crop-chem-docs/corpus/epa_ppls/264-678.md

# PREVICUR

- EPA Reg No: **264-678**
- Registrant: BAYER CROPSCIENCE, LLC
- Signal word: Caution
- Active ingredients: Propamocarb hydrochloride (66.5%)
- Label accepted: 2024-08-16
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000264-00678-20240816.pdf

---
August 16, 2024 
 
Anne Pfleiger 
Registration Manager 
Bayer CropScience LP 
800 N. Lindbergh Blvd 
St. Louis, MO 63137 
 
Subject: Label Amendment - Registrati on Review Mitigation for Propamocarb 
hydrochloride 
 Product Name: PREVICUR 
 EPA Registration Number: 264-678 
 Application Date: March 29, 2019 , July 9, 2018, and February 23, 2024 
Decision Number: 560070 
 
Dear Anne Pfleiger: 
 
The Agency, in accordance with the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), 
as amended, has completed reviewing all the information submitted with your application to 
support the Registration Review of the above referenced product in connection with the 
Propamocarb hydrochloride Interim Decision, and has concluded that your submission is 
acceptable. The label referred to above, submitted in connection with registration under FIFRA, 
as amended, is acceptable. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please 
be aware that the website becomes labeling under the Federal Insecticide, Fungicide, and 
Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the 
product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 
40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In 
addition, regardless of whether a website is referenced on your product’s label, claims made on 
the website may not substantially differ from those claims approved through the registration 
process. Therefore, should the Agency find or if it is brought to our attention that a website 
contains false or misleading statements or claims substantially differing from the EPA approved 
registration, the website will be referred to the EPA’s Office of Enforcement and Compliance 
Assurance.

Page 2 of 2 
EPA Reg. No. 264-678 
Decision No. 560070 
 
A stamped copy of your labeling is enclosed for your records. This labeling supersedes 
all previously accepted labeling and must be used at your next label printing. You must 
submit one copy of the final printed labeling before you release the product for 
shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may 
distribute or sell this product under the previously approved labeling for 12 months 
from the date of this letter. After 12 months, you may only distribute or sell this 
product if it bears this new revised labeling or subsequently approved labeling. “To 
distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation 
at 40 CFR 152.3. 
 
If you have any questions about this letter, please contact DeMariah Koger by phone at (202)-
566-2288, or via email at Koger.demariah@epa.gov. 
 
 S i n c e r e l y , 
 
 
Julie Javier, Team Leader 
Risk Management and Implementation Branch 4 
Pesticide Re-Evaluation Division 
Office of Pesticide Programs 
 
 
 
 
ENCLOSURE: Stamped label

1
PREVICUR® FLEX Fungicide
For Control of Diseases of Cucurbits Vegetables, Guava, Leafy Greens 
Subgroup 4-16A, Lima Beans, Pepper and Eggplant Subgroups 8-10B and 8-10C,
Starfruit, Tomato subgroup 8-10A, Tuberous and Corm Vegetables Subgroup 1C.
ACTIVE INGREDIENT: Propamocarb hydrochloride, (Propyl [3-(dimethylamino)propyl] 
carbamate monohydrochloride)*.............................................................................................. 66.5 %
OTHER INGREDIENTS:......................................................................................................... 33.5%
TOTAL: 100.0%
Contains 6.0 lbs. propamocarb hydrochloride active ingredient per gallon.
EPA Reg No. 264-678 EPA Est. No. 
KEEP OUT OF REACH OF CHILDREN
CAUTION
For MEDICAL And TRANSPORTATION Emergencies ONLY Call 24 Hours A Day 1-800-334-7577
For PRODUCT USE Information, Call 1-866-99BAYER (1-866-992-2937)
See [Back][Side] Panel for First Aid Instructions and [Leaflet][Booklet] for Complete Precautionary Statements and 
Directions for Use. (Note to reviewer: Location of additional precautionary statements, directions for use will vary 
between those listed, depending on container type/size.)
FIRST AID
IF
SWALLOWED:
x Call a physician or Poison Control Center or doctor immediately for treatment 
advice.
x Have person sip a glass of water if able to swallow.
x DO NOT induce vomiting unless told to do so by a poison control center or 
doctor.
x DO NOT give anything by mouth to an unconscious person.
IF IN EYES: x Hold eye open and rinse slowly and gently with water for 15-20 minutes.
x Remove contact lenses, if present, after the first 5 minutes, then continue 
rinsing eye.
x Call a poison control center or doctor for treatment advice.
IF ON SKIN OR 
CLOTHING:
x Take off contaminated clothing.
x Rinse skin immediately with plenty of water for 15-20 minutes.
x Call a poison control center or doctor for treatment advice.
Have the product container or label with you when calling a poison control center or doctor or 
going for treatment.
For MEDICAL Emergencies Call 24 Hours A Day 1-800-334-7577.
PROPAMOCARB 
HYDROCLORIDE GROUP 28 FUNGICIDE
Aug 16, 2024
264-678

2
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION
Harmful if swallowed or absorbed through skin. Causes moderate eye irritation. Avoid contact with 
skin, eyes, or clothing. Prolonged or frequently repeated skin contact may cause allergic reactions in 
some individuals. Wash hands before eating, drinking,chewing gum or using tobacco, or using the 
toilet.
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Applicators and other handlers must wear:
x Long sleeved shirt and long pants
x Waterproof gloves
x Shoes plus socks
User Safety Requirements
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables
exist, use detergent and hot water. Keep and wash PPE separately from other laundry.
ENGINEERING CONTROLS
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the 
requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 
170.240(d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS.
Pilots must use an enclosed cab that meets the definition listed in the Worker Protection Standard for 
agricultural pesticides [40 CFR 170.305]. 
User Safety Recommendations
Users should:
x Remove clothing/PPE immediately if pesticides get inside. Then wash and put on clean clothing.
x Remove PPE immediately after handling product. Wash outside of gloves before removing. As 
soon as possible, wash thoroughly and change into clean clothing.
ENVIRONMENTAL HAZARDS
DO NOT apply directly to water, to areas where surface water is present, or to intertidal areas below 
the high water mark. DO NOT contaminate water when disposing of equipment washwaters or 
rinsate. DO NOT apply when weather conditions favor drift from the treated areas.

3
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
DO NOT apply this product in a way that will contact workers or other persons, either directly or 
through drift. Only protected handlers may be in the area during application. For any requirements 
specific to your State or Tribe, consult the agency responsible for pesticide regulation.
Restriction: Pilots must use an enclosed cab that meets the definition listed in the Worker Protection 
Standard for agricultural pesticides [40 CFR 170.305].
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard 40 CFR 
Part 170. This Standard contains requirements for the protection of agricultural workers on farms, 
forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements 
for training, decontamination, notification, and emergency assistance. It also contains specific 
instructions and exceptions pertaining to the stat ements on this label about personal protective 
equipment (PPE) and restricted-entry interval. The requi rements of this box only apply to uses of this 
product that are covered by the Worker Protection Standard.
DO NOT enter or allow worker reentry into treated area s during the restricted entry interval (REI) of 
12 hours.
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard 
and that involves contact with anything that has been treated, such as plants, soil, or water, is:
x Coveralls
x Waterproof gloves 
x Shoes plus socks
PRODUCT INFORMATION
For field applications, PREVICUR® FLEX FUNGICIDE can be used as a solo product or in tank-mixes 
for certain diseases of Cucurbits, Guava, Leafy Greens Subgroup 4-16A, Lima Beans, Pepper and 
Eggplant Subgroups 8-10B and 8-10C, Starfruit, Tomato subgroup 8-10A, and Tuberous and Corm 
Vegetables Subgroup 1C. PREVICUR FLEX FUNGICIDE in a tank-mixture combines the systemic 
action of propamocarb hydrochloride with the contact activity of the tank-mix partner to give protection 
against late blight (Phytophthora infestans), early blight (Alternaria solani), downy mildews, and 
Phytophthora fruit rots. In Tuberous and Corm Vegetables Subgroup 1C, a PREVICUR FLEX 
FUNGICIDE tank-mixture will reduce the incidence of tuber blight caused by Phytophthora infestans
when used as part of a disease management program. PREVICUR FLEX FUNGICIDE can be 
applied either as a broadcast or as an over the row banded application. Alternations with QoI (Group 
11) containing fungicides are advised as a resistance management strategy. A PREVICUR FLEX 
FUNGICIDE tank-mixture is an excellent disease control product combination when used according 
to label directions for control of these diseases.
For greenhouse applications on cucurbits, leaf lettuce, peppers, and tomato, use PREVICUR FLEX 
FUNGICIDE in rotation with other effective fungicides if available to control diseases caused by 
Pythium and Phytophthora spp. during plant propagation and greenhouse production.

4
FUNGICIDE RESISTANCE MANAGEMENT 
For resistance management, PREVICUR FLEX FUNGICIDE contains a Group 28 fungicide. Any 
fungal population may contain individuals naturally resistant to PREVICUR FLEX FUNGICIDE and 
other Group 28 fungicides. A gradual or total loss of pest control may occur over time if these 
fungicides are used repeatedly in the same fields. Appropriate resistance-management strategies 
should be followed.
To delay fungicide resistance, take one or more of the following steps: 
x Rotate the use of PREVICUR FLEX FUNGICIDE or other Group 28 fungicides within a 
growing season sequence with different groups that control the same pathogens. 
x Use tank mixtures with fungicide from a different group that are equally effective on the target 
pest when such use is permitted. Use at least the minimum application rate as labeled by the 
manufacturer. 
x Adopt an integrated disease management program for fungicide use that includes scouting, 
uses historical information related to pesticide use, and crop rotation, and which considers host 
plant resistance, impact of environmental conditions on disease development, disease 
thresholds, as well as cultural, biological and other chemical control practices. 
x Where possible, make use of predictive disease models to effectively time fungicide 
applications. Note that using predictive models alone is not sufficient to manage resistance. 
x Monitor treated fungal populations for resistance development. 
x Contact your local extension specialist or certified crop advisor for any additional pesticide 
resistance-management and/or IPM recommendations for specific crops and pathogens. 
x For further information or to report suspected resistance contact Bayer CropScience at 1-866-
99BAYER (1-866-992-2937). You can also contact your pesticide distributor or university 
extension specialist to report resistance.
APPLICATION INFORMATION
Begin applications when conditions are favorable for disease, but before infection, according to the 
use directions below.
MIXING THE SPRAY
It is the pesticide user's respons ibility to ensure that all products are registered for the intended use. 
Read and follow the applicable restrictions and limi tations and directions for use on all product labels 
involved in tank mixing. Users must follow the most restrictive directions for use and precautionary 
statements of each product in the tank mixture. 
Follow the directions of your State Cooperative Extension Service for tank mixing with wettable 
powders, emulsifiable concentrates, suspension concentrates, or flowables. Add one-half of the 
required amount of water to the spray or mixing t ank and start agitation. Add the required quantity of 
PREVICUR FLEX FUNGICIDE and the tank-mix partner to the water and complete filling with water 
to the required total volume. Maintain agitation throughout spraying. DO NOT allow spray mixture to 
remain in the tank overnight, or for long periods during the day without agitation.
Consult the intended tank-mix partner product label for appropriate application rates and use 
instructions. Follow the label direct ions for the most restrictive of label precautions and limitations.
This product may not be mixed with any product c ontaining a label prohibition against such mixing.
Read and observe the most restrictive precautiona ry statements and other information appearing on 
product labels used in mixtures.

5
Banded Applications:
Seed potatoes can be a significant primary source of late blight, and an early fungicide application 
can minimize this threat. In othe r crops, infected transplants or unusual weather conditions may 
increase the threat of disease when the plants are small. PREVICUR FLEX FUNGICIDE may be 
applied as an early season post-emergence banded application. When applying PREVICUR FLEX 
FUNGICIDE in a band, DO NOT concentrate the dose rate in the banded area. Thorough coverage of 
the plants is essential for optimum disease control; therefore adjust the bandwidth depending on plant 
height or size. Repeated applications will result in improved disease control.
When using a banded application, the actual amount of PREVICUR FLEX FUNGICIDE applied will be 
proportionately less than what would be applied with a broadcast spray. Use the following formula to 
calculate the amount of PREVICUR FLEX FUNGICIDE needed per crop acre when making band 
applications. Apply band applications of PREVICUR FLEX FUNGICIDE in a minimum of 5 gallons of 
water per acre.
Band width in 
inches
X Broadcast rate 
(pts./acre)
= Amount needed per acre of field 
in pts./A.
Row spacing in 
inches
Broadcast Applications:
Using ground spray equipment, apply PREVICUR FLEX FUNGICIDE at the rates specified below. 
Thorough uniform coverage is essential for dise ase control. Apply a PREVICUR FLEX FUNGICIDE 
tank-mixture in a minimum of 15 gallons of water per acre. Apply as a foliar spray in sufficient water to 
obtain thorough coverage. With moderate to heavy di sease pressure, use the shorter spray intervals.
Check with your local Cooperative Extension Service if you are unsure about whether these 
conditions exist.
Aerial Applications:
Apply PREVICUR FLEX FUNGICIDE at the rates specif ied below using fixed wing or rotary aircraft 
equipment in a minimum of 5 gallons of water per a cre unless otherwise directed under specific crop 
labeling. Thorough uniform coverage is essential for disease control.
SPRAY DRIFT ADVISORIES 
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT. 
BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS. 
IMPORTANCE OF DROPLET SIZE 
An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide 
target pest control. While applying larger droplets will reduce spray drift, the potential for drift will be 
greater if applications are made improperly or under unfavorable environmental conditions. 
Controlling Droplet Size – Ground Boom
x Volume - Increasing the spray volume so that larger droplets are produced will reduce spray 
drift. Use the highest practical spray volume for the application. If a greater spray volume is 
needed, consider using a nozzle with a higher flow rate.
x Pressure - Use the lowest spray pressure recommended for the nozzle to produce the target 
spray volume and droplet size. 
x Spray Nozzle - Use a spray nozzle that is designed for the intended application. Consider 
using nozzles designed to reduce drift.

6
Controlling Droplet Size – Aircraft 
x Adjust Nozzles - Follow nozzle manufacturers’ recommendations for setting up nozzles. 
Generally, to reduce fine droplets, nozzles should be oriented parallel with the airflow in flight. 
BOOM HEIGHT – Ground Boom 
For ground equipment, the boom should remain level with the crop and have minimal bounce. 
RELEASE HEIGHT - Aircraft 
Higher release heights increase the potential for spray drift. 
BOOMLESS GROUND APPLICATIONS
Setting nozzles at the lowest effective height will help to reduce the potential for spray drift.
SHIELDED SPRAYERS 
Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. 
Verify that the shields are not interfering with the uniform deposition of the spray on the target area. 
HANDHELD TECHNOLOGY APPLICATIONS
Take precautions to minimize spray drift.
TEMPERATURE AND HUMIDITY 
When making applications in hot and dry conditions, use larger droplets to reduce effects of 
evaporation. 
TEMPERATURE INVERSIONS 
Drift potential is high during a temperature inversion. Temperature inversions are characterized by 
increasing temperature with altitude and are common on nights with limited cloud cover and light to 
no wind. The presence of an inversion can be indicated by ground fog or by the movement of smoke 
from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a 
concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves 
upward and rapidly dissipates indicates good vertical air mixing. Avoid applications during 
temperature inversions. 
WIND 
Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND 
CONDITIONS. 
Applicators need to be familiar with local wind patterns and terrain that could affect spray drift.
APPLICATION THROUGH IRRIGATION SYSTEMS
Apply this product only through center pivot, mo torized-lateral move, traveling gun, solid set or 
portable (wheel move, side roll, end tow, or hand move) and drip irrigation systems. PREVICUR 
FLEX FUNGICIDE may also be applied by drip irrigati on or rock wool/nutrient solution systems in the 
greenhouse. DO NOT apply this product through any other type of irrigation system. Crop injury, lack 
of effectiveness, or illegal pesticide residues in the crop can result from non-uniform distribution of 
treated water. If you have questions about calibrat ion, contact State Extension Service specialists, 
equipment manufacturers or other experts. A perso n knowledgeable of the chemigation system and 
responsible for its operation or under the supervision of the responsible person, must shut the system 
down and make necessary adjustments if the need arise. With the exception of Tuberous and Corm

7
Vegetables Subgroup 1C, PREVICUR FLEX FUNGICIDE has not been sufficiently tested when 
applied through irrigation systems to ensure consisten t product performance for all labeled uses. The 
following application techniques are provided for user reference but DO NOT constitute a warranty of 
fitness for application through sprinkler or drip ir rigation equipment. Users must check with state and 
local regulatory agencies for potential use restrict ions before applying any agricultural chemical 
through sprinkler or drip irrigation equipment. 
DO NOT connect an irrigation system (including greenhouse systems) used for pesticide application 
to a public water system, unless the pesticide label prescribed sa fety devices for public water 
systems are in place. ‘Public water system' means a system for th e provision to the public of piped 
water for human consumption if such system has at least 15 service connections or regularly serves 
an average of at least 25 individuals daily at le ast 60 days out of the year. Chemigation systems 
connected to public water systems must contain a functional, reduced-pressure zone, back flow 
preventer (RPZ) or the functional equivalent in the water supply line upstream from the point of 
pesticide introduction. As an option to the RPZ, th e water from the public water system must be
discharged into a reservoir tank prior to pestic ide introduction. There must be a complete physical 
break (air gap) between the flow outlet end of the fill pipe and the top or overflow rim of the reservoir 
tank of at least twice the inside diameter of the fill pipe. The pesticide injection pipeline must contain a 
functional, automatic, quick-closing check valve to prevent the flow of fluid back toward the injection 
pump. Pesticide injection pipeline must contain a functional, normally closed, solenoid-operated valve 
located on the intake side of the injection pump and connected to the system interlock to prevent fluid 
from being withdrawn from the su pply tank when the irrigation system is either automatically or 
manually shut down. The systems must contain functi onal interlocking controls, to automatically shut 
off the pesticide injection pump when the water pump motor stops or in cases where there is no water 
pump, when the water pressure decreases to the point where pesticide distribution is adversely 
affected. Systems must use a metering pump, for example a positive displacement injection pump 
(e.g., diaphragm pump) effectively designed and cons tructed of materials that are compatible with 
pesticides and capable of being fitted with a system interlock. 
DO NOT apply when wind speed favors drift beyond the area intended for treatment. Spray mixture in 
the chemical supply tank must be agitated at all times, otherwise settling and uneven application may 
occur. Apply pesticide continuously for the duration of the water application. For mixing instructions, 
please refer to specific use directions in the “Application Directions” section.
This product may be used through two basic types of irrigation systems as outlined in Sections A 
and B below. The system must contain a functional check valve, vacuum relief valve, and low-
pressure drain appropriately located on the irrigation pipeline to prevent water source contamination 
from back flow. Determine which type of irrigation system is in place, then refer to the appropriate 
directions provided below for each type. See crops section on the label for listed treatment rates and 
additional use information.
A. Center Pivot, Motorized-Lateral Move and Traveling Gun Irrigation Equipment
For injections of pesticides, these continuously moving systems must use a positive displacement 
injection pump of either diaphragm or piston type an d be constructed of materials that are compatible 
with pesticides. They must also be capable of being fitted with a system interlock and capable of 
injection at pressures approximately 2-3 times thos e encountered within the irrigation water line.
Venturi applicator units cannot be used on these systems. Thoroughly mix the specified amount of 
this product for acreage to be co vered into same amount of water used during calibration and inject 
into system continuously for one revolution or run. Mixture in the chemical supply tank must be 
continuously agitated during the injection run. Shut off injection equipment after one revolution or run, 
but continue to operate irrigation system until this product has been cleared from last sprinkler head.

8
B. Solid-Set, Portable (Wheel Move, Side Roll, End Tow, or Hand Move) and Drip Irrigation 
Equipment
With stationary systems, an effectively designed in-li ne Venturi applicator unit is preferred to support 
even and quick distribution. However, a positive-dis placement pump can also be used. For solid set 
systems, determine acreage covered by sprinkler. Fill the tank of injection equipment with water and 
adjust flow to use contents over 30 to 45 minutes. Mix specified amount of this product for acreage to 
be covered with water so that the total mixture of th is product plus water in the injection tank is equal 
to the quantity of water used during calibration. Operate entire system at normal pressures specified 
by the manufacturer of injection equipment used, for am ount of time established during calibration. 
This product can be injected during the irrigation cycl e or as a separate application. For drip irrigation 
systems, introduce PREVICUR FLEX FUNGICIDE into irrigation solution for a period sufficient to 
distribute the product uniformly in the crop, and PREVICUR FLEX FUNGICIDE must be added near 
the end of the normal irrigation cycle so that subseque nt watering will not flush the product from the 
root zone. Stop injection equipment with any system after treatment is completed and continue to 
operate irrigation system until this product has been cl eared from last sprinkler head or drip irrigation 
line. Greenhouses must be constructed of materials that are compatible with pesticides.
COMPATIBILITY
PREVICUR FLEX FUNGICIDE is compatible with most commonly used fungicide, herbicide, 
insecticide, and foliar nutrient products. Howev er, the physical compatibility of PREVICUR FLEX 
FUNGICIDE with all potential tank-mix partners has not been fully investigated. If tank mixing with 
other pesticides is desirable, conduct a jar te st with the volumes and rates typically used in 
agricultural application. Using a small containe r of water, add the proportionate amounts of the 
products: wettable powders and water-dispersible gran ular products first, then liquid flowables and 
emulsifiable concentrates last. After thoroughly mixing , let stand for at least 15 minutes. Look for 
signs of separation, globules, sludge, flakes, or other precipitates. Physical compatibility is indicated if 
the combination remains mixed or can be remixed readily. THE CROP SAFETY OF ALL POTENTIAL 
TANK-MIXES WITH PREVICUR FLEX FUNGICIDE, INCLUDING ADDITIVES AND OTHER 
PESTICIDES HAS NOT BEEN TESTED ON ALL CROPS. BEFORE APPLYING ANY TANK-
MIXTURE NOT SPECIFICALLY LISTED ON THIS LA BEL, SAFETY TO THE TARGET CROP(S) 
MUST BE CONFIRMED.
CROP ROTATION RESTRICTIONS
Crops on this label may be rotated anytime, following the last application of PREVICUR FLEX
FUNGICIDE. DO NOT rotate to root and leafy vegetables for 30 days following the last application of 
PREVICUR FLEX FUNGICIDE. DO NOT rotate to winter wheat and all other crops NOT on this label
for 120 days following the last application of PREVICUR FLEX FUNGICIDE.

9
CROP USE DIRECTION
CUCURBIT VEGETABLES, GROUP 9
Chayote (fruit); Chinese waxgourd (Chinese preservi ng melon); citron melon; cucumber; gherkin; 
gourd, edible (includes hyotan, cucuzza, hechima, Chinese okra); Momordica spp (includes balsam 
apple, balsam pear, bittermelon, Chinese cucumber); muskmelon (includes true canteloupe, 
cantaloupe, casaba, crenshaw melon, golden pershaw melon, honeydew melon, honey balls, mango 
melon, Persian melon, pineapple melon, Santa Claus melon, and snake melon); pumpkin; squash, 
summer (includes crookneck squash, scallop squash, straightneck squash, vegetable marrow, 
zucchini); squash, winter (includes butternut sq uash, calabaza, hubbard squash, acorn squash, 
spaghetti squash); watermelon. 
Apply preventatively as a foliar spray in sufficien t water to obtain thorough coverage. PREVICUR 
FLEX FUNGICIDE may be applied through chemigation (including drip and transplant/setting water), 
see APPLICATION THROUGH IRRIGATION SYSTEMS above. PREVICUR FLEX FUNGICIDE may 
be used in a tank-mix with other fungicides regi stered for the control of downy mildew. See 
Compatibility section.
Disease
PREVICUR FLEX 
FUNGICIDE
(Pints per Acre)
Applications Instructions 
Downy mildew 
(Pseudoperonospo
ra cubensis)
Phytophthora 
blight: 
Suppression only 
(Phytophthora 
capsici
)
1.2
(0.9 lbs
Propamocarb/A)
or
0.6 – 1.2
(0.45-0.9 lbs
Propamocarb/A)
+
Tank-mix partner
Use PREVICUR FLEX FUNGICIDE as a foliar spray in a 
preventive program. Begin applications when conditions 
are favorable for disease, but before infection. Continue 
on 7-14 day intervals until the threat of disease is over. 
For Phytophthora capsici suppression, ground application 
must be made with a tractor-mounted boom sprayer 
equipped with three nozzles per row with two nozzles 
directed to ensure thorough coverage of the lower portion 
of the plants.
When applying PREVICUR FLEX FUNGICIDE at intervals 
longer than 7 days, alternate with an application of a 
contact fungicide midway between PREVICUR FLEX 
FUNGICIDE applications. With moderate to heavy 
disease pressure the shorter spray intervals must be 
used. Check with your local Cooperative Extension 
Service if you are unsure about whether these conditions 
exist.
 
Pythium root rots 
and seedling 
diseases (Pythium 
spp.)
1.2
(0.9 lbs
Propamocarb/A)
PREVICUR FLEX FUNGICIDE can be applied by directed 
nozzles to the lower portion of the plants and surrounding 
soil, or via drip irrigation, transplant/setting water, or by 
sprinklers.
Restrictions 
x Maximum single use rate: 1.2 Pints/acre (0.9 lbs Propamocarb/A).
x Minimum reapplication interval: 7 days.
x Regardless of rate, do not exceed 2 applications per crop cycle.

10
x Do not use on more than 4 crop cycles per acre per year.
x DO NOT apply more than 6 pints of PREVICUR FLEX FUNGICIDE (4.5 lbs. total a.i.) per acre 
per year.
x DO NOT apply within 2 days of harvest for cucurbits.
x When used at 1.2 pints/acre (0.9 lbs Propamocarb/A), DO NOT exceed 5 applications of 
Previcur Flex Fungicide per year. When used at 0.6 pints per acre (0.45 lb Propamocarb/A), DO
NOT exceed 8 applications per year.
GUAVA[1]
Disease PREVICUR FLEX 
FUNGICIDE
(Pints per Acre)
Applications Instructions
Pythium root rot 
(Pythium spp.)
2.0
(1.5 lbs
Propamocarb/A)
Apply PREVICUR FLEX FUNGICIDE as soil directed 
spray application under the tree canopy in a minimum of 
80 gallons per acre. Begin applications when conditions 
are favorable for disease, but before infection. Follow with 
a second application after a minimum interval of 30 days. 
Application requires irrigation immediately after the 
application (within 6 hours) with one half (1/2) to one third 
(1/3) inch of water to properly move the PREVICUR FLEX 
FUNGICIDE into the root zone. 
Irrigation can be done as overhead sprinkler irrigation or 
garden hose drench to the drip line. 
Note that the treated area for directed applications is 
calculated as row spacing X number of rows X plot length.
Restrictions 
x Maximum single use rate: 2 Pints/acre (1.5 lbs Propamocarb/A).
x Minimum reapplication interval: 30 days
x Maximum number of applications per year: 2
x DO NOT apply more than 4 pints of PREVICUR FLEX FUNGICIDE (3.0 lbs. total a.i.) per acre 
per year
x DO NOT apply within 1 day of harvest.
x [1Not for use in CA without a supplemental label.]

11
LEAFY GREENS SUBGROUP 4-16A
Amaranth, Chinese; amaranth, leafy; aster, Indian; blackjack; cat’s whiskers; cham -chwi; cham-na-
mul; chervil, fresh leaves; chipilin; chrysanthemu m, garland; cilantro, fresh leaves; corn salad; 
cosmos; dandelion, leaves; dang-gwi, leaves; dill weed; dock; dol-nam-mul; ebolo; endive; escarole; 
fameflower; feather cockscomb; good king henry; huauz ontle; jute, leaves; lettuce, bitter; lettuce, 
head; lettuce, leaf; orach; parsley, fresh leaves; plantain, buckhorn; primrose, English; purslane, 
garden; purslane, winter; radicchio; spinach; spinach, Malabar; spinach, New Zealand; spinach, 
tanier; Swiss chard; violet, Chinese, leaves; cultivars, varieties, and hybrids of these commodities.
Apply preventatively as a foliar spray in sufficient water to obtain thorough coverage. Ground 
application may be made with a tractor-mounted boo m sprayer equipped with three nozzles per row 
with two nozzles directed to ensure thorough coverage of the lower portion of the plants and the 
surrounding soil surface. PREVICUR FLEX FUNGICIDE may be applied through chemigation
(including drip and transplant/setting water), see APPLICATION THROUGH IRRIGATION SYSTEMS 
above. PREVICUR FLEX FUNGICIDE may also be used in a tank-mix with other fungicides 
registered for the control of downy mildew. See Compatibility section.
Disease
PREVICUR FLEX
FUNGICIDE
(Pints per Acre)
Applications Instructions
Downy mildew
(Bremia lactucae)
2.0
(1.5 lbs
Propamocarb/A)
or
1.33 – 2.0
(0.9975-1.5 lbs
Propamocarb/A)
+
Tank-mix partner
Make foliar applications when conditions first become 
favorable for disease development (for example, high 
moisture and moderate temperature), but before infection. 
Continue applications on a 7-10 day interval until threat of 
disease is over.
Use PREVICUR FLEX FUNGICIDE on a 5-day schedule if 
signs of infection are present and conditions are favorable 
for disease development. Check with your local 
Cooperative Extension Service if you are unsure about 
whether these conditions exist.
For aerial applications use a minimum of 10 gallons of 
spray.
Pythium root rots 
and seedling 
diseases (Pythium 
spp.)
2.0
(1.5 lbs
Propamocarb/A)
PREVICUR FLEX FUNGICIDE can be applied by directed 
nozzles to the lower portion of the plants and surrounding 
soil, or via drip irrigation, in transplant/setting water, or by 
sprinklers.
Restrictions 
x Maximum single use rate: 2.0 Pints/acre (1.5 lbs Propamocarb/A).
x Minimum reapplication interval: 5 days
x Regardless of rate, do not exceed 2 applications per crop cycle.
x Do not use on more than 4 crop cycles per acre per year.
x DO NOT apply more than 8 pints of PREVICUR FLEX FUNGICIDE (6.0 lbs. total a.i.) per acre 
per year.
x DO NOT apply within 2 days of harvest for leafy greens subgroup 4-16A.
x When used at 2.0 pints/acre (1.5 lbs Propamocarb/A), DO NOT exceed 4 applications of

12
Previcur Flex Fungicide per year. When used at 1.33 pints/acre (0.9975 lbs Propamocarb/A),
DO NOT exceed 6 applications per year.
LIMA BEANS
(For Use East of the Rocky Mountains Only)
Apply preventatively as a foliar spray in sufficient water to obtain thorough coverage. PREVICUR 
FLEX FUNGICIDE may be applied through chemigation (including drip and transplanting/setting 
water), see APPLICATION THROUGH IRRIGATION SYSTEMS section.
Disease
PREVICUR FLEX
FUNGICIDE
(Pints per Acre)
Applications Instructions
Downy mildew
(Phytophthora 
phaesoli)
2.0
(1.5 lbs
Propamocarb/A)
Make foliar applications when conditions first become 
favorable for disease development, but before 
infection. Continue applications on a 7
-day interval until 
threat of disease is over. 
Pod rot
(Phytophthora 
capsici)
(suppression)
1.2 – 2.0
(0.9-1.5 lbs
Propamocarb/A)
Make foliar applications when conditions first become 
favorable for disease development, but before 
infection. Continue applications on a 7
-day interval until 
threat of disease is over.
Pythium root rots 
and seedling 
diseases 
(Pythium spp.)
2.0
(1.5 lbs
Propamocarb/A)
PREVICUR FLEX FUNGICIDE can be applied by 
directing nozzles to the lower portions of the plants and 
surrounding soil, or via drip irrigation, transplant/setting 
water, or by sprinklers.
Restrictions 
x Maximum single use rate: 2.0 Pints/acre (1.5 lbs Propamocarb/A).
x Minimum reapplication interval: 7 days
x Regardless of rate, do not exceed 2 applications per crop cycle.
x Do not use on more than 4 crop cycles per acre per year.
x DO NOT apply more than 8 pints of PREVICUR FLEX FUNGICIDE (6.0 lbs. total a.i.) per acre 
per year.
x DO NOT harvest within 12 hours of the last application of PREVICUR FLEX FUNGICIDE.
x When used at 2.0 pints/acre (1.5 lbs Propamocarb/A), DO NOT exceed 4 applications of 
Previcur Flex Fungicide per year. When used at 1.2 pints/acre (0.9 lbs Propamocarb/A), DO 
NOT exceed 6 applications per year.

13
FRUITING VEGETABLES 8-10
TOMATO SUBGROUP 8-10A
Bush tomato; cocona; currant tomato; garden hu ckleberry; goji berry; groundcherry; naranjilla; 
sunberry; tomatillo; tomato; tree tomato; cultivars, varieties, and/or hybrids of these 
PREVICUR FLEX FUNGICIDE mixed with chlorothalonil , maneb, or mancozeb is an excellent tank-
mix combination for control of late blight ( Phytophthora infestans) and early blight ( Alternaria solani). 
Follow use directions and rates specified for lat e blight control. PREVICUR FLEX FUNGICIDE may 
be applied through chemigation (including drip and transplant/setting water), see APPLICATION 
THROUGH IRRIGATION SYSTEMS above. Always cons ult your agricultural advisor, University 
contact, or Extension Service for directed pest management practices for your area.
Disease
PREVICUR FLEX 
FUNGICIDE
(Pints per Acre)
Applications Instructions
Late blight 
(Phytophthora 
infestans)
Early blight 
(Alternaria solani)
0.7-1.5
(0.525-1.125 lbs
Propamocarb/A)
+
Tank-mix partner
Apply on a 10 day interval. The low rate and longer spray 
interval may be used early in the season before canopy 
closure when disease pressure may be light. After canopy 
closure switch to the higher rate and use the shorter 
intervals.
Pythium root rots 
and seedling 
diseases (Pythium 
spp.)
1.5
(1.125 lbs
Propamocarb/A)
PREVICUR FLEX FUNGICIDE can be applied by directed 
nozzles to the lower portions of the plants and 
surrounding soil, or via drip irrigation, transplant/setting 
water, or by sprinklers.
Restrictions 
x Maximum single use rate: 1.5 pints/acre (1.125 lbs Propamocarb/A).
x Minimum reapplication interval: 10 days
x Regardless of rate, do not exceed 2 applications per crop cycle.
x Do not use on more than 4 crop cycles per acre per year.
x DO NOT apply more than 7.5 pints of PREVICUR FLEX FUNGICIDE (5.625 lbs. total a.i.) per 
acre per year.
x DO NOT apply within 5 days of harvest. 
x When used at 1.5 pints/acre (1.125 lbs Propamocarb/A), DO NOT exceed 5 applications of 
Previcur Flex Fungicide per year. When used at 0.7 pints/acre (0.525 lbs Propamocarb/A), DO
NOT exceed 8 applications per year.

14
PEPPER AND EGGPLANT SUBGROUPS 8-10B AND 8-10C
African eggplant; bell pepper; eggplant; martynia; okra; pea eggplant; pepino; non-bell pepper; 
roselle; scarlet eggplant; cultivars, varieties, and/or hybrids of these.
Apply preventatively as a foliar spray in sufficien t water to obtain thorough coverage. PREVICUR 
FLEX FUNGICIDE may be applied through chemigation (including drip and transplant/setting water), 
see APPLICATION THROUGH IRRIGATION SYSTEMS above. 
Disease PREVICUR FLEX 
FUNGICIDE
(Pints per Acre)
Applications Instructions
Phytophthora 
blight: 
Suppression only 
(Phytophthora 
capsici
)
1.2
(0.9 lbs
Propamocarb/A)
Use PREVICUR FLEX FUNGICIDE as a foliar spray in a 
preventive program. Begin applications when conditions 
are favorable for disease, but before infection. Continue 
on 7
-14 day intervals until the threat of disease is over.
When applying PREVICUR FLEX FUNGICIDE at intervals 
longer than 7 days, alternate with an application of a 
contact fungicide midway between PREVICUR FLEX 
FUNGICIDE applications.
For 
Phytophthora capsici suppression, ground application 
must be made with a tractor-mounted boom sprayer 
equipped with three nozzles per row with two nozzles 
directed to ensure thorough coverage of the lower portion 
of the plants.
With moderate to heavy disease pressure use shorter
specified spray intervals. Check with your local 
Cooperative Extension Service if you are unsure about 
whether these conditions exist.
Pythium root rots 
and seedling 
diseases (Pythium 
spp.)
1.2
(0.9 lbs
Propamocarb/A)
PREVICUR FLEX FUNGICIDE can be applied by directed 
nozzles to the lower 
portions of the plants and 
surrounding soil, or via drip irrigation, transplant/setting 
water, or by sprinklers.
Restrictions 
x Maximum single use rate: 1.2 pints/acre (0.9 lbs Propamocarb/A).
x Minimum reapplication interval: 7 days
x Regardless of rate, do not exceed 2 applications per crop cycle.
x Do not use on more than 4 crop cycles per acre per year.
x DO NOT apply more than 6 pints of PREVICUR FLEX FUNGICIDE (4.5 lbs. total a.i.) per acre 
per year.
x DO NOT apply within 5 days of harvest.
x DO NOT exceed 5 applications of Previcur Flex Fungicide per year.

15
STARFRUIT[1]
Disease PREVICUR FLEX 
FUNGICIDE
(Pints per Acre)
Applications Instructions
Pythium root rot 
(Pythium spp.)
2.0
(1.5 lbs
Propamocarb/A)
Apply PREVICUR FLEX FUNGICIDE as soil directed 
spray application under the tree canopy in a minimum of 
80 gallons per acre. Begin applications when conditions 
are favorable for disease, but before infection. Follow with 
a second application after a minimum interval of 30 days. 
Application requires irrigation immediately after the 
application (within 6 hours) with one half (1/2) to one third 
(1/3) inch of water to properly move the PREVICUR FLEX 
FUNGICIDE into the root zone. 
Irrigation can be done as overhead sprinkler irrigation or 
garden hose drench to the drip line. 
Note that the treated area for directed applications is 
calculated as row spacing X number of rows X plot length.
Restrictions 
x Maximum single use rate: 2 Pints/acre (1.5 lbs Propamocarb/A).
x Minimum reapplication interval: 30 days
x Maximum number of applications per year: 2
x DO NOT apply more than 4 pints of PREVICUR FLEX FUNGICIDE (3.0 lbs. total a.i.) peracre 
per year
x DO NOT apply within 1 days of harvest.
x [1Not for use in CA without a supplemental label.]

16
TUBEROUS AND CORM VEGETABLES SUBGROUP 1C 
Arracacha; arrowroot; artichoke, Chinese; artichoke, Jerusalem; canna, edible; cassava, bitter and 
sweet; chayote (root); chufa; dasheen (taro); ginger; leren; potato; sweet potato; tanier; turmeric; yam 
bean; yam, true.
PREVICUR FLEX FUNGICIDE mixed with chlorothalonil , maneb, or mancozeb is an excellent tank-
mix combination for control of late blight ( Phytophthora infestans) and early blight ( Alternaria solani).
Follow use directions and rates specified for late bli ght. When the threat of early blight is moderate to 
severe, then additional amounts of the tank-m ix partner are needed. Read and follow the use 
directions on the tank-mix partner label. PREVICUR FLEX FUNGICIDE may be applied through 
chemigation, see APPLICATION THROUG H IRRIGATION SYSTEMS above. Tuber blight 
suppression will result as a consequence of good foliar blight control, complete killing of vines before 
harvest, and proper tuber storage conditions. Always consult your agricultural advisor, University 
contact, or Extension Service for directed pest management practices for your area.
Disease
PREVICUR FLEX
FUNGICIDE
(Pints per Acre)
Applications Instructions
Late blight 
(Phytophthora 
infestans)
Early blight 
(Alternaria solani)
0.7-1.2
(0.525-0.9 lbs
Propamocarb/A)
+
Tank-mix partner
Apply on a 7-10 day interval. The low rate and longer 
spray interval may be used early in the season before 
canopy closure when disease pressure may be light. After 
canopy closure switch to the higher rate and use the 
shorter intervals.
Restrictions 
x Maximum single use rate: 1.2 pints/acre (0.9 lbs Propamocarb/A).
x Minimum reapplication interval: 7 days
x When applied at the lower single use rate of 0.7 pints per acre (0.525 lbs Propamocarb/A), DO
NOT exceed 8 applications per acre per year, and for applications made at the upper single use 
application rate of 1.2 pints per acre (0.9 lbs Propamocarb/A), do not exceed 5 applications per 
acre per year.
x DO NOT apply more than 6.0 pints of PREVICUR FLEX FUNGICIDE (4.5 lbs. total a.i.) per acre 
per year.
x DO NOT apply within 14 days before harvest.
x For aerial application, apply a minimum of 6 gallons of spray mixture per acre to assure uniform 
coverage.

17
GREENHOUSE USE
Apply PREVICUR FLEX FUNGICIDE to greenhouse cucurbits, leaf lettuce, peppers and tomatoes for 
prevention of root rot and damping-off caused by Pythium spp. and Phytophthora spp. PREVICUR 
FLEX FUNGICIDE requires no agitation after initial mi xing and is effective at all stages of plant 
propagation and development including seeding, transplanting and potting. Stock solutions of 
PREVICUR FLEX FUNGICIDE must be used within one day of mixing. DO NOT mix with other 
products. Prevent intense sunlight after applic ation by applying PREVICUR FLEX FUNGICIDE in the 
evening. DO NOT apply PREVICUR FLEX FUNGICIDE to dry rockwool or other growing media 
without first pre-wetting with water. Phytotoxicit y may occur if PREVICUR FLEX FUNGICIDE is 
applied directly to dry growing media, especially in intense sunlight.
GREENHOUSE APPLICATION – Cucurbits, Leaf Lettuce, Peppers and Tomato
.
USE PATTERN USE DIRECTIONS
PRESEEDING 
AND/OR SEEDLING 
TREATMENT
(before transplanting)
ROCK WOOL CUBE SATURATION1:
Prepare a 1:1000 stock solution ( for example - 12.8 fl. oz. product in 100 
gallons water). Apply as a drench to pre- wet cubes at a rate of 3.4 fl. oz. 
(100 ml) to 6.8 fl. oz. (200 ml) stock solution per cube to saturate. (100 
gallons applied properly will treat 3800 to 1900 plants, respectively).
SEED BEDS – SOIL or SOILLESS2:
In a minimum of 50 gallons water/1000 sq. ft apply:
At seeding – 32 fl. oz. product/1000 sq. ft. (1.5 lbs. a.i./1000 sq. ft). 
After emergence for food production - 16 fl. oz. product/1000 sq. ft. 
(0.75 lbs. a.i./1000 sq. ft).
GREENHOUSE 
TREATMENT
(after transplanting)
DRIP SYSTEM or SOIL DRENCH1:
Prepare a 1:1000 stock solution (for example - 12.8 fl. oz. product in 100 
gallons water). For the first two weeks after transplanting, apply through 
drip system at a rate of 3.4 fl. oz. (100 ml) stock solution per cube to 
avoid runoff and cover root area. After 2 weeks, apply through drip 
system at a rate of 3.4 fl. oz. (100 ml) to 6.8 fl. oz. (200 ml) stock solution 
per cube. (100 gallons applied properly will treat 3800 to 1900 plants, 
respectively).
Evening applications of PREVICUR FLEX FUNGICIDE by drip irrigation 
will reduce leaching or washing of the product from the root zone and 
may result in improved control. See statements in the “How to Use” 
section above regarding potential phytotoxicity.
FOLIAR TREATMENT (leaf lettuce only)3:
See foliar field use direction according to crop of interest on this label.
DO NOT harvest for 2 days after greenhouse foliar treatment.

18
MAXIMUM USE 
RATES
NUMBER OF 
PLANTS 
PER ACRE
AMOUNT PRODUCT PER 
APPLICATION PER ACRE
AMOUNT PRODUCT PER 
CROPPING CYCLE
6,000
10,000
14,000
41.3 fl. oz. (1.94 lbs. a.i./A)
68.8 fl. oz. (3.23 lbs. a.i./A)
96.4 fl. oz. (4.52 lbs. a.i./A)
248 fl. oz. (11.6 lbs. a.i./A)
413 fl. oz. (19.4 lbs. a.i./A)
578 fl. oz. (27.1 lbs. a.i./A)
RESTRICTIONS
x Minimum reapplication interval: Tomato 7 days, Leaf Lettuce 5 days, Cucurbits 7 days, 
Peppers 7 days
x Maximum yearly rate: for 6,000 plants per acre: 248 fl oz/acre (11.6 lbs. a.i./A); for 10,000 
plants per acre: 413 fl oz/acre (19.4 lbs. a.i./A); for 14,000 plants per acre: 578 fl oz/acre
(27.1 lbs. a.i./A)
x Maximum number of applications per year: 6 
x Do not apply more than 4 total applications after transplanting per cropping cycle.
1 Maximum single use rate: for 6,000 plants per acre: 41.3 fl oz/acre (1.94 lbs. a.i./A); for 10,000 
plants per acre: 68.8 fl oz/acre (3.23 lbs. a.i./A); for 14,000 plants per acre: 96.4 fl oz/acre (4.52 lbs. 
a.i./A)
2 DO NOT apply more than 2 preseeding and/or seedling applications per cropping cycle (max 
single 1.5 lbs. a.i./1000 sq. ft. and max per crop cycle 2.25 lbs. a.i./1000 sq. ft )
3 For transplant production and greenhouse production (leaf lettuce only), DO NOT apply more than 
2 foliar applications per cropping cycle with a minimum of 1 days before the transplants are set to 
leave the greenhouse (max single 1.5 lbs. a.i./A and max per crop cycle leaf lettuce 3.0 lbs a.i./A). 
For greenhouse production, DO NOT harvest for 2 days after greenhouse foliar treatment (2-day 
PHI).

19
STORAGE AND DISPOSAL
DO NOT contaminate water, food, or feed by storage or disposal.
STORAGE: Store in original container and keep tightly closed. Store in a cool dry place.
PESTICIDE DISPOSAL: Pesticide wastes are toxic. Improper disposal of excess pesticide, pesticide 
spray, or rinsate is a violation of federal law. If these wastes cannot be disposed of by use according 
to label directions, contact your State Pesticide or Environmental Control Agency, or the Hazardous 
Waste representative at the nearest EPA Regional Office for guidance.
CONTAINER HANDLING
[Non-Refillable Containers]
Rigid, Non-refillable containers (equal to or less than 5 gallons)
Non-refillable container. DO NOT reuse or refill this container. Triple rinse or pressure rinse container 
(or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into 
application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the 
container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment 
or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to 
drip. Repeat this procedure two more times.
Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and 
continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over 
application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing 
nozzle in the side of the container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10 
seconds after the flow begins to drip.
Once container is rinsed, offer for recycling if available or puncture and dispose of in a sanitary landfill 
or by incineration.
Rigid Non-refillable Containers that are too large to shake (i.e., with capacities greater than 5 
gallons or 50 lbs)
Non-refillable container. DO NOT reuse or refill this container. Refer to Bottom Discharge IBC or Top 
Discharge IBC, Drums, Kegs information as follows.
Bottom Discharge IBC (e.g. – Schuetz Caged IBC or Snyder Square Stackable)
Pressure rinsing the container before final disposal is the responsibility of the person disposing of the 
container. To pressure rinse the container before final disposal, empty the remaining contents from 
the IBC into application equipment or mix tank. Raise the bottom of the IBC by 1.5 inches on the side 
which is opposite of the bottom discharge valve to promote more complete product removal. 
Completely remove the top lid of the IBC. Use water pressurized to at least 40 PSI to rinse all interior 
portions. Continuously pump or drain rinsate into application equipment or rinsate collection system 
while pressure rinsing. Continue pressure rinsing for 2 minutes or until rinsate becomes clear. 
Replace the lid and close bottom valve.
Top Discharge IBC, Drums, Kegs (e.g.– Snyder 120 Next Gen, Bonar B120, Drums, Kegs)
Triple rinsing the container before final disposal is the responsibility of the person disposing of the 
container. To triple rinse the container before final disposal, empty the remaining contents from this

20
container into application equipment or mix tank. Fill the container at least 10 percent full with water. 
Agitate vigorously or recirculate water with the pump for 2 minutes. Rinse all interior surfaces. Pour or 
pump rinsate into application equipment or rinsate collection system. Repeat this procedure two more 
times.
Once container is rinsed, offer for recycling if available or puncture and dispose of in a sanitary landfill 
or by incineration.
Top Discharge IBC, Drums, Kegs (e.g.– Snyder 120 Next Gen, Bonar B120, Drums, and Kegs)
Triple rinsing the container before final disposal is the responsibility of the person disposing of the 
container. To triple rinse the container before final disposal, empty the remaining contents from this 
container into application equipment or mix tank. Fill the container at least 10 percent full with water. 
Agitate vigorously or recirculate water with the pump for 2 minutes. Rinse all interior surfaces. Pour or 
pump rinsate into application equipment or rinsate collection system. Repeat this procedure two more 
times. 
Once container is rinsed, offer for recycling if available or puncture and dispose of in a sanitary landfill 
or by incineration. 
Non-Refillable Fiber Drums with Liners
Non-refillable container. DO NOT reuse or refill this container. Completely empty liner by shaking 
and tapping sides and bottom to loosen clinging particles. Empty residue into application equipment, 
then offer for recycling if available or dispose of in a sanitary landfill or by incineration. If drum is 
contaminated and cannot be reused, dispose of it in the manner required for its liner.
Non-Rigid, Non-refillable Containers 
Nonrefillable container. DO NOT reuse or refill this container. Completely empty container into 
application equipment. Then offer for recycling if available or dispose of in a sanitary landfill or by 
other procedures approved by state and local authorities.
[Refillable Containers]
Refillable container. Refer to Bottom Discharge IBC or Top Discharge IBC, Drums, Kegs information 
as follows. Refill this container with pesticide only. DO NOT reuse this container for any other 
purpose. Contact your Ag retailer or Bayer CropScience for container return, disposal and recycling 
information.
Bottom Discharge IBC (e.g. – Schuetz Caged IBC or Snyder Square Stackable)
Pressure rinsing the container before final disposal is the responsibility of the person disposing of the 
container. Cleaning before refilling is the responsibility of the refiller. To pressure rinse the container 
before final disposal, empty the remaining contents from the IBC into application equipment or mix 
tank. Raise the bottom of the IBC by 1.5 inches on the side which is opposite of the bottom discharge 
valve to promote more complete product removal. Completely remove the top lid of the IBC. Use 
water pressurized to at least 40 PSI to rinse all interior portions. Continuously pump or drain rinsate 
into application equipment or rinsate collection system while pressure rinsing. Continue pressure 
rinsing for 2 minutes or until rinsate becomes clear. Replace the lid and close bottom valve.

21
Once container is rinsed, offer for recycling if available or puncture and dispose of in a sanitary landfill 
or by incineration.
Top Discharge IBC, Drums, Kegs (e.g.– Snyder 120 Next Gen, Bonar B120, Drums, Kegs)
Triple rinsing the container before final disposal is the responsibility of the person disposing of the 
container. Cleaning before refilling is the responsibility of the refiller. To triple rinse the containers 
before final disposal, empty the remaining contents from this container into application equipment or 
mix tank. Fill the container at least 10 percent full with water. Agitate vigorously or recirculate water 
with the pump for 2 minutes. Rinse all interior surfaces. Pour or pump rinsate into application 
equipment or rinsate collection system. Repeat this procedure two more times.
Once container is rinsed, offer for recycling if available or puncture and dispose of in a sanitary landfill 
or by incineration. 
End users are authorized to remove tamper-evident cables as required to remove the product from 
the container unless the container is equipped with one-way valves and refilling or returning is 
planned. If this is the case, end-users are not authorized to remove tamper-evident cables, remove 
one-way valves, or clean container.

22
IMPORTANT: READ BEFORE USE
Read the entire Directions for Use, Conditions, Disclaimer of Warrant ies and Limitations of Liability 
before using this product. If terms are not acceptable, return the unopened product container at once.
By using this product, user or buyer accepts the following Conditi ons, Disclaimer of Warranties and 
Limitations of Liability.
CONDITIONS: The directions for use of this product are believed to be adequate and must be 
followed carefully. However, it is impossible to eliminate all risks associated with the use of this 
product. Crop injury, ineffectiveness or other uninte nded consequences may result because of such 
factors as weather conditions, presenc e of other materials, or the manner of use or appl ication, all of 
which are beyond the control of Bayer CropScience. TO THE EXTENT CONSISTENT WITH 
APPLICABLE LAW, all such risks shall be assumed by the user or buyer.
DISCLAIMER OF WARRANTIES: TO THE EXTENT CONSISTENT WITH APPLICABLE LAW ,
BAYER CROPSCIENCE MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, OF 
MERCHANTABILITY OR OF FITNESS FOR A PA RTICULAR PURPOSE OR OTHERWISE, THAT 
EXTEND BEYOND THE STATEMENTS MADE ON THIS LABEL. No agent of Bayer CropScience is 
authorized to make any warranties beyond those co ntained herein or to modify the warranties 
contained herein. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW , BAYER
CROPSCIENCE DISCLAIMS ANY LIABILITY WHATSOEVER FOR SPECIAL, INCIDENTAL OR 
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT.
LIMITATIONS OF LIABILITY: TO THE EXTENT CONSISTENT WITH APPLICABLE LAW , THE 
EXCLUSIVE REMEDY OF THE USER OR BUYER FOR ANY AND ALL LOSSES, INJURIES OR 
DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, WHETHER IN 
CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, SHALL NOT EXCEED 
THE PURCHASE PRICE PAID, OR AT BAYER CROPSCIENCE’SELECTION, THE REPLACEMENT OF 
PRODUCT.
NET CONTENTS: 2.64 US Gallons (10 liters)
PREVICUR is a registered trademark of Bayer.
Produced for
Bayer CropScience LP
800 N. Lindbergh Blvd.
St. Louis, MO 63167
1-866-99BAYER (1-866-992-2937)
PREVICUR FLEX FUNGICIDE (PENDING) 02/22/2023, 02/23/2024, 07/26/2024