crop-chem-docs/corpus/epa_ppls/7969-175.md

CELEBRITY PLUS HERBICIDE

• EPA Reg No: 7969-175
• Registrant: BASF AGRICULTURAL SOLUTIONS US, LLC
• Signal word: Caution
• Active ingredients: Diflufenzopyr-sodium (18.1%); Dicamba, sodium salt (46.6%); Nicosulfuron (10.6%)
• Label accepted: 2021-04-30
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/007969-00175-20210430.pdf

---

UNITED STATES ENVIRONMENTAL PROTECTION AGENCY WASHINGTON, DC 20460

Reg Review Label Acceptable v.20151230 OFFICE OF CHEMICAL SAFETY AND POLLUTION PREVENTION April 30, 2021

Jeffrey H. Birk, PhD. Regulatory Manager BASF 26 Davis Drive Research Triangle Park, NC 27709

Subject: Registration Review Label Mitigation for Nico sulfuron and Diflufenzopyr Product Name: CELEBRITY PLUS HERBICIDE EPA Registration Number: 7969-175 Application Dates: February 16, 2018 and May 6, 2019 Decision Numbers: 573344/567977

Dear Dr. Birk:

The Agency, in accordance with the Federal Insecticide, Fungicide and Rodenticide Act (FIFRA), as amended, has completed reviewing all the information submitted with your application to support the Registration Review of the above referenced product in connection with the Sulfonylurea (SU) Herbicides and Diflufenzopyr Interim Decisions, and has concluded that your submission is acceptable. The label referred to above, submitted in connection with registration under FIFRA, as amended, is acceptable.

Should you wish to add/retain a reference to the company’s website on your label, then please be aware that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims made on the website may not substantially differ from those claims approved through the registration process. Therefore, should the Agency find or if it is brought to our attention that a website contains false or misleading statements or claims substantially differing from the EPA approved registration, the website will be referred to the EPA’s Office of Enforcement and Compliance.

A copy of your label stamped “Accepted” is enclosed. Products shipped after 12 months from the date of this amendment must bear the new revised label. Your release for shipment of the product bearing the amended label constitutes acceptance of these conditions. If these conditions are not complied with, the registration will be subject to cancellation in accordance with FIFRA section 6.

Page 2 of 2 EPA Reg. No. 7969-175 Decision No. 573344/567977

Reg Review Label Acceptable v.20151230 If you have any questions about this letter, please contact Marisa Wright by phone at (703) 347- 0463, or via email at wright.marisa@epa.gov.

S i n c e r e l y ,

Linda Arrington, Branch Chief Risk Management and Implementation Branch 4 Pesticide Re-Evaluation Division Office of Pesticide Programs

Enclosure

For use on Field Corn and Popcorn. Active Ingredients: Sodium salt of dicamba* (3,6, dichloro-o-anisic acid)...................... 46.6% Sodium salt of diflufenzopyr* ........................................ 18.1% Nicosulfuron: 2-(( (( (4,6-Dimethoxypyrimidin-2-yl)aminocarbonyl)) aminosulfonyl))-N, N-dimethyl-3-pyridinecarboxamide ..................... 10.6% Other Ingredients: .............................................. 24.7% Total: ......................................................... 100.0%

• Formulated as a dry, Water Dispersible Granule (WDG). This product contains 42.4% of 3,6 dichloro-o-anisic acid (dicamba), 17.0% of 2-(1-[([3,5 difluorophenylamino] carbonyl)- hydrazono] ethyl]-3-pyridinecarboxylic acid (diflufenzopyr) and 10.6% Nicosulfuron by weight. EPA Reg. No. 7969-175 EPA Est. No. KEEP OUT OF REACH OF CHILDREN. CAUTION/PRECAUCION See inside booklet for complete First Aid, Precautionary Statements, Directions For Use, and Conditions of Sale and Warranty. Net Contents: BASF Corporation 26 Davis Drive, Research Triangle Park, NC 27709 Dicamba Group 4 Herbicide Diflufenzopyr Group 19 Herbicide Nicosulfuron Group 2 Herbicide Apr 30, 2021 7969-175

2 Precautionary Statements Hazards to Humans and Domestic Animals CAUTION. Harmful if swallowed. Harmful if absorbed through skin. Causes moderate eye irritation. Avoid con- tact with eyes, skin, or clothing. Prolonged or frequently repeated skin contact may cause allergic reaction in some individuals. Personal Protective Equipment (PPE) All mixers, loaders, and applicators and other handlers must wear: • Long-sleeved shirt and long pants • Chemical-resistant gloves made of any waterproof material such as polyethylene or polyvinyl chloride (except pilots) • Shoes plus socks See engineering controls for additional requirements and exceptions. Follow the manufacturer’s instructions for cleaning and maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry. Engineering Controls Statement When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS. Pilots must use cockpits in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides (40 CFR 170.240(d)(4-6). User Safety Recommendations Users should: • Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet. • Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. • Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing. Environmental Hazards DO NOT apply directly to water or to areas where surface water is present or to intertidal areas below the mean high water mark. DO NOT contaminate water when disposing of equipment washwater or rinsate. DO NOT apply where/ when conditions could favor runoff. Groundwater Advisory Statement: Nicosulfuron is known to leach through soil into groundwater under cer- tain conditions as a result of label use. This chemical may leach into groundwater if used in areas where soils are permeable, particularly where the water table is shallow. Surface Water Advisory Statement: This product may impact surface water quality due to runoff of rain water. This is especially true for poorly draining soils and soils with shallow ground water. This product is classified as having high potential for reaching surface water via runoff for several months or more after application. A level, well-maintained vegetative buffer strip between areas to which this product is applied and surface water features such as ponds, streams, and springs will reduce the potential loading of nicosulfuron from runoff water and sediment. Runoff of this product will be greatly reduced by avoiding applications when rainfall or irrigation is expected to occur within 48 hours. FIRST AID If swallowed • Call a poison control center or doctor immediately for treatment advice. • Have person sip a glass of water if able to swallow. • DO NOT induce vomiting unless told to do so by a poison control center or doctor. • DO NOT give anything by mouth to an unconscious person. If on skin or clothing • Take off contaminated clothing. • Rinse skin immediately with plenty of water for 15-20 minutes. • Call a poison control center or doctor for treatment advice. If in eyes • Hold eye open and rinse slowly and gently with water for 15-20 minutes. • Remove contact lenses, if present, after first 5 minutes, then continue rinsing eye. • Call a poison control center or doctor for treatment advice. HOT LINE NUMBER Have the product container or label with you when calling a poison control center or doctor or going for treatment. You may also contact BASF Corporation for emergency medical treatment information: 1-800-832-HELP (4357).

3 Ground and Surface Water Protection Point source contamination: To prevent point source contamination, DO NOT mix, load this pesticide product within 50 feet of wells (including abandoned wells and drainage wells), sink holes, perennial or intermittent streams and rivers, and natural or impounded lakes and reservoirs. DO NOT apply pesticide product within 50 feet of wells. This setback does not apply to properly capped or plugged abandoned wells and does not apply to imper- vious pad or properly diked mixing/loading areas as described below. Environmental Hazards - Ground and Surface Water Protection (continued): Mixing, loading, rinsing, or washing operations performed within 50 feet of a well are allowed only when conducted on an impervious pad constructed to withstand the weight of the heaviest load that may be on or move across the pad. The pad must be self-contained to prevent surface water flow over or from the pad. The pad capacity must be maintained at 110% that of the largest pesticide container or application equipment used on the pad and have sufficient capacity to contain all prod- uct spills, equipment or container leaks, equipment wash waters, and rain-water that may fall on the pad. The con- tainment capacity does not apply to vehicles delivering pesticide shipments to the mixing/loading site. States may have in effect additional requirements regarding wellhead setbacks and operational containment. Care must be taken when using this product to prevent: a) back siphoning into wells, b) spills or c) improper dispos- al of excess pesticide, spray mixtures or rinsates. Check valves or antisiphoning devices must be used on all mixing equipment. Movement by surface runoff or through soil: DO NOT apply under conditions which favor runoff. DO NOT apply to impervious substrates such as paved or highly compacted surfaces in areas with high potential for ground water contamination. Ground water contamination may occur in areas where soils are permeable or coarse and ground water is near the surface. DO NOT apply to soils classified as sand with less than 3% organic matter and where ground water depth is shallow. To minimize the possibility of ground water contamination, carefully follow application rate recommendations. Movement by water erosion of treated soil: DO NOT apply or incorporate this product through any type of irri- gation equipment nor by flood or furrow irrigation. Ensure treated areas have received at least one-half inch rainfall (or irrigation) before using tailwater for subsequent irriga- tion of other fields. Windblown Soil Particles: Celebrity ® Plus herbicide has the potential to move off-site due to wind erosion. Soils that are subject to wind erosion usually have a high silt and/or fine to very fine sand fractions and low organic mat- ter content. Other factors which can affects the movement of windblown soil include the intensity and direction of pre- vailing winds, vegetative cover, site slope, rainfall, and drainage patterns. Avoid applying Celebrity Plus if pre- vailing local conditions may be expected to result in off-site movement. Non-target Organism Advisory Statement: This prod- uct is toxic to plants and may adversely impact the forage and habitat of non-target organisms, including pollinators, in areas adjacent to the treated site. Protect the forage and habitat of non-target organisms by following label direc- tions intended to minimize spray drift. Endangered Species Concerns The use of any pesticide in a manner that may kill or other- wise harm an endangered species or adversely modify their habitat is a violation of federal law. Directions For Use It is a violation of federal law to use this product in a man- ner inconsistent with its labeling. DO NOT apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during applica- tion. For any requirements specific to your state or tribe, consult the agency responsible for pesticide regulation. Unless otherwise directed in supplemental labeling, all applicable directions, restrictions, precautions and Conditions of Sale and Warranty are to be followed. This labeling must be in the user’s possession during application. Agricultural Use Requirements Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE), and restricted-entry interval. The requirements in this box only apply to uses of this prod- uct that are covered by the Worker Protection Standard. DO NOT enter or allow worker entry into treated areas during the restricted entry interval (REI) of 24 hours. PPE required for early entry to treated areas that is per- mitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is: • coveralls worn over short-sleeve shirt and short pants • chemical-resistant footwear plus socks • chemical-resistant gloves made of any waterproof material • chemical-resistant headgear for overhead exposure • protective eyewear

4 Storage and Disposal DO NOT contaminate water, food, or feed by storage or disposal. Pesticide Storage: Store product in the original con- tainer only. Store in a cool, dry place. Pesticide Disposal: Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility. Improper disposal of excess pesticide, spray mix, or rinsate is a violation of federal law. If these wastes cannot be disposed of according to label instructions, contact the state agency responsible for pesticide regulation or the Hazardous Waste representative at the nearest EPA Regional Office for guidance. Container Disposal: Nonrefillable Container. DO NOT reuse or refill this container. Triple rinse or pressure rinse container (or equivalent) promptly after emptying; then offer for recy- cling, if available, or reconditioning, if appropriate, or puncture and dispose of in a sanitary landfill, or by incin- eration, or by other procedures approved by state and local authorities. Triple rinse containers small enough to shake (capacity ≤ 50 pounds) as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank, or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Pressure rinse as follows: Empty the remaining con- tents into application equipment or mix tank. Hold container upside down over application equipment or mix tank, or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the contain- er and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. In Case of Emergency In case of large-scale spillage regarding this product, call: CHEMTREC 1-800-424-9300 BASF Corporation 1-800-832-HELP (4357) In case of medical emergency regarding this product, call: • Your local doctor for immediate treatment. • Your local poison control center (hospital). • BASF Corporation (1-800-832-HELP) (4357). Steps to be taken in case material is released or spilled: Dike and contain the spill with inert material (sand, earth, etc.) and transfer liquid and solid diking material to sepa- rate containers for disposal. Keep the spill out of all sewers and open bodies of water. I. Product Information Celebrity ® Plus herbicide is intended for postemer- gence control of a wide spectrum of broadleaf weeds and grasses in field corn including high lysine, waxy, white, or other food-grade corn hybrid’s and popcorn (refer to Table 2. Weeds Controlled). Mode of Action Celebrity Plus is composed of three active ingredients each with a different mode of action. The dicamba compo- nent is a Group 4 (WSSA) herbicide. Herbicides in this group mimic auxin (a plant hormone) resulting in a hor- mone imbalance in sensitive plants that interferes with normal plant growth (e.g. cell division, cell enlargement, and protein synthesis). The nicosulfuron (Group 19) com- ponent inhibits acetolactate synthase which is a key enzyme in the biosynthesis of branched-chain amino acids and is the primary component for grass control. The diflufenzopyr (Group 2) component is an auxin transport inhibitor and it compliments dicamba which is an auxin antagonist. Together, these are the primary modes of action for broadleaf weed control. Weed Resistance Management While weed resistance to herbicides is infrequent, popula- tions of resistant biotypes are known to exist. Resistance management should be part of a diversified weed control strategy that integrates multiple options including chemi- cal, cultural, and mechanical (tillage) control tactics. Cultural control tactics include crop rotation, proper fertiliz- er placement, optimum seeding rate/row spacing, and timely tillage. To aid in the prevention of developing weeds resistant to this product, follow these steps where practical: • Start clean with tillage or an effective burndown herbi- cide program. • DO NOT rely on a single herbicide site of action for weed control during the growing season. • Scout fields before application to ensure herbicides and rates will be appropriate for the weed species and weed sizes present. • Apply full labeled rates of Celebrity Plus for the most difficult-to-control weed in the field at the specified time (correct weed size) to minimize weed escapes. • Use of preemergence herbicides that provide soil residu- al control of broadleaf and grass weeds is recommended to reduce early season weed competition and allow for more timely in-crop postemergence herbicide applications. • Avoid application of herbicides with the same site of action more than twice a season. • Scout fields after application to detect weed escapes or shifts in weed species. • Indicators of possible herbicide resistance include: (1) failure to control a weed species normally controlled by the herbicide at the dose applied, especially if control is achieved on adjacent weeds; (2) a spreading patch of non-controlled plants of a particular weed species;

5 (3) surviving plants mixed with controlled individuals of the same species. • Report any incidence of non-performance of this product against a particular weed species to your BASF retailer, representative. • Any weed population may contain plants naturally resis- tant to Group 2, Group 4, and/or Group 19 herbicides. If resistance is suspected, treat weed escapes with a herbicide having a different mode of action and/or use non-chemical methods to remove escapes, as is practi- cal, with the goal of preventing further seed production. • For more information about weeds that are known to be resistant to dicamba go to www.Resistance- Information.BASF.US. Additionally, follow as many of these herbicide resistance management practices as is practical: • Use a broad spectrum soil-applied herbicide with other modes of action as a foundation in a weed control program. • Utilize sequential applications of effective herbicides with alternative modes of action. • Rotate the use of this product with herbicides having a different mode of action. • Avoid making more than two applications of Celebrity ® Plus herbicide and any other Group 2, Group 4, or Group 19 herbicides within a single growing season unless mixed with another site of action with an overlap- ping spectrum for the difficult-to-control weeds. • Contact your local sales representative, crop advisor, or extension agent for find out if suspected resistant weeds to these sites of action have been found in your region. DO NOT assume that each listed weed is being con- trolled by multiple mechanisms of action. Co-formulated active ingredients are intended to broaden the spectrum of weed control. Some weeds may be controlled by only one of the active ingredients in this product. • Incorporate non-chemical weed control practices, such as mechanical cultivation, crop rotation, cover crops and weed-free crop seeds, as part of an integrated weed control program. • Thoroughly clean plant residues from equipment before and after leaving fields suspected to contain resistant weeds. • Manage weeds in and around fields during and after har- vest to reduce weed seed production. • Contact the local agricultural extension service, BASF representative, ag retailer or crop consultant for further guidance on weed control practices as needed. Cleaning Spray Equipment Clean application equipment thoroughly by using a strong detergent or commercial sprayer cleaner according to the manufacturer’s directions and triple rinsing the equipment before and after applying this product. Crop Tolerance Many crops are highly sensitive to Celebrity Plus . All direct or indirect contact (such as spray drift) with crops other than field corn must be avoided. Corn is generally very tolerant to application of Celebrity Plus. Temporary injury may occur under conditions of crop stress or rapid growth. Crop stress can be caused by drought, poor fertili- ty, other pesticides (i.e., other herbicides) or foliar damage due to hail, wind or insects. Injury can be avoided by agro- nomic practices that promote good crop growth and minimize stress conditions and especially combinations of stress factors. Crop leaning may occur during periods of rapid growth, but is usually temporary and dissipates with- in 7 days without subsequent yield reduction. Corn growing under stress conditions such as drought, poor fertility, or foliar damage due to hail, wind or insects, can exhibit various injury symptoms that may be more pro- nounced if herbicides are applied. Soil Insecticide Interaction Information Before using Celebrity Plus, ensure that it is compatible with any soil insecticides previously applied to the corn crop (refer to use advisories given in Table 1.) Table 1. Use Advisory for Celebrity Plus due to interaction with corn soil insecticides on conventional Field Corn and Popcorn or Imidazolinone Tolerant (IT) hybrid’s. Soil Insecticides Application Method for Soil Insecticide Use Advisory Counter ® 15G All labeled methods DO NOT use Counter® CR In furrow at planting, over row at cultivation DO NOT use Counter® CR T-band or Surface band No Use Limitation Lorsban® All labeled methods No Use Limitation Thimet® All labeled methods No Use Limitation Fortress®, Aztec®, and other non- organophosphates All No Use Limitation Herbicide-Resistant Field Corn Celebrity Plus may be used on fields treated with Counter 15G or Counter CR (applied in-furrow, T- or surface-banded) if the field has been planted with an imidazolinone-resistant (“IR” or “IMR”) hybrid corn such as Pioneer 3377 IR, Pioneer 3180IR, etc.

6 II. Application Instructions For best performance, apply Celebrity ® Plus herbicide to actively growing grass weeds that are within the height ranges specified in Table 2. Refer to Table 2. Weeds Controlled for a list of weed species controlled and best application timing based on weed size. The most effective control will result from making postemergence applications of Celebrity Plus early. Delaying application permits weeds to exceed the maximum size stated and may lead to inadequate control. Applications made to weeds larger than those listed on this label may vary from complete control to suppression. Level of control will depend on the weed species, stage of growth, and environmental conditions. Due to the unplanned nature of rescue applications, choices must be made between the risks that arise from applications made beyond the proper time for Celebrity Plus use, and the effects of season-long weed competition or harvest complications. These choices must balance risks from improperly timed Celebrity Plus use that includes, but are not limited to: • Yield loss due to competition: Research indicates competition from dense infestations of foxtail exceeding 4" tall may reduce corn yields. Applications to foxtail and other annual broadleaf weeds and grasses that exceed the sizes stated on the label increases the risk of yield losses due to prolonged competition with the crop even though control may be acceptable. • Incomplete control of weeds at growth stages beyond labeled size: Applications to weeds that exceed the labeled sizes can result in reduced control. This incomplete control may reduce corn yield. • Incomplete weed control due to herbicide stress: Weeds under stress from previous herbicide applications may not be actively growing and susceptible to Celebrity Plus . This stress may reduce weed control in “rescue” situations. For later-emerging weeds, a second application at the same rate or a timely cultivation may be required. Split applications may be made with a minimum of 15 days between sequential applications of Celebrity Plus. DO NOT exceed 9.4 ounces of Celebrity Plus per treated acre per crop year. Cultivation DO NOT cultivate within 10 days before or 7 days after applying Celebrity Plus . Cultivating 7-14 days after appli- cation may help control suppressed weeds, weeds beyond maximum size at application, or weeds that emerge after applying. Ground Application (Banding) Follow Ground Application (Broadcast) instructions for band applications. When applying Celebrity Plus by banding, determine the amount of herbicide and water volume needed using the following formula: Bandwidth in inches x Broadcast rate per acre

Banding herbicide rate per acreRow width in inches Bandwidth in inches x Broadcast volume per acre

Banding water volume per acreRow width in inches Ground Application Methods and Equipment (Broadcast) Water Volume: Use a minimum of 10 gallons of spray solution per acre. Application Equipment: DO NOT use flood, hollow cone, whirl chamber, or controlled droplet applicator (CDA) nozzles as erratic coverage can result in inconsistent weed control. Refer to the nozzle manufacturer’s directions for recommended position of nozzle in respect to the crop. Table 2. Weeds Controlled Annual and Perennial Grasses: For best performance, apply Celebrity Plus when grasses are actively growing and in the height range indicated for those listed below: Grasses Height Range Grasses Height Range Barnyardgrass Broadleaf Signalgrass Cupgrass , Woolly Foxtail , Bristly , Giant , Green , Yellow Itchgrass Johnsongrass (seedling) Millet , Wild Proso Oats, Wild 2-4"

1-2"

2-4"

2-4" 2-4" 2-4" 2-4" 2-6"

4-12"

1-4" 2-4" Panicum , Browntop , Fall , Texas Ryegrass , Italian Sandbur , Field , Longspine Shattercane Sorghum , Almum Johnsongrass (rhizome) Quackgrass

1-3" 2-4" 1-3"

2-6"

1-3" 1-3" 4-12"

4-12"

8-18" 4-10"

7 Table 2. Weeds Controlled (continued) Annual Broadleaf Weeds: For best performance, apply Celebrity ® Plus herbicide to emerged and actively growing annual broadleaf weeds. For the broadleaf weeds listed below, Celebrity Plus will also control triazine- tolerant or ALS- tolerant biotypes that may have developed: Beggarweed , Florida Buckwheat , Wild Buffalobur Burclover , California Burcucumber Carpetweed Chickweed , Common Clovers (Annual) Cocklebur , Common Croton , Tropic Devil’s Claw Jimsonweed Knotweed Kochia Ladysthumb Lambsquarters , Common Mallow , Common , Venice Marestail Morningglory , Entireleaf , Ivyleaf , Pitted , Smallflower , Tall Mustard , Tansy , Wild , Yellowtops Nightshade , Black , Hairy Pigweed , Prostrate , Redroot , Spiny , Amaranth , Rough , Smooth , Tumble Puncturevine Purslane , Common Ragweed , Common , Giant (Buffaloweed) , Lance-Leaf Rubberweed , Bitter (Bitterweed) Sesbania , Hemp Shepherdspurse Sicklepod Sida , Prickly (Teaweed) Smartweed , Green , Pennsylvania Smellmelon Sowthistle Spikeweed , Common Spanish needles Spurge , Prostrate Sunflower , Common (Wild) , volunteer Thistle , Russian Velvetleaf Waterhemp , Common , Tall Perennial Broadleaf Weeds: Celebrity Plus will also provide top growth suppression when applied as directed to perennial broadleaf weed species listed below. For best performance, apply Celebrity Plus to emerged and actively growing perennial broadleaf weeds. Alfalfa Artichoke, Jerusalem Bindweed , Field , Hedge Chicory Clover , Hop , White Dandelion , Common Dock , Broadleaf (Bitterdock) , curly Dogbane , Hemp Horsenettle , Carolina Knapweed , Spotted Milkweed , Common , Honeyvine , Whorled Nightshade , Silverleaf (White Horsenettle) Plantain , Broadleaf Pokeweed Smartweed , Swamp Sowthistle Thistle , Canada Vetch

8 SPRAY DRIFT Aerial Applications: • DO NOT release spray at a height greater than 10 ft above the vegetative canopy, unless a greater applica- tion height is necessary for pilot safety. • For applications prior to the emergence of crops and target weeds, applicators are required to use a coarse or coarser droplet size (ASABE S572.1). • For all other applications, applicators are required to use a Medium or coarser droplet size (ASABE S572.1). • The boom length must not exceed 65% of the wing- span for airplanes or 75% of the rotor blade diameter for helicopters. • Applicators must use 1/2 swath displacement upwind at the downwind edge of the field. • Nozzles must be oriented so the spray is directed toward the back of the aircraft. • DO NOT apply when wind speeds exceed 10 miles per hour at the application site. • DO NOT apply during temperature inversions. Ground Boom Applications: • Apply with the nozzle height recommended by the manufacturer, but no more than 3 ft above the ground or crop canopy unless making a turf, pasture, or rangeland application, in which case applicators may apply with a nozzle height no more than 4 feet above the ground. • For applications prior to the emergence of crops and target weeds, applicators are required to use a coarse or coarser droplet size (ASABE S572.1). • For all other applications, applicators are required to use a Medium or coarser droplet size (ASABE S572.1). • DO NOT apply when wind speeds exceed 10 miles per hour at the application site. • DO NOT apply during temperature inversions. Boom-less Ground Applications: • Applicators are required to use a medium or coarser droplet size (ASABE S572.1). • DO NOT apply when wind speeds exceed 10 miles per hour at the application site. • DO NOT apply during temperature inversions. Spray Drift Advisories THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT. BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS. Importance of Droplet Size An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide target pest control. While applying larger droplets will reduce spray drift, the potential for drift will be greater if applications are made improperly or under unfavorable environmental conditions. Controlling Droplet Size – Ground Boom • Volume - Increasing the spray volume so that larger droplets are produced will reduce spray drift. Use the highest practical spray volume for the application. If a greater spray volume is needed, consider using a nozzle with a higher flow rate. • Pressure - Use the lowest spray pressure recommend- ed for the nozzle to produce the target spray volume and droplet size. • Spray Nozzle - Use a spray nozzle that is designed for the intended application. Consider using nozzles designed to reduce drift. Controlling Droplet Size – Aircraft • Adjust Nozzles - Follow nozzle manufacturers recom- mendations for setting up nozzles. Generally, to reduce fine droplets, nozzles should be oriented parallel with the airflow in flight. Boom Height – Ground Boom For ground equipment, the boom should remain level with the crop and have minimal bounce. Boom-less Ground Applications Setting the release height at the lowest effective height will help to reduce the potential for spray drift. Handheld Technology Applications Take precautions to minimize spray drift. Release Height – Aircraft Higher release heights increase the potential for spray drift. Shielded Sprayers Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify that the shields are not interfering with the uniform deposition of the spray on the target area. Temperature and Humidity When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation. Temperature Inversions Drift potential is high during a temperature inversion. Tem- perature inversions are characterized by increasing temperature with altitude and are common on nights with limited cloud cover and light to no wind. The presence of an inversion can be indicated by ground fog or by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing. Avoid applica- tions during temperature inversions.

9 Wind Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND CONDITIONS. Environmental Conditions and Biological Activity Good weed control is heightened by warm, moist condi- tions (70°F or more) and adequate soil moisture both before and after application. The degree and duration of control depend on: application rate, weed spectrum, weed size, growing conditions before and after treatment, soil moisture, precipitation, and adjuvants. Stress affects all weeds, but especially weeds such as field sandbur, woolly cupgrass, green and yellow foxtail, and wild proso millet. If weeds are under stress, delay application of Celebrity ® Plus herbicide until the stress passes and weeds begin to grow again. Applications made during or immediately after periods of extreme day/night temperature fluctuations or where day- time temperatures do not exceed 50°F may decrease weed control or increase crop injury. If these conditions exist, delay application until the temperatures warm and both weeds and the crop resume normal growth. Ensure that equipment is set up to avoid applying an excessive rate directly over the rows and onto the corn leaf whorl. Use a minimum of 10 gallons of water per acre for light, scattered weed stands. Under heavy weed pressure, dense crop foliage or moisture stress, increase volume to at least 15 gallons of water per acre. Ground application of Celebrity Plus to dry, dusty fields may reduce weed control in wheel track areas. Poor weed control or crop injury may result from applica- tions made to plants under stress from: • abnormally hot or cold weather • environmental conditions such as drought, water- saturated soils, hail damage, or frost • disease, insect, or nematode injury • prior herbicide, or carryover from a previous year’s herbi- cide application Delay application until stress passes and both weeds and corn resume growth. Severe stress from conditions imme- diately following application may also result in crop injury or poor weed control. As weeds mature, their sensitivity to Celebrity Plus decreases. As grassy weeds become mature (more than 3 tillers), they may be larger than the size listed in Table 2. When conditions exist where weeds are maturing rapidly, apply Celebrity Plus to weeds that are smaller than those listed in Table 2. Susceptible weeds are controlled in 7-21 days. III. Additives Applications of Celebrity Plus must include a nonionic surfactant and an ammonium nitrogen fertilizer. Nonionic Surfactant (NIS) Apply 1-2 quarts of NIS per 100 gallons of spray solution (0.25-0.5% v/v concentration). Use the higher rate in drought conditions to enhance control. At least 50% of the surfactant product must be active NIS. Avoid products that do not accurately define their ingredi- ents. Products must contain only EPA-exempt ingredients (40 CFR 1001). Biodegradable products are encouraged. DO NOT use products that change the pH of the spray tank solution. Ammonium Nitrogen Fertilizer Use 1-2 quarts of a high-quality liquid nitrogen fertilizer (such as 28-0-0) per acre. In place of liquid nitrogen fertiliz- er, 1-2 pounds (or liquid equivalent) of high-quality spray-grade ammonium sulfate (21-0-0) per acre may be applied. DO NOT use liquid nitrogen fertilizers without nonionic surfactant. Liquid nitrogen fertilizers should not be used as the total carrier solution. IV. Mixing Information Additives and/or other pesticides may be mixed in the spray tank with Celebrity Plus using the information in this section. Tank Mix Partners The following herbicides may be tank mixed with Celebrity Plus according to the instructions in section VI. Crop-Specific Information . • Accent ® • atrazine • Distinct ® Read and follow the applicable Restrictions and Limitations and Directions For Use on all products involved in tank mixing. The most restrictive labeling applies to tank mixes. Sequential applications should be made if all target weeds are not at the correct growth stage for treatment at the same time. Refer to section VI. Crop-Specific Information for more details on tank mixes and sequen- tial applications. Mixing with Insecticides Celebrity Plus may also be tank mixed with pyrethroid insecticides such as Asana ® or Pounce®, as well as carbamate insecticides such as Furadan® and Lannate®. Note the tank mix restrictions below for insecticides that are not recommended in tank mixes with Celebrity Plus. Physical incompatibility, reduced weed control, or crop injury may result from mixing Celebrity Plus with other pesticides (fungicides, herbicides, insecticides, or miticides), additives, or fertilizers. BASF does not recom- mend using tank mixes other than those listed on BASF labeling.

10 Tank Mix Restrictions and Limitations • Celebrity ® Plus herbicide should not be tank mixed with foliar- applied organophosphate insecticides such as Lorsban®, malathion, parathion, etc. or Ambush® EC and Warrior® EC formulations, as severe crop injury may occur. • Celebrity Plus should not be tank mixed with emulsifi- able concentrate (EC) formulations of chloroaceteamide grass herbicides (i.e.: Dual II Magnum®, Harness®, Outlook®, Surpass®) as crop injury may occur. • To avoid crop injury or antagonism, apply bentazon- containing herbicides (such as Basagran® or Laddok® S-12), or organophosphate insecticides at least 7 days before or 3 days after applying Celebrity Plus. • If antagonism occurs, complete control can be obtained with either a timely cultivation (see Cultivation) or a sec- ond application of Celebrity Plus (refer to Sequential Applications in section VI. Crop-Specific Information). Compatibility Test for Mix Components Before mixing additives and/or other pesticides, always perform a compatibility jar test. For 20 gallons per acre spray volume, use 3.3 cups (800 ml) of water. For other spray volumes, adjust rates accordingly. Only use water from the intended source at the source temperature. Add components in the sequence indicated in the Mixing Order using 2 teaspoons for each pound or 1 teaspoon for each pint of recommended label rate per acre. Always cap the jar and invert 10 cycles between compo- nent additions. When the components have all been added to the jar, let the solution stand for 15 minutes. Evaluate the solution for uniformity and stability. The spray solution should not have free oil on the surface, nor fine particles that precipitate to the bottom, nor thick (clabbered) texture. If the spray solu- tion is not compatible, repeat the compatibility test with the addition of a suitable compatibility agent. If the solution is then compatible, use the compatibility agent as directed on its label. If the solution is still incompatible, do not mix the ingredients in the same tank. Mixing Order When mixing additives and/or other pesticides in a spray tank, add the products to be used in the following sequence.

1. Water. Begin by agitating a thoroughly clean sprayer tank three-quarters full of clean water.*
2. Agitation. Maintain constant agitation throughout mix- ing and application.
3. Products in PVA bags. Place any product contained in water-soluble PVA bags into the mixing tank. Wait until all water-soluble PVA bags have fully dissolved and the product is evenly mixed in the spray tank before continuing.
4. Water-dispersible products (such as Celebrity Plus dry flowables, wettable powders, suspension concen- trates, or suspo-emulsions).
5. Water-soluble products.
6. Emulsifiable concentrates.
7. Water-soluble additives (such as AMS or UAN when applicable).
8. Remaining quantity of water. Maintain constant agitation during application.

• If the user prefers to fill the spray tank from a nurse tank containing an AMS product dissolved in water, this is acceptable. If this method is used, the AMS product must be totally dissolved before adding Celebrity Plus. Celebrity Plus must be thoroughly dissolved before adding additional products or additives. The user should verify that the AMS pre-mix water alternative is compatible with other tank mix components. V. Restrictions and Limitations • Maximum seasonal use rate: DO NOT apply more than 9.4 ounces of Celebrity Plus (0.41 pounds of active ingredient) per acre, per season. • Sequential Applications: DO NOT apply sequential applications of Banvel®, Clarity ®, Distinct ®, or Marksman® herbicide within 15 days of an application of Celebrity Plus. • DO NOT make more than 2 applications of Celebrity Plus per acre per season. • When using tank mixes or sequential applications:

• The total amount of nicosulfuron (active ingredient) applied cannot exceed 0.67 ounce per acre per appli- cation or 1.0 ounce per acre per season.
• The total amount of dicamba (active ingredient) applied cannot exceed 0.5 pound per acre per application or 0.75 pound per acre per season.
• The total amount of diflufenzopyr (active ingredient) applied cannot exceed 0.1 pound per acre per applica- tion or 0.125 pound per acre per season. • Preharvest Interval: DO NOT apply within 32 days of forage harvest. DO NOT apply within 72 days of corn grain and stover harvest. • Restricted Entry Interval (REI): 24 hours. • Crop Failure: In case of crop failure, only field corn, field corn grown for seed, or popcorn may be replanted. • Stress: Poor weed control or crop injury may result from applying Celebrity Plus to plants under stress due to lack of moisture, hail damage, flooding, herbicide injury, mechanical injury, or widely fluctuating temperatures. • DO NOT apply to crops that show injury (leaf phyto- toxicity or plant stunting) produced by any other prior herbicide applications, because this injury may be enhanced or prolonged. • Rainfastness: For best performance, rainfall or irriga- tion should not occur for 4 hours after application. • DO NOT apply through any type of irrigation equipment. • DO NOT apply Celebrity Plus near desirable trees or other plants, or on areas where their roots may extend, or in locations where the chemical may be washed or moved into contact with their roots.

11 • Prevent drift of spray to desirable plants. • In fields infested with Johnsongrass or fields with a previ- ous history of corn virus, a corn hybrid with a high degree of virus tolerance should be used. Consult your local seed corn representative for information on virus-tolerant hybrids. • DO NOT apply on Long Island in the State of New York. Crop Rotation Guidelines: • Rotational crops vary in their response to low concentra- tions of Celebrity ® Plus herbicide remaining in the soil. (refer to Table 4) Celebrity Plus dissipates rapidly in warm, acidic, microbiologically active soils. • The amount of Celebrity Plus which may be present in the soil depends on application rate, soil pH and organic matter content, elapsed time since application, crop pro- duction practices, and environmental factors. • Injury to rotational crops may occur in high-pH, cold soils if dry weather prevails between application and rotational crop planting. • Soil pH should be determined by laboratory analysis using the 1:1 soil:water suspension method on represen- tative soil samples taken at 0-4" depth. Soil pH varies within fields; therefore, recropping should be based on the highest soil pH within each field. Consult local extension publications for recommended soil sampling procedures. Table 3. Crop-Specific Restrictions and Limitations Crop Minimum Time From Application to Harvest (PHI) Maximum Rate Per Acre Per Application Maximum Rate Per Acre Per Season Livestock Grazing or Feeding Corn , forage , grain or stover 32 days 72 days 4.7 ounces 9.4 ounces not permitted

12 VI. Crop-Specific Information Field Corn Celebrity ® Plus herbicide may be used on field corn (high lysine, waxy, white or other food-grade corn hybrid’s). Apply Celebrity Plus at 4.7 ounces per acre. For best performance, apply Celebrity Plus to actively growing grass weeds that are within the height ranges specified in Table 2. Apply Celebrity Plus when corn is 4 to 24" tall (standing height). It is recommended to apply Celebrity Plus with drop nozzles when corn exceeds 20" tall or has more than 6 leaf collars (V6), whichever is more restrictive. Avoid direct application of spray into the whorl of corn plants. Field Corn Tank Mixes Celebrity Plus + Accent ® Celebrity Plus: 4.7 ounces Accent 75 WG: 0.33-0.67 ounces Tank mixes with Accent may be used for additional con- trol of grasses in adverse conditions or added suppression of grasses past the recommended growth stages at time of application. Use the higher rate indicated for added con- trol of larger weeds. To control difficult annual grasses such as green and yel- low foxtail, wild proso millet and sandbur in the western U.S. and western areas of the corn belt, 0.33 ounce of Accent per acre in addition to Celebrity Plus may be required. Celebrity Plus + Atrazine Celebrity Plus: 4.7 ounces Atrazine 4L: 1-3 pints or Atrazine (i.e. 90 DF): 0.56-1.66 pounds Tank mixes with atrazine may be used for additional foliar or soil-residual weed control. Use the higher rate indicated for extended soil residual control. Apply before corn exceeds the 12" (free standing) stage of growth. Celebrity Plus + Distinct ® Celebrity Plus: 4.7 ounces Distinct: 2 ounces Tank mixes with Distinct may be used for additional con- trol of broadleaf weeds in adverse conditions for added control or suppression of broadleaf weeds past the recom- mended growth stages at the time of application. Apply before corn exceeds the 10" (free standing) stage of growth. Sequential Applications for Field Corn Sequential Applications with Celebrity Plus: Annual broadleaf weeds and grasses may have more than one flush of emerging seedlings. Also, regrowth of treated broadleaf weeds grasses may occur due to adverse environmental conditions following application. Perennial grasses may regrow from underground stems or roots, depending upon environmental conditions. To control these weeds under these conditions, a sequen- tial application of Celebrity Plus may be necessary. The combined dosage of the sequential applications must not exceed 9.4 ounces of Celebrity Plus per acre. Sequential applications of 4.7 ounces of Celebrity Plus per acre must be separated by at least 15 days. Sequential Applications with Other Herbicides: Celebrity Plus may be applied to corn after use of preplant, pre-emergence, or early postemergence herbicides such as: Accent, atrazine, Banvel ®, Bicep II Magnum®, Clarity®, Dual II Magnum®, Outlook®, Guardsman Max®, Harness®, Marksman®, or other herbicides registered for use on corn. A single application of Celebrity Plus may be made after using Banvel (up to 1 pint per acre), Clarity (up to 16 fluid ounces per acre), or Marksman (up to 3.5 pints per acre). Sequential applications with Banvel, Clarity, or Marksman must be separated by at least 15 days. A single application of Celebrity Plus may be made before or after the use of Accent. DO NOT exceed a combined rate of 4.7 ounces of Celebrity Plus and 0.67 ounce of Accent per acre, per season. Before applying Celebrity Plus to popcorn, verify the selectivity of Celebrity Plus on the popcorn hybrid with your local seed company supplier. This precaution will help avoid potential injury to sensitive lines. DO NOT apply Celebrity Plus to any white popcorn inbred or white popcorn hybrid unless specifically approved by the seed company. This includes “White Dynamite” popcorn. Not all popcorn hybrid’s have been tested, nor does BASF have access to all data. Consequently, BASF is not responsible for any crop injury arising from the use of Celebrity Plus on popcorn. Celebrity Plus may be broadcast applied to popcorn that is 4" to 20" tall (free standing) or that exhibits up to and including 5" leaf-collars (V5), whichever is most restrictive. Apply Celebrity Plus at 4.7 ounces per acre. For best performance, apply Celebrity Plus to actively growing weeds that are within the height ranges specified in Table 2. DO NOT apply to popcorn that is taller than 20" or that exhibits more than 5 leaf collars (V5), whichever is more restrictive. Avoid direct application of spray into the whorl of popcorn plants. For applications to popcorn, DO NOT tank mix any dicam- ba, 2,4-D, primisulfuron methyl or nicosulfuron containing products with Celebrity Plus. When tank mixing with other products, check the tank mix partner label for toler- ances and instructions for use. DO NOT apply Celebrity Plus to popcorn showing signs of stress, whether caused b adverse conditions or previ- ous herbicide applications.

13 Table 4. Rotational Crop Intervals The following rotational intervals should be observed when using Celebrity ® Plus herbicide: Rotational Crop Interval No soil pH restrictions Corn (Field, Seed) Corn (Pop, Sweet) 1 Soybeans Wheat (Winter) Wheat (Spring) Barley (Winter) Barley (Spring) Rye (Winter) Dry Beans Oats Cotton Peas, Snap Beans Alfalfa 2 Red Clover2 Other Crops 1 week 10 months 4 months 4 months 8 months 4 months 8 months 4 months 10 months 8 months 10 months 10 months 12 months 12 months See rotational crop guidelines below with soil pH 7.5 restrictions pH ≤ 7.5 pH > 7.5 Sorghum Sunflowers 10 months 11 months 4 18 months3 18 months with soil pH 6.5 restrictions pH ≤ 6.5 pH > 6.5 Sugar beets5 All other crops not listed. 10 months 10 months 18 months6 18 months6 1 Except the sweet corn varieties “Merit”, “Carnival”, and “Sweet Success”, for which the minimum time interval is 15 months. 2 Except for the state of Kansas east of Highway 75, for Minnesota east and south of the Red River Valley and for the states east of the line formed by the western borders of Iowa, Missouri, Arkansas, and Louisiana, where the minimum time interval is 10 months. 3 Except in Texas and Oklahoma east of highway 281, where the rotational interval is 10 months, regardless of pH. 4 Precipitation following application must exceed 14" prior to planting sunflowers. 5 Except on irrigated sites in Colorado, Wyoming, Nebraska, Texas, or in Michigan where precipitation following application must exceed 25" prior to planting beets, where the interval is 10 months on soils with pH < 7.5. 6 In North Dakota and northwest Minnesota, the cumulative precipitation in the 18 months following application must exceed 28" in order to rotate to sugar beets or potatoes.

14 Broadleaf weeds listed in this label: Common Name Alfalfa Artichoke, Jerusalem Beggarweed, Florida Bindweed , Field , Hedge Buckwheat, Wild Buffalobur Burclover, California Burcucumber Carpetweed Chickweed, Common Chicory Clover, Hop Clovers (Annual) Cocklebur, Common Croton, Tropic Dandelion, Common Devil’s Claw Dock , Broadleaf (Bitterdock) , Curly Dogbane, Hemp Horsenettle, Carolina Jimsonweed Knapweed, Spotted Knotweed Kochia Ladysthumb Lambsquarters, Common Mallow , Common , Venice Marestail Milkweed , Common , Honeyvine , Whorled (Eastern) , Whorled (Western) Morningglory , Entireleaf , Ivyleaf , Pitted , Smallflower , Tall Mustard , Tansy , Wild , Yellowtops Nightshade , Black , Hairy Nightshade, Silverleaf (White Horsenettle) Pigweed , Palmer , Prostrate , Redroot (Carelessweed) , Smooth , Spiny , Tumble Plantain, Broadleaf Pokeweed Puncturevine Scientific Name Medicago sativa Helianthus tuberosus Desmodium tortuosum Convolvulus arvensis Convolvulus sepium Polygonum convolvulus Solanum rostratum Medicago polymorpha Sicyos angulatus Mollugo verticillata Stellaria media Cichorium intybus Trifolium aureum Trifolium sp. Xanthium strumarium Croton glandulosus Taraxacum officinale Proboscidea louisianica Rumex obtusuifolium Rumex crispus Apocynum cannabinum Solanum carolinense Datura stramonium Centaurea maculosa Polygonum sp. Kochia scoparia Polygonum persicaria Chenopodium album Malva neglecta Hibiscus trionum Hippurus vulgaris Asclepias syriaca Ampelamus albidus Asclepias verticillata Asclepias subverticillata Ipomoea hederacea Ipomoea hederacea Opomoea Iacunosa Jacquemontia tamnifolia Ipomoea purpurea Brassica kaber Ampelamus albidus Ascelepius subverticillata Solanum nigrum Solanum sarrachoides Solanum elaeagnifolium — Amaranthus palmeri Amaranthus blitoides Amaranthus retroflexus — Amaranthus hybridus Amaranthus spinosus Amaranthus albus Plantago major Phytolacca americana Tribulus terrestrius

15 Broadleaf weeds listed in this label: (continued) Common Name Purslane, Common Ragweed , Common , Giant (Buffaloweed) , Lance-Leaf Rubberweed, Bitter (Bitterweed) Sesbania, Hemp Shepherdspurse Sicklepod Sida, Prickly (Teaweed) Smartweed , Green , Pennsylvania , Swamp Smellmelon Sowthistle , Annual , Perennial Spikeweed, Common Spanish needles Spurge, Prostrate Sunflower , Common (Wild) , volunteer Thistle, Canada Thistle, Russian Velvetleaf Vetch Waterhemp , Common , Tall Scientific Name Portulaca oleracea Ambrosia artemisifolia Ambrosia trifida Ambrosia bidentata Hymenoxys odorata — Sesbania exaltata Capsella bursa-pastoris Cassia obtusifolia Sida spinosa Polygonum lapathifolium Polygonum pensylvanicum Polygonum coccineum Cucumis melo Sonchus oleraceus Sonchus arvensis Hemizonia pungens Bidens pinnata Euphorbia supina Helianthus annuus Helianthus sp. Cirsium arvense Salsola iberica Abutilon theophrastic Vicia sp. Amaranthus rudis Amaranthus tuberculatus Grasses listed in this label: Common Name Barnyardgrass Cupgrass, Woolly Foxtail , Bristly , Giant , Green , Yellow Itchgrass Johnsongrass (seedling) Johnsongrass (rhizome) Millet, Wild Proso Oats, Wild Panicum , Browntop , Fall , Texas Quackgrass Ryegrass, Italian Sandbur , Field , Longspine Shattercane Signalgrass, Broadleaf Sorghum Almum Scientific Name Echinochloa crus-galli Echinochloa villosa Setaria verticillata Setaria faberi Setaria viridis Setaria lutescens Rottboellia exaltata Sorghum halepense Sorghum halepense Panicum miliaceum Avena sativa Panicum fasciculatum Panicum dichotomiflorum Panicum texanum Agropyron repens Lolium multiflorum Cenchrus incertus Cenchrus longispinus Sorghum bicolor Brachiaria platyphylla Sorghum almum Parod. Crops: This product can be used on the following crops: Field Corn, Popcorn Look inside for complete Restrictions and Limitations and Application Instructions .

16 Conditions of Sale and Warranty The Directions For Use of this product reflect the opinion of experts based on field use and tests. The directions are believed to be reliable and must be followed carefully. However, it is impossible to eliminate all risks inherently associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences may result because of such factors as weather conditions, presence of other materials, or use of the product in a manner inconsistent with its labeling, all of which are beyond the control of BASF CORPORATION (“BASF”) or the Seller. To the extent consistent with applicable law, all such risks shall be assumed by the Buyer. BASF warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes referred to in the Directions For Use , subject to the inherent risks, referred to above. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BASF MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS OR MERCHANTABILITY OR ANY OTHER EXPRESS OR IMPLIED WARRANTY. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BUYER’S EXCLUSIVE REMEDY AND BASF’S EXCLUSIVE LIABILITY, WHETHER IN CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY, OR OTHERWISE, SHALL BE LIMITED TO REPAYMENT OF THE PURCHASE PRICE OF THE PRODUCT. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BASF AND THE SELLER DISCLAIM ANY LIABILITY FOR CONSEQUENTIAL, EXEMPLARY, SPECIAL OR INDIRECT DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT. BASF and the Seller offer this product, and the Buyer and User accept it, subject to the foregoing Conditions of Sale and Warranty which may be varied only by agreement in writing signed by a duly authorized representative of BASF. 1108 © 2021 BASF Corporation All rights reserved. 007969-00175.20190506d.NVA 2019-04-084-0082 Supersedes: NVA 2018-04-084-0020 BASF Corporation 26 Davis Drive Research Triangle Park, NC 27709 Banvel, Basagran, Celebrity, Clarity, Counter, Distinct, Laddok, Marksman, Outlook, and Thimet are registered trademarks of BASF Corporation. Accent, Asana, Fortress, and Lannate are registered trademarks of E.I. DuPont de Nemours & Co., Inc. Ambush, Surpass, and Warrior are registered trademarks of Zeneca, Inc. Aztec is a registered trademark of Bayer Corporation. Bicep II Magnum and Dual II Magnum are registered trademarks of Syngenta. Furadan and Pounce are registered trademarks of FMC Corporation. Harness is a registered trademark of Monsanto Company. Lorsban is a registered trademark of Dow AgroSciences.