crop-chem-docs/corpus/epa_ppls/279-3562.md

# REPORT HERBICIDE

- EPA Reg No: **279-3562**
- Registrant: FMC CORPORATION 
- Signal word: Caution
- Active ingredients: Chlorsulfuron (75%)
- Label accepted: 2008-07-11
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/067760-00081-20080711.pdf

---
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY 
WASHINGTON, D.C. 20460 
Ms. Carrie Tackema 
Cheminova Inc. 
1700 Route 23, Suite 300 
Wayne, NJ 07470 
OFFICE OF 
PREVENTION. PESTICIDES AND 
TOXIC SUBSTANCES 
J 0 L 1 J 21!J:ff> 
Subject: Label Notifications for Pesticide Registration Notice 2007-4 
Dear Ms. Tackema, 
The Agency is in receipt of your Applications for Pesticide Notification under Pesticide 
Registration Notice (PRN) 2007-4 dated May 14, 2008 (and corrected labels sent June 11,2008) 
for the following products: 
Metsulfuron-methyl Technical 
Tribenuron-methyl Technical 
Nicosulfuron Technical 
Thifensulfuron-methyl Technical 
Accurate Herbicide 
Nuance Herbicide 
Nic-It Herbicide 
Accurate Extra Herbicide 
Harass Herbicide 
Nimble Herbicide 
Chlorsulfuron Technical 
Chisum Herbicide 
Report Herbicide 
Report Extra Herbicide 
(EPA Registration Number 4787-50) 
(EPA Registration Number 4787-53) 
(EPA Registration Number 4787-54) 
(EPA Registration Number 4787-56) 
(EPA Registration Number 67760-68) 
(EPA Registration Number 67760-73) 
(EPA Registration Number 67760-74) 
(EPA Registration Number 67760-76) 
(EPA Registration Number 67760-77) 
(EPA Registration Number 67760-78) 
(EPA Registration Number 67760-79) 
(EPA Registration Number 67760-80) 
(EPA Registration Number 67760-81) 
(EPA Registration Number 67760-82) 
The Registration Division (RD) has conducted its review of these requests for their 
applicability under PRN 2007-4 and finds that the label changes requested fall within the scope 
ofPRN 2007-4. The labels submitted with the applications have been stamped ''Notification'' 
and will be placed in our records, along with this letter. 
Please be reminded that 40 CPR Part 156.140(a)(4) requires that a batch code, lot 
number, or other code identifying the batch of the pesticide distributed and sold be placed on 
nonrefillable containers. The code may appear either on the label (and can be added by non­
notificationiPR Notice 98-10) or durably marked on the container itself

If you have any questions, please call me directly at 703-305-6249 or Steve Schaible of 
my staff at 703-308-9362. 
Sincerely, 
~ 
Linda Arrington 
Notifications & Minor Formulations Team Leader 
Registration Division (7505P) 
Office of Pesticide Programs

Please read instructions on reverse before com letin form. 
EPA 
United States 
Environmental Protection Agency 
Washington, DC 20460 
o Registration 
o Amendment 
[8J Other 
1. Company/Product Number 
67760-81 
4. Company/Product (Name) 
REPORyrM Herbicide 
Application for Pesticide - Section 1 
2. EPA Product Manager 
James A. Tom kins 
PM# 
25 
oPP Identifier Number 
3. Proposed Classification 
~None o Restricted 
5. Name and Address of Applicant (Inc/ude ZIP Code) 
Chemin ova Inc. 
1700 Route 23, Suite 300 
Wayne, Nj 07470 
6. Expedited Review. In accordance with FIFRA Section 3 (c)(3)(b)(I), my product is similar 
or identical in composition and labeli"NbnFICATION 
EPA Reg. No. __ '--_ 
Product Name tJUL .112008 
o Check if this is a new address 
Section - II 
D Amendment - Explain below. o Final printed labels in response to Agency letter dated ___ _ 
D Resubmission in response to Agency letter dated ______ _ o "Me Too" Application 
~ Notification - Explain below. o Other - Explain below 
Explanation: Use additional page(s) ifnec:essary Section I and Section II 
*Contact: Carrie M. Tackema: carrie.tackema@cheminova.com or fax: 973-305-1382 
Section - III 
1. Material This Product Will Be Packa ed In: 
Child-Resistant Packaging 
D Yes* 
~No 
*Certijicatioll must be 
submitted 
3. Location of Net Contents Information 
~ Label [gI Container 
Unit Packaging 
DYes 
l:8J No 
If "Yes" 
Unit Packaging wgt. 
No. per 
container 
4. Size(s) Retail Container 
10 oz. - bulk 
6. Manner in Which Label is Affixed to Product [g] Lithograph 
~ Paper glued 
IZI Stenciled 
Water Soluble Packaging 
DYes 
~No 
2. Type of Container 
~ Metal 
~ Plastic 
If "Yes" 
Package wgt. 
No. per 
container 
D Glass 
I:8l Paper 
I:8l Other (Specify) -
fiber drums or sacks 
5. Location of Label Directions 
~On Label 
D On labeling accompanying product 
o Other ________ "'-- ______ _ 
Section - IV 
1. Contact Point (Complete items directly below for identification of individual to be contacled, if necessary, 10 process this application) 
Name Title Telephone No. (Include Area Code) 
Carrie M. Tackema Regulatory Affairs Manager, North America 973-305-(600·; x. 229 
l' 1,' ~~ 
Certification 6. Dat(,Ap~lic;.,tion Received 
1, ", C, 
(Stamped) 
" ~'l I 
,,"' '-"-' 
Affairs Mana er, North America 
5,2008 
EPA Form 8570-1 (Rev. 8-94) Previous editions are obsolete White- EPA File Copy (original) Yellow- ,'\;'[ll,i,cant Copy.

·' 
NonFfeATION 
JUL 112008 
ACTIVE INGREDIENT: 
REPORTTM 
herbicide 
Chlorsulfuron 2-Chloro-N-[( 4-methoxy-6-methyl-1 ,3, 5-triazin-2-yl)aminocarbonyl] 
·benzenesulfonamide 
Other Ingredients: 
Total: 
EPA Reg. No. 67760-81 EPA EST NO.: 
KEEP OUT OF REACH OF CHILDREN 
CAUTION 
75.0% 
25.0% 
100.0% 
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. 
(If you do not understand the label, find someone to explain it to you in detail.) 
IN CASE OFA MEDICAL EMERGENCY INVOLVING THIS PRODUCT, CALL TOLL FREE, 
. DAY OR NIGHT, 1-866-303-6950 
Read the entire label before using this product. 
Use only according to label instructions. 
Read the WARRANTY DISCLAIMER, INHERENT RISKS OF USE, and LIMITATION OF 
REMEDIES before buying or using. 
If terms are not acceptable, return product unopened without delay. 
SEE BELOW FOR ADDITIONAL PRECAUTIONARY STATEMENTS AND USE DIRECTIONS 
Manufactured for: 
CHEMINOVA INC. 
1700 Route 23 
Suite 300 
Wayne, NJ 07470 
www.cheminova.us.com 
REPORpM is a trademark of Cheminova 
1

REPORT HERBICIDE 
HIGHLIGHTS 
• For preemergence weed control in winter wheat and winter oat in selected areas . 
• For selective postemergence broad leaf weed control in both winter and spring wheat and 
barley and spring oat (winter oat in selected areas). 
• Postemergence rates are 1/6 to 1/3 ounce per acre (see APPLICATION information) . 
. • Apply postemergence to wheat, barley and oat from the 2-leaf stage but before boot (2-leaf to 
before flag leaf is visible on spring cereal crops in Pacific Northwest) . 
• May be applied by ground or by air. 
• Use in tank mixtures with other registered herbicides for broader spectrum weed control (see 
TANK MIXTURES). 
• Recommended for land primarily dedicated to long-term production of wheat, barley or oat 
(see CROP ROTATION section for recropping information). 
• Consult label text for complete instructions. 
Always read and follow label DIRECTIONS FOR USE. 
FIRST AID 
IF -Call a poison control center or doctor immediately for treatment advice. 
SWALLOWED: -Have person sip a glass of water if able to swallow. 
-Do not induce vomiting unless told to by a poison control center or doctor. 
-Do not give anything by mouth to an unconscious person. 
IF IN EYES: -Hold eye open and rinse slowly and gently with water for 15 to 20 minutes .. 
Remove contact lenses, if present, after the first 5 minutes, then continue 
rinsing eye. 
-Call a poison control center or doctor for treatment advice. 
Have a product container or label with you when calling a poison control center or doctor, 
or going for treatment. In case of emergency call toll free 1-866-303-6950. 
2

PRECAUTIONARY STATEMENTS 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
CAUTION 
Harmful if swallowed. Causes moderate eye irritation. Avoid contact with eyes or clothing. 
Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, 
or using tobacco. Remove and wash contaminated clot~ing before reuse. 
PERSONAL PROTECTIVE EQUIPMENT 
Some of the materials that are chemical-resistant to this product are listed below. If you want 
more options, follow the instructions for Category A on an EPA chemical resistance category 
selection chart. 
Applicators and other handlers must wear: 
-Long-sleeved shirt and long pants. 
·Chemical resistant gloves made of any waterproof material such as polyethylene or polyvinyl 
chloride. 
·Shoes plus socks. 
Discard clothing and other absorbent materials that have been drenched or heavily 
contaminated with this product. Follow manufacturer's instructions for cleaning/maintaining 
PPE. If no such instructions for washables, use detergent and hot water. Keep and wash PPE 
separately from other laundry. 
ENGINEERING CONTROLS STATEMENTS 
When handlers use closed systems or enclosed cabs in a manner that meets the requirements 
listed in the Worker Protection Standard (WPS) for agricultural pestiCides [40 CFR part 170.240 
(d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS. 
IMPORTANT: When reduced PPE is worn because a closed system is being used, handlers 
must be provided all PPE speCified above for "Applicators and other handlers" and have such 
PPE immediately available for use in an emergency, such as a spill or equipment break-down. 
User Safety Recommendations: 
USERS SHOULD: Wash hands before eating, drinking, chewing gum, using tobacco or using 
the toilet. 
ENVIRONMENTAL HAZARDS 
Do not apply directly to water, or to areas where surface water is present, or to intertidal areas 
below the mean high water mark. Do not contaminate water by cleaning of equipment or 
disposing of equipment washwaters or wastes. 
IMPORTANT 
REPORT herbicide is recommended for use on land primarily dedicated to the long-term 
production of wheat, barley, or oat. 
PESTICIDE HANDLING 
• Calibrate sprayers only with clean water away from the well site. 
• Make scheduled checks of spray equipment. 
• Assure accurate measurement of pestiCides by all operation employees. 
• Mix only enough product for the job at hand. 
• Avoid overfilling of spray tank. 
• Do not discharge excess material on the soil at a single spot in the field/grove or 
mixing/loading station. 
3

• Dilute and agitate excess solution and apply at labeled rates/uses. 
• Avoid storage .of pesticides near well sites. 
• When triple rinsing the pesticide container, be sure to add the rinsate to the spray mix. 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a manner inconsistent with its 
labeling. 
Do not apply this product in a way that will contact workers or other persons, either directly or 
through drift. Only protected handlers may be in the area during application. For any 
requirements specific to your State or Tribe, consult the agency responsible for pesticide 
regulation. 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard, 
40 CFR part 170. This Standard contains requirements for the protection of agricultural workers 
on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It 
contains requirements for training, decontamination, notification, and emergency assistance. It 
also contains specific instructions and exceptions pertaining to the statements on this label 
about personal protective equipment (PPE) and restricted-entry interval. The requirements in 
this box only apply to uses of this product that are covered by the Worker Protection Standard. 
Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 
4 hours. 
PPE required for early entry to treated areas that is permitted under the Worker Protection 
Standard and that 
involves contact with anything that has been treated, such as plants, soil, or water, is: 
·Coveralls. 
·Chemical resistant gloves made of any waterproof material. 
·Shoes plus socks. 
STORAGE AND DISPOSAL 
PESTICIDE STORAGE: Store product in original container only. Do not contaminate water, 
other 
pesticides, fertilizer, food or feed in storage. 
PRODUCT DISPOSAL: 
Nonrefillable containers equal to or less than 5 gallons: 
Do not reuse or refill this container. Offer for recycling if available. Triple rinse container (or equivalent) 
promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment 
or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container)4 full with water and 
recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for 
later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more 
times. 
Nonrefillable containers greater than 5 gallons: 
Do not reuse or refill this container. Offer for recycling if available. Triple rinse as follows: Empty the 
remaining contents into application equipment or mix tank. Fill the container)4 full with water. Replace 
and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete 
revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn the 
container over onto its other end and tip it back and forth several times. Empty the rinsate into application 
equipment or a mix tank and store rinsate for later use or disposal. Repeat this procedure two more times. 
REPORT must be used only in accordance with recommendations on this label or in separate 
published Cheminova recommendations. Cheminova will not be responsible for losses or 
damages resulting from the use of this product in any manner not specifically recommended by 
4

Cheminova. 
Do not apply this product through any type of irrigation system. 
REPORT herbicide is recommended for use on land primarily dedicated to the long-term 
production of wheat, barley, or oat. . 
APPLICATION TO CEREALS 
GENERAL INFORMATION 
REPORT is a dry-tlowable granule that controls weeds in wheat (including durum), triticale, 
barley, and spring oat. 
In addition, REPORT may also be used on winter oat in Texas, Western Oregon, and Western 
Washington. REPORT is mixed in water or directly into liquid nitrogen fertilizer solutions and 
applied as a uniform broadcast spray. A surfactant should be used in the spray mix unless 
otherwise specified on this label. 
Note: For definitions of portions of States recommended on this label, see listings of counties or 
area definitions on Crop Rotation Interval charts of this label. 
REPORT is noncorrosive, nonflammable, nonvolatile, and does not freeze. 
REPORT controls weeds by both preemergence and postemergence activity. For best 
preemergence results, apply REPORT before weed seeds germinate. Use sprinkler irrigation or 
allow rainfall to move REPORT 2 to 3" deep into the soil profile. 
For best postemergence results, apply REPORT to young, actively growing weeds. The use 
rate depends upon the weed spectrum and size of weeds at time of application. 
The degree and duration of control may depend on the following: 
- weed spectrum and infestation intensity 
- weed size at application 
-environmental conditions at and following treatment. 
Environmental Conditions and Biological Activity 
REPORT is absorbed through the roots and foliage of broad leaf weeds, rapidly inhibiting their 
growth. One to 3 weeks after application to weeds, leaves of susceptible plants appear 
chlorotic, and the growing point subsequently dies. Postemergent application of REPORT 
provides the best control in vigorously growing crops that shade competitive weeds. Weed 
control in areas of thin crop stand or seeding skips may not be as satisfactory. However, a crop 
canopy that is too dense at application can intercept spray and reduce weed control. 
REPORT may injure crops that are stressed from adverse environmental conditions (such as 
extreme temperatures or moisture), abnormal soil conditions, or cultural practices. In addition, 
different varieties of the crop may be sensitive to treatment with REPORT under otherwise 
normal conditions. Treatment of such varieties may injure crops. 
In warm, moist conditions, the expression of herbicide symptoms is accelerated in weeds; in 
cold, dry conditions, expression of herbicide symptoms is delayed. In addition, weeds hardened­
off by drought stress are less susceptible to REPORT. 
Rainfall is needed to move REPORT into the soil for preemergence weed control, but 
postemergence weed control may be reduced if rainfall occurs soon after application. 
5 
~( . 
.. d-~

USE RATES 
Preemergence 
Winter oat 
Texas,Western Oregon and Western Washington only: 
Apply REPORT at 1/3 oz per acre. 
Texas: Apply REPORT up to 1/2 oz per acre where annual ryegrass is the problem. 
Winter wheat 
North Central Texas and Southern Oklahoma only: Apply REPORT at 1/2 oz per acre for 
suppression of annual ryegrass. 
Postemergence ' 
Apply REPORT at 1/6 to 1/3 oz per acre. 
Use 1/6 oz per acre for short-term control or suppression; use 1/3 oz per acre for soil residual 
weed control. Where soil pH is 6.5 or lower, use 1/3 oz per acre where maximum soil residual 
weed control is desired. Do not use less than 1/6 oz per acre. 
FREQUENCY OF APPLICATION 
The maximum use rates for REPORT are determined based on the soil pH, soil temperature, 
and soil moisture for a region. Based on these factors, REPORT use should be limited to the 
maximum use rates and minimum application intervals specified below. For more information on 
soil pH, soil temperature, soil moisture, and recropping, see Crop Rotation. 
Location Maximum Application Rate REPORT Minimum 
(ozlA) Application Interval 
N. Central TX, 
Southern OK 
Preemergence use 1/2 Once per crop period 
Postemergence use 1/3 Once per crop period 
Note: REPORT can be used as either pre or postemergence once per crop period, but not both 
pre and post in the same season. 
Central & E. KS 1/3 Once per crop period 
(East of Hwy. 183) 
S. Central NE 
OK 
(East of the panhandle 
except Southern OK) 
TX 
(East of the panhandle 
except N. Central TX) 
W. Central & Western KS 1/3 Once every 36 months 
(West of Hwy. 183) 
Eastern NM 
Western NE 
OK panhandle 
TX panhandle 
CA, 10, OR, WA & UT 1/3 Once every 18 months 
6

APPLICATION TIMING 
REPORT can be used preemergence on winter wheat in North Central Texas and Southern 
Oklahoma only and preemergence on winter oat in Texas, Western Oregon, and Western 
Washington only. 
Apply REPORT after planting seed, but before the crop emerges. Rainfall or sprinkler irrigation. 
following treatment is necessary to activate REPORT before weed seeds 
germinate and develop an established root system. Wheat and oat seeds should be planted at 
least 1" deep. 
In the Pacific Northwest, do not apply REPORT preemergence if cold or dry weather conditions 
exist. Wait until the weather improves and the crop is growing vigorously before making the 
application (see below). Preemergence applications of REPORT are not recommended where 
organophosphate insecticides (such as "Di-Syston", etc.) have been used as an in-furrow 
treatment, as crop injury may result. 
Do not apply REPORT preemergence to barley. 
Postemergence to Winter Wheat, Winter Barley. and Triticale in all areas and 
Postemergence to Winter Oat in Texas. Western Oregon and Western Washington only. 
Apply in the fall or spring anytime after the crop is in the 2-leaf stage, but before boot. 
Do not apply during boot or early heading as crop injury may result. 
Treat late-seeded wheat or barley after the crop has started to tiller as the combined effect of 
herbicide stress and stress from cold weather and/or moisture could cause crop injury. 
In the Pacific Northwest, to avoid possible crop injury from the combined effects of herbicide 
stress and severe winter weather, do not apply REPORT during late fall, winter or early spring 
unless crop is well established and has started to tiller. 
REPORT should not be used within 60 days of crop emergence where organophosphate 
insecticides (such as "Di-Syston", etc.) have been used as an in-furrow treatment, since crop 
injury may result. 
Postemergence to Spring Wheat, Durum*, Spring Barley. Triticale, and Spring Oat 
In the Pacific Northwest, apply REPORT to crops anytime from the 2-leaf stage through the 
second joint stage but before the flag leaf is visible. 
In all other areas, apply REPORT anytime from the 2-leaf stage but before boot. 
*Note: Apply to Vic durum after early tillering, but before boot. 
WEEDS CONTROLLED 
REPORT effectively controls the following weeds when applied at the rates shown: 
1/6·1/4 oz per acre 
Blue mustard 
Conical catchfly 
. Curly dock 
Cutleaf eveningprimrose 
Field pennycress 
Flixweed** 
Hempnettle 
Henbit 
Mayweed 
Pineappleweed 
Prostrate pigweed 
Redroot pigweed 
Shepherd's purse 
Smooth pigweed 
Tansymustard** 
Treacle mustard 
Tumble mustard (Jim Hill) 
Waterpod 
7

Miners lettuce 
1/3 oz per acre 
Bur beakchervil 
Buttercup 
Coast fiddleneck (tarweed) 
Common chickweed 
Common groundsel . 
Corn spurry 
Cow cockle 
False chamomile 
Wild mustard 
Falseflax 
Ladysthumb 
Lambsquarters** 
Mouseear chickweed 
Purslane (common) 
Redstem filaree 
White cockle 
Wild carrot 
Wild turnip 
WEEDS PARTIALLY CONTROLLED* 
REPORT partially controls the following weeds when applied at the rates shown: 
1/3 oz per acre 
Annual ryegrass** 
Bedstraw 
Canada thistle** 
Corn gromwell 
Kochiat:t: 
. Pennsylvania smartweed 
Prickly lettucet 
Prostrate knotweed** 
Russian thistlet:j: 
Sunflower** . 
Speedwell 
Wild buckwheat ... * 
Wild garliclWild onion** 
Wild radish** 
* Partially controlled we.eds exhibit a visual reduction in numbers as well as a significant loss of 
vigor. For better results, use 1/3 oz REPORT per acre and include a tankmix partner (refer to 
Tank Mixtures). 
** See Specific Weed Problems for more information. 
t Naturally occurring resistant biotypes of these weeds are known to occur in the Central Plains 
and the Pacific Northwest. See Tank -Mixtures and Resistance for additional information. 
:t: Use REPORT to control these weeds in Central Kansas, Central Nebraska, Central 
Oklahoma, and North Central Texas only. 
SURFACTANTS 
Unle~s otherwise specified, add a nonionic surfactant having at least 80% active ingredient at 
0.25 to 0.5% vlv (1 to 2 qt per 100 gal of spray solution). 
The higher rate is particularly useful with spray volumes of 5 GPA or less and when using low 
rates of REPORT. I 
Consult your Agricultural dealer or applicator for a listing of approved surfactants. 
Antifoaming agents may be used if needed. 
Do not use low rates of liquid fertilizer as a substitute for surfactant. 
GROUND APPLICATION 
To obtain optimum spray distribution and thorough coverage, use flat-fan or low-volume flood 
nozzles. 
When using flat-fan nozzles, use a spray volume of at least 3 gal per acre (GPA). When using 
flood jet or "Raindrop RA" nozzles, use higher spray volume (minimum 20 GPA) to ensure 
thorough coverage. However, REPORT may not be applied at less than 10 GPA when using 
small orifice flooding nozzles such as flood jet TK 5 to TK 7.5 or equivalent. . 
These flooding nozzles must be on a 30-inch spacing or not less than 13 GPA when on a 40-
8

inch spacing. It is essential to overlap the nozzles 100% for all spacings. 
Use screens that are 50-mesh or larger. 
AERIAL APPLICATION 
Use nozzle types and arrangements that provide optimum spray distribution and maximum 
coverage at 1 to 5 GPA. Use at least 3 GPA in Idaho, Oregon, or Utah. 
When applying REPORT by air in areas where sensitive crops are nearby, use solid stream 
nozzles oriented straight back. Adjust swath to avoid spray drift damage to downwind sensitive 
crops and/or use ground equipment to treat border edge of field. See "Spray Orift Management" . 
section of this label. 
PRODUCT MEASUREMENT 
REPORT is measured using the REPORT volumetric measuring cylinder. The degree of 
accuracy of this cylinder varies by ± 7.5 %. For more precise measurement, use scales 
calibrated in ounces. J . 
TANK MIXTURES 
REPORT may be tank mixed with other suitable registered herbicides to control weeds listed 
under WEEDS PARTIALLY CONTROLLED, weeds resistant to REPORT, or weeds not listed 
under WEEDS CONTROLLED. Read and follow all manufacturer's label recommendations for 
the companion herbicide. If those recommendations conflict with this label, do not tank mix the 
herbicide with REPORT. 
With 2,4-D (amine or ester) or MCPA (amine or ester) 
REPORT can be used annually as a tank-mix treatment with 2,4-0 or MCPA (preferably ester 
. formulations) herbicides after weeds have emerged. For best results, use 1/6 to 1/3 oz of 
REPORT per acre; add 2,4-0 or MCPA herbicides to the tank at 1/4 to 1/21b active ingredient. 
Surfactant may be added to the mixture at 1/2 to 1 qt per 100 gal of spray solution; however, 
adding surfactant may increase the potential for crop injury. 00 not add a surfactant when -
REPORT plus 2,4-0 or MCPA is applied with liquid fertilizer. 
Apply REPORT plus MCPA after the 3- to 5-leaf stage but before boot. Apply REPORT plus 
2,4-0 after tillering (refer to appropriate 2,4-0's manufacturer's label), but before boot. Applying 
a tank mixture of REPORT and 2,4-0 or MCPA, with liquid fertilizer when temperatures are 
below freezing or when the crop is stressed from cold weather just prior to winter dormancy can 
result in severe foliar burn and/or crop injury. 
00 not apply REPORT plus 2,4-0 or MCPA in combination with organophosphate insecticides. 
With metribuzin (such as "Lexone" DF) 
Use 1/6 to 1/3 oz per acre of REPORT with 1 to 102/3 oz of "Lexone" OF per acre. "Lexone" OF 
is recommended to control downy brome and cheatgrass in winter wheat in Kansas, Idaho, 
Oklahoma, Oregon, Texas, and Washington or to broaden the spectrum of weeds controlled. 
Use REPORT with low rates of "Lexone" OF (1 to 4 oz) when winter 
wheat is at the. 2-leaf to 3 tiller stage. 
Higher rates of "Lexone" OF (up to 1 0 2/3 oz) should be used in combination with REPORT 
. after the crop has at least 3 tillers and has a 2" secondary root system and is actively growing. 
9

... __ .. _._-_.-% 
REPORT plus "Lexone" OF is recommended for barley in Idaho, Oregon and Washington only. 
For additional information on "Lexone" OF use rates recommended for specific soils, grazing 
and timing statements, see the "Lexone" OF supplemental label for winter wheat, barley, and 
"fallow. 
With diuron (such as Diuron OF) 
In the Pacific Northwest where prickly lettuce, corn gromwell, annual ryegrass and annual 
bluegrass are the main weed problems, apply 4/10 to 1 2/10 Ib ai diuron with REPORT. 
Apply preemergence or postemergence to actively growing weeds less than 2" tall or 2" across. 
One-half to 1" rainfall is needed within 1 to 2 weeks after application. Follow all label guidelines 
and restrictions on the diuron labels. If those recommendations conflict with this label, do not 
tank mix the herbicide with REPORT. 
With Other Herbicides 
REPORT can be tank mixed with other herbicides to control weeds not listed on this label. Use 
1/6 to 1/3 oz per acre of REPORT with the following products at the rates shown. 
bromoxynil: such as 
"Buctril" 4EC 1/4 to 1 pt per acre 
"Bronate" 1/2 to 2 pt per acre 
"Banvel" 1 18 to 1 14 pt per acre 
"Banvel SGF" 1/4 to 1/2 pt per acre 
"Curtail" 1 to 2 pt per acre 
When tank mixing REPORT and "Assert", always include another broad leaf herbicide having a 
different mode of action (for example, MCPA ester, 2,4-0 ester, "Bronate," or "Buctril"). 
REPORT can-be tank mixed with "Olympus" herbicide for improved control of weeds in wheat. 
With Insecticides 
REPORT may be tank mixed with insecticides registered for use on cereal grains. However, 
under certain conditions (stress from drought, cold weather or warm days and cold nights 
following application, or crops in the 2-4 leaf stage), tank mixtures or sequential treatments of 
REPORT and organophosphate insecticides (such as methyl parathion, "Di-Syston", etc.) may 
produce temporary crop yellowing or, in severe cases, crop injury. Test these mixtures in a 
small area first. If no symptoms of crop injury occur 14 days after treatment, treat the rest of the 
acreage. 
Do not use REPORT plus malathion, as crop injury may result. Do not apply REPORT 
within 60 days of crop emergence where an organophosphate insecticide (such as "Oi­
Syston") has been applied as an in-furrow treatment, as crop injury may result. 
With FungiCides 
REPORT may be tank mixed with mancozeb (such as "Manzate" 75DF fungicide or "Manzate" 
Flowable) or other fungicides whenever the proper timing for herbicide and fungicide treatments 
coincide. 
With Liquid Fertilizer 
REPORT may be tank mixed with liquid fertilizer for application to crops. Note that adding 
surfactant to tank mixtures of REPORT and liquid fertilizer increases the risk of crop 
injury. Therefore, before mixing REPORT with fertilizer, check the compatibility of the tank mix 
10

on a small area before treating the entire crop. 
Do not use REPORT with liquid fertilizers having a pH of 3.0 or less, as rapid product 
degradation can result. 
Note: Liquid fertilizers are significantly heavier than water per gal of liquid; therefore, to 
maintain proper spray volumes, adjust the nozzle type and nozzle pressure as necessary. 
Consult 
fertilizer solution suppliers and/or sprayer systems company catalogs to determine the 
appropriate spray nozzles. 
SPECIFIC WEED PROBLEMS 
Annual Ryegrass (Southeast Oklahoma, Central and North Central Texas): Apply REPORT 
preemergence at 1/2 oz per acre. One-half to 1" of rainfall is needed to move REPORT 
into the root zone of weeds prior to ryegrass emergence. Under abnormally wet conditions, fall 
applications may not adequately control ryegrass and/or broad leaf weeds that germinate in the 
spring. 
For best results, a sequential treatment of REPORT followed by "Lexone" DF herbicide is 
recommended. 
Remove grazing cattle when fields are wet (muddy) to avoid disturbing the herbicide barrier. 
Canada Thistle: Apply REPORT with surfactant after the majority of thistles have emerged and 
while they are small (rosette stage to 4"-6" tall) and actively growing. For maximum 
long-term effect, y~arly treatment may be required. 
Flixweed, Tansymustard (Northern Idaho, Oregon and Washington): For best postemergence 
results, tank mix REPORT at 1/3 oz per acre with another herbicide that is effective on these 
weeds, such as 2,4-0. 
In all other areas, apply REPORT at 1/6 to 1/3 oz per acre when weeds are small and actively 
growing. If weeds are inactive due to cold, dry weather before andlor after treatment, delay 
application until moisture and temperature conditions are favorable for active weed growth, or 
use a tank-mix treatment with 2,4-D or MCPA. 
Lambsquarters: For best results, apply at least 1/3 oz per acre REPORT in the fall. 
For best postemergence suppression, apply REPORT plus either 2,4-0 or MCPA after the 
majority of weeds have emerged (less than 2" tall or 2" across) and are actively growing. Soil 
moisture should be adequate, and daily temperatures should reach at least 60°F. Add 
surfactant at 112 to 1 qt per 100 gal of spray solution. Ensure thorough spray coverage. See 
Tank Mixtures. 
Prostrate Knotweed: For best results, apply in the fall. 
Sunflower (New Mexico, Oklahoma (Panhandle), and Texas): 
For best results, apply REPORT after the majority of sunflowers have emerged, are actively 
growing, and are not more than 2" tall. Add surfactant at 2 qt per 100 gal of water. For 
preemergence applications, apply REPORT in early spring to allow rainfall to move REPORT 
into the weed root zone before weeds germinate or develop an established root system.-
Wild Buckwheat: For best results, apply REPORT preemergence to wild buckwheat. For 
postemergence applications, tank mix with 2,4-D, MCPA, "Banvel"/"Banvel SGF", "Buctril" or 
11

"Bronate" and surfactant and apply after the majority of seedlings have emerged and are 
actively growing. 
Wild GarliclWild Onion: REPORT provides aerial bulblet control only. 
Wild Radish: For best results, apply postemergence. 
APPLICATION TO TALL FESCUE GROWN FOR SEED 
REPORT may be used for control of wild carrot in Tall Fescue grown for seed in the states of 
Oregon and Washington. 
Apply REPORT at 0.25 ounce per acre in late summer to early fall (immediately'after harvest to 
late September). If wild carrot has emerged, add a non-ionic surfactant at 1 qt. per 100 
gallons of spray solution. The use of crop oil or seed oil adjuvants may increase crop injury. To 
maximize crop safety, add 0.5 to 1.0 lb. active ingredient of 2,4-0, and apply when Tall . 
Fescue has very little new foliar growth. 
Treatment with REPORT may reduce the height of TaU Fescue. In areas of spray overlap, crop 
height and yields may be reduced Significantly. 
Applications made in the spring while Tall Fescue is actively growing can result in very 
significant crop damage. 
Spring germinating Wild carrot may not be controlled by a fall application of REPORT. 
Do not mix REPORT with an organophosphate insecticide as severe crop injury may occur. 
There are no grazing, feeding, or hay-harvest restrictions for this use of REPORT on Tall 
Fescue. 
CROP ROTATION 
Before using REPORT, carefully consider your crop rotation plans and options. For 
rotational flexibility, do not treat all of your wheat, barley, oat, or fallow acres at the same time. 
MINIMUM RECROPPING INTERVALS 
Minimum recropping intervals* are determined by the rate of breakdown of REPORT applied. 
REPORT breakdown in the soil is affected by soil pH, soil temperature, and soil moisture. Low 
soil pH, high soil temperature, and high soil moisture increase REPORT breakdown in soil, 
while high soil pH, low soil temperature, and low soil moisture. slow REPORT breakdown. 
Of these three factors, only soil pH remains relatively constant. Soil temperature, and to a 
greater extent, soil moisture, can vary significantly from year to year and from area to area. For 
this reason, soil temperatures and soil moisture should be monitored regularly when conSidering 
recropping. 
* The minimum recropping interval represents the period of time from 'the last application to the 
anticipated date of the next planting. 
SOIL PH LIMITATIONS 
REPORT should not be used on soils having a pH above 7.9, as extended soil residual activity 
could extend crop rotation intervals beyond normal, and under certain conditions, could 
injure wheat, barley, or oat. In addition, other crops planted in high~pH soils can be extremely 
12

sensitive to low concentrations of REPORT. 
Checking Soil pH 
Before using REPORT, determine the soil pH of the areas of intended use. To obtain a 
representative pH value for the test area, take several 0 to 4" samples from different areas of 
the 
field and analyze them separately. Consult local extension publications for additional 
information on recommended soil sampling procedures. 
N oncerea IC rops -- R ecroppmg ntervals-- N I" tdL d on rrlga e an 
Location 
Cumulative Rotation 
Application Precipitation Interval 
State County or Area Crop Soil pH Rate (ozJA) (Inches) (Months) 
Kansas Central (E. of Hwy Grain 7.9 or 1/6 to 1/3 25 14 
183. W. of the SorQhum lower 
Flinthills) Soybeans 7.5 or 1/6 to 1/3 25 14 
lower 
7.6 to 1/6 to 1/3 46 26 7.9 
W.Central & Grain 7.5 or 1/6 to 1/3 21 14 
Western Sorghum lower 
(generally West of 7.6 to Hwy. 183 to the 7.9 1/6 to 1/3 42 26 
Western edge of 
Grant, Kearny, 
Logan Rawlings, 
Stevens Thomas 
and Wichita 
counties 
Far Western (In Grain 7.5 or 1/6 to 1/3 36 26 
the last tier of Sorghum lower 
counties along the 7.6 to KS/CO Border- 7.9 1/6 to 1/3 60 48 
(Cheyenne, 
Greeley, Hamilton, 
Morton, Sherman, 
Stanton, and 
Wallace) 
13

.. ··%5 .. --. 
Nebraska S. Central Grain 7.9 or 1/6 to 1/3 25 14 
(Franklin, Sorghum lower 
Nuckolls, Thayer 
and Western Soybeans 7.5 or 1/6 to 1/3 25 14 
counties) lower 
7.6 to 1/6 to 1/3 46 26 7.9 
Western (W. of Field 7.5 or 1/6 to 1/3 40 24 
Hwy 183 to WY Corn, lower 
border Millets, 7.6 to Grain 7.9 1/6 to 1/3 60 .36 
Sorghum, 
Soybeans 
.Oklahoma Central & Eastern Grain 7.9 or 1/6 to 1/2 25 14 
(E. of Hwy 183) Sorghum, lower 
Cotton, 
Mung, 
Beans, 
Soybeans 
Western(W. of Cotton, .7.9 or ·116 to 1/3 25 14 
Hwy 183 & E. of Grain lower 
the Panhandle Sorghum. 
Panhandle Grain 7.9 or 
Sorghum lower 1/6 to 1/3 30 25 
Idaho* Northern counties Pea (dry) 6.5 or 1/6 to 1/3 35 24 
(Benewah, lower 
Bonner, Boundary, Lentils 6.5 or 1/6 to 1/3 50 36 
Clearwater, Idaho, \ lower 
Koontenat, Letah, 
Lewis and Nez 
Perce) 
Northeastern Pea (dry) 6.5 or 1/6 to 1/3 35 24 
Oregon* counties (Baker, lower 
Umatilla, Union, Lentils 6.5 or 1/6 to 1/3 50 36 
Wallowa) less 
14

10/ . IdE -.-~ .. 
Washington* Eastern (Asotin, Pea (dry) 6.5 or 1/6 to 1/3 35 24 
Columbia, Garfield, lower 
Pend Oreille, Lentils 6.5 or 1/6 to 1/3 50 36 
Spokane, Stevens, lower 
Walla Walla, and 
Whitman) 
Texas Eastern counties Grain 7.9 or 1/6 to 1/2 25 14 
sorghum, lower 
Cotton, 
Mung 
Beans, 
Soybeans 
t The Eastern counties are: Archer, Bell, Bosque, Bowie, Camp, Cass, Clay, Colin, 
Cooke, Coryell, Dallas, Delta, Denton, Ellis, Falls, Fannin, Franklin, Grayson, Hill, 
Hood, Hopkins, Hunt, Jack, Johnson, Kaufman, Lamar, Limestone, McLennan, 
Milam,Montague, Morris, Navarro, Palo Pinto, Parker, Rains, Red River, Robertson, 
Rockwall, Somervell, Tarrent, Titus, Upshur,Van Zandt, Wichita, Williamson, Wise, 
Wood, and Young 
7.9 or 1/6 to 1/3 25 14 
Central counties+ Cotton, lower 
Grain sorghum 7.9 or 1//2 46 26 
lower 
+ The Central counties are: Baylor, Callahan, Eastland, Foard, Hardeman, Haskell; 
Knox, Shackelford, Stephens, Throckmorton, and WilbarQ.er 
Panhandle Grain 7.9 or 1/6 to 1/3 30 25 
sorghum lower 
*A field bioassay is required if soil pH is above 6.5. 
Note: Do not plant sorghum grown for hybrid seed production. 
Unless a crop rotation interval is specified, a field bioassay must be completed before rotating to 
any crop not listed. See Bioassay for information on conducting a field bioassay in target areas. 
Cereals---,Recropping Intervals 
NE. KS. OK. TX 
Soil QH* 
7.9 or lower 
7.9 or lower 
Use Rate 
(oz/acre) 
1/6 to 1/3 
1/2 
15 
Minimum Recropping 
Interval (Months) 
WheatlRye/Triticale Oat Barley 
0 10 10 
4 10 16

CAjNORTHERNIDjOR1UT1WA 
Minimum Recropping 
Use Rate Interval (Months) 
SoilI2H* {oz/acre} WheatlR~~lTriticale Oat . Barle~ 
. 6.5 or lower 1/6 to 1/3 0 10 
6.6 to 7.5 1/6 to 1/3 0 10 
7.6 to 7.9 1/6 to 1/3 4 16 
* See Maximum Use Rates and Soil pH Limitations section of this label. 
BIOASSAY 
A field bioassay must be completed before rotating to crops not listed on this label or when 
rotating at intervals shorter than those listed in the Crop Rotation section. 
Field Bioassay . 
10 
16 
24 
A field bioassay is necessary if crops other than wheat, barley, oat, or those listed on this label 
are to be planted on land previously treated with REPORT. To conduct a field bioassay, grow 
test strips of the crop or crops you plan to grow the following year in fields previously treated 
with REPORT. Crop response to the bioassay will indicate whether or not to rotate to the crop(s) 
grown in the test strips. 
If a field bioassay is planned, check with your local Agricultural dealer, or Cheminova 
representative, for a fact sheet detailing field bioassay procedure. 
GRAZING 
There are no grazing restrictions on REPORT. 
MIXING INSTRUCTIONS 
1. Fill the tank 1/4 to 1/3 full of water (If using liquid nitrogen fertilizer solution in place of water, 
see Tank'Mixtures sections for additional details) . 
. 2. While agitating, add the required amount of REPORT. 
3. Continue agitation until the REPORT is fullydispersed, at least 5 minutes. 
4. Once the REPORT is fully dispersed, maintain agitation and continue filling tank with water. 
REPORT should be thoroughly mixed with water before adding any other material. 
5. As the tank is filling, add tank mix partners (if desired) then add the necessary volume of 
non ionic surfactant. Always add surfactant last. 
6. If the mixture is not continuously agitated, settling will occur. If settling occurs, thoroughly re­
agitate before using. 
7. Apply REPORT spray mixture within 24 hours of mixing to avoid product degradation. 
8. If REPORT and a tank mix'partner are to be applied in multiple loads, pre-slurry the REPORT 
in clean water prior to adding to the tank. This will prevent the tank mix partner from interfering 
with the dissolution of the REPORT. 
Do not use REPORT with spray additives that reduce the pH of the spray solution to beiow 3.0. 
SPRAY EQUIPMENT 
For specific application equipment, refer to the manufacturer's recommendations for additional 
information on GPA, pressure, speed, nozzle types and arrangements, nozzle heights above 
the 
target canopy, etc. 
Be sure to calibrate air or ground equipment properly before application. Select a spray volume 
16

and delivery system that will ensure thorough coverage and a uniform spray pattern with 
minimum drift. Use higher spray volumes to obtain better coverage when crop canopy is dense. 
Avoid swath overlapping, and shut off spray booms while starting, turning, slowing, or 
stoppil')g, to avoid injury to the crop. 
Do not make applications using equipment and/or spray volumes or under weather conditions 
that might cause spray to drift onto nontarget sites. For additional information on spray 
drift, refer to the Spray Drift Management section of this label. . 
Continuous agitation is required to keep REPORT in suspension. 
SPRAYER CLEANUP 
Spray equipment must be cleaned before REPORT is sprayed. Follow the cleanup procedures 
specified on the labels of previously applied products. If no directions are 
provided, follow the six steps outlined in After Spraying REPORT below 
At the End of the pay 
When multiple loads of REPORT herbicide are applied, it is recommended that at the end of 
each day of spraying, the interior of the tank be rinsed with fresh water and then partially filled, 
and the boom and hoses flushed. This will prevent the buildup of dried pesticide deposits which 
can accumulate in the application equipment. 
After Spraying REPORT and Before Spraying Crops Other Than Wheat, Barley, or Oat 
To avoid subsequent injury to desirable crops, thoroughly clean all mixing and spray equipment 
immediately following applications of REPORT as follows: . 
1. Drain tank; thoroughly rinse spray tanks, boom, and hoses with clean water. Loosen and 
physically remove any visible deposits. 
2. Fill the tank with clean water and 1 gal of household ammonia* (contains 3% active) for every 
100 gal of water. Flush the hoses, boom, and nozzles with the cleaning solution. Then add more 
water to completely fill the tank. Circulate the cleaning solution through the tank and hoses for 
at least 15 min. Flush the hoses, boom, and nozzles again with the cleaning solution, and then 
drain the tank. . . 
3. Reniove the nozzles and screens and clean separately in a bucket containing cleaning agent 
and water. 
4. Repeat step 2. 
5. Rinse the tank, boom, and hoses with clean water. 
6. If only Ammonia is used as a cleaner, the rinsate solution may be applied back to the crop(s) 
recommended on this label. Do riot exceed the maximum labeled use rate. If other cleaners are 
used, consult the cleaner label for rinsate disposal instructions. If no instructions are given, 
dispose of the rinsate on site or at an approved waste disposal facility. 
* Equivalent amounts of an alternate-strength ammonia solution can be used in the cleanout 
procedure. Carefully read and follow the individual Cleaner instructions. Consult your 
Agricultural dealer or applicator for a listing of approved cleaners. 
Notes: 
1. Caution: Do not use chlorine bleach with ammonia as dangerous gases will form. Do not 
clean equipment in an enclosed area. 
2. Steam-cleaning aerial spray tanks is recommended prior to performing the above cleanout 
procedure to facilitate the removal of any caked deposits. 
3. When REPORT is tank mixed with other pesticides, all required cleanout procedures should 
be examined and the most rigorous procedure should be followed. 
4. In addition to this cleanout procedure, all precleanout guidelines on subsequently applied 
products should be followed as per the individual labels. 
1?

5. Where routine spraying practices include shared equipment frequently being switched 
between applications of REPORT and applications of other pesticides to REPORT-sensitive 
crops during the same spray season, it is recommended that a sprayer be 
dedicated to REPORT to further reduce the chance of crop injury. 
RESISTANCE 
When herbicides that affect the same biological site of action are used repeatedly over several 
years to control the same weed species in the same field, naturally-occurring resistant biotypes 
may survive a coirectly applied herbicide treatment, propagate, and become dominant in that 
field. Adequate control of these resistant weed biotypes cannot be expected. If weed control is 
unsatisfactory, it may be necessary to retreat the problem area using a product affecting a 
different site of action. 
To better manage herbicide resistance through delaying the proliferation and possible 
dominance of herbicide resistant weed biotypes, it may be necessary to change cultural 
practices within and between crop seasons such as using a combination of tillage, retreatment, 
tank-mix partners and/or sequential herbicide applications that have a different site of action. 
Weed escapes that are allowed to go to seed will promote the spread of resistant biotypes. 
It is advisable to keep accurate records of pesticides applied to individual fields to help obtain 
information on the spread and dispersal of resistant biotypes. Consult your agricultural dealer, 
consultant, applicator, and/or appropriate state agricultural extension service representative for 
specific alternative cultural practices or herbicide recommendations available in your area. 
Naturally occurring weed biotypes that are resistant to "Amber" herbicide, "Ally" herbicide, 
Accurate® herbicide, "Finesse" herbicide, "Express" herbicide or "Harmony" Extra herbicide will 
also be resistant to REPORT. 
INTEGRATED PEST MANAGEMENT 
This product may be used as part of an Integrated Pest Management (IPM) program that can 
include biological, cultural, and genetic practices aimed at preventing economic pest damage. 
IPM principles and practices include field scouting or other detection methods, correct target 
pest identification, population monitoring, and treating when target pest populations reach 
locally determined action thresholds. Consult your state cooperative extension service, 
professional consultants or other qualified authorities to determine appropriate action treatment 
threshold levels for treating specific pest/crop systems in your area. 
PRECAUTIONS - CEREALS 
Injury to or loss of desirable trees or vegetation may result from failure to observe the following: 
• Do not apply, drain or flush equipment on or near desirable trees or other plants, or on areas 
where their roots may extend, or in locations where the chemical may be washed or moved into 
contact with their roots. 
• Do not use on lawns, walks, driveways, tennis courts, or similar areas. 
Injury to or loss of adjacent sensitive crops and vegetation may result from failure to observe the 
following: 
• Take all necessary precautions to avoid all direct or indirect contact (such as spray drift) with 
non-target plants or areas. 
• Carefully observe sprayer cleanup instructions, both prior to and after using this product, as 
spray tank residue may damage crops other than wheat, barley, or oat. 
Do not harvest grain sooner than 45 days after the application of REPORT. 
18 
.:ts .

· .... ~. 
Wheat, barley, and oat varieties may differ in their response to various herbicides. Cheminova 
recommends that you first consult your state experiment station, university, or extension agent 
as to sensitivity to any herbicide. If no information is available, limit the initial use of REPORT to 
a small area. 
Do not apply REPORT to wheat, oat, or barley that is stressed by severe weather conditions, 
drought, low fertility, water-saturated soil, disease or insect damage, as crop injury may result. 
Severe winter stress, drought, disease, or insect damage following application may also result 
in crop injury. 
Do not apply REPORT during boot or early heading as crop injury may result. 
Do not apply to wheat, barley, or oat undersown with legumes and grasses, as injury to the 
forages will result. 
Do not apply to frozen ground where surface runoff may result. 
Do not apply to snow-covered ground. . 
Do not apply to irrigated land where tailwater will.be used to irrigate other cropland. 
The combined effects of the preemergence use of REPORT plus preemergence wild oat 
herbicides may cause crop injury to spring wheat when crop stress (soil crusting, planting too 
deep, prolonged cold, wet weather, or drought) causes poor seedling vigor. 
In the Pacific Northwest, to prevent crop injury due to cold weather, avoid making 
preemergence applications or early postemergence applications (2-4 leaf stage) to wheat or 
barley during late fall or winter when cold weather conditions are unpredictable and can be 
severe. The 
combined effects of herbicide stress plus cold weather stress can result in greater crop injury 
than either stress factor alone. 
Preemergence weed control or suppression may be unsatisfactory on soils containing 5% or 
more organic matter. 
Fall applications on coarse textured soils (especially those having a pH of greater than 7.0) may 
not provide adequate control or suppression of spring germinating weeds. 
To reduce the potential for movement of treated soil due to wind erosion, do not apply to 
powdery dry or light sandy soils until they have been stabilized by rainfall, trashy mulch, 
reduced tillage or other cultural practices. Injury to immediately adjacent crops may result when 
treated soil is blown onto land used to produce crops other than cereal grains. 
For ground applications applied postemergence to weeds when dry, dusty field conditions exist, 
control of weeds in wheel track areas may be reduced. The addition of 2,4-D or MCPA should 
improve weed control under these conditions. 
Preemergence applications of 2,4-0 or herbicides containing 2,4-0 made within two weeks of 
planting spring cereals may cause crop injury when used in conjunction with preemergence or 
early postemergence applications of REPORT. 
Tank mix applications of REPORT plus "Assert" may cause temporary discoloration/stunting or 
injury to the crop when heavy rainfall occurs shortly after the application. 
Wherever REPORT is used on land previously treated with "Finesse", "Ally", ACCURATE, 
"Amber", "Assert", or other longer residual herbicides with the same mode of action, read the 
rotational guidelines on both labels and follow the one with the longest interval stated for your 
situation before choosing to rotate to crops other than wheat or barley. 
In far-western Kansas (last tier of counties along the Colorado/Kansas border),Western 
Nebraska, Eastern New Mexico, and the Oklahoma and Texas panhandles, take the following 
precautions: 
• Do not use a tank mix containing "Ally" or ACCURATE herbicide within 22 months of REPORT 
application. 
19

• Do not use REPORT in continuous cereals or cereal/fallow/cereal rotations. 
• REPORT in a tank mix at 1/6 to 1/3 oz per acre may be used only as a fallow treatment in corn 
or sorghum stubble in wheat/sorghum/fallow, or wheat/corn/fallow rotations where other residual 
broadleaf herbicides having different modes of action are used. . 
In California, Northern Idaho, Oregon, and Washington, take the following precautions: 
• Do not make an early season treatment where a tank mix cannot be made. 
• Do not apply REPORT during fallow. 
SPRAY DRIFT MANAGEMENT . 
The interaction of many equipment and weather-related factors determines the potential for 
spray drift. The applicator is responsible for considering all these factors when making 
application decisions. 
AVOIDING SPRAY DRIFT IS THE RESPONSIBILITY OF THE APPLICATOR. 
Importance Of Droplet Size 
The most effective way to reduce drift potential is to apply large droplets (>150 - 200 microns). 
The best drift management strategy is to apply the largest droplets that provide sufficient 
coverage and control. The presence of sensitive species nearby, the environmental conditions, 
and pest pressure may affect how an applicator balances drift control and coverage. APPLYING 
LARGER DROPLETS REDUCES DRIFT POTENTIAL, BUT WILL NOT PREVENT DRIFT IF 
APPLICATIONS ARE MADE IMPROPERLY OR UNDER UNFAVORABLE ENVIRONMENTAL 
CONDITIONS! See Wind, Temperature and Humidity, and Surface Temperature Inversions 
sections of this label. 
Controlling Droplet Size - General Techniques 
• Volume - Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with 
higher rated flows produce larger droplets.. . 
• Pressure - Use the lower spray pressures recommended for the nozzle. Higher pressure 
reduces droplet size and does not improve canopy penetration. 
WHEN HIGHER FLOW RATES ARE NEEDED, USE A HIGHER-CAPACITY NOZZLE 
INSTEAD OF INCREASING PRESSURE. 
• Nozzle Type -Use a nozzle type that is designed for the intended application. With most 
nozzle types, narrower spray angles produce larger droplets. Consider using low-drift nozzles. 
Controlling Droplet Size - Aircraft 
• Number of Nozzles - Use the minimum number of nozzles with the highest flow rate that 
provide uniform coverage. 
• Nozzle Orientation - Orienting nozzles so that the spray is emitted backwards, parallel to the 
airstream will produce larger droplets than other orientations. 
• Nozzle Type - Solid stream nozzles (such as disc and core with swirl plate removed) oriented 
straight back produce larger droplets than other nozzle types. 
BOOM LENGTH AND HEIGHT 
• Boom Length (aircraft) - The boom length should not exceed 3/4 of the wing length, using 
shorter booms decreases drift potential. For helicopters use a boom length and position 
that prevents droplets from entering the rotor vortices. 
• Boom Height (aircraft) - Application more than 10ft above the canopy increases the potential 
. for spray drift .. 
• Boom Height (ground) Setting the boom at the lowest height which provides uniform 
coverage reduces the exposure of droplets to evaporation and wind. The boom should remain 
level with the crop and have. minimal bounce. 
20

WIND 
Drift potential increases at wind speeds of less than 3 mph (due to variable direction and 
inversion potential) or more than 10 mph. However, many factors, including droplet size and 
equipment type determine drift potential at any given wind speed. AVOID APPLICATIONS 
DURING GUSTY OR WINDLESS CONDITIONS. 
Note: Local terrain can influence wind patterns. Every applicator should be familiar with local 
wind patterns and how they effect spray drift. 
TEMPERATURE AND HUMIDITY 
When making applications in hot and dry conditions, set up equipment to produce larger 
droplets to reduce effects of evaporation. 
SURFACE TEMPERATURE INVERSIONS 
Drift potential is high during a surface temperature inversion. Surface inversions restrict vertical 
air mixing, which causes small suspended droplets to remain close to the ground and move 
laterally in a concentrated cloud. Surface inversions are characterized by increasing 
temperature with altitude and are common on nights with limited cloud cover and light to no 
wind. They begin to form as the sun sets and often continue into the morning. Their presence 
can be indicated by ground fog; however, if fog is not present, inversions can also be identified 
by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that 
layers and moves . 
laterally in C3 concentrated cloud (under low wind conditions) indicates a surface inversion, while 
smoke that moves upward and rapidly dissipates indicates good vertical air mixing. 
SHIELDED SPRAYERS 
Shielding the boom or individual nozzles can reduce the effects of wind. However, it is the 
responsibility of the applicator to verify that the shields are preventing drift and not interfering 
with uniform deposition of the product. 
AIR ASSISTED (AIR BLAST) 
FIELD CROP SPRAYERS 
Air assisted field crop sprayers carry droplets to the target via a downward directed air stream. 
Some may reduce the potential for drift, but if a sprayer is unsuitable for the application and/or 
set up improperly, high drift potential can result. It is the responsibility of the applicator to 
determine that a sprayer is suitable for the intended application, is configured properly, and 
that drift is not occurring. 
Note:Air assisted field sprayers can affect product performance by affecting spray coverage 
and canopy penetration. Consult the application equipment section of this label to determine if 
use of 
an air assisted sprayer is recommended. 
NOTICE TO BUYER: Purchase of this material does not confer any rights under patents of 
countries outside of the United States. 
WARRANTY DISCLAIMER 
Cheminova warrants that this product conforms to the chemical description on the label and is 
reasonably fit for the purposes stated on the label when used in strict accordance with the 
directions, subject to the inherent risks set forth below. TO THE EXTENT CONSISTENT WITH 
APPLICABLE LAW, CHEMINOVA MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY 
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER 
EXPRESS OR IMPLIED WARRANTY. 
21

INHERENT RISKS OF USE 
It is impossible to eliminate all risks associated with use of this product. Crop injury, lack of 
performance, or other unintended consequences may result because of such factors as use of 
the product contrary to label instructions (including conditions noted on the label, such as 
unfavorable temperatures, soil conditions, etc.), abnormal conditions (such as excessive rainfall, 
drought, tornadoes, hurricanes), presence of other materials, the manner of application, or other 
factors, all of which are beyond the control of Cheminova or the Seller. All such risks shall be 
assumed by Buyer and User. Buyer and User agree to hold Cheminova and the Seller 
harmless for any claims related to such factors. 
LIMITATION OF REMEDIES 
To the extent consistent with applicable law, the exclusive remedy for losses or damages 
resulting from this product (including claims based on contract, negligence, strict liability, or 
other legal theories), shall be limited to one of the following, at Cheminova's election: 
(1) Refund of purchase price paid by buyer or user for product bought, or 
(2) Replacement of amount of product used. 
In no case shall Cheminova ·be liable for consequential; incidental, or special damages or 
losses. 
The terms of the Warranty Disclaimer above and this Limitation of Remedies cannot be varied 
by any written or verbal statements or agreements. No employee or sales agent of Cheminova 
or the Seller is authorized to vary or exceed the terms of the Warranty Disclaimer or this 
Limitation of Remedies in any manner. 
For product information call: 1-800-548-6113 
Internet address: www.cheminova.us.com. 
All rights reserved. 
CHISUM and ACCURATE are trademarks or registered trademarks of Cheminova 
Glean, Lexone, Ally, Finesse, Express and Harmony are trademarks or registered trademarks of 
DuPont or its affilitates. 
Di-Syston is a trademark of Bayer Crop Protection 
Raindrop RA is a registered trademark of GP Companies, Inc. 
Buctril, Bronate, and Olympus are trademarks of Bayer Corp. 
Asser and Banvel are trademarks of BASF Corp 
Curtail is a registered trademark of Dow AgroSciences LLC 
Amber is a trademark of Syngenta Crop Protection Inc. 
Manzate is a trademark of DuPont and is exclusively licensed to Griffin LLC 
6-9-08 
22 
0/B19/9