crop-chem-docs/corpus/epa_ppls/228-664.md

ETI 114 01 H

• EPA Reg No: 228-664
• Registrant: NUFARM AMERICAS, INC.
• Signal word: Caution
• Active ingredients: Nicosulfuron (75%)
• Label accepted: 2007-11-14
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/079676-00064-20071114.pdf

---

( U.S. ENVIRONMENTAL PROTECTION AGENCY Office of Pesticide Programs Registration Division (7505C) 1200 Pennsylvania Ave., N.W. Washington, D.C. 20460 NOTICE OF PESTICIDE: ..x Registration _ Reregistration (under FIFRA, as amended) Name and Address of Registrant (include ZIP Code): Etigra elf! Pyxis Regulatory Consulting, Inc 4110 136 1h Street, NW Gig Harbor, W A 98332 EPA Reg. Number: Date of Issuance: 79676-64 NOV 14 lO(JJ Term of Issuance: Conditional Name of Pesticide Product: ETI 11401 H On the basis of information furnished by the registrant, the above named pesticide is hereby registered/reregistered under the Federal Insecticide, Fungicide and Rodenticide Act. Registration is in no way to be construed as an endorsement or recommendation of this product by the Agency. In order to protect health and the environment, the Administrator, on his motion, may at any time suspend or cancel the registration of a pesticide in accordance with the Act. The accc~tance. 'II of any name in connection with the registration of a product under this Act is not to be construed as giving the registrant a right to exclusive use of the name or to its use if it has been covered by others. This product is conditionally registered in accordance with FIFRA section 3(c)(7)(A) and (B) provided that you:

1. Generate the one year storage stability (830.6317) and corrosion characteristics (830.6320) studies and submit the results to the Agency upon completion.
2. Submit and/or cite all data required for registration/reregistration of your product when the Agency requires all registrants of similar products to submit such data.
3. Add the phase, ','EPA Registration No. 79676-64" to your label before you.release the product for Signature of Approving Official: Date: 1J~ l'-uJctUr-'4 ~ James A. Tompkins, Product Manager (25) Herbicide Division EPA Fonn 8570-6

(- \ . Page2 EP A Reg. No. 79676-64 4. Submit one (1) copy of the revised final printed label for the record before you release the product for shipment. If these conditions are not complied with, the registration will be subject to cancellation in accordance with FIFRA section 6(e). Your release for shipment of the product constitutes acceptance of these conditions. A stamped copy of the label is enclosed for your records. Enclosure

( ETI11401 H A water dispersible granule herbicide for use on corn ACTIVE INGREDIENT: Nicosulfuron , . c. f. (, 2-[[(4.6-dimethoxypyrimidin-2-yl)aminocarbonyl]aminosuIfonyl]- < r , N.N-dimethyl-3-pyridinecarboxamide ............................................................................ ; ... .;'..( ...... 75.0% OTHER INGREDIENTS: ............................................................................................... : ......... : ...... 6§.'C7r. c TOTAL: .......................................................................................... ; ................................. ...:.": .... 100.'J·10 KEEP OUT OF REACH OF CHILDREN CAUTION cc ." C (! (; (; -0 C (P ., ( r. c " (t c" ccc<.. {: C C C «J C' () c Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalie. l C (If you do not understand this label, find someone to explain it to you in detail.) FIRST AID If in eyes: • Hold eye open and rinse slowly and gently with water for 15-20 minutes. • Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. • Call a poison control center or doctor for treatment advice. If on skin or • Take off contaminated clothing. clothing: • Rinse skin immediately with plenty of water for 15-20 minutes. • Call a poison control center or doctor for treatment advice. If swallowed: • Call a poison controL center or doctor immediately for treatmnt advice. • Have person sip a glass of water if able to swallow. • Do not induce vomiting unless told to do so by the poison control center or doctor. • Do not give anything by mouth to an unconscious person. HOT LINE NUMBER Have the product container or label with you when calling a poison control center or doctor, or going for treatment. You may also contact 1-800-424-9300 for emergency medical treatment information. PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS AND DOMESTIC ANIMALS CAUTION Causes moderate eye irritation. Harmful if absorbed through skin. Avoid contact with skin, eyes, or clothing. EPA Reg. No. 79676- Manufactured for: Etigra™ 501 Cascade Pointe Lane, Suite 1 03 Cary, NC 27513 www.etigra.com EPA Est. No. ETI 114 01 H contains nicosulfuron, the active ingredient used in Accent®. Net Contents: .. \ 1 C C E P 'r E D f~ NOV 14?IJJ7 Under ths Fedel.'t.l Ins~otioide, Fungicida, and Rodentloidls .Ad;. as amended [01' tha pestkllde registered undel' - . . . EPA Reg .. No. 7l( It 7(" -fJ r- 1

( , ( PERSONAL PROTECTIVE EQUIPMENT (PPE) Some materials that' are chemical resistant to this product are listed below. If you want more options follow the instructions for Category A on the EPA chemical-resistance category selection chart. Applicators and other handlers must wear: • Long-sleeved shirt and long pants .Chemicalresistant gloves Category A (such as butyl rubber, natural rubber, neoprene rubber, or . nitrile rubber), all ~ 14 mils • Shoes plus socks Follow manufacturer's instruction for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry. USER SAFETY RECOMMENDATIONS Users should: • Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet. • Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. ENVIRONMENTAL HAZARDS Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark. Do not contaminate water when disposing of equipment washwaters. Do not apply where/when conditions could favor runoff. DIRECTIONS FOR USE It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Do notapply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation. Read the entire label before using this product. AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labeling and with the Worker Protection Standard 40 CFR Part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE), and restricted-entry intervals. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 4 hours. PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is: • Coveralls . • Chemical-resistant gloves Category A (such as butyl rubber, natural. rubber, neoprene rubber, or nitrile rubber), all ?: 14 mils • Shoes plus socks ETI 11401 H should be used only in accordance with recommendations on this label or in supplemental Etigra publications. Etigra will not be responsible for losses or damage resulting from use of this product in any manner not specifically recommended by Etigra. GENERAL INFORMATION ETI 114 01 H is a water-dispersible graule for selective p6stemergence grass weed control in field corn grown for seed or grain, popcorn and sweet corn and may be applied to field corn, high lysine, waxy, . white or other food grade corn hybrids. This product provides weed control via foliar absorption and only controls those weeds that have emerged. ETI 114 01 H is to be used at a rate 1/3 to 1-1/3 ounces per 2

c acre. Do not make more than two applications of ETI 114 01 H in a single cropping season and the combined dosage of sequential applications must not exceed 1-1/3 ounces per acre. WHEN TO APPLY - NORMAL PLANNED USE . Research indicates best results are obtained when applications are made early postemergence when corn and weeds are small. Target applications to corn that is less than 12" tall for best overall performance. ETI 114 01 H may be broadcast to corn that is either up to 20" tall (free standing) or that is exhibiting up to and including 6 leaf collars (V6), whichever is more restrictive. . TIMING TO WEEDS ETI 114 01 H should be applied when grasses are young and actively growing but before they exceed the sizes indicated in Table 1. Heavy infestations of weeds should be treated before they become too competitive with the crop, especially when fertility and 1 or soil moisture are limited. A second application or a timely cultivation is required for later-emerging weeds. Unsatisfactory control may result if applications are made to weeds under stress or to weeds larger than the size indicated in this label. Refer to the LATE OR RESCUE APPLICATIONS section for more information. LATE OR RESCUE APPLICATIONS ETI 114 01 H may be applied as a rescue treatment for the control of escaped grasses in field corn, or as a directed postemergence application on corn that has more than 6 collars or that is taller than 20" (whichever occurs first). • For corn that is 20" - 36" tall: Apply ETI 114 01 H using drop nozzles ONLY and avoid spraying into the whorl of cornstalks. • Do NOT apply to crop that is taller than 36" or that exhibits 10 or more collars (V10), whichever is most restrictive. Control for applications made to weeds larger than those . listed on this label may vary from suppression to complete control with the level of control depending on the weed species, stage of growth, and environmental conditions. . Because rescue applications are typically unplanned, choices must be made between the risks that arise from applications made outside of the optimal timeframe for ETI 114 01 H use and the effects of harvest complications and / or season long grass competition. The risks from improperly timed ETI 11401 H use that should be considered include, but are not limited to: Yield Loss Due to Competition: Research indicates that corn yields may be reduced by competition from foxtail exceeding 4 inches in height. The risk of yield losses due to prolonged competition with the crop even though control may be acceptable may increase if applications are made to foxtail and other annual grasses that exceed the size stated on the label. Incomplete Control of Grasses Beyond Labeled Size:. Reduced corn yield may result when applications are made to grasses that exceed the labeled sizes due to reduced control of the grasses. Incomplete Grass Control Due To Herbicide Stress: Reduced control of grasses under stress from previous herbicide applications may result due to the stressed grasses not be actively growing, therefore reducing susceptibility to ETI 11401 H in rescue situations. Ear Malformation: The potential for ear malformation (pinching) increases when ETI 114 01 H is applied to corn that has 7 to 10 collars (V7 to V10). This risk may be greatly reduced, but not eliminated, by using drop nozzles properly adjusted so as to not apply ETI 11401 H into the corn whorl. RATE For weeds in the size ranges listed below, optimum control is obtained using 2/3 ounces of ETI 114 01 H per acre. Weeds exceeding the listed by up to 50% may be partially controlled with rates between 2/3 and 1-1/3 ounces of ETI114 01 H per acre. For limited control of certain small grass weeds, ETI 114 01 H may be applied at rates of 1/3 to 2/3 ounces. For more information, refer to Table 2 under ADDITIONAL RECOMMEDATIONS. Due to drought or other environmental factors, grassy weeds may not reach the sizes listed below as they mature (more than 3 tillers). Because weed sensitivity to ETI 114 01 H decreases as weeds mature, stressed weeds that are maturing rapidly should be treated before they reach the stages listed below. 3

c When applied as directed, 2/3 ounces of ETI 11401 H per acre will control the following weeds: Table 1. Weeds controlled with 2/3 ounces ETI114 01 H Maximum Height or Grasses Diameter (Inches) Barnyardgrass 4 Broadleaf siqnalqrass 2 Foxtails (bristly, giant, green, yellow) 4 Itchqrass 6 Johnsongrass Seedling 12 Rhizome 18 Panicum (Texas, Browntop) 3 Fall 4 QuackQrassT 10 Ryegrass (Italian, perennial) 6 Sandbur (field, longspine) T 3 Shattercane 12 Sorghum almum 12 Timothy 6 Volunteer cereals (barley, oats, rye, 6+ triticale, wheat) Wild Oats 4 Wild proso millet 4. Wirestem muhlyT 8 WitchQrass 6 Woolly Cupgrass T . 4 t Requires the use of the COC plus ammonium nitrogen fertilizer. Cultivation or re-treatment may be required. Refer to "FOR ADDITIONAL CONTROL OF LATER EMERGING GRASSES." :j: 10" in WA, OR, 10, and MT where the use of MSO adjuvants are preferred. See SPRAY ADJUVANTS. Maximum Height or Broadleaves Diameter (Inches) Burcucumber 3" Dandelion 6" Hemp dogbane 4" Jimsonweed 3" Morningglory (Ivyleaf, pitted) tall 3" 2" Pigweed (red root, smooth) 4" PokeweedT 4" Smartweeds (Iadysthumb, PA) 4" Thistle, Canada T 4" t Suppression only. Popcorn, Field Corn Grown for Seed and Sweet Corn ETI 114 01 H may be applied to field corn grown for seed or popcorn that exhibits up to and including 5 leaf-collars (V5) or that is less than 20" tall (free-standing), whichever is most restrictive. Do NOT apply to corn that exhibits more than 5 leaf-collars (V5) or that is taller than 20" (whichever is more restrictive). Make either a broadcast application or apply with drop nozzles. ETI 114 01 H has been tested on seed corn inbreds or yellow popcorn hybrids for sensitivity by many seed companies and excellent safety has been reported. Unless specifically approved by the seed company, do NOT apply ETI 114 01 H to any white popcorn inbred or white popcorn hybrid (including "White Dynamite" popcorn). 4

( '. A single application (per year) of ETI 114 01 H may be applied to certain sweet corn hybrids grown for fresh markets or under contract for processing. Apply broadcast or with drop nozzles (post-directed) on sweet corn up to 12 inches tall or up to and including Sleaf-collars (VS). For sweet corn 12-18 inches tall, apply using drop nozzles only. Do NOT apply to sweet corn taller than 18 inches or that has 6 or more leaf-collars (V6). Because not all sweet corn hybrids have been tested for crop tolerance and hybrid sensitivity to ETI 114 01 H is highly variable, contact your Etigra Sales Representative. for information on local sweet corn hybrids that have been·evaluated with ETI 11401 H. . ( . Additionally, because not all seed corn inbreds, popcorn or sweet corn hybrids have been tested, nor does Etigra have access to all seed company data, Etigra is not responsible for any crop injury arising' from the use of ETI 11401 H on field corn grown for seed, popcorn or sweet corn. Be sure to check tank mix partner label(s) for tolerances and instructions for use when tank mixing. When applying ETI114 01 H to popcorn, sweet corn or field corn grown for seed that has been previously treated with a soil insecticide, be sure to refer,to the SOIL INSECTICIDE INTERACTION INFORMATION section for additional information. Spray Adjuvants ETI 114 01 H must be applied with either a crop oil concentrate or a nonionic surfactant. Additionally, an ammonium nitrogen fertilizer must be used unless specifically prohibited by tank mix partner labeling. For difficult to control species such a woolly cupgrass, quackgrass, sandbur, and wirestem muhly, crop oil concentrate plus ammonium nitrogen fertilizer is the preferred adjuvant system. Prior to using other adjuvant systems, consult your local Etigra representative. If another herb'icide is tank mixed with ETI 114 01 H, be sure to select adjuvants authorized for use with both products. Products must contain only EPA­ exempt ingredients (40 CFR 1001). Crop Oil Concentrate (COC)- Petroleum or Modified Seed Oil (MSO) • Apply at 1% v/v (1 gallon per 100 gallons spray solution) or, under arid conditions, 2% v/v. If specified in an Etigra product bulletin, MSO adjuvants may be used at O.S% v/v. • If specifically noted on adjuvant product labeling, MSO adjuvants may be used at O.S% v/v (O.S gallons per 100 gallons spray solution). • A COC adjuvant must contain at least 80% high quality petroleum (mineral) or modified vegetable seed oil with at least 1S% surfactant emulsifiers. Nonionic Surfactant (NIS) • Apply at 0,2S% vlv (1 quart per 100 gallons spray solution) or, under arid conditions, O.S% v/v. • Use a surfactant with a hydrophilic / lipophilic balance (HLB) greater than 12. Ammonium Nitrogen Fertilizer • Use 2 pounds per acre of a spray-grade ammonium sulfate (AMS) or 2 quarts per acre of high­ quality urea ammonium nitrate (UAN) such as 28%N or 32% N. Under arid conditions, use 4 quarts per acre UAN or 4 pounds per acre AMS. • Do NOT use liquid nitrogen fertilizer as the total carrier solution. Special Adjuvant Types • Combination adjuvant products may be used at doses that provide the required amount of NIS, COC, MSO andlor ammonium nitrogen fertilizer. Consult product literature for use rates and restrictions. • Other adjuvant types may be used if they provide the same functionality and have been evaluated and approved by Etigra. MIXING INSTRUCTIONS

1. Fill the tank 14 to 1/3 full of water.

2. Begin agitation and add the recommended amount of ETI 11401 H. 3, Continue agitation until the ETI 11401 H is fully dispersed (at least S minutes). 4, Once fully dispersed, maintain agitation and continue filling the tank with water. As the tank is filling, add the required spray adjuvants (crop oil concentrate, nonionic surfactant, or ammonium nitrogen fertilizer). Before adding any other material (other than spray adjuvants), be sure to thoroughly mix the ETI114 01 H with the water. S

3. Settling will occur if the mixture is not continuously agitated. Thoroughly re-agitate prior to using if settling occurs.

4. To avoid product degradation, apply ETI 11401 H spray mixture within 24 hours of mixing. NOTE: If ETI 11401 H and a tank mix partner are to be applied in multiple loads, pre-slurry the ETI114 01 H in clean water prior to adding to the tank. This will prevent the tank mix partner from interfering with the dissolution of the ETI 11401 H. WHEN TO APPLY· SEQUENTIAL APPLICATIONS FOLLOWING REDUCED RATES OF PREEMERGENCE HERBICIDES ETI 114 01 H may be used in a planneq postemergence weed control program in corn as a sequential application following a reduced rate of a preemergence herbicide. Prior to corn emergence, apply a reduced rate of preemergence grass herbicide and then follow with a postemergence application of ETI 11401 H. Products such as DuPont CINCH®, CINCH® ATZ, Balance® Pro, Axiom®, Dual® II, Magnum, Surpass®, Outlook® and Harness® Xtra may be applied at rates as low as y.. to % of the full labeled use rate, followed with a sequential postemergence application of ETI 114 01 H. Prior to applying ETI 114 01 H, refer to the preemergence grass herbicide label for application information, rotational crop guidelines, cautionary statements and use restrictions. NOTE: Do NOT apply ETI 114 01 H to corn injured by previous herbicide applications made to the current or preceding crop. TANK MIX APPLICATIONS - For additional control of broad leaf weeds For additional control of broad leaf weeds, ETI 114 01 H may be tank mixed with many herbicides registered for postemergence application in corn. Refer to the tank mix partner label for weeds controlled, adjuvant and crop rotation information, precautions and use restrictions. When tank mixing, be sure to apply the most restrictive language on either label. In addition to the tank mixtures noted above, for improved control of many broadleaf weeds (including cocklebur, dandelion, Eastern black nightshade, lambsquarters, pigweeds, ragweeds, PA smartweed and velvetleaf), ETI 114 01 H may be tank mixed with the products listed below at the following application rates: Product AJ)plication Rate (per acre) atrazine T Up to 2 Ibs active ingredient dicamba(e.g. Clarity"" - 4lb/gal dicamba) 2 - 4 fl oz dicamba + atrazine (e.g. Marksman"" - 1.1 Ib/gal dicamba) t 8 - 16 fl oz Callisto"" 1.5 ~ 3.0 fl oz Distinct<lll ; 1 ·2 oz Exceed"" -I' 0.25 - 0.5 oz Northstar"" + 2.5 - 5.0 oz t Make applications to emerged corn before the corn reaches 12" tall. :j: Do NOT apply to sweet corn, seed corn, or popcorn. For additional information, refer to ADDITIONAL RECOMMENDATIONS AND/OR RECOMMENDATIONS FOR SPECIFIC WEED PROBLEMS below. The rates listed above are for the specific products noted in the table and the rates of active ingredients should be adjusted to correspond to the products indicated if other' brands or formulations are used. Because ETI 114 01 H may not have been tested with formulations of products other than those listed, prior to using in unlisted formulations be s.ure to check with the manufacturer for information 'on tank mix compatibility (refer to the TANK MIX COMPATIBILITY TESTING section). For tank mixtures when using products at the low end of the rate range indicated in the table, the preferred adjuvant is crop oil concentrate plus ammonium nitrogen fertilizer. For tank mixtures containing dicamba, using a nonionic surfactant in place of crop oil concentrate is permitted; however, overall weed control may be reduced. For adjuvant rate recommendations, refer to the SPRAY ADJUVANTS section. NOTE: Do NOT use MSO adju~ants when tank mixing ETI 114 01 H with more than 1.5 ounces of the herbicide Callisto®. . 6

c ADDITIONAL RECOMMENDATIONS 1 RECOMMENDATIONS FOR SPECIFIC WEED PROBLEMS Reduced Rates of ETI114 01 H For control of the small grass weeds noted in the table below, ETI 114 01 H may be applied at a rate of 1/3 - 2/3 ounces. When applying reduced rates of ETI 11401 H, always use a crop oil concentrate plus ammonium nitrogen fertilizer. Table 2. Weeds Controlled with Reduced Rates of ETI114 01 H Maximum Height or Diameter Application Rate Grasses 1/30z Yz oz 2/30z Barnyardgrass 2" 3" 4" Foxtails (bristly, Qiant, Qreen) 2" 3" 4" yellow - 2" 4" ItchQrass 2" 4" 6" Johnsongrass, seedling - 8" 12" rhizome - 8" 18" Panicum (Texas, browntop) 1" 2" 3" Fall 1" 2" 4" Sandbur (field, longspine) - 1" 3" Shattercane 3" 6" 12" Sorghum almum 3" 6" 12" Timothy 2" 4" 6" Volunteer cereals - 2" 6" Wild oats 2" 3" 4" Wild proso millet - 2" 4" Witchgrass 2" 4" 6" Woolly cupgrass - - 4" Tank Mixtures with Atrazine For additional control of many broad leaf weeds (including those listed in the table below), ETI 114 01 H may be tank mixed with up to 2 pounds a.i. atrazinet : . . Broadleaf Weed Maximum Height or Diameter Sicklepod 2" Prickly sida 2" Wild radish 12" Cutleaf eveninQ primrose 6" Florida pusley 2" t For best results add 0.25 - 0.20 quarts Atrazine 4L OR 4 - 35 ounces Atrazine 90 OF. NOTE: Products containing atrazine are restricted use products. Reduced control of grasses (antagonism) may result if.ETI 114 01 H + atrazine tank mixtures are applied to grasses exceeding the maximum labeled height or to grasses under low moisture stress. Be sure to refer to the atrazine product label for information regarding the maximum amount of atrazine that may be applied in a season PRIOR to applying ETI 11401 H + atrazine tank mixtures. Tank Mixtures with Callisto® Herbicide For weed control as indicated in the table below, ETI 11401 H may be tank mixed with 1.5 - 3.0 fl oz per acre of Callisto® 'herbicide: Maximum Height or Diameter Callisto<l:l> alone Callisto<l:l> + atrazine T Species 1.50z 2.0oz 3.0oz 1.50z 2.0oz 3.0oz Cocklebur 4" 4" 4" 10" 10" 10" Dandelion 10" 10" 10" 10" 10" 10" 7 -.--_ .. _ .. _-- --------------------------------------

Maximum Height or Diameter Callisto"" alone CaliistoQl/ + atrazine T Species 1.50z 2.0oz 3.0oz 1.50z 2.0oz 3.0oz Jimsonweed 4" 4" 4" 4" 10" 10" Kochia - - 4" - 4" 4" Lambsquarters, common 4" 4" 4" 10" 10" 10" Morning Glory, Ivyleaf 4" 4" 4" 4" 4" 4" Nightshade, Black 4" 4" 4" 10" 10" 10" Eastern black Pigweed, Redroot, Smooth 4" 4" 4" 10" 10" 10" Ragweed, Common -- -- -- 4" 10" 10" Ragweed, Giant -- 3" 4" 4" 10" 10" Smartweed, ladysthumb - ·4" 4" 4" 10" 10" Smartweed, Pennsylvania 4" 4" 4" 4"· 10" 10" Sunflower, Common 4" 4" 4" 4" 4" 10" Velvetleaf 4" 4" 4" 10" 10" 10" Waterhemp, -- 4" 4" 4" 10" 10" Tall & common t When weeds are at maximum height. adding 0.25 - 0.75 pounds (a.i.) of atrazine per acre may provide better control. . For improved grass and broad leaf weed control, ETI 114 01 Htank mixtures with 1.5 ounces of Callisto® (with or without atrazine) may be applied with 0.5% v/v MSOspray adjuvant. When tank mixing ETI114 01 H with more than 1.5 ounces Callisto®, do NOT use a MSO adjuvant; use a petroleum-based crop oil concentration plus an ammonium nitrogen fertilizer. For Additional Control of Later Emerging Grasses For residual activity on later-emerging flushes or grass, ETI 114 01 H may be tank mixed with full or reduced rates of preemergence grass herbicides labeled for early postemergence application to field corn (such as DuPont™ CINCH®, CINCH® ATZ, Prowl®, Surpass® EC, Dual® " Magnum, or Outlook®). Application MUST be made before the grass emerges and before.other grass weeds on the ETI 11401 H label exceed their labeled sizes. When applications are made early postemergence to small grass weeds, a non ionic surfactant in place of crop oil concentrate is recommended for tank mixtures with preemergence grass herbicides. Refer to the SPRAY ADJUVANTS section for adjuvant rate recommendations. Do NOT add Callisto® herbicide to the tank mixture when tank mixing ETI 114 01 H with EC formulated preemergence grass herbicides (such as DuPont™ CINCH®, Dual® " Magnum, or Prowl®). When other formulations of preemergence grass herbicides are tank mixed with ETI 114 01 H + Callisto® (such as CINCH® ATZ or Bicep" Magnum): limit broadleaf weed sizes to less than or equal to 4" tall, limit the preemergence herbicide rates to 2/3 times full rates, and always add a non ionic surfactant in place of crop oil concentrate. . When tank mixing ETI 114 01 H with Lumax® herbicide: limit applications to corn up to 5" tall, limit Lumax® rates to no more than 2 pints, always add a non ionic surfactant in place of crop oil concentrates, and omit adjuvants containing ammonium nitrogen fertilizer. NOTE: ETI 114 01 Hand preemergencegrass herbicide tank mixes MUST be broadcast applied postemergence to field corn before the crop exceeds the heights listed on the preemergence grass herbicide label. For complete postemergence application information, rates,and restrictions, refer to the WHEN TO APPLY - POSTEMERGENCE section and the preemergence grass herbicide label. 8

( C TANK MIXTURES WITH INSECTICIDES ETI 114 01 H may be tank mixed with pyrethroid or carbamate insecticides. Refer to the SOIL INSECTICIDE INTERACTION section for information on using ETI 114 01 H following soil insecticide applications. Other Tank Mixtures Other than the exceptions noted, in addition to the tank mix partners .and rates indicated above, other products registered for use in corn may be tank mixed or sequential applications of full or reduced rates applied following a ETI 11401 H application as long as: • The tank mixture is not specifically prohibited in the label of the tank mix product. • The tank mix product has the same adjuvants, method of application, timing, and use restrictions as ET111401H. • The tank mix combination is compatible as determined by the jar test described in the TANK MIX COMPATIBILITY TESTING section below. NOTE: Weed control and crop response with tank mixtures not specifically recommended in this label are the responsibility of the user and manufacturer of the tank mix product. Tank Mix Precautions Unless the label of either tank mix partner specifies the maximum rate that may be used, do NOT tank mix ETI 11401 H with other products that contain the same active ingredient (nicosulfuron). Do NOT exceed labeled application rates. A corn plant's predisposition to develop fused tissue emerging form the whorl (rattail) after the V-11 stage may increase·if tank mixes or products containing dicamba (e.g., Clarity®, Marksman®) that are applied to small corn under early stressful conditions. Refer to the ENVIRONMENTAL CONDITIONS section for a description of these stressful conditions. To avoid crop injury or antagonism, apply the following products at least seven days prior-to or three days after the application of ETI 114 01 H: • Tank mixes of ETI 11401 H with Basagran® and Laddok® may result in severe crop injury. • Tank mixing ETI 114 01 H with products containing 2,4-D may result in severe grass control antagonism. . • Tank mixing ETI 114 01 H with foliar-applied organophosphate insecticides (e.g., Lorsban®,· malathion, parathion, etc.) may result in severe crop injury. Tank Mix Compatibility Testing To ensure ETI 114 01 H with other tank mix partners, perform the following jar test prior to mixing:

1. Mix the tank mix ingredients using their relative proportions in a clear glass quart jar with a lid.
2. Invert the jar containing the mixture several times and observe the mixture for approximately Y2 hour.
3. If the mixture balls-up, layers, or forms flakes, sludges,· gels, oily films or other preCipitates, the tank mix combination is not compatible and should not be used. SEQUENTIAL ETI114 01 H APPLICATIONS To control grasses under the following conditions, a sequential application of ETI114 01 H may be necessary: • Perennial grasses that regrow from underground stems or roots, depending upon environmental condWons. . • Regrowth of treated annual grasses due to adverse environmental conditions following applications. • Annual grasses that have more than one flush of emerging seedlings. In a single season, the combined dosage of all sequential applications must not exceed 1 1/3 ounces per acre of ETI 11401 H. Cultivation 9

c ( A timely cultivation may be necessary to control suppressed weeds or weeds that emerge after an application of ETI 11401 H. For best results, cultivate 7-14 days after ETI114 01 H is applied or as soon as new weeds are beginning to be established. . Environmental Conditions and Biological Activity ETI 11401 H provides best results when applied to young actively growing weeds. For best results, apply during war.m, moist conditions (i.e., 70°F or more) with· adequate soil moisture both before and after application. Weed spectrum and size, spray coverage, growing conditions before and after treatment, soil moisture, and adjuvant selection are all factors that will affect the degree and duration of control. ETI 11401 H is rainfast in 4 hours after application. If weeds that are under stress or that exceed the maximum label height are treated, incomplete control may result. Crop injury or poor weed control may result from applications made to plants under stress from: . • Carryover from a previous year's herbicide application or prior herbicide applications • Weather that is abnormally cold or hot • Environmental conditions such as hail damage, drought, water-saturated soils or frost • Injury caused by insects, nematodes, or disease Severe stress from conditions preceding or immediately following application may also result in crop injury or poor weed control. This stress issue affects all weeds, but especially weeds such as woolly cupgrass, green and yellow foxtail and wild proso millet. ' When the corn or grass weeds are under stress, delay the application until the stress passes and both weeds and corn resume active growth. Soil Insecticide Interaction Information Crop response varies with insecticide used, insecticide application method, field corn type and soil type. Because ETI 114 01 H may interact with certain insecticides previously applied to the crop, be sure to verify that ETI114 01 H is compatible with any insecticides previously applied prior to use. Do NOT app!?, ETI 114 01 H to corn previously treated with Counter® 15G or to corn treated at cultivation with Counter 20CR over the row or in-furrow. Regardless of soil type, ETI 114 01 H may be aplied to corn previously treated with non­ organophosphate (OP) soil insecticides or Fortress®, Aztec or Force® insecticides. UnacceRtable crop inju may occur if applications of ETI 114 01 H to corn previously treated with Counter® 20CR, Lorsban , or Thimet® may occur, especially on soils of less than 4% organic matter. Crop Rotation The amount of ETI 114 01 H which may be present in the soil depends on application rate, soil pH and organic matter content, elapsed time since application, crop production practices, and environmental factors. ETI 11401 H dissipates rapidly in warm, acidic, microbiologically active soils. Rotational crops vary in their response to low concentrations of ETI 114 01 H remaining in the soil, and if dry weather prevails between application and rotational crop planting in cold, high-pH soils, injury to rotational crops may occur. For additional guidelines, consult your local Etigra representative. Because soil pH varies within fields recropping should be based on the highest soil pH within each field. Soil pH should be determined on representative soil samples taken at 0-4" depth by laboratory analysiS using the 1:1 soil:water suspension method. For recommended soil sampling procedures, consult local extension publications. . When using ETI 11401 H at a maximum rate of 1 1/3 ounces, the following rotational intervals should be observed: ETI11401 H ROTATIONAL CROP GUIDLINES - No Soil pH Restrictions Rotational Crop Rotation Interval (Months) Alfalfa" 12 . Cereals, spring (barley> oats,lYe, wheat} 8 Cereals, winter (barley, oats, rye, wheat) 4 Corn (field, sweet) Anytime Corn (pop, sweeW 10 10

Cotton 10 \ \ \ '6 Dry Beans, Peas, Snap Beans 10 Red Clover 12 Soybeans 0.5 (15 days) t Sweet corn varieties "Merit", Carnival", and "Sweet Success" have a minimum time interval of 15 months. :t: The minimum time interval is 10 months for the state of Kansas east of Highway 75, for Minnesota east and south of the Red River Valley and for the states east of the line formed by the western borders of Iowa, Missouri, Arkansas and Louisiana. ETI114 01 H ROTATIONAL CROP GUIDLINES - Soil pH ~ 6.5 and < 7.5 restrictions Rotation Interval (Months) Rotational Crop pH 7.5 pH> 7.5 Sugarbeets a Potatoes b 10 . 18t All other crops not listed in these three 10 18 tables a) Except on irrigated sites in Colorado, Wyoming, Nebraska, Texas, Michigan and Ohio where precipitation following application must exceed 25" prior to planting beets, where the interval is 10 months on soils with pH < 7.5. Sites in Minnesota east and south of the Red River Valley may follow these guidelines provided maximum rates of ETI 11401 H do not exceed 0.67 oz. b) In the States of WA, OR, ID or Utah, irrigated potatoes following irrigated corn treated can be. planted 10 months after using ETI 114 01 H on sprinkler irrigated corn with no soil pH restrictions, providing the maximum use rate on corn does not exceed 1.0 ounce product per season. Corn treated with ETI 114 01 H must be grown to maturity and receive a minimum of 18 inches of irrigation water before potatoes can be planted at this rotation interval. Injury to potatoes may occur if less than 18 inches of irrigation is used on the previous corn crop. ETI 11401 H may not be used in a tank-mix or sequential application program with other ALS-inhibiting herbicides such as Exceed® or Beacon®. t The cumUlative precipitation in the 18 months following application must exceed 28" in order to rotate to sugarbeets or potatoes in North Dakota and northwest Minnesota. ETI11401 H ROTATIONAL CROP GUIDLINES - Soil pH ~ 7.5 restrictions Rotation Interval (Months) Rotational Crop pH 7.5 pH> 7.5 Sorghum 10 18T Sunflowers 1 fj: 18 t Except in Texas and Oklahoma east of Highway 281 where the rotational interval is 10 months, regardless of pH. :t: Precipitation following application must exceed 14" prior to planting sunflowers. ETI11'4 01 H ROTATIONAL CROP GUIDLINES -: For a single 0.67 ounce application per cropping season. NOTE: Rotational intervals should be extended to 12 months if drought conditions prevail after application and before the rotational crop is planted, unless sprinkler irrigation has been applied and totals greater than 15" during the growing season. Rotational Crop Rotation Interval (Months) AlfalfaT Canola Flax+ 10 Potato Red Clover Sunflower 11

( " . t It is best to use deep fall tillage such as plowing prior to planting alfalfa on sprinkler irrigated fields in Idaho, Utah and northern Nevada. Furrow irrigated soils may result in less. product degradation, causing some crop injury. t If drought conditions prevail after application and before the rotational crop is planted, rotational intervals should be extended to 18 months UNLESS sprinkler irrigation has bee~ applied and totals greater than 15" during the growing season. APPLICATION INFORMATION USE PRECAUTIONS • Do NOT apply ETI114 01 H through any type of irrigation system. • All direct or indirect contact (such as spray drift) with crops other than field corn should be avoided because many crops are highly sensitive to ETI 114 01 H (refer to SPRAY DRIFT MANAGEMENT). • Use 50-mesh or larger strainer screens. GROUND APPLICATION Broadcast Application - • For best results, use a minimum of 15 gallons of water per acre (15 GPA). • For light, scattered stands of weeds use a minimum of 10 gallons of water per acre (GPA). • To minimize spray drift and for optimal product performance, adjust the spray boom to the lowest possible spray height recommended in manufacturers' specifications: • Select nozzles and pressure that deliver MEDIUM spray droplets, for example, as indicated in nozzle manufacturer's catalogues and in accordance with ASAE Standard S572. Nozzles that deliver COARSE spray droplets may be used to reduce drift, provided spray volume is increased to main coverage on small Weeds. • Be sure that equipment is setup to avoid applying excessive amounts directly over the rows and into the corn plant whorl (most likely to occur ~hen a nozzle is positioned directly above the row). • Crop injury may be caused by overlaps or starting, stopping, slowing, and turning while spraying; Band Application - • Use proportionately less spray mixture and calibrate the band applicator being sure to not exceed the labeled rate. • Follow the manufacturer's instructions for nozzle type (flat fans), orientation, distance of nozzles from the crop and weeds,spray pressure, spray volumes and calibration. AERIAL APPLICATION NOTE: Aerial applications are prohibited in New York state and California. • Do NOT apply during a temperature inversion, when winds are gusty, or when conditions favor poor coverage and/or off-target spray movement. . • Use nozzle types and arrangements that will provide optimum spray distribution and maximum coverage at a minimum 3 GPA. SPRAYER PREPARATION I CLEANUP To avoid subsequent crop injury, thoroughly clean all mixing and spray eqUipment immediately following applications of ETI114 01 H. . , When spraying or mixing equipment will be used over an extended period to apply multiple loads of ETI 114 01 H, partially fill the tank with fresh water at the end of each day of spraying, flush the boom and hoses, and allow to sit overnight. Prior to applying ETI 114 01 H, the spray equipment must be clean and free of all previous pesticide deposits. Be sure to clean all application equipment BEFORE applying ETI 114 01 H by following the cleanup procedures specified on the label of the product previously sprayed and following the label directions for proper disposal of the rinsate. If no cleanup· proceaure is provided, use the following procedure. 12

Cleanup Procedure: NOTE: Steam cleaning aerial spray tanks will help to dislodge any visible pesticide deposits.

1. Drain the tank and thoroughly hose down the interior surfaces. Flush the tank, hoses, and boom with clean water for a minimum of 5 minutes. .
2. Partially fill the tank with clean water and add one gallon of household ammonia (containing 3% active) for every 100 gallons of water. Finish filling the tank with water, then flush the cleanjng solution through the hoses, boom, and nozzles. Add more water to completely fill the tank and allow to agitate/recirculate for at least 15 minutes. Again, flush the hoses, boom and nozzles with the cleaning solution, then drain the tank.
3. Repeat Step 2.
4. Remove the nozzles and screens and clean separately in a bucket containing the cleaning agent and water.
5. Thoroughly rinse the tank with clean water for a minimum of 5 min, flushing the water through the hoses and boom. SPRAY DRIFT MANAGEMENT The interaction of many equipment and weather-related factors determines the potential for spray drift. The applicator is responsible for considering all these factors when making application decisions. AVOIDING SPRAY DRIFT IS THE RESPONSIBILITY OF THE APPLICATOR. IMPORTANCE OF DROPLET SIZE . The most effective way to reduce drift potential is to apply large droplets (>150-200 microns). The best drift management strategy is to apply the largest droplets than provide sufficient coverage and control. The presence of sensitive species nearby, the environmental conditions, and pest pressure may affect how an applicator balances drift control and coverage. APPLYING LARGER DROPLETS REDUCES DRIFT POTENTIAL, BUT WILL NOT PREFENT DRIFT IF APPLICATIONS ARE MADE IMPROPERLY OR UNDER UNFAVORABLE ENVIRONMENTAL CONDITIONS! See Wind, Temperature and Humidity, . and Temperature Inversions sections of this labeL Controlling Droplet Size - General Techniques Volume - Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with higher rated flows produce larger droplets. Pressure - Use the lower spray pressures recommended for the nozzle. Higher pressure reduces droplet size and does not improve canopy penetration. WHEN HIGHER FLOW RATES ARE NEEDED, USE A HIGHER-CAPACITY NOZZLE INSTEAD OF INCREASING PRESSURE. Nozzle Type - Use a nozzle type that is designed for the intended application. With most nozzle types, narrower spray angles produce larger droplets. Consider using low-drift nozzles. Controlling Droplet Size - Aircraft Number of Nozzles. - Use the minimum number of nozzles with the highest flow rate that provide uniform coverage. Nozzle Orientation - Orienting nozzles so that the spray is emitted backwards, parallel to the airstream will produce larger droplets than other orientations. Nozzle Type - Solid stream nozzles (such as disc and core with swirl plate removed) oriented straight back produce larger droplets than other nozzle sizes. Boom Length - The boom length should not exceed % of the wing or rotor length - longer booms increase drift potential. Application Height - Application more than 10 feet above the canopy increases the potential for spray drift. BOOM HEIGHT Setting the boom at the lowest labeled height (if specified) which provides uniform coverage reduces the exposure of droplets to evaporation and wind. For ground equipment, the boom should remain level with the crop and have minimal bounce. WIND 13

c . c. lloll ~ Drift potential increases at wind speeds of less than 3 mph (due to inversion potential) or more than 10 mph. However, many factors, including droplet size and equipment type determine drift potential at any given wind speed. AVOID GUSTY OR WINDLESS CONDITIONS. Note: Local terrain can influence wind patterns. Every applicator should be familiar with local wind patterns and how they affect spray drift. TEMPERATURE AND HUMIDITY When making applications in hot and dry conditions, set up equipment to produce larger droplets to reduce effects of evaporation. TEMPERATURE INVERSIONS Drift potential is high during a temperature inversion. Temperature inversions restrict vertical air mixing, which causes small suspended droplets to remain close to the ground and move laterally in a concentrated cloud. Temperature inversions are characterized by increasing temperature with altitude and are common on nights with limited cloud cover and light to no wind. They begin to form as the sun sets and often continue into the morning. Their presence can be indicated by ground fog; however, if fog is not present, inversions can also be identified by the movement of smoke from a ground-source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing. SHIELDED SPRAYERS Shielding the boom or individual nozzles can reduce the effects of wind. However, it is the responsibility of the applicator to verify that the shields are preventing drift and not interfering with uniform deposition of the product. INTEGRATED PEST·MANAGEMENT This product may be used as part of an Integrated Pest Management (IPM) program that can include biological, cultural, and genetic practices aimed at preventing economic pest damage. IPM principles and practices include field scouting or other detection methods, correct target pest identification, population monitoring, and treating when target pest populations reach locally determined action thresholds. Consult your state cooperative extension service, professional consultants or other qualified authorities to determine. appropriate action treatment threshold levels for treating specific pest/crop systems. in your area. RESISTANCE When herbicides that affect the same biological site of action are used repeatedly over several years to control the same weed species in the same field, naturally-occurring resistant biotypes may survive a correctly applied herbicide treatment, propagate, and become dominant in that field. Adequate control of these resistant weed biotypes cannot be expeGted. If weed control is unsatisfactory, it may be necessary to retreat the problem area using a product affecting a different site of action. To better manage herbicide resistance through delaying the proliferation and possible dominance of herbicide resistant weed biotypes, it may be necessary to change cultural practices within and between crop seasons such as using a combination of tillage, retreatment, tank-mix partners and/or sequential herbicide applications that have a different site of action. Weed escapes that are allowed to go to seed will promote the spread of resistant biotypes. It is advisable to keep accurate records of pesticides applied to individual fields to help obtain information on the spread and dispersal of resistant biotypes. Consult your agricultural dealer, consultant, applicator, . and/or appropriate state agricultural extension service representative for specific alternate cultural practices or herbicide recommendations available in your area. IMPORTANT PRECAUTIONS Injury or loss of desirable vegetation may result from failure to observe the following: • Do not apply ETI 11401 H or drain or flush application eqUipment on or near desirable trees or other , plants, or on areas where their roots may extend, or in locations where the chemical may be washed or moved into contact with their roots. • Do not use on lawns, walks, driveways, tennis courts or similar areas. 14

I l • • Prevent drift of spray to desirable plants. Do not contaminate any body of water. ( '-. .. • Thoroughly clean application equipment immediately after use. (See the Sprayer Cleanup section of this label for instructions.) . • Do not graze or feed forage, hay, or straw from treated areas to livestock within 30 days of ETI 114 01 H application. STo.RAGE AND DISPo.SAL Do not contaminate water, food, or feed by storage or disposal. PESTICIDE STo.RAGE: Store product in original container only. Do not contaminate water, other pesticides, fertilizer, food or feed in storage. Store in a cool, dry place. PESTICIDE DISPo.SAL: Do not contaminate water, food, or feed by disposal. Waste resulting from the use of this product may be disposed of on site or at an approved waste disposal facility. Co.NTAINER DISPo.SAL: Triple rinse (or equivalent) empty containers. Then offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill, or by incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of smoke. Co.NDITlo.N o.F SALE AND LlMITATlo.N o.F WARRANTY AND LIABILITY No.TICE: Read the entire Directions for Use and Conditions of Sale and Limitation of Warranty and Liability before buying or using this product. If the terms are not acceptable, return the product at once, unopened, and the purchase price will be refunded. The Directions for Use of this product must be followed carefully. It is impossible to eliminate all'risks inherently associated with the use of this product. Ineffectiveness or other unintended consequences may result because of such factors as manner of use or application, weather, presence of other materials or other influencing factors in the use of the product, which are beyond the control of Etigra or Seller. All such risks shall be assumed by Buyer and User, and Buyer and User agree to hold Etigra and Seller harmless for any claims relating to such factors. Etigra warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes stated in the Directions for Use, subject to the inherent risks referred to above, when used in accordance with the Directions for Use. This warranty does not extend to the use of this product contrary to label instructions, or under conditions not reasonably foreseeable to or beyond the control of Seller or Etigra, and Buyer and User assume the risk of any such use. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, ETIGRA MAKES NO WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR IMPLIED WARRANTY EXCEPT AS STATED ABOVE. To the extent consistent with applicable law, neither Etigra nor Seller shall be liable for any incidental, consequential or special damages resulting from the use or handling of this product. TO. THE EXTENT Co.NSISTENTWITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER o.R BUYER, AND THE EXCLUSIVE LIABILITY o.F ETIGRA AND SELLER Fo.R ANY AND ALL CLAIMS, Lo.SSES, INJURIES o.R DAMAGES (INCLUDING CLAIMS BASED o.N BREACH o.F WARRANTY, Co.NTRACT, NEGLIGENCE, To.RT, STRICT LIABILITY o.R o.THERWISE) RESULTING FRo.M THE USE o.R HANDLING o.F THIS PRo.DUCT, SHALL BE THE RETURN o.F THE PURCHASE PRICE o.F THE PRo.DUCT OR, AT THE ELECTION o.F ETIGRA o.R SELLER, THE REPLACEMENT o.F THE PRo.DUCT. Etigra and Seller offer this product, and Buyer and User accept it, subject to the foregoing Conditions of Sale and Limitation of Warranty and Liability, which may not be modified except by written agreement signed by a duly authorized representative of Etigra. ETI 11401 H is not manufactured or distributed by DuPont, seller of Accent®. Accent® and CINCH® are trademarks of E.1. DuPont de Nemours and Company. AXiom®, Aztec® and Balance® are trademarks of Ba~er CropScience: ' Basagran®, Clarity®, Counter®, Distinct®, Laddok®, Marksman®, Outlook®, Prowl® and Thimet® are trademarks of BASF Ag Products. 15

r' r Beacon·, Callisto·, Dual·, xcee, Force·, Lumax· and Northstar" are trademarks of Syngenta cr~ '6"'/lg Protection, Inc. Fortress® is a trademark of Amvac Chemical Corporation. Harness® is a trademark of Monsanto Technology, LLC Lorsban® and Surpass® are trademarks of Dow AgroSciences, ,LLC Etigra™ is a trademark of Etigra. EPA [approval date] 16