crop-chem-docs/corpus/epa_ppls/264-1144.md

SERENADE BIOFUNGICIDE WETTABLE POWDER

• EPA Reg No: 264-1144
• Registrant: BAYER CROPSCIENCE, LLC
• Signal word: Caution
• Active ingredients: Bacillus subtilis strain QST 713 (10%)
• Label accepted: 2007-05-16
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/069592-00004-20070516.pdf

---

ID (-1 ! -'1 c}(A, -7 l '3 ~ ! '-' \1"EO sr"'t; .,J O' ~ __ 1, "'~ ~ <!l ~ i ~ 'L PAO'u U,S, ENVIRONMENTAL PROTECTION AGENCY Office Of pesticide Programs Blopesticides and POllution Prevention Division (7511P) 1200 Pennsylvania Avenue NW Washington, DC 20460 NOTICE OF PESTICIDE REGISTRATION 2L Registration _ Reregistration (under Name and Address of Registrant (include ZIP Code); AgraQuest, Inc. 1530 Drew Avenue Davis, CA 956166320 EPA Reg, MeifU!ft Number: 69592-4 Conditional Term of Time- limited Issuance: Name of pesticide Product: Serenade Biofungicide Wettable Powder On tne I)asls of Information furnished by the registrant, the above named pesticide is hereby registered/reregistered under the Federal Insecticide, Fungicide and Rodenticide Act, Registration IS In no way to be construed as an endorsement or recommendation of this product by the Agency, In order to protect health and the environment, the Administrator, on his motion, may at any time suspend or cancel the registration of a pestiCide In accordance With the Act, The acceptance of any name In connection with the registration of a product under this Act is not to be construed as giving the registrant a right to exclusive use Of the name or to Its use If It has been covered bY others The re9istration application referred to above, submitted in connection with registration under' 3(c)(7)(C) of the Federal Insecticide, Fungicide, and Rodenticide Act, as amended, is acceptable provided that you do the following terms and conditions, 1, EPA has identified one inert ingredient listed in this product's Confidential Statement of Formula [dated 2!7i2000] for which an exemption from the requirement of a tolerance is being revoked, This revocation is affective August 8, 2008 (Federal Register of August 9, 2006, 71 FR 45415), This product is being conditionally registered subject to an appropriate tolerance or exemption from the requirement of a tolerance for the affected inert ingredient being in place prior to the above date, 2, Submit/Cite all data reqUired for registration of your product under FIFRA ' 3(c)(5) when the Agency requires all rHgistrants of similar products to submit such data 3, Submrt two (2) copies of the revised final printed labeling before you release the product for shipment Refer to altached Type Size Requirements for final printed labeling, This rellistration will automatically expire on midnight AuguSI 8. 2008- EPA will reevaluate this registration before August 8, 2008 to determine whether to convert the registration to a non-expiring registration, Signature of Approving OffiCial- Date W, Michael McDavit, Associate Director Biopesticides and Pollution Prevention Division (7511 P) Form a570-6

---

UNITl .iTATES ENVIRONMENTAL PROTECTIO. 3ENCY CONCURRENCES SYMBOL ~ 7'0 II P I!.. II Ii SURNAME ~ •••••••• ~ •••• :()l ...... ;z;j;J ..... .............................................................................................................................. . DATE ~ ··~·····~iiiJ7'········ .............................................................................................................................. . EPA Form 1320-1 A (1/90) I Printed on Recycled Paper OFFICIAL FILE COPY

• U,S. Government Printing Oflice: 2005 206-899 (mac)

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label 1006 WETTABLE POWDER [OPTIONALIAL TERNATE STATEMENTS:] [USE INDOORS AND OUTDOORS] [USE IN FIELD APPLICATIONS, GREENHOUSES, NURSERIES, SHADE HOUSES, LANDSCAPES, INTERIORSCAPES, SEEDLING PRODUCTION SITES, FOREST SEEDLING PRODUCTION SITES.] [USE IN TANK MIXES OR ROTATIONAL ALTERNATING SPRAY PROGRAMS WITH OTHER CROP PROTECTION PRODUCTS] rUSE IN RESISTANT MANAGEMENT PROGRAMS] [USE GROUND, AERIAL, CHEMIGATION AND HAND APPLIED EQUIPMENT] [FOR USE ON ORNAMENTALS, TREES, SHRUBS, TURF, LAWNS, SOD, GOLF COURSES (GREENS, TEES, FAIRWAYS AND ROUGHS), SEEDLINGS, AND CONIFERS] [USE IN PRODUCTION OF CONIFERS FOR REFORESTATION] ACTIVE INGREDIENT QST 713 strain of dried Bacillus subtilis . .... 10% OTHER INGREDIENTS. . . . . . .. .. . . ...... 90% Total ... .100.0% Contains a minimum of 5 x 109 cfu/g EPA Reg. No. 69592-4 EPA Est. No.: 69592- MEX-1 2 67545- 66728- AZ-1 GA-2 4 5 37429- 69592- GA-2 CA-1 Superscript corresponds to last d~it of lot number stamped on container U.S. Patent Nos. 6,060,051, 6,103,228, 6,291,426, and 6,417,163 on QST 713 strain of Bacillus subtilis Net weight: [1 or 2 or4 or6 or 12 or 18 or 24 or 1000 Ibs. or 1 or5 or 10 kg] KEEP OUT OF REACH OF CHILDREN CAUTION FIRST AID IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth-to-mouth if possible. Call a poison control center or doctor for further treatment advice. IF ON SKIN: Take off contaminated clothing. Rinse skin with plenty of water for 15-20 minutes. Call a poison control center or doctor for further treatment advice. IF IN EYES: Hold eyes open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present after the first 5 minutes, then continue rinSing eye. Call a poison control center or doctor for treatment advice. Have the product label with you when calling a poison control center or doctor. [For smaller container sizes:] [See attached label booklet for First Aid, Precautionary Statements and Directions for Use.] [PUll back tab for First Aid and Precautionary Statements and Directions for Use.] PRECAUTIONARY STATEMENTS- Agricultural Use HAZARDS TO HUMANS & DOMESTIC ANIMALS CAUTION Harmful if inhaled. Avoid breathing spray mist. Harmful if absorbed through skin. Prolonged or frequently repeated skin contact may cause allergic reactions in some individuals. Avoid contact with skin, eyes or clothing. Wash thoroughly with soap and water after handling. Causes moderate eye irritation. Remove contaminated clothing and wash clothing before reuse. PERSONAL PROTECTIVE EQUIPMENT (PPE) Applicators and other handlers must wear: • Long-sleeved shirt and long pants • Waterproof gloves • Shoes plus socks • NIOSH approved respirator with any N, P, R or HE filter. Follow manufacturer's instructions for cleaning and maintaining PPE. If no instructions are available, use detergent and hot water for washables. Keep and wash PPE separately from other laundry. [OPTIONAL STATEMENT: When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets reqUirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d) (4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS.] USER SAFETY RECOMMENDATIONS Users should: Wash hands before eating, drinking, chewing gum, using tob;!cco or using the toilet. Remove clothing/PPE immediately if pesticides get inside. Then wash thoroughly and put on clean clothing. Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change Into clean clothing.

Revised 08 March 2007 Serenade Biofllngicide Wettable Powder Master Label 2 0136 ENVIRONMENTAL HAZARDS-Agricultural Use Do not apply directly to water or to areas where surface water is present, or to intertidal areas below' the mean high water mark. Do not contaminate water when disposing of equipment washwater or rinsate. Do not apply when weather conditions favor drift or runoff from treated areas. For Agricultural Use DIRECTIONS FOR USE - Agricultural Use It is a violation of Federal law to use this product in a manner inconsistent with its labeling. For any requi rements specific to your state or tribe, consult the agency responsible for pesticide regulation. Do not apply this product in a way that will contact workers or other persons, either direcHy or through drift. Only protected handlers may be in the area during application. For emergencies such as leaks or spills, call 24- hour toll- free CHEMTREC hotline at 1.800.424.9300. AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labeling and with the Worker Protection Standard 40 CFR Part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries and greenhouses and handlers of agricultural pesticides. It contains reqUirements for training, decontamination, notification and emergency assistance. It alSO contains speCific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE), and restricted entry intervals. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 4 hours. PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plant$, soil or water is: coveralls, waterproof gloves, shoes plus socks. Exception: if the product is soil injected or soil incorporated, the Worker Protection Standard. under certain circumstances. allows workers to enter the treated area if there will be no contact with anything that has been treated. STORAGE AND DISPOSAL- Agricultural Use Do not contaminate water, food, or feed by storage and disposal. STORAGE. Store in a dry area inaccessible to children. Store in original containers only. Keep container closed when not in use. PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility. Do not contaminate water when disposing of equipment rinsate. CONTAINER DISPOSAL: For 1000 Ib, bulk bag with liner: Completely empty liner by shaking and tapping sides and bottom to loosen clinging particles. Dispose of liner in a sanitary landfill or by incineration if allowed by State and local authorilies. If burned stay out of smoke. Return empty bulk bag to manufacturer for reuse. If bulk bag is contaminated and cannot be reused, dispose of in the same manner as liner. For all other agricultural use containers: Completely empty bag into application equipment. Then dispose of empty bag in a sanitary landfill or by incineration or, if allowed by State and local authorities, by burning. If bumed, stay out of smoke. GENERAL USE INFORMATION- Agricultural Use Serenade Biofungicide Wettable Powder is a broad spectrum. preventative product for the control or suppression of many important plant diseases. Serenade Biofungicide Wettable Powder may be applied as a foliar spray alone, in altemating spray programs or in tank mixes with other registered crop protection products. When conditions are conducive to heavy disease pressure, use Serenade Biofungicide Wettable Powder in a rotational program with other registered fungiCides. Serenade Biofungicide Wettable Powder may be applied with spray equipment commonly used for making ground or aerial applications and sprinklerlirrigation systems commonly used for chemigation. [OPTIONAL STATEMENT: Serenade Biofungicide Wettable Powder is most effectively used in a preventive disease management program. For improved performance use Serenade Biofungicide Wettable Powder in a tank-mix or rotational program with other registered fungicides. When using Serenade Biofungicide Wettable Powder alone for the first time a rate of 4 pounds per acre is recommended. Depending upon dis.ease pressure the rate can be increased and/or spray intervals decreased. To enhance performance it is recommended that a surfactant [such as Biatune]. known to be safe to the target crop, be added to the spray tank to improve penetration and coverage of above-ground portions of the plant.]

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label 30136 INTEGRATED PEST MANAGEMENT (IPM) of water per acre. Integrate Serenade Biofungicide Wettable Powder into an overall disease and pest management strategy whenever fungicide use is necessary. Follow practices known to reduce disease development. Consult local agricultural authorities for specific IPM strategies developed for your crop(s) and location. USE RATE DETERMINATION - Agricultural Use Carefully read and follow all label directions, use rates and restrictions. Serenade Biofungicide Wettable Powder should be applied prior to or in the early stages of disease development. Use maximum label rates and shortened spray intervals for conditions conducive to threatening or rapid disease development. For proper application, determine the number of acres to be treated, the recommended label use rate and select appropriate gallonage to give good canopy penetration and coverage of plant parts to be protected. Prepare only the amount of spray solution required to treat the measured acreage. Accurate spray equipment calibration is essential prior to use. PRE HARVEST INTERVAL - Agricultural USIl Serenade Biofungicide Wettable Powder can be applied up to and including the day of harvest. APPLICATION INSTRUCTIONS - Agricultural Use GENERAL: Avoiding spray drift at the application site is the responsibility of the applicator. The interaction of many equipment-and-weather-related factors determines the potential for spray drift. The applicator and the grower/treatment coordinator are responsible for considering all of these factors when making decisions. Where states have more stringent regulations, they should be observed. Note: This section is advisory in nature and does not supersede the mandatory label requirements. GROUND: Be sure to maintain agitation during mixing and application to assure unifonTl product suspension. Thorough coverage of all foliage is essential for effective disease control. Serenade Biofungicide Wettable Powder can be applied in commonly used ground equipment, hose-end, pressurized, greenhouse and hand­ held sprayers. To achieve good coverage use proper spray pressure, gallonage per acre, nozzles, nozzle spacing and ground speed. Consult spray nozzle and accessory catalogues for specific information on proper equipment calibration. AERIAL: This product can be applied by aerial application. Refer to the Aerial Drift Reduction Advisory Information section of this label for general directions and precautions. Use the application rate indicated for the appropriate crop in sufficient water to achieve thorough coverage, or a minimum of 3 gallons CHEMIGATION: This product can be applied through sprinkler or drip type irrigation systems, including a center pivot, lateral move, end tow, side wheel roll, trayeler, solid set, and hand move. Refer to the Chemigation Directions for Use section of this label for general directions and precautions. Use the application rate indicated for the appropriate crop as specified in the Use Recommendations section of this label. MIXING INSTRUCTIONS - Agricultural Use MIXING: Serenade Biofungicide Wettable Powder must be diluted with water for Spray applications and may be used in spray equipment commonly used for making ground applications. Partially fill the spray tank with clean water and begin agitation. Add the specified amount of Serenade Biofungicide Wettable Powder to the tank. Finish filling the tank to the desired volume to obtain the proper spray concentration. It is critical that the spray solution be agitated during mixing and application to assure a unifonTl suspension. Do not allow spray mixture to stand overnight or for prolonged periods. [Optional Statement: Maintain a spray solution pH between 4.5 and 8.5]. Serenade Biofungicide Wettable Powder may be tank­ mixed with other registered pesticides to enhance plant disease control. Do not exceed recommended dosage rates. This product cannot be mixed with any product with prohibition against such mixing. Use of the resulting tank mix must be in accordance with the more restrictive label limitations and precautions. COMPATIBILITY: Do not combine Serenade Biofunglclde Wettable Powder In the spray tank with pesticides, surfactants or fertilizers if there has been no previous experience or use of the combination to show It is physically compatible, effective and non-injurious under your use conditions. Serenade Biofungicide Wettable Powder is compatible with many commonly used pesticides, fertilizers, adjuvants and surfactants but has .!lQ! been fully evaluated with all of these. To ensure compatibility of tank-mix combinations they should be evaluated prior to use, as follows: Using a suitable container add proportional amounts of product to water. Add wettable powders first, followed by water dispersible granules, then by liquid flowables and lastly, emulsifiable concentrates. Mix thoroughly and let stand for at least five minutes. If the combination stays mixed or can be remixed, it is physically compatible. Test the combination on a small portion of the crop to be treated to ensure that a phytotoxic response will not occur as a result of application.

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label [OPTIONAL STATEMENT: Do not use with penetrant-type adjuvants.) ADDITIVES: Serenade Biofungicide Wellable Powder is compatible with a wide range of additives. Since the product is primarily a protectant, thorough coverage of all above-ground plant parts is required for effective product performance. To improve plant surface coverage, add a non-phytotoxic adjuvant [such as Biotune "'J to spray tank. CHEMIGATION DIRECTIONS FOR USE General Requirements:

1. Apply this product only through sprinkler or drip type irrigation systems including center pivot, lateral move, end tow, side wheel roll, traveler, solid set or hand move systems. Do not apply this product through any other type of irrigation system.
2. Crop injury or lack of effectiveness can result from non-uniform distribution of treated water.
3. Ensure that the irrigation system used is properly calibrated and if you have questions, call the State Extension Service specialists, the equipment manufacturer or other experts.
4. Do not connect an irrigation system (including greenhouse systems) used for pesticide application to a public water system unless the pesticide label-prescribed safety devices for public water systems are in place.
5. A person knowledgeable of the chemlgation system and responsible for its operation, or under the supervision of the responsible person, shall shut the system down and make any necessary adjustments should the need arise. Equipment Requirements:
6. Public water supply means a system for the provision to the public of piped water for human consumption if such system has at least 15 service connections or regularly serves an average of 25 individuals daily at least 60 days throughout the year.
7. Chemigation systems connected to the public water systems must contain a functional, reduced­ pressure zone (RPZ), backflow preventer or the functional equivalent in the water supply upstream from the point of pesticide introduction. As an option to the RPZ, the water from the public water system should be discharged into a reservoir tank prior to pesticide introduction. There shall be a complete physical break (air gap) between the outlet end of the fill pipe and the top of the overflow rim of the reservoir tank of at least twice the inside diameter of the fill pipe.
8. The system must contain a functional check valve vacuum relief valve, and low pressure drai~ appropriately located on the irrigation pipeline to prevent water source contamination from back flow.
9. The pesticide injection pipeline must contain a functional, automatic, quick closing check valve to prevent the flow of fluid back towards the injection pump.
10. The pesticide injection pipeline must also contain a functional, normally closed, solenoid-operated valve located on the intake side of the injection pump and connected to the system interlock to prevent fluid from being withdrawn from the supply tank when the irrigation system is either automatically or manually shut down.
11. The irrigation line or water pump must include a functional pressure switch which will stop the water pump motor when the water pressure decreases to the point where pesticide distribution is adversely affected. .7) The system must contain functional interlocking controls to automatically shut off the pesticide injection pump when the water pump motor stops or in cases where there is no water pump, when the water pressure decreases to the point where pesticide distribution is adversely affected.
12. Systems must use a metering pump, such as a positive displacement injection pump (e.g., diaphragm pump), effectively designed and constructed of materials that are compatible with pesticides and capable of being filled with a system Interlock.
13. Do not apply when wind speed favors drift beyond the area intended for treatment Application Instructions:
14. Remove. scale, pesticide residues, and other foreign mailer from the chemical supply tank and entire injector system. Flush with clean water. Feilure to provide a clean tank, void of scale or residues may cause product to lose effectiVeness or strength.
15. OonotcomPine Serenade Biofungicide Wettable Powder witf"i pestiCides, surfactants or fertilizers for appllc$tion thl"ough chemlgation equipment unless prior experience has shown the combination physically compatible, effective and non-injurious under conditions of use. Serenade Biofungicide Wellable Powder has not been fully evaluated for compatibility with all adjuvants or surfactants. It is advisable to conduct a spray compatibility test if mixture with adjuvants or surfactants is planned.

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label 50f36 Center-pivot, Lateral Move, End Tow, and Traveler and the grower are responsible for considering all Irrigation Equipment (Use only with electric or oil these factors when making decisions. Where states hydraulic drive systems which provide a uniform have more stringent regulations, they should be water distribution): observed. Note: This section is advisory in nature and • Determine size of area to be treated. does not supersede the mandatory label requirements. • Determine the time required to apply no more than 114 inch of water (6,750 gallons water per acre) over the area to be treated when the system and injection equipment are operated at normal pressures recommended by the equipment manufacturer. Run system at 80 to 95% of manufacturer's rated capacity. • Using only water, determine the injection pump output when operated at normal line pressure. • Determine the amount of Serenade Biofungicide Wettable Powder fungicide required to treat area. • Add required amount of Serenade Biofungicide Wettable Powder fungicide and suffjcient water to meet the injection time requirements of the solution tank. • • Maintain constant solution tank agitation during the injection period. Stop injection equipment after treatment is completed. Continue to operate the system until Serenade Biofungicide Wettable Powder fungicide solution has cleared the sprinkler head. Solid-set, Side (wheel) Roll, and Hand Move Irrigation Equipment: • Determine acreage covered by sprinkler. • Fill injector solution tank with water and adjust flow rate to use contents over a 10 to 30 minute interval. • • • • • • Determine the amount of Serenade Biofungicide Wettable Powder fungiCide required to treat area. Add the required amount of Serenade Biofungicide Wettable Powder fungicide into the same quantity of water used to calibrate the injection equipment. Maintain constant solution tank agitation during the injection period. Operate system at normal pressures recommended by the manufacturer of the injection equipment and used for the time interval established during calibration. Inject Serenade Biofungicide Wettable Powder fungicide at the end of the irrigation cycle or as a separate application to maximize foliar fungicide retention. Stop injection equipment after treatment is completed. Continue to operate the system until Serenade Biofungicide Wettable Powder fungicide solution has cleared the last sprinkler head. AERIAL DRIFT REDUCTION ADVISORY INFORMATION General: Avoiding spray drift at the application site is the responsibility of the applicator. The interaction of many equipment-and-weather-related factors determines the potential for spray drift. The applicator INFORMATION ON DROPLET SIZE: The most effective way to reduce drift potential is to apply large droplets. The best drift management strategy is to apply the largest droplets that provide sufficient coverage and control. Applying larger droplets reduces drift potential, but will not prevent drift if applications are made improperly, or under unfavorable environmental conditions (see Wind, Temperature and Humidity, and Temperature Inversions ). CONTROLLING DROPLET SIZE: Volume - Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with higher rated flows produce larger droplets. Pressure -Do not exceed the nozzle manufacturer's recommended pressures. For many nozzle types lower pressure produces larger droplets. When high flow rates are needed, use higher flow rate nozzles instead of increasing pressure. # of Nozzles - Use the minimum number of nozzles that provide uniform coverage. Nozzle Orientation - Orienting nozzles so that the spray is released parallel to the airstream produces larger droplets than other orientations and is the recommended practice. Significant deflection from horizontal will reduce droplet size and increase drift potential. Nozzle Type - Use a nozzle type that is designed for the intended application. With most nozzle types, narrower spray angles produce larger droplets. Consider using low­ drift no~les. Solid stream nozzles oriented straight back produce the largest droplets and the lowest drift. BOOM WIDTH: For aerial applications, the boom width must not exceed 75% of the wingspan or 90% of the rotary blade. Use upwind swath displacement and apply only when wind speed is 3 -- 10 mph as measured by an anemometer. Use medium or coarser spray according to ASAE 572 definition for standard nozzles or VMD for spinning atomizer nozzles. If application includes a no-spray zone, do not release spray at a height greater than 10 feet above the ground or the crop canopy. APPLICATION HEIGHT: Do not make application at a height greater than 10 feet above the top of the largest plants unless a greater height is required for aircraft safety. Making applications at the lowest height that is safe reduces exposure of droplets to evaporation and wind. SWATH ADJUSTMENT: When applications are made with a crosswind, the swath will be displaced downward. Therefore, on the up and downwind edges of the field, the applicator must compensate for this displacement by adjusting the path of the aircraft upwind. Swath adjustment distance should increase,

Revised 08 March 2007 Serenade Biofungicide Wettable Powder ......... ~~~!@~~~~~~~~~~~!:===u of36 with increasing drift potential (higher wind, smaller FOR SALE AND WARRANTY drops, etc.). AgraQuest warrants to those persons lawfully purchasing this WIND: Drift potential is lowest between wind speeds of 2 - 10 mph. However, many factors, including droplet size and equipment type determine drift potential at any given speed. Application should be avoided below 2 mph due to variable wind direction and high inversion potential. NOTE: Local terrain can influence wind patte ms. Every applicator should be familiar with local wind patterns and how they affect spray drift. TEMPERATURE AND HUMIDITY: When making applications in low relative humidity, set up equipment to produce larger droplets to compensate for evaporation. Droplet evaporation is most severe when conditions are both hot and dry. TEMPERATURE INVERSIONS: Do not apply during a temperature inversion because drift potential is high. Temperature inversions restrict vertical air mixing, which causes small, suspended droplets to remain in a concentrated cloud. This cloud can move in unpredictable directions due to the light variable winds common during inversions. Temperature inversions are characterized by increasing temperatures with altitude and are common on nights with limited cloud cover and light to no wind. They begin to form as tihe sun sets and often continue into the morning. Their presence can be indicated by ground fog; however, if fog is not present, inversions can also be identified by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing. SENSITIVE AREAS: The pesticide should only be applied when the potential for drift to adjacent sensitive areas (e.g, residential areas, bodies of water, known habitat for threatened or endangered species, non-target crops) is minimal (e.g. when wind Is blowing away from the sensitive areas), Do not allow spray to drift from tihe application site and contact people, structures people occupy at any time and the associated property, parks and recreation areas, non-target crops, aquatic and wetland areas, woodlands, pastures, rangelands, or animals. product that at the time of the first sale of this product by Seller that this product conformed to its description and was reasonably fit for the purposes stated on the label when used in accordance with Seller's directions. Buyers and users of this product assume the risk of any use contrary to such directions. EXCEPT AS PROVIDED ELSEWHERE IN WRITING CONTAINING AN EXPRESS REFERENCE TO THIS WARRANTY AND LIMITATION OF DAMAGES, SELLER MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OR GUARANTY, INCLUDING ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS OR OF MERCHANTABILITY AND NO AGENT OF SELLER IS AUTHORIZED TO DO SO. Except to the extent prohibited by applicable law, AgraQuest offers this product with the following conditions: 1) buyers and users of this product assume the risk of any storage, handling or use contrary to Agr_Quest's label and directions and 2) AgraQuest's liability shall in no case exceed the purchase price of the applicable AgraQuest product. Serenade Biofungicide Wettable Powder· is a registered trademark of AgraQues!. ~ Copyright AgraQuest, Inc., 2007 Made In Mexico AgraQuest, Inc. 1530 Drew Avenue Davis, California 95618 www.agraquest.com

Revised 08 March 2007 Serenade ftiofungicide Wettable Powder Master Label page 7 of36 Recommended Application Rates for Selected Crops - Agricultural Use Serenade Biofungicicle WP has a O-Day Pre Harvest Interval for all crops contained on this label Under moderate to severe di~ease pressure, for improved performance, increase rates and reduce spray intervals or use Serenade Biofungicide WP in a tank mix or rotational program with other registered fungicides. Crops Disease Rate Application Instructions Ibs.lacre· Artichoke Powdery Mildew Begin application when conditions are conducive to disease Leveillula taurio8, 2-6 development. Repeat on 7 to 10 day intervals or as needed. Erysiphe cichoracearum Serenade Biofungicide Wettable Powder may be applied up to and Gray Mold including the day of harvest. Botrytis spp. Bacterial Crown Rot Erwinia chrvsanthemi Asparagus Rust Begin application soon after emergence and when conditions are Puccinia asparagi 2-6 conducive to disease development. Repeat on 7 to 10 day intervals Botrytis Blight or as needed. Serenade Biofungicide Wettable Powder may be Botrytis cinerea applied up to and including the day of harvest. Bananas Sigatoka Begin application when leaves first appear and repeat on 7 to 21 day Plantains Mycosphaere/la spp. 2-6 intervals or as needed. The addition of an approved emulsifiable oil to spray solutions will improve performance. Berries Mummy Berry . Mummy Berry - For suppression, begin application at the bud break Monilinia vaccinii-corymbos; 2-6 stage of development and repeat on a 7 to 10 day interval or as Blueberry Anthracnose Fruit Rot needed. For improved performance, use Serenade Biofungicide Blackberry Col/eto/richum Wettable Powder in a tank mix or rotational program with other Raspberry gloeosporiodes registered fungicides for mummy berry control. Loganberry Col/etotriehum aeutatum Huckleberry Bacterial Canker - Apply before fall rains and again during Cranberry Botrytis Blight dormancy before spring growth. Gooseberry Botrytis cinerea Elderberry Leaf Rust For all other diseases - Begin application prior to disease Currant Pucciniastrum \faccinii development and repeat on a 7 to 10 day interval or as needed. For Caneberry Powdery Mildew improved performance of Serenade Biofungicide Wettable Bushberry Microsphaera Bini Powder, add a surfactant [such as Biotune] to the spray tank and other Sooty Mold to improve coverage. berry crops Misc. fungi Alternaria Fruit Rot Altemaria tenui$sima Cranberries - Make application to non-flooded fields only. Bacterial Canker Pseudomonas app. Serenade Blofunglclde Wettable Powder may be applied to fruit Downy Mildew up to arid Including the day of harvest. Peronospora sparsa Phomopsis Phomops;s v8ct;inii

Rate presented In Ibs.lacre unless otherwIse noted.

Reyised 08 March 2007 Serenade Biofungiclde Wettable Powder Master Label page 8 of36 Recommended Application Rates for Selected Crops - Agricultural Use Serenade Biofungiclde WP has a O-Day PreHarvest Interval for all crops contained on this label Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or use Serenade Biofungicide WP in a tank mix or rotational program with other registered fungicides, Crops Brassica vegetables (Cole Crops) Broccoli Cabbage Cauliflower Brussels Sprouts Collards Kale Mustard Greens Kohlrabi and other Brassica crops Bulb Vegetables Onion Garlic Shallots and other bulb vegetables Disease Pin Rot Complex AlternarialXanthomonas Bacterial Leaf Spot Pseudomonas syringae Bacterial Soft Rot Erwinia / Pseudomonas Black Rot Xanthomonas campestris Xanthomonas Leaf Spot Xanthomonas campestris Alternaria Leaf Spot Altemaria spp. Anthracnose Colletotrichum higginsianum Cercospora Leaf Spot Cercospora brassicicola Downy Mildew Peronospora parasitica Peronospora spp. Powdery Mildew Erysiphe polygoni Southern Blight Sclerotium roltsii Botrytis Neck Rot Botrytis spp. Botrytls Leaf Blight Botrytis squamosa Onion Purple Blotch Altamaria parri Onion Downy Mildew Peronospora destructor Downy Mildew Peronospora spp. Powdery Mildew Erysiphe spp. White Rot Sclerotium cepivorum Rust Puccinia porri Rate Application Instructions Ibs.lacre' Pin Rot • For suppression, begin application when environmental 2-6 conditions are conducive to disease development and repeat on 7 to 10 day interval or as needed. For improved performance, use Serenade Biofungicide Wettable Powder in a tank mix or rotational programwitll other registered fungicides for pin rot control. For all other diseases a Begin application soon after emergence or transplant and when conditions are conducive to disease development. Repeat on a 7 to 10 day interval or as needed. Begin application -when environmental conditions are conducive to disease development and repeat on a 7 to 10 day interval or as needed. Apply sufficient water to provide complete coverage of plants. When 2-6 conditions are conducive to rapid disease development, use Serenade Biofungicide Wettable Powder in a rotational program with other registered fungicides for Botrytis neck rot control. For suppression, begin application when conditions are conducive to 2~ dis!I8se development and repeat on a 7 to 10 day interval or as needed. For improved performance, use Serenade Biofungicide Wettable Powder in a tank mix or rotational program with other reaistered funaicides for rust control.

Rate presented In Ibs.lacre unless otherwtse noted.

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label page 9 of36 Recommended Application Rates for Selected Crops - Agricultural Use Serenade Biofunglcide WP has a O-Day PreHarvest Interval for ali crops contained on this label Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or use Serenade Biofungicide WP in a tank mix or rotational program with other registered fungicides, Crops Disease Rate Application Instructions Ibs.lacre· Cereal Grains Powdery Mildew Begin applications when environmental conditions and plant stage Erysiphe graminis are conducive to disease development. Repeat on 7 to 10 day Barley Rust intervals or as needed. Use higher rates and shorter application Com Pueeinia spp. 2-6 intervals under heavy disease pressure. Millets Oat Blast Rice Rye Pyrieularia oryzae Sorghum Triticale Sheath Spot and Blight Wheat Rhizoctonia oryzae and other Thanafephorus kernel cereal grain crops Smut TiJJetia bare/ayana Bacterial Blight and Streak Xanthomonas spp. Stem Rot Sclerotium oryzae Magnaporthe spp. Brown Rot, Leaf Spots and Smuts Cereospora spp. Entyloma spp. Dreschlera spp. Cochliobolus spp. Ceratobasidium spp.

Rate presented In Ibs.!acre unless otherwise noted.

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label page 10 of36 Recommended Application Rates for Selected Crops - Agricultural Use Serenade Biofungicide WP has a O-Day Pre Harvest Interval for all crops contained on this label Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or use Serenade Biofungicide WP in a tank mix or rotational program with other registered fungicides. Crops Citrus Orange Grapefruit Lemon Tangerine Tangelo Pummelo and other citrus crops Coffee Corn Sweet Corn Popcorn Seed Corn Silage Corn Field Com and other corn crops Disease Greasy spot Mycosphaerella citri Post Bloom Fruit Drop Colletotrichum acutatum Scab Elsinoe faweetti Melanose Diaporthe citri Alternaria Leaf Spot Altemaria altemata Bacterial Blast Pseudomonas syringae Coffee Berry Disease Colletotriehum coffeanum Bacterial Blight Pseudomonas syringee Common rust Puceinia sorghi Northern Leaf Blight Exserohilum turcicum Helminthosporium turcium Southern Leaf Blight Bipolaris maydis He/minthosporium maydi Cochliobolus heterostrophus Rate Ibs.lacre· 2-6 2- 6 2-6

Rate presented In IbsJacre unless othelWlse noted.

Application Instructions Greasy spot - For suppression, begin applications at first new foliar flush, and repeat with subsequent new flushes. When conditions are conducive to rapid disease development, Serenade Biofungicide Wettable Powder must be used in a tank mix program with other registered products, such as spray oil or copper- based fungiCides, at labeled rates. Post bloom fruit drop - For suppression, begin applications at early bloom and when conditions are conducive to disease development. Repeat on a 7 to 10 day interval or as needed. Utilize the shorter spray interval between applications if warm, wet conditions persist. Citrus scab - For suppression, begin applications at first new foliar flush and repeat at petal fall and at Y, inch diameter fruit. Melanose - For suppression, begin applications at petal fall and repeat on a 14 to 21 day interval until fruit becomes resistant Alternaria Leaf Spot - Begin applications when environmental conditions and plant stage are conducive to disease development. Repeat on 7 to 10 day intervals or as needed. Bacterial Blast- Begin applications when environmental conditions are conducive to disease development. Repeat on 7 to 10 day intervals or as needed. For improved performance on post bloom fruit drop, scab and Melanose, use Serenade Biofungicide Wettable Powder in a tank mix or rotational program with other registered fungicides. Begin applications when environmental conditions are conducive to disease development. Continue applications on 7 to 10 day intervals or as needed. Use higher rates and shorter application intervals under heavy disease pressure. For improved performance use Serenade Biofungicide Weltable Powder in a tank mix or rotational program with other registered fungicides Begin applications when environmental conditions are conducive to disease development. Continue applications on 7 to 10 day intervals or as needed. Use higher rates and shorter application intervals under heavy disease pressure.

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label page 11 006 Recommended Application Rates for Selected Crops - Agricultural Use Serenade Biofungicide WP has a D-Day PreHarvest Interval for all crops contained on this label Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or use Serenade Biofungicide WP in a tank mix or rotational program with other registered fungicides, Crops Disease Rate Application Instructions Ibs.lacre· Cucurblts Powdery Mildew Begin application soon after emergence or transplant and when Erysiphe spp. 2-6 conditions are conducive to disease development. Repeat on Cucumber Sphaerotheca spp. 7 to 10 day interval or as needed. When environmental Cantaloupe Gummy Stem Blight conditions and plant stage are conducive to rapid disease Melon Didymella bryoniae development, use Serenade Biofungicide Wettable Powder in Muskmelon Phoma cucurbifacearum a rotational program with other registered fungicides. Squash Angular Leaf Spot Watermelon Pseudomonas syringae and other Anthracnose cucurbit crops Colletotrichum lagenarium Downy Mildew P seudoperonospora cubensis Bacterial Fruit Blotch Acidovorax avenae Fruiting Bacterial Spot Begin application soon after emergence or transplant and when Vegetables Xanthomonas spp. 2-6 environmental conditions are conducive to disease development. Target Spot Continue applications on a 5 to 7 day interval or as needed. When Pepper Corynespora cassliicola conditions are conducive to rapid disease deveklpment, for improved Tomato control, use Serenade Biofungicide Wettable Powder in a tank mix Eggplant program with copper-based bactericides registered for control of Ground Cherry bacterial sDOt at labeled rates. Tomatillo Bacterial Canker 2-6 Begin applications When environmental conditions are conducive to Okra Clavibacter disease development. Repeat on 7 to 10 day intervals or as needed. and other michiganensis fruiting Buck-eye Rot 2-6 Begin application soon after emergence or transplant and continue on vegetables Phytophthora parasitica a 7 to 10 day interval or as needed. For improved perfonnance of Anthracnose Serenade Biofungicide Wettable Powder add a surfactant [such as Col/etotrichum candidum Blotunel to the sorey tank to improve coverage. Bacterial Speck 2-6 Begin application soon after emergence or transplant and when Pseudomonas syringae environmental conditions are conducive to disease development. pvtomato Continue appHcations on a 5 to 7 day interval or as needed. Use higher rates when conditions are conducive to rapid disease development. Early Blight For suppression, begin application when plants are 4 to 6 inches high. Altemaria solani 2-6 Repeat applications on a 5 to 7 day interval or as needed. For improved perfonnance, use Serenade Biofungicide Wettable Powder Late Blight-suppression in a tank mix or rotational program with other registered fungicides for Phytophthora infestans lale blight control. Use shorter spray intervals under conditions conducive to rapid disease development. Powdery Mildew FOr suppression, begin appiiclltion soon after emergence or transplant Leveillula taurica 2-6 and continue on a 7 to 10 day interval or as needed, For improved Oidiopsis faurica performance, use Serenade Biofungicide Wettable Powder in a tank Erysiphe spp. mix or rotational program w"h other registered fungicides for powdery Sphaerotheca spp. mildew control. Downy Mildew Pseudoperonospera cubensis Gray Mold Begin application soon after emergence or transplant and repeat on a Botrytis cinerea 2-6 7 to 10 day interval or as needed.

Rate presented In Ibs.lacre unless otherwise noted.

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label page 12 of 36 Recommended Application Rates for Selected Crops - Agricultural Use Serenade Biofungicide WP has a O-Day PreHarvest Interval for all crops contained on this label Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or use Serena d B' f 'd WP k' . I I h h . d f "d e 10 unaici e in a tan mix or rotatlona program w t ot er registers unglCI es. Crops Disease Rate Application Instructions Ibs./acre· Grape Gray Mold Begin application at bloom, before bunch closure, at verasion and Botrytis cinerea preharvest. Sour Rot 2-6 [a complex of pathogens Serenade Biofungicide Wettable Powder may be applied to fruit up to Aspergillus niger, and including the day of harvest. Alternaria tenuis, Botrytis cinerea, Cladosporium herbarum, Rhizopus arrhizus, Penicillium sp., and others] Powdery Mildew Begin application when new shoots are Yr to 1 %- inches long. Uncinula necator 2-6 Repeat when shoots are 3 to 5 inches long, when shoots are 8 to 10 inches long and then at 7 to 10 day intervals until disease conditions no longer exist. Downy Mildew For suppression, apply at 10 inch shoot. then at 7-10 day intervals Plasmopara viticoJa 2-6 until bunch closure (berry touch). For improved performance, use Serenade Biofungicide Wettable Powder in a tank mix or rotational I program with other reaistered funQicides for downy mildew control. Black Rot 2-6 Begin applications when shoots are 4 to 6 inches in length and repeat Guignardia bidwelli on 7-10 day intervals throughout the season until the berries start to change color. Phomopsis 2-6 Begin applications when shoots are Y, to 1 inch long and repeat when Phomopsis vitica!a shoots are 6-8 inches long. Eutypha 2·5% Apply solution to pruning wound •. Sanitation is critical. All wood Eulypha lala from infected plants must be removed from the vineyard and destroyed (eijher buried or burned). Herbsl Spices Bacterial Blight Begin application when environmental conditions are conducive to Pseudomonas syringae 2-6 disease development. Repeat on 7 to 10 day interval or as needed. Anthracnose Collelolrichum spp. Alternaria Leaf Blight Alternaria spp. Botrytis Bolrytis spp.

Rate presented In Ibs./acre unless otherwise noted.

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label page 13 of 36 Recommended Application Rates for Selected Crops - Agricultural Use Serenade Biofungicide WP has a O·Day Pre Harvest Interval for all crops contained on this label Under moderate to severe disease pressure, for improved performance .. increase rates and reduce spray intervals or use Serenade Biofungicide WP in a tank mix or rotational program with other registered fungicides. Crops Hop Disease Powdery Mildew Sphaerotheca macularis Downy Mildew Peronospora spp.

NOTE CHANGE IN RATE

Rate • Ibs.l100 gal 4-6 Ib • .!100 gal Application Instructions Use the higher rates when moderate to high disease pressure is present or expected. Begin applications when environmental conditions are conducive to rapid disease development. Continue sprays at 7 day intervals or as needed. Apply at a rate of 4·6 Ibs. per 100 gallons of water using ground equipment. Minimum spray volume recommendations for hop growth stages are as follows: Emergence to training: Use 4·6 Ibs. of product per 100 gallons of water. Apply using a minimum spray volume of 20 gallons per acre. Coverage will vary with the size of the vines and the type of spray equipment. Apply adequate spray volume to achieve complete spray coverage. Training to wire: Use 4-6 Ibs. of product per 100 gallons of water. Apply using a minimum spray volume of 50 gal/ons per acre. Coverage will vary with the size of the vines and the type of spray equipment. Apply adequate spray volume to achieve complete spray coverage. Wire touch through harvest: Use 4-6 Ibs. of product per acre. Apply in a minimum spray volume of 100 gallons per acre. Higher water volumes may be necessary to achieve thorough coverage after side arms develop. Apply adequate spray volume to achieve complete spray coverage.

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label page 14 of36 Recommended Application Rates for Selected Crops - Agricultural Use Serenade Biofungicide WP has a O-Day PreHarvest Interval for all crops contained on this label Under moderate to severe disease pressure, for improved peliormance, increase rates and reduce spray intervals or use Serenade Biofungicide WP in a tank mix or rotational Droaram with other reaistered funaicides. Crops Diseae Leafy Vegetables Lettuce Celery Spinach Parsley Radicchio and other leafy vegetable crops Downy Mildew Bremia lactucae Peronospora spp. Powdery Mildew Erysiphe cichoracearum Pink Rot Sclerotinia sclerotiorum Anthracnose Colletotrichum spp. Bacterial Blight Xanthomonas campestris Bacterial Leaf Spot Xanthomonas campestris pv. vitians Sclerotinia Head and Leaf Drop Sc/erotinia spp. Rate Application Instructions Ibs./acre# 2 2~ Pink rot Begin application approximately 8 weeks before harvest and repeat on a 14 day interval. Apply Serenade Biofungicide Wettable Powder as a directed spray in sufficient water to ensure thorough coverage of the base of the plants and the surrounding soil surface. Light irrigation following application to incorporate Serenade Biofungicide Wettable Powder may improve disease control. Downy mildew I powdery mildew - For suppression, begin application when conditions are conducive to disease development and repeat on 7 to 10 day intervals or as needed, For improved performance, use Serenade Biofungicide Wettable Powder a tank mix or rotational program with other registered fungicides for downy mildew and powdery mildew control. Anthracnose· Begin application prior to disease development when environmental conditions and plant stage are conducive to rapid disease development and repeat on a day 7 to 10 day interval or as needed. Use higher rates and shorter application intervals under heavy disease pressure. Bacterial Blight/Bacterial Leaf Spot ~ Begin applications when environmental conditions are conducive to disease development. Receat on 7 to 10 day intelVals or as needed. For control of earty Sclerollnla head and leaf drop: Apply at planting or immediately following planting but prior to crop emergence as a 4 to 6 inch seed line treatment Make a second application as a directed spray with multip'e nozzles per each seed line in sufficient water to ensure thorough coverage of lower plant leaves and surrounding soil surface within 7 days of thinning, Repeat applications on 10 to 14 day intervals if conditions for disease development persist. Use higher rates under conditions conducive to moderate to severe disease pressure. Light irrigation after application to incorporate the product may improve disease control. OR For control of 'cleraiinia head and leaf drop: Apply as a directed spray with multiple nozzles per each seed line in sufficient water to ensure thorough coverage of lower plant leaves and surrounding soil surface within 7 days of thinning or transplanting. Repeat applications on 10 to 14 day intervals ff conditions for disease development persist. Use higher rates under conditions conducive to moderate to severe disease pressure. Light irrigation after application to incorporate the product may improve disease control.

Rate presented In Ibs./acre unless otherwise noted,

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label page 15 006 Recommended Application Rates for Selected Crops - Agricultural Use Serenade Biofungicide WP has a O-Day PreHarvest Interval for all crops contained on this label Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or use 5 d B' f "d WP' t k' tt'l ith th 't d f "d erena e 10 unglCI e In a an mix or ro a lanai program w 0 er regis ere ungici es. Crops Disease Rate Application Instructions Ibs.lacre· Legumesl Rust For suppression, begin application soon after emergence or Vegetables Uromyces appendicu/atus 2-6 transplant and when conditions are conducive to disease (succulent development. Repeat on 7 to 10 day intervals or as needed, When and dried conditions are conducive to disease development, for improved beans and performance, use Serenade Biofungicide Wettable Powder in a tank peas) mix or rotational program with other registered fungicides. Beans Rust Begin applications when environmental conditions and plant stage are Green beans Puccinia spp. 2-6 conducive to disease development. Repeat on 7 to 10 day intervals Snap beans Bacterial Pustule or as needed. Use higher rates and shorter application intervals Shell beans XBnthomonBS spp. under heavy disease pressure. Soybeans Powdery Mildew Dry Beans Erysiphe spp. Garbanzo Downy Mildew beans Peronospora mansherica Lima beans Peas Chick peas Asian Soybean Rust 2-6 Use as part of a program with other fungicides labeled for Asian Split peas Phakospora pachyrhizi Soybean Rust. Begin applications when environmental conditions are Lentils conducive to disease development. Continue at 7 to 14 day intervals And other or as needed. Use. higher rates and shorter application intervals legume/ under heavy disease pressure. Vegetable crops Aphonomyces spp, Begin application soon after emergence or transplant and when 2-6 conditions are conducive to disease development. Repeat on a 7 to 10 day interval or as needed. White Mold Begin application soon after emergence or transplant and when Sclerotinia sclerotiorum 2-6 conditions are conducive to disease development. Repeat on 7 to 10 day inteNals or as needed. When conditions are conducive to rapid Gray Mold (Botrytis Blight) disease development use Serenade Biofungicide Wettable Powder in Botrytis spp. a rotational program with other registered fungicides. Mint Rust Begin application soon after emergence and when conditions are And other Puccinia menthae 2-6 conducive to disease development. Repeat on 7 to 10 day intervals herb/spices Powdery Mildew or as needed. Use higher rates and shorter application intervals Erysiphe spp, under heavy disease pressure. Downy Mildew Peronospora spp.

Rate presented in ibs.lacre unless otherwise noted.

Revised 08 March 8, 2007 SERENADE®Biofungicide Wettable Powder MASTER LABEL paRe 16 of 36 Recommended Application Selected Crops - Agricultural Use Serenade Biofungicide WP has a O-Day Pre Harvest Interval for all crops contained on this label Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or use Serenade Biofwngiclde WP in a tank mix or rotational program with other registered fungicides. Crops Disease Rate Ibs.lacre· Application Instructions Oil Seed Bacterial Speck Begin application soon after emergence and when conditions are Crops Pseudomonas syringe 2-6 conducive to disease development. Repeat on 7 to 10 day intervals pv. glycinea or as needed. Use higher rates and shorter application intervals Canala Brawn Spot under heavy disease pressure. Castor Septoria glycines Coconut Cotton Pod and Stem Blight Flax Diapor/he phaseolorum Oil Palm Olive var.sojae Peanut Phomopsis longicola Rapeseed Downy Mildew Safflower Peronospora mansherica Sesame Ru~t Sunflower White Mold (Sclerotinia Soybeans Stem Rot) and other Sclerotinia sclerotiorum oilseed crops Bac:terial Pustule Xanthomonas spp. Asian Soybean Rust 2-6 Use as part of a program with other fungicides labeled for Asian Phakospora pachyrhizi Soybean Rust. Begin applications when environmental conditions are conducive to disease development. Continue at 7 to 14 day intervals or as needed. Use higher rates and shorter application intervals under heavy disease pressure. Olive Olive Knot Apply before fall rains and again during dormancy before spring Pseudomonas savastanoi 2-6 growth. For improved control, under conditions conducive to heavy Leaf Spot disease pressure, use Serenade Biofungicide Wettable Powder in a Cercospora tank-mix or rotational program with a copper-based bactericide c/adosporioides registered for control of olive knot. In cool, wet areas, apply preventive treatments to olive trees after harvest but before winter rains baain and aaain in sorina if wet, rainv weather oersists. Peanut Early Leaf Spot Begin application when environmental conditions are conducive to Cercospora spp. 2-6 disease development. Repeat applications on 14 day intervals or as Cercospora arachidicola needed. For improved control, use Serenade Biofungicide Wettable Late Leaf Spot Powder in a tank mix program with copper-based fungicides Cercosporidium registered for control of peanut leaf spot at labeled rates. Peanut pensonatum hay may be fed to livestock. Rust Put;cinia arachidis White Mold Sclerotinia sclerotiorum Web Blotch Phoma arachidicola

Rate presented in Ibs./acre unless otherwise noted.

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label page 17 of36 Recommended Application Rates for Selected Crops - Agricultural Use Serenade Biofungiclde WP has a O-Day PreHarvest Interval for a" crops contained on this label Under moderate to severe disease pressure, for improved performance, Increase rates and reduce spray intervals or use Serenade Biofungicide WP in a tank mix or rotational program with other registered fungicides. Crops Disease Pome Fruit Apple Crabapple Pear Quince Mayhaw and other porne fruit Fire Blight Erwinia amy/ovora Scab Venturia spp. Brooks Spot Mycosphaerella pomi Cedar Apple Rust Gymnosporangium juniperi-virginianae Flyspeck Schizolhyrium pomi Sooty Blotch G/oeodes pomigena Bot Rot Bolryosphaeria dotllidea Bitter Rot Collelolrichum spp. Powdery Mildew Podosphaera leuco/richa Rate Application Instructions Ibs.lacre" 2-6 2-6 2-6 2-6 For suppression begin application at 1 5% bloom and repeat as necessary to protect open, untreated blossoms when conditions favoring disease development are likely to occur. For maximum control, use Serenade Blofunglclde Wettable Powder prior to and as close as possible to fire blight infection events. During periods of rapid bloom development and frequent infection periods, spray intervals of 3 to 7 days may be required. After petal fall, continue applications on a 7 day interval while environmental conditions favor disease development. Apply in sufficient water to provide full coverage. For improved performance, use Serenade Biofungicide Wettable Powder in a rotational program with antibiotics registered for fire blight control such as but not limited to oxytetracycline or streptomycin. Proper orchard cultural practices are essential to eliminate fire blight· infected tissue from the orchard to assure good performance of any crop protection product. Care must be taken to remove and destroy dead and diseased wood from the orchard prior to and during the growing season. Use of Serenade Biofungicide Wettable Powder alone has not been shown to affect fruit finish. Use caution when selecting spray adjuvants. Select only those adjuvants which through prior experience do not affect fruit finish when combined with Serenade Blofungicide Wettable Powder. For suppression, begin application at green tip or when environmental conditions become favorable for primary scab development and repeat on a 7 to 10 day Interval or as needed. When environmental conditions are conducive to rapid disease development, for improved performance, use Serenade Biofungicide Wettable Powder in a tank mix or rotational program with other registered fungicides for scab control. For control of Brooks Spot, Cedar Apple Rust, Flyspeck Sooty Blotch, Bot Rot and Bitter Rot: Begin applications pre­ bloom when environmental conditions are conducive to disease development. Repeat applications at 7 to 14 day intervals or as needed. Apply in sufficient spray volume to ensure thorough coverage. Use higher application rates and shorter spray intervals when conditions are conducive to rapid disease development or heavy disease pressure. For improved performance of Serenade Biofunglcide Wetlable Powder add a surfactant [such as Blotune® Adjuvant], known to be safe to the target crop, to the spray tank to Improve coverage and wetllng of plant surfaces. Serenade Biofungicide Wetlable Powder may be applied up to and Including the day of harvest (O-day PHi). Begin application at tight cluster, or sooner, if conditions are conducive to disease development. Repeat applications through the second cover spray on a 7 to 10 day Interval. Additional sprays beyond second cover may be needed on. susceptibJe varieties or when environmental conditions are conducive to rapid disease development. Use high label rate and shorter spray intervals when conditions are conducive to rapid disease development.

Rate presented In Ibs.lacre unless otherwise noted.

;;0 13~ Revis£d 08 March 2007 Serenade Biofungicide Wettable Powder Master Label page 18 of 36 Recommended Application Rates for Selected Crops - Agricultural Use Serenade Biofungicide WP has a O-Day PreHarvest Interval for all crops contained on this label Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or use Serenade Biofungicide WP I . h h . d I ··d in a tank mix or rotational proqram Wit at er re~ustere unqlci es. Crops Disease Rate Application Instructions Ibs.lacre· Root I Tuber Black Roll Begin application soon after emergence or transplant and when and Corm Black Crown Rot 2-6 conditions are conducive to disease development. Repeat on a 7 to Vegetables Alternaria spp. 10 day interval or as needed. Use high rates and shorter intervals Alternaria Leaf Blight when conditions are conducive to rapid disease development. Apply Carrot Alternaria dauci in sufficient water to provide thorough coverage. Potato Bacterial Leal Spot Sweet Potato Xanthomonas Beets campestris av. carotae Ginger Bacterial Leal Blight Begin application soon after emergence or transplant and when Horseradish Xanthomonas 2-6 conditions are conducive to disease development. Repeat on a 7 to Radish campestris 10 day interval or as needed. Use high rates and shorter intervals Ginseng Downy Mildew when conditions are conducive to rapid disease development. Turnip and Peronospora spp. Apply in sufficient water to provide thorough coverage. other root! Powdery Mildew tuber and corm Erysiphe spp. crops White Mold Sclerotinia sclerotiorum Gray Mold Boirytis spp. For suppression, begin application soon after emergence and when Early Blight 2-6 conditions are conducive to disease development. Repeat on a 5 to 7 Alternaria solani day interval or as needed. For improved performance, use Serenade Late Blight - Biofungiclde Wettable Powder in a tank mix or rotational program with suppression other registered fungicides for late blight control. Phytophthora infestans Roses, Field Powdery Mildew Begin applications when environmental conditions and plant stage are Sphaerotheca spp. 2-6 conducive to disease development. Continue applications on Rust 7 to 14 day intervals or as needed. Use higher rates and shorter Puccinia spp. application intervals under heavy disease pressure.

Rate presented In Ibs.lacre unless otherwise noted.

dl~~ Revised 08 March 8, 2007 SERENADE® Biofungicide Wettable Powder MASTER LABEL page 19 of 36 Recommended Application Selected Crops - Agricultural Use Serenade Biofungicide WP has a O-Day PreHarvest Interval for all crops contained on this label Under moderate to sevete disease pressure, for improved pertormance, increase rates and reduce spray intelVals or use Serenade Biofungicide WP in a tank mix or rotational program with other registered fungicides. Crops Stone Fruit Apricot Cherry Nectarine Peach Plum Prune And other stone fruit crops . Disease Anthracnose Col/etotrichum spp. Powdery Mildew Sphaerotheca parnnOSB Podosphaera clandestine Podosphaera spp. Rusty Spot Podosphaera leucotricha Bacterial Canker Pseudomonas spp. Alternaria Spot I Fruit Rot Alternaria alternate Scab Cladosporium carpoph;Jum Brown Rot Blossom Blight Monilinia laxa Fruit Brown Rot Monilinia fruticola Gray mold Botrytis cinerea Shot Hole Wilsonomyces carpophilus Xanthomonas pruni BhumerielJa gaapi CercospOra spp. Bacterial Leaf Spot! Bacterial Spot Xanthomonas arboricola Rate Application Instructions IbsJacre" Brown Rot Blossom Blight - Begin application at early bloom and 2-6 repeat through petal fall on a 7 day interval or as needed. Scab - Begin application at petal fall and repeat on a 7 to 10 day interval or as needed. Bacterial Blight - Apply post harvest before fall rains and again during dormancy before spring growth. Powdery Mildew - For suppression, begin application at popcorn stage and repeat on a 7 day interval or as needed. For improved performance, use Serenade Biofungicide Wettable Powder in a tank mix or rotational program with other registered fungicides for powdery mildew control . For all other diseases - Begin application prior to disease development when environmental conditions and plant stage are conducive to rapid disease development and repeat on a 7 to 10 day interval or as needed. Post harvest disease protection - To aid in the control of post harvest infections of Botrytis and Monilinia apply Serenade Biofungicide Wettable Powder prior to harvest with sufficient water to thoroughly cover fruit. Apply on a 7 day schedule or as needed up until the time of harvest. Bacterial Leaf Spot! Bacterial Spot- Begin applications at bud break and c0ntinue on a 7 to 14 day schedule or, as needed until harvest. During periods of rapid disease development and frequent infection periods, use Serenade Biofungicide Wettable Powder in a program with other registered antibiotics and/or copper bactericides. For the improved performance of Serenade Biofungicide Wettable Powder, add a surfactant [such as Biotune] to the spray tank to improve coverage. Serenade Biofungicide Wettable Powder may be applied to fruit up to and including the day of harvest.

Rate presented In Ibs.lacre unless otherwise noted.

Revised 08 March 8,2007 SERENADE® Biofungicide Wettable Powder MASTER LABEL page 20 of 36 Recommended Application Selected Crops - Agricultural Use Serenade Biofungicide WP has a O-Day PreHarvest Interval for all crops contained on this label Under moderate to severe disease pressure, for improved pertormance, increase rates and reduce spray intervals or use Serenade Biofungicide WP in a tank mix or rotational program with other registered fungicides. Crops Strawberry Sugar Beets Tobacco Tree Nuts Almond Pistachio Pecan Walnut Filberts Chestnut Cashew Beechnut Butternut And other tree nut crops Disease Powdery Mildew Sphaerotheea macularis Erysiphe spp. Anthracnose Colletotrichum acutatum Botrytis Botrytis cinerea Gray Mold Botrytis spp. Angular Leaf Spot Xanthomonas fragariae Powdery Mildew Erysiphe betae Erysiphe polygoni Leaf Spot Cercospora betieola Ramularia Ramularia spp. Rust Uromyces betae Blue Mold Peronospora hyoscyami Walnut Blight Xanthomonas eampestris Alternaria Leaf Spot Alternaria alternata Anthracnose Colletotrichum acutatum Bacterial Canker Pseudomonas syringae Scab Cladosporium earpophilum Botryosphaerla Blight Botryosphaeria dothidea Shot Hole Wilsonomyees carpophilus Xanthomonas pruni Bhumeriella gaapi Cercospora spp. Brown Rot Monilinia spp. Pecan Scab Cladosporium caryigenum Rate Ibs.facre' 2-6 2-6 2- 6 2-6 Application Instructions Botrytis/Powdery mildew - For suppression, begin application at or before flowering and repeat on 7 to 10 day intervals or as needed through harvest. Use higher rates and shorter application intervals under heavy disease pressure. For improved performance, use Serenade Biofungicide Wettable Powder in a tank mix or rotational program with other registered fungicides for powdery mildew and botrytis control. Anthracnose - Begin application prior to disease development and repeat on 7 to 10 day intervals or as needed. Use higher rates and shorter application intervals under heavy disease pressure. For improved performance, use Serenade Biofungicide Wettable Powder in a tank mix or rotational program with other registered fungicides. Angular Leaf Spot - Begin applications when environmental conditions are conducive to disease development. Continue applications on 7 to 10 day intervals or as needed. Use higher rates and shorter appfication intervals under heavy disease pressure. For improved peliormance, use Serenade Biofungicide Wettable Powder in a tank mix or rotational program with other registered fungicides. Thorough coverage is essential. Serenade Biofungicide Wettable Powder may be applied up to and including the day of harvest. Begin applications when environmental conditions are conducive to disease development. Continue applications on 7 to 10 day intervals or as needed. Use higher rates and shorter application intervals under heavy disease pressure. Begin applications when conditions development. Continue applications on needed. are conducive to disease 7 to 10 day intervals or as Walnut Blight - Begin application no later than pistillate bloom and repeat on 7 to 10 day intervals or as needed. Apply in advance of rain for maximum protection. When conditions are conducive'to rapid disease development, for improved control, use Serenade Biofungicide Wettable Powder in a tank-mix or rotational program with a copper-based bactericide registered for control of walnut blight. For all other diseases - Begin application prior to disease development and repeat on 7 to 10 day intervals or as needed.

Rate presented In Ibs.lacre unless otherwise noted.

Revised 08 March 2007 Serenade Biofungicide Wettable Powder Master Label page 21 of 36 Recommended Application Rates for Selected Crops - Agricultural Use Serenade Biofungicide WP has a O-Day PreHarvest Interval for all crops contained on this label Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or use Serenade Biofungicide WP . I I h h . d f ··d In a tank mix or rotationa IJ~.r()B!am w t ot er re~:lIstere unalCI es. Crops Disease Rate Application Instructions Ibs.lacre' Anthracnose Avocado/Mango - Begin application at budbreak and repeat on a 14 Tropical Colletotrichum 2-6 to 21 day interval or as needed through harvest. Fruits gloeosporioides Avocado Colletotrichum ananas Papaya/Pineapple - Begin application at flowering and repeat on a 14 Mango Bacterial Canker to 21 day interval or as needed through harvest. Papaya Bananas Xanthomonas campestris Bacterial Canker - Begin applications when environmental conditions Plantains are conducive to disease development. Pineapple Scab Repeat on 7 to 10 day intervals or as needed. And other Sphaceloma perseae Tropical Fruits Serenade Biofungicide Wettable Powder may be applied to fruit up to and including the day of harvest. Sigatoka 2- 6 Begin application when leaves first appear and repeat on a 7 to 21 day Mycosphaerella interval or as needed. Apply in sufficient water to obtain thorough fijiensis. coverage of foliage. For improved disease control, Serenade Biofungicide Wettable Powder may be tank-mixed with oil or other fungicides registered for control of Sigatoka at labeled rates. When conditions are conducive to rapid disease development and/or heavy disease pressure, higher application rates and rotational spray programs with other fungicides registered for control of Sigatoka are recommended. Botrytis Fruit Rot Kiwi - Begin application at early bloom and repeat on 7 to 10 day Kiwi Botrytis cinerea 2-6 intervals or as needed. Serenade Biofungicide Wettable Powder may Bacterial Blight be applied to fruit up to and including the day of harvest. Pseudomonas viridiflava Pseudomonas syringae Sclerotinia Sclerotinia sclerotiorum Watercress Cercospora leaf spot Begin applications when conditions are conducive to disease Cercospora spp. 2-6 development. Continue applications on 7 to 10 day intervals or as needed. . Seed Powdery Mildew Begin applications when environmental conditions and plant stage are Production Erysiphe spp. 2-6 conducive to disease development. Repeat on 7 to 10 day intervals Crops Rust or as needed. Use higher rates and shorter application intervals under blue grass Puccinia spp. heavy disease pressure. rye grass fescue orchard grass and other crops grown to produce seeds

Rate presented In Ibs.lacre unless otherwise noted.

Revised 08 March 2007 SERENADE® Biofungicide Wettable Powder MASTER LABELpage 22 of 36 Recommended Application Selected Greenhouse Crops Serenade Biofunglcide WP has a O-Day PreHarvest Interval for all crops contained on this label Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or use Serenade Biofungicide WP in a tank mix or rotational program with other registered fungicides. Green­ house Crops Brassica Broccoli Cabbage Cauliflower Brussels Sprouts Collards Kale Mustard Greens Kohlrabi and other Brassica crops Bulb Vegetables Onion Garlic Shallots and other bulb vegetables Diseases Pin Rot Complex AlternarialXanthomonas Bacterial Leaf Spot Pseudomonas syringae Bacterial Soft Rot Erw;n;a / Pseudomonas Black Rot Xanthomonas campestris Xanthomonas Leaf Spot Xanthomonas campestris Alternaria Leaf Spot Alternaria spp. Anthracnose Colletotrichum higginsianum Cercospora Leaf Spot Cercospora brassicicoJa Downy Mildew Peronospora parasitica Peronospora spp. Powdery Mildew Erysiphe polygoni Southern Blight Sclerotium rolfsii Botrytis neck rot Botrytis spp. Botrytis Leaf Blight Botrytis squamosa Onion Purple Blotch Alternaria porri Onion Downy Mildew Peronospora destructor Downy Mildew Peronospora spp. Powdery Mildew Erysiphe spp. White Rot Sclerotium ceDivorum Rust Puccinia porri Rate Ibs.l100 gallons spray mix 2-6 2-6 2-6 Application Instructions Pin Rot - For suppression. begin applications when environmental conditions in the greenhouse are conducive to rapid disease development and repeat on a 7 to 10 day intervals or as needed. Thorough coverage is essential. For improved performance. use Serenade Biofungicide Wettable Powder in a tank mix or rotational program with other registered fungicides. For all other diseases - Begin application soon after emergence or transplant and when conditions in the greenhouse are conducive to disease development. Repeat on a 7 to 10 day interval or as needed. Begin applications when environmental conditions in the greenhouse are conducive to rapid disease development. Continue sprays at 7 to 10 day intervals or as needed. When conditions in the greenhouse are conducive to rapid disease development. use Serenade Biofungicide Wettable Powder in a rotational program with other registered fungicides for Botrytis neck rot control. Thorough coverage is 'essential. For suppression. begin application when conditions are conducive to disease development and repeal on a 7 to 10 day interval or as needed .. Thorough coverage is essential. For improved performance or as a part of a prevantative disease control program. use Serenade Biofungicide Wettable Powder in a tank mix or rotational· program with other registered fungicides for rust control. Do not apply more than 6 lb. product per acre per application.

Revised 08 March 2007 SERENADE® Biofungicide Wettable Powder MASTER LABELpage 23 of 36 Recommended Application Selected Greenhouse Crops Serenade Biofungicide WP has a O-Day PreHarvest Interval for all crops contained on this label Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or use Serenade Biofunoicide WP in a tank mix or rotational Droaram with other reaistered funoicides. Green- Diseases Rate Application Instructions house Ibs./l00 Crops gal\ons spray mix Cucurbits Powdery Mildew Begin application soon after emergence or transplant and when Erysiphe spp. 2-6 environmental conditions in the greenhouse are conducive to disease Cucumber Sphaerotheca spp. development. Repeat on 7 to 10 day interval or as needed. Thorough Cantaloupe Gummy Stem Blight coverage is essential. For improved performance, use Serenade Melon Phoma cucurbitacearum Biofungicide Wettable Powder in a rotational program with other Muskmelon Didymefla bryoniae registered fungicides. Squash Angular Leaf Spot Watermelon Pseudomonas syringae and other Anthracnose cucurbits Colletotrichum lagenarium Downy Mildew Pseudoperonospora cubensis Bacterial Fruit Blotch Acidovorax avenae Fruiting Gray mold Begin applications soon after emergence or transplant and continue on a Vegetables B~trvfis cinerea 2-6 7 to 10 dav interval or as needed. Powdery mildew For suppression, begin application soon after emergence or transplant Pepper Leveillula taurica 2-6 and continue on a 7 to 10 day interval or as needed. Thorough coverage Tomato Oidiopsis taurica is essential. Use maximum label rates under conditions conducive to Eggplant Erysiphe spp. rapid disease development. For improved performance, use Serenade and other Sphaerotheca spp. Biofungicide Wettable Powder in a tank mix or rotational program with fruiting Downy Mildew other registered fungicides for powdery mildew control. vegetables Pseudoperonospora cubensis Bacterial Speck 2- 6 Begin application soon after emergence or transplant and when Pseudomonas syringae environmental conditions are conducive to disease development. pv tomato Continue applications on a 5 to 7 day interval or as needed. Use higher rates when conditions are conducive to rapid disease development. For improved performance, use Serenade Biofungicide Wettable Powder in a tank mix or in a rotational oroaram with other reaistered funaicides. Bacterial Spot Begin application soon after emergence or transplant and when Xanthomonas spp. 2-6 environmental conditions are conducive to disease development. Continue applications on a 5 to 7 day interval or as needed. When Target Spot conditions are conducive to rapid disease development, for improved Corynespora cassliicola control, use Serenade Biofungicide Wettable Powder in a tank mix program with copper-based bactericides registered for control of bacterial soot. Buck-eye Rot 2-6 Begin application soon after emergence or transplant and continue on a 7 Phytophthora parasitica to 10 day interval or as needed. For improved performance of Serenade Anthracnose Biofungicide Wettable Powder add a surfactant [such as BiotuneJ to the Colletotrichum candidum SDrav tank to imorove coveraae. Bacterial Canker 2-6 Begin applications when environmental conditions are conducive to Clavibacter disease development. Repeat on 7 to 10 day intervals or as needed. michiaanensis Early Blight For suppression, begin application when plants are 4 to 6 inches high. Alternaria solani 2-6 Repeat applications on a 5 to 7 day interval or as needed. For improved Late Blight performance, use Serenade Biofungicide Wettable Powder in a tank mix Phytophthora infestans or rotational program with other registered fungiCides for late blight suppression control. Use shorter spray intervals under conditions conducive to rapid disease development.

Revised 08 March 2007 SERENADE® Biofungicide Wettable Powder MASTER LABELpage 24 of36 Recommended Application Selected Greenhouse Crops Serenade Biofungicide WP has a O-Day PreHarvest Interval for all crops contained on this label Under moderate to severe disease pressure, for improved pertormance, increase rates and reduce spray intervals or use Serenade Biofun~icide WP in a tank mix or rolational program with other regIstered fungicides. Green­ house Crops Herbsl Spices Leafy Vegetables Lettuce Celery Spinach Parsley Radicchio and other leafy vegetables Diseases Bacterial Blight Pseudomonas syringae Anthracnose Colletotrichum spp. Alternaria Leaf Blight Alternaria spp. Botry1is Botrytis spp. Downy Mildew Bremia laetucae Peronospora spp. Powdery Mildew Erysiphe cichoracearum Erysiphe spp. Pink Rot Sclerotinia sclerotiorum Anthracnose Colletotrichum spp. Bacterial Leaf Spot Xanthomonas campestris pv. vitians Bacterial Blight Xanthomonas campestris Sclerotinia Head and Leaf Drop $cJerotinia spp. Rate Ibs.l100 gallons spray mix 2-6 2-6 2-6 Application Instructions Begin application when environmental conditions in the greenhouse are conducive to disease development. Repeat on a 7 to 10 day interval or as needed. Downy mildew I powdery mildew - For suppression, begin application when conditions are conducive to disease development and repeat on a 7 to 10 day interval or as needed. For improved performance, use Serenade Biofungicide Wettable Powder in a tank mix or rotational program with other registered fungicides for downy mildew and powdery mildew control. Pink rot - Begin application approximately 8 weeks before harvest and repeat on a 14 day interval. Apply Serenade Biolungicide Wettable Powder as a directed spray in sufficient water to ensure thorough coverage of the base of the plants and the surrounding soil surface. Light irrigation following application to incorporate Serenade Biofungicide Wettable Powder may improve disease control. Anthracnose - Begin application prior to disease development when environmental conditions and plant stage are conducive to rapid disease development and repeat on a day 7 to 10 day interval or as needed. Use higher rates and shorter application intervals under heavy disease pressure. Bacterial Blight IBacterial Leaf Spot· Begin applications when environmental conditions are conducive to disease development. Repeat on 7 to 10 day intervals or as needed. For control of early Sclerotinia head and leaf drop: Apply at planting or immediately following planting but prior to crop emergence as a 4 to 6 inch seed line treatment. Make a second application as a directed spray with multiple nozzles per each seed line in sufficient water to ensure thorough coverage of lower plant leaves and surrounding soil surface within 7 days of thinning. Repeat applications on 10 to 14 day intervals il conditions for disease development persist. Use higher rates under conditions conducive to moderate to severe disease pressure. Light irrigation after application to incorporate the product may improve disease control. OR For control of Sclero!lnia head and leaf drop: Apply as a directed spray with multiple nozzles per each seed line in sufficient water to ensure thorough coverage of lower plant leaves and surrounding soil surface within 7 days 01 thinning or transplanting. Repeat applications on 10 to 14 day intervals if conditions for disease development persist. Use higher rates under conditions conducive to moderate to severe disease pressure. Light irrigation after application to incorporate the product may improve disease control.

;) 713<l Revised 08 March 2007 SERENADE® Biofungicide Wettable Powder MASTER LABELpage 25 of36 Recommended Application Selected Greenhouse Crops Serenade Biofungicide WP has a Q-Day PreHarvest Interval for all crops contained on this label Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or ·d WP· I k· I f I "lh h . d f ··d use Serenade Biofungici e ma an mix or ro a lonal prO!;lram WI ot er re(::ustere unQICI es. Green- Diseases Rate Application Instructions house Ibs.l100 Crops gallons spray mix Rooll Black Roll Begin application soon after emergence or transplant and when conditions Tuber Black Crown Rol 2-6 are conducive to disease development. Repeat on a 7 to 10 day interval Altemana spp. or as needed. Use high rates and shorter inteNals when conditions are Carrot Alternaria Leaf Blight conducive to rapid disease development. Apply in sufficient water to Potato Alternaria dauci provide thorough coverage. Sweet Baclerial Leaf Spot Potato Xanthomonas Beets camoestris pv. carofae Ginger Baclerial Leaf Blighl Begin application soon after emergence ar transplant and when conditions Horseradish XanthO(T1onas 2-6 are conducive to disease development. Repeat on a 7 to 10 day interval Radish campestris or as needed. Use high rates and shorter intervals when conditions Ginseng Downy Mildew are conducive to rapid disease development. Apply in sufficient Turnip and Peronospora spp. water to provide thorough coverage. ather rootl Powdery Mildew tuber crops ErySiphe spp. Gray Mold Botrytis spp. White Mold Sc/erotinia sclerotiorum Early Blight For suppression, begin application soon after emergence and when Alternaria so/ani conditions are conducive to disease development. Repeat on a 5 to 7 day Late Blight suppression 2-6 interval or as needed. For improved performance, use Serenade Phytopfl/hora infestans Biofungicide Wettable Powder in a tank mix or rotational program with other registered fungicides for late blight control. Slrawberry Powdery Mildew Botry1islPowdery mildew • For suppression. begin application. at or Sphaerotheca macularis 2-6 before flowering and repeat on a 7 to 10 day interval or as needed Erysiphe spp. through harvest. For improved performance. use Serenade Biofungicide AnthraCflose Wettable Powder in a tank mix or rotational program with other registered Colletotrichum acutatum fungicides for powdery mildew and botrytis control. Bolry1is Botrytis cinerea Anthracnose - Begin application prior to disease development and Gray Mold repeat on a 7 to 10 day interval or as needed. Botrytis spp. Angular Leaf Spot Angular Leaf Spot· Begin application when conditions are conducive to Xanthomonas disease development. Continue sprays at 7 to 10 day intervals or as fragana@ needed. Use high rates and shorter intervals when conditions are conducive to rapid disease development. For improved performance, use Serenade Biofungicide Wettable. Powder in a tank mix or rotational program with other registered fungicides. Thorough coverage is essential. Serenade Biofungicide Wettable Powder may be applied up to and including the day of harvest.

Revised 08 March 2007 SERENADE® Blofunglcide Wettable Powder MASTER LABEL page 26 006 FOR USE ON ORNAMENTALS, TREES, SHRUBS, FLOWERS, BEDDING PLANTS, TROPICAL PLANTS (ORNAMENTALS - Poinsettia, Orchids, Dieffenbachla, Palms, SpathlphyUum, Rhaphlolepsls, Aglaonema and FRUIT - Bananas, Mangos, Papaya), TURF, LAWNS, SOD, GOLF COURSES (GREENS, TEES, FAIRWAYS AND ROUGHS), SEEDLINGS, CONIFERS [Agricultural Use], [Commercial], [Residential Use] [Reforestation] FOR USE ON TURF, ORNAMENTALS, TREES, SHRUBS- Serenade Biofungicide Wettable Powder is a protectant fungicide for use indoors and outdoors for control of certain foliar diseases in the field, greenhouses [open or enclosed1, interiorscape, residential and commercial landscapes, nurseries [open or enclosed1 shade house environments, seedling production sites, golf courses (greens, tees, fairways and roughs), forests, forestry seedling production sites. Serenade Biofungicide Wettable Powder can be applied to ornamentals, trees, shrubs, flowers, annual and perennial bedding plants, potted flowers, cut flowers, tropical foliage, container grown trees and shrubs, forestry seedlings, turf, lawns, sad, golf courses (greens, tees, fairways and roughs) and conifer production for reforestation purposes (greenhouses, shade houses, nurseries. indoors, outdoors, containers or field). Foliar Application Use on Ornamentals. Tr"s_ Shrubs_ Flowers. Bedding Planta. Tropical Plants. Seedlings, Conifers: APPLICATION INSTRUCTIONS: Apply Serenade Biofungicide Wettable Powder at rates ranging from 2 to 6 Ibs. of product in 100 gallons of water per acre. Make applications on a 3 to 10 day schedule. Begin applications when condaions favor disease development prior to the onset of disease. [Begin applications prior to or in the early stages of disease development.1 Under nonnal conditions apply Serenade Biofungicide Wettable Powder at a rate of 4lbs. of product per 100 gallons of spray solution per acre on a 7-day schedule. When conditions favor severe disease development shorten the spray interval or use a higher rate. Thorough coverage is essential for effective disease control. When more diluted or concentrated spray solutions are needed for the type of equipment being used, follow the 'Use Determination" section of this label. See application rate tables for more detailed application instructions. PLANTS EVALUATED FOR PHYTOTOXICITY Serenade Biofungicide Wettable Powder has been tested for phytotoxicity on the ornamental species listed below. Since it is impossible to test all of the species and cultivars listed on this label under all conditions it is recommended that a small-scale preliminary trial be conducted to check for sensitivity before using this product on a large number of plants, using the product in accordance with all label use directions. TABLE 1 PLANTS EVALUATED FOR PHYTOTOXICITY Annual and Perennial Flowering Plants: Alyssum Asters Begonia Calla lily Chrysanthemum Cyclamen Dwarf Bee-Balm Garden phlox Golden star Kalanchoe Lobelia Pansies Portulaca Sa/via spp. Verbena spp. Zinnias Spirea Geraniums Hydrangea Linaria Marigolds Petunia Ranunculus Snapdragons Vinca Azalea Dianthus Easter lily Gerbera Impatiens Lisianthus Orchids Poinsettia Roses Stock Violas Tropical foliage: Aglaonema Dracaena spp. Hibiscus Spathiphyllum Dieffenbachia English Ivy Leatherleaf Fern Trees and Shrubs: Azalea Crape myrtle Jumbo azalea Japanese maple Lilac Photinia Rosaceae spp. Boxwood Dogwood Indian Hawthom Ligustrum japonicum Loropetalum Rhododendron Soli Touch Holly

J-tt \3~ Revised 08 March 2007 SERENADE® Biofungicide Wettable Powder MASTER LABEL page 27 of36 FOR USE AS SOIL DRENCH APPLICATIONS on Ornamentals, Trees, Shrubs, Flowers, Bedding Plants, Tropical Plants, Seedlings, Conifers: [Agricultural], [Commercial], [Residential Use] [Indoors and Outdoors] [Greenhouses, Glasshouses, Nurseries] [Open and Enclosed] Serenade Biofungicide Wettable Powder is a broad spectrum biofungicide for the prevention, suppression and control of soil borne diseases on a wide range of annual and perennial bedding plants, potted flowers, foliage plants, deciduous trees and shrubs, and fruits and vegetables grown in protected environments. Serenade Biofungicide Wettable Powder enhances germination and plant growth by suppressing diseases caused by RhizQctonia, Pythium, Fusarium and Phytophthora. APPLICATION INSTRUCTIONS: Mix 2 lb. to 6 lb. of Serenade Biofungicide Wettable Powder with 100 gallons of water. Use higher application rates under conditions of heavy disease pressure. Apply finished mixture at a rate to thoroughly soak the growing media through the root zone (1 pint I sq. ft. for each 3 inches of soil depth) as a drench or directed spray using hand held, mechanical or motorized spray equipment, or as a chemigation drench or directed spray using applicable sprinkler irrigation systems. Begin applications during or after seeding, sticking of cuttings or after transplanting to propagation beds, containers, pots or trays. Optimal performance is obtained with preventative treatments repeated every 21 - 28 days throughout the growing cycle. Serenade Biofungicide Wettable Powder can be mixed with chemical fungicides registered for soil applications. See application rates tables for rates and application instructions. FOR USE ON TURF, LAWNS, SOD, GOLF COURSES (GREENS, TEES, FAIRWAYS AND ROUGHS) ORNAMENTAL TURF- [Agricultural), [Commercial), [ReSidential Use) Serenade Biofungicide Wettable Powder is a broad spectrum biofungicide for use in the prevention, suppression and aiding in control of turf and lawn diseases; brown patch, dollar spot, powdery mildew, rust and anthracnose. Turf. Lawns. Sod. Greens. Ornamental Turf Use: APPLICATION INSTRUCTIONS: Apply at the rate of 2 to 6 oz. of Serenade Biofungicide Wettable Powder per 1000 sq. ft. of surface area. Apply in sufficient water to provide thorough coverage, depending on the application equipment. Two gallons of water per 1000 sq. ft of surface is commonly used. See application rate tables for more detailed application instructions.

Revised 08 March 2007 SERE!liADE® Biofungkide Weltable Powder MASTER LABEL ~o( ?/6 page 28 of 36 Application Rates for Turf, Lawns, Sod, Golf Courses (Greens, Tees, Fairways and Roughs), Ornamental Turf Serenade Biofunglcide Wettable Powder has a O-Day PreHarvest Interval for all crops contained on this label. Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or use Serenade Biofungicide Wettable Powder in a tank mix or rotational program with other registered fungicides. Crops Disease Rate Application Instructions /1000 sq. ft of surface area Turf, Brown patch Apply at the rate of 2 to 6 oz. of Serenade Biofungicide Wettable Powder Sod. Rhizoctonia salam' 2-6 oz. per 1000 sq. ft. of surface area. Apply in sufficient water to provide Lawns, Golf Doliar Spot thorough coverage, depending on the application equipment. Two Course, Lanzia spp., gallons of water per 1000 sq. ft of surface is commonly used. (Fairways, Moellerodiscus spp. Roughs, Greens, Sclerotinia homeocarpa Begin applications when conditions are conducive to disease Tees) development. Continue applications on 7 to 10 day intervals or as Seed production Powdery Mildew needed. Under moderate to severe disease pressure, for improved grasses, etc. Erysiphe graminis performance, increase rates and reduce spray intervals or use Serenade Biofungicide Wettable Powder in a tank mix or rotational program with Rust other registered fungicides. Bluegrass Puccinia spp Bentgrass Anthracnose Aids in control of; brown patch, doliar spot, powdery mildew, rust Bermuda grass Colletotrichum and anthracnose. Dichondra graminicola Fescue Orchard [Optional/Alternate Statements/Examples of Mixing/Application grass Instructions are in Brackets below} Poa annua [Mix at the rate of 1 to 3 oz. of Serenade Biofungicide Wettable Powder St. Augustine per ga/lon of water and apply spray solution at the rate of 2 gallons per Ryegrass 1000 sq. ft. (equivalent to 2 to 6 oz. of product per 1000 sq. ft. of turf.] Zoyia Mixtures {Mix at the rate of 2 to 6 oz of Serenade Biofungicide Wettable Powder and other per gallon of water and spray solution at the rate of one gallon per 1000 grasses or sq. ft. of turf. ornamental turf [Mix at the rate of 3 oz. of Serenade Biofungicide Wettable Powder per gallon of water when included in a tank mix with other registered fungicides.]

Revised 08 March 2007 SERENADE®Biofungicide Wettable Powder MASTER LABEL page 29 of 36 Application Rates for Use as a Foliar Spray on Ornamentals, Trees, Shrubs, Flowering Plants Serenade Biofungicide Wettable Powder has a O-Day PreHarvest Interval for all crops contained on this label. Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or use Serenade Biofungicide Wettable Powder in a tank mix or rotational program with other registered fungicides. Crops Disease Rate Application Instructions Ibs.J100 gallons spray mix Ornamentals Anthracnose -- 2-6 Trees. Shrubs Colfetotrichum spp. Indoors, Outdoors, Field, Greenhouse, and Nursery Grown Plants: Flowering Plants Apply Serenade Biofungicide Wettable Powder at rates ranging from 2-6 Tropical Plants Bacteria - Ibs. of product in 100 gallons of water per acre. Make applications on a 3 Erwinia spp. to 10 day schedule. Begin applications when conditions favor disease Pseudomonas spp. development prior to the onset of disease. [Begin applications prior to or Fields. Outdoors. Xanthomonas spp. in the early stages of disease development.] Indoors, Greenhouses, Black spot of rose - Under normal conditions apply Serenade Biofungicide Wettable Powder Nurseries Diplocarpon rosae at a rate of 4 pounds of product per 100 gallons of spray solution per acre on a 7 day schedule. When conditions favor severe disease Annuals Botrytis - development shorten the spray interval or use a higher rate. Thorough Perennials Botrytis cinerea coverage is essential for effective disease control. When more diluted or Bedding plants concentrated spray solutions are needed for the type of equipment being Potted flowers Downy Mildew - used, follow the "Use Determination" section of this label. Cut flowers Peronospora spp. Foliage plants Deciduous trees Leaf spots- Deciduous shrubs Alternaria spp. Tropical foliage Cercospora spp. Container grown Entomosporium spp. plants Helminthsporium spp. Myrothecium spp. Septaria spp. . Powdery mildew - Erysiphe spp. Oidiumspp. Podosphaera spp. Sphaerotheca spp. Phytophthora spp. -- Rust- Puccinia spp. Scab- Venturia spp.

Revised 08 March 2007SERENADE®Biofungicide Wettable Powder MASTER LABEL paEe 30 of 36 Application Rates for Soil Drench Uses in Field, Greenhouses, Shade houses, Nurseries [Outdoors and Indoors) [Open or Enclosed) Serenade Biofungicide Wettable Powder has a O-Day Pre Harvest Interval for all crops contained on this label. Under moderate to severe disease pressure, for improved performance, increase rates and reduce spray intervals or use Serenade Biofuo.9Jcide Wettable Powder in a tank mix or rotational program with other reoistered funqicides. Crops Disease Rate' Application Instructions Lbs.l100 gallons spray mix Ornamentals Rhizocfonia spp. 2-6 Soil Drench Uses: Field, Greenhouses, Glasshouse, Shadehouses, Trees pythium spp. Indoors/Outdoors, Open And Enclosed Nurseries Shrubs Fusarium spp. Annuals Phytophthora spp. Mix 2 lb. to 6 lb. of Serenade Biofungicide Wettable Powder with 100 Perennials gallons of water. Use higher application rates under conditions of heavy Flowering plants disease pressure. Tropical plants Bedding plants Apply finished mixture at a rate to thoroughly soak the growing media Container plants thro~gh the root zone (1 pint I sq. ft. for each 3 inches of soil depth) as a Potted plants drench or directed spray using hand held, mechanical or motorized spray Foliage plants equipment, or as a chemigation drench or directed spray using applicable Deciduous trees sprinkler irrigation systems. Begin applications during or after seeding, Deciduous shrubs sticking of cuttings or after transplanting to propagation beds, containers, Forestry pots or trays. Optimal performance is obtained with preventative Seedlings treatments repeated every 21 - 28 days throughout the growing cycle. Fruits Serenade Biofungicide Wettable Powder can be mixed with chemical Vegetables fungicides registered for soil applications. and other crops grown in greenhouses and open and enclosed nurseries , Rate presented on pounds/1 00 gallons of spray mIx otherwIse noted.

Revised 08 March 2007 SERENADE® Biofungicide Wettable Powder MASTER LABEL page 31 of 36 Home & Garden SUB LABEL Serenade Biofungicide Wettable Powder® A Wettable Powder Blofungicide [For Home and Garden Use] [For Home, Garden and Lawn (Turf) Use] [Optional/Altemate Statements] [Alternate Name: Serenade ® Garden Disease Control Wettable Powder] [Optional Claims:] [Attacks over 40 diseases] [Attacks both fungal & bacterial diseases] [Apply any time of day] {Will not burn or injure leaves, lawns (turf)] [Fungicide (or Biofungicide) that attacks harmful garden and lawn diseases] [Use on Roses, Vegetables, Fruits, Flowering Plants, Trees, Shrubs and Lawns (Turf)] [Controls Bacterial Spot, Powdery Mildew, Rust, Grey Mold, Leaf Blight, Scab] [Same active ingredient used by farmers1 (Optional Claims for Lawn and Turf Label:] [Prevents and controls harmful (major) Jawn diseases (including brown patch, dollar spot)"] [Controls Brown Patch, dollar spot and other common lawn diseases] [Use anytime on all lawns to prevent and control major lawn diseases] [Promotes healthy disease-free lawns] ["Easy! Attach Hose and Spray"l {Same active ingredient used on golf courses] [Promotes Greener, Healthier Lawns] ACTIVE INGREDIENT QST 713 strain of dried Bacillus subtiUs ..... 10% OTHER INGREDIENTS ... Total .. . ............... 900/0 .100.0% Contains a minimum of 5 x 109 cfu/g EPA Reg. No. 69592-4 EPA Est. No.: 69592- MEX-1 67545- AZ-l 66728- GA-2 37429- GA-2 69592- CA-, 5 Superscript corresponds to last digit of lot number stamped on container u.s. Patent Nos. 6,060,051, 6,103,228,6,291,426, and 6,417,163 on QST 713 strain of Bacillus subtilis Net weight: [For smaller container sizes:] KEEP OUT OF REACH OF CHILDREN CAUTION [See attached booklet for First Aid Statements.] [Peel back tab for First Aid and Precautionary Statements and Directions for Use.]

---

Revised 08 March 2007 SERENADE® Biofungicide Wettable Powder MASTER LABEL page 32 of 36 PRECAUTIONARY STATEMENTS-Home and Garden HAZARDS TO HUMANS & DOMESTIC ANIMALS CAUTION Harmful if inhaled. Avoid breathing spray mis!. Harmful if absorbed through skin. Prolonged or frequently repeated skin contact may cause allergic reactions in some individuals. Avoid contact with skin, eyes or clothing. Wash thoroughly with soap and water after handling. Causes moderate eye irritation. Remove contaminated clothing and wash clothing before reuse. FIRST AID IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth-to-mouth if possible. Call a poison control center or doctor for further treatment advice. IF ON SKIN: Take off contaminated clothing. Rinse skin with plenty of water for 15-20 minutes. Call a poison control center or doctor for further treatment advice. IF IN EYES: Hold eyes open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present after the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice. Have the product label with you when calling a poison control center or doctor. ENVIRONMENTAL HAZARDS - Home and Garden Do not apply directly to water, Do not contaminate water when disposing of equipment wash waters or rinsate. DIRECTIONS FOR USE - Home and Garden It is a violation of Federal law to use this product in a manner inconsistent with its labeling. GENERAL USE INFORMATION - Home and Garden Serenade Biofungicide Wettable Powder [Alternate Statement: is a broad spectrum, preventative biofungicide recommended for the control or suppression of many important plant diseases and) [Alternate Statement: effectively controls or prevents a wide range of important fungal and bacterial plant diseases and] [Serenade Biofungicide Wettable Powder] may be used on roses, vegetables, fruits, nuts, flowers, houseplants, foliage, trees, shrubs, lawns, turf, sod, and ornamental turf r located in residential landscapes]. [Serenade Biofungicide Wettable Powder may be applied any time of day, in full sun and high temperatures, without stressing or burning foliage.] As a general precaution, when exposed to high concentrations of a Jiving microbial product such as this, wear a dust particle mask when applying this product.

Re'ised 08 March 2007 SERENADE®Biofungicide Wettable Powder MASTER LABEL page 33 of36 MIXING AND APPLICATION INSTRUCTIONS - Home and Garden Serenade Biofungicide Wettable Powder can be applied in commonly used pressurized hand-held sprayers, and spray trigger bottles. Spray to ensure thorough coverage of the plant. For best results. treat prior to foliar disease development or at the first sign of foliar disease infection. Repeat at 7 day intervals or as needed. [Under conditions of high disease pressure] When environmental conditions favor rapid disease development (high humidity, excessive rain, extreme moisture condition, etc.) spray more often [Alternate: shorten the spray interval]. Serenade Biofungicide Wettable Powder can be applied up to and including the day of harvest. Pressurized Hand-Held Sprayer Application Instructions: Mixing and Application: For all applications mix the spray solution thoroughly and keep spray solution agitated during application. Do not allow spray mixture to stand overnight orfor prolonged periods. For Fruits, Vegetables, Nuts (e. g. Apples/Pears, Broccoli, Carrot, Cherries, Cucurbits, Grapes, Leafy Vegetables, Onions/Garlic, Pepper, Tomato, and Walnuts): mix Yo cup to 1 cup [(Yo cup = 4 TBSe> to 1 cup = 16 TBSP)] of Serenade Biofungicide Wettable Powder per gallon of water. Spray plants to runoff, covering both top and bottom surface of foliage to ensure thorough coverage. For Annual and Perennial Ornamental Plants, Flowering Plants, Tropical Foliage, Trees and Shrubs: mix Yo cup to 1 cup [(Yo cup = 4 TBSP to 1 cup = 16 TBSP)]. of Serenade Biofungicide Wettable Powder per gallon of water. Spray plants to runoff, covering both top and bottom surface of foliage to ensure thorough coverage. For Lawns, Turf and Ornamental Turf: mix 6 TBSP of Serenade Biofungicide Wettable Powder per gallon of water. Apply at a rate of 1 gallon of spray solution per 500 square feet. [optional/alternate: For Lawns, Turf and Ornamental Turf: mix 3 TBSP of Serenade Biofungicide Wettable Powder per gallon of water. Apply at a rate of 2 gallon of spray solution per 500 square feet.] [Serenade Biofungicide Wettable Powder) MAY BE USED ON [THE FOLLOWING): [Alternate: VEGETABLES, FRUIT, NUTS, AND ORNAMENTAL PLANTS) [Alternate; PLANTS, CROPS, SITES) PLANTS [CROPS, SITES): HOME and GARDEN (VEGETABLE, FRUIT AND NUTS) PLANTS: Artichoke. Asparagus Berries (Blueberries, Blackberry, Raspberry. Loganberry, Huckleberry. Cranberry, Gooseberry, Elderberry, Currant, Caneberry, and other berry crops) Brassica (Broccoli. Cabbage, Cauliflower, Brussels Sprouts, Collards, Kale, Mustard Greens, Kohlrabi and other Brassica crops) Bulb Vegetables (Onion. Garlic, Shallots and other bulb vegetables) Citrus (Orange, Grapefruit, lemon, Tangerine, Tangelo, Pummelo and other citrus crops) Cucurbits (Cucumber. Cantaloupe, Melon, Muskmelon, Squash, Watermelon and other cucurbit crops) Fruiting Vegetables (Pepper, Tomato, Eggplant and other fruiting vegetables) Grape. Herbs/ Spices, Hop Leafy Vegetables (Lettuce. Celery, Spinach, Parsley, Radicchio and other leafy vegetable crops) Legumes/vegetables (Beans, Green beans, Snap beans. Shell beans, Dry Beans, Garbanzo beans, Lima beans, Peas, Chick peas, Split peas. Lentils and other legume/ vegetable crops) Mango, Mint, Olive, Papaya, Peanuts

Revised 08 March 2007 SERENADE® Biofungicidc Wettable Powder MASTER LABEL page 34 of36 Porne Fruit (Apple, Crabapple, Pear, Quince, Mayhaw and other porne fruit) Root I Tuber (Carrot, Potato, SWeet Potato, Beets, Ginger, Horseradish, Radish, Ginseng, Turnip and other rooU tuber crops) Roses Stone Fruit (Apricot, Cherry, Nectarine, Peach, Plum, Prune, and other stone fruit crops) Strawberry. Sweet Corn, Tobacco, Watercress Tree Nut (Almond. Pistachio, Pecan, Walnut, Filberts, Chestnut, Cashew, Beechnut, Buttemut and other tree nut crops) GREENHOUSE PLANTS: Brassica (Broccoli, Cabbage, Cauliflower, Brussels Sprouts, Collards, Kale, Mustard Greens, Kohlrabi and other Brassica crops) Bulb Vegetables (Onion, Garlic. Shallots and other bulb vegetabies) Cucurbits (Cucumber, Cantaloupe. Melon, Muskmelon, Squash, Watermelon and other cucurbits) Fruiting Vegetables (Pepper, Tomato, Eggplant and other fruiting vegetables) Herbsl Spices Leafy Vegetables (Lettuce. Celery. Spinach, Parsley. Radicchio. and other leafy vegetables) Root I Tuber (Carrot, Potato, Sweet Potato, Beets, Ginger, Horseradish, Radish, Ginseng, Turnip and other rooU tuber crops) Strawberry ORNAMENTALS. TREES. SHRUBS. FLOWERING PLANTS. TROPICAL PLANTS: PLANTS EVALUATED FOR PHYTOTOXICITY Annual and Perennial Flowering Plants: Alyssum Asters Begonia Calla lily Chrysanthemum Cyclamen Dwarf Bee-Balm Easter lily Garden phlox Geraniums Golden star Hydrangea Kalanchoe Linaria Lobelia Marigolds Pansies Petunia Portulaca Ranunculus Salvia spp. Snapdragons Verbena spp. Vinca Zinnias Tropical foliage: Aglaonema Dracaena spp. Hibiscus Spathiphyllum Dieffenbachia English Ivy Leatherleaf Fern Trees and Shrubs: Azalea Boxwood Dogwood Azalea Dianthus Gerbera Impatiens Lisianthus Orchids Poinsettia Roses Stock Violas Crape myrtle Jumbo azalea Japanese maple Lilac Photinia Rosaceae spp. Spirea Indian Hawthorn Ligustrum japon;cum Loropetalum Rhododendron Soft Touch Holly

Revised 08 March 2007 SERENADE®Biofungicide Wettable Powder MASTER LABEL page 35 of 36 [Optional Statement; It is impossible to test all plants for phytotoxicity. To assure that the plants to be treated are not sensitive to the treatment, apply a small amount of the highest application rate of the product to a few leaves or the above ground portion of a plant and check within 3 days. Use product according to label directions.] DISEASES CONTROLLED [OR SUPRESSED) [OR PREVENTED) [BY SERENADE BIOFUNGICIDE WETTABLE POWDER) [ON VEGETABLES, FRUIT, NUTS, ORNAMENTAL PLANTS) [Alternate; ON PLANTS, CROPS, SITES) Anthracnose - Colletotrichum spp. Bacteria-Erwinia spp, Pseudomonas spp, Xanthomonas spp. Bacterial Leaf Blight (Xanthomonas campestris) Bacterial Speck (Pseudomonas syringae pv. Tomato Bacterial Spot (Xanthomonas spp.) - suppression Bean Rust (Uromyees appendieulatus) - suppression Black Mold (Alternaria alternata) Black Root Rot IBlack Crown Rot (Alternaria spp.) Black spot of rose -- Diplocarpon rosea Botrytis (Botrytis spp) Botrytis Leaf Blight (Botrytis squamosa) Botrytis Neck Rot (Botrytis spp.) Downy Mildew (Sremia laelucae, Peronospora spp., and Plasmopara vitjco/a) - suppression Early Blight (Alternaria solani) - suppression Fire Blight (Erwinia amy/ovora) - suppression Gray Mold (Botrytis cinerea) Greasy spot (Myeosphaerella citri) - suppression Late Blight (Phytophthora infestans) - suppression Leaf spots - (Alternaria spp, Cercospora spp, Entomosporium spp, Helminthsporium spp, Myrothecium spp, Septaria spp.) Onion Downy Mildew (Peronospora destructor) Onion Purple Blotch (Alternaria porri) Phytophthora spp Pin Rot (Alternaria lXanthomonas complex) - suppression Powdery Mildew (Uncinula necator Erysiphe spp., Sphaerotheca spp., Oidiapsis faurica, Leveillula taurica, Podosphaera leucotricha) Powdery Mildew - Erysiphe spp, Oidium spp, Podosphaera spp, Sphaerotheca spp Rust - Puccinia spp. Scab (Venturia spp.) - suppression Sclerotinia head and leaf drop (Sclerotinia spp.) Sour Rot

Revised 08 March 2007 SERENADE(K) Biofungicide Wettable Powder MASTER LABEL page 36 of 36 Target Spot (Corynespora eassiico/a) Walnut Blight (Xanthomonas campestris) White Mold (Sc/erotini;) sc/erotiorum) - suppression [SERENADE BIOFUNGICIDE WETIABLE POWDER] MAY BE USED ON LAWNS, TURF AND ORNAMENTAL TURF and Golf Courses (Fairways, GREENS, roughs, tees). LAWNS, TURF AND ORNAMENTAL TURF, GOLF COURSES (Fairways, GREENS. Roughs, Tees): Bluegrass, Bentgrass, Bermuda grass, Dichondra, Fescue, Orchard grass, Poa annua, St. Augustine, Ryegrass, Zoyia, Mixtures and other grasses or ornamental turf. DISEASES CONTROlLED [OR SUPRESSED] [OR PREVENTED] [BY SERENADE BIOFUNGICIDE WETIABLE POWDER] [ON LAWNS, TURF AND ORNAMENTAL TURF and Golf Courses (Fairways, GREENS, roughs, tees).] Lawn and Turf Diseases: Brown patch (Rhizoetonia so/ani) Dollar Spot (Lanzia spp., Moellerodiscus, spp. fonnerly Se/erot/nis homeocarpa) Powdery Mildew (Erysiphe gramin/s) Rust (Pueeinia spp.) Anthracnose (Col/etotdehum gram/nico/a) STORAGE AND DISPOSAL - Home and Garden STORAGE: Store in o(iginal container only, [Alternate: in an area inaccessible to children] [or Alternate: out of reach of children]. Keep container closed when not in use. CONTAINER DISPOSAL: If empty: Do not reuse this container. Place in trash or offer for recycling if available. If partly filled: Call your local solid waste agency for disposal instructions. Never place unused product down any indoor or outdoor drain. CONDITIONS FOR SALE AND WARRANTY Except to the ex1ent prohibited by applicable law. AgraQuest offers this product with the following conditions: 1) buyers and users of this product assume the risk of any storage, handling or use contrary to AgraQues!'s label and directions and 2) AgraQuest's liability shall in no case exceed the purchase price of the applicable AgraQuest product. Questions or Comments call 800 962-8980 www.agraguest.co!l! Serenade ® is a registered trademark of AgraQuest, Inc. © Copyright AgraQuest, Inc., 2007 AgraQuest. Inc. 1530 Drew Avenue Davis. California 95618 www.agraquest.com