Files
justin a97107de46
Image rebuild (skip scrape) / build (push) Failing after 1h37m12s
docker: production image + Gitea Actions for monthly refresh
Dockerfile: self-contained image with corpus + Chroma + BM25 baked
in. Drawbar's compose pulls + runs without volume mounts. Built from
sources.json (labels schema), PRODUCT_NAME=crop_chem by default,
HYBRID_SEARCH=true (always-on for production quality). RERANK_URL +
OLLAMA_URL get set at compose time.

.gitea/workflows/refresh.yml: monthly cron (1st @ 06:00 UTC) does
full scrape → reindex → image push. Scrapes Bayer (~30 min) +
EPA PPLS row-crop filtered (~7h). Skips reindex+push if no corpus
diff. Tags pushed: :latest, :<sha12>, :corpus-<YYYY.MM.DD>.

.gitea/workflows/image-only.yml: on-demand or auto on code-only
pushes to main (paths: docs_mcp/, rag/, scrape/, requirements.txt,
Dockerfile, sources.json). Reindexes from committed corpus, builds
image, pushes. ~10 min vs ~9h full refresh.

.gitignore: corpus/ now COMMITTED (4,159 labels, 265 MB of .md +
sidecars). Lets image-only.yml rebuild indexes without re-scraping.
chroma/ + bm25/ still gitignored (regenerable binary indexes).

.dockerignore: drops venv, eval results, PLAN/README/CLAUDE.md,
deploy/, .git/ — keeps the image lean. corpus + chroma + bm25
explicitly NOT in dockerignore (those go INTO the image).

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
2026-05-24 12:32:41 -04:00

24 KiB
Raw Permalink Blame History

DUPONT TELAR HERBICIDE


, - -.. - - - - -- > ~

    • ~ - - ~ . - - -- r "" , ... , ~~ . ~ ru,.-- '" " .. :>". ~¥ • (A) United Slate, Envitorvnental Protection Agency ~ Reglst.atlon OPP Identifier Nu,nber &EPA Offic. of Pe,1icIda Program' (H75f15C) WUhlngton, DC ~&O Amendment Application for Pesticide: X Other 224681 Section I
  1. CompanylProdUCI Number 2. EPA ProdUCI Maneger 3. Propooed CleuilicaOon 352-404 R. J. Tavlor [!]None o Re5tricled 4. CompanylProducl (Name) PM. DuPont Telat® Herbicide 25
  2. Name end Addre" of Appli<:anl (Irtelude ZIP Code) 6. Expedited Review. in accordance with FIFRA Section 3(c)(3) E.I. du Pont de Nemours and Co., Inc. (b)(I), my prod~ct is ,Imilar or Identical in composhion and labeling Barley Mill Plaza, Walker's Mill Bldg. 37 to: Wilmington, De 19880-0038 EPA Reg. No. Attn: J. W. Dennv. WM6-170 o Check If iii, q a newaddreu Product Name Secllon II ~ Finel prinlAld Iabela In respona. to Amendmenl • Explain below ~ ~ Agency Iell8r dated Resubmission in respon .. to Agoncy Iener dated ~ 'Me Too' Application. X Notilication· Exriain below. I-- ~ Other· explain below. Explanation; Use additional pagels) iI necessary. (For section I and Section II.) Submission of no@cation of Section 3 label changes pursuant to PR Notice 95·2 for Telar® Herbicide. Notification include; modified verbiage under 'Resistance' statement: clarnlcation of wording under 'Industrial Turf' (Weeds Controlled); 'Precaution' section has been r8formatt8d (se8 page five of current label for deletions, Inclurllng deletion of the restriction on use of Telar® in the Dakotas & Montana; and minor edhorlal changes. Attachments; • Five (5) copies of final label, Idenlnied as 0·159050295 , Copv of stamped aoceoted label, 0-159091494, dated 9/30/94 • Ref. letter from J. W. Dennv to S. D. Hobaood dated 7/25/95 Section III
  3. Mllerl.1 Tilil Producl Will Ba Plcuged In: Child· Resistant Packaging Unil Packaging Water Soluble Packaging 2. Type of Container B Yas· BYes Byes r Plastic No No No Glass If 'Yes: No. per If 'Y.s: No. per Paper Other (Specifyl • Crll~lc.t!on must be Unit Package wgt. contain... I Package wgl. container I
  4. Location 01 Net Contsnts Information 4. Size(s) of RetaU Container 5. location of Label Directions o Label Cl Container BOn Label On Labelino aocomcanvina creduct
  5. Manner In Which Labell. Affixed To Product § Lithograph D Other ( J Paper glued Slenciled Sl!Ctlon IV I Coniaci Poinl (Complele irems dirocOy below lor identification of individual 10 be contacted, if necessary, to process Ihis applicat,on.) Name TiUe Telephone o (Includ<> Araa Code) James W. Dennv Product Reaistration Manaaer 1(302) 992-tJP< g Certlflcallon 6 Da'e !\ppli-:alion , Recei...., I cerilfy thaI the statements I have made on this form and aJl.nachments thorelo 110 true, acrurate and complote I acknowledge thaI any knowingly false or misleading a!alomenl may be punishable by fine or imprisonment or (S,".."pod) ""th under applicable law.

SZIt/$>/ 3. Title Product Reaistration M;:!n;JOAr ~ 4 TrName .1/ 5. Date James W, Dennv .11 IIv 25. 1 QQ<; PA Form 1570-1 IR .... 12·80 Pr.vloul .dltlonl .r.oblolel .. While· EPA File Co 0 . inal py ( ng Yollow· A pltcant copy p

n° <dlIPDNb. d '1 ~ Telar® herbicide . . . .

  • ~ I' " . . . " ......... 5'L (jrowing Partnership 'Witli 9£ature" .....

TABLE OF CONTENTS DIRECTIONS FOR USE ..................... . GENERAL INFORMATION ................. .. Environmental Conditions and Biological Activity .. 2 Resistance ................................... 2 APPLICATION INFORMATION ............... 2 NONCROP. INDUSTRIAL SITES ............ 2 Application Timing ........................ , 2 Weeds Controlled ......................... , 2 Tank Mixtures ............................. 2 TURF. INDUSTRIAL (UNIMPROVED ONLY) . 3 Application T;ming ..•..................... , 3 Weeds Controlled .......................... 3 Growth Suppression and Secdhead Inhibition .... 3 Application Timing ....................... 3 Weeds Controlled ........................ 3 Important Precautions-IndustrIal Turf Only .. 3 SPRA Y EQUIPMENT ........................ , 3 Broadcast Application ........................ 3 Handgun Application ......................... 3 SPRA Y ADJUVANTS . . . . . . . . . . . . . . . . . . . . . . . .. 3 Nonionic Surfactants ............. , .......... 3 Drift Contrel Agents ........................ 4 MIXING INSTRUCTIONS .................... 4 SPRA YER CLEANUP ........................ 4 SPRA Y DRIFT MANAGEMENT ............... 4 Importance of Droplet Size .................... 4 Controlling Droplet Size - General Techniques ..... 4 Boom Hcight ............................... 4 Wind ...................................... 4 Temperature and Humidity ..................... 4 Temperature Inversions ....................... 4 IMPORTANT PRECAUTIONS ................. 5 STORAGE AND DISPOSAL ................... 5 NOTICE OF WARRANTy .................... 5 .3 ••

Tela~ herbicide Dispersible Granules Active Ingredient Chlorsulfuron 2-Chloro-N-[(4-mcthoxy' ·methyl -1.3.5-triazin-2-yi)-aminocarbonyll benzenesulfonamide Inert Ingredients TOTAL EPA Reg. No. 352-404 By Weight 75% 25% 100% U.S. Pat. 4.127.405 I KEEP OUT OF REACH OF CHILDREN CAUTION PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS AND DOMESTIC ANIMALS CAUTION! MAY iRRiTATE EYES. NOSE. THROAT AND SKIN. Avoid breathing dust 01' spray mist. Avoid conta~t with skin. eyes and clothing. In case of contact with eyes. immediately flush with plenty of water. Oet medical attention if irritation persists. Wash thoroughly after handling. Remove and wash conta­ minatcd clothing before reuse. For medical emergencies Involving this product, call toll free 1·800-441·3637. ENVIRONMENTAL HAZARDS Do not apply directly to watlr. or to areas where surface water is present. or to intenid.ll areas below the mean high water mark. Do not contaminate water by cleaning of equipment or disposal of wa.tes. DIRECTIONS FOR USE It is a violation of federal law to use this product in a manner inconsistent with its labeling. TELAR should be ,.sed only in accordance with recommen­ dations on this label or in separate published DuPont recom­ mendations available through local suppliers. Do not use on food or feed crops. GENERJ\L INFORMATION DuPont Telar" Herbicide is a dispersible grar.ule that is mixed in water and applied as a spray to control many annual. biennial. and perennial broad leaf weeds on nonerop. industrial sites such as airpons, military installations, fence rows, roadsides and associated rights-or-way, lumberyards. petroleum tank farms. pipeline and utility rights-of-way, pumping installations, railroads, storage areas, ~iant sites and other similar areas in~luding governmental a.~·j private lands. TELAR is noncorrosive. nonflammable, nonvolatile ,md docs not freeze. TELAR can be applied as a preemergence or i,o,;elllcl'gcncc treatment. For best results. apply TEL.AR before or during early stages of weed growth. The degree and duralin" of control may depend on the following: usc rate • weed spectrum and size at application environmental conditions at and following trratmc~t I

. .. ,. ,. Environmental Conditions and Biological Activity TELAR is absorbed by both the roots and foliage of plants. rapidly inhibiting the growth of susceptible weeds. Two to 3 weeks after application to weeds. leaf growth slows. and the growing points tum reddish-purple. Within 4 to 6 weeks of application. leaf veins and leaves become discolored. and the growing points subsequently die. Warm. moist conditions following treatment enhance the effec­ tiveness of TELAR since moisture canies TELAR into weed roots. preventing roots from developing. Cold. dry conditions delay the activity ofTELAR. Weeds hardened off by cold weather or drought stress are less susceptible to TELAR. Resistance When herbicides with the same mode of action are used repeat­ edly over several years to control the same weed species in the same field. naturally-occurring resistant weed biotypes may survive a correctly applied herbicide treatment. propagate. and become dominant in that field. These resistant weed biotypes may not be adequately controlled. Cultural practices such as tillage. preventing weed escapes from going to seed. and using herbicides with different modes of action within and between crop seasons can aid in delaying the proliferation and possible dominance of herbicide resistant weed biotypes. APPLICATION INFORMATION NONCROp, INDUSTRIAL SITES TELAR is recommended for control of many annual. biennial. and perennial broadleaf weeds in noncrop. industria! dTCas. Application Timing Apply TELAR as a preemcrgent or early postcmcrgent spmy when weeds are actively genninating or growing. Weeds Controlled TELAR effectively controls the following weeds when applied at the use ralCs shown. When applied at lower mlCs. TELAR provides shon tcnn control of weeds listed; when applied at higher rates. weed control is increased. 114 to 112 o. per acre Annual sowthistle Blue mustard Common chickweed Common speedwell Con;cal (atchfty Fiddleneck( tarwoed) Field pennyeress Flixweed' Hcmpnenle Henbit London rocket Maywecd Miners lettuce Pineapple-weed Prostrate pigweed Redroot pigweed Shepherd's-purse Smooth pigweed Treacle mustard Tumble m~,(ard (Jim Hill) Wild mustard 2 112 to I oz per acre Bouncingbet Bur beakchervil Buttercup Canada thistle ot Cor. rnon lambsquaners 112 to I oz per acre Groundsel Marestail Musk thistle Sweet clover" • Panial control only. Common sunflower Common speedwell' Dandelion' Goldenrod Tumble mustard Turkey mullein" Whitetop (hoary cress)t Wild parsnip t Prcbloom to bloom and roll roseUe are re,;ommended timings. I 10 3 oz per acre Annual rye grass (Lolium sPp)" Aster Bedstraw B lack mustard Bull thistle Burclover Canada thistle Common cinquefoil Common mallo", Common mullein Common ragweed' Common tansy Common teasel Common yarrow Com 'purry Cow cockle Curly dock • Partial control only. Dyer's woad F1ixwced Foxtail (Setaria spp)" Horsetail (Equiseturn spp) Pepperweed (perennial) Poisor Ilcmlock Prostrate knotweed" PunctureVlne Red clover Russian knapweedt Scotch thistle Scouringrush (Eguisetum spp) Tansymustard White clover Wild carrot Wild garlic/wild onion Yellow starlh;;t1e' t- Prebloom to bloom and fall rosette arC rccolTlIllcndcd timings. SpecifIC Weed Problems Kochia, Russian Thistle, and Prickly Lettuce: Tank mix TELAR with herbicides with different modes ClI' actinn and apply postemergence before weeds fonn mature seed. Tank Mixtures For improved. broad spectrum control. tank mix TELi\R ,.'ltl' DuPont Kannex· DF Herbicide or Dul'ont Kro"ar" I Of P.erbicidc for preemergence to early postmergencc treat­ ments. Tank mix TELAR with dieamba. 2.4-0. or g:Yf,hosatc for postemergenr applications, When tank mixing TELAR. usc the most restrictive label limitations for each prcluct used in the mix. Do nnttank m:x TELAR with DuPont's HYVAR' ;,:;" Herbicide.

INDUSTRIAL TURF (Unimproved Only) TELAR is recommended to control weeds on unimproved industrial turf. on roadsides. and on other noncrop sites. Application TIming Apply TELAR when desirable grasses are well established. as premature treatment may result in top kill and tand reduction. For best results. treat turf at green-up. \ !reeds Controlled ':efer to Weeds Controlled section under NONCROP for '''(I., rates to control various weeds.When applied at lower rates. " I TELAR provides short term control of weeds listed; when \ 0.' I applied at higher rates. weed control is increased. ~ t ~ TELAR may be used on the following grasses when applied !c,.. ! at the use rates shown below. i ! Note: The higher rates andlor the addition of surfactant may , 1 result in temporary hlorosis of desirable grasses. [ t J/41010z ____________________________ __ Bahiagrass BemlUdagrass Blue grama 1I20z Bentgrass Bluestems (big. little. plains. sand. ww spar) Bromegrasses (meadow. smooth) Buffalograss Galleta Green needle grass Green sprangetop Indiangrass Indian ricegrass Kleingrass Lovegrasses (sand. weeping) 1/4101l20z Fescue Bluegrass Wheatgrass Orchard grass Prairie sandreed Sand dropseed Sheep fescue Sideoats grama Switchgrass Wheatgrasses (crested. in ermediate pubesceOl slender. stream bank. tall. thick spike. western) Wildrye grasses (beardless. Russian) Smooth brome GROWTH SUPPRESSION AND SEEDHEAD INHIBITION TELAR as a tank mix with other herbicides may be used to suppress grass growth (chemical mowing) and inhibit scedhead fonnation. Application Timing Apply TELAR to turf at green-up and before seed heads emerge (boot stage). Ensure that desirable grasses arc well established at application. as pr"rnature treatment may result in top kill and stand reduction. 3 Weeds Controlled Refer to Weeds Controlled section under NONCROI' f(, .. • ates to control various weeds. When applied at lower rates. TELAR provides short term control of weeds listed; when applied at higher rates. weed control is increased. TELAR may be used on the following grasses when applied at the use ;'ates shown below. 1140: TELAR + 114 • 112 pI Embark 2S Fescue Bluegrass Jl2 0: TELAR + 112 • 1 pI "Embark" 2S (PNW Only) Fescue Annual bluegrass Perennial ryegrass Smooth brome Orcharoj;rass Reed canary grass IMPORTANT PRECAUTIONS (Industrial Turf Only) Do not use TELAR or TELAR in a tank mix with "Embark" on bahiagrass turf or turf that is under stress from drought. insects. disease, cold temperature. or poor fertility. as injury may result. Do not apply TELAR to turf less than 1 year old. • GrdSS seed may be planted in treated areas 6 months after treatment, cultivation is recommended. For broadcast applications. do not exceed 112 oz TELAR per acre within a 12-month period. For those weeds listed under the 1- to 3-oz recommendation in the Noncrop.lndustrial Sites section of this label. spot treatment (at that rate) is recommended. Do not make broadcast applications to turf at 1- to 3-oz as this may cause excessive turf injury. SPRAY EQUIPMENT Apply TELAR using ground equipment only. Equipment used to apply TELAR should not be used for application to crops following a TELAR application. as even low rates of TELAR can kill or severely injure most crops (except small grains). BROADCAST APPLICATION Use 10 to 40 GPA when applying TELAR as a broadcast appli­ cation. Be sure to calibrate sprayers before application. Select a spray volume and delivery system that will ensUlC thorough covemge and a uniform spray pattern. When spraying industrial turf. avoid overlapping and shut off spray booms while starting. turning. slOWIng. or stopping to avoid injury to dsired species. HANDGUN APPLICATION Use 100 to 300 GPA when applying TELAR as a broadcast application via handgun. Mix I oz TELAR per I I)lIglll "r water. Apply up to 300 gal of spray mix per acre. SPRAY ADJUVANTS , Nonionic Surfactants Always include a nonionic surfactant when maki.,g ,",,'uller­ genee applications of TELAR (except for usc on 'urt). Anply at a minimum rate (concentration) of25% vlv (I qt per jOn gal of spray solution) or at the manufacturer's recommended r.lIe ba",,' on spray arca. Use only EP/\·apprnved ,urfactant., contaming at L:,,: ::0';, active ingred.ent.

Drift Control Agents To minimize drift, a drift control agent may be added at the manufacturer's reconunended rute. MIXING INSTRUCTIONS I. Fill spmy tank 112 full of water. 2. With the agitator running. add the proper amount of TELAR. 3. If using a companion product. add the recommended amount. 4. For postemergence applications. add the proper amount of spmy adjuvants (i.e. surfactants. drift control agents. etc.). 5. Add the remaining water. 6. Agitate the spray tank thoroughly. Use the spray preparation ofTELAR within 24 hours to avoid product degradation. If the spray prepa. ... tion is left standing. agitate it thoroughly before using. SPRAYER CLEANUP Thoroughly clean all mixing and spray equipment immediately following applications ofTELAR as follows: I. Drain tank; rinse interior surfaces of tank; then flush tank. boom. and hoses with clean water for a minimum of 5 mi,dteS. 2. Fill the tank with clean water and add the cleaning solution·. Flush the boom. ho~,es. and nozzles with the cleaning solution. Allow them to sit for IS minutes with agitation running. and then drain the tank. 3. Repeat Step 2. 4. Repeat Step I. 5. Remove the nozzles and screens and clean sepamtely. To remove traces of cleaning solution. rinse the 'lf1k thoroughly with clean water and flush through the hoses and boom. • Use any of the following cleaning solutions: I. One gal ammonia (containing 3% active) per 100 gal of water. 2. Nutra-sol2 (carefully read and follow Nutra-sollabel directions). 3. Loveland Spray Tank Cleaner3 (carefully read and follow Loveland Spray Tank Cleaner label directions). 4. Tank-Aid4 (carefully read and follow TaJ.·Aid label direr- tions). To reduce the amount of water required in tht above procedure. see separate DuPont bulletin. "Reduced Volume Cleanout Procedure for Large Sprayers." Note: This sprayer cleanup procedure is only effective for TELAR and for general uses spec' fied under "Directions for Use"; do not use sprayer on food ClOpS. feed crops. fine turf. omamelitals. and other desirable plants. SPRAY DRIFT MANAGEMENT The intemction of many equipment and weather-related factors determines the potential for spray drift. The applicator is responsible for considering all these fact'Jrs when making application decisions. A VOIDING SPRAY DRIFT IS TI-lE RESPONSIBILITY OF THE APPLICATOR. IMPORTANCE OF DROPLET SIZE The most effective way to reduce drift potential is to apply large droplets (> 150 - 200 microns). The best drift manage­ ment strategy is to apply the largest droplets that provide suffi· 4 cient coverage and control. The proscnce of scnsitive species nearby. the environmental conditions. and pest pressure may affect how an applicator balances drift control and coverage. APPLYING LARGER DROPLETS REDUCES DRIFT POTENTIAL. BlTf WilL NOT PREVENT DRIFT IF APPLICA nONS ARE MADE IMPROPERLY OR UNDER UNFAVORABLE ENVIRONMENTAL CONDITIONS! Sec WInd. Temperature and Humidity. and Temperature Inveuions sections of this label. Controlling Droplet Size· General Techniques • Volume· Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with higher rated flows produce larger droplets. • Pressure· Use the lower spray pressures recommended for the nozzle. Higher pressure reduces droplet size and docs not improve canopy penetration. WHEN HIGHER FLOW RATES ARE NEEDED, USE A HIGHER-CAPACITY NOZZLE INSTEAD OF INCREASING PRESSURE. • Nozzle Type - Use a nozzle type that is designed for the intended application. With most nozzle types. narrower spray angles produce larger droplets. Consider using low­ drift nozzles. BOOM HEIGHT Setting the boom at the lowest labeled height (if specified) which provides uniform coverage reduces the exposure of droplets to evapomtion and wind. For ground equipment. the boom s~ Juld remain level with the croo:md have minimal bounce. WIND Drift potential increases at wind speeds of less tlUUl 3 mph (due to inversion potential) or more than 10 mph. However. many factors. including droplet size and equipment type determine drift potential at any given wind speed. A VOID GUSTY OR WINDLESS CONDITIONS. Note: Local terrain can influence wind patterns. Every appli­ cator should be familiar with local wind patterns 'Uld how they affect spray drift. TEMPERATURE ANu HUMIDITY When making applications in hot and dry conditions. set up equipment to produce larger droplets to reduce effects of evapo­ ration. TEMPERATURE INVERSIONS Thift potential is high during a temperature inversion. Temperature inversions restrict vertical air mixing. which causes small suspended droplets to remain close to the ground and move latemlly in a concentrated cloud. Temperature inversions are characterized by increasing tempemture with .lltitudc and arc common on nights with limited ~Ioud cover and light to no wind. They begin to form as the sun sets and often cVf1tidue into the morning. Their presence car. be indicated by ground fog; however. if fog is not present, inversions can also N: identitied by the movement of smoke from a ground souree or a, a,remft smoke generator. Smoke that layers and moves I"t~~all) in a concentrdtcd cloud (under low wind c<mditions) indical-'c an inversion. while smoke that moves upward and rapid I; dissi· pates indicates good vertical air mixing.

PRECAUTIONS Injury to or loss of desirable trees or other plants may result from the following: • If equipment is drained or flushed on or near desirable trees or other plants, on areas where their roots may extend, or in locations where the chemical may be washed or moved into contact with their roots. • Treatment of powdery. dry soil and light, sandy soils when there is little likelihood of rainfall SOOt, after treatment may result in off target movement and possible damage to susceptible "rops when soil particles are moved by wind or water. Injury to crops may result if treated soil is washed. blown or moved onto land used to produce crops. Exposure to TELAR may injure or kill most crops (except small grains). Injury may be more severe when crops are irrigated. • Applications made during periods of intense rainfall. to soils . "j . ~ \ ,saturated with water, surfaces paved with materials such as ( r, ". ') 1 asphalt or concrete. or soils through which rainfall will not . \ \ '0 /' readily penetrtate may result in runoff and movement of \ ~ x...' TELAR. Do not treat frozen soil. Treated soil should be left l. undisturbed to reduce the potential for TELAR movement ~ \ by soil erosion due to wind or water. ~~ Do not use on lawns. walks. driveways. tennis courts, or similar areas. Do not apply in or on irrigation ditches or canals including their outer banks. Do not apply through any type of irrigation sys ""n. Do not use this product in the following counties of Colorado: Saguache. Rio Grande, Alanlosa. Costilla. and Conejos. STORAGE AND DISPOSAL Storage: Store product in original container only. Do not contaminate water. other pesticides. fenilizer. food or feed in storage. Product Disposal: Do not contaminate water. food or feed by storage or disposal. Wastes resuiting from the usc of this product may be disposed of on site or at an approved waste disposal facility or on non·crop sites as previously recommended. Container Disposal: Triple rinse (or equivalent) the container. Then offer for recycling or reconditioning. or puncture and dispose of in a sanitary landfill. or incineration. or. if allowed by state and local authori­ ties, by burning. If burned. stay out of smoke. NOTICE TO BUYER: Purchase of this material does not confer any rights under patents of countries outside of the United States. 8 NOTICE OF WARRANTY DuPont warrants that this product conforms to the chemical description on the label thereof and is reasonably fit f:>r purposes stated on such label only when used in accordance with directions under normal use conditions. It is impossible to eliminate all risks inherently associated with the use of this product. Injury to adjacent crops, inef­ fectiveness or other unintended consequences may result because of such factors as weather conditions. presence of other materials, or the manner of use or application, all of which are beyond the control of DuPont In no case shall DuPont be liable for consequential. special or i,ldirect damages resulting from the use or handling of this product. All such risks shall be assumed by the buyer. DUPONT MAKES NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR IMPLIED WARRANTY EXCEPT AS STATED ABOVE. A product of Combelt Chemical Company. 2 A product of Thomas G. Kilfoil Company. Inc. San Bruno. Ca. 3 A registered trademark of Loveland Industries. Inc. 4 A product of Combeh Chemical Company. 0-159 050295 © 1995 E. I. du Pont de Nemours and Company, Agricllltllrall'rodllcts, Wilmington, Delawac~ 1!'S98 5