crop-chem-docs/corpus/epa_ppls/19713-252.md

# SIMAZINE 90DF

- EPA Reg No: **19713-252**
- Registrant: DREXEL CHEMICAL COMPANY
- Signal word: Caution
- Active ingredients: Simazine (90%)
- Label accepted: 2021-11-10
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/019713-00252-20211110.pdf

---
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY 
 WASHINGTON, DC 20460 
 
 
 
OFFICE OF CHEMICAL SAFETY 
AND POLLUTION PREVENTION 
 
 
November 10, 2021 
 
 
Luz G. Chan 
Registration Manager 
Drexel Chemical Company 
P.O. Box 13327 
Memphis, TN 38113-0327 
 
Subject: Registration Review Label Amendments for Simazine Incorporating Mitigation 
Measures from the Interim Decision and the Technical Registrants’ Commitments 
for the Endangered Species Act (ESA) Biological Evaluation 
 Product Name: SIMAZINE 90DF 
 EPA Registration Number: 19713-252 
 Application Date: 10/09/2020 
Decision Number: 566844 
 
Dear Ms. Chan: 
 
The Agency, in accordance with the Federal Insecticide, Fungicide and Rodenticide Act 
(FIFRA), as amended, has completed reviewing all the information submitted with your 
application to support the Registration Review of the above referenced product in connection 
with the Simazine Interim Decision and with the technical registrants’ commitments for the ESA 
Biological Evaluation. The Agency has concluded that your submission is acceptable. The label 
referred to above, submitted in connection with registration under FIFRA, as amended, is 
acceptable. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please be 
aware that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide 
Act and is subject to review by the Agency. If the website is false or misleading, the product 
would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40 
CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In addition, 
regardless of whether a website is referenced on your product’s label, claims made on the 
website may not substantially differ from those claims approved through the registration process. 
Therefore, should the Agency find or if it is brought to our attention that a website contains false 
or misleading statements or claims substantially differing from the EPA approved registration, 
the website will be referred to the EPA’s Office of Enforcement and Compliance. 
 
A stamped copy of your labeling is enclosed for your records. This labeling supersedes 
all previously accepted labeling. You must submit one copy of the final printed labeling 
before you release the product for shipment with the new labeling. In accordance with 40

Page 2 of 2 
EPA Reg. No. 19713-252 
Decision No. 566844 
 
CFR 152.130(c), you may distribute or sell this product under the previously approved 
labeling for 18 months from the date of this letter. After 18 months, you may only 
distribute or sell this product if it bears this new revised labeling or subsequently 
approved labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and its 
implementing regulation at 40 CFR 152.3. 
 
If you have any questions about this letter, please contact Anna Senninger at 
Senninger.Anna@epa.gov
. 
 
 
 Sincerely, 
 
 
 
Kelly Sherman 
Chief, Risk Management and Implementation 
 Branch III (RMIB III)
 
Pesticide Re-Evaluation Division 
Office of Pesticide Programs 
U.S. Environmental Protection Agency 
 
 
Enclosure

Page 1 of 19
For weed control in certain crops and ornamental plantings.
ACTIVE INGREDIENT:
Simazine ............................................................................................................................. 90.0%
OTHER INGREDIENTS: ................................................................................................... 10.0%
TOTAL: .............................................................................................................................. 100.0%
This product is a water-dispersible granule.
KEEP OUT OF REACH OF CHILDREN
CAUTION
[See FIRST AID Below]
[See FIRST AID Below]
[See Side (Back) Panel for FIRST AID]; [See Page ___ for FIRST AID]
[See Container Labeling for (FIRST AID and) Complete Directions for Use]
[See (Attached) Booklet (Container Labeling) for Complete Directions for Use]
EPA Reg. No. 19713-252
EPA Est. No. XXXXX-XX[X]-X Net Content: ______Lb. (_____Kg)
FIRST AID
IF ON SKIN OR CLOTHING:
• Take off contaminated clothing.
• Rinse skin immediately with plenty of water for 15 to 20 minutes.
• Call a poison control center or doctor for treatment advice.
IF INHALED:
• Move person to fresh air.
• If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth-to-mouth, if 
possible.
• Call a poison control center or doctor for further treatment advice.
IF SWALLOWED:
• Call a poison control center or doctor immediately for treatment advice.
• Have person sip a glass of water if able to swallow.
• Do not induce vomiting unless told to do so by a poison control center or doctor.
• Do not give anything by mouth to an unconscious or convulsing person.
IF IN EYES:
• Hold eye open and rinse slowly and gently with water for 15 to 20 minutes.
• Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye.
• Call a poison control center or doctor for treatment advice.
Have the product container or label with you when calling a poison control center or doctor, or going for treatment. 
You may also call CHEMTREC at 800-424-9300 for emergency medical treatment information.
252SP-0421*P
SIMAZINE GROUP 5 HERBICIDE
 Simazine 90DF
 Herbicide
11/10/2021
19713-252

Page 2 of 19 
 
PRECAUTIONARY STATEMENTS
Hazards to Humans and Domestic Animals
CAUTION: Harmful if absorbed through skin or inhaled. Avoid contact with skin, clothing, or eyes. Avoid 
breathing dust. Harmful if swallowed. Causes moderate eye irritation.
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Mixers and loaders supporting groundboom applications must wear: Coveralls over long-sleeved 
shirt and long pants; chemical-resistant footwear plus socks; waterproof gloves ; chemical-resistant 
apron; and wear a minimum of a NIOSH-approved particulate filtering facepiece respirator with any N*,
R or P filter OR a NIOSH-approved elastomeric particulate respirator with any N*, R or P filter OR a
NIOSH-approved powered air purifying respirator with HE filter.
Mixers/loaders/applicators for backpack application to Grapefruit and Oranges must wear: Shoes, 
Socks, Coveralls worn over long-sleeve shirts and long pants, and waterproof gloves.
All other mixers, loaders, applicators, and handlers must wear: Long-sleeved shirt and long pants, 
shoes plus socks, and waterproof gloves.
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables 
exist, use detergent and hot water. Keep and wash PPE separately from other laundry.
Discard clothing and other absorbent materials that have been drenched or heavily contaminated with 
this product’s concentrate. Do not reuse them.
Applications made by mechanically pressurized handguns to strawberries are restricted to either spot 
treatment only or mixer/loader/applicators are required to wear shoes, socks, coveralls worn over long 
sleeve shirt and long pants, and waterproof gloves.
ENGINEERING CONTROLS
When handlers use enclosed cabs in a manner that meets the requirements listed in the Worker 
Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-5)], the handler PPE
requirements may be reduced or modified as specified in the WPS.
USER SAFETY RECOMMENDATIONS
Users should: 1) Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. 
2) Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean 
clothing. 3) Remove PPE immediately after handling this product. Wash the outside of gloves before 
removing. As soon as possible, wash thoroughly and change into clean clothing.
ENVIRONMENTAL HAZARDS
Simazine can travel (seep or leach) through soil and can enter ground water which may be used as drinking 
water. Simazine has been found in ground water. Users are advised not to apply Simazine to sand and 
loamy sand soils where the water table (ground water) is close to the surface and where these soils are 
very permeable; i.e., well-drained. Your local agricultural agencies can provide further information on the 
type of soil in your area and the location of ground water. 
This pesticide is toxic to aquatic invertebrates. Do not apply directly to water, to areas where surface water 
is present, or to intertidal areas below the mean high water mark. Runoff and drift from treated areas may 
be hazardous to aquatic organisms in neighboring areas, Do not contaminate water when disposing of 
equipment washwater. 
Product must not be mixed or loaded within 50 feet or intermittent streams and rivers, natural or impounded 
lakes and reservoirs. Product must not be applied within 66 feet of points where field surface water runoff 
enters perennial or intermittent streams and rivers or within 200 feet of natural or impounded lakes and 
reservoirs. If this product is applied to highly erodible land, the 66-foot buffer or setback from runoff entry 
points must be planted to crop, or seeded with grass of other suitable crops. Product must not be mixed or 
loaded, or used within 50 feet of all wells, including abandoned wells, drainage wells, and sinkholes. 
Operations that involve mixing, loading, rinsing, or washing of this product into or from pesticide handling 
or application equipment or containers within 50 feet of any well are prohibited, unless conducted on an 
impervious pad constructed to withstand the weight of the heaviest load that may be positioned on or moved 
across the pad. Such a pad shall be designed and maintained to contain any product spills or equipment 
leaks, container or equipment rinse or washwater, and rain water that may fall on the pad. Surface water

Page 3 of 19 
 
shall not be allowed to either flow over or from the pad which means the pad must be self-contained. The 
pad shall be sloped to facilitate material removal. An unroofed pad shall be of sufficient capacity to contain 
at a minimum 110% of the capacity of the largest pesticide container or application equipment on the pad. 
A pad that is covered by a roof of sufficient size to completely exclude precipitation from contact with the 
pad shall have a minimum containment of 100% of the capacity of the largest pesticide container or 
application equipment on the pad. Containment capacities as described above shall be maintained at all 
times. The above-specified minimum containment capacities do not apply to vehicles when delivering 
pesticide to the mixing/loading sites.
Additional State imposed requirements regarding well-head setbacks and operation containment must be 
observed.
One of the following restrictions must be used in applying Simazine to tile-outletted terraced fields 
containing standpipes:
• Do not apply within 66 feet of standpipes in tile-outletted terraced fields.
• Apply this product to the entire tile-outletted terraced field and immediately incorporate it to a depth of 2 
to 3 inches in the entire field.
• Apply this product to the entire tile-outletted terraced field under a no-till practice only when a high crop 
residue management practice is practiced. High crop residue management is described as a crop
management practice where little or no crop residue is removed from the field during and after crop 
harvest.
NON-TARGET ORGANISMS ADVISORY STATEMENT
This product is toxic to plants and may adversely impact the forage and habitat of non-target organisms, 
including pollinators in areas adjacent to the treated site. Protect the forage and habitat of non-target 
organisms by following label directions intended to minimize spray drift.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
ANY USE OF THIS PRODUCT IN AN AREA WHER E USE IS PROHIBITED IS A VIOLATION OF 
FEDERAL LAW.
ENDANGERED SPECIES
It is a Federal offense to use any pesticide in a manner that results in an unauthorized “take” (e.g., kill or 
otherwise harm) of an endangered species under the Endangered Species Act section 9. When using 
this product, you must follow the measures contained in the Endangered Species Protection Bulletin for 
the area in which you are applying the product. You must obtain a Bulletin no earlier than six months 
before using this product. To obtain Bulletins, consult http://www.epa.gov.espp/, call 1-844-447-3813, or 
email ESPP@epa.gov. You must use the Bulletin valid for the month in which you will apply the product.
Before using this product, you must consult the Simazine Watershed Information Center (SWIC) to 
determine whether the use of this product is prohibited in your watershed. SWIC can be accessed through 
www.Simazine-watershed.info or 1-888-365-2874. If the SWIC indicates that use of this product is 
prohibited in your watershed, you may return this product to your point of purchase or contact Drexel 
Chemical Company for a refund.
Failure to follow the “DIRECTIONS FOR USE” and “USE PRECAUTIONS AND RESTRICTIONS” on 
this label may result in crop injury, poor weed control and/or illegal residues.
Do not apply this product through any type of irrigation system. Do not apply this product in a way that will 
contact workers or other persons, either directly or through drift. Only protected handlers may be in the area 
during application. For any requirements specific to your State or Tribe, consult the agency responsible for 
pesticide regulation.
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard (WPS), 40 
CFR Part 170. This standard contains requirements for the protection of agricultural workers on farms,

Page 4 of 19 
 
forests, nurseries, greenhouses and handlers of agricultural pesticides. It contains requirements for 
training, decontamination, notification and emergency assistance. It also contains specific instructions 
and exceptions pertaining to the statements on this label about Personal Protective Equipment (PPE) 
and restricted entry interval (REI). The requirements in this box only apply to uses of this product that 
are covered by the WPS. 
For Christmas trees, do not enter or allow worker entry into treated areas during the REI of 48 hours. For 
all other crops and use patterns, do not enter or allow worker entry into treated areas during the REI of
12 hours.
Exception: If the product is soil-injected or soil-incorporated, the WPS, under certain circumstances, 
allows workers to enter the treated area if there will be no contact with anything that has been treated.
PPE required for early entry to treated areas that is permitted under the WPS and that involves contact 
with anything that has been treated, such as plants, soil or water is: Coveralls, shoes plus socks and 
waterproof gloves.
NON-AGRICULTURAL USE REQUIREMENTS
The requirements in this box apply to uses of this product that are NOT within the scope of the WPS for 
agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce
agricultural plants on farms, forests, nurseries or greenhouses. 
Do not enter or allow others (including children or pets) to enter treated areas until sprays have dried.
USE INFORMATION
IMPORTANT: Read the entire “DIRECTIONS FOR USE” and the “WARRANTY—CONDITIONS OF SALE” 
before using this product.
Apply this herbicide before weeds emerge or after removal of weed growth. This product controls a wide 
variety of annual Broadleaf and Grass weeds when used at selective rates in agricultural crops and
ornamental plantings. Where a range of application rates is given, use the low rate on coarser textured soil 
and soil lower in organic matter; use the high rate on finer textured soil and soil higher in organic matter.
To avoid spray drift, do not apply under windy conditions. Avoid spray overlap, as crop injury may result. 
Since this product enters weeds mainly through their roots, moisture is needed to move it into the root zone. 
Very dry soil conditions and lack of rainfall following application may necessitate shallow cultivation. This 
product is noncorrosive to equipment, non-flammable and has low electrical conductivity.
USE SITE RESTRICTION
Not for use in the States of Alaska, Hawaii or in the U.S. territories (American Samoa, Guam North
Mariana Islands, Puerto Rico and the U.S Virgin Islands).
WEED RESISTANCE MANAGEMENT
For resistance management, this product is a Group 5 mode of action herbicide. Any weed population may contain or 
develop plants naturally resistant to this product and other Group 5 mode of action herbicides. The resistant biotypes 
may dominate the weed population if these herbicides are used repeatedly in the same field. Appropriate resistance 
management strategies should be followed.
To delay herbicide resistance, take one or more of the following steps:
xRotate the use of this product or other Group 5 herbicides within a growing season sequence or among growing 
seasons with different herbicide groups that control the same weeds in a field. 
xUse tank mixtures with herbicides from a different group if such use is permitted; where information on resistance in 
target weed species is available, use the less resistance-prone partner at a rate that will control the target weed(s) 
equally as well as the more resistance-prone partner. Consult your local extension service or certified crop advisor if 
you are unsure as to which active ingredient is currently less prone to resistance. 
xAdopt an integrated weed-management program for herbicide use that includes scouting and uses historical 
information related to herbicide use and crop rotation, and that considers tillage (or other mechanical control 
methods), cultural ( e.g., higher crop seeding rates; precision fertilizer application method and timing to favor the crop 
and not the weeds), biological (weed-competitive crops or varieties) and other management practices. 
xScout after herbicide application to monitor weed populations for early signs of resistance development. Indicators 
of possible herbicide resistance include: (1) failure to control a weed species normally controlled by the herbicide at 
SIMAZINE GROUP 5 HERBICIDE

Page 5 of 19 
 
the dose applied, especially if control is achieved on adjacent weeds; (2) a spreading patch of non-controlled plants 
of a particular weed species; (3) surviving plants mixed with controlled individuals of the same species. If resistance 
is suspected, prevent weed seed production in the affected area by an alternative herbicide from a different group or 
by a mechanical method such as hoeing or tillage. Prevent movement of resistant weed seeds to other fields by 
cleaning harvesting and tillage equipment when moving between fields and planting clean seed. 
xIf a weed pest population continues to progress after treatment with this product, discontinue use of this product, and 
switch to another management strategy or herbicide with a different mode of action, if available. 
xContact your local extension specialist or certified crop advisors for additional pesticide resistance-management 
and/or integrated weed-management recommendations for specific crops and weed biotypes. 
xFor further information or to report suspected resistance, contact Drexel Chemical Company representatives at (901) 
774-4370.
ANNUAL WEEDS CONTROLLED
Alyssum
Annual bluegrass
Annual morningglory
Annual ryegrass
Barnyardgrass
(Watergrass)
Burclover
Carelessweed
Carpetweed
Common chickweed
Crabgrass (Digitaria spp.)
Downy brome (Cheatgrass)
Fall panicum
Fiddleneck
Filaree
Fireweed
Fivehook bassia
Flora’s paintbrush
Florida pusley
Foxtails
Goosegrass
Groundsel
Henbit
Junglerice
Knawel (German moss)
Common lambsquarters
Nightshade
Pepperweed
Pigweed
Pineappleweed
Prickly lettuce
Common purslane
Ragweed
Rattail fescue
Redmaids
Russian thistle
Shepherdspurse
Signalgrass (Brachiaria spp.)
Silver hairgrass
Smartweed
Spanishneedles
Speedwell
Tansymustard
Wild mustard
Wild oats
Witchgrass
Yellowflower pepperweed
APPLICATION PROCEDURES
Ground Application: Use conventional ground sprayers equipped with nozzles that provide accurate and 
uniform application. Be certain that nozzles are uniformly spaced and the same size. Calibrate sprayer 
before use and recalibrate at the start of each season and when changing carriers. Unless otherwise 
specified, use a minimum of 20 gallons of spray mixture per acre.
Use a pump with capacity to 1) maintain 15 to 45 psi at nozzles, 2) provide sufficient agitation in tank to 
keep mixture in suspension, and 3) to provide a minimum of 20% bypass at all times. Use centrifugal
pumps which provide propeller shear action for dispersing and mixing this product. The pump should 
provide a minimum of 10 gallons per minute per 100 gallon tank size circulated through a correctly 
positioned sparger tube or jets.
Use screens to protect the pump and to prevent nozzles from clogging. Screens placed on suction side of 
pump should be 16-mesh or coarser. Do not place a screen in the recirculation line. Use 50-mesh or coarser 
screens between the pump and boom, and where required, at the nozzles. Check nozzle manufacturer’s 
recommendations.
For band applications, calculate amount to be applied per acre as follows:
band width in inches X broadcast rate = amount needed
row width in inches per acre per acre
USE RESTRICTIONS 
x Applications made by mechanically pressurized handguns are restricted to spot treatment only for the 
following uses: Berry and Small fruits (Blackberries, Blueberries, Cranberries, Grapes, Loganberries, 
Lowbush blueberries, Raspberries); Citrus (Grapefruit, Lemons, Oranges); Nursery Ornamentals; Pome 
fruits (Apples, Pears); Stone fruits (Cherries [sweet, tart], Nectarines, Peaches, Plums); Tree Nuts

Page 6 of 19 
 
(Almonds, Filberts, Macadamia nuts, Pecans, Walnuts); Tropical and Subtropical fruits (Avocados, 
Olives); Sweet corn. 
x Applications made by mechanically pressurized handguns to Strawberries are restricted to either spot 
treatment only OR mixers/loaders/applicators ar e required to wear shoes, socks, coveralls worn over 
long sleeve shirts and long pants, and waterproof gloves.
x Aerial Application - Application by air is prohibited.
MANDATORY SPRAY DRIFT MANAGEMENT 
SPRAY DRIFT
GROUND BOOM APPLICATIONS:
x User must only apply with the release height recommended by the manufacturer, but no more than 4 feet 
above the ground or crop canopy.
x Applicators are required to use a coarse or coarser droplet size (ASABE S572).
x Do not apply when wind speeds exceed 10 mph at the application site.
x Do not apply during temperature inversions.
x User must maintain a 15 foot (4.6 m) in-field downwind buffer (in the direction in which the wind is blowing) 
from the edge of streams and rivers as well as the high-tide line for all estuarine/marine environments.
SPRAY DRIFT ADVISORIES
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT.
BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS.
IMPORTANCE OF DROPLET SIZE
An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide target pest control. 
While applying larger droplets will reduce spray drift, the po tential for drift will be greater if applications are made 
improperly or under unfavorable environmental conditions.
Controlling Droplet Size - Ground Boom
• Volume- Increasing the spray volume so that larger droplets are produced will reduce spray drift. Use the highest 
practical spray volume for the application. If a greater spray volume is needed, consider using a nozzle with a 
higher flow rate.
• Pressure- Use the lowest spray pressure recommended for the nozzle to produce the target spray volume and 
droplet size.
• Spray Nozzle- Use a spray nozzle that is designed for the intended application. Consider using nozzles designed to 
reduce drift.
BOOM HEIGHT – GROUND BOOM
For ground equipment, the boom should remain level with the crop and have minimal bounce.
SHIELDED SPRAYERS 
Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify that the 
shields are not interfering with the uniform deposition of the spray on the target area.
TEMPERATURE AND HUMIDITY
When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation.
TEMPERATURE INVERSIONS
Drift potential is high during a temperature inversion. Temperature inversions are characterized by increasing 
temperature with altitude and are common on nights with limited cloud cover and light to no wind. The presence of an 
inversion can be indicated by ground fog or by the movement of smoke from a ground source or an aircraft smoke 
generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an 
inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing. 
WIND
Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND CONDITIONS.
Applicators need to be familiar with local wind patterns and terrain that could affect spray drift.

Page 7 of 19 
 
HANDHELD TECHNOLOGY APPLICATIONS
Take precautions to minimize spray drift.
MIXING PROCEDURES:
All Uses: 1) Be sure sprayer is clean and not contaminated with any other materials or crop injury or sprayer 
clogging may result. 2) Fill tank one-fourth full with clean water, nitrogen solution or complete fluid fertilizer. 
3) Start agitation. 4) Be certain that the agitation system is working properly and creates a rippling or rolling 
action on the liquid surface. 5) Pour product directly from bag into tank. 6) Continue filling tank until 90% 
full. Increase agitation, if necessary, to maintain surface action. 7) Add tank mix herbicide(s) after this 
product is thoroughly suspended. 8) Finish filling tank. Maintain agitation to avoid separation of materials. 
9) Empty tank as completely as possible before refilling to prevent buildup of emulsifiable concentrate 
residue from possible tank mix herbicides. 10) If an emulsifiable concentrate film starts to build up in tank, 
drain it and clean with strong detergent solution or solvent. 11) Clean sprayer thoroughly immediately after 
use by flushing system with water containing a detergent.
COMPATIBILITY TEST: To determine the tank mix compatibility of this product with liquid fertilizer, crop 
oil, spreaders or recommended pesticides, use this test method. Nitrogen solutions or complete fluid 
fertilizers may replace all or part of the water in the spray in Corn. Since liquid fertilizers can vary, even 
within the same analysis, check compatibility each time before use. Be especially careful when using 
complete suspension or fluid fertilizers as serious compatibility problems are more apt to occur.
Commercial application equipment may improve compatibility in some instances. Check compatibility using 
the following procedure:
1. Add 1 pint of fertilizer to each of 2 one-quart glass jars with tight lids.
2. To one of the jars, add one-fourth teaspoon of a compatibility agent approved for this use (one-fourth 
teaspoon is equivalent to 2 pt./100 gal. of spray). Cap and shake until mixed. Examples of compatibility 
agents include Compex
®, MIX™, and Unite®.
3. To both jars, add the appropriate amount of herbicide(s). If more than one herbicide is used, add them 
separately with dry herbicides first, flowables next and emulsifiable concentrates last. After each 
addition, cap and shake until thoroughly mixed.
The appropriate amount of herbicides for this test follows (assuming a spray volume of 25 gal./A):
Dry Herbicides: For each pound per acre, add 1.5 tsp. to each jar. Fluff up wettable 
powder products before measuring.
Liquid Herbicides: For each pint per acre, add 0.5 tsp. to each jar.
For a spray volume other than 25 gallons per acre, change the teaspoons added to each jar as 
follows:
25 gallons × number of teaspoons given above = teaspoons to
desired gallons of spray volume per acre add to each jar
4. After adding all ingredients, put lids on and tighten. Shake jars vigorously for one minute. Let the mixtures 
stand for 15 minutes and then look for separation, large flakes, precipitates, grease, gels, medium to 
heavy oily film on the jar or other signs of incompatibility. Determine if the compatibility agent is needed 
in the spray mixture by comparing the two jars. If either mixture separates, but can be remixed readily, 
the mixture probably can be sprayed as long as good agitation is used. If the mixtures are incompatible, 
test the following methods of improving compatibility: (a) slurry the dry herbicide(s) in water before 
additions, or (b) add one-half of the compatibility agent to the fertilizer and the other half to the emulsifiable 
concentrate or flowable herbicide before addition to the mixture. If still incompatible, do not use the 
materials mixed in the same spray tank.
PERENNIAL CROP REPLANTING
To avoid crop injury, observe the following precautions:

Page 8 of 19 
 
If replanting Perennial crops, do not apply this product in the year preceding planting of these crops.
FRUIT AND NUT CROPS
Apply the spray to the orchard or vineyard floor avoiding contact with fruit, foliage or stems. Specified rates 
are based on broadcast treatment. For band applications or spot applications around Fruit or Nut trees, 
reduce the broadcast rate of this product and water per acre in proportion to the area actually sprayed.
Use Precautions and Restrictions (All Fruit and Nut Crops). (To avoid crop injury): 1) Apply only to 
orchards or groves where trees have been established 12 months or more unless specified differently. 2) 
Make only one application per year, except as noted otherwise. 3) Do not use on Gravelly, Sand or Loamy 
sand soil. 4) Immediately following application, limit overhead sprinkler irrigation to 0.5 inch.
ALMONDS, NECTARINES, PEACHES (CA Only)
1.1 to 2.2 pounds of this product per treated acre must be applied in a 2 to 4 feet band on each side of the 
tree row before weeds emerge in late Fall or early Winter. Weeds controlled by 1.1 pounds of this product 
include Burclover, Common chickweed, Shepherdspurse and Wild mustard. Apply only once per year.
Use Precautions and Restrictions: 1) Do not apply more than 2 pounds a.i. (2.2 lb. of this product) per 
acre per calendar year. 2) Do not apply more than once per calendar year. 3) Do not treat trees established
in the grove less than 3 years. 4) Do not treat the Mission (Texas variety) variety of Almonds. 5) Do not 
apply to Almond trees propagated on Plum rootstocks. 6) Do not replant Almonds, Nectarines or Peaches 
in treated soil for 12 months after treatment. 7) Do not apply on soil with less than 1% organic matter. 8) 
Do not treat areas where water will accumulate.
APPLES, PEARS, TART CHERRIES
Apply 2.2 to 4.4 pounds of this product per acre.
Use Precautions and Restrictions: 1) Do not apply more than 4 pounds a.i. (4.4 lb. of this product) per 
acre per calendar year. 2) Do not apply more than once per calendar year. 3) For Apples, the preharvest 
interval is 150 days.
AVOCADOS (CA and FL Only)
Apply 2.2 to 4.4 pounds of this product per acre after final preparation of grove.
Use Precautions and Restrictions: 1) Do not apply more than 4 pounds a.i. (4.4 lb. of this product) per 
acre per calendar year. 2) Do not apply more than once per calendar year. 3) Do not apply on Gravelly 
sand or Loamy sand soil.
BLUEBERRIES AND CANEBERRIES
(Blackberries, Boysenberries, Loganberries, Raspberries)
Apply 2.2 to 4.4 pounds of this product per acre in the Spring or as a split application of 2.2 pounds per 
acre in the Spring plus 2.2 pounds per acre in the Fall in a minimum of 40 gallons of water per acre.
On plantings less than 6 months old, use half the above rate. To control Quackgrass, apply 4.4 pounds per 
acre in the Fall or split the application applying 2.2 pounds per acre in the Fall plus 2.2 pounds per acre in 
the Spring, when Quackgrass is actively growing.
Use Precautions and Restrictions: 1) Do not apply more than 4 pounds a.i. (4.4 lb. of this product) per 
acre per calendar year. 2) Do not apply more than twice per calendar year. 3) To avoid illegal residues, do 
not apply when fruit is present.
CRANBERRIES
MA: Apply up to 4.4 pounds of this product per acre either before Spring growth begins or in the Fall after 
harvest. Other areas: Apply 2.2 pounds per acre before Spring growth begins.

Page 9 of 19 
 
Use Precautions and Restrictions: 1) In MA, do not apply more than 4 pounds a.i. (4.4 lb. of this product) 
per acre per calendar year. In all other areas, do not apply more than 2 pounds a.i. (2.2. lb. of this product)
per calendar year. 2) Do not apply more than once per calendar year.
FILBERTS
Apply 2.2 to 4.4 pounds of this product per acre in the Fall or apply a split application of 2.2 pounds per 
acre in the Fall plus 2.2 pounds per acre in the Spring.
Use Precautions and Restrictions: 1) Do not apply more than 4 pounds a.i. (4.4 lb. of this product) per 
acre per calendar year. 2) Do not apply more than twice per calendar year. 3) If trees are planted on a 
hillside, excessive soil erosion may result from the elimination of weeds. 4) Do not apply when Nuts are on 
the ground during the harvest period or illegal residues may result.
GRAPES
Apply 2.2 to 4.4 pounds of this product per acre any time between harvest and early Spring.
Use Precautions and Restrictions: 1) Do not apply more than 4 pounds a.i. (4.4 lb. of this product) per 
acre per calendar year. 2) Do not apply more than twice per calendar year. 3) Do not use in vineyards 
established less than three years or crop injury may occur.
GRAPEFRUIT, LEMONS, ORANGES
AZ (Lemons and Oranges only): Apply a split application of 1.75 pounds of this product per acre in the 
Spring plus 1.75 pounds in the Fall.
Use Precautions and Restrictions: 1) Do not apply more than 1.6 pounds a.i. (1.75 lb. of this product) 
per acre per application. 2) Do not apply more than 3.2 pounds a.i. (3.5 lb. of this product) per acre per 
calendar year. 3) This product can be applied once during the Fall and once during the Spring.
CA (Grapefruit, Lemons, Oranges): Apply 2.2 to 4.4 pounds of this product per acre in a single application 
or apply 2.2 pounds per acre in the Fall and 2.2 pounds per acre in the Spring.
Use Precautions and Restrictions: 1) Do not apply more than 4 pounds a.i. (4.4 lb. of this product) per 
acre per calendar year. 2) Do not apply more than twice per calendar year. 3) Do not use in the Imperial,
Coachella or Palo Verde Valleys or crop injury may occur.
FL (Grapefruit and Oranges only): Broadcast 4.4 pounds of this product to weed-free soil once during 
the Spring and/or once during the Fall to control weeds expected to emerge during these periods.
Apply prior to emergence of weeds. If weeds have emerged, apply in tank mixture with a contact herbicide. 
Use precaution to keep the treatment off of the foliage, fruit or trunk of Citrus trees.
Use Precautions and Restrictions: 1) Do not apply more than 4 pounds a.i. (4.4 lb. of this product) per 
acre per application. 2) Do not apply more than 8 pounds a.i. (8.8 lb. of this product) per acre per year. 3) 
This product can be applied once during the Fall and once during the Spring.
For control of difficult weeds such as Balsamapple and Spanishneedles, and for partial control of Honeyvine 
milkweed, apply no more than 8.8 pounds of this product as a single application in the Spring as a 50% 
band application. The amount of this product applied per acre of field must not exceed 4 pounds a.i. (4.4 
lb. of this product). Apply once in the Spring growing season between January and April. Do not make a 
Fall application of this product if this treatment was used in the Spring. When emerged weeds are present, 
apply this product in tank mixture with a recommended contact herbicide. Follow all directions, precautions, 
limitations, etc. on the tank mix product.
TX (Grapefruit and Oranges only): Apply up to 4.4 pounds of this product per acre.
Use Precautions and Restrictions: 1) Do not apply more than 4 pounds a.i. (4.4 lb. of this product) per 
acre per calendar year. 2) Do not apply more than twice per calendar year.
USE PRECAUTIONS AND RESTRICTIONS (ALL AREAS TO AVOID CROP INJURY): 1) Do not use in 
nurseries. 2) Do not apply to bedded Grapefruit, Lemons or Oranges [except for FL Grapefruit and 
Oranges]. 3) Do not apply to trees under stress from freeze damage for one year after the freeze. 4) Do not 
exceed 4.4 pounds of this product per acre per year on grove planted trees 1 year old or less.
Note: Dark-red Grapefruit hybrids, e.g. “Star Ruby”, have a higher risk of crop injury than non-dark-red 
types.

Page 10 of 19 
 
MACADAMIA NUTS
Apply 2.2 to 4.4 pounds of this product in 50 gallons of water per acre before harvest and just prior to weed 
emergence.
Use Precautions and Restrictions: 1) Do not apply more than 4 pounds a.i. (4.4 lb. of this product) per 
acre per calendar year. 2) Do not apply more than once per calendar year. 3) To avoid illegal residues, do 
not apply when nuts are on the ground during the harvest period.
OLIVES
Apply 2.2 to 4.4 pounds of this product per acre following grove preparation in the Fall. Repeat annually in 
mid-Winter.
Use Precautions and Restrictions: 1) Do not apply more than 4 pounds a.i. (4.4 lb. of this product) per 
acre per calendar year. 2) Do not apply more than once per calendar year.
PEACHES, PLUMS, SWEET CHERRIES
Apply 1.75 to 4.4 pounds of this product per acre in late Fall to early Spring prior to weed emergence.
Use Precautions and Restrictions: 1) Peaches: Use only in AR, LA, MO, OK, TX and states East of the 
Mississippi River to avoid crop injury.
For CA, see specific directions in the section “ALMONDS, NECTARINES AND PEACHES [CA ONLY]”. Do 
not apply more than 4 pounds a.i. (4.4 lb. of this product) per acre per calendar year. Do not apply more 
than once per calendar year. 2) Plums and Sweet Cherries: Use only in MO and states East of the 
Mississippi River, except TN to avoid crop injury. Do not apply more than 4 pounds a.i. (4.4 lb. of this
product) per acre per calendar year. Do not apply more than once per calendar year.
PECANS
Apply 2.2 to 4.4 pounds of this product per acre before weeds emerge in the Spring.
Use Precautions and Restrictions: 1) Do not apply more than 4 pounds a.i. (4.4 lb. of this product) per 
acre per calendar year. 2) Do not apply more than once per calendar year. 3) Do not use West of the Pecos
river in TX, or in AZ, CA, or NM. 4) Do not make applications to transplanted trees that have been 
established less than two years in the grove to avoid crop injury. 5) To avoid illegal residues, do not apply
when nuts are on the ground. 6) Do not allow animals to graze treated areas.
STRAWBERRIES (OR and WA Only)
For control of Chickweed, Groundsel, Mustard and Shepherdspurse, broadcast 1.1 pounds of this product 
per acre. In fields where overhead irrigation is used to activate this product, apply after harvest at time of 
bed renovation. In fields where overhead irrigation is not available, apply during early October through 
November.
Use Precautions and Restrictions: 1) Do not apply more than 1 pound a.i. (0.9 lb. of this product) per 
acre per calendar year. 2) Do not apply more than once per calendar year. 3) Make only one application 
per growing season. 4) Do not apply within 4 months after transplanting.
WALNUTS
Apply 2.2 to 4.4 pounds of this product per acre. Leveling and furrowing operations after application will 
lessen effectiveness of weed control.
Use Precautions and Restrictions: 1) Do not apply more than 4 pounds a.i. (4.4 lb. of this product) per 
acre per calendar year. 2) Do not apply more than once per calendar year. 3) To avoid illegal residues, do 
not apply when nuts are on the ground.
TANK MIXING OR SEQUENTIAL APPLICATION

Page 11 of 19 
 
When tank-mixing or sequentially applying Simazine and/or Atrazine or products containing either active 
ingredient, the total pounds of Simazine and/or Atrazine applied must not exceed the specified maximum
rate per calendar year.
TANK MIX COMBINATIONS FOR FRUIT AND NUT CROPS
TANK MIXTURE WITH BROMACIL 80W FOR GRAPEFRUIT AND ORANGES (FL Only): This product 
tank mixed with Bromacil 80W will control Balsamapple, Black nightshade, Carpetweed, Crabgrass,
Cudweed, Dayweed, Florida pusley, Horseweed, Pepperweed, Pigweed, Poorjoe, Ragweed, Rattlebox, 
Spanishneedles and Sandbur. This mixture will also give partial control of Bermudagrass, Bahiagrass,
Pangolagrass, Paragrass and Torpedograss. Apply 4.4 pounds of this product plus the specified label rate 
of Bromacil 80W per acre beneath trees in a minimum of 40 gallons of water per acre before or soon after
weed growth begins. Use precaution to keep the spray off of the foliage, fruit or trunk of Citrus trees. 
Temporary yellowing of Citrus leaves may occur following treatment.
Follow use and precautionary directions on the Bromacil label.
Use Precautions and Restrictions (To avoid crop injury): 1) Do not use in nurseries or where trees are 
under stress from freeze damage for one year after the freeze. 2) Do not use on soil with less than 1%
organic matter or on poorly drained soil. 3) Do not treat trees planted in irrigation furrows. 4) Do not treat 
diseased trees such as those with foot rot. 5) Do not use in groves interplanted with other trees or desirable 
plants, nor in home Grapefruit or Orange plantings or in areas where roots of other valuable plants or trees 
may extend. 6) Treated areas may be planted to Citrus trees one year after application. 7) Do not rotate to 
other crops within two years after application.
To avoid illegal residues, apply only once per year and avoid contact with foliage and fruit with spray or 
mist.
TANK MIXTURE WITH GRAMOXONE
®: This combination is effective in the following Fruit and Nut crops 
for kill of existing vegetation and for residual control of the annual Broadleaf and Grass weeds claimed for 
this product applied alone. This combination is also effective for top-kill and suppression of perennial weeds. 
In FL, this mixture may be applied in Spring or Fall to emerged weeds.
Use this tank mixture on the following crops:
Almonds (CA Only)
Apples
Avocados (CA & FL1 Only)
Cherries (Tart & Sweet2)
Filberts
Grapefruit (CA & TX Only)
Grapes
Lemons (AZ & CA Only)
Macadamia nuts
Olives
Oranges3
Peaches4
Pears
Pecans
Plums2
Walnuts
SPECIFIC DIRECTIONS: Apply the rate given under the appropriate crop on this label plus the specified 
labeled rate of Gramoxone in 50 to 200 gal. (30 to 50 gal. for Pecans) of water per acre to the orchard 
floor avoiding contact with fruit, foliage or stems. Add a nonionic surfactant at 0.5 pt./100 gal. of spray. 
Apply when weeds are succulent and new growth is 1 to 6 inches tall. For mature Woody weeds or 
difficult to control Perennial weeds, retreat or spot treat with Gramoxone if regrowth occurs.
Add this product to the spray tank first (refer to "MIXING PROCEDURES” section of this label), then add 
Gramoxone and add the surfactant last. Provide constant agitation during mixing and application to keep 
the mixture in suspension.
Refer to the labels of both products for further directions, specific weeds controlled and precautions and 
limitations on each crop.
1 In Avocados in FL, this tank mix also controls Balsamapple vine, Rattail amaranth. At the higher specified rate of 
each herbicide, it suppresses Coral vine.
2 Limited to MO and states East of the Mississippi River, except TN.
3 In Oranges in FL, apply 4.4 lb. of this product per acre per application. Do not exceed 8.8 lb. of this product per 
calendar year.
4 Limited to AR, CA. LA, MO, OK, TX and states East of the Mississippi River.
As appropriate, refer to the sections: “ALMONDS, NECTARINES AND PEACHES (CA ONLY)” or “PEACHES, 
PLUMS AND SWEET CHERRIES” for the rate of this product and other information.

Page 12 of 19 
 
Use Precautions and Restrictions (To avoid crop injury):
1) Apply the tank mix only once per year. 2) Use shield for young trees or vines.
TANK MIXTURE WITH IMITATOR® PLUS OR ROUNDUP® OR TOUCHDOWN® BRAND HERBICIDES
This tank mixture is effective in Grape vineyards and in the following bearing or non-bearing tree crops for 
control of existing vegetation and for residual control of the annual Broadleaf and Grass weeds claimed for 
this product applied alone. This combination is also effective for partial control of perennial weeds contacted 
by the spray mixture during application.
Use this tank mixture on the following crops:
Almonds**
(CA Only)
Apples*
Avocados*
(CA & FL Only)
Cherries
(Tart & Sweet****
1)
Filberts**
Grapefruit***
(CA, FL & TX)
Grapes*
Lemons*
(AZ & CA Only)
Macadamia nuts**
Oranges***
(AZ, CA, FL & TX)
Peaches****
2
Pears*
Pecans**
Plums****
1
Walnuts**
SPECIFIC DIRECTIONS: Use the specified rate given elsewhere on this label for this product applied 
alone to the crop being treated. Add to the spray tank the specified rate of Roundup or Imitator Plus or 
Touchdown brand product per acre depending on weeds present and their growth stage. Also, add an 
agriculturally approved nonionic surfactant at 0.5% by volume of spray solution. Apply the mixture in 10
to 40 gal. of water per acre as a post-emergence spray to the weeds at the appropriate weed growth 
stage given on the Roundup or Imitator Plus label. Add this product to the spray tank first, then add 
Roundup or Imitator Plus or Touchdown brand herbicides. Provide constant agitation during mixing and 
application to keep the mixture in suspension. Refer to “APPLICATION PROCEDURES” section of this 
label for further directions. Refer to labels of both herbicides for further directions, specific weeds 
controlled, precautions and limitations on each crop.
USE PRECAUTIONS AND RESTRICTIONS (To avoid crop injury): Take extreme care to avoid contact 
of herbicide solution, spray, drift or mist with foliage or green bark of trunk, branches, suckers, fruit, or 
other parts of trees or vines. Observe use precautions on both this product and Roundup or Imitator Plus 
or Touchdown labels for each crop involved.
* Allow a minimum of 14 days between last application and harvest.
** Allow a minimum of 21 days between last application and harvest of these crops.
*** Allow a minimum of 1 day between last application and harvest of these crops.
**** Allow a minimum of 17 days between last application and harvest of these crops.
1 Plums and Sweet cherries: Limited to MO and states East of the Mississippi River, except TN.
2 Limited to AR, CA, LA, MO, OK, TX and states East of the Mississippi River. For CA, see specific 
directions in the section “ALMONDS, NECTARINES AND PEACHES (CA ONLY)”
TANK MIXTURE WITH SOLICAM®
For improved control of such weeds as Clover, Cutleaf eveningprimrose, Dandelion, Henbit, Horseweed or
Marestail, Lambsquarters and Puncturevine, apply this product in tank mixture with Solicam DF on the 
following crops:
Grapefruit Lemons Oranges
SPECIFIC DIRECTIONS: Apply the specified rate of this product from the use section on this label plus 
the specified rate of Solicam DF Herbicide (78.6% active ingredient) in 20 to 100 gal. of water per acre. 
This product plus Solicam may be applied in tank mixture with Gramoxone or Roundup or Imitator Plus. 
Follow the labeled directions and restrictions of use on labels of herbicides used in mixtures with this 
product.
Use Precautions and Restrictions (To avoid crop injury): Keep this product plus Solicam mixtures 
from contacting foliage, fruits and stems of Citrus trees during spraying.

Page 13 of 19 
 
TANK MIXTURE WITH SURFLAN®
Use this tank mixture in the following crops for pre-emergence control of all weeds claimed on 
both labels:
Almonds
Apples
Avocados
Caneberries
Cherries
Filberts
Grapefruit
Grapes
Lemons
Oranges
Peaches
Pears
Pecans
Plums
Walnuts (English)
SPECIFIC DIRECTIONS: Apply the rate given for this product under the appropriate crop on this label 
plus the specified rate of Surflan 75W or Surflan A.S. in 20 to 40 gal. of water per acre. Refer to the
Surflan 75W or Surflan A.S. label for complete tank mix directions. Observe all precautions and 
limitations on this label and Surflan labels.
FIELD AND FORAGE CROPS
CORN (Field, Sweet)
Apply a maximum of 2 pounds a.i. (2.2 lb. of this product) per acre as a single pre-emergence application 
on soils that are not highly erodible or on highly erodible soils, as defined by the Natural Resources 
Conservation Service, if at least 30 % of the soil is covered with plant residues. If a second treatment is 
required following an earlier herbicide application, the total Simazine applied may not exceed 2.5 pounds
a.i. (2.7 lb. of this product) per acre per calendar year.
Apply a maximum of 1.6 pounds a.i. (1.7 lb. of this product) as a single pre-emergence application on highly 
erodible soils if <30% of the soil is covered with plant residues.
Pre-grazing/Pre-harvest Interval:
1. Field corn – 60 days
2. Sweet corn – 45 days
Nitrogen solutions or complete fluid fertilizers may replace all or part of the water as a carrier in the spray. 
Determine the physical compatibility of this product with fertilizer before use.
Refer to the “USE INFORMATION” section of this label for a compatibility test. Do not apply after Corn has 
emerged as there is danger of liquid fertilizers causing crop injury.
PRE-EMERGENCE: Apply before weeds and Corn emerge. Use the appropriate rate specified above.
PRE-PLANT: Apply in the Spring after plowing as broadcast at the appropriate rate specified above. Apply 
before, during or after final seedbed preparation. If soil is tilled or worked after application, avoid deep 
incorporation. Best results will be obtained when this product is applied within 2 weeks before planting. 
Under dry weather conditions, pre-plant applications may give better weed control. If weeds develop, 
particularly under relatively dry conditions, a shallow cultivation will generally result in better weed control.
To control Quackgrass: Apply this product as broadcast per acre using the rates specified above during 
the Fall. Plow two to three weeks later, or if erosion is a problem, delay plowing until Spring.
WINTER ANNUAL BROADLEAF CONTROL
PRE-EMERGENCE FALL APPLICATION: For pre-emergence control of Winter annual weeds such as 
Annual bluegrass, Common chickweed, Downy brome, Henbit, Shepherdspurse, Tansymustard, Wild
mustard and others, broadcast 1.1 pounds of this product per acre of this product after harvest of the 
preceding crop and prior to weed emergence on land to be planted to Corn the following year. A tillage
operation may precede the application. Do not apply to frozen ground. If this product is used in the Fall 
Corn weed program, do not exceed 1.67 pounds of this product pre-emergence in the Spring.
Use Precautions and Restrictions: 1) Do not apply more than 2.77 pounds of this product per acre to 
Corn per calendar year. 2) Do not rotate to any crop except Corn until the following year or injury may occur. 
3) After harvest, plow and thoroughly till the soil in Fall or Spring to minimize possible injury to Spring-
seeded rotational crops, regardless of the rate used. 4) Do not apply pre-plant incorporated in Corn in the 
High Plains and Intermountain areas of the West (including Central and Western KS, Western NE, Western 
OK and the Panhandle of TX) where rainfall is sparse and erratic or where irrigation is required. 5) In the

Page 14 of 19 
 
High Plains and Intermountain areas of the West where rainfall is sparse and erratic or where irrigation is 
required, use this product to control weeds in Corn only when Corn is to follow Corn or when a crop of 
untreated Corn is to precede another rotational crop. 6) Injury may occur to Soybeans planted in North-
Central and Northwest IA, South-Central and Southwest MN, Northeast NE, Southeast SD and other areas 
the year following application on soils having a calcareous surface layer. 7) Do not plant Sugar beets, 
Tobacco, Vegetables (including Dry beans), Spring-seeded small grains or Small-seeded legumes and 
Grasses the year after an application or injury may occur.
Note: Do not graze treated areas or illegal residues may result.
TANK MIXTURES ON CORN
ATRAZINE: Use this product in a pre-plant or pre-emergence tank mixture with Atrazine 90DF, Atrazine
4L or Atra™-5 for control of many annual weeds, including Carpetweed, Crabgrass, Fall panicum, Foxtail,
Lambsquarters, Morningglory, Pigweed, Ragweed and Velvetleaf.
When tank mixing or sequentially applying Simazine and/or Atrazine or products containing either active 
ingredient to Corn, the total pounds of Simazine and/or Atrazine applied must not exceed 2.5 pounds a.i.
per acre per calendar year.
Refer to the Atrazine label for complete directions. Also, refer to the Atrazine label and the "CORN" section 
of this label for precautions and limitations.
ERADICANE
® OR RAZENCANE®: Use in a pre-plant incorporated tank mixture for control of all weeds 
claimed on both this product and Eradicane or Razencane labels including partial control (suppression) of 
Shattercane (Wild cane). Fluid fertilizer may replace all or part of the water in the spray. Check the physical 
compatibility of mixture with fertilizer before use. Refer to the “USE INFORMATION” section of this label for 
a compatibility test procedure. Use a minimum of 20 gallons of spray volume per acre. Refer to the 
Eradicane or Razencane label for incorporation directions. Use the higher rate of this product on Fine
textured soil and where heavy Broadleaf infestations are expected. Use the higher rate of Eradicane or 
Razencane for heavy Bermudagrass and Nutsedge infestations. For partial control (suppression) of
Shattercane, broadcast and incorporate immediately before planting the specified rate of this product as 
listed in the use direction by soil texture for Corn plus the specified label rate of Eradicane or Razencane
per acre. For control of the other weeds claimed on both labels, broadcast and incorporate the specified 
rate of this product as listed in the use direction by soil texture for Corn plus the specified label rate of
Eradicane or Razencane per acre. Observe all precautions and limitations on this product and Eradicane 
or Razencane labels.
GRAMOXONE: Use in a tank mixture where Corn will be planted directly in a cover crop, established sod 
or previous crop residues. This combination controls existing vegetation and provides residual control of 
the annual Broadleaf and Grass weeds listed under “USE INFORMATION”.
Add this product to the spray tank, mix thoroughly with water and then add Gramoxone and a non-ionic 
surfactant. Provide constant agitation during mixing and application to keep the mixture in suspension.
Apply the specified rate of this product as listed in the use direction by soil texture for Corn plus the specified 
label rate of Gramoxone in 20 to 60 gallons of water per acre as a broadcast spray either before or after 
planting, but before Corn emerges. Add a non-ionic surfactant at the rate of 0.5 pint per 100 gallons of 
spray volume.
For further information, see “USE INFORMATION”, caution and warning statements, precautions and notes 
on this product label and the Gramoxone labels.
SUTAN
® +: Use in a pre-plant incorporated tank mixture for control of all weeds claimed on both this product 
and Sutan+ labels including partial control (suppression) of Shattercane (Wild cane). Fluid fertilizer may 
replace all or part of the water in the spray. Check the physical compatibility of mixture with fertilizer before 
use. Refer to the “USE INFORMATION” section of this label for a compatibility test procedure.
Use a minimum of 20 gallons of spray volume per acre.
Refer to the Sutan+ label for incorporation directions. Use the higher rate of this product on Fine textured 
soil and where heavy Broadleaf infestations are expected. For partial control (suppression) of Shattercane, 
broadcast and incorporate immediately before planting, the specified rate of this product as listed in the use 
direction by soil texture for Corn plus the specified label rate of Sutan+ 6.7E per acre. For control of the 
other weeds claimed on both labels, broadcast and incorporate 1.1 to 2.2 pounds of this product plus the

Page 15 of 19 
 
specified label rate of Sutan+ 6.7E per acre. Observe all precautions and limitations on this product and 
Sutan+ labels.
NURSERIES AND CHRISTMAS TREE PLANTINGS
Apply 2.2 to 3.3 pounds of this product in at least 25 gallons of water per acre after transplanting.
Use Precautions and Restrictions: 1) Do not apply more than 3 pounds a.i. (3.3 lb. of this product) per 
acre per calendar year. 2) Do not apply more than once per calendar year. 3) Do not apply for at least one
year after transplanting to avoid plant injury. 4) Except for uses in Christmas tree plantings, all shelterbelt 
and forestry uses are prohibited.
CHRISTMAS TREE PLANTINGS: Remove weed growth before application. Apply 2.2 to 4.4 pounds in at 
least 25 gallons of water per acre after transplanting. Use
the same rate for annual maintenance applications.
For Quackgrass control: Apply 4.4 pounds of this product per acre in the Fall or apply a split application 
of 2.2 pounds per acre in the Fall plus 2.2 pounds per acre in early Spring, after Quackgrass begins growth.
Use Precautions and Restrictions: 1) Do not apply more than 4 pounds a.i. (4.4 lb. of this product) per 
acre per calendar year. 2) Do not apply more than twice per calendar year. 3) Do not use on seedbeds or 
cutting beds. 4) In CA, OR and WA do not apply to Christmas trees sooner than one year after transplanting. 
In other areas, do not apply to Christmas trees less than two years of age. 5) Do not use until soil is firmly 
settled around roots. 6) Do not apply more than once a year, except as directed for Quackgrass control. 7) 
Except for uses on Christmas tree plantings, all shelterbelt and forestry uses are prohibited.
Apply this product to the following species of trees and shrubs, as specified above:
Conifers
Arborvitae
Austrian pine
Balsam fir
Bishop pine*
Blue spruce
Douglas fir
Fraser fir
Hemlock
Juniper
Knobcone pine*
Lodgepole pine (Shore pine)
Monterey pine*
Mugho pine
Norway spruce
Red cedar
Red pine (Norway pine)
Red spruce
Scotch pine
White cedar
White fir
White pine
White spruce
Yew (Taxus spp.)
Deciduous Trees and Woody Ornamentals
American elm
Barberry
Bottle brush*
Boxelder
Bush honeysuckle
Caragana
Carob*
Cotoneaster
Dogwood
Eucalyptus
Holly (Ilex spp.) (max. 3.3 lb./A)
Honey locust
Oleander*
Oregon grape (Mahonia spp.)
Palm (max. 2.2 lb./A)*
Pieris spp. (max. 3.3 lb./A)
Red oak
Russian olive
Siberian elm
* For CA only
SURFLAN® TANK MIX: On Christmas tree plantings, use this tank mix for pre-emergence control of weeds 
listed on this label and the Surflan 75W (or Surflan A.S.) label. Use on field-grown Conifer species listed on 
the labels for each herbicide plus Alpine Fir, Black Spruce, Colorado Blue Spruce, Coulter Pine, Engelmann 
Spruce, Giant Redwood, Grand Fir and Veitchi Fir. Broadcast the mixture as a directed
spray to the soil surface or as an overtop spray using 2.2 to 4.4 pounds of this product and the specified 
label rate of Surflan 75W or Surflan AS. Apply in sufficient water per acre to uniformly treat the area. Follow 
overtop sprays with sprinkler irrigation to move the herbicide from leaf surfaces to the soil. Remove weed 
growth before application. Mix weed residues, prunings or trash into the soil, or remove them before

Page 16 of 19 
 
treatment. Soil should be in good tilth and free of clods at time of application. Shallow cultivation (1 to 2 
inches) after treatment will not reduce weed control. Observe all precautions and limitations on this product 
and Surflan labels.
Note: Length of weed control may be reduced when continuous wet soil conditions follow herbicide 
application.
Use Precautions and Restrictions: 1) Do not use on seedbeds or on unrooted cuttings. 2) Do not use in 
greenhouses or other enclosed areas.
TURFGRASSES FOR SOD (FL ONLY)
Bermudagrass, Centipedegrass, St. Augustinegrass and Zoysiagrass: Apply 2.2 to 4.4 pounds of this 
product per acre according to soil texture, as indicated below:
Muck or Peat 4.4 lb. Old beds Within 2 days after lifting of sod
New beds 3 to 4 days after sprigging or plugging
Sandy soil 2.2 lb. Old beds Within 2 days after lifting of sod
New beds 7 to 10 days after sprigging or plugging
Note: On newly sprigged Turfgrass, temporary slowing of growth may follow application. If weeds regrow, 
apply an additional 2.2 pounds of this product on Muck or Peat, or 1.1 pounds on Sandy soil.
Use Precautions and Restrictions: 1) Do not apply more than 4 pounds a.i. (4.4 pounds of this product) 
per acre per application. Maximum number of applications per calendar year is two. Maximum total amount 
per calendar year is 6 pounds a.i. (6.6 pounds of this product) per acre. 2) Do not apply within 30 days prior 
to cutting or lifting. 3) Do not graze or feed turf clippings to animals, or illegal residues may result. 4) Do not 
apply in combination with surfactants or other spray additives. 5) This product must be watered-in 
immediately after application if applied at a rate greater than 2.2 pounds of this product per acre. 6) For use
only on warm season Turfgrass (e.g., Bermudagrass, Centipedegrass, St. Augustinegrass and 
Zoysiagrass) and reasonably free of infestations of insects, nematodes and diseases.
TURFGRASSES FOR SOD (In States Except FL)
Bermudagrass, Centipedegrass, St. Augustinegrass, Zoysiagrass:
Apply 1.1 to 2.2 pounds of this product per acre.
Use Precautions and Restrictions: 1) Do not apply to established beds within 2 days after lifting of sod. 
Do not apply to new beds before 7 to 10 days after sprigging or plugging. 2) Do not apply more than 2
pounds a.i. (2.2 lb. of this product) per application and no more than two applications per calendar year. 3) 
Do not apply more than 3 pounds a.i. (3.3 lb. of this product) per calendar year. 4) On newly sprigged 
Turfgrass, hybrid Bermudagrass, non-dormant Bermudagrass or non-dormant Zoysiagrass, temporary 
slowing of growth and yellowing may occur following application. 5) Use only on Turfgrass reasonably free
of infestation of insects, nematodes, and diseases. 6) Do not use north of NC (except in the VA coastal 
plains) or on soils with pH of above 7.8. 7) Do not use on muck or alkaline soils. 8) Do not apply over the
rooting area of trees or ornamentals not listed on this label. 9) Do not seed or overseed with desirable 
Turfgrass within 4 months before or 6 months after treatment. 10) Do not apply this product to newly seeded 
grasses until they have overwintered and have well developed rhizome treatment. 11) Do not exceed 2 
pounds a.i. (2.2 lb. of this product) within 12 months of seeding grasses. 12) For use only on warm season 
Turfgrass (e.g., Bermudagrass, Centipedegrass, St. Augustinegrass and Zoysiagrass).
Note: Do not graze or feed turf clippings to animals, or illegal residue may result.
TURFGRASS FOR FAIRWAYS AND LAWNS*
(*Residential Turf on Lawns, Institutional Turf, Parks or Recreational fields)

Page 17 of 19 
 
Bermudagrass, Centipedegrass, St. Augustinegrass and Zoysiagrass: Apply this product after 
September 1 (after October 1 for Annual bluegrass) before emergence of Winter annual weeds. Fall
applications of this product will control Annual bluegrass, Burclover, Chickweed (Common, Mouseear), 
Corn speedwell, Henbit, Hop clover, Lawn burweed, Parsley-piert and Spurweed. This product will also 
control these weeds soon after emergence. For control of Summer annual weeds listed in the “USE 
INFORMATION” section of this label, also apply this product in late Winter before the weeds emerge.
Apply in a minimum of 15 gallons of water per acre or 1 gallon per 1,000 square feet.
Irrigate with 0.5 inch of water if rainfall does not occur within 10 days after pre-emergence treatment.
Where Annual bluegrass is the major weed, use 1.1 pounds of this product per acre (0.4 oz./1,000 sq. ft.)
(1 lb. a.i./A). Use 1.1 to 1.7 pounds per acre (0.4 to 0.6 oz./1,000 sq. ft.) (1.1 to 1.6 lb. a.i./A) to control other 
weeds. Irrigation of 0.5 inch is required. In the absence of irrigation, use 0.7 pound of this product per acre 
(0.3 oz./1,000 sq. ft.) (0.65 lb. a.i./A) against Annual bluegrass and other weeds.
Do not exceed 1.1 pounds per acre per treatment on newly sprigged Turfgrass or on hybrid Bermudagrass
such as Tiflawn, Tifway and Ormond.
For continued Summer annual weed control, apply another 1.1 pounds per acre at least 30 days after the 
previous application, but not after June 1. However, do not make more than two applications of this product
per calendar year.
Use Precautions and Restrictions: On newly sprigged Turfgrass, hybrid Bermudagrass, non-dormant 
Bermudagrass or non-dormant Zoysiagrass, temporary slowing of growth and yellowing may occur
following application. (To avoid turf injury): 1) For use only on warm season Turfgrass (e.g., Bermudagrass, 
Centipedegrass, St. Augustinegrass and Zoysiagrass) and reasonably free of infestations of insects, 
nematodes and diseases. 2) Do not use on golf greens. 3) Do not use North of NC (except may be used in 
VA Coastal Plains) or on soils with a pH above 7.8. 4) Do not use on Muck or alkaline soils. 5) Do not apply 
over the rooting area of trees or ornamentals not listed on this label. 6) Do not seed or overseed with 
desirable Turfgrass within 4 months before or 6 months after treatment. 7) Do not apply this product to 
newly seeded Grasses until they have over-wintered and have a well-developed rhizome system. 8) Do not 
apply more than 1.6 pound a.i. (1.7 lb. of this product) per acre (0.6 oz./1,000 sq. ft.) per application with 
the requirement of 0.5 inch of irrigation OR 0.65 pound a.i (0.7 lb. of this product) per acre (0.3 oz./1,000 
sq. ft.) without irrigation. 9) Maximum number of application per calendar year is two.
Note: Do not graze or feed Turf clippings to animals or illegal residues may result.
TANK MIXTURE WITH IMITATOR PLUS OR ROUNDUP OR TOUCHDOWN: This tank mixture will 
provide control of emerged Annual weeds and residual control of weeds listed on this label. The 
combination also will partially control emerged Perennial weeds listed on the Roundup, Imitator Plus or 
Touchdown label. Add to the spray tank the specified rate of this product noted in the above section for this
product alone.
Then add the specified label rate of Roundup, Imitator Plus or Touchdown per acre depending on weeds 
present and their growth stage. Also, add an agriculturally approved non-ionic surfactant at 0.5% by volume 
of spray solution. Apply the mixture in 10 to 40 gallons of water per acre as a post-emergence spray at the 
appropriate weed growth stage given on the Roundup, Imitator Plus or Touchdown label. Provide constant 
agitation during mixing and application to keep the mixture in suspension. Refer to the “APPLICATION 
PROCEDURES” section of this label for further directions. Refer to the labels of both herbicides for specific 
non-crop sites, rates, weeds controlled and further directions, precautions and limitations.

Page 18 of 19 
 
STORAGE AND DISPOSAL
Do not contaminate water, food or feed by storage or disposal.
PESTICIDE STORAGE: Storage should be under lock and key and secure from access by unauthorized 
persons and children. Storage should be in a cool, dry area away from any heat or ignition source. Do 
not stack over 2 pallets high. Move bags carefully so as not to tear or puncture. Do not move containers 
from one area to another unless they are securely sealed. Keep containers tightly sealed when not in 
use. Do not allow bags to become wet or store near water supplies, food, feed and fertilizer to avoid 
contamination.
Store in original container only. If the contents are leaking or material is spilled, follow these steps:
1. Collect and place in suitable containers for disposal.
2. Wash area with soap and water to remove remaining pesticide.
3. Follow washing with clean water rinse.
4. Do not allow runoff to enter sewer or contaminate water supplies.
5. Dispose of waste as indicated below.
PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be disposed of on site or at 
approved waste disposal facility.
CONTAINER DISPOSAL:
Nonrefillable Container (fl exible-bag-all weights): Nonrefillable container. Do not reuse or refill this 
container. Completely empty bag into application equipment by shaking and tapping sides and bottom 
to loosen clinging particles. Offer for recycling, if available. Dispose of empty container in a sanitary 
landfill or by incineration, or, if allowed by State and local authorities, by burning. If burned, stay out of 
smoke.
Nonrefillable Container (rigid-fifty lb. or less): Nonrefillable container. Do not reuse or refill this 
container. Offer for recycling, if available. Clean container promptly after emptying. Triple rinse as follows: 
Empty the remaining contents into application equipment or a mix tank. Fill the container one-fourth full 
with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or 
store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this 
procedure two more times. Dispose of empty container in a sanitary landfill or by incineration, or, if 
allowed by State and local authorities, by burning. If burned, stay out of smoke.
Nonrefillable Container (rigid-greater than fifty lb.): Nonrefillable container. Do not reuse or refill this 
container. Offer for recycling, if available. Clean container promptly after emptying. Triple rinse as follows: 
Empty the remaining contents into application equipment or a mix tank. Fill the container one-fourth full 
with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at 
least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth
several times. Turn the container over onto its other end and tip it back and forth several times. Empty 
the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeat this 
procedure two more times. Dispose of empty container in a sanitary landfill or by incineration, or, if 
allowed by State and local authorities, by burning. If burned, stay out of smoke.
Refillable Container: Refillable container. Refill this container with pesticide only. Do not reuse this 
container for any other purpose. Cleaning the container before final disposal is the responsibility of the 
person disposing of the container. Cleaning before refilling is the responsibility of the refiller. To clean 
the container before final disposal, empty the remaining contents from this container into application
equipment or mix tank. Fill the container about 10 percent full with water. Agitate vigorously or recirculate 
water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection 
system. Repeat this rinsing procedure two more times.

Page 19 of 19
WARRANTY—CONDITIONS OF SALE
THE DIRECTIONS FOR USE of this product are based upon tests believed reliable. Follow directions 
carefully. Timing and method of application, weather and crop conditions, mixtures with other chemicals
not specifically recommended and other influencing factors in the use of this product are beyond the control 
of the Seller. To the extent consistent with applicable law, Buyer assumes all risks of use, storage and 
handling of this material not in strict accordance with directions given herewith. To the extent consistent 
with applicable law, in no case shall the Manufacturer or the Seller be liable for consequential, special or 
indirect damages resulting from the use or handling of this product when such use and/or handling is not in 
strict accordance with directions given herewith. The foregoing is a condition of sale by the Seller and is 
accepted as such by the Buyer.
 Manufactured By [For]:
[Made in _______]
The DREXEL logo is a registered trademark of Drexel Chemical Company. All other brand names, product names, or trademarks 
belong to their respective holders.