. Table 3. Additive Rate Per Acre Compatibility Test for Mix Components Before mixing components, always perform a compatibility jar test. For 20 gallons per acre spray volume, use 3.3 cups (800 ml) of water. For other spray volumes, adjust accordingly. Only use water from the intended source at the source temperature. Add components in the sequence indicated in the Mixing Order using 2 teaspoons for each pound or 1 teaspoon for each pint of label rate per acre. Always cap the jar and invert 10 cycles between compo- nent additions. When the components have all been added to the jar, let the solution stand for 15 minutes. Evaluate the solution for uniformity and stability. The spray solution should not have free oil on the surface, nor fine particles that precipitate to the bottom, nor thick (clabbered) texture. If the spray solu- tion is not compatible, repeat the compatibility test with the addition of a suitable compatibility agent. If the solution is then compatible, use the compatibility agent as directed on its label. If the solution is still incompatible, DO NOT mix the ingredients in the same tank. Mixing Order

1. Water. Begin by agitating a thoroughly clean sprayer tank three-quarters full of clean water.
2. Agitation. Maintain constant agitation throughout mixing and application.
3. Inductor. If an inductor is used, rinse it thoroughly after each component has been added.
4. Products in PVA bags. Place any product contained in water-soluble PVA bags into the mixing tank. Wait until all water-soluble PVA bags have fully dissolved and the product is evenly mixed in the spray tank before continuing.
5. Water-dispersible products (dry flowables, wettable powders, suspension concentrates, or suspo- emulsions)
6. Water-soluble products (such as SAN 845H herbicide)
7. Emulsifiable concentrates (such as oil concentrate when applicable).
8. Water-soluble additives (such as AMS or UAN when applicable).
9. Remaining quantity of water. Maintain constant agitation during application. TANK MIXING INFORMATION Tank Mix Partners/Components The herbicide products listed may be applied with SAN 845H according to the specific tank mixing instruc- tions in this label and respective product labels. SAN 845H may also be tank mixed with other suitable registered herbicides. See section Crop-specific Information for more details. Read and follow the applicable Restrictions and Limitations and Directions For Use on all products involved in tank mixing. It is the pesticide user’s responsi- bility to ensure that all products in the listed mixtures are registered for the intended use. Users must follow the most restrictive directions and precautionary language of the products in the mixture (for example, First Aid from one product, spray drift management from another). SAN 845H may also be used in tank mixtures with foliar- applied insecticides including synthetic pyrethroids such as Ambush ®, Asana®, Pounce® and Warrior® or with the carbamate insecticide Furadan®. DO NOT apply SAN 845H in tank mixtures with Lorsban® insecticide. Physical incompatibility, reduced weed control, or crop injury may result from mixing SAN 845H with other pesti- cides (fungicides, herbicides, insecticides, or miticides), additives, or fertilizers. BASF does not recommend using tank mixes other than those specifically listed on BASF labeling. Local agricultural authorities may be a source of information when using other than BASF recommended tank mixes. Additive Rate Per Acre Nonionic Surfactant 1 to 2 pints per 100 gallons AMS UAN Solution Crop Oil Concentrate 2.5 pounds 2 to 4 quarts 1 quart* *See manufacturer’s label for specific rate recommendations.

11 Restrictions and Limitations • Maximum seasonal use rate: Refer to Table 4. • DO NOT exceed 48 ounces of SAN 845H herbicide (2 lbs acid equivalent) per acre, per year. • Preharvest Interval (PHI): Refer to Crop-specific Information for preharvest intervals. • Restricted-Entry Interval (REI): 24 hours Crop Rotational Restrictions The interval between application and planting rotational crop is given below. Always exclude counting days when the ground is frozen. Planting at intervals less than speci- fied below may result in crop injury. Moisture is essential for the degradation of this herbicide in soil. If dry weather prevails, use cultivation to allow herbicide contact with moist soil.

• Planting/replanting restrictions for SAN 845H appli- cations of 17 ounces per acre or less. No rotational cropping restrictions apply at 120 days or more following application. Additionally, for annual crop uses in this label including corn, cotton, sorghum, and soybean, follow the preplant use directions in Crop-specific Information. For barley, oat, wheat, and other grass seedings, the interval between application and planting is 15 days per 6 ounces per acre applied east of the Mississippi River and 22 days per 6 ounces per acre west of the Mississippi River.
• Planting/replanting restrictions for applications of more than 17 ounces and up to 48 ounces of SAN 845H per acre. Corn, sorghum, cotton (east of the Rocky Mountains) and all other crops grown in areas with 30" or more of annual rainfall may be planted 120 days or more after application. Barley, oat, wheat, and other grass seedings, may be planted if the interval from application to planting is 30 days per 12 ounces per acre east of the Mississippi River and 45 days per 12 ounces per acre west of the Mississippi River. For all other crops in areas with less than 30" of annual rainfall, the interval between application and planting is 180 days or more. • Rainfast peri od. Rainfall or irrigation occurring within 4 hours after postemergence applications may reduce the effectiveness of SAN 845H. • Stress. DO NOT apply to crops under stress due to lack of moisture, hail damage, flooding, herbicide injury, mechanical injury, insects, or widely fluctuating tempera- tures as injury may result. • DO NOT apply through any type of irrigation equipment. • DO NOT treat irrigation ditches or water used for crop irrigation or domestic purposes. • Accent® (nicosulfuron) • Acquire® (glyphosate) • Ally® (metsulfuron methyl) • Amber® (triasulfuron) • Asulox® (asulam) • Atrazine • Axiom TM (flufenacet + metribuzin) • Basagran® (bentazon) • Beacon® (primisulfuron-methyl) • Bicep II Magnum® (s-metolachlor + atrazine) • Bronate® (bromoxynil + MCPA) • Bronco® (alachlor + glyphosate) • Buctril® (bromoxynil) • Bullet® (alachlor + atrazine) • Canvas® (thifensulfuron + tribenuron + metsulfuron) • Caparol® (prometryn) • Crossbow® (2,4-D + triclopyr) • Curtail® (clopyralid + 2,4-D) • Cyclone® (paraquat) • Dakota® (fenoxaprop + MCPA) • DegreeTM (acetochlor) • Degree XtraTM (acetochlor + atrazine) • DoublePlay® (acetochlor

• EPTC) • Dual Magnum® (s-metolachlor) • Eradicane® (EPTC) • Evik® (ametryn) • Exceed® (primisulfuron + prosulfuron) • Express® (thifensulfuron + tribenuron-methyl) • Fallow Master® (glyphosate + dicamba) • Field MasterTM (acetochlor + atrazine + glyphosate) • Finesse® (chlorsulfuron + metsulfuron-methyl) • FulTimeTM (acetochlor + atrazine) • Garlon® (triclopyr) • GleanTM (chlorsulfuron) • Gramoxone® Extra (paraquat) • Guardsman® (dimethenamid + atrazine) • G-Max LiteTM (dimethenamid-P + atrazine) • Harmony® Extra (thifensulfuron + tribenuron-methyl) • HarnessTM (acetochlor) • Harness® Xtra (acetochlor + atrazine) • Hornet® (flumetsalam + clopyralid) • Karmex® (diuron) • Kerb® (pronamide) • Laddok® S-12 (bentazon
• atrazine) • Landmaster® BW (glyphosate + 2,4-D) • Lariat® (alachlor + atrazine) • Lasso® (alachlor) • Lexone® (metribuzin) • Liberty® (glufosinate) • Lightning® (imazethapyr
• imazapyr) • Marksman® (dicamba + atrazine) • MCPA • Outlook TM (dimethenamid-P) • Paramount® (quinclorac) • Partner® (alachlor) • Peak® (prosulfuron) • Permit® (halosulfuron) • Princep® (simazine) • Prowl® (pendimethalin) • Prowl® H2O (pendimethalin) • Python® (flumetsulam) • Ramrod® (propachlor) • Roundup Ultra® (glyphosate) • Roundup Ultra® RT (glyphosate) • Sencor® (metribuzin) • Spirit® (primisulfuron + prosulfuron) • Stinger® (clopyralid) • Surpass® (acetochlor) • Sutan®+ (butylate) • Tiller® (fenoxaprop ethyl + MCPA + 2,4-D) • TopNotchTM (acetochlor) • Tordon® 22K (picloram) • Touchdown® (sulfosate) • 2,4-D

12 Table 4. Crop-specific Maximum Use Rates1 Crop Maximum Rate per Acre per Application (ozs) Maximum In-crop Rate per Acre per Season (ozs) Asparagus 12 12 Barley, fall Barley, spring 6 6 8.5 8 Conservation Reserve Program (CRP) 24 48 Corn 12 17 Cotton 6 6 Fallow ground 24 24 Grass grown for seed 24 48 Oats 3 3 Pastureland 24 24 Proso millet 3 3 Sorghum 6 12 Soybeans 24 48 Sugarcane 24 48 Triticale 3 3 Turf 24 24 Wheat 6 12 1Refer to Crop-specific Information section for more details.

13 Crop-specific Information Apply SAN 845H herbicide to emerged and actively growing weeds in 40 to 60 gallons of diluted spray per treated acre immediately after cutting the field, but at least 24 hours before the next cutting. Multiple applications may be made per growing season. If spray contacts emerged spears, crooking (twisting) of some spears may result. If such crooking occurs, discard affected spears. Rates: Apply 6 to 12 ounces of SAN 845H to control annual sowthistle, black mustard, Canada and Russian thistle, and redroot pigweed (carelessweed). Apply 12 ounces of SAN 845H to control common chick- weed, field bindweed, nettleleaf goosefoot, and wild radish. Multiple applications may be made per growing season. DO NOT exceed a total of 12 ounces of SAN 845H per treated acre, per crop year. DO NOT harvest prior to 24 hours after treatment. DO NOT use in the Coachella Valley of California. Asparagus Tank Mixes Apply 6 to 12 ounces of SAN 845H with glyphosate (Roundup Ultra® herbicide) or 2,4-D to improve control of Canada thistle and field bindweed. PREPLANT DIRECTIONS (POSTHARVEST, FALLOW, CROP STUBBLE, SET-ASIDE) FOR BROADLEAF WEED CONTROL SAN 845H can be applied either postharvest in the fall, spring, or summer during the fallow period or to crop stubble/set-aside acres. Apply SAN 845H as a broadcast or spot treatment to emerged and actively growing weeds after crop harvest (postharvest) and before a killing frost or in the fallow cropland or crop stubble the following spring or summer. See Crop Rotational Restrictions in the Restrictions and Limitations section for the required interval between application and planting to prevent crop injury. Rates and Timings Apply 3 to 24 ounces of SAN 845H per acre. Refer to Table 2 to determine use rates for specific targeted weed species. For best performance, apply SAN 845H when annual weeds are less than 6" tall, when biennial weeds are in the rosette stage and to perennial weed regrowth in late summer or fall following a mowing or tillage treatment. The most effective control of upright perennial broadleaf weeds such as Canada thistle and Jerusalem artichoke occurs if SAN 845H is applied when the majority of weeds have at least 4" to 6" of regrowth or for weeds such as field bindweed and hedge bindweed that are in or beyond the full bloom stage. Avoid disturbing treated areas following application. Treatments may not kill weeds that develop from seed or underground plant parts such as rhizomes or bulblets after the effective period for SAN 845H. For seedling control, a follow-up program or other cultural practices could be instituted. For small grain in-crop uses of SAN 845H, refer to the small grain section for details. Between-crop Tank Mixes In tank mixes with other suitable registered herbicides, including one or more of the following herbicides, apply 3 to 12 ounces of SAN 845H per acre for control of annual weeds, or 12 to 24 ounces of SAN 845H per acre for control of biennial and perennial weeds. Direct contact of SAN 845H with corn seed must be avoided. If corn seeds are less than 1.5" below the soil surface, delay application until corn has emerged. Applications of SAN 845H to corn during periods of rapid growth may result in temporary leaning. Corn will usually become erect within 3 to 7 days. Cultivation should be delayed until after corn is growing normally to avoid breakage. Corn may be harvested or grazed for feed once the crop has reached the ensilage (milk) stage or later in maturity. Up to 2 applications of SAN 845H may be made during a growing season. Sequential applications must be sepa- rated by 2 weeks or more. DO NOT exceed a total of 17 ounces of SAN 845H per acre per crop year. DO NOT apply SAN 845H to seed corn or popcorn with- out first verifying with your local seed corn company (supplier) the selectivity of SAN 845H on your inbred line or variety of popcorn. This precaution will help avoid potential injury of sensitive varieties. Avoid using crop oil concentrates after crop emergence as crop injury may result. Use of crop oil concentrates is recommended only in dry conditions when corn is less Corn (Field, Pop, Seed, and Silage) Asparagus • Acquire® • Ally® • Amber® • Atrazine • Curtail® • Cyclone® • Fallow Master® • Finesse® • glyphosate (e.g. Roundup Ultra) • Gramoxone® Extra • Kerb® • Landmaster® BW • Paramount® • Sencor® • Tordon® 22K • Touchdown® • 2,4-D Between-crop Applications

14 than 5" tall and when applying SAN 845H herbicide alone or tank mixed with atrazine. Use of sprayable fluid fertilizer as the carrier is not recom- mended for applications of SAN 845H made after corn emergence. SAN 845H is not registered for use on sweet corn. PREPLANT AND PREEMERGENCE APPLICATION IN NO TILLAGE CORN Rates: Apply 12 ounces of SAN 845H per acre on medium- or fine-textured soils containing 2.5% or greater organic matter. Use 6 ounces of SAN 845H per acre on coarse soils (sand, loamy sand, and sandy loam) or medium- and fine-textured soils with less than 2.5% organic matter. Timing: SAN 845H can be applied to emerged weeds before, during, or after planting a corn crop. When planting into a legume sod (e.g. alfalfa or clover), apply SAN 845H after 4" to 6" of regrowth has occurred. PREEMERGENCE APPLICATION IN CONVENTIONALOR REDUCED TILLAGE CORN Rates: Apply 12 ounces of SAN 845H per treated acre to medium- or fine-textured soils that contain 2.5% organic matter or more. DO NOT apply to coarse-textured soils (sand, loamy sand, or sandy loam) or any soil with less than 2.5% organic matter until after corn emergence (see Early Post emergence uses below). Timing: SAN 845H may be applied after planting and prior to corn emergence. Preemergence application of SAN 845H does not require mechanical incorporation to become active. A shallow mechanical incorporation is recommended if the application is not followed by adequate rainfall or sprinkler irrigation. Avoid tillage equip- ment (e.g. drags, harrows) that concentrate treated soil over seed furrow, as seed damage could result. Preemergence control of cocklebur, jimsonweed, and velvetleaf may be reduced if conditions such as low temperature or lack of soil moisture cause delayed or deep germination of weeds. EARLY POSTEMERGENCE APPLICATION IN ALL TILLAGE SYSTEMS Rates: Apply 12 ounces of SAN 845H per treated acre. Reduce the rate to 6 ounces of SAN 845H per treated acre for corn grown on coarse-textured soils (sand, loamy sand, and sandy loam). Timing: Apply between corn emergence and the 5-leaf stage or 8" tall, whichever occurs first. Refer to Late Postemergence Application if the sixth true leaf is emerging from whorl or the corn is greater than 8" tall. LATE POSTEMERGENCE APPLICATION Rate: Apply 6 ounces of SAN 845H per treated acre. Timing: Apply SAN 845H from 8" to 36" tall corn or 15 days before tassel emergence, whichever comes first. For best performance, apply when weeds are less than 3" tall. Apply directed spray when corn leaves prevent proper spray coverage, sensitive crops are growing nearby, or tank mixing with 2,4-D. DO NOT apply SAN 845H when soybeans are growing nearby if any of these conditions exist: • Corn is more than 24" tall • Soybeans are more than 10" tall • Soybeans have begun to bloom Corn Tank Mixes or Sequential Uses When using tank mix or sequential applications with SAN 845H, always follow the companion product label to determine specific use rates by soil types, weed species, and weed or crop growth stage. In addition, follow precau- tions and restrictions including state and local use restrictions that may apply to specific products. Apply SAN 845H prior to, in tank mix with, or after other suitable registered herbicides, including one or more of the following herbicides. • Accent®1 • Acquire® • Atrazine • AxiomTM • Banvel®1 • Beacon®1 • Bicep® • Bullet® • Clarity®1 • DegreeTM • Degree XtraTM • DoublePlay®2 • Dual MagnumTM • Dual II Magnum® • Eradicane® • Exceed®1 • Field Master® • FulTime® • Gramoxone® Extra • Guardsman® Max • G-Max LiteTM • Harness® • Harness® Xtra • HornetTM 1 • Laddok® S-12 • Lasso® • Liberty®3 • Lightning® 5 • Marksman®1 • Outlook® • Permit®1 • Princep® • Prowl® • PythonTM • Roundup Ultra® 4 • Roundup Ultra® RT • SpiritTM 1 • Stinger®1 • Surpass® • Sutan® + 2 • TopNotchTM • Touchdown® • 2,4-D 1 1 See Table 5. Specific Guidelines for Tank Mixes or Sequential Use Programs for additional limitations or restric- tions that apply for tank mix or sequential use programs with these products. 2 Sequential use only. 3 Use only on LibertyLink® (glufosinate-tolerant) corn hybrids. 4 Includes postemergence use on Roundup Ready® (glyphosate-tolerant) corn hybrids. 5 Use only Clearfield® (imidazolinone-tolerant) corn hybrids.

15 Table 5. Specific Guidelines for Tank Mixes or Sequential Use Programs Tank Mix Partner Rate Per Acre Accent® or Beacon® When tank mixing, applications immediately following extreme day or night temperature fluctuations or applications when daytime temperatures do not exceed 50º F may result in decreased weed control or crop injury. Delay applica- tion until the temperatures warm and both weeds and crop resume normal growth. 2,4-D To provide maximum crop safety after corn emergence, use this tank mix only after corn is greater than 8" tall and when application can be made with drop pipes that direct spray beneath corn leaves and away from the whorl of the corn. The maximum rate of 2,4-D in this tank mix is 0.125 pound of acid equivalent per acre. Banvel®, Clarity®, or Marksman® Tank mixes with these products that contain dicamba must not exceed a total combined rate of 0.50 pound of dicamba acid equivalent per acre (0.25 pound on coarse-textured soils or on any soil when corn is greater than 8" tall). Sequential applications of these products must be separated by a minimum of 2 weeks (unless the combined rate is less than 0.5 pound of dicamba acid equiv- alent and corn is 8" tall or less) and must not exceed a combined total of 0.75 pound dicamba acid equivalent per acre for in-crop use. Exceed®, SpiritTM, Stinger®, HornetTM, or Permit® For improved control of velvetleaf, tank mix 0.25 to 0.5 ounce of Exceed, 0.5 ounce of Spirit, or 0.17 to 0.33 ounce Permit per acre with SAN 845H herbicide. For improved control of Canada thistle, Stinger at 1.5 to 3 fluid ounces per acre or Hornet at 0.6 to 1.2 ounces per acre may be tank mixed with SAN 845H. Use the higher rate in the range for heavier infestations of these weeds. PREPLANT APPLICATION Apply up to 6 ounces of SAN 845H per acre to control emerged broadleaf weeds prior to planting cotton in conventional or conservation tillage systems. For best performance, apply SAN 845H when weeds are in the 2 to 4 leaf stage and rosettes are less than 2" across. Following application of SAN 845H and a minimum accu- mulation of 1" of rainfall or overhead irrigation, a waiting interval of 21 days is required per 6 ounces per acre or less. These intervals must be observed prior to planting cotton. DO NOT apply preplant to cotton west of the Rockies. DO NOT make SAN 845H preplant applications to cotton in geographic areas with average annual rainfall less than 25". If applying a spring preplant treatment following application of a fall preplant (postharvest) treatment, the combination of both treatments must not exceed 48 ounces per acre. Cotton Tank Mixes For control of grasses or additional broadleaf weeds, SAN 845H may be tank mixed with Bladex®, Caparol®, Gramoxone® Extra, and Roundup Ultra® RT herbicides. Apply 6 to 12 ounces of SAN 845H per treated acre on seedling grass after the crop reaches the 3 to 5 leaf stage. Apply up to 24 ounces of SAN 845H on well-established perennial grass. For best performance, apply SAN 845H when weeds are in the 2 to 4 leaf stage and rosettes are less than 2" across. Use the higher level of listed rate ranges when treating more mature weeds or dense vege- tative growth. To suppress annual grasses such as brome (downy and ripgut), rattail fescue, and windgrass, apply up to 24 ounces of SAN 845H per treated acre in the fall or late summer after harvest and burning of established grass seed crops. Applications should be made immediately following the first irrigation when the soil is moist and before weeds have more than 2 leaves. DO NOT apply SAN 845H after the grass seed crop begins to joint. Grass Grown for Seed Cotton

16 Refer to the Pasture, Hay, Rangeland, and Farmstead section for grazing and feeding restrictions. Grass Seed Tank Mixes SAN 845H herbicide may be applied in tank mixes with one or more of the following herbicides. For use only within Colorado, Nebraska, North Dakota, South Dakota, and Wyoming. SAN 845H combined with 2,4-D will provide control or suppression of the annual broadleaf weeds listed in Table 1. Apply 3 ounces of SAN 845H with 0.375 pound ai/A of 2,4-D products. Apply the tank mix of Clarity ® herbicide

• 2,4-D as a broadcast or spot treatment to emerged and actively growing weeds and when proso millet is in the 2 to 5 leaf stage. Use directions for 2,4-D products vary with manufacturers. Refer to a 2,4-D product with labeling consistent with the crop stage timing for Clarity. Some types of proso millet may be affected adversely by a tank mix of Clarity + 2,4-D. DO NOT apply unless possible proso millet crop injury will be acceptable. Restrictions for proso millet grazed or cut for hay are indi- cated in Table 6. Timing Restrictions for Lactating Dairy Animals Following Treatment in Pasture, Hay, Rangeland, and Farmstead section of this label. SAN 845H may be used on pasture, hay, rangeland, and farmstead (noncropland) (including fencerows and non- irrigation ditchbanks) for control or suppression of broadleaf weed and brush species listed in Table 1. SAN 845H may also be applied to noncropland areas to control broadleaf weeds in noxious weed control programs, districts, or areas including broadcast or spot treatment of roadsides and highways, utilities, railroad, and pipeline rights-of-way. Noxious weeds must be recognized at the state level, but programs may be administered at state, county, or other level. SAN 845H uses described in this section also pertain to small grains (forage sorghum, rye, sudangrass, or wheat) grown for pasture use only. Some perennial weeds may be controlled with lower rates of either SAN 845H or SAN 845H plus 2,4-D (refer to Tab le 2. Rates and Timings Refer to Table 2 for rate selection based on targeted weed or brush species. Some weed species will require tank mixes for adequate control. DO NOT broadcast apply more than 24 ounces per acre. Retreatments may be made as needed; however, DO NOT exceed a total of 24 ounces of SAN 845H per treated acre during a growing season. Crop-specific Restrictions and Limitations DO NOT apply more than 12 ounces of SAN 845H per acre to small grains grown for pasture. Newly seeded areas may be severely injured if more than 12 ounces of SAN 845H is applied per acre. Established grass crops growing under stress can exhibit various injury symptoms that may be more pronounced if herbicides are applied. Bentgrass, carpetgrass, buffalo- grass, and St. Augustinegrass may be injured if more than 12 ounces of SAN 845H is applied per acre. Usually colonial bentgrasses are more tolerant than creeping types. Velvetgrasses are most easily injured. Treatments will kill or injure alfalfa, clovers, lespedeza, wild winter peas, vetch, and other legumes. There are no grazing restrictions for animals other than lactating dairy animals. Table 6 lists the timing restrictions for grazing or harvesting hay from treated fields. Table 6. Timing Restrictions for Lactating Dairy Animals Following Treatment SAN 845H can be applied using water, oil in water emul- sions including invert systems, or sprayable fluid fertilizer as a carrier (refer to the Compatibility Test for Mix Components). To prepare oil in water emulsions, half-fill spray tank with water, then add the appropriate amount of emulsifier. With continuous agitation, slowly add the herbicide and then the oil (such as diesel oil or fuel oil) or a premix of oil plus additional emulsifier to spray tank. Complete filling of spray tank with water. Maintain vigorous agitation during spray operation to prevent oil and water from forming separate layers. SAN 845H may be applied broadcast using either ground or aerial application equipment. Pasture, Hay, Rangeland, and Farmstead (noncropland) Proso Millet SAN 845H Rate per Treated Acre Days Before Grazing Days Before Hay Harvest Up to 12 ounces 7 days 37 days Up to 24 ounces 21 days 51 days Up to 48 ounces 40 days 70 days • Buctril® • Curtail® • Express® • Karmex® • MCPA amine • Sencor® • Stinger® • 2,4-D amine or ester

17 Aerial Application • Spray Volume. Use 2 to 40 gallons of diluted spray per treated acre in a water-based carrier. Ground Application • Spray Volume. Use 3 to 600 gallons of diluted spray per treated acre. The volume of spray applied will depend on the height, density, and type of weeds or brush being treated and on the type of equipment being used. • Spot Treatments. SAN 845H herbicide may be applied to individual clumps or small areas of undesirable vegetation using handgun or similar types of application equipment. Apply diluted sprays to allow complete wetting (up to runoff) of foliage and stems. Cut Surface Treatments SAN 845H may be applied as a cut surface treatment for control of unwanted trees and prevention of sprouts of cut trees. Rate: Mix 30 to 90 ounces SAN 845H with 1 gallon water to create the application solution. Use the lower dilution rate when treating difficult-to-control species. • Frill or Girdle Treatments: Make a continuous cut or a series of overlapping cuts using an axe to girdle tree trunk. Spray or paint the cut surface with the solution. • Stump Treatments: Spray or paint freshly cut surface with the water mix. The area adjacent to the bark should be thoroughly wet. NOTE: For more rapid foliar effects, 2,4-D may be added to the solution. Applications For Control of Dormant Multiflora Rose SAN 845H can be applied when plants are dormant as a spot treatment to the soil or as a Lo-Oil basal bark treat- ment using an oil-water emulsion solution. • Spot treatments. Spot treatment applications of SAN 845H should be applied directly to the soil as close as possible to the root crown but within 6" to 8" of the crown. On sloping terrain, apply SAN 845H to the uphill side of the crown. DO NOT apply when snow or water prevents applying SAN 845H directly to the soil. The use rate of SAN 845H depends on the canopy diameter of the multiflora rose. Examples: Use 0.18, 0.72, or 1.7 ounces of SAN 845H respectively, for 5, 10, or 15 feet canopy diameters. • Lo-Oil basal bark treatments. For Lo-Oil basal bark treatments, apply SAN 845H to the basal stem region from the ground line to a height of 12" to 18". Spray until runoff, with special emphasis on covering the root crown. For best results, apply SAN 845H when plants are dormant. DO NOT apply after bud break or when plants are showing signs of active growth. DO NOT apply when snow or water prevents applying SAN 845H to the ground line. To prepare approximately 2 gallons of a Lo-Oil spray solution:

1. Combine 1.5 gallons of water, 1 ounce of emulsifier, 12 ounces of SAN 845H, and 2.5 pints of No. 2 diesel fuel.
2. Adjust the amounts of materials used proportionately to the amount of final spray solution desired. DO NOT exceed 8 gallons of spray solution mix applied per acre, per year. Pasture Tank Mixes SAN 845H may be applied in tank mixes with other suit- able registered herbicides, including one or more of the following herbicides.Conservation Reserve Program (CRP) SAN 845H may be used on both newly seeded and established grasses grown in Conservation Reserve or federal set-aside programs. Treatments of SAN 845H will injure or may kill alfalfa, clovers, lespedeza, wild winter peas, vetch, and other legumes. NEWLY SEEDED AREAS SAN 845H may be applied either preplant or postemer- gence to newly seeded grasses or small grains such as barley, oats, rye, sudangrass, wheat, or other grain species grown as a cover crop that are listed on the label. Postemergence applications may be made after seedling grasses exceed the 3-leaf stage. Rates of SAN 845H greater than 12 ounces per treated acre may severely injure newly seeded grasses. Preplant applications may injure new seedlings if the inter- val between application and grass planting is less than 45 days per 12 ounces of SAN 845H applied per treated acre west of the Mississippi River or 20 days per 12 ounces applied east of the Mississippi River. ESTABLISHED GRASS STANDS Established grass stands are perennial grasses planted one or more seasons prior to treatment. Certain species (bentgrass, carpetgrass, smooth brome, buffalograss, or St. Augustine grass) may be injured when treated with more than 12 ounces of SAN 845H per treated acre. When applied at specified rates, SAN 845H will control many annual and biennial weeds and provide control or suppression of many perennial weeds. • Acquire® • Ally® • Amber® • Crossbow® • Curtail® • Garlon® • Gramoxone® Extra • Roundup Ultra® RT • Stinger® • Tordon® 22K • 2,4-D

18 Rates and Timings: Apply 3 to 24 ounces of SAN 845H herbicide per acre. Refer to Table 2 for rates based on target weed species. SAN 845H may be tank mixed or applied sequentially with other products labeled for use in Conservation Reserve Programs such as atrazine, Cyclone ®, glyphosate (Acquire®, Roundup Ultra®), Gramoxone® Extra, Touchdown®, or 2,4-D. Retreatments may be made as needed; however, DO NOT exceed a total of 48 ounces of SAN 845H per acre. SAN 845H combinations with listed tank mix partners will provide control or suppression of the annual broadleaf weeds listed in Table 1. For improved control of listed weeds, tank mix SAN 845H with one or more of the herbi- cides listed. SAN 845H used in a tank mix with other herbicides offers the best spectrum of weed control and herbicide tolerant or resistant weed management. Refer to the specific section crop for SAN 845H application rate and timing. For applications prior to weed emergence or when sulfonylurea-resistant weeds are present or suspected, tank mix a minimum of 2 ounces of SAN 845H per treated acre with a non-sulfonylurea herbicide such as 2,4-D or MCPA. Tank mixing SAN 845H with these products will offer more consistent control of sulfonylurea-resistant weeds. Additives: When tank mixing SAN 845H with sulfonylurea herbicides (such as Ally ®, Amber®, Canvas®, Express®, Finesse®, Glean®, Harmony® Extra, and Peak®), use 1 to 4 pints of an agriculturally approved surfactant (containing at least 80% active ingredient) per 100 gallons of spray or not more than 0.25 to 0.5% by volume. Use the highest rate of surfactant when using the lower rate ranges of the tank mix or when treating more mature and difficult-to-control weeds or dense vegetative growth. Refer to the specific crop sections below for use rates. When treating difficult-to-control weeds such as kochia, wild buckwheat, cow cockle, prostrate knotweed, Russian thistle, and prickly lettuce or when dense vegetative growth occurs, use the 2 to 3 ounces of SAN 845H per acre. Timings: Apply SAN 845H before, during, or after plant- ing small grains (barley, oat, triticale, wheat). See specific small grain crop uses below for maximum crop stage. For best performance, apply SAN 845H when weeds are in the 2 to 3 leaf stage and rosettes are less than 2" across. Applying SAN 845H to small grains during periods of rapid growth may result in crop leaning. This condition is tempo- rary and will not reduce crop yields. Applications to small grains may be made with aerial appli- cations with 1 gallon of water or more per acre. Where dense foliage is present, 2 to 3 gallons of water per acre should be used. Restrictions for small grain areas that are grazed or cut for hay are indicated in Table 6 in Pasture, Hay, Rangeland, and Farmstead section of this label. EARLY SEASON APPLICATIONS Apply 1.5 to 3 ounces of SAN 845H to fall-seeded barley prior to the jointing stage. Apply 1.5 to 2 ounces of SAN 845H before spring-seeded barley exceeds the 4-leaf stage. NOTE: For spring barley varieties that are seeded during the winter months or later, follow the rates and timings for spring-seeded barley. DO NOT tank mix SAN 845H with 2,4-D in early season applications on spring-seeded barley. PREHARVEST APPLICATIONS SAN 845H can be used to control weeds that may inter- fere with harvest of fall-seeded and spring-seeded barley. Apply 6 ounces of SAN 845H per acre as a broadcast or spot treatment to annual broadleaf weeds when barley is in the hard dough stage and the green color is gone from the nodes (joints) of the stem. Best results will be obtained if application can be made when weeds are actively grow- ing, but before weeds canopy. A waiting interval of 7 days is required before harvest. DO NOT use preharvest-treated barley for seed unless a germination test is performed on the seed with an accept- able result of 95% germination or better. For control of additional broadleaf weeds or grasses, SAN 845H may be tank mixed with other herbicides, such as 2,4-D, labeled for preharvest uses in barley. DO NOT make preharvest applications in California. Small Grains: Barley (fall-seeded and spring-seeded) Small Grains: Not underseeded to legumes (fall-seeded and spring-seeded barley, oat, triticale, and wheat)

19 Barley Tank Mixes SAN 845H herbicide may be applied in tank mixes with other suitable registered herbicides, including one or more of the following herbicides. Follow the most restrictive of the labeling limitations and precautions of all products used in the tank mix. Table 7. EARLY SEASON APPLICATIONS Apply 1.5 to 3 ounces of SAN 845H per acre to fall- seeded oat prior to the jointing stage. Apply 1.5 to 3 ounces of SAN 845H before spring-seeded oat exceeds the 5-leaf stage. SAN 845H may be tank mixed with other suitable regis- tered herbicides, such as MCPA amine or ester, for applications in oat. DO NOT tank mix SAN 845H with 2,4-D in oat. EARLY SEASON APPLICATIONS Apply 1.5 to 3 ounces of SAN 845H to triticale. Early season applications to fall-seeded triticale must be made prior to the jointing stage. Early season applications to spring-seeded triticale must be made before triticale reaches the 6-leaf stage. Triticale Tank Mixes: For best performance, should be used in tank mix combination with bromoxynil ( Buctril, Moxy TM 2E) herbicide. EARLY SEASON APPLICATIONS Apply 1.5 to 3 ounces of SAN 845H to wheat unless using one of the fall-seeded wheat specific programs below. Early season applications to fall-seeded wheat must be made prior to the jointing stage. Early season applications to spring-seeded wheat must be made before wheat exceeds the 6-leaf stage. Early developing wheat varieties such as TAM 107, Madison, or Wakefield must receive application between early tillering and the jointing stage. Care should be taken in staging these varieties to be certain the application occurs prior to the jointing stage. To improve control of Russian thistle, flixweed, gromwell, or mayweed, add 2,4-D amine or ester to a tank mix with other suitable registered herbicides such as one of the following herbicides: Ally ®, Amber®, Canvas®, Express®, Finesse®, Glean®, Harmony® Extra, or Peak®. SPECIFIC USE PROGRAMS FOR FALL-SEEDED WHEAT ONLY SAN 845H may be used at 4 ounces on fall-seeded wheat in western Oregon as a spring application only. In Colorado, Kansas, New Mexico, Oklahoma, and Texas, up to 6 ounces of SAN 845H may be applied on fall-seeded wheat after it exceeds the 3-leaf stage for suppression of perennial weeds, such as field bindweed. Applications may be made in the fall following a frost but before a killing freeze. SAN 845H may be tank mixed with 2,4-D amine at 6 ounces after wheat begins to tiller. Periods of extended stress such as cold and wet weather may enhance the possibility of crop injury. For fall applications only, DO NOT use if the potential for crop injury is not acceptable. PREHARVEST APPLICATIONS SAN 845H can be used to control weeds that may inter- fere with harvest of wheat. Apply 6 ounces SAN 845H per Small Grains: Wheat (fall-seeded and spring-seeded) Small Grains: Oat (fall-seeded and spring-seeded) Small Grains: Triticale (fall-seeded and spring-seeded) Tank Mix Partner Rate Per Acre Ally® 0.05 to 0.1 ounce1 Amber® 0.14 to 0.28 ounce1 Bronate® 0.75 to 1.5 pints Buctril® 1 to 1.5 pints Canvas® 0.2 to 0.4 ounce1 Express® 0.083 to 0.167 ounce1 Finesse® 0.167 to 0.33 ounce1 Glean® 0.167 ounce1 Harmony® Extra 0.167 to 0.33 ounce1 MCPA amine or ester 8 to 12 fluid ounces2 (0.25 to 0.375 pound a.e.) Metribuzin (Sencor®, Lexone®) 0.125 to 0.47 pound a.i. 2,4-D amine or ester 8 fluid ounces 2,3 (0.25 pound a.e.) 1 DO NOT use low rates of sulfonylureas ( Ally, Amber, Canvas, Express, Finesse, Glean, and Harmony Extra) on more mature weeds or on dense vegetative growth. 2 When using formulations other than 4 pounds per gallon use pounds of a.e. per acre listed. 3 This tank mix is for fall-seeded barley only.

20 acre as a broadcast or spot treatment to annual broadleaf weeds when wheat is in the hard dough stage and the green color is gone from the nodes (joints) of the stem. Best results will be obtained if application can be made when weeds are actively growing but before weeds canopy. A waiting interval of 7 days is required before harvest. DO NOT use preharvest-treated wheat for seed unless a germination test is performed on the seed with an accept- able result of 95% germination or better. For control of additional broadleaf weeds or grasses, SAN 845H herbicide may be tank mixed with other herbicides such as Ally ®, Roundup Ultra®, and 2,4-D. DO NOT make preharvest applications in California. Wheat Tank Mixes SAN 845H may be applied in tank mixes with other suit- able registered herbicides, including one or more of the following herbicides. Table 8. SAN 845H may be applied preplant, postemergence, or preharvest in sorghum to control many annual broadleaf weeds and to reduce competition from established per - ennial broadleaf weeds, as well as control their seedlings. DO NOT graze or feed treated sorghum forage or silage prior to mature grain stage. If sorghum is grown for pasture or hay, refer to Pasture, Hay, Rangeland, and Farmstead section of this label for specific grazing and feeding restrictions. Tank Mix Partner Rate Per Acre Ally 0.05 to 0.1 ounce1 Amber® 0.14 to 0.28 ounce1 Bronate® 0.75 to 1.5 pints Buctril® 1 to 1.5 pints Canvas® 0.2 to 0.4 ounce1 Curtail® 2 to 2.67 pints Dakota® 2 16 fluid ounces Express® 0.083 to 0.167 ounce1 Finesse® 0.167 to 0.33 ounce1 Glean® 0.167 ounce1 Harmony® Extra 0.167 to 0.33 ounce1 Karmex® 3 0.5 to 1.5 pounds Glyphosate (Roundup Ultra® RT)4 12 to 16 fluid ounces MCPA amine or ester5 8 to 12 fluid ounces (0.25 to 0.375 pound a.e.) Metribuzin3 (Sencor®, Lexone®) 0.25 to 0.375 pound a.i. Peak® 1 0.25 to 0.38 ounce Stinger® 4 to 5.33 fluid ounces Tiller® 2 1 to 1.7 pints 2,4-D amine or ester5 8 to 12 fluid ounces (0.25 to 0.375 pound a.e.) 1 DO NOT use low rates of sulfonylurea herbicides, such as Ally, Amber, Canvas, Express, Finesse, Glean, Harmony Extra, and Peak on more mature weeds or on dense vegeta- tive growth. 2 DO NOT use Clarity as a tank mix treatment with Dakota or Tiller on Durum wheat. DO NOT tank mix with Tiller if wild oat is the target weed. 3 Tank mixes with Karmex and metribuzin are for use in fall- seeded wheat only. 4 A tank mix of up to 3 ounces of SAN 845H with Roundup Ultra RT or any glyphosate formulation labeled for use as a preplant application to small grains may be applied with no waiting period prior to planting. 5 Up to 32 fluid ounces of (1.0 pound a.e.) may be used on fall- seeded wheat if crop injury is acceptable. When using formu- lations other than 4 pounds per gallon, use the pounds of a.e. per acre listed. Sorghum

21 DO NOT apply SAN 845H herbicide to sorghum grown for seed production. PREPLANT APPLICATION Up to 6 ounces of SAN 845H may be applied per acre if applied at least 15 days before sorghum planting. POSTEMERGENCE APPLICATION Up to 6 ounces of SAN 845H per acre may be applied after sorghum is in the spike stage (all sorghum emerged) but before sorghum is 15" tall. For best performance, apply SAN 845H when the sorghum crop is in the 3 to 5 leaf stage and weeds are small (less than 3" tall). Use drop pipes (drop nozzles) if sorghum is taller than 8". Keep the spray off the sorghum leaves and out of the whorl to reduce the likelihood of crop injury and to improve spray coverage of weed foliage. Applying SAN 845H to sorghum during periods of rapid growth may result in temporary leaning of plants or rolling of leaves. These effects are usually outgrown within 10 to 14 days. Preharvest uses in Texas and Oklahoma only: Up to 6 ounces of SAN 845H per acre may be applied for weed suppression any time after the sorghum has reached the soft dough stage. An agriculturally approved surfactant may be used to improve performance. For aerial applica- tions, use at least 2 gallons of water-based carrier per treated acre. Delay harvest until 30 days after a preharvest treatment. SPLIT APPLICATION SAN 845H may be applied in split applications: preplant followed by postemergence or preharvest; or postemer- gence followed by preharvest. DO NOT exceed 6 ounces per acre, per application or a total of 12 ounces per acre, per season. Sorghum Tank Mixes and Sequential Treatments SAN 845H may be applied prior to, in a tank mix with, or after one or more of the following herbicides. PREPLANT APPLICATIONS Apply 3 to 12 ounces of SAN 845H per acre to control emerged broadleaf weeds prior to planting soybeans. DO NOT exceed 12 ounces of SAN 845H per acre in a spring application prior to planting soybeans. Following application of SAN 845H and a minimum accumulation of 1" rainfall or overhead irrigation, a waiting interval of 14 days is required for 6 ounces per acre or less, and 28 days for 12 ounces per acre. These intervals must be observed prior to planting soybeans or crop injury may occur. DO NOT make SAN 845H preplant applications to soybeans in geographic areas with average annual rainfall less than 25". PREHARVEST APPLICATIONS SAN 845H can be used to control many annual and perennial broadleaf weeds and control or suppress many biennial and perennial broadleaf weeds in soybean prior to harvest (refer to Table 1). Apply 6 to 24 ounces of SAN 845H per acre as a broadcast or spot treatment to emerged and actively growing weeds after soybean pods have reached mature brown color and at least 75% leaf drop has occurred. Soybeans may be harvested 7 days or more after a preharvest application. Treatments may not kill weeds that develop from seed or underground plant parts, such as rhizomes or bulblets, after the effective period for SAN 845H. For seedling control, a follow-up program or other cultural practice could be instituted. DO NOT use preharvest-treated soybean for seed unless a germination test is performed on the seed with an acceptable result of 95% germination or better. DO NOT feed soybean fodder or hay following a prehar- vest application of SAN 845H. DO NOT make preharvest applications in California. Soybean Tank Mixes PREPLANT TANK MIXES SAN 845H may be tank mixed with other herbicides regis- tered for early preplant use in soybeans including burn- down herbicides such as glyphosate ( Acquire, Roundup Ultra) and 2,4-D or residual herbicides such as Outlook, Frontier, or Dual Magnum. PREHARVEST TANK MIXES SAN 845H may be tank mixed with other herbicides regis- tered for preharvest use in soybeans such as glyphosate (Roundup Ultra) and Gramoxone Extra. • Acquire® • Atrazine • Basagran® • Bicep II Magnum® • Buctril® • Cyclone® • Dual Magnum™ • Dual II Magnum® • Fallow Master® • Frontier® • Gramoxone® Extra • Guardsman® • Laddok® S-12 • Landmaster® • Lasso® • Outlook® • Paramount® • Peak® • Permit® • Ramrod® • Roundup Ultra® Soybean

22 Apply SAN 845H herbicide for control of annual, biennial, or perennial broadleaf weeds listed in Table 1. Apply 6 to 17 ounces of SAN 845H per acre for control of annual weeds, 12 to 24 ounces for control of biennial weeds, and 24 ounces for control or suppression of perennial weeds. Use the higher level of listed rate ranges when treating dense vegetative growth. Retreatments may be made as needed; however, DO NOT exceed a total of 48 ounces of SAN 845H per treated acre during a growing season. Timing: SAN 845H may be applied to sugarcane any time after weeds have emerged but before the close-in stage of sugarcane. Applications of 24 ounces of SAN 845H per acre made over the top of actively growing sugarcane may result in crop injury. When possible, direct the spray beneath the sugarcane canopy to minimize the likelihood of crop injury. Using directed sprays will also help maximize the spray coverage of weed foliage. DO NOT apply SAN 845H within 87 days of harvest. Preharvest interval (PHI) is 87 days. Sugarcane Tank Mixes SAN 845H may be tank mixed with other products regis- tered for use in sugarcane such as Asulox®, atrazine, Evik®, and 2,4-D. For use in farmstead (noncropland) and sod farms, apply 2 to 24 ounces of SAN 845H per acre to control or suppress growth of many annual, biennial, and some perennial broadleaf weeds commonly found in turf. SAN 845H will also suppress many other listed perennial broadleaf weeds and woody brush and vine species. Refer to Table 2 for rates based on targeted weed or brush species and growth stage. Some weed species will require tank mixes for adequate control. Repeat treatments may be made as needed; however, DO NOT exceed 24 ounces of SAN 845H per acre, per growing season. Apply 30 to 200 gallons of diluted spray per treated acre (3 to 17 quarts of water per 1,000 square feet), depending on density or height of weeds treated and on the type of equipment used. To avoid injury to newly seeded grasses, delay application of SAN 845H until after the second mowing. Furthermore, applying more than 12 ounces of SAN 845H per treated acre may cause noticeable stunting or discoloration of sensitive grass species such as bentgrass, carpetgrass, buffalograss, and St. Augustinegrass. In areas where roots of sensitive plants extend, DO NOT apply more than 3 ounces of SAN 845H per treated acre on coarse-textured (sandy-type) soils, or in excess of 6 ounces per treated acre on fine-textured soils. DO NOT make repeat applications in these areas for 30 days and until previous applications of SAN 845H have been acti- vated in the soil by rain or irrigation. Farmstead Turf (noncropland) and Sod Farms Tank Mixes Apply 3 to 6 ounces of SAN 845H per acre in a tank mix with one of the products in Table 9 at the rates listed. Use the higher rates when treating established weeds. Table 9. Tank Mix Partner Rate Per Acre bromoxynil (Buctril®) 0.375 to 0.5 pound a.i. MCPA 0.5 to 1.5 pounds a.e. MCPP 0.5 to 1.5 pounds a.e. 2,4-D 0.5 to 1.5 pounds a.e. Sugarcane Farmstead Turf (noncropland) and Sod Farms

23 Acquire, Banvel, Basagran SGF, Basagran, Clarity, Clearfield, Frontier, Guardsman, Laddok, Lightning, Marksman, Outlook, Paramount, and Prowl are registered trademarks of BASF. Accent, Ally, Asana, Bladex, Canvas, Express, Extrazine, Finesse, Glean, Harmony, Karmex, and Lexone are regis- tered trademarks of E. I. du Pont de Nemours & Company. Amber, Beacon, Bicep II Magnum, Caparol, Dual II Magnum, Evik, Exceed, Peak, Princep, and Tough are registered trademarks and Dual Magnum is a trademark of Novartis AG. Spirit is a trademark of Novartis Corporation. Buctril is a registered trademark of Rhône-Poulenc Ag Company. Asulox is a registered trademark of Rhône-Poulenc Agriculture Ltd. Bronate is a registered trademark of Rhône-Poulenc Agrochemie. Sencor is a registered trademark of Bayer AG. Crossbow, Curtail, FirstRate, Garlon, Lorsban, Stinger, and Tordon are registered trademarks and Hornet is a trademark of Dow AgroSciences LLC. Bronco, Bullet, Fallow Master, Harness, Landmaster, Lariat, Lasso, Partner, Ramrod, Roundup Ultra, and Roundup Ready are registered trademarks and Degree, Degree Xtra, and Field Master are trademarks of Monsanto Company. Ambush, Cyclone, DoublePlay, Eradicane, Gramoxone, Surpass, Sutan, Touchdown, and Warrior are registered trademarks and FulTime, and Topnotch and Touchdown are trademarks of Zeneca Inc. and Gramoxone is a registered trademark of Zeneca Ltd. Dakota is a registered trademark of AgrEvo USA Company. Liberty, LibertyLink and Tiller are registered trademarks of Hoechst Schering AgrEvo GmbH. Kerb is a registered trademark of Rohm and Haas Company. Select is a registered trademark of Valent U.S.A. Corporation. Permitis a registered trademark of Nissan Chemical Industries, Ltd. Furadan and Pounce are registered trademarks of FMC Corp. Axiom is a registered trademark of Bayer Corporation. Moxy is a trademark of Riverside. Turbo TeeJet and Turbo FloodJet are registered trademarks of Spraying Systems, Inc. Delavan is a registered trademark of Garlock International, Inc. © 2015 BASF Corporation All rights reserved. 007969-00140.20141204c. NVA 2014-04-193-0294 Supersedes: NVA 2014-04-193-0212 BASF Corporation 26 Davis Drive Research Triangle Park, NC 27709 Conditions of Sale and Warranty The Directions For Use of this product reflect the opinion of experts based on field use and tests. The directions are believed to be reliable and must be followed carefully. However, it is impossible to eliminate all risks inherently associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences may result because of such factors as weather conditions, presence of other materials, or use of the product in a manner inconsistent with its labeling, all of which are beyond the control of BASF CORPORATION (“BASF”) or the Seller. To the extent consistent with applicable law, all such risks shall be assumed by the Buyer. BASF warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes referred to in the Directions For Use, subject to the inherent risks, referred to above. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BASF MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS OR MERCHANTABILITY OR ANY OTHER EXPRESS OR IMPLIED WARRANTY. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BUYER’ S EXCLUSIVE REMEDY AND BASF’ S EXCLUSIVE LIABILITY, WHETHER IN CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY, OR OTHERWISE, SHALL BE LIMITED TO REP AYMENT OF THE PURCHASE PRICE OF THE PRODUCT. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BASF AND THE SELLER DISCLAIM ANY LIABILITY FOR CONSEQUENTIAL, EXEMPLARY, SPECIAL OR INDIRECT DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT. BASF and the Seller offer this product, and the Buyer and User accept it, subject to the foregoing Conditions of Sale and Warranty which may be varied only by agreement in writing signed by a duly authorized representative of BASF. 1108