crop-chem-docs/corpus/epa_ppls/7969-398.md

# Segment® II Herbicide

- EPA Reg No: **7969-398**
- Registrant: BASF AGRICULTURAL SOLUTIONS US, LLC
- Signal word: Warning
- Active ingredients: Sethoxydim (18%)
- Label accepted: 2024-09-12
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/007969-00398-20240912.pdf

---
September 12, 2024 
 
Christine Keating 
Team Leader, Federal Regulations Agricultural Solutions 
BASF Corporation 
26 Davis Drive, PO Box 13528 
Research Triangle Park, NC 27709 
 
Subject: Label Amendment - Registration Review Mitigation for Sethoxydim 
 Product Name: Segment II Herbicide 
 EPA Registration Number: 7969-398 
 Application Date: July 13, 2020 
Decision Number: 569122 
 
Dear Christine Keating: 
 
The Agency, in accordance with the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), 
as amended, has completed reviewing all the information submitted with your application to 
support the Registration Review of the above referenced product in connection with the 
Sethoxydim Interim Decision, and has concluded that your submission is acceptable. The label 
referred to above, submitted in connection with registration under FIFRA, as amended, is 
acceptable. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please 
be aware that the website becomes labeling under the Federal Insecticide, Fungicide, and 
Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the 
product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 
40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In 
addition, regardless of whether a website is referenced on your product’s label, claims made on 
the website may not substantially differ from those claims approved through the registration 
process. Therefore, should the Agency find or if it is brought to our attention that a website 
contains false or misleading statements or claims substantially differing from the EPA approved 
registration, the website will be referred to the EPA’s Office of Enforcement and Compliance 
Assurance. 
 
A stamped copy of your labeling is enclosed for your records. This labeling supersedes 
all previously accepted labeling and must be used at your next label printing. You must

Page 2 of 2 
EPA Reg. No. 7969-398 
Decision No. 569122 
 
submit one copy of the final printed labeling before you release the product for 
shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may 
distribute or sell this product under the previously approved labeling for 12 months 
from the date of this letter. After 12 months, you may only distribute or sell this 
product if it bears this new revised labeling or subsequently approved labeling. “To 
distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation 
at 40 CFR 152.3. 
 
If you have any questions about this letter, please contact Concepción Rodríguez by phone at 
202-566-0820, or via email at rodriguez.concepcion@epa.gov. 
 
 Sincerely, 
 
 
 Linda Arrington, Branch Chief 
 Risk Management and Implementation Branch 4 
 Pesticide Re-Evaluation Division 
 Office of Pesticide Programs 
 
 
 
ENCLOSURE: Stamped label

Sep 12, 2024
7969-398

2
Precautionary Statements
Hazards to Humans and Domestic Animals
WARNING. Causes substantial but temporary eye injury. 
Causes skin irritation. Harmful if absorbed through skin or 
swallowed. DO NOT get in eyes, on skin, or on clothing.
Personal Protective Equipment (PPE)
Applicators and other handlers must wear:
• Coveralls over short-sleeved shirt and short pants
• Chemical resistant gloves made out of barrier laminate, 
nitrile rubber ≥ 14 mils, neoprene rubber ≥ 14 mils, or 
viton ≥ 14 mils
• Chemical-resistant footwear plus socks
• Protective eyewear
• Chemical-resistant apron when cleaning equipment, 
 mixing, and loading
Discard clothing and other absorbent materials that have 
been drenched or heavily contaminated with this product’s 
concentrate. DO NOT reuse them. Follow manufacturer’s 
instructions for cleaning and maintaining PPE. If no such 
instructions for washables exist, use detergent and hot 
water. Keep and wash PPE separately from other laundry.
Engineering Controls Statement
When handlers use closed systems, enclosed cabs, or air-
craft in a manner that meets the requirements listed in the 
Worker Protection Standard (WPS) for agricultural pesti-
cides [40 CFR 170.240(d)(4-6)], the handler PPE 
requirements may be reduced or modified as specified in 
the WPS.
USER SAFETY RECOMMENDATIONS
Users should:
• Wash hands before eating, drinking, chewing gum, 
using tobacco, or using the toilet.
• Remove clothing/PPE immediately if pesticide gets 
inside. Then wash thoroughly and put on clean clothing.
• Remove PPE immediately after handling this product. 
Wash the outside of gloves before removing. As soon 
as possible, wash thoroughly and change into clean 
clothing.
Environmental Hazards
This product is toxic to aquatic organisms. For terrestrial 
uses, DO NOT apply directly to water, or to areas where 
surface water is present, or to intertidal areas below the 
mean high water mark. DO NOT contaminate water when 
disposing of equipment washwater or rinsate.
Nontarget Organism Advisory: This product is toxic to 
plants and may adversely impact the forage and habitat of 
nontarget organisms, including pollinators, in areas adja-
cent to the treated site. Protect the forage and habitat of 
nontarget organisms by following label directions intended 
to minimize spray drift.
Endangered Species Concerns
NOTE: The use of any pesticide in a manner that may kill 
or otherwise harm an endangered species or adversely 
modify their habitat is a violation of federal law. This pesti-
cide is toxic to vascular plants and should be used strictly 
in accordance with drift precautions on this label to mini-
mize off-site exposures.
FIRST AID
If in eyes
• Hold eyes open and rinse slowly and gently with water for 15 to 20 minutes.
• Remove contact lenses, if present, after first 5 minutes; then continue rinsing eyes.
• Call a poison control center or doctor for treatment advice.
If on skin or clothing
• Take off contaminated clothing.
• Rinse skin immediately with plenty of water for 15 to 20 minutes.
• Call a poison control center or doctor for treatment advice.
If swallowed
• Immediately call a poison control center or doctor for treatment advice.
• DO NOT give any liquid to the person.
• DO NOT induce vomiting unless told to do so by a poison control center or doctor.
• DO NOT give anything by mouth to an unconscious person.
If inhaled
• Move person to fresh air.
• If person is not breathing, call 911 or an ambulance; then give artificial respiration, 
 preferably by mouth to mouth, if possible.
• Call a poison control center or doctor for further treatment advice.
HOTLINE NUMBER
Have the product container or label with you when calling a poison control center or doctor or going for treatment. In 
case of medical emergency involving this product, call BASF Corporation at 1-800-832-HELP (4357) or dial 911.
NOTE TO PHYSICIAN
Contains petroleum distillate. Probable mucosal damage may contraindicate the use of gastric lavage. Vomiting may 
cause aspiration pneumonia.

3
Physical and Chemical Hazards
COMBUSTIBLE. DO NOT use or store near heat or open 
flame.
Directions For Use
It is a violation of federal law to use this product in a man-
ner inconsistent with its labeling. This label must be in 
possession of the user at the time of herbicide application.
DO NOT apply this product in a way that will contact 
workers or other persons, either directly or through drift. 
Only protected handlers may be in the area during applica-
tion. For requirements specific to your state or tribe, 
consult the agency responsible for pesticide regulation.
Observe all precautions and limitations in this label and the 
labels of products used in combination with Segment
® II 
 herbicide. Use of Segment II not consistent with this 
label can result in injury to crops, animals, or persons.
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and 
with the Worker Protection Standard, 40 CFR Part 170. 
This standard contains requirements for the protection 
of agricultural workers on farms, forests, nurseries, and 
greenhouses, and handlers of agricultural pesticides. It 
contains requirements for training, decontamination, 
notification, and emergency assistance. It also contains 
specific instructions and exceptions pertaining to the 
statements on this label about personal protective 
equipment (PPE) and restricted-entry interval. The 
requirements in this box only apply to uses of this prod-
uct that are covered by the Worker Protection Standard.
DO NOT enter or allow worker entry into treated areas 
during the restricted-entry interval (REI) of 12 hours.
PPE required for early entry to treated areas that is per-
mitted under the Worker Protection Standard and that 
involves contact with anything that has been treated, 
such as plants, soil, or water is:
• Coveralls over short-sleeved shirt and short pants
• Chemical resistant gloves made out of barrier laminate, 
nitrile rubber ≥ 14 mils, neoprene rubber ≥ 14 mils, or 
viton ≥ 14 mils
• Chemical-resistant footwear plus socks
• Protective eyewear
• Chemical-resistant headgear for overhead exposure
NONAGRICULTURAL USE REQUIREMENTS
The requirements in this box apply to uses of this prod-
uct that are NOT within the scope of the Worker 
Protection Standard (WPS) for agricultural pesticides 
(40 CFR Part 170). The WPS applies when this product 
is used to produce agricultural plants on farms, forests, 
nurseries, or greenhouses.
DO NOT enter or allow others to enter treated areas 
until sprays have dried.
STORAGE AND DISPOSAL
DO NOT contaminate water, food, or feed by storage or 
disposal.
Pesticide Storage
DO NOT allow this product to freeze. DO NOT store 
below 32° F or above 100° F. Store in original container 
only, in a dry place away from heat or open flame, and 
separate from feed or foodstuffs.
Pesticide Disposal
To avoid pesticide waste, use all material in this contain-
er by application according to label directions. If 
pesticide waste cannot be avoided, offer remaining 
product to a waste disposal facility or pesticide disposal 
program (often such programs are run by state or local 
governments or by industry).
Container Handling
Nonrefillable Container. DO NOT reuse or refill this 
container. Triple rinse or pressure rinse container (or 
equivalent) promptly after emptying; then offer for recy-
cling, if available, or reconditioning, if appropriate, or 
puncture and dispose of in a sanitary landfill, or by incin-
eration, or by other procedures approved by state and 
local authorities.
Triple rinse containers small enough to shake 
 (capacity ≤ 5 gallons) as follows: Empty the remain-
ing contents into application equipment or a mix tank 
and drain for 10 seconds after the flow begins to drip. Fill 
the container 1/4 full with water and recap. Shake for 
10 seconds. Pour rinsate into application equipment or a 
mix tank, or store rinsate for later use or disposal. Drain 
for 10 seconds after the flow begins to drip. Repeat this 
procedure two more times.
Triple rinse containers too large to shake 
 (capacity > 5 gallons) as follows: Empty the remain-
ing contents into application equipment or a mix tank. 
Fill the container 1/4 full with water. Replace and tighten 
closures. Tip container on its side and roll it back and 
forth, ensuring at least one complete revolution, for 
30 seconds. Stand the container on its end and tip it 
back and forth several times. Turn the container over 
onto its other end and tip it back and forth several times. 
Empty the rinsate into application equipment or a mix 
tank, or store rinsate for later use or disposal. Repeat 
this procedure two more times.
Pressure rinse as follows: Empty the remaining con-
tents into application equipment or mix tank and 
continue to drain for 10 seconds after the flow begins to 
drip. Hold container upside down over application 
equipment or mix tank, or collect rinsate for later use or 
disposal. Insert pressure rinsing nozzle in the side of the 
container and rinse at about 40 PSI for at least 30 sec-
onds. Drain for 10 seconds after the flow begins to drip.
(continued)

4
STORAGE AND DISPOSAL (continued)
Container Handling (continued)
Refillable Container. Refill this container with pesticide 
only. DO NOT reuse this container for any other pur-
pose. Triple rinsing the container before final disposal is 
the responsibility of the person disposing of the contain-
er. Cleaning before refilling is the responsibility of the 
refiller.
Triple rinse as follows: To clean the container before 
final disposal, empty the remaining contents from this 
container into application equipment or mix tank. Fill the 
container about 10% full with water. Agitate vigorously or 
recirculate water with the pump for 2 minutes. Pour or 
pump rinsate into application equipment or rinsate col-
lection system. Repeat this rinsing procedure two more 
times.
When this container is empty, replace the cap and seal 
all openings that have been opened during use; return 
the container to the point of purchase or to a designated 
location. This container must only be refilled with a pesti-
cide product. Prior to refilling, inspect carefully for 
damage such as cracks, punctures, abrasions, worn-out 
threads and closure devices. Check for leaks after refill-
ing and before transport. DO NOT transport if this 
container is damaged or leaking. If the container is dam-
aged, or leaking, or obsolete and not returned to the 
point of purchase or to a designated location, triple rinse 
emptied container and offer for recycling, if available, or 
dispose of container in compliance with state and local 
regulations.
In Case of Emergency
In case of a spill of this product, call:
• CHEMTREC 1-800-424-9300
• BASF Corporation 1-800-832-HELP (4357)
Steps to take if this material is released into the 
 environment or spilled:
• Wear Personal Protective Equipment (PPE) and 
avoid exposure when managing a spill. (See 
 Precautionary Statements section of this label for 
required PPE.)
• Dike and contain the spill with inert, absorbent material 
(e.g., sand, earth) and transfer liquid and solid diking 
material to separate containers for disposal. Small-scale 
spills of Segment
® II herbicide (that can be cleaned up 
with a typical spill kit) may be applied to labeled sites.
• Remove contaminated clothing, and wash affected skin 
areas with soap and water. Wash clothing before reuse.
• Keep spill out of all sewers and open bodies of water.
Use Restrictions
• DO NOT use treated vegetation as pasture, hay, feed or 
forage. 
• Avoid direct or indirect contact with any desired grass 
species unless otherwise recommended on the 
 Segment II label.
• DO NOT apply Segment II with another pesticide 
where one component of the tank mix is incompatible 
with additives, surfactants or oil adjuvants.
• DO NOT use recirculating sprayers to apply Segment II.
• DO NOT apply to grasses or ornamentals under stress 
such as stress due to lack of moisture, hail damage, 
flooding, herbicide injury, mechanical injury, or widely 
fluctuating temperatures, as unsatisfactory control and 
injury may result.
• DO NOT apply through any type of irrigation equipment. 
• Avoid using Segment II with adjuvants at temperatures 
above 90° F and relative humidity is at or above 60%, or 
any time the temperature exceeds 100° F, as injury may 
result.
• Only use Segment II on centipedegrass and fine fescue. 
Application to other turfgrass species will result in unac-
ceptable injury or plant death.
Product Information
 Segment II is a postemergence herbicide for control of 
annual and perennial grass weeds in turf, ornamentals, 
nonfood, and noncrop sites listed on this label. 
 Segment II does not control sedges or broadleaf weeds. 
A program for total vegetation suppression may necessi-
tate the use of a broadleaf herbicide. 
 Segment II may be used in or around the following sites:
Ornamental
• Christmas tree and conifer nurseries and plantations
• Commercial and residential landscapes
• Container and field grown nursery production
• Industrial landscapes
• Perennial peanuts (nonfood)
• Potting soil and topsoil
• Forestry, reforestation, and tree nurseries and plantations
Turfgrass
• Naturalized areas on golf courses
• Residential and commercial landscapes
Professional Vegetation Management
• Airports
• Electrical transformer stations
• Exteriors of public buildings
• Industrial areas
• Nonagricultural fences and hedgerows
• Paved areas
• Pipeline pumping stations
• Recreation areas
• Rights-of-way
• Seedhead and growth suppression on roadsides
• Sewage disposal areas
• Storage yards
• Timberland sites
• Wildflowers in naturalized areas

5
Mode of Action
Sethoxydim, the active ingredient in Segment® II 
 herbicide, is a graminicide which inhibits the enzyme 
 acetyl CoA carboxylase (ACCase), resulting in cessation of 
fatty acid synthesis which is essential for new growth. 
 Segment II rapidly enters the targeted grass weed 
through the foliage and translocates throughout the plant. 
Whole plant death occurs over approximately 3 weeks. 
Sethoxydim is classified in Group 1 by the Weed Science 
Society of America (WSSA). 
Herbicide Resistance Management
 Segment II is a Group 1 herbicide. Any weed population 
may contain or develop plants naturally resistant to 
 Segment II and other Group 1 herbicides. Weed species 
with resistance to Group 1 may eventually dominate the 
weed population if Group 1 herbicides are used repeated-
ly in the same field or in successive years as the primary 
method of control for targeted species. This may result in 
partial or total loss of control of those species by 
 Segment II or other Group 1 herbicides.
To delay herbicide resistance consider:
• Avoiding the consecutive use of Segment II or other tar-
get site-of-action Group 1 herbicides that have a similar 
target site of action on the same weed species.
• Using tank mixes or premixes with herbicides from differ-
ent target-site-of-action groups as long as the involved 
products are all registered for the same use, have differ-
ent sites of action, and are both effective at the tank mix 
or prepack rate on the weed(s) of concern.
• Basing herbicide use on a comprehensive IPM (Integrat-
ed Pest Management) program including cultural and 
mechanical methods.
• Monitoring treated weed populations for loss of field effi-
cacy, and controlling escapes with effective alternative 
herbicides or mechanical methods.
• Identifying weeds present in the field through scouting 
and field history and understanding their biology. The 
weed-control program needs to consider all of the 
weeds present.
• Scouting fields prior to application to identify the weed 
species present and their growth stage to determine if 
the intended application will be effective.
• Scouting fields after application to verify the treatment 
was effective.
• Suspected herbicide-resistance weeds may be identified 
by these indicators:
1. Failure to control a weed species normally controlled 
by the herbicide at the dose applied, especially if con-
trol is achieved on adjacent weeds;
2. A spreading patch of non-controlled plants of a partic-
ular weed species; and
3. Surviving plants mixed with controlled individuals of 
the same species.
• If resistance is suspected, treat weed escapes with an 
herbicide with a different MOA and/or use nonchemical 
methods to remove escapes, as practical, with the goal 
of preventing further seed production.
• Report any incidence of non-performance of this product 
against a particular weed species to your local BASF 
representative.
• Contacting your local extension specialist, certified crop 
advisors, and/or manufacturer for herbicide resistance 
management and/or integrated weed management 
directions for specific crops and resistant weed biotypes.
• Contact your local extension specialist, certified crop 
advisor, and/or manufacturer to find out if suspected 
resistant weeds to this mode of action have been found 
in your region. If resistant biotypes of target weeds have 
been reported, use the application rates of this product 
specified for your local conditions. Tank mix products so 
that there are multiple effective mechanisms of actions 
for each target weed.
Spray Drift Advisory
The applicator is responsible for avoiding off-site spray 
drift. Be aware of nearby nontarget sites and environmen-
tal conditions.
Importance of Droplet Size
An effective way to reduce spray drift is to apply large 
droplets. Use the largest droplets that provide target pest 
control. While applying larger droplets will reduce spray 
drift, the potential for drift will be greater if applications are 
made improperly or under unfavorable environmental 
conditions.
Controlling Droplet Size - Ground Boom
• Volume - Increasing the spray volume so that larger 
droplets are produced will reduce spray drift. Use the 
highest practical spray volume for the application. If a 
greater spray volume is needed, consider using a nozzle 
with a higher flow rate.
• Pressure - Use the lowest spray pressure recommend-
ed for the nozzle to produce the target spray volume and 
droplet size.
• Spray Nozzle - Use a spray nozzle that is designed for 
the intended application. Consider using nozzles 
designed to reduce drift.
Controlling Droplet Size - Aircraft
• Adjust Nozzles - Follow nozzle manufacturer’s recom-
mendations for setting up nozzles. Generally, to reduce 
fine droplets, nozzles should be oriented parallel with the 
airflow in flight.
Boom Height - Ground Boom
For ground equipment, the boom should remain level with 
the vegetation and have minimal bounce.
Release Height - Aircraft
Higher release heights increase the potential for spray drift.
Shielded Sprayers
Shielding the boom or individual nozzles can reduce spray 
drift. Consider using shielded sprayers. Verify that the 
shields are not interfering with the uniform deposition of 
the spray on the target area.

6
Temperature and Humidity
When making applications in hot and dry conditions, use 
larger droplets to reduce effects of evaporation.
Temperature Inversion
Drift potential is high during a temperature inversion. Tem-
perature inversions are characterized by increasing 
temperature with altitude and are common on nights with 
limited cloud cover and light to no wind. The presence of 
an inversion can be indicated by ground fog or by the 
movement of smoke from a ground source or an aircraft 
smoke generator. Smoke that layers and moves laterally in 
a concentrated cloud (under low wind conditions) indicates 
an inversion, while smoke that moves upward and rapidly 
dissipates indicates good vertical air mixing. Avoid applica-
tions during temperature inversions.
Wind
Drift potential generally increases with wind speed. AVOID 
APPLICATIONS DURING GUSTY WIND CONDITIONS. 
Applicators need to be familiar with local wind patterns 
and terrain that could affect spray drift.
Boomless Ground Applications
Setting nozzles at the lowest effective height will help to 
reduce the potential for spray drift.
Handheld Technology Applications
Take precautions to minimize spray drift.
Tank Mixing Information
It is the pesticide user’s responsibility to ensure that all 
products in the listed mixtures are registered for the 
intended use. Read and follow the applicable restrictions 
and limitations and directions for use on all product labels 
involved in tank mixing. Users must follow the most restric-
tive directions for use and precautionary statements of 
each product in the tank mixture.
To control additional broadleaf weed species, tank mix 
with:
Basagran
® T&O herbicide (turf and ornamental use)
Goal® 2 XL herbicide (professional vegetation manage-
ment only)
Stinger® herbicide (professional vegetation management 
only)
Physical incompatibility, reduced grass weed control, or 
plant injury may result from mixing Segment® II 
 herbicide with other pesticides (fungicides, herbicides, 
insecticides, or miticides), additives or fertilizers. BASF 
does not recommend using tank mixes other than those 
listed on BASF labeling. 
Compatibility Test for Mix Components
Add components in the following sequence: use 2 tea-
spoons per one pound dry product per acre OR 
1 teaspoon per one pint of liquid product per acre. 
1. Water - for 20 gallons per acre spray volume, use 
3.3 cups (800 ml) of water. For other spray volumes, 
adjust rates accordingly. Use only water from the intend-
ed source at the source temperature.
2. Products in PVA Bags - Cut an opening in the water 
soluble PVA bag just large enough to use a teaspoon for 
measuring purposes. Cap the jar and invert 10 cycles. 
NOTE: Use the opened water-soluble PVA bag first 
when preparing the spray solution.
3. Water dispersible products (dry flowables, wettable 
powders, suspension concentrates, or suspo- 
emulsions) - Cap the jar and invert 10 cycles.
4. Water-soluble products - cap the jar and invert 
10 cycles.
5. Emulsifiable concentrates ( Segment II) - Cap the jar 
an invert 10 cycles.
6. Let the solution stand for 15 minutes.
7. Evaluate the solution for uniformity and stability. The 
spray solution should not have free oil on the surface or 
thick (clabbered) texture. For water-dispersible granule 
(WG) or wettable powder (WP) products, a fine precipi-
tate that is easily resuspended is normal; large 
nondispersible particles (>300 microns) that precipitate 
on standing are a sign of tank mix incompatibility. 
DO NOT use any spray solution that could clog spray 
nozzles.
Mixing Order
Maintain constant agitation throughout mixing and applica-
tion. Always perform a compatibility test to ensure proper 
mixing. See Compatibility Test for Mix Components 
section of the label for directions.
1. Water - Begin by agitating a thoroughly clean sprayer 
tank 3/4 full of clean water.
2. Inductor - If an inductor is used, rinse it thoroughly 
after each component has been added.
3. Products in PVA bags - Place any product contained 
in water-soluble PVA bags into the mixing tank. Wait 
until all water-soluble PVA bags have fully dissolved and 
the product is evenly mixed in the spray tank before 
 continuing.
4. Water-dispersible products (dry flowables, wettable 
powders, suspension concentrates or suspo-emulsions)
5. Water-soluble products
6. Emulsifiable concentrates (including Segment II)
7. Water-soluble additives 
8. Remaining quantity of water

7
Additives
Always apply Segment® II herbicide with a crop oil con-
centrate (COC) or methylated/modified seed oil (MSO) as 
directed in Table 5. Non-ionic surfactants (NIS) or blends 
are not recommended because weed control may be 
unsatisfactory. 
Crop oil concentrates or methylated seed oils used as an 
adjuvant with Segment II must meet all the following 
 criteria:
• Nonphytotoxic
• Produce good mixing quality in the jar test
• Successful in local experience 
When an adjuvant (or specific adjuvant product, such as a 
drift control agent) is to be used with this product, the use 
of a Chemical Producers and Distributors Association 
(CPDA) certified adjuvant is recommended. Consult your 
local BASF representative or distributor for instructions for 
your area.
Use Information
Apply Segment II to actively growing weeds as a poste-
mergence broadcast or spot spray in labeled ornamental, 
turfgrass and, professional vegetation management sites 
at the specified rates and growth state listed in Table 1. 
DO NOT exceed the labeled application rate or fail to 
comply with use specifications in Restrictions and 
Limitations. 
For best results, weeds should be actively growing and not 
under stress from lack of water, excessive water, low fertili-
ty, mowing shock, excessive hot or cold temperatures, or 
injury from other herbicide applications.
To achieve consistent weed control, a crop oil concentrate 
(COC) or methylated seed oil (MSO) adjuvant is required. 
See Table 5 for adjuvant and additive rates.
Plant Tolerance and Phytotoxicity Notice
 Segment II has been applied to a wide variety of common 
ornamental plants without observed plant injury. Refer to 
Table 10, Table 11, Table 12, Table 13, and Table 14 for 
the list of plant shown to be tolerant to Segment II. Not all 
species, varieties, and cultivars have been tested for toler-
ance to Segment II, possible tank mix combinations, 
pesticide treatments before or after those with 
 Segment II, and combinations with surfactants or adju-
vants. Local conditions can also influence plant tolerance 
and may not match those under which BASF has conduct-
ed testing. Because many cultivars within a plant species 
vary in tolerance to chemical applications and growing 
conditions, the grower must recognize these differences 
and test the product accordingly. At a minimum always 
test a small group of representative plants for tolerance to 
 Segment II under local growing conditions and before 
large-scale use. Refer to Table 10, Table 11, Table 12, 
Table 13, and Table 14 for both tolerant and sensitive 
ornamental plants. Refer to Table 6, Table 7, Table 8, and 
Table 9 for use site specific instructions and restrictions.
User assumes responsibility for testing ornamental suitabil-
ity under local growing conditions by treating a small 
number of plants at the specified rate. At a minimum, 
this should include evaluating treated plants for sev-
eral weeks following treatment for possible injury or other 
effects. To the extent consistent with applicable law, by 
applying Segment II, the user assumes responsibility for 
any plant damage or other liability associated with factors 
beyond the manufacturer’s control, such as weather, pres-
ence of other materials and manner or use of application 
inconsistent with this labeling.
Mowing Information
To maximize weed control and minimize potential turfgrass 
injury DO NOT mow centipedegrass and fine fescue areas 
within 7 days before or after applying Segment II. 
Increased weed control has been observed when mowing 
is delayed for 14 days after application. Grass weeds that 
have been mowed or have regrown from mowed stubble 
may be controlled poorly. Repeat application if new germi-
nation or regrowth occurs. 
Irrigation and Rainfall
If soil moisture is not sufficient for Segment II application, 
irrigation may improve weed control. Segment II is rain-
fast after one hour.
Application Instructions
Applications (aerial, broadcast, band or spot spray) can be 
made to actively growing grass weeds at the rates and 
growth stages listed in Table 1, Table 2, Table 3, and 
Table 4 unless instructed differently in the Use Site- 
specific Information sections. The most effective control 
will result from making postemergence applications of 
 Segment II early, when grass weeds are small. Delaying 
application permits weeds to exceed the maximum size 
stated and will prevent complete control. 
DO NOT apply when conditions favor drift from the target 
area or wind speed is greater than 10 mph.
Ground Application (Broadcast)
Apply with properly calibrated ground equipment in suffi-
cient water per acre to provide uniform spray distribution 
(between 5 to 50 gallons spray solution per acre or 1 to 
10 pints per 1,000 square feet). Apply Segment II using 
30 to 60 psi. If weed or plant foliage is dense, use a mini-
mum of 20 gallons of water and 60 psi. 
Spot or Small Area Application
 Segment II can be applied using tank-type sprayers, back-
pack sprayers, high-volume equipment with handguns, or 
other suitable nozzle arrangements. Prepare a solution of 
 Segment II in water according to Table 3 or Table 4.
DO NOT make spot treatments in addition to broadcast 
treatment.

8
Mixing Instructions for Backpack and 
Pump-up Type Sprayers
• Fill a clean spray tank 1/2 full with clean water
• Add required amount of Segment® II herbicide
• Cap sprayer and agitate to ensure adequate mixing
• Uncap sprayer and add appropriate amount of adjuvant 
(COC or MSO) or additive
• Cap sprayer and agitate again to ensure adequate 
mixing
• Finish filling tank to the desired level
Apply spray mixture directly on sporadically occurring sus-
ceptible weeds (See Table 5). For best results apply on a 
spray-to-wet basis. Follow up applications may be made if 
necessary.
Cleaning Spray Equipment
Clean application equipment thoroughly using a strong 
detergent or commercial sprayer cleaner, like Neutralize
TM 
tank cleaner or Nutra-Sol ® tank cleaner, according to 
the manufacturer’s directions before and after applying this 
product.
Table 1. Application Rates for Annual Grass Control
Grasses Controlled Maximum Rate per Application 1
Common Name Scientific Name Grasses up to 6 inch 
height
Grasses up to 12 inch 
height
Barnyardgrass
Broadleaf signalgrass
Brome, downy
4
Crabgrass, large2, 3
Crabgrass, smooth2, 3
Cupgrass, woolly
Fescue, tall, seedling
Foxtail, giant
Foxtail, green
Foxtail, yellow
Goosegrass
2, 3
Johnsongrass, seedling
Junglerice
Lovegrass
Orchardgrass, seedling
Panicum, browntop
Panicum, fall
Panicum, Texas
Ryegrass, annual
4
Sandbur, field
Shattercane/Wildcane
Sprangletop, red*
Stiltgrass, Japanese
Volunteer barley
Volunteer oats
Volunteer rye
Volunteer wheat
Wild oats
Wild proso millet
Witchgrass
Echinochloa crus-galli
Urochloa platyphylla
Bromus tectorum
Digitaria sanguinalis
Digitaria ischaemum
Eriochloa villosa
Festuca arundinacea
Setaria faberi
Setaria viridis
Setaria glauca
Eleusine indica
Sorghum halepense
Echinochloa colonum
Eragrostis curvula
Dactylis glomerata
Panicum fasiculatum
Panicum dichotomiflorum
Panicum texanum
Lolium multiflorum
Cenchrus spinifex
Sorghum bicolor
Leptochloa filiformis
Microstegium vimineum
Hordeum vulgare
Avena sativa
Secale cereale
Triticum aestivum
Avena fatua
Panicum miliaceum
Panicum capillare
1.5 pints per acre 
or 
0.6 fluid ounce per 
1,000 square feet
2.5 pints per acre 
or 
0.9 fluid ounce per 
1,000 square feet
1 See the Use Site-specific Information sections for use-specific maximum seasonal use rates.
2 Up to 4 inches
3 In seedling centipedegrass and fine fescue, use 1 pint per acre or 0.4 fluid ounce per 1,000 square feet.
4 Up to 8 inches
* Not recommended in Arizona or western New Mexico.

9
Table 2. Application Rates for Perennial Grass Control
Grasses Controlled Maximum Rate per Application 1
Common Name Scientific Name Grasses up to 6 inch 
height
Grasses up to 12 inch 
height
Bahiagrass2
Bentgrass
Bermudagrass3
Johnsongrass, rhizome
Quackgrass
Velvetgrass, creeping
Velvetgrass, German
2
Wirestem muhly
Paspalum notatum
Agrostis spp.
Cynodon dactylon
Sorghum halepense
Elytrigia repens
Holcus mollis
Holcus mollis
Muhlenbergia frondosa
1.5 pints per acre 
or 
0.6 fluid ounce per 
1,000 square feet
2.5 pints per acre 
or 
0.9 fluid ounce per 
1,000 square feet
1 See the Use Site-specific Information sections for use-specific maximum seasonal use rates.
2 Up to 4 inches
3 6 inch stolon maximum
Table 3. Spot Treatment Application Rates
Grass 
(see Table 1 and Table 2 for 
the complete list of grasses controlled)
Concentration of Segment ® II herbicide 
in Spray Solution 
(%)
Annual grasses up to 6 inch height 1.0
Annual grasses up to 12 inch height 1.0
Perennial grasses 1.0
Table 4. Spot Treatment Dilution
Spray Solution Volume 
(gallons)
Amount of Segment II to be Added 
(fl ozs)
1.0% v/v
1
3
5
1.3
3.8
6.4
Table 5. Additive Rate per Acre
Additive Rate per Acre (Aerial and Ground) Spot Treatment
COC 2.0 pints 0.6 oz/gal
MSO 1.5 pints 0.5 oz/gal

10
Use Site-specific Information
Applications (aerial, broadcast, band or spot-spray) can be made to actively growing grass weeds at the rates and 
growth stages listed in Table 1 and Table 2, unless instructed differently in the following Use Site-specific 
 Information sections.
Christmas Tree, Deciduous Tree Farms and Timber Production Sites
Segment® II herbicide can be used to control annual and perennial grasses during site preparation, establishment 
and/or maintenance of tree plantations, Christmas tree plantations, conifer and hardwood seedling nurseries, pulpwood 
farms and fiber farms. Segment II may also be used for hardwood and conifer regeneration on Conservation Reserve 
Program land or similar areas.
If a Christmas tree or deciduous tree is not listed in Table 10, the user may determine if Segment II can be used safely 
prior to broad use by applying the specified use rate to the target plant in a small test area under typical conditions. Any 
adverse effects should be visible within 7 days.
 Segment II can be tank mixed with select herbicides to suppress desirable tall fescue and enhance efficacy by expand-
ing the number of weed species controlled. Consult Table 6 and Table 7 for tank mix partners. Suppression of tall 
fescue grown for ground cover on tree farms must be actively growing at the time of application or injury may occur.
Table 6. Tank Mixes for Grass and Broadleaf Weed Control in Christmas Tree and 
Deciduous Tree Farms
Use Sites Tolerant Species Tank Mix Directions Restrictions and 
Limitations
Christmas trees and 
conifer farms
Fir (Balsam, Douglas, 
Fraser, Grand, Noble)
Pine (Lodgepole, 
Ponderosa, Scotch, 
White)
Spruce (Blue)
Segment II 
(up to 2.5 pints per 
acre) 
+ 
Goal® 2 XL 
herbicide1, 2
• Apply at 20 gallons 
spray solution per 
acre at 40 psi be-
fore conifer 
bud-break or after 
foliage has hard-
ened off.
• Refer to Goal 2XL 
label for application 
rates.
DO NOT apply tank 
mixtures when tem-
peratures exceed 
90° F.
DO NOT apply tank 
mix to conifer seed-
lings less than 
10 months old.
DO NOT apply this 
tank mix by aircraft.
Deciduous tree farms
Segment II 
(0.3 to 1.0 pint per 
acre) 
+ 
Stinger
® herbicide
• Apply tank mix only 
over the top of spe-
cies listed under 
use sites.
DO NOT add surfac-
tant or oil concentrate 
to this tank mix as 
injury may occur.
In the Pacific 
Northwest – DO NOT 
apply this tank mix in 
the first year of trans-
planting as injury may 
occur.
1 Always follow the most restrictive label.
2 Begin applications at the minimum rate on both labels to assess weed control and plant tolerance.

11
Table 7. Tall Fescue Suppression with Segment® II herbicide
Use Sites Species 
Suppressed Timing Rate Restrictions and Limitations
Tree farms
Fescue, tall, 
mature1
• Apply in spring 
after 4 to 6 inches 
of new growth, but 
BEFORE seedhead 
formation.
2
• Sequential applica-
tions will extend 
suppression if 
needed.
3
2.0 to 2.5 pints per 
acre 
or 
0.4 to 0.5 ounce per 
1,000 square feet 
Up to 5 pints per acre 
or 
0.9 ounce per 
1,000 square feet
DO NOT apply to tall fescue that 
is less than one year old.
Applications made when tem-
peratures are at or exceed 90° F 
may be less effective (July 1 to 
mid-August).
Begin applications at lower rates 
and adjust according to tall fes-
cue response and local 
conditions.
Local environmental conditions 
or overall growth differences at 
application may cause results to 
be different than expected.
Roadsides, Rights-
of-way, Nonfood 
crop alleyways
1.0 pint per acre 
or 
0.4 ounce per 
1,000 square feet
DO NOT make more than one 
application of Segment II to tall 
fescue per year.
DO NOT apply after May 1 in AL, 
GA and TN; timing may vary in 
other areas.
Treated vegetation may not be 
used for feed, forage, hay or 
silage.
1 Tall fescue MUST be established for one year prior to application
2 Apply before conifer bud-break
3 Only applies to tree farm use sites
Non-bearing Fruit and Nut Crops, Ornamental and Nursery Plantings, Ornamentals in 
Residential and Commercial Landscapes, Rights-of-way, Roadsides, Nonfood Crop Areas 
and Alleyways, Noncrop Areas
Applications can also be made to nurseries including non-bearing fruit and nut trees (including citrus), conifer and hard-
wood seedling liner nurseries or tree farms (including Christmas trees), and the nonproduction areas in commercial 
nurseries including storage areas, vegetation filter strips, windbreaks, shelterbelts, cart paths, graveled areas.
 Segment II may be applied to ornamental (non-bearing) fruit and nut trees (including citrus), vines, brambles, and bush-
berries grown in commercial ornamental production nurseries. Non-bearing trees, vines, brambles, and bushberries are 
grown in ornamental production nurseries where immature and/or inedible fruits, nuts, or berries may appear on the tree, 
vine, bramble, and bush but are not intended for harvest or consumption.
If species in the application are not listed as tolerant to Segment II in Table 10, Table 11, Table 12, Table 13, and 
Table 14, apply as a directed spray away from sensitive, desirable plants. Segment II may also be applied to sites such 
as rights-of-way, noncrop areas and nonfood crop areas such as airports, industrial sites, roadsides, storage yards and 
other areas listed under product information. 
Repeat application if new germination or regrowth of grass weeds occurs.

12
Commercial and Residential Landscapes, Naturalized Areas On Golf Courses, 
Rights-of-way
Apply Segment® II herbicide on centipedegrass and fine fescue to control annual and perennial grass weeds. See 
Table 8 for application rates and timings. Segment II does not control annual bluegrass or rattail fescue. Segment II 
can be tank mixed to expand weeds controlled.
DO NOT apply Segment II to desirable tall fescue turfgrass.
Table 8. Grass Weed Control in Centipedegrass and Fine Fescue
Tolerant Species Rate Restrictions and Limitations
Centipedegrass, seedling Up to 1.0 pint per acre per 
application
DO NOT apply more than 2.0 pints per acre per season.
Centipedegrass, mature Up to 1.5 pints per acre per 
application
DO NOT apply more than 3.0 pints per acre per season.
Fescue, fine Up to 2.5 pints per acre per 
application
DO NOT apply more than 3.0 pints per acre per season.
Table 9. Tank Mixes for Weed Control in Centipedegrass and Fine Fescue
Use Sites Weeds Controlled Tank Mix Directions Restrictions and Limitations
Centipedegrass 
and Fine fescue
Broadleaf weeds 
Grasses (annual and 
perennial)
Yellow nutsedge
Segment II 
(up to 2.5 pints per 
acre) 
+ 
Basagran
® T&O 
herbicide 
(2 to 4 pints per 
acre)
Apply to established 
turfgrass.
DO NOT apply to newly seeded 
turfgrass sites until the turf has 
become fully established.
Use of oil concentrates with 
this mixture is not 
recommended.

13
Wildflowers in Naturalized Areas
Segment® II herbicide can be used to control grass weeds in native wildflower sites on roadsides, native areas on golf 
courses and in landscapes. Many wildflower species are tolerant of Segment II applications. For a complete list of spe-
cies tested, see Table 14. Apply Segment II prior to blooming.
Make broadcast applications of Segment II 4 to 6 weeks after wildflower emergence, but not during flowering. Base 
application timing on grass size according to Table 1 and Table 2. A second application may be necessary if additional 
grass weeds germinate later in the season.
Table 10. Trees Tolerant to Segment® II herbicide Applications
Common Name Scientific Name
Acacia, knife leaf Acacia cultriformis
Arborvitae, Berkmans Oriental Thuja orientalis
Arborvitae, Eastern Thuja occidentalis var. Teehny
Ash, green Fraxinus pennsylvanicum
Ash, mountain
Sorbus americana decora
Sorbus aucuparia
Ash, white Fraxinus americana
Basswood, American Tilia americana
Birch Betula spp.
Birch, Asian white Betula platyphylla var. Japonica
Birch, European white Betula pendula
Birch, paper Betula papyrifolia
Birch, river, black or red Betula nigra
Bottle tree Brachychiton populneus
Bottle-brush Callistemon lanceolatus
Brisbane box tree Tristania conferta
Cajeput tree Melaleuca quinquenervia
Carob tree Ceratonia siliqua
Carrot wood Cupaniopsis anacardioides
Catalpa, Southern Catalpa bignonioides
Cherry, black Prunus serotina
Cherry, Carolina Prunus caroliniana var. Compacta
Crabapple, flowering Malus spp.
Cypress, false Chamaecyparis pisifera
Cypress, Italian Cupressus sempervirens
Cypress, leyland Cupressocyparis leylandii
Dogwood, flowering Cornus florida
Dogwood, pagoda Cornus alternifolia
Dogwood, silky Cornus amonum
Elm, Chinese evergreen Ulmus parvifolia
Eucalyptus
Eucalyptus lehmannii
E. nicholi granis
E. robusta
(continued)

14
Table 10. Trees Tolerant to Segment® II herbicide Applications (continued)
Common Name Scientific Name
Fir Abies spp.
Fir, balsam* Abies balsamea
Fir, California red* Abies magnifica var. magnifica
Fir, Douglas* Pseudotsuga mensiesii
Fir, Fraser* Abies fraseri
Fir, grand* Abies grandis
Fir, noble* Abies procera
Fir, Nordmann* Abies nordmanniana
Fir, Shasta red* Abies magnifica var. shastensis
Fir, Turkish* Abies bornmuelleriana
Fir, white* Abies concolor
Goldenrain tree Koelreuteria paniculata
Guava Psidium littorale
Guava, pineapple Feijoa sellowiana
Gum, blue Eucalyptus globulus
Gum, lemon-scented Eucalyptus citriodera
Gum, red box Eucalyptus polyanthemos
Hackberry, common Celtis occidentalis
Hemlock, Canada* Tsuga canadensis
Holly, Chinese llex cornuta var. Bufordii, Rotunda
Holly, hybrid llex spares var. Nellie Stevens
Holly, Japanese llex crenata var. Compacta, Convexa, Helleri, Hoogendorn
Holly, yaupon llex vomitoria
Ironbark, red Eucalyptus sideroxylon
Jacaranda Jacaranda mimosifolia
Kentucky coffee tree Gymnocladus dioicus
Larch, European Larix europa
Laurel, Indian Ficus microcarpa nitida
Linden Tilia americana
Linden, littleleaf Tilia cordata
Locust, Black Robinia pseudoacacia
Locust, honey Gleditsia triacanthos inermis
Loquat Eriobotrya japonica
Magnolia, Southern Magnolia grandiflora
Maple, Japanese Acer palmatum
Maple, red Acer rubrum
Maple, silver Acer saccharinum
Myoporum Myoporum laetum
New Zealand Christmas tree Metrosideros excelsus
(continued)

15
Table 10. Trees Tolerant to Segment® II herbicide Applications (continued)
Common Name Scientific Name
Oak Quercus spp.
Oak, red‡ Quercus rubra
Oak, water Quercus nigra
Oak, white‡ Quercus alba
Oak, willow Quercus phellos
Olive, Russian Elaeagnus angustifolia
Olive tree Olea europaea
Orchid tree, purple Bauhinia variegata
Osage orange Maclura pomifera
Palm, Mediterranean fan Chamaerops humilis
Palm, pygmy date Phoenix roebelenii
Palm, queen Arecastrum romanzoffianum
Palm, sago Cycas revoluta
Palm, windmill Tracheocarpus fortunei
Palo verde, green Parkinsonia aculeata
Paulownia royal Paulownia tomentosa
Pear, common Pyrus communis
Pear, evergreen Pyrus kawakamii
Pear, Ussurian Pyrus ussuriensis
Pepper, Brazilian Schinus terebinthifolius
Pine, Aleppo Pinus halepensis
Pine, Austrian* Pinus nigra
Pine, Canary Island Pinus canariensis
Pine, Caribbean slash Pinus caribean
Pine, Italian stone Pinus pinea
Pine, jack Pinus banksiana
Pine, Japanese black Pinus thunbergii
Pine, Japanese white Pinus parviflora
Pine, loblolly Pinus taeda
Pine, lodgepole* Pinus contorta latifolia
Pine, Longleaf* Pinus palustris
Pine, Monterey* Pinus radiata
Pine, Mugho Pinus mugho
Pine, ponderosa* Pinus ponderosa
Pine, red Pinus resinosa
Pine, Scotch* Pinus sylvestris
Pine, shore Pinus contra
Pine, slash Pinus ellottii
Pine, Virginia* Pinus virginiana
Pine, Western yellow Pinus ponderosa
Pine, white* Pinus strobus
Pine, yew Podocarpus macrophyllus
(continued)

16
Table 10. Trees Tolerant to Segment® II herbicide Applications (continued)
Common Name Scientific Name
Plum, wild Prunus americana
Poplar, hybrid Populus alba
Purpleleaf, Bailey acacia Acacia baileyana
Redwood, coast Sequoia sempervirens
Sandcherry, Western Prunus besseyi
Sensitive plant Mimosa pudica
Silk tree Albizia julibrissin
Spruce, Black Hills* Picea glauca var. Densata
Spruce, Colorado Blue* Picea pungens
Spruce, Norway* Picea abies
Spruce, white* Picea glauca
Strawberry tree Arbutus unedo
Sumac, African Rhus lancea
Sweet gum Liquidambar stryaciflus
Sycamore Platanus occidentalis
Tea tree, Australian Leptospermun laevigatum
Tipu tree Tipuana tipu
Tuliptree Liriodendron tulipifera
Walnut, black Juglans nigra
Weeping fig Ficus benjamina var. Exotica
Willow, Australian Geijera parviflora
Willow, Corkscrew Salix matsudana var. Tortuosa
Willow, Desert Pittosporum phillyraeoides
Willow, peppermint Agonis flexuosa
Yate, bushy Eucalyptus lehmannii
Yew, English Taxus baccata
* Christmas trees
‡ Applications of Segment II can result in injury
Table 11. Shrubs Tolerant to Segment® II herbicide Applications
Common Name Scientific Name
Abelia, glossy Abelia grandiflora
Acacia, Bailey Acacia baileyana
Acacia, knife leaf Acacia cultriformis
Acacia, prostrate Acacia redolens
Acacia, Sydney golden wattle Acacia longifolia
Andromeda Pieris japonica
Arborvitae, Oriental Platycladus orientalis
Arrowwood, Southern Viburnum dentatum
Azalea
Rhododendron spp. var. Christmas cheer, Coral blue, 
Delaware Valley white, Formosa flame, Hershey red, 
Hinocrimson, Hinodigiri, New white, Pink ruffle, Snow
(continued)

17
Table 11. Shrubs Tolerant to Segment® II herbicide Applications (continued)
Common Name Scientific Name
Azalea, mollis hybrid R. x kosterianum
Azalea, Northern lights hybrid R. x kosterianum x R. prinophyllum
Bamboo, heavenly Nandina domestica
Barberry, Japanese Berberis thunbergii
Barberry, Korean Berberis koreana
Barberry, redleaf Berberis virginian
Bird of Paradise bush Caesalpinia gillesil
Bluebeard Caryopteris clandonensis
Boxwood, African Myrsine africana
Boxwood, common Buxus sempervirens
Boxwood, Japanese Buxus microphylla var. Japonica
Buckthorn, Glossy (Alder) Rhamnus alnus
Burning bush, winged Euonymus alata
Camellia Camellia japonica; C. sasanqua
Cedar, Eastern red Juniperus virginiana var. Caneartii, Pyramidiformus
Cherry, brush Eugenia myrtifolia
Cherry, Manchu, Nanking Prunus tomentosa
Chokecherry spp. Aronia meloelata
Copper plant, Caribbean Euphoria cotinifolia
Cotoneaster, bearberry Cotoneaster dammeri
Cotoneaster, cranberry Cotoneaster apiculatus
Cotoneaster, Peking Cotoneaster acutifolius
Coyote bush Baccharis pilularis
Cranberry bush, American Viburnum trilobum
Cranberry bush, golden Viburnum opulus aureum
Crape myrtle Lagestromia indica
Currant, alpine Ribes alpinum
Dogwood, red osier Cornus stolonifera
Elaeagnus Elaeagnus umbellata
Escallonia Escallonia fradesii; E. rubia
Euonymus Euonymus japonicus var. Golden, Silver King
Fig, creeping Ficus repens
Firethorn Pyracantha graberi
Flax, New Zealand Phormium tenax
Forsythia, greenstem Forsythia viridissima bronxeniss
Fuschia, Australian Correa pulchella
Gardenia Gardenia augusta; G. jasminoides var. Mystery, Radicans, 
Veitchii
Gold vine, Guinea Hibbertia scandens
Hakea Hakea proteacea
Hawthorn, Indian Phaphiolepis indica
Hebe Hebe ‘Coed’
(continued)

18
Table 11. Shrubs Tolerant to Segment® II herbicide Applications (continued)
Common Name Scientific Name
Hibiscus, blue Alyogyne huegelli
Hibiscus, Chinese Hibiscus rosa-sinensis
Holly, Chinese llex cornuta var. Burfordii Nana (Dwarf Burford)
Honeysuckle, bush Dierville lonicera
Honeysuckle, cape Tecomaria capensis
Hydrangea Hydrangea macrophylla
Jasmine, Asiatic Trachelopsermum asiaticum
Jasmine, orange Murraya paniculata
Jasmine, star Trachelospermum jasminoides
Jasmine, winter Jasmine nudiflorum
Jessamine, Carolina Gelsemium sempervirens
Jojoba Simmondsia chinensis
Juniper Juniperus spp.
Juniper, Chinese
Juniperus chinensis var. Hekii, Maneyi, Nana, Old Gold, 
Phtzerana (Aurea, Golden Pfitzer, Pfitzer), Sea Green, 
Torulosa
Juniper, creeping
Juniperus horizontalis var. Andorra, Bar Harbor, Blue Rug, 
Bluechip, Hughes, Plumosa, Prince of Wales, Variegata, 
Webberi, Wiltonii, Youngstown
Juniper, Rocky Mountain
Juniperus scopulorum var. Admiral, Blue Heaven, Green, 
Medova, Moffet, Pyramidal Springtime, Welchii, Wichita 
Blue
Juniper, savin Juniperus sabina var. Arcadia, Broadmoor, Buffalo, Pepin, 
Skandia
Juniper, shore Juniperus conferta var. Compacta
Juniper, tam Juniperus Sabina var. Tamariscifolia
Lantana, purple trailing Lantana montevidensis
Laurustinus Viburnum tinus
Lemonade berry Rhus integrifolia
Lilac, common purple Syringa vulgaris purpura
Lily turf Liriope muscari
Mickey Mouse bush Ochna serrulata
Mirror plant Coprosma repens
Mock Orange Pittosporum tobira
Mock Orange, Japanese Pittosporum tobira var. Wheeler’s Dwarf
Mountain lilac Ceanothus griseus
Myrtle, dwarf Myrtus communis var. Compacata
Nandina, heavenly bamboo Nandina domestica
Nannyberry Viburnum lantago
Ninebark Physocarpus opulifolius var. Aureus, Nanus
Oleander Nerium oleander
Orange, Mock Pittosporum tobira var. Variegata
Orchid, rockrose Cistus purpureus
Oregon grape Mahonia aquifolium
(continued)

19
Table 11. Shrubs Tolerant to Segment® II herbicide Applications (continued)
Common Name Scientific Name
Osmanthus, holly-leaf Osmanthus heterophyllus
Osmanthus, sweet olive Osmanthus fragrans
Palm, natal Carissa grandiflora var. Green carpet tuttle
Pampas grass Cortederia selloana
Photinia Photinia spp.
Photinia, Fraser Photinia fraser
Pink lady Rahioleis indica
Pink powder puff Calliandra haematocephala
Plumbago, cape Plumbago capensis
Podocarpus, yew Podocarpus macrophyllus
Potentilla Potentilla fruticosa; P. verna var. Jackmanni, K. VanDyke
Princess flower Tibouchina urvilleana
Privet Ligustrum indica
Privet, gloss Ligustrum lucidum var. Lake Tresca
Privet, Japanese Ligustrum japonicum
Privet, Texas Ligustrum texanum
Privet, waxleaf Ligustrum japonicum
Purple hop bush Dodonaea viscosa
Pyracantha Pyracantha graberi
Sandcherry, purpleleaf Prunus cistena
Serviceberry, Allegheny Amelanchier laevis
Serviceberry, Saskatoon Amelanchier alnifolia var. Regent
Sky flower, Brazilian Duranta stenostachya
Snowball bush Viburnum opulus sterilis
Spindle tree Euonymus kiautschovica
Spirea
Spiraea bumalda var. Fairy Queen
Spiraea nipponicaiovica
Spiraea trilobataiovica var. Snowbound
Spiraea vanhouteii var. Anthony Waterer, Froebellii, 
Goldflame
Star plant, lavender Grewia occidentalis
Tea tree, Australian Leptospermum laevigatum
Tea tree, New Zealand Leptospermum scoparium var. Red glow
Texas ranger Leucophyllum frutescens
Toyon, California holly Hetermeles arbutifolia
Trumpet vine, pink Pandorea rosea
Viburnum, Japanese Viburnum japonicum
Viburnum, Sandankwa Viburnum suspensum
Wayfaring tree Viburnum lantanoides
Weeping fig, exotica Ficus benjamina
Yellow bells Tecoma stans
Yesterday-Today-and-Tomorrow Brunfelsia calycina
Yew Taxus cuspitata vigatum

20
Table 12. Ornamental and Bedding Plants (Annual and Perennial) Tolerant to 
Segment® II herbicide Applications
Common Name Scientific Name
Alyssum Alyssum spp.
Asparagus, myers Asparagus densiflorus var. Meyeri; Sprengeri
Aster, New York Aster novi-belgii
Aster, stokes Stokesia cyanae var. Blue, White
Baby’s breath Gypsophila paniculata var. Bristo fairy
Begonia Begonia semperflorens
Bellflower, Tussock Campanula carpatica var. Canterbury bells
Bittersweet, American Calastrus scandens
Black-eyed Susan Rudbeckia hirta var. Goldilocks
Bleeding heart Dicentra spectabilis
Butterfly weed Asclepias tuberosa
Bougainvillea Bougainvillea hybrid var. Raspberry Ice
Bower vine Pandorea jasminoides
Cactus, barrel Echinocactus spp.
Candytuft Iberis sempervirens; I. amara
Canna Canna spp.
Cassia, feathery Cassia artemisioides
Creeping Jenny Lysimachia nummalaria
Chrysanthemum, Indian Chrysanthemum indicum
Chrysanthemum, Marguerite Chrysanthemum (Argyranthemum) frutescens
Cockscomb Celosia argentea
Coleus Coleus blumei
Coneflower, purple Echinacea purpurea var. Gloriosa Dairy
Coralbells Heuchera sanguinea
Coreopsis Coreopsis lanceolate var. Sunray
Cup of gold vine Solandra maxima
Daffodil Narcissus spp.
Dahlia Dahlia pinnata
Daisy Bush, Yellow Euryops pectinatus
Daisy, Felicia Felicia amelloides
Daisy, shasta Chrysanthemum maximum var. Alaska
Daylily Hemerocallis hybrids
Dianthus Dianthus deltoides
Dragonhead, false Physostegia virginiana
Dusty Miller Centaurea cineraria
Fern, sprenger asparagus Asparagus densiflorus var. Sprengeril
Fescue, blue Festuca ovina
Flowering tobacco Nicotiana spp.
Fountain grass, red Pennisetum setaceum
Gazania Gazania sp; G. ringens var. Leucolaena
Geranium Geranium spp.
(continued)

21
Table 12. Ornamental and Bedding Plants (Annual and Perennial) Tolerant to 
Segment® II herbicide Applications (continued)
Common Name Scientific Name
Geranium, Regal Pelargonium x domesticum var. Martha Washington
Gerbera daisy Gerbera jamesonii
Geum Geum quellyon var. Lady Strathedon, Mrs. Bradshaw, 
Mrs. Bradshaw Improved
Gladiolus Gladiolus spp.
Heather, false Cuphea hyssopifolia
Honeysuckle, amar Lonicera maachii
Honeysuckle, fly Lonicera xylosteum var. Clavey’s Dwarf, Emerald Mound
Honeysuckle, Japanese Lonicera japonica
Honeysuckle, morrow Lonicera morrowii
Honeysuckle, tatarian Lonicera tatarica var. Zabeli
Hopseed bush, purple Dodonaea viscosa var. Purpurea
Impatiens Impatiens spp.
Iris Iris spp.
Iris, African Dietes bicolor
Ivy, grape Cissus rhombifolia var. Ellen Danica
Jack-in-the-Pulpit Arisaemia pusillum
Jade plant Crassula argentea
Jasmine, Madagascar Stephanotis floribunda
Johnny-jump-up Viola tricolor
Lamb’s ear Stachys lanata
Lavender, cotton Santolina chamaecyparisus
Lavender, English Lavandula vera
Lavender, French Lavandula dentata
Lilac, Chinese Syringa chinensis
Lilac, common purple Syringa vulgaris var. Charles Joly, Jay tree, Ludwig 
Spaeth, Pupurata
Lilac, Korean Syringa patula var. Miss Kim
Lilac, Meyer Syringa meyeri var. Palibin
Lilac, mountain Ceanothus griseus
Lily-of-the-Nile Agapanthus africanus var. Peter Pan
LiIy-of-the-Valley Convallaria majalis
Lobelia Lobelia erinus
Marigold Tagetes spp.
Mirror plant Coprosma baureri
Mirror plant, vareigated Coprosma repens
Moss, rose Portulaca grandiflora
Moss, sandwort Arenaria verna
Pepper, ornamental Capsicum spp.
Periwinkle Vinca minor
Periwinkle, Madagascar Catharanthus roseus
(continued)

22
Table 12. Ornamental and Bedding Plants (Annual and Perennial) Tolerant to 
Segment® II herbicide Applications (continued)
Common Name Scientific Name
Petunia Petunia spp.
Phlox, perennial Phlox paniculata
Plantain llly Hosta spp.
Sage Salvia greggii
Sea pinks, thrift Armeria maritima
Sedum, stonecrop Sedum x rubrotinctum
Shrimp plant Justicia brandegeana
Sky flower, Brazilian Duranta stenostachya
Snail vine Vigna caracalla
Snapdragon Antirrhinum majus
Snow-in-summer Cerastium tomentosum
Speedwell, spike Veronica spicata
Statice, perennial Limonium perezil
Stock Mattiola incana
Sweet grass Acorus gramineus
Sweet William Dianthus barbatus
Trumpet vine, blood red Distictis buccinatoria
Trumpet vine, lavender Clytostoma callistegioides
Trumpet vine, pink Pandorea rosea
Transvaal daisy Gerbera jamesonii
Tulip Tulipa spp.
Verbena Verbena spp.
Wandering Jew Tradescantia spp.
Wisteria Wisteria sinensis
Yarrow Achillea millefolium var. Cerise Queen
Yarrow, Taygetea Achillea taygetea var. Debutante
Zinnia Zinnia elegans
Table 13. Groundcovers Tolerant to Segment® II herbicide Applications
Common Name Scientific Name
Aaron’s beard Hypericum calycinum
Aptenia Aptenia cordifolia var. Red apple
Bergenia, winter-blooming Bergenia crassofolia
Bugleweed Ajuga reptans
Capeweed Arctotheca calendula
Carpathian, harebell Campanula carpatica
Cinquefoil, spring Potentilla tabernaemontani
Coyote brush Baccharis pilularis var. Twin peaks
Crownvetch Coronilla varia
Cushion bush Calocephalus brownii
(continued)

23
Table 13. Groundcovers Tolerant to Segment® II herbicide Applications (continued)
Common Name Scientific Name
Daisy, freeway Osteospermum spp.
Daisy, white African Osteospermum fruticosum var. Alba
Gazania, trailing Gazania regens var. Leucolaena
Green carpet Herniaria glabra
Ivy, Algerian Hedera canaiensis
Ivy, Boston Parthenocissus tricuspidata
Ivy, English Hedera helix var. California; Hahnii
Ivy, grape Cissus rhombifolia var. Ellen Danica
Lantana, lavender Lantana montevidensis
Lily-turf Liriope muscari var. Big Blue
Lippla Phyla nodiflora
Mondo grass Ophiopogon japonicus
Myoporum Myoporum parvifolium var. Prostratum
Pachysandra Pachysandra terminalis
Periwinkle Vinca major
Plumbago Ceratostigna plumbaginoides
Pork and Beans Sedum x rubrotinctum
Rosea ice plant Drosanthemum floribundum
Rosemary, dwarf Rosmarinus officinalis var. Prostratus
St. Johnswort, creeping Hypericum calycinum
Stonecrop, sedum Sedum rubrotinctum
Verbena Verbena officinalis
Verbena, blue Verbena peruvianna
Table 14. Wildflowers Tolerant to Segment® II herbicide Applications1
Common Name Scientific Name
African daisy Dimorphotheca aurantiaca
Baby blue eyes Nemophila insignis
Baby snapdragon Linaria macrocanna
Baby’s breath Gypsophila muralis
Bachelor button Centaurea cyanus
Bird’s eyes Gilia tricolor
Black-eyed Susan Rudbeckia hirta
Blanketflower Gaillardia aristata
Blue fescue Festuca ovina glauca
Blue flax Linum lewisii
Butterflyweed Ascelpias tuberosa
Calendula Calendula officinalis
California poppy Eschscholzia californica
Calliopsis Coreopsis tinctoria
Candytuft Iberis sempervirens
(continued)

24
Table 14. Wildflowers Tolerant to Segment® II herbicide Applications1 (continued)
Common Name Scientific Name
Carnation Dianthus spp.
Catchfly Silene armeria
Chicory Chicory intybus
Chinese houses Collensia heterophylla
Columbine Aquilegia spp.
Corn poppy Papaver rhoeas
Cornflower Centaurea cyanus
Cosmos Cosmos bipinnatus
Dames rocket Hesperis matronalis
Drummond phlox Phlox drummondii
Dwarf primrose Oenothera spp.
Firewheel Gaillardia pulchella
Five spot cornflower Centaurea spp.
Foxglove Digitialis purpurea
Godetia Clarkia amoena
Grayhead coneflower Echinacea pallida
Hard fescue Festuca longifolium
Indian blanket Gaillardia pulchella
Indian paintbrush Castilleja coccinea
Jewels of Opar Talinum paniculatum
Johnny-jump-up Viola pedata
Lance-leaved coreopsis Coreopsis lanceolata
Lemon mint Monarda citriodora
Liatris Liatris spicata
Lupine Lupinus spp.
Moss verbena Verbena tenuisecta
New England aster Aster novi-anglae
Nodding catchfly pink Silene spp.
Oxeye daisy Chrysanthemum leucanthemum
Painted daisy Chrysanthemum carinatum
Perennial lupine Lupinus perennis
Plains coreopsis Coreopsis tinctoria
Prairie aster Machaeranthera tanacetifolia
Purple coneflower Echinacea purpurea
Purpleknot toadflax Linaria spp.
Queen Anne’s lace Daucus carota
Red ribbons Clarkia concinna
Rocket larkspur Delphinum ajacis
Sainfoin Onobrychis viciifolia
Sand bluebonnet Lupinus subcarnosus
Scarlet flax Linum rubrum
Showy primrose Oenothera speciosa
(continued)

25
Table 14. Wildflowers Tolerant to Segment® II herbicide Applications1 (continued)
Common Name Scientific Name
Siberian wallflower Cheiranthus spp.
Spurred snapdragon Linaria macrocanna
Stock Matthiola maritima
Sulfur cosmos Cosmos sulfureus
Sweet alyssum Lobularia maritima
Sweet William Dianthus barbatus
Texas bluebonnet Lupinus texensis
Tickseed Coreopsis lanceolate
Tidy tips Layia platyglossa
Virginian stock Malcolmia maritima
Wallflower Cheiranthus allionii
White yarrow Achillea millefolium
1 Apply Segment II PRIOR TO blooming.

26
© 2024 BASF Corporation
All rights reserved.
007969-00398.20220223c.NVA 2022-04-0550-0058
Supersedes: NVA 2016-04-550-0177
BASF Corporation
26 Davis Drive
Research Triangle Park, NC 27709
Basagran, Nutra-sol, and Segment are registered 
trademarks of BASF.
Neutralize is a trademark of BASF.
Goal and Stinger are registered trademarks of Dow 
Agrosciences LLC.
Tank Mix Partners
Basagran T&O Herbicide (bentazon), 
EPA Reg. No. 7969-326
Goal 2XL Herbicide (oxyflurofen) 
EPA Reg. No. 62719-424 
Stinger Herbicide (clopyralid), EPA Reg. No. 62719-73
Conditions of Sale and Warranty
The Directions For Use of this product reflect the 
 opinion of experts based on field use and tests. The 
 directions are believed to be reliable and must be 
followed carefully. However, it is impossible to eliminate 
all risks inherently associated with the use of this 
product. Crop injury, ineffectiveness or other unintended 
consequences may result because of such factors as 
weather conditions, presence of other materials, or use 
of the product in a manner inconsistent with its labeling, 
all of which are beyond the control of BASF 
CORPORATION (“BASF”) or the Seller. To the extent 
consistent with applicable law, all such risks shall be 
assumed by the Buyer.
BASF warrants that this product conforms to the 
chemical description on the label and is reasonably fit for 
the purposes referred to in the Directions For Use , 
subject to the inherent risks, referred to above.
TO THE EXTENT CONSISTENT WITH APPLICABLE 
LAW, BASF MAKES NO OTHER EXPRESS OR 
IMPLIED WARRANTY OF FITNESS OR 
 MERCHANTABILITY OR ANY OTHER EXPRESS OR 
IMPLIED WARRANTY.
TO THE EXTENT CONSISTENT WITH APPLICABLE 
LAW, BUYER’S EXCLUSIVE REMEDY AND BASF’S 
EXCLUSIVE LIABILITY, WHETHER IN CONTRACT, 
TORT, NEGLIGENCE, STRICT LIABILITY, OR 
 OTHERWISE, SHALL BE LIMITED TO REPAYMENT 
OF THE PURCHASE PRICE OF THE PRODUCT.
TO THE EXTENT CONSISTENT WITH APPLICABLE 
LAW, BASF AND THE SELLER DISCLAIM ANY 
 LIABILITY FOR CONSEQUENTIAL, EXEMPLARY, 
SPECIAL OR INDIRECT DAMAGES RESULTING 
FROM THE USE OR HANDLING OF THIS 
PRODUCT.
BASF and the Seller offer this product, and the Buyer 
and User accept it, subject to the foregoing Conditions 
of Sale and Warranty which may be varied only by 
 agreement in writing signed by a duly authorized 
representative of BASF. 
1108
Note to PM/reviewer: Making the product more 
restrictive than Federally accepted, incorporating the 
optional statement “Not for Use in California” may be 
included on the container label for any use, weed, or crop 
as deter mined to be necessary to secure Ca-DPR 
registration.