crop-chem-docs/corpus/epa_ppls/7969-289.md

# HEADLINE SC FUNGICIDE

- EPA Reg No: **7969-289**
- Registrant: BASF AGRICULTURAL SOLUTIONS US, LLC
- Signal word: Warning
- Active ingredients: Pyraclostrobin (23.3%)
- Label accepted: 2026-02-23
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/007969-00289-20260223.pdf

---
February 19, 2026
Quinn Peacock
Regulatory Affairs Manager
BASF Agricultural Solutions
US LLC, 26 Davis Drive
North Carolina 27713-2839
Subject: Label Amendment - Registratio n Review Mitigation for Pyraclostrobin
 Product Name: Headline SC Fungicide
 EPA Registration Number: 7969-289
Case Number: 476563
Application Dates: 12/7/2020
Dear Quinn Peacock:
The Agency, in accordance with the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA),
as amended, has completed reviewing all the information submitted with your application to
support the Registration Review of the above referenced product in connection with the
Pyraclostrobin Interim Decision, and has concluded that your submission is acceptable. The
label referred to above, submitted in connection with registration under FIFRA, as amended, is
acceptable.
Should you wish to add/retain a reference to the company’s website on your label, then please
be aware that the website becomes labeling under the Federal Insecticide, Fungicide, and
Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the
product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E).
40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In
addition, regardless of whether a website is referenced on your product’s label, claims made on
the website may not substantially differ from those claims approved through the registration
process. Therefore, should the Agency find or if it is brought to our attention that a website
contains false or misleading statements or claims substantially differing from the EPA approved
registration, the website will be referred to the EPA’s Office of Enforcement and Compliance
Assurance.
A stamped copy of your labeling is enclosed for your records. This labeling supersedes
all previously accepted labeling and must be used at your next label printing. You must
submit one copy of the final printed labeling before you release the product for

Page 2 of 2
EPA Reg. No. 7969-289
Case No. 476563

shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may
distribute or sell this product under the previously approved labeling for 12 months
from the date of this letter. After 12 months, you may only distribute or sell this
product if it bears this new revised labeling or subsequently approved labeling. “To
distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation
at 40 CFR 152.3.

If you have any questions about this letter, please contact Tiffany Green by phone at 919-541-
2446, or via email at green.tiffany@epa.gov.

 Sincerely,


Kevin Costello, Branch Chief
Risk Management and Implementation Branch 2
Pesticide Re-Evaluation Division
Office of Pesticide Programs


ENCLOSURE: Stamped label

Pyraclostrobin Group 11 Fungicide
For use in disease control and plant health in the following crops:
alfalfa, barley, citrus fruits, corn (all types), cotton, dried shelled
peas and beans, edible-podded legume vegetables, grass grown
for seed, mint, oats, oilseed crops, peanut, pecan, rye, sorghum,
soybean, succulent shelled peas and beans, sugar beet,
sugarcane, tuberous and corm vegetables (includes potato), and
wheat and triticale
Active Ingredient*:
pyraclostrobin: (carbamic acid, [2-[[[1-(4-chlorophenyl)-1H-pyrazol-3-
yl]oxy]methyl]phenyl]methoxy-, methyl ester) ........................... 23.3%
Other Ingredients:.............................................. 76.7%
Total: ........................................................ 100.0%
* Equivalent to 2.08 pounds of pyraclostrobin per gallon
EPA Reg. No. 7969-289 EPA Est. No.
U.S. Patent No. 7,816,392
KEEP OUT OF REACH OF CHILDREN
WARNING/AVISO
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en
detalle. (If you do not understand this label, ﬁnd someone to explain it to you in detail.)
See full label for complete First Aid, Precautionary Statements, Directions For Use,
Conditions of Sale and Warranty, and state-speciﬁc crop and/or use site restrictions.
In case of an emergency endangering life or property involving this product,
call day or night 1-800-832-HELP (4357).
Net Contents:
BASF Agricultural Solutions US LLC
2 TW Alexander Drive
Research Triangle Park, NC 27713
Feb 19, 2026
7969-289

2
Precautionary Statements
Hazards to Humans and Domestic Animals
WARNING. May be fatal if swallowed. Causes moderate
eye irritation. Avoid contact with eyes, skin or clothing.
This pesticide is toxic to mammals.
Personal Protective Equipment (PPE)
Applicators and other handlers must wear:
• Long-sleeved shirt and long pants
• Protective eyewear (goggles, face shield, or safety
glasses)
• Shoes plus socks
• Chemical-resistant gloves made of waterproof material
(barrier laminate, butyl rubber ≥ 14 mils, natural rubber
≥ 14 mils, neoprene rubber ≥ 14 mils, nitrile rubber
≥ 14 mils, polyethylene, polyvinyl chloride (PVC)
≥ 14 mils, or Viton ≥ 14 mils)
• Chemical-resistant headgear for overhead exposure
• Chemical-resistant apron when cleaning equipment,
mixing, and loading
Follow the manufacturer’s instructions for cleaning and
maintaining PPE. If no such instructions for washables
exist, use detergent and hot water. Keep and wash PPE
separately from other laundry.
Engineering Controls Statement
When handlers use closed systems, enclosed cabs, or air-
craft in a manner that meets the requirements listed in the
Worker Protection Standard (WPS) for agricultural pesti-
cides [40 CFR 170.240(d)(4-6)], the handler PPE
requirements may be reduced or modiﬁed as speciﬁed in
the WPS.
USER SAFETY RECOMMENDATIONS
Users should:
• Wash hands before eating, drinking, chewing gum,
using tobacco, or using the toilet.
• Remove clothing/PPE immediately if pesticide gets
inside. Then wash thoroughly and put on clean
clothing.
• Remove PPE immediately after handling this product.
Wash the outside of gloves before removing. As soon
as possible, wash thoroughly and change into clean
clothing.
Environmental Hazards
This product may contaminate water through drift of spray
in wind.
This pesticide is toxic to ﬁsh and aquatic invertebrates.
Drift and runoff may be hazardous to aquatic organisms in
water adjacent to treated areas.
DO NOT apply directly to water, areas where surface
water is present, or intertidal areas below the mean high
water mark. DO NOT contaminate water when disposing
of equipment washwaters or rinsate.
Groundwater Advisory
This chemical has properties and characteristics associat-
ed with chemicals detected in groundwater. Pyraclostrobin
is known to leach through soil into groundwater under cer-
tain conditions as a result of label use. This chemical may
leach into groundwater if used in areas where soils are
permeable, particularly where the water table is shallow.
FIRST AID
If swallowed
• Call a poison control center or doctor immediately for treatment advice.
• Have person sip a glass of water if able to swallow.
• DO NOT induce vomiting unless told to do so by a poison control center or doctor.
• DO NOT give anything to an unconscious person.
If on skin
• Take off contaminated clothing.
• Rinse skin immediately with plenty of water for 15 to 20 minutes.
• Call a poison control center or doctor for treatment advice.
If in eyes
• Hold eye open and rinse slowly and gently with water for 15 to 20 minutes.
• Remove contact lenses, if present, after ﬁrst 5 minutes; then continue rinsing.
• Call a poison control center or doctor for treatment advice.
If inhaled
• Move person to fresh air.
• If person is not breathing, call 911 or an ambulance; then give artiﬁcial respiration, prefer-
ably by mouth to mouth, if possible.
• Call a poison control center or doctor for further treatment advice.
HOTLINE NUMBER
Have the product container or label with you when calling a poison control center or doctor or going for treatment.
You may also contact BASF Agricultural Solutions US LLC (hereafter “BASF”) for emergency medical treatment infor-
mation: 1-800-832-HELP (4357).

3
Surface Water Advisory
This product may impact surface water quality due to run-
off of rain water. This is especially true for poorly draining
soils and soils with shallow ground water. This product is
classiﬁed as having high potential for reaching surface
water via runoff for several months or more after applica-
tion. A level, well-maintained vegetative buffer strip
between areas to which this product is applied and sur-
face water features including ponds, streams, and springs
will reduce the potential loading of pyraclostrobin from run-
off water and sediment. Runoff of this product will be
reduced by avoiding applications when rainfall or irrigation
is expected to occur within 48 hours. Sound erosion con-
trol practices will reduce this product’s contribution to
surface water contamination.
Directions For Use
It is a violation of federal law to use this product in a man-
ner inconsistent with its labeling. DO NOT apply this
product in a way that will contact workers or other per-
sons, either directly or through drift. Only protected
handlers may be in the area during application. For any
requirements speciﬁc to your state or tribe, consult the
agency responsible for pesticide regulation.
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and
with the Worker Protection Standard (WPS), 40 CFR part
170. This standard contains requirements for the protec-
tion of agricultural workers on farms, forests, nurseries,
and greenhouses, and handlers of agricultural pesti-
cides. It contains requirements for training, decon
tamination, notiﬁcation, and emergency assistance. It
also contains speciﬁc instructions and exceptions per-
taining to the statements on this label about personal
protective equipment (PPE), notiﬁcation to workers, and
restricted-entry interval. The requirements in this box
only apply to uses of this product that are covered by
the Worker Protection Standard.
DO NOT enter or allow worker entry into treated areas
during the restricted-entry interval (REI) of 12 hours.
PPE required for early entry to treated areas that is per-
mitted under the Worker Protection Standard and that
involves contact with anything that has been treated,
such as plants, soil, or water, is:
• Coveralls
• Chemical-resistant gloves made of waterproof material
(barrier laminate, butyl rubber ≥ 14 mils, natural rubber
≥ 14 mils, neoprene rubber ≥ 14 mils, nitrile rubber
≥ 14 mils, polyethylene, polyvinyl chloride (PVC)
≥ 14 mils, or Viton ≥ 14 mils)
• Shoes plus socks
• Protective eyewear (goggles, face shield, or safety
glasses)
STORAGE AND DISPOSAL
DO NOT contaminate water, food, or feed by storage or
disposal.
Pesticide Storage
Store in original containers only. Keep container closed
when not in use. DO NOT store near food or feed.
Pesticide Disposal
Wastes resulting from using this product may be dis-
posed of on-site or at an approved waste disposal
facility. If these wastes cannot be disposed of according
to label instructions, contact your State Pesticide or
Environmental Control Agency, or the Hazardous Waste
representatives at the nearest EPA Regional Ofﬁce for
guidance.
Container Handling
Nonreﬁllable Container. DO NOT reuse or reﬁll this
container. Triple rinse or pressure rinse container (or
equivalent) promptly after emptying; then offer for recy-
cling, if available, or reconditioning, if appropriate, or
puncture and dispose of in a sanitary landﬁll, or by incin-
eration, or by other procedures approved by state and
local authorities.
Triple rinse containers small enough to shake
(capacity ≤ 5 gallons) as follows: Empty the remain-
ing contents into application equipment or a mix tank
and drain for 10 seconds after the ﬂow begins to drip. Fill
the container 1/4 full with water and recap. Shake for
10 seconds. Pour rinsate into application equipment or a
mix tank, or store rinsate for later use or disposal. Drain
for 10 seconds after the ﬂow begins to drip. Repeat this
procedure two more times.
Triple rinse containers too large to shake
 (capacity > 5 gallons) as follows: Empty the remain-
ing contents into application equipment or a mix tank.
Fill the container 1/4 full with water. Replace and tighten
closures. Tip container on its side and roll it back and
forth, ensuring at least one complete revolution, for
30 seconds. Stand the container on its end and tip it
back and forth several times. Turn the container over
onto its other end and tip it back and forth several times.
Empty the rinsate into application equipment or a mix
tank, or store rinsate for later use or disposal. Repeat
this procedure two more times.
Pressure rinse as follows: Empty the remaining con-
tents into application equipment or mix tank and
continue to drain for 10 seconds after the ﬂow begins to
drip. Hold container upside down over application
equipment or mix tank, or collect rinsate for later use or
disposal. Insert pressure rinsing nozzle in the side of the
container and rinse at about 40 PSI for at least 30 sec-
onds. Drain for 10 seconds after the ﬂow begins to drip.
(continued)

4
STORAGE AND DISPOSAL (continued)
Container Handling (continued)
Reﬁllable Container. Reﬁll this container with pesticide
only. DO NOT reuse this container for any other pur-
pose. Triple rinsing the container before ﬁnal disposal is
the responsibility of the person disposing of the contain-
er. Cleaning before reﬁlling is the responsibility of the
reﬁller.
Triple rinse as follows: To clean the container before
ﬁnal disposal, empty the remaining contents from this
container into application equipment or mix tank. Fill the
container about 10% full with water. Agitate vigorously or
recirculate water with the pump for 2 minutes. Pour or
pump rinsate into application equipment or rinsate col-
lection system. Repeat this rinsing procedure two more
times.
When this container is empty, replace the cap and seal
all openings that have been opened during use; return
the container to the point of purchase or to a designated
location. This container must only be reﬁlled with
 Headline
® SC fungicide or Headline® fungicide.
Prior to reﬁlling, inspect carefully for damage such as
cracks, punctures, abrasions, worn-out threads and clo-
sure devices. Check for leaks after reﬁlling and before
transport. DO NOT transport if this container is dam-
aged or leaking. If the container is damaged, or leaking,
or obsolete and not returned to the point of purchase or
to a designated location, triple rinse emptied container
and offer for recycling, if available, or dispose of contain-
er in compliance with state and local regulations.
In Case of Emergency
In case of large-scale spill of this product, call:
• CHEMTREC 1-800-424-9300
• BASF 1-800-832-HELP (4357)
In case of medical emergency regarding this product, call:
• Your local doctor for immediate treatment
• Your local poison control center (hospital)
• BASF: 1-800-832-HELP (4357)
Steps to take if material is released or spilled:
• In case of spill on ﬂoor or paved surfaces, mop and
remove to chemical waste storage area until proper dis-
posal can be made if product cannot be used according
to label.
• Dike and contain the spill with inert material (sand, earth,
etc.) and transfer liquid and solid diking material to sepa-
rate containers for disposal.
• Remove contaminated clothing and wash affected skin
areas with soap and water.
• Wash clothing before reuse.
• Keep the spill out of all sewers and open bodies of water.
Product Information
Headline SC, a suspension concentrate (SC), contains
the active ingredient pyraclostrobin, a member of the
 strobilurin class of chemistry derived from a natural
antifungal substance. Preventive applications optimize dis-
ease control, resulting in improved plant health. The
increase in plant health comes from the combined effect of
disease control (including fungal diseases listed in
Crop-speciﬁc directions), improved growth efﬁciency and
improved stress tolerance. Overall increased plant health
may result in an improvement in crop growth and crop
quality as well as increased crop yields.
Information regarding the contents and levels of metals in
this product is available on the Internet at
http://www.aapfco.org/metals.html.
To maximize disease control, apply Headline SC in a reg-
ularly scheduled protective spray program and use in a
rotation program with other fungicides.
Because of its high speciﬁc activity, Headline SC has
good residual activity against target fungi.
Headline SC is not for use in greenhouse or transplant
production.
Mode of Action
Pyraclostrobin, the active ingredient of Headline SC,
belongs to the group of respiration inhibitors classiﬁed by
the US EPA and Canada PMRA as quinone outside inhibi-
tors (QoI) or target site of action Group 11 fungicides.
Resistance Management
Headline SC is effective against pathogens resistant to
fungicides with modes of action different from those of QoI
fungicides (target site Group 11), such as dicarboximides,
sterol inhibitors, benzimidazoles, or phenylamides.
Fungal isolates resistant to Group 11 fungicides, such as
pyraclostrobin, azoxystrobin, ﬂuoxastrobin, triﬂoxystrobin,
and kresoxim-methyl, can eventually dominate the fungal
population if Group 11 fungicides are used predominantly
and repeatedly in the same ﬁeld in successive years as the
primary method of control for the targeted pathogen spe-
cies. This can result in reduction of disease control by
Headline SC or other Group 11 fungicides.
DO NOT exceed the maximum annual use rate or the total
number of Headline SC applications per year and the
maximum number of Headline SC applications stated in
Table 1. Headline
® SC fungicide Restrictions and
Limitations Overview and Table 2. Headline ® SC
 fungicide Crop-speciﬁc Requirements . Follow the
label instructions for use of Headline SC or other target
site of action Group 11 fungicides that have a similar site
of action on the same pathogens.
When using a Group 11 fungicide as a solo product, the
number of applications should be no more than 1/3 of the
total number of fungicide applications per year.

5
In programs applying or using tank mixes or pre-mixes of a
Group 11 fungicide with a fungicide of another group, the
number of Group 11 fungicide (QoI)-containing applica-
tions must not be more than 1/2 of the total number of
fungicide applications per year. In programs applying or
using Group 11 fungicides with both solo products and
mixtures, the number of Group 11 fungicide (Qol)-
containing applications must not be more than 1/2 of the
total number of fungicide applications per year.
In fungicide alternation programs of Group 11 (QoI)-
containing fungicides with non-Group 11 fungicides of
different modes of action, the maximum number of
sequential applications stated in Table 1. Headline
® SC
fungicide Restrictions and Limitations Overview and
Table 2. Headline ® SC fungicide Crop-speciﬁc
Requirements must be alternated with at least an equal
number of applications of a non-Group 11-containing
 fungicide prior to using the Group 11 (QoI)-containing
 fungicide again. If two sequential applications of a
Group 11 (QoI)-containing fungicide are made, follow this
block of applications with 2 or more applications of a
 non-Group 11-containing fungicide prior to using the
Group 11 (QoI)-containing fungicide again.
For resistance management, Headline SC contains a
Group 11 fungicide. Any fungal population may contain
individuals naturally resistant to Headline SC and other
Group 11 fungicides. A gradual or total loss of pest con-
trol may occur over time if these fungicides are used
repeatedly in the same ﬁelds. Appropriate resistance-man-
agement strategies should be followed.
To delay fungicide resistance, take one or more of the fol-
lowing steps:
• Rotate the use of Headline SC or other Group 11 fungi-
cides within a growing season sequence with different
groups that control the same pathogens.
• Use tank mixtures with fungicides from different target
site of action groups that are registered/permitted for the
same use and that are effective against the pathogens of
concern.
• Use at least the minimum application rate as labeled by
the manufacturer.
• Adopt an integrated disease management program for
fungicide use that includes scouting, uses historical infor-
mation related to pesticide use, and crop rotation, and
which considers host plant resistance, impact of environ-
mental conditions on disease development, disease
thresholds, as well as cultural, biological and other
chemical control practices.
• Consult your local extension specialist, certiﬁed crop
advisor and/or BASF representative for additional IPM
strategies established for your area. Headline SC can
be used in agricultural extension advisory (disease fore-
casting) programs, which recommend application timing
based on environmental factors favorable for disease
development.
• Where possible, make use of predictive disease models
to effectively time fungicide applications. Note that using
predictive models alone is not sufﬁcient to manage
resistance.
• Monitor treated fungal populations for resistance
development.
• Monitor efﬁcacy of all fungicides used in the disease
management program against the targeted pathogen
and record other factors that may inﬂuence fungicide
performance and/or disease development.
• If a Group 11 target site fungicide, such as
 Headline SC, appears to be less effective against a
pathogen that it previously controlled or suppressed,
contact a BASF representative, local extension specialist,
or certiﬁed crop advisor for further investigation.
• Contact your local extension specialist or certiﬁed crop
advisor for any additional pesticide resistance-
management and/or IPM recommendations for speciﬁc
crops and pathogens.
Application Instructions
Apply Headline SC rates as instructed in Table 2.
 Headline® SC fungicide Crop-speciﬁc
 Requirements . Apply Headline SC with ground sprayer,
aerial equipment, or through sprinkler irrigation equipment.
Check equipment frequently for calibration.
For containers 5 gallons or less, shake well prior to
use. For containers greater than 5 gallons, recircu-
late prior to use. Consult BASF Representatives for
additional information regarding agitation and recirculation.
Under low-level disease conditions, use minimum applica-
tion rates. For severe or threatening disease conditions,
use maximum application rates and shortened spray
intervals.
Cleaning Spray Equipment
Spray equipment must be cleaned thoroughly before and
after applying this product, particularly if a product with the
potential to injure crops was used prior to Headline SC.
Ground Application
Apply Headline SC in sufﬁcient water to ensure thorough
coverage of foliage, blooms, and fruit for optimum disease
control. Refer to Additives and Tank Mixing
 Information section for adjuvant or crop oil restrictions for
ground applications in corn. See Table 2. Headline
® SC
fungicide Crop-speciﬁc Requirements for in-furrow
instructions.
Aerial Application
For aerial application in New York State, DO NOT
apply within 100 feet of aquatic habitats (such as,
but not limited to lakes, reservoirs, rivers, streams,
marshes, ponds, estuaries, and commercial ﬁsh
ponds).

6
Unless otherwise speciﬁed in this label or in supplemental
labeling, use no less than 5 gallons of spray solution per
acre. For aerial application to citrus orchards, use no less
than 10 gallons of spray solution per acre. DO NOT apply
when conditions favor drift from target area.
Aerial Application to Alfalfa, Barley, Corn,
Oats, Rye, Soybean, Wheat and Triticale
Aerial applications of Headline® SC fungicide can be
made to corn, soybean, wheat and triticale in water vol-
umes of 1 or more gallons of spray solution per acre (gpa).
Aerial applications of Headline SC can be made to alfalfa,
barley, oats and rye in water volumes of 2 or more gallons
of spray solution per acre (gpa). The use of a crop oil or
adjuvant can be used to improve spray coverage (see
Additives and Tank Mixing Information section). Refer
to the adjuvant product label for speciﬁc use directions
and restrictions.
For optimum results in high disease pressure, use a mini-
mum spray volume of 4 gpa. Select spray nozzles,
pumping pressure, and sprayer height to provide spray
droplets that penetrate throughout the crop canopy. Spray
calibration must be conducted to conﬁrm spray droplet
sizes. Continue to monitor spray application (including
weather conditions) to ensure proper droplet size and can-
opy penetration.
Spray volumes of 5 gallons or more per acre. For
applications with spray volumes of 5 gallons or more per
acre, an adjuvant can be used to improve spray coverage
(see Additives and Tank Mixing Information ). Refer to
the adjuvant product label for speciﬁc use directions and
restrictions.
Select spray nozzles, pumping pressure, and sprayer
height to provide spray droplets that penetrate throughout
the crop canopy. Calibrate spray to conﬁrm spray droplet
sizes. Monitor spray application including weather condi-
tions to ensure proper droplet size and canopy
penetration.
Aerial Application Methods and Equipment
The interaction of many equipment-related and weather-
related factors determines the potential for spray drift. The
applicator and the grower are responsible for considering
all these factors when making decisions.
DO NOT apply under circumstances where possible drift
to unprotected persons, to food, forage, or other plantings
that might be damaged, or crops thereof rendered unﬁt for
sale, use or consumption can occur.
The following drift management requirements must be fol-
lowed to avoid off-target drift movement to agricultural ﬁeld
crops. These requirements DO NOT apply to forestry
applications, public health uses, or to applications using
dry formulations.
Mandatory Spray Drift Management
Aerial Applications:
• DO NOT release spray at a height greater than 10 ft
above the ground or vegetative canopy, unless a great-
er application height is necessary for pilot safety.
• Applicators are required to select nozzle and pressure
that deliver a medium or coarser droplet size
(ASABE S641).
• DO NOT apply when wind speeds exceed 15 mph at
the application site. If the windspeed is greater than
10 mph, the boom length must be 65% or less of the
wingspan for ﬁxed wing aircraft and 75% or less of the
rotor diameter for helicopters. Otherwise, the boom
length must be 75% or less of the wingspan for ﬁxed-
wing aircraft and 90% or less of the rotor diameter for
helicopters
• If the windspeed is 10 miles per hour or less, applica-
tors must use 1/2 swath displacement upwind at the
downwind edge of the ﬁeld. When the windspeed is
between 11 to 15 miles per hour, applicators must use
3/4 swath displacement upwind at the downwind edge
of the ﬁeld.
• DO NOT apply during temperature inversions.
Ground Boom Applications:
• User must only apply with the release height recom-
mended by the manufacturer, but no more than 4 ft
above the ground or crop canopy.
• Applicators are required to select nozzle and pressure
that deliver a medium or coarser droplet size
(ASABE S572).
• DO NOT apply when wind speeds exceed 15 miles
per hour at the application site.
• DO NOT apply during temperature inversions.
Spray Drift Advisories
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-
SITE SPRAY DRIFT. BE AWARE OF NEARBY
NONTARGET SITES AND ENVIRONMENTAL
CONDITIONS.
Importance of Droplet Size
An effective way to reduce spray drift is to apply large
droplets. Use the largest droplets that provide target pest
control. While applying larger droplets will reduce spray
drift, the potential for drift will be greater if applications are
made improperly or under unfavorable environmental
conditions.
Controlling Droplet Size - Ground Boom
• Volume - Increasing the spray volume so that larger
droplets are produced will reduce spray drift. Use the
highest practical spray volume for the application. If a
greater spray volume is needed, consider using a nozzle
with a higher ﬂow rate.
• Pressure - Use the lowest spray pressure recommend-
ed for the nozzle to produce the target spray volume and
droplet size.

7
• Spray Nozzle - Use a spray nozzle that is designed for
the intended application. Consider using nozzles
designed to reduce drift.
Controlling Droplet Size - Aircraft
• Adjust Nozzles - Follow nozzle manufacturers’ recom-
mendations for setting up nozzles. Generally, to reduce
ﬁne droplets, nozzles should be oriented parallel with the
airﬂow in ﬂight.
Boom Height – Ground Boom
For ground equipment, the boom should remain level with
the crop and have minimal bounce.
Release Height - Aircraft
Higher release heights increase the potential for spray drift.
Shielded Sprayers
Shielding the boom or individual nozzles can reduce spray
drift. Consider using shielded sprayers. Verify that the
shields are not interfering with the uniform deposition of
the spray on the target area.
Temperature and Humidity
When making applications in hot and dry conditions, use
larger droplets to reduce effects of evaporation.
Temperature Inversions
Drift potential is high during a temperature inversion. Tem-
perature inversions are characterized by increasing
temperature with altitude and are common on nights with
limited cloud cover and light to no wind. The presence of
an inversion can be indicated by ground fog or by the
movement of smoke from a ground source or an aircraft
smoke generator. Smoke that layers and moves laterally in
a concentrated cloud (under low wind conditions) indicates
an inversion, while smoke that moves upward and rapidly
dissipates indicates good vertical mixing. Avoid applica-
tions during temperature inversions.
Wind
Drift potential generally increases with wind speed. AVOID
APPLICATIONS DURING GUSTY WIND CONDITIONS.
Applicators need to be familiar with local wind patterns
and terrain that could affect spray drift.
Boomless Ground Applications
Setting nozzles at the lowest effective height will help to
reduce the potential for spray drift.
Handheld Technology Applications
Take precautions to minimize spray drift.
Directions For Use Through Sprinkler
Irrigation Systems
Sprayer Preparation
Chemical tank and injector system must be thoroughly
cleaned. Flush system with clean water.
Application Instructions
Apply Headline® SC fungicide at rates and timings
speciﬁed in this label.
Sprinkler Irrigation Applications Use Precautions
• Apply this product only through sprinkler irrigation sys-
tems including center pivot, lateral move, end tow, side
(wheel) roll, traveler, big gun, solid set, or hand move irri-
gation systems. DO NOT apply this product through any
other type of irrigation system.
• Add this product to the pesticide supply tank containing
sufﬁcient water to maintain a continuous ﬂow by the
injection equipment. In continuous moving systems,
inject this product/water mixture continuously, applying
the labeled rate per acre for that crop. DO NOT exceed
1/2 inch (13,577 gallons) per acre. In stationary or non-
continuous moving systems, inject the product/water
mixture in the last 15 to 30 minutes of each set allowing
sufﬁcient time for all of the required pesticide to be
applied by all the sprinkler heads and applying the
labeled rate per acre for that crop. DO NOT apply when
wind speed favors drift beyond the area intended for
treatment. Crop injury, lack of effectiveness, or illegal
pesticide residues in the crop can result from nonuniform
distribution of treated water. Thorough coverage of foli-
age is required for good control. Maintain agitation
during the entire application period.
• Contact state extension service specialists, equipment
manufacturers, or other experts for calibration questions.
• The system must contain a functional check valve,
 vacuum-relief valve, and low-pressure drain appropriately
located on the irrigation pipeline to prevent water-source
contamination from backﬂow.
• The pesticide injection pipeline must contain a functional,
automatic, quick-closing check valve to prevent the ﬂow
of ﬂuid back toward the injection pump.
• The pesticide injection pipeline must also contain a func-
tional, normally closed, solenoid-operated valve located
on the intake side of the injection pump and connected
to the system interlock to prevent ﬂuid from being with-
drawn from the supply tank when the irrigation system is
either automatically or manually shut down.
• The system must contain functional interlocking controls
to automatically shut off the pesticide-injection pump
when the water pump motor stops.
• The irrigation line or water pump must include a function-
al pressure switch that will stop the water pump motor
when the water pressure decreases to the point where
pesticide distribution is adversely affected.
• Systems must use a metering pump, such as a positive
displacement injection pump (e.g. diaphragm pump),
effectively designed and constructed of materials that are
compatible with pesticides and capable of being ﬁtted
with a system interlock.
• Allow sufﬁcient time for pesticide to be ﬂushed through
all lines and all nozzles before turning off irrigation water.
A person knowledgeable of the chemigation system and
responsible for its operation, or under supervision of the

8
responsible person, shall shut the system down and
make necessary adjustments should the need arise.
• DO NOT connect an irrigation system (including green-
house systems) used for pesticide application to a public
water system unless the pesticide label-prescribed safe-
ty devices for public water systems are in place.
Speciﬁc Instructions for Public Water
Systems
1. Public water system means a system for the provision to
the public of piped water for human consumption if such
system has at least 15 service connections or regularly
serves an average of at least 25 individuals daily at least
60 days out of the year.
2. Chemigation systems connected to public water sys-
tems must contain a functional, reduced-pressure zone,
back-ﬂow preventer (RPZ) or the functional equivalent in
the water supply line upstream from the point of pesti-
cide introduction. As an option to the RPZ, the water
from the public water system must be discharged into a
reservoir tank prior to pesticide introduction. There shall
be a complete physical break (air gap) between the out-
let end of the ﬁll pipe and the top or overﬂow rim of the
reservoir tank of at least twice the inside diameter of the
ﬁll pipe.
3. The pesticide injection pipeline must contain a function-
al, automatic, quick-closing check valve to prevent the
ﬂow of ﬂuid back toward the injection pump.
4. The pesticide injection pipeline must contain a function-
al, normally closed, solenoid-operated valve located on
the intake side of the injection pump and connected to
the system interlock to prevent ﬂuid from being with-
drawn from the supply tank when the irrigation system is
either automatically or manually shut down.
5. The system must contain functional interlocking controls
to automatically shut off the pesticide injection pump
when the water pump motor stops, or in cases where
there is no water pump, when the water pressure
decreases to the point where pesticide distribution is
adversely affected.
6. Systems must use a metering pump, such as a positive
displacement injection pump (e.g. diaphragm pump),
effectively designed and constructed of materials that
are compatible with pesticides and capable of being ﬁt-
ted with a system interlock.
Additives and Tank Mixing Information
Headline® SC fungicide can be tank mixed with most
recommended fungicides, insecticides, herbicides, liquid
fertilizers, biological control products, adjuvants, and addi-
tives as speciﬁed in Table 2. Headline
® SC fungicide
Crop-speciﬁc Requirements .
Under some conditions, the use of additives or adjuvants
may improve the performance of Headline SC. However,
all varieties and cultivars have not been tested with possi-
ble tank mix combinations. Local conditions can also
inﬂuence crop tolerance and may not match those under
which BASF has conducted testing. Physical incompatibili-
ty, reduced disease control, or crop injury can result from
mixing Headline SC with other products. Therefore,
before using any tank mix (fungicides, insecticides, herbi-
cides, liquid fertilizers, biological control products,
adjuvants and additives), test the combination on a small
portion of the crop to be treated to ensure that a phytotox-
ic response will not occur as a result of application. Follow
the most restrictive label.
Adjuvant or Crop Oil Use Limitations on
Corn (ground and aerial applications)
Adjuvant crop damage can occur when an adjuvant or
crop oil is used after the V8 stage and before the VT stage
(the VT stage is deﬁned as when the tassel’s last branch is
completely visible outside the whorl). If an adjuvant or crop
oil is used after the V8 stage and before the VT stage, the
grower and user are responsible for contacting the adju-
vant source (adjuvant distributor, retailer, or manufacturer)
for advice and conﬁrmation that the adjuvant has been
tested and proven to be safe for application from V8 to VT
corn stage. Refer to adjuvant and/or crop oil labels for spe-
ciﬁc use directions and restrictions. Always follow the most
restrictive label.
Another fungicide or an insecticide may be included in the
tank mix if needed and labeled for use on corn. Refer to
the tank mix pesticide product labels for speciﬁc use direc-
tions and restrictions. Always follow the most restrictive
label.
Mixing Order
1. Water - Agitate a thoroughly clean sprayer tank 3/4 full
of clean water.
2. Agitation - Maintain constant agitation throughout mix-
ing and application.
3. Inductor - If an inductor is used, rinse it thoroughly
after each component has been added.
4. Products in PVA bags - Place any product contained
in water-soluble PVA bags into the mixing tank. Wait
until all water-soluble PVA bags have fully dissolved and
the product is evenly mixed in the spray tank before
continuing.
5. Water-dispersible products (such as Headline SC,
dry ﬂowables, wettable powders, suspension concen-
trates, or suspo-emulsions) - For containers 5 gallons
or less, shake well prior to use. For containers
greater than 5 gallons, recirculate prior to use.
Consult BASF Representatives for additional information
regarding agitation and recirculation.
6. Water-soluble products
7. Emulsiﬁable concentrates (such as oil concentrates
when applicable)
8. Water-soluble additives (such as ammonium sulfate
[AMS] or urea ammonium nitrate [UAN] when applicable)
9. Remaining quantity of water
Make sure each component is thoroughly mixed and sus-
pended before adding tank mix partners. Maintain
constant agitation during application. See Table 2.
 Headline
® SC fungicide Crop-speciﬁc Requirements
for more details.

9
Restrictions and Limitations - All Crops
• DO NOT exceed the maximum product rate (ﬂ ozs/A) per
year, the maximum rate per application, or the total num-
ber of applications of Headline
® SC fungicide per year
as stated in Table 1. Headline® SC fungicide
 Restrictions and Limitations Overview and Table 2.
Headline® SC fungicide Crop-speciﬁc
 Requirements . Preharvest interval (PHI) restrictions are
also included in these tables.
• DO NOT use Headline SC in greenhouse or transplant
production.
• For aerial application in New York State, DO NOT
apply within 100 feet of aquatic habitats (such as,
but not limited to lakes, reservoirs, rivers, streams,
marshes, ponds, estuaries, and commercial ﬁsh
ponds).
Crop Rotation Restriction
Crops listed on the Headline SC, Cabrio® EG fungicide
and Pristine® fungicide labels may be planted immedi-
ately following the last application. For all other crops,
DO NOT plant sooner than 14 days after the last
application.
Ground Application Directed or Banded
Sprays
The application rates shown in the following tables pertain
to both aerial and ground (broadcast) methods of applica-
tion. Headline SC may also be applied as a directed or
banded spray over the rows or plant beds with alleys or
row middles left unsprayed. For such uses, reduce the
Headline SC rate in proportion to the area actually
sprayed. This adjustment is necessary to prevent applying
the product at use rates higher than permitted on this
label.
Use the following formula to determine the broadcast
equivalent rate for directed or banded sprays:
sprayed bed width + unsprayed row middles = total row
width
Sprayed Bed
Width in Inches
X
Broadcast Rate
=
Band Rate
Total Row
Width in Inches
Treated Acre Field Acre
EXAMPLE: Directed spray application to 45-inch plant
beds separated by 15-inch unsprayed row-middles at a
12 ﬂ ozs/A label broadcast rate:
45 inches sprayed bed width + 15 inches unsprayed row
middles = 60 inches total row width
45 Inches Sprayed
Bed Width
X
12 ﬂ ozs
Headline SC
=
9 ﬂ ozs
Headline SC
60 Inches Total
Row Width
Treated Acre Field Acre

10
Table 1. Headline® SC fungicide Restrictions and Limitations Overview 1
Crop/Crop Group2
Minimum Time
from Application
to Harvest
(PHI) (days)
Maximum
Product Rate
per Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum Product
Rate per Year
(ﬂ ozs/A)
(lbs ai pyraclostrobin)
Alfalfa3
14 9 3 27
(0.45)
Barley See Table 2. Headline ®
SC fungicide Crop-
speciﬁc Requirements
92 18
(0.29)
Citrus Fruits Group 4
01 5 2 54
(0.88)
Corn5,7
(all types) 71 2 2 72
(1.18)
Cotton5
30 12 2 36
(0.58)
Dried Shelled
Peas and Beans5,7
(except soybeans)
21 9 2 18
(0.29)
Edible-podded
Legume Vegetables 79 2 18
(0.29)
Grass Grown for Seed 14 12 2 24
(0.39)
Mint 14 12 2 48
(0.78)
Oats Apply no later than the
beginning of ﬂowering
(Feekes 10.5, Zadok’s 59)
92 18
(0.29)
Oilseed Crops 5
21 12 2 24
(0.39)
Peanut5,7
14 15 2 45
(0.73)
Pecan 14 7 2 28
(0.46)
Rye Apply no later than
50% head emergence
(Feekes 10.3, Zadok’s 55)
92 18
(0.29)
Sorghum Apply no later than
25% ﬂowering 12 1 12
(0.20)
Soybean5,7
21 12 2 24
(0.39)
Succulent Shelled
Peas and Beans 79 2 18
(0.29)
Sugar Beet5
(roots and tops) 71 2 2 48
(0.78)
Sugarcane 6
14 12 2 48
(0.78)
Tuberous and Corm
Vegetables Subgroup 5
(includes potato)
31 2 1 72
(1.18)
(continued)

11
Table 1. Headline® SC fungicide Restrictions and Limitations Overview 1 (continued)
Crop/Crop Group2
Minimum Time
from Application
to Harvest
(PHI) (days)
Maximum
Product Rate
per Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum Product
Rate per Year
(ﬂ ozs/A)
(lb ai pyraclostrobin)
Wheat and Triticale Apply no later than the
beginning of ﬂowering
(Feekes 10.5, Zadok’s 59)
92 1 8
(0.29)
1 See Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements for complete directions and exceptions.
2 For a complete list of crops within a crop group, see Table 2. Headline ® SC fungicide Crop-speciﬁc
Requirements .
3 DO NOT apply more than 27 ﬂ ozs/A (0.45 lb ai/acre) of Headline SC in alfalfa per year.
4 Maximum product rate per acre per application may vary for citrus fruits depending on target disease. Refer to
Table 2. Headline® SC fungicide Crop-speciﬁc Requirements , Citrus Fruits for maximum rates per applica-
tion by target disease.
5 The maximum product rate per year includes the combination in-furrow and foliar uses.
6 Not for use on sugarcane in California.
7 Not for in-furrow use in California.
Aerial application is permitted for all labeled crops. For aerial application in New York State, DO NOT apply
within 100 feet of aquatic habitats (such as, but not limited to lakes, reservoirs, rivers, streams, marshes,
ponds, estuaries, and commercial ﬁsh ponds).

12
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year*
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Alfalfa Anthracnose
Colletotrichum trifolii
Common leaf spot
Pseudopeziza medicaginis
Downy mildew
Peronospora trifoliorum
Leaf spot
Leptosphaerulina briosiani
Powdery mildew
Erysiphe pisi
Rhizoctonia
blight/black patch
Rhizoctonia spp.
Rust
Uromyces spp.
Spring black stem
and leaf spot
Phoma medicaginis
Stagnospora leaf spot
Stagnospora meliloti
Stemphyllium leaf spot
Stemphyllium spp.
Summer black stem
and leaf spot
Cercospora medicaginis
Yellow leaf blotch
Leptotrichila medicaginis
6 to 9 3 27
(0.45 lb
ai/acre)
14
Application Directions. For optimal disease control, begin Headline SC applications prior to disease development.
Resistance Management. DO NOT make more than three (3) Headline SC applications per year.
Repeat applications on a 14 to 21 day interval if conditions are conducive for disease development. DO NOT make
more than two (2) Headline SC applications per cutting or three (3) Headline SC applications per year. Use the high-
er rate and shorter interval when disease pressure is high.
* DO NOT apply more than 27 ﬂ ozs/A (0.45 lb ai/acre) of Headline SC in alfalfa per year.

13
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Barley Black point Kernel blight or
Head mold
Cochliobolus sativus,
Alternaria spp.
Leaf rust
Puccinia hordei,
P. recondita
Net blotch
Pyrenophora teres
Powdery mildew
Erysiphe graminis f. sp.,
hordei
Scald
Rhynchosporium secalis
Septoria leaf and
glume blotch
Septoria spp.,
Stagonospora spp.
Spot blotch
Cochliobolus sativus
Stem rust
Puccinia graminis f. sp.,
tritici
Stripe rust
Puccinia striiformis
Tan spot
Yellow leaf spot
Pyrenophora trichostoma
6 to 9* 2 18
(0.29 lb
ai/acre)
Apply no later
than 50% head
emergence
(Feekes 10.3,
Zadok's 55);
14 days in
selected states
(see map).
Application Directions. Begin Headline SC applications prior to disease development. To maximize yields in cere-
als, protect the ﬂag leaf. Apply Headline SC immediately after ﬂag-leaf emergence for optimum results.
Headline SC does not control Fusarium head blight (head scab) or prevent the reductions in grain quality that can
result from this disease. When head blight is a concern, manage this disease with fungicides that are labeled for and
effective in managing this disease, and with cultural practices like crop rotation and plowing to reduce crop residues
that serve as an inoculum source.
Resistance Management. To limit development of resistance, DO NOT apply more than 0.29 lb ai pyraclostrobin
(18 ﬂ ozs Headline SC) per acre per year.
DO NOT make more than two (2) sequential Headline SC applications before alternating to a labeled non-Group 11
fungicide with a different mode of action.
DO NOT harvest barley hay or feed green-chopped barley within 14 days of last application.
*
 For early season control of net blotch, Septoria leaf and glume blotch, spot blotch, and tan spot when conditions
favor disease development, apply 3 to 6 ﬂ ozs per acre of Headline SC either in combination with a herbicide appli-
cation or when conditions favor disease development. When the 3 to 6 ﬂ ozs early season application rate is used, a
second application of Headline SC may be required to protect the emerged ﬂag leaf. Environmental conditions for
disease or current disease pressure at the time of ﬂag-leaf emergence should be used to determine the Headline SC
rate for the second application. For high disease pressure, use the higher rate of Headline SC. Early season control
is not registered for use in California.

14
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Application Directions (continued)
Barley can be harvested 14 days after the last application in the following states: AZ (north of I-10), CO, ID, MT (west
of Rt 87/I-15), NV, NM, OR, TX (west of Rt 283/377), UT, WA, and WY (west of I-25/I-90), as shown in the
 Headline SC Use Area Map - Barley, 14-day PHI .
Headline SC Use Area Map - Barley
14-day PHI

15
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Citrus Fruits Group
Australian desert lime
Australian ﬁnger lime
Australian round lime
Brown River ﬁnger lime
Calamondin
Citron
Citrus hybrids
Chironja
Grapefruit
Japanese summer
grapefruit
Kumquat
Lemon
Lime
Mediterranean
mandarin
Mount white lime
New guinea wild lime
Orange, sour
Orange, sweet
Pummelo
Russell River lime
Satsuma mandarin
Sweet lime
Tachibana orange
Tahiti lime
Tangelo
Tangerine (mandarin)
Tangor
Trifoliate orange
Uniq fruit
Cultivars, varieties and/
or hybrids of these
Greasy spot
Mycosphaerella citri
Scab
Elsinoe spp.
9 to 12 2 54
(0.88 lb
ai/acre)
0
Alternaria brown spot
Alternaria citri
Anthracnose
Colletotrichum
acutatum,
C. gloeosporioides
Black spot
Guignardia citricarpa
Melanose
Diaporthe citri
Post bloom fruit drop
Colletotrichum
acutatum
12 to 15
Application Directions. Begin Headline SC applications prior to disease development and continue on a 10- to
21-day interval.
Use the higher rate when disease pressure is high.
For control of diseases other than greasy spot , integrate 1 to 2 Headline SC applications early in the spray pro-
gram. For greasy spot control , integrate 1 to 2 Headline SC applications into the fungicide program during the
mid-to-late season.
For aerial application to citrus orchards, use no less than 10 gallons of spray solution per acre.
No livestock feeding restrictions.
Resistance Management. To limit development of resistance, DO NOT apply more than 0.88 lb ai pyraclostrobin
(54 ﬂ ozs of Headline SC) per acre per year.
DO NOT make more than two (2) sequential Headline SC applications before alternating to a labeled non-Group 11
fungicide with a different mode of action.

16
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year*
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Corn
Field corn
Popcorn
Sweet corn
Seed production
corn
Anthracnose**
Colletotrichum graminicola
Eyespot
Kabatiella zeae
Gray leaf spot
Cercospora zea-maydis
Northern corn leaf blight**
Exserohilum turcicum
Northern corn leaf spot**
Cochliobolus carbonum
Physoderma brown spot**
Physoderma maydis
Rust, common
Puccinia sorghi
Rust, Southern
Puccinia polyspora
Southern corn leaf blight**
Bipolaris maydis
Yellow leaf blight**
Phyllosticta maydis
6 to 12 2 72
(1.18 lbs
ai/acre)
7
Application Directions. Begin Headline SC applications prior to disease development and continue on a 7- to
14-day interval if conditions are favorable for disease development.
Use the higher rate and shorter interval when disease pressure is high. Under high disease pressure for Northern corn
leaf blight and Southern corn leaf blight, apply 9 to 12 ﬂ ozs per acre.
Headline SC can be used with adjuvants in corn. See Additives and Tank Mixing Information and Mixing Order
sections for more details.
No livestock feeding restrictions.
Resistance Management. To limit development of resistance, DO NOT apply more than 1.18 lbs ai pyraclostrobin
(72ﬂ ozs of Headline SC) per acre per year.
In ﬁeld corn, DO NOT make more than two (2) Headline SC applications per year.
DO NOT make more than two (2) sequential Headline SC applications before alternating to a labeled non-Group 11
fungicide with a different mode of action. If more than two (2) Headline SC applications are made in a multiple spray
program, alternate each subsequent Headline SC application with at least one (1) application of a non-Group 11
fungicide.
*
 The maximum product rate per year includes the combination of in-furrow and foliar uses.
** The use rate in California is 9 to 12 ﬂ ozs per acre.

17
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Instructions for In-furrow Use to Aid in the Control of Soilborne Rhizoctonia and the Suppression of
Soilborne Fusarium Species in Corn*
Rate per
1000 row feet
(ﬂ oz product)
Headline SC Rate
(ﬂ ozs/A)
15-inch
rows
20-inch
rows
22-inch
rows
30-inch
rows
32-inch
rows
34-inch
rows
36-inch
rows
38-inch
rows
40-inch
rows
0.1 3.5
0.2 7.0 5.2 4.7 3.5 3.3 3.2 3.0
0.3 10.5 7.8 7.1 5.2 5.0 4.8 4.5 4.3 4.0
0.4 see
footnote1 10.4 9.5 6.9 6.7 6.4 6.0 5.7 5.4
0.5 see
footnote1
see
footnote1 11.8 8.7 8.4 8.0 7.5 7.1 6.7
0.6 see
footnote1
see
footnote1
see
footnote1 10.4 10.0 9.6 9.0 8.5 8.1
0.7 see
footnote1
see
footnote1
see
footnote1
see
footnote1 11.7 11.2 10.5 10.0 9.4
0.8 see
footnote1
see
footnote1
see
footnote1
see
footnote1
see
footnote1
see
footnote1 12.0 11.4 10.8
Application Directions. Use 0.1 to 0.8 ﬂ oz of Headline SC per 1000 row feet. Apply at planting as an in-furrow
application by directing the spray into the furrow before seed is covered. Use a minimum application volume of
2.5 gallons of water per acre.
When Rhizoctonia or Fusarium seedling disease pressure conditions are expected to be severe or if the ﬁeld has a
history of seedling diseases, use Headline SC at a product rate per acre equivalent to 9 to 12 ﬂ ozs and/or tank mix
with a fungicide having a different mode of action.
DO NOT apply more than 12 ﬂ ozs per acre in-furrow of Headline SC.
*
 Not for in-furrow use in California.
1 For 32- to 34-inch rows, use a maximum of 0.7 ﬂ oz per 1000 row feet.
For 30-inch rows, use a maximum of 0.6 ﬂ oz per 1000 row feet.
For 22-inch rows, use a maximum of 0.5 ﬂ oz per 1000 row feet.
For 20-inch rows, use a maximum of 0.4 ﬂ oz per 1000 row feet.
For 15-inch rows, use a maximum of 0.3 ﬂ oz per 1000 row feet.

18
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year*
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Cotton Alternaria leaf spot, boll rot
Alternaria spp.
Anthracnose, boll rot
Glomerella spp.
Ascochyta blight, boll rot
Ascochyta spp.
Cercospora blight
and leaf spot
Cercospora spp.
Diplodia boll rot
Diplodia spp.
Hard lock, boll rot
Fusarium spp.
Phoma blight, boll rot
Phoma spp.
Rust
Puccinia spp.,
Phykopsora spp.
Stemphyllium leaf spot
Stemphyllium spp.
6 to 12 2 36
(0.58 lb
ai/acre)
30
Application Directions. For foliar and boll rot disease control , begin Headline SC applications prior to disease
development and continue on a 7- to 14-day interval if conditions are favorable for disease development.
Use the higher rate and shorter interval when disease pressure is high. For seedling disease control , see in-furrow
application instructions following.
Headline SC can be used with adjuvants in cotton. See Additives and Tank Mixing Information and Mixing
Order sections for more details.
No livestock grazing or feeding restrictions.
Resistance Management. To limit development of resistance, DO NOT apply more than 0.58 lb ai pyraclostrobin
(36 ﬂ ozs of Headline SC) per acre per year.
DO NOT make more than two (2) sequential Headline SC applications before alternating to a labeled non-Group 11
fungicide with a different mode of action.
*
 The maximum product rate per year includes the combination of in-furrow and foliar uses.

19
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Instructions for In-furrow Use to Aid in the Control of Soilborne Rhizoctonia in Cotton
Rate per
1000 row feet
(ﬂ oz product)
Headline SC Rate
(ﬂ ozs/A)
15-inch
rows
20-inch
rows
22-inch
rows
30-inch
rows
32-inch
rows
34-inch
rows
36-inch
rows
38-inch
rows
40-inch
rows
0.1 3.5
0.2 7.0 5.2 4.7 3.5 3.3 3.2 3.0
0.3 10.5 7.8 7.1 5.2 5.0 4.8 4.5 4.3 4.0
0.4 see
footnote1 10.4 9.5 6.9 6.7 6.4 6.0 5.7 5.4
0.5 see
footnote1
see
footnote1 11.8 8.7 8.4 8.0 7.5 7.1 6.7
0.6 see
footnote1
see
footnote1
see
footnote1 10.4 10.0 9.6 9.0 8.5 8.1
0.7 see
footnote1
see
footnote1
see
footnote1
see
footnote1 11.7 11.2 10.5 10.0 9.4
0.8 see
footnote1
see
footnote1
see
footnote1
see
footnote1
see
footnote1
see
footnote1 12.0 11.4 10.8
Application Directions. Use 0.1 to 0.8 ﬂ oz of Headline SC per 1000 row feet. Apply at planting as an in-furrow
application by directing the spray into the furrow before seed is covered. Use a minimum application volume of
2.5 gallons of water per acre.
When Rhizoctonia seedling disease pressure conditions are expected to be severe or if the ﬁeld has a history of
seedling diseases, use Headline SC at a product rate per acre equivalent to 9 to 12 ﬂ ozs and/or tank mix with a
fungicide having a different mode of action.
DO NOT apply more than 12 ﬂ ozs per acre of Headline SC.
1 For 32- to 34-inch rows, use a maximum of 0.7 ﬂ oz per 1000 row feet.
For 30-inch rows, use a maximum of 0.6 ﬂ oz per 1000 row feet.
For 22-inch rows, use a maximum of 0.5 ﬂ oz per 1000 row feet.
For 20-inch rows, use a maximum of 0.4 ﬂ oz per 1000 row feet.
For 15-inch rows, use a maximum of 0.3 ﬂ oz per 1000 row feet.

20
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year*
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Dried Shelled
Peas and
Beans (except
soybeans)
Broad bean
Chickpea
Guar
Lablab bean
Lentil
Pigeon pea
Lupinus spp.
Grain lupin
Sweet lupin
White lupin
Phaseolus spp.
Field bean
Kidney bean
Lima bean
Navy bean
Pink bean
Pinto bean
Tepary bean
Vigna spp.
Adzuki bean
Black-eyed pea
Catjang
Cowpea
Crowder pea
Moth bean
Mung bean
Rice bean
Southern pea
Urd bean
Pisum spp.
Field pea
Anthracnose
Colletotrichum spp.
Alternaria leaf and pod spot
Alternaria spp.
Ascochyta blight
Phoma exigua,
Ascochyta spp.
Asian soybean rust
Phakopsora pachyrhizi
Cercospora leaf spot
Cercospora spp.
Downy mildew
Phytophthora nicotianae
Mycosphaerella blight
Mycosphaerella spp.
Powdery mildew
Erysiphe polygoni
Rust
Uromyces appendiculatus
6 to 9 2 18
(0.29 lb
ai/acre)
21
Application Directions. Begin Headline SC applications prior to disease development and continue on a 7- to
14-day interval if conditions are favorable for disease development.
Use the higher rate and shorter interval when disease pressure is high.
Bean forage, bean hay, pea vines, and pea hay may be fed no sooner than 14 days after last application.
Headline SC can be used with adjuvants in dried shelled peas and beans (except soybean). See Additives and Tank
Mixing Information and Mixing Order sections for more details.
Resistance Management. To limit development of resistance, DO NOT apply more than 0.29 lb ai pyraclostrobin
(18 ﬂ ozs of Headline SC) per acre per year.
DO NOT make more than two (2) sequential Headline SC applications before alternating to a labeled non-Group 11
fungicide with a different mode of action.
*
 The maximum product rate per year includes the combination of in-furrow and foliar uses.

21
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Instructions for In-furrow Use to Aid in the Control of Soilborne Rhizoctonia and the Suppression of
Soilborne Fusarium Species in Dried Shelled Peas and Beans* ,** (except soybeans)
Rate Per
1000 row feet
(ﬂ oz product)
Headline SC Rate
(ﬂ ozs/A)
15-inch
rows
20-inch
rows
22-inch
rows
30-inch
rows
32-inch
rows
34-inch
rows
36-inch
rows
38-inch
rows
40-inch
rows
0.1 3.5
0.2 7.0 5.2 4.7 3.5 3.3 3.2 3.0
0.3 see
footnote1 7.8 7.1 5.2 5.0 4.8 4.5 4.3 4.0
0.4 see
footnote1
see
footnote1
see
footnote1 6.9 6.7 6.4 6.0 5.7 5.4
0.5 see
footnote1
see
footnote1
see
footnote1 8.7 8.4 8.0 7.5 7.1 6.7
0.6 see
footnote1
see
footnote1
see
footnote1
see
footnote1
see
footnote1
see
footnote1 9.0 8.5 8.1
Application Directions. Use 0.1 to 0.6 ﬂ oz of Headline SC per 1000 row feet. Apply at planting as an in-furrow
application by directing the spray into the furrow before seed is covered. Use a minimum application volume of
2.5 gallons of water per acre.
When Rhizoctonia or Fusarium seedling disease pressure conditions are expected to be severe or if the ﬁeld has a
history of seedling diseases, use Headline SC at a product rate per acre equivalent to 9 ﬂ ozs and/or tank mix with a
fungicide having a different mode of action.
DO NOT apply more than 9 ﬂ ozs per acre in-furrow of Headline SC.
*
 Adzuki bean, black-eyed pea, broad bean, catjang, chickpea, crowder pea, ﬁeld bean, grain lupin, guar, kidney bean,
lablab bean, lima bean, moth bean, mung bean, navy bean, pink bean, pinto bean, rice bean, Southern pea, sweet
lupin, tepary bean, urd bean, and white lupin
**
 Not for in-furrow use in California.
1 For 30- to 34-inch rows, use a maximum of 0.5 ﬂ oz per 1000 row feet.
For 20- to 22-inch rows, use a maximum of 0.3 ﬂ oz per 1000 row feet.
For 15-inch rows, use a maximum of 0.2 ﬂ oz per 1000 row feet.

22
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Edible-podded
Legume
Vegetables
Jack bean
Pigeon pea
Soybean
(immature
seed)
Sword bean
Phaseolus spp.
Runner bean
Snap bean
Wax bean
Vigna spp.
Asparagus bean
Chinese
longbean
Moth bean
Yardlong bean
Pisum spp.
Dwarf pea
Edible-podded
pea
Snowpea
Sugar snap pea
Alternaria leaf and pod spot
Alternaria spp.
Anthracnose
Colletotrichum spp.
Ascochyta blight
Phoma exigua,
Ascochyta spp.
Asian soybean rust
Phakopsora pachyrhizi
Cercospora leaf spot
Cercospora spp.
Downy mildew
Phytophthora nicotianae
Mycosphaerella blight
Mycosphaerella spp.
Powdery mildew
Erysiphe Polygoni
Rust
Uromyces appendiculatus
6 to 9 2 18
(0.29 lb
ai/acre)
7
Application Directions. Begin Headline SC applications prior to disease development and continue on a 7- to
14-day interval if conditions are favorable for disease development.
Use the higher rate and shorter interval when disease pressure is high.
Bean forage, bean hay, pea vines, and pea hay maybe fed no sooner than 14 days after last application.
Headline SC can be used with adjuvants in edible-podded legume vegetables. See Additives and Tank Mixing
Information and Mixing Order sections for more details.
Resistance Management. To limit development of resistance, DO NOT apply more than 0.29 lb ai pyraclostrobin
(18 ﬂ ozs of Headline SC) per acre per year.
DO NOT make more than two (2) sequential Headline SC applications before alternating to a labeled non-Group 11
fungicide with a different mode of action.

23
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Grass Grown
for Seed
Rust
Puccinia recondita,
P. graminis
Suppression Only:
Powdery mildew
Erysiphe graminis
6 to 12 2 24
(0.39 lb
ai/acre)
14
Application Directions. Begin Headline SC applications prior to disease development. Apply again 14 to 21 days
later.
Use the higher rate and shorter interval when disease pressure is high.
DO NOT graze or feed forage or hay to livestock within 27 days of last application.
Resistance Management. To limit development of resistance, DO NOT apply more than 0.39 lb ai pyraclostrobin
(24 ﬂ ozs Headline SC) per acre per year.
DO NOT make more than two (2) sequential Headline SC applications before alternating to a labeled non-Group 11
fungicide with a different mode of action.
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Mint Leaf spot
Ramularia spp.,
Alternaria spp.,
Phoma spp.
Powdery mildew
Erysiphe spp.
Rust
Puccinia spp.
9 to 12 2 48
(0.78 lb
ai/acre)
14
Application Directions. Begin Headline SC applications prior to disease development and continue on a 7- to
14-day interval if conditions are favorable for disease development.
Use the higher rate and shorter interval when disease pressure is high.
Headline SC can be used with adjuvants in mint. See Additives and Tank Mixing Information and Mixing Order
sections for more details.
Resistance Management. To limit development of resistance, DO NOT apply more than 0.78 lb ai pyraclostrobin
(48 ﬂ ozs Headline SC) per acre per year.
DO NOT make more than two (2) sequential Headline SC applications before alternating to a labeled non-Group 11
fungicide with a different mode of action.

24
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Oats Crown rust
Puccinia coronata
Helminthosporium leaf spot
Drechslera avenae
Leaf blotch
Pyrenophora avenae
Leaf rust
Puccinia spp.
Septoria blotch and stem rot
Septoria avenae,
Phaeosphaeria avenaria,
Stagnospora avenae
Spot blotch
Bipolaris spp.
Stem rust
Puccinia graminis
6 to 9* 2 18
(0.29 lb
ai/acre)
Apply no later
than the beginning
of ﬂowering
(Feekes 10.5,
Zadok’s 59)
Application Directions. Begin Headline SC applications prior to disease development. To maximize yields in cere-
als, protect the ﬂag leaf. Apply Headline SC immediately after ﬂag-leaf emergence for optimum results.
Headline SC does not control Fusarium head blight (head scab) or prevent reductions in grain quality that can result
from this disease. When head blight is a concern, manage this disease with fungicides that are labeled for and effective
in managing this disease, and with cultural practices like crop rotation and plowing to reduce crop residues that serve
as an inoculum source.
DO NOT harvest oat hay or feed green-chopped oats within 14 days of last application.
Resistance Management. To limit development of resistance, DO NOT apply more than 0.29 lb ai pyraclostrobin
(18 ﬂ ozs Headline SC) per acre per year.
DO NOT make more than two (2) sequential Headline SC applications before alternating to a labeled non-Group 11
fungicide with a different mode of action.
*
 For early season control of leaf blotch, Septoria blotch and stem rot, and spot blotch when conditions favor disease
development, apply 3 to 6 ﬂ ozs per acre of Headline SC either in combination with a herbicide application or when
conditions favor disease development. When the 3 to 6 ﬂ ozs early season application rate is used, a second applica-
tion of Headline SC may be required to protect the emerged ﬂag leaf. Environmental conditions for disease or current
disease pressure at the time of ﬂag-leaf emergence should be used to determine the Headline SC rate for the sec-
ond application. For high disease pressure, use the higher rate of Headline SC. Early season control is not registered
for use in California.

25
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year*
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Oilseed Crops
Flax seed
Pasmo
Septoria linicola
6 to 12 2 24
(0.39 lb
ai/acre)
21
Rapeseed Blackleg
Leptosphaeria maculans
Blackspot
Alternaria spp.
Sunﬂower Alternaria leaf spot
Alternaria spp.
Cercospora leaf spot
Cercospora helianthi
Downy mildew
Plasmopara halstedii
Powdery mildew
Erysiphe cichoracearum
Rust
Puccinia helianthi,
Uromyces spp.
Septoria leaf spot
Septoria spp.
White rust
Albugo tragopogonis
Application Directions. Begin Headline SC applications prior to disease development and continue on a 7- to
14-day interval if conditions are favorable for disease development.
Flax seed. Apply Headline SC at mid-ﬂowering (7 to 10 days after ﬂower initiation). Make a second application 7 to
10 days later if disease persists or if weather conditions are favorable for disease development.
Rapeseed. For control of blackleg , apply Headline SC at 2- to 4-leaf stage. For control of blackspot , apply
 Headline SC at early pod development. A second application 7 to 10 days later can be made if disease persists or if
weather conditions are favorable for disease development.
Use the higher rate and shorter interval when disease pressure is high.
Headline SC can be used with adjuvants in oilseed crops. See Additives and Tank Mixing Information and
 Mixing Order sections for more details.
No livestock feeding restrictions.
Resistance Management. To limit development of resistance, DO NOT apply more than 0.39 lb ai pyraclostrobin
(24 ﬂ ozs Headline SC) per acre per year.
DO NOT make more than two (2) sequential Headline SC applications before alternating to a non-Group 11 fungi-
cide with a different mode of action.
*
 The maximum product rate per year for sunﬂower includes the combination of in-furrow and foliar uses.

26
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Oilseed Crops
(continued)
Borage
Calendula
Castor oil plant
Chinese
tallowtree
Crambe
Cuphea
Echium
Euphorbia
Evening
primrose
Gold of pleasure
(Camelina)
Hare’s ear
mustard
Jojoba
Lesquerella
Lunaria
Meadowfoam
Milkweed
Mustard seed
Niger seed
Oil radish
Poppy seed
Rose hip
Safﬂower
Sesame
Stokes aster
Sweet rocket
Tallowwood
Tea oil plant
Vernonia
Alternaria spp.
Septoria spp.
6 to 12 2 24
(0.39 lb
ai/acre)
21
Application Directions. Begin Headline SC applications prior to disease development and continue on a 7- to
14-day interval if conditions are favorable for disease development.
Use the higher rate and shorter interval when disease pressure is high.
Headline SC can be used with adjuvants in oilseed crops. See Additives and Tank Mixing Information and
 Mixing Order sections for more details.
No livestock feeding restrictions.
Resistance Management. To limit development of resistance, DO NOT apply more than 0.39 lb ai pyraclostrobin
(24 ﬂ ozs Headline SC) per acre per year.
DO NOT make more than two (2) sequential Headline SC applications before alternating to a non-Group 11 fungi-
cide with a different mode of action.

27
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Instructions for In-furrow Use to Aid in the Control of Soilborne Rhizoctonia in Sunﬂower
Rate per
1000 row feet
(ﬂ oz product)
Headline SC Rate
(ﬂ ozs/A)
15-inch
rows
20-inch
rows
22-inch
rows
30-inch
rows
32-inch
rows
34-inch
rows
36-inch
rows
38-inch
rows
40-inch
rows
0.1 3.5
0.2 7.0 5.2 4.7 3.5 3.3 3.2 3.0
0.3 10.5 7.8 7.1 5.2 5.0 4.8 4.5 4.3 4.0
0.4 see
footnote1 10.4 9.5 6.9 6.7 6.4 6.0 5.7 5.4
0.5 see
footnote1
see
footnote1 11.8 8.7 8.4 8.0 7.5 7.1 6.7
0.6 see
footnote1
see
footnote1
see
footnote1 10.4 10.0 9.6 9.0 8.5 8.1
0.7 see
footnote1
see
footnote1
see
footnote1
see
footnote1 11.7 11.2 10.5 10.0 9.4
0.8 see
footnote1
see
footnote1
see
footnote1
see
footnote1
see
footnote1
see
footnote1 12.0 11.4 10.8
Application Directions. Use 0.1 to 0.8 ﬂ oz of Headline SC per 1000 row feet. Apply at planting as an in-furrow
application by directing the spray into the furrow before seed is covered. Use a minimum application volume of
2.5 gallons of water per acre.
When Rhizoctonia seedling disease pressure conditions are expected to be severe or if the ﬁeld has a history of
seedling diseases, use Headline SC at a product rate per acre equivalent to 9 to 12 ﬂ ozs and/or tank mix with a
fungicide having a different mode of action.
DO NOT apply more than 12 ﬂ ozs per acre of Headline SC.
1 For 32- to 34-inch rows, use a maximum of 0.7 ﬂ oz per 1000 row feet.
For 30-inch rows, use a maximum of 0.6 ﬂ oz per 1000 row feet.
For 22-inch rows, use a maximum of 0.5 ﬂ oz per 1000 row feet.
For 20-inch rows, use a maximum of 0.4 ﬂ oz per 1000 row feet.
For 15-inch rows, use a maximum of 0.3 ﬂ oz per 1000 row feet.

28
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year*
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Peanut Early leaf spot
Cercospora arachidicola
Late leaf spot
Cercosporidium
personatum
Pepperspot
Leptosphaerulina
crassiasca
Rust
Puccinia arachidis
Web blotch
Phoma arachidicola
6 to 15
(see details
below)
24 5
(0.73 lbs
ai/acre)
14
Rhizoctonia limb rot,
Peg rot, Pod rot
Rhizoctonia solani
Sclerotium rot,
Southern stem rot,
Southern blight, and
White mold
Sclerotium rolfsii
Suppression Only:
Sclerotinia blight
Sclerotinia minor
9 to 15
Cylindrocladium black rot
Cylindrocladium crotalariae
12 to 15
Application Directions. For control of early and late leaf spot, pepperspot, rust, and web blotch , begin
Headline SC applications prior to disease development and continue on a 14- to 21-day interval. When using a 14-day
spray interval, apply Headline SC at 6 to 12 ﬂuid ounces per acre. At spray intervals between 14 and 21 days, apply
Headline SC at 9 to 15 ﬂuid ounces per acre.
For control of Rhizoctonia and Sclerotium , begin Headline SC applications prior to disease development and
continue on a 14- to 28-day interval. For intervals greater than 14 days, use 15 ﬂuid ounces per acre.
Use the higher rate and/or shorter spray interval when disease pressure is high or in ﬁelds with a history of disease.
Headline SC can be used with adjuvants in peanut; however, mixes with silicone-containing adjuvants may cause
crop injury under certain conditions. See Additives and Tank Mixing Information and Mixing Order sections for
more details.
Peanut meal can be fed. DO NOT graze or harvest for forage use.
Resistance Management. To limit development of resistance, DO NOT apply more than 0.73 lbs ai pyraclostrobin
(45 ﬂ ozs Headline SC) per acre per year.
DO NOT make more than two (2) sequential Headline SC applications before alternating to a labeled non-Group 11
fungicide with a different mode of action. In spray programs where four (4) or less fungicide applications are made in a
year, Headline SC should be alternated with at least one (1) application of a labeled non-Group 11 fungicide with a
different mode of action.
*
 The maximum product rate per year includes the combination of in-furrow and foliar uses.

29
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Instructions for In-furrow Use to Aid in the Control of Soilborne Rhizoctonia and the Suppression of
Soilborne Fusarium Species in Peanut*
Rate per
1000 row feet
(ﬂ oz product)
Headline SC Rate
(ﬂ ozs/A)
15-inch
rows
20-inch
rows
22-inch
rows
30-inch
rows
32-inch
rows
34-inch
rows
36-inch
rows
38-inch
rows
40-inch
rows
0.1 3.5
0.2 7.0 5.2 4.7 3.5 3.3 3.2 3.0
0.3 10.5 7.8 7.1 5.2 5.0 4.8 4.5 4.3 4.0
0.4 see
footnote1 10.4 9.5 6.9 6.7 6.4 6.0 5.7 5.4
0.5 see
footnote1
see
footnote1 11.8 8.7 8.4 8.0 7.5 7.1 6.7
0.6 see
footnote1
see
footnote1
see
footnote1 10.4 10.0 9.6 9.0 8.5 8.1
0.7 see
footnote1
see
footnote1
see
footnote1
see
footnote1 11.7 11.2 10.5 10.0 9.4
0.8 see
footnote1
see
footnote1
see
footnote1
see
footnote1
see
footnote1
see
footnote1 12.0 11.4 10.8
Application Directions. Use 0.1 to 0.8 ﬂ oz of Headline SC per 1000 row feet. Apply at planting as an in-furrow
application by directing the spray into the furrow before seed is covered. Use a minimum application volume of
2.5 gallons of water per acre.
When Rhizoctonia or Fusarium seedling disease pressure conditions are expected to be severe or if the ﬁeld has a
history of seedling diseases, use Headline SC at a product rate per acre equivalent to 9 to 12 ﬂ ozs and/or tank mix
with a fungicide having a different mode of action.
DO NOT apply more than 12 ﬂ ozs per acre of Headline SC for peanut in-furrow use.
*
 Not for in-furrow use in California.
1 For 32- to 34-inch rows, use a maximum of 0.7 ﬂ oz per 1000 row feet.
For 30-inch rows, use a maximum of 0.6 ﬂ oz per 1000 row feet.
For 22-inch rows, use a maximum of 0.5 ﬂ oz per 1000 row feet.
For 20-inch rows, use a maximum of 0.4 ﬂ oz per 1000 row feet.
For 15-inch rows, use a maximum of 0.3 ﬂ oz per 1000 row feet.

30
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Pecan Pecan scab
Cladosporium caryigenum
6 to 7 2 28
(0.46 lb
ai/acre)
14
Application Directions. Begin Headline SC applications prior to disease development and continue on a 14-day
interval. For optimum performance, apply Headline SC early in the spray program (e.g. prepollination and ﬁrst cover).
Resistance Management. To limit development of resistance, DO NOT apply more than 0.46 lb ai pyraclostrobin
(28 ﬂ ozs Headline SC) per acre per year.
DO NOT make more than two (2) sequential Headline SC applications before alternating to a labeled non-Group 11
fungicide with a different mode of action.

31
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year*
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Potato Black dot
Colletotrichum coccodes
Early blight
Alternaria solani
6 to 9 1 72
(1.18 lbs
ai/acre)
3
Late blight
Phytophthora infestans
Powdery mildew
Erysiphe spp.,
Leveillula taurica
Suppression Only:
White mold
Sclerotinia sclerotiorum
6 to 12
Application Directions. Begin Headline SC applications at 7- to 14-day intervals prior to disease development. The
low rate and longer interval can be used early season prior to the observance of symptoms and when disease pressure
is low. For control of late blight , follow Headline SC application with a labeled non-Group 11 fungicide with a dif-
ferent mode of action 5 to 7 days later.
Use the higher rates and shorter intervals once disease has been conﬁrmed in your area or weather conditions are
favorable to disease development.
No livestock feeding restrictions.
Resistance Management. To limit development of resistance, DO NOT apply more than 1.18 lbs ai pyraclostrobin
(72 ﬂ ozs Headline SC) per acre per year.
DO NOT make more than one (1) Headline SC application before alternating to a labeled non-Group 11 fungicide
with a different mode of action.
*
 The maximum product rate per year includes the combination of in-furrow and foliar uses.
In-furrow Use to Aid in the Control of Soilborne Rhizoctonia in Potatoes
Use 0.4 to 0.8 ﬂ oz of Headline SC per 1000 row feet. For applications on 32-inch or 34-inch rows, the maximum appli-
cation rate is 0.73 ﬂ oz/1000 row feet. Apply at planting as an in-furrow spray by directing spray pattern to uniformly
cover seed pieces and surrounding soil. The spray pattern must be a 4- to 8-inch band applied to the seed piece prior to
being covered with soil.
When Rhizoctonia disease pressure conditions are expected to be severe or if the ﬁeld has a history of Rhizoctonia infes-
tations, use Headline SC at 0.6 to 0.8 ﬂ oz per 1000 row feet and/or tank mix with a fungicide having a different mode
of action.
DO NOT apply more than 12 ﬂ ozs per acre of Headline SC.
Use a minimum volume of application of 5 gallons of water per acre.
Headline SC Rate
per 1000 row feet
(ﬂ oz product)
Headline SC Rate
(ﬂ ozs/A)
32-inch rows 34-inch rows 36-inch rows 38-inch rows 40-inch rows
0.4 6.7 6.4 6.0 5.7 5.4
0.6 10.0 9.6 9.0 8.6 8.1
0.8 see footnote 1 see footnote1 12.0 11.4 10.8
1 For 32-inch or 34-inch rows, use a maximum of 0.73 ﬂ oz per 1000 row feet.

32
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Rye Leaf rust
Puccinia recondita
Leaf spot
Pyrenophora spp.
Powdery mildew
Erysiphe graminis
Septoria leaf and
glume blotch
Septoria spp.,
Stagonospora spp.
Stem rust
Puccinia graminis
Stripe rust
Puccinia striiformis
6 to 9* 2 18
(0.29 lb
ai/acre)
Apply no later
than 50% head
emergence
(Feekes 10.3,
Zadok’s 55)
Application Directions. Begin Headline SC applications prior to disease development. To maximize yields in cere-
als, protect the ﬂag leaf. Apply Headline SC immediately after ﬂag-leaf emergence for optimum results.
Headline SC does not control Fusarium head blight (head scab) or prevent the reductions in grain quality that can
result from this disease. When head blight is a concern, manage this disease with fungicides that are labeled for and
effective in managing this disease, and with cultural practices like crop rotation and plowing to reduce crop residues
that serve as an inoculum source.
No livestock feeding restrictions.
Resistance Management. To limit development of resistance, DO NOT apply more than 0.29 lb ai pyraclostrobin
(18 ﬂ ozs Headline SC) per acre per year.
DO NOT make more than two (2) sequential Headline SC applications before alternating to a labeled non-Group 11
fungicide with a different mode of action.
*
 For early season control of leaf spot and Septoria leaf and glume blotch when conditions favor disease development,
apply 3 to 6 ﬂ ozs per acre of Headline SC either in combination with a herbicide application or when conditions
favor disease development. When the 3 to 6 ﬂ ozs early season application rate is used, a second application of
 Headline SC may be required to protect the emerged ﬂag leaf. Environmental conditions for disease or current dis-
ease pressure at the time of ﬂag-leaf emergence should be used to determine the Headline SC rate for the second
application. For high disease pressure, use the higher rate of Headline SC. Early season control is not registered for
use in California.

33
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Sorghum Anthracnose
Colletotrichum
graminocola
Gray leaf spot
Cercospora spp.
Northern leaf blight
Exserohilum turcicum
Rust
Puccinia spp.
Southern leaf blight
Bipolaris spp.
6 to 12 1 12
(0.20 lb
ai/acre)
Apply no later
than 25%
ﬂowering
Application Directions. Begin Headline SC applications prior to disease development.
Use the higher rate when disease pressure is high.
Under high disease pressure for Northern leaf blight and Southern leaf blight, apply 9 to 12 ﬂ ozs per acre.
Resistance Management. To limit development of resistance, DO NOT apply more than 0.20 lb ai/acre
 pyraclostrobin (12 ﬂ ozs Headline SC) per acre per year.
DO NOT make more than one (1) Headline SC application per year. If additional fungicide applications are needed,
use a labeled non-Group 11 fungicide with a different mode of action.

34
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year*
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Soybean Alternaria leaf spot
Alternaria spp.
Anthracnose
Colletotrichum truncatum
Asian soybean rust
Phakopsora pachyrhizi
Brown spot
Septoria glycines
Cercospora blight
Cercospora kikuchii
Frogeye leaf spot
Cercospora sojina
Pod and stem blight
Diaporthe phaseolorum
Rhizoctonia aerial blight
Rhizoctonia solani
6 to 12 2 24
(0.39 lb
ai/acre)
21
Suppression Only:
Southern blight
Sclerotium rolfsii
12
Application Directions. Begin Headline SC applications prior to disease development and continue on a 7- to
14-day interval if conditions are favorable for disease development.
Use the higher rate and shorter interval when disease pressure is high.
For control of soybean rust, apply Headline SC prior to infection.
Headline SC can be used with adjuvants in soybeans. See Additives and Tank Mixing Information and Mixing
Order sections for more details.
Soybean forage can be fed no sooner than 14 days after last application.
Soybean hay can be fed no sooner than 21 days after last treatment.
Resistance Management. To limit development of resistance, DO NOT apply more than 0.39 lb ai pyraclostrobin
(24 ﬂ ozs Headline SC) per acre per year.
DO NOT make more than two (2) sequential Headline SC applications before alternating to a labeled non-Group 11
fungicide with a different mode of action.
*
 The maximum product rate per year includes the combination of in-furrow and foliar uses.

35
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Instructions for In-furrow Use to Aid in the Control of Soilborne Rhizoctonia and the Suppression of
Soilborne Fusarium Species in Soybean*
Rate per
1000 row feet
(ﬂ oz product)
Headline SC Rate
(ﬂ ozs/A)
15-inch
rows
20-inch
rows
22-inch
rows
30-inch
rows
32-inch
rows
34-inch
rows
36-inch
rows
38-inch
rows
40-inch
rows
0.1 3.5
0.2 7.0 5.2 4.7 3.5 3.3 3.2 3.0
0.3 10.5 7.8 7.1 5.2 5.0 4.8 4.5 4.3 4.0
0.4 see
footnote1 10.4 9.5 6.9 6.7 6.4 6.0 5.7 5.4
0.5 see
footnote1
see
footnote1 11.8 8.7 8.4 8.0 7.5 7.1 6.7
0.6 see
footnote1
see
footnote1
see
footnote1 10.4 10.0 9.6 9.0 8.5 8.1
0.7 see
footnote1
see
footnote1
see
footnote1
see
footnote1 11.7 11.2 10.5 10.0 9.4
0.8 see
footnote1
see
footnote1
see
footnote1
see
footnote1
see
footnote1
see
footnote1 12.0 11.4 10.8
Application Directions. Use 0.1 to 0.8 ﬂ oz of Headline SC per 1000 row feet. Apply at planting as an in-furrow
application by directing the spray into the furrow before seed is covered. Use a minimum application volume of
2.5 gallons of water per acre.
When Rhizoctonia or Fusarium seedling disease pressure conditions are expected to be severe or if the ﬁeld has a
history of seedling diseases, use Headline SC at a product rate per acre equivalent to 9 to 12 ﬂ ozs and/or tank mix
with a fungicide having a different mode of action.
DO NOT apply more than 12 ﬂ ozs per acre in-furrow of Headline SC.
*
 Not for in-furrow use in California.
1 For 32- to 34-inch rows, use a maximum of 0.7 ﬂ oz per 1000 row feet.
For 30-inch rows, use a maximum of 0.6 ﬂ oz per 1000 row feet.
For 22-inch rows, use a maximum of 0.5 ﬂ oz per 1000 row feet.
For 20-inch rows, use a maximum of 0.4 ﬂ oz per 1000 row feet.
For 15-inch rows, use a maximum of 0.3 ﬂ oz per 1000 row feet.

36
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Succulent
Shelled Peas
and Beans
Pigeon pea
Vigna spp.
Black-eyed pea
Cowpea
Southern pea
Pisum spp.
Broad bean
English pea
Garden pea
Green pea
Phaseolus spp.
Lima bean,
green
Alternaria leaf and pod spot
Alternaria spp.
Anthracnose
Colletotrichum spp.
Ascochyta blight
Phoma exigua,
Ascochyta spp.
Asian soybean rust
Phakopsora pachyrhizi
Cercospora leaf spot
Cercospora spp.
Downy mildew
Phytophthora nicotianae,
P. phaseoli
Mycosphaerella blight
Mycosphaerella spp.
Powdery mildew
Erysiphe polygoni
Rust
Uromyces appendiculatus
6 to 9 2 18
(0.29 lb
ai/acre)
7
Application Directions. Begin Headline SC applications prior to disease development and continue on a 7- to
14-day interval if conditions are favorable for disease development.
Use the higher rate and shorter interval when disease pressure is high.
Bean forage, bean hay, pea vines, and pea hay may be fed no sooner than 14 days after last application.
Headline SC can be used with adjuvants in succulent shelled peas and beans. See Additives and Tank Mixing
Information and Mixing Order sections for more details.
Resistance Management. To limit development of resistance, DO NOT apply more than 0.29 lb ai pyraclostrobin
(18 ﬂ ozs Headline SC) per acre per year.
DO NOT make more than two (2) sequential Headline SC applications before alternating to a labeled non-Group 11
fungicide with a different mode of action.

37
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year*
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Sugar Beet
(roots and
tops)
Cercospora leaf spot
Cercospora beticola
Powdery mildew
Erysiphe betae
9 to 12 2 48
(0.78 lb
ai/acre)
7
Application Directions. Begin Headline SC applications prior to disease development and continue on a 14-day
interval.
Use the higher rate when disease pressure is high.
Headline SC applications will aid in the control of Rhizoctonia stem canker and crown rot.
In sugar beet, Headline SC can be combined with low rates of crop oil concentrate (COC), methylated seed oil (MSO),
and nonionic surfactant (NIS) adjuvants. DO NOT use silicone-containing adjuvants. Some combinations and rates
may result in temporary crop injury.
Headline SC Tank Mixes. Headline SC can be tank mixed with herbicides such as Poast
® herbicide, Select®
herbicide, Assure® II herbicide or Prism® herbicide for postemergence control of grasses in sugar beet. DO NOT
use silicone-based adjuvants in such combinations. Headline SC tank mix combinations can include COC or MSO;
however, crop injury may result. The level of injury tends to increase with increasing rates of COC or MSO.
See Additives and Tank Mixing Information and Mixing Order sections for more details.
No livestock feeding restrictions.
Resistance Management. To limit development of resistance, DO NOT apply more than 0.78 lb ai pyraclostrobin
(48 ﬂ ozs Headline SC) per acre per year.
DO NOT make more than one (1) Headline SC application before the 4-leaf stage of plant growth. After the 4-leaf
stage of plant growth, DO NOT make more than (1) Headline SC application before alternating to a non-Group 11
fungicide with a different mode of action.
*
 The maximum product rate per year includes the combination of in-furrow and foliar uses.

38
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Instructions for In-furrow Use to Aid in the Control of Soilborne Rhizoctonia in Sugar Beet
Rate per
1000 row feet
(ﬂ oz product)
Headline SC Rate
(ﬂ ozs/A)
15-inch
rows
20-inch
rows
22-inch
rows
30-inch
rows
32-inch
rows
34-inch
rows
36-inch
rows
38-inch
rows
40-inch
rows
0.1 3.5
0.2 7.0 5.2 4.7 3.5 3.3 3.2 3.0
0.3 10.5 7.8 7.1 5.2 5.0 4.8 4.5 4.3 4.0
0.4 see
footnote1 10.4 9.5 6.9 6.7 6.4 6.0 5.7 5.4
0.5 see
footnote1
see
footnote1 11.8 8.7 8.4 8.0 7.5 7.1 6.7
0.6 see
footnote1
see
footnote1
see
footnote1 10.4 10.0 9.6 9.0 8.5 8.1
0.7 see
footnote1
see
footnote1
see
footnote1
see
footnote1 11.7 11.2 10.5 10.0 9.4
0.8 see
footnote1
see
footnote1
see
footnote1
see
footnote1
see
footnote1
see
footnote1 12.0 11.4 10.8
Application Directions. Use 0.1 to 0.8 ﬂ oz of Headline SC per 1000 row feet. Apply at planting as an in-furrow
application by directing the spray into the furrow before seed is covered. Use a minimum application volume of
2.5 gallons of water per acre.
When Rhizoctonia seedling disease pressure conditions are expected to be severe or if the ﬁeld has a history of
seedling diseases, use Headline SC at a product rate per acre equivalent to 9 to 12 ﬂ ozs and/or tank mix with a
fungicide having a different mode of action.
DO NOT apply more than 12 ﬂ ozs per acre of Headline SC.
1 For 32- to 34-inch rows, use a maximum of 0.7 ﬂ oz per 1000 row feet.
For 30-inch rows, use a maximum of 0.6 ﬂ oz per 1000 row feet.
For 22-inch rows, use a maximum of 0.5 ﬂ oz per 1000 row feet.
For 20-inch rows, use a maximum of 0.4 ﬂ oz per 1000 row feet.
For 15-inch rows, use a maximum of 0.3 ﬂ oz per 1000 row feet.

39
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Sugarcane* Brown Rust
Puccinia melanocephala
Orange Rust
Puccinia kuehnii
9 to 12 2 48
(0.78)
14
Application Directions. For optimal disease control, begin applications of Headline SC prior to disease develop-
ment and continue on a 14 to 28 day interval if conditions are conducive for disease development. Use the higher rate
and shorter interval when disease pressure is high.
Resistance Management. To limit the potential for development of resistance, DO NOT apply more than 48 ozs of
Headline SC per acre per year. DO NOT make more than two (2) sequential applications of Headline SC before
alternating to a labeled non-Group 11 fungicide with a different mode of action.
*
 Not for use in California.

40
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year*
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Tuberous and
Corm
Vegetables
Subgroup
Arracacha
Arrowroot
Chinese
artichoke
Jerusalem
artichoke
Cassava (bitter
and sweet)
Chayote (root)
Chufa
Dasheen
Edible canna
Ginger
Leren
Sweet potato
Tanier
True yam
Turmeric
Yam bean
Downy mildew
Plasmopara spp.
Leaf spot
Cercospora spp.,
Alternaria spp.
Powdery mildew
Erysiphae spp.,
Leveillula taurica
Rust
Uromyces spp.,
Puccinia spp.
6 to 12 1 72
(1.18 lbs
ai/acre)
3
Potato Black dot
Colletotrichum coccodes
Early blight
Alternaria solani
6 to 9
Late blight
Phytophthora infestans
Powdery mildew
Erysiphe spp.,
Leveillula taurica
Suppression Only:
White mold
Sclerotinia sclerotiorum
6 to 12
Application Directions. Begin Headline SC applications at 7- to 14-day intervals prior to disease development. The
low rate and longer interval can be used early season prior to the observance of symptoms and when disease pressure
is low. For control of late blight , follow Headline SC application with a labeled fungicide with a different mode of
action 5 to 7 days later.
Use the higher rates and shorter intervals once disease has been conﬁrmed in your area or if weather conditions are
favorable for disease development.
No livestock feeding restrictions.
Resistance Management. To limit development of resistance, DO NOT apply more than 1.18 lbs ai pyraclostrobin
(72 ﬂ ozs Headline SC) per acre per year.
DO NOT make more than one (1) Headline SC application before alternating to a labeled non-Group 11 fungicide
with a different mode of action.
*
 The maximum product rate per year includes the combination of in-furrow and foliar uses. (For above-listed crops,
in-furrow use is permitted in potato only. )

41
In-furrow Use to Aid in the Control of Soilborne Rhizoctonia in Potatoes
Use 0.4 to 0.8 ﬂ oz of Headline® SC fungicide per 1000 row feet. For applications on 32-inch or 34-inch rows, the
maximum application rate is 0.73 ﬂ oz/1000 row feet. Apply at planting as an in-furrow spray by directing spray pattern to
uniformly cover seed pieces and surrounding soil. The spray pattern must be a 4- to 8-inch band applied to the seed
piece prior to being covered with soil.
When Rhizoctonia disease pressure conditions are expected to be severe or if the ﬁeld has a history of Rhizoctonia infes-
tations, use Headline SC at 0.6 to 0.8 ﬂ oz per 1000 row feet and/or tank mix with a fungicide having a different mode
of action.
DO NOT apply more than 12 ﬂ ozs per acre of Headline SC.
Use a minimum volume of application of 5 gallons of water per acre.
Headline SC Rate
per 1000 row feet
(ﬂ oz product)
Headline SC Rate
(ﬂ ozs/A)
32-inch rows 34-inch rows 36-inch rows 38-inch rows 40-inch rows
0.4 6.7 6.4 6.0 5.7 5.4
0.6 10.0 9.6 9.0 8.6 8.1
0.8 see footnote 1 see footnote1 12.0 11.4 10.8
1 For 32-inch or 34-inch rows, use a maximum of 0.73 ﬂ oz per 1000 row feet.

42
Table 2. Headline ® SC fungicide Crop-speciﬁc Requirements (continued)
Crop Target Disease
Product
Rate per
Application
(ﬂ ozs/A)
Maximum
Number of
Sequential Foliar
Applications
Maximum
Product Rate
per Year
(ﬂ ozs/A)
Minimum Time
from Application
to Harvest
(PHI) (days)
Wheat and
Triticale
Black point
Kernel smudge
Alternaria spp.,
Helminthosporium spp.
Leaf rust
Puccinia triticina
Powdery mildew
Erysiphe graminis f. sp.,
tritici
Septoria leaf and
glume blotch
Septoria spp.,
Stagonospora spp.
Spot blotch
Cochliobolus sativus
Stem rust
Puccinia graminis f. sp.,
tritici
Stripe rust
Puccinia striiformis f. sp.,
tritici
Tan spot
Yellow leaf spot
Pyrenophora spp.
6 to 9* 2 18
(0.29 lb
ai/acre)
Apply no later
than the beginning
of ﬂowering
(Feekes 10.5,
Zadok’s 59)
Application Directions. Begin Headline SC applications prior to disease development. To maximize yields in cere-
als, protect the ﬂag leaf. Apply Headline SC immediately after ﬂag-leaf emergence for optimum results.
Headline SC does not control Fusarium head blight (head scab) or prevent the reductions in grain quality that can
result from this disease. When head blight is a concern, manage this disease with fungicides that are labeled for and
effective in managing this disease, and with cultural practices like crop rotation and plowing to reduce crop residues
that serve as an inoculum source.
DO NOT harvest wheat hay or feed green-chopped wheat within 14 days after last application.
Resistance Management. To limit development of resistance, DO NOT apply more than 0.29 lb ai pyraclostrobin
(18 ﬂ ozs Headline SC) per acre per year.
DO NOT make more than two (2) sequential Headline SC applications before alternating to a labeled non-Group 11
fungicide with a different mode of action.
*
 For early season control of tan spot, Septoria leaf and glume blotch, and spot blotch when conditions favor disease
development, apply 3 to 6 ﬂ ozs per acre of Headline SC either in combination with a herbicide application or when
conditions favor disease development. When the 3 to 6 ﬂ ozs early season application rate is used, a second applica-
tion of Headline SC may be required to protect the emerged ﬂag leaf. Environmental conditions for disease or current
disease pressure at the time of ﬂag-leaf emergence should be used to determine the Headline SC rate for the sec-
ond application. For high disease pressure, use the higher rate of Headline SC. Early season control is not registered
for use in California.

43
Conditions of Sale and Warranty
The Directions For Use of this product reﬂect the
 opinion of experts based on ﬁeld use and tests. The
 directions are believed to be reliable and must be
followed carefully. However, it is impossible to eliminate
all risks inherently associated with the use of this
product. Crop injury, ineffectiveness or other unintended
consequences may result because of such factors as
weather conditions, presence of other materials, or use
of the product in a manner inconsistent with its labeling,
all of which are beyond the control of BASF Agricultural
Solutions US LLC (“BASF”) or the Seller. To the extent
consistent with applicable law, all such risks shall be
assumed by the Buyer.
BASF warrants that this product conforms to the
chemical description on the label and is reasonably ﬁt for
the purposes referred to in the Directions For Use ,
subject to the inherent risks, referred to above.
TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BASF MAKES NO OTHER EXPRESS OR
IMPLIED WARRANTY OF FITNESS OR
 MERCHANTABILITY OR ANY OTHER EXPRESS OR
IMPLIED WARRANTY.
TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BUYER’S EXCLUSIVE REMEDY AND BASF’S
EXCLUSIVE LIABILITY, WHETHER IN CONTRACT,
TORT, NEGLIGENCE, STRICT LIABILITY, OR
 OTHERWISE, SHALL BE LIMITED TO REPAYMENT
OF THE PURCHASE PRICE OF THE PRODUCT.
TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BASF AND THE SELLER DISCLAIM ANY
 LIABILITY FOR CONSEQUENTIAL, EXEMPLARY,
SPECIAL OR INDIRECT DAMAGES RESULTING
FROM THE USE OR HANDLING OF THIS
PRODUCT.
BASF and the Seller offer this product, and the Buyer
and User accept it, subject to the foregoing Conditions
of Sale and Warranty which may be varied only by
 agreement in writing signed by a duly authorized
representative of BASF.
1108
© 2026 BASF Agricultural Solutions US LLC
All rights reserved.
007969-00289.20201214e.NVA 2020-04-340-0211
Supersedes: NVA 2021-04-340-0062
BASF Agricultural Solutions US LLC
2 TW Alexander Drive
Research Triangle Park, NC 27713
Cabrio, Headline, Poast, and Pristine are registered
trademarks of BASF.
Assure and Prism are registered trademarks of
E.I. duPont de Nemours and Company.
Select is a registered trademark of Arysta Life Science
North America Corporation.