crop-chem-docs/corpus/epa_ppls/100-1186.md

TOUCHDOWN 008

• EPA Reg No: 100-1186
• Registrant: SYNGENTA CROP PROTECTION, LLC
• Signal word: Caution
• Active ingredients: Dicamba (0.6%); Glyphosate, potassium salt (43.5%)
• Label accepted: 2004-05-06
• Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000100-01186-20040506.pdf

---

ICO- II gG,::. T.' I-:J' I ,';' 'Y' Oi f ': l f • 1 i{eglJ::ra1-],' I '"I':m, l\:;FI:CY -'1 c,C:<TclinS , l-i) \C :i(", ';. \ 1 '1" W :!'CH60 EPA Reg. Number: 100-1186 :uance. 1------"--,------11 NOTICE OF PESTICIDE: ~ Registration _ ReregistrCttion Term of Issuanu' Conditional Name of Pesti:"):ic I-----------------------------------------------'-----I Syngenta Crop Protection, Inc. P.O. Box 18300 Greensboro, NC 27419-8300 Note: Changes In labeling differing ill substdllce !'rom that accepted in connection with this n :3:_; :,:.;on must be submitted t.O d:1d accepted by the Registralor. Ihv1510n prior to use of the label in commerce I, 'Y j' corresponder:-!O' on this product always t'efer to t.he above EPA registration number. On ::.he baRis ,, lnformation fuulished by ~ r.e ng:Lc.;rant, the above named pesticide is hereby re;pstered/'"':"'lls::.ered unde:- thE:' FpdE,'Lil JnsectJ.l:ide, Fungicide and Rodenticide Act. ;';'",.:l.lSt1at>.lI In no way t8 b const.r!..;ed ,15 .J.;'l c'noc:-sement or recommendation of this produc:t l'!'L1(,l' to ;')lo=""c, health and thl:' envlro:1I'Li,,'nl, thl' Ad~ ';listr.:ltor, on his motion, may at any l~[·'· :.1l0 r('91,;tra,: ::,):; of a pest.lCldE-' ;.n acccn.ldlV;" ·",t:ll ''-:1(, I\ct. The acceptance of any name III C:,' 1"C9:st1'at:18Jl c::: a product \lndel tl11s A::l 15 l:lt. t. De '..:onstrued as giving the registrant a:', ·,J5[.' <):' t.he l'i,o·.'C' 01" to its USC"' if j :'. il:l, b('f'l cC"-'f'l"pd .cy others. T"jency, In ,lor cancel ·"'lth the ~c'lusive This product is conditionally registered it] accordance with section 3(c)(7)(A) ofthL' F, d .. ,: al Insecticide, Fungicide, and Rodenticide Act (FIFRA) provided that you:

1. Suhmit revised basic and alternate CSFs corrected as directed in enclosed produc1 C] i,.llistry reVlew.
2. Submit the result of the ongoing storage and stability (830.6317) and corrosion cheerll ··;·istics 'I I, (830.6320) studies once they are complete. 3, Submiticite all data required for registration/reregistration of your product when the ... ·.'!ley requires all registrants of similar products to submit such data.
3. Make the labeling changes listed below before you release the product for shipmen;. a. Add the phrase "EPA .Registration No. 100-1186". b. Modify the footnote to the active ingredient statement to give the number of pound: US gallon of glyphosate acid equivalents. Submit two (2) copies of your final printed labeling before you release the product tell ",:nent. If these conditions are not complied with, the registration will be subject to canccll:qi,," accordance with FIFRA section 6( e). Your relcase for shipment of the product COnS\I: :1. .cceptance ofthese conditions. A stamped coPy of labeling is enclosed for your records. F:'::'::==..:..:::J.~~=c...:.:.:..==.:::...,=:..:.:=:::::... __ ---. _______ ._ .. ____ I S1.:nl\l.m: of I\p)'11\1 In!.' Ofli'>1af· ( . /' Dale: El'll hHm ~570·)

Touchdown® 008 Herbicide GROUP HERBICIDES Nonselective Foliar Systemic Herbicide for Weed Control in or on Conservation Reserve Programs (CRP), Corn (except Sweet Corn), Fallowland and Postharvest Uses, Farmsteads, Grass Seed Production, Pastures, Small Grains, Sorghum, and Soybeans Active Ingredients: *Glyphosate, N-(phosphonomethyl) glycine, in the form of the potassium saiL .... 43.5% **Dicamba, 3,6-dichloro-o-anisic-acid ....................................................................... 0.6% , Other Ingredients:. _____ .. 55.9% Total: 100.0% *Contains 4 pounds per U.S. gallon of glyphosate acid. **Contains 0.72 pounds per U.S. gallon of dicamba. KEEP OUT OF REACH OF CHILDREN. CAUTION See additional precautionary statements and directions for use inside booklet EPA Reg. No. 100- EPA Est. SCP _ gallons [2.5 gallons) Net Contents _ gallons [Bulk) Net Contents ACCEPTED wilh COIUMEl'TS In EPA Letter Hatet1k MAY - 6 2004 Ullder the Federal JD!eClldde, t'up-I!icide, .... d Rod,nII.lde A<t, , .. amended, (or Ibe peolioid .. r<!Ii,rercd uad ... EPA Rea. No. IO"O-IW'e

-2- I '--'""" --------- - - -- , If in eyes: o Hold eye open and rinse slowly and gently with water fo: minutes. o Remove contact lenses, if present, after the first 5 minull'" ,,[)n I continue rinsing eye. j Ifon skin or o Call,<l poisgn c()r1t~()IC;nter or doctor for teatment advlc,' o Take off contaminate clothing. J' tot:ing_ , If o Rinse skin immediately with plenty of water for 15·20 nll:, ,,:: " o Cal~a pois()ncgntrol center or doctor for treatment.advice o Call a poison control center or doctor immediately for treiit:r, III advice, I swallowed: o Have person sip a glass of water if able to swallow. I o Do not induce vomiting unless told to do so by a pOison c" ,':>1 center or doctor, , __ ~", ""'~ CJ,\fE!.a_nythln_g.by mo.LJth to an unconscious person , If inhaled: 0 Move person to fresh air. 'I 0 If person is not breathing. call 911 or an ambulance, thel, , artificial respiration, preferably mouth·to-mouth if possible, k.. 0 Call a.poisCJ,nc:ontrol center or doctor for further treatment 'ie :ice. 1~~;t~:,h;tic:CJ~~~~it:~tr label with yo:n CallingOso:control c:,. ' or , HOTLINE NUMBER For 24 Hour Medical Emergency Assistance (Human or Animal) Or Chemical Emergency Assistance (Spill, Leak, Fire or Accident) Call 1-800-888-8372 --", .. -",.,-, PR-ECAUTIONARY STATEMENTS---------- Hazards to Humans and Domestic Animals CAUTION Causes moderate eye irritation, Avoid contact with eyes or clothing, Wash t, ,o:~:ghly with soap and water after handling. Personal Protective Equipment (PPE) Applicators and other handlers must wear: o long sleeved shirt and long pants o socks and shoes

) ) -4- -=-=-=-=-:=-=-:-:c:-::-=--::c~::-::-___ ------- ____ =-- -"------ ------------"--- CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY ,-------------------------- ------~-- NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation of Warranty and Liability before buying or using this product If the terms are not acceptable, return the product at once, unopened, and the purchase price will be refunded. The Directions for Use of this product should be followed carefully_ It is impossible to eliminate all risks inherently associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences may result because of such factors as manner of use or application, weather or crop conditions, presence of other materials or other influencing factors in the use of the product, which are beyond the control of SYNGENTA CROP PROTECTION, INC. or Seller. All such risks shall be assumed by Buyer and User, and Buyer and User agree to hold SYNGENTA and Seller harmless for any claims relating to such factors. SYNGENTA warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes stated in the Directions for Use, subject to the inherent risks referred to above, when used in accordance with directions under normal use conditions. This warranty does not extend to the use of this product contrary to label instructions, or under abnormal conditions or under conditions not reasonably foreseeable to or beyond the control of Seller or SYNGENTA, and Buyer and User assume the risk of any such use. SYNGENTA MAKES NO WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR IMPLIED WARRANTY EXCEPT AS STATED ABOVE. In no event shall SYNGENTA or Seller be liable for any incidental, consequential or special damages resulting from the use or handling of this product. THE EXCLUSIVE REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY OF SYNGENTA AND SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES (INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SHALL BE THE RETURN OF THE PURCHASE PRICE OF THE PRODUCT OR, AT THE ELECTION OF SYNGENTA OR SELLER, THE REPLACEMENT OF THE PRODUCT. SYNGENTA and Seller offer this product, and Buyer and User accept it, subject to the foregoing Conditions of Sale and Limitations of Warranty and of Liability, which may not be modified except by written agreement Signed by a duly authorized representative of SYNGENTA.

-5- DIRECTIONS FOR USE It is a violation of Federal law to lise this product in a manner inconsistent v, ' labeling. Touchdown 008 should be used only in accordance with recommendatiuns UII ,:115 label or in separately published supplemental labeling recommendations for this! 1-, .. ~t. Do not apply this product in a way that will contact workers or other persons "I,:ler directly or through drift. Only protected handlers may be in the area dUring iiil, "':ation. For any requirements specific to your State or Tribe, consult the agency resp(),,:;lble for pesticide regulation. AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labeling and with the Worker P:'ote·-t:on Standard, 40 CFR part 170. This Standard contains requirements for the [:u'.· 'I:on of agricultural workers on farms, forests, nurseries, and greenhouses, and halylle!s of agricultural pesticides. It contains requirements for training, decontaminatlull. notification, and emergency assistance. It also contains specific instruction:, "l! ,d exceptions pertaining to the statements on this tabel about personal protec:'\·,· equipment (PPE) and restricted-entry interval. The requirements in this bOl (" "Y apply to uses of this product that are covered by the Worker Protection Stcl!I(',. ci. Do not enter or allow worker entry into treated areas during the restricted-en tn interval (REI) of 12 hours. PPE required for early entry to treated areas that is permitted under the Wor':.'l·· Protection Standard and that involves contact with anything that has been '.:: 'd, such as plants, soil, or water, is: • Coveralls • Chemical-resistant gloves (Category A), such as barrier laminate. bllt,,1 ' [)ber ~14 mils, nitrile rubber ~14 mils, neoprene rubber 14 mils, natural rutIJ' j' >14 mils, polyethylene, polyvinyl chloride (PVC) ~14 mils or viton ~14 mil:. • Shoes Ius socks NON-AGRICULTURAL USE REQUIREMENTS The requirements in this box apply to uses of this product that are NOT wi!:1::' it; scope of the Worker Protection Standard for agricultural pesticides (40 CFF ,'I 170). The WPS applies when this product is used to produce agricultural plants e:l ' '1S, forests, nurseries, or greenhouses. Keep people and pets off treated areas until spray solution has dried.

-b- STORAGE AND DISPOSAL Do not contaminate water, food, or feed by storage or disposal. Pesticide Storage Keep container closed to prevent spills and contamination. Pesticide Disposal Wastes resulting from the use of this product may be disposed of on site or ~l, "n approved waste disposal facility. Container Disposal [2.5 gallon] Triple rinse (or equivalent). Then offer for recycling or reconditioning, or PUtlctUi', :md dispose of in a sanitary landfill or by incineration, or, if allowed by State alld lUi,.' authorities, by burning. If burned, stay out of smoke. Container Disposal [Bulk/Mini-Bulk] Reseal container and offer for reconditionirlg, or triple rinse (or equivalent) ane!: ifer for recycling or reconditioning, or clean in accordance with manufacturer's instl'uc1lc ·:S. For Recyclable/Refillable Containers: Before refilling, inspect thoroughly for damage such as cracks, punctures, b" dents, abrasions, and damaged or worn threads on closure devices. After flll;", :'ld before transporting, check for leaks. Do not refill or transport damaged or If.I,: container. CONTAINER IS NOT SAFE FOR FOOD, FEED, OR DRINKING WATER! GENERAL INFORMATION For use in all states [including but not limited to] Colorado, Idaho, Montana. ~"ClC:l: Dakota, South Dakota, Utah, Wyoming, and portions of Kansas', Nebraska'. :.ie,ada', Oklahoma', Oregon', and WaShington'. This product is authorized for use in specified counties in the following states I" 115as, Nebraska, Nevada, Oklahoma, Oregon, and Washington. 'Kansas: Barber, Barton, Cheyenne, Clark, Comanche, Cowley, Decatur. ::0::'" ' is, Ellis, Ellsworth, Finney, Ford, Gove, Graham, Grant, Gray, Greeley, Hamilton. i ')er, HaSkell, Hodgemean, Kearny, Kingman, Kiowa, Lane, Lincoln, Logan, Meal . .'" hell, Morton, Ness, Norton, Osborne, Pawnee, Pratt, Rawlins, Reno, Rice, Rook> ;:-

~~ " -7- Russell, Scott, Sedgwick, Seward, Sheridan, Sherman, Stafford, Stanton, Stevens, Sumner, Thomas, Trego, Wallace Wichita 'Nebraska: Arthur, Banner, Box Butte, Chase, Cheyene, Dawes, Deuel, Dundy, Frontier, Garden, Grant, Hayes, Hitchcock, Hooker, Keith, Kimball, Lincoln, McPherson, Morrill, Perkins, Red Willow, Scotts Bluff, Sheridan, Sioux 'Nevada: Churchill, Elko, Humboldt, Lyon, Pershing 'Oklahoma: Alfalfa, Beaver, Blaine, Canadian, Cimarron, Custer, Dewey, Ellis, Garfield, Grant, Harper, Kay, Kingfisher, Logan, Major, Noble, Pawnee, Payne, Roger Mills, Texas, Woods, Woodward 'Oregon: Baker, Crook, Deschutes, Gilliam, Grant, Hamey, Hood River, Jefferson, Malheur, Morrow, Sherman, Umatilla, Union, Wallowa, Wasco, Wheeler 'Washington: Adams, Asotin, Benton, Chelan, Columbia, Douglas, Ferry, Franklin, Garfield, Grant, Kittitas, Klickitat, Lincoln, Okanogan, Pend Oreille, Spokane, Stevens, Walla Walla, Whitman, Yakima Touchdown 008 is a nonselective foliar systemic herbicide used to control a broad spectrum of emerged grass and broad leaf weeds, both annual and perennial, in: • • • • • • • • • Conservation Compliance/Conservation Reserve Program (CRP) Corn (except sweet corn) Fallowland and Postharvest Uses Farmsteads Grass seed production Pastures Small Grains Sorghum Soybeans Touchdown 008 is formulated as a liquid concentrate which contains 4 pounds of glyphosate acid equivalent (a.e.) and 0.062 pounds of dicamba per gallon. GENERAL USE PRECAUTIONS • Touchdown 008 requires actively growing green plant tissue to function. Application to drought-stressed weeds or weeds with little green foliage (i.e. mowed, cut, or hailed on weeds); weeds covered with dust; weeds damaged by insects or diseases may result in reduced weed control. • Touchdown 008 does not provide soil residual control of weeds. Weeds emerging after application will require retreatment.

-8- • Heavy rainfall or irrigation shortly after application may require retreatmC'll~ • Tillage or mowing within 3 days following application may reduce weed cOlltrol. • Do not apply this product through any type of irrigation system. • Do not spray if conditions of thermal inversion exist, or if wind direction alIC: speed may cause spray to drift onto adjacent nontarget areas. Drift miniIT,;zation is the responsibility of the applicator. Consult with local and State agnculilli"al authorities for information regarding avoiding or minimizing spray drift • It is recommended that the spray system be thoroughly cleaned with wilter Clnd a commercial tank cleaner after each use. • Spray solutions of Touchdown OU8 should be mixed, stored, and applied u,wlg only plastic, plastic-lined steel, sti;linless steel, aluminum, or fiberglass containers. Concentrate should not be stored in galvanized steel, carboll ":,,:el, aluminum, or unlined steel containfJrs. • There are no rotational crop restrictions following application of this product • Damage may be caused by contact of Touchdown 008 to any vegetatio:. tu which treatment is not intended. • In crop areas, do not exceed a total of 6 Ibs. a.e. glyphosate (6 qts. TOUC;V:lwn 008) per acre per year. In noncrop areas, do not exceed a total of 8 Ills ;, (; glyphosate (8 qts. Touchdown 008) per acre per year. • Do not exceed 0.75 Ibs. a.e. glyphosate (0.75 qt. Touchdown 008) per dCI·. :)y air unless otherwise specified on this label. • For broadcast postemergence treatments, do not harvest or feed treated vegetation for 8 weeks following application, unless otherwise specifie(~. • The maximum use rates stated throughout this product's labeling apply ;:;115 product combined with the use of all other herbicides containing glypho:;st:. or sulfosate as the total acid equivalent, whether applied as mixtures or seD,,, :l'ely. Calculate the application rates and ensure that the total use of this and c'j'r glyphosate or sulfosate containing products does not exceed maximum I" ··ate.

-9- GL YPHOSATE RESISTANT WEED MANAGEMENT Touchdown 008 is a mixture of glyphosate (Group 9 Herbicide) and dicamba iC;".,up 4 Herbicide). Some naturally occurring weed biotypes resistant to glyphosate or ci::amba may exist through normal genetic variability in any weed population. The repeiltc,ci use of herbicides with the same mode of action is known to lead under certain conc!:Uns to a selection of resistant weeds. Certain agronomic practices reduce the Iikelil1CJcci :nat resistant weed populations will develop and integrated strategies are known tn II.IlIage such problem weeds. Glyphosate and dicamba are the active ingredients in the herbicide Touchdown OJ8. The primary mode of action of glyphosate involves inactivation of the target enzj:118 5- enolpyruvylshikimate-3-phosphate synthase (EPSPS). This enzyme is involved i~ the synthesis of several essential amino acids, that are the building blocks for protelllS needed for plant growth and development. In susceptible weeds glyph os ate bill!" tightly to EPSPS rendering the enzyme ilHlctive. With the inactivation of EPSP~' ,'le plant is unable to produce certain essential amino acids resulting in plant death. VI'lthin the USA specific biotypes of horseweed/marestail, Conyza canadensis and r:uic' ryegrass, Lolium rigidum have become resistant to glyphosate. The primary mode of action of dicamba involves deactivation of auxin-bindinQ p"'i,"ins in the cytosol or plasma membrane, disrupting endogenous auxin function. -;'/,1:, causes deregulation of RNA and protein synthesis progressing to plant death. ','1' Ilin the USA a specific biotype of kochia, Kochia scoparia, has become resistant to dicamba. Following is a list of Best Weed Management practices to be considered in glypl';ate­ based programs. • Rotate glyphosate with herbicides with different modes of action. • Rotate glyphosate tolerant Roundup Ready® (RRTM) crops with conventioIIC'''-0Ps to reduce resistant volunteers. • Use alternative burndown and/or residual herbicide chemistry for RR crops Ii to require more than one application of glyphosate. • Do not use more than two applications of a glyphosate based herbicide over . !'-vo year period in RR corn and RR soybeans production. Up to three in crop applications may be used in RR cotton per year if glyphosate application io ,,:·ted with in-crop cUltivation. • Use full labeled rates to minimize tolerant escapes and do not allow weeci ,i' 'es to produce seeds or vegetative propagules. • Monitor treated weed populations for loss of field efficacy. • Contact your local extension specialist, certified crop advisors, and/or mar,. .Jrer for herbicide resistant management and/or integrated weed management recommendations for specific crops and resistant weed biotypes.

-10- 11/3"1 Since the occurrence of resistant weeds is difficult to detect prior to use, Syngenta Crop Protection accepts no liability for any losses that may result from the failure of Touchdown 008 to control resistant weeds. RATES Follow recommended rates for Touchdown 008 listed in the WEEDS CONTROLLED section. Use the higher label rates when weeds are dense or large. Also, use higher application volumes and pressures when weed vegetation is dense. '.

·11- WEEDS CONTROLLED Table 1: Annual Weed Control - Touchdown 008 Rates Touchdown 008'R;;t,,~ Fluid Ounces/A Maximum Weed Heif:lt/.:119th I Weed Species Scientific Name 3" 6" 12" 18"

---

Barley Hordeum vulgare 9 . - Barnyardgrass Echinochloa crus-galli 18 24

Bluegrass, annual Poa annua 9 Bluegrass, bulbous Poa bulbosa 12 -Brome, downy 1 Bromus tectorum 12 18 .. .-.- BJtlercup Ranunculus spp. 12 18 -~-- Canarygrass Phalaris canariensis 30

• . ! Cheat Bromus secalmus 12 I ! -- . ""--- Chickweed, common Stella ria media 12 ! ""-"" ---- Chickweed, mouseear Cerastium vulgatum 12 Cocklebur, common Xanthium strumarium 12 .. ~- .. Corn L Zea mays 12 Crabgrass Digitaria spp. 12 18 Dwarfdandelion, Krigia virginica 12 Virginia . Fall panicum Panicum 12 I dichotomiflorum _ .. .. Falseflax, smallseed Camelina microcarpa 12

---

Fiddleneck Amsinckia spp. 30 ... Filaree Erodium spp. 36 -"-,,-"".-"- Fleabane, hairy Conyza bonariensis 12 Florida pus ley Richardia scabra 24 Foxtail Setaria spp. 12 18 Goatgrass, jointed Aegilops cylindrica 12 • Goosefoot, netlleleaf Chenopodium murale 30 .. '--'"-- Groundcherry Physalis spp. 36 --------"" L. ...........• .._--"-- ""-- ---"""

-12-

Touchdown ri08-R2t~~ Fluid Ounces/A Maximum Weed Height1Length I Weed Species Scientific Name 3" 6" 12" 18"

Groundsel, common Senecio vulgaris 12 Henbit Lamium amplexicaule 12 Horseweed/Marestail 5 Conyza canadensis 12 Johnsongrass, Sorghum halepense 12 seedlina ! Kochia j Kochia scoparia 18 -".,,------- -- 24 ! Lambsquarters, Chenopodium album 12 i , common Morningglory -. -""""- -"-------- - Ipomoea spp_ 12

Mustard, blue Chorispora tene//a 9

Mustard, tansy Oescurainia pinnata 9

-'"""

Mustard, tumble Sisymbrium altissimum 9

Mustard, wild Sinapis arvensis 9

Nightshade Solanum spp. 36

-,,- ----- -

Oats Avena sativa 18 30 ! 36

Oats, wild Avena fatua 12

Panicum, Texas Panicum texanum 12 • Pennycress, field Thlaspi arvense 12 -,--- - Pigweed Amaranthus spp. 12

• _. - Prickly lettuce Lactuca serriola 18 24 Puncturevine Tribulus terrestris 24 36 I _. Pusley, Florida Richardia scabra 24 ! .. _- Rabbitfootgrass Polypogon 30 monspeliensis -"--- - Rocket, London Sisymbrium irio 12 Rockpurslane, Ca/andrinia caulescens 30 Redmaids -'"-,-, Rye Secale cereale 12 18
• ,---- Ryegrass, Lolium multiflorum 24 36 Italian/annual Sand bur, field Cenchrus incertus 12 18

---

-13- Weed Species Scientific Name Shattercane Sorghum bicolor Shepherdspurse Capsel/a bursa- pastoris Sowthistle, annual Sonchus ole race us Sprangletop Leptochloa spp. Spurge Euphorbia spp. Spurge, prostrate Euphorbia supina Stinkgrass Eragrostis cilianensis S'unflower, common He/ianthus anmJUs Wheat Triticum aestivum Wild buckwheat < Polygonum convolvulus Wild-proso millet Panicum mi/iaceum Witchgrass Panicum capillare 1 In no-till systems, use 18 fl. oz.lA. 2 Will not control glyphosate-tolerant volunteer corn. 3 Do not apply in the button stage. 4 Multiple applications may be required. Touchdown 008 Rates Fluid Ounces/A Maximum Weed Height/Length II 3" 6" 12" 18" 9 12 12 36 36 12 36 18 18 24 12 18 24 ----,--""""----- ""- 12 18 36 ""-'"-,---""'-" -"""'"- 18 srolerant biotypes can be controlled by Gramoxone® Max plus either 2,4-D or a ) triazine-based herbicide.

-14- Table 2: Annual Weed Control - Touchdown 008 Rates in a Tank Mix v!ith 0.25 Ibs. a.i.lA of Dicamba or 0.5 Ibs. a.i.lA of 2,4-D

• -"",. Weed Species Scientific Name Kochia (dicamba only) Kochia scoparia Lettuce, prickly Lactuca serriola Morningglory Ipomoea spp. Ragweed, common Ambrosia artemisiifolia Ragweed, giant Ambrosia trifida Smartweed, Pennsylvania Polygonum pensylvanicum Velvetleaf Abutilon theophrasti Cocklebur, common Xanthium strumarium Fleabane, rough Erigeron sfrigosus Horseweed/Marestail** Conyza canadensis Kochia Kochia scoparia Lambsquarters, common Chenopodium album Pigweed Amaranthus spp. Sunflower, common Helianthus annuus Thistle, Russian Salsola iberica -- ,- '"""-- Read and follow dicamba and 2,4-D labels. Maximum Height! Length 6" 12" Touchdown 008 Fluid Ounces/A ,18 . -- ... *Glyphosate tolerant biotypes can be controlled by Gramoxone Max plus eitile! : 4-D or a triazine-based herbicide.

15-

Table 3: Perennial Weed Control and Weed Management - Touchdown ODS Rates

Used Alone or in Tank Mix with 0.25 Ibs. a.i.lA of Oicamba or 0.5 Ibs. a.i./.t, of 2,4-0

_.

Spot

Scientific Spray %

Weed Species Name vfv QuartsfA

Alfalfa Medicago 1.5 0.75-1.5

sativa

Bindweed, field Convolvulus 1 3-3.75

arvensis

1.5

0.75-1.5

0.38

0.75-1.12

--Blueweed, He/ianthus 1.5 3-3.75

Texas cifiaris

---sromegrass, Bromus mermis 1.5 0.75-1.5

smooth

0.75-1.12

Johnsongrass Sorghum 0.75 0.38-2.25

halepense

0.38

Nightshade, Solanum 1.5 1.5

sliverleaf EJeagnifoJium

Tank Mix

with

2,4-D or

Dicamba

Yes

Yes

Yes

Application Timi .1. ~H1d Remarks

Jr rTlc'" after final

'f! 1:1: -: ,)<lYs after

At 6-8 inch St<'lf]C' (

cutting in fall. Dh

treatment. ---,.

At or after fio'/~:ml ~; I' ':Ju summer

for best results

At or after flowerlrl

multiple appllcatlol

:! f,,: uHltrol,

lS nld' be

required. Do not ;~

For suppression 0

;lp_l\ ,_,,"::.ir,'-__ -II

1\ Irrlu::t~:d

agricultural lewd, t, V qr,llJiid

equipment only, .I 'ppl\ Iii fall or

following harvest ( III I,; ,I',ers 12

inches or l1lort~ III

For suppressioll II

applications. Ap;-'I

" U', 'i:',.: or aerial

y' i)', ,11:- in fallow

and reduced til!ap' :,'y" ·'r~lS only.

Applications shoul

maximum emerge

and when vines ;'3!

inches in length

For partial control

crop renovation. ~;

are 4-12 inches.

Apply at or beyork

results, apply In I;]

d :',' ,:hyed until

rIC~~ I l'j occurred

t: ! ',~ ".\I,~en 6·18

'T'I ;lC :lr8 or hay

,:\1\ :;i1'_:11 plants

t"Ic,'(li"l. For best 1,: "II TI'rTer or fall, irn but before a kilL~:!~' Apply when most ~ ,1:1'11 ,rll:atthe boot to early s8cd For partial control h' :: C~~~'.:;l:"le".-, __ -I1 Iii '..,: He or hay crop renovatlol1. a Pp1i l, \ dctively growing plants 4".]. ~~ III i :.'s in heiqht e,v: ,:u and in Apply at boot to h the fall prior to frm -;!. l)'-,; 0.75-1.5 !"J0( c,"i',;tems. qts.lA for annU;:l1 Ii t .. Ci . (,-till acres. Use 1.5-2.25 qt,,'. Allow 3-7 days be! For burndown. <lP 12 inches in rlelgh before tillage. me 'i"!"'ol"e7-. -; __ -11 )1 ,'. ~Iants are t '1:.' (!i:()w 3 days i [,I, ilave Apply when 60':" c berries. Apply fall tn' ill I', ":,ts before a klilinq frost. _.,-----

-16- Tank Mix Spot with Scientific Spray % 2,4-0 or Weed Species Name v/v auarts/A Dicamba Aoolication TiminQ and Remarks Ryegrass, LoJium perenne 0.75 0.75-2.25 Apply 0.75-1.5 qts.fA when most perennial plants are in the boot to head stage or prior to frost. In non crop or areas where no tillage is practiced, use 1.5-2.25 qts.fA. Do not tank mix with residual herbicides when using the 0.75 qUA rate. Quackgrass Agropyron 1.5 0.75-1.5 Apply 0.75-1.5 qts.fA in annual repens cropping systems, or in pastures and sods where deep tillage is used. Do not tank mix with a residual herbicide at the 0.75 qt. rate. Spray when quackgrass is 6-8 inches in height. l Do not till between harvest and fall applications or in the fall or spring prior to spring application. Allow 3 or more days after application before tillaae. 1.5-2.25 Apply in pastures, sod, or non crop areas where deep tillage will not follow the application. Spray when quackgrass is at least 8 inches in heiaht. Spurge, leafy Euphorbia 1.5 0.38 Yes For suppression: greater than 12 esula inches tall in late summer. Thistle, Canada Cirsium 1.5 1.5-2.25 Apply when most plants are at or arvense beyond the bud stage of growth. After harvest, mowing, or tillage in the late summer or fall, allow at least 4 weeks for initiation of active growth and rosette development prior to application. Fall treatments must be applied before a killing frost. Allow 3 or more days before tillage. For fall applications or following mowing, allow a minimum of 6-8 inches rosette development. 0.38-0.75 Yes For suppression: apply in late summer or fall after harvest, mowing, or tillage. Allow rosette regrowth to be a minimum of 6 inches in diameter before treating. Allow 3 or more days before tillaqe. Wheatgrass, Agropyron 1.5 1.0-2.25 Boot to head. western smithii 1 Partial control.

-17-

MIXING PROCEDURES ------- ----- SPRAY ADDITIVES Ammonium Sulfate (AMS) - Control of annual and perennial weeds with TCll:chdown 008 may be improved by adding dry ammonium sulfate at 1-2% by weight or 25-17 Ibs.l100 gals. of water. In the High Plains where water sources contain Ceo /q. Mn levels exceeding 150 ppm, use a minimum of 8.5Ibs. AMS per 100 gallons o spray mixture. Liquid formulations of AMS may be used at an equivalent rate. Do nUl reduce use rates of Touchdown 008 when using AMS. Drift Control Agents - Drift control agents may be used with Touchdown OOH TANK MIXES WITH RESIDUAL HERBICIDES Reier to CROP USE DIRECTIONS section for recommended tank mixes_ ,,,:,i mixes of Touchdown 008 with other pesticides, fertilizers, or any other additives exc8,lj as specified on this label or other approved Syngenta supplemental labeling mClV 19Sult in tank mix incompatibility or unsatisfactory performance. It is recommended th2'. the compatibility of any tank mix combination be tested on a small scale such "s " 'ar test before actual tank mixing. Always refer to labels of other pesticide products for mixing directions and pr8Cclutions which may differ from those outlined here. Use in accordance with the most r,,:~trictive of label limitations and precautions. No label dosage rates may be exceeded This product cannot be mixed with any product containing a label prohibition agiJlr1s: such mixing. Tank Mixing Recommendations

1. Fill spray tank Y, full with clean water.
2. Begin tank agitation and continue throughout mixing and spraying.
3. Add AMS (if used).
4. Add dry formulations (WP, OF, etc.) to tank.
5. Add liquid formulations (SC, EC, L, etc.) to tank.
6. Add Touchdown 008.
7. Add nonionic surfactant/wetting agent (if used).
8. Fill remainder of spray tank.

-- ". ,---- "._--"" APPLICATION PROCEDURES TIMING Touchdown 008 should be applied to actively growing emerged weeds. Annuall'.'eeds of 6 inches or less in height are typically the easiest to control. Generally, mOI'f' effective control of perennial weeds is achieved at the flowering or seedheacl st,~~;e. Refer to the WEEDS CONTROLLED sections for specific application timing When annual weeds have been mowed or grazed, wait for 3-4 inches of new wowth to appear prior to application. When perennial weeds have been mowed or grazed ,lllow new growth to reach recommended stage prior to application. Visible effects on annual weeds occurs within 2-4 days after application; effects on perennial weeds may take 7 days or longer. Extremely cool or cloudy weather' k)'lmving treatment may slow activity. APPLICATION EQUIPMENT AND TECHNIQUES • Avoid drift. Applications should not be made in low level inversion conciitions, when winds are gusty or under any other conditions which favor drift. Inver'sions are characterized by stable air and increasing temperatures with height Cli,e,ve the ground. The applicator may detect the presence of an inversion by pruducing smoke and observing a smoke layer. Drift may cause damage to any ve(l!'tation contacted to which treatment is not intended. • Drift control additives may be used with Touchdown 008. Read and ful:Clv., the manufacturer's directions for use. • All equipment must be properly maintained and washed to remove produc: residues after use. SPRAY DRIFT INFORMATION Avoiding spray drift at the application site is the responsibility of the applicator. Ii Ie interaction of many equipment- and weather-related factors determine the potentia: for spray drift, The applicator and the grower are responsible for considering all the"" factors when making decisions. The following drift management requirements must be followed to avoid off-targe':: rift movement from aerial applications to agricultural field crops. These requirement CIO not apply to forestry applications, public health uses or to applications using d,y formulations.

-19-

1. The distance of the outer most nozzles on the boom must not exceed 3/4 the length of the wingspan or rotor.
2. Nozzles must always point backward parallel with the air stream and never be pointed downwards more than 45°. Where states have more stringent regulations, they shall be observed. The applicator should be familiar with and take into account the information covered in the Aerial Drift Reduction Advisory Information section below. Aerial Drift Reduction Advisory Information (This section is advisory in nature and does not supersede the mandatory label " requirements.) Information on Droplet Size The most effective way to reduce drift potential is to apply large droplets. The best drift management strategy is to apply the largest droplets that provide sufficient coverage and control. Applying larger droplets reduces drift potential, but will not prevent drift if applications are made improperly, or under unfavorable environmental conditions (see Wind, Temperature and Humidity, and Temperature Inversions). Controlling Droplet Size • Volume - Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with higher rated flows produce larger droplets. • Pressure - Do not exceed the nozzle manufacturer's recommended pressures. For many nozzle types lower pressure produces larger droplets. When higher flow rates are needed, use higher flow rate nozzles instead of increasing pressure. • Number of Nozzles - Use the minimum number of nozzles that provide uniform coverage. • Nozzle Orientation - Orienting nozzles so that the spray is released parallel to the airstream produces larger droplets than other orientations and is the recommended practice. Significant deflection from horizontal will reduce droplet size and increase drift potential. • Nozzle Type - Use a nozzle type that is designed for the intended application. With most nozzle types, narrower spray angles produce larger droplets. Consider using low-drift nozzles. Solid stream nozzles oriented straight back produce the largest droplets and the lowest drift.

Boom Length For some use patterns, reducing the effective boom length to less than 3/4 of the wingspan or rotor length may further reduce drift without reducing swath width. Application Height Applications should not be made at a height greater than 10 feet above the top of the largest plants unless a greater height is required for aircraft safety. Making Clpp!:':ation at the lowest height that is safe reduces exposure of droplets to evaporation anc' wind. Swath Adjustment When applications are made with a crosswind, the swath will be displaced dowmvind. Therefore, on the up and downwind edges of the field, the applicator must complcnsate for this displacement by adjusting the path of the aircraft upwind. Swath CldJlIstmflnt distance should increase, with increasing drift potential (higher wind, smaller clIC:'S, etc.). Wind Drift potential is lowest between wind speeds of 2-10 mph. However, many factors, including droplet size and equipment type determine drift potential at any given speed. Application should be avoided below 2 mph due to variable wind direction and 11I,)h inversion potential. Note: Local terrain can influence wind patterns. Every ,lpplic:Cltor should be familiar with local wind patterns and how they affect spray drift. Temperature and Humidity When making applications in low relative humidity, set up equipment to produce :arger droplets to compensate for evaporation. Droplet evaporation is most severe whf-,n conditions are both hot and dry. Temperature Inversions Applications should not occur during a temperature inversion because drift pote:::i,,1 is high. Temperature inversions restrict vertical air mixing, which causes small suspended droplets to remain in a concentrated cloud. This cloud can move in unpredictable directions due to the light variable winds common during inversions. Temperatlll'e inversions are characterized by increasing temperatures with altitude and are coillmon on nights with limited cloud cover and light to no wind. They begin to form as the·,un sets and often continue into the morning. Their presence can be indicated by ~F'lInd fog; however, if fog is not present, inversions can also be identified by the mo'iW 'fl'lt of smoke from a ground source or an aircraft smoke generator. Smoke that laym: : nd moves laterally in a concentrated cloud (under low wind conditions) indicate,; ill;

-21- inversion, while smoke that move upward and rapidly dissipates indicates good vertical air mixing. Sensitive Areas The pesticide should only be applied when the potential for drift to adjacent sensitive areas (e.g. residential areas, bodies of water, known habitat for threatened or endangered species, non-target crops) is minimal (e.g. when wind is blowing av.'"y from the sensitive areas). BROADCAST APPLICATIONS Ground: Applications should be made in 3-40 gallons of water per acre. When foliage is dense, spray volume should be increased to ensure coverage of the target weeds. Flat-fan nozzles will resuH in the most effective application of Touchdown ooe Spray boom and nozzle heights must be adjusted to provide coverage of ',lrget weed. Flood nozzles may result in reduced weed control due to inadequate coverage. Air: Applications should be made in 3-15 gallons of water per acre. Spray should be released at the lowest height consistent with effective weed control and flight safety. Applications more than 10 feet above the canopy should be avoicl"d. Use the largest droplet size consistent with good weed control. Formation of veil' small droplets may be minimized by appropriate nozzle selection, by orienting nozzle~ ,1way from the air stream as much as possible, and by avoiding inappropriate spray boom pressure. Solid stream or low shear nozzles may be utilized to reduce small clro:)let formation. These nozzles direct the fluid parallel to the existing airflow to redu=e shear effects. Other techniques may include reducing the fan angle of flat fan nozzle" if used, or reducing the deflector plate angle if deflector type nozzles are used. Ensure tile spray is released at an appropriate distance below the airfoil. For best results, each specific aerial application vehicle used should be quantiflilbly pattern tested for aerial application of Touchdown 008 herbicide initially and ever" year thereafter. To minimize drift, it is suggested aerial application equipment procluce the following minimum spray deposition characteristics: Volume Median Diameter (VMD) Volume Diameter (VD) {O.g}

400 microns 200 microns

-22- Prolonged exposure of Touchdown OOB to uncoated steel surfaces may result in corrosion and possible failure of the part. The maintenance of an organic coating (paint) which meets aerospace specification MIL-C-3B413 may prevent corrosion. To prevent corrosion of exposed parts, thoroughly wash aircraft after each day of spraying to remove residues of Touchdown OOB accumulated during spraying or from spills. Landing gear are most susceptible. SPOT TREATMENTS For annual weeds less than 6 inches, use a 0.3-0.5% v/v solution. For annual weeds over 6 inches, use a 0.5-1% v/v solution. Use a 0.75-1.5% v/v solution for most perennials (see Table 3 for specific rates and timing). When using motorized spot spray equipment (rider bar), use a 2.25% v/v solution. See Spot Spray Dilution Table below for rates of Touchdown OOB/volume of finished spray solution. Spray the solution on actively growing weeds until uniformly wet but not to the point of runoff. Retreat 14-21 days later if regrowth occurs. Touchdown 008 Herbicide Spot Spray Dilution Table To Make This Volume Solution Strength 1 gallon 10 gallons 25 gallons 100 gallons 0.3% 0.4 fl. oz. 3.B fl. oz. 0.6 pI. 1.2 qts. 0.5% 0.6 fl. oz. 6.4 fl. oz. 1 pts. 2 qts. 0.75% 1.0 fl. oz. 10 fl. oz. 1.5 pts. 3 qts. 1% 1.3 fl. oz. 13 fl. oz. 2 pts. 4 qts. 1.5% 2 fl. oz. 1.2 pts. 3 pts. 6 qts. 2.25% 2.9 fl. oz. 1.8 pts. 4.5 pts. 2.25 gals. Wiper Application Touchdown 008 may be applied using a wiper or "wick" applicator (e.g. rope, sponge, or porous plastic applicators) for selective control or suppression of annual and perennial weeds which become taller than the crop or desirable vegetation. Mix 3 quarts Touchdown 008 in 2 gallons of water unless directed otherwise in this label. Precautions should be taken to avoid contact with crops or desirable vegetation. Equipment should be operated at speeds of 5 mph or less. Use slower speeds where weeds are dense. For improved control, make two applications in opposite directions.

-23- /:P" CDA EQUIPMENT For control of annual weeds with hand held equipment, apply a 15% solution of Touchdown 008 at a flow rate of 2 fluid ounces per minute and a walking speed of 1.5 mph (0.75 qUA). For perennial weeds, use a 15-30% solution of Touchdown 008 at a flow rate of 2 ounces per minute and a walking speed of 0.75 mph (1.5-3 qts.lA) For vehicle mounted equipment, apply in 3-15 gallons of water per acre. Refer to the WEEDS CONTROLLED section for application rates and timing. Precautions should be taken to avoid contact with crops or desirable vegetation

CROP USE DIRECTIONS .- ... --.-------.-~~~--~~-
This section is organized alphabetically by crop categories. There may be several 
crops listed in a crop category. 
CONSERVATION COMPLIANCE/CONSERVATION RESERVE PROGRAM (CRP) 
Method of Application: Rotating out of CRP, site preparation (sequential herbicide 
applications), dormant beneficial plant management; postemergence; and wiper/wick. 
• Site Preparation: Prior to application, removal of excessive vegetation by 
grazing, mowing, burning, etc. may improve control. When annual weeds have 
been mowed or grazed, wait for 3-4 inches of new growth before application. 
When perennial weeds have been mowed or grazed, allow regrowth to reach 
recommended stage (see WEEDS CONTROLLED section (Table 3) for rates 
and timing). 
Sequential applications of Touchdown 008 and Gramoxone Max herbicides are 
effective in controlling established CRP grasses. Refer to the Gramoxow Max 
herbicide label for recommended rates and tank mixes. 
Touchdown 008/Gramoxone Max Herbicide Sequential Program: (Spring 
Application) 
Weed Species Program A Program B 
Fescue Gramoxone Max at 1.7-2.5 pts.lA Touchdown 008 at 1.5-2 (1 pts.lA 
Orchardgrass followed 7-10 days later with per followed 10-14 days later 
Ryegrass Gramoxone Max at 1.7-2.5 pts.lA with Gramoxone Max at 1.7 -2.5 
pts.lA -.,-
• Dormant Beneficial Plant Applications: Apply 9-12 fl. oz.lA in early sprin~; I-?fore 
desirable species, such as crested and tall wheatgrass, break dormancy. Late 
fall applications can be made after desirable grasses have reached dO"r:::c'Y If

-24-
perennial grasses are not dormant at time of application, stunting can occur. 
• Touchdown 008 may be tank mixed with other herbicides registered for tillS use 
such as atrazine, dicamba, and 2,4-D. 
• There are no rotational crop restrictions following application of Touchdown 008. 
Read and follow crop rotation label restrictions for all tank mix products. 
CORN (FIELD CORN, POPCORN, AND SEED CORN) 
Method of Application: Before, during, or after planting but before crop emergence; 
spot spray; and postharvest. 
Follow the directions listed in the APPLICATION DIRECTIONS, SPRAY ADDITIVES, 
and APPLICATION EQUIPMENT AND TECHNIQUES sections. Refer to the WEEDS 
CONTROLLED section for application rales and timing. 
General Use Precautions for Corn 
• Crop plants contacted by Touchdown 008 will be injured or killed. 
• 00 not use this product for weed control in sweet corn. 
• Spot application must be made prior to corn silking. 
Tank Mixtures for Corn 
For Control of Annual Weeds in a Residual Herbicide Tank Mix: Refer to the 
WEEDS CONTROLLED section (Tables 1 and 2) for Touchdown 008 application rates 
and timing. See residual herbicide label for appropriate rates to use in the tank mixture 
at this timing. 
For Control or Suppression of Perennial Weeds in a Residual Herbicide Tank Mix: 
Refer to the WEEDS CONTROLLED section (Table 3) for Touchdown 008 application 
rates and timing. Perennial weeds may require multiple applications for control. See 
residual herbicide label for appropriate rates to use in the tank mixture at this timing. 
UAN may be used as a carrier at 10-70 gals'/A with 2,4-0, dicamba, or any residual 
herbicides on the following list. Use 1-3 pts'/A Touchdown 008 when UAN is used as a 
carrier. For use with 2,4-0 and dicamba on annual and perennial weeds, consult Tables 
2 and 3. Reduced weed control may occur on certain weeds as a result of UAN foliar 
burn which can reduce uptake of Touchdown 008. Touchdown 008 can be tank mixed 
with the following products:

) 
J 
AAtrex® (atrazine) 
Ambush® 
Axiom® 
Balance® Pro 
Basis® 
Bicep Lite II MAGNUM® 
Bicep MAGNUM® 
Bicep II MAGNUM® 
Bullet® 
Callisto® 
Clarity® 
-25-
Dicamba 
Dual MAGNUM® 
Dual II MAGNUM® 
Frontier® 
Fultime™ 
Guardsman® 
Harness® 
Harness® Xtra 
Hornet™ 
Karate® 
Lasso® 
Lightning® 
Lorox® 
Marksman® 
Micro-Tech® 
Prowl® 
Princep® 
Surpass ™ EC 
Surpass 100 
Topnotch™ 
Warrior® 
2,4-D 
Refer to individual product labels for precautionary statements, restrictions, rates, and a 
list of weeds controlled. 
FALLOWLAND AND POSTHARVEST USES 
Method of Application: Chemical fallow; fallow beds; stale seedbeds; aid to tillage; 
and postharvest. 
Touchdown 008 may be applied by ground or air during the fallow period prior to 
planting or emergence of any crop listed on this label. There are no rotational crop 
restrictions in the spring following application of this product for postharvest use in the 
summer or fall of the previous year. 
Chemical Fallow· Ecofallow 
Touchdown 008 may be used in place of tillage to control annual weeds or volunteer 
wheat in fallow fields. Repeat applications may be necessary to control weeds 
emerging after application. Refer to Table 1 and 2 for use rates and timing. Broadcast 
or spot treatments of Touchdown 008 will control or suppress perennial weeds. Refer to 
Table 3 for use rates and timing. Follow directions listed in the APPLICATION 
DIRECTIONS, SPRAY ADDITIVES, and APPLICATION EQUIPMENT AND 
TECHNIQUES sections of this label. 
Tank mixes with 2,4-D or dicamba may be used for additional control of annual weeds 
listed in Table 2. Tank mixing with atrazine may provide residual control. 
Postharvest Chemical Fallow for Cereals 
Touchdown 008 may be applied after harvest to control newly emerged weeds, 
volunteer cereals, or weeds which were present at harvest. Allow sufficient time after 
harvest for weed regrowth to occur before making application. Refer to Table 1 and 2 
for use rates and annual weeds controlled. Repeat applications may be necessary for 
fall germinating weeds. Broadcast or spot treatments of Touchdown 008 will control or

-26-
suppress perennial weeds. Refer to Table 3 for use rates and timing. Follow directions 
listed in the APPLICATION DIRECTIONS, SPRAY ADDITIVES, and APPLICATION 
EQUIPMENT AND TECHNIQUES sections of this label. 
Tank mixes with 2,4-0 or dicamba may be used for additional control of weeds listed in 
Table 2. A postharvest tank mix with atrazine may be used if the field will be planted to 
corn or sorghum or laid fallow the following season. A tank mix with atrazine may be 
applied for residual control of certain annual weeds such as common lambsquarters, 
kochia, mustards, pigweeds, and volunteer wheat. Tank mixing with atrazine may result 
in reduced performance. 
Aid to Tillage 
Touchdown 008 may be used in conjunction with tillage operations in fallow systems to 
control cheat, downy brome, foxtails, tansy mustard, and volunteer cereals. Apply 5-10 
fl. oz'/A Touchdown 008 in 3-10 gallons of water per acre. Apply before weeds exceed 
6 inches in height. Application must be followed by tillage no later than 15 days after 
treatment or before weed regrowth. Allow at least one day after application before 
tillage. Tank mixes with residual herbicides may reduce performance. Follow directions 
listed in the APPLICATION DIRECTIONS, SPRAY ADDITIVES, and APPLICATION 
EQUIPMENT AND TECHNIQUES sections of this label. 
FARMSTEADS (NONCROP) 
Method of Application: General nonselective weed control, trim-and-edge, and 
chemical mowing. 
Applications can be made in noncrop areas on the farm such as: 
Barrier strips 
Oitchbanks (non-irrigation) 
Dry ditches and canals (non-irrigation) 
Equipment areas 
Farm buildings 
Farm roads 
Farmyards 
Fence rows 
Fuel storage areas 
Rights-of-way (utilities, railroad, and pipeline) 
Shelterbelts 
Soil bank land 
Follow directions listed in the APPLICATION DIRECTIONS, SPRAY ADDITIVES, and 
APPLICATION EQUIPMENT AND TECHNIQUES sections. Refer to the WEEDS, 
CONTROLLED sections for rates and timing. 
Tank Mixtures for Farmsteads 
Refer to the WEEDS CONTROLLED section (Tables 1 and 2 for annual weed control) 
for application rates and timing.

-27-
Refer to the WEEDS CONTROLLED section (Table 3 for perennial weed control) for 
application rates and timing. For tank mixtures with these products through backpack 
sprayers, handguns, or other high-volume spray-to-wet applications, see the 
Touchdown 008 Herbicide Spot Spray Dilution Table for recommended rates. 
Touchdown 008 can be tank mixed with the following products: 
Banvel® 
Direx® 
Diuron 
Princep® Caliber 90® 
Simazine 
Surfian™ 
2,4-D 
Refer to individual product labels for precautionary statements, restrictions, rates, and a 
list of weeds controlled. 
General Use Precautions for Farmsteads 
• Avoid contact with the foliage of ornamentals or other desirable plants. 
• Repeat applications may be necessary. 
GRASS SEED PRODUCTION 
Method of Application: Before, during, or after planting, but before crop emergence; 
renovation; site preparation; wiper/wick applicators; spot treatments; creating rows in 
annual ryegrass. 
Apply to turf or forage grass areas grown for seed production. Applications MUST be 
made prior to the emergence of the crop to avoid crop injury. For maximum control of 
existing vegetation, delay planting to determine if any regrowth from escaped 
underground plant parts occurs. Where repeat treatments are necessary, sufficient 
regrowth must be attained prior to application. For warm-season grasses, such as 
bermudagrass, summer or fall applications provide best control. 
Follow directions listed in the APPLICATION DIRECTIONS, SPRAY ADDITIVES, and 
APPLICATION EQUIPMENT AND TECHNIQUES sections. Refer to the WEEDS 
CONTROLLED section for rates and timing. 
General Use Precautions for Grass Seed Production 
• Do not disturb soil or underground plant parts before treatment. Tillage or 
renovation techniques such as vertical mowing, coring, or slicing should be 
delayed for 7 days after application to allow proper translocation into 
underground plant parts. 
• Do not feed or graze treated areas for 8 weeks following application.

_ ........... u,. "" 
-28-
• Vegetation contacted by Touchdown 008 will be injured or killed. 
• For spot treatments, apply prior to heading of grasses. 
WiperIWlck Applicators 
Mix 3 qts. Touchdown 008 in 2 gallons of water. Applicators should be adjusted so that 
the wiper contact point is at least 2 inches above the desirable vegetation. Weeds 
should be a minimum of 6 inches above the desirable vegetation. Better results may be 
obtained when more of the weed is exposed to the herbicide solution. Weeds not 
contacted by the herbicide solution will not be affected. This may occur in dense 
clumps, severe infestations, or when height of weeds varies so that not all weeds are 
contacted. In these instances, repeat treatments may be necessary. Better results may 
') be obtained if 2 applications are made in opposite directions. 
) 
PASTURES 
Touchdown 008 can be used on pastures of the following type: 
Bahiagrass 
Bermudagrass 
Bluegrass 
Bromegrass ... 
Fescue 
Orchardgrass 
Ryegrass 
Timothy 
Wheatgrass 
Method of Application: Before, during, or after planting but before emergence; 
renovation; spot spray; and wiperlwick. 
Follow directions listed in the APPLICATION DIRECTIONS, SPRAY ADDITIVES, and 
APPLICATION EQUIPMENT AND TECHNIQUES sections. 
",.;< 
. ,., 
For best results, remove domesticated livestock 14 days before treatment. Allow 2-6 
inches of new growth prior to treatment. 
To aid in renovation of pastures, Touchdown 008 may be applied at 8-48 oz.lA to 
dormant pastures. Applications of Touchdown 008 to green, nondormant plant tissue of 
desirable species will cause stunting, plant injury, or plant death. 
General Use Precautions for Pastures 
""~I"j , 
• Remove domestic livestock and wait 8 weeks before grazing or harvesting for 
forage and hay following preplant, preemergence, or pasture renovation 
applications. 
j ','

-29-
• If using spot or wiper/wick application, remove domestic livestock before 
application and wait 14 days before grazing or 37 days before harvesting for 
forage or hay. 
Tank Mixtures for Pastures 
Touchdown 008 can be tank mixed with the following herbicides for control or 
suppression of annual and perennial weeds provided that the tank mix product label 
allows use of the product: 2,4-D, dicamba. Refer to the WEEDS CONTROLLED 
section for application rates and timing. 
Refer to individual product labels for precautionary statements, restrictions, rates, 
approved uses, and a list of weeds controlled. 
) SMALL GRAINS 
Touchdown 008 may be used on the small grain crops listed below: 
Barley 
Oats 
Wheat (all) 
Method of Application: Before, during, or after planting, but before crop emergence; 
as a spot spray; postharvest; and wiper/wick (wheat only). 
Follow directions listed in the APPLICATION DIRECTIONS, SPRAY ADDITIVES, and 
APPLICATION EQUIPMENT AND TECHNIQUES sections. Refer to WEEDS 
CONTROLLED section for application rates and timing. 
General Use Precautions for Small Grains 
• Crop plants contacted by Touchdown 008 will be injured or killed. 
• For wiper/wick applications in wheat, allow at least 35 days between application 
and harvest. 
Tank Mixtures for PreplantlPreemergence Use for Small Grains 
Touchdown 008 can be tank mixed with the following herbicides for control or 
suppression of annual and perennial weeds: 2,4-D, dicamba. Under certain conditions, 
the mixture of Touchdown 008 with one or more herbicide tank mix combinations may 
result in a reduction of activity. 
Refer to individual product labels for precautionary statements, restrictions, rates, and a 
list of weeds controlled.

~~~~~~~~~~~~~~~~~~~ -~~~~~~~~----------
-30-
SORGHUM (MILO) 
Method of Application: Before, during, or after planting, but before crop emergence; 
spot spray; wiper/wick. 
Follow directions listed in the APPLICATION DIRECTIONS, SPRAY ADDITIVES. and 
APPLICATION EQUIPMENT AND TECHNIQUES sections. Refer to WEEDS 
CONTROLLED section for application rates and timing. 
General Use Precautions for Sorghum 
• Contact with sorghum foliage may result in crop injury. 
• Spot applications must be made before heading of milo. 
• Do not apply this product to sorghum grown for seed production. 
• Wiper and wick applications must be made 40 days before harvest. Do not feed 
or graze wiper/wick treated milo fodder. Do not ensile wiper/wick treated foliage. 
• Preharvest applications must be made at least 30 days prior to harvest With a 
maximum of 1.5Ibs. ae glyphosate (1.5 qts.Touchdown 008) per acre 
Tank Mixtures for Sorghum (PreplantJPreemergence) 
For Control of Annual Weeds in a Residual Herbicide Tank Mix: Refer to the 
WEEDS CONTROLLED section (Tables 1 and 2) for application rates and timing. 
For Control or Suppression of Perennial Weeds in a Residual Herbicide Tilnk Mix: 
Refer to the WEEDS CONTROLLED section (Table 3) for application rates and timing. 
Perennial weeds may require multiple applications for control. Touchdown 008 can be 
tank mixed with the following products: 
AAtrex (atrazine) 
Bicep Lite II MAGNUM 
Bicep II MAGNUM 
Dicamba 
Dual II MAGNUM 
Frontier 
Guardsman 
Karate 
Prowl 
Warrior 
Refer to individual product labels for precautionary statements, restrictions, rates and a 
list of weeds controlled. 
Preharvest (Texas and Oklahoma Only) 
For weed control and desiccation of sorghum, apply 0.75-3 pts.lA. Apply in 3·3[' c;allons 
of water per acre by ground or in 3-15 gallons of water per acre by air.

--31-
Apply after most of the heads have matured. Apply when grain moisture is 30% or less. 
Development of immature heads will be interrupted and yield potential will be affected 
when applications are made too early. Delay harvest until at least 30 days after 
treatment. Do not apply a preharvest treatment on sorghum grown for seed as a 
reduction in germination or vigor may occur. 
Postharvest 
Following harvest, apply 1.5 pts.lA for control or 1 pt./A for suppression of regrowth of 
harvested sorghum stubble. For best results, control of weeds clipped at harvest is 
improved if allowed to develop new leaves prior to application. Refer to Weed Tables 
for specific recommendations. 
SOYBEANS 
Method of Application: Before planting and postharvest. 
Follow directions listed in the APPLICATION DIRECTIONS, SPRAY ADDITIVES. and 
APPLICATION EQUIPMENT AND TECHNIQUES sections. Refer to WEEDS 
CONTROLLED section for application rates and timing. 
General Use Precautions for Soybeans 
• Soybeans will be injured or killed when contacted with Touchdown 008. 
• To avoid soybean injury, preemergence applications should be made 5 days 
prior to planting. 
Tank Mixtures for Soybeans (PreplantiPreemergence) 
For Control of Annual Weeds in a Residual Herbicide Tank Mix: Refer to the 
WEEDS CONTROLLED section (Tables 1 and 2) for application rates and timing. 
For Control or Suppression of Perennial Weeds in a Residual Herbicide Tank Mix: 
Refer to the WEEDS CONTROLLED section (Table 3) for application rates and timing. 
Perennial weeds may require multiple applications for control.

-32-
Touchdown 008 can be tank mixed with the following products: 
Authority® Dual MAGNUM Prowl Steel® 
Authority ™ Broadleaf Dual II MAGNUM Pursuit® Warrior 
BoundaryTM Fi rstrate ™ Pursuit® Plus 2,4-D 
Broadstrike® Flexstar® Reflex® 2,4-DB 
Canopy® Frontier Scepter® 
Canopy XL® Lasso Sencor® 
Command® Lorox Squadron® 
Refer to individual product labels for precautionary statements, restrictions, rates, and a 
list of weeds controlled. 
) This product is sold only for uses stated on its label. 
AAtrex®, Ambush®, Bicep MAGNUM®, Bicep Lite II MAGNUM®, Bicep II MAGNUM®, 
BoundaryTM, Callisto™, Dual MAGNUM®, Dual II MAGNUM®, Flexstar®, Gramoxone® 
Max, Karate®, Princep®, Princep® Caliber 900, Reflex®, Touchdown® 008, Warrior® 
and the Syngenta logo are trademarks of a Syngenta Group Company 
Authority®, Basis®, Canopy®, and Canopy XL® trademarks of E. I. duPont de Nemours 
& Company 
AuthorityTM Broadleaf and Command® trademarks of FMC Corporation 
Axiom®, Balance® Pro, and Sencor trademarks of Bayer CropScience 
Banvel® trademark of Micro Flo Company 
) , Broadstrike®, Firstrate™, Fultime™, HorneFM, Surfian™, Surpass™ EC, and 
Topnotch™ trademarks of Dow AgroSciences 
Bullet®, Harness®, Harness® Xtra, Lasso®, Micro-Tech®, RRTM, Roundup Ready® 
trademarks of Monsanto Company 
Clarity®, Frontier®, Guardsman®, Lightning®, Marksman®, Prowl®, Pursuit®, Pursuit® 
Plus, Scepter®, Squadron®, and Steel® trademarks of BASF Ag Products 
Direx® and Lorox® trademarks of Griffin LLC

-33-
©2003 Syngenta 
For non-emergency (e.g., current product information), call 
___ ... SYflf:lenta Crop Protec:ti()fl at 1-800-334-9481. 
Syngenta Crop Protection, Inc. 
Greensboro, North Carolina 27409 
www.syngenta-us.com 
SCP 
TOUCHDOWN CT 12·08·03 CLEAN - pd - 12/08/03 
0001 00,xxxxx.2003.0715B.TOUCHDOWN.CT.071503.NEWLABEL.008.pdf 
J

-34-
Container Label 
Touchdown® 008 
Herbicide 
GROUP HERBICIDES 
Nonselective Foliar Systemic Herbicide for Weed Control in or on Conservation Reserve 
Programs (CRP), Corn (Except Sweet Corn), Fallowland and Postharvest Uses, 
Farmsteads, Grass Seed Production, Pastures, Small Grains, Sorghum, and Soybeans 
Active Ingredients: 
*Glyphosate, N-(phosphonomethyl) glycine, in the form of the potassium salt. ..... 43.5% 
**Dicamba, 3,6-dichloro-o-anisic-acid ............................................................ . 
Other Ingredients: 
Total: 
*Contains 4 pounds per U.S. gallon of glyph os ate acid. 
**Contains 0.72 pounds per U.S. gallon of dicamba. 
KEEP OUT OF REACH OF CHilDREN. 
CAUTION 
See additional precautionary statements and directions for use inside booklet. 
AGRICULTURAL USE REQUIREMENTS 
... 0.6% 
55.9% 
100.0% 
Use this product only in accordance with its labeling and with the Worker Protection 
Standard, 40 CFR part 170. Refer to supplemental labeling under "Agricultural Use 
Requirements" in the Directions for Use section for information about this standard. 
_ gallons [2.5 gallons] 
Net Contents 
_ gallons [Bulk] 
Net Contents

) 
,) 
-35-
-=-:=c=-::,-,-:-:=::-::-:--::-=:-:-::-=-:-==c:-=-::------------------ --
PRECAUTIONARY STATEMENTS 
Hazards to Humans and Domestic Animals 
CAUTION 
Causes moderate eye irritation. Avoid contact with eyes or clothing. Wash thoroughly 
with soap and water after handling. 
-----
FIRST AID 
If in eyes: • Hold eye open and rinse slowly and gently with water for 15-20 
minutes. 
• Remove contact lenses, if present, after the first 5 minutes, then 
continue rinsing eye. 
, • Call a poison control center or doctor for treatment advice. -----
If on skin or • Take off contaminate clothing. 
clothing: • Rinse skin immediate.fy with plenty of water for 15-20 minutes. 
• Call a poison control Center or doctor for treatment advice. 
If • Call a poison control center or doctor immediately for treatment 
swallowed: advice. 
• Have person sip a glass of water if able to swallow. 
• Do not induce vomiting unless told to do so by a poison control 
center or doctor. 
. 
• Do not give anythinQ by mouth to an unconscious person . ---
If inhaled: • Move person to fresh air. 
• If person is not breathing, call 911 or an ambulance, then give 
artificial respiration, preferably mouth-to-mouth if possible. 
• Call a poison control center or doctor for further treatment advice. 
Have the product container or label with you when calling a poison control center or 
doctor, or going for treatment. 
HOT LINE NUMBER 
For 24 Hour Medical Emergency Assistance (Human or Animal) 
Or Chemical Emergency Assistance (Spill, Leak, Fire or Accident), 
Call 
1-800-888-8372 
. 
Personal Protective Equipment (PPE) 
Applicators and other handlers must wear: 
• long sleeved shirt and long pants 
• socks and shoes 
• chemical-resistant gloves (Category A), such as barrier laminate, butyl rubber .:;:14 
mils, nitrile rubber .::14 mils, neoprene rubber .:;:14 mils, natural rubber .:;:14 mils, 
polyethylene, polyvinyl chloride (PVC) .:;:14 mils, or viton .:;:14 mils

-36-
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions 
for washables, use detergent and hot water. Keep and wash PPE separately from other 
laundry. 
Engineering Control Statements 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets 
the requirements listed in the Worker Protection Standard (WPS) for agricultural 
pesticides [40 CFR 170.240(d) (4-6)], the handler PPE requirements may be reduced or 
modified as specified in the WPS. 
User Safety Recommendations 
Users should: 
• Wash hands before eating. drinking, chewing gum, using tobacco, or using the toilet. 
• Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put 
on clean clothing 
• Remove PPE immediately after handling this product. Wash the outside of gloves 
before removing. As soon as possible, wash thoroughly and change into clean 
clothinq. 
Environmental Hazards 
Do not apply directly to water or to areas where surface water is present or to intertidal 
areas below the mean high water mark. Do not contaminate water when cleaning 
equipment or disposing of equipment wash waters. 
Physical and Chemical Hazards 
Do not store, mix or apply this product or spray solutions of this product in unlined steel 
(except stainless steel), galvanized steel containers, or sprayer tanks. This product or 
spray solutions of this product will react with these containers and tanks and produce 
hydrogen gas which may form a highly combustible mixture. This gas mixture could 
flash or explode, causing serious personal injury, if ignited by spark, open flame, lighted 
cigarette, welder torch, or other ignition source. 
Spray solutions of this product should be mixed, stored and applied using only stainless 
steel, aluminum, fiberglass, plastic, or plastic-lined steel containers.

-37-
[Bulk) 
CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY 
NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation of 
Warranty and Liability before buying or using this product. If the terms are not 
acceptable, return the product at once, unopened, and the purchase price will be 
refunded. ------------------------' 
The Directions for Use of this product should be followed carefully. It is impossible to 
eliminate all risks inherently associated with the use of this product. Crop injury, 
ineffectiveness or other unintended consequences may result because of such factors 
as manner of use or application, weather or crop conditions, presence of other materials 
or other influencing factors in the use of the product, which are beyond the control of 
SYNGENTA CROP PROTECTION, Inc. or Seller. All such risks shall be assumed by 
Buyer and User, and Buyer and User agree to hold SYNGENTA and Seller harmless for 
any claims relating to such factors. 
SYNGENTA warrants that this product conforms to the chemical description on the label 
and is reasonably fit for the purposes statM ~n the Directions for Use, subject to the 
inherent risks referred to above, when used in accordance with directions under normal 
use conditions. This warranty does not extend to the use of the product contrary to 
label instructions, or under abnormal conditions or under conditions not reasonably 
foreseeable to or beyond the control of Seller or SYNGENTA, and Buyer and User 
assume the risk of any such use. SYNGENTA MAKES NO WARRANTIES OF 
MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE NOR ANY 
OTHER EXPRESS OR IMPLIED WARRANTY EXCEPT AS STATED ABOVE. 
In no event shall SYNGENTA or Seller be liable for any incidental, consequential or 
special damages resulting from the use or handling of this product. THE EXCLUSIVE 
REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY OF 
SYNGENTA AND SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR 
DAMAGES (INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, 
CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) 
RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SHALL BE THE 
RETURN OF THE PURCHASE PRICE OF THE PRODUCT OR, AT THE ELECTION 
OF SYNGENTA OR SELLER, THE REPLACEMENT OF THE PRODUCT. 
SYNGENTA and Seller offer this product, and Buyer and User accept it, subject to the 
foregoing Conditions of Sale and Limitations of Warranty and of Liability, which may not 
be modified except by written agreement signed by a duly authorized representative of 
SYNGENTA.

... '. 
-38-
STORAGE AND DISPOSAL 
Do not contaminate water, food, or feed by storage or disposal. 
Pesticide Storage 
Keep container closed to prevent spills and contamination. 
Pesticide Disposal 
Wastes resulting from the use of this product may be disposed of on site or at an 
appro~ed waste disposal facility. 
) . ContainerDls~osal [2.5 galionJ 
'\.. ' . 
Triple rinse (or equivalent). Then offer for recycling or reconditioning, or puncture and 
dispose of Ina'sanitary landfill or by incinceration, or, if allowed by state and local 
authorities, by burning. If bumed, stay out of smoke. 
:~~!i,' :~i;',~~,;;::;! "';', ";:1"" 
Container Disposal [Bulk/Minl-SulkJ 
'. 'I ~:;i~''-;''·''!liu\£j.y',,'J~~Ili:';1 :,~~,\",' .' I', 
:',rl,'; ',:">'!~~1it :~I'~r:f'" ',"::~!" - E' "'''', 
Reseal container and offer for reconditioning, or triple rinse (or equivalent) and offer for 
recycling or reeonditioning; or clean in accordance with manufacturer's instructions. 
"';:J'Ii:'~I"""""'~'''' 
\'~I' ' , , 
For Recyclable/Refillable Containers: 
Before refilling', inspect thoroughly for damage such as cracks, punctures, bulges, 
dents, abrasions, and damaged or worn threads on closure devices. After filling and 
. before transporting, check for leaks. Do not refill or transport damaged or leaking 
container. ':',i,' 
:),,'" , ' 
t ,C~~T~I:~,~;~&:i>,l'~~:~.i~?~,FOOD, FEED, OR DRINKING WATER! 
I"; 
©2003 Syngenta". 
Syngenta Crop Protection, Inc. 
Greensboro, North Carolina 27409 
www.syngenta-us.com 
TOUCHDOWN CT 12-08-03 CLEAN - pd - 12108103 
000100-)()()()()(.2003.0715B.TOUCHDOWN.CT.071503.NEWLABEL.008.pdf