crop-chem-docs/corpus/epa_ppls/7969-501.md

Surtain Herbicide

• EPA Reg No: 7969-501
• Registrant: BASF AGRICULTURAL SOLUTIONS US, LLC
• Signal word: Caution
• Active ingredients: Pyroxasulfone (10.91%); Saflufenacil (6.82%)
• Label accepted: 2025-05-16
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/007969-00501-20250516.pdf

---

May 16, 2025 Craig Kleppe craig.kleppe@basf.com BASF AGRICULTURAL SOLUTIONS US LLC Subject: Non-PRIA (Pesticide Registration Improvement Act) Labeling Amendment - Modified crop rotation intervals and corrected maximum cumulative use rate statements on label Product Name: Surtain Herbicide Admin Number: 7969-501 EPA Receipt Date: 11/12/2024 Action Case Number: 00637510 Dear Craig Kleppe: The amended labeling referred to above, submitted in connection with registration under the Federal Insecticide, Fungicide, and Rodenticide Act, as amended, is acceptable. This approval does not affect any terms or conditions that were previously imposed on this registration. You continue to be subject to existing terms or conditions on your registration and any deadlines connected with them. A stamped copy of your labeling is enclosed for your records. This labeling supersedes all previously accepted labeling. The next label printing of this product must use this labeling unless subsequent changes You must submit one (1) copy of the final printed labeling before you release thishave been approved. product for shipment with the new labeling. In accordance with 40 CFR § 152.130(c), you may distribute or sell this product under the previously approved labeling for 18 months from the date of this letter. After 18 months, you may only distribute or sell this product if it bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR § 152.3. Should you wish to add/retain a reference to your company’s website on your label, then please be aware that the website becomes labeling under FIFRA and is subject to review by EPA. If the website is false or misleading, the product will be considered to be misbranded and sale or distribution of the product is unlawful under FIFRA section 12(a)(1)(E). 40 CFR § 156.10(a)(5) lists examples of statements the EPA may consider false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims made on the website may not substantially differ from those claims approved through the registration process. Therefore, should the EPA find or if it is brought to our attention that a website contains statements or claims substantially differing from statements or claims made in connection with obtaining a FIFRA section 3 registration, the website will be referred to the EPA’s Office of Enforcement and Compliance Assurance. Your release for shipment of this product constitutes acceptance of these terms. If these terms are not complied with, this registration will be subject to cancellation in accordance with FIFRA section 6.

If you have questions, please contact Robert Mitchell via email at mitchell.robert@epa.gov. Sincerely, Kable Bo Davis, Senior Advisor HB, RD Office of Pesticide Programs Kable Bo Davis

For residual preemergence weed control in field corn Active Ingredients*: saflufenacil: N'-[2-chloro-4-fluoro-5-(3-methyl-2,6-dioxo-4-(trifluoromethyl)-3, 6-dihydro-1(2H)-pyrimidinyl)benzoyl]-N-isopropyl-N-methylsulfamide . . . . . . . . . 6 .82% pyroxasulfone: 3-[[[5-(difluoromethoxy)-1-methyl-3-(trifluoromethyl)- 1H-pyrazol-4-yl]methyl]sulfonyl]-4,5-dihydro-5,5-dimethylisoxazole . . . . . . . . . . 10 .91% Other Ingredients: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 .27% Total: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 .00%

• Contains 0 .626 pound of saflufenacil formulated as a water-based capsule suspension mixed with 1 .002 pounds of pyroxasulfone per gallon formulated as a water-based suspension concentrate EPA Reg. No. 7969-501 EPA Est. No. KEEP OUT OF REACH OF CHILDREN CAUTION/PRECAUCIÓN Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle . (If you do not understand the label, find someone to explain it to you in detail .) See inside for complete First Aid, Precautionary Statements, Directions For Use, Conditions of Sale and Warranty, and state-specific crop and/or use site restrictions . In case of an emergency endangering life or property involving this product, call day or night 1-800-832-HELP (4357). [Alternate text: Shake container well before use. Recirculation is advised for bulk tanks or totes.] Net Contents: BASF Corporation 26 Davis Drive, Research Triangle Park, NC 27709 Saflufenacil Group 14 Herbicide Pyroxasulfone Group 15 Herbicide 05/16/2025 7969-501

2 Precautionary Statements Hazards to Humans and Domestic Animals CAUTION. Harmful if swallowed or if inhaled . Avoid breathing spray mist . Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco, or using the toilet . Remove and wash contaminated clothing before reuse . Personal Protective Equipment (PPE) Applicators and other handlers must wear: • Long-sleeved shirt and long pants • Shoes plus socks • Chemical-resistant gloves made of barrier laminate, butyl rubber ≥ 14 mils, nitrile rubber ≥ 14 mils, neoprene rubber ≥ 14 mils, natural rubber ≥ 14 mils, polyethylene, polyvinyl chloride ≥ 14 mils, or Viton ≥ 14 mils For aerial application, mixers and loaders must also wear a minimum of a NIOSH approved filtering face piece respira - tor with any N filter (TC-84A) . You can also use other NIOSH approved particulate respirators that offer more protection, including a half face or full face respirator with any filter or a powered air purifying respirator with an HE filter . For more information about these options, see www .epa .gov/pesticide-respirators . Follow the manufacturer’s instructions for cleaning and maintaining PPE . If no such instructions for washables exist, use detergent and hot water . Keep and wash PPE separately from other laundry . Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product’s concentrate . DO NOT reuse them . Engineering Controls When handlers use closed systems, enclosed cabs, or air - craft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesti- cides [40 CFR 170 .607(d-f)], the handler PPE requirements may be reduced or modified as specified in the WPS . USER SAFETY RECOMMENDATIONS Users should: • Remove clothing/PPE immediately if pesticide gets inside . Then wash thoroughly and put on clean cloth- ing . If pesticide gets on skin, wash immediately with soap and water . • Remove PPE immediately after handling this product . Wash the outside of gloves before removing . As soon as possible, wash thoroughly and change into clean clothing . Environmental Hazards DO NOT apply directly to water, areas where surface water is present, or intertidal areas below the mean high water mark . DO NOT contaminate water when disposing of equipment washwater or rinsate . Drift and runoff may be hazardous to aquatic organisms in water adjacent to treat- ed areas . Groundwater Advisory. Saflufenacil and pyroxasulfone have properties and characteristics associated with chemi - cals detected in groundwater . These chemicals may leach into groundwater if used in areas where soils are perme - able, particularly where the water table is shallow . FIRST AID If swallowed • Call a poison control center or doctor immediately for treatment advice . • DO NOT induce vomiting unless told to by a poison control center or doctor . • Have a person sip a glass of water if able to swallow . • DO NOT give anything to an unconscious person . If inhaled • Move person to fresh air . • If person is not breathing, call 911 or an ambulance; then give artificial respiration, preferably by mouth to mouth, if possible . • Call a poison control center or doctor for further treatment advice . If in eyes • Hold eyes open and rinse slowly and gently with water for 15 to 20 minutes . • Remove contact lenses, if present, after the first 5 minutes; then continue rinsing . • Call a poison control center for treatment advice . If on skin • Take off contaminated clothing . • Rinse skin immediately with plenty of water for 15 to 20 minutes . • Call a poison control center or doctor for treatment advice . HOTLINE NUMBER Have the product container or label with you when calling a poison control center or doctor or going for treatment . You may also contact BASF Corporation for emergency medical treatment information: 1-800-832-HELP (4357) .

3 Surface Water Advisory. This product may impact sur- face water quality due to runoff of rainwater . This is especially true for poorly draining soils and soils with shal - low groundwater . This product is classified as having high potential for reaching surface water via runoff for several months or more after application . A level, well-maintained buffer strip between areas to which this product is applied and surface water features including ponds, streams, and springs will reduce the potential loading of saflufenacil, pyroxasulfone, and pyroxasulfone’s degradation product, [5-(difluoromethoxy)-1-methyl-3-(trifluoromethyl)-1H- pyrazol-4-yl]methanesulfonic acid (M1), from runoff water and sediment . Runoff of this product will be reduced by avoiding application when rainfall is forecast to occur with - in 48 hours . Point-source Contamination. To prevent point-source contamination, DO NOT mix or load this or any other pes- ticide product within 50 feet of wells (including abandoned wells and drainage wells), sinkholes, perennial or intermit- tent streams and rivers, and natural or impounded lakes and reservoirs . This setback does not apply to properly capped or plugged abandoned wells and does not apply to impervious pad or dike mixing/loading areas described as follows . Mixing, loading, rinsing, or washing operations performed within 50 feet of a well are allowed only when conducted on an impervious pad constructed to withstand the weight of the heaviest load that may be on or move across the pad . The pad must be self-contained to prevent surface water flow over or from the pad . The pad capacity must be maintained at 110% that of the largest pesticide container or application equipment used on the pad and have suffi - cient capacity to contain all product spills, equipment or container leaks, equipment washwater, and rainwater that may fall on the pad . The containment capacity does not apply to vehicles delivering pesticide shipments to the mix - ing and/or loading site . States may have in effect additional requirements regarding wellhead setbacks and operational containment . Care must be taken when using this product to prevent: • Back-siphoning into wells • Spills • Improper disposal of excess pesticide, spray mixes, or rinsates Check valves or anti-siphoning devices must be used on all mixing equipment . Endangered Species Protection Requirements This product may have effects on federally listed threat- ened or endangered plant species or their critical habitat . When using this product, you must follow the measures contained in the Endangered Species Protection Bulletin for the county or parish in which you are applying the pes - ticide . To determine whether your county or parish has a Bulletin, and to obtain that Bulletin, consult http://www .epa .gov/espp/, or call 1-844-447-3813 no more than 6 months before using this product . Applicators must use Bulletins that are in effect in the month in which the pesticide will be applied . New Bulletins will be available from the above sources 6 months before their effective dates . Directions For Use It is a violation of federal law to use this product in a man- ner inconsistent with its labeling . This label must be in the possession of the user at time of herbicide application . DO NOT apply this product in a way that will contact workers or other persons, either directly or through drift . Only protected handlers may be in the area during applica - tion . For any requirements specific to your state or tribe, consult the agency responsible for pesticide regulation . Observe all restrictions and precautions in this label and the labels of products used in combination with SurtainTM herbicide . The use of this product not consistent with this label can result in injury to crops, animals, or persons . Keep containers closed to avoid spills and contamination . BASF Corporation does not recommend or authorize the use of this product in manufacturing, processing, or pre - paring custom blends with other products for application in crops .

4 AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170 . This standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides . It contains requirements for training, decontamination, notification, and emergency assistance . It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted-entry interval . The requirements in this box only apply to uses of this prod- uct that are covered by the Worker Protection Standard . DO NOT enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 12 hours . EXCEPTION: If the product is soil injected or soil incor- porated, the Worker Protection Standard, under certain circumstances, allows workers to enter the treated area if there will be no contact with anything that has been treated . PPE required for early entry to treated areas that is per- mitted under the Worker Protection Standard and that involves contact with anything that has been treated, including plants, soil, or water, is: • Coveralls • Chemical-resistant gloves made of barrier laminate, butyl rubber ≥ 14 mils, nitrile rubber ≥ 14 mils, neoprene rubber ≥ 14 mils, natural rubber ≥ 14 mils, polyethylene, polyvinyl chloride ≥ 14 mils, or Viton ≥ 14 mils • Shoes plus socks STORAGE AND DISPOSAL DO NOT contaminate water, food, or feed by storage or disposal . Open dumping is prohibited . Pesticide Storage DO NOT use or store near heat or open flame . Store in original container in a well ventilated area separately from fertilizer, feed, or foodstuffs and away from other pesticides . Avoid cross-contamination with other pesti- cides . Groundwater contamination may be reduced by diking and flooring of permanent liquid bulk storage sites with an impermeable material . Pesticide Disposal Wastes resulting from this product must be disposed of on-site or at an approved waste disposal facility . Improp- er disposal of excess pesticide, spray mix, or rinsate is a violation of federal law . If these wastes cannot be dis- posed of according to label instructions, contact the state agency responsible for pesticide regulation or the Hazardous Waste representative at the nearest EPA Regional Office for guidance . Container Handling Nonrefillable Container. DO NOT reuse or refill this container . Triple rinse or pressure rinse container (or equivalent) promptly after emptying; then offer for recy - cling, if available, or reconditioning, if appropriate, or puncture and dispose of in a sanitary landfill, or by incin - eration, or by other procedures approved by state and local authorities . Triple rinse containers small enough to shake (capacity ≤ 5 gallons) as follows: Empty the remain- ing contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip . Fill the container 1/4 full with water and recap . Shake for 10 seconds . Pour rinsate into application equipment or a mix tank, or store rinsate for later use or disposal . Drain for 10 seconds after the flow begins to drip . Repeat this procedure two more times . Triple rinse containers too large to shake (capacity > 5 gallons) as follows: Empty the remain- ing contents into application equipment or a mix tank . Fill the container 1/4 full with water . Replace and tighten closures . Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds . Stand the container on its end and tip it back and forth several times . Turn the container over onto its other end and tip it back and forth several times . Empty the rinsate into application equipment or a mix tank, or store rinsate for later use or disposal . Repeat this procedure two more times . (continued)

5 STORAGE AND DISPOSAL (continued) Container Handling (continued) Pressure rinse as follows: Empty the remaining con- tents into application equipment or mix tank and continue to drain for 10 seconds after the flow begins to drip . Hold container upside down over application equipment or mix tank, or collect rinsate for later use or disposal . Insert pressure rinsing nozzle in the side of the container and rinse at about 40 PSI for at least 30 sec - onds . Drain for 10 seconds after the flow begins to drip . Refillable Container. Refill this container with pesticide only . DO NOT reuse this container for any other pur- pose . Triple rinsing the container before final disposal is the responsibility of the person disposing of the contain - er . Cleaning before refilling is the responsibility of the refiller . Triple rinse as follows: To clean the container before final disposal, empty the remaining contents from this container into application equipment or mix tank . Fill the container about 10% full with water . Agitate vigorously or recirculate water with the pump for 2 minutes . Pour or pump rinsate into application equipment or rinsate col - lection system . Repeat this rinsing procedure two more times . When this container is empty, replace the cap and seal all openings that have been opened during use; return the container to the point of purchase or to a designated location . This container must only be refilled with a pesti- cide product . Prior to refilling, inspect carefully for damage including cracks, punctures, abrasions, worn out threads and closure devices . Check for leaks after refilling and before transport . DO NOT transport if this container is damaged or leaking . If the container is damaged, or leaking, or obsolete and not returned to the point of pur- chase or to a designated location, triple rinse emptied container and offer for recycling, if available, or dispose of container in compliance with state and local regulations . In Case of Emergency In case of large-scale spill of this product, call: • CHEMTREC 1-800-424-9300 • BASF Corporation 1-800-832-HELP (4357) In case of medical emergency regarding this product, call: • Your local doctor for immediate treatment • Your local poison control center (hospital) or hotline at 1-800-222-1222 • BASF Corporation 1-800-832-HELP (4357) Steps to take if material is released or spilled: • Dike and contain the spill with inert material (sand, earth, etc .) and transfer liquid and solid diking material to sepa - rate containers for disposal . • Remove contaminated clothing and wash affected skin areas with soap and water . • Wash clothing before reuse . • Keep the spill out of all sewers and open bodies of water . Product Information SurtainTM herbicide provides rate-dependent residual preemergence control of annual grass weeds, sedges, and annual broadleaf weeds (including biotypes resistant to ACCase inhibitors, ALS inhibitors, HPPD inhibitors, PSII inhibitors, and glyphosate) (refer to Table 1 for list) . It can be used in field corn (grain, seed, silage), fallow, and post- harvest croplands . Periods of dry weather following application of Surtain may reduce herbicidal effectiveness . Residual preemergence application of Surtain must be activated by at least 1/2 inch of rainfall or sprinkler irrigation before weed seedling emergence . When Surtain is not activated, a labeled postemergence herbicide or cultivation may be needed to control weed escapes . Surtain does not con- trol emerged weeds . Herbicidal activity of Surtain may be reduced if excessive trash from the previous crop covers the soil surface during application . Manage trash levels if needed with combine straw shredder/spreaders, earlier burndown of emerged weeds, or light tillage .

6 Table 1. Weeds Controlled by a Residual Preemergence Application of SurtainTM herbicide Common Name Scientific Name C = Control S = Suppression1 Annual Broadleaf Weeds Amaranth, Palmer Amaranthus palmeri C Amaranth, Powell Amaranthus powellii C Beggarweed, Florida Desmodium tortuosum C Buckwheat, wild Polygonum convolvulus C Burcucumber Sicyos angulatus S Canola, volunteer (rapeseed), all types Brassica spp . C Carpetweed Mollugo verticillata C Chickweed, common Stellaria media C Cocklebur, common Xanthium strumarium C Copperleaf, Virginia Acalypha virginica C Galinsoga, smallflower Galinsoga parviflora C Groundcherry, cutleaf Physalis angulata C Groundsel, common Senecio vulgaris S Henbit Lamium amplexicaule S Horseweed (marestail) Conyza canadensis C Jimsonweed Datura stramonium C Kochia Kochia scoparia C Ladysthumb Polygonum persicaria C Lambsquarters, common Chenopodium album C Mallow, Venice Hibiscus trionum C Marestail (horseweed) Conyza canadensis C Morningglory, entireleaf Ipomoea hederacea var . integriuscula C Morningglory, ivyleaf Ipomoea hederacea C Morningglory, pitted Ipomoea lacunosa C Morningglory, tall Ipomoea purpurea C Mustard, wild Sinapis arvensis C Nightshade, black Solanum nigrum C Nightshade, cutleaf Solanum triflorum C Nightshade, Eastern black Solanum ptycanthum C Nightshade, hairy Solanum sarrachoides C Pennycress, field Thlaspi arvense C Pigweed, prostrate Amaranthus blitoides C Pigweed, redroot Amaranthus retroflexus C Pigweed, smooth Amaranthus hybridus C Pigweed, tumble Amaranthus albus C Puncturevine Tribulus terrestris S Purslane, common Portulaca oleracea C Pusley, Florida Richardia scabra C Ragweed, common Ambrosia artemisiifolia C Ragweed, giant Ambrosia trifida C Shepherds-purse Capsella bursa-pastoris S Sida, prickly Sida spinosa C Smartweed, Pennsylvania Polygonum pensylvanicum C Sowthistle, annual Sonchus arvensis C Starbur, bristly Acanthospermum hispidum C Sunflower, common Helianthus annuus C (continued)

7 Table 1. Weeds Controlled by a Residual Preemergence Application of SurtainTM herbicide (continued) Common Name Scientific Name C = Control S = Suppression1 Annual Broadleaf Weeds (continued) Texasweed Caperonia palustris C Thistle, Russian Salsola kali C Velvetleaf Abutilon theophrasti C Waterhemp Amaranthus tuberculatus C Annual Grass Weeds Barley, hare Hordeum murinum spp . leporinum C Barnyardgrass Echinochloa crus-galli C Bluegrass, annual Poa annua C Brome, downy Bromus tectorum C Brome, Japanese Bromus japonicus S Canarygrass Phalaris canariensis C Cheat Bromus secalinus S Crabgrass, large Digitaria sanguinalis C Crabgrass, smooth Digitaria ischaemum C Crowfootgrass Dactyloctenium aegyptium C Cupgrass, Southwestern Eriochloa gracilis C Cupgrass, woolly Eriochloa villosa S Foxtail, giant Setaria faberi C Foxtail, green Setaria viridis C Foxtail, yellow Setaria pumila C Goosegrass Eleusine indica C Johnsongrass (seedling) Sorghum halepense S Millet, Texas Urochloa texana S Millet, wild proso Panicum miliaceum S Oat, wild Avena fatua S Panicum, fall Panicum dichotomiflorum C Rice, red Oryza sativa C Ryegrass, Italian Lolium multiflorum C Ryegrass, rigid Lolium rigidum C Sandbur Cenchrus spp . S Shattercane Sorghum bicolor S Signalgrass, broadleaf Brachiaria platyphylla S Sedges Flatsedge, rice Cyperus iria C Nutsedge, yellow Cyperus esculentus S 1 Surtain must be used in tank mixes or sequential applications with other labeled herbicides that provide additional control of noted weeds . Mode of Action Surtain contains two active herbicide ingredients . Saflufenacil is a potent inhibitor of protoporphyrin- ogenoxidase belonging to herbicide mode-of-action Group 14 . Pyroxasulfone is a potent inhibitor of very long chain fatty acid (VLCFA) synthesis, belonging to herbicide mode-of-action Group 15 . Saflufenacil is rapidly absorbed by roots and foliage . Following inhibition of the protoporphyrinogen-oxidase, plant death is the result of membrane damage . Under active growing conditions, sus- ceptible emerging weed seedlings usually develop chlorotic and necrotic injury symptoms within hours and die within a few days . Susceptible germinating weed seeds usually die as they reach the soil surface or shortly after emergence . Pyroxasulfone is a root-and-shoot inhibitor that controls susceptible weed seedlings before or soon after they emerge from the soil . Herbicide Resistance Management For resistance management, Surtain contains both a Group 14 herbicide and Group 15 herbicide . Any weed population may contain plants naturally resistant to

8 Group 14 and/or Group 15 herbicides . The resistant indi- viduals may dominate the weed population if these herbicides are used repeatedly in the same fields . Appropri- ate resistant-management strategies should be followed . To delay herbicide resistance consider: • Avoiding the consecutive use of herbicides that have a similar target-site-of-action on the same weed species . • Using tank mixes or premixes with herbicides from different target-site-of-action groups as long as the involved products are all registered for the same use, have different sites of action, and are both effective at the tank mix or prepack rate on the weed(s) of concern . • Basing herbicide use on a comprehensive IPM (Integrated Pest Management) program including cultural and mechanical methods . • Monitoring treated weed populations for loss of field effi - cacy, and control of escapes with effective alternative herbicides or mechanical methods . • Identify weeds present in the field through scouting and field history and understand their biology . The weed- control program needs to consider all of the weeds present . • Scout fields prior to application to identify the weed spe - cies present and their growth stage to determine if the intended application will be effective . • Scout fields after application to verify the treatment was effective . • Suspected herbicide-resistance weeds may be identified by these indicators: 1 . Failure to control a weed species normally controlled by the herbicide at the dose applied, especially if con - trol is achieved on adjacent weeds; 2 . A spreading patch of non-controlled plants of a partic- ular weed species; or 3 . Surviving plants mixed with controlled individuals of the same species . • If resistance is suspected, treat weed escapes with a herbicide with a different MOA and/or use non-chemical methods to remove escapes, as practicable, with the goal of preventing further seed production . • Report any incidence of non-performance of this product against a particular weed species to your BASF representative . • Contacting your local extension specialist, certified crop advisors, and/or manufacturer for herbicide resistance management and/or integrated weed management directions for specific crops and resistant weed biotypes . Crop Response Crops listed on this label are tolerant to SurtainTM herbicide when applied according to label directions and under normal environmental conditions . Crop injury may occur when application is made under stressful growing conditions (e .g . mechanical injury, drought or excessive moisture for normal crop development, extreme hot or cold temperatures, widely fluctuating temperatures, seed - ling disease, low soil fertility, high soil pH, high soil salt concentration, or other pesticide injury) . Application Instructions Surtain may be applied before or after crop emergence . Application Rate Application rates of Surtain may vary depending on soil texture and organic matter . Refer to Table 2 for soil texture groups used in this label . Table 2. Soil Texture Groups Coarse Medium Fine Sand Loamy sand Sandy loam Silt Silt loam Loam Sandy clay loam Sandy clay Silty clay Silty clay loam Clay loam Clay Use Table 3 to determine the corresponding amounts of active ingredients (saflufenacil, pyroxasulfone) from Surtain product use rates . Table 3. Use Rate Equivalency Amount of Surtain (fl ozs/A) Amount of Saflufenacil (lb ai/A) Amount of Pyroxasulfone (lb ai/A) 9 .2 0 .045 0 .072 11 .0 0 .054 0 .086 14 .0 0 .068 0 .110 17 .0 0 .083 0 .133 27 .0 0 .132 0 .211 Application Timing Surtain may be applied preplant surface, preplant incor- porated, preemergence, or early postemergence . Refer to the Crop-specific Information section for specific appli- cation instructions (timings, rates, restrictions and precautions) by crop . Preplant Surface Application. Apply Surtain alone or in tank mix within 30 days of planting . If weeds are present at the time of application, use additional weed control methods, for example a tank mix with an appropriate postemergence herbicide(s), to control emerged weeds . Preplant Incorporated (PPI) Application. Incorporate Surtain into the upper (1 to 2 inches) soil surface within 14 days of planting . Deeper incorporation may increase the potential for crop injury and also may result in reduced weed control . Use appropriate equipment for uniform shal- low incorporation, including a field cultivator, harrow, rolling cultivator, or finishing disc . Preemergence Surface Application. After planting and before crop emergence, apply a uniform broadcast treat- ment to the soil surface . Apply Surtain only to a uniform seedbed which is firm and free of clods, cracks, excess trash (previous crop residue), and weed growth . If weeds are present, apply Surtain in a tank mix with an

9 appro priate postemergence herbicide, for example a glyphosate-containing product . Early Postemergence Application. SurtainTM herbicide must be applied and activated before weed seedling emergence or in a tank mixture that controls emerged weeds . Surtain will not control emerged weeds . Weeds that are already emerged at the time of application must be controlled with cultivation, tank mix or sequential application of another herbicide labeled for postemergence control of the target weeds in the crop . Application Methods and Equipment Surtain may be applied by ground or air (fixed-wing air- craft only, DO NOT apply by helicopter) . Thorough spray coverage is required for optimum weed control and can be improved with proper adjuvant, nozzle, and spray volume selection . Use and configure application equipment to provide an adequate spray volume, an accu- rate and uniform distribution of spray droplets over the treated area, and to avoid spray drift to nontarget areas . Adjust equipment to maintain continuous agitation during spraying with good mechanical or bypass agitation . Avoid overlaps that increase rates above the use rates specified in this label . Surtain may be applied using water or sprayable fluid nitrogen fertilizer solutions as the spray carrier . Additionally, Surtain may be impregnated on and applied with dry bulk fertilizer . Aerial Spray Carrier Volume. Use 3 or more gallons of water per acre . The actual minimum spray volume per acre is determined by the spray equipment used . Use adequate spray volume to provide accurate and uniform distribution of spray particles over the treated area . Ground Spray Carrier Volume. Use 3 or more gallons of water per treated acre or 20 or more gallons of sprayable fluid nitrogen fertilizer per treated acre . Mandatory Spray Drift Management Aerial Applications • DO NOT release spray at a height greater than 10 ft above the ground or crop canopy, unless a greater application height is necessary for pilot safety . • Applicators are required to select a nozzle and pres - sure that deliver a medium or coarser droplet size (ASABE S572) . • When applying by airplane, use low-drift nozzles (straight-stream nozzles, D-8 or larger) . DO NOT use nozzles producing a mist droplet spray . • The boom length must not exceed 75% of the wing- span for airplanes . • Applicators must use 1/2 swath displacement upwind at the downwind edge of the field . • Nozzles must be oriented so spray is directed towards the back of the aircraft, parallel with the airstream, and never point downward more than 45 degrees . (continued) Mandatory Spray Drift Management (continued) Aerial Applications (continued) • DO NOT apply when wind speeds exceed 10 mph at the application site . • DO NOT apply during temperature inversions . Ground Applications • Apply with the nozzle height recommended by the manufacturer, but no more than 3 ft above the ground or crop canopy . • Applicators are required to select a nozzle and pres - sure that deliver a medium or coarser droplet size (ASABE S572) . Flood-jet type nozzles are recommend- ed for residual soil surface application . Nozzles that deliver coarse spray droplets may be used to reduce spray drift provided spray volume per acre (GPA) is increased to maintain coverage of target (i .e . soil sur- face) . DO NOT use nozzles that produce fine (e .g . cone) spray droplets . • DO NOT apply when wind speeds exceed 10 mph at the application site . • DO NOT apply during temperature inversions . Buffer Restrictions Aerial Applications To avoid potential adverse effects to nontarget areas, applicators must maintain a 160-foot buffer between the application area and the closest downwind edge of nontarget terrestrial habitats (including grasslands, forested areas, shelter belts, woodlots, hedgerows, riparian areas, shrub lands, and crop lands) . Ground Applications To avoid potential adverse effects to nontarget areas, applicators must maintain a 75-foot buffer between the application area and the closest downwind edge of nontarget terrestrial habitats (including grasslands, forested areas, shelter belts, woodlots, hedgerows, riparian areas, shrub lands, and crop lands) . Spray Drift Advisories The applicator is responsible for avoiding off-site spray drift . Be aware of nearby nontarget sites and environmen- tal conditions . Importance of Droplet Size An effective way to reduce spray drift is to apply large droplets . Use the largest droplets that provide target pest control . While applying larger droplets will reduce spray drift, the potential for drift will be greater if applications are made improperly or under unfavorable environmental conditions . Controlling Droplet Size - Ground Boom Volume Volume. Increasing the spray volume so that larger drop- lets are produced will reduce spray drift . Use the highest practical spray volume for the application . If a greater spray

10 volume is needed, consider using a nozzle with a higher flow rate . Pressure. Use the lowest spray pressure recommended for the nozzle to produce the target spray volume and droplet size . Spray Nozzle. Use a spray nozzle that is designed for the intended application . Consider using nozzles designed to reduce drift . Controlling Droplet Size - Aircraft Adjust Nozzles Follow nozzle manufacturers recommendations for setting up nozzles . Generally, to reduce fine droplets, nozzles must be oriented parallel with the airflow in flight . Boom Height - Ground Boom Use the lowest boom height that is compatible with the spray nozzles that will provide uniform coverage . For ground equipment, the boom must remain level with the crop and have minimal bounce . Release Height - Aircraft Higher release heights increase the potential for spray drift . When applying aerially to crops, DO NOT release spray at a height greater than 10 feet above the crop canopy, unless a greater application height is necessary for pilot safety . Shielded Sprayers Shielding the boom or individual nozzles can reduce spray drift . Consider using shielded sprayers . Verify that the shields are not interfering with the uniform deposition of the spray on the target area . Temperature and Humidity When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation . Temperature Inversion Drift potential is high during a temperature inversion . Tem- perature inversions are characterized by increasing temperature with altitude and are common on nights with limited cloud cover and light to no wind . The presence of an inversion can be indicated by ground fog or by the movement of smoke from a ground source or an aircraft smoke generator . Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing . Wind Drift potential generally increases with wind speed . AVOID APPLICATIONS DURING GUSTY WIND CONDITIONS. Applicators need to be familiar with local wind patterns and terrain that could affect spray drift . Ground Application (dry bulk fertilizer) SurtainTM herbicide may be impregnated or coated onto dry bulk granular fertilizer carriers for residual soil surface application . Impregnation or coating may be conducted by in-plant bulk or on-board systems . Perform the mixing operation in well-ventilated areas . Addition of a drying agent may be necessary if the fertilizer and herbicide blend is too wet for uniform application because of high humidity, high urea concentration, or low fertilizer use rate . Slowly add the drying agent to the blend until a flowable mixture is obtained . Drying agents are not recommended for use with on-board impregnation systems . Under some conditions, fertilizer impregnated with Surtain may clog air tubes or deflector plates on pneumatic appli - cation systems . Mineral oil may be added to Surtain before blending with fertilizer to reduce plugging . DO NOT use drying agents when mineral oil is used . To avoid sepa- ration of Surtain and mineral oil mixes in cold temperatures, keep mixture heated or agitated before blending with fertilizer . Mineral oil may be used at in-plant blending stations or on-board injection systems . Generally, fertilizer application rates of at least 200 lbs to 700 lbs per acre of herbicide and fertilizer blend provide adequate distribution or coverage for Surtain across the soil surface . Refer to Table 5 in this label for use rates of Surtain to be applied on per acre basis when impregnat- ed with fertilizer to create the dry bulk fertilizer blend for application . Apply uniformly to the soil to prevent possible crop injury and offer satisfactory weed control . Impregnat- ed fertilizer spread at 1/2 rate and overlapped for a full rate offer a more uniform distribution . Use shallow (less than 2 inches) incorporation for improved weed control . Deeper incorporation dilutes the herbicide layer near the soil sur - face and may result in unsatisfactory weed control . To calculate the herbicide rate when using dry bulk fertiliz- er applications: fl ozs herbicide per acre x 2000 = fl ozs herbicide per ton of fertilizerpounds fertilizer per acre Cleaning Spray Equipment Clean application equipment thoroughly by using a strong detergent or commercial sprayer cleaner according to the manufacturer’s directions, followed by triple rinsing the equipment before and after applying this product . Additives Surtain is formulated to provide optimal residual pre- emergence weed control . No additive is needed when Surtain is applied alone . However, several herbicide tank mixes with Surtain may require an adjuvant to improve burndown of emerged weeds . Therefore, depending on the timing of application relative to crop emergence, the following adjuvants may be used with Surtain tank mixes: For applications made before crop emergence (i .e ., pre- plant surface, preplant incorporated, or preemergence): non-ionic surfactant (NIS), crop oil concentrate (COC), high surfactant petroleum oil concentrate/blends (HSPOC), methylated seed oil (MSO), high surfactant methylated oil concentrate (HSMOC), urea ammonium nitrate (UAN) .

11 For applications made after crop emergence (i .e ., early postemergence): NIS at 0 .25% v/v (1 qt/100 gal) optionally with a spray grade ammonium sulfate (AMS) at 8 .5 to 17 lbs/100 gallons of water . If using liquid AMS product, use a rate that delivers an AMS equivalent of 8 .5 to 17 lbs/100 gallons of water . The use of COC or HSPOC may result in temporary crop injury . DO NOT add MSO or HSMOC or UAN to a SurtainTM herbicide spray mix . When an adjuvant is to be used with this product, BASF recommends the use of a Chemical Producers and Distributors Association (CPDA) certified adjuvant . DO NOT add acidifying agents to the spray tank when applying Surtain . Tank Mixing Information It is the pesticide user’s responsibility to ensure that all products in the mixtures are registered for the intended use . Read and follow the applicable restrictions and limita - tions and directions for use on all product labels involved in tank mixing . Users must follow the most restrictive direc- tions for use and precautionary statements of each product in the tank mixture . Surtain may be tank mixed or applied sequentially with other herbicide products registered for use in any labeled crop found in this label for a broader spectrum of residual weed control and/or control of emerged weeds . Refer to the tank mix product labels to confirm that the respective tank mix products are registered for use on the labeled crop . Read and follow tank mix product labels for applica - tion instructions, use restrictions and precau tions, and rotational cropping guidance . Compatibility Test for Mix Components Before mixing components, always perform a compatibility jar test . 1 . For 20 gallons per acre spray volume, use 3 .3 cups (800 mL) of water . For other spray volumes, adjust rates accordingly . Only use water from the intended source at the source temperature . 2 . Add components in the sequence indicated in the Mixing Order section using 2 teaspoons for each pound or 1 teaspoon for each pint of labeled use rate per acre . 3 . Always cap the jar and invert 10 cycles between com- ponent additions . 4 . When the components have all been added to the jar, let the solution stand for 15 minutes . 5 . Evaluate the solution for uniformity and stability . The spray solution must not have free oil on the surface, or fine particles that precipitate to the bottom, or thick (clabbered) texture . If the spray solution is not compati- ble, repeat the compatibility test with the addition of a suitable compatibility agent . If the solution is then com- patible, use the compatibility agent as directed on its label . If the solution is still incompatible, DO NOT mix the ingredients in the same tank . Mixing Order Maintain constant agitation throughout mixing and applica - tion until spraying is completed . 1 . Water - Fill tank 1/2 to 3/4 full with clean water and start agitation . 2 . Inductor - If an inductor is used, rinse it thoroughly after each component has been added . 3 . Products in PVA bags - Place any product contained in water-soluble PVA bags into the mixing tank . Wait until all water-soluble PVA bags have fully dissolved and the product is evenly mixed in the spray tank before continuing . 4 . Products that are formulated as Wettable Powders, Dry Flowables, and Water Dispersible Granules - Add to tank and allow to fully dissolve . 5 . Water-soluble additives (including dry and liquid fer- tilizers AMS or UAN) 6 . Surtain - Add at this point in tank mix preparation process . 7 . Water-dispersible liquid products (suspension con- centrates and suspo-emulsions, including atrazine-, mesotrione-, topramezone-based products) 8 . Water-soluble products (including certain glyphosate formulated products) 9 . Emulsifiable Concentrates 10 . Adjuvants (including NIS, COC/HSPOC, MSO/HSMOC) 11 . Remaining quantity of water If the spray mixture is allowed to settle for any period of time, thorough agitation is essential to resuspend spray mixture before spraying is resumed . Continue agitation while spraying . Use Restrictions • Maximum use rate - Refer to Crop-specific Information section for the maximum application use rates of Surtain in each crop . • If additional saflufenacil or pyroxasulfone are applied from other product sources, refer to the Crop-specific Restrictions section for each crop use for the maxi- mum cumulative amount per year for each active ingredient . • DO NOT contaminate water used for irrigation or domestic purposes . • DO NOT apply Surtain through any type of irrigation system (e .g . chemigation) . • Surtain is not for sale, distribution, or use in Nassau and Suffolk counties in New York State. Crop Rotation Intervals • Use Table 4 to determine the proper interval between Surtain application and the planting of rotational crops . Determine the rotational crop interval for tank mix prod- ucts and use the most restrictive interval of all products applied .

12 Table 4. Rotational Crop Planting Intervals for Surtain TM herbicide Crop Surtain Use Rate (fl ozs/A) 9.2 11.0 14.0 17.0 > 17.0 to 27.0 Rotational Crop Interval (months after application) Alfalfa 10 10 10 10 10 Beans (edible) 11 11 11 11 11 Canola (rapeseed) 12 12 12 14 18 Chickpea 1 1 2 4 6 Corn, field 0 0 0 0 0 Corn, pop and sweet 1 1 2 2 3 4 Cotton1 3 4 4 6 9 Fruit and nut trees 12 12 12 12 12 Grass (forage, seed) establishment 18 18 18 18 18 Lentil1 1 2 3 4 6 Peas (dry field)1 1 1 2 4 6 Peas (edible) 9 9 9 9 11 Peanut1 5 6 7 8 9 Potato1 5 6 7 8 9 Rice 10 10 12 14 24 Small grains 2 (other than wheat) 11 11 11 11 18 Sorghum (grain) 6 6 6 10 12 Soybean1 1 2 3 4 6 Sugarbeet 12 12 15 15 15 Sugarcane1 4 5 6 7 9 Sunflower1 5 5 6 7 9 Sweet potato 5 6 6 7 9 Tobacco (grown in states of FL, GA, KY, NC, SC, TN, and VA) 9 9 9 10 12 Tobacco (grown in all other states) 18 18 18 18 18 Wheat 1 1 1 3 6 Cover crops (winter, spring) 1,3 4 4 4 4 6 Other crops 18 18 18 18 18 1 DO NOT include time when the soil is frozen . 2 Small grains (barley, oats, pearl millet, proso millet, rye, triticale) 3 Cover crops (winter, spring) may be planted after application of Surtain , either inter-seeded into the current crop before harvest or after harvest of the current crop . Depending on the sensitivity of the sown cover crop to Surtain , stand establishment may be reduced . If cover crops are sown for conservation purposes less than 4 months after Surtain application, DO NOT harvest as a food or feed crop, and DO NOT allow livestock to graze cover crops .

13 Emergency Replanting Intervals Field corn (according to application rates in Crop-specific Information) may be replanted immediately after crop fail- ure (because of environmental factors, including drought, frost, hail, etc .) . Crop-specific Information Read product information, mixing, application, weeds con - trolled, and adjuvant instructions in preceding sections of the label . Field Corn (grain, seed, silage) SurtainTM herbicide may be applied preplant surface, preplant incorporated, preemergence, or early post - emergence to corn for residual preemergence control of listed weeds (Table 1 ) . Corn in this label refers to field corn (grown for grain, seed, or silage) . Before applying Surtain to seed corn, verify the selectivity of Surtain on your inbred line or hybrid with your local seed company (suppli - er) to help avoid potential injury to sensitive inbreds or hybrids . Application Rate Use Surtain as a part of a weed control program in field corn either in combination or sequentially with other herbi - cides for a broader spectrum of weed control . Apply Surtain in field corn at the residual rates provided in Table 5 . For use of Surtain in seed corn, refer to Crop-specific Use in Seed Corn section . Table 5. Residual Rates of Surtain in Field Corn Application Timing Use Rate1 by Soil Texture2 (fl ozs/A) Coarse Medium Fine Preplant Surface 9 .2 to 11 .0 [9 .2 to 17 .0] 11 .0 to 14 .0 [11 .0 to 17 .0] 11 .0 to 17 .0 Preplant Incorporated Preemergence Early Postemergence 11 .0 to 14 .0 [11 .0 to 17 .0] 1 Application rates in Table 5 eliminate early season broadleaf, grass, and certain sedge weed interference until cultivation or a labeled post - emergence herbicide is applied . 2 Refer to Table 2 for definition of soil texture groups . Text in brackets [ ] is alternate text. Application Timing Surtain may be applied in a single application or in sequential applications . Early Preplant Surface Application (within 15 to 30 days of planting) Use application rates in Table 5 when making early pre- plant surface applications, using the highest application rate for a given soil texture . Early preplant surface applica- tions are not advised on coarse soils, or in areas where average annual rainfall (or rainfall plus irrigation) typically exceeds 40 inches . Early preplant surface applications may be applied as part of a split application program where applications are made as part of the application timings described in this label . However, the cumulative total of sequential application rates must not exceed the maximum labeled rate for a given soil texture . Preplant Surface and Preplant Incorporated Application (within 14 days of planting) Apply Surtain at use rates specified in Table 5 as a broadcast spray to the soil surface or incorporated before planting on all soil types . Preemergence Surface Application Apply Surtain at use rates specified in Table 5 as a broadcast spray to the soil surface after planting and before crop emergence . Early Postemergence Application Apply Surtain at use rates specified in Table 5 as a broad- cast spray to field corn at spiking up to the V3 stage (visible third leaf collar) [Alternate text: V1 stage (visible first leaf col- lar) or V2 stage (visible second leaf collar) or V4 stage (visible fourth leaf collar) or V5 stage (visible fifth leaf collar) or V6 stage (visible sixth leaf collar) or V8 stage (visible eighth leaf collar)] . Refer to Additives section for details about adjuvants for applications of Surtain made after crop emergence . Sequential Application If a sequential application program of Surtain is used (e .g . preplant followed by preemeergence application, or preplant or preemergence followed by an early postemer- gence application), the maximum combined rate of Surtain that may be applied in field corn per year is 27 .0 fl ozs/A . Crop-specific Use in Seed Corn. Apply Surtain pre- plant surface, preplant incorporated, preemergence, or early postemergence at 9 .2 fl ozs/A in seed corn across all soil types . Sequential applications of Surtain may be made with a minimum of 30 days between applications . DO NOT apply more than a maximum cumulative amount of 17 .0 fl ozs/A of Surtain per cropping season in seed corn . Before applying Surtain to seed corn, verify the selectivity of Surtain on your inbred line or hybrid with

14 your local seed company (supplier) to help avoid potential injury to sensitive inbreds or hybrids . Crop-specific Restrictions • DO NOT apply SurtainTM herbicide to popcorn or sweet corn . • DO NOT apply more than 17 .0 fl ozs/A of Surtain (0 .083 lb ai/A of saflufenacil, 0 .133 lb ai/A pyroxasulfone) in a single application . • On coarse soil - DO NOT apply more than a maximum cumulative amount of 18 .5 fl ozs/A of Surtain (0 .090 lb ai/A of saflufenacil, 0 .146 lb ai/A of pyroxasulfone) from sequential applications in field corn per year . • On medium and fine soils - DO NOT apply more than a maximum cumulative amount of 27 .0 fl ozs/A of Surtain (0 .132 lb ai/A of saflufenacil, 0 .211 lb ai/A of pyroxasulfone) from sequential applications in field corn per year . • Maximum number of applications per year: 2 • Separate sequential applications by at least 14 days . • If additional saflufenacil is applied from other product sources, DO NOT apply more than the following maxi- mum cumulative amount of saflufenacil from all product sources per year in corn: 0 .134 lb ai/A on all soils . • If additional pyroxasulfone is applied from other product sources, DO NOT apply more than the following maxi- mum cumulative amounts of pyroxasulfone from all product sources per year in corn: 0 .146 lb ai/A on coarse soils, 0 .266 lb ai/A on medium soils, and 0 .266 lb ai/A on fine soils . • There is no required (preharvest) interval between a pre - plant surface, preplant incorporated, or preemergence application of Surtain and the harvest of field corn . Corn forage and stover may be fed to livestock after harvest . • There is no required (preharvest or grazing) interval between an early postemergence application of Surtain made to field corn at V4 stage or earlier and the harvest of field corn . Corn forage and stover may be fed to live- stock after harvest . • Pre-harvest and Pregrazing Interval (PHI, PGI) for corn forage and stover with an early postemergence application of Surtain made to field corn at V5 to V8 stage = 30 days . • DO NOT apply Surtain where an at- planting application of an organophosphate or carbamate insecticide(s) is planned and/or has occurred because severe injury may result . Surtain may be applied with all other classes of at-planting insecticides including neonicotinoids and pyrethoids . EXCEPTION: Surtain may be applied when Aztec® 2.1% Granular Insecticide , AZTEC® 4.67 G granular insecticide , or SmartChoice ® 5G granular insecticide is applied at planting as a band, T-band, or infurrow . Crop-specific Precautions • When applied before crop emergence, Surtain applica- tion may result in delayed corn emergence and stunting under certain environmental conditions including cool temperatures, excessive rainfall/irrigation, and/or per- sistent wet soil conditions occurring after application . • Ensure the corn seed row is closed . Soil conditions that cause poor seed furrow closure and coverage may result in delayed corn emergence or stunting . • Application of this product with other postemergence or residual herbicides may increase the potential for crop injury after corn has emerged . • Early postemergence applications of Surtain may result in crop response symptoms consisting of foliar spotting on emerged leaves . Use of an adjuvant can increase the level of foliar spotting on emerged leaves . Refer to Additives section for more details on adjuvants . • Tank mixing of Surtain with Glufosinate formulations for early postemergence applications is NOT advised as corn injury could result . • Early postemergence applications of Surtain should be made with water as the carrier . Sprayable fluid fertilizer as an herbicide carrier for early postemergence applica - tions in corn can typically cause corn injury up to and including tissue burn (necrosis) . Sprayable fluid fertilizer as a carrier is NOT advised for use with Surtain after crop emergence unless typical fertilizer burn symptoms are acceptable . • Make applications of Surtain promptly after preparing the spray mixture . Avoid use of spray solutions of Surtain which have been allowed to stand or have been stored in application equipment or the mix tank for an extended period of time as corn injury could result . Fallow and Postharvest Croplands Surtain may be used for residual control of weeds at any time of the year during the fallow period following crop har- vest and before the following crop is planted . Application Rate and Timing Surtain may be applied in a single application or in sequential applications . For residual weed control, apply Surtain at 9 .2 to 17 .0 fl ozs/A . Specific rotational crop intervals must be observed between an application of Surtain and planting of the following crop (see Crop Rotation Intervals section for crop rotation restrictions) .

15 Crop-specific Restrictions • DO NOT apply more than 17 .0 fl ozs/A of SurtainTM herbicide (0 .083 lb ai/A of saflufenacil, 0 .133 lb ai/A pyroxasulfone) in a single application . • DO NOT apply more than 27 .0 fl ozs/A of Surtain (0 .132 lb ai/A of saflufenacil, 0 .211 lb ai/A pyroxasulfone) as a maximum cumulative amount from sequential appli - cations in fallow and post harvest croplands per year . • Maximum number of applications per year: 3 • Separate sequential applications by at least 30 days .

16 © 2024 BASF Corporation All rights reserved . 007969-00501 .20241111 .NVA 2024-04-0683-0328 Supersedes: NVA 2024-04-0683-0062 Supplemental: NVA 2024-04-0683-0272 BASF Corporation 26 Davis Drive Research Triangle Park, NC 27709 Kixor is a registered trademark of BASF. Surtain is a trademark of BASF. Aztec is a registered trademark of Bayer. (tebupirimphos + cyfluthrin, EPA Reg . Nos . 5481-9030 and 5481-9028) SmartChoice is a registered trademark of AMVAC Chemical Corporation. (chlorethoxyfos + bifenthrin, EPA Reg . No . 5481-561) Conditions of Sale and Warranty The Directions For Use of this product reflect the opinion of experts based on field use and tests . The directions are believed to be reliable and must be followed carefully . However, it is impossible to eliminate all risks inherently associated with the use of this product . Crop injury, ineffectiveness or other unintended consequences may result because of such factors as weather conditions, presence of other materials, or use of the product in a manner inconsistent with its labeling, all of which are beyond the control of BASF CORPORATION (“BASF”) or the Seller . To the extent consistent with applicable law, all such risks shall be assumed by the Buyer . BASF warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes referred to in the Directions For Use , subject to the inherent risks, referred to above . TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BASF MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS OR MERCHANTABILITY OR ANY OTHER EXPRESS OR IMPLIED WARRANTY. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BUYER’S EXCLUSIVE REMEDY AND BASF’S EXCLUSIVE LIABILITY, WHETHER IN CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY, OR OTHERWISE, SHALL BE LIMITED TO REPAYMENT OF THE PURCHASE PRICE OF THE PRODUCT. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BASF AND THE SELLER DISCLAIM ANY LIABILITY FOR CONSEQUENTIAL, EXEMPLARY, SPECIAL OR INDIRECT DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT. BASF and the Seller offer this product, and the Buyer and User accept it, subject to the foregoing Conditions of Sale and Warranty which may be varied only by agreement in writing signed by a duly authorized representative of BASF . 1108

17 [Optional Marketing Claims: Powered by Kixor® Powered by Kixor® herbicide Powered by Kixor® Active herbicide]