crop-chem-docs/corpus/epa_ppls/352-891.md

# ZORVEC ENICADE

- EPA Reg No: **352-891**
- Registrant: CORTEVA AGRISCIENCE, LLC
- Signal word: Caution
- Active ingredients: Oxathiapiprolin (10.2%)
- Label accepted: 2023-07-24
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000352-00891-20230724.pdf

---
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY
 WASHINGTON, DC 20460
OFFICE OF CHEMICAL SAFETY
AND POLLUTION PREVENTION

Notification ABN or Label Acceptable v.20220527
July 24, 2023

Brenda Ferguson
Regulatory Specialist
Corteva Agriscience LLC
9330 Zionsville Road
Indianapolis, IN 46268

Subject: Notification per PRN 98-10 – Add labeling for container booklet, change product
name to Zorvec Enicade, add alternate brand name of DuPont Zorvec Enicade,
and other minor label changes.
 Product Name: Zorvec Enicade
 EPA Registration Number: 352-891
 Application Date: February 21, 2022
 Decision Number: 583694

Dear Brenda Ferguson:

The Agency is in receipt of your Application for Pesticide Notification under Pesticide
Registration Notice (PRN) 98-10 for the above referenced product. The Registration Division
(RD) has conducted a review of this request for its applicability under PRN 98-10 and finds that
the action requested falls within the scope of PRN 98-10.

The label submitted with the application has been stamped “NOTIFICATION” and placed in our
records.

The brand name, “Zorvec Enicade” and alternate brand name, “DuPont Zorvec Enicade” has
been added to the product record.

Should you wish to add/retain a reference to the company’s website on your label, then please be
aware that the website becomes labeling under the Federal Insecticide, Fungicide, and
Rodenticide Act (FIFRA) and is subject to review by the Agency. If the website is false or
misleading, the product would be misbranded and unlawful to sell or distribute under FIFRA
section 12(a)(1)(E). 40 CFR 156.10(a)(5) lists examples of statements EPA may consider false or
misleading. In addition, regardless of whether a website is referenced on your product’s label,
claims made on the website may not substantially differ from those claims approved through the
registration process. Therefore, should the Agency find or if it is brought to our attention that a
website contains false or misleading statements or claims substantially differing from the EPA
approved registration, the website will be referred to the EPA’s Office of Enforcement and
Compliance.

Page 2 of 2
EPA Reg. No. 352-891
Decision No. 583694

If you have any questions, please contact Kevin Ulrich at Ulrich.kevin@epa.gov.


Sincerely,


Kristy Crews, Product Manager 22
Fungicide Branch
Registration Division (7505T)
Office of Pesticide Programs


Enclosure: Stamped Label

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 1

(Bulk/tote base label):

OXATHIAPIPROLIN GROUP 49 FUNGICIDE


DuPont™ ZORVECZorvec™ ENICADEEnicade™
[Alternate Brand Name: DuPont™ Zorvec™ Enicade™]


FUNGICIDE

GROUP U15 FUNGICIDE


Oil Dispersion

Active Ingredient By Weight
Oxathiapiprolin 10.2%
Other Ingredients 89.8%
TOTAL 100.0%

Contains 0.83 pounds of oxathiapiprolin per gallon of product

EPA Reg. No. 352-891 EPA Est. No.______

Nonrefillable Container
Net:________________
OR
Refillable Container
Net:________________


KEEP Keep OutUT OfF ReachEACH OfF CHILDRENChildren
CAUTION

Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do
notdo not understand the label, find someone to explain it to you in detail).


 Agricultural Use Requirements
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR
Part 170. Refer to the label booklet under "Agricultural Use Requirements" in the Directions for Use
section for information about this standard.


 First Aid
IF ON SKIN: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15 -20
minutes. Call a poison control center or doctor for treatment advice.

NOTE: Have the product container or label with you when calling a poison control center or doctor, or
going for treatment. For medical emergencies involving this product, call toll-free 1-800-992-5994.
See Label for Additional Precautions and Directions for Use.
352-891
07/24/2023

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 2


 Precautionary Statements
 Hazards to Humans and Domestic Animals

Avoid contact with skin or clothing ● Wash thoroughly with soap and water after handling and
before eating, drinking, chewing gum, using tobacco or using the toilet

Prolonged or frequently repeated skin contact may cause allergic reactions in some individuals.

Personal Protective Equipment (PPE)
Mixers, loaders, applicators, and other handlers must wear:
• Long-sleeved shirt
• Long pants
• Shoes and socks
• Chemical-resistant gloves made of barrier laminate, nitrile rubber > 14 mils, neoprene rubber > 14
mils, or Viton > 14 mils

See engineering control statements for additional requirements.

User Safety Requirements

Follow the manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables
exist, use detergent and hot water. Keep and wash PPE separately from other laundry.

 Engineering Control Statements:
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements
listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-6)], the
handler PPE requirements may be reduced or modified as specified in the WPS.


 User Safety Recommendations
Users should:
• Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet.
• Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on
clean clothing.
• Remove PPE immediately after handling this product. Wash the outside of gloves before
removing. As soon as possible, wash thoroughly and change into clean clothing.


 STORAGE AND DISPOSAL

PESTICIDE STORAGE: Keep container closed when not in use. Always store pesticides in the original
container only, away from other pesticides, food, pet food, feed, seed, fertilizers, and veterinary
supplies. If a leaky container must be contained within another, mark the outer container to identify the
contents. Storage areas must be locked and secure from vandalism, with precautionary signs posted.
The storage area must be dry, well-lit, and well- ventilated. Keep pesticide storage areas clean. Clean
up any spills promptly. Protect pesticide containers from extreme heat and cold. Store herbicides,
insecticides and fungicides in separate areas within the storage unit. Place liquid formulations on lower
shelves and dry formulations above. Maintaining a spill kit and fire extinguisher on hand and having
emergency phone numbers posted will allow you to be prepared for emergencies. If spill cleanup PPE
is stored nearby, but outside the pesticide storage area, it will be accessible when needed.

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 3


PESTICIDE DISPOSAL: Wastes resulting from the use of this product must be disposed of on site or
at an approved waste disposal facility.

CONTAINER HANDLING: Refer to the Net Contents section of this product’s labeling for the
applicable “Nonrefillable Container” or “Refillable Container” designation.

Nonrefillable Rigid Plastic and Metal Containers (Capacity Equal to or Less Than 5 Gallons):
Nonrefillable container. Do not reuse or refill this container. Triple rinse container (or equivalent)
promptly after emptying. Triple rinse as follows: Empty the remaining contents into application
equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full
with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or
store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this
procedure two more times. Then, for Plastic Containers, offer for recycling if available or puncture and
dispose of in a sanitary landfill, or by incineration. Do not burn, unless allowed by state and local
ordinances. For Metal Containers, offer for recycling if available or reconditioning if appropriate, or
puncture and dispose of in a sanitary landfill, or by other procedures approved by state and lo cal
authorities.

Nonrefillable Rigid Plastic and Metal Containers (Capacity Greater Than 5 Gallons): Nonrefillable
container. Do not reuse or refill this container. Triple rinse container (or equivalent) promptly after
emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix
tank. Fill the container 1/4 full with water. Replace and tighten closures. Tip container on its side and
roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Sta nd the container on
its end and tip it back and forth several times. Turn the container over onto its other end and tip it back
and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for
later use or disposal. Repeat this procedure two more times. Then, for Plastic Containers, offer for
recycling if available or puncture and dispose of in a sanitary landfill, or by incineration. Do not burn,
unless allowed by state and local ordinances. For Metal Containers, offer for recycling if available or
reconditioning if appropriate, or puncture and dispose of in a sanitary landfill, or by other procedures
approved by state and local authorities.

Nonrefillable Rigid Plastic and Metal Containers, e.g., Intermediate Bulk Co ntainers [IBC] (Size
or Shape Too Large to be Tipped, Rolled or Turned Upside Down): Nonrefillable container. Do not
reuse or refill this container. Clean container promptly after emptying the contents from this container
into application equipment or mix tank and before final disposal using the following pressure rinsing
procedure. Insert a lance fitted with a suitable tank cleaning nozzle into the container and ensure that
the water spray thoroughly covers the top, bottom and all sides inside the containe r. The nozzle
manufacturer generally provides instructions for the appropriate spray pressure, spray duration and/or
spray volume. If the manufacturer’s instructions are not available, pressure rinse the container for at
least 60 seconds using a minimum pressure of 30 PSI with a minimum rinse volume of 10% of the
container volume. Drain, pour or pump rinsate into application equipment or rinsate collection system.
Repeat this pressure rinsing procedure two more times. Then, for Plastic Containers, offer for recycling
if available or puncture and dispose of in a sanitary landfill, or by incineration. For Metal Containers,
offer for recycling if available or reconditioning if appropriate, or puncture and dispose of in a sanitary
landfill, or by other procedures approved by state and local authorities.

All Refillable Containers: Refillable container. Refilling Container: Refill this container with Zorvec
Enicade™ fungicide containing oxathiapiprolin only. Do not reuse this container for any other purpose.
Cleaning before refilling is the responsibility of the refiller. Prior to refilling, inspect carefully for damage
such as cracks, punctures, abrasions, worn out threads and closure devices. If damage is found, do
not use container; contact Corteva at the number below for instructions. Check for leaks after refilling
and before transporting. If leaks are found, do not reuse or transport container; contact Corteva at the
number below for instructions. Disposing of Container: Do not reuse this container for any other
purpose other than refilling (see preceding). Cleaning the container before final disposal is the
responsibility of the person disposing of the container. To clean the container before final disposal, use

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 4

the following pressure rinsing procedure. Insert a lance fitted with a suitable tank cleaning nozzle into
the container and ensure that the water spray thoroughly covers the top, bottom and all sides insi de the
container. The nozzle manufacturer generally provides instructions for the appropriate spray pressure,
spray duration and/or spray volume. If the manufacturer’s instructions are not available, pressure rinse
the container for at least 60 seconds using a minimum pressure of 30 PSI with a minimum rinse
volume of 10% of the container volume. Drain, pour or pump rinsate into application equipment or
rinsate collection system. Repeat this pressure rinsing procedure two more times. Then, for Plastic
Containers, offer for recycling if available or puncture and dispose of in a sanitary landfill, or by
incineration. Do not burn, unless allowed by state and local ordinances. For Metal Containers, offer for
recycling if available or reconditioning if appropriate, or puncture and dispose of in a sanitary landfill, or
by other procedures approved by state and local authorities.

Refer to the inside of label booklet for additional precautionary information and Directions for
Use.

Notice: Read the entire label. Use only according to label directions. Before using this product, read
Warranty Disclaimer, Inherent Risks of Use and Limitation of Remedies at end of label booklet. If
terms are unacceptable, return at once unopened.

Do not contaminate water, food, or feed by storage and disposal.

Do not transport if container is damaged or leaking. If the container is damaged, leaking or obsolete, or in
the event of a major spill, fire or other emergency, contact Corteva at 1-800-992-5994, day or night.


EPA Reg. No. 352-891 EPA Est. No.______

™® Trademarks of Corteva Agriscience and its affiliated companies

Produced for
Corteva Agriscience LLC
9330 Zionsville Road
Indianapolis, IN 46268


 Nonrefillable Container
Net:________________
OR
Refillable Container
Net:________________NET CONTENTS: _____________


FIRST AID

IF ON SKIN: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15 -20
minutes. Call a poison control center or doctor for treatment advice.

Have the product container or label with you when calling a poison control center or doctor, or go ing for
treatment. For medical emergencies involving this product, call toll-free 1-800-441-3637. See
Label for Additional Precautions and Directions for Use.

PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 5

CAUTION

Avoid contact with skin or clothing. Wash thoroughly with soap and water after handling and before
eating, drinking, chewing gum, using tobacco or using the toilet. Wear chemical-resistant gloves made
of barrier laminate, nitrile rubber > 14 mils, neoprene rubber > 14 mils, or Viton >14 mils. Prolonged or
frequently repeated skin contact may cause allergic reactions in some individuals.

PERSONAL PROTECTIVE EQUIPMENT (PPE)

Mixers, loaders, applicators, and other handlers must wear:
• Long-sleeved shirt
• Long pants
• Shoes and socks
• Chemical-resistant gloves made of barrier laminate, nitrile rubber > 14 mils, neoprene rubber > 14
mils, or Viton > 14 mils.

See engineering control statements for additional requirements.

User Safety Requirements

Follow the manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for
washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry.

ENGINEERING CONTROL STATEMENTS:

When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the
requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR
170.240(d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS.

USER SAFETY RECOMMENDATIONS

Users should wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet.
Users should remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly
and put on clean clothing. Users should remove PPE immediately after handling this product.
Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change
Into clean clothing.


ENVIRONMENTAL HAZARDS

This product is toxic to aquatic invertebrates. For terrestrial uses: Do not apply directly to water, or to
areas where surface water is present or to intertidal areas below the mean high water mark. Do not
contaminate water when disposing of equipment washwater or rinsate.

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 6

(Booklet cover / small container base label):

OXATHIAPIPROLIN GROUP 49 FUNGICIDE

Zorvec™ Enicade™
[Alternate Brand Name: DuPont™ Zorvec™ Enicade™]
FUNGICIDE


Oil Dispersion

Active Ingredient By Weight
Oxathiapiprolin 10.2%
Other Ingredients 89.8%
TOTAL 100.0%

Contains 0.83 pounds of oxathiapiprolin per gallon of product

Keep Out Of Reach Of Children
CAUTION

Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do
not understand the label, find someone to explain it to you in detail).

 Agricultural Use Requirements
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR
Part 170. Refer to the label booklet under "Agricultural Use Requirements" in the Directions for Use
section for information about this standard.

Refer to the inside of label booklet for additional precautionary information including First Aid and
Directions for Use.

Notice: Read the entire label. Use only according to label directions. Before using this product, read
Warranty Disclaimer, Inherent Risks of Use and Limitation of Remedies at end of label booklet. If
terms are unacceptable, return at once unopened.

Do not contaminate water, food, or feed by storage and disposal.

Do not transport if container is damaged or leaking. If the container is damaged, leaking or obsolete, or in
the event of a major spill, fire or other emergency, contact Corteva at 1-800-992-5994, day or night.


EPA Reg. No. 352-891 EPA Est. No.______

™® Trademarks of Corteva Agriscience and its affiliated companies

Produced for
Corteva Agriscience LLC
9330 Zionsville Road
Indianapolis, IN 46268


NET CONTENTS: _____________

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 7


[Booklet page 1 through end):


 First Aid
IF ON SKIN: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15 -20
minutes. Call a poison control center or doctor for treatment advice.

NOTE: Have the product container or label with you when calling a poison control center or do ctor, or
going for treatment. For medical emergencies involving this product, call toll-free 1-800-992-5994.
See Label for Additional Precautions and Directions for Use.


 Precautionary Statements
 Hazards to Humans and Domestic Animals

CAUTION

Avoid contact with skin or clothing ● Wash thoroughly with soap and water after handling and
before eating, drinking, chewing gum, using tobacco or using the toilet

Prolonged or frequently repeated skin contact may cause allergic reactions in some individuals.


Personal Protective Equipment (PPE)

Mixers, loaders, applicators, and other handlers must wear:
• Long-sleeved shirt
• Long pants
• Shoes and socks
• Chemical-resistant gloves made of barrier laminate, nitrile rubber > 14 mils, neoprene rubber > 14
mils, or Viton > 14 mils

See engineering control statements for additional requirements.

Follow the manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables
exist, use detergent and hot water. Keep and wash PPE separately from other laundry.


 Engineering Control Statements:
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements
listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-6)], the
handler PPE requirements may be reduced or modified as specified in the WPS.

User Safety Recommendations
Users should:
• Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet.
• Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on
clean clothing.
• Remove PPE immediately after handling this product. Wash the outside of gloves before
removing. As soon as possible, wash thoroughly and change into clean clothing.

 Environmental Hazards

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 8

This product is toxic to aquatic invertebrates. For terrestrial uses: Do not apply directly to water, or to
areas where surface water is present or to intertidal areas below the mean high water mark. Do not
contaminate water when disposing of equipment washwater or rinsate.

 Directions for Use
DIRECTIONS FOR USE

It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. DuPont™
ZORVECZorvec™ ENICADEEnicade™ fungicide (referred to below as DuPont ZORVEC Zorvec
ENICADE Enicade fungicide, ZORVEC ENICADE fungicide, or ZORVEC Zorvec ENICADEEnicade) must
be used only in accordance with instructions on this label, in separately issued labeling or exemptions
under FIFRA (Supplemental Labels, Special Local Need Registration, FIFRA Section 18 exemptions), or
as otherwise permitted by FIFRA. Always read the entire label including the Limitation of Warranty and
LiabilityTerms and Conditions of Use.

Zorvec Enicade fungicide, is an oil dispersion containing oxathiapiprolin, and is recommended for use by
foliar or soil application for the control or suppression of the diseases listed on this label.

AGRICULTURAL USE REQUIREMENTSAgricultural Use Requirements

Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR
part 170. This Standard contains requirements for the protection of agricultural workers on farms,
forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements
for training, decontamination, notification and emergency assistance. It also contains specific
instructions and exceptions pertaining to the statements on the label about personal protective
equipment (PPE), and restricted-entry interval, and notification to workers (as applicable). The
requirements in this box only apply to uses of this product that are covered by the Worker Protection
Standard.

Do not apply this product in a way that will contact workers or other persons, either directly or through
drift. Only protected handlers may be in the area during application. For any requirements specific to
your State or Tribe, consult the State or Tribal agency responsible for pesticide regulation.

Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 4
hours. PPE required for early entry to treated areas that is permitted under the Worker Protection
Standard and that involves contact with anything that has been treated, such as plants, soil, or water,
is:
• Coveralls
• Shoes and socks
• Chemical resistant gloves (made of any waterproof material)


DuPont ZORVEC ENICADE fungicide, is an oil dispersion containing oxathiapiprolin, and is
recommended for use by foliar or soil application for the control or suppression of the diseases listed on
this label.
STORAGE AND DISPOSAL
Do not contaminate water, food, or feed by storage and disposal.

PESTICIDE STORAGE: Keep container closed when not in use. Always store pesticides in the original
container only, away from other pesticides, food, pet food, feed, seed, fertilizers, and veterinary
supplies. If a leaky container must be contained within another, mark the outer container to identify the
contents. Storage areas must be locked and secure from vandalism, with precautionary signs posted.
The storage area must be dry, well-lit, and well- ventilated. Keep pesticide storage areas clean. Clean
up any spills promptly. Protect pesticide containers from extreme heat and cold. Store herbicides,

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 9

insecticides and fungicides in separate areas within the storage unit. Place liquid formulations on lower
shelves and dry formulations above. Maintaining a spill kit and fire extinguisher on hand and having
emergency phone numbers posted will allow you to be prepared for emergencies. If spill cleanup PPE
is stored nearby, but outside the pesticide storage area, it will be accessible when needed.

PESTICIDE DISPOSAL: Wastes resulting from the use of this product must be disposed of on site or
at an approved waste disposal facility.

CONTAINER HANDLING: Refer to the Net Contents section of this product’s labeling for the
applicable “Nonrefillable Container” or “Refillable Container” designation.

Nonrefillable Rigid Plastic and Metal Containers (Capacity Equal to or Less Than 5 Gallons):
Nonrefillable container. Do not reuse or refill this container. Triple rinse container (or equivalent)
promptly after emptying. Triple rinse as follows: Empty the remaining contents into application
equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full
with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or
store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this
procedure two more times. Then, for Plastic Containers, offer for recycling if available or puncture and
dispose of in a sanitary landfill, or by incineration. Do not burn, unless allowed by state and local
ordinances. For Metal Containers, offer for recycling if available or reconditioning if appropriate, or
puncture and dispose of in a sanitary landfill, or by other procedures approved by state and lo cal
authorities.

Nonrefillable Rigid Plastic and Metal Containers (Capacity Greater Than 5 Gallons): Nonrefillable
container. Do not reuse or refill this container. Triple rinse container (or equivalent) promptly after
emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix
tank. Fill the container 1/4 full with water. Replace and tighten closures. Tip container on its side and
roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Sta nd the container on
its end and tip it back and forth several times. Turn the container over onto its other end and tip it back
and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for
later use or disposal. Repeat this procedure two more times. Then, for Plastic Containers, offer for
recycling if available or puncture and dispose of in a sanitary landfill, or by incineration. Do not burn,
unless allowed by state and local ordinances. For Metal Containers, offer for recycling if available or
reconditioning if appropriate, or puncture and dispose of in a sanitary landfill, or by other procedures
approved by state and local authorities.

Nonrefillable Rigid Plastic and Metal Containers, e.g., Intermediate Bulk Co ntainers [IBC] (Size
or Shape Too Large to be Tipped, Rolled or Turned Upside Down): Nonrefillable container. Do not
reuse or refill this container. Clean container promptly after emptying the contents from this container
into application equipment or mix tank and before final disposal using the following pressure rinsing
procedure. Insert a lance fitted with a suitable tank cleaning nozzle into the container and ensure that
the water spray thoroughly covers the top, bottom and all sides inside the containe r. The nozzle
manufacturer generally provides instructions for the appropriate spray pressure, spray duration and/or
spray volume. If the manufacturer’s instructions are not available, pressure rinse the container for at
least 60 seconds using a minimum pressure of 30 PSI with a minimum rinse volume of 10% of the
container volume. Drain, pour or pump rinsate into application equipment or rinsate collection system.
Repeat this pressure rinsing procedure two more times. Then, for Plastic Containers, offer for recycling
if available or puncture and dispose of in a sanitary landfill, or by incineration. For Metal Containers,
offer for recycling if available or reconditioning if appropriate, or puncture and dispose of in a sanitary
landfill, or by other procedures approved by state and local authorities.

All Refillable Containers: Refillable container. Refilling Container: Refill this container with Zorvec
Enicade fungicide containing oxathiapiprolin only. Do not reuse this container for any other purpose.
Cleaning before refilling is the responsibility of the refiller. Prior to refilling, inspect carefully for damage
such as cracks, punctures, abrasions, worn out threads and closure devices. If damage is found, do
not use container; contact Corteva at the number below for instructions. Check for leaks after refilling

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 10

and before transporting. If leaks are found, do not reuse or transport container; contact Corteva at the
number below for instructions. Disposing of Container: Do not reuse this container for any othe r
purpose other than refilling (see preceding). Cleaning the container before final disposal is the
responsibility of the person disposing of the container. To clean the container before final disposal, use
the following pressure rinsing procedure. Insert a lance fitted with a suitable tank cleaning nozzle into
the container and ensure that the water spray thoroughly covers the top, bottom and all sides inside the
container. The nozzle manufacturer generally provides instructions for the appropriate spray p ressure,
spray duration and/or spray volume. If the manufacturer’s instructions are not available, pressure rinse
the container for at least 60 seconds using a minimum pressure of 30 PSI with a minimum rinse
volume of 10% of the container volume. Drain, pour or pump rinsate into application equipment or
rinsate collection system. Repeat this pressure rinsing procedure two more times. Then, for Plastic
Containers, offer for recycling if available or puncture and dispose of in a sanitary landfill, or by
incineration. Do not burn, unless allowed by state and local ordinances. For Metal Containers, offer for
recycling if available or reconditioning if appropriate, or puncture and dispose of in a sanitary landfill, or
by other procedures approved by state and local authorities.


Restrictions
• Different application methods (foliar and soil) must not be combined when protecting a crop during a
growing season.
• Use this product only in commercial and farm plantings.
• Do not use for home plantings.
• May be used in greenhouse production of tomatoes, bell and non-bell peppers, and edible peel
cucurbits (cucumbers, summer squash). Do not use in greenhouses on any other crops.
• ZORVEC ENICADE fungicide must be used only in accordance with this label.
• Do not formulate this product into other end-use products.

PRODUCT INFORMATION

ZORVEC ENICADEZorvec Enicade fungicide is active against selective Oomycete diseases listed on this
label. ZORVEC ENICADEZorvec Enicade is a systemic fungicide and moves systemically in the plant
xylem. Uptake into the leaf tissue allows good translaminar movement and protection of new plant
growth.
ZORVEC ENICADEZorvec Enicade must be applied in a regularly scheduled protective spray program in
rotation with other fungicides. See directions below for specific crop/disease recommendations.

Restrictions
• Different application methods (foliar and soil) must not be combined when protecting a crop during a
growing season.
• Use this product only in commercial and farm plantings.
• Do not use for home plantings.
• May be used in greenhouse production of tomatoes, bell and non-bell peppers, and edible peel
cucurbits (cucumbers, summer squash). Do not use in greenhouses on any other crops.
• Zorvec Enicade fungicide must be used only in accordance with this label.
• Do not formulate this product into other end-use products.


Rainfastness

ZORVEC ENICADEZorvec Enicade fungicide rapidly penetrates into plant tissues and is rainfast within
30 minutes after spray residues have dried.

Mode-of-action

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 11

Oxathiapiprolin, the active ingredient in ZORVEC ENICADEZorvec Enicade, acts as an oxysterol binding
protein modulator in fungal cells.

Cultivar/Varietal Crop Safety

Not all crops within a crop group, and not all varieties, cultivars or hybrids of crops, have been individually
tested for crop safety. It is not possible to evaluate for crop safety all applications of ZORVEC
ENICADEZorvec Enicade on all crops within a crop group, on all varieties, cultivars, or hybrids of those
crops, or under all environmental conditions and growing circumstances. To test for crop safety, apply the
product in accordance with the label instructions to a small area of the target crop to ensure that a
phytotoxic response will not occur, especially where the application is a new use of the product by the
applicator.


INTEGRATED PEST MANAGEMENT

DuPont Corteva recommends the use of Integrated Pest Management (IPM) programs to control pests.
DuPont ZORVEC Zorvec ENICADE Enicade may be used as part of an IPM program which can include
biological, cultural, and genetic practices aimed at preventing economic pest damage. Application of this
product should be based on IPM principles and practices including field scouting or other detection
methods, correct target pest identification, population monitoring, and treating when disease forecasting
models reach locally determined action levels. Consult your state cooperative extension service,
professional consultants, or other qualified authorities to determine the appropriate management, cultural
practice and treatment threshold levels for the specific crop, geography and diseases.

RESISTANCE MANAGEMENT

ZORVEC ENICADEZorvec Enicade contains the active ingredient oxathiapiprolin which is novel and is
currently assigned the Code U15 49 by the Fungicide Resistance Action Committee (FRAC).
Oxathiapiprolin inhibits the oxysterol-binding protein (OSBP). Repeated use of products for control of
specific plant pathogens may lead to selection of resistant strains of fungi and result in a reduction of
disease control. A disease management program for ZORVEC ENICADEZorvec Enicade that includes
rotation and tank mixing with fungicides with a different mode of action is essential to reduce the risk of
fungicide resistance development. Do not tank mix ZORVEC ENICADEZorvec Enicade with any fungicide
for which resistance to the target disease has developed. Make no more than 2 sequential applications of
ZORVEC ENICADEZorvec Enicade before rotating to a fungicide with a different mode of action. Do not
follow soil applications of ZORVEC ENICADEZorvec Enicade or DuPont ZORVEC EPICALTRINZorvec
Epicaltrin™ with foliar applications of ZORVEC ENICADEZorvec Enicade. Different application methods
(foliar and soil) must not be combined when protecting a crop during a growing season. Do not use
ZORVEC ENICADEZorvec Enicade for more than 33% of the total fungicide applications per season per
crop. For guidance on a particular crop and disease control situation, consult your state extension
specialist for official state recommendations.

TANK MIXTURES

Always follow the tank mix instructions of the product label that is most restrictive. Apply at least the
minimum labeled rate of each fungicide in the tank mix.

The crop safety of all tank mixtures with ZORVEC ENICADEZorvec Enicade which may include physically
compatible pesticides, fertilizers, adjuvants, and/or additives, has not been tested. When using a tank
mixture with ZORVEC ENICADEZorvec Enicade, it is important to understand crop safety. To test for crop
safety prepare a small volume of the intended tank mixture, apply it to an area of the target crop as
directed by both this label and the tank mix partner product labels, and observe the treated crop to ensure
that a phytotoxic response does not occur. DuPont Corteva will not be responsible for any crop injury

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 12

arising from the use of a tank mixture that is not specifically described on ZORVEC ENICADEZorvec
Enicade product labeling or in other DuPontCorteva product use instructions.

Some materials including oils, surfactants, adjuvants, and pesticide formulations when applied
individually, sequentially, or in tank mixtures may solubilize the plant cuticle, facilitate penetration into
plant tissue, and increase potential for crop injury.

Always follow the tank mix instructions of the product label that is the most restrictive. Consult a DuPont
Corteva representative or local agricultural authorities for more information concerning tank mixtures.

PHYSICAL COMPATIBILITY

DuPont ZORVEC ENICADEZorvec Enicade is physically compatible with many commonly used
fungicides, herbicides, insecticides, biological control products, liquid fertilizers, non -ionic surfactants,
crop oils, methylated seed oils and drift control additives. However, since the formulations of products
change, it is important to test the physical compatibility of desired tank mixes and check for undesirable
physical effects, including settling out or flocculation. To determine physical compatibility, add the
proportions of the tank mix products and water to a small container, mix thoroughly and allow to stand for
20 minutes. If the combination remains mixed, or can be re-mixed readily, it may be considered physically
compatible.

FOLIAR APPLICATION INFORMATION

Foliar Application Volumes

• For conventional ground application, apply a minimum of 15 gallons per acre, increasing the spray
volume as the plants mature to ensure thorough coverage of the foliage.
• For air-assisted ground application, apply a minimum of 10 gallons per acre.
• For aerial application, apply a minimum of 2 gallons per acre.

Application Equipment

ZORVEC ENICADEZorvec Enicade can be applied with commonly used ground equipment, hose-end,
pressurized, greenhouse and hand-held sprayers, air or chemigation equipment, except as otherwise
directed, using sufficient water to obtain thorough coverage of plants. Maintain agitation during mixing
and application to assure uniform product suspension.

Mixing Instructions - ZORVEC ENICADEZorvec Enicade alone

1. Fill clean spray tank 1/2 - 2/3 full of water.
2. While agitating, add the required amount of ZORVEC ENICADEZorvec Enicade, continuing agitation
until the product is completely dispersed.
3. Continue filling the tank, with agitation. Spray immediately after preparation, continuing agitation
during spraying.

Adjuvants

ZORVEC ENICADEZorvec Enicade may be used with adjuvants, for example, nonionic surfactants, crop
oils, methylated seed oils, and blends at typical agricultural use rates for these adjuvants.

Tank Mixing Sequence

When using in a tank-mix, add different formulation types in the sequence indicated below. Allow time for
complete mixing and dispersion after addition of each product.

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 13

1. Water soluble bag (WSB).
2. Water soluble granules (SG).
3. Water dispersible granules (WG).
4. Wettable powders (WP).
5. Water-based suspension concentrates (SC).
6. Capsule suspension (CS).
7. Suspo emulsion (SE).
8. Oil dispersion (OD) (ZORVEC ENICADEZorvec Enicade).
9. Emulsion in water (EW).
10. Emulsifiable concentrates (EC).
11. Water-soluble concentrates (SL).
12. Adjuvants, surfactants, oils.
13. Soluble fertilizers.
14. Drift retardants.

SOIL APPLICATION INFORMATION

For suppression or control of soil borne diseases, as recommended in this label, DuPont ZORVEC
ENICADEZorvec Enicade must be applied in a manner that ensures the product solution adequately
saturates the target crop root/crown zone. When applied to the root/crown zone before, during, or soon
after sowing or transplanting the crop, ZORVEC ENICADEZorvec Enicade will suppress or control certain
seedling root rot and crown diseases that limit crop stand establishment.

For soil application, apply ZORVEC ENICADEZorvec Enicade using drip application, transplant water
application (water wheel or continuous stream transplanters), surface band or directed application, or in -
furrow application. If the application method does not move the product to the target root/crown disease
zone, the application must be followed with irrigation or cultivation to correctly place the product for
disease control.

Drip application

See Table 1, below, and specific drip chemigation instructions under Chemi gation.

Transplant Water application

Transplants should be adequately watered before transplanting. Ensure transplant water volume is
sufficient to thoroughly wet the root zone.

See Table 1 for Continuous Stream Transplanters. Ensure 4-8 oz transplant water/ transplant depending
on sandy (4 oz) vs silty soil (6-8 oz).

For Water Wheel transplanters, use the plant population to determine the rate per plant.

Example: 38.6 fl oz product/acre x acre/4356 squash plants = 0.00886 fl oz product/squash plant .

Surface Band or Directed application

Apply in a 4-12 inch band. See Table 1 for rates. Follow application with cultivation or irrigation (0.5
- 1 inch) to move ZORVEC ENICADEZorvec Enicade to the target disease zone.

Table 1. Soil application rates for ZORVEC ENICADEZorvec Enicade product/1000 feet of row,
based on plant row spacing.

ZORVEC ENICADEZorvec Enicade Conversion Chart for Drip (Trickle) Chemigation, Continuous Transplant Water, and
Directed/Banded/In-Furrow application

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 14

Corresponding
field rate fl
oz/acre
Rate in fl oz product/1000 row ft; based on planted row spacing (in inches) of:
30 34 36 48 60 72 84
4.8 0.28 0.31 0.33 0.44 0.55 0.66 0.77
9.6 0.55 0.62 0.66 0.88 1.10 1.32 1.54
19.2 1.10 1.25 1.32 1.76 2.20 2.65 3.09
38.6 2.22 2.51 2.66 3.55 4.43 5.32 6.20

Transplant Tray Application

Apply as a foliar spray to the transplants in the transplant tray 24-48 hrs prior to transplanting.
Immediately water the spray off the foliage into the transplant tray soil, not watering past soil saturation.

Wait 24 hours to transplant.

For this application, the acre of transplants receives the full recommended acre rate for transplant tray
application, applied as a foliar spray, which is then washed into the transplant cubes. Transplant cubes
should be on the dry side at the beginning of this treatment.

CROP ROTATION

Table 2. Crop Rotation Intervals for DuPont ZORVEC ENICADEZorvec Enicade


Crop, Crop Group, or Subgroup
Plantback Restriction (in Days) following Last
Application of ZORVEC ENICADEZorvec
Enicade
Tuberous and Corm Vegetables (Subgroup 1C) 0
Bulb Vegetables (Group 3-07) 0
Leafy Greens (Subgroup 4A) 0
Brassica, Head and Stem (Subgroup 5A) 0
Peas, Succulent Shelled 0
Peas, Edible-Podded 0
Fruiting Vegetables (Group 8-10) 0
Cucurbit Vegetables (Group 9) 0
Strawberries 0
Herbs and Spices (Group 19) 0
Oilseed (Group 20) 0
Ginseng 0
Tobacco 0
Cereals (Group 15,16) 30
Grass animal feeds (Group 17) 30
Legume Vegetables, except succulent shelled and
edible- podded peas 180
Non-grass Animal feed (Group 18) 180
Peanuts 180
All other crops not listed 180

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 15


Table 3. DuPont ZORVEC ENICADEZorvec Enicade fungicide labeled Crop and Crop groups, Pre-
Harvest Intervals, Maximum Single Application Rates, and Total Rates allowed per year.


Crop or Crop Group or
subgroup, with examples
Minimum Time from
Application to Harvest
(PHI days)
Maximum Rate per Acre
per Application
(fl oz product)
Maximum Product
per Acre per Year
(fl oz product)
Brassica, Head and Stem
(Crop Subgroup 5A)
cabbage, broccoli,
cauliflower
0 4.8 19.2
Bulb Vegetables (Crop
Group 3-07)
0 4.8 19.2
Cucurbit Vegetables (Crop
Group 9)
cucumber, cantaloupe,
watermelon, squash
0 4.8 foliar or
38.6 soil
19.2 foliar or
77.2 soil
Fruiting Vegetables (Crop
Group 8-10)
tomato, pepper
0 4.8 foliar or
38.6 soil
19.2 foliar or
77.2 soil
Ginseng* 14 38.6 77.2
Leafy Greens (Crop
Subgroup 4A)
lettuce, spinach
0 4.8 foliar or
38.6 soil
19.2 foliar or
77.2 soil
Peas, Succulent Shelled and
Edible-Podded*
0 4.8 19.2
Tuberous and Corm
Vegetables* (Crop
Subgroup 1C)
potato
5 6.8 27.2
Tobacco* 7 4.8 foliar or
38.6 soil
19.2 foliar or
77.2 soil
* Not for use on these crops in California.

USE RATES AND APPLICATION INSTRUCTIONS

Crop/Crop Group Target Diseases Use Rate per Acre (fl oz) Remarks
Brassica, Head and Stem (Crop
Subgroup 5A)
Broccoli;
broccoli, Chinese (gai lon);
brussels sprouts;
cabbage;
cabbage, Chinese; (napa);
cabbage, Chinese mustard (gai
choy);
cauliflower;
cavalo broccolo;
kohlrabi
Downy mildew
(Peronospora parasitica)
2.0 - 4.8 fl oz Begin foliar applications prior
to disease development, and
continue on a 5- to 10-day
interval. Use the higher rates
when disease is present, for
longer application intervals, or
for susceptible varieties.
Restrictions
Make no more than 2 sequential applications before rotating to a fungicide with a different mode of action. Do not use DuPont
ZORVEC ENICADEZorvec Enicade for more than 33% of the total foliar fungicide applications or make more than four applications
of product per crop, whichever is more restrictive. Do not exceed six foliar applications of ZORVEC ENICADEZorvec Enicade per
acre per year for the same crop. The minimum spray interval is 5 days. The minimum time from application to harvest (PHI) is 0
days. Do not exceed 19.2 fl oz of ZORVEC ENICADEZorvec Enicade product per acre per year.

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 16


Crop/Crop Group Target Diseases Use Rate per Acre (fl oz) Remarks
Bulb Vegetables
(Crop Group 3-07)
Chive, fresh leaves;
chive, Chinese, fresh leaves;
daylily, bulb;
elegans hosta;
fritillaria, bulb;
fritillaria, leaves;
garlic, bulb;
garlic, great-headed, bulb;
garlic, serpent, bulb;
kurrat;
lady’s leek;
leek;
leek, wild;
lily, bulb;
onion, Beltsville bunching;
onion, bulb;
onion, Chinese, bulb;
onion, fresh;
onion, green;
onion, macrostem;
onion, pearl;
onion, potato, bulb;
onion, tree, tops;
onion, Welsh, tops;
shallot, bulb;
shallot, fresh leaves
Downy mildew
(Peronospora destructor)
2.0 - 4.8 fl oz Begin applications prior to
disease development, and
continue on a 5- to 10-day
interval. Use the higher rates
when disease is present, for
longer application intervals, or
for susceptible varieties.
Restrictions
Make no more than 2 sequential applications before rotating to a fungicide with a different mode of action. Do not use ZORVEC
ENICADE Zorvec Enicade for more than 33% of the total foliar fungicide applications or make more than four applications of
product per crop, whichever is more restrictive. Do not exceed six foliar applications of ZORVEC ENICADEZorvec Enicade per acre
per year for the same crop. The minimum spray interval is 5 days. The minimum time from application to harvest (PHI) is 0 days.
Do not exceed 19.2 fl oz of ZORVEC ENICADEZorvec Enicade product per acre per year.

Crop/Crop Group Target Diseases Use Rate per Acre (fl oz) Remarks
Cucurbit Vegetables
(Crop Group 9)
Chayote (fruit);
Chinese waxgourd (Chinese
preserving melon);
citron melon;
cucumber (field and
greenhouse);
gherkin;
gourd, edible (includes hyotan,
cucuzza, hechima, Chinese
okra);
Momordica spp. (includes
balsam apple, balsam pear,
bittermelon, Chinese
cucumber);
muskmelon (includes
cantaloupe - other examples in
footnote (1));
pumpkin;
squash, summer (field and
greenhouse) (includes
Downy mildew
(Pseudoperonospora cubensis)
2.0 - 4.8 fl oz Begin foliar applications prior
to disease development, and
continue on a 5- to 14-day
interval. Use the higher rates
when disease is present, for
longer application intervals, or
for susceptible varieties.
Phytophthora Blight
(Phytophthora capsici)
2.0 - 4.8 fl oz Begin foliar applications prior
to disease development, and
continue on a 3- to 14-day
interval. Use the higher rates
when disease is present, for
longer application intervals, or
for susceptible varieties.
For pickle fruit protection,
apply with a copper fungicide
starting at 1 inch fruit on 3- to
5-day intervals.

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 17

crookneck squash, scallop
squash, straightneck squash,
vegetable marrow, zucchini);
squash, winter (includes
butternut squash, calabaza,
hubbard squash, acorn squash,
spaghetti squash);
watermelon
Phytophthora Blight
(Phytophthora capsici)
4.8 - 38.6 fl oz Apply at plant, in furrow, drip
or in transplant water. See
specific Soil Application
Directions in this label.


Restrictions
The minimum time from application to harvest (PHI) is 0 days. Do not follow soil applications of DuPont Zorvec Enicade
ZORVEC ENICADE or DuPont ZORVEC EPICALTRINZorvec Epicaltrin with foliar applications of ZORVEC ENICADEZorvec
Enicade. Use either soil applications or foliar applications but not both for disease control. Do not make more than four
applications of product per crop by either method. Do not exceed six foliar applications of ZORVEC ENICADE Zorvec
Enicade per acre per year for the same crop. Annual maximums for specific use patterns are listed below.

Foliar and fruit applications

Make no more than 2 sequential applications before rotating to a fungicide with a different mode of action. Do not use ZORVEC
ENICADE Zorvec Enicade for more than 33% of the total foliar fungicide applications. The minimum spray interval for foliar
applications is 3 days. Do not exceed 19.2 fl oz ZORVEC ENICADEZorvec Enicade foliar use per acre per year.

For Downy Mildew or Phytophthora foliar control on edible peel cucurbits (cucumbers, summer squash) in the
greenhouse:

Use ZORVEC ENICADEZorvec Enicade at a rate range of 0.07 - 0.167 fl oz of product (0.42 tsp - 1 tsp) per gallon of spray per
1518 sq ft for Downy Mildew control.

Use a rate range of 0.07 - 0.167 fl oz of product (0.42 tsp - 1 tsp) per gallon of spray per 1518 sq ft for Phytophthora foliar control.

These rates equal the field rates of 2.0 - 4.8 fl oz/acre.

Soil applications

Make no more than 2 sequential applications before rotating to a fungicide with a different mode of action. Do not use Zorvec
Enicade ZORVEC ENICADE for more than 33% of the total soil fungicide applications. The minimum soil application interval is 7
days. Do not exceed 77.2 fl oz ZORVEC ENICADEZorvec Enicade soil use per acre per year.
(1) Muskmelon: includes true cantaloupe, cantaloupe, casaba, Santa Claus melon, crenshaw melon, honeydew melon, honey balls,
Persian melon, golden pershaw melon, mango melon, pineapple melon, snake melon.

Crop/Crop Group Target Diseases Use Rate per Acre (fl oz) Remarks
Fruiting Vegetables
(Crop Group 8-10)
African eggplant;
bush tomato;
bell pepper (field
and greenhouse);
cocona;
currant tomato;
eggplant;
garden huckleberry;
goji berry;
groundcherry;
martynia;
naranjilla;
okra;
pea eggplant;
Late Blight
(Phytophthora infestans)
Buckeye Rot
(Phytophthora parasitica)
Pepper Downy Mildew
(Peronospora tabacina)
2.0 - 4.8 fl oz Begin foliar applications prior
to disease development, and
continue on a 5- to 14-day
interval. Use the higher rates
when disease is present, for
longer application intervals, or
for susceptible varieties.
Phytophthora Blight
(Phytophthora capsici)
2.0 - 4.8 fl oz

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 18

pepino;
nonbell pepper (field and
greenhouse);
roselle;
scarlet eggplant;
sunberry;
tomatillo;
tomato (field and greenhouse);
tree tomato
Phytophthora Blight
(Phytophthora capsici)
4.8 - 38.6 fl oz Apply at plant, in furrow, drip
or in transplant water. See
specific Soil Application
Directions in this label.
 Restrictions
The minimum time from application to harvest (PHI) is 0 days. Do not follow soil applications of DuPont ZORVEC
ENICADE Zorvec Enicade or DuPont ZORVEC EPICALTRINZorvec Epicaltrin with foliar applications of Zorvec Enicade
ZORVEC ENICADE. Use either soil applications or foliar applications but not both for disease control. Do not make more
than four applications of product per crop by either method. Do not exceed six foliar applications of ZORVEC
ENICADEZorvec Enicade per acre per year for the same crop. Annual maximums for specific use patterns are listed below.

Foliar applications

Make no more than 2 sequential applications before rotating to a fungicide with a different mode of action. Do not use ZORVEC
ENICADEZorvec Enicade for more than 33% of the total foliar fungicide applications. The minimum spray interval for foliar
applications is 5 days. Do not exceed 19.2 fl oz ZORVEC ENICADEZorvec Enicade foliar use per acre per year.

For Late Blight, Buckeye Rot or Phytophthora foliar control on bell and non-bell peppers, and tomatoes in the
greenhouse:

Use ZORVEC ENICADEZorvec Enicade at a rate range of 0.07 - 0.167 fl oz of product (0.42 tsp - 1 tsp) per gallon of spray per
1518 sq ft for Late Blight or Buckeye Rot control.

Use a rate range of 0.07 - 0.167 fl oz of product (0.42 tsp - 1 tsp) per gallon of spray per 1518 sq ft for Phytophthora foliar control.

These rates equal the field rates of 2.0 - 4.8 fl oz/acre.

Soil applications

Make no more than 2 sequential applications before rotating to a fungicide with a different mode of action. Do not use Zorvec
Enicade ZORVEC ENICADE for more than 33% of the total soil fungicide applications. The minimum soil application interval is 7
days. Do not exceed 77.2 fl oz ZORVEC ENICADEZorvec Enicade soil use per acre per year.

Crop/Crop Group Target Diseases Use Rate per Acre (fl oz) Remarks
Ginseng* Phytophthora Root Rot
(Phytophthora cactorum)
4.8 - 38.6 fl oz Begin foliar applications prior
to disease development, and
continue on a 14-day interval,
using the higher rates for
heavy disease pressure
conditions and susceptible
varieties.
Restrictions
The minimum time from application to harvest (PHI) is 14 days. Do not exceed 77.2 fl oz of DuPont ZORVEC ENICADEZorvec
Enicade product per acre per year. Do not make more than 4 applications of product per year.
* Not for use in California on Ginseng

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 19


Crop/Crop Group Target Diseases Use Rate per Acre (fl oz) Remarks
Leafy Greens (Crop
Subgroup 4A)
Amaranth;
arugula;
chervil;
chrysanthemum, edible-
leaved; chrysanthemum,
garland;
corn salad;
cress, garden;
cress, upland;
dandelion;
dock;
endive;
lettuce, head and leaf;
orach;
parsley;
purslane, garden;
purslane, winter;
radicchio;
spinach;
spinach, New Zealand;
spinach, vine
Downy Mildew
(Bremia lactucae)
2.0 - 4.8 fl oz Begin foliar applications prior
to disease development, and
continue on a 3- to 14-day
interval. Use the higher rates
when disease is present, for
longer application intervals, or
for susceptible varieties.
Downy Mildew
(Peronospora farinosa)
2.4 - 4.8 Begin applications prior to
disease development, and
continue on a 3- to 10-day
interval. Use the higher rates
when disease is present, for
longer application intervals, or
for susceptible varieties.
Downy Mildew
(Bremia lactucae)
9.6 - 38.6 fl oz Apply at plant, in furrow, drip
or in transplant water. See
specific Soil Application
Directions in this label.
Restrictions
The minimum time from application to harvest (PHI) is 0 days. Do not follow soil applications of ZORVEC ENICADEZorvec
Enicade or DuPont ZORVEC EPICALTRINZorvec Epicaltrin with foliar applications of ZORVEC ENICADEZorvec Enicade.
Use either soil applications or foliar applications but not both for disease control. Do not make more than four
applications of product per crop by either method. Do not exceed six foliar applications of ZORVEC ENICADEZorvec
Enicade per acre per year for the same crop. Annual maximums for specific use patterns are listed below.

Foliar applications

Make no more than 2 sequential applications before rotating to a fungicide with a different mode of action. Do not use ZORVEC
ENICADEZorvec Enicade for more than 33% of the total foliar fungicide applications. The minimum spray interval for foliar
applications is 3 days. Do not exceed 19.2 fl oz ZORVEC ENICADEZorvec Enicade foliar use per acre per year.

Soil applications

Make no more than 2 sequential applications before rotating to a fungicide with a different mode of action. Do not use ZORVEC
ENICADEZorvec Enicade for more than 33% of the total soil fungicide applications. The minimum soil application interval is 7 days.
Do not exceed 77.2 fl oz ZORVEC ENICADEZorvec Enicade soil use per acre per year.

Crop/Crop Group Target Diseases Use Rate per Acre (fl oz) Remarks
Peas, Succulent Shelled and
Edible-Podded*
Pisum spp., includes dwarf
pea, edible-pod pea, snow pea,
sugar snap pea, English pea,
garden pea, green pea
Downy Mildew
(Peronospora viciae,
Phytophthora phaseoli)
2.4 - 4.8 fl oz Begin applications prior to
disease development, and
continue on a 5- to 7- day
interval. Use the higher rate
when disease is present, for
longer application intervals, or
for susceptible varieties.
Restrictions
Make no more than 2 sequential applications before rotating to a fungicide with a different mode of action. Do not use DuPont
ZORVEC ENICADEZorvec Enicade for more than 33% of the total foliar fungicide applications or make more than four applications
of product per crop, whichever is more restrictive. Do not exceed six foliar applications of ZORVEC ENICADEZorvec Enicade per
acre per year for the same crop. The minimum spray interval is 5 days. The minimum time from application to harvest (PHI) is 0
days. Do not exceed 19.2 fl oz of ZORVEC ENICADEZorvec Enicade product per acre per year.
* Not for use in California on succulent shelled and edible-podded peas

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 20


Crop/Crop Group Target Diseases Use Rate per Acre (fl oz) Remarks
Tuberous and Corm
Vegetables*
(Crop Subgroup 1C)
Potato;
Arracacha;
arrowroot;
artichoke, Chinese;
artichoke, Jerusalem;
canna, edible;
cassava, bitter and sweet;
chayote (root);
chufa;
dasheen (taro);
ginger;
leren;
sweet potato;
tanier;
turmeric;
yam bean;
yam, true
Late Blight
(Phytophthora infestans)
1.6 - 4.8 fl oz Begin applications prior to
disease development, and
continue on a 5- to 14-day
interval. Use the higher rates
when disease is present, for
longer application intervals, or
for susceptible varieties.
Pink Rot
(Phytophthora erythroseptica)
6.8 fl oz Apply at nickel-sized tubers
(flowering) followed with a
second application after 10-
14 days.
 Restrictions
Make no more than 2 sequential applications before rotating to a fungicide with a different mode of action. Do not use ZORVEC
ENICADEZorvec Enicade for more than 33% of the total foliar fungicide applications or make more than four applications of product
per crop, whichever is more restrictive. Do not exceed six foliar applications of ZORVEC ENICADEZorvec Enicade per acre per
year for the same crop. The minimum spray interval is 5 days. The minimum time from application to harvest (PHI) is 5 days. Do
not exceed 27.2 fl oz of ZORVEC ENICADEZorvec Enicade product per acre per year.
* Not for use in California on Tuberous and Corm Vegetables

Crop/Crop Group Target Diseases Use Rate per Acre (fl oz) Remarks
Tobacco* Blue Mold
(Peronospora tabacina)
2.0 - 4.8 fl oz Begin applications prior to
disease development, and
continue on a 7- to 10-day
interval. Use the higher rates
when disease is present, for
longer application intervals, or
for susceptible varieties.
Black Shank
(Phytophthora parasitica var.
nicotianae)
4.8 fl oz Apply as a foliar spray to the
tobacco transplants in the
transplant tray 24-48 hours
prior to transplanting.
Immediately water the spray
off the foliage into the
transplant tray soil, not
watering past soil saturation.
Wait 24 hours to transplant.
See specific Tray Transplant
Directions in this label for
further details.
Black Shank
(Phytophthora parasitica var.
nicotianae)
9.6 - 38.6 fl oz Apply at plant in furrow, or in
transplant water. See specific
Soil Application Directions in
this label
Black Shank
(Phytophthora parasitica var.
nicotianae)
9.6 - 38.6 fl oz Apply soil directed or banded
applications at 1st cultivation
and layby. See specific Soil
Application Directions in this
label

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 21

Restrictions
The minimum time from application to harvest (PHI) is 7 days. Do not follow soil applications of DuPont ZORVEC
ENICADE Zorvec Enicade or DuPont ZORVEC EPICALTRINZorvec Epicaltrin with foliar applications of ZORVEC ENICADE.
Zorvec Enicade. Use either soil applications or foliar applications but not both for disease control. Do not make more
than four applications of product per crop by either method. Do not exceed six foliar applications of ZORVEC
ENICADEZorvec Enicade per acre per year for the same crop. Annual maximums for specific use patterns are listed below.

Foliar applications

Make no more than 2 sequential applications before rotating to a fungicide with a different mode of action. Do not use Zorvec
Enicade ZORVEC ENICADE for more than 33% of the total foliar fungicide applications. The minimum spray interval for foliar
applications is 7 days. Do not exceed 19.2 fl oz ZORVEC ENICADEZorvec Enicade foliar use per acre per year.

Soil or soil-directed applications (includes Transplant Tray application)

Make no more than 2 sequential applications before rotating to a fungicide with a different mode of action. The minimum soil
application interval is 7 days. Do not exceed 77.2 fl oz ZORVEC ENICADEZorvec Enicade soil use per acre per year.
* Not for use in California on Tobacco

Chemigation

Apply DuPont ZORVEC ENICADEZorvec Enicade only through drip (trickle) or strip tubing irrigation
systems and sprinkler irrigation systems (such as center pivot, lateral move, end tow, side (wheel) roll,
traveler, big gun, solid set or hand move irrigation systems). Crop injury, lack of effectiven ess, or illegal
pesticide residues in the crop can result from non-uniform distribution of treated water. If you have
questions about calibration, you should contact State Extension Service Specialists, equipment
manufacturers or other experts.

Do not connect any irrigation system (including greenhouse systems) used for pesticide applications to a
public water system unless the pesticide label-prescribed safety devices for public water systems are in
place. Public water system means a system for the provision to the public of piped water for human
consumption, if such system has at least 15 service connections or regularly serves an average of at
least 25 individuals at least 60 days out of the year.

A person knowledgeable of the chemigation system and responsible for its operation, or under the
supervision of the responsible person, shall shut the system down and make necessary adjustments
should the need arise.

See "Required System Safety Devices and Instructions for all Chemigation and Public Water Sy stems" at
the end of the Chemigation section.

APPLICATION INSTRUCTIONS
DRIP (TRICKLE)

ZORVEC ENICADEZorvec Enicade must be applied in a manner that ensures the product is in the root
zone. Zorvec EnicadeZORVEC ENICADE must be in the root zone to provide effective control of target
pests.

ZORVEC ENICADEZorvec Enicade is most effective when it is applied so that the roots are at or near the
site of application; manage irrigation so that significant quantities of ZORVEC ENICADEZorvec Enicade
remain in the root zone.

1. Do not begin applications until after crop emergence in direct seeded crops.
2. Do not make applications if soil moisture is below the level required for active plant growth.
3. This product must be applied uniformly in the root zone or poor performance may result. Drip tape or
emitters must be located within or directly adjacent to the root zone.
4. The drip system must be properly designed, free of leaks, and operated in a manner that provides
uniform application of water throughout the field.

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 22

5. In most situations, this product should be applied during the first 1/3 of the irrigation cycle, starting just
after the system has come up to pressure.
6. The minimum injection period is the time that it takes water to move from the injection point to the
furthest emitter in the irrigation zone (propagation time). If this time is not known, it can be calculated
by measuring the time for a soluble dye to move from the injection point to the farthest emitter. A
longer injection improves uniformity throughout the zone, but needs to allow for at least an equal
period of water to flush the system and move the product through the soil.
7. ZORVEC ENICADEZorvec Enicade must not be applied at the same time that a drip irrigation line
clean out product is being used as performance may be reduced.

Directions for Chemigation:
Preparation

A pesticide tank is recommended for the application of ZORVEC ENICADEZorvec Enicade in drip
chemigation systems. Thoroughly clean the injection system and tank of any fertilizer or chemical
residues using a standard clean-out procedure. Dispose of any residues in accordance with State and
Federal laws. With the mix tank 1/4 to 1/2 full with water and the agitator running, measure the required
amount of Zorvec EnicadeZORVEC ENICADE and add it to the tank. Then add additional water to bring
your total pesticide mixture up to the desired volume for your application. Note: Always add the ZORVEC
ENICADEZorvec Enicade to water, never put ZORVEC ENICADE Zorvec Enicade into a dry tank or other
mixing equipment without first adding water. See "Tank Mixing Sequence" section of the container label
for tank mixing sequence. Continue to agitate the mixture throughout the application process. Use
mechanical or hydraulic agitation; do not use air agitation.

Injection into Chemigation Systems

Inject the proper amount of DuPont ZORVEC ENICADEZorvec Enicade into the irrigation water flow using
a positive displacement injection pump or a Venturi injector. Injection should occur at a point in the main
irrigation water flow to ensure thorough mixing with the irrigation water.

Uniform Water Distribution

The irrigation system used for application of ZORVEC ENICADEZorvec Enicade must provide for uniform
distribution of ZORVEC ENICADEZorvec Enicade treated water. Non-uniform distribution can result in
crop injury, lack of effectiveness or illegal pesticide residues in or on the crop being treated. Ensure the
drip chemigation system is operating properly to uniformly distribute the chemigation application to the
crop. Contact the equipment manufacturer, the local University Extension agent or other experts if you
have questions about achieving uniform distribution of the application.

Monitoring of Chemigation Applications

A person knowledgeable of the chemigation system and responsible for its operation, or under the
supervision of a responsible person, shall shut the system down and make necessary adjustments should
the need arise. Wear the personal protective equipment as defined in the PPE section of the label for
applicators and other handlers when making adjustments or repairs on the chemigation system when
ZORVEC ENICADEZorvec Enicade is in the irrigation water.

Operation

Start the water pump and let the system achieve the desired pressure before starting the injector. Start
the injector. When the application is finished, allow the entire irrigation and injec tor system to be
thoroughly flushed clean before stopping the system.

Cleaning the System

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 23


Thoroughly clean the injection system and tank of any fertilizer or chemical residues using a standard
clean-out procedure. Dispose of any residues in accordance with State and Federal laws. Consult your
owner’s manual or your local equipment dealer for cleanout procedures for your injection system.

Required System Safety Devices and Instructions for all Chemigation and Public Water Systems:

1. Public water system means a system for the provision to the public of piped water for human
consumption if such system has at least 15 service connections or regularly serves an average of at
least 25 individuals daily at least 60 days out of the year.
2. Chemigation systems connected to public water systems must contain a functional, reduced-
pressure zone, backflow preventer (RPZ) or the functional equivalent in the water supply line
upstream from the point of pesticide introduction. As an option to the RPZ, the water fro m the public
water system should be discharged into a reservoir tank prior to pesticide introduction. There shall
be a complete physical break (air gap) between the outlet end of the fill pipe and the top or overflow
rim of the reservoir tank of at least twice the inside diameter of the fill pipe.
3. The pesticide injection pipeline must contain a functional, automatic, quick-closing check valve to
prevent the flow of fluid back toward the injection pump.
4. The pesticide injection pipeline must contain a functional, normally closed, solenoid-operated valve
located on the intake side of the injection pump and connected to the system interlock to prevent
fluid from being withdrawn from the supply tank when the irrigation system is either automatically or
manually shut down.
5. The system must contain functional interlocking controls to automatically shut off the pesticide
injection pump when the water pump motor stops, or in cases where there is no water pump, when
the water pressure decreases to the point where pesticide distribution is adversely affected.
6. Systems must use a metering device, such as a positive displacement injection pump (e.g.,
diaphragm pump) effectively designed and constructed of materials that are compatible with
pesticides and capable of being fitted with a system interlock.
7. The system must contain a functional check valve, vacuum relief valve and low-pressure drain
appropriately located on the irrigation pipeline to prevent water source contamination from backflow.
8. Good agitation is required in the injection tank.
9. In moving systems, apply specified dosage of DuPont ZORVEC ENICADEZorvec Enicade fungicide
as a continuous injection. In nonmoving systems inject ZORVEC ENICADEZorvec Enicade for 15 to
30 minutes at end of cycle. Use the least amount of water possible consistent with uniform coverage.
10. Mix the amount of ZORVEC ENICADEZorvec Enicade needed for acreage to be treated into the
quantity of water determined during prior calibration. For moving systems inject into the system
continuously for one complete revolution of the field. For nonmoving systems inject into system for
the time established during calibration.
11. Stop injection equipment after treatment is completed and continue to operate irrigation equipment
until all ZORVEC ENICADEZorvec Enicade is flushed from system.

SPRAY TANK CLEANOUT

Prior to application, start with clean, well maintained application equipment. Immediately following
application, thoroughly clean all spray equipment to reduce the risk of forming hardened deposits which
might become difficult to remove.

Drain application equipment. Thoroughly rinse and flush all application equipment with clean water.

Take all necessary safety precautions when cleaning equipment. Do not clean near wells, water sources
or desirable vegetation. Dispose of waste rinse water in accordance with local regulations.

SPRAY DRIFT MANAGEMENT

The interaction of many equipment and weather-related factors determines the potential for spray drift.

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 24

The applicator is responsible for considering all these factors when making application decisions.

Avoiding spray drift is the responsibility of the applicator.

IMPORTANCE OF DROPLET SIZE

The most effective drift management strategy is to apply the largest droplets which are consistent with
pest control objectives. The presence of sensitive species nearby, the environmental conditions, and pest
pressure may affect how an applicator balances drift control and coverage. Applying larger drople ts
reduces drift potential, but will not prevent drift if applications are made improperly or under unfavorable
environmental conditions.

A droplet size classification system describes the range of droplet sizes produced by spray nozzles. The
American Society of Agricultural and Biological Engineers (ASABE) provide a Standard that describes
droplet size spectrum categories defined by a number of reference nozzles (fine, coarse, etc.). Droplet
spectra resulting from the use of a specific nozzle may also be described in terms of volume mean
diameter (VMD). Coarser droplet size spectra have larger VMD’s and lower drift potential.

CONTROLLING DROPLET SIZE - GROUND APPLICATION

• Nozzle Type - Select a nozzle type that is designed for the intended application. With most nozzle
types, narrower spray angles produce larger droplets. The use of low-drift nozzles will reduce drift
potential.
• Pressure - The lowest spray pressures recommended for the nozzle produce the largest droplets.
Higher pressure reduces droplet size and does not improve canopy penetration. When higher flow
rates are needed, using a higher-capacity nozzle instead of increasing pressure results in the
coarsest droplet spectrum.
• Flow Rate/Orifice Size - Using the highest flow rate nozzles (largest orifice) that are consistent with
pest control objectives reduces the potential for spray drift. Nozzles with higher rated flows produce
coarser droplet spectra.

CONTROLLING DROPLET SIZE – AIRCRAFT

• Nozzle Type - Solid stream, or other low drift nozzles produce the coarsest droplet spectra.
• Number of Nozzles - Using the minimum number of nozzles with the highest flow rate that provide
uniform coverage will produce a coarser droplet spectrum.
• Nozzle Orientation - Orienting nozzles in a manner that minimizes the effects of air shear will
produce the coarsest droplet spectra. For some nozzles such as solid stream, pointing the nozzles
straight back parallel to the airstream will produce a coarser droplet spectrum th an other orientations.
• Pressure – Selecting the pressure that produces the coarsest droplet spectrum for a particular nozzle
and airspeed reduces spray drift potential. For some nozzle types such as solid streams, lower
pressures can produce finer droplet spectra and increase drift potential.

BOOM LENGTH (AIRCRAFT), AND APPLICATION HEIGHT

• Boom Length (aircraft) - Using shorter booms decreases drift potential. Boom lengths are
expressed as a percentage of an aircraft’s wingspan or a helicopter’s rotor blad e diameter. Shorter
boom length and proper positioning can minimize drift caused by wingtip or rotor vortices.
• Application Height (aircraft) - Applications made at the lowest height that are consistent with pest
control objectives and the safe operation of the aircraft will reduce the potential for spray drift.
• Application Height (ground) - Applications made at the lowest height consistent with pest control
objectives, and that allow the applicator to keep the boom level with the application site and minimi ze
bounce, will reduce the exposure of spray droplets to evaporation and wind, and reduce spray drift
potential.

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 25


WIND

Drift potential is lowest when applications are made in light to gentle sustained winds (2 -10 mph), which
are blowing in a constant direction. Many factors, including droplet size and equipment type also
determine drift potential at any given wind speed. AVOID GUSTY OR WINDLESS CONDITIONS. Local
terrain can also influence wind patterns. Every applicator is expected to be famil iar with local wind
patterns and how they affect spray drift.

TEMPERATURE AND HUMIDITY

Setting up equipment to produce larger droplets to compensate for droplet evaporation can reduce spray
drift potential. Droplet evaporation is most severe when conditions are both hot and dry.

SURFACE TEMPERATURE INVERSIONS

Drift potential is high during a surface temperature inversion. Surface inversions restrict vertical air mixing,
which may cause small suspended droplets to remain close to the ground and move late rally in a
concentrated cloud. Surface inversions are characterized by increasing temperature with altitude and are
common on nights with limited cloud cover and light to no wind. They begin to form as the sun sets and
often continue into the morning. Mist or fog may indicate the presence of an inversion in humid areas.
Inversions may also be identified by producing smoke and observing its behavior. Smoke that remains
close to the ground, or moves laterally in a concentrated cloud under low wind conditions indicates a
surface inversion. Smoke that moves upward and rapidly dissipates indicates good vertical air mixing.

SHIELDED SPRAYERS

Shielding the boom or individual nozzles can reduce the effects of wind. However, it is the responsibility
of the applicator to verify that the shields are minimizing drift potential, and not interfering with uniform
deposition of the product.

AIR ASSISTED (AIR BLAST) FIELD CROP SPRAYERS

Air assisted field crop sprayers carry droplets to the target via a downward directed air stream. Some may
reduce the potential for drift, but if a sprayer is unsuitable for the application and/or set up improperly,
high drift potential can result. It is the responsibility of the applicator to determine that a sprayer is suitable
for the intended application, that it is configured properly, and that drift potential has been minimized.

Note: Air assisted field sprayers can affect product performance by affecting spray coverage and canopy
penetration. Read the specific crop use and application equipment instructions to determine if an air
assisted field crop sprayer can be used.

SENSITIVE AREAS

This pesticide should only be applied when the potential for drift to adjacent sensitive areas (e.g.,
residential areas, bodies of water, known habitat for threatened or endangered species, non-target crops)
is minimal (e.g., when wind is blowing away from the sensitive areas).

DRIFT CONTROL ADDITIVES

Using product compatible drift control additives can reduce drift potential. When a drift control ad ditive is
used, read and carefully observe cautionary statements and all other information on the additive’s label. If
using an additive that increases viscosity, ensure that the nozzles and other application equipment will
function properly with a viscous spray solution. Preferred drift control additives have been certified by the

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 26

Council of Producers and Distributors of Agrotechnology.

STORAGE AND DISPOSAL
Do not contaminate water, food, or feed by storage and disposal.

PESTICIDE STORAGE: Keep container closed when not in use. Always store pesticides in the original
container only, away from other pesticides, food, pet food, feed, seed, fertilizers, and veterinary
supplies. If a leaky container must be contained within another, mark the outer container to identify the
contents. Storage areas must be locked and secure from vandalism, with precautionary signs posted.
The storage area must be dry, well-lit, and well- ventilated. Keep pesticide storage areas clean. Clean
up any spills promptly. Protect pesticide containers from extreme heat and cold. Store herbicides,
insecticides and fungicides in separate areas within the storage unit. Place liquid formulations on lower
shelves and dry formulations above. Maintaining a spill kit and fire extinguisher on hand and having
emergency phone numbers posted will allow you to be prepared for emergencies. If spill cleanup PPE
is stored nearby, but outside the pesticide storage area, it will be accessible when needed.

PESTICIDE DISPOSAL: Wastes resulting from the use of this product must be disposed of on site or
at an approved waste disposal facility.

CONTAINER HANDLING: Refer to the Net Contents section of this product’s labeling for the
applicable “Nonrefillable Container” or “Refillable Container” designation.

Nonrefillable Rigid Plastic and Metal Containers (Capacity Equal to or Less Than 5 Gallons):
Nonrefillable container. Do not reuse or refill this container. Triple rinse container (or equivalent)
promptly after emptying. Triple rinse as follows: Empty the remaining contents into application
equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full
with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or
store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this
procedure two more times. Then, for Plastic Containers, offer for recycling if available or puncture and
dispose of in a sanitary landfill, or by incineration. Do not burn, unless allowed by state and local
ordinances. For Metal Containers, offer for recycling if available or reconditioning if appropriate, or
puncture and dispose of in a sanitary landfill, or by other procedures approved by state and lo cal
authorities.

Nonrefillable Rigid Plastic and Metal Containers (Capacity Greater Than 5 Gallons): Nonrefillable
container. Do not reuse or refill this container. Triple rinse container (or equivalent) promptly after
emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix
tank. Fill the container 1/4 full with water. Replace and tighten closures. Tip container on its side and
roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Sta nd the container on
its end and tip it back and forth several times. Turn the container over onto its other end and tip it back
and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for
later use or disposal. Repeat this procedure two more times. Then, for Plastic Containers, offer for
recycling if available or puncture and dispose of in a sanitary landfill, or by incineration. Do not burn,
unless allowed by state and local ordinances. For Metal Containers, offer for recycling if available or
reconditioning if appropriate, or puncture and dispose of in a sanitary landfill, or by other procedures
approved by state and local authorities.

Nonrefillable Rigid Plastic and Metal Containers, e.g., Intermediate Bulk Co ntainers [IBC] (Size
or Shape Too Large to be Tipped, Rolled or Turned Upside Down): Nonrefillable container. Do not
reuse or refill this container. Clean container promptly after emptying the contents from this container
into application equipment or mix tank and before final disposal using the following pressure rinsing
procedure. Insert a lance fitted with a suitable tank cleaning nozzle into the container and ensure that
the water spray thoroughly covers the top, bottom and all sides inside the containe r. The nozzle
manufacturer generally provides instructions for the appropriate spray pressure, spray duration and/or
spray volume. If the manufacturer’s instructions are not available, pressure rinse the container for at
least 60 seconds using a minimum pressure of 30 PSI with a minimum rinse volume of 10% of the

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 27

container volume. Drain, pour or pump rinsate into application equipment or rinsate collection system.
Repeat this pressure rinsing procedure two more times. Then, for Plastic Containers, offer for recycling
if available or puncture and dispose of in a sanitary landfill, or by incineration. For Metal Containers,
offer for recycling if available or reconditioning if appropriate, or puncture and dispose of in a sanitary
landfill, or by other procedures approved by state and local authorities.

All Refillable Containers: Refillable container. Refilling Container: Refill this container with DuPont
ZORVEC ENICADE fungicide containing oxathiapiprolin only. Do not reuse this container for any other
purpose. Cleaning before refilling is the responsibility of the refiller. Prior to refilling, inspect carefully for
damage such as cracks, punctures, abrasions, worn out threads and closure devices. If damage is
found, do not use container; contact DuPont at the number below for instructions. Check for leaks after
refilling and before transporting. If leaks are found, do not reuse or transport container; contact DuPont
at the number below for instructions. Disposing of Container: Do not reuse this container for any other
purpose other than refilling (see preceding). Cleaning the container before final disposal is the
responsibility of the person disposing of the container. To clean the container before final disposal, use
the following pressure rinsing procedure. Insert a lance fitted with a suitable tank cleaning nozzle into
the container and ensure that the water spray thoroughly covers the top, bottom and all sides inside the
container. The nozzle manufacturer generally provides instructions for the appropriate spray pressure,
spray duration and/or spray volume. If the manufacturer’s instructions are not available, pressure rinse
the container for at least 60 seconds using a minimum pressure of 30 PSI with a minimum rinse
volume of 10% of the container volume. Drain, pour or pump rinsate into application equipment or
rinsate collection system. Repeat this pressure rinsing procedure two more times. Then, for Plastic
Containers, offer for recycling if available or puncture and dispose of in a sanitary landfill, or by
incineration. Do not burn, unless allowed by state and local ordinances. For Metal Containers, offer for
recycling if available or reconditioning if appropriate, or puncture and dispose of in a sanitary landfill,
or by other procedures approved by state and local authorities.

Do not transport if container is damaged or leaking. If the container is damaged, leaking or obsolete, or
in the event of a major spill, fire or other emergency, contact DuPont at 1-800-441-3637, day or night.


NOTICE TO BUYER--Purchase of this material does not confer any rights under patents of countries
outside of the United States.

The DuPont Oval Logo, DuPont™, ZORVEC and ENICADE are trademarks or registered trademarks of
E. I. du Pont de Nemours and Company.

SL - 2045 040417 08-14-17


 Terms and Conditions of Use
If terms of the following Warranty Disclaimer, Inherent Risks of Use, and Limitation of Remedies are not
acceptable, return unopened package at once to the seller for a full refund of purchase price paid. To the
extent permitted by law, use by the buyer or any other user constitutes acceptance of the terms under
Warranty Disclaimer, Inherent Risks of Use and Limitations of Remedies.

 Warranty Disclaimer
Corteva Agriscience warrants that this product conforms to the chemical description on the label and is
reasonably fit for the purposes stated on the label when used in strict accordance with the directions,
subject to the inherent risks set forth below. To the extent permitted by law, Corteva Agriscience MAKES
NO OTHER EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE OR ANY OTHER EXPRESS OR IMPLIED WARRANTY.

 Inherent Risks of Use
It is impossible to eliminate all risks associated with use of this product. Plant injury, lack of performance,

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 28

or other unintended consequences may result because of such factors as use of the product contrary to
label instructions (including conditions noted on the label, such as unfavorable temperatures, soil
conditions, etc.), abnormal conditions (such as excessive rainfall, drought, tornadoes, hurricanes),
presence of other materials, the manner of application or other factors, all of which are beyond the control
of Corteva Agriscience or the seller. Corteva Agriscience will not be responsible for losses or damages
resulting from the use of this product in any manner not specifically directed by Cor teva Agriscience. To
the extent permitted by law, all such risks associated with non-directed use shall be assumed by buyer
and/or user.

 Limitation of Remedies
To the extent permitted by law, the exclusive remedy for losses or damages resulting from this product
(including claims based on contract, negligence, tort, strict liability, or other legal theories), shall be limited
to, at Corteva Agriscience’s election, one of the following:

1. Refund of purchase price paid by buyer or user for product bought, or
2. Replacement of product used.

To the extent permitted by law, Corteva Agriscience shall not be liable for losses or damages resulting
from handling or use of this product unless Corteva Agriscience is promptly notified of such loss or
damage in writing. To the extent permitted by law, in no case shall Corteva Agriscience be liable for
consequential, incidental or special damages or losses.

The terms of the Warranty Disclaimer, Inherent Risks of Use, and Limitation of Remedies cannot be
varied by any written or verbal statements or agreements. No employee or sales agent of Corteva
Agriscience or the seller is authorized to vary or exceed the terms of the Warranty Disclaimer or this
Limitation of Remedies in any manner.


™® Trademarks of Corteva Agriscience and its affiliated companies

LIMITATION OF WARRANTY AND LIABILITY

NOTICE: Read this Limitation of Warranty and Liability before buying or using this Product. DuPont will
not be responsible for losses or damages resulting from the use of this product in any manner not
specifically directed by DuPont. User assumes all risks associated with such non-directed use. If the
Terms are not acceptable, return the product at once, unopened, and the purchase price will be refunded.

It is impossible to eliminate all risks associated with the use of this product. Such risks arise from weathe r
conditions, soil factors, off target movement, unconventional farming techniques, presence of other
materials, the manner of use or application, or other unknown factors, all of which are beyond the control
of DuPont. These risks can cause: ineffectiveness of the product, crop injury, or injury to non-target crops
or plants. WHEN YOU BUY OR USE THIS PRODUCT, YOU AGREE TO ACCEPT THESE RISKS.

DuPont warrants that this product conforms to the chemical description on the label thereof and is
reasonably fit for the purpose stated in the Directions for Use, subject to the inherent risks described
above, when used in accordance with the Directions for Use under normal conditions.

TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, DUPONT MAKES NO OTHER EXPRESS
OR IMPLIED WARRANTY OF FITNESS OR OF MERCHANTABILITY OR ANY OTHER EXPRESS OR
IMPLIED WARRANTY. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, IN NO EVENT
SHALL DUPONT OR SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL
DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT. BUYER'S OR USER'S
BARGAINED-FOR EXPECTATION IS CROP PROTECTION. TO THE EXTENT CONSISTENT WITH
APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER OR BUYER AND THE EXCLUSIVE
LIABILITY OF DUPONT OR SELLER, FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES

Oxathiapiprolin / Zorvec Enicade / MSTR / Notif With Edits / 10-20-22 Page 29

(INCLUDING CLAIMS BASED ON BREACH OF WARRANTY OR CONTRACT, NEGLIGENCE, TORT
OR STRICT LIABILITY), WHETHER FROM FAILURE TO PERFORM OR INJURY TO CROPS OR
OTHER PLANTS, AND RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SHALL B E
THE RETURN OF THE PURCHASE PRICE OF THE PRODUCT, OR AT THE ELECTION OF DUPONT
OR SELLER, THE REPLACEMENT OF THE PRODUCT.

To the extent consistent with applicable law that allows such requirement, DuPont or its Ag Retailer must
have prompt notice of any claim so that an immediate inspection of buyer's or user's growing crops can
be made. Buyer and all users shall promptly notify DuPont or a DuPont Ag Retailer of any claims,
whether based on contract, negligence, strict liability, other tort or otherwise, or be barred from any
remedy.

This Limitation of Warranty and Liability may not be amended by any oral or written agreement.

®™ Trademarks of Dow AgroSciences, DuPont or Pioneer and their affiliated companies or respective owners

For product information call: 1-888-6-DUPONT [1-888-638-7668]
Internet address: http://cropprotection.dupont.com/
© 2015-2017 E. I. du Pont de Nemours and Company, Chestnut Run Plaza, 974 Centre Road,
Wilmington, DE 19805 U.S.A.
All rights reserved.

EPA accepted 08/14/17