Dockerfile: self-contained image with corpus + Chroma + BM25 baked in. Drawbar's compose pulls + runs without volume mounts. Built from sources.json (labels schema), PRODUCT_NAME=crop_chem by default, HYBRID_SEARCH=true (always-on for production quality). RERANK_URL + OLLAMA_URL get set at compose time. .gitea/workflows/refresh.yml: monthly cron (1st @ 06:00 UTC) does full scrape → reindex → image push. Scrapes Bayer (~30 min) + EPA PPLS row-crop filtered (~7h). Skips reindex+push if no corpus diff. Tags pushed: :latest, :<sha12>, :corpus-<YYYY.MM.DD>. .gitea/workflows/image-only.yml: on-demand or auto on code-only pushes to main (paths: docs_mcp/, rag/, scrape/, requirements.txt, Dockerfile, sources.json). Reindexes from committed corpus, builds image, pushes. ~10 min vs ~9h full refresh. .gitignore: corpus/ now COMMITTED (4,159 labels, 265 MB of .md + sidecars). Lets image-only.yml rebuild indexes without re-scraping. chroma/ + bm25/ still gitignored (regenerable binary indexes). .dockerignore: drops venv, eval results, PLAN/README/CLAUDE.md, deploy/, .git/ — keeps the image lean. corpus + chroma + bm25 explicitly NOT in dockerignore (those go INTO the image). Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
60 KiB
TERRANIL 90DF WSP
- EPA Reg No: 9779-328
- Registrant: WINFIELD SOLUTIONS, LLC
- Signal word: Danger
- Active ingredients: Chlorothalonil (90%)
- Label accepted: 2002-05-16
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/009779-00328-20020516.pdf
(
'
Page 1 of 16
Terranil™ gOOF WSP
Agricultural, Turf and Ornamental Fungicide
(90% water dispersible granules)
ACTIVE INGREDIENT
Chlorothalonil (tetrachlorolsophthalonhnle) ••.•..... : ............... : ...................................... 90.0%
INERT INGREDIENTS ............................................................................................. ~
TOTAL ..................................................................................................................... 100.0%
Each water soluble packet contains 2 % Ibs. of Chlorothalonil per 2 , lb. Packet (or 1 1!B Ibs. per each 1 ,% lb .. packet)
KEEP OUT OF REACH OF CHILDREN
. DANGERlPELIGRO
SI usted no enliende la etiqueta. busque a alguie~ para que se la exPJique a usted en detalle. (If you do not understand the tabel. find
someone to explain it to you In detail.)
FIRST AID
IF IN EYES: Hold eyes open and rinse s10wty and genUy with water for 15"20 minutes. Remove contact lenses. if present. after the first
5 minutes. then continue rinsing. CaD a polson control center or physlcian'for treatment advice.
IF INHALED: Move perSon to fresh air. If the person Is not breathing. call 911 or ambulance. then Qive artificial respiration. Wflflbly
mouth-to-mouth. if possible. Call a poison control center or physician for treatment advice. • •• ~ ••
IF SWALLOWED: Call a poison control center;" <1octdr Ifnmediately for treatment advice. Have person Sip a glass of Water ICcMflto
swallow. Do not Induce vomiting unless told to by,a j)Oisan control center or doctor. 'Do not give anything by mouth to an u/tc!:lflScious
person. . ': •• :.:.
• 1. • • ••••
Have the product container or label with you when calling a polson control center or doctor. or going for treatrw~. • • • •••• •
. .-(
NOTE TO PHYSICIAN: Probable mucosal damage may contraindicate the use of gastric lavage.
PRECAUTIONARY STATEMENTS
DANGER
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
• • ••
• • ..... '
• • • •••••
• •••• • • ••••
•• • Corrosive. Causes Irreversible eye damage. May be fatal If Inhaled. ' Do not 'get In eyes. or on clothing. Do not breDth3 Ai!t.
Prolonged or frequently repeated skin contact may cause allergic reaction in some IndMduals.
Personal Protective Equipment (PPE):
Some materials that are chemical resistant to this product are made of barrier laminate, butyl rubber or viton. .If you want more options,
follow instructions for category A on the EPA chemical resistant categOry selection chart. . . .
Mixers. loaders. appUcators and other handlers rriust wear: long-sleeved shirt and long pants. shoes plus socks. goggles or face shield.
chemical resistant gloves made of any waterproOf material and a respirator with either an organic-vapor removing cartridge with a
prefilter approved for pesticides (MSHAINIOSH approval number prefix TC-23C). or a canister approved for pesticides (MSHAINIOSH
approval number prefix TC-14G). ora NIOSH approved respirator with an 'organlc vapor (OV) cartridge or canister with any N. R, p. or ' HE prefilter.' ' ' . , ' .
Discard clothing and other absorbent materials IIlat have been drenched or heavily contaminated Ylith tl'!is product's·concentrate. Do not
reuse them. Follow manufacturer's Instructions for deanlng/maintalnlng PPE. If no sUch Instructions for washables, 'use detergent and
hot water. Keep and wash PPE separately from other laundry. ' '
When handlers use dosed systems, enciosed cab!l. or aircraft in a manner that meets the requirements listed in the Worker Protection
Standard (WPS) for agricultural pesticides [40 CF 170.240 (d) (4-6)), the handler peE requirements maybe reduced or modified as
specified In the WPS. Water-soluble bags when usedcorrectiy qualify as a dosed loading system under the WPS. Handlers handling'
this product while it is endosed In intact water-soluble bags are perml!led to wear long-sleeved shirt, long pants. shoes plus socks, and
chemical-resistant gloves, provided the other required PPE is Immediately available in case the bag is opened.
Read Additional PRECAUTIONARY STATEMENTS.
EPA Reg. No. 9779-328
Distributed By:
Agriliance, LLC
P. O. Box 64089, Sl Paul. MN 55164-0089
EPAEsl No.
'"
NET CONTENTS: 10 LBS.
.- (as 4 packets of 2% Ibs. each for agricultural uses)
(as B packets of 1 % Ibs. each for turf & ornamental)
Per RED & EPA letter 3-11-02
<I
" ....
.. Page 2 of 16 USER SAFETY RECOMMENDATIONS Users should wash hands before eating, drinking, chewing gum, using tobacco or using the toilet Users should remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing. Users should remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. ENVIRONMENTAL HAZARDS This product is toxic to aquatic invertebrates, and wildlife. Do not apply directly to water, to areas where surface water Is present or to intertidal areas below the mean high water marK. Drift and runoff may be hazardous to aquatic organisms in neighboring areas. Do not contaminate water when disposing of equipment washwaters or rinsate. This chemical is known to leach through soli into groundwater under certain conditions as a result of label use. Use of the chemical in areas where soils are p~rmeable, particularly where the water table is shallow, may result in groundwater contamination. The chemical can contaminate surface water through spray drift Under some conditions, it may also have a high potential for runoff into surface water for several days to weeks after application. These include poorly draining or wet soils with readily visible slopes toward adjacent surface waters, frequently flooded areas, areas overlaying eX1temely shallow ground water, areas with infield canals or ditches that drain to surface water, areas not separated from adjacent surface waters with vegetated filter strips, and areas over-laying tile drainage systems that drain to surface water. DIRECTIONS FOR USE It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation. AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labeling and with the WorKer Protection Standard, 40 CFR part 170. This Standard contains requirements for the protection of agricultural worKers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, noUficatlon, and emergency aSSistance. II also contains specific Instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE), notification to worKers, and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the WorKer Protection Standard. Do not enter or allow worKer entry into treated areas during the restricted entry interval (REI) of 12 hours. PPE required for early entry to treated areas that is permitted under the WorKer Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is: coveralls, chemical resistant gloves such as or made of any waterproof material, shoes plus socks and protective eyewear. Special Eye IrritaUon Provisions: This product is a severe eye irritant. Although the restrfcted-entry interval expires after 12 hours, for the next 6 ~ days entry is permitted only when the following safety measures are provided:
- At least one container designed specifically for flushing eyes must be available in operating condition at the WPS-Required decontamination site intended for workers entering the treated area. WorKers must be informed, in a manner they can understand: • that residues in the treated area may be highly irritating to their eyes, • that If they do get residues In their eyes, they should immediately flush their eyes using the eyeflush container that Is located at the decontamination site or using other readily available clean water, and. how to operate the eyeflush container. NON~AGRICUL TURAL USE REQUIREMENTS The requirements in this box apply to uses of this product that are NOT within the scope of the WorKer Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce agricultural plants on farms, forests, nurseries, or greenhouses. Do not enter or allow others to enter the treated area until sprays have dried. STORAGE AND DISPOSAL DO NOT CONTAMINATE WATER, FOOD, OR FEED BY STORAGE OR DISPOSAL PESTICIDE STORAGE: Store In a dry location away from children, animals, foods, feeds, seeds, or other agricultural chemicals. In the event of spillage, scrape up and dispose of in accordance with information given under DISPOSAL. Repackage and relabel useable product in a sound container. In case of fire or other emergency, report at once by toll-free telephone to 800-424-9300. PESTICIDE DISPOSAL: Pesticide wastes are toxic. Improper disposal of excess pesticide, pesticide spray, or rinsate is a violation of Federal law. If these wastes cannot be disposed of by use according to label instructions, contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste representative at !he nearest EPA Regional Office for guidance. CONTAINER DISPOSAL: Completely emply bag into application equipment. Then dispose of empty bag in a sanitary landfill or by incineration, or, if allowed by state and local authorities, by burning. If bumed, stay out of smoke .
," .. ....
l"l'
-.j~; ..
'1-
',,:;:
.' ,
L
-.
3
Page 3 of 16
GENERAL PRECAUTIONS AND RESTRICTIONS
This product must not be applied with 150 feet (for aerial and air-blast applications) or 25 feet (for ground application) of
marine/estuarine water bodies unless that there is an untreated buffer area of the width belween the area to be treated and the
water body. .
SPRAY DRIFT ADVISORY
Avoiding spray drift at the application site is the responsibility of the applicator. _ The interaction of many equipment-and-weather
related factors determine the potential for spray drift The applicator and the grower are responsible for considering all these
factors when making decisions. The following drift management requirements ml,lst be followed to avoid off-target drift movement
from aerial applications to agricultural field crops. These requirements do not apply to forestry applications, public health uses or to
applications using dry formulations. -
- The distance of the outer most nozzles on the boom must not exceed % the length of the wingspan or rotor.
- Nozzles must always point backwards parallel with the air stream and never be pointed downWards more'than 45 degrees. Where states have more stringent regulations, they should be observed. The applicator should be familiar with and take into account the information covered in the Aerial Prift Reduction Advisort InfonDalion. AERIAL DRIFT REDUCTION ADVISORY INFORMATION Infonnatlon on Droplet Size The most effective way to reduce drift potential Is to apply large droplets. The best drift management strategy is to apply the largest droplets that provide sufficient coverage and control. Applying larger droplets reduces drift potential, but will not prevent drift if applications are made improperly, or under unfavorable environmental condiUons(see Wind, Temperature and Humidity, and Temperature Inversions ). Controlling Droplet Size • Volume - Use high flow rate nozzles to apply the. highest practical spray volume. Nozzles with higher rated flows produce larger droplets. • Pressure - Do not exceed the nozzle manufacturer's recommended pressures. For many nozzle types lower pressure produces larger droplets. When higher flow rates are needed, use higher flow rate no~les Instead ofinereasing pressure. • Number of nozzles - Use the minimum number of nozzles that provide uniform coverage. • Nozzle Orientation - Orienting nozzles so that the spray is released parallel to the airstream produces larger droplets than other,orlentatlons and is the recommended practice. Significant deflection from horizontal will reduce drOplet size and increase drift potential. • Nozzle Type - Use a nozzle type that Is designed for the intended application. With most nozzle types, narrower spray angles produce larger droplets. Consider using low-drift nozzles. Solid stream nozzles oriented straight back produce the largest droplets and the lowest drift. Boom Length For some use patterns, reducing the effective boom length to less than 3/4 of the wingspan or rotor length may further reduce drift without reducing swath width. Application Height applications should not be made at a height greater than 10 feet above the top of the largest plants unless a greater height Is required for aircraft safety. Making applications at the lowest height thalls safe reduces exposure of droplets to evaporation and wind. Swath Adjustment When applications are made with a crosswind, the swath will be displaced downward. Therefore, on the up and downwind edges of the field, the applicator must compensate for this displacement by adjusting the path of the aircraft upwind. Swath adjustment distance should increase, with increasing drift potential (higher wind, smaller drops, etc.). A D' MAY I 6 2002 :c- (b
Page 4 of 16 Wind Drift potential is lowest between wind speeds of 2-10 mph. However, many factors, including droplet size and equipment type determine drift potential at any given speed. Application should be avoided below 2 mph due to variable wind direction and high inversion potential. NOTE: Local terrain can influence wind patterns. Every applicator should be familiar with local wind patterns and how they affect spray drift. Temperature and Humidity When making applications in low relative humidity, set up equipment to produce larger droplets to compensate for evaporation. Droplet evaporation is most severe when conditions are both hot and dry. Temperature Inversions Applications should not occur during a temperature inversion because drift potential is high. Temperature inversions restrict vertical air mixing, which causes small suspended droplets to remain in a concentrated cloud. This cloud can move in unpredictable directions due to the light variable winds common during inversions. Temperature inversions are characterized by Increasing temperatures with altitude and are common on nights with limited cloud cover and light to no wind. They begin to form as the sun sets and often continue into the moming. Their presence can be indicated by ground fog; however, if fog is not present, inversions can also be identified by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing. Sensitive Areas The pesticide should only be applied when the potential for drift to adjacent sensitive areas (e.g. residential areas, bodies of water, known habitat for threatened or endangered species, non-target crops) is minimal (e.g. when wind is blowing away from the sensitive areas). GENERAL INFORMATION TERRANIL 900F WSP Is an excellent fungicide when used according to label directions for control of a broad spectrum of plant diseases. TERRANIL 90DF WSP can be used effectively in dilute or concentrate sprays. Thorough, uniform coverage is essential for disease control. Do not combine TERRANIL 90DF WSP in the spray tank with pesticides, surfactants or fertilizers, unless prior use has shown the combination physically compatible, effective and non injurious under conditions of use. Under conditions favoring disease development, the high rate specified and shortest application Interval should be used. Applications should be made in sufficient water to obtain adequate coverage of foliage. Gallonage to be used will vary with crop and amount of plant growth. Spray volume usually will range from 20 to 150 gallons per acre for dilute sprays and 5 to 10 gallons per acre for concentrate ground sprays and aircraft applications. Both ground and aircraft methods of application are recommended unless specific directions for ground application only are given for a crop. Application through sprinkler irrigation systems is recommended for some crops which are specified on the label below. Follow application and calibration instructions. APPLICATION AND CALIBRATION TECHNIQUES FOR SPRINKLER IRRIGATION Apply this product only through the following types of irrigation systems. Do not apply this product through any other type of irrigation system. Crop injury, lack of effectiveness, or illegal pesticide residues in the crop can result from nonuniform distribution of treated water. If you have questions about calibration, you should contact State Experiment Station specialists, equipment manufacturers, or other experts. Do not connect an irrigation system (Including greenhouse systems) used for pesticide application to a public water system unless the pesticide label-prescribed safety devices for public water systems are in place. A person knowledgeable of the chemigation system and responsible for Its operation, or under the supervision of the responsible person, shall shut the system down and make necessary adjustments should the need arise. A. Center Pivot, Traveler, Big Gun, Motorized Lateral Move, End Tow, and Side (Wheel) Roll Irrigation Equipment: Operate system and injection equipment at normal pressures recommended by the manufacturer of injection equipment used. Fill tank of injection equipment with water. Operate system for one complete circle for center pivot or one complete run for the other recommended equipment, measuring time required, amount of water injected, and acreage contained in circle or run. Mix recommended amount of TERRANIL gOOF WSP for acreage to be covered into same amount of water used during calibration and inject into system continuously for one revolution or run, but continue to operate irrigation system until TERRANIL 900F WSP has been cleared from last sprinkler head. Spray mixture in the chemical supply tank must be agitated at all times, otherwise settling and uneven application may occur. B. Solid Set and Hand Move Irrigation Equipment: Determine acreage covered by sprinkler. Fill tank of injection equipment with water and adjust flow to use contents over a thirty to forty-five minute period. Mix desired amount of Terranil 90DF WSP for acreage to be covered Into quantity of water used during calibration and operate entire system at normal pressures recommended by the manufacturer of injection equipment used for amount of time established during calibration. Provide constant mechanical agitation in the mix tank to insure that TERRANiL gOOF WSP will remain in suspension during the injection cycle. TERRANIL gOOF WSP can be injected at the beginning or end of the irrigation cycle or as a separate application. Stop injection equipment after treatment is completed and continue to operate irrigation system until Terranil gOOF WSP is cleared from last sprinkler head. SAFETY DEVICES (1) The systems designated above must contain a functional check valve, vacuum relief valve, and low pressure drain appropriately located on the irrigation pipeline to prevent water source contamination from backflow. (2) All Pesticide injection pipelines must contain a functionat, automatic, qulck-closing check valve to prevent the flow of fluid back toward the Injection pump. (3) The pesticide injection pipeline must also contain a functional, normally closed, solenoid-operated valve located on the intake side of the injection pump and connected to the system interlock to prevent fluid from being withdrawn from the supply tank when the irrigation system is either automatically or manually shut down. (4) The system must contain functional interlocking controls to automatically shut off the pesticide injection pump when the water pump motor stops. (5) The irrigation line or water pump must include a functional pressure switch which rb
Page 5 of 16 will stop the water pump motor when the water pressure decreases to the point where pesticide distribution is adversely affected. (6) Systems must use a metering pump, such as a positive displacement injection pump (e.g., diaphragm pump) effectively designed and constructed of materials that are compatible with pesticides and capable of being fitted with a system interlock. (7) Do not apply when wind speed favors drift beyond the area intended for treatment. SYSTEMS CONNECTED TO PUBLIC WATER SOURCES Public water system means a system for the provision to the public of piped water for human consumption if such system has at least 15 service connections or regularly serves an average of at least 25 individuals dally at least 60 days out of the year. CIlemigation systems connected to public water systems must contain a functional, reduced-pressure zone, backflow preventer (RPZ) or the functional equivalent in the water supply line upstream from the point of pesticide introduction. As an option 10 the RPZ, the water from the public water system should be discharged Into a reservoir tank prior to pesticide introduction. There shall be a complete physical break (air gap) between the outiet end of the fill pipe and the top or overflow rim of the reservoir tank of at least twice the inside diameter of fill pipe. The system must contain functional interlocking controls to automatically shut off the pesticide injection pump when the water pump motor stops, or in cases where there is no water pump, when the water pressure decreases to the point where pesticide distribution is adversely affected. For additional instructions on safety precautions, refer to statements (2), (3), (4), (6), and (7) in the section on SAFETY DEVICES. POSTING INSTRUCTIONS Posting of areas to be chemlgated is required when any part of a treated area is within 300 feet of sensitive areas such as residential areas, labor camps, businesses, day care centers, hospitals, Inilatient clinics, nursing homes, or any public areas such as schools, parks, playgrounds, or other public facilities not including public roads, or when chemigated area is open to the public, such as golf courses or retail greenhouses. This sign is in addition to any sign posted to comply with Worker Protection Standard. Posting must conform to the following requirements. Treated areas shall be posted with signs at all usual points of entry and along likely routes of approach from the listed sensitive areas. When there are no usual points of entry, signs must be posted in the comers of the treated areas and in any other location affording maximum visibility to sensitive areas. The printed side of the sign should face away from the treated area towards the sensitive area. The signs shall be printed in English. Signs must be posted prior to application and must remain posted until foliage has dried and soil surface water has disappeared. Signs may remain in place indefinitely as long as they are composed of material to prevent deterioration and maintain legibility for the duration of the posting period. All words shall consist of letters at least 2~ inches tall, and all letters and the symbol shall be a coior which sharply contrasts with their immediate background. At the top of the sign shall be the words KEEP OUT, followed by an octagonal stop sign symbol at least 8 inches in diameter containing the word STOP. Below the symbol shall be the words PESTICIDES IN IRRIGATION WATER.
/; t I b Page 6 of 16 MIXING PROCEDURES: Be sure sprayer is dean and not contaminated with any other materials. or crop Injury or sprayer dogging may result Fill tank y., full with dean water; start agitation. Be certain that the agitation system is working properly and creates a rippling or rolling aelion on the liquid surface. With the agitator running. drop the required number of unopened soluble packs into the tank. Continue filling tank with the remainder of the water. Increase agitation if necessary to maintain surface action. Finish filling tank. Maintain agitation during operation. Clean sprayer thoroughly immediately after use by flushing system with water containing a detergent Do not use on greenhouse grown crops. CROP Beans (Snap) Beans (Dry) Navy. Pinto. Kidney, Lima. Blackeye Cabbage. Cauliflower. Brocco/i. Brussels sprouts, Chinese BrOCCOli. Chinese Cabbage (tight-headed varieties only) Carrot Celery DISEASES Rust Botrytls blight (gray mold) Rust. Anthracnose. Downy mildew. Cercospora leaf spot (blackeye only) Altemaria leaf spot. Downy mildew Ring spot (california only) Cercospora (early) blight, Alternaria (late) blight Cercospora (early) blight. Septoria (late) blight Basal stalk rot (Rhlzoctonla solani) Early blight Late blight AREA COVEREDI 2.5 LB. PACKET 1.125 - 2 acres 1.25 acre 1.75 - 2.2 acres 1.8 acres 1.5 acres RATE/ACRE 1.125-2Ibs. 21bs. 1.125 -1.3Ibs. 1.25Ibs. 1.5Ibs. APPLICATION DIRECTIONS Use in sufficient water to obtain adequate coverage. Begin applications during early bloom stage or when disease first threatens and repeat at weekly intervals as necessary to maintain control. Do not apply within 7 days of harvest. Do not graze treated areas or feed treated plant parts to livestock. Do not exceed maximum rate per acre In a single application. or g Ibs.a.i.lacre/season. Minimum retreatment interval is 7 days. Use In sufficient water to obtain adequate coverage. Begin applications during early bloom stage and repeat at 7 to 10 day Intervals. For use only on beans harvested dry with pods removed. 00 not apply within 6 weeks before harvest. Do not allow livestock to graze in treated areas or feed treated plant parts to livestock. Do not exceed maximum rate per acre In a single application. or 6 Ibs.a.i.lacre/season. Minimum retreatment interval is 7 days. Use in sufficient water to obtain adequate coverage. Begin applications after transplants are set In field, or shortly after emergence of field-seeded crop, or when conditions favor disease development. Repeat at 7 to 10 day Intervals. Do not exceed maximum rate per acre in a single application. or 12 Ibs.a.l.lacre/season. Minimum retreatment interval is 7 days. For field seeded Brussels sprouts. begin applications at time of early sprout development or when conditions favor disease development. Repeat at 7 to 10 day intervals. 1.5 -1.75 acres 1.25 - 1.3 Ibs. Use In sufficient water to obtain adequate coverage. Start applications when disease threatens and repeat at 7 to 10 day intervals. Terranll 90DF WSP may be applied through sprinkler irrigation equipment. See calibration directions preceding this section. Do not exceed maximum rate per acre In a single application, or 12Ibs.a.i.lacre/season. Minimum retreatment interval is 7 days. 1.8 - 2.5 acres 0.875 - 1.25Ibs. Use 1.8 - 2.5 pounds per acre on a 7 day schedule. 1.125 - 1.25 acres 1 packetJ200 gals. to 2 packetsl330 gals. 1.75 - 2lbs. 1.25 -1.5 Ibs.l100 gals. Start applications when transplants are set in the field. Apply in sufficient water to obtain adequate coverage. Do not apply within 7 days of harvest. TERRANIL gOOF WSP may be applied through sprinkler irrigation equipment as directed above. Do not exceed maximum rate per acre in a single application. or 18 Ibs.a.i.lacrelseason. Minimum retreatment interval is 7 days. For celery seedbeds. apply In 125 gallons per every 7 days to maintain control. Start applications shortly after crop emergence. Use the higher rate under severe disease conditions.
CROP Corn (Sweet). Corn grown for seed Cranberries Cucurbits: Cucumber. Cantaloupe. Muskmelon. Honeydew melon. Watermelon. Squash. Pumpkin DISEASES Helmlnthosporium leaf blights. Rust Fruit rots. Lophodermium leaf/twig blight Target spot, Anthracnose. Downy mildew Cucumber belly rot (Rhizoctonia solan!) Cercospora leaf spot. gummy stem bUght (black rot). Alternaria leaf blight. Scab. Powdery mildew (Spaerotheca only) AREA COVEREDI 2.5 LB. PACKET 1.75 - 3.6 acres 0.5 - 0.65 acre 1.5 -1.8 acres 1.125 acre 1.25 -1.5 acres For'" ..... Phil.. do not elceed rate per acre in a single Grasses grown for seed Stem rust. Leaf rust. Stripe rust, Septoria leaf spot, Glume blotch, Bipolaris and Orechslera leaf spots and Selenophoma (eyespot) 1.75-2.55 acres RATE/ACRE 0.625 - 1.3 Ibs. 3.5 - 4.5 Ibs. 1.25 - 1.5Ibs. 2lbs. 1.5 - 2lbs. , or 15.75Ibs.a.i 0.875 - 1.3 Ibs. 7 Page 7 of 16 APPLICATION DIRECTIONS Use in sufficient water to obtain adequate coverage. Begin applications when conditions favor disease development and repeat at 7 day intervals to maintain control. Under severe disease conditions. use 1.3 pounds per acre. Do not apply within 14 days of harvest. Do not apply to sweet com to be processed. Do not allow livestock to graze in· treated fields. Do not ensile treated corn or use as livestock forage. Do not exceed maximum rate per acre in a single application. or 9 Ibs.a.i.lacre/season. Minimum retreatment interval is 7 days. Apply at late bloom and repeat at 10 to 14 day intervals. Under severe conditions, use the 4.5 pounds per acre rate on a 10 day schedule. Do not apply more than 3 times per season, or within 50 days before harvest. Do not apply to bogs when flooded or allow release of irrigation water from bogs for at least 3 days following application. TERRANIL 900F WSP may be applied through sprinkler irrigation equipment. Use 300 gallons of water per acre through solid set systems only. See calibration directions preceding this section. Do not exceed maximum rate per acre in a single application. or 15 Ibs.a.i.lacre/season. Minimum retreatmenl interval is 10 days. Use in sufficient water to obtain adequate coverage. Begin applications when plants are in first leaf stage or when conditions are favorable for disease development. Repeat applications at 7 day intervals. TERRANIL 900F WSP may be applied through sprinkler irrigation equipment as directed above. Use TERRANIL 900F WSP in sufficient water to obtain runoff to soli surface. Make a Single application when vines begin to form. TERRANIL 900F WSP may be applied through sprinkler irrigation equipment as directed above. Use in sufficient water to obtain adequate coverage. Begin applications when plants are in first true leaf stage or when conditions are favorable for disease development. Repeat applications at 7 day intervals. TERRANIL gOOF WSP may be applied through sprinkler irrigation eqUipment. See calibration directions preceding this section. PRECAIlTION:' Certain varieties of melons may be sensitive to sunburn following appUcations of chlorothalonil during periods of high solar i';t;'n";t,, Minimum retreatment interyalis 7 days. Use in sufficient water to obtain adequate coverage. Begin applications during stem elongation when conditions favor disease development. Reapply at flag (top) leaf emergence and at head emergence. Under severe disease conditions, use the 1.2 pound per acre rate and repeat applications at 14 day intervals. Do not apply within 14 days of harvest. Do not allow livestock to graze in treated areas or feed treated plant parts to livestock. Do not exceed maximum rate. per acre _ in a single application. or 4.5 Ibs.a.i.lacre/season. Minimum retreatment interval is 14 days.
CROP Mint Onion (dry bulb) garlic Onion (green bunching), Leek, Shallot, Onion grown for seed Papaya Parsnip Passion Fruit (Hawaii only) DISEASES Rust, Septoria leaf spot Botrytis leaf blight (blast). Purple blotch, Botrytis neck rot (suppression only) Botrytis leaf blight (blast), Purple blotch, Downy mildew (Suppression only) Altemaria fruit spot, Anthracnose, stem end rot Altemaria leaf spot, Downy mildew, . Anthracnose, Botrytis blight (gray mold), Bottom rot (Rhizoctonia) Altemaria fruit and leaf spot (passion fruit brown spot) AREA COVEREDI 2.5 LB. PACKET 2.5 acres 1.28 - 2.55 acres 1.125 - 2 acres 1.125 - 1.28 acres 1.75 - 2 acres 1.75 acres RATE/ACRE 0.9Ibs. 0.875 - 1.75Ibs. 1.125 - 2lbs. 1.75 - 21bs. 1.125 - 1.3 Ibs. 1.3Ibs. Page 8 of 16 APPLICATION DIRECTIONS Use in sufficient water to obtain adequate coverage, normally 20 to 150 gallons per acre for dilute sprays and 5 to 10 gallons. per acre for concentrate ground and air craft applications. Begin applications when emerging plants are 4-8 inches high. Repeat applications at 7 to 10 day intervals. Do not apply more than 3 times per season. Do not apply within 80 days of harvest. Do not feed fresh or extracted mint hay from treated fields to livestock. Based on available residue data. use of TERRANIL gOOF WSP on mint is restricted to Indiana. Michigan and Wisconsin. Do not exceed maximum rate per acre in a single application, or 3 Ibs.a.l.lacre/season. Minimum retreatment interval is 7 days. Apply in sufficient water to obtain adequate coverage. Make the first application at first sign of disease or when dew or rain occurs. Repeat at 7 to 10 day intervais for as long as conditions favor disease. Use the high rate and a 7 day schedule of applications when heavy dew or rain persists .. Do not appiy within 7 days before harvest. If additional disease control is needed before harvest, use another registered fungicide. Do not exceed maximum rate per acre in a singie application, or 15 Ibs.a.i.lacre/season. Minimum retreatmerit interval is 7 days. Apply in sufficient water to obtain adequate coverage. Make the first application at first sign of disease or when dew or rain occurs. Repeat at 7 to 10 day intervals for as long as conditions favor disease. Use the high rate and a 7 day schedule of applications when heavy dew or rain persiSts. Do not apply more than 3 times per season or within 14 days of harvest on green bunching onions, leeks, or Shallots. if additional disease control is needed before harvest, use another registered fungicide. Do not exceed maximum rate per acre in a single application, or 6.7 Ibs.a.i.lacre/season. Minimum relrealrnent interval Is 7 days. Apply with ground equipment only, in sufficient water to obtain adequate coverage of fruit and leaves. Begin treatments when conditions favor development of disease and continue treatments at 14 day intervals until weather conditions no longer favor disease development. Do not graze livestock in treated area or feed processing by-products to livestock. Do not exceed maximum rate per acre in a single application, or 6.75 Ibs.a.l.lacrefseason. Minimum retreatment interval is 14 days. Apply in sufficient water to obtain adequate coverage. Make the first application at the first sign of disease or when conditions 'are favorable for infection. Continue applications on a. 7 to 10 day schedule. Do not apply more than 4 times per season or within 10 days of harvest. Do not feed treated plant parts to livestock. Do not exceed maximum rate per acre in a single application, or 6 Ibs.aJ.lacrefseason. Minimum retrealrnent interval is 7 days. Apply with ground equipment in sufficient water to obtain adequate coverage of fruit and leaves. Begin treatment when fruit spots appear (April 10 July) and continue treatments at 14 day intervals until weather conditions no longer favor disease development. Do not graze in treated areaOf' feed vines or· processing by-product.to livestock used for fOod. Do not exceed maximum rate per acre In a single application, or 7.5 Ibs a.i.lacrel season. Minimum retreatment interval is 14 days.
CROP Peanut Soybean Determinate (Southem) Varieties DISEASES Cercospora (early) Leaf spot, Cercosporidium (late) leaf spot, Rust, Web blotch AREA COVEREDI 2,SlB, PACKET 2.25 acres RATE/ACRE 1 lb. q t {b Page 9 of 16 APPLICATION DIRECTIONS Apply in sufficient water for coverage when leaf wetness first occurs or 30 to 40 days after planting. Repeat at 14 day intervals. When conditions favor late leaf spot or when rust or web blotch occur, apply 1 pounds per acre (1 packet per 2.25 acres) at 10 day intervals for the remainder of the season. Do not apply within 14 days of harvest. Do not allow livestock to graze in treated areas. 00 not feed hay or threshings from treated fields to live stock. Terranil SOOF WSP may be applied through sprinkler irrigation equipment. See calibration directions preceding this section. 00 not exceed maximum rate per acre in a single application, or 9 Ibs.a.i.lacre/season. Minimum interval Is 14 days. When Sclerotium stem rot (white mold) and Rhizoctonia limb rot are present, use TERRANIL 900F WSP in a spray program with Folicui D 3.6F to discourage development of resistant strains of fungi. The first two (2) applications (at 14 day intervals) should be made with TERRANIL 900F WSP at 1 packet per every 2,25 acres of area treated. Applications 3, 4, 5, and 6 (at 14-day intervals) should be FoUcur 3.6F and the last application with TERRANIL gOOF WSP again. To further discourage development of resistant strains of fungi-for applications 3, 4, 5 and 6, tank mix 1 lb. per acre 01 TERRANIL 900F WSP with Follcur 3.6F at the recommended rate. See the Folicur 3.6F label for specific use directions and rates. Folicur® is a trademark of Bayer Co. . TERRANIL 900F WSP Plus nlte Tank Mix: TERRANIL 900F WSP may be used In combination with Tilltor early and late leaf spot control. Apply 1 packed TERRANIL 90DF WSP as a tank mixture with 5.6 fl. oz. of Tilt in a minimum of 20 gallons of water per every 2.8 acres with ground equipment, or a minimum of 5 gallons of water per acre by aerial application. Begin applications 3~0 days after planting, or at first appearance of disease, and continue applications on a 14 day schedule. TERRANIL OODF WSP plus Till also may be used in State Agricultural Extension advisory (disease forecasting) programs which recommend application timing based on environmental factors favorable for disease development. Consult the Tilt label for specific use directions and restrictions. Note: Read and carefully observe the label directions, cautionary statements and all information on each product used in this tank mixture. Additional precautionary statements are made on these labels, use according to the most restrictive label directions for each product in the mixture. Tilt® Is a trademark of Ciba-Geigy Corporation. Early blight, Late blight, Botrytis vine rot Anthracnose, Diaporthe pod and Stem blight, Frogeye leaf spot (Cercospora sojlna), Purple seed stain, Cercospora leaf blight (Ceroospora kikuchii), Septaria brown spot 3.6 acres then 2.25-2.55 acres 0.625Ibs. then 0.875 - 1 Ibs. Apply as a banded treatment directed over the foliage, beginning when vines are first exposed and leal wetness occurs. Repeat applications at 7 to 10 day intervals until vines close between rows, then increase rate and water carrier volume to cover the denser canopy and begin broadcast application. Continue applications at 7 to 10 day intervals. Under severe disease conditions, use 1 pound per acre on a 5 day schedule. Terranil gOOF WSP may be applied through sprinkler Irrigation equipment. See calibration directions preceding this section. 00 not exceed a 1 D-day interval between applications when using sprinkler irrigation techniques. 00 not exceed maximum rate per acre ·in·· a· single applicaUon, ·or ·11.25 Ibs.a.i.Iacrelseason. Minimum relreatment Interval Is 5 days. Apply in sufficient water to obtain complete coverage, using at least five gallons of water per acre for aerial applicaUons. Use the three application program In areas having a history of moderate to severe disease intensity. TERRANIL. OODF WSP may be applied through sprinkler irrigation equipment. Follow calibration directions preceding this section. Note: 00 not exceed a total of 3 applications per season. or 4.5Ibs. a.l.lacre/season. Minimum retreatment Interval is 14 days. Do not apply within 6 weeks of harvest. Do not feed treated parts to livestock or allow grazing in treated fields.
CROP
Soybean
Detenninate
(Southern) Varieties
(Continued)
• Soybean
Indetenninate
(Northern) Varieties
TOI'I1ato
DISEASES
Stem canker
(Diaporthe
phaseolorum var.
caulivora)
Anthracnose,
Dlaporthe pod and
Stem blight, Frogeye
leaf spot (Cercospora
sojina), Purple seed
stain, Cercospora leaf
blight (Cercospora
kikuchii), Septoria
brown spot
FOLIAGE:
(apply every 7 to 10
days): Early blight,
Late blight, Gray leaf
spot, Gray leaf mold,
Septoria leaf spot
AREA
COVEREDI
2.5 LB.
PACKET
1.25 - 2 acres
1.67 - 2.55
aeres
2.55 aeres
1.4 - 2 acres
1.66 - 2.8 aeres
1.28 - 1.8 acres
RATE/ACRE
1.125-1.6Ibs.
1 v 1- I b
Page 10 of 16
APPLICATION DIRECTIONS
Two application program - Make the first application at
early pod set (R3 stage, when majority of pods are 1/8 to
3/8 inch in length) and the second at beginning of seed
fonnation (R5) which occurs about 14 days later.
0.875 - 1.34 Ibs. Three application program - Make the first application at
the beginning of flowering (R1), the second at early pod
set (R3) and the third at beginning of seed fonnation (R5).
0.B75Ibs.
1.125 -1.6Ibs.
0.875 - 1.5Ibs.
1.25-1.75Ibs.
Apply in 10 to 20 gallons of water per acre, as a band
treatment directing spray to provide coverage of entire
plant. Make the first application at time of emergence of
the second trifoliate leaves (V2). If conditions favor stem
canker disease, make a second and a third application.
Make all applications at 14 day intervals.
Apply in sufficient water to obtain complete coverage,
using at least five gallons of water per aere for aerial
applications. Use the three application program in areas
having a history of moderate to severe disease intensity.
TERRANIL 90DF WSP may be applied through sprinkler
irrigation equipment. Follow calibration directions
preceding this section.
Note: Do not exceed a total of 3 applications per season
or 4.5 Ibs. a.iJaere/season. Minimum retreatment interval
is 14 days. Do not apply within 6 weeks of harvest. Do
not feed treated parts to livestock or allow grazing in
treated fields.
Two application program - Make the first application
when the largest pods are 1 to 1 Yo inches in length and
make the second application 14 days later. Terranll 900F
may be co-applied with Benlate® 50WP as a tank mix for
disease control in indeterminate (Northern) soybeans.
Use 0.9 lb. of Terranil 90DF plus 8 ounces of Benlate
50WP per aere. Make the first application when pods near
the top of plants are Yo to 1 Inch in length and a second
application 14 days later.
Benlate® is a trademark of E. I. DuPont de Nemours and
Co., Inc.
Three application program - Make the first application
one week after first flowering and continue applications at
14 day intervals.
Apply in sufficient water to obtain adeQuate coverage.
Begin applications when dew or rain occur and disease
threatens. Use the highest rate and shortest interval •
specified when disease conditions are severe. TERRANIL
90DF WSP may be combined in the spray tank with EPA
registered pesticide products that claim copper as the
active ingredient and are labeled for control of bacterial
diseases of tomatoes. Check the copper manufacturer's
label for specific instructions, precautions and limitations
prior to mixing with TERRANIL 90DF WSP. Do not use
with Copper-Count® N in concentrated spray
suspensions. TERRANIL 90DF WSP may be applied
through sprinkler Irrigation. See calibration directions
preceding this section.
® Copper-Count is a '':'~"'" trademark of Mineral
& 'I..
---( I 9; (b-- Page 11 of 16 AREA CROP DISEASES COVEREDI RATE/ACRE APPLICATION DIRECTIONS 2.5 LB. PACKET Tomato (Continued) FRUIT: 1.18-1.28 1.75 -1.9Ibs. Do not exceed maximum rate per acre in a single (apply every 14 days acres application, or 15.1 Ibs. a.l.lacre/season. Minimum beginning at fruit sel): relreatment interval is 14 days. AnthraCl'lose, Altemaria fruil rot (black mold), Rhizoctonia fruit rol, Botrytis gray mold, Late blight fruit rot TREE FRUITS CROP SPRAY VOLUME (Gallons per acre) .~~~ERRANIL 900F WSP in sufficient water and with Peach, Nectarine, calibration to obtain uniform coverage of tree Apricot, Tart Cherry, 20 (concentrate) to 300 (full dilute) canopy. Application with ground equipment is preferable Plum, Prune to aerial application because ground applications generally give better coverage of the tree canopy. If application with ground equipment is not feasible, TERRANIL 900F WSP may be applied with aircraft using at least 20 gallons per acre. Do not allow livestock to graze in trealed areas. The Sweet Cherry following spray volumes are recommended as gallons of 20 (concentrate) to 400 (full dilute) spray per acre. Conifers Dilute Concentrate Forest stands Not Used 10 to 20 (aircraft) Christmas trees 100 10 to 50 (aircraft or ground equipment) Nursery beds 100 5 to 10 (ground eqUipment only) TERRANIL gOOF WSP AREA COVERED PER PACKET • DILUTION FOR CROP DISEASES ACRES ONE 2.5 LB. RATE/ACRE APPLICATION DIRECTIONS PACKET Peach, Nectarine Leaf curl, 1 acre 1 packet! 2.5Ibs. For best control of both diseases apply at Apricot, Cherry, Coryneum 220 - 280 gals. leaf fall in late autumn, using sufficient waler Plum,Prune blight (shothole) and proper sprayer calibration to obtain uniform coverage. When conditions favor high disease levels, use Ihe high rate of application and apply once or twice more in mid to late winter before budswell. If the leaf fall application is nol praclical, application. of· TERRANIL gOOF WSP .for control of leaf curt may be made at any time prior to budswell the following spring. Where Coryneum blight (shothole) occurs, also apply at bud break to protect newly emerging leaves and at shuck-split 10 prevent fruit infections. -------------------------------- ._-----,,-
ld- t ( b
Page 12 of 16
DILUTION FOR
CROP DISEASES ACRES ONE2.SLB. RATE/ACRE APPLICATION DIRECTIONS
pACKET
Peach. Nectarine Brown rot 1 acre 1 packeV 2.5Ibs. Make one application at popcorn (pink, red,
Apricot, Cherry, blossom blight, 220 - 280 gals. or early white bud) and a second application
Plum, Prune Lacy (russet) at full bloom. If weather conditions favor
(Continued) scab (plum/ disease development. make an additional
prune) application at petal fall.
Cherry leaf 1 acre 1 packeV 2.5Ibs. In addition to the bloom applications listed
spot, Peach, 220- 280 gal. above, make one application at shuck-split.
Nectarine, 00 not apply TERRANIL 900F WSP after
Apricot scab shuck-split and before harvst. If additional
disease control is needed before harvest,
use another registered fungicide. For control
of cherry leaf spot after harvest, make one
application to foliage within 7 days after fruit
is removed. In orchards with a history of
high leaf spot Incidence, make a second
application 10-14 days later.
Do not exceed maximum rate per acre in a single application, or 13.95 Ibs. aJ. /acre/season (6 - 2 Y. lb. Packets).
Minimum retreatment Interval is 10 days.
'Volumetric rates to be used only with full dilute spray volume specified on this label for tree fruits.
CONIFERS: Apply TERRANIL 90DF WSP at a rate of 1 packet per 200 gallons of water unless other directions are given in the tables below. Begin
applications as directed for each species and disease condition cited and repeat on a 21 day schedule until conditions are no longer favorable for
disease development. During periods when conditions favor severe disease incidence. generally cloudy or wet weather. use the hIgher rate specified.
Aerial application to conifers is permitted although ground applications generally give better coverage. If application with ground equipment is not
feasible, TERRANIL 900F WSP may be applied aerially to forest stands in 10-20 gallons of water and to Christmas trees in 10-50 galions of water.
CONIFERS:
DISEASES CONTROLLED AREA COVERED PER ONE APPLICATION DIRECTIONS
2.5 LB. PACKET
" needlecast 1 - 2 acres Apply at bud break and repeat at 3 to 4 week Intervals until
(Douglas fir) needles are fully elongated and conditions no longer favor
disease development. In plantations of mixed
provenance, or when irregular bud break occurs, apply
weekly until all trees have broken bud, then every 3 to 4
weeks as specified above. In nursery beds. use the high
rate on a 3 week schedule.
Swiss needlecast 0.625 - 1 acre Single application technique: In Christmas tree
plantations or forest stands, make one application in the
spring when new shoot growth is Y. to 2 inches In length.
Scleroderris Canker (pines), 1 - 2 acres Make first application in spring when new shoot growth is
Swiss Needlecast (Douglas fir) Y. to 2 inches in length. Make additional applications at 3
to 4 week Intervals until contiitions no longer favor disease
development. In nursery beds, apply the highest rate
specified on a 3 week schedule.
Sirococcus Tip Blight 0.75 - 1.28 acres
Rhizosphaera Needlecast 0.625 acre
(spruces), Scirrhia brown spot
(pines)
CONIFERS: DISEASES CONTROLLED Cyclaneusma and Lophodermium needlecasts (pines) Botrytis seedling blight, Phoma twig blight AREA COVERED PER ONE 2.5 LB. PACKET 0.625 - 1 acre 1 - 2 acres Page 13 of 16 APPLICATION DIRECTIONS Apply in early spring prior to bud break. Repeat applications at approximately 6 to 8 week intervals until spore release ceases In late faU. Apply monthly during periods of frequent rainrall, and where Lophodermium infections occur during dormancy (Pacific Northwest). During drought periods, applications may be suspended, then resumed upon next occurrence of needle wetness. Begin applications in nursery beds when seedlings are 4 inches tall and when cool, moist conditions favor disease development. Make additional applications at 21 day intervals as long as favorable disease conditions persist. ~e: For conifers do not exceed maximum rate per acre in a single application, or 14.85 Ibs.lacre/season. Minimum retreatment .,rval is 21 days (7 days for seed beds). USE DIRECTIONS TURF AND ORNAMENTALS TERRANIL OODF WSP Is fonnulated for use on golf course tees, greens and fairways, omamental turfgrass and omamental herbs, shrubs and trees. It Is highly effective for the control of a broad spectrum of turf and omamental plant diseases when it is used accon:ling to the directions on this product label. Thorough, uniform coverage of plant surfaces is essential for good disease control. Note: Use of this product on home lawns Is prohibited. USE ON SODFARMS: Sodrarm turf treated with c:tIlorothalonil prior to harvest must be mechanically cut, rolled, and harvested. GOLF COURSE FAIRWAYS AND OTHER TURFGRASSES: Do not mow or water after treatment until spray deposit on grass is thoroughly dry; TERRANIL OODF WSP should always be used in conjunction with good turf management practices. Apply In 30 to 40 gallons of water per acre. Begin applications when conditions favor disease development and repeat applications as long as these conditions persist. Under severe disease conditions, use the highest rate and shortest interval corresponding with the application schedule selected from the table below. Do not use TERRANIL gOOF WSP through sprinkler irrigation equipment on golf courses. AREA COVERED PER 20 OZ. PACKET DISEASE APPLICATION INTERVAL (square feet) Sclerotinia 7-10 days 12,100-24,200 Dollar Spot 14-21 days 6,800-12,100 Helminthosporium 7-10 days 12,100 Leafspot 14-21 days 6,800-12,100 Rhizoctonia brown patch 7-14 days 6,800-12,100 Anthracnose 7 days 7,700 Note: Minimum retreatment interval is 7 days. Maximum seasonal total for use on rairways and other turfgrasses must not exceed 26 Ibs. a.iJacrelseason (23 - 20 oz. packets). GOLF COURSE TEES AND GREENS: Apply in an adequate amount of water to provide complete coverage. This amount may vary from 2 to 10 gallons per 1,000 square feet. See below for suggested rales and timing. Note: the lower the square feet of coverage. the higher the rate. use the higher rates only on 14 day spray schedule. Under severe disease conditions, use the curative rates by using one 20 oz packet per 4,300 square feet, followed by one 20 oz packet per 6,800 square feet thereafter on a 7 day spray schedule. Only the preventative rates for Anthracnose and Dichondra: Altemaria leafspot are recommended.
lif t Ib Page 14 of 16 AREA COVERED PER 20 OZ. PACKET (Square Feet) APPLICATION DISEASE INTERVAL Preventive> Curative Anthracnose 7·14 days 4,300-8,000 - Copper spot 7·14 days 4,300-6,800 Curvularia leafs pot 7·10 days 5,700·11,400 Oollarspot 7·14 days 5,700·11,400 one packet per 4,300 Gray leafspot 7·10 days 5,700·11,400 then Helminthosporium one packet per 6,800 leafspot and on a 7 day melting out 7·10 days 5,700·11,400 schedule Large brown patch 7·10 days 5,700·11,400 Red thread 7·10 days 4,300-11,400 Stem rust of bluegrass 7·14 days 4,300-6,800 Dichondra: Altemaria leafspot (California only) 7·14 days 4,300-6,800 ..
Recommended rates for preventing disease establishment; use lower rate (or one packet for the higher square feet at the 7 day spray schedule) when disease conditions are light to moderate, higher rates (or one packet for the lower square feet at the 10 or 14 day schedule) when conditions are severe. Note: Maximum seasonal use of TERRANIL 90DF WSP on golf course greens is 73 Ibs. active ingredient per acre, or 64 20 ounce packets. For golf course tees the maximum seasonal use is 52 Ibs. active ingredient per acre, or 46 packets. Gray snow mold caused by Typhula spp.: Apply in sufficient water to obtain adequate coverage (2 to 10 gallons per 1,000 square feet). Apply 1 packet (20 oz.) of TERRANIL 90DF WSP per 4,400 square feet of turf area. Application must be made before snow cover in autumn. Use the higher rate if turf layer remains frozen prior to snow cover. If snow cover is intermittent or lacking during the winter, re-applyat 1 packet per 6,800 square feet at monthly intervals until gray snow mold conditions no longer prevail. In areas where pink snow mold (Gertachia or Fusarium patch) is likely to occur, apply at 1 packet per 4,400 square feet in combination with products containing either benomyl at 44 ounces active ingredient per acre, or iprodione at 88 ounces active ingredient per acre of turf area. Algal Scum: For prevention of algal scum on turfgrasses caused by cyanobacteria of the genus Lyngbla, apply TERRANIL 90DF WSP at the rate of 1 packet (20 oz.) per 6,800 square feet on a 7 to 14 day schedule. Under severe scum conditions, apply on a 7-day schedule. When algal scum is well established, every attempt should be made to dry out the affiicted area. Once dry, spiking or verticutting should be done to enhance turfgrass recovery In conjunction with TERRANIL gOOF WSP applications at the rate of 1 packet per 6,800 square feet on a 7 to 14 day schedule. Several appUcations of TERRANIL 90DF WSP may be necessary for turfgrass recovery. Only a preventive spray program with TERRANIL 90DF WSP will prevent recurrence of the algae when environmental conditions are favorable for algal growth. Fusarium (Gerlachia) Patch: For control of Fusarium patch only In areas where snow cover is intermittent or lacking during the winter, apply 1 packet (20 oz.) TERRANIL 900F WSP per 4,400 square feet of turf area. Begin applications in late autumn and re-apply 1 packet (20 oz.) per 6,800 square feet at 21 day intervals until conditions favorable for Fusarium patch no longer prevail. ORNAMENTALS Apply TERRANIL 90DF WSP at a rate of 1 packet per 100 gallons of water and spray on about Yo acre of ornamental plants as directed in the tables below. Begin applications as directed.for each species and disease condition cited and repeat on a-7 to 14 day· schedule until conditions are no longer favorable for disease developmenl During periods when conditions favor severe disease incidence, generally cioudy or wet weather, use the shortest indicated interval between applications. Note: For ornamentals, do not exceed maximum rate per acre In a single application or 36.4 Ibs. a.iJacreiseason (this equates to 32 packets of product). TERRANIL gOOF WSP may NOT be used in greenhouses.
Page 15 of 16 ORNAMENTALS SPECIES DISEASES CONTROLLED SUGGESTED FIRST APPLICATION BROADLEAF SHRUBS AND TREES: Ash (Fraxinus) Cercospora, Cercosporidlum, Spring bud break Cylindrosporlum leafs pots Azalea" Phytophthora die·back, New leaf emergence; Rhododendron" Ovulinla flower blight Early bloom Buckeye, Horsechestnut Leaf blotch, Anthracnose Spring bud break Cherry-Laurel Cercospora leafspot Petal fall Crabapple Scab, Cedar·apple rust, Spring bud break Sphaeropsis leafspot Dogwood Septoria leafspot, Anthracnose Early bloom, Spring bud swell Euonymus Anthracnose Spring bud break Firethorn Scab Spring bud break Flowering almond, Monilinia blossom/branch blight Early bloom Quince, Sand Cherry Hawthorn Rust, Fabraea leafs pot Pre bloom Holly Rhizoctonia web blight Warm, moist conditions Mountain Laurel Cercospora leafspot Spring bud break Oak (red group only) Taphrina blister, Dormant bud swell Actinopelte leafspot, Anthracnose Oregon-Grape (Mahonia) Rust Spring bud break Pholinia Fabrea Spring bud break (Entomosporium) leafspot Pieris (Andromeda) Phytophthora die-back New leaf emergence Poplar Marssonlna leafspot Spring bud break Privet Cercospora leafspot Prolonged wet conditions Sycamore, Planetree Anthracnose Spring bud break Viburnum Powdery mildew Mid-summer BULBS AND FLOWERING PLANTS: Carnation Alternaria leafspot/branch rot Transplant of cuttings Botrytis flower·blight Cool, moist conditions Chrysanthemum/Daisy Mycosphaerella ray blight, Transplant of cuttings Septoria leafspot Botrytis flower blight (gray mold) Prebloom Geranium Botrytis blight, rust Cool, moist conditions Gladiolus Curvularia leaf/flower spot, Early propagation Botrytis leaf/flower spot Hollyhock Rust Early seedling stage Hydrangea" (foliage only) Cercospora and Septaria leafspots, Early propagation Rust Iris Botrytls blossom blight, Cool, moist conditions Didymellina leafspot, Ink spot Lily, Crocus, Daffodil, Botrytls blight (gray mOld, fire, Prebloom Narcissus, Tulip measles), Stagonspora leaf scorch Petunia" Phytophthora blight (foliar phase) Prebloom Botrytis blight Rose Black spot, Botrytis blight Spring bud break (Use 1 packet/acre) Statice Anthracnose, Cercospora, Spring bud break Alternaria, Botrytis leaf blights Zinnia Powdery mildew First sign of disease "Discoloration of blooms has been noted on certain varieties when applications are made during flowering. ----.---- -.--_ .. -- ..
• Page 16 of 16 FOLIAGE PLANTS: Dracaena Fusarium leafspot Pre-transplant Pachysandra Volutella leaf blight Spring bud break (Use 1 packeV16,OOO sq. ft.) Leatherleaf fem Ascochyta blight. Cercospora Spring bud break leafspot. Cyllndrocladium leafspot. Rhizoctonia blight Parlor palm (Charnaedorea) Bipolarls (Helminthosporium) COOl. moist conditions leafspot Prayer plant (Maranta) Helmlnthosporium leafspot Early propagation Oyster piant (Rhoeo) Tan leafspot Early propagation Syngonlum Cephalosporium leafspot Warm. moist conditions Philodendron Phytophthora blight. Moist conditions Dactylarla leafs pot Notice of Warranty Seller warrants that the product conforms to its chemical description and is reasonably fit for the purposes stated on the label when used in accordance with directions under normal conditions of use. SELLER MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NOR IS ANY REPRESENTATIVE OF SELLER AUTHORIZED TO MAKE ANY SUCH WARRANTY OR MODIFY THESE TERMS. This warranty does not extend to the storage. handling or use of this product contrary to label instructions, or under abnormal conditions. or under conditions not reasonably foreseeable tei Seller. and Buyer assumes the risk of any such storage, handling or use. Seller shall not be responsible for incidental or consequential damages, if any. resulting from a breach of warranty. 16 i {b-