Files
justin a97107de46
Image rebuild (skip scrape) / build (push) Failing after 1h37m12s
docker: production image + Gitea Actions for monthly refresh
Dockerfile: self-contained image with corpus + Chroma + BM25 baked
in. Drawbar's compose pulls + runs without volume mounts. Built from
sources.json (labels schema), PRODUCT_NAME=crop_chem by default,
HYBRID_SEARCH=true (always-on for production quality). RERANK_URL +
OLLAMA_URL get set at compose time.

.gitea/workflows/refresh.yml: monthly cron (1st @ 06:00 UTC) does
full scrape → reindex → image push. Scrapes Bayer (~30 min) +
EPA PPLS row-crop filtered (~7h). Skips reindex+push if no corpus
diff. Tags pushed: :latest, :<sha12>, :corpus-<YYYY.MM.DD>.

.gitea/workflows/image-only.yml: on-demand or auto on code-only
pushes to main (paths: docs_mcp/, rag/, scrape/, requirements.txt,
Dockerfile, sources.json). Reindexes from committed corpus, builds
image, pushes. ~10 min vs ~9h full refresh.

.gitignore: corpus/ now COMMITTED (4,159 labels, 265 MB of .md +
sidecars). Lets image-only.yml rebuild indexes without re-scraping.
chroma/ + bm25/ still gitignored (regenerable binary indexes).

.dockerignore: drops venv, eval results, PLAN/README/CLAUDE.md,
deploy/, .git/ — keeps the image lean. corpus + chroma + bm25
explicitly NOT in dockerignore (those go INTO the image).

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
2026-05-24 12:32:41 -04:00

640 lines
24 KiB
Markdown
Raw Permalink Blame History

This file contains invisible Unicode characters
This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# DUPONT TELAR HERBICIDE
- EPA Reg No: **352-404**
- Registrant: CORTEVA AGRISCIENCE, LLC
- Signal word: Caution
- Active ingredients: Chlorsulfuron (75%)
- Label accepted: 1995-07-27
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000352-00404-19950727.pdf
---
, - -.. - - - - -- >
~
- - ~ - ~-
~
. - - -- r ""
,~ ... , ~~ . ~ ru,.-- '" " .. :>". ~¥ •
(A) United Slate, Envitorvnental Protection Agency
~ Reglst.atlon
OPP Identifier Nu,nber
&EPA
Offic. of Pe,1icIda Program' (H75f15C)
WUhlngton, DC ~&O Amendment
Application for Pesticide: X Other 224681
Section I
1. CompanylProdUCI Number 2. EPA ProdUCI Maneger 3. Propooed CleuilicaOon
352-404 R. J. Tavlor
[!]None o Re5tricled 4. CompanylProducl (Name) PM.
DuPont Telat® Herbicide 25
5. Name end Addre" of Appli<:anl (Irtelude ZIP Code) 6. Expedited Review. in accordance with FIFRA Section 3(c)(3)
E.I. du Pont de Nemours and Co., Inc. (b)(I), my prod~ct is ,Imilar or Identical in composhion and labeling
Barley Mill Plaza, Walker's Mill Bldg. 37 to:
Wilmington, De 19880-0038
EPA Reg. No. Attn: J. W. Dennv. WM6-170
o Check If iii, q a newaddreu Product Name
Secllon II
~ Finel prinlAld Iabela In respona. to Amendmenl • Explain below
~ ~
Agency Iell8r dated
Resubmission in respon .. to Agoncy Iener dated
~ 'Me Too' Application.
X Notilication· Exriain below. I--
~ Other· explain below.
Explanation; Use additional pagels) iI necessary. (For section I and Section II.)
Submission of no@cation of Section 3 label changes pursuant to PR Notice 95·2 for Telar® Herbicide. Notification include; modified
verbiage under 'Resistance' statement: clarnlcation of wording under 'Industrial Turf' (Weeds Controlled); 'Precaution' section has
been r8formatt8d (se8 page five of current label for deletions, Inclurllng deletion of the restriction on use of Telar® in the Dakotas &
Montana; and minor edhorlal changes.
Attachments; • Five (5) copies of final label, Idenlnied as 0·159050295
, Copv of stamped aoceoted label, 0-159091494, dated 9/30/94 • Ref. letter from J. W. Dennv to S. D. Hobaood dated 7/25/95
Section III
1. Mllerl.1 Tilil Producl Will Ba Plcuged In:
Child· Resistant Packaging Unil Packaging Water Soluble Packaging 2. Type of Container
B Yas· BYes Byes
~r
Plastic
No No No Glass
If 'Yes: No. per If 'Y.s: No. per Paper
Other (Specifyl
• C~rll~lc.t!on must be Unit Package wgt. contain... I Package wgl. container
I
3. Location 01 Net Contsnts Information 4. Size(s) of RetaU Container 5. location of Label Directions
o Label Cl Container
BOn Label
On Labelino aocomcanvina creduct
6. Manner In Which Labell. Affixed To Product § Lithograph D Other ( J Paper glued
Slenciled
Sl!Ctlon IV
I Coniaci Poinl (Complele irems dirocOy below lor identification of individual 10 be contacted, if necessary, to process Ihis applicat,on.)
Name TiUe Telephone ~o (Includ<> Araa Code)
James W. Dennv Product Reaistration Manaaer 1(302) 992-tJP< g
Certlflcallon 6 Da'e !\ppli-:alion ,
Recei....,~ I cerilfy thaI the statements I have made on this form and aJl.nachments thorelo 110 true, acrurate and complote
I acknowledge thaI any knowingly false or misleading a!alomenl may be punishable by fine or imprisonment or (S,".."pod)
""th under applicable law.
2.
SZ~It/$~>/
3. Title
Product Reaistration M;:!n;JOAr ~
4 TrName .1/ 5. Date
James W, Dennv .11 IIv 25. 1 QQ<;
PA Form 1570-1 IR .... 12·80 Pr.vloul .dltlonl .r.oblolel .. While· EPA File Co 0 . inal py ( ng Yollow· A pltcant copy p
<dlIPDNb.
d '1 ~
Telar®
herbicide
. . . .
- ~ I' "
.
. .
" ......... 5'L (jrowing Partnership 'Witli 9£ature"
.....
TABLE OF CONTENTS
DIRECTIONS FOR USE ..................... .
GENERAL INFORMATION ................. ..
Environmental Conditions and Biological Activity .. 2
Resistance ................................... 2
APPLICATION INFORMATION ............... 2
NONCROP. INDUSTRIAL SITES ............ 2
Application Timing ........................ , 2
Weeds Controlled ......................... , 2
Tank Mixtures ............................. 2
TURF. INDUSTRIAL (UNIMPROVED ONLY) . 3
Application T;ming ..•..................... , 3
Weeds Controlled .......................... 3
Growth Suppression and Secdhead Inhibition .... 3
Application Timing ....................... 3
Weeds Controlled ........................ 3
Important Precautions-IndustrIal Turf Only .. 3
SPRA Y EQUIPMENT ........................ , 3
Broadcast Application ........................ 3
Handgun Application ......................... 3
SPRA Y ADJUVANTS . . . . . . . . . . . . . . . . . . . . . . . .. 3
Nonionic Surfactants ............. , .......... 3
Drift Contrel Agents ........................ 4
MIXING INSTRUCTIONS .................... 4
SPRA YER CLEANUP ........................ 4
SPRA Y DRIFT MANAGEMENT ............... 4
Importance of Droplet Size .................... 4
Controlling Droplet Size - General Techniques ..... 4
Boom Hcight ............................... 4
Wind ...................................... 4
Temperature and Humidity ..................... 4
Temperature Inversions ....................... 4
IMPORTANT PRECAUTIONS ................. 5
STORAGE AND DISPOSAL ................... 5
NOTICE OF WARRANTy .................... 5
.3
••
<DUPlNr>
Tela~
herbicide
Dispersible Granules
Active Ingredient
Chlorsulfuron
2-Chloro-N-[(4-mcthoxy' ·methyl
-1.3.5-triazin-2-yi)-aminocarbonyll
benzenesulfonamide
Inert Ingredients
TOTAL
EPA Reg. No. 352-404
By Weight
75%
25%
100%
U.S. Pat. 4.127.405
I
KEEP OUT OF REACH OF CHILDREN
CAUTION
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS
AND DOMESTIC ANIMALS
CAUTION! MAY iRRiTATE EYES. NOSE. THROAT
AND SKIN.
Avoid breathing dust 01' spray mist. Avoid conta~t with
skin. eyes and clothing.
In case of contact with eyes. immediately flush with plenty
of water. Oet medical attention if irritation persists.
Wash thoroughly after handling. Remove and wash conta­
minatcd clothing before reuse.
For medical emergencies Involving this product,
call toll free 1·800-441·3637.
ENVIRONMENTAL HAZARDS
Do not apply directly to watlr. or to areas where surface
water is present. or to intenid.ll areas below the mean high
water mark. Do not contaminate water by cleaning of
equipment or disposal of wa.tes.
DIRECTIONS FOR USE
It is a violation of federal law to use this product in a
manner inconsistent with its labeling.
TELAR should be ,.sed only in accordance with recommen­
dations on this label or in separate published DuPont recom­
mendations available through local suppliers.
Do not use on food or feed crops.
GENERJ\L INFORMATION
DuPont Telar" Herbicide is a dispersible grar.ule that is
mixed in water and applied as a spray to control many
annual. biennial. and perennial broad leaf weeds on nonerop.
industrial sites such as airpons, military installations, fence
rows, roadsides and associated rights-or-way, lumberyards.
petroleum tank farms. pipeline and utility rights-of-way,
pumping installations, railroads, storage areas, ~iant sites
and other similar areas in~luding governmental a.~·j private
lands.
TELAR is noncorrosive. nonflammable, nonvolatile ,md
docs not freeze.
TELAR can be applied as a preemergence or i,o,;elllcl'gcncc
treatment. For best results. apply TEL.AR before or during
early stages of weed growth. The degree and duralin" of
control may depend on the following:
usc rate
• weed spectrum and size at application
environmental conditions at and following trratmc~t
I
. .. ,. ,.
Environmental Conditions
and Biological Activity
TELAR is absorbed by both the roots and foliage of plants.
rapidly inhibiting the growth of susceptible weeds. Two to 3
weeks after application to weeds. leaf growth slows. and the
growing points tum reddish-purple. Within 4 to 6 weeks of
application. leaf veins and leaves become discolored. and the
growing points subsequently die.
Warm. moist conditions following treatment enhance the effec­
tiveness of TELAR since moisture canies TELAR into weed
roots. preventing roots from developing. Cold. dry conditions
delay the activity ofTELAR. Weeds hardened off by cold
weather or drought stress are less susceptible to TELAR.
Resistance
When herbicides with the same mode of action are used repeat­
edly over several years to control the same weed species in the
same field. naturally-occurring resistant weed biotypes may
survive a correctly applied herbicide treatment. propagate. and
become dominant in that field. These resistant weed biotypes
may not be adequately controlled. Cultural practices such as
tillage. preventing weed escapes from going to seed. and using
herbicides with different modes of action within and between
crop seasons can aid in delaying the proliferation and possible
dominance of herbicide resistant weed biotypes.
APPLICATION INFORMATION
NONCROp, INDUSTRIAL SITES
TELAR is recommended for control of many annual. biennial.
and perennial broadleaf weeds in noncrop. industria! dTCas.
Application Timing
Apply TELAR as a preemcrgent or early postcmcrgent spmy
when weeds are actively genninating or growing.
Weeds Controlled
TELAR effectively controls the following weeds when applied
at the use ralCs shown. When applied at lower mlCs. TELAR
provides shon tcnn control of weeds listed; when applied at
higher rates. weed control is increased.
114 to 112 o. per acre
Annual sowthistle
Blue mustard
Common chickweed
Common speedwell
Con;cal (atchfty
Fiddleneck( tarwoed)
Field pennyeress
Flixweed'
Hcmpnenle
Henbit
London rocket
Maywecd
Miners lettuce
Pineapple-weed
Prostrate pigweed
Redroot pigweed
Shepherd's-purse
Smooth pigweed
Treacle mustard
Tumble m~,(ard (Jim Hill)
Wild mustard
2
112 to I oz per acre
Bouncingbet
Bur beakchervil
Buttercup
Canada thistle ot
Cor. rnon lambsquaners
112 to I oz per acre
Groundsel
Marestail
Musk thistle
Sweet clover"
• Panial control only.
Common sunflower
Common speedwell'
Dandelion'
Goldenrod
Tumble mustard
Turkey mullein"
Whitetop (hoary cress)t
Wild parsnip
t Prcbloom to bloom and roll roseUe are re,;ommended timings.
I 10 3 oz per acre
Annual rye grass (Lolium
sPp)"
Aster
Bedstraw
B lack mustard
Bull thistle
Burclover
Canada thistle
Common cinquefoil
Common mallo",
Common mullein
Common ragweed'
Common tansy
Common teasel
Common yarrow
Com 'purry
Cow cockle
Curly dock
• Partial control only.
Dyer's woad
F1ixwced
Foxtail (Setaria spp)"
Horsetail (Equiseturn spp)
Pepperweed (perennial)
Poisor Ilcmlock
Prostrate knotweed"
PunctureVlne
Red clover
Russian knapweedt
Scotch thistle
Scouringrush (Eguisetum
spp)
Tansymustard
White clover
Wild carrot
Wild garlic/wild onion
Yellow starlh;;t1e'
t- Prebloom to bloom and fall rosette arC rccolTlIllcndcd timings.
SpecifIC Weed Problems
Kochia, Russian Thistle, and Prickly Lettuce: Tank mix
TELAR with herbicides with different modes ClI' actinn and
apply postemergence before weeds fonn mature seed.
Tank Mixtures
For improved. broad spectrum control. tank mix TELi\R ,.'ltl'
DuPont Kannex· DF Herbicide or Dul'ont Kro"ar" I Of
P.erbicidc for preemergence to early post~mergencc treat­
ments. Tank mix TELAR with dieamba. 2.4-0. or g:Yf,hosatc
for postemergenr applications, When tank mixing TELAR.
usc the most restrictive label limitations for each prc~luct used
in the mix.
Do nnttank m:x TELAR with DuPont's HYVAR' ;,:;"
Herbicide.
INDUSTRIAL TURF (Unimproved Only)
TELAR is recommended to control weeds on unimproved
industrial turf. on roadsides. and on other noncrop sites.
Application TIming
Apply TELAR when desirable grasses are well established.
as premature treatment may result in top kill and ~tand
reduction. For best results. treat turf at green-up.
\ !reeds Controlled
~\':efer to Weeds Controlled section under NONCROP for
~'''(I., rates to control various weeds.When applied at lower rates.
" I TELAR provides short term control of weeds listed; when
\ 0.' I applied at higher rates. weed control is increased.
~ t ~ TELAR may be used on the following grasses when applied !c,.. ! at the use rates shown below. i ! Note: The higher rates andlor the addition of surfactant may , 1 result in temporary ~hlorosis of desirable grasses.
[ t ~J/~4~1~0~1~0~z ____________________________ __
Bahiagrass
BemlUdagrass
Blue grama
1I20z
Bentgrass
Bluestems
(big. little. plains. sand.
ww spar)
Bromegrasses
(meadow. smooth)
Buffalograss
Galleta
Green needle grass
Green sprangetop
Indiangrass
Indian ricegrass
Kleingrass
Lovegrasses
(sand. weeping)
1/4101l20z
Fescue
Bluegrass
Wheatgrass
Orchard grass
Prairie sandreed
Sand dropseed
Sheep fescue
Sideoats grama
Switchgrass
Wheatgrasses
(crested. in ermediate
pubesceOl slender.
stream bank. tall. thick
spike. western)
Wildrye grasses
(beardless. Russian)
Smooth brome
GROWTH SUPPRESSION
AND SEEDHEAD INHIBITION
TELAR as a tank mix with other herbicides may be used to
suppress grass growth (chemical mowing) and inhibit
scedhead fonnation.
Application Timing
Apply TELAR to turf at green-up and before seed heads
emerge (boot stage). Ensure that desirable grasses arc well
established at application. as pr"rnature treatment may result
in top kill and stand reduction.
3
Weeds Controlled
Refer to Weeds Controlled section under NONCROI' f(, ..
• ates to control various weeds. When applied at lower rates.
TELAR provides short term control of weeds listed; when
applied at higher rates. weed control is increased.
TELAR may be used on the following grasses when applied
at the use ;'ates shown below.
1140: TELAR + 114 • 112 pI Embark 2S
Fescue Bluegrass
Jl2 0: TELAR + 112 • 1 pI "Embark" 2S (PNW Only)
Fescue
Annual bluegrass
Perennial ryegrass
Smooth brome
Orcharoj;rass
Reed canary grass
IMPORTANT PRECAUTIONS (Industrial Turf Only)
Do not use TELAR or TELAR in a tank mix with "Embark"
on bahiagrass turf or turf that is under stress from drought.
insects. disease, cold temperature. or poor fertility. as injury
may result.
Do not apply TELAR to turf less than 1 year old.
• GrdSS seed may be planted in treated areas 6 months after
treatment, cultivation is recommended.
For broadcast applications. do not exceed 112 oz TELAR per
acre within a 12-month period. For those weeds listed under
the 1- to 3-oz recommendation in the Noncrop.lndustrial
Sites section of this label. spot treatment (at that rate) is
recommended. Do not make broadcast applications to turf at
1- to 3-oz as this may cause excessive turf injury.
SPRAY EQUIPMENT
Apply TELAR using ground equipment only. Equipment used
to apply TELAR should not be used for application to crops
following a TELAR application. as even low rates of TELAR
can kill or severely injure most crops (except small grains).
BROADCAST APPLICATION
Use 10 to 40 GPA when applying TELAR as a broadcast appli­
cation. Be sure to calibrate sprayers before application. Select a
spray volume and delivery system that will ensUlC thorough
covemge and a uniform spray pattern. When spraying industrial
turf. avoid overlapping and shut off spray booms while starting.
turning. slOWIng. or stopping to avoid injury to d~sired species.
HANDGUN APPLICATION
Use 100 to 300 GPA when applying TELAR as a broadcast
application via handgun. Mix I oz TELAR per I I)lIglll "r
water. Apply up to 300 gal of spray mix per acre.
SPRAY ADJUVANTS
,
Nonionic Surfactants
Always include a nonionic surfactant when maki.,g ,",,'uller­
genee applications of TELAR (except for usc on 'urt). Anply at
a minimum rate (concentration) of25% vlv (I qt per jOn gal of
spray solution) or at the manufacturer's recommended r.lIe ba",,'
on spray arca.
Use only EP/\·apprnved ,urfactant., contaming at L:,,: ::0';,
active ingred.ent.
Drift Control Agents
To minimize drift, a drift control agent may be added at the
manufacturer's reconunended rute.
MIXING INSTRUCTIONS
I. Fill spmy tank 112 full of water.
2. With the agitator running. add the proper amount of TELAR.
3. If using a companion product. add the recommended amount.
4. For postemergence applications. add the proper amount of
spmy adjuvants (i.e. surfactants. drift control agents. etc.).
5. Add the remaining water.
6. Agitate the spray tank thoroughly.
Use the spray preparation ofTELAR within 24 hours to avoid
product degradation. If the spray prepa. ... tion is left standing.
agitate it thoroughly before using.
SPRAYER CLEANUP
Thoroughly clean all mixing and spray equipment immediately
following applications ofTELAR as follows:
I. Drain tank; rinse interior surfaces of tank; then flush tank.
boom. and hoses with clean water for a minimum of 5
mi,dteS.
2. Fill the tank with clean water and add the cleaning solution·.
Flush the boom. ho~,es. and nozzles with the cleaning solution.
Allow them to sit for IS minutes with agitation running. and
then drain the tank.
3. Repeat Step 2.
4. Repeat Step I.
5. Remove the nozzles and screens and clean sepamtely. To
remove traces of cleaning solution. rinse the ~'lf1k thoroughly
with clean water and flush through the hoses and boom.
• Use any of the following cleaning solutions:
I. One gal ammonia (containing 3% active) per 100 gal of
water.
2. Nutra-sol2 (carefully read and follow Nutra-sollabel
directions).
3. Loveland Spray Tank Cleaner3 (carefully read and follow
Loveland Spray Tank Cleaner label directions).
4. Tank-Aid4 (carefully read and follow TaJ.~·Aid label direr-
tions).
To reduce the amount of water required in tht above
procedure. see separate DuPont bulletin. "Reduced Volume
Cleanout Procedure for Large Sprayers."
Note: This sprayer cleanup procedure is only effective for
TELAR and for general uses spec' fied under "Directions for
Use"; do not use sprayer on food ClOpS. feed crops. fine turf.
omamelitals. and other desirable plants.
SPRAY DRIFT MANAGEMENT
The intemction of many equipment and weather-related
factors determines the potential for spray drift. The applicator
is responsible for considering all these fact'Jrs when making
application decisions.
A VOIDING SPRAY DRIFT IS TI-lE RESPONSIBILITY OF
THE APPLICATOR.
IMPORTANCE OF DROPLET SIZE
The most effective way to reduce drift potential is to apply
large droplets (> 150 - 200 microns). The best drift manage­
ment strategy is to apply the largest droplets that provide suffi·
4
cient coverage and control. The proscnce of scnsitive species
nearby. the environmental conditions. and pest pressure may
affect how an applicator balances drift control and coverage.
APPLYING LARGER DROPLETS REDUCES DRIFT
POTENTIAL. BlTf WilL NOT PREVENT DRIFT IF
APPLICA nONS ARE MADE IMPROPERLY OR UNDER
UNFAVORABLE ENVIRONMENTAL CONDITIONS! Sec
WInd. Temperature and Humidity. and Temperature
Inveuions sections of this label.
Controlling Droplet Size· General Techniques
• Volume· Use high flow rate nozzles to apply the highest
practical spray volume. Nozzles with higher rated flows
produce larger droplets.
• Pressure· Use the lower spray pressures recommended for
the nozzle. Higher pressure reduces droplet size and docs
not improve canopy penetration. WHEN HIGHER FLOW
RATES ARE NEEDED, USE A HIGHER-CAPACITY
NOZZLE INSTEAD OF INCREASING PRESSURE.
• Nozzle Type - Use a nozzle type that is designed for the
intended application. With most nozzle types. narrower
spray angles produce larger droplets. Consider using low­
drift nozzles.
BOOM HEIGHT
Setting the boom at the lowest labeled height (if specified)
which provides uniform coverage reduces the exposure of
droplets to evapomtion and wind. For ground equipment. the
boom s~ Juld remain level with the croo:md have minimal
bounce.
WIND
Drift potential increases at wind speeds of less tlUUl 3 mph (due
to inversion potential) or more than 10 mph. However. many
factors. including droplet size and equipment type determine
drift potential at any given wind speed. A VOID GUSTY OR
WINDLESS CONDITIONS.
Note: Local terrain can influence wind patterns. Every appli­
cator should be familiar with local wind patterns 'Uld how they
affect spray drift.
TEMPERATURE ANu HUMIDITY
When making applications in hot and dry conditions. set up
equipment to produce larger droplets to reduce effects of evapo­
ration.
TEMPERATURE INVERSIONS
Thift potential is high during a temperature inversion.
Temperature inversions restrict vertical air mixing. which causes
small suspended droplets to remain close to the ground and
move latemlly in a concentrated cloud. Temperature inversions
are characterized by increasing tempemture with .lltitudc and arc
common on nights with limited ~Ioud cover and light to no
wind. They begin to form as the sun sets and often cVf1tidue into
the morning. Their presence car. be indicated by ground fog;
however. if fog is not present, inversions can also N: identitied
by the movement of smoke from a ground souree or a, a,remft
smoke generator. Smoke that layers and moves I"t~~all) in a
concentrdtcd cloud (under low wind c<mditions) indical-'c an
inversion. while smoke that moves upward and rapid I; dissi·
pates indicates good vertical air mixing.
PRECAUTIONS
Injury to or loss of desirable trees or other plants may result
from the following:
• If equipment is drained or flushed on or near desirable trees
or other plants, on areas where their roots may extend, or in
locations where the chemical may be washed or moved into
contact with their roots.
• Treatment of powdery. dry soil and light, sandy soils when
there is little likelihood of rainfall SOOt, after treatment may
result in off target movement and possible damage to
susceptible "rops when soil particles are moved by wind or
water. Injury to crops may result if treated soil is washed.
blown or moved onto land used to produce crops. Exposure
to TELAR may injure or kill most crops (except small
grains). Injury may be more severe when crops are
irrigated.
• Applications made during periods of intense rainfall. to soils
. "j \. ~ \ ,saturated with water, surfaces paved with materials such as
( r, ". ') 1 asphalt or concrete. or soils through which rainfall will not
. \ \ '0 /' readily penetrtate may result in runoff and movement of
\ ~ x...' TELAR. Do not treat frozen soil. Treated soil should be left
l. undisturbed to reduce the potential for TELAR movement
~ \ by soil erosion due to wind or water.
~~ Do not use on lawns. walks. driveways. tennis courts, or similar
areas.
Do not apply in or on irrigation ditches or canals including their
outer banks.
Do not apply through any type of irrigation sys ""n.
Do not use this product in the following counties of Colorado:
Saguache. Rio Grande, Alanlosa. Costilla. and Conejos.
STORAGE AND DISPOSAL
Storage: Store product in original container only. Do
not contaminate water. other pesticides. fenilizer. food
or feed in storage.
Product Disposal: Do not contaminate water. food or
feed by storage or disposal. Wastes resuiting from the
usc of this product may be disposed of on site or at an
approved waste disposal facility or on non·crop sites
as previously recommended.
Container Disposal: Triple rinse (or equivalent) the
container. Then offer for recycling or reconditioning.
or puncture and dispose of in a sanitary landfill. or
incineration. or. if allowed by state and local authori­
ties, by burning. If burned. stay out of smoke.
NOTICE TO BUYER: Purchase of this material does not
confer any rights under patents of countries outside of the
United States.
8
NOTICE OF WARRANTY
DuPont warrants that this product conforms to the
chemical description on the label thereof and is reasonably
fit f:>r purposes stated on such label only when used in
accordance with directions under normal use conditions. It
is impossible to eliminate all risks inherently associated
with the use of this product. Injury to adjacent crops, inef­
fectiveness or other unintended consequences may result
because of such factors as weather conditions. presence of
other materials, or the manner of use or application, all of
which are beyond the control of DuPont In no case shall
DuPont be liable for consequential. special or i,ldirect
damages resulting from the use or handling of this product.
All such risks shall be assumed by the buyer. DUPONT
MAKES NO WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE NOR
ANY OTHER EXPRESS OR IMPLIED WARRANTY
EXCEPT AS STATED ABOVE.
A product of Combelt Chemical Company.
2 A product of Thomas G. Kilfoil Company. Inc. San Bruno. Ca.
3 A registered trademark of Loveland Industries. Inc.
4 A product of Combeh Chemical Company.
0-159 050295
© 1995 E. I. du Pont de Nemours and Company, Agricllltllrall'rodllcts, Wilmington, Delawac~ 1!'S98
5