crop-chem-docs/corpus/epa_ppls/279-3158.md

# COMMAND 3ME MICROENCAPSULATED HERBICIDE

- EPA Reg No: **279-3158**
- Registrant: FMC CORPORATION
- Signal word: Caution
- Active ingredients: Clomazone (31.1%)
- Label accepted: 2026-07-07
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000279-03158-20260707.pdf

---
1
July 7, 2026
Nina L Mar
FMC Corporation
2929 Walnut Street
Philadelphia, PA 19104
Subject: PRIA Label Amendm ent – Adding post-emergence application to soybeans. Other
changes include the addition of fallow fields and incorporating SLN labels to
master label.
 Product Name: Command 3M E Microencapsulated Herbicide
 EPA Registration Number: 279-3158
 Application Date: 06/30/2025
 Case Number: 0062544
Dear Nina L Mar:
The amended label referred to above, submitted in connection with registration under the
Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), as amended, is acceptable. This
approval does not affect any conditions that were previously imposed on this registration. You
continue to be subject to existing conditions on your registration and any deadlines connected
with them.
A stamped copy of your labeling is enclosed for your records. This labeling supersedes all
previously accepted labeling. You must submit one copy of the final printed labeling before you
release the product for shipment with the new labeling. In accordance with 40 CFR 152.130(c),
you may distribute or sell this product under the previously approved labeling for 18 months
from the date of this letter. After 18 months, you may only distribute or sell this product if it
bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is
defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3.
Should you wish to add/retain a reference to the company’s website on your label, then please
be aware that the website becomes labeling under FIFRA and is subject to review by the
Agency. If the website is false or misleading, the product would be misbranded and unlawful to
sell or distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) lists examples of
statements EPA may consider false or misleading. In addition, regardless of whether a website
is referenced on your product’s label, claims made on the website may not substantially differ
from those claims approved through the registration process. Therefore, should the Agency find

Page 2 of 2
EPA Reg. No. 279-3158
Case No. 0062544
or if it is brought to our attention that a website contains false or misleading statements or
claims substantially differing from the EPA approved registration, the website will be referred
to the EPA’s Office of Enforcement and Compliance.
Your release for shipment of the product constitutes acceptance of these conditions. If these
conditions are not complied with, the registration will be subject to cancellation in accordance
with FIFRA section 6.
If you have any questions, please contact Francisco Llarena-Arias at llarena-
arias.francisco@epa.gov.
Nathan Mellor
Branch Chief
Fungicide Herbicide Branch
Registration division (7505T)
Enclosure

CLOMAZONE Group 13 HERBICIDE
Sold By
FMC Corporation
2929 Walnut Street.
Philadelphia, PA 19104 Net Contents: ___________
1
For Agricultural or Commercial Use Only NOT FOR USE IN CALIFORNIA
For control of weeds in Bean (dry and succulent), Brassica head and stem vegetable group 5-16, Chinese broccoli, Cottonseed
subgroup 20C, Cucurbit Vegetables Crop Group 9, Herb Subgroup 19A, Kohlrabi, Peas (Succulent), Peppermint tops, Peppers,
Rapeseed (canola varieties only), Rhubarb, Rice, Soybeans, Spearmint tops, Stalk and Stem Vegetable Subgroup 22A except
kohlrabi, Sugarcane, Tobacco, Tuberous and Corm Vegetables subgroup 1D except Potato, and Vegetable Soybean (Edamame).
EPA Reg. No. 279-3158 EPA Est. ______
Active Ingredient: By Wt.
Clomazone: 2-(2-Chlorophenyl)methyl-4,4-dimethyl-3 isoxazolidinone.……………………………...31.1%
Other Ingredients:...........................................................................................................................68.9%
 100.0%
Contains 3.0 pounds of active ingredient per gallon
KEEP OUT OF REACH OF CHILDREN
CAUTION
Si usted no entiende la etiqueta, busque a algulen para que se la explique a usted en detalle.
(If you DO NOT understand the label, find someone to explain it to you in detail.)
FIRST AID
If in Eyes:
x Hold eye open and rinse slowly and gently with water for 15-20 minutes.
x Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye.
x Call a poison control center or doctor for treatment advice.
If on Skin or Clothing:
x Take off contaminated clothing.
x Rinse skin immediately with plenty of water for 15-20 minutes.
x Call a poison control center or doctor for treatment advice.
If Swallowed:
x Call a poison control center or doctor immediately for treatment advice.
x Have person sip a glass by mouth of water if able to swallow.
x DO NOT induce vomiting unless told to do so by a poison control center or doctor.
x DO NOT give anything to an unconscious person.
If Inhaled:
x Move person to fresh air.
x If person is not breathing, call 911 or an ambulance, then give artificial respiration,
preferably mouth-to-mouth if possible.
x Call a poison control center or doctor for further treatment advice.
For Emergency Assistance Call (800) 331-3148.
See other panels for additional precautionary information.
07/07/2026
279-3158

2
PRECAUTIONARY STATEMENTS
Hazards to Humans (and Domestic Animals)

Caution
Causes moderate eye irritation. Avoid contact with eyes or clothing. Prolonged or frequently repeated skin contact may cause allergic reactions in
some individuals.
Personal Protective Equipment:
Applicators and other handlers must wear:
x Long-sleeved shirt and long pants;
x Chemical-resistant gloves; Barrier Laminate or Butyl Rubber, or Nitrile Rubber or Viton;
x Shoes plus socks.
Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product's concentrate. DO NOT reuse
them. Follow manufacturer's instructions for cleaning/ maintaining PPE. If no such instructions for washables exists, use deter gent and hot water.
Keep and wash PPE separately from other laundry.
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Prote ction Standard
(WPS) for agricultural pesticides [40 CFR 170.240 (d) (4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS.
USER SAFETY RECOMMENDATIONS:
Users should:
x Wash hands thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco, or using the toilet.
x Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
x Remove PPE immediately after handling this product. Wash outside of gloves before removing. As soon as possible, wash thoroughly
and change into clean clothing.

Environmental Hazards
DO NOT apply directly to water, to areas where surface water is present, or to intertidal areas below the mean high water mark.
DO NOT apply when weather conditions favor drift from the area treated.
DO NOT apply where runoff is likely to occur.
DO NOT contaminate water when disposing of equipment, wash waters, or rinsate. Apply this product only as specified on this label.

Physical/Chemical Hazards
DO NOT use or store near heat or open flame.

Non-target Organism Advisory Statement
This product is toxic to plants and may adversely impact the forage and habitat of non-target organisms, including pollinators, in areas adjacent to
the treated site. Protect the forage and habitat of non-target organisms by following label directions intended to minimize spray drift.

PRECAUTIONS
Off-site movement of spray drift or vapors of Command® 3ME Microencapsulated Herbicide can cause foliar whitening or yellowing of sensitive
plants.
This product is toxic to plants and may adversely impact the forage and habitat of non-target organisms, including pollinators, in areas adjacent to
the treated site. Protect the forage and habitat of non-target organisms by following label directions intended to minimize spray drift.

DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
DO NOT apply this product by air or through any type of irrigation system.
DO NOT apply this product in a way that will contact workers or other people, either directly or through drift. Only protected handlers may be in the area
during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation.
Prior to making applications, read and strictly follow all precautions and instructions in the APPLICATION DIRECTIONS, BUFFER & APPLICATION
RESTRICTIONS and MANDATORY SPRAY DRIFT sections.

AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This Standard contains
requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricu ltural pesticides. It
contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instruct ions and exceptions
pertaining to the statements on this label about personal protective equipment (PPE), and restricted- entry interval. The requirements in this box
only apply to uses of this product that are covered by the Worker Protection Standard.
DO NOT enter or allow worker entry into treated areas during the Restricted Entry Interval (REI) of 12 hours.
Exception: if the product is soil-injected or soil -incorporated, the Worker Protection Standard, under certain circumstances, allows workers to
enter the treated area if there will be no contact with anything that has been treated.
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that
has been treated, such as plants, soil, or water, is:
x Coveralls
x Chemical-resistant gloves
x Barrier Laminate or Butyl Rubber, or Nitrile Rubber or Viton
x Shoes plus socks.

3
APPLICATION DIRECTIONS IMPORTANT
FAILURE TO OBSERVE THE DIRECTIONS IN THIS SECTION OF THE LABEL MAY RESULT IN INJURY TO SENSITIVE PLANTS
x The microencapsulation of clomazone, the active ingredient in Command 3ME Microencapsulated Herbicide, is intended to minimiz e
movement away from the site of application. Avoid making applications when spray particles may be carried by air currents to areas
where sensitive crops and plants are growing. Leave an adequate buffer zone between the area to be treated and desirable plants.
x PRECAUTIONS: Foliar contact with spray drift or vapors may cause foliar whitening or yellowing of sensitive plants. Symptoms are
generally temporary in nature but may persist on some plant species.
Application restrictions must be taken as follows:
x Observe all buffer restrictions.
x Before application, determine air movement and direction.
Refer to individual crop use directions for additional requirements.

Buffer Restrictions
x DO NOT apply within 300 feet of downwind crops and desirable non-target plants.
x DO NOT apply within 1.200 feet of Towns and Housing Developments, Commercial Fruit, Nut or Vegetable Production1, Commercial
Greenhouses or Nurseries.
1 Except for vegetable crops labeled for use on the Command 3ME Microencapsulated Herbicide label.

Application Restrictions
x DO NOT apply this product by air or through irrigation equipment l
x DO NOT apply Command 3ME Microencapsulated Herbicide to non- field areas including fence rows, waterways, ditches, and
roadsides.
x When moving spray equipment to noncontiguous sites, DO NOT allow spray solution to spray or drip from tanks, hoses, fittings or
spray nozzles and tips.
x DO NOT apply when weather conditions favor drift.

MANDATORY SPRAY DRIFT MANAGEMENT
GROUND BOOM APPLICATION
x User must only apply with the nozzle height recommended by the manufacturer, but no more than 4 feet above the ground or crop
canopy.
x Applicators are required to use a Coarse or coarser droplet size (ASABE S572.1).
x DO NOT apply when wind speeds exceed 15 miles per hour at the application site.
x DO NOT apply during temperature inversions.

SPRAY DRIFT MANAGEMENT ADVISORIES
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT.
BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS.
IMPORTANCE OF DROPLET SIZE
An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide target pest control. While applying larger droplets will
reduce spray drift, the potential for drift will be greater if applications are made improperly or under unfavorable environmental conditions.
Controlling Droplet Size - Ground Boom
x Volume - Increasing the spray volume so that lar ger droplets are produced will reduce spray drift. Use the highest practical spray
volume for the application. If a greater spray volume is needed, consider using a nozzle with a higher flow rate.
x Pressure - Use the lowest spray pressure recommended for the nozzle to produce the target spray volume and droplet size.
x Spray Nozzle -Use a spray nozzle that is designed for the intended application. Consider using nozzles designed to reduce drift.
BOOM HEIGHT - Ground Boom
For ground equipment, the boom should remain level with the crop and have minimal bounce.
SHIELDED SPRAYERS
Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify that the shields are not interfering with the
uniform deposition of the spray on the target area.
TEMPERATURE AND HUMIDITY
When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation.
TEMPERATURE INVERSIONS
Drift potential is high during a temperature inversion. Temperat ure inversions are characterized by increasing temperature with altitude and are
common on nights with limited cloud cover and light to no wind. The presence of an inversion can be indicated by ground fog or by the movement
of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (un der low wind
conditions) indicates an inversion, while smoke that moves upwar d and rapidly dissipates indicates good vertical air mixing. Av oid applications
during temperature inversions.
WIND
Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND CONDITIONS. Applicators need to be familiar
with local wind patterns and terrain that could affect spray drift.

4

MIXING AND HANDLING INSTRUCTIONS FOR BULK/MINI-BULK CONTAINERS
Equipment Requirements:
Command 3ME Microencapsulated Herbicide is a Microencapsulated Herb icide and requires a diaphragm type pump in order to maintai n product
quality.
Dispensing Instructions:
When ready to dispense Command 3ME Microencapsulated Herbicide fr om the container, the applicator needs to recirculate the prod uct in the
container, if the product has settled or separated, for approximately 5 minutes or until the product is thoroughly turned over. Once the product is
thoroughly recirculated, the applicator may then begin the process of dispensing Command 3ME Microencapsulated Herbicide into the spray tank,
loading or mixing system.
RESTRICTIONS
x DO NOT use gear or piston-type pumps
x The dealer/applicator must wear proper clothing/PPE as listed under Agricultural Use Requirements section above.

MIXING AND LOADING INSTRUCTIONS
Care must be taken when mixing Command 3ME Microencapsulated Herbicide. Avoid mixing in areas adjacent to desirable plants. Movement
from spray drift, vapors or runoff can cause bleaching or chlorosis of sensitive plants.
Command 3ME Microencapsulated Herbicide Alone: Mix Command 3ME Microencapsulated Herbicide with water or liquid fertilizer in the
following manner: Fill the spray tank one-half to three-fourths full with water or liquid fertilizer, add the proper amount of Command 3ME
Microencapsulated Herbicide, then add the rest of the water or liquid fertilizer. Provide sufficient agitation during and throu ghout mixing and
application to maintain a uniform spray mixture.
Tank Mixtures: It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the
applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive
directions for use and precautionary statements of each product in the tank mixture.
1. Add 1/4 to 1/2 of the required amount of clean water and/or fertilizer to the spray or mixing tank.
2. While maintaining agitation, continue filling the spray tank. When the spray tank is 3/4 full, add any dry formulation (DF, WG) tank mix
partners and allow them to completely and uniformly disperse.
3. Add the required amount of Command 3ME Microencapsulated Herbicide to the spray tank while maintaining agitation. After the product
has completely and uniformly dispersed into the tank mix, add any other liquid tank mix partners and allow them to completely and
uniformly disperse.
4. Add the proper amount of spray adjuvant and continue agitation while adding the remaining water and/or fertilizer.
5. Complete filling the tank with clean water and/or fertilizer and always maintain sufficient agitation to ensure surface action until the
mixture is uniform.
6. After use, thoroughly clean the sprayer according to this label (see Cleaning Spray Equipment) and any tank mix partner labe ls.
Fertilizer Spray Mixtures: Applications of Command 3ME Microencapsulated Herbicide alone, or with labeled tank mix partners, in
conjunction with fertilizer solutions may be used unless any label use direction specifically states otherwise. Small quantities need to be tested
for compatibility by the following procedure before mixing tankful quantities.
Compatibility Test
A jar test is advised before mixing to ensure Command 3ME Microencapsulated Herbicide compatibility with tank mix partners and adjuvants.
The following test assumes a spray volume of 25 gallons per acre. For other spray volumes, make appropriate changes in the ingredient rates.
1. Add 1.0 pt. of water to each of 2 one-quart jars. Note: Use the same source of water and the other components in the compatibility test
that will actually be tank mixed and applied. It is important that all components are mixed at a temperature similar to the temperature of
those used for the actual application.
2. To one of the jars, add 1/4 tsp. or 1.2 milliliters of a compatibility agent approved for this use (1/4 tsp. is equivalent to 2 pt/100 gallons
spray). Shake or stir gently to mix.
3. To both jars, add the appropriate amount of herbicide(s). If more than one herbicide is used, add them separately in this order 1) dry
herbicides, 2) flowables, then 3) emulsifiable concentrates. Finally, add the appropriate amount of any adjuvants that will be used. After
each addition, shake or stir gently to thoroughly mix.
a. Dry Herbicides and Adjuvants: For each pound to be applied per acre, add 1.4 tsp. to each jar.
b. Liquid Herbicides and Adjuvants: For each pint to be applied per acre, add 0.5 tsp. or 2.5 milliliters to each jar.
4. After adding all ingredients for the tank mixture, replace and tighten lids. Shake jars by inverting the mixture and then let stand for 15 to
30 minutes.
5. After waiting period, check jars for separation, precipitates, flakes, films on the side, gels or other signs of incompatibility. If mixtures
separate but can be remixed, the mixture can be sprayed as long as good agitation is used.
6. If the mixtures are incompatible, then try these methods to overcome the problem. A) Make a slurry of dry pesticides in water before
adding them to the tank B) Add a compatibility agent or increase the water volume of the mixture.
7. If tank mixtures are incompatible, then DO NOT spray the mixture. (Properly dispose of testing jars and any pesticide waste).

SPRAYER CLEANUP
DO NOT drain or flush equipment on or near desirable trees or other plants, or in areas where their roots may extend or in locations where the
chemical may be washed or move into contact with their roots. DO NOT contaminate any body of water including irrigation water that may be
used on other crops. Carefully follow sprayer clean-up instructions noted below to prevent spray tank residues from damaging other crops.
Sprayer equipment needs to be thoroughly rinsed to remove residues of herbicide that might injure other subsequently sprayed cr ops. The
steps below need to be followed for the thorough rinsing of spray equipment following applications of Command 3ME Microencapsul ated
Herbicide alone or tank mixed with other labeled products.

5
1. Drain any remaining spray solution from tank, pump, hoses and boom and discard in an approved manner (See Note that follows).
2. Clean tank and fittings by:
x Thoroughly hosing down the inside walls of the spray tank with a quantity of water equal to 1/8 of the total tank capacity and
operating the pump to circulate this solution through the sprayer system for 15 minutes.
x Washing down the outside surfaces of equipment.
x Removing nozzle tip and screen from end nozzle in each boom section and allowing several gallons of rinsate solution to flush
completely through boom (collect rinsate while flushing).
3. Thoroughly drain remaining rinsate solution from tank, pump and hoses. Combine with boom flushing and dispose of all rinsates f rom
this first rinsing in an approved manner (see Note that follows).
4. When switching from water dilutions to applications utilizing crop oil or liquid fertilizer as a carrier, a small volume of cro p oil or liquid
fertilizer need to be flushed through the tank, pump, hoses, and boom prior to the next use. Dispose of crop oil or liquid fertilizer rinsate
in an approved manner (see Note for local, state and federal guidelines).
5. Remove the remaining nozzle tips, and screens and the line filter and wash in a pail of warm soapy water, thoroughly rinse and
replace.
6. Hose down the inside walls of the spray tank a second time and circulate this solution using the same procedure as noted in #2 above.
7. If the next use of the sprayer will be for applying a preplant in corporated or preemergence pesticide on any crop for which Com mand 3ME
Microencapsulated Herbicide is registered, rinsate from this second rinsing may be utilized by diluting with the water for the next pesticide
load. When Command 3ME Microencapsulated Herbicide is used in tank mixture with other labeled herbicide(s), refer to the dispos al
directions for the most restrictive herbicide in the tank mixture.
HOWEVER
If the next use of the sprayer will be a postemergence pesticide applied on any crop, drain rinsate solution from this second rinsing. Rinsate
solution from the second tank rinse may only be applied to crops in accordance with labeled use directions for Command 3ME Micr oencapsulated
Herbicide. When used in tank mixture with other labeled herbicid es, follow the most restrictive sprayer cleanup use directions. Refill tank (after
draining second rinsate solution) in accordance with postemergence product label directions.

NOTE: Dispose of excess spray mixture and/or rinsate from first tank rinsing by application to registered crops as described on this label. If
excess spray mixture and/or rinsate from first rinsing cannot be disposed of according to label instructions, dispose of in compliance with local,
state and federal guidelines. Contact your state pesticide or Environmental Control Agency or the Hazardous Waste representativ e at the
nearest EPA regional office for guidance.

APPLICATION INSTRUCTIONS
Ground Applications
Broadcast or Banded Applications: Apply Command 3ME Microencapsulated Herbicide alone or in tank mix combinations by ground equipment
using a finished spray volume of 10 to 40 gallons of water per acre. Use nozzles suitable for broadcast boom or banded applicat ion of herbicides.
See “APPLICATION DIRECTIONS”, “BUFFER & APPLICATION RESTRICTIONS” and “MANDATORY SPRAY DRIFT” sections for specific
instructions to reduce spray drift. For Command 3ME Microencapsulated Herbicide tank mixtures with wettable powder or dry flowa ble
formulations, nozzle screens and strainers need to be no finer than 50-mesh.

Banded Applications—Calculate the rates and volumes required by using the following formulas:

Banded rate per acre = Band Width in Inches X Broadcast rate per acre Row Width in Inches

Banded volume per acre =
Band Width in Inches
X Broadcast volume per acre
Row Width in Inches
Cultivation After Planting
If cultivation is necessary because of soil crusting, compaction, or weed emergence, soil treated with Command 3ME Microencapsulated Herbicide
may be shallow-cultivated (no deeper than 1.5 - 2”) or rotary-hoed without reducing the efficacy of Command 3ME Microencapsulat ed Herbicide.
Avoid deep cultivation which may bring untreated soil to the surface and result in poor weed control.

6
Table 1. PRODUCT USE RATE TO ACTIVE INGREDIENT CONVERSION CHART
Command 3ME Microencapsulated
Herbicide Use Rate
(fl oz./A)
Clomazone Active Ingredient Per Acre
(lb ai/A)
3.0 0.07
4.0 0.09
4.5 0.11
6.0 0.14
8.0 0.19
8.5 0.20
10.7 0.25
11.0 0.26
12.8 0.30
14.0 0.33
15.0 0.35
16.0 0.38
17.0 0.40
21.3 0.50
24.0 0.56
25.0 0.59
28.0 0.66
32.0 0.75
34.0 0.80
42.7 1.00
48.0 1.12
53.0 1.25
64.0 1.50
Table 2. RATE SELECTION BY SOIL TEXTURE.
Unless a specific soil texture is mentioned, application rates for ROW CROPS refer to Table 2 for soil texture groups: coarse, medium and fine.
Table 2 includes a complete listing of soil textures included in each of the soil texture groupings.

Coarse Medium Fine
Sand, Loamy sand and Sandy
loam
Loam, Silt loam, Sandy clay
loam and Silt
Sandy clay, Silty clay loam,
Silty clay, Clay loam and Clay

WEED RESISTANCE MANAGEMENT
Command 3ME Microencapsulated Herbicide, which contains the active ingredient clomazone is a group 13 herbicide based on the mode of action
(MOA) classification system of the Weed Science Society of America.
Proactively implementing diversified weed control strategies to minimize selection for weed populations resistant to one or more herbicides is a best
practice. A diversified weed management program may include the use of multiple herbicides with different sites of action and o verlapping weed
spectrum with or without tillage operations and/or other cultural practices. Research has demonstrated that using the labeled rate and directions for
use is important to delay the selection for resistance.
The continued effectiveness of this product depends on the successful implementation of a weed re sistance management program. T o aid in the
prevention of developing weeds resistant to this product, users should:
x Scout fields before application to ensure herbicides and rates will be appropriate for the weed species and weed sizes present.
x Start with a clean field, using either a burndown herbicide application or tillage.
x Control weeds early when they are relatively small (less than 4 inches) with a postemergence herbicide.
x To minimize resistance, apply full labeled rates of Command 3ME Microencapsulated Herbicide.
x Scout fields after application to detect weed escapes or shifts in control of weed species.
x Control weed escapes before they reproduce by seed or proliferate vegetatively.
x Report any incidence of non-performance of this product against a particular weed to your FMC representative, consultant, local retailer,
or county extension agent.
x Contact your FMC representative, crop advisor, or extension agent to find out if suspected resistant weeds to this MOA have bee n found
in your region.
x If resistant biotypes of target weeds have been reported, use the application rates of this product specified for your local conditions. Tank
mix products so that there are multiple effective sites of actions for each target weed.
x If resistance is suspected, treat weed escapes with an herbicide having a site of action other than Group 13 and/or use nonchem ical
methods to remove escapes, as practical, with the goal of preventing further seed production.
x Suspected herbicide-resistant weeds may be identified by these indicators:
- Failure to control a weed species normally controlled by the herbicide at the dose applied, especially if control is achieved on
adjacent weeds.
- A spreading patch of non-controlled plants of a particular weed species; and
- Surviving plants mixed with controlled individuals of the same species.

7
x Additionally, users should follow as many of the following herbicide resistance management practices as is practical:
- Use a broad-spectrum soil-applied herbicide with other sites of action as a foundation in a weed control program.
- Utilize sequential applications of herbicides with alternative sites of action.
- Rotate the use of this product with non-Group 13 mode of action herbicides.
- Avoid making more than two applications of Command 3ME Microencapsulated Herbicide and any other Group 13 herbicides
within a single growing season unless mixed with an herbicide with a different site of action with an overlapping spectrum for
the difficult-to-control weeds.
- Incorporate non-chemical weed control practices, such as mechanical cultivation, crop rotation, cover crops and weed-free
crop seeds, as part of an integrated weed control program.
- Use good agronomic principles that enhance crop development and crop competitiveness.
- Thoroughly clean plant residues from equipment before leaving fields suspected to contain resistant weeds.
- Manage weeds in and around fields during and after harvest to reduce weed seed production.

Table 3. Weeds Controlled by Command 3ME Microencapsulated Herbicide APPLIED
ALONE1 at row crop application rates.
12.8 to 22 fl oz/A
(0.30 to 0.52 lb ai/A)
23 to 32 fl oz/A
(0.54 to 0.75 lb ai/A)
33 to 43 fl oz/A
(0.77 to 1.0 lb ai/A)
44 to 64 fl oz/A
(1.0 to 1.5 lb ai/A)
Grasses
Barnyardgrass
Bluegrass, Annual
Broadleaf Signalgrass
Crabgrass
 - Large
 - Smooth
Foxtail
 - Giant
 - Green
 - Robust
 - Yellow
Goosegrass
Panicum
 - Common
 - Fall
 - Texas
Ryegrass, Italian
2

Broadleaves
Anoda, Spurred3
Galinsoga spp.
Henbit
Sida, Prickly (teaweed)*
Shepherd’s-purse
Velvetleaf3
Grasses
All grasses controlled at
12.8 to 22 fl oz/A plus:
Johnsongrass (seedling)
Ryegrass, Italian
Sandbur, Field*

Broadleaves
All broadleaves controlled at
12.8 to 22 fl oz/A plus:
Dock, Curly
Jimsonweed*
Ladysthumb
Lambsquarters, Common*
Mallow, Venice
Nightshade, Hairy*
Pineappleweed*
Ragweed, Common*
Sida, Prickly (teaweed)
Purslane
Redweed
Vetch, Hairy*
Grasses
All grasses controlled at
23 to 32 fl oz/A plus:
Bermudagrass*
Cupgrass
 - Southwestern
 - Woolly
Shattercane*

Broadleaves
All broadleaves controlled at
23 to 32 fl oz/A plus:
Beggarweed, Florida
Croton, Tropic
Dayflower, Spreading
Dogbane, Hemp (seedling)*4
Kochia*
Jimsonweed
Lambsquarters, Common
Pigweed
 - Redroot*
 - Smooth*
Pineappleweed
Plantain, Blackseed
Poinsettia, Wild
5
Pokeweed, Common*4
Pusley, Florida
Redvine*
Smartweed*, Pennsylvania
Sweetclover, Yellow
Thistle, Canada
4
Vetch, Hairy
Grasses
All grasses controlled at
33 to 43 fl oz/A plus:
Itchgrass6
Junglerice*
Millet, Wild Proso*

Broadleaves
All broadleaves controlled at
33 to 43 fl oz/A plus:
Balloonvine
Cocklebur, Common*
Jointvetch*
Kochia
Morningglory
 - Palmleaf
 - Pitted
Nightshade
 - Black*
 - Hairy
Parthenium, Ragweed (seedling)
Ragweed, Common
Spurge, Prostrate

*Partially Controlled
1 Weed control with Command 3ME Microencapsulated Herbicide can vary and is highly influenced by a combination of soil texture, C EC, soil moisture and application rate.
Experience from previous use is important for determining product use rate selection to ensure optimum weed control and avoid e xcessive crop chlorosis or bleaching. Use higher
label rates based on soil texture criteria for fields with a history of heavy weed pressure and for extended residual weed cont rol. For target weed species in fields that have previously
been in conservation programs or where heavy weed pressure is anticipated and/or based on previous use history and performance. For fields that have previously been in
conservation programs, use a minimum application rate of 53 fl oz/A for cocklebur or common ragweed control.
2 Italian ryegrass control from 16+ fl oz/A on coarse soils only.
3 For heavy weed pressure or heavy soil textures, use 27 fl oz/A to control velvetleaf or spurred anoda.
4 At 32 fl oz/A use rate.
5 Use in AR/LA/MS/TX/OK only—for high pressure and heavy soils use 53 fl oz/A.
6 For suppression/control of itchgrass, DO NOT incorporate Command 3ME Microencapsulated Herbicide. For high weed pressure and heavy soils use 53.3 fl oz/A.

8
Table 4. ROTATIONAL CROP RESTRICTIONS
Rotate to crops as listed below. Refer to ROTATIONAL CROPPING PRECAUTIONS below for additional information.
NOTE: When using Command 3ME Microencapsulated Herbicide with other registered herbicides always refer to and follow the Rotational R estrictions and
Directions for Use of the most restrictive product’s label.
≤21 fl oz/A
(0.50 lb ai/A)
21 to 43 fl oz/A
(0.50 to 1.0 lb ai/A)
43 to 53.3 fl oz/A
(1.0 to 1.25 lb ai/A)
ANYTIME ANYTIME ANYTIME
Cabbage (transplanted)
Cotton*
Peas
Peppers
Potato, Sweet
Pumpkins (processing)
Rice
Soybeans
Squash
Tobacco
Tuberous & Corm Vegetables
Cotton*
Peppers
Potato, Sweet
Rice
Soybeans
Squash (winter) (up to 32 fl oz/A)
Tobacco
Tuberous & Corm Vegetables
Cotton*
Potato, Sweet
Soybeans
Tobacco
Tuberous & Corm Vegetables
9 MONTHS 9 MONTHS 9 MONTHS
All crops listed above plus:
Beans, Dry
Beans, Snap
Beets, Sugar
Cabbage (direct seeded)
Corn
 - Field
 - Pop
 - Seed
 - Sweet
Cotton
Cucurbits
Peanuts
Potatoes
Sorghum
Tomatoes (transplanted)
All crops listed above plus:
Beans, Dry
Beans, Snap
Beets, Sugar
Cabbage
Corn
 - Field
Cotton
Cucurbits
Peanuts
Peas
Potatoes
Pumpkins (processing)
Rice
Sorghum
Squash (summer)
Tomatoes (Transplanted)
All crops listed above plus:
Beans, Dry
Beans, Snap
Beets, Sugar
Cabbage
Cotton
Cucurbits
Peanuts
Peas
Peppers
Potatoes
Pumpkins (processing)
Rice
Sorghum
Squash
Tomatoes (Transplanted)
12 MONTHS 12 MONTHS 12 MONTHS
All crops not listed
Corn
 - Pop
 - Seed
 - Sweet
All other crops not listed
Corn
 - Field
 - Pop
 - Seed
 - Sweet
All other crops not listed
* Refer to the “Requirements for Planting Time Applications” and “Replanting Instructions” in the Cotton Directions for Use sec tion.
Cover crops may be planted anytime, however be advised stand reductions may occur. It is advisable to increase seeding rate 20 to 25% if
carryover potential is suspected as outlined under ROTATIONAL CROPPING PRECAUTIONS below.
DO NOT graze or harvest for food or feed cover crops planted less than 9 months after Command 3ME Microencapsulated Herbicide
treatment. DO NOT allow livestock to graze on treated vegetation, or feed treated vegetation or trash to livestock.

ROTATIONAL CROPPING PRECAUTIONS
Under certain conditions, temporary whiten ing or yellowing of leaves may occur on app roved rotational crops where undesirable s oil residues of
Command 3ME Microencapsulated Herbicide exist.
The following factors can contribute to increased risk of injury to rotational crops:
1. Over-application resulting from use of worn nozzles, excessive over-lapping of spray swaths, failing to shut off spray booms when turning
(end row areas) or slowing or stopping sprayer.
2. Soil pH ≤5.9.
3. Extreme dryness in the four months following application.
4. Choice of rotational crop hybrid.
Additional instructions to prevent rotational crop injury may be provided in the form of service bulletins for locations where risk of injury is
significantly increased due to extremely dry conditions.
Refer to Rotational Crop Instructions and Replanting Instructions of specific crops for additional crop planting information.

9

FALLOW APPLICATION
PRODUCT INFORMATION
Command 3ME Microencapsulated Herbicide may be used as a residual preemergence treatment in all tillage systems to control Ital ian ryegrass
and other labeled weeds during the fallow per iod following crop harvest and before the following labeled crop is planted. The f all application will
need to be followed with a suitable in-season preemergence or post emergence herbicide treatment to provide season long control of the complete
target weed spectrum in the following crop.
For weeds emerging prior to Command 3ME Microencapsulated Herbicide application, tank mixing with a burndown herbicide labeled to control the
target weeds present is necessary. To broaden the weed control spectrum, tank mixing with flumioxazin or metribuzin at labeled rates are effective
options. Follow all label directions, rates, restrictions and precautions on the tank mix herbicide partner labeling.
Application rates vary by soil texture. For coarse textured soils and low CEC soils, apply 12 to 16 fl oz/A (0.27 to 0.38 lb ai /A). For medium texture
soils, apply 16 to 24 fl oz/A (0.38 to 0.56 lbs. ai/A). For fine or heavy soil textures, apply 21 to 28 fl oz/A product (0.49 to 0.66 lb ai/A).
For conventional tillage systems where post-harvest tillage is used to prepare for planting the following spring, it is best to allow rainfall to settle the
beds prior to Command 3ME Microencapsulated Herbicide application. Optimum performance and residual weed control are achieved when the 4-
inch soil depth temperatures are decreasing and are expected to be sustained at less than 55º F and prior to the ground freezing.
PRECAUTIONS
x Application of Command 3ME Microencapsulated Herbicide to fields which have been precision leveled with deep cuts may result i n rice
crop injury including stand loss in the spring following the fall fallow application of Command 3ME Microencapsulated Herbicide. Consult
with rice specialists for soil amending practices which can reduce potential for herbicide injury in precision leveled fields.
x Some conditions may lead to temporary whit ening or yellowing of leaves in approved rota tional crops where soil residues of Com mand
3ME Microencapsulated Herbicide exist. Factors that contribute to carryover include, but are not limited to, over-application, soil pH ≤
5.9, extreme dryness in the four months following application, and/or choice of crop cultivar/hybrid.
ROTATIONAL CROP RESTRICTIONS
Rotate to crops as listed under Table 4. Rotational Crop Restrictions.
Cover crops may be planted anytime but stand reductions may occur in some areas. Refer to the ROTATIONAL CROP RESTRICTIONS tabl e
footnote for more information.
RESTRICTIONS

x DO NOT make more than 1 fallow application per season.
x For coarse textured soils or low CEC soils, do not apply more than 16 fl oz/A (0.38 lb ai/A)
x For medium textured soils do not apply more than 24 fl oz/A (0.56 lb ai/A).
x For fine textured soils do not apply more than 28 fl oz/A (0.66 lb ai/A).
x DO NOT apply more than a maximum cumulative amount of Command 3ME microencapsulated herbicide or any product containing
clomazone in a 12-month period per crop listed on this label.
x Follow all Rotational Crop Restrictions listed in Table 4 and Table 8 on this label.
x DO NOT graze or harvest for food or feed cover crops planted less than 9 months after Command 3ME Microencapsulated Herbicide
treatment.
x DO NOT apply to frozen or snow-covered soil
x DO NOT apply on coarse or medium textured soils when planting rice the following spring.
x DO NOT apply to fallow fields in which concurrent crayfish or catfish farming is included in the cultural practices.
x DO NOT replant treated fields with any crop at intervals that are inconsistent with the ROTATIONAL CROP RESTRICTIONS on the
Command 3ME Microencapsulated Herbicide label.

ROW CROPS
COTTONSEED SUBGROUP 20C:
Cotton, Cottonseed; cultivars, hybrids, and/or varieties of these
PRODUCT INFORMATION
Command 3ME Microencapsulated Herbicide may be applied, as a pr e-emergence banded or broadcast treatment in conventional tillag e or
conservation tillage systems for the control of annual grasses and broadleaf weeds in cottonseed subgroup 20C that includes cot ton, cottonseed,
cultivars, hybrids, and/or varieties.
REQUIREMENTS FOR PLANTING TIME APPLICATIONS
Failure to apply either disulfoton or phorate insecticides with Co mmand 3ME Microencapsulated Herbicide in accordance with in-f urrow label use
directions can result in crop phytotoxicity (bleaching) and/or stan d reduction. Combinations of at planting systemic granular c arbamate and
organophosphate insecticides in conjunction with Command 3ME Microencapsulated Herbicide may result in injury to cotton. Crop injury may occur
with higher Command 3ME Microencapsulated Herbicide rates on sandy soils. Diuron is not advised at planting when Command 3ME
Microencapsulated Herbicide is used as plant injury may result.
Refer to the insecticide product labels for appropriate in-furro w application directions and maximu m use rates. Monitor applica tion equipment to
ensure accurate and uniform placement of the insecticide.

10
APPLICATION TIMINGS
Preemergence
Command 3ME Microencapsulated Herbicide may be surface applied at 12 to 53 fl oz./A (0.27 to 1.24 lb ai/A) prior to planting wh en
REQUIREMENTS FOR PLANTING TIME APPLICATION instructions above are observed. Refer to Table 3 to determine use rate for the
target weed species present. Select higher use rates as soil texture progresses from coarse to heavy texture, for heavy weed po pulations
and/or when extended residual weed control is needed.
PREEMERGENCE BANDED APPLICATIONS
For preemergence banded treatments, refer to the directions for banded applications in the APPLICATION INSTRUCTIONS section.
TANK MIXTURES
Command 3ME Microencapsulated Herbicide may be applied in combination with other herbicides registered for use in cotton to broaden the weed
control spectrum. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the
applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive
directions for use and precautionary statements of each product in the tank mixture.

REPLANTING INSTRUCTIONS
If the initial planting of cotton fails to produce a uniform stand, cotton may be replanted in fields treated with Command 3ME Microencapsulated
Herbicide alone. When tank mixing with a labeled product, refer to the replant instructions for that product.
DO NOT replant treated fields with any crop at intervals that are inconsistent with the ROTATIONAL CROP RESTRICTIONS on the Command
3ME Microencapsulated Herbicide label.
Where a tank mix is used, refer to the product’s labels for any additional replant instructions.
If replanting is required, follow the directions under REQUIREMENTS FOR PLANTING TIME APPLICATIONS above.
ROTATIONAL CROP RESTRICTIONS
Rotate to crops as listed under Table 4. Rotational Crop Restrictions.
Cover crops may be planted anytime but stand reductions may occur in some areas. Refer to the ROTATIONAL CROP RESTRICTIONS tabl e
footnote for more information.
RESTRICTIONS
x DO NOT apply more than 53 fl oz/A (1.25 lb ai/A) of Command 3ME Microencapsulated Herbicide per year.
x DO NOT apply more than 53 fl oz/A (1.25 lb ai/A) of Command 3ME Microencapsulated Herbicide per application.
x DO NOT incorporate tank mixtures of Command 3ME Microencapsulated Herbicide and other herbicides.
x DO NOT allow livestock to graze on treated cotton forage or trash, or feed treated cotton forage or trash to livestock.
x DO NOT graze or harvest for food or feed cover crops planted less than 9 months after Command 3ME Microencapsulated Herbicide
treatment.
x DO NOT apply Command 3ME Microencapsulated Herbicide to cotton unless wither disulfoton or phorate organophosphate insecticide is
applied in-furrow with the seed at planting time at a minimum of 0.75 lb ai/A.
x DO NOT reduce the application rate of the organophosphate insecticide when Command 3ME Microencapsulated Herbicide is applied as
a banded treatment.
x DO NOT apply more than one application per year.
x Preharvest interval (PHI): DO NOT apply Command 3ME Microencapsulated Herbicide within 65 days of harvest.

RICE
PRODUCT INFORMATION
Command 3ME Microencapsulated Herbicide provides foundational control of grass weeds in rice when applied preemergence to weeds. For grass
weeds emerging prior to application, tank mix with a postemergence herbicide labeled for control of the target weed species present.
APPLICATION TIMINGS
Dry-seeded rice
x Early Preplant (EPP) and Preemerg ence Surface Broadcast Application. Command 3ME Microencapsulated Herbicide may be
applied as a surface broadcast application 14 days prior to planti ng or up to 7 days after planting, but prior to weed emergenc e, using
ground equipment in a minimum of 10 to 40 gallons of water per acre according to the rate by soil texture table below. Command 3ME
Microencapsulated Herbicide may be utilized as a surface broadcas t treatment prior to weed emer gence, for the control of annual grass
weeds in dry-seeded rice.
x Early Postemergence Broadcast Application. Command 3ME Microencapsulated Herbicide may be applied after planting as an early
postemergence treatment to rice through the five-leaf stage to provide preemergence and residual control of grass weeds. Use gr ound
equipment with nozzles that produce a coarse spray and a minimum of 10 to 40 gallons of water per acre. Refer to Table 3 for a list of
weeds controlled. For control of existing grass present at the time of application, include a postemergence herbicide registere d for the
control of the target grass species present. Consult the posteme rgence herbicide label for specific directions regarding use ra tes, stage
of weeds and crop.
x Sequential Applications. Preemergence surface broadcast applications followed by early postemergence applications (through the 5-
leaf stage) of Command 3ME Microencapsulated Herbicide may be made during the same season to control labeled weeds as long as
the total yearly application does not exceed 34.1 fl oz./A (0.8 lb ai/A) of product. Refer to the table below for specific rates.
 Water-seeded rice
x Command 3ME Microencapsulated Herbicide may be applied to water seeded rice 14 days prior to planting or during rice pegging u p to
re-flooding but prior to grass emergence.

11
Table 5. Command 3ME Microencapsulated Herbicide Rate Selection by Application Timing and Soil Texture
for RICE
Soil Texture
Broadcast Rate Per Acre1
Single Application Sequential Application
Preemergence or
Postemergence
Preemergence
Application
Postemergence
Application
Coarse (light) Soils:
(sand, loamy sand, sandy loam)2
10 to 14 fl oz/A
(0.23 to 0.33 lb ai)
8 to 12.8 fl oz/A
(0.19 to 0.30 lb. ai)
8 to 12.8 fl oz/A
(0.19 to 0.30 lb. ai)
Medium Soils:
(loam, silt, silt loam, sandy clay, sandy clay loam)
12.8 to 21 fl oz/A
(0.30 to 0.49 lb ai)
12.8 to 15 fl oz/A
(0.30 to 0.35 lb. ai)
11 to 12.8 fl oz/A
(0.26 to 0.30 lb. ai)
Fine (heavy) Soils:
(silty clay, clay loam, silty clay loam, clay)
21 to 34 fl oz/A
(0.49 to 0.80 lb. ai)
17 to 21 fl oz/A
(0.40 to 0.49 lb. ai)
12.8 to 17 fl oz/A
(0.30 to 0.40 lb. ai)
1 Within each rate range, apply lower labeled rates on coarser te xtured soils and higher rates as soil texture becomes heavier.
2 For low CEC soils (ex. soils along Crowley’s Ridge), typical preemergence use rates are 6 to 8 fl oz/A to balance crop respons e and weed control.

REPLANTING INSTRUCTIONS
If the initial planting of rice fails to produce a uniform stand, rice may be replanted in fields treated with Command 3ME Microencapsulated Herbicide.
When tank mixing with a labeled product, refer to the replant instructions for that product. When a tank mix is used, refer to each product’s label for
any additional rotational crop instructions.
PRECAUTIONS
x Caution must be taken to minimize off target drift of Command 3ME Microencapsulated Herbicide as off-site movement can cause f oliar
whitening or yellowing of sensitive plants.
x Application of Command 3ME Microencapsulated Herbicide to fields which have been precision leveled with deep cuts may result i n rice
crop injury including stand loss. Consult with rice specialists for soil amending practices which can reduce potential for herb icide injury in
precision leveled fields.
x Partial weed control may result if levees are pulled after Command 3ME Microencapsulated Herbicide has been applied.
ROTATIONAL CROP RESTRICTIONS
Rotate to crops as listed under Table 4. Rotational Crop Restrictions.
Cover crops may be planted anytime but stand reductions may occur in some areas. Refer to the ROTATIONAL CROP RESTRICTIONS tabl e
footnote for more information.
RESTRICTIONS
x Observe all Spray Drift Management and Buffer Restrictions when applying Command 3ME Microencapsulated Herbicide
x DO NOT apply Command 3ME Microencapsulated Herbicide on rice fields in which concurrent crayfish or catfish farming are included in
the cultural practices.
x DO NOT use water containing Command 3ME Microencapsulated Herbicide residues from rice cultivation to irrigate food or feed crops
which are not registered for use with Command 3ME Microencapsulated Herbicide.
x DO NOT apply more than 34.1 fl oz/A (0.8 lb ai/A) of Command 3ME Microencapsulated Herbicide per application.
x DO NOT apply more than 34.1 fl oz/A (0.8 lb ai/A) of Command 3ME Microencapsulated Herbicide per year.
x DO NOT apply more than one preemergence application prior to rice emergence.
x DO NOT retreat fields with a second preemergence application of Command 3ME Microencapsulated Herbicide.
x DO NOT apply more than one postemergence application after rice emergence up to five leaf-rice.
x DO NOT make a postemergence application with in 7 days following a preemergence application of Command 3ME Microencapsulated
Herbicide.
x DO NOT replant treated fields with any crop at intervals that are inconsistent with the ROTATIONAL CROP RESTRICTIONS on the
Command 3ME Microencapsulated Herbicide label.
x DO NOT graze or harvest for food or feed cover crops planted less than 9 months after Command 3ME Microencapsulated Herbicide
treatment.

SOYBEANS
PRODUCT INFORMATION
Command 3ME Microencapsulated Herbicide may be utilized as a soil residual herbicide for the preemergence control of labeled annual grass
and broadleaf weeds in soybeans including several herbicide resistant weed species. Command 3ME Microencapsulated Herbicide may be
tank mixed with other soybean herbicides to broaden the weed control spectrum compared to the products applied alone. To control emerged
weeds at the time of application, Command 3ME Microencapsulated Herbicide must be tank mixed with another herbicide labeled for control of
the emerged weed(s) present.

It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions
and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive di rections for use and
precautionary statements of each product in the tank mixture. Special attention must be paid to rotational cropping restrictions, potential carryover
and crop injury warnings of each product’s label when tank mixing.

12
APPLICATION TIMINGS
Preemergence: Command 3ME Microencapsulated Herbicide may be surface applied at 12.8 to 53 fl oz/A (0.3 to 1.24 lb ai/A) prior to planting and
up to 3 days after planting but prior to crop emergence.
Postemergence: Command 3ME Microencapsulated Herbicide may be applied postemergence to soybean at 12.8 to 32 fl oz/A (0.3 to 0.75 lb ai/A)
from crop emergence up to the V6 soybean growth stage.
REPLANTING INSTRUCTIONS
If initial seeding of soybean fails to produce a stand, soybean may be replanted in fields treated with Command 3ME Microencaps ulated
Herbicide alone (or with specified tank mixtures). When tank mi xing with a labeled product, refer to the soybean replant instru ctions for that
product.
ROTATIONAL CROP RESTRICTIONS
Rotate to crops as listed under Table 4. Rotational Crop Restrictions.
Cover crops may be planted anytime but stand reductions may occur in some areas. Refer to the ROTATIONAL CROP RESTRICTIONS tabl e
footnote for more information.
RESTRICTIONS
x DO NOT allow livestock to graze on treated soybean vines or feed treated vines or vine trash to livestock.
x DO NOT graze or harvest for food or feed cover crops planted less than 9 months after Command 3ME Microencapsulated Herbicide
treatment.
x DO NOT apply after V6 soybean growth stage.
x DO NOT replant treated fields with any crop at intervals which are inconsistent with the Rotational Crop Instructions on this label.
x DO NOT apply more than 53.3 fl oz/A (1.25 lb ai/A) of Command 3ME Microencapsulated Herbicide per application.
x DO NOT apply more than 53.3 fl oz/A (1.25 lb ai/A) of Command 3ME Microencapsulated Herbicide per year.
x DO NOT soil incorporate herbicide tank mixtures of Command 3ME Microencapsulated Herbicide and other herbicides .
x DO NOT apply more than 2 applications of Command 3ME Microencapsulated Herbicide per year.
x DO NOT apply after V6 soybean growth stage or within 45 days of harvest whichever is most restrictive.

SUGARCANE
PRODUCT INFORMATION
Command 3ME Microencapsulated Herbicide may be utilized as a broadcast, preemergence soil applied treatment for the control of labeled annual
grass and broadleaf weeds in sugarcane.
Command 3ME Microencapsulated Herbicide may be used at rates from 42 to 53 fl oz/A (1.0 to 1.25 lb ai/A) on newly planted or ratoon sugarcane
using ground equipment in a minimum of 10 to 40 gallons of water per acre. Command 3ME Microencapsulated Herbicide may be applied in late
summer or early fall to newly planted sugarcane and to newly planted or ratoon sugarcane as a preemergence application in spring through layby.
PREEMERGENCE BANDED APPLICATION
For preemergence banded treatments, refer to the directions for banded application in the Application Instructions section.
REPLANTING INSTRUCTIONS
If the initial planting of newly planted sugarcane fails to produce a uniform stand, sugarcane may be replanted in fields treated with Command 3ME
Microencapsulated Herbicide alone. When tank mixing with another labeled product, refer to the replant instructions for that pr oduct. Where a tank
mix is used, i t is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the a pplicable
restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most r estrictive directions for
use and precautionary statements of each product in the tank mixture.
ROTATIONAL CROP RESTRICTIONS
Rotate to crops as listed under Table 4. Rotational Crop Restrictions.
Cover crops may be planted anytime but stand reductions may occur in some areas. Refer to the ROTATIONAL CROP RESTRICTIONS tabl e
footnote for more information.
RESTRICTIONS
x DO NOT apply more than 53 fl oz/A (1.25 lb ai/A) of Command 3ME Microencapsulated Herbicide per application.
x DO NOT apply more than 53 fl oz/A (1.25 lb ai/A) of Command 3ME Microencapsulated Herbicide per year.
x DO NOT apply more than one application per year.
x DO NOT apply aerially or through irrigation equipment.
x Preharvest Interval (PHI): DO NOT apply Command 3ME Microencapsulated Herbicide within 120 days prior to harvest on sugarcane for
milling.
x DO NOT allow livestock to graze on treated sugarcane forage or trash, or feed treated sugarcane forage or trash to livestock.
x DO NOT graze or harvest for food or feed cover crops planted less than 9 months after Command 3ME Microencapsulated
Herbicide treatment.
x DO NOT replant treated fields with any crop at intervals that are inconsistent with the ROTATIONAL CROP RESTRICTIONS on the
Command 3ME Microencapsulated Herbicide label.

13
TOBACCO
PRODUCT INFORMATION
Command 3ME Microencapsulated Herbicide may be utilized as a soil applied treatment prior to weed emergence, for the control of labeled annual
grass and broadleaf weeds in tobacco.
PREEMERGENCE (Prior to Transplant)
Make a single broadcast application in a minimu m of 20 gallons of water per acre at the rate of 32 to 42 fl oz/A (0.75 to 0.98 lb ai/A). For heavy
weed pressure or heavy soil textures use the higher specified rate in the rate range, otherwise less than desirable weed control may result.
Apply immediately before, or up to 30 days prior to transplanting . Apply as a broadcast surface treatment prior to emergence of weeds. If weeds
emerge before the preemergence application can be made, cultivate prior to application. If field conditions indicate the need for additional seedbed
preparation, the use of equipment which will move the herbicide no deeper than 1 1/2 to 2” is acceptable.
PREEMERGENCE (Post Transplant)
Make a single broadcast application in a minimum of 20 gallons of water per acre at the rate of 32 to 42 fl oz/A (0.75 to 1.0 lb ai/A). For heavy weed
pressure or heavy soil textures, use the higher specified rate in the rate range, otherwise less than desirable weed control ma y result. Apply no
more than once per year using a maximum rate of 42 fl oz/A (0.98 lb ai/A). Apply over-the-top of tobacco plants immediately, or up to 7 days after,
transplanting but prior to weed emergence. If weeds emerge bef ore application can be made, cultivate prior to herbicide treatme nt to remove
existing weeds.
COMMAND 3ME MICROENCAPSULSATED HERBICIDE COMBINATIONS FOR TOBACCO
Command 3ME Microencapsulated herbicide may be tank mixed with other herbicides registered for use on tobacco to broaden the we ed control
spectrum compared to the herbicides applied alone. Command 3ME Microencapsulated Herbicide may also be tank mixed with other to bacco
herbicides, insecticides, fungicides, biologicals and/or nematic ides. When applying mixtures of Command 3ME Microencapsulated H erbicide with
other crop protection products, i t is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and
follow the applicable restrictions and limitations and directions for use on all product labels involved in the tank mixture. Users must follow the most
restrictive directions for use and precautionary statements of each product in the tank mixture. Water or liquid fertilizer may be used as a carrier for
Command 3ME Microencapsulated Herbicide when applied alone, or when tank mixed with other tobacco pesticides unless label use
directions/restrictions specifically state otherwise. Refer back to Mixing Instructions for tank mixing information.
REPLANTING INSTRUCTIONS
If initial transplanting fails to produce a uniform stand, tobacco may be replanted in a field treated with Command 3ME Microen capsulated
Herbicide alone. When tank mixing with a labeled product, refer to the replant instructions for that product. Where a tank mixture was used refer to
all product labels for any additional replant instructions.
Command 3ME Microencapsulated Herbicide APPLIED ALONE RATES AND WEEDS CONTROLLED
Refer to weeds controlled (by rate) as listed under Table 3 of this label.
TOBACCO ROTATIONAL CROP RESTRICTIONS
Rotate to crops as listed under Table 4. Rotational Crop Restrictions.
Cover crops may be planted anytime but stand reductions may occur in some areas. Refer to the ROTATIONAL CROP RESTRICTIONS table
footnote for more information.
TOBACCO RESTRICTIONS
x DO NOT apply more than one application per year.
x DO NOT apply to Tobacco Seedling Beds.
x DO NOT replant treated fields with any crop at intervals which are inconsistent with the Rotational Crop Restrictions on the
Command 3ME Microencapsulated Herbicide label.
x DO NOT apply more than 42 fl oz/A (0.98 lb ai/A) of Command 3ME Microencapsulated Herbicide per application.
x DO NOT apply more than 42 fl oz/A (0.98 lb ai/A) of Command 3ME Microencapsulated Herbicide per year.
x DO NOT graze or harvest for food or feed cover crops planted less than 9 months after Command 3ME Microencapsulated
Herbicide treatment.

14
VEGETABLE CROPS
Vegetable Crops include the following:
x Stalk and Stem Vegetable Subgroup 22A, except kohlrabi: Agave; aloe vera; asparagus; bamboo, shoots; celtuce; fennel, florence,
fresh leaves and stalk; fern, edible, fiddlehead; kale, sea; pa lm hearts; prickly pear, pads; prickly pear, Texas, pads; cultiv ars, varieties,
and hybrids of these commodities
x Beans (Dry and Succ ulent, Except Lima): Cicer arietinum (chickpea, garbanzo bean); Lupinus spp. (including sweet lupine, white
sweet lupine, white lupine, and grain lupine); Phaseolus spp. (including kidney bean, mung bean, navy bean, pinto bean, snap bean, and
waxbean); Vicia faba (broad bean, fava bean); Vigna spp. (including asparagus bean, blackeyed pea and cowpea)
x Brassica head and stem vegetable group 5-16: Broccoli, Brussels sprouts, Cabbage, Chinese Cabbage, Cauliflower, & Cultivars,
varieties, and hybrids of these commodities
x Chinese Broccoli
x Cucurbit Vegetables Crop Group 9:
- Subgroup 9A: Citron melon; muskmelon; watermelon
- Subgroup 9B: Chayote (fruit); Chinese waxgourd; cucumber; gherkin; gourd, edible; Momordica spp.; pumpkin (processing);
summer squash; winter squash
x Vegetable Soybean (Edamame)
x Kohlrabi
x Lima Beans
x Peas (Succulent)
x Peppers
x Rhubarb
x Sweet Potatoes
x Tuberous and Corm Vegetables Subgroup 1D (except potato): Arracacha; arrowroot; artichoke, Chinese; artichoke, Jerusalem;
canna, edible; cassava, bitter and sweet; chayote (root); chufa; dasheen; ginger; leren; sweet potato; tanier; turmeric; yam be an; yam,
true
PRODUCT INFORMATION
Before applying Command 3ME Microencapsulated Herbicide on vegetable crops, users, growers and/or applicators must review the
VEGETABLE, OIL CROPS AND HERBS DIRECTIONS found in the TERMS OF SALE OR USE section at the end of this label.
Command 3ME Microencapsulated Herbicide may be utilized as a soil applied treatment prior to weed emergence, for suppression or control of
labeled annual grass and broadleaf weeds in the vegetable crops listed above.
Refer to Table 7 for a list of weeds controlled or suppressed and required use rate for efficacy.
Make a single herbicide application in a minimum of 10 gallons of water per acre at the rate(s) specified in the individual crop listings hereafter.
Apply as a preemergence soil applied treatment prior to seeding or transplanting, or after seeding or transplanting but prior to crop emergence as
directed under each individual crop section. Place seed or roots of the transplants, below the chemical barrier when planting. If weeds are present
at the time of Command 3ME Microencapsulated Herbicide application, tank mix an approved postemergence herbicide labeled for cr op,
application timing and weed(s) present.
Command 3ME Microencapsulated Herbicide may be tank mixed with other herbicides registered for use on vegetables to provide a broader
spectrum of controlled weeds. When applying mixtures of Command 3ME Microencapsulated Herbicide plus other vegetable herbicides, it is the
pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and
limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and
precautionary statements of each product in the tank mixture. Water or liquid fertilizer may be used as a carrier for Command 3ME
Microencapsulated Herbicide when applied alone, or when tank mixed with other vegetable herbicides unless use directions on those labels
specifically restrict use or provide other limitations.

DIRECTIONS
Place seeds or roots of the transplants below the chemical barrier when planting.
Under drought conditions where rainfall has not sufficiently activated and moved Command 3ME Microencapsulated Herbicide through the soil profile,
certain irrigation systems may allow the crop to grow to maturity and not activate Command 3ME Microencapsulated Herbicide. Crop
symptomology may occur late in the season under heavy rainfall situations which reactivate Command 3ME Microencapsulated Herbicide that was
on the soil surface.
Certain crop varieties may have potential for injury or loss due to use of this herbicide. If unfamiliar with using Command 3ME
Microencapsulated Herbicide or tank mixtures containing Command 3ME Microencapsulated Herbicide, it is recommended to use in sm all
areas initially to confirm use rate relative to crop safety and weed control satisfaction for each cultivar planted and soil te xture before large
scale usage. Consult your agricultural experiment station or other qualified crop advisors for information pertaining to crop v arieties grown
and Command 3ME Microencapsulated Herbicide use in your area.
PRECAUTIONS: Temporary whitening and/or yellowing of the treated crop may occur.
Table 6. RATE SELECTION BY SOIL TEXTURE
Unless a specific soil texture is mentioned, application rates fo r VEGETABLE CROPS, OIL CROPS AND HERBS refer to Table 6 below for soil
texture groups: coarse, medium and fine. Table 6 includes a complete listing of soil textures included in each of the soil texture groupings.
Course Medium Fine
Sand, Loamy sand and
Sandy loam
Loam, Silt loam, Sandy clay
loam and Silt
Sandy clay, Silty clay loam,
Silty clay, Clay loam and Clay
*Select lower to higher rates within the range noted in the individual vegetable crop listings based on lighter to heavier soil types within a
textural group.

15
TABLE 7. WEEDS CONTROLLED BY COMMAND 3ME MICROENCAPSULATED HERBICIDE APPLIED ALONE 1
AT VEGETABLE, OIL CROPS AND HERBS USE RATES.
6 to 16 fl oz/A
(0.14 to 0.38 lb ai/A)
17 to 21 fl oz/A
(0.40 to 0.49 lb ai/A)
22 to 43 fl oz/A
(0.52 to 1.0 lb ai/A)
44 to 64 fl oz/A
(1.03 to 1.5 lb ai/A)
Grasses
Barnyardgrass
Bluegrass, Annual
Broadleaf Signalgrass
Crabgrass
 - Large
 - Smooth
Foxtail
 - Giant
 - Green
 - Robust
Goosegrass
Panicum
 - Common
 - Fall
 - Texas

Broadleaves
Anoda, Spurred2
Galinsoga spp.
Henbit
Sida, Prickly (teaweed)*
Shepherd’s-purse
Velvetleaf
2

Grasses
All grasses controlled at
6 to 16 fl oz/A plus:

Johnsongrass (seedling)
Ryegrass, Italian
Sandbur, Field*

Broadleaves
All broadleaves controlled at
6 to 16 fl oz/A plus:
Dock, Curly
Jimsonweed*
Ladysthumb
Lambsquarters, Common*
Mallow, Venice
Nightshade, Hairy*
Pineappleweed*
Ragweed, Common*
Sida, Prickly (teaweed)
Redweed
Vetch, Hairy*
Grasses
All grasses controlled at
17 to 21 fl oz/A plus:

Bermudagrass*
Cupgrass
 - Southwestern
 - Woolly
Foxtail
 - Yellow

Broadleaves
All broadleaves controlled at
17 to 21 fl oz/A plus:
Beggarweed, Florida
Croton, Tropic
Dayflower, Spreading
Dogbane, Hemp (seedling)* 3
Kochia*
Jimsonweed
Lambsquarters, Common
Pigweed
 - Redroot*
 - Smooth*
Pineappleweed*
Plantain, Blackseed
Poinsettia, Wild
3
Pokeweed, Common*4
Purslane
Pusley, Florida
Smartweed*, Pennsylvania

Sweetclover, Yellow
Thistle, Canada4
Vetch, Hairy
Grasses
All grasses controlled at
22 to 43 fl oz/A plus:
Junglerice*
Millet, Wild Proso*

Broadleaves
All broadleaves controlled at
22 to 43 fl oz/A plus:
Balloonvine*
Cocklebur, Common*
Jointvetch*
Kochia
Morningglory
 - Palmleaf
 - Pitted
Nightshade,
 - Black*
 - Hairy
Parthenium, Ragweed
(seedling)
Ragweed, Common
Spurge, Prostrate

* Suppression/Partial Control
1
Weed control with Command 3ME Microencapsulated Herbicide can vary and is highly influenced by a combination of soil texture, C EC, soil moisture and
application rate. Experience from previous use is important for determining product use rate selection to ensure optimum weed c ontrol and avoid excessive
crop chlorosis or bleaching. Use higher label rates based on soil texture criteria for fields with a history of heavy weed pres sure and for extended residual weed
control. For target weed species in fields that have previously been in conservation programs or where heavy weed pressure is a nticipated and/or based on
previous use history and performance. For fields that have previously been in conservation programs, use a minimum application rate of 53 fl oz/A for cocklebur
or common ragweed control.
2
For heavy weed pressure or heavy soil textures, use 27 fl oz/A to control velvetleaf or spurred anoda.
3
Use In AR/LA/MS/TX/OK only—for high pressure and heavy soils use 53 fl oz/A.
4 At minimum 32 fl oz/A use rate.

16
Table 8. VEGETABLE, OIL CROPS AND HERBS ROTATIONAL CROP RESTRICTIONS
Rotate to crops as listed below. 1
NOTE: When using Command 3ME Microencapsulated Herbicide with other herbicides registered for vegetables always refer to rotational
restrictions and precautions on the other product’s label and follow the most restrictive requirements.
6 to 11 fl oz/A
(0.14 to 0.26 lb ai/A)
12 to 16 fl oz/A
(0.28 to 0.38 lb ai/A)
17 to 21 fl oz/A
(0.40 to 0.49 lb ai/A)
22 to 32 fl oz/A
(0.52 to 0.75 lb ai/A)
33 to 53 fl oz/A
(0.77 to 1.24 lb ai/A)
54 to 64 fl oz/A
(1.26 to 1.5 lb ai/A)
ANYTIME ANYTIME ANYTIME ANYTIME ANYTIME ANYTIME
Beans, Snap
(succulent)
Cabbage (all)
Cotton*
Cucurbits
Peas
Peppers
Potatoes, Sweet
Rice
Soybeans
Tobacco
Tuberous & Corm
 Vegetables

Cabbage
(transplant)
Cotton*
Cucurbits
Peas
Peppers
Potatoes, Sweet
Rice
Soybeans
Tobacco
Tuberous &Corm
 Vegetables
Cabbage
(transplant)
Cotton*
Peas
Peppers
Potatoes, Sweet
Rice
Soybeans
Tobacco
Tuberous &Corm
 Vegetables
Cotton*
Peppers
Potatoes, Sweet
Rice
Soybeans
Squash(winter)
Tobacco
Tuberous &Corm
 Vegetables
Cotton*
Peppers (up to 42.7
fl oz.)
Potatoes, Sweet
Soybeans
Tobacco
Tuberous &Corm
 Vegetables
Potatoes, Sweet

2 MONTHS
Lima Beans2
9 MONTHS 9 MONTHS 9 MONTHS 9 MONTHS 9 MONTHS 9 MONTHS
All crops listed
above plus:
Beans, Dry
Beet, Sugar
Corn
- Field
- Pop
- Seed
- Sweet
Cotton
Peanuts
Potato
Sorghum
Tomatoes
(Transplant)

All crops listed
above plus:
Beans, Dry
Beans (succulent)
Beet, Sugar
Cabbage (direct
seeded)
Corn
- Field
- Pop
- Seed
- Sweet
Cotton
Peanuts
Potato
Sorghum
Tomatoes
(Transplant)

All crops listed
above plus:
Beans, Dry
Beans (succulent)
Beet, Sugar
Cabbage (direct
seeded)
Corn
- Field
- Pop
- Seed
- Sweet
Cotton
Cucurbits
Peanuts
Potato
Sorghum
Tomatoes
(Transplant)

All crops listed
above plus:
Beans, Dry
Beans (succulent)
Beet, Sugar
Cabbage (direct
seeded and
transplant)
Corn
- Field
- Pop
- Seed
- Sweet
Cotton
Cucurbits
Peanuts
Peas
Potato
Rice
Sorghum
Tomatoes
(Transplant)

All crops listed
above plus:

Beans, Dry
Beans (succulent)
Beet, Sugar
Cabbage (direct
seeded and
transplant)
Cotton
Cucurbits
Peanuts
Peas
Potato
Rice
Sorghum
Tomatoes
(Transplant)

All crops listed
above plus:
Beans, Dry
Beans (succulent)
Beet, Sugar
Cabbage (direct
seeded and
transplant)
Cotton
Cucurbits
Peanuts
Peas
Peppers
Potato
Rice
Sorghum
Soybeans
Tobacco
Tomatoes
(Transplant)
Tuberous
& Corm
Vegetables
12 MONTHS 12 MONTHS 12 MONTHS 12 MONTHS 12 MONTHS 12 MONTHS
All crops listed
above plus:
Tomatoes
(direct seeded)
Wheat

All crops listed
above plus:
Tomatoes
(direct seeded)
Wheat

All crops listed
above plus:
Tomatoes
(direct seeded)
Wheat

All crops listed
above plus:
Tomatoes
(direct seeded)
Wheat

All crops listed
above plus:
Corn
- Field
- Pop
- Seed
- Sweet
Tomatoes
(direct seeded)
Wheat
All crops listed
above plus:
Corn
- Field
- Pop
- Seed
- Sweet
Tomatoes
(direct seeded)

16 MONTHS 16 MONTHS 16 MONTHS 16 MONTHS 16 MONTHS 16 MONTHS
All crops not listed All crops not listed All crops not listed All crops not listed All crops not listed All crops not listed
1 Cover crops may be planted anytime, however be advised stand redu ctions may occur. It is advisable to increase seeding rate 20 -25% if carryover potential is
suspected as outlined under ROTATIONAL CROPPING PRECAUTIONS below. DO NOT graze or harvest for food or feed cover crops planted less than 9 months
after Command 3ME Microencapsulated Herbicide treatment. DO NOT allow livestock to graze on treated vines or feed treated vines or vine trash to livestock.
2 Plant back interval to lima bean is 60 days when 12 or less fl oz/A of Command 3ME Microencapsulated Herbicide is applied.
* Refer to the “Requirements for Planting Time Applications” and “Replanting Instructions” in the Cotton Directions for Use sec tion.

17
VEGETABLE REPLANTING INSTRUCTIONS
If initial seeding or transplants fail to produce the desired st and, vegetables may be replanted in a field treated with Comman d 3ME
Microencapsulated Herbicide alone. Where a tank mixture is used, refer to the product(s) labels for any additional replant instructions.
RESTRICTIONS
x DO NOT retreat field with a second application of Command 3ME Microencapsulated Herbicide.
x DO NOT replant treated fields with any crop at intervals which are inconsistent with the Table 8: VEGETABLE, OIL CROPS AND HERBS
ROTATIONAL CROP RESTRICTIONS on this Command 3ME Microencapsulated Herbicide label.
STALK AND STEM VEGETABLE SUBGROUP 22A, EXCEPT KOHLRABI INCLUDES:
(agave; aloe vera; asparagus; bamboo, shoots; celtuce; fennel, Florence, fresh leaves and stalk; fern, edible,
fiddlehead; kale, sea; palm hearts; prickly pear, pads; prickly pear, Texas, pads; cultivars, varieties, and hybrids of
these commodities)
Command 3ME Microencapsulated Herbicide may be applied as a soil applied treatment prior to weed emergence for suppression or c ontrol of
labeled annual grass and broadleaf weeds in the stalk and stem vegetable subgroup 22A listed above.
For a list of weeds controlled, refer to Table 7 of the Vegetable Crops section above.
Apply 42 fl oz/A (0.98 lb ai/A) of Command 3ME Microencapsulated Herbicide in a minimum of 10 gallons of water per treated acre as a broadcast
application to the soil prior to spear emergence. If spears have emerged, make an application after a clean harvest. Cover exposed plants with soil
prior to application.
NOTE: Prior to use, refer to Vegetable, Oil Crops and Herbs Directions under TERMS OF SALE OR USE at the end of this label.
RESTRICTIONS
x DO NOT apply more than 42 fl oz/A (0.98 lb ai/A) of Command 3ME Microencapsulated Herbicide per application.
x DO NOT apply more than 42 fl oz/A (0.98 lb ai/A) of Command 3ME Microencapsulated Herbicide per year.
x DO NOT make more than one application per year.
x Preharvest Interval (PHI): DO NOT apply within 14 days of harvest.

BEANS (DRY AND SUCCULENT, EXCEPT LIMA):
Cicer arietinum (chickpea, garbanzo bean); Lupinus spp. (including sweet lupine, white sweet lupine, white lupine, and
grain lupine); Phaseolus spp. (including kidney bean, mung bean, navy bean, pinto bean, snap bean, and waxbean);
Vicia faba (broad bean, fava bean); Vigna spp. (including asparagus bean, blackeyed pea and cowpea)
For the control or suppression of labeled annual grasses and broadleaf weeds in beans, apply broadcast at 6 to 10 fl oz/A (0.14 to 0.23 lb ai/A) after
seeding and prior to emergence. Use the lower specified rate on coarse texture soils and the higher specified rate on fine texture soils. Refer to the
soil texture chart found above.
For a list of weeds controlled, refer to Table 7 of the Vegetable Crops section above.
NOTE: Prior to use, refer to Vegetable, Oil Crops and Herbs Directions under TERMS OF SALE OR USE at the end of this label.
RESTRICTIONS
x DO NOT apply more than 10 fl oz/A (0.23 lb ai/A) of Command 3ME Microencapsulated Herbicide per application.
x DO NOT apply more than 10 fl oz/A (0.23 lb ai/A) of Command 3ME Microencapsulated Herbicide per year.
x DO NOT make more than one application to beans (dry and succulent, except lima) per year.
x Preharvest Interval (PHI): DO NOT apply within 45 days of harvest for beans.

BRASSICA (HEAD AND STEM VEGETABLE GROUP 5-16):
Broccoli (Transplanted); Brussels sprouts; Cabbage; Chinese Cabbage (napa); Cauliflower; cultivars, varieties, and
hybrids of these commodities
For the control or suppression of labeled annual grass and broadleaf weeds in head and stem brassica.
For a list of weeds controlled, refer to Table 7 of the Vegetable Crops section above.
Direct Seeded Cabbage - apply broadcast at 10 fl oz/A (0.23 lb ai/A) after planting prior to emergence.
Transplant Cabbage - apply broadcast at 10 to 21 fl oz/A (0.23 to 0.49 lb ai/A) prior to transplanting. Use the lower specified rate on coarse soils
and the higher specified rate on fine soils. Refer to the soil texture chart found above.
Transplant Broccoli – apply broadcast at 10 fl oz/A (0.23 lb ai/A) within 48 hours of transplanting broccoli.
All Transplanted Brassica other than Cabbage and Broccoli – Apply broadcast at 10 fl oz/A (0.23 lb ai/A) within 72 hours of transplanting.
NOTE: Prior to use, refer to Vegetable, Oil Crops and Herbs Directions under TERMS OF SALE OR USE at the end of this label.

18
RESTRICTIONS
x DO NOT make more than one application to brassica (head and stem vegetable group 5-16) per year.
x Preharvest Interval (PHI): DO NOT apply within 45 days of harvest for cabbage.
x Direct seeded cabbage and transplant broccoli:
- DO NOT apply more than 10 fl oz/A (0.23 lb ai/A) of Command 3ME Microencapsulated Herbicide per application for direct
seeded cabbage and transplant broccoli.
- DO NOT apply more than 10 fl oz/A (0.23 lb ai/A) of Command 3ME Microencapsulated Herbicide per year for direct seeded
cabbage and transplant broccoli.
- Transplant cabbage:
- DO NOT apply more than 21 fl oz/A (0.49 lb ai/A) of Command 3ME Microencapsulated Herbicide per application for transplant
cabbage.
- DO NOT apply more than 21 fl oz/A (0.49 lb ai/A) of Command 3ME Microencapsulated Herbicide per year for transplant
cabbage.
x All transplanted brassica other than cabbage or broccoli:
- DO NOT apply more than 10 fl oz/A (0.23lb ai/A) of Command 3ME Microencapsulated Herbicide per application.
- DO NOT apply more than 10 fl oz/A (0.23 lb ai/A) of Command 3ME Microencapsulated Herbicide per year.

CHINESE BROCCOLI (GAI LAN)
For the control or suppression of labeled annual grass and broadleaf weeds in Chinese broccoli, broadcast apply 10 fl oz/A (0.23 lb. ai) Command
3ME Microencapsulated Herbicide within 48 hours of transplanting and prior to weed emergence.
For a list of weeds controlled, refer to Table 7 of the Vegetable Crops section above.
Transplant Chinese Broccoli – apply broadcast at 10 fl oz/A (0.23 lb ai/A) within 48 hours of transplanting Chinese broccoli.
NOTE: Prior to use, refer to Vegetable, Oil Crops and Herbs Directions under TERMS OF SALE OR USE at the end of this label.
RESTRICTIONS
x DO NOT apply more than 10 fl oz/A (0.23 lb ai/A) of Command 3ME Microencapsulated Herbicide per application.
x DO NOT apply more than 10 fl oz/A (0.23 lb ai/A) of Command 3ME Microencapsulated Herbicide per year.
x DO NOT make more than one application to Chinese broccoli per year.
x Preharvest Interval (PHI): DO NOT apply within 45 days of harvest of Chinese broccoli.

CUCURBIT VEGETABLES CROP GROUP 9:
CUCUMBER, MUSKMELON AND SUMMER SQUASH
Chayote (fruit); Chinese waxgourd (Chinese preserving melon); citron melon; cucumber, gherkin; gourd, edible
(includes hyotan, cucuzza, hechima, Chinese okra); Momordica spp. (includes balsam apple, balsam, pear, bittermelon,
Chinese cucumber); muskmelon (includes true cantaloupe, cantaloupe, casaba, crenshaw melon, golden pershaw
melon, honeydew melon, honey balls, mango melon, Persian melon, pineapple melon, Santa Claus melon, snake
melon); pumpkin; squash, summer (includes crookneck squash, scallop squash, straightneck squash, vegetable
marrow, zucchini); squash, winter (includes butternut squash, calabaza, hubbard squash, acorn squash, spaghetti
squash); watermelon

Melon Subgroup 9A Use Directions: Citron melon, muskmelon including hybrids and/or varieties of Cucumis melo
(includes true cantaloupe, cantaloupe, casaba, Santa Claus melon, crenshaw melon, honeydew melon, honey balls,
Persian melon, golden pershaw melon, mango melon, pi neapple melon, snake melon) and watermelon including
hybrids and/or varieties of (Citrullus spp.)
For the control or suppression of labeled annual grass and broad leaf weeds in melon subgroup 9A, apply broadcast at 6 to 10 fl oz/A (0.14 to 0.23
lb ai/A). Use the lower specified rate on coarse texture soils and the higher specified rate on fine texture soils. Refer to the soil texture chart found
above.
For a list of weeds controlled, refer to Table 7 of the Vegetable Crops section above.
For direct seeded melons: Make one broadcast application after seeding but prior to melon emergence.
For transplanted melons: Make one broadcast application before transplanting and ensure to place the roots of the transplant below the chemical
barrier when planting.
NOTE: Prior to use, refer to Vegetable, Oil Crops and Herbs Directions under TERMS OF SALE OR USE at the end of this label.
RESTRICTIONS
x DO NOT apply more than 10 fl oz/A (0.23 lb ai/A) of Command 3ME Microencapsulated Herbicide per application.
x DO NOT apply more than 10 fl oz/A (0.23 lb ai/A) of Command 3ME Microencapsulated Herbicide per year.
x DO NOT make more than one application to melons per year.

Squash/Cucumber Subgroup 9B: Chayote (Fruit); Chinese Waxgourd; Cucumber; Gherkin; Gourd, Edible;
Momordica spp.; Pumpkin; Summer Squash; Winter Squash

19
CUCUMBER USE DIRECTIONS
For the control or suppression of labeled annual grass and broadleaf weeds in cucumber, apply broadcast at 6 to 16 fl oz/A (0.1 4 to 0.38 lb ai/A) in
a minimum spray volume of 10 gallons of water per treated acre. Use the lower specified rate on coarse texture soils and the hi gher specified rate
on fine texture soils. Refer to the soil texture chart found above.
For a list of weeds controlled, refer to Table 7 of the Vegetable Crops section above.
For direct seeded cucumber: Make one broadcast application after seeding but prior to cucumber emergence.
For transplanted cucumber: Make one broadcast application before transplanting and en sure transplant root placement below the chemical
barrier when planting.
NOTE: Prior to use, refer to Vegetable, Oil Crops and Herbs Directions under TERMS OF SALE OR USE at the end of this label.
RESTRICTIONS
x DO NOT apply more than 16 fl oz/A (0.38 lb ai/A) of Command 3ME Microencapsulated Herbicide per application.
x DO NOT apply more than 16 fl oz/An (0.38 lb ai/A) of Command 3ME Microencapsulated Herbicide per year.
x DO NOT make more than one application to cucumber per year.
x Preharvest Interval (PHI): DO NOT apply within 30 days of cucumber harvests.

SUMMER SQUASH USE DIRECTIONS
(Cucurbita pepo var. melopepo) (includes crookneck squash, scallop squash, straightneck squash, vegetable marrow, zucchini).
For the control or suppression of labeled annual grass and broadleaf weeds in summer squash.
For a list of weeds controlled, refer to Table 7 of the Vegetable Crops section above.
For summer squash, apply broadcast, prior to seeding or transplanting, at 8 to 16 fl oz/A (0.19 to 0.38 lb ai/A). Use the lower specified rate on
coarse soils and the higher specified rate on fine soils. Refer to the soil texture chart found above.
OR
Apply as a pre-emergent (to weeds) soil surface treatment before, or just prior to transplanting, to row middles between plasti c covered beds. Use
rates as noted above.
NOTE: Prior to use, refer to Vegetable, Oil Crops and Herbs Directions under TERMS OF SALE OR USE at the end of this label.
RESTRICTIONS
x DO NOT make more than one application to squash per year.
x DO NOT apply to soil that will be covered with plastic mulch.
x DO NOT apply more than 16 fl oz/A (0.38 lb ai/A) of Command 3ME Microencapsulated Herbicide per application for summer squash.
x DO NOT apply more than 16 fl oz/A (0.38 lb ai/A) of Command 3ME Microencapsulated Herbicide per year for summer squash.
x Preharvest Interval (PHI): DO NOT apply within 30 days of harvesting summer squash.

WINTER SQUASH and PROCESSING PUMPKIN USE DIRECTIONS
(Cucurbita maxima; C. moschata ) (includes butternut squash, calabaza, Hubbard squash); ( C. mixta; C. pepo ) (includes acorn squash, spaghetti
squash).
For the control or suppression of labeled annual grass and broadleaf weeds in winter squash and processing pumpkin.
For a list of weeds controlled, refer to Table 7 of the Vegetable Crops section above.
For winter squash and processing pumpkin, apply broadcast, prior to seeding or transplanting, at 10 to 32 fl oz/A (0.23 to 0.75 lb ai/A). Use the
lower specified rate on coarse texture soils and the higher specified rate on fine texture soils. Refer to the soil texture chart found above.
OR
Apply a preemergence (prior to weed emergence) broadcast to the so il surface before, or just prior to transplanting, to row middles between plastic
covered beds. Use rates as noted above.
NOTE: Prior to use, refer to Vegetable, Oil Crops and Herbs Directions under TERMS OF SALE OR USE at the end of this label.
RESTRICTIONS
x DO NOT make more than one application to squash or processing pumpkin per year.
x DO NOT apply to soil that will be covered with plastic mulch.
x DO NOT use on the following cultivars or varieties as unacceptable whitening of the fruit may occur: NK530, NK580, Turks Turban, Golden
Delicious, all Banana types, and all other Cucurbita maxima types that have a pink or burnt orange coloration at harvest.
x DO NOT use on Jack-o-lantern pumpkins.
x DO NOT apply more than 32 fl oz/A (0.75 lb ai/A) of Command 3ME Mi croencapsulated Herbicide per application for winter squash and
processing pumpkins.
x DO NOT apply more than 32 fl oz/A (0.75 lb ai/A) of Command 3ME Microencapsulated Herbicide per year for winter squash and
processing pumpkins.
x Preharvest Interval (PHI): DO NOT apply within 45 days of harvesting winter squash and processing pumpkins.

EDAMAME (VEGETABLE SOYBEAN)
Command 3ME Microencapsulated Herbicide may be applied as a soil applied treatment prior to weed emergence and after seeding fo r
suppression or control of labeled annual gr ass and broadleaf weeds in edamame. Apply 21 fl oz/A (0.49 lb ai/A) of Command 3ME
Microencapsulated Herbicide in a minimum of 10 gallons of water pe r treated acre as a broadcast application to the soil prior t o weed emergence
and after seeding.
For a list of weeds controlled, refer to Table 7 of the Vegetable Crops section above.
NOTE: Prior to use, refer to Vegetable, Oil Crops and Herbs Directions under TERMS OF SALE OR USE at the end of this label.

20
RESTRICTIONS
x DO NOT apply more than 21 fl oz/A (0.49 lb ai/A) of Command 3ME Microencapsulated Herbicide per application.
x DO NOT apply more than 21 fl oz/A (0.49 lb ai/A) of Command 3ME Microencapsulated Herbicide per year.
x DO NOT make more than one application to edamame per year.
x Preharvest Interval (PHI): DO NOT apply within 14 days of harvest.

KOHLRABI
For the control or suppression of labeled annual grass and broadl eaf weeds in kohlrabi, apply Command 3ME Microencapsulated Her bicide
broadcast as described below.
For a list of weeds controlled, refer to Table 7 of the Vegetable Crops section above.
Direct seeded kohlrabi - apply broadcast at 10 fl oz/A (0.23 lb ai/A) after seeding but prior to emergence.
Transplant kohlrabi - apply broadcast at 10 to 21 fl oz/A (0.25 to 0.49 lb ai/A) prior to transplanting Use the lower specified rate on coarse textur e
soils and the higher specified rate on fine texture soils. Refer to the soil texture chart found above.
NOTE: Prior to use, refer to Vegetable, Oil Crops and Herbs Directions under TERMS OF SALE OR USE at the end of this label.
RESTRICTIONS
x Direct seeded kohlrabi:
- DO NOT apply more than 10 fl oz/A (0.23 lb ai/A) of Command 3M E Microencapsulated Herbicide per application for direct
seeded kohlrabi.
- DO NOT apply more than 10 fl oz/A (0.23 lb ai/A) of Command 3M E Microencapsulated Herbicide per year for direct seeded
kohlrabi.
x Transplant kohlrabi:
- DO NOT apply more than 21 fl oz/A (0.49 lb ai/A) of Command 3ME Microencapsulated Herbicide per application for transplant
kohlrabi.
- DO NOT apply more than 21 fl oz/A (0.49 lb ai/A) of Command 3ME Microencapsulated Herbicide per year for transplant
kohlrabi.
- DO NOT make more than one application to kohlrabi per year.
- Preharvest Interval (PHI): DO NOT apply within 45 days of harvest for kohlrabi.

LIMA BEANS
For Use Only in the States of DE, MD and VA
For the suppression of labeled annual grass and broadleaf weeds in lima beans, apply Command 3ME Microencapsulated Herbicide broadcast at 4
to 6 fl oz/A (0.09 to 0.14 lb ai/A) as a soil applied treatment prior to weed emergence and after seeding. This use direction is only for suppression of
early season grass and certain broadleaf weeds to provide additional time for follow up cultivation and application of other labeled post emergence
herbicides.
For a list of weeds controlled, refer to Table 7 of the Vegetable Crops section above.
NOTE: Prior to use, refer to Vegetable, Oil Crops and Herbs Directions under TERMS OF SALE OR USE at the end of this label.
Replanting Instructions
If the initial seeding fails to produce the desired stand, lima be an may be replanted in a field treated with Command 3ME Micro encapsulated
Herbicide alone. DO NOT retreat field with a second application of Command 3ME Microencapsulated Herbicide.
When tank mixing with one or more registered products, refer to the replant instructions and restrictions for each respective product.
Recropping Rotation Interval to Lima Bean Following Command 3ME Microencapsulated Herbicide Use in Prior
Crop
Lima bean may be replanted as early as, but not before 60 days following 12 fl oz/A (0.28 lb ai/A) or less Command 3ME Microencapsulated Herbicide
use rate in the prior crop.
For use rates exceeding 16 fl oz/A (0.38 lb ai/A), refer to the Rotational Crop Restrictions on this Command 3ME Microencapsulated Herbicide label.
RESTRICTIONS
x DO NOT apply more than 6 fl oz/A (0.14 lbai/A) of Command 3ME Microencapsulated Herbicide per application.
x DO NOT apply more than 10 fl oz/A (0.23 lb ai/A) of Command 3ME Microencapsulated Herbicide per year.
x DO NOT make more than one application to lima beans per crop.
x DO NOT replant treated fields with any crop at intervals which are inconsistent with the Rotational Crop Restrictions on the Command
3ME Microencapsulated Herbicide label.
x Preharvest Interval (PHI): DO NOT apply within 20 days of harvest.

PEAS (SUCCULENT)
Pea (Pisum spp.) (includes dwarf pea, edible-pod pea, English pea, garden pea, green pea, snow pea, sugar snap
pea); and pigeon pea.
For the control or suppression of labeled annual grass and broadleaf weeds in succulent pea, apply broadcast at 21 fl oz/A (0.49 lb ai/A) after seeding
and prior to weed emergence.
For a list of weeds controlled, refer to Table 7 of the Vegetable Crops section above.
NOTE: Prior to use, refer to Vegetable, Oil Crops and Herbs Directions under TERMS OF SALE OR USE at the end of this label.

21
RESTRICTIONS
x DO NOT apply more than 21 fl oz/A (0.49 lb ai/A) of Command 3ME Microencapsulated Herbicide per application.
x DO NOT apply more than 21 fl oz/A (0.49 lb ai/A) of Command 3ME Microencapsulated Herbicide per year.
x DO NOT make more than one application to succulent peas per year.
x Preharvest Interval (PHI): DO NOT apply within 20 days of harvest.

PEPPERS, BANANA
For Use Only in the States of IN, MI and OH
For control or suppression of labeled weeds in banana pepper in listed states only via ground application. Make a single broadcast herbicide
application at 10.7 to 42 fl oz/A (0.25 to 0.98 lb ai/A) in a minimum of 10 gallons of water per acre. See Table 9 for specific rates dependent upon soil
texture. When applying Command 3ME Microencapsulated Herbicide as a pre-transplant soil treatment, place roots of transplants below the herbicide
barrier when transplanting. Additional use of labeled postemergence herbicide applications may be required where grass weeds are present at the
time of application.
For a list of weeds controlled, refer to Table 7 of the Vegetable Crops section above.
NOTE: Prior to use, refer to Vegetable, Oil Crops and Herbs Directions under TERMS OF SALE OR USE at the end of this label.
Table 9. Command 3ME Microencapsulated Herbicide Rate Selection by Application Timing and Soil Texture
for Banana Peppers
Soil Texture Broadcast Rates
Coarse (light) Soils:
(sand, loamy sand, sandy loam)2
10.7 to 21.3 fl oz/A
(0.25 to 0.50 lb ai)
Medium Soils:
(loam, silt, silt loam, sandy clay, sandy clay loam)
21.3 to 32 fl oz/A
(0.50 to 0.75 lb ai)
Fine (heavy) Soils:
(silty clay, clay loam, silty clay loam, clay)
32 to 42.7 fl oz/A
(0.75 to 1 lb. ai)
RESTRICTIONS
x Avoid making applications of Command 3 ME Microencapsulated Herbic ide when spray particles may be carried by air currents to areas
where sensitive crops and plants are growing, or when temperature inversions exist.
x DO NOT apply more than one application per year.
x DO NOT apply more than 42 fl oz/A (0.98 lb ai/A) of Command 3ME Microencapsulated Herbicide per application.
x DO NOT apply more than a total of 42 fl oz/A (0.98 fl oz/A) of Command 3ME Microencapsulated Herbicide per year.
x Preharvest Interval (PHI): DO NOT apply within 20 days of harvest.

PEPPERS (Bell and Non-Bell)
For the control or suppression of labeled annual grass and broadleaf weeds in bell peppers and non-bell peppers, apply broadcast at 10 to 42 fl
oz/A (0.23 to 0.98 lb ai/A). Use the lower specified rate on coarse texture soils and the higher specified rate on fine texture soils. Refer to the soil
texture chart found above.
For a list of weeds controlled, refer to Table 7 of the Vegetable Crops section above.
NOTE: Prior to use, refer to Vegetable, Oil Crops and Herbs Directions under TERMS OF SALE OR USE at the end of this label.
RESTRICTIONS
• DO NOT use on banana peppers except in AL, MI, and OH.
• DO NOT apply more than 42 fl oz/A (0.98 lb ai/A) of Command 3ME Microencapsulated Herbicide per application.
• DO NOT apply more than 42 fl oz/A (0.98 lb ai/A) of Command 3ME Microencapsulated Herbicide per year.
• DO NOT make more than one application to peppers per year.
• Preharvest Interval (PHI): DO NOT apply within 20 days of harvest.

RHUBARB
For the control or suppression of labeled annual grass and broadleaf weeds in rhubarb. Apply broadcast at 64 fl oz/A (1.5 lb ai /A) to dormant
rhubarb prior to leaf emergence.
For a list of weeds controlled, refer to Table 7 of the Vegetable Crops section above.
NOTE: Prior to use, refer to Vegetable, Oil Crops and Herbs Directions under TERMS OF SALE OR USE at the end of this label.
RESTRICTIONS
x DO NOT apply more than 64 fl oz/A (1.5 lb ai/A) of Command 3ME Microencapsulated Herbicide per application.
x DO NOT apply more than 64 fl oz/A (1.50 lb ai/A) of Command 3ME Microencapsulated Herbicide per year.
x DO NOT make more than one application to rhubarb per year.
x Preharvest Interval (PHI): DO NOT apply within 20 days of harvest.

SNAP BEAN
For the control or suppression of labeled annual grass and broadleaf weeds in snap bean, apply broadcast at 6 to 10 fl oz/A (0. 14 to 0.23 lb ai/A) after
seeding and prior to emergence. Use the lower specified rate on coarse texture soils and the higher specified rate on fine text ure soils. Refer to the
soil texture chart found above.
For a list of weeds controlled, refer to Table 7 of the Vegetable Crops section above.
NOTE: Prior to use, refer to Vegetable, Oil Crops and Herbs Directions under TERMS OF SALE OR USE at the end of this label.

22
RESTRICTIONS
x DO NOT apply more than 10 fl oz/A (0.23 lb ai/A) Command 3ME Microencapsulated Herbicide per application.
x DO NOT apply more than 10 fl oz/A (0.23 lb ai/A) Command 3ME Microencapsulated Herbicide per year.
x DO NOT make more than one application to beans (dry and succulent, except lima) per year.
x Preharvest interval (PHI): DO NOT apply within 45 days of harvest for beans.

SWEET POTATO
For the control of labeled annual grass and broadleaf weeds in sweet potato, apply broadcast at 21 to 64 fl oz/A (0.49 to 1.5 lb ai/A). Use the lower
specified rate on coarse texture soils and the higher specified rate on fine texture soils. Refer to the soil texture chart found above.
OR
Apply as a single application post transplant to the crop and prior to weed emergence at a maximum of 64 fl oz/A (1.5 lb ai/A).
For a list of weeds controlled, refer to Table 7 of the Vegetable Crops section above.
NOTE: Prior to use, refer to Vegetable, Oil Crops and Herbs Directions under TERMS OF SALE OR USE at the end of this label.
RESTRICTIONS
x DO NOT apply more than 64 fl oz/A (1.5 lb ai/A) of Command 3ME Microencapsulated Herbicide per application.
x DO NOT apply more than 64 fl oz/A (1.5 lb ai/A) of Command 3ME Microencapsulated Herbicide per year.
x DO NOT make more than one application to sweet potato per year.
x Preharvest Interval (PHI): DO NOT apply within 95 days of harvest when applying less t han 53 fl oz/A (1.25 lb ai/A) or 125 days when
more than 53 fl oz/A (1.25 lb ai/A) was applied.

TUBEROUS AND CORM VEGETABLES CROP SUBGROUP 1D (EXCEPT POTATO)
Arracacha; arrowroot; artichoke, Chinese; artichoke, Jerusalem; canna, edible; cassava, bitter and sweet; chayote
(root); chufa; dasheen; ginger; leren; sweet potato; tanier; turmeric; yam bean; yam, true (FOR SWEET POTATO
REFER TO DIRECTIONS ABOVE)
For the control of labeled annual grass and broadleaf weeds in arracacha, cassava, tanier and yams, apply broadcast at 32 to 53 fl oz/A (0.75 to
1.24 lb ai/A). Use the lower specified rate on coarse texture soils and the higher specified rate on fine texture soils. Refer to the soil texture chart
found above.
For a list of weeds controlled, refer to Table 7 of the Vegetable Crops section above.

NOTE: Prior to use, refer to Vegetable, Oil Crops and Herbs Directions under TERMS OF SALE OR USE at the end of this label.
RESTRICTIONS
x DO NOT apply more than 53 fl oz/A (1.25 lb ai/A) of Command 3ME Microencapsulated Herbicide per application.
x DO NOT apply more than 53 fl oz/A (1.25 lb ai/A) Command 3ME Microencapsulated Herbicide per year.
x DO NOT make more than one application to tuberous and corm vegetables per year.
x Preharvest Interval (PHI): DO NOT apply within 125 days of harvest.

OIL CROPS
Command 3ME Microencapsulated Herbicide may be used in the labeled oil crops below to control or suppress labeled grass and
broadleaves listed in Table 7 of the Vegetable Crops section above. Rotate to crops as listed in Table

PEPPERMINT and SPEARMINT TOPS
Command 3ME Microencapsulated Herbicide may be utilized as a pr eemergence treatment for the c ontrol of labeled annual grass and broadleaf
weeds in peppermint and spearmint. Command 3ME Microencapsulated Herbicide may be applied at the rate of 21 fl oz/A (0.49 lb ai /A) to the soil
surface prior to the emergence of weeds and the initiation of new growth of peppermint and spearmint plants.
For a list of weeds controlled, refer to Table 7 of the Vegetable Crops section above.
NOTE: Prior to use, refer to Vegetable, Oil Crops and Herbs Directions under TERMS OF SALE OR USE at the end of this label.
RESTRICTIONS
x DO NOT apply more than 21 fl oz/A (0.49 lb ai/A) of Command 3ME Microencapsulated Herbicide per application.
x DO NOT apply more than 21 fl oz/A (0.49 lb ai/A) of Command 3ME Microencapsulated Herbicide per year.
x DO NOT make more than one application to peppermint and spearmint per year.
x Preharvest Interval (PHI): DO NOT apply within 84 days of harvest.

Rapeseed (canola varieties only) (spring canola use only)
Command 3ME Microencapsulated Herbicide may be applied as a soil applied broadcast treatment prior to seeding and weed emergenc e for
control or suppression of labeled annual grass and broadleaf weeds in spring canola.
For a list of weeds controlled, refer to Table 7 of the Vegetable Crops section above.
Command 3ME Microencapsulated Herbicide is to be used as part of a systems approach for the control of cleavers ( Galium aparine) in all
herbicide tolerant canola varieties. Applicat ion of a postemergence herbicide that is effective on cleavers, e.g. a herbicide t o which the canola
variety is tolerant, is required for season-long control. When used on non-herbicide tolerant canola varieties, Command 3ME Mic roencapsulated
Herbicide will provide some early season weed suppression only.
Apply 3.4 to 4.5 fl oz/A (0.08 to 0.11 lb ai/A) Command 3ME Microencapsulated Herbicide in a minimum spray volume of 10 gallons of water per
treated acre.
Application of less than 4.5 fl oz/A will suppress cleavers and can be used if cleaver populations are light.

23
PRECAUTION:
x Temporary whitening and/or yellowing of the crop may occur when emerging from the treated soil. Susceptible weed species may emerge
from the soil but are devoid of pigmentation and plant death occurs in a short period of time.
NOTE: Prior to use, refer to Vegetable, Oil Crops and Herbs Directions under TERMS OF SALE OR USE at the end of this label.

RESTRICTIONS
x DO NOT apply more than 4.5 fl oz/A (0.11 lb ai/A) of Command 3ME Microencapsulated Herbicide per application.
x DO NOT make more than one application to canola and rapeseed per year.
x DO NOT apply more than 4.5 fl oz/A (0.11 lb ai/A) of Command 3ME Microencapsulated Herbicide per year.
x DO NOT apply to sandy soils.
x Preharvest Interval (PHI): DO NOT apply within 90 days of harvest of canola.
HERB SUBGROUP 19A
(Angelica; balm; basil; borage; burnet; ca momile; catnip; chervil (dried); chive; ch ive, Chinese, clary; coriander (leaf);
costmary; culantro (leaf); curry (leaf) ; dillweed; horehound; hyssop; lavender ; lemongrass; lovage (leaf); marigold;
marjoram (Origanum spp.); nasturtium; parsley (dried ); pennyroyal; rosemary; rue; sage; savory, summer and winter;
sweet bay; tansy; tarragon; thyme; wintergreen; woodruff; and wormwood).
NOTE: Prior to use, refer to Vegetable, Oil Crops and Herbs Directions under TERMS OF SALE OR USE at the end of this label
Command 3ME Microencapsulated Herbicide may be applied as a soil applied broadcast treatment after seeding and prior to crop an d weed
emergence for control or suppression of labeled annual grass and broadleaf weeds in crops in Herb Subgroup 19A: angelica; balm; basil; borage;
burnet; camomile; catnip; chervil (dried); ch ive; chive, Chinese, clary; coriander/cilantro (leaf); costmary; culantro (leaf); curry (leaf); dillweed;
horehound; hyssop; lavender; lemongrass; lov age (leaf); marigold; marjoram ( Origanum spp.); nasturtium; parsley (dried); pennyroyal; rosemary;
rue; sage; savory, summer and winter; sweet bay; tansy; tarragon; thyme; wintergreen; woodruff; and wormwood.
For a list of weeds controlled, refer to Table 7 of the Vegetable Crops section above
.Apply 10 fl oz/A (0.23 lb ai/A) Command 3ME Microencapsulated Herbicide in a minimum spray volume of 10 gallons of water per t reated acre.
Make application at least 50 days prior to harvest.
RESTRICTIONS
x DO NOT apply more than 10 fl oz/A (0.23 lb ai/A) of Command 3ME Microencapsulated Herbicide per application.
x DO NOT apply more than 10 fl oz/A (0.23 lb ai/A) of Command 3ME Microencapsulated Herbicide per year.
x DO NOT make more than one application to crops in Herb Subgroup 19A: angelica; balm; basil; borage; burnet; camomile; catnip; chervil
(dried); chive; chive, Chinese, clary; co riander/cilantro (leaf); costmary; culant ro (leaf); curry (leaf); dillweed; horehound; hyssop;
lavender; lemongrass; lovage (lea f); marigold; marjoram ( Origanum spp.); nasturtium; parsley (dried); pennyroyal; rosemary; rue; sage;
savory, summer and winter; sweet bay; tansy; tarragon; thyme; wintergreen; woodruff; and wormwood per year.
x Preharvest Interval (PHI): DO NOT apply within 50 days of harvest.

24
STORAGE AND DISPOSAL
DO NOT contaminate water, food, or feed by storage or disposal.
Pesticide Storage
STORE ABOVE - 4°F TO KEEP PRODUCT  FROM FREEZING. If frozen, thaw before use. Observe recirculation directions under Mixing
and Handling Instructions for Bulk/Mini-Bulk Containers.
Keep out of reach of children and animals. Store in original c ontainers only. Store in a dry place. Carefully open containers . After partial
use, replace lids and close tightly. DO NOT put concentrate or dilute material into food or drink containers.
In case of spill, avoid contact, isolate area and keep out animals and unprotected persons. Confine spills. Call CHEMTREC (Transportation
and spills): (800) 424-9300.
To confine spill: Dike surrounding area or absorb with s and, cat litter or commercial clay. Place damaged package in a holdin g container.
Identify contents.
Pesticide Disposal
Pesticide wastes are toxic. Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of Federal law. If these wastes
cannot be disposed of by use according to label instructions, contact your State Pesticide or Environmental Control Agency or the
Hazardous Waste representative at the nearest EPA Regional Office for guidance.
Container Handling
Plastic: Non-refillable Containers: DO NOT reuse or refill this container. Triple rinse container (or equivalent) promptly after emptying.
Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after
the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a
mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times.
Then offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill or by incineration, or, if allowed by State and local
authorities, by burning. If burned, stay out of smoke.
Returnable/Refillable Sealed Containers: Refill this container with pesticide only. DO NOT reuse this container for any other purpose.
DO NOT rinse container. DO NOT empty remaining formulated product. DO NOT break seals. Return intact to point of purchase. Cleaning
the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility
of the refiller. To clean the container before final disposal, empty the remaining contents from this container into application equipment or
mix tank. Fill the container about 10 percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or
pump rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times.
Mini-Bulk Containers: These containers are property of FMC Corporation and are returnable to FMC at FMC’s discretion. These
containers are provided for repackaging of Command 3ME* Microencapsulated Herbicide and should not be filled with any other product.
Bulk Drums: Command 3ME Microencapsulated Herbicide Bulk drums are returnable to FMC Corporation for reuse when the container is
completely empty. Bulk drums containing product in excess of 1 gallon cannot be accepted for return.
Container Precautions
Before refilling, inspect thoroughly for damage such as cracks, punctures, bulges, dents, abrasions, and damaged or worn threads on
closure devices. After filling and before transporting, check for leaks.
Container Restrictions
DO NOT refill or transport a damaged or leaking container.
*Any dealer wishing to repackage Command 3ME Microencapsulated Herbicide must comply with all Federal, State and local laws
pertaining to bulk herbicide handling and possess a signed repackaging agreement from FMC Corporation.

25
Dealers Must Sell in Original Packages Only.
Terms of Sale or Use: On purchase of this product buyer and user agree to the following conditions:
Warranty: To the extent consistent with applicable la w, FMC makes no warranty, expressed or implied, concerning the use of this product o ther
than indicated on the label. To the extent consistent with appl icable law, except as so warranted the product is sold as is. To the extent consistent
with applicable law, buyer and user assume all risk of use and/or ; handling and/or storage of this material when such use and/ or handling and/or
storage is contrary to label instructions.
Directions: Follow directions carefully. Timing and method of application, weather and crop conditions, mixture with other chemicals not sp ecified
and other influencing factors in the use of this product are beyond the control of the seller and are assumed by the buyer at his own risk.
Use of Product: FMC’s instructions for the use of this product are based upon tests believed to be reliable. The use of this product being beyo nd
the control of the manufacturer, no guarantee, expressed or implied is made as to the effects of such or the results to be obta ined if not used in
accordance with directions or established safe practice.
Damages: To the extent consistent with applicable law, buyer’s or user’s exclusive remedy for damages for breach of warranty or negligen ce shall
be limited to direct damages not exceeding the purchase price paid and shall not include incidental or consequential damages.
Vegetable, Oil Crops and Herbs Directions: FMC Corporation intends that this product be dist ributed only to end users and/or growers (and/or
applicators acting on behalf of growers) who agree to the terms and conditions below, and understand the directions regarding use Command 3ME
Microencapsulated Herbicide in pre-emergence ground treatments on b eans (dry and succulent, except lima), Brassica head and ste m vegetable
group 5-16, Chinese broccoli, Cucurbit Vegetables Crop Group 9, edamame (vegetable soybean), kohlrabi, HERBS Subgroup 19A, lima beans,
peas (Succulent), peppermint tops, peppers, pumpkins, Rapeseed (c anola varieties only), rhubarb, spearmint tops, Stalk and Stem Vegetable
Subgroup 22A, Summer and Winter squash, sweet potatoes, Tuberous and Corm Vegetables Subgroup 1D.
If such directions are unacceptable, FMC requests the return of Command 3ME Microencapsulated Herbicide at once unopened. FMC c onsiders
the user to have read and understood such directions upon use of this product.
This product when used as a pre-emergence ground treatment on beans (dry and succulent, except lima), Brassica head and stem vegetable group
5-16, Chinese broccoli, Cucurbit Vegetab les Crop Group 9, edamame (vegetable soybean) , kohlrabi, HERBS Subgroup 19A, lima beans , peas
(Succulent), peppermint tops, peppers, pumpkins, Rapeseed (canola varieties only), rhubarb, spearmint tops, Stalk and Stem Vege table Subgroup
22A, Summer and Winter squash, sweet potatoes, Tuberous and Corm Vegetables Subgroup 1D may lead to crop injury, loss, or damag e. FMC
advises that the user and/or grower test this product in order to determine its suitability for such intended use. FMC makes th is product available to
the user and/or grower solely to the extent the benefit and utility, in the sole opinion of the user and/or grower, outweigh the extent of potential injury
associated with the use of this product. The decision to use or not to use this product must be made by each individual user an d/or grower on the
basis of possible crop injury from Command 3ME Microencapsulated Herbicide, the severity of weed infestations, the cost of alte rnative weed
controls, and other factors.

Conditions of Sale and Limitation of Warranty and Liability:
NOTICE: Read the entire Directions for Use and Conditions of Sale and Limi tation of Warranty and Liability before buying or using this
product. If the terms are not acceptable, return the product at once, unopened, and the purchase price will be refunded.
The Directions for Use of this product must be followed carefully. It is impossible to eliminate all risks inherently associate d with the use of this
product. Crop injury, ineffectiveness, or other unintended consequences may result because of such factors as manner of use or application,
weather or crop conditions beyond the control of FMC or Seller. To the extent consistent with applicable law, all such risks sh all be assumed by
Buyer and User, and Buyer and User agree to hold FMC and Seller harmless for any claims relating to such factors.
Seller warrants that this product conforms to the chemical desc ription on the label and is reasonably fit for the purposes stat ed on the
Directions for Use when used in accordance wi th the directions under normal conditions of use. TO THE EXTENT CONSISTENT WITH
APPLICABLE LAW, FMC MAKES NO WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE, NOR ANY
OTHER EXPRESS OR IMPLIED WARRANTIES WITH RESPECT TO THE SELECTION,
PURCHASE, OR USE OF THIS PRODUCT. Any warranties, express or implied, having been made are inapplicable if this product has been
contrary to label instructions, or under abnormal conditions, or under conditions not reasonably foreseeable to (or beyond the control of)
Seller or FMC, and Buyer assumes the risk of any such use.
To the extent consistent with applicable law, FMC or Seller shall not be liable for any incidental, consequential or special da mages resulting from
the use or handling of this product. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER OR
BUYER, AND THE EXCLUSIVE LIABILITY OF FMC AND SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES
(INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE)
RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SHALL BE THE RETURN OF THE PURCHASE PRICE OF THE PRODUCT
OR, AT THE ELECTION OF FMC OR SELLER, THE REPLACEMENT OF THE PRODUCT.
This Conditions of Sale and Limitation of Warranty and Liability may not be amended by any oral or written agreement.

NOTICE TO BUYER -- Purchase of this material does not confer any rights under patents of countries outside of the United States.

FMC, the FMC logo, and COMMAND are trademarks of FMC Corporation and/or an affiliate.

© 2025 FMC Corporation All rights reserved.

Label Tracking Information
Label Code: D-4958 042726