crop-chem-docs/corpus/epa_ppls/7969-479.md

EVERDANT HERBICIDE

• EPA Reg No: 7969-479
• Registrant: BASF AGRICULTURAL SOLUTIONS US, LLC
• Signal word: Caution
• Active ingredients: Dicamba (60.8%)
• Label accepted: 2024-02-13
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/007969-00479-20240213.pdf

---

1

February 13, 2024

Jeffrey H. Birk Regulatory Manager BASF 26 Davis Drive Research Triangle Park, NC 27709

Subject: Notification per PRN 98- 10 – Change to Primary Brand Name Product Name: Everdant Herbicide EPA Registration Number: 7969-479 Application Da te: September 11, 2023 Decision Number: 595077

Dear Jeffrey H. Birk:

The Agency is in receipt of your Application for Pesticide Notification under Pesticide Registration Notice (PRN) 98-10 for the above referenced product. The Registration Division (RD) has conducted a review of this request for its applicability under PRN 98-10 and finds that the action requested falls within the scope of PRN 98-10.

The label submitted with the application has been stamped “NOTIFICATION” and placed in our records.

The product record has been updated to reflect the primary brand name is now “Everdant Herbicide”.

Should you wish to add/retain a reference to the company’s website on your label, then please be aware that the website becomes labeling under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA) and is subject to review by the Agency. If the website is false or misleading, the product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) lists examples of statements EPA may consider false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims made on the website may not substantially differ from those claims approved through the registration process. Therefore, should the Agency find or if it is brought to our attention that a website contains false or misleading statements or claims substantially differing from the EPA approved registration, the website will be referred to the EPA’s Office of Enforcement and Compliance.

Page 2 of 2 EPA Reg. No. 7969-479 Decision No. 595077

If you have any questions, please contact Emily Schmid by phone at 202-566-2893, or via email at schmid.emily@epa.gov.

Sincerely,

Emily Schmid, Product Manager 25 Herbicide Branch Registration Division (7505P) Office of Pesticide Programs

For weed control in asparagus; conservation reserve programs (CRP); corn; cotton; fallow cropland; farmstead turf (noncropland) and sod farms; grass grown for seed; pasture, hay, rangeland, and farmstead (noncropland); proso millet; small grain; sorghum; soybean; and sugarcane NOT FOR USE ON DICAMBA TOLERANT (DT) CROPS Active Ingredient*: dicamba: N,N-Bis-(3-aminopropyl)methylamine salt of 3,6- dichloro-o-anisic acid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 .8% Other Ingredients: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 .2% Total: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 .0%

• Contains 48 .38% dicamba (5 pounds acid equivalent per gallon or 600 grams per liter) EPA Reg. No. 7969-479 EPA Est. No. KEEP OUT OF REACH OF CHILDREN CAUTION/PRECAUCION Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle . (If you do not understand the label, find someone to explain it to you in detail .) See full label for complete First Aid, Precautionary Statements, Directions For Use, Conditions of Sale and Warranty, and state-specific crop and/or use site restrictions . In case of an emergency endangering life or property involving this product, call day or night 1-800-832-HELP (4357). Net Contents: BASF Corporation 26 Davis Drive, Research Triangle Park, NC 27709 Dicamba Group 4 Herbicide 7969-479 2/13/2024

2 Precautionary Statements Hazards to Humans and Domestic Animals CAUTION. Harmful if swallowed or inhaled . Avoid breath- ing vapor or spray mist . Remove and wash contaminated clothing before reuse . Wash hands thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco, or using the toilet . Prolonged or frequently repeated skin contact may cause allergic reactions in some individuals . Personal Protective Equipment (PPE) All mixers, loaders, applicators, and other handlers must wear: • Long-sleeved shirt and long pants • Shoes plus socks • Waterproof gloves • A NIOSH-approved dust/mist filtering respirator with any R, P, or HE filter . Examples include a filtering facepiece respirator with approval number prefix TC-84A and an R or P designation, or a full-face or half-mask respirator with R, P, or HE cartridges . See Engineering Controls for additional requirements . Follow the manufacturer’s instructions for cleaning and maintaining PPE . If no such instructions for washables exist, use detergent and hot water . Keep and wash PPE separately from other laundry . Engineering Controls When handlers use closed systems or enclosed cabs in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170 .240(d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS . USER SAFETY RECOMMENDATIONS Users should: • Wash hands after handling and before eating, drinking, chewing gum, using tobacco, or using the toilet . • Remove clothing/PPE immediately if pesticide gets inside . Then wash thoroughly and put on clean clothing . • Remove PPE immediately after handling this product . Wash the outside of gloves before removing . As soon as possible, wash thoroughly and change into clean clothing . Environmental Hazards DO NOT apply directly to water, or to areas where surface water is present, or to intertidal areas below the mean high water mark . DO NOT contaminate water when disposing of equipment washwater or rinsate . Apply this product only as directed on the label . This chemical is known to leach through soil into ground - water under certain conditions as a result of agricultural use . Use of this chemical in areas where soils are perme- able, particularly where the water table is shallow, may result in groundwater contamination . Ground and Surface Water Protection Point-source Contamination To prevent point-source contamination, DO NOT mix or load this pesticide product within 50 feet of wells (including abandoned wells and drainage wells), sinkholes, perennial or intermittent streams and rivers, and natural or impound - ed lakes and reservoirs . DO NOT apply pesticide product within 50 feet of wells . This setback does not apply to properly capped or plugged abandoned wells and does not apply to impervious pad or properly diked mixing/ loading areas as described below . Mixing, loading, rinsing, or washing operations performed within 50 feet of a well are allowed only when conducted on an impervious pad constructed to withstand the weight of the heaviest load that may be on or move across the pad . The pad must be self-contained to prevent surface water flow over or from the pad . The pad capacity must be maintained at 110% that of the largest pesticide container FIRST AID If swallowed • Call a poison control center or doctor immediately for treatment advice . • Have person sip a glass of water if able to swallow . • DO NOT induce vomiting unless told to do so by a poison control center or doctor . • DO NOT give anything by mouth to an unconscious person . If inhaled • Move person to fresh air . • If person is not breathing, call 911 or an ambulance; then give artificial respiration, preferably by mouth to mouth, if possible . • Call a poison control center or doctor for further treatment advice . HOTLINE NUMBER Have the product container or label with you when calling a poison control center or doctor or going for treatment . You may also contact BASF Corporation for emergency medical treatment information: 1-800-832-HELP (4357) .

3 or application equipment used on the pad and have suffi - cient capacity to contain all product spills, equipment or container leaks, equipment washwater, and rainwater that may fall on the pad . The containment capacity does not apply to vehicles delivering pesticide shipments to the mixing/loading site . States may have in effect additional requirements regarding wellhead setbacks and operational containment . Care must be taken when using this product to prevent: • Back-siphoning into wells • Spills • Improper disposal of excess pesticide, spray mixtures, or rinsate Check valves or antisiphoning devices must be used on all mixing equipment . Movement by Surface Runoff or Through Soil DO NOT apply under conditions which favor runoff . DO NOT apply if soil is saturated with water or when rain- fall that may exceed soil field capacity is forecast to occur within 48 hours . Under some conditions, dicamba has the potential for runoff several days after application . Poorly draining, wet, or erodible soils with readily visible slopes toward adjacent sensitive areas are more prone to pro- duce runoff . When used on erodible soils, best management practices for minimizing runoff should be employed . Consult your local Soil Conservation Service for recommendations in your use area . DO NOT apply to impervious substrates such as paved or highly compacted surfaces in areas with high potential for groundwater contamination . Groundwater contamination may occur in areas where soils are permeable or coarse and groundwater is near the surface . DO NOT apply to soils classified as sand with less than 3% organic matter and where groundwater depth is shallow . To minimize the possibility of groundwater contamination, carefully follow the specified rates as affected by soil type in the Crop-specific Information section of this label . Movement by Water Erosion of Treated Soil DO NOT apply this product through any type of irrigation system including sprinkler, drip, flood, or furrow irrigation . Ensure treated areas have received at least 1/2-inch rainfall (or irrigation) before using tailwater for subsequent irriga- tion of other fields . Endangered Species It is a federal offense to use any pesticide in a manner that results in the death of an endangered species . The use of any pesticide in a manner that may kill or other- wise harm an endangered species or adversely modify their habitat is a violation of federal law . Directions For Use It is a violation of federal law to use this product in a man- ner inconsistent with its labeling . This labeling must be in the user’s possession during application . DO NOT apply this product in a way that will contact workers or other persons, either directly or through drift . Only protected handlers may be in the area during applica - tion . For any requirements specific to your state or tribe, consult the agency responsible for pesticide regulation . Observe all precautions, restrictions, and limitations in this label and the labels of products used in combination with this product . Keep containers closed to avoid spills and contamination . All applicable directions, restrictions, precautions, and Conditions of Sale and Warranty are to be followed . AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170 . This standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides . It contains requirements for training, decontamination, notification, and emergency assistance . It also contains specific instructions and exceptions pertaining to the statements on this label about Personal Protective Equipment (PPE) and restricted-entry intervals . The requirements in this box only apply to uses of this prod- uct that are covered by the WPS . DO NOT enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 24 hours . PPE required for early entry to treated areas that is per- mitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as, plants, soil, or water is: • Coveralls worn over short-sleeved shirt and short pants • Chemical-resistant footwear plus socks • Waterproof gloves • Chemical-resistant headgear for overhead exposure • Protective eyewear NON-AGRICULTURAL USE REQUIREMENTS The requirements in this box apply to uses of this prod- uct that are NOT within the scope of the Worker Protection Standard for agricultural pesticides (40 CFR Part 170) . The WPS applies when this product is used to produce agricultural plants on farms, forests, nurseries, or greenhouses . DO NOT enter or allow people (or pets) to enter the treated area until sprays have dried . DO NOT apply this product in a way that will contact workers or other persons, either directly or through drift . Only protected handlers may be in the area during application .

4 STORAGE AND DISPOSAL DO NOT contaminate water, food, or feed by storage or disposal . Open dumping is prohibited . Pesticide Storage Store in original container in a well-ventilated area sepa- rately from fertilizer, feed, and foodstuffs . Avoid cross-contamination with other pesticides . EverdantTM herbicide freezes around 15° F and is stable under con- ditions of freezing and thawing . Product that has been frozen should be thawed and recirculated prior to use . Pesticide Disposal Wastes resulting from this product must be disposed of on-site or at an approved waste disposal facility . Pesti- cide, spray mixture, or rinsate that cannot be used according to label instructions must be disposed of according to federal, state or local procedures under Subtitle C of the Resource Conservation and Recovery Act . Improper disposal of excess pesticide, spray mix, or rinsate is a violation of federal law . Container Handling Nonrefillable Container. DO NOT reuse or refill this container . Triple rinse or pressure rinse container (or equivalent) promptly after emptying; then offer for recy - cling, if available, or reconditioning, if appropriate, or puncture and dispose of in a sanitary landfill, or by incin - eration, or by other procedures approved by state and local authorities . Triple rinse containers small enough to shake (capacity ≤ 5 gallons) as follows: Empty the remain- ing contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip . Fill the container 1/4 full with water and recap . Shake for 10 seconds . Pour rinsate into application equipment or a mix tank, or store rinsate for later use or disposal . Drain for 10 seconds after the flow begins to drip . Repeat this procedure two more times . Triple rinse containers too large to shake (capacity > 5 gallons) as follows: Empty the remain- ing contents into application equipment or a mix tank . Fill the container 1/4 full with water . Replace and tighten clo- sures . Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 sec- onds . Stand the container on its end and tip it back and forth several times . Turn the container over onto its other end and tip it back and forth several times . Empty the rinsate into application equipment or a mix tank, or store rinsate for later use or disposal . Repeat this procedure two more times . (continued) STORAGE AND DISPOSAL (continued) Container Handling (continued) Pressure rinse as follows: Empty the remaining con- tents into application equipment or mix tank and continue to drain for 10 seconds after the flow begins to drip . Hold container upside down over application equipment or mix tank, or collect rinsate for later use or disposal . Insert pressure rinsing nozzle in the side of the container and rinse at about 40 PSI for at least 30 seconds . Drain for 10 seconds after the flow begins to drip . Refillable Container. Refill this container with pesticide only . DO NOT reuse this container for any other purpose . Triple rinsing the container before final disposal is the responsibility of the person disposing of the container . Cleaning before refilling is the responsibility of the refiller . Triple rinse as follows: To clean the container before final disposal, empty the remaining contents from this container into application equipment or mix tank . Fill the container about 10% full with water . Agitate vigorously or recirculate water with the pump for 2 minutes . Pour or pump rinsate into application equipment or rinsate collection system . Repeat this rinsing procedure two more times . When this container is empty, replace the cap and seal all openings that have been opened during use; return the container to the point of purchase or to a designated loca- tion . This container must only be refilled with a pesticide product . Prior to refilling, inspect carefully for damage such as cracks, punctures, abrasions, worn-out threads and closure devices . Check for leaks after refilling and before transport . DO NOT transport if this container is damaged or leaking . If the container is damaged, or leak- ing, or obsolete and not returned to the point of purchase or to a designated location, triple rinse emptied container and offer for recycling, if available, or dispose of container in compliance with state and local regulations . In Case of Emergency In case of large-scale spill of this product, call: • CHEMTREC 1-800-424-9300 • BASF Corporation 1-800-832-HELP (4357) In case of medical emergency regarding this product, call: • Your local doctor for immediate treatment • Your local poison control center (hospital) • BASF Corporation 1-800-832-HELP (4357) Steps to take if material is released or spilled: • Dike and contain the spill with inert material (sand, earth, etc .) and transfer liquid and solid diking material to sepa - rate containers for disposal . • Remove contaminated clothing and wash affected skin areas with soap and water . • Wash clothing before reuse . • Keep the spill out of all sewers and open bodies of water .

5 Product Information EverdantTM herbicide is a water-soluble herbicide that provides postemergence and moderate rate-dependent residual control of many annual broadleaf weeds . Everdant is also active on many biennial and perennial broadleaf weeds as well as woody brush and vines (refer to Table 1 for weeds controlled or suppressed) . Everdant can be used in specific field and row crops, fal - low and postharvest croplands, and sod farms . Everdant does not control grass weeds and must be used sequen - tially or tank mixed with a grass herbicide for a complete weed control program . See Tank Mixing Information section for important information on herbicide tank mixes or Crop-specific Information section(s) for recommen- dations on sequential programs . Additional state restrictions and requirements may apply . The applicator must comply with any additional state requirements and restrictions . Table 1. Weeds Controlled or Suppressed Everdant will control or suppress the following weeds when used at rates described in Table 2 . See additional information about weeds which are known to be resistant to dicamba at www.Resistance-Information.BASF.US . Common Name Scientific Name Annuals Alkanet Lithospermum arvense Amaranth, Palmer Amaranthus palmeri Amaranth, Powell Amaranthus powellii Amaranth, spiny Amaranthus spinosus Aster, slender Aster subulatus Bedstraw, catchweed Galium aparine Beggarweed, Florida Desmodium tortuosum Broomweed, common Gutierrezia dracunculoides Buckwheat, tartary Fagopyrum tataricum Buckwheat, wild Polygonum convolvulus Buffalobur Solanum rostratum Burclover, California Medicago polymorpha Burcucumber Sicyos angulatus Buttercup, corn Ranunculus arvensis Buttercup, creeping Ranunculus repens Buttercup, roughseed Ranunculus muricatus Buttercup, western field Ranunculus occidentalis Carpetweed Mollugo verticillata Catchfly, nightflowering Silene noctiflorum Chamomile, corn Anthemis arvensis (continued) Table 1. Weeds Controlled or Suppressed (continued) Common Name Scientific Name Annuals (continued) Chervil, bur Anthriscus caucalis Chickweed, common Stellaria media Clover Trifolium spp . Cockle, corn Agrostemma githago Cockle, cow Vaccaria pyramidata Cocklebur, common Xanthium strumarium Copperleaf, hophornbeam Acalypha ostryifolia Cornflower Centaurea cyanus Croton, tropic Croton glandulosus Croton, woolly Croton capitatus Daisy, English Bellis perennis Dragonhead, American Dracocephalum parviflorum Eveningprimrose, cutleaf Oenothera laciniata Falseflax, smallseed Camelina microcarpa Fleabane, hairy Conyza bonariensis Flixweed Descurainia sophia Fumitory Fumaria officinalis Goosefoot, nettleleaf Chenopodium murale Hempnettle Galeopsis tetrahit Henbit Lamium amplexicaule Horseweed (Marestail) Conyza canadensis Jacob’s-ladder Polemonium caeruleum Jimsonweed Datura stramonium Knawel (German moss) Scleranthus annuus Knotweed, prostrate Polygonum aviculare Kochia3 Kochia scoparia Ladysthumb Polygonum persicaria Lambsquarters, common Chenopodium album Lettuce, miner’s Claytonia perfoliata Lettuce, prickly Lactuca serriola Mallow, common Malva neglecta Mallow, Venice Hibiscus trionum Mayweed Anthemis cotula Morningglory, ivyleaf Ipomoea hederacea Morningglory, tall Ipomoea purpurea Mustard, black Brassica nigra Mustard, blue Chorispora tenella Mustard, tansy Descurainia pinnata (continued)

6 Table 1. Weeds Controlled or Suppressed (continued) Common Name Scientific Name Annuals (continued) Mustard, treacle Erysimum repandum Mustard, tumble Sisymbrium altissimum Mustard, wild Sinapis arvensis Mustard, yellowtop Sinapis spp . Nightshade, black Solanum nigrum Nightshade, cutleaf Solanum triflorum Pennycress, field Thlaspi arvense Pepperweed, Virginia Lepidium virginicum Pigweed, prostrate Amaranthus blitoides Pigweed, redroot (rough) Amaranthus retroflexus Pigweed, smooth Amaranthus hybridus Pigweed, tumble Amaranthus albus Pineappleweed Matricaria matricarioides Poorjoe Diodia teres Poppy, red horn Glaucium corniculatum Puncturevine Tribulus terrestris Purslane, common Portulaca oleracea Pusley, Florida Richardia scabra Radish, wild Raphanus raphanistrum Ragweed, common Ambrosia artemisiifolia Ragweed, giant Ambrosia trifida Ragweed, lanceleaf Ambrosia bidentata Rocket, London Sisymbrium irio Rocket, yellow Barbarea vulgaris Rubberweed, bitter Hymenoxys odorata Salsify Tragopogon porrifolius Senna, coffee Senna occidentalis Sesbania, hemp Sesbania exaltata Shepherd’s purse Capsella bursa-pastoris Sicklepod Cassia obtusifolia Sida, prickly (Teaweed) Sida spinosa Smartweed, green Polygonum scabrum Smartweed, Pennsylvania Polygonum pensylvanicum Sneezeweed, bitter Helenium amarum Sowthistle, annual Sonchus oleraceus Sowthistle, spiny Sonchus asper Spanish needles Bidens bipinnata Spikeweed, common Hemizonia pungens (continued) Table 1. Weeds Controlled or Suppressed (continued) Common Name Scientific Name Annuals (continued) Spurge, prostrate Chamaesyce humistrata Spurry, corn Spergula arvensis Starbur, bristly Acanthospermum hispidum Starwort, little Stellaria graminea Sumpweed, rough Iva ciliata Sunflower, common (wild) Helianthus annuus Thistle, Russian Salsola iberica Velvetleaf Abutilon theophrasti Waterhemp Amaranthus tuberculatus Waterprimrose, winged Ludwigia decurrens Wormwood Artemisia annua Biennials Burdock, common Arctium minus Carrot, wild Daucus carota Cockle, white Melandrium album Eveningprimrose, common Oenothera biennis Geranium, Carolina Geranium carolinianum Gromwell Lithospermum spp . Knapweed, diffuse Centaurea diffusa Knapweed, spotted Centaurea maculosa Mallow, dwarf Malva borealis Plantain, bracted Plantago aristata Ragwort, tansy Senecio jacobaea Starthistle, yellow Centaurea solstitialis Sweetclover Melilotus spp . Teasel Dipsacus sativus Thistle, bull Cirsium vulgare Thistle, musk Carduus nutans Thistle, plumeless Carduus acanthoides Thistle, variegated (milk) Silybum marianum Perennials1 Alfalfa Medicago sativa Apple, tropical soda Solanum viarum Artichoke, Jerusalem Helianthus tuberosus Aster, spiny Aster spinosus Aster, whiteheath Aster pilosus Bedstraw, smooth Gallium mollugo Bindweed, field Convolvulus arvensis (continued)

7 Table 1. Weeds Controlled or Suppressed (continued) Common Name Scientific Name Perennials1 (continued) Bindweed, hedge Calystegia sepium Blueweed, Texas Helianthus ciliaris Bursage, woollyleaf Ambrosia grayi Buttercup, tall Ranunculus acris Campion, bladder Silene vulgaris Chickweed, field Cerastium arvense Chickweed, mouseear Cerastium vulgatum Chicory Cichorium intybus Clover, hop Trifolium aureum Dandelion, common Taraxacum officinale Dock, broadleaf (Bitterdock) Rumex obtusifolius Dock, curly Rumex crispus Dogbane, hemp Apocynum cannabinum Dogfennel (Cypressweed) Eupatorium capillifolium Fern, bracken Pteridium aquilinum Garlic, wild Allium vineale Goldenrod, Canada Solidago canadensis Goldenrod, Missouri Solidago missouriensis Goldenweed, common Isocoma coronopifolia Hawkweed Hieracium spp . Henbane, black Hyoscyamus niger Horsenettle, Carolina Solanum carolinense Ironweed Vernonia spp . Knapweed, black Centaurea nigra Knapweed, Russian Centaurea repens Lespedeza, sericea Lespedeza cuneata Milkweed, climbing Sarcostemma cyanchoides Milkweed, common Asclepias syriaca Milkweed, honeyvine Ampelamus albidus Milkweed, western whorled Asclepias subverticillata Nettle, stinging Urtica dioica Nightshade, silverleaf Solanum elaeagnifolium Onion, wild Allium canadense Plantain, broadleaf Plantago major Plantain, buckhorn Plantago lanceolata Pokeweed Phytolacca americana Ragweed, western Ambrosia psilostachya Redvine Brunnichia ovata (continued) Table 1. Weeds Controlled or Suppressed (continued) Common Name Scientific Name Perennials1 (continued) Smartweed, swamp Polygonum coccineum Snakeweed, broom Gutierrezia sarothrae Sorrel, red (Sheep sorrel) Rumex acetosella Sowthistle, perennial Sonchus arvensis Spurge, leafy Euphorbia esula Sundrop Oenothera perennis Thistle, Canada Cirsium arvense Thistle, Scotch Onopordum acanthium Toadflax, Dalmatian Linaria genistifolia Trumpetcreeper Campsis radicans Vetch Vicia spp . Waterhemlock, spotted Cicuta maculata Waterprimrose, creeping Ludwigia peploides Woodsorrel, creeping Oxalis corniculata Woodsorrel, yellow Oxalis stricta Wormwood, Louisiana Artemisia ludoviciana Yankeeweed Eupatorium compositifolium Yarrow, common Achillea millefolium Woody Brush and Vines 1, 2 Alder Alnus spp . Ash Fraxinus spp . Basswood Tilia americana Beech Fagus spp . Birch Betula spp . Cherry Prunus spp . Chinquapin Chrysolepis chrysophylla Cottonwood Populus deltoides Cucumbertree Magnolia acuminata Elm Ulmus spp . Grape Vitus spp . Hemlock Tsuga spp . Hickory Carya spp . Honeylocust Gleditsia triacanthos Honeysuckle Lonicera spp . Hornbeam Carpinus spp . Huckleberry Vaccinium arboreum Huisache Acacia farnesiana Ivy, poison Rhus radicans (continued)

8 Table 1. Weeds Controlled or Suppressed (continued) Common Name Scientific Name Woody Brush and Vines 1, 2 (continued) Kudzu Pueraria lobata Locust, black Robinia pseudoacacia Maple Acer spp . Mesquite Prosopis ruscifolia Oak Quercus spp . Oak, poison Rhus toxicodendron Olive, Russian Elaeagnus angustifolia Persimmon, eastern Diospyros virginiana Pine Pinus spp . Poplar Populus spp . Rabbitbrush Chrysothamnus pulchellus Rose, multiflora Rosa multiflorum Sassafras Sassafras albidum Serviceberry Amelanchier sanguinea Spicebush Lindera benzoin Spruce Picea spp . Sumac Rhus spp . Sycamore Platanus occidentalis Tarbush Flourensia cernua Willow Salix spp . Witchhazel Hamamelis macrophylla 1 Suppression only . 2 Not for use in California . 3 Except dicamba resistant . Product Stewardship Practices • Apply EverdantTM herbicide to weeds 4 inches or less in size for best performance . • Apply Everdant at the labeled rate to minimize the likeli- hood of weed resistance occurring . DO NOT apply at less than the labeled rate . See Crop- specific Information for labeled rates by crop . • Use Everdant as part of a herbicide program that includes the use of residual herbicides and herbicides with alternate sites of action to reduce resistance selec- tion pressure . • Select nozzles that produce coarse to ultra-coarse spray droplets . • Maintain boom height 24 inches or less from target . • Identify areas of sensitive nontarget crops/plants and maintain proper setback distance from these areas . Sensitive crops in agricultural and/or residential settings can include, but are not limited to:

• non-DT soybeans
• cucumber and melons (EPA Crop Group 9)
• flowers
• fruit trees
• grapes
• ornamentals including greenhouse-grown and shade house-grown broadleaf plants
• peanuts
• peas and beans (EPA Crop Group 6)
• peppers, tomatoes, and other fruiting vegetables (EPA  Crop Group 8)
• potato
• sweet potato
• tobacco • Thoroughly clean spray equipment before and after application . Mode of Action Dicamba, the active ingredient in Everdant, is a Group 4 (WSSA) herbicide . Herbicides in this group mimic auxin (a plant hormone) resulting in a hormone imbalance in sensi - tive plants that interferes with normal plant growth (e .g . cell division, cell enlargement, and protein synthesis) . Everdant is readily absorbed by leaves, roots, and shoots; translocates throughout the plant; and accumulates in areas of active growth to provide post emergence control of emerged weeds as well as moderate residual control of germinating weed seeds . Any weed population may contain plants naturally resistant to Group 4 herbicides . Weeds resistant to Group 4 herbi- cides should be managed using effective herbicide(s) from a different group and/or by using cultural or mechanical practices . Report any incidence of non-performance of this product against a particular weed species at www.EngeniaQuestions.com . Consult your local BASF representative, state cooperative extension service, profes - sional consultants, or other qualified authority to determine appropriate actions if you suspect resistant weeds . Addi- tional information about weeds which are known to be resistant to dicamba can be found at www.Resistance- Information.BASF.US . Resistance Management While weed resistance to Group 4 herbicides is infre- quent, populations of resistant biotypes are known to exist . Resistance management should be part of a diversified weed control strategy that integrates multiple options including chemical, cultural, and mechanical (tillage) con - trol tactics . Cultural control tactics include crop rotation, proper fertilizer placement, optimum seeding rate/row spacing, and timely tillage . To aid in the prevention of developing weeds resistant to this product, the following steps should be followed where practical: • Start clean with tillage or an effective burndown herbi - cide program . • DO NOT rely on a single herbicide site of action for weed control during the growing season . • Scout fields before application to ensure herbicides and rates will be appropriate for the weed species and weed sizes present . • Apply full labeled rates of Everdant for the most difficult-to-control weed in the field at the specified time

9 (correct weed size) to minimize weed escapes . See Crop-specific Information for labeled rates by crop . • Use of preemergence herbicides that provide soil residual control of broadleaf and grass weeds is recommended to reduce early season weed competition and allow for more timely in-crop postemergence herbicide applications . • Avoid application of herbicides with the same site of action more than twice a season . • Scout fields after application to detect weed escapes or shifts in weed species . • Indicators of possible herbicide resistance include: (1) failure to control a weed species normally controlled by the herbicide at the dose applied, especially if control is achieved on adjacent weeds; (2) a spreading patch of non-controlled plants of a particular weed species; (3) surviving plants mixed with controlled individuals of the same species . • Report any incidence of non-performance of this product against a particular weed species to your BASF retailer or representative . • If resistance is suspected, treat weed escapes with a herbicide having a mode of action other than Group 4 and/or use non-chemical methods to remove escapes, as is practical, with the goal of preventing further seed production . • For more information about weeds that are known to be resistant to dicamba go to www.Resistance-Information.BASF.US . Additionally, users should follow as many of the following herbicide resistance management practices as is practical: • Use a broad spectrum soil-applied herbicide with other modes of action as a foundation in a weed control program . • Utilize sequential applications of herbicides with alterna - tive modes of action . • Rotate the use of this product with non-Group 4 herbicides . • Avoid making more than two applications of EverdantTM herbicide and any other Group 4 herbicides within a single growing season unless mixed with another mech - anism of action with an overlapping spectrum for the difficult-to-control weeds . • Incorporate non-chemical weed control practices, such as mechanical cultivation, crop rotation, cover crops and weed-free crop seeds, as part of an integrated weed control program . • Thoroughly clean plant residues from equipment before and after leaving fields suspected to contain resistant weeds . • Manage weeds in and around fields during and after har - vest to reduce weed seed production . • Contact the local agricultural extension service, BASF representative, ag retailer or crop consultant for further guidance on weed control practices as needed . Crop Tolerance Crops growing under normal environmental conditions are tolerant to Everdant when applied according to label directions . Crop injury may occur under stressful growing conditions (e .g . low soil fertility, seedling disease, extreme hot or cold weather, excessive moisture, high soil pH, high soil salt concentration, drought) . Application Instructions Apply Everdant by ground to actively growing weeds as a band, broadcast, or spot spray application for postemer- gence control of emerged weeds as well as moderate residual control of germinating weed seeds . Make postemergence applications of Everdant when broadleaf weeds are small and actively growing . An adjuvant is recommended with Everdant for best post- emergence activity; refer to Tank Mixing Information section and Crop-specific Information sections for details . Postemergence activity may be slowed or reduced under cloudy and/or foggy or cooler weather conditions, or when weeds are growing under drought or other stress conditions . When targeting dense weed populations and/ or larger broadleaf weeds, use higher spray volumes and a higher application rate within an application rate range . Cultivation should be delayed until 7 days after applying Everdant or a reduction in weed control may occur . Use extreme care when applying Everdant to prevent injury to desirable plants . Everdant may cause injury to desirable sensitive plants when contacting their roots, stems, or foliage . Application Rates Always read and follow crop-specific use directions . Table 2. Application Rate to Control or Suppress Target Weed by Weed Type and Growth Stage Everdant must always be tank mixed with an adjuvant when used for control of emerged broadleaf weeds . (See Crop-specific Information section for additional directions and exceptions)

10 Weed Type and Growth Stage Rate/Acre2,5 (fl ozs) Annual Small, actively growing1 (less than 4-inches tall) 3 .2 to 12 .8 Small, actively growing (less than 4-inches tall) plus moderate residual control 12 .8 Biennial Rosette diameter 1 to 3 inches1 6 .4 to 12 .8 Rosette diameter more than 3 inches 12 .8 Perennial3 Top growth suppression 6 .4 to 12 .8 Top growth control and root suppression 12 .8 Woody Brush and Vines 3,4 Top growth suppression 12 .8 1 Although rates below 12 .8 fl ozs/A (refer to crop-specific sec - tions of the label for minimum use rates) may provide adequate control of annual and biennial weeds, for optimum performance use the higher listed rates or apply the lower listed rate as a tank mix with other herbicides that are effective on the same species and biotype . 2 Use the higher rate within listed ranges when treating weeds resis - tant to other sites of action, dense vegetative growth, or weeds with a well-established root system . The higher rates also provide moder- ate residual annual weed control . 3 Everdant TM herbicide will suppress the top growth of herbaceous perennial and woody brush and vines and can be combined with other herbicides to improve control . 4 Not for use in California . 5 DO NOT broadcast-apply more than 12 .8 fl ozs/A per application . Retreatment or tank mixes may be necessary for best control of some weeds . However, sequential applications must not exceed a maximum cumulative total of 51 .2 fl ozs/A of Everdant (2 lbs dicam- ba ae/A) per year . Application Methods and Equipment Apply Everdant by ground or by air . Thorough spray cov- erage is important for best broadleaf weed control and can be improved with adjuvant, nozzle, and spray volume selection . A spray adjuvant must always be used with Everdant when applying for the control of emerged broadleaf weeds . Calibrate application equipment for accurate target spray volume and application rate to ensure uniform distribution of spray and to avoid spray drift to nontarget areas . Adjust equipment to maintain continuous agitation during spraying with good mechanical or bypass agitation . Avoid overlaps that will increase rates above the labeled use rates . Everdant may be applied using water; consult crop- specific information sections of this label for other spray carrier options . Aerial Application Methods and Equipment Water Volume: Use 1 to 10 gallons of water per acre (2 to 20 gallons of diluted spray per treated acre for preharvest uses) . Use the higher spray volume when treating dense or tall vegetation . Application Equipment: Select nozzles designed to pro- duce minimal amounts of fine spray particles . Make aerial applications at the lowest safe height to reduce exposing the spray to evaporation and wind . The applicator must follow the most restrictive use cautions to avoid drift haz- ards, including those found in this labeling, as well as state and local regulations and ordinances . DO NOT use aerial equipment if spray particles can be carried by the wind into areas where sensitive crops or plants are growing or when temperature inversions exist . Ground Application Banding Applications When applying Everdant by banding, use the following formula to calculate the amount of herbicide and water vol- ume needed: Bandwidth in inches x Broadcast rate per acre = Banding herbicide rate per acreRow width in inches Bandwidth in inches x Broadcast volume per acre = Banding water volume per acreRow width in inches Broadcast Applications Unless noted in the crop-specific information section, use a spray volume of 15 gallons of water or more per treated acre . Thorough coverage of existing vegetation is essential for postemergence applications; higher spray volumes may be necessary for optimum performance . Wiper Applications Everdant may be applied through wiper application equipment to control or suppress actively growing broad- leaf weeds, brush, and vines . Use a 50% solution containing 1 part Everdant to 1 part water . • DO NOT apply more than 12 .8 fl ozs/A of Everdant [0 .5 lb dicamba acid equivalent (ae) per acre] per application . • DO NOT contact desirable vegetation with herbicide solu- tion . Wiper application may be made to crops (including pastures) and noncropland areas described in this label . EXCEPTION: DO NOT use wiper application on cotton or soybean . Spray System Equipment Clean-out The applicator must ensure that the spray system used to apply Everdant is clean before application . Additionally, small quantities of ammonium sulfate (AMS) can increase the volatility potential of Everdant . Be sure that any spray mixture from a prior application that contains AMS is drained and rinsed from the sprayer . After using Everdant, clean all mixing and spray equipment (including tanks, pumps, lines, filters, screens, and nozzles) with a strong detergent based sprayer cleaner . Severe crop injury may occur if any Everdant remains in the spray equip- ment following application and is subsequently applied to sensitive crops . Dispose of rinsate in compliance with local, state, and federal guidelines .

11 1 . After spraying, drain the sprayer (including boom and lines) . Avoid allowing the spray solution to remain in the spray boom lines overnight or for extended periods of time . 2 . Flush tank, hoses, boom, and nozzles with clean water . Open boom ends and flush if so equipped . 3 . Inspect and clean all strainers, screens, and filters . 4 . Use commercial sprayer cleaner containing strong detergents according to the manufacturer’s directions . 5 . Wash all parts of the tank, including the inside top sur- face . Start agitation in the sprayer and thoroughly recirculate the cleaning solution for at least 15 minutes . All visible deposits must be removed from the spraying system . 6 . Flush hoses, spray lines, and nozzles with the cleaning solution for at least 1 minute . Remove nozzles, screens, and strainers, and clean separately in the cleaning solution after completing the above procedure . 7 . Drain pump, filter, and lines . 8 . Triple rinse the complete spraying system with clean water . 9 . Clean and rinse the exterior of the sprayer . 10 . Appropriately dispose of all rinsate in compliance with local, state, and federal requirements . Spray Drift Management Avoiding spray drift at the application site is the responsibili- ty of the applicator . The spray system and weather- related factors determine the potential for spray drift . The applicator is responsible for considering these factors when making application decisions to avoid spray drift onto nontarget areas . Applicators must follow application requirements to avoid spray drift hazards, including those found in this labeling and applicable state and local regulations and ordinances . Where states have more stringent regulations, they must be observed . All application equipment must be properly maintained and calibrated using appropriate carriers . DO NOT allow herbicide solution to drip, physically drift, or splash onto desirable vegetation because severe injury or destruction to desirable broadleaf plants could result . The following physical spray drift management requirements must be followed . Controlling Droplets Drift potential may be reduced by applying large droplets that provide sufficient coverage and control . Applying larg- er droplets can reduce drift potential, but will not prevent drift if the application is made improperly, or under unfa - vorable environmental conditions (see the Temperature Inversions and the Wind Speed and Direction Requirements sections) . • Nozzle Type - Use nozzles that produce course to ultra course spray droplets and minimize the production of fine droplets . • Pressure - DO NOT exceed the nozzle manufacturer’s specified pressures . For many nozzle types, lower pres- sure produces larger droplets . When higher flow rates are needed, use higher flow rate (large orifice) nozzles instead of increasing pressure . Ensure sprayer rate con- troller hardware (if so equipped) does not allow pressure increases above the desired range . • Spray Volume - Apply this product in a minimum of 15 gallons of spray solution per acre . Use a higher spray volume when treating dense vegetation . Higher spray volumes may also allow the use of larger nozzle orifices (sizes) which produce coarser spray droplets . • Equipment Ground Speed - Select a ground speed that will deliver the desired spray volume while maintain - ing the desired spray pressure, but DO NOT exceed a ground speed of 15 miles per hour . Slower speeds gen- erally result in better spray coverage and deposition on the target area . It is recommended that ground speed be reduced to 5 miles per hour when making applications to the edge of the treatment area . • Spray Boom Height - Spray at the appropriate boom height based on nozzle selection and nozzle spacing, but DO NOT exceed a boom height of 24 inches above target pest or crop canopy . Set boom to lowest effective height over the target pest or crop canopy based on equipment manufacturer’s directions . Automated boom height con- trollers are recommended with large booms to better maintain optimum nozzle to canopy height . Excessive boom height will increase the potential for spray drift . • Hooded Spray Booms - Hooded spray booms are another tool that can be used to minimize spray drift potential . EverdantTM herbicide may be applied using a hooded spray boom in combination with approved noz- zles; however, the applicator must ensure the configuration is compatible with equipment used . Temperature Inversions • DO NOT apply Everdant when temperature inversions exist at the field level . Temperature inversions increase drift potential by reducing atmospheric mixing and dispersion of any suspended spray mixture . Suspended spray residues can move in unpredictable directions because of the light, variable winds common during inversions . Temperature inversions are characterized by increasing temperatures with altitude and are common on nights with limited cloud cover and light-to-no wind . Inversions begin to form as the sun sets and often contin- ue into the morning before surface warming . Their presence can be indicated by ground fog, smoke not ris- ing, dust hanging over a road, or presence of dew or frost . Smoke that layers and moves laterally (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing . Inversion conditions typically dissipate with increased winds (above 3 MPH) or when surface air begins to warm (3° F from morning low) .

12 Treatment Zone Awareness (Sensitive Areas, Sensitive Crops and Residential Areas) Sensitive Areas EverdantTM herbicide should only be applied when there is low potential for drift to sensitive areas (see Definitions) . It is best to apply when the wind is blowing away from sen- sitive areas . Sensitive Crops and Residential Areas • DO NOT apply under circumstances where spray drift may occur to food, forage, or other plantings that might be damaged or the crops thereof rendered unfit for sale, use or consumption . • During application and sprayer clean-out, DO NOT allow contact of herbicide with foliage, green stems, exposed non-woody roots of crops, and desirable plants . • Downwind and Shifting Winds

• DO NOT apply when wind is blowing in the direction of neighboring sensitive crops or residential areas .
• The appropriate distance must be determined by the applicator relative to where the application is being made, the environmental conditions, and the potential risk to downwind sensitive crops and residential areas .
• The applicator also must be aware that WIND DIRECTION may vary during the application . If wind direction shifts such that the wind is blowing toward neighboring sensitive crops or residential areas, STOP the application . Survey the area before spraying: Small amounts of spray drift that may not be visible may injure sensitive broadleaf plants . Before making an application, the appli- cator must survey the application site for neighboring sensitive crops and residential areas . The applicator must consult sensitive crop registries where available . Plant inju- ry could occur if contact between this product and these crops/plants occurs . See www.driftwatch.org or other sensitive crop registry websites for more information on possible sensitive sites near your application location . AVOIDING SPRAY DRIFT AT THE APPLICATION SITE IS THE RESPONSIBILITY OF THE APPLICATOR. The interaction of equipment and weather related factors must be monitored to maximize performance and on- target spray deposition . The applicator is responsible for considering all of these factors when making a spray deci - sion . The applicator is responsible for compliance with state and local pesticide drift regulations . Definitions • Sensitive Areas - Bodies of water and nonresidential, uncultivated areas that may harbor sensitive plant species . • Sensitive Crops and Residential Areas - Food, forage, or other plantings grown for sale, use or con- sumption . Sensitive crops/plants also can be present in nonagricultural settings, such as residential areas . Examples include, but are not limited to:
• non-DT soybeans
• cucumber and melons (EPA  Crop Group 9 )
• flowers
• fruit trees
• grapes
• ornamentals including greenhouse-grown and shade house-grown broadleaf plants
• peanuts
• peas and beans (EPA  Crop Group 6 )
• peppers, tomatoes, and other fruiting vegetables (EPA  Crop Group 8 )
• potato
• sweet potato
• tobacco Severe injury or destruction could occur if any contact between this product and these crops/plants occurs . Wind Speed and Direction Requirements • Wind Speed - 3 to 15 mph • Wind Direction - Local terrain can influence wind pat- terns . Every applicator must be familiar with local wind patterns and how they affect drift . Tank Mixing Information Everdant may be tank mixed with other products that are not prohibited on this label and are approved for use on the target crop or area . A spray adjuvant should always be used with Everdant when applying for the control of emerged broadleaf weeds . To improve postemergence weed control with Everdant, a Chemical Producers and Distributors Association (CPDA) certified adjuvant may be used . Some adjuvants have the potential to cause crop injury under certain conditions, at certain growth stages and/or under other circumstances . Read all labels for products used in the tank mixture prior to use to determine the potential for crop injury . Surfactants and Spreaders Nonionic Surfactants/Spreaders (NIS) Use an agriculturally approved nonionic surfactant (containing at least 80% active ingredient) at 1 to 2 pints/100 gallons [0 .12 to 0 .25% volume/volume (v/v)] . Use the highest rate of NIS when using the lower rate ranges of a tank mix or when treating more mature and difficult-to-control weeds or dense vegetative growth . OR Oil Concentrate Surfactants (COC, HSOC, MSO)* Instead of NIS, oil concentrate may be used at 1 to 2 quarts/100 gallons (0 .5% to 1% v/v), but at least 1 pint/acre . (alternate text: DO NOT use oil concentrate for postemergence in-crop applications unless specifically

13 allowed in the Crop-specific Information section of this label) . A crop oil concentrate must contain either a petroleum-oil or vegetable-oil base and must: • Be non-phytotoxic • Contain only EPA-exempt ingredients • Provide good mixing quality in the jar test • Be successful in local experience Petroleum-oil and vegetable-oil concentrates should con - tain emulsifiers to provide good mixing quality . Highly refined vegetable oils have proven more satisfactory than unrefined vegetable oils .

• COC - crop oil concentrate HSOC - high surfactant oil concentrate MSO - methylated seed oil Warnings and Restrictions: • Some COC, HSOC and MSO adjuvants may cause a temporary crop response . • DO NOT tank mix products containing ammonium salts such as ammonium sulfate and urea ammonium nitrate (UAN) . • DO NOT add adjuvants that will further decrease pH or acidify the spray solution . • Spray mixtures with lower pH levels (less than pH 5) can increase the potential volatility of dicamba . To mitigate this potential it is important to know the pH of your spray mixture and make appropriate adjustments . Talk with your local agricultural consultant, extension agent, or BASF representative for recommendations to prevent low pH spray mixtures . • Use of an approved neutral buffering agent may be warrant- ed if the water source or tank mix components will create an acidic spray solution less than pH 5 . Possible ways to check the pH of the spray mixture is with a litmus paper test or pH meter . If the pH needs to be increased then consider using an approved neutral buffering agent . • Hard water does not usually affect the activity of EverdantTM herbicide; however, other tank mix compo- nents may be adversely affected (e .g . glyphosate) . Use of an approved conditioning agent should be considered when hard water (i .e . total calcium, magnesium, and iron content above 500 ppm) is used as a spray carrier . • Drift reduction agents can minimize the percentage of driftable fines . However, the applicator must check with the DRA manufacturer to determine if the DRA will work effectively with the spray nozzle, the spray pressure, and the desired spray solution . Refer to the tank mix product labels to confirm that the respective tank mix products are registered for the specific crop use; follow required crop rotation restrictions . Read and follow the applicable restrictions and limitations and Directions For Use on all product labels involved in tank mixing . Always follow the most restrictive label use direc- tions; refer to crop-specific information section for details . Mixing Everdant with postemergence grass (graminicide) herbicides may reduce the effectiveness of those prod - ucts . Follow graminicide label when mixing with Everdant to ensure optimum weed control . Physical incompatibility, reduced weed control, or crop injury may result from mixing Everdant with other pesticides, additives, nutrition- als, etc . Compatibility Test for Mix Components Before mixing components, always perform a compatibility jar test . 1 . For 20 gallons per acre spray volume, use 3 .3 cups (800 mL) of water . For other spray volumes, adjust rates accordingly . Only use water from the intended source at the source temperature . 2 . Add components in the sequence indicated in the fol - lowing Mixing Order instructions using 2 teaspoons for each pound or 1 teaspoon for each pint of labeled use rate per acre . 3 . Cap the jar and invert 10 cycles between component additions . 4 . When the components have all been added to the jar, let the solution stand for 15 minutes . 5 . Evaluate the solution for uniformity and stability . The spray solution should not have free oil on the surface; fine particles that precipitate to the bottom; or thick (clabbered) texture . If the spray solution is not compatible, repeat the compatibility test with the addition of a suitable compatibility agent . If the solution is then compatible, use the compatibility agent as directed on its label . If the solution is still incompatible, DO NOT mix the ingredients in the same tank . Mixing Order Make sure each component is thoroughly mixed and sus - pended before adding tank mix partners . Except when mixing products in PVA bags, maintain constant agitation during mixing and application . 1 . Water - Begin by agitating a thoroughly clean sprayer tank 1/2 to 3/4 full of clean water . 2 . Inductor - If an inductor is used, rinse it thoroughly after each component has been added . 3 . Products in PVA bags - Place any product contained in water-soluble PVA bags into the mixing tank . Wait until all water-soluble PVA bags have fully dissolved and the product is evenly mixed in the spray tank before continuing . 4 . Water-soluble products and additives ( Everdant) 5 . Water-dispersible products (such as dry flowables, wettable powders, suspension concentrates, or suspo-emulsions) 6 . Emulsifiable concentrates (including NIS and oil concentrate) 7 . Remaining quantity of water Maintain continuous and constant agitation throughout mix- ing and application until spraying is completed . If the spray mixture is allowed to settle for any period of time, thorough agitation is essential to resuspend the mixture before spray- ing is resumed . Continue agitation while spraying .

14 Use Precautions • Stress - Application to crops under stress because of lack of moisture, hail damage, flooding, herbicide injury, mechanical injury, or widely fluctuating temperatures may result in crop injury . • Rainfast Period - EverdantTM herbicide is rainfast 4 hours after application . Postemergence activity may be reduced if rain or irrigation occurs within 4 hours of application . Use Restrictions Applicator MUST ALSO follow restrictions under Crop-specific Information section(s). • Maximum Seasonal Use Rate - Refer to crop-specific information sections for maximum seasonal application rates for each crop or use pattern . • DO NOT apply Everdant with ammonium- containing additives, conditioners, or fertilizers (e .g . AMS, UAN) . Small quantities of AMS can greatly increase the volatility potential of dicamba . • DO NOT apply Everdant if wind speed is greater than 15 mph . • DO NOT contaminate irrigation ditches or water used for domestic purposes . • DO NOT apply Everdant through any type of irrigation system (e .g . chemigation) . • DO NOT tank mix Everdant with Lorsban® insecticide . • DO NOT apply more than 12 .8 fl ozs/A (0 .5 pound dicamba ae/A) in a single application of Everdant . • DO NOT apply more than a maximum cumulative total of 2 pounds dicamba ae/A from all product sources per cropping season . Crop Rotation Restrictions Use the following information to determine the required interval between Everdant application and rotational crop planting as well as replanting after crop failure because of environmental factors such as drought, frost, or hail . Deter- mine the rotational crop interval for tank mix products and use the most restrictive interval of all products applied . Table 3. Crop Rotation Restrictions by Application Rate Crop Everdant (fl ozs/A) ≤ 6 .4 9 .6 12 .8 Rotational Crop Interval 1 (days after application) Corn 0 0 0 Cotton, non-DT2 21† 28 42 Cotton, DT 0 0 0 Sorghum 14 21 28 Soybean, non-DT2 14 21 28 Soybean, DT 0 0 0 Grasses3 30 inches or more annual precipitation 14 21 28 Grasses3 less than 30-inches annual precipitation 21 28 42 All other crops 120 120 120 1 DO NOT include time when the soil is frozen and days before receiving any required rainfall or overhead irrigation . 2 Following application of Everdant and a minimum accumulation of 1 inch of rainfall or overhead irrigation, observe the indicated waiting interval . 3 Includes barley, oats, wheat, and other grass crops . Small grains may be planted with no waiting interval following Everdant applied at 3 .2 fl ozs/A . † Missouri and Tennessee Only. Following application of Everdant , wait until an accumulation of 1 inch of rainfall or irrigation followed by an interval of 14 days per 6 .4 fl ozs/A or less before planting cotton . This interval must be observed before planting cotton or severe crop injury may occur .

15 EverdantTM herbicide Crop-specific Use Directions Read product information, application instructions, weeds controlled, and additive instructions in preceding sections of the label . Depending on specific crop application directions, Everdant may be applied for postemergence control of emerged broadleaf weeds and/or residual control of germinating broadleaf weed seeds before crop planting (preplant and/or preseed) and after planting (pre - emergence, postemergence) . Refer to Table 1 for list of weeds controlled or suppressed . Asparagus Everdant may be applied immediately after cutting aspar- agus but at least 24 hours before the next cutting . Apply 6 .4 to 12 .8 fl ozs/A of Everdant in 40 to 60 gallons of dilut- ed spray to emerged and actively growing weeds . Apply 12 .8 fl ozs/A of Everdant to control common chickweed, field bindweed, nettleleaf goosefoot, and wild radish . To improve control of Canada thistle and field bindweed, apply Everdant in combination with glyphosate (e .g .  Roundup® herbicide) or sequentially with 2,4-D . Avoid application to emerged spears . If spray contacts emerged spears, crooking (twisting) of some spears may result . If crooking occurs, discard affected spears . Asparagus Restrictions • DO NOT apply over the top to emerged spears or ferns • DO NOT apply more than a total of 12 .8 fl ozs/A of Everdant (0 .5 pound dicamba ae/A) per year in asparagus . • DO NOT harvest for 24 hours after treatment . • DO NOT use in the Coachella Valley of California . Between Crop Application Everdant may be used as a burndown treatment to con- trol broadleaf weeds at any time of the year during the fallow period following crop harvest and before the follow - ing crop is planted . Apply Everdant as a broadcast or spot treatment to emerged and actively growing weeds after crop harvest (postharvest) and before a killing frost, or in fallow cropland or crop stubble the following spring or summer . Application Rates and Timings Apply Everdant as a broadcast or spot treatment at 3 .2 to 12 .8 fl ozs/A plus specified adjuvants; see Tank Mixing Information section for details . Refer to Table 2 to deter- mine use rates for specific targeted weed species . For best performance, apply Everdant when annual weeds are less than 4-inches tall, when biennial weeds are in the rosette stage, and to perennial weed regrowth in late summer or fall following a mowing or tillage treatment . For the most effective control of upright perennial broadleaf weeds such as Canada thistle and Jerusalem artichoke, apply Everdant when the majority of weeds have at least 4 inches of regrowth, or for weeds such as field bindweed and hedge bindweed that are in or beyond the full bloom stage . Avoid disturbing treated areas following application . Treat- ments may not kill weeds that develop from seed or underground plant parts, such as rhizomes or bulblets, after the effective period for Everdant . For seedling con- trol, a follow-up program or other cultural practices should be instituted . For small grain in-crop uses of Everdant, refer to Small Grain section for details . Specific crop rotation intervals must be observed between an application of Everdant and planting the following crop; see Crop Rotation Restrictions in Use Restrictions section . Use with Other Herbicides Broad-spectrum burndown control of grass weeds and/or additional broadleaf weeds requires another herbicide . Everdant may be applied sequentially with one or more of, but not limited to, the following herbicide products: • Distinct ® herbicide • Facet® L herbicide • Outlook® herbicide • Sharpen® powered by Kixor® herbicide • Verdict® powered by Kixor® herbicide • 2,4-D • glyphosate (e .g . Roundup) It is the pesticide user’s responsibility to ensure that all products are registered for the intended use . Read and follow the applicable restrictions and limitations and direc - tions for use on all product labels involved in tank mixing . Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture . Between Crop Application Restrictions • DO NOT apply more than 12 .8 fl ozs/A (0 .5 pound dicamba ae/A) in a single application of Everdant as a between crop application . • DO NOT apply more than a maximum cumulative total of 2 pounds dicamba ae/A from all product sources per cropping season . Conservation Reserve Program (CRP) Everdant may be used on both newly seeded and estab - lished grasses grown in the Conservation Reserve or federal Set-Aside Programs . Treatment with Everdant will injure or may kill alfalfa, clovers, lespedeza, wild winter peas, vetch, and other legumes .

16 Application Rates and Timings EverdantTM herbicide may be applied at 3 .2 to 12 .8 fl ozs/A; refer to Table 2 for rates based on target weed type and growth stage . Newly Seeded Areas Everdant may be applied either preplant or postemer- gence to newly seeded grasses or small grain including barley, oats, rye, sudangrass, wheat, or other grain spe- cies grown as a cover crop . Postemergence application may be made after seedling grasses exceed the 3-leaf stage . Preplant Intervals. Preplant applications at 12 .8 fl ozs/A may injure new seedings if the interval between application and grass planting is less than: • 20 days - 30 inches or more annual precipitation • 45 days - less than 30-inches annual precipitation Established Grass Stands Established grass stands are perennial grasses planted one or more seasons before treatment . Certain species (bentgrass, buffalograss, carpetgrass, St . Augustinegrass, or smooth brome) may show a response when treated with Everdant . Use with Other Herbicides Broad-spectrum control of broadleaf and grass weeds requires another herbicide . Everdant may be applied sequentially with one or more of, but not limited to, the fol- lowing herbicide products: • Facet® L herbicide • atrazine • glyphosate (e .g . Roundup® herbicide) • paraquat (e .g . Gramoxone® SL herbicide) It is the pesticide user’s responsibility to ensure that all products are registered for the intended use . Read and follow the applicable restrictions and limitations and direc - tions for use on all product labels involved in tank mixing . Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture . CRP Restrictions • DO NOT apply more than 12 .8 fl ozs/A of Everdant per application . • DO NOT apply more than a maximum cumulative total of 51 .2 fl ozs/A of Everdant (2 lbs dicamba ae/A) per season . • Everdant may injure newly seeded grasses and certain species, such as bentgrass, buffalograss, carpetgrass, St . Augustinegrass, or smooth brome . Corn (field, seed, silage) and Popcorn Everdant may be applied preplant surface, pre - emergence, or postemergence to corn . Corn in this label refers to conventional corn (grown for grain, seed, or silage) and popcorn . Before applying Everdant to seed corn or popcorn, verify with your local seed company (supplier) the selectivity of Everdant on your inbred line or hybrid to help avoid potential injury to sensitive inbreds or hybrids . Everdant is not registered for use on sweet corn. Direct contact of Everdant with corn seed must be avoid- ed . If corn seeds are less than 1 .5 inches below the soil surface, delay application until corn has emerged . Postemergence applications of Everdant to corn during periods of rapid growth may result in temporary leaning . Corn will usually become erect within 3 to 7 days . To avoid breakage, delay cultivation until after corn is growing normally . Application Rate Everdant application rates vary by soil texture, organic matter, and application timing . Refer to Table 4 for Everdant application rates by application timing . Up to 2 applications of Everdant may be made during a growing season . Sequential applications must be separated by 2 weeks or more .

17 Table 4. EverdantTM herbicide Application Rates for Corn Soil Texture Organic Matter Application Rate (fl ozs/A) Preplant/ Preemergence 2 Preemergence Postemergence No Tillage Conventional/ Reduced Tillage Early3 Late4 Coarse1 All 6 .4 NA 6 .4 6 .4 Medium/Fine 2 .5% or less 6 .4 NA 6 .4 to 12 .8 6 .4 Medium/Fine more than 2 .5% 12 .8 12 .8 6 .4 to 12 .8 6 .4 1 Coarse soil types include sand, loamy sand, or sandy loam . 2 Use only preemergence applications in conventional and reduced tillage systems . 3 Apply between corn emergence and the 5-leaf stage or 8-inches tall, whichever comes first . Use crop oil concentrate only in dry conditions when corn is less than 5-inches tall and when applying Everdant alone or tank mixed with atrazine . 4 Apply in corn that is 8-inches to 36-inches tall or up to 15 days before tassel emergence, whichever comes first . NA - not applicable Application Timing Preplant (up to 14 days before planting) and Preemergence Applications in No Tillage Corn Everdant can be applied to emerged weeds before, during, or after planting a corn crop . When planting into a legume sod (e .g . alfalfa or clover), apply Everdant after 4 inches of regrowth . For application rates, refer to Table 4 . Preemergence Applications in Conventional or Reduced Tillage Corn Everdant may be applied after planting and before corn emergence; refer to Table 4 for application rates . Preemergence application of Everdant does not require mechanical incorporation to become active . A shallow mechanical incorporation is recommended if the applica - tion is not followed by adequate rainfall or sprinkler irrigation . Avoid tillage equipment (e .g . drags, harrows) that concentrates treated soil over seed furrow or seed dam- age could result . Postemergence Applications (all tillage systems) Apply early postemergence treatment between corn emergence and the 5-leaf stage or 8-inches tall, whichever comes first . Apply later applications when corn is 8-inches to 36-inches tall, or up to 15 days before tassel emergence, whichever comes first . Apply as a directed spray when corn leaves prevent proper spray coverage . Application rates vary by application timing; refer to Table 4 for specific postemergence application rates . Use with Other Herbicides Everdant may be applied sequentially with one or more of, but not limited to, the following herbicide products: • Armezon® herbicide • Armezon® PRO herbicide • Outlook® herbicide • Prowl® H2O herbicide • Sharpen® powered by Kixor® herbicide • Verdict® powered by Kixor® herbicide • Zidua® herbicide • atrazine • glyphosate (e .g . Roundup® herbicide) It is the pesticide user’s responsibility to ensure that all products are registered for the intended use . Read and follow the applicable restrictions and limitations and direc - tions for use on all product labels involved in tank mixing . Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture . NOTE: Refer to tank mix product labels to confirm the respective tank mix products are registered for use on specific corn types . Not all corn products are registered on popcorn and seed corn . Corn and Popcorn Restrictions • DO NOT apply more than 12 .8 fl ozs/A (0 .5 pound dicamba ae/A) in a single application of Everdant . • DO NOT apply more than a maximum cumulative total of 1 .5 pounds dicamba ae/A from all product sources per cropping season . • Corn or popcorn forage and silage may be harvested, fed, or grazed when the crop has reached the ensilage (milk) stage or later in maturity . • Everdant is not registered for use on sweet corn.

18 Cotton Before planting cotton, EverdantTM herbicide may be used early preplant for burndown of actively growing broadleaf weeds; refer to Table 1 for weeds controlled or suppressed . Cotton gin byproducts may be fed to livestock . Application Rates and Timings Apply Everdant as a broadcast spray up to 6 .4 fl ozs/A plus specified adjuvants; refer to Tank Mixing Information section for details . For best performance, apply Everdant when weeds are less than 4 inches in height and rosettes are less than 2-inches across . Following application of Everdant, wait until an accumula- tion of 1 inch of rainfall or irrigation followed by an interval of 21 days per 6 .4 fl ozs/A or less before planting cotton . This interval must be observed before planting cotton or severe crop injury may occur . Missouri and Tennessee Only. Following application of Everdant, wait until an accumulation of 1 inch of rainfall or irrigation followed by an interval of 14 days per 6 .4 fl ozs/A or less before planting cotton . This interval must be observed before planting cotton or severe crop injury may occur . Use with Other Herbicides Broad-spectrum postemergence control of grass weeds or additional broadleaf weeds requires another herbicide such as glyphosate . Everdant may be tank mixed or applied sequentially with one or more of, but not limited to, the following herbicide products: • Sharpen® powered by Kixor® herbicide • glyphosate (e .g . Roundup® herbicide) It is the pesticide user’s responsibility to ensure that all products are registered for the intended use . Read and follow the applicable restrictions and limitations and direc - tions for use on all product labels involved in tank mixing . Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture . Cotton Restrictions • DO NOT apply to dicamba tolerant (DT) cotton . • DO NOT apply more than 6 .4 fl ozs/A (0 .25 pound dicamba ae/A) of Everdant per year (single growing season) . • DO NOT apply preplant to cotton west of Interstate 25 . • DO NOT make Everdant preplant application to cotton in geographic areas with average annual rainfall less than 25 inches . • DO NOT apply more than 1 .5 pounds dicamba acid equivalent per acre for the combination of treatments if applying a spring preplant treatment following application of a fall preplant (postharvest) treatment . Grass Grown for Seed Everdant may be used to control annual and perennial broadleaf weeds after weed emergence . For best perfor- mance, apply Everdant when weeds are less than 4 inches in height and rosettes are less than 2-inches across . Apply Everdant at 6 .4 to 12 .8 fl ozs/A plus speci- fied adjuvants to seedling grasses after the crop reaches 3-leaf to 5-leaf stage; see Tank Mixing Information section for details . Apply up to 12 .8 fl ozs/A of Everdant on well-established perennial grasses . Use the higher rate of the listed rate range when treating more mature weeds or dense vegetative growth . Use with Other Herbicides Everdant may be applied sequentially with one or more of, but not limited to, the following herbicide products: • Facet® L herbicide • Prowl® H2O herbicide It is the pesticide user’s responsibility to ensure that all products are registered for the intended use . Read and follow the applicable restrictions and limitations and direc - tions for use on all product labels involved in tank mixing . Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture . Grass Grown for Seed Restrictions • DO NOT apply Everdant after grass seed crop begins to joint . • DO NOT apply more than 12 .8 fl ozs/A of Everdant (0 .5 lb dicamba ae/A) per application or a cumulative total of 51 .2 fl ozs/A of Everdant (2 lbs dicamba ae/A) per season . • Refer to Table 5 for grazing restrictions . Pasture, Hay, Rangeland, and Farmstead (noncropland) Everdant may be used on pasture, hay, rangeland, and farmstead including fencerows and nonirrigation ditch - banks for control or suppression of broadleaf weed and woody brush and vine species listed in Table 1. Everdant uses described in this section also refer to small grain grown for forage pasture use (rye, sorghum, sudangrass, or wheat) . Grazing and harvest intervals are shown in Table 5 . Everdant may also be applied to noncropland areas to control broadleaf weeds in noxious weed control pro- grams, districts, or areas including broadcast or spot treatment of roadsides, highways, utilities, railroad, and pipeline rights-of-way . Noxious weeds must be recognized at the state level, but programs may be administered at state, county, or other level .

19 Application Rates and Timings Refer to Table 2 for rate selection based on targeted weed or brush species . Some weed species will require a tank mix partner for adequate control . Retreatments may be applied as needed . DO NOT apply more than 25 .6 fl ozs/A of EverdantTM herbicide during a growing season . DO NOT apply more than 12 .8 fl ozs/A of Everdant during a growing season on small grain grown for pasture and newly seeded areas . Established grass crops growing under stress can exhibit various injury symptoms that may be more pronounced if herbicides are applied . Bentgrass, buffalograss, carpet- grass, and St . Augustinegrass may show a response . Usually, colonial bentgrasses are more tolerant than creep - ing types . Velvetgrasses are most easily injured . Treatments will injure or kill alfalfa, clovers, lespedeza, wild winter peas, vetch, and other legumes . Spray volume may range from 10 to 600 gallons per acre . The volume of spray applied depends on the height, densi - ty, and type of weeds or brush being treated and on the type of equipment used . Everdant may be applied as a spot treatment to individual clumps or small areas of unde - sirable vegetation using a handgun or similar type of application equipment . Apply diluted sprays to allow com- plete wetting (up to runoff) of foliage and stems . Table 5. Grazing and Haying Restrictions for Lactating Dairy Animals after Everdant Treatment Everdant Rate (fl ozs/A) Days before Grazing Days before Hay Harvest Up to 12 .8 7 37 Cut-surface Treatment Everdant may be applied as a cut-surface treatment for control of unwanted trees and prevention of sprouts of cut trees . Mix 1 part Everdant with 1 to 3 parts water to cre- ate the application solution . Use the lower dilution rate when treating difficult-to-control species . • Frill or Girdle Treatment - Using an axe to girdle tree trunk, make a continuous cut or a series of overlapping cuts . Spray or paint the cut surface with the solution . • Stump Treatment - Spray or paint freshly cut surface with the water mix . Thoroughly wet the area adjacent to the bark . Dormant Multiflora Rose Applications Everdant can be applied as an undiluted spot treatment directly to the soil or as a Lo-Oil basal bark treatment using an oil-in-water emulsion solution when plants are dormant . Spot Treatment Applications Spot treatment application of Everdant should be applied directly to the soil as close as possible to the root crown within 6 inches to 8 inches of the crown . On sloping ter- rain, apply Everdant to the uphill side of the crown . DO NOT apply when snow or water prevents applying Everdant directly to the soil . The use rate of Everdant depends on the canopy diameter of the multiflora rose . Example Everdant use rates: • 0 .25 fl oz per 5-feet canopy diameter • 1 .0 fl oz per 10-feet canopy diameter • 2 .35 fl ozs per 15-feet canopy diameter Lo-Oil Basal Bark Treatment For Lo-Oil basal bark treatments, apply Everdant to the basal stem region from the ground line to a height of 12 inches to 18 inches . Spray until runoff, with special emphasis on covering the root crown . For best results, apply Everdant when plants are dormant . • DO NOT apply after bud break or when plants are showing signs of active growth . • DO NOT apply when snow or water prevents applying Everdant to the ground line . Lo-Oil Spray Solution Preparation 1 . Combine 1 .5 gallons of water, 1 oz of emulsifier, 12 .8 fl ozs of Everdant, and 2 .5 pints of No . 2 diesel fuel . 2 . Adjust the amounts of materials used proportionately to the amount of final spray solution desired . DO NOT apply more than 8 gallons/A of Lo-Oil spray solu- tion mix per year . Use with Other Herbicides Broad-spectrum control of broadleaf and grass weeds requires another herbicide . Everdant may be applied sequentially with one or more herbicide products: It is the pesticide user’s responsibility to ensure that all products are registered for the intended use . Read and follow the applicable restrictions and limitations and direc - tions for use on all product labels involved in tank mixing . Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture . Pasture, Hay, Rangeland, and Farmstead (noncropland) Restrictions • DO NOT apply more than a maximum cumulative total of 25 .6 fl ozs/A of Everdant (1 lb dicamba ae/A) during a growing season . • DO NOT apply more than a maximum cumulative total of 12 .8 fl ozs/A of Everdant (0 .5 lb dicamba ae/A) to small grain grown for pasture and to newly seeded areas . Proso Millet For use only within Colorado, Nebraska, North Dakota, South Dakota, and Wyoming Apply Everdant and 2,4-D sequentially to provide control or suppression of annual broadleaf weeds; see Table 1 .

20 Apply 3 .2 fl ozs/A of EverdantTM herbicide sequentially with 0 .375 lb acid equivalent of 2,4-D per acre . Apply as a broadcast or spot treatment to emerged and actively growing weeds and when proso millet is in the 2-leaf to 5-leaf stage . Use directions for 2,4-D products vary with manufacturers; refer to a 2,4-D product with labeling con- sistent with the crop-stage timing for Everdant . Some types of proso millet may be affected adversely by a sequential application of Everdant and 2,4-D . Proso Millet Restrictions • DO NOT apply unless possible proso millet crop injury will be acceptable . • DO NOT apply more than 3 .2 fl ozs/A of Everdant (0 .125 lb dicamba ae/A) per season in proso millet . • Refer to Table 5 for grazing restrictions . Small Grain (barley, oats, triticale, and wheat) Everdant may be applied before, during, or after planting small grain (barley, oats, triticale, and wheat) . Refer to Application Rates and Timings for specific small grain crop uses . For best performance, apply Everdant when weeds are less than 4 inches in height and rosettes are less than 2-inches across . Applying Everdant to small grain during periods of rapid growth may result in crop leaning; this condition is temporary and will not reduce crop yield . Restrictions for small grain areas grazed or cut for hay are indicated in Table 5 in Pasture, Hay, Rangeland, and Farmstead (noncropland) section of this label . Application Rates and Timings Early Season Applications Table 6. Early Season Application Rate and Growth Stage in Small Grain 1 Crop Fall-seeded Spring-seeded Rate (fl ozs/A) Growth Stage Rate (fl ozs/A) Growth Stage (up to) Barley2, 3 1 .6 to 3 .2 before joint 1 .6 to 2 .4 4-leaf Oats3 1 .6 to 3 .2 5-leaf Triticale 1 .6 to 3 .2 6-leaf Wheat4 1 .6 to 3 .2 6-leaf 1 An adjuvant system should be used with all Everdant applications; refer to Tank Mixing Information section for details . DO NOT use oil concentrates for postemergence in-crop application . 2 For spring barley varieties seeded during winter months or later, follow the rate and timing given for spring-seeded barley . 3 DO NOT tank mix Everdant with 2,4-D in oats or early season applica - tion on spring-seeded barley . 4 Early developing wheat varieties must receive application between early tillering and the joint stage; ensure that the application occurs before the jointing stage . Fall-seeded Wheat ONLY Western Oregon. When applied in the spring, Everdant may be used at rates up to 4 .8 fl ozs/A on fall-seeded wheat . Periods of extended stress such as cold and wet weather may enhance the possibility of crop injury . Colorado, Kansas, New Mexico, Oklahoma, and Texas. For suppression of perennial weeds (such as field bindweed), up to 6 .4 fl ozs/A of Everdant may be applied on fall-seeded wheat after wheat exceeds the 3-leaf stage . Application may be made in the fall following a frost but before a killing freeze . Everdant at 6 .4 fl ozs/A may be sequentially applied with MCPA after wheat begins to tiller . Periods of extended stress such as cold and wet weather may enhance the possibility of crop injury . For fall applica- tions only, DO NOT apply Everdant if the potential for crop injury is unacceptable . Preharvest Applications To control broadleaf weeds that interfere with harvest, Everdant may be applied before harvest when barley or wheat is in the hard dough stage and the green color is gone from the nodes (joints) of the stem . Best results will be obtained if the application can be made when weeds are actively growing but before weeds canopy . Everdant applications may be made to fall-planted and spring-planted barley and wheat at 6 .4 fl ozs/A as a broadcast application or spot treatment . A preharvest interval (PHI) of 7 days is required before crop harvest . Use with Other Herbicides Broad-spectrum control of broadleaf and grass weeds requires another herbicide . Everdant may be applied sequentially with one or more of, but not limited to, the fol- lowing herbicide products: • Beyond® herbicide (for Clearfield ® wheat and Clearfield ® Plus wheat only) • Clearmax® herbicide (for Clearfield wheat and Clearfield Plus wheat only) • Sharpen® powered by Kixor® herbicide • Zidua® herbicide • 2,4-D amine • MCPA • sulfonylurea-based herbicide (e .g . Ally® herbicide, Express® herbicide, Finesse® herbicide) It is the pesticide user’s responsibility to ensure that all products are registered for the intended use . Read and follow the applicable restrictions and limitations and direc - tions for use on all product labels involved in tank mixing . Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture .

21 Small Grain Restrictions • Maximum use rate per application

• 3 .2 fl ozs/A: Oats and triticale
• 6 .4 fl ozs/A: Spring-seeded barley, fall-seeded barley, wheat • Maximum seasonal use rate
• 3 .2 fl ozs/A: Oats and triticale
• 8 .8 fl ozs/A: Spring-seeded barley
• 9 .6 fl ozs/A: Fall-seeded barley
• 12 .8 fl ozs/A: Wheat • DO NOT apply EverdantTM herbicide preharvest to oats or triticale . • DO NOT use an oil concentrate adjuvant for postemer- gence in-crop application . • DO NOT use preharvest-treated barley or wheat for seed unless a germination test with an acceptable result of 95% germination or more is performed on the seed . • DO NOT graze small grain (barley, oats, triticale, wheat) within 7 days after treatment . • DO NOT harvest for hay within 37 days after treatment . • Barley and wheat may be harvested 7 days or more after a preharvest application . • DO NOT make preharvest application in California . Sorghum Everdant may be used early preplant, postemergence, and preharvest in sorghum to control many annual broad - leaf weeds and to reduce competition from established perennial broadleaf weeds . Application Rates and Timings Preplant Applications (at least 14 days before planting) A preplant application of Everdant up to 6 .4 fl ozs/A may be applied at least 14 days before sorghum planting . Postemergence Applications Up to 6 .4 fl ozs/A of Everdant plus specified adjuvants (refer to Tank Mixing Information section for details) may be applied after sorghum is in the spike stage (all sorghum emerged) but before sorghum is 15-inches tall . For best performance, apply Everdant when sorghum crop is in the 3-leaf to 5-leaf stage and weeds are small (less than 3-inches tall) . Use drop nozzles if sorghum is taller than 8 inches . Keep spray off sorghum leaves and out of the whorl to reduce the like lihood of crop injury and to improve spray coverage of weed foliage . Applying Everdant to sorghum during periods of rapid growth may result in temporary leaning of plants or rolling of leaves . These effects are usually outgrown within 10 to 14 days . Preharvest Applications Oklahoma and Texas ONLY Up to 6 .4 fl ozs/A of Everdant may be applied for weed suppression any time after sorghum has reached the soft-dough stage . An agriculturally approved surfactant may be used to improve performance; see Tank Mixing Information section for details . Delay harvest until 30 days after a preharvest treatment . Split Applications Everdant may be applied in split applications: preplant followed by postemergence or preharvest; or postemer- gence followed by preharvest . DO NOT apply more than 6 .4 fl ozs/A of Everdant per application, or a maximum cumulative total of 12 .8 fl ozs/A of Everdant per year . Use with Other Herbicides Everdant may be applied sequentially with one or more of, but not limited to, the following herbicide products: • Basagran® 5L herbicide • Facet® L herbicide • Outlook® herbicide - (Preplant only) • Sharpen • Verdict® powered by Kixor® herbicide • atrazine • glyphosate (e .g . Roundup® herbicide) It is the pesticide user’s responsibility to ensure that all products are registered for the intended use . Read and follow the applicable restrictions and limitations and direc - tions for use on all product labels involved in tank mixing . Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture . Sorghum Restrictions • DO NOT graze or feed treated sorghum forage or silage before mature grain stage . If sorghum is grown for pas- ture or hay, refer to Pasture, Hay, Rangeland, and Farmstead (noncropland) section for specific grazing and feeding restrictions . • DO NOT apply Everdant to sorghum grown for seed production . • DO NOT apply more than 6 .4 fl ozs/A of Everdant (0 .25 lb dicamba ae/A) per application . • DO NOT apply more than a maximum cumulative total of 12 .8 fl ozs/A of Everdant (0 .5 lb dicamba ae/A) per season . • Oklahoma and Texas only - Delay harvest until 30 days after a preharvest treatment . Soybean Everdant may be used preplant or preharvest in soybean to control many annual broadleaf weeds and to reduce competition from established biennial and perennial broad - leaf weeds .

22 Application Rates and Timings Preplant Applications (at least 14 days before planting) Apply EverdantTM herbicide as a broadcast spray at 3 .2 to 12 .8 fl ozs/A plus specified adjuvants; refer to Tank Mixing Information section for details . Preplant Intervals. Following application of Everdant and a minimum accumulation of 1 inch of rainfall or over- head irrigation, preplant waiting intervals are required before planting soybeans or crop injury may occur: • 14 days for 3 .2 to 6 .4 fl ozs/A • 28 days for 6 .5 to 12 .8 fl ozs/A Preharvest Applications Apply Everdant as a broadcast spray or spot spray at 6 .4 to 12 .8 fl ozs/A plus specified adjuvants; refer to Tank Mixing Information section for details . Applications should be made to emerged and actively growing weeds after soybean pods have reached mature brown color and at least 75% leaf drop has occurred . Treatments may not kill weeds that later develop from seed or underground parts, such as rhizomes or bulblets, after the effective residual period for Everdant . For seedling control, a follow-up program or other cultural practices should be instituted . Use with Other Herbicides Everdant may be applied sequentially with one or more of, but not limited to, the following herbicide products: • Outlook® herbicide • Prowl® H2O herbicide • Pursuit® herbicide • Raptor® herbicide • Sharpen® powered by Kixor® herbicide • Verdict® powered by Kixor® herbicide • Zidua® herbicide • Zidua® PRO powered by Kixor® herbicide • glyphosate (e .g . Roundup® herbicide) It is the pesticide user’s responsibility to ensure that all prod- ucts are registered for the intended use . Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing . Users must follow the most restrictive directions for use and precaution- ary statements of each product in the tank mixture . Soybean Restrictions • DO NOT apply to dicamba tolerant (DT) soybeans . • DO NOT apply more than 12 .8 fl ozs/A of Everdant (0 .5 lb dicamba ae/A) in a spring application before soy - bean planting . • DO NOT make Everdant preplant application to soy- beans in geographic areas with average annual rainfall less than 25 inches . • DO NOT apply more than 25 .6 fl ozs/A of Everdant (1 lb dicamba ae/A) per year (single growing season) . • DO NOT use preharvest-treated soybean for seed unless a germination test with an acceptable result of 95% germination or better is performed on the seed . • DO NOT harvest soybeans until 7 days after a prehar- vest application . • DO NOT feed soybean fodder or hay following prehar- vest application of Everdant . • DO NOT make preharvest applications in California . Sugarcane Everdant may be used any time after weed emergence but before the close-in stage of sugarcane to control many annual and perennial broadleaf weeds; see Table 1 for weeds controlled or suppressed . Apply 6 .4 to 12 .8 fl ozs/A of Everdant for control of annual weeds and 12 .8 fl ozs/A for control or suppression of bien- nial and perennial weeds . Use the higher rate of the specified rate range when treating dense vegetative growth . Repeat treatment may be made as needed; how- ever, DO NOT apply more than the annual maximum cumulative total of 51 .2 fl ozs/A of Everdant (2 lbs dicamba ae/A) . When possible, direct the spray beneath the sugarcane canopy to minimize the likelihood of crop injury . Using directed sprays will also help maximize the spray coverage of weed foliage . Use with Other Herbicides Everdant may be applied sequentially with one or more of, but not limited to, the following herbicide products: • Prowl® H2O herbicide • atrazine It is the pesticide user’s responsibility to ensure that all prod- ucts are registered for the intended use . Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing . Users must follow the most restrictive directions for use and precaution- ary statements of each product in the tank mixture . Sugarcane Restrictions • DO NOT apply more than 12 .8 fl ozs/A of Everdant (0 .5 lb dicamba ae/A) in a single application . • DO NOT apply more than a maximum cumulative total of 51 .2 fl ozs/A of Everdant (2 lbs dicamba ae/A) per grow- ing season . • DO NOT harvest sugarcane until 87 days after application .

23 Farmstead Turf (noncropland) and Sod Farms EverdantTM herbicide may be used in farmstead turf (noncropland) and sod farms to control or suppress growth of many annual, biennial, and some perennial broadleaf weeds; see Table 1 for weeds controlled or sup- pressed . Everdant will also suppress woody brush and vine species; refer to Table 2 for application rates based on targeted weed or woody brush and vine species and growth stage . Some weed species will require tank mixes for optimum control . Repeat treatment may be made as needed; however, DO NOT apply more than 25 .6 fl ozs/A of Everdant (1 lb dicamba ae/A) per growing season . Apply 30 to 200 gallons of diluted spray per acre (3 to 17 quarts of water per 1000 sq ft), depending on density or height of weeds treated and on type of equipment used . To avoid injury to newly seeded grasses, delay application of Everdant until after the second mowing . Established grass crops growing under stress can exhibit various injury symptoms that may be more pronounced if herbicides are applied . Bentgrass, buffalograss, carpetgrass, and St . Augustinegrass may show a response . Use with Other Herbicides Everdant at 3 .2 to 12 .8 fl ozs/A may be applied sequen- tially with one or more of, but not limited to, the following herbicide products: • Drive® XLR8 herbicide • Pendulum® AquaCap herbicide • Tower® herbicide • 2,4-D • MCPA • MCPP It is the pesticide user’s responsibility to ensure that all prod- ucts are registered for the intended use . Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing . Users must follow the most restrictive directions for use and precaution- ary statements of each product in the tank mixture . Farmstead Turf and Sod Farm Restrictions • DO NOT use on residential sites . • DO NOT apply more than 25 .6 fl ozs/A of Everdant (1 lb dicamba ae/A) per growing season . • Areas where Roots of Sensitive Plants Extend

• DO NOT apply more than 3 .2 fl ozs/A of Everdant (0 .125 lb dicamba ae/A) on coarse-texture soils (sand, loamy sand, or sandy loam) .
• DO NOT apply more than 6 .4 fl ozs/A of Everdant on fine-texture soils .
• DO NOT make repeat applications in these areas for 30 days and until previous applications of Everdant have been activated in the soil by rainfall or irrigation .

24 Conditions of Sale and Warranty The Directions For Use of this product reflect the opinion of experts based on field use and tests . The directions are believed to be reliable and must be followed carefully . However, it is impossible to eliminate all risks inherently associated with the use of this product . Crop injury, ineffectiveness or other unintended consequences may result because of such factors as weather conditions, presence of other materials, or use of the product in a manner inconsistent with its labeling, all of which are beyond the control of BASF CORPORATION (“BASF”) or the Seller . To the extent consistent with applicable law, all such risks shall be assumed by the Buyer . BASF warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes referred to in the Directions For Use , subject to the inherent risks, referred to above . TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BASF MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS OR MERCHANTABILITY OR ANY OTHER EXPRESS OR IMPLIED WARRANTY. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BUYER’S EXCLUSIVE REMEDY AND BASF’S EXCLUSIVE LIABILITY, WHETHER IN CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY, OR OTHERWISE, SHALL BE LIMITED TO REPAYMENT OF THE PURCHASE PRICE OF THE PRODUCT. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BASF AND THE SELLER DISCLAIM ANY LIABILITY FOR CONSEQUENTIAL, EXEMPLARY, SPECIAL OR INDIRECT DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT. BASF and the Seller offer this product, and the Buyer and User accept it, subject to the foregoing Conditions of Sale and Warranty which may be varied only by agreement in writing signed by a duly authorized representative of BASF . 1108 Referenced Pesticides (Name, Reg . No ., Active) Ally® herbicide, 279-9575, Metsulfuron Methyl Armezon® herbicide, 7969-262, Topramezone Armezon® PRO herbicide, 7969-372, Topramezone, Dimethenamid Basagran® 5L herbicide, 7969-112, Bentazon Beyond® herbicide, 7969-441, Imazamox Clearmax® herbicide, 7969-238, Imazamox, MCPA Distinct ® herbicide, 7969-150, Dicamba, Diflufenzopyr Drive® XLR8 herbicide, 7969-272, Quinclorac EverdantTM herbicide, 7969-479, Dicamba Express® herbicide, 279-9578, Tribenuron Methyl Facet® L herbicide, 7969-315, Quinclorac Finesse® herbicide, 279-9576, Chlorsulfuron, Metsulfuron Mehtyl Gramoxone® SL herbicide, 100-1652, Paraquat © 2023 BASF Corporation All rights reserved . 007969-00479 .20230907 .NVA 2023-04-0647-0139 Supersedes: NVA 2020-04-647-0162 BASF Corporation 26 Davis Drive Research Triangle Park, NC 27709 Lorsban® insecticide, 62719-34, Chlorpyrifos Outlook® herbicide, 7969-156, Dimethenamid Pendulum® AquaCap (add to page 23?) herbicide , 241-416, Pendimethalin Prowl® H2O herbicide, 241-418, Pendimethalin Pursuit® herbicide, 241-310, Imazethapyr Raptor® herbicide, 241-379, Imazamox Roundup® herbicide, 524-549, Glyphosate Select Max® herbicide, 59639-132, Clethodim Sharpen® powered by Kixor® herbicide, 7969-278, Saflufenacil Tower® herbicide, 7969-239, Dimethenamid Varisto® herbicide, 241-447 , Bentazon/Imazamox Verdict® powered by Kixor® herbicide, 7969-279, Dimethenamid/Saflufenacil Zidua® herbicide, 7969-338, Pyroxasulfone Zidua® PRO powered by Kixor® herbicide, 7969-365, Saflufenacil/Pyroxasulfone Armezon, Basagran, Beyond, Clearfield , Clearmax, Distinct, Drive, Facet, Kixor, Outlook, Pendulum, Prowl, Pursuit, Raptor, Sharpen, Tower, Varisto, Verdict, and Zidua are registered trademarks of BASF. Everdant is a trademark of BASF. Ally, Express, and Finesse are registered trademarks of DuPont Crop Protection. Gramoxone is a registered trademark of a Syngenta Group Company. Lorsban is a registered trademark of Dow AgroSciences LLC. Roundup is a registered trademark of Monsanto Technology LLC. Select Max is a registered trademark of Valent U.S.A. Corporation.