crop-chem-docs/corpus/epa_ppls/264-1024.md

AE 0317309 SE06 HERBICIDE

• EPA Reg No: 264-1024
• Registrant: BAYER CROPSCIENCE, LLC
• Signal word: Caution
• Active ingredients: Pyrasulfotole Technical (4.4%)
• Label accepted: 2011-06-10
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000264-01024-20110610.pdf

---

06 ID UNITED STATES ENVIRONMENTAL PROTECTION AGENCY Washington, D.C. 20460 OFFICE OF CHEMICAL SAFETY AND POLLUTION PREVENTION Laura Phelps Bayer CropScience P.O. Box 12014 Research Triangle Park, NC 27709 Subject: Notification per PR Notice 98-10 (remove patent number) AE 0317309 SE06 Herbicide EPA Reg. No. 264-1024 Application Dated May 20, 2011 Dear Ms. Phelps: The Agency is in receipt of your Application for Pesticide Notification under Pesticide Registration Notice (PRN) 98-10 for the subject product. The Registration Division (RD) has conducted a review of this request finds that the action falls within the scope of PRN 98-10. The label submitted with the application has been date-stamped "Notification" and will be placed in our records. If you have any questions, please contact Mindy Ondish at (703)605-0723 or at ondish.mindy@epa.gov. Sincerely, Kathryn V. Montague Product Manager 23 Herbicide Branch Registration Division (7505P)

flfe Nf butntettan* on mvmnm before completing form. Form Approved. OMB No. 207O-O06O Print Form United States Environmental Protection Agency Washington, DC 2046O Registration Amendment Other OPP Identifier Number Application for Pesticide - Section I

1. Company/Product Number 264-1024
2. Company/Product (Name) AE 0317309 SE06 HERBICIDE
3. EPA Product Manager Ms. Kathryn V. Montague PM* 23
4. Proposed Classification [ | None | | Restricted
5. Name and Address of Applicant (Include ZIP Corf*/ Bayer CropScience LP P. O. Box 12014; 2 T. W. Alexander Dr. Research Trianqle Park, NC 27709
6. Expedited Review. In accordance with FIFRA Section 3(c)(3) (b)(i), my product is similar or identical in composition and labeling to: EPA Reg. No. DCheck if this is a new address Product Name Section - II c I I Amendment - Explain below. I I Resubmlssion in response to Agency letter dated. | I Notification - Explain below. I I Final printed labels in response to ~~* Agency letter dated I I "Me Too" Application. Other - Explain below. Explanation: Use additional page(s) if necessary. (For section I and Section II.) Bayer CropScience is submitting a notification for AE 0317309 SE06 HERBICIDE (EPA Reg No. 264-1024) to remove the patent number from the label and update the EPA's Pesticide Product Label System (PPLS). Section - III
7. Material This Product Wffl Be Packaged hi: Child-Resistant Packaging Yes* No

• Certification must be submitted Unit Packaging BY.. No H "Yes" Unit Packaging wgt. No. per container Water Soluble Packaging Yes No If "Yes- Package wgt No. per container

2. Type of Container Metal Plastic Glass Paper Other (Specify) ( '. Location of Net Content* Information LJ Lebti LJ Container
3. Size(s) Retail Container 5. Location of Label Directions On Label On Labeling accompanying product
4. Manner in Which Label is Affixed to Product Lithograph Paper glued Stenciled [J Other Section - IV
5. Contact Point (Complete /Yams directly below for identification of individual to be contacted, if necessary, to process this application J Name Laura Phelps Title Reg. Affairs Specialist Telephone No. (Include Area Code) Certification I certify that the statements I have made on this form and all attachments thereto are true, accurate and complete. I acknowledge that any knowingly false or misleading statement may be punishable by fine or imprisonment or ( ( both under applicable law. > <. L i
6. Signature \D

5

4. Typed Name Laura Phelps
5. Title Regulatory Affairs Specialist
6. Date May 20,2011
7. Dete Application Received 1 (Stamped) EPA Form 8570-1 (Rev. 8-94) Previous editions are obsolete. White - EPA File Copy (original) ;Y«llou - Applicant Copy

C s f 1 \Bayer CropScience May 20, 2011 Document Processing Desk (MOTIF) Registration Division (7505P) Office of Pesticide Programs U.S. Environmental Protection Agency One Potomac Yard (South Building) 2777 S. Crystal Drive Arlington, VA 22202 ATTN: Ms. Kathryn V. Montague, RD Team 23 Subject: AE 0317309 SE06 HERBICIDE, EPA Registration. No. 264-1024 removal of patent number Dear Ms Montague Bayer CropScience is submitting a notification for AE 0317309 SE06 HERBICIDE to remove the patent number from the label in EPA's PPL database. Enclosed are an EPA Form 8570-1 and a copy of the label for review. Please contact me if you should have further questions Sincerely, Laura Phelps Regulatory Affairs, Herbicides & PGRs Bayer CropScience 2 T. W. Alexander Drive RTF, NC 27709 office: 919-549-2302 mobil:919-352-8075 email: laura.phelps@bayer.com

AE 0317309 SE06 HERBICIDEFOR CONTROL OF CERTAIN BROADLEAF WEEDS IN WHEAT, BARLEY, OATS AND TRITICALE ACTIVE INGREDIENT: Pyrasulfotole (CAS Number 365400-11-9) 4.4% INERT INGREDIENTS: 95.6% TOTAL 100.0% Contains petroleum distillate. E.P.A. Reg. No. 264-1024 E.P.A. Est. No. KEEP OUT OF REACH OF CHILDREN CAUTIONSi listed no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand the label, find someone to explain it to you in detail.) For MEDICAL And TRANSPORTATION Emergencies ONLY Call 24 Hours A Day 1-800-334-7577 For PRODUCT USE Information Call 1-866-99BAYER (1-866-992-2937) FIRST AID IF SWALLOWED: IF ON SKIN: IF IN EYES: • Call a poison control center or doctor immediately for treatment advice. ftB** • Have a person sip a glass of water if able to swallow. IftGt • Do not induce vomiting unless told to by a poison control center or doctor. J||jW Jfl • Do not give any thing to an unconscious person. m 20 • Take off contaminated clothing. • Rinse skin immediately with plenty of water for 1 5-20 minutes. • Call a poison control center or doctor for treatment advice. • Hold eye open and rinse slowly and gently with water for 1 5-20 minutes. • Remove contact lenses, if present, after the first 5 minutes, then continue rinsing. • Call a poison control center or doctor for treatment advice. Note to Physician: May pose an aspiration pneumonia hazard. Contains petroleum distillate. For MEDICAL Emergencies Call 24 Hours A Day 1-800-334-7577. Have the product container or label with you when calling a poison control center or doctor or going for treatment. PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS AND DOMESTIC ANIMALS CAUTION Harmful if absorbed through skin. Harmful if swallowed. Avoid contact with skin, eyes, or clothing. Causes moderate eye irritation. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, or using tobacco. Wear long-sleeved shirt and long pants, socks, shoes, and gloves. Remove and wash contaminated clothing before reuse. Wear protective eyewear (safety glasses).

5 U PERSONAL PROTECTIVE EQUIPMENT (PPE) Some materials that are chemical-resistant to this product are listed below. If you want more options, follow the instructions for category A on an EPA chemical resistance category selection chart. Applicators and other handlers must wear: Long-sleeved shirt and long pants, socks, shoes, chemical resistant gloves such as barrier laminate, butyl rubber > 14 mils, nitrile rubber > 14 mils, or neoprene rubber > 14 mils, and protective eyewear (safety glasses). Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry. ENGINEERING CONTROL STATEMENT When handlers use closed systems, enclosed cabs or aircraft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS. USER SAFETY RECOMMENDATIONS User should: • Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. • Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. • Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing. ENVIRONMENTAL HAZARDS ( Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark. Do not V contaminate any body of water and do not apply when/where conditions could favor runoff. Do not contaminate water when disposing of equipment washwaters or rinsate. Do not allow sprays to drift onto desirable plants. Drift or runoff may adversely affect non-target plants. Ground Water Advisory: Pyrasulfotole is known to leach through soil into ground water under certain conditions as a result of label use. Use of this chemical in areas where soils are permeable, particularly where the water table is shallow, may result in ground-water contamination. Surface Water Advisories: This product may contaminate water through drift of spray in wind. This product has a high potential for runoff for several months or more after application. Poorly draining soils and soils with shallow water tables are more prone to produce runoff that contains this product. A level, well maintained vegetative buffer strip between areas to which this product is applied and surface water features such as ponds, streams, and springs will reduce the potential for contamination of water from rainfall-runoff. Runoff of this product will be reduced by avoiding applications when rainfall is forecasted to occur within 48 hours. DIRECTIONS FOR USE It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Do not use this product until you have read the entire label. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation. AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE), and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours. PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated such as plants, soil or water, is coveralls over long-sleeved shirt and long pants, socks, shoes, chemical resistant gloves such as barrier laminate, butyl rubber > 14 mils, nitrile rubber > 14 mils, or neoprene rubber > 1t4( mils, and protective eye wear. ' '• ; ' *" c.

STORAGE AND DISPOSAL Do not contaminate water, food, or feed by storage and disposal. PESTICIDE STORAGE Store in a cool, dry place. PESTICIDE DISOPSAL Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility. CONTAINER DISPOSAL Empty containers should be triple rinsed (or equivalent), then offer for recycling or reconditioning; or puncture and dispose of in a sanitary landfill, or by incineration; or, if allowed by State and local authorities, by burning. If burned, stay out of smoke. c GENERAL INFORMATION AE 0317309 SE06 is a selective postemergence herbicide for control of important broadleaf weeds in wheat, barley, oats and triticale. ENVIRONMENTAL AND BIOLOGICAL ACTIVITY AE 0317309 SE06 is a postemergent herbicide and best results are obtained when applications are made to young actively growing dicot weeds. AE 0317309 SE06 is primarily absorbed through the foliage and rapidly inhibits pigment synthesis, causing death in susceptible weeds. Thorough spray coverage is important. CROPS AE 0317309 SE06 may be used in wheat, including durum, barley, oats and triticale. APPLICATION TIMING Wheat, Barley, Oats and Triticale Timing Apply AE 0317309 SE06 to actively growing wheat, barley, oats or triticale between 1 leaf and up to flag leaf emergence. Weed Application Timing AE 0317309 SE06 is a postemergent herbicide and best results are obtained when applications are made to young actively growing weeds. See WEED CONTROL RECOMMENDATION CHARTtor appropriate application timing based on weed species and stage of growth. APPLICATION METHODS Ground Application Properly calibrated ground application equipment may be used to apply AE 0317309 SE06 postemergence as a foliar spray. Select spray nozzles that provide best spray distribution and weed coverage at the appropriate spray pressure. Avoid uneven spray distribution, skips, overlaps, and spray drift. Apply 13.7 ounces / acre of AE 0317309 SE06 to labeled crops from fully expanded first true leaf up to flag leaf emergence. Apply the appropriate dosage broadcast in 10 or more gallons of water per acre. For weed control in dense weed canopies, use 15 or more gallons of water per acre. Weed infestations should be treated before they become competitive with the crop. Use nozzles and spray pressure for ground application that deliver medium spray droplets as indicated in the nozzle manufacturer's catalogs such as 80-degree or 110-degree flat-fan nozzles in accordance with ASAE Standard S-572 for optimum spray coverage and canopy penetration. Use screens that are 50 mesh or larger. Do not use flood-jet nozzles or cone nozzles. Nozzle types, nozzle spacings and lower spray pressures that produce coarse spray droplets may not provide adequate coverage of the weeds to ensure optimum control. See the Spray Drift Management section of this label for additional information on proper application of AE 0317309 SE06 herbicide. ( C C 3

1 Aerial Application Calibrate aerial (fixed wing or helicopter) spray equipment prior to use. AE 0317309 SE06 should be applied in a minimum of 5 gallons of water per broadcast acre. Weed infestations should be treated before they become competitive with the crop. To get uniform spray coverage, use nozzles and pressure that deliver medium spray droplets as indicated in nozzle manufacturer's catalogs and in accordance with ASAE standard S-572. DO NOT use raindrop nozzles. Aerial applications with this product should be made at a maximum height of 10 feet above the crop with low drift nozzles. Avoid application under conditions where uniform coverage cannot be obtained or where excessive spray drift may occur. Flagmen and loaders should avoid inhalation of spray mist and prolonged contact with skin. See the Spray Drift Management section of this label for additional information on proper application of AE 0317309 SE06. WEED CONTROL RECOMMENDATIONS General Weed List Postemergence application of AE 0317309 SE06 herbicide will control the following broadleaf weeds. For best control, treat young actively growing weeds. Weeds growing under adverse environmental conditions such as drought will be less susceptible to AE 0317309 SE06 Herbicide. Maximum weed size or stage of growth is listed below. Treat heavy infestations before they become competitive with the crop. Thorough coverage of weeds is necessary to obtain good weed control. WEED CONTROL RECOMMENDATION CHART c ( Weed Species Buckwheat, wild Lambsquarters, common Redroot pigweed Volunteer canola Scientific name Polygonum convolvulus Chenopodium album Amaranthus retroflexus Brassica rapa 13.7 Fluid Ounces per Acre Weed Size 1-6 leaf 1-6 leaf 1-6 leaf 1 - 6 leaf TANK MIX RECOMMENDATIONS Compatibility Testing With Tank Mix Partners If AE 0317309 SE06 herbicide is to be tank mixed with other pesticides, compatibility should be tested prior to mixing. To test for compatibility, use a small container and mix a small amount (0.5 to 1 qt) of spray, combining all ingredients in the same ratio as the anticipated use. If any indications of physical incompatibility develop, do not use this mixture for spraying. Indications of incompatibility usually will appear within 5-15 minutes after mixing. Read and follow the label of each tank-mix product used for precautionary statements, directions for use, geographic and other restrictions. Tank Mixtures For Insect Control AE 0317309 SE06 herbicide may be tank mixed with Baythroid®, Baythroid®XL, Furadan® 4F, Sevin® XLR PLUS, Mustang Max or Warrior® insecticides providing proper timing for insect and weed control are the same. Tank Mixtures For Disease Control Fungicides such as Absolute, Benlate®, Headline, mancozeb (Dithane F-45®; Manzate® 75DF; Penncozeb® 75DF), Prosaro, Tilt®, Stratego® or Topsin® M can be tank mixed with AE 0317309 SE06 herbicide when timing for application of each tank mix partner is the same for the use site.

u c Tank Mixtures For Weed Control AE 0317309 SE06 is a very broad spectrum dicot herbicide. In certain weed control situations, it may be advantageous to tank mix AE 0317309 SE06 with the herbicides listed below to provide expanded weed control. When tank mixing, read and follow the precautionary statements, directions for use, weeds controlled, geographic, and other restrictions on the labeling of each tank mix partner used. AE 0317309 SE06 herbicide may only be tank mixed with the grass herbicides listed on this label. Use in accordance with the most restrictive label limitations and precautions. Herbicides Grass Herbicides Puma58 Rimfire™ Silverado™ Osprey™ Olympus ™ Olympus Flex™ Axial™ Avenge"5 Assert'8' Achieve® SC Discover® NG Maverick® Broadieaf Herbicides Bronate Advanced™ * Buctril®* MCP ester/ MCP amine ** Ally® /Ally Extra® Affinity Tankmix™ Aim™ Express® Harmony® Extra XP Harmony® Starane® Stinger® WideMatch 2,4-D *Equivalent bromoxynil products may be substituted in a tank mix for these products. "Various formulations of MCP may be used at a rate of 0.25 - 0.375 Ib a.i. / A of MCP ester or amine. MIXING INSTRUCTIONS AE 0317309 SE06 must be applied with clean and properly calibrated equipment. Prior to adding AE 0317309 SE06 to the spray tank, ensure that the spray tank, filters and nozzles have been thoroughly cleaned. In-line strainers and nozzle screens should be 50 mesh or coarser. 1 . Fill the spray tank 1/4 to 1/2 full with clean water and begin agitation or bypass. 2. Add the appropriate rate of AE 0317309 SE06 directly to the spray tank. Maintain sufficient agitation during both mixing and application. 3. Add a recommended herbicide, if desired. 4. Add surfactant if desired. 5. Fill the spray tank with balance of water needed. 6. Continue agitation during AE 0317309 SE06 application to ensure uniform spray coverage. C TANK CLEANUP PROCEDURE 1 . Drain the tank completely, and then wash out tank, boom and hoses with clean water. Drain again. Half fill the tank with clean water and add ammonia (i.e., 3% domestic ammonia solution) at a dilution rate of 1% (i.e., 1 gallon of2. 3. 4. 5. 6. domestic ammonia for every 100 gallons of rinsate). Complete filling of the tank with water. Agitate/recirculate and flush through boom and hoses. Leave agitation on for 10 minutes. Drain tank completely. Repeat step 2. Remove nozzles and screens and soak them in a 1 % ammonia solution. Inspect nozzles and screens and remove visible residues. Flush tank, boom, and hoses with clean water. Inspect tank for visible residues. If present, repeat step 2. SPRAY DRIFT MANAGEMENT t (t( L I' L "- ( AE 0317309 SE06 is not volatile. Damage to sensitive crops can occur as a result of spray drift. Spray,; arjft can be managed by several application factors and by spraying under the appropriate climatic conditions. Consequently, avoidance of spray drift is the responsibility of the'applicator and grower. , ( ,. , ( c <- ^ .. SENSITIVE AREAS: The pesticide should only be applied when the potential for drift to adjacent sensltivetareas'(e.g.,'residential areas, bodies of water, known habitats for threatened or endangered species, non-target crops) is minimal (e'.'g., when wfiiici 'is blowing away from the sensitive areas). ''' <.'c t ' 'c L

Ill c c. Avoiding spray drift at the application site is the responsibility of the applicator and grower. The interaction of many equipment-and- weather-related factors determine the potential for spray drift. The applicator and the grower are responsible for considering all these factors when making decisions. Do not apply under circumstances where possible drift to unprotected persons or to food, forage, or other plantings that might be damaged or crops thereof rendered unfit for sale, use or consumption can occur. The following drift management requirements must be followed to avoid off-target drift movement from aerial applications to agricultural field crops.

1. The distance of the outer most nozzles on the boom must not exceed 3/4 the length of the wingspan.
2. Nozzles must always point backward parallel with the air stream and never be pointed downwards more than 45 degrees.
3. All ground application equipment must be properly maintained and calibrated using appropriate carriers. Where states have more stringent regulations, they shall be observed. INFORMATION ON DROPLET SIZE: The best drift management strategy is to apply the largest droplets that provide sufficient coverage and control. Applying larger droplets reduces drift potential, but will not prevent drift if applications are made improperly, or under unfavorable environmental conditions (see Wind, Temperature and Humidity, and Temperature Inversions below). Uniform, thorough spray coverage is important to achieve consistent weed control. Select nozzles and pressure that deliver medium spray droplets as indicated in nozzle manufacturer's catalogs and in accordance with ASAE Standard S-572. Nozzles that deliver coarse spray droplets may be used to reduce spray drift provided spray volume per acre (GPA) is increased to maintain coverage of weeds. CONTROLLING DROPLET SIZE: • Volume - Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with higher rated flows produce larger droplets. • Pressure - Do not exceed the nozzle manufacturer's recommended pressures. For many nozzle types lower pressure produces larger droplets. When higher flow rates are needed, use higher flow rate nozzles instead of increasing pressure. • Number of nozzles - Use the minimum number of nozzles that provide uniform coverage. • Nozzle Orientation - Orienting nozzles so that the spray is released parallel to the airstream produces larger droplets than other orientations and is the recommended practice. Significant deflection from horizontal will reduce droplet size and increase drift potential. • Nozzle Type - Use a nozzle type that is designed for the intended application. With most nozzle types, narrower spray angles produce larger droplets. Consider using low-drift nozzles. Solid stream nozzles oriented straight back produce the largest droplets and the lowest drift. BOOM LENGTH: For some use patterns, reducing the effective boom length to less than 3/4 of the wingspan may further reduce drift without reducing swath width. APPLICATION HEIGHT: For ground boom applications, apply with nozzle height no more than 4 feet above the ground or crop canopy. Making applications at the lowest height that is safe reduces exposure of droplets to evaporation and wind. WIND: Drift potential is lowest between wind speeds of 2 - 10 mph. However, many factors, including droplet size and equipment type determine drift potential at any given speed. Application should be avoided below 2 mph due to variable wind direction and high inversion potential. NOTE: Local terrain can influence wind patterns. Every applicator should be familiar with local wind patterns and how they affect spray drift. For all non-aerial applications, wind speed must be measured adjacent to the application site, on the upwind side, immediately prior to application. TEMPERATURE AND HUMIDITY: When making applications in low relative humidity, set up equipment to produce larger droplets to compensate for evaporation. Droplet evaporation is most severe when conditions are both hot and dry. Avoid spraying during conditions of low humidity and/or high temperatures. TEMPERATURE INVERSIONS: , - < ; Do not make ground applications into areas of temperature inversions because drift potential is high. Temrjarature inversions restrict vertical air mixing, which causes small suspended droplets to remain in a concentrated cloud. This cloud can-move in unpredictable directions due to the light variable winds common during inversions. Temperature inversions are; characterize*)1 hy increasing temperatures with altitude and are common on nights with limited cloud cover and light to no wind. They beginSo form astf.e sun sets and often continue into the morning. Their presence can be indicated by ground fog; however, if fog is not pie'sent, inversions can also be identified by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that hyfer^s and mores laterally in <. i11 1.1 i. 1 i'• < -'. I. I c ' 6

C a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing. CROP ROTATION GUIDELINES AE 0317309 SE06 breakdown in the soil is due mainly to microbial action. Under adverse conditions such as cold and drought, degradation may be slowed. When considering crop rotations, soil moisture and soil temperature conditions after application should be monitored. Follow the crops and replanting interval which appear on this label • 7 Days: Wheat (spring, durum, winter) and spring barley • 4 Months: Soybeans • 9 Months: Alfalfa, canaryseed, canola, corn, flax, field peas, lentils and tame oats • 12 Months: Mustards Where a crop is not specified, conduct a field bioassay as described in "FIELD BIOASSAY" section of this label. FIELD BIOASSAY A field bioassay must be conducted for crops not listed on this label. To conduct a field bioassay, plant strips of the crop you want to grow the season following AE 0317309 SE06 application. Monitor the crop for response to AE 0317309 SE06 to determine if the crop can be grown safely in previously treated AE 0317309 SE06 areas. WEED RESISTANCE AE 0317309 SE06 contains an active ingredient which inhibits the HPPD enzyme system in susceptible plants. Repeated use of herbicides with the same mode of action allows resistant weeds to spread. To manage the spread of resistant weed populations, use herbicides with different modes of action in tankmixture, rotation, or in conjunction with alternate cultural practices. PRECAUTIONS FOR USE • Do not apply to crops undersown with legume species. • Rainfall within 1 hour may result in reduced weed control. • Do not make more than one application of AE 0317309 SE06 per season. • Do not apply more than 13.7 fluid oz/A of AE 0317309 SE06 (0.045 Ib ai/A) per season. DO NOT graze the treated crops or cut for forage or hay within 25 days of application. DO NOT harvest wheat or triticale for grain or straw within 50 days of application. DO NOT harvest barley or oats for grain or straw within 45 days of application. V < I. t 7

It IMPORTANT: READ BEFORE USE Read the entire Directions for Use, Conditions, Disclaimer of Warranties and Limitations of Liability before using this product. If terms are not acceptable, return the unopened product container at once. By using this product, user or buyer accepts the following Conditions, Disclaimer of Warranties and Limitations of Liability. CONDITIONS: The directions for use of this product are believed to be adequate and must be followed carefully. However, it is impossible to eliminate all risks associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences may result because of such factors as weather conditions, presence of other materials, or the manner of use or application, all of which are beyond the control of Bayer CropScience. All such risks shall be assumed by the user or buyer. DISCLAIMER OF WARRANTIES: TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BAYER CROPSCIENCE MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, THAT EXTEND BEYOND THE STATEMENTS MADE ON THIS LABEL. No agent of Bayer CropScience is authorized to make any warranties beyond those contained herein or to modify the warranties contained herein. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BAYER CROPSCIENCE DISCLAIMS ANY LIABILITY WHATSOEVER FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT. LIMITATIONS OF LIABILITY: TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER OR BUYER FOR ANY AND ALL LOSSES, INJURIES OR DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, WHETHER IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, SHALL NOT EXCEED THE PURCHASE PRICE PAID, OR AT BAYER CROPSCIENCE'S ELECTION, THE REPLACEMENT OF PRODUCT. Absolute, Bronate Advanced, Osprey, Olympus, Prosaro, Rimfire and Silverado are trademarks of Bayer. Baythroid, Baythroid XLT, Buctril, Puma, Stratego, and Sevin are registered trademarks of Bayer. Avenge, Assert and Headline are registered trademarks of BASF Corporation. Ally, Ally Extra, Affinity Tankmix, Benlate, Express, Harmony Extra XP and Harmony are registered trademarks of E.I. DuPont de Nemours Company. Penncozeb and Topsin are registered trademarks of Cerexagri, Inc. Dithane F-45, Starane, Stinger and WideMatch are trademarks of Dow AgroSciences LLC. Achieve, Axial, Discover, Tilt, and Warrior are registered trademarks of Syngenta Crop Protection, Inc. Maverick is a registered trademark of Monsanto. Manzate 75DF is a registered trademark of Griffin. Furadan is a registered trademark of FMC Corporation. Mustang MAX is a trademark of FMC Corporation. NET CONTENTS: Various Sizes Produced For (BAYER) Bayer CropScience Bayer CropScience LP P.O. Box 12014, 2 T.W. Alexander Drive Research Triangle Park, North Carolina 27709 1-866-99BAYER (1-866-992-2937) AE 0317309 SE06 Herbicide (MASTER) EPA APPROVED 8/09/07, Notification 05/19/2011