crop-chem-docs/corpus/epa_ppls/7969-279.md

VERDICT POWERED BY KIXOR HERBICIDE

• EPA Reg No: 7969-279
• Registrant: BASF AGRICULTURAL SOLUTIONS US, LLC
• Signal word: Warning
• Active ingredients: Saflufenacil (6.24%); dimethenamid-P (55.04%)
• Label accepted: 2018-05-04
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/007969-00279-20180504.pdf

---

UNITED STATES ENVIRONMENTAL PROTECTION AGENCY WASHINGTON, DC 20460

Fast Track Label Acceptable v.20150320 OFFICE OF CHEMICAL SAFETY AND POLLUTION PREVENTION

May 4, 2018

Craig Kleppe Product Registration Manager BASF Corporation 26 Davis Drive, PO Box 13528 Research Triangle Park, NC 27709

Subject: Label Amendment – Revised Master Label Product Name: Verdict Powered by Kixor Herbicide EPA Registration Number: 7969-279 Application Date: September 1, 2017 Decision Number: 533090

Dear Dr. Kleppe:

The amended label referred to above, submitted in connection with registration under the Federal Insecticide, Fungicide and Rodenticide Act, as amended, is acceptable. This approval does not affect any conditions that were previously imposed on this registration. You continue to be subject to existing conditions on your registration and any deadlines connected with them.

A stamped copy of your labeling is enclosed for your records. This labeling supersedes all previously accepted labeling. You must submit one copy of the final printed labeling before you release the product for shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may distribute or sell this product under the previously approved labeling for 18 months from the date of this letter. After 18 months, you may only distribute or sell this product if it bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3.

Should you wish to add/retain a reference to the company’s website on your label, then please be aware that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims made on the website may not substantially differ from those claims approved through the registration process. Therefore, should the Agency find or if it is brought to our attention that a website contains false or misleading statements or claims substantially differing from the EPA approved registration, the website will be referred to the EPA’s Office of Enforcement and Compliance.

Page 2 of 2 EPA Reg. No. 7969-279 Decision No. 533090

Your release for shipment of the product constitutes acceptance of these conditions. If these conditions are not complied with, the registration will be subject to cancellation in accordance with FIFRA section 6. If you have any questions, please contact me by phone at 703-305-7356, or via email at baris.reuben@epa.gov.

Enclosure

Sincerely,

Reuben Baris, Product Manager 25 Herbicide Branch Registration Division (7505P) Office of Pesticide Programs

For use in field corn (grain, seed, silage), popcorn, processing sweet corn, grain sorghum, and soybean Active Ingredients*: saflufenacil: N'-[2-chloro-4-fluoro-5-(3-methyl-2,6-dioxo-4-(trifluoromethyl)-3, 6-dihydro-1(2H)-pyrimidinyl)benzoyl]-N-isopropyl-N-methylsulfamide . . . . . . . 6.24% dimethenamid-P: (S)-(2-chloro-N-[(1-methyl-2-methoxy)ethyl]-N- (2,4-dimethyl-thien-3-yl)-acetamide) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55.04% Other Ingredients**: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38.72% Total: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100.00% *Contains 0.57 pound of saflufenacil and 5.0 pounds of dimethenamid-P per gallon, formulated as an emulsifiable concentrate ** Contains petroleum distillates EPA Reg. No. 7969-279 EPA Est. No. KEEP OUT OF REACH OF CHILDREN WARNING/AVISO See inside for complete First Aid, Precautionary Statements, Directions For Use, Conditions of Sale and Warranty, and state-specific crop and/or use site restrictions. In case of an emergency endangering life or property involving this product, call day or night 1-800-832-HELP (4357). Net Contents: BASF Corporation 26 Davis Drive, Research Triangle Park, NC 27709 Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand the label, find someone to explain it to you in detail.) Saflufenacil Group 14 HerbicideDimethenamid-P 15 05/04/2018 7969-279

Precautionary Statements Hazards to Humans and Domestic Animals WARNING. Causes substantial but temporary eye injury. Harmful if swallowed. DO NOT get in eyes or on clothing. Avoid contact with skin. Prolonged or frequently repeated skin contact may cause allergic reactions in some individuals. Personal Protective Equipment (PPE) Applicators and other handlers must wear: • Long-sleeved shirt and long pants • Shoes plus socks • Chemical-resistant gloves made of barrier laminate, butyl rubber ≥ 14 mils, or nitrile rubber ≥ 14 mils. Replace gloves after 8 hours of use (either continuous or intermit- tent). Thoroughly rinse gloves with water between intermittent uses. • Protective eyewear (face shield, goggles, or safety glasses) Follow the manufacturer’s instructions for cleaning and maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry. Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product’s concentrate. DO NOT reuse them. Engineering Controls When handlers use closed systems, enclosed cabs, or air- craft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS. IMPORTANT:When reduced PPE is worn because a closed system is being used, handlers must be provided all PPE specified above for applicators and other handlers and have such PPE immediately available for use in an emergency, including a spill or equipment breakdown. Environmental Hazards For terrestrial uses, DO NOT apply directly to water, areas where surface water is present, or intertidal areas below the mean high water mark. DO NOT contaminate water when disposing of equipment washwater or rinsate. Groundwater Advisory. Saflufenacil has properties and characteristics associated with chemicals detected in groundwater. This chemical may leach into groundwater if used in areas where soils are permeable, particularly where the water table is shallow. Dimethenamid-P has properties that may result in groundwater contamination. Application in areas where soils are permeable or coarse and ground- water is near the surface could result in groundwater contamination. Surface Water Advisory. This product may impact sur- face water due to runoff of rainwater. This is especially true USER SAFETY RECOMMENDATIONS Users should: • Wash hands thoroughly with soap and water after han- dling and before eating, drinking, chewing gum, using tobacco, or using the toilet. • Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. • Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing. 2 FIRST AID If in eyes • Hold eyes open and rinse slowly and gently with water for 15 to 20 minutes. • Remove contact lenses, if present, after the first 5 minutes; then continue rinsing. • Call a poison control center for treatment advice. If swallowed • Call a poison control center or doctor immediately for treatment advice. • DO NOT induce vomiting unless told to by a poison control center or doctor. • DO NOT give any liquid to the person. • DO NOT give anything to an unconscious person. If on skin • Take off contaminated clothing. • Rinse skin immediately with plenty of water for 15 to 20 minutes. • Call a poison control center or doctor for treatment advice. If inhaled • Move person to fresh air. • If person is not breathing, call 911 or an ambulance; then give artificial respiration, preferably by mouth to mouth, if possible. • Call a poison control center or doctor for further treatment advice. HOTLINE NUMBER Have the product container or label with you when calling a poison control center or doctor or going for treatment. You may also contact BASF Corporation for emergency medical treatment information: 1-800-832-HELP (4357). Note to Physician: Contains petroleum distillate. Vomiting may cause aspiration pneumonia.

for poorly draining soils and soils with shallow groundwater. This product is classified as having high potential for reach- ing surface water via runoff for several weeks after application. A level, well-maintained buffer strip between areas to which this product is applied and surface water features including ponds, streams, and springs will reduce the potential loading of this chemical from runoff water and sediment. Runoff of this product will be reduced by avoid- ing application when rainfall is forecast to occur within 48 hours. Point-source Contamination. To prevent point-source contamination, DO NOT mix or load this or any other pes- ticide product within 50 feet of wells (including abandoned wells and drainage wells), sinkholes, perennial or intermit- tent streams and rivers, and natural or impounded lakes and reservoirs. This setback does not apply to properly capped or plugged abandoned wells and does not apply to impervious pad or dike mixing/loading areas described as follows. Mixing, loading, rinsing, or washing operations performed within 50 feet of a well are allowed only when conducted on an impervious pad constructed to withstand the weight of the heaviest load that may be on or move across the pad. The pad must be self-contained to prevent surface water flow over or from the pad. The pad capacity must be maintained at 110% that of the largest pesticide container or application equipment used on the pad and have suffi- cient capacity to contain all product spills, equipment or container leaks, equipment washwater, and rainwater that may fall on the pad. The containment capacity does not apply to vehicles delivering pesticide shipments to the mix- ing and/or loading site. States may have in effect additional requirements regarding wellhead setbacks and operational containment. Care must be taken when using this product to prevent: • Back-siphoning into wells • Spills • Improper disposal of excess pesticide, spray mixes, or rinsates Check valves or anti-siphoning devices must be used on all mixing equipment. Movement Dissolved in Runoff or Through Soil. DO NOT apply under conditions that favor runoff. DO NOT apply to impervious substrates including paved or highly compacted surfaces or frozen soils. Groundwater contamination may occur in areas where soils are perme- able or coarse and groundwater is near the surface. To minimize the possibility of groundwater contamination, carefully follow application rate specifications as affected by soil type in the Application Instructions section of this label. DO NOT apply if all 3 criteria exist:

1. Coarse soils classified as sand (does not include loamy sand or sandy loam)
2. Less than 3% organic matter (as determined by soil tests, if not known)
3. Where depth to groundwater is 30 feet or less Movement by Water Erosion of Treated Soil. DO NOT apply or incorporate this product by flood or furrow irriga- tion. Ensure treated areas have received at least 1/2 inch of rainfall before using tailwater for subsequent irrigation of other fields. Endangered Species Protection Requirements This product may have effects on federally listed threatened or endangered plant species or their critical habitat. When using this product, you must follow the mea- sures contained in the Endangered Species Protection Bulletin for the county or parish in which you are applying the pesticide. To determine whether your county or parish has a Bulletin, and to obtain that Bulletin, consult http://www.epa.gov/espp/, or call 1-844-447-3813 no more than 6 months before using this product. Applicators must use Bulletins that are in effect in the month in which the pesticide will be applied. New Bulletins will generally be available from the above sources 6 months before their effective dates. Directions For Use It is a violation of federal law to use this product in a man- ner inconsistent with its labeling. This label must be in the possession of the user at time of herbicide application. DO NOT apply this product in a way that will contact work- ers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your state or tribe, consult the agency responsible for pesticide regulation. Observe all restrictions and precautions in this label and the labels of products used in combination with Verdict ® herbicide. The use of Verdict not consistent with this label can result in injury to crops, animals, or persons. Keep containers closed to avoid spills and contamination. Unless otherwise directed in supplemental labeling, all applicable directions, restrictions, precautions, and Conditions of Sale and Warranty are to be followed. BASF Corporation does not recommend or authorize the use of this product in manufacturing, processing, or preparing custom blends with other products for applica- tion in crops. 3

(continued) AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. This standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notifi- cation, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equip- ment (PPE) and restricted-entry interval. The requirements in this box only apply to uses of this product that are cov- ered by the Worker Protection Standard. DO NOT enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 12 hours. EXCEPTION: If the product is soil injected or soil incor- porated, the Worker Protection Standard, under certain circumstances, allows workers to enter the treated area if there will be no contact with anything that has been treated. PPE required for early entry to treated areas that is per - mitted under the Worker Protection Standard and that involves contact with anything that has been treated, including plants, soil, or water, is: • Coveralls • Chemical-resistant gloves made of barrier laminate, butyl rubber ≥ 14 mils, nitrile rubber ≥ 14 mils • Shoes plus socks • Protective eyewear STORAGE AND DISPOSAL DO NOT contaminate water, food, or feed by storage or disposal. Open dumping is prohibited. Pesticide Storage DO NOT use or store near heat or open flame. Store in original container in a well ventilated area separately from fertilizer, feed, or foodstuffs and away from other pesticides. Avoid cross-contamination with other pesticides. Groundwater contamination may be reduced by diking and flooring of permanent liquid bulk storage sites with an impermeable material. Pesticide Disposal Wastes resulting from this product must be disposed of on-site or at an approved waste disposal facility. Improper disposal of excess pesticide, spray mix, or rinsate is a vio- lation of federal law. If these wastes cannot be disposed of according to label instructions, contact the state agency responsible for pesticide regulation or the Hazardous Waste representative at the nearest EPA Regional Office for guidance. Container Handling Nonrefillable Container. DO NOT reuse or refill this container. Triple rinse or pressure rinse container (or equivalent) promptly after emptying; then offer for recycling, if available, or reconditioning, if appropriate, or puncture and dispose of in a sanitary landfill, or by inciner- ation, or by other procedures approved by state and local authorities. Triple rinse containers small enough to shake (capacity ≤ 5 gallons) as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 sec- onds. Pour rinsate into application equipment or a mix tank, or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this pro- cedure two more times. Triple rinse containers too large to shake (capacity > 5 gallons) as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container 1/4 full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into application equipment or a mix tank, or store rinsate for later use or disposal. Repeat this proce- dure two more times. 4

In Case of Emergency In case of large-scale spill of this product, call: • CHEMTREC 1-800-424-9300 • BASF Corporation 1-800-832-HELP (4357) In case of medical emergency regarding this product, call: • Your local doctor for immediate treatment • Your local poison control center (hospital) • BASF Corporation 1-800-832-HELP (4357) Steps to take if material is released or spilled: • Dike and contain the spill with inert material (sand, earth, etc.) and transfer liquid and solid diking material to sepa- rate containers for disposal. • Remove contaminated clothing and wash affected skin areas with soap and water. • Wash clothing before reuse. • Keep the spill out of all sewers and open bodies of water. Product Information Verdict® herbicide is a selective residual preemergence herbicide for controlling most annual grass weeds, annual broadleaf weeds, and sedges in field corn, popcorn, pro- cessing sweet corn, grain sorghum, and soybean (refer to Table 1 for a list of weeds controlled preemergence). Residual preemergence application of Verdict must be activated by at least 1/2 inch of rainfall or sprinkler irrigation before weed seedling emergence. When Verdict is not activated, a labeled postemergence herbicide or cultivation may be needed to control weed escapes. Verdict also provides contact burndown of many broadleaf weeds (refer to Table 2 for a list of weeds controlled by a burndown application). An adjuvant (refer to Additives section for details) is required with Verdict for optimum broadleaf burndown activity. Burndown application of Verdict should be made when broadleaf weeds are small and actively growing. Burndown activity may be slowed or reduced under cloudy and/or foggy or cooler weather con- ditions, or when weeds are growing under drought or other stress conditions. When targeting dense weed populations and/or larger broadleaf weeds, use a higher application rate within an application rate range and/or higher spray volumes. Angling nozzles forward (to 45 degrees) may improve penetration of denser weed canopies. Tank mixes with contact herbicides (e.g. carfentrazone, paraquat) may reduce the burndown activity of Verdict. STORAGE AND DISPOSAL (continued) Container Handling (continued) Pressure rinse as follows: Empty the remaining contents into application equipment or mix tank and con- tinue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank, or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. Refillable Container. Refill this container with pesticide only. DO NOT reuse this container for any other purpose. Triple rinsing the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility of the refiller. Triple rinse as follows: To clean the container before final disposal, empty the remaining contents from this container into application equipment or mix tank. Fill the container about 10% full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collec- tion system. Repeat this rinsing procedure two more times. When this container is empty, replace the cap and seal all openings that have been opened during use; return the container to the point of purchase or to a designated location. This container must only be refilled with a pesti- cide product. Prior to refilling, inspect carefully for damage including cracks, punctures, abrasions, worn out threads and closure devices. Check for leaks after refilling and before transport. DO NOT transport if this container is damaged or leaking. If the container is damaged, or leak- ing, or obsolete and not returned to the point of purchase or to a designated location, triple rinse emptied container and offer for recycling, if available, or dispose of container in compliance with state and local regulations. 5

Table 1. Weeds Controlled by a Residual Preemergence Application of Verdict® herbicide (continued) Common Name Scientific Name C = Control S = Suppression1 Annual Broadleaf Weeds Amaranth, Palmer Amaranthus palmeri C Amaranth, Powell Amaranthus powellii C Beggarweed, Florida Desmodium tortuosum C Buckwheat, wild Polygonum convolvulus C Buffalobur Solanum rostratum C Burcucumber Sicyos angulatus S Canola, volunteer (rapeseed), all types Brassica spp. C Carpetweed Mollugo verticillata C Chamomile, mayweed Anthemis cotula C Chickweed, common Stellaria media C Cocklebur, common Xanthium strumarium C Copperleaf, Virginia Acalypha virginica C Devil’s-claw Proboscidea louisiana S Eclipta Eclipta prostrata S Fleabane, hairy Conyza bonariensis C Galinsoga, smallflower Galinsoga parviflora C Groundcherry, cutleaf Physalis angulata C Horseweed (marestail) Conyza canadensis C Jimsonweed Datura stramonium C Kochia Kochia scoparia C Ladysthumb Polygonum persicaria C Lambsquarters, common Chenopodium album C Mallow, Venice Hibiscus trionum C Marestail (horseweed) Conyza canadensis C Morningglory, entireleaf Ipomoea hederacea var. integriuscula C Morningglory, ivyleaf Ipomoea hederacea C Morningglory, palmleaf Ipomoea wrightii C Morningglory, pitted Ipomoea lacunosa C Morningglory, tall Ipomoea purpurea C Mustard, wild Sinapis arvensis C Nightshade, black Solanum nigrum C Nightshade, cutleaf Solanum triflorum C Nightshade, Eastern black Solanum ptycanthum C Nightshade, hairy Solanum sarrachoides C Pennycress, field Thlaspi arvense C Pigweed, prostrate Amaranthus blitoides C Pigweed, redroot Amaranthus retroflexus C Pigweed, smooth Amaranthus hybridus C Pigweed, tumble Amaranthus albus C Puncturevine Tribulus terrestris S Purslane, common Portulaca oleracea C 6

Table 1. Weeds Controlled by a Residual Preemergence Application of Verdict® herbicide (continued) 1 To complement control, Verdict should be used in tank mixes or sequential applications with other labeled herbicides that provide additional control of noted weeds. Common Name Scientific Name C = Control S = Suppression1 Annual Broadleaf Weeds (continued) Pusley, Florida Richardia scabra C Ragweed, common Ambrosia artemisiifolia C Ragweed, giant Ambrosia trifida C Sida, prickly Sida spinosa C Smartweed, Pennsylvania Polygonum pensylvanicum C Sowthistle, annual Sonchus arvensis C Spurge, nodding Chamaesyce nutans C Spurge, spotted Chamaesyce maculata C Starbur, bristly Acanthospermum hispidum C Sunflower, common Helianthus annuus C Thistle, Russian Salsola kali C Velvetleaf Abutilon theophrasti C Waterhemp Amaranthus tuberculatus C Annual Grass Weeds Barnyardgrass Echinochloa crus-galli C Bluegrass, annual Poa annua C Bluegrass, roughstalk Poa trivialis C Brome, California Bromus carinatus C Brome, downy Bromus tectorum C Crabgrass, large Digitaria sanguinalis C Crabgrass, smooth Digitaria ischaemum C Cupgrass, Southwestern Eriochloa gracilis C Cupgrass, woolly Eriochloa villosa S Fescue, rattail Vulpia myuros C Foxtail, giant Setaria faberi C Foxtail, green Setaria viridis C Foxtail, yellow Setaria pumila C Goosegrass Eleusine indica C Johnsongrass (seedling) Sorghum halepense S Millet, wild proso Panicum miliaceum S Panicum, fall Panicum dichotomiflorum C Panicum, Texas Panicum texanum S Rice, red Oryza sativa C Ryegrass, Italian Lolium multiflorum C Sandbur Cenchrus spp. S Shattercane Sorghum bicolor S Signalgrass, broadleaf Brachiaria platyphylla S Witchgrass Panicum capillare C Sedges Flatsedge, rice Cyperus iria C Nutsedge, yellow Cyperus esculentus S 7

Table 2. Broadleaf Weeds Controlled by a Burndown Application of Verdict® herbicide (continued) Common Name Scientific Name C = Control S = Suppression Maximum Height or Diameter (inches) Amaranth, Palmer Amaranthus palmeri C 6 Bedstraw, catchweed Galium aparine C 3 Beggarticks, hairy Bidens pilosa C 6 Beggarweed, Florida Desmodium tortuosum C 6 Bindweed, field Convolvulus arvensis S¹ 6 Buckwheat, wild Polygonum convolvulus C 3 Canola, volunteer (rapeseed) Brassica spp. C 6 Carpetweed Mollugo verticillata C 6 Chickweed, common Stellaria media S 3 Cocklebur, common Xanthium strumarium C 6 Cotton, volunteer Gossypium hirsutum C growing from seed, ≤ 6 leaves Cowcockle Vaccaria pyramidata C 4 Dandelion Taraxacum officinale S¹ 6 Eveningprimrose, cutleaf Oenothera laciniata C 4 Falseflax, smallseed Camelina microcarpa C 4 Filaree, broadleaf Erodium botrys C 4 Filaree, redstem Erodium cicutarium S 3 Filaree, whitestem Erodium moschatum C 4 Fleabane, hairy Conyza bonariensis C 6 Flixweed Descurainia sophia C 6 Goosefoot, nettleleaf Chenopodium murale C 3 Groundcherry, cutleaf Physalis angulata C 6 Groundsel, common Senecio vulgaris C 4 Hawksbeard, narrowleaf Crepis tectorum C 6 Hemlock, poison Conium maculatum C 6 Henbit Lamium amplexicaule S 3 Horseweed (marestail) Conyza canadensis C 6 Knotweed, prostrate Polygonum aviculare C 3 Kochia Kochia scoparia C 3 Ladysthumb Polygonum persicaria C 6 Lambsquarters, common Chenopodium album C 6 Lambsquarters, narrowleaf Chenopodium pratericola C 6 Lettuce, miner’s Claytonia perfoliata C 6 Lettuce, prickly Lactuca serriola C 6 Mallow, common Malva neglecta C 6 Mallow, little (cheeseweed) Malva parviflora C 6 Mallow, Venice Hibiscus trionum C 6 Marestail (horseweed) Conyza canadensis C 6 Morningglory, entireleaf Ipomoea hederacea var. integriuscula C 6 Morningglory, ivyleaf Ipomoea hederacea C 6 8

Table 2. Broadleaf Weeds Controlled by a Burndown Application of Verdict® herbicide (continued) 1 Control of seedling stage and suppression of perennial growth stage 2 Populations of noted weeds exist that are known to be resistant to burndown applications of Group 14/Group E herbicides and will not be controlled by herbicides like Verdict. See the Resistance Management section for practices to manage and minimize the impact of resistant weeds (e.g. tank mixes or alternation with other herbicide modes of action, crop rotation, and mechanical control). Common Name Scientific Name C = Control S = Suppression Maximum Height or Diameter (inches) Morningglory, pitted Ipomoea lacunosa C 6 Morningglory, tall Ipomoea purpurea C 6 Mustard, black Brassica nigra C 6 Mustard, tumble Sisymbrium altissimum C 6 Mustard, wild Sinapis arvensis C 6 Nettle, burning Urtica urens C 4 Nightshade, black Solanum nigrum C 6 Nightshade, cutleaf Solanum triflorum C 6 Nightshade, Eastern black Solanum ptycanthum C 6 Nightshade, hairy Solanum saccharoides C 6 Parthenium Parthenium hysterophorus C 6 Pennycress, field Thlaspi arvense C 6 Pigweed, prostrate Amaranthus blitoides C 6 Pigweed, redroot Amaranthus retroflexus C 6 Pigweed, smooth Amaranthus hybridus C 6 Puncturevine Tribulus terrestris C 6 Purslane, common Portulaca oleracea C 3 Pusley, Florida Richardia scabra S 3 Ragweed, common2 Ambrosia artemisiifolia C 6 Ragweed, giant Ambrosia trifida C 6 Rocket, London Sisymbrium irio C 6 Sesbania, hemp Sesbania exaltata C 4 Shepherd’s-purse Capsella bursa-pastoris C 6 Sida, prickly Sida spinosa C 6 Smartweed, Pennsylvania Polygonum pensylvanicum C 6 Sowthistle, annual Sonchus oleraceus C 6 Sowthistle, spiny Sonchus asper C 6 Spurge, garden Chamaesyce hirta C 6 Spurge, prostrate Chamaesyce humistrata C 6 Spurge, spotted Chamaesyce maculata C 6 Sunflower, common Helianthus annuus C 6 Tansymustard, green Descurainia incana C 6 Tansymustard, pinnate Descurainia pinnata C 6 Thistle, Canada Cirsium arvense S¹ 6 Thistle, Russian Salsola kali C 3 Velvetleaf Abutilon theophrasti C 6 Waterhemp2 Amaranthus tuberculatus C 6 Willowweed Epilobium adenocaulon C 3 9

Mode of Action Verdict® herbicide combines two active ingredients: saflufenacil, a potent inhibitor of protoporphyrinogen- oxidase belonging to herbicide mode-of-action Group 14 (WSSA)/Group E (HRAC), and dimethenamid-P , a chloroacetamide belonging to the herbicide mode-of-action Group 15/Group K 3. Saflufenacil is rapidly absorbed by roots and foliage. Following inhibition of the protoporphyrinogen-oxidase, plant death is the result of membrane damage. Under active growing conditions, sus- ceptible emerging weed seedlings usually develop chlorotic and necrotic injury symptoms within hours and die within a few days. Susceptible germinating weed seeds usually die as they reach the soil surface or shortly after emergence. Dimethenamid-P is a root-and-shoot inhibitor that controls susceptible weed seedlings before or soon after they emerge from the soil. Herbicide Resistance Management While weed resistance to protoporphyrinogen-oxidase - inhibiting herbicides is relatively infrequent, populations of resistant biotypes are known to exist. Resistance manage- ment should be part of a diversified weed control strategy that integrates chemical, cultural, and mechanical (tillage) control tactics. Cultural control tactics include crop rotation, proper fertilizer placement, and optimum seeding rate/row spacing. Consult your local BASF representative, state cooperative extension service, professional consultants, or other qualified authority to determine appropriate actions if you suspect resistant weeds. Herbicide resistance manage- ment practices should be considered and include: Chemical Control

1. Start clean with tillage or an effective burndown herbi- cide program.
2. DO NOT rely on a single herbicide site of action for weed control.
3. Follow labeled application rate and weed growth stage specifications.
4. Avoid application of herbicides with the same site of action more than twice a season.
5. Use tank mixes and sequential applications with other herbicides possessing different sites of action that are also effective on the target weeds.
6. Use crop rotation so crop competition, tillage, or herbi- cides with alternative modes of action can be used to control weed escapes. Scouting and Containment
7. Scout fields after herbicide application to identify areas where weed control was ineffective.
8. Control weed escapes with herbicides possessing a dif- ferent site of action or use a mechanical control measure. Weed escapes should not be allowed to reproduce by seed or to proliferate vegetatively.
9. Contact your Verdict supplier and/or your local BASF representative to report weed escapes.
10. Clean equipment before moving to a different field to avoid spread of resistant weeds. Proactively implementing diversified weed control strategies to minimize selection for weed populations resistant to one or more herbicides is recommended. Crop Tolerance Field corn, popcorn, processing sweet corn, grain sorghum, and soybean are tolerant to Verdict when applied according to label directions as a preplant to preemergence treatment and under normal environmental conditions. Crop injury may occur under stressful growing conditions (e.g. low soil fertility, seedling disease, extreme hot or cold weather, excessive moisture, high soil pH, high soil salt concentration, or drought). Severe crop injury will result if Verdict is applied postemergence (over the top) to corn, sorghum, or soybean. Application Instructions Verdict may be applied preplant surface, preplant incorpo- rated, or preemergence to field corn, popcorn, processing sweet corn, grain sorghum, and soybean. Apply Verdict only before crop emergence. Rainfastness - Verdict is rainfast 1 hour after application. Burndown activity may be reduced if rain or irrigation occurs within 1 hour of application. Application Rate Application rates of Verdict for residual preemergence weed control may vary depending on soil texture and organic matter. Refer to Table 3 for soil texture groups used in this label. Table 3. Soil Texture Groups Refer to the Crop-specific Information section for spe- cific application directions and the restrictions and precautions by crop use and pattern. Application Methods and Equipment Verdict may be applied by ground or air. Thorough spray coverage is important for optimum weed control and can be improved with proper adjuvant, nozzle, and spray vol- ume selection. Use and configure application equipment to provide an adequate spray volume, an accurate and uniform distribu- tion of spray droplets over the treated area, and to avoid spray drift to nontarget areas. Adjust equipment to main- tain continuous agitation during spraying with good mechanical or bypass agitation. Avoid overlaps that increase rates above the use rates specified in this label. Coarse Medium Fine Sand Loamy sand Sandy loam Silt Silt loam Loam Sandy clay loam Sandy clay Silty clay Silty clay loam Clay loam Clay 10

Verdict® herbicide may be applied using water or sprayable fluid nitrogen fertilizer solutions as the spray car- rier. Additionally, Verdict may be impregnated on and applied with dry bulk fertilizer. Aerial Application Requirements Water Volume. Use 3 or more gallons of water per acre. Applicators must follow these requirements to reduce the potential of spray drift to nontarget areas from aerial applications:

1. The distance of the outermost nozzles on the boom must not exceed 3/4 the length of the fixed wingspan or 90% of rotor blade diameter.
2. Use low-drift nozzles (straight-stream nozzles, D-8 or larger). DO NOT use nozzles producing a mist droplet spray.
3. Nozzles must always point backward parallel with the airstream and never be pointed downward more than 45 degrees.
4. Without compromising aircraft safety, application must be made at a height of 10 feet or less above the crop canopy or tallest plants.
5. DO NOT apply during periods of temperature inversions or stable atmospheric conditions.
6. Avoid potential adverse effects to nontarget areas by maintaining a 120-feet buffer between the point of direct application and the closest downwind edge of sensi- tive terrestrial habitats (grasslands, forested areas, shelter belts, woodlots, hedgerows, riparian areas, shrub lands, and crop lands). Ground Application Requirements Spray Carrier Volume. Use 3 or more gallons of water per acre or 20 or more gallons of sprayable fluid fertilizer per acre. Thorough coverage of existing vegetation is essential for burndown applications and higher spray vol- umes may be necessary for better performance. Applicators must follow these requirements to reduce the potential of spray drift to nontarget areas from ground applications:
7. Apply this product using nozzles that deliver medium- to-coarse spray droplets as defined by ASAE standard S-572 and as shown in nozzle manufacturer’s catalogs. Flat-fan nozzles are recommended for burn- down applications while flood-jet type nozzles are recommended for residual soil surface applications. Nozzles that deliver coarse spray droplets may be used to reduce spray drift provided spray volume per acre (GPA) is increased to maintain coverage of target (i.e. weeds or soil surface). DO NOT use nozzles that produce fine (e.g. cone) spray droplets.
8. Apply this product only when the potential for drift to adjacent nontarget areas is minimal (e.g. when the wind is 10 MPH or less and is blowing away from nontar- get areas). DO NOT apply during periods of temperature inversions or stable atmospheric conditions.
9. Avoid potential adverse effects to nontarget areas by maintaining a 60-feet buffer between the application area and the closest downwind edge of sensitive ter- restrial habitats (grasslands, forested areas, shelter belts, woodlots, hedgerows, riparian areas, shrub lands, and crop lands). Ground Application (dry bulk fertilizer) Verdict may be impregnated or coated onto dry bulk gran- ular fertilizer carriers for residual soil surface application. Impregnation or coating may be conducted by in-plant bulk or on-board systems. Perform the mixing operation in well- ventilated areas. Addition of a drying agent may be necessary if the fertilizer and herbicide blend is too wet for uniform application because of high humidity, high urea concentration, or low fertilizer use rate. Slowly add the drying agent to the blend until a flowable mixture is obtained. Drying agents are not recommended for use with on-board impregnation systems. Under some conditions, fertilizer impregnated with Verdict may clog air tubes or deflector plates on pneumatic appli- cation systems. Mineral oil may be added to Verdict before blending with fertilizer to reduce plugging. DO NOT use drying agents when mineral oil is used. To avoid sepa- ration of Verdict and mineral oil mixes in cold temperatures, keep mixture heated or agitated before blending with fertilizer. Mineral oil may be used at in-plant blending stations or on-board injection systems. Generally, fertilizer application rates of at least 200 lbs to 700 lbs per acre of herbicide and fertilizer blend provide adequate distribution or coverage for Verdict across the soil surface. Apply uniformly to the soil to prevent possible crop injury and offer satisfactory weed control. Impregnat - ed fertilizer spread at 1/2 rate and overlapped for a full rate offer a more uniform distribution. Use shallow (less than 2 inches) incorporation for improved weed control. Deeper incorporation dilutes the herbicide layer near the soil sur- face and may result in unsatisfactory weed control. To calculate the herbicide rate when using dry bulk fertilizer applications: Chemigation Application via Sprinkler Irrigation Systems Verdict may be applied as a chemigation treatment through sprinkler irrigation systems. Apply this product ONLY through a sprinkler irrigation system of the following type: center pivot, end tow, hand move, lateral move, side (wheel) roll, or solid set. DO NOT apply this product through any other type of sprinkler irrigation system. Application may be made alone or in tank mixes with other herbicides on this label registered for use in specified sprin- kler irrigation systems. Application must be made within specific crop stage timings and product use rates given in the container directions for use label. fl ozs herbicide per acre pounds fertilizer per acre X 2000 = fl ozs herbicide per ton of fertilizer 11

Uniform distribution of Verdict® herbicide-treated irrigation water is the sole responsibility of the applicator and is required to avoid crop injury, lack of herbicide effectiveness, or illegal pesticide residues in the crop. For calibration questions, contact State Extension Service spe- cialists, equipment manufacturers, or other experts. Proper calibration is the responsibility of the applicator. The system must be calibrated (with water only) to ensure the amount of Verdict applied corresponds to the specified rate. Apply Verdict in volume minimums of 0.33 to 0.67 inches of water using the lower volume for coarse- texture soils and the higher volume for fine-texture soils. Applications made in high volumes of water (more than 1 inch) may result in reduced weed control. Meter herbicide dilution into irrigation water through the entire time of water application for center pivot and lateral move systems. For solid-set and hand-move irrigation systems, apply Verdict through the system at the begin- ning of the set; then follow with additional water to reach volume minimums as listed by soil type. To increase cali- bration accuracy of injection metering equipment, dilute Verdict in a minimum of 3 parts water to 1 part Verdict. Maintain agitation in injection nurse tanks to keep a uniform herbicide suspension during application. Restrictions for chemigation:

1. DO NOT apply when wind speed favors drift beyond the area intended for treatment.
2. DO NOT connect an irrigation system used for pesticide application to a public water system unless the pesticide label-prescribed safety devices for public water systems are in place.
3. A person knowledgeable of the chemigation system and responsible for its operation, or under the supervision of the responsible person, shall shut the system down and make necessary adjustments should the need arise.
4. Tail water (runoff water) from chemigation that contains Verdict must be recirculated and/or contained in the field in a cistern or holding reservoir from the initial appli- cation and/or used only on adjacent, approved crops for which Verdict is registered for this type of application.
5. The pesticide injection pipeline must contain a function- al, automatic, quick-closing check valve to prevent the flow of fluid back toward the injection pump. It must also contain a functional, normally closed, solenoid-operated valve located on the intake side of the injection pump and connected to the system interlock to prevent fluid from being withdrawn from the supply tank when the irrigation system is either automatically or manually shut down.
6. The sprinkler chemigation system must contain a func- tional check valve, vacuum-relief valve, and low-pressure drain appropriately located on the irrigation pipeline to prevent water-source contamination from backflow. In addition, systems must use a metering pump, like a positive displacement injection pump (e.g. diaphragm pump) effectively designed and constructed of materials compatible with pesticides and capable of being fitted with a system interlock.
7. The sprinkler chemigation system must contain function- al interlocking controls to automatically shut off the pesticide injection pump when the water pump motor stops, or in cases where there is no water pump, when the water pressure decreases to the point where pesti- cide distribution is adversely affected.
8. The irrigation line or water pump must include a functional pressure switch that will stop the water pump motor when the water pressure decreases to the point where pesticide distribution is adversely affected. Chemigation systems connected to public water systems:
9. Public water system means a system for the provision to the public of piped water for human consumption if such system has at least 15 service connections or regularly serves an average of at least 25 individuals daily at least 60 days out of the year.
10. Chemigation systems connected to public water systems must contain a functional, reduced-pressure zone backflow preventer (RPZ) or the functional equiva- lent in the water supply line upstream from the point of pesticide introduction. As an option to the RPZ, the water from the public water system should be discharged into a reservoir tank before pesticide intro- duction. There shall be a complete physical break (air gap) between the outlet end of the fill pipe and the top or overflow rim of the reservoir tank of at least twice the inside diameter of the fill pipe.
11. All chemigation systems connected to public water sys- tems must also follow restrictions listed in the preceding section. Cleaning Spray Equipment Clean application equipment thoroughly by using a strong detergent or commercial sprayer cleaner according to the manufacturer’s directions, followed by triple rinsing the equipment before and after applying this product. Spray Drift Management It is the responsibility of the applicator to avoid spray drift at the application site, especially onto nontarget areas. The interaction of many equipment-related and weather-related factors determines the potential for spray drift. The applica- tor and the grower are responsible for considering all these factors when making decisions. The applicator must be familiar with and take into account the information covered in the following spray drift reduc- tion advisory information. Controlling Droplet Size. The most effective way to reduce drift potential is to apply the largest droplets that provide sufficient coverage and control. Volume. Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with higher rated flows produce larger droplets. Pressure. DO NOT exceed the nozzle manufacturer’s specified pressures. For many nozzle types, lower pressure produces larger droplets. When higher flow rates are 12

needed, use higher flow rate nozzles instead of increasing pressure. Number of Nozzles. Use the minimum number of nozzles that provide uniform coverage. Nozzle Type. Use a nozzle type designed for the intended application. With most nozzle types, narrower spray angles produce larger droplets. Swath Adjustment. When applications are made with a crosswind, the swath will be displaced downwind. Therefore, on the upwind and downwind edges of the field, the applicator must compensate for this displacement by adjusting the path of the application equipment (e.g. aircraft, ground) upwind. Swath adjustment distance should increase with increasing drift potential (higher wind, smaller droplets, etc.). Wind. Drift potential is lowest between wind speeds of 3 to 10 mph. However, many factors, including droplet size and equipment type, determine drift potential at any given speed. If applying at wind speeds less than 3 mph, the applicator must determine if:

1. Conditions of temperature inversion exist, or

2. Stable atmospheric conditions exist at or below nozzle height. DO NOT make applications into areas of temperature inversions or stable atmospheric conditions. NOTE: Local terrain can influence wind patterns. Every applicator should be familiar with local wind patterns and how they affect spray drift. Wind Erosion. Avoid treating powdery, dry or light sandy soils when conditions are favorable for wind erosion. Under these conditions, the soil surface should first be settled by rainfall or irrigation. Additives For optimum burndown activity with Verdict® herbicide, an adjuvant system must be used that includes the following: 1 MSO-based adjuvant MUST contain at least 60% methylated seed oil. Poor performance may occur with adjuvants containing less than 60% methylated seed oil. 2 DO NOT use less than 1 pint/A of MSO with low-volume (less than 12.5 gallons/A) aerial or ground applications. When fluid fertilizer is used as the spray carrier, add 1 pint/A of MSO for optimum burndown activity. The use of AMS fertilizer is highly recommended when mix- ing Verdict with glyphosate-based herbicides. DO NOT use a nonionic surfactant (NIS) as a substitute for COC or MSO, or poor performance on broadleaf weeds will occur. When an adjuvant is to be used with this product, BASF recommends the use of a Chemical Producers and Distributors Association (CPDA) certified adjuvant. Tank Mixing Information Verdict may be tank mixed with one or more registered herbicide products according to the specific tank mixing instructions in this label and respective product labels. Refer to the Crop-specific Information for tank mixing details. It is the pesticide user’s responsibility to ensure that all products in the mixtures are registered for the intended use. Read and follow the applicable restrictions and pre- cautions and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. Compatibility Test for Mix Components Before mixing components, always perform a compatibility jar test.

3. For 20 gallons per acre spray volume, use 3.3 cups (800 mL) of water. For other spray volumes, adjust rates accordingly. Only use water from the intended source at the source temperature.

4. Add components in the sequence indicated in the Mixing Order section using 2 teaspoons for each pound or 1 teaspoon for each pint of labeled use rate per acre.

5. Always cap the jar and invert 10 cycles between compo- nent additions.

6. When the components have all been added to the jar, let the solution stand for 15 minutes.

7. Evaluate the solution for uniformity and stability. The spray solution should not have free oil on the surface, or fine particles that precipitate to the bottom, or thick (clabbered) texture. If the spray solution is not compati- ble, repeat the compatibility test with the addition of a suitable compatibility agent. If the solution is then com- patible, use the compatibility agent as directed on its label. If the solution is still incompatible, DO NOT mix the ingredients in the same tank. Mixing Order Maintain constant agitation throughout mixing and applica- tion until spraying is completed.

8. Water - Fill tank 1/2 to 3/4 full with clean water and start agitation.

9. Inductor - If an inductor is used, rinse it thoroughly after each component has been added. Adjuvant Rate Methylated seed oil (MSO)1 or Crop oil concentrate (COC) 1 gal/100 gals (1% v/v)2 PLUS PLUS Ammonium sulfate (AMS) or Urea ammonium nitrate (UAN) 8.5 to 17.0 lbs/100 gals (1% to 2% w/v) or 1.25 to 2.5 gals/100 gals (1.25% to 2.5% v/v) 13

10. Products in PVA bags - Place any product contained in water-soluble PVA bags into the mixing tank. Wait until all water-soluble PVA bags have fully dissolved and the product is evenly mixed in the spray tank before continuing.

11. Water-soluble additives (including dry and liquid fertil- izers AMS or UAN)

12. Water-dispersible products (dry flowables, wettable powders, suspension concentrates, or suspo-emulsions)

13. Water-soluble products

14. Emulsifiable concentrates (including COC or MSO adjuvants)

15. Remaining quantity of water If the spray mixture is allowed to settle for any period of time, thorough agitation is essential to resuspend spray mixture before spraying is resumed. Continue agitation while spraying. Use Restrictions • Maximum seasonal use rate - Refer to Crop-specific Information section for the maximum cumulative amount of Verdict® herbicide per cropping season. A cropping season is defined as the period following harvest of the preceding crop through the harvest of the planned or current crop. • If additional dimethenamid-P is applied, DO NOT apply more than a maximum cumulative amount of 0.98 lb ai/A dimethenamid-P per cropping season in grain sorghum, and DO NOT apply more than a maximum cumulative amount of 1.125 lbs ai/A dimethenamid-P per cropping season in field corn, popcorn, processing sweet corn, and soybean. • DO NOT apply Verdict after crop emergence because severe crop injury will occur. • DO NOT contaminate irrigation ditches or water used for domestic purposes. • Verdict is not for sale, distribution, or use in Nassau and Suffolk counties in New York State. Crop Rotation Intervals Use the following table to determine the proper interval between Verdict application and the planting of rotational crops. 1 DO NOT include time when the soil is frozen. 2 Edible bean refers to blackeyed pea, crowder pea, cowpea, and southern pea. Use the Other Crops rotational crop planting interval for beans not specifically listed in this table. 3 The planting interval for these crops and rates is further defined in the respective Crop-specific Information section of this label. Use the longer interval within listed ranges for indicated crops grown on coarse- texture soils with organic matter less than 2.0%. 4 Cover crops (winter, spring) may be planted after application of Verdict, either inter-seeded into the current crop before harvest or after harvest of the current crop. Depending on the sensitivity of the sown cover crop to Verdict, stand establishment may be reduced. If cover crops are sown for conservation purposes less than 4 months after Verdict application, DO NOT harvest as a food or feed crop, and DO NOT allow livestock to graze cover crops. Crop Verdict Use Rate (fl ozs/A) < 19 19 to 25 Rotational Crop Interval (months after application)1 Alfalfa 7 8 Beans (edible)2 4 6 Canola (rapeseed) 7 8 Chickpea 4 6 Corn, sweet 3 4 Cotton 6 6 Fruit and nut trees 6 9 Grass (forage, seed) establishment 6 9 Lentil 4 6 Peas (dry field, edible) 4 6 Rice 4 4 Small grains 4 4 Sorghum (grain) 0 1 Soybean3 4 6 Soybean3, KIXOR® Selected 4 6 Sugarbeet 7 9 Sugarcane 7 9 Sunflower 7 9 Cover crops (winter, spring)4 4 6 Other crops 7 9 14

Emergency Replanting Intervals • Field corn, popcorn, sweet corn, and grain sorghum (according to application rates in Crop-specific Information) may be replanted immediately after crop failure (because of environmental factors, including drought, frost, hail, etc.). • Soybean (according to the application rates in Crop- specific Information) may be replanted (according to the intervals in the chart following) after crop failure (because of environmental factors including drought, frost, hail, etc). Replanting Intervals to Soybean Following Crop Failure • Determine the rotational crop interval for tank mix prod- ucts and follow the most restrictive interval of all products applied. Crop-specific Information This section provides directions for Verdict in specific crops. Read product information, mixing, application, weeds controlled, and adjuvant instructions in preceding sections of the label. Read and follow tank mix product labels for restrictions, precautions, instructions, and rota- tional crop restrictions. Depending on specific crop application directions, Verdict may be applied for residual control of germinating weed seedlings before planting (preplant) or after planting but before crop emergence (preemergence) (refer to Table 1 for list of weeds controlled) or burndown control of emerged broadleaf weeds (refer to Table 2 for list of weeds controlled). Thorough spray coverage is required for control of emerged broadleaf weeds. High populations and/or varia- tions in weed size can prevent adequate spray coverage. Controlling fall-germinated weeds in the spring (e.g. horseweed/marestail) also requires thorough spray coverage. Use higher spray volumes (e.g. 15 to 20 gallons of water per acre) in these situations to increase spray cov- erage and optimize burndown activity. Field Corn (grain, seed, silage), Popcorn, and Sweet Corn Verdict may be applied preplant surface, preplant incorpo- rated, or preemergence to corn. Corn in this label refers to field corn (grown for grain, seed, or silage), popcorn, and sweet corn (processing varieties only, not including sweet corn grown for seed or fresh market varieties). Before applying Verdict to seed corn, processing sweet corn, or popcorn, verify the selectivity of Verdict on your inbred line or hybrid with your local seed company (supplier) to help avoid potential injury to sensitive inbreds or hybrids. Application Rate Verdict can be applied as part of a one-pass or planned sequential (two-pass) weed control program. A one-pass weed control program should be used where no cultivation or postemergence herbicide application is anticipated. One-pass application rates for Verdict when applied alone, in tank mix, or sequentially are provided in Table 4 for field corn and Table 5 for popcorn and processing sweet corn. Table 4. Residual Preemergence Rates of Verdict in Field Corn 1 Refer to Table 3 for definition of soil texture groups. 2 Use on coarse soils with less than 1.5% organic matter may result in crop injury. Table 5. Residual Preemergence Rates of Verdict in Popcorn and Processing Sweet Corn 1 Refer to Table 3 for definition of soil texture groups. Verdict use rates applied as the residual component of a planned sequential (two-pass) program (see Table 6 and Table 7) will provide control or suppression of listed weeds (Table 1) through early-to-mid season. For full-season weed control, apply a labeled postemergence treatment of Status ® herbicide plus glyphosate as the sequential com- ponent (this applies to field and popcorn, not sweet corn). Soil Description Verdict® herbicide Application Rate (fl ozs/A) 5 7.5 10 to 12 13 to 15 16 to 20 Replanting Interval (months after application) Coarse soils ≤ 2% organic matter 1 1 1.5 3 4 All other soils 0 0.5 1 2 4 Rate by Soil Texture and Organic Matter Content (fl ozs/A) Soil Texture1 Organic Matter ≤ 1.5% > 1.5% Coarse2 12 13 Medium 18 20 Fine 20 25 Rate by Soil Texture and Organic Matter Content (fl ozs/A) Soil Texture1 Organic Matter ≤ 1.5% > 1.5% Coarse DO NOT USE 10 Medium 13 15 Fine 15 20 15

Table 6. Residual Preemergence Rates of Verdict® herbicide in a Planned Sequential Program1 in Field Corn and Popcorn 1 Application rates in Table 6 eliminate early season weed interference until cultivation or a labeled postemergence herbicide is applied. However, application rates in Table 4 should be applied if Verdict is being used to control weeds resistant to another herbicide in the tank mix or sequential weed control program. 2 Refer to Table 3 for definition of soil texture groups. Table 7. Residual Preemergence Rates of Verdict in a Planned Sequential Program1 in Processing Sweet Corn 1 Application rates in Table 7 eliminate early season weed interference until cultivation or a labeled postemergence herbicide is applied. However, application rates in Table 5 should be applied if Verdict is being used to control weeds resistant to another herbicide in the tank mix or sequential weed control program. 2 Refer to Table 3 for definition of soil texture groups. Application Timing Fall Application For use only in Iowa, Minnesota, North Dakota, South Dakota, and Wisconsin Verdict may be applied in the fall to control weeds in con- ventional, minimum tillage, or no-till corn production systems planted the following spring. Apply from 20.0 to 25.0 fluid ounces of Verdict per acre to medium-texture and fine-texture soils with more than 2.5% organic matter. Fall applications must be made after October 1. Broadcast surface apply Verdict in the fall after crop har- vest when soil temperatures at the 4-inch depth are sustained at less than 55º F and before the ground freezes. Tillage operations may be conducted before or after apply- ing Verdict. When following an application, tillage should be no more than 2-inches to 3-inches deep to uniformly incorporate the herbicide into the upper soil surface. When a sequential application program (fall application followed by spring application of Verdict) is used, the maximum combined rate of Verdict that may be applied is 25.0 fluid ounces per acre per crop season. Early Preplant Surface Application (15 to 30 days before planting) Use application rates in Table 4 when making early preplant surface applications, using the highest application rate for a given soil texture. Early preplant surface applica- tions are not recommended on coarse soils, in areas where average annual rainfall (or rainfall plus irrigation) typically exceeds 40 inches, or for popcorn or processing sweet corn. Cultivation or a labeled postemergence herbicide application may still be required under certain conditions for complete weed control. Early preplant surface applications may be applied as part of a split application program where applications are made as part of the application timings described in this label. However, the cumulative total of sequential application rates must not exceed the maximum labeled rate for a given soil texture. Preplant Surface and Preplant Incorporated Application (up to 14 days before planting) Verdict can be applied at use rates specified in Table 4, Table 5, Table 6, or Table 7 to the soil surface or incorpo- rated up to 14 days before planting on all soil types. For preplant incorporated applications, apply Verdict and incorporate into the upper soil surface (1 to 2 inches). Use a harrow, rolling cultivator, field cultivator, or other implement for uniform shallow incorporation. Avoid deeper incorporation or reduced weed control may result. Preemergence Surface Application Apply Verdict at use rates specified in Table 4, Table 5, Table 6, or Table 7 as a broadcast treatment to the soil surface after planting and before crop emergence. Verdict must be applied before crop emergence or injury will occur. Burndown plus Residual Weed Control In addition to residual weed control at any of the applica- tion timings previously described, Verdict also provides burndown of emerged broadleaf weeds listed in Table 2. An adjuvant system (refer to Additives section for details) is required for optimum burndown activity. Burndown con- trol of emerged grass weeds or additional broadleaf weeds not listed on the label requires a tank mix with another her- bicide (like glyphosate). Residual preemergence application rates of Verdict can follow a fall or early preplant burndown application of Sharpen ® herbicide. However, DO NOT apply more than the cropping seasonal maximum cumulative amount per acre of saflufenacil from all product sources. A minimum of 14 days is required between Verdict and Sharpen applications. Burndown Weed Control Only If limited or no residual broadleaf weed control is desired, Verdict can be applied at 5.0 fl ozs/A (all soil types) with an adjuvant system any time before corn emergence for burn- down of broadleaf weeds listed in Table 2. A burndown application of Verdict can be followed by residual rates of Verdict (Table 4, Table 6, or Table 7) or Sharpen. Soil Texture2 Rate by Soil Texture (fl ozs/A) Coarse 10 to 12 Medium 13 to 15 Fine 16 to 18 Soil Texture2 Rate by Soil Texture (fl ozs/A) Coarse 10 (DO NOT apply on coarse soils with ≤ 3% organic matter) Medium 10 Fine 10 16

Separate sequential applications by at least 14 days. However, DO NOT apply more than the cropping seasonal maximum cumulative amount per acre of saflufenacil from all product sources. Enhanced Burndown in Seed Corn. Apply Verdict ® herbicide preplant surface or preemergence at 5.0 to 10.0 fl ozs/A with an adjuvant system for enhanced burn- down broadleaf weed control in seed corn before crop emergence. DO NOT apply more than 5.0 fl ozs/A on coarse soils. A sequential application of Verdict may be made with a minimum of 30 days between applications. DO NOT apply more than a maximum cumulative amount of 20.0 fl ozs/A of Verdict per cropping season in seed corn. Crop-specific Restrictions • DO NOT apply Verdict after corn emergence or severe crop injury will occur. • DO NOT apply Verdict where an at-planting application of an organophosphate or carbamate insecticide(s) is planned and/or has occurred because severe injury may result. Verdict may be applied with all other classes of at-planting insecticides including neonicotinoids and pyrethoids. EXCEPTION: Verdict may be applied when Aztec ® 2.1% Granular Insecticide, AZTEC® 4.67 G granular insecticide, Fortress® 5G granular insecticide, or SmartChoiceTM 5G granular insecticide is applied at planting as a band, T-band, or infurrow. • DO NOT apply more than a maximum cumulative amount of 0.134 lb per acre of saflufenacil from all prod- uct sources per cropping season. • DO NOT apply more than a maximum cumulative amount of 25.0 fl ozs/A of Verdict per cropping season. • Corn, popcorn, or sweet corn forage and silage must not be harvested, fed, or grazed sooner than 80 days after application. • There is no required (preharvest) interval between a pre- plant surface, preplant incorporated, or preemergence application of Verdict and the harvest of field corn grain, popcorn, seed corn, and sweet corn ears. Corn forage, stover, and sweet corn cannery waste may be fed to live- stock after harvest. Crop-specific Precautions • Verdict application may result in delayed corn emergence and stunting under certain environmental conditions including cool temperatures, excessive rain- fall/irrigation, and/or persistent wet soil conditions occurring after application. • Ensure the corn seed row is closed. Soil conditions that cause poor seed furrow closure and coverage may result in delayed corn emergence or stunting. • Verdict applied to processing sweet corn planted at a depth of 1/2 inch or less may result in crop injury. Tank Mixes Verdict may be tank mixed* or applied sequentially with one or more of, but not limited to, the following herbicide products: • Clarity ® herbicide • Sharpen® herbicide • Status® herbicide • Zidua® herbicide • atrazine • glyphosate (e.g. Roundup ® herbicide) NOTE: Refer to tank mix product labels to confirm the respective tank mix products are registered for use on spe- cific corn types; not all corn products are registered for use on seed corn, popcorn, and processing sweet corn.

• Refer to Tank Mixing Information section for additional instructions. Fallow Verdict may be used as a burndown treatment to control broadleaf weeds at any time of the year during the fallow period following crop harvest and before the following crop is planted. Application Rate and Timing Apply Verdict as a broadcast burndown spray at 5.0 to 10.0 fl ozs/A plus recommended adjuvants (refer to Additives section for details). For best product performance, apply Verdict when broadleaf weeds are small and actively growing (refer to Table 2 for list of weeds controlled). Thorough coverage of existing weeds is essen- tial and higher spray volumes may be needed for best performance. Sequential applications may be made with a minimum of 14 days between applications; DO NOT apply more than a maximum cumulative amount of 25.0 fl ozs/A of Verdict per cropping season. For residual weed control, Verdict may be applied at 10.0 to 25.0 fl ozs/A. Specific rotational crop intervals must be observed between an application of Verdict and planting of the following crop (see Crop Rotation Intervals section for crop rotation restrictions). Tank Mixes Broad-spectrum burndown control of grass weeds and/or additional broadleaf weeds requires a tank mix with anoth- er herbicide. Verdict may be tank mixed* or applied sequentially with one or more of, but not limited to, the fol- lowing herbicide products: • Clarity • Distinct ® herbicide • glyphosate (e.g. Roundup)
• Refer to Tank Mixing Information section for additional instructions. 17

Grain Sorghum Verdict® herbicide may be applied preplant surface, pre- plant incorporated, or preemergence to grain sorghum. All Verdict applications must only be made to sorghum seed that has been properly treated by the seed company with an approved chloroacetamide herbicide safener or severe injury may occur. Under high soil moisture and/or cool conditions, Verdict application may cause temporary stunting or leaf wrapping of grain sorghum. Grain sorghum normally outgrows these symptoms within 10 to 14 days. Application Rate Application rates for Verdict in grain sorghum depend on use pattern. See Table 8 for application rates in grain sorghum for Verdict when applied alone, in tank mix, or sequentially. Table 8. Residual Rates of Verdict in Grain Sorghum 1 Refer to Table 3 for definition of soil texture groups. For grain sorghum grown in Nebraska and South Dakota, see Table 9 for application rates for Verdict when applied alone, in tank mix, or sequentially. Table 9. Residual Rates1 of Verdict in Grain Sorghum in Nebraska and South Dakota 1 Application rates in Table 9 eliminate early season weed interference. Full-season weed control requires a labeled tank mix partner, sequential postemergence herbicide application, and/or cultivation. 2 Refer to Table 3 for definition of soil texture groups. Application Use Rate for Tank Mix Program For grain sorghum grown in all states, apply Verdict at 10.0 fl ozs/A in a tank mix with other dimethenamid-P- containing herbicides; see Table 10 for use rates. Table 10. Use Rates for Dimethenamid-P when Tank Mixed with Verdict in Grain Sorghum 1,4 1 Application rates in Table 10eliminate early season weed interference. 2 Refer to Table 3 for definition of soil texture groups. 3 Refer to the Outlook® herbicide label for conversion of use rates to fl ozs/A. 4 A tank mix with atrazine may also be applied. Refer to atrazine product labels for additional details on use rates in grain sorghum. Full-season weed control requires atrazine up to the maximum atrazine rate allowed for the soil texture and/or field. Application Timing Early Preplant Surface Application (15 to 30 days before planting) Use application rates in Table 8, Table 9, and Table 10 when making early preplant surface applications, using the highest application rate for a given soil texture. Early pre- plant surface applications are not recommended on coarse soils or in areas where average annual rainfall (or rainfall plus irrigation) typically exceeds 40 inches. Cultivation or a labeled postemergence herbicide application may still be required under certain conditions for complete weed control. Early preplant surface applications may be applied as part of a split application program where applications are made as part of the application timings described in this label. However, the cumulative total of sequential application rates must not exceed the maximum labeled rate for a given soil texture. Preplant Surface and Preplant Incorporated Application (up to 14 days before planting) Verdict can be applied at use rates specified in Table 8, Table 9, and Table 10 to the soil surface or incorporated up to 14 days before planting on all soil types. For preplant incorporated applications, apply Verdict and incorporate into the upper soil surface (1 to 2 inches). Use a harrow, rolling cultivator, field cultivator, or other implement for uni- form shallow incorporation. Avoid deeper incorporation or reduced weed control may result. Preemergence Surface Application Apply Verdict at use rates specified in Table 8, Table 9, and Table 10 as a broadcast treatment to the soil surface after planting and before crop emergence. Verdict must be applied before crop emergence or injury will occur. Rate by Soil Texture and Organic Matter Content (fl ozs/A) Soil Texture1 Organic Matter ≤ 1.5% > 1.5% Coarse DO NOT USE 10 Medium 13 15 Fine 15 20 Rate by Soil Texture and Organic Matter Content (fl ozs/A) Soil Texture2 Organic Matter ≤ 1.5% > 1.5% Coarse DO NOT USE 10 to 12 Medium DO NOT USE 13 to 15 Fine DO NOT USE 16 to 18 Use Rate of Dimethenamid-P3 by Soil Texture and Organic Matter Content (lb ai/A) Soil Texture2 Organic Matter < 3% ≥ 3% Coarse 0.19 to 0.28 0.28 to 0.47 Medium 0.28 to 0.47 0.47 to 0.61 Fine 18

Burndown plus Residual Weed Control In addition to residual weed control at any of the applica- tion timings previously described, Verdict® herbicide also provides burndown of emerged broadleaf weeds listed in Table 2. An adjuvant system (refer to Additives section for details) is required for optimum burndown activity. Burndown control of emerged grass weeds or additional broadleaf weeds not listed on the label requires a tank mix with another herbicide (like glyphosate). Residual preemergence application rates of Verdict can follow a fall or early preplant burndown application of Sharpen ® herbicide. However, DO NOT exceed the crop- ping seasonal maximum cumulative amount of saflufenacil per acre from all product sources. A minimum of 30 or 60 days is required between Verdict applications and Sharpen applications (depending on Sharpen use rate; see Sharpen product label). Burndown Weed Control Only Verdict can be applied at 5.0 to 10.0 fl ozs/A (all soil types) with an adjuvant system (refer to the Additives section for details) any time before sorghum emergence for burndown of weeds listed in Table 2. A burndown application of Verdict can be followed by residual rates of Verdict. Sequential applications must be separated by at least 14 days. However, DO NOT apply more than the cropping seasonal maximum cumulative amount per acre of saflufenacil from all product sources. Crop-specific Restrictions • DO NOT apply Verdict after grain sorghum emergence or severe crop injury will occur. • DO NOT apply Verdict where an at-planting application of an organophosphate or carbamate insecticide(s) is planned and/or has occurred or severe injury may result. • DO NOT apply more than a maximum cumulative amount of 0.111 lb per acre of saflufenacil from all prod- uct sources per cropping season. • DO NOT apply more than a maximum cumulative amount of 25.0 fl ozs/A of Verdict per cropping season. • Verdict is not registered for use on sweet or forage sorghum. • Sorghum forage and silage can be harvested, fed, or grazed 70 or more days after application. Tank Mixes Verdict may be tank mixed* or applied sequentially with one or more of, but not limited to, the following herbicide products: • Clarity ® herbicide (preplant only) • Outlook® herbicide • Sharpen • atrazine • glyphosate (e.g. Roundup ® herbicide)

• Refer to Tank Mixing Information section for additional instructions. Soybean Verdict may be applied in the fall and/or in the spring as a preplant or preemergence burndown application in conventional and reduced-till or no-till soybean for broadleaf weed control. An adjuvant system (refer to Additives section for details) is required for optimum burn- down activity. Under high soil moisture and/or cool conditions, Verdict application may cause temporary stunting or leaf chlorosis/necrosis of soybean. Soybean normally outgrows these symptoms within 10 to 14 days. Not for use in soybean in California. Application Rate and Timing Fall Application Apply Verdict at 5.0 to 10.0 fl ozs/A (0.022 to 0.044 lb ai/A of saflufenacil) for burndown broadleaf weed control after the prior crop is harvested. For residual weed control, Verdict may be applied up to 15.0 fl ozs/A. Application must be made before first killing frost. Fall application can be made to all soil types. Spring Application For all spring applications of Verdict, refer to Soybean Planting Interval information for minimum planting intervals. Apply Verdict early preplant through preemergence at 5.0 fl ozs/A for burndown broadleaf weed control before crop emergence. For early preplant enhanced burndown broadleaf weed control, apply Verdict at 7.5 or 10.0 fl ozs/A. Sequential Application Apply Verdict following a fall or early preplant burndown application of Sharpen OR Verdict (at 5.0 to 10.0 fl ozs/A). However, DO NOT apply more than the cropping seasonal maximum cumulative amount per acre of saflufenacil from all product sources; see Crop-specific Restrictions section. A minimum of 30 days and 60 days is required between product applications totaling 0.044 lb ai/A and 0.067 lb ai/A of saflufenacil, respectively. Soybean Planting Interval Depending on Verdict use rate, soil texture, and organic matter, an interval between Verdict application and plant - ing may be required (see Table 11 and Table 12). This interval must be observed before planting soybean or crop injury may occur. 19

Table 11. Minimum Soybean Planting Intervals 1 Refer to Table 3 for definition of soil texture groups. Table 12. Minimum Soybean Planting Intervals when Verdict is Applied with other Group 14/Group E Herbicides 1 1 Refer to other product’s label and follow the most restrictive interval. 2 Group 14/Group E herbicides including sulfentrazone or flumioxazin 3 Refer to Table 3 for definition of soil texture groups. Interval for reduced-till and no-till soybean only. Interval for conventional- till soybean is 30 days. Crop-specific Restrictions • DO NOT apply Verdict when soybean has reached the cracking stage or after emergence or severe crop injury will occur. • DO NOT apply more than a maximum cumulative amount of 20.0 fl ozs/A of Verdict (0.089 lb ai/A of saflufenacil) per cropping season. Sequential applications MUST be separated by at least 30 days. • DO NOT apply more than a maximum cumulative amount of 0.089 lb per acre of saflufenacil from all prod- uct sources per cropping season. • DO NOT apply Verdict within 30 days of planting where an at-planting application of an organophosphate or carbamate insecticide(s) is planned and/or has occurred because severe injury may result. • DO NOT graze or feed forage, hay, or straw to livestock. Crop-specific Precautions • Ensure the seed row is sufficiently covered with soil to avoid washing and concentration of the herbicide in the seed zone. • Always use the most restrictive preplant interval of all inclusive herbicides when applying Verdict as part of a tank mix. • Other Group 14/Group E herbicides labeled for postemergence application in soybean may be used 14 days or more after soybean emergence. Refer to other products’ labels for use directions. Tank Mixes Verdict may be tank mixed or applied sequentially with one or more of, but not limited to, the following herbicide products: • Clarity ® herbicide (preplant only) • Extreme® herbicide • Prowl® H2O herbicide • Pursuit® herbicide • Sharpen® herbicide • Zidua® herbicide • glyphosate (e.g. Roundup® herbicide)

• Refer to the Tank Mixing Information section for addi- tional instructions. Soybean (only Kixor® Selected varieties) Use directions in this section are only intended for Kixor ® Selected soybean varieties. Contact your local BASF representative or go to http://www.agproducts.basf.us/products/kixor- selected-soybean-varieties.html for a full list of current Kixor® Selected soybean varieties. Verdict may be applied in fall and/or in spring as a preplant or preemergence burndown application in conventional and reduced-till or no-till soybean for broadleaf weed control; refer to Table 2 for list of weeds controlled. An adjuvant system (refer to Additives section for details) is required for optimum burndown activity. Under high soil moisture and/or cool conditions, Verdict application may cause temporary stunting or leaf chlorosis/necrosis of soybean. Soybean normally outgrows these symptoms within 10 to 14 days. Not for use in soybean in California. Application Rate and Timing Fall Application Apply Verdict at 5.0 to 10.0 fl ozs/A (0.022 to 0.044 lb ai/A of saflufenacil) for burndown broadleaf weed control after the prior crop is harvested. For residual con- trol, Verdict may be applied up to 15 fl ozs/A. Application must be made before first killing frost. Fall application can be made to all soil types. Minimum Preplant Interval (days) Required between Verdict® herbicide Application and Soybean Planting Verdict Use Rate (fl ozs/A) Soil Texture1 Coarse Soils with ≤ 2.0% Organic Matter All Other Soils 5.0 30 0 7.5 30 14 10.0 44 30 Minimum Preplant Interval (days) Required between Verdict Application and Soybean Planting when Tank Mixed or Sequentially Applied with a Group 14/Group E Herbicide2 Verdict Use Rate (fl ozs/A) Soil Texture3 Coarse Soils with ≤ 2.0% Organic Matter All Other Soils 5.0 30 14* 7.5 30 30 10.0 44 30 20

21 Spring Application For all spring applications of Verdict® herbicide, refer to Soybean Planting Interval information for minimum planting intervals. Apply Verdict early preplant through preemergence at 5.0 fl ozs/A for burndown broadleaf weed control before crop emergence. Apply Verdict early preplant at 10.0 fl ozs/A for enhanced burndown broadleaf weed control. Sequential Application Apply Verdict following a fall or early preplant burndown application of Sharpen® herbicide OR Verdict (at 5.0 to 10.0 fl ozs/A). However, DO NOT apply more than the cropping seasonal maximum cumulative amount per acre of saflufenacil from all product sources; see Crop-specific Restrictions section. A minimum of 30 days and 60 days is required between product applications totaling 0.044 lb ai/A and 0.067 lb ai/A of saflufenacil, respectively. Soybean Planting Interval Depending on Verdict use rate, soil texture, and organic matter, an interval between Verdict application and plant - ing may be required (see Table 13) or crop injury may occur. Table 13. Minimum Kixor® Selected Soybean Planting Intervals 1 Refer to Table 3 for definition of soil texture groups. Crop-specific Restrictions • DO NOT apply more than a maximum cumulative amount of 20.0 fl ozs/A of Verdict (0.089 lb ai/A of saflufenacil) per cropping season. Sequential applications MUST be separated by at least 30 days. • DO NOT apply more than a maximum cumulative amount of 0.089 lb ai/A of saflufenacil per cropping sea- son in soybean from all product sources. • DO NOT apply Verdict when soybean has reached the cracking stage or after emergence or severe crop injury will occur. • DO NOT apply Verdict within 30 days of planting where an at-planting application of an organophosphate or carbamate insecticide(s) is planned and/or has occurred because severe injury may result. • Always use the most restrictive preplant interval of all inclusive herbicides when applying Verdict as part of a tank mix. • DO NOT graze or feed forage, hay, or straw to livestock. • DO NOT apply Verdict with other products containing Group 14/Group E herbicides (including sulfentrazone or flumioxazin) as a tank mix or a sequential spring applica- tion within 30 days of planting because crop injury may result. Crop-specific Precautions • Ensure the seed row is sufficiently covered with soil to avoid washing and concentration of the herbicide in the seed zone. • Other Group 14/Group E herbicides labeled for postemergence application in soybean may be used 14 days or more after soybean emergence. Refer to other products’ labels for use directions. Tank Mixes Verdict may be tank mixed* or applied sequentially with one or more of, but not limited to, the following herbicide products: • Clarity ® herbicide (preplant only) • Sharpen • glyphosate (e.g. Roundup® herbicide)

• Refer to the Tank Mixing Instructions section for addi- tional instructions. Minimum Preplant Interval (days) Required between Verdict Application and Planting of Kixor® Selected Soybean Varieties Verdict Use Rate (fl ozs/A) Soil Texture1 Coarse Soils with ≤ 2.0% Organic Matter All Other Soils 5.0 0 0 10.0 30 0

Clarity, Distinct, Extreme, Kixor, Outlook, Prowl, Pursuit, Sharpen, Status, Verdict, and Zidua are registered trademarks of BASF. Aztec is a registered trademark of Bayer. Fortress is a registered trademark of AMVAC Chemical Corporation. SmartChoice is a trademark of AMVAC Chemical Corporation. Roundup is a registered trademark of Monsanto Technology LLC. © 2018 BASF Corporation All rights reserved. 007969-00279.20170828b.NVA 2017-04-320-0031 Supersedes: NVA 2015-04-320-0179 BASF Corporation 26 Davis Drive Research Triangle Park, NC 27709 Conditions of Sale and Warranty The Directions For Use of this product reflect the opinion of experts based on field use and tests. The directions are believed to be reliable and must be followed carefully. However, it is impossible to eliminate all risks inherently associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences may result because of such factors as weather conditions, presence of other materials, or use of the product in a manner inconsistent with its labeling, all of which are beyond the control of BASF CORPORATION (“BASF”) or the Seller. To the extent consistent with applicable law, all such risks shall be assumed by the Buyer. BASF warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes referred to in the Directions For Use, subject to the inherent risks, referred to above. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BASF MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS OR MERCHANTABILITY OR ANY OTHER EXPRESS OR IMPLIED WARRANTY. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BUYER’S EXCLUSIVE REMEDY AND BASF’S EXCLUSIVE LIABILITY, WHETHER IN CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY, OR OTHERWISE, SHALL BE LIMITED TO REPAYMENT OF THE PURCHASE PRICE OF THE PRODUCT. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BASF AND THE SELLER DISCLAIM ANY LIABILITY FOR CONSEQUENTIAL, EXEMPLARY, SPECIAL OR INDIRECT DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT. BASF and the Seller offer this product, and the Buyer and User accept it, subject to the foregoing Conditions of Sale and Warranty which may be varied only by agreement in writing signed by a duly authorized representative of BASF. 1108 22