crop-chem-docs/corpus/epa_ppls/279-3151.md

COMMAND 2 ME HERBICIDE

• EPA Reg No: 279-3151
• Registrant: FMC CORPORATION
• Signal word: Caution
• Active ingredients: Clomazone (22.5%)
• Label accepted: 2026-09-26
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000279-03151-20260926.pdf

---

1 September 2ϲ, 2026 Nina Marr Product Registration Specialist FMC Corporation 2929 Walnut Street Philadelphia, PA 19104 Subject: Label Amendment – Update to the brand name: Command 2ME  Microencapsulated Herbicide, various formatting changes, simplification of the use directions for soybean Registration Review Label Amendment – Incorporating Mitigation Measures from the Registration Review Interim Decision for Clomazone Product Name: Command 2ME DŝĐƌŽĞŶĐĂƉƐƵůĂƚĞĚHerbicide EPA Registration Number: 279-3151 Application Date(s): 03/05/2026, 07ϲ08/2019 Case Number/Decision Number(s): 686846, 479523 Dear Nina Marr: The amended label referred to above, submitted in connection with registration under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), as amended, is acceptable. This approval does not affect any conditions that were previously imposed on this registration. You continue to be subject to existing conditions on your registration and any deadlines connected with them. The Agency, in accordance with FIFRA, as amended, has completed reviewing all the information submitted with your application to support the Registration Review of the above referenced product in connection with the Clomazone Interim Decision. The Agency has concluded that your submission is acceptable. A stamped copy of your labeling is enclosed for your records. This labeling supersedes all previously accepted labeling. The next label printing of this product must use this labeling unless subsequent changes have been approved. You must submit one copy of the final printed labeling before you release the product for shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may distribute or sell this product under the previously approved labeling for 12 months from the date of this letter. After 12 months, you may only distribute or sell this product if it bears this new revised labeling or subsequently approved labeling.

Page 2 of 2 EPA Reg. No. 279-3151 Case No./Decision No. 686846, 479523 “To distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3. Should you wish to add/retain a reference to the company’s website on your label, then please be aware that the website becomes labeling under FIFRA and is subject to review by the Agency. If the website is false or misleading, the product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) lists examples of statements EPA may consider false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims made on the website may not substantially differ from those claims approved through the registration process. Therefore, should the Agency find or if it is brought to our attention that a website contains false or misleading statements or claims substantially differing from the EPA approved registration, the website will be referred to the EPA’s Office of Enforcement and Compliance. Your release for shipment of the product constitutes acceptance of these conditions. If these conditions are not complied with, the registration will be subject to cancellation in accordance with FIFRA section 6. If you have any questions, please contact Andrew Watkins at 919-541-7940 or at [email protected]. Sincerely, Enclosure Kable Bo Davis; Senior Advisor Office of Pesticide Programs Registration Division; Immediate Office Kable Bo Davis

CLOMAZONE Group 13 HERBICIDE Sold by FMC Corporation 2929 Walnut St. Philadelphia, PA 19104 Net Contents: Page 1 of 17 Command® 2ME Microencapsulated Herbicide For Agricultural or Commercial Use Only NOT FOR SALE OR USE IN CALIFORNIA EPA Reg. No. 279-3151 EPA Est. 279- Active Ingredient: By Wt. Clomazone: …………………………………………….22.5% Other Ingredients: …………………………………...77.5% 100.0% Contains 2.0 pounds of active ingredient per gallon U.S. Patent No. 4,405,357 KEEP OUT OF REACH OF CHILDREN CAUTION Si usted no entiende la etiqueta, busque a algulen para que se la explique a usted en detalle. (If you DO NOT understand the label, find someone to explain it to you in detail.) FIRST AID If in eyes: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice. If swallowed: Call a poison control center or doctor immediately for treatment advice. Have person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison control center or doctor. Do not give anything by mouth to an unconscious person. If inhaled: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably by mouth-to-mouth, if possible. Call a poison control center or doctor for treatment advice. If on skin or clothing Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a poison control center or doctor for treatment advice. For Emergency Assistance Call (800) 331-3148 See other panels for additional precautionary information. PRECAUTIONARY STATEMENTS Hazards to Humans (and Domestic Animals) Caution Harmful if inhaled. Avoid breathing vapor or spray mist. Remove contaminated clothing and wash before reuse. Personal Protective Equipment: Applicators and other handlers must wear: x Long-sleeved shirt and long pants x Chemical-resistant gloves, made of Barrier Laminate or Viton x Shoes plus socks. Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product's concentrate.DO NOT reuse them. Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables, use detergent and hot water. Keep and wash PPE separately from other laundry. 09/26/2026 279-3151

Page 2 of 17

When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d) (4-6)], the h andler PPE requirements may be reduced or modified as specif ied in the WPS.

User Safety Recommendations: Users should: x Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. x Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. x Remove PPE immediately after handling this product. Wash outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing.

Environmental Hazards DO NOT apply directly to water, to areas where surface water is present, or to intertidal areas below the mean high-water mark. DO NOT apply when weather conditions favor drift from the area treated. DO NOT apply where runoff is likely to occur. DO NOT contaminate water when disposing of equipment wash waters. Apply this product only as specified on this label.

NON-TARGET ORGANISM ADVISORY STATEMENT: This product is toxic to plants and may adversely impact the forage and habitat of non-target organisms, including pollinators, in areas adjacent to the treated site. Protect the forage and habitat of non-target organisms by following label directions intended to minimize spray drift.

Physical/Chemical Hazards DO NOT use or store near heat or open flame.

PRIOR TO APPLICATIONS Off-site movement of spray drift or vapors of Command® 2ME herbicide can cause foliar whitening or yellowing of some plants. Prior to making applications, read and strictly follow all restrictions, precautions and application instructions on this label.

DIRECTIONS FOR USE It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for traini ng, decontamination, notification, and emergency a ssistance. It also contains specific instr uctions and exceptions pertaining to the statements on this label about personal protective equipment (PPE ), and restricted- entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard.

DO NOT enter or allow worker entry into treated areas during the Restricted Entry Interval (REI) of 12 hours. Exception: if the product is soil-injected or soil-incorporated, the Worker Protection Standard under certain circumstances allows workers to enter the treated area if there will be no contact with anything that has been treated. PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil or water, is: x Coveralls x Chemical-resistant gloves, made of Barrier Laminate or Viton x Shoes plus socks.

WEED RESISTANCE MANAGEMENT Command 2ME, which contains the active ingr edient clomazone, is a group 13 herbicide based on the mode of action classification system of the Weed Science Society of America.

Proactively implementing diversified weed control strategies to minimize selection for weed populations resistant to one or more herbicides is a best practice. A diversified weed management program may include the use of multiple herbicides with different sites of action and overlapping weed spectrum with or without tillage operati ons and/or other cultural practices. Rese arch has demonstrated that using the lab eled rate and directions for use is important to delay the selection for resistance.

Page 3 of 17

The continued effectiveness of this product depends on the successful implementation of a weed resistance management program. T o aid in the prevention of developing weeds resistant to this product, users should: • Scout fields before applicati on to ensure herbicides and rates will be appropriate for the weed species and weed sizes present. • Start with a clean field, using either a burndown herbicide application or tillage. • Control weeds early when they are relatively small (less than 4 inches) with a burndown herbicide. • To minimize resistance, apply full labeled rates of Command 2ME. • Scout fields after application to detect weed escapes or shifts in control of weed species. • Control weed escapes before they reproduce by seed or proliferate vegetatively. • Report any incidence of non-performance of this product against a particular weed to your FMC representative, local retailer, or county extension agent. • Contact your FMC representative, crop adviso r, or extension agent to find out if sus pected resistant weeds to this MOA have b een found in your region. If resistant biotypes of target weeds have been reported, use the application rates of this product speci fied for your local conditions. Tank mix products so that there are multiple effective sites of actions for each target weed. • If resistance is suspected, treat weed e scapes with an herbicide having a site of action other than Group 13 and/or use nonchemical methods to remove escapes, as practical, with the goal of preventing further seed production. • Suspected herbicide-resistant weeds ma y be identified by these indicators:

• Failure to control a weed species normally controlled by the herbicide at the dose ap plied, especially if control is achieved on adjacent weeds;
• A spreading patch of non-controlled plants of a particular weed species; and
• Surviving plants mixed with controlled individuals of the same species. • Additionally, users should follow as many of the following herbicide resistance management practices as is practical:
• Use a broad-spectrum soil-applied herbicide with other si tes of action as a foundation in a weed control program.
• Utilize sequential applications of herbici des with alternative sites of action.
• Rotate the use of this product with non-Group 13 herbicides.
• Avoid making more than two applications of Command 2ME an d any other Group 13 herbicides within a single growing season unless mixed with an herbicide with a different site of action with an overlapping spectrum for the difficult-to-control weeds.
• Incorporate non-chemical weed control practices, such as mech anical cultivation, crop rotation, cover crops and weed-free crop seeds, as part of an integrated weed control program.
• Use good agronomic principles that enhance crop development and crop competitiveness.
• Thoroughly clean plant residues from equipment before leaving fields suspected to contain resistant weeds.
• Manage weeds in and around fields, during and after harvest to reduce weed seed production.

PRECAUTIONS FALIURE TO OBSERVE THE GENERAL APPLICATION PRECAUTIONS SECTION OF THIS LABEL MAY RESULT IN INJURY TO SENSITIVE PLANTS. x Some species of trees, shrubs, flowers, agronomic crops, and fruits and vegetables are sensitive to Command 2ME herbicide. x Foliar contact with spray drift or vapo rs may cause whitening of sensitive plants. Symptoms are generally temporary in nature but may persist on some plants. x Plants such as the following may show symptoms of foliar whit ening or yellowing if contacted by Command 2ME herbicide.

Trees (Deciduous) Trees (Evergreen) Apple (inc, fruit & ornamental types) Fir species Ash (Green, White Mountain) Spruce species Basswood Boxelder Shrubs & Vines Catalpa Azalea Cherry (inc. fruit & ornamental types) Burningbush (Winged Euonymus) Cottonwood Grape Elm Honeysuckle Ginko Roses Hackberry Yew Mulberry Peach Agronomic Crops Pear (Inc. fruit & ornamental types) Alfalfa Pecan Oats Poplar Russian olive Vegetable and Flower Plants Tree-of Heaven Tulip tree Others Walnut trees Ferns Willow species Herbs Strawberry Raspberry Blackberry

Page 4 of 17

SPRAYER CLEANUP DO NOT drain or flush equipment on or near desirable trees or other plants, or in areas where their roots may extend or in locations where the chemical may be washed or move in to contact with their roots. DO NOT contaminate any body of water including irrigation water that may be used on other crops. Carefully follow sprayer clean-up instructions noted below to prevent spray tank residues from damaging other crops.

Sprayer equipment needs to be thoroughly rinsed to remove residues of herbicide that might injure other subsequently sprayed crops. The steps below need to be followed for the thorough rinsi ng of spray equipment following applicati ons of Command 2ME herbicide or tank m ixes of Command 2ME with other labeled products.

1. Drain any remaining spray solution from tank, pump, hoses and boom and discard in an approved manner (See Note that follows) .
2. Clean tank and fittings by:

• Thoroughly hosing down the inside walls of the spray tank with a quantity of water equal to 1/8 of the total tank capacity and operating the pump to circulate this solution through the sprayer system for 15 minutes.
• Washing down the outside surfaces of equipment.
• Removing nozzle tip and screen from end noz zle in each boom section and allowing several gallons of rinsate solution to flush completely through boom (collect rinsate while flushing).

3. Thoroughly drain remaining rinsate solution from tank, pump an d hoses. Combine with boom flushing and dispose of all rinsates from this first rinsing in an approved manner (see Note that follows).

• When switching from water dilutions to applications utilizing crop oil or liquid fertilizer as a carrier, a small volume of c rop oil or liquid fertilizer needs to be flus hed through the tank, pump, hoses, and boom prior to the next use. Dispose of crop oil or liq uid fertilizer rinsate in an approved manner (see Note for local, state and federal guidelines).

4. Remove the remaining nozzle tips, and screens and the line filter and wash in a pail of warm soapy water, thoroughly rinse a nd replace.
5. Hose down the inside walls of the spray tank a second time and circulate this solution using the same procedure as noted in #2 above.
6. If the next use of the sprayer will be for applying a preemer gent or preplant incorporated pesti cide on any crop for which C ommand 2ME is registered, rinsate from this second rinsing may be utilized by diluting with the water for the next pesticide load; HOWEVER If the next use of the sprayer will be a postemergence applied pest icide on any crop, drain rinsate solution from this second r insing. Retain rinsate solution for use only with a soil incorporated pesticide to be applied on a crop for which Command 2ME is registered. R efill tank (after draining second rinsate solution) in accordance with postemergence product label directions.

NOTE: Dispose of excess spray mixture and/or rinsate from first tank rinsing by application to cropland as described on this label. If excess spray mixture and/or rinsate from first rinsing cannot be disposed of according to label instructions, dispos e of in compliance with local, state and federal guidelines. Contact your st ate pesticide or Environmental Control Agency or the Hazardous Waste representative at the nearest EPA regional office for guidance.

GENERAL MIXING INSTRUCTIONS Care must be taken when mixing Command 2ME herbicide. Avoid mixing in areas adjacent to desirable plants (See Section headed "PRECAUTIONS") Command 2ME Alone: Mix Command 2ME with water or liquid fertilizer in the following manner: Fill the spray tank one-half to three fourths full with water or liquid fertilizer, add the pr oper amount of Command 2ME, then add the rest of the water or liquid fertilizer. Pro vide sufficient agitation during mixing and application to maintain a uniform spray mixture. Tank Mixtures: Fill spray tank one-fourth to one-third full with water; with agitator operating add th e specified amount of ingredients using the following order: dry formulations (e.g., wettable powders, dry fl owables) first, liquid suspens ions (e.g., flowables) next and finally liquids (e.g., EC's). Mix thoroughly and fill tank one-half full continuing agitation. Add Command 2ME herbicide to tank while maintaining agitation. Complete filling the sprayer tank with water. Where use of a surfactant is advised, add as the last ingredient to the spray tank. Mainta in agitation during filling, mixing and application. When using drift reducing agents, follow specific product label instructions for order of addition to spray tank. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all pr oduct labels involved in tank mixing. Use rs must follow the most restrictive direct ions for use and precautionary statements of each product in the tank mixture. If the instructions on the tank mix partner label conflict with this Command 2ME herbicide label, DO NOT use in a tank mixture with Command 2ME herbicide.

Page 5 of 17

Fertilizer Spray Mixtures: Applications of Command 2ME alone or with tank mixtures, in conjunction with fertilizer solutions may beused unless use directions specifically state otherwise. Small quantities need to be tested for co mpatibility by the following procedure be fore mixing tankful quantities.

1. Put 1 pint of fertilizer solution in a quart jar.
2. Add the appropriate amount of herbicide based on the table at the top of page 3. If more than one product is to be used, add each separately using the following sequence: dry formulations (e.g., wettable powders, dry flowables) first, liquid suspensions (e g., flowables) next and finally liquids (e.g., EC's). Herbicide Rate/Acre Amount to Be Added per Pint of Fluid Fertilizer* Wetable Powders or Dry Flowables (Dry Granules) ½ pound 1 pound 2 pounds 3 pounds ¾ level teaspoon 1 ½ level teaspoons 3 level teaspoons 4 ½ level teaspoons Emulsifiable Concentrates or Flowables 1 pint 1 quart

2 quarts 3 quarts ½ level teaspoon 1 level teaspoon

2 level teaspoons 3 level teaspoons

• Based on a spray volume of 25 gpa. For lower or higher spray volumes, adjust fluid fertilizer quantity accordingly.

3. Close jar and shake well.
4. Watch mixture for several seconds, agai n in 5 minutes and again after 30 minutes. If herbicide/fertilizer combination remain s mixed or can be remixed readily (i.e., does not permanently separate, foam, gel or become lumpy), the mixture is compatible and can be mixed in full volumes and sprayed. If the mixture is compatible, prepare spray by adding fertilizer solution to the tank first, then follow directions noted below:

• Command 2ME Alone: Dilute with 2 parts of water and add slowly to spra y tank of fertilizer with agitator running. Maintain agitation during application.
• Command 2ME plus Tank Mixtures: Dilute individual products with 2 parts of water , then add to the spray tank of fertilizer, while maintaining agitation, using the following order-slurry of dry formulations (wettable p owders, dry flowables) first, dilu ted liquid formulations (EC's, flowables) second. Continue agitation during application.

RESTRICTIONS DO NOT apply aerially or through irrigation equipment.

DO NOT apply this product through any type of irrigation system.

This product is for use only in a monitored commercial program conducted under FMC supervision.

DO NOT apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handl ers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation. DO NOT apply Command 2ME herbicide to non-field areas including fence rows, waterways, ditches, and roadsides

For Preemergent Applications: Command 2ME must be used as a pre-emergent soil applied treatment without incorporation. Application precautions must be taken as follows: DO NOT apply Command 2ME herbicide to non-field areas including fence rows, waterways, ditches, and roadsides. DO NOT apply within 300 feet of downwind crops and other desirable non-target plants. DO NOT apply within 1,200 feet of Towns and Housing Developmen ts, Commercial Fruit, Nut, or Vegetable Production ¹, Commercial Greenhouses or Nurseries. ¹ Except for vegetable crops registered for use on the Command 2ME label.

Refer to individual crop use directions for additional requirements.

MANDATORY SPRAY DRIFT: Ground Boom Applications: x User must only apply with the nozzle height recommended by the manufacturer, but no more than 4 feet above the ground or crop canopy. x Applicators are required to use a Coarse or coarser droplet size in accordance with the most current version of the American Society of Agricultural & Biological Engineers Standard 572 (ASAE S572).. x DO NOT apply when wind speeds exceed 15 miles per hour at the application site. x DO NOT apply during temperature inversions.

Page 6 of 17

SPRAY DRIFT ADVISORIES THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT. BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS.

IMPORTANCE OF DROPLET SIZE An effective way to reduce spray drift is to apply large droplets . Use the largest droplets that provide target pest control. W hile applying larger droplets will reduce spray drift, the potential for drift wi ll be greater if applications are made improperly or under u nfavorable environmental conditions.

CONTROLLING DROPLET SIZE – GROUND BOOM x Volume - Increasing the spray volume so that larger drople ts are produced will reduce spray drift. Use the highest practical s pray volume for the application. If a greater spray volume is needed, consider using a nozzle with a higher flow rate. x Pressure - Use the lowest spray pressure recommended for the no zzle to produce the target spray volume and droplet size. x Spray Nozzle - Use a spray nozzle that is designed for the int ended application. Consider using nozzles designed to reduce drift.

BOOM HEIGHT – GROUND BOOM Use the lowest boom height that is compatible with the spray nozzles that will provide uniform coverage. For ground equipment, the boom should remain level with the crop and have minimal bounce.

SHIELDED SPRAYERS Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify that the shields are not interfering with the uniform deposition of the spray on the target area.

TEMPERATURE AND HUMIDITY When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation.

TEMPERATURE INVERSIONS Drift potential is high during a temperature inversion. Temperatur e inversions are characterized by increasing temperature with altitude and are common on nights with limited cloud cover and light to no wind . The presence of an inversion can be indicated by ground fog or by the movement of smoke from a ground source or an aircraft smoke gene rator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an in version, while smoke that moves upward and ra pidly dissipates indicates good vertica l air mixing Avoid applications during temperature inversions

WIND Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND CONDITIONS. Applicators need to be familiar with local wind patterns and terrain that could affect spray drift.

RESTRICTIONS Non-target spray drift of Command 2ME herbicide must be avoided to prevent whitening of desirable plants. Drift is influenced by many factors which include wind speed, spray pressure, particle size, nozzle type, and boom height. The use of an agriculturally approved drift reducing additive is advised. Follow specific product label instructions for the order of addition of all products to the spray tank. Small quantities need be tested for compatibility before mixing tankful quantities. x A minimum spray volume of 10 gallons per acre is required with appropriate nozzle types and sizes that produce coarser sprays. x DO NOT exceed 30 psi spray pressure. x When moving spray equipment to noncontiguous sites, DO NOT allow spray solution to spray or dr ip from tanks, hoses, fittings or spray nozzles and tips.

Suggested Nozzle Types, Minimum Size and Pressure Ranges for Minimizing Drift (See “SPECIAL PRECAUTION” in the Cotton use section for further restrictions) Selection and proper use of spray equipment is critical in minimizing spray drift. The following table suggests pressures, flow rates, and nozzle sizes for drift reduction using various nozzle types.

Nozzle Pressure Range (PSI) Minimum Flow Rate Within Pressure Range (GPM) Minimum Nozzle Size Flat-fan 15-30 0.3 #4* LP-flat-fan 10-25 0.3 #3 Even flat-fan** 15-30 0.3 #4 Flood 10-25 0.3 #2.5* Whirl-chamber 5-20 0.3 #5 Raindrop 15-30 0.15 #2 Wide angle full cone 15-30 0.3 #5

• Refers to tip number such as 8004 or LF2.5. ** Used for banded application.

Page 7 of 17

ROTATIONAL CROPPING PRECAUTIONS Under some conditions, temporary whitening or yellowing of leaves may occur on appr oved rotational crops where undesirable soil residues of Command 2ME exist. Under abnormal conditions, carryover injury to rotational crops can occur. The following factors can contribute to increased ri sk of injury to rotational crops:

1. Exceeding label required rates.
2. Overapplication resulting from use of wor n nozzles, excessive overlapping of spray swaths, failing to shut off spray booms w hen turning (end row areas), or slowing or stopping sprayer.
3. Soil with pH less than or equal to 5.9.
4. Extreme dryness in the four months following application.,
5. Use of organophosphate soil insecticide followed by use of some postemergence corn herbicides.
6. Choice of rotational crop hybrid.

Additional instructions to prevent rotational crop injury may be provided in the form of service bulletins for location where r isk of injury is significantly increased due to extremely dry conditions.

Refer to Rotational Crop Guidelines and Replanting Instructions of specific crops for additional crop planting information.

SPECIAL PRECAUTION Off-site movement of spray drift or vapors of Command 2ME herbi cide can cause foliar whitening or yellowing of some plants. Prior to making applications read and strictly follow all precautions and application instructions on this label.

GENERAL APPLICATION INSTRUCTIONS Ground Applications Broadcast or Banded Applications: Apply Command 2ME alone or in tank mix combinati ons by ground equipment using a finished spray volume of 10 to 40 gallons of water per acre. NOTE: The use of an agriculturally approved drift reducing additive is advised. Use nozzles suitable for broadcast boom or banded application of herbicides. Coarse sprays are less likely to drift out of the target area than fine sprays. For Command 2ME tank mixtures with wettable powder or dry flowable formulations, nozzle screens and strainers should be no finer than 50- mesh. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.

Banded Applications-Calculate the rates and volumes required by using the following formulas:

Band width in inches Row width in inches X Broadcast Rate Per Acre = Band rate per acre

Band width in inches Row width in inches X Broadcast Volume Per Acre = Band volume per acre

Cultivation After Planting Soil treated with Command 2ME may be shallow-cultivated, rotary-hoed or hand-hoed without reducing the weed control activity of Command 2ME. Avoid deep cultivation which may bring untreated soil to the surface and result in poor weed control.

COMMERCIAL IMPREGNATION AND APPLICATION OF COMMAND 2ME ON DRY BULK FERTILIZERS Command 2ME herbicide may be impregnated on dry bulk fertilizers. When applied as directed Command 2ME/dry bulk fertilizer mixt ures provide weed control equal to that provided by the same rates of Command 2ME applied in water.

Impregnation: Apply using a minimum of 200 pounds of dry bulk fertilizer per acre and up to a maximum of 450 pounds per acre with the specified amount of Command 2ME herbicide per acre. Use a closed rotary-drum mixer or a simila r type of closed blender equipped with suitable spray equipment. The spray nozzle (s) need to be positioned to provide a uniform, fine spray pattern over the tumbling fertilizer for thorough coverage. The physical properties of fertilizers vary, particularly in liquid absorptive capacity. When absorptivity i s sufficient, simple spray impregnation of the fertilizer with Command 2ME provides a satisfactory, dry mixture. If the absorptive capacity is inade quate use of a highly absorptive powder is required to prov ide a dry, flowable mixture. Microcel E (Johns-Manvill Products Corporation) is a s uggested absorbent powder. Generally, less than 2% by weight of Microcel E is required. DO NOT impregnate Command 2ME onto straight coated ammonium nitrate or straight limestone becaus e these materials will not absorb the her bicide. Dry fertilizer blends containing mixtures of ammonium nitrate or limestone may be impregnated with Command 2ME.

The amount of Command 2ME actually required in the preparation of individual fertilizer mixtures needs to be determined careful ly for each production operation. This is necessary to ensure that the amount of pesticide actually contained in the mixture applied to the soil represents the correct rate of use. Bulk fertilizer impregnated with Command 2ME herbicide need s to be applied immediately, not stored. Al l state regulations, labeling, etc., of the mixtures are the responsibility of the seller.

Page 8 of 17

For those rates not listed in the following t able, calculate the amount of Command 2ME to be impregnated on a ton of dry bulk f ertilizer using the following formula:

2000 x PINTS of Command 2ME per acre (rate for soil texture) = PINTS of Command 2ME per ton of fertilizer Pounds dry fertilizer per acre

RATE CHART FOR IMPREGNATION OF DRY BULK FERTILIZERS WITH COMMAND 2ME HERBICIDE PINTS OF COMMAND 2ME PER TON OF FERTILIZER Fertilizer Rate (lb/A) Command 2ME Rate Per Acre 3.0 pt (0.75 lb ai) 4.0 pt (1.0 lb ai) 5.0 pt (1.25 lb ai) 200 30 40 50 250 24 32 40 300 20 26 ⅔ 33 ⅓ 350 17 23 28 400 15 20 23 450 13 ⅓ 18 22

If fertilizer materials are excessively dusty , use diesel oil or other suitable additiv e to reduce dust prior to impregnation a s dusty fertilizer will result in poor distribution during application. Crop injury and/or poor weed control may occur where the impregnated fertilizer is not uniformly applied. PRECAUTIONS FOR DRY BULK FERTILIZER IMPREGNATION AND APPLICATION WITH COMMAND 2ME x All equipment used to apply Command2ME must be thoroughly clean ed immediately following use to ensure no contamination results which could cause injury to non-labeled crops or desirable vegetation. Refer to "SPRAYER CLEANUP" section for additional details and disposal of rinsates. x Equipment used to physically transport Comma nd 2ME treated fertilizer, including boots, augers, conveyers, bins, etc. must be covered to prevent loss of fine particles and subjected to cleanup procedures previously described. x Mixing of Command 2ME herbicide and dry fertilizer must be con ducted in a blender which will ensure that airborne particles an d potential for volatilization are avoided. x Bulk containers must be tightly covered while the product is bei ng transported and applied to reduce chances of Command 2ME volatilization or product loss. Restriction: Dry Bulk Fertilizer impregnation operations using Command 2ME not be conducted within 1/4 mile of residential areas or areas where Command 2ME symptomology on desirable vegetation would not be tolerated.

COMMAND 2ME GEOGRAPHICAL AREAS For Rates, Weed Control, and Crop Rotation

• Southern area includes Missouri bootheel wh ich incorporates the following counties: Butler, Dunklin, Mississippi, New Madrid, Pemiscot, Scott, and Stoddard.

Page 9 of 17

COTTON GENERAL INFORMATION Command 2ME Herbicide may be applied, as a preemergent banded or broadcast treatment in conventional tillage or conservation ti llage systems for the control of annual grasses and broadleaf weeds in cotton.

PRECAUTIONS FOR COTTON Off-site movement of spray drift or vapors of Command® 2ME herbic ide can cause foliar whitening or yellowing of some plants. Prior to making applications read and strictly follow all precautions and application instructions on this label.

Restrictions for Cotton Applications:

Completion of proper qualification training required for sale, purchase, and use.

DO NOT apply aerially or through irrigation equipment.

Applicators must observe all buffer restrictions. DO NOT incorporate Command 2ME or use in a tank mixture with any herbicide that requires soil incorporation.

The use of an agriculturally ap proved drift reducing additive is advised. Follow specific product label instructions for the order of addition of all products to the spray tank. Small quantities need to be tested for compatibility before mixing tankful quantities.

DO NOT exceed 30 psi spray pressure.

DO NOT apply with nozzles other than flood, whirlchamber , or Raindrop® or similar tips that produce coarse sprays. Refer to nozzle table under SPRAY DRIFT PRECAUTIONS.

REQUIREMENTS FOR PLANTING TIME APPLICATIONS DO NOT apply Command 2ME Herbicide to cotton unless either disulfoton or phorate organophosphate insecticide is applied in-furrow wit h the seed at planting time at a minimum of 0.75 pound per acre of active ingredient. DO NOT reduce the application rate of the organophosphate insecticide when Command 2ME herbicide is applied as a banded treatm ent. Failure to apply either disulfoton or phorate insectic ides with Command 2ME in accordance with in-furrow label use directions c an result in crop phytotoxicity (bleaching) and/or stand reducti on. Combinations of at planting systemic granular carbamate and organophosphate insecticides in conjunction with Command 2ME may result in injury to cotton. Crop injury may occur with higher Command 2ME rates on sandy soils. Diuron must not be used at planting when Command 2ME is used as plant injury may result.

Refer to the insecticide product labels for appropriate in-furrow application directions and maximum use rates. Monitor application equipment to insure accurate and uniform placement of the insecticide. PREEMERGENT BANDED APPLICATIONS For preemergent banded treatments, refer to the directions for banded applications in the “GENERAL APPLICATION INSTRUCTIONS” section.

REPLANTING INSTRUCTIONS If the initial planting of cotton fails to produce a uniform stand, cotton may be replanted in fields treated with Command 2ME alone. DO NOT retreat fields with a second application of Command 2ME. When ta nk mixing with a labeled produc t, refer to the replant instruct ions for that product. DO NOT replant treated fields with any crop at in tervals that are inconsistent with the “ROTATIONAL CROP GUIDELINES” on the Command 2ME label. Where a tank mix is used, refer to the product's labels for any additional replant instructions.

If replanting is required, follow the directions under “REQUIREMENTS FOR PLANTING TIME APPLICATIONS” noted above.

RESTRICTIONS DO NOT apply Command within 65 days of harvest. DO NOT apply more than 5 pt/A (1.25 lb ai/A) of Command 2ME per application DO NOT apply more than 5 pt/A (1.25 lb ai/A) of Command 2ME per year. DO NOT allow livestock to graze on treated cotton forage or trash, or feed treated cotton forage or trash to livestock.

Page 10 of 17

Command 2ME Herbicide Applied Alone RATES AND WEEDS CONTROLLED1 2.0 pt/A Command 2ME2 (0.50 lb ai/A) 3.0 pt/A Command 2ME (0.75 lb ai/A) 4.0 pt/A Command 2ME (1.0 lb ai/A) 5.0 pt /A Command 2ME (1.25 lb ai/A) GRASSES GRASSES GRASSES GRASSES Suppression of some annual grasses Barnyardgrass Broadleaf Signalgrass Crabgrass

• Large
• Smooth Foxtail
• Giant
• Green Goosegrass Panicum
• Common
• Fall
• Texas Seedling Johnsongrass Field Sandbur* All grasses controlled at 3.0 pt/A (0.75 lb ai/A) plus: Cupgrass
• South-western
• Wooly Field Sanbur Bermudagras* Red Rice* Itchgrass3 All grasses controlled at 4.0 pt/A (1 lb ai/A) plus: Foxtail
• Purple
• Robust
• Yellow Junglerice* Shattercane* Wild Proso Millet*

2.0 pt/A Command 2ME2 (0.50 lb a i/A) 3.0 pt/A Command 2ME (0.75 lb ai/A) 4.0 pt/A Command 2ME (1.0 lb ai/A) 5.0 pt/A Command 2ME (1.25 lb ai/A) BROADLEAVES BROADLEAVES BROADLEAVES BROADLEAVES Velvet leaf Spurred Anoda Velvetleaf Spurred Anoda Plus: Common Ragweed* Jimsonweed* Lambsquarter Pennsylvania Smartweed Prickly Sida

Purslane Redweed Venice Mallow All broadleaves controlled at 3.0 pt/A (0.75 lb ai/A) plus: Cocklebur Common Ragweed Dayflower Florida Beggarweed Florida Pusley Jimsonweed Kochia* Redvine* Tropic Croton Wild Poinsettia4 All broadleaves controlled at 4.0 pt/A (1 lb ai/A) plus: Balloonvine* Black Nightshade* Curly Dock Joint Vetch* Kochia Morningglory

• Pitted Pennsylvania Smartweed Pigweed
• Redroot*
• Smooth Prostrate Spurge

• Partially Controlled 1 Higher label rates (a minimum of 4 pt/A, (1.0 lb ai/A)) are advised for fields that have previously been in conservation programs, or where heavy weed pressure is anticipated. Select lower to higher rates based on lighter to heavier soil types. For fields that have previously been in conservation programs, a minimum application rate of 5 pt/A (1.25 lb ai/A) for cocklebur or common ragweed control needs to be used. 2 For heavy weed pressure or heavy soils use 4 pt/A (1.0 lb. ai/A) to control Velvetleaf or Spurred Anoda. 3 For control of itchgrass, DO NOT incorporate Command 2ME. For high weed pressure and heavy soils use 5 pt/A (1.25 lb ai/A). 4 Use In AR/LA/MS/TX/OK only-for high pressure and heavy soils use 5 pt/A (1.25 lb ai/A).

COMMAND 2ME HERBICIDE MAY BE APPLIED WITH OTHER PREEMERGENT HERBICIDES REGISTERED FOR THESE USES ON COTTON. Command 2ME may be applied in combination with other herbicides registered for use in cotton to broaden the weed control spectrum. Refer to the labels of the other herbicides for additional information. Carefully observe all application precautions, rotational guidelines and replanting instructions of each product's label when using tank mixtures.

Page 11 of 17

ROTATIONAL CROP GUIDELINES Rotate to crops as listed below, otherwise crop injury may occur. Refer to sections headed “ROTATIONAL CROPPING PRECAUTIONS” and "GENERAL INFORMATION". Note: When using Command 2ME with other registered herbicides always refer to rotational restrictions and precautions on the other product's label.

2.0 pt/A Command 2ME (0.50 lb ai/A) 3.0 to 4.0 pt/A Command 2ME (0.75 to 1.0 lb ai/A) 5.0 pt/A Command 2ME (1.25 lb ai/A) ANYTIME ANYTIME ANYTIME Cotton* Soybeans Peppers Pumpkins Peas Cotton* Soybeans Pumpkins Peppers Cotton* Soybeans 9 MONTHS 9 MONTHS 9 MONTHS Corn

• Field
• Pop
• Seed
• Sweet Cotton Cucurbits Dry Beans Peanuts Potatoes Pumpkins Rice Snap Beans Sorghum Sugar Beets Tobacco Tomatoes (Transplanted) Same as 2.0 pt/A (0.5 lb ai/A), plus:

Peas Same as 3.0 to 4.0 pts/A (0.75 to 1.0 lb ai/A) , plus: Pumpkins 12 MONTHS 12 MONTHS 12 MONTHS All crops All crops All crops

• Refer to the sections "REQUIREMENTS FOR PLANTING TIME APPLICATIONS" and "REPLANTING INSTRUCTIONS". Cover crops, however, may be planted anytime but stand reductions may occur in some areas. DO NOT graze or harvest for food or feed cover crops planted less than 9 months after Command 2ME treatment.

SOYBEANS GENERAL INFORMATION Command 2ME herbicide may be utilized as a preemergent soil appli ed treatment for the control of annual grass and broadleaf wee ds in soybeans. Command 2ME herbicide may be tank mixed with other preeme rgent soybean herbicides to broaden the weed control spectru m compared to the products applied alone. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautiona ry statements of each product in the tank mixture. If the instructions on the tank mix partner label conflict with this Command 2ME herbicide label, DO NOT use in a tank mixture with Command 2ME herbicide. Observe all precautions instructions, and rotational cropping gui delines of each product's label when tank mixing, including al l references to potential carryover and crop injury warnings or restrictions.

Water or liquid fertilizer may be used as a carrier for Command 2ME when applied alone, or when tank mixed with the herbicides listed above, unless use directions specifically state otherwise.

REPLANTING INSTRUCTIONS If initial seeding of soybeans fails to produce a stand, soybeans ma y be replanted in fields treated with Command 2ME alone (or with tank mixtures). DO NOT retreat field with a second application of Command 2ME. When tank mixing with a labeled product refer to the soybean replant instructions for that product. DO NOT replant treated fields with any crop at intervals which are inconsistent with the “ ROTATIONAL CROP GUIDELINES” on this label.

RESTRICTIONS DO NOT apply within 45 days of harvest. DO NOT apply more than 5 pt/A (1.25 lb ai/A) of Command 2ME per application. DO NOT apply more than 5 pt/A (1.25 lb ai/A) of Command 2ME per year. DO NOT soil incorporate herbicide tank mixtures of Command 2ME and other herbicides. DO NOT allow livestock to graze on treated soybean vines or feed treated vines or vine trash to livestock.

Page 12 of 17

Northern Area – See Map COMMAND 2ME HERBICIDE APPLIED ALONE RATES AND WEEDS CONTROLLED1 2.0 pt/A Command 2ME2 (0.50 lb ai/A) 3.0 pt/A Command 2ME (0.75 lb ai/A) 4.0 pt/A Command 2ME (1.0 LB. ai/A) GRASSES GRASSES GRASSES Suppression of some annual grasses Bamyardgrass Crabgrass

• Large
• Smooth Field Sandbur Foxtail
• Giant
• Green
• Robust
• Yellow Goosegrass Panicum
• Common
• Fall
• Texas Seedling Johnsongrass* All grasses controlled at 3 .0 pt/A (0.75 lb ai/A) plus: Berrnudagrass* Broadleaf Signalgrass Cupgrass
• Southwestern
• Woolly* Seedling Johnsongrass Shattercane* Wild Proso Millet* BROADLEAVES BROADLEAVES BROADLEAVES Velvetleaf Spurred Anoda

Velvetleaf Spurred Anoda

plus: Common Ragweed* Galinsoga Jimsonweed* Lambsquarters Prickly Sida Purslane Smartweed*

• Ladysthumb*
• Pennsylvania* Venice Mallow All broadleaves controlled at 3.0 pt/A (0.75 lb ai/A) plus: Black Seeded Plantain Cocklebur* Common Ragweed Jimsonweed Kochia Smartweed
• Ladysthumb
• Pennsylvania Tropic Croton

• Partially Controlled 1 Higher label rates (a minimum of 4.0 pt/A ((1.0 lb ai/A)) are recommended for fields that have previously been in conservation programs, or where heavy weed pressure is anticipated. Select lower to higher rates based on lighter to heavier, soil types. 2 For heavy weed pressure or heavy soils use 2.5 pt/A (0.63 lb ai/A) to control Velvetleaf or Spurred Anoda. NOTE: When using Command 2ME more than 30 days prior to planting, the highest label rate should be used.

Page 13 of 17

ROTATIONAL CROP GUIDELINES Rotate to crops as listed below, otherwise crop injury may occur. Refer to sections headed “ROTATIONAL CROPPING PRECAUTIONS” and "GENERAL INFORMATION". NOTE: When using Command 2ME with other registered herbicides always refer to rotational restrictions and precautions on the other product's label.

2.0 pt/A Command 2ME2 (0.50 lb ai/A) 3.0 pt/A Command 2ME (0.75 lb ai/A) 4.0 pt/A Command 2ME (1.0 LB. ai/A) ANYTIME ANYTIME ANYTIME Soybeans Cotton* Peppers Pumpkins Peas Soybeans Cotton* Peppers Pumpkins Soybeans Cotton* Peppers Pumpkins 9 MONTHS 9 MONTHS 9 MONTHS Corn

• Field
• Pop
• Seed
• Sweet Cotton Cucurbits Dry Beans Peanuts Peppers Potatoes Rice Snap Beans Sorghum Sugar Beets Sweet Potatoes Tobacco Tomatoes (Transplanted) Same as 2.0 pt/A (0.50 lb ai/A ), plus: Peas Same as 3.0 pt/A (0.75 lb ai/A), except: Corn
• Seed
• Sweet 12 MONTHS 12 MONTHS 12 MONTHS Cabbage Tomatoes (all) Wheat Same as 2.0 pt/A (0.50 lb ai/A). Same as 3.0 pt/A (0.75 lb ai/A), plus: Corn
• Seed
• Sweet 16 MONTHS 16 MONTHS 16 MONTHS All crops All crops All Crops

• Refer to the "REQUIREMENTS FOR PLANTING TIME APPLICATIONS" and "REPLANTING INSTRUCTIONS" in the Cotton Directions for Use section. Cover crops, however, may be planted anytime but stand reductions may occur in some areas. DO NOT graze or harvest for food or feed cover crops planted less than 9 months after Command 2ME treatment. DO NOT allow livestock to graze on treated soybean vines or feed treated vines or vine trash to livestock.

Page 14 of 17

Southern Area – See Map COMMAND® 2ME HERBICIDE APPLIED ALONE RATES AND WEEDS CONTROLLED1 2.0 pt/A Command 2ME2 (0.50 lb ai/A) 3.0 pt/A Command 2ME (0.75 lb ai/A) 4.0 pt/A Command 2ME (1.0 lb ai/A) 5.0 pt /A Command 2ME (1.25 lb ai/A) GRASSES GRASSES GRASSES GRASSES Suppression of some annual grasses Barnyardgrass Broadleaf Signalgrass Crabgrass -Large -Smooth Foxtail -Giant -Green Goosegrass Panicum -Common -Fall -Texas Seedling Johnsongrass Field Sandbur* All grasses controlled at 3.0 pints/A (0.75 lb. ai/A) plus: Cupgrass -Southwestern -Wooly Field Sandbur Bermudagrass* Red Rice Itchgrass3 All grasses controlled at 4.0 pints/A (1.0 lb. ai/A) plus: Foxtail -Purple -Robust -Yellow Junglerice* Shattercane* Wild Proso Millet* BROADLEAVES BROADLEAVES BROADLEAVES BROADLEAVES Velvetleaf Spurred Anoda Velvetleaf Spurred Anoda Plus: Common Ragweed* Jimsonweed* Lambsquater Pennsylvania Smartweed* Prickly Sida Purslane Redweed Venice Mallow All broadleaves controlled at 3.0 pints/A ( 0.75 lb. ai/A) plus: Cocklebur Common Ragweed Dayflower Florida Beggarweed Florida Pusley Jimsonweed Kochia* Redvine* Tropic Croton Wild Poinsettia4 All broadleaves controlled at 4.0 pints/A (1.0 lb. ai/A) plus: Balloonvine* Black Nightshade* Curly Dock Joint Vetch* Kochia Morningglory -pitted Pennsylvania Smartweed Pigweed -Redroot* -Smooth* Prostrate Spurge

• Partially Controlled 1 Higher label rates (a minimum of 4 pt/A (1.0 lb. ai/A)) are specified for fields that have previously been in conservation pro grams, or where heavy weed pressure is anticipated. Select rower to higher rates based on lighter to heav ier soil types. For fields that have previously been in conse rvation programs, a minimum application rate of 5 pt/A (1.25 lb. ai/A) for cocklebur or common ragweed control is specified. 2 For heavy weed pressure or heavy soils use 2.5 pt/A (0.63 lb. ai/A) to control Velvetleaf or Spurred Anoda. 3 For control of ltchgrass, DO NOT incorporate Command 2ME. For high weed pressure and heavy soils use 5 pt/A (1.25 lb. ai/A). 4 Use in AR/LA/MS/TX/OK only-for high pressure and heavy soils use 5 pt/A (1.25 lb. ai/A). NOTE: When using Command 2ME more than 30 days prior to planting, the highest label rate needs to be used.

Page 15 of 17

ROTATIONAL CROP GUIDELINES Rotate to Crops as listed below, otherwise crop injury may occur. Refer to sections headed “ROTATIONAL CROPPING PRECAUTIONS” and "GENERAL INFORMATION".

NOTE: When using Command 2ME with other registered herbicides always refer to rotational restrictions and precautions on the other product's label.

2.0 pt/A Command 2ME (0.50 lb ai/A) 3.0 to 4.0 pt/A Command 2ME (0.75 to 1.0 lb ai/A) 5.0 pt/A Command 2ME (1.25 lb ai/A) ANYTIME ANYTIME ANYTIME Soybeans Cotton* Peppers Pumpkins Peas Soybeans Cotton* Peppers Pumpkins Soybeans Cotton* 9 MONTHS 9 MONTHS 9 MONTHS Com -Field -Pop -Seed -Sweet Cotton Cucurbits Dry Beans Peanuts Potatoes Pumpkins Rice Snap Beans Sorghum Sugar Beets Sweet Potatoes Tobacco Tomatoes (Transplanted) Same as 2.0 pints/A (0.50 lb. ai/A), plus: Peas Same as 3.0 to 4.0) pints/A (0.75 to 1.0 Lb.ai/A, plus: Pumpkins 12 MONTHS 12 MONTHS 12 MONTHS All crops All crops All crops

• Refer to the "REQUIREMENTS FOR PLANTING TIME APPLICATIONS" and "REPLANTING INSTRUCTIONS" in the Cotton Directions for Use section. Cover crops, however, may be planted anytime but stand reductions may occur in some areas. DO NOT graze or harvest for food or feed cover crops planted less than 9 months after Command 2ME treatment. DO NOT allow livestock to graze on treated soybean vines or feed treated vines or vine trash to livestock.

COMMAND® 2ME HERBICIDE APPLIED IN COMBINATIONS FOR SOYBEANS Command 2ME herbicide may be tank mixed with other soybean herbici des to broaden the weed control spectrum compared to the prod ucts applied alone. FMC makes no claims as to weed control for any combination of rates or products other than as specified in this label. Please check with your dealer for more recent FM C technical bulletins and label supplements. When applying mixtures of Command 2ME wit h other herbicides, it is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. If the instructions on the tank mix partner label conflict with this Command 2ME herbicide label, DO NOT use in a tank mixture with Command 2ME herbicide. DO NOT incorporate tank mixtures of Command 2ME and other products.

COMMAND 2ME HERBICIDE APPLICATION FOLLOWED BY POSTEMERGENCE TREATMENTS Postemergence herbicides approved for use on soybeans may be applied following treatments of Command 2ME alone or in tank mix combinations for control of emerged weeds as listed on the postemergence product labels. It is the pesticide user’s responsib ility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directi ons for use and precautionary statements of each product in the t ank mixture. If the instructions on the tank mi x partner label conflict with this Command 2ME herbicide label, DO NOT use in a tank mixture with Command 2ME herbicide.

For postemergence applications, the addition of a nonionic surfac tant or crop oil concentrate is required. The nonionic surfact ant should contain at least 80% active ingredient and should be applie d at a rate of 2 pints per 100 gallons of spray mixture. Appl y the crop oil concentrate (COC) at the rate stated on the COC label.

.

Page 16 of 17

CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY

Notice: Read the entire Directions for Use and Conditions of Sale and Limitation of Warranty and Liability before buying or using this product. If the terms are not acceptable, return the product at once, unopened, and the purchase price will be refunded.

The Directions for Use of this product must be followed carefully. It is impossible to eliminate all risks inherently associated with the use of this product. Crop injury, in effectiveness, or other unintended consequences may result because of su ch factors as manner of use or application, weather or crop conditions beyond the control or FMC or Seller. To the extent consistent with applicable law, all such risks shall be assumed by Buyer and User, and, to the extent consistent with applicable law, Buyer and User agree to hold FMC and Seller harmless for any claims relating to such factors.

Seller warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes stat ed on the Directions for Use when used in accordance with the directions under normal condi tions of use. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, FMC MAKES NO WARRANTIES OF MERCHANTABIL ITY OR OF FITNESS FOR A PARTICULAR PURPOSE, NOR ANY OTHER EXPRE SS OR IMPLIED WARRANTIES WITH RESPECT TO THE SELECTION, PURCHASE, OR USE OF THIS PRODUCT. Any warranties, express or implied, having been made are inapplicable if this product has been used contrary to label instruct ions, or under abnormal conditions, or unde r conditions not reasonably foreseeable to (or beyond the control of) seller or FMC, and, to the extent permitted by applicable law, buyer assumes the risk of any such use.

To the extent consistent with applicable law, FMC or seller shall not be liable for any incidental, consequential or special damages resulting from the use or handling of this product. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY OF FMC AN D SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES (INCLUDING CLAIMS BASED ON BR EACH OF WARRANTY, CONTRACT, NEGLIG ENCE, TORT, STRICT LIABILITY OR OTHERWISE) RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SH ALL BE THE RETURN OF THE PURCHASE PRICE OF THE PRODUCT OR, AT THE ELECTION OF FMC OR SELLER, THE REPLACEMENT OF THE PRODUCT.

This Condition of Sale and Limitation of Warranty and Liability may not be amended by any oral or written agreement.

Page 17 of 17

STORAGE AND DISPOSAL DO NOT contaminate water, food, or feed by storage or disposal.

Pesticide Storage STORE ABOVE -4ºF TO KEEP PRODUCT FROM FREEZING. If frozen, thaw before use. Observe recirculation directions under

Mixing and Handling Instructions for Bulk/Mini-Bulk Containers. Keep out of reach of children and animals. Store in original co ntainers only. Store in a dry place. Carefully open containers. After partial use, replace lids and close tightly. DO NOT put concentrate or dilute material into food or drink containers. In case of spill, avoid contact, isolate area and keep out animals and unprotected persons. Confine spills. Call CHEMTREC (Transportation and spills): (800) 424-9300

To confine spill: Dike surrounding area or absorb with sand, cat litter or commercial clay. Place damaged package in a holding container. Identify contents.

Pesticide Disposal Pesticide wastes are toxic. Improper disposal of excess pesticide, spray mixture, or r insate is a violation of Federal law. If these wastes cannot be disposed of by use according to label instructions, contact your State Pesticide or Environmental Control Agency or the Hazardous Waste representative at the nearest EPA Regional Office for guidance.

Container Handling Plastic Non-refillable Containers: DO NOT reuse or refill this container. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Fi ll the container ¼ full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix t ank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Then offer for recycling or reconditioning, or puncture and dispose of in a sanitary lan dfill or by incineration, or, if allowed by State and local authorities, by burning. If burned, stay out of smoke. Returnable/Refillable Sealed Containers: Refill this container with pesticide only. DO NOT reuse this container for any other purpose. DO NOT rinse container. DO NOT empty remaining formulated product. DO NOT break seals. Return intact to point of purchase. Cleaning the container before final disposal is the responsibility of the person disposing of the container. Cleani ng before refilling is the responsibility of t he refiller. To clean the container before final disposal, empty the remaining conte nts from this container into application equ ipment or mix tank. Fill the c ontainer about 10 percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat rinsing procedure two more times. Mini-Bulk Containers: These containers are property of FMC Corporation and are returnable to FMC at FMC’s discretion. These containers are provided for repackaging of Command 2ME* and must not be filled with any other product. Bulk Drums: Command 2ME Bulk drums are returnable to FMC Corporation fo r reuse when the container is completely empty. Bulk drums containing product in excess of 1 gallon cannot be accepted for return.

Container Precautions Before refilling, inspect thoroughly for damage such as cracks, punctures, bulges, dents, abrasions, and damaged or worn threads on closure devices. After filling and before transporting, check for leaks.

Container Restrictions DO NOT refill or transport a damaged or leaking container.

*Any dealer wishing to repackage Command 2ME must comply with all Federal, State and local laws pertaining to bulk herbicide handling and possess a signed repackaging agreement from FMC Corporation.

Label Tracking Information Label Code: D-4241 120825

COMMAND and FMC are Trademarked of FMC Corporation.

© 2024 FMC Corporation. All rights reserved.

FMC Corporation 2929 Walnut Street Philadelphia, PA 19104